diff options
Diffstat (limited to 'arch')
364 files changed, 1752 insertions, 1528 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 84449dd..a91009c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -293,6 +293,7 @@ config ARCH_VERSATILE select ICST select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB + select NEED_MACH_IO_H if PCI select PLAT_VERSATILE select PLAT_VERSATILE_CLCD select PLAT_VERSATILE_FPGA_IRQ @@ -588,6 +589,7 @@ config ARCH_ORION5X select PCI select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS + select NEED_MACH_IO_H select PLAT_ORION help Support for the following Marvell Orion 5x series SoCs: diff --git a/arch/arm/boot/dts/mmp2-brownstone.dts b/arch/arm/boot/dts/mmp2-brownstone.dts index 153a4b2..c9b4f27 100644 --- a/arch/arm/boot/dts/mmp2-brownstone.dts +++ b/arch/arm/boot/dts/mmp2-brownstone.dts @@ -11,7 +11,7 @@ /include/ "mmp2.dtsi" / { - model = "Marvell MMP2 Aspenite Development Board"; + model = "Marvell MMP2 Brownstone Development Board"; compatible = "mrvl,mmp2-brownstone", "mrvl,mmp2"; chosen { @@ -19,7 +19,7 @@ }; memory { - reg = <0x00000000 0x04000000>; + reg = <0x00000000 0x08000000>; }; soc { diff --git a/arch/arm/boot/dts/omap2.dtsi b/arch/arm/boot/dts/omap2.dtsi index f2ab4ea..581cb08 100644 --- a/arch/arm/boot/dts/omap2.dtsi +++ b/arch/arm/boot/dts/omap2.dtsi @@ -44,6 +44,8 @@ compatible = "ti,omap2-intc"; interrupt-controller; #interrupt-cells = <1>; + ti,intc-size = <96>; + reg = <0x480FE000 0x1000>; }; uart1: serial@4806a000 { diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts index 8314e41..dd4358b 100644 --- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr1310 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi index 9e61da4..419ea74 100644 --- a/arch/arm/boot/dts/spear1310.dtsi +++ b/arch/arm/boot/dts/spear1310.dtsi @@ -1,7 +1,7 @@ /* * DTS file for all SPEAr1310 SoCs * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts index 0d8472e..c9a54e0 100644 --- a/arch/arm/boot/dts/spear1340-evb.dts +++ b/arch/arm/boot/dts/spear1340-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr1340 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi index a26fc47..d71fe2a 100644 --- a/arch/arm/boot/dts/spear1340.dtsi +++ b/arch/arm/boot/dts/spear1340.dtsi @@ -1,7 +1,7 @@ /* * DTS file for all SPEAr1340 SoCs * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi index 1f8e1e1..f7b84ac 100644 --- a/arch/arm/boot/dts/spear13xx.dtsi +++ b/arch/arm/boot/dts/spear13xx.dtsi @@ -1,7 +1,7 @@ /* * DTS file for all SPEAr13xx SoCs * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License @@ -43,8 +43,8 @@ pmu { compatible = "arm,cortex-a9-pmu"; - interrupts = <0 8 0x04 - 0 9 0x04>; + interrupts = <0 6 0x04 + 0 7 0x04>; }; L2: l2-cache { @@ -119,8 +119,8 @@ gmac0: eth@e2000000 { compatible = "st,spear600-gmac"; reg = <0xe2000000 0x8000>; - interrupts = <0 23 0x4 - 0 24 0x4>; + interrupts = <0 33 0x4 + 0 34 0x4>; interrupt-names = "macirq", "eth_wake_irq"; status = "disabled"; }; @@ -202,6 +202,7 @@ kbd@e0300000 { compatible = "st,spear300-kbd"; reg = <0xe0300000 0x1000>; + interrupts = <0 52 0x4>; status = "disabled"; }; @@ -224,7 +225,7 @@ serial@e0000000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xe0000000 0x1000>; - interrupts = <0 36 0x4>; + interrupts = <0 35 0x4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts index fc82b1a..d71b8d5 100644 --- a/arch/arm/boot/dts/spear300-evb.dts +++ b/arch/arm/boot/dts/spear300-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr300 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear300.dtsi b/arch/arm/boot/dts/spear300.dtsi index 01c5e35..ed3627c 100644 --- a/arch/arm/boot/dts/spear300.dtsi +++ b/arch/arm/boot/dts/spear300.dtsi @@ -1,7 +1,7 @@ /* * DTS file for SPEAr300 SoC * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear310-evb.dts b/arch/arm/boot/dts/spear310-evb.dts index dc5e2d4..b00544e 100644 --- a/arch/arm/boot/dts/spear310-evb.dts +++ b/arch/arm/boot/dts/spear310-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr310 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear310.dtsi b/arch/arm/boot/dts/spear310.dtsi index e47081c..62fc4fb 100644 --- a/arch/arm/boot/dts/spear310.dtsi +++ b/arch/arm/boot/dts/spear310.dtsi @@ -1,7 +1,7 @@ /* * DTS file for SPEAr310 SoC * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts index 6308fa3..e4e912f 100644 --- a/arch/arm/boot/dts/spear320-evb.dts +++ b/arch/arm/boot/dts/spear320-evb.dts @@ -1,7 +1,7 @@ /* * DTS file for SPEAr320 Evaluation Baord * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License @@ -15,8 +15,8 @@ /include/ "spear320.dtsi" / { - model = "ST SPEAr300 Evaluation Board"; - compatible = "st,spear300-evb", "st,spear300"; + model = "ST SPEAr320 Evaluation Board"; + compatible = "st,spear320-evb", "st,spear320"; #address-cells = <1>; #size-cells = <1>; @@ -26,7 +26,7 @@ ahb { pinmux@b3000000 { - st,pinmux-mode = <3>; + st,pinmux-mode = <4>; pinctrl-names = "default"; pinctrl-0 = <&state_default>; diff --git a/arch/arm/boot/dts/spear320.dtsi b/arch/arm/boot/dts/spear320.dtsi index 5372ca3..1f49d69 100644 --- a/arch/arm/boot/dts/spear320.dtsi +++ b/arch/arm/boot/dts/spear320.dtsi @@ -1,7 +1,7 @@ /* * DTS file for SPEAr320 SoC * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear3xx.dtsi b/arch/arm/boot/dts/spear3xx.dtsi index 9107255..3a8bb57 100644 --- a/arch/arm/boot/dts/spear3xx.dtsi +++ b/arch/arm/boot/dts/spear3xx.dtsi @@ -1,7 +1,7 @@ /* * DTS file for all SPEAr3xx SoCs * - * Copyright 2012 Viresh Kumar <viresh.kumar@st.com> + * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com> * * The code contained herein is licensed under the GNU General Public * License. You may obtain a copy of the GNU General Public License diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi index 089f0a4..a3c36e4 100644 --- a/arch/arm/boot/dts/spear600.dtsi +++ b/arch/arm/boot/dts/spear600.dtsi @@ -181,6 +181,7 @@ timer@f0000000 { compatible = "st,spear-timer"; reg = <0xf0000000 0x400>; + interrupt-parent = <&vic0>; interrupts = <16>; }; }; diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index 9d7eb53..aa07f59 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -366,8 +366,8 @@ static int __dmabounce_sync_for_cpu(struct device *dev, dma_addr_t addr, struct safe_buffer *buf; unsigned long off; - dev_dbg(dev, "%s(dma=%#x,off=%#lx,sz=%zx,dir=%x)\n", - __func__, addr, off, sz, dir); + dev_dbg(dev, "%s(dma=%#x,sz=%zx,dir=%x)\n", + __func__, addr, sz, dir); buf = find_safe_buffer_dev(dev, addr, __func__); if (!buf) @@ -377,8 +377,8 @@ static int __dmabounce_sync_for_cpu(struct device *dev, dma_addr_t addr, BUG_ON(buf->direction != dir); - dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n", - __func__, buf->ptr, virt_to_dma(dev, buf->ptr), + dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x off=%#lx) mapped to %p (dma=%#x)\n", + __func__, buf->ptr, virt_to_dma(dev, buf->ptr), off, buf->safe, buf->safe_dma_addr); DO_STATS(dev->archdata.dmabounce->bounce_count++); @@ -406,8 +406,8 @@ static int __dmabounce_sync_for_device(struct device *dev, dma_addr_t addr, struct safe_buffer *buf; unsigned long off; - dev_dbg(dev, "%s(dma=%#x,off=%#lx,sz=%zx,dir=%x)\n", - __func__, addr, off, sz, dir); + dev_dbg(dev, "%s(dma=%#x,sz=%zx,dir=%x)\n", + __func__, addr, sz, dir); buf = find_safe_buffer_dev(dev, addr, __func__); if (!buf) @@ -417,8 +417,8 @@ static int __dmabounce_sync_for_device(struct device *dev, dma_addr_t addr, BUG_ON(buf->direction != dir); - dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n", - __func__, buf->ptr, virt_to_dma(dev, buf->ptr), + dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x off=%#lx) mapped to %p (dma=%#x)\n", + __func__, buf->ptr, virt_to_dma(dev, buf->ptr), off, buf->safe, buf->safe_dma_addr); DO_STATS(dev->archdata.dmabounce->bounce_count++); diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 9854ff4..11828e6 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -176,7 +176,6 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_DEVICEFS=y CONFIG_USB_SUSPEND=y CONFIG_USB_MON=y -CONFIG_USB_EHCI_HCD=y CONFIG_USB_WDM=y CONFIG_USB_STORAGE=y CONFIG_USB_LIBUSUAL=y diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h index 68374ba..c79f61f 100644 --- a/arch/arm/include/asm/atomic.h +++ b/arch/arm/include/asm/atomic.h @@ -243,7 +243,7 @@ typedef struct { #define ATOMIC64_INIT(i) { (i) } -static inline u64 atomic64_read(atomic64_t *v) +static inline u64 atomic64_read(const atomic64_t *v) { u64 result; diff --git a/arch/arm/include/asm/domain.h b/arch/arm/include/asm/domain.h index 3d22204..6ddbe44 100644 --- a/arch/arm/include/asm/domain.h +++ b/arch/arm/include/asm/domain.h @@ -60,13 +60,13 @@ #ifndef __ASSEMBLY__ #ifdef CONFIG_CPU_USE_DOMAINS -#define set_domain(x) \ - do { \ - __asm__ __volatile__( \ - "mcr p15, 0, %0, c3, c0 @ set domain" \ - : : "r" (x)); \ - isb(); \ - } while (0) +static inline void set_domain(unsigned val) +{ + asm volatile( + "mcr p15, 0, %0, c3, c0 @ set domain" + : : "r" (val)); + isb(); +} #define modify_domain(dom,type) \ do { \ @@ -78,8 +78,8 @@ } while (0) #else -#define set_domain(x) do { } while (0) -#define modify_domain(dom,type) do { } while (0) +static inline void set_domain(unsigned val) { } +static inline void modify_domain(unsigned dom, unsigned type) { } #endif /* diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h index 7be5469..e42cf59 100644 --- a/arch/arm/include/asm/futex.h +++ b/arch/arm/include/asm/futex.h @@ -19,6 +19,7 @@ " .long 1b, 4f, 2b, 4f\n" \ " .popsection\n" \ " .pushsection .fixup,\"ax\"\n" \ + " .align 2\n" \ "4: mov %0, " err_reg "\n" \ " b 3b\n" \ " .popsection" diff --git a/arch/arm/include/asm/hardware/sp810.h b/arch/arm/include/asm/hardware/sp810.h index e0d1c0c..6b9b077 100644 --- a/arch/arm/include/asm/hardware/sp810.h +++ b/arch/arm/include/asm/hardware/sp810.h @@ -4,7 +4,7 @@ * ARM PrimeXsys System Controller SP810 header file * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index b79f8e9..af7b0bd 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -148,7 +148,6 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *, #define TIF_NOTIFY_RESUME 2 /* callback before returning to user */ #define TIF_SYSCALL_TRACE 8 #define TIF_SYSCALL_AUDIT 9 -#define TIF_SYSCALL_RESTARTSYS 10 #define TIF_POLLING_NRFLAG 16 #define TIF_USING_IWMMXT 17 #define TIF_MEMDIE 18 /* is terminating due to OOM killer */ @@ -164,11 +163,9 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *, #define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) #define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT) #define _TIF_SECCOMP (1 << TIF_SECCOMP) -#define _TIF_SYSCALL_RESTARTSYS (1 << TIF_SYSCALL_RESTARTSYS) /* Checks for any syscall work in entry-common.S */ -#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \ - _TIF_SYSCALL_RESTARTSYS) +#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT) /* * Change these and you break ASM code in entry-common.S diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 437f0c4..0d1851c 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -495,6 +495,7 @@ ENDPROC(__und_usr) * The out of line fixup for the ldrt above. */ .pushsection .fixup, "ax" + .align 2 4: mov pc, r9 .popsection .pushsection __ex_table,"a" diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c index ba32b39..38c1a3b 100644 --- a/arch/arm/kernel/kprobes-test-arm.c +++ b/arch/arm/kernel/kprobes-test-arm.c @@ -187,8 +187,8 @@ void kprobe_arm_test_cases(void) TEST_BF_R ("mov pc, r",0,2f,"") TEST_BF_RR("mov pc, r",0,2f,", asl r",1,0,"") TEST_BB( "sub pc, pc, #1b-2b+8") -#if __LINUX_ARM_ARCH__ >= 6 - TEST_BB( "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before ARMv6 */ +#if __LINUX_ARM_ARCH__ == 6 && !defined(CONFIG_CPU_V7) + TEST_BB( "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before and after ARMv6 */ #endif TEST_BB_R( "sub pc, pc, r",14, 1f-2f+8,"") TEST_BB_R( "rsb pc, r",14,1f-2f+8,", pc") diff --git a/arch/arm/kernel/kprobes-thumb.c b/arch/arm/kernel/kprobes-thumb.c index 8f96ec7..6123daf 100644 --- a/arch/arm/kernel/kprobes-thumb.c +++ b/arch/arm/kernel/kprobes-thumb.c @@ -660,7 +660,7 @@ static const union decode_item t32_table_1111_100x[] = { /* LDRSB (literal) 1111 1001 x001 1111 xxxx xxxx xxxx xxxx */ /* LDRH (literal) 1111 1000 x011 1111 xxxx xxxx xxxx xxxx */ /* LDRSH (literal) 1111 1001 x011 1111 xxxx xxxx xxxx xxxx */ - DECODE_EMULATEX (0xfe5f0000, 0xf81f0000, t32_simulate_ldr_literal, + DECODE_SIMULATEX(0xfe5f0000, 0xf81f0000, t32_simulate_ldr_literal, REGS(PC, NOSPPCX, 0, 0, 0)), /* STRB (immediate) 1111 1000 0000 xxxx xxxx 1xxx xxxx xxxx */ diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 186c8cb..a02eada 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -503,7 +503,7 @@ __hw_perf_event_init(struct perf_event *event) event_requires_mode_exclusion(&event->attr)) { pr_debug("ARM performance counters do not support " "mode exclusion\n"); - return -EPERM; + return -EOPNOTSUPP; } /* diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 5700a7a..14e3826 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -25,7 +25,6 @@ #include <linux/regset.h> #include <linux/audit.h> #include <linux/tracehook.h> -#include <linux/unistd.h> #include <asm/pgtable.h> #include <asm/traps.h> @@ -918,8 +917,6 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0, regs->ARM_r1, regs->ARM_r2, regs->ARM_r3); - if (why == 0 && test_and_clear_thread_flag(TIF_SYSCALL_RESTARTSYS)) - scno = __NR_restart_syscall - __NR_SYSCALL_BASE; if (!test_thread_flag(TIF_SYSCALL_TRACE)) return scno; diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index fd2392a..536c5d6 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -27,6 +27,7 @@ */ #define SWI_SYS_SIGRETURN (0xef000000|(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE)) #define SWI_SYS_RT_SIGRETURN (0xef000000|(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE)) +#define SWI_SYS_RESTART (0xef000000|__NR_restart_syscall|__NR_OABI_SYSCALL_BASE) /* * With EABI, the syscall number has to be loaded into r7. @@ -47,6 +48,18 @@ const unsigned long sigreturn_codes[7] = { }; /* + * Either we support OABI only, or we have EABI with the OABI + * compat layer enabled. In the later case we don't know if + * user space is EABI or not, and if not we must not clobber r7. + * Always using the OABI syscall solves that issue and works for + * all those cases. + */ +const unsigned long syscall_restart_code[2] = { + SWI_SYS_RESTART, /* swi __NR_restart_syscall */ + 0xe49df004, /* ldr pc, [sp], #4 */ +}; + +/* * atomically swap in the new signal mask, and wait for a signal. */ asmlinkage int sys_sigsuspend(int restart, unsigned long oldmask, old_sigset_t mask) @@ -592,10 +605,12 @@ static void do_signal(struct pt_regs *regs, int syscall) case -ERESTARTNOHAND: case -ERESTARTSYS: case -ERESTARTNOINTR: - case -ERESTART_RESTARTBLOCK: regs->ARM_r0 = regs->ARM_ORIG_r0; regs->ARM_pc = restart_addr; break; + case -ERESTART_RESTARTBLOCK: + regs->ARM_r0 = -EINTR; + break; } } @@ -611,14 +626,12 @@ static void do_signal(struct pt_regs *regs, int syscall) * debugger has chosen to restart at a different PC. */ if (regs->ARM_pc == restart_addr) { - if (retval == -ERESTARTNOHAND || - retval == -ERESTART_RESTARTBLOCK + if (retval == -ERESTARTNOHAND || (retval == -ERESTARTSYS && !(ka.sa.sa_flags & SA_RESTART))) { regs->ARM_r0 = -EINTR; regs->ARM_pc = continue_addr; } - clear_thread_flag(TIF_SYSCALL_RESTARTSYS); } handle_signal(signr, &ka, &info, regs); @@ -632,8 +645,29 @@ static void do_signal(struct pt_regs *regs, int syscall) * ignore the restart. */ if (retval == -ERESTART_RESTARTBLOCK - && regs->ARM_pc == restart_addr) - set_thread_flag(TIF_SYSCALL_RESTARTSYS); + && regs->ARM_pc == continue_addr) { + if (thumb_mode(regs)) { + regs->ARM_r7 = __NR_restart_syscall - __NR_SYSCALL_BASE; + regs->ARM_pc -= 2; + } else { +#if defined(CONFIG_AEABI) && !defined(CONFIG_OABI_COMPAT) + regs->ARM_r7 = __NR_restart_syscall; + regs->ARM_pc -= 4; +#else + u32 __user *usp; + + regs->ARM_sp -= 4; + usp = (u32 __user *)regs->ARM_sp; + + if (put_user(regs->ARM_pc, usp) == 0) { + regs->ARM_pc = KERN_RESTART_CODE; + } else { + regs->ARM_sp += 4; + force_sigsegv(0, current); + } +#endif + } + } } restore_saved_sigmask(); diff --git a/arch/arm/kernel/signal.h b/arch/arm/kernel/signal.h index 5ff067b7..6fcfe83 100644 --- a/arch/arm/kernel/signal.h +++ b/arch/arm/kernel/signal.h @@ -8,5 +8,7 @@ * published by the Free Software Foundation. */ #define KERN_SIGRETURN_CODE (CONFIG_VECTORS_BASE + 0x00000500) +#define KERN_RESTART_CODE (KERN_SIGRETURN_CODE + sizeof(sigreturn_codes)) extern const unsigned long sigreturn_codes[7]; +extern const unsigned long syscall_restart_code[2]; diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 4928d89..3647170 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -820,6 +820,8 @@ void __init early_trap_init(void *vectors_base) */ memcpy((void *)(vectors + KERN_SIGRETURN_CODE - CONFIG_VECTORS_BASE), sigreturn_codes, sizeof(sigreturn_codes)); + memcpy((void *)(vectors + KERN_RESTART_CODE - CONFIG_VECTORS_BASE), + syscall_restart_code, sizeof(syscall_restart_code)); flush_icache_range(vectors, vectors + PAGE_SIZE); modify_domain(DOMAIN_USER, DOMAIN_CLIENT); diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 43a31fb..36ff15b 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -183,7 +183,9 @@ SECTIONS } #endif +#ifdef CONFIG_SMP PERCPU_SECTION(L1_CACHE_BYTES) +#endif #ifdef CONFIG_XIP_KERNEL __data_loc = ALIGN(4); /* location in binary */ diff --git a/arch/arm/mach-dove/include/mach/bridge-regs.h b/arch/arm/mach-dove/include/mach/bridge-regs.h index 226949d..f953bb5 100644 --- a/arch/arm/mach-dove/include/mach/bridge-regs.h +++ b/arch/arm/mach-dove/include/mach/bridge-regs.h @@ -50,5 +50,6 @@ #define POWER_MANAGEMENT (BRIDGE_VIRT_BASE | 0x011c) #define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) +#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300) #endif diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h index ad1165d..d52b0ef 100644 --- a/arch/arm/mach-dove/include/mach/dove.h +++ b/arch/arm/mach-dove/include/mach/dove.h @@ -78,6 +78,7 @@ /* North-South Bridge */ #define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x20000) +#define BRIDGE_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x20000) /* Cryptographic Engine */ #define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x30000) diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 573be57..6f6d13f 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -212,7 +212,7 @@ config MACH_SMDKV310 select EXYNOS_DEV_SYSMMU select EXYNOS4_DEV_AHCI select SAMSUNG_DEV_KEYPAD - select EXYNOS4_DEV_DMA + select EXYNOS_DEV_DMA select SAMSUNG_DEV_PWM select EXYNOS4_DEV_USB_OHCI select EXYNOS4_SETUP_FIMD0 @@ -264,7 +264,7 @@ config MACH_UNIVERSAL_C210 select S5P_DEV_ONENAND select S5P_DEV_TV select EXYNOS_DEV_SYSMMU - select EXYNOS4_DEV_DMA + select EXYNOS_DEV_DMA select EXYNOS_DEV_DRM select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_I2C1 @@ -303,7 +303,7 @@ config MACH_NURI select S5P_DEV_MFC select S5P_DEV_USB_EHCI select S5P_SETUP_MIPIPHY - select EXYNOS4_DEV_DMA + select EXYNOS_DEV_DMA select EXYNOS_DEV_DRM select EXYNOS4_SETUP_FIMC select EXYNOS4_SETUP_FIMD0 @@ -341,7 +341,7 @@ config MACH_ORIGEN select SAMSUNG_DEV_PWM select EXYNOS_DEV_DRM select EXYNOS_DEV_SYSMMU - select EXYNOS4_DEV_DMA + select EXYNOS_DEV_DMA select EXYNOS4_DEV_USB_OHCI select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_SDHCI diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index e9fafcf..373c3c0 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -119,7 +119,9 @@ static __init void exynos_pm_add_dev_to_genpd(struct platform_device *pdev, struct exynos_pm_domain *pd) { if (pdev->dev.bus) { - if (pm_genpd_add_device(&pd->pd, &pdev->dev)) + if (!pm_genpd_add_device(&pd->pd, &pdev->dev)) + pm_genpd_dev_need_restore(&pdev->dev, true); + else pr_info("%s: error in adding %s device to %s power" "domain\n", __func__, dev_name(&pdev->dev), pd->name); @@ -151,9 +153,12 @@ static __init int exynos4_pm_init_power_domain(void) if (of_have_populated_dt()) return exynos_pm_dt_parse_domains(); - for (idx = 0; idx < ARRAY_SIZE(exynos4_pm_domains); idx++) - pm_genpd_init(&exynos4_pm_domains[idx]->pd, NULL, - exynos4_pm_domains[idx]->is_off); + for (idx = 0; idx < ARRAY_SIZE(exynos4_pm_domains); idx++) { + struct exynos_pm_domain *pd = exynos4_pm_domains[idx]; + int on = __raw_readl(pd->base + 0x4) & S5P_INT_LOCAL_PWR_EN; + + pm_genpd_init(&pd->pd, NULL, !on); + } #ifdef CONFIG_S5P_DEV_FIMD0 exynos_pm_add_dev_to_genpd(&s5p_device_fimd0, &exynos4_pd_lcd0); diff --git a/arch/arm/mach-highbank/Makefile b/arch/arm/mach-highbank/Makefile index f8437dd2..ded4652 100644 --- a/arch/arm/mach-highbank/Makefile +++ b/arch/arm/mach-highbank/Makefile @@ -1,4 +1,8 @@ -obj-y := clock.o highbank.o system.o +obj-y := clock.o highbank.o system.o smc.o + +plus_sec := $(call as-instr,.arch_extension sec,+sec) +AFLAGS_smc.o :=-Wa,-march=armv7-a$(plus_sec) + obj-$(CONFIG_DEBUG_HIGHBANK_UART) += lluart.o obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-highbank/core.h b/arch/arm/mach-highbank/core.h index d8e2d0b..141ed51 100644 --- a/arch/arm/mach-highbank/core.h +++ b/arch/arm/mach-highbank/core.h @@ -8,3 +8,4 @@ extern void highbank_lluart_map_io(void); static inline void highbank_lluart_map_io(void) {} #endif +extern void highbank_smc1(int fn, int arg); diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index 410a112..8777612 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -85,10 +85,24 @@ const static struct of_device_id irq_match[] = { {} }; +#ifdef CONFIG_CACHE_L2X0 +static void highbank_l2x0_disable(void) +{ + /* Disable PL310 L2 Cache controller */ + highbank_smc1(0x102, 0x0); +} +#endif + static void __init highbank_init_irq(void) { of_irq_init(irq_match); + +#ifdef CONFIG_CACHE_L2X0 + /* Enable PL310 L2 Cache controller */ + highbank_smc1(0x102, 0x1); l2x0_of_init(0, ~0UL); + outer_cache.disable = highbank_l2x0_disable; +#endif } static void __init highbank_timer_init(void) diff --git a/arch/arm/mach-highbank/smc.S b/arch/arm/mach-highbank/smc.S new file mode 100644 index 0000000..407d17b --- /dev/null +++ b/arch/arm/mach-highbank/smc.S @@ -0,0 +1,27 @@ +/* + * Copied from omap44xx-smc.S Copyright (C) 2010 Texas Instruments, Inc. + * Copyright 2012 Calxeda, Inc. + * + * This program is free software,you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/linkage.h> + +/* + * This is common routine to manage secure monitor API + * used to modify the PL310 secure registers. + * 'r0' contains the value to be modified and 'r12' contains + * the monitor API number. + * Function signature : void highbank_smc1(u32 fn, u32 arg) + */ + +ENTRY(highbank_smc1) + stmfd sp!, {r4-r11, lr} + mov r12, r0 + mov r0, r1 + dsb + smc #0 + ldmfd sp!, {r4-r11, pc} +ENDPROC(highbank_smc1) diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 0021f72..eff4db5 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -477,6 +477,7 @@ config MACH_MX31_3DS select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_KEYPAD + select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_IPU_CORE select IMX_HAVE_PLATFORM_MXC_EHCI diff --git a/arch/arm/mach-imx/clk-imx1.c b/arch/arm/mach-imx/clk-imx1.c index 0f0beb5..516ddee 100644 --- a/arch/arm/mach-imx/clk-imx1.c +++ b/arch/arm/mach-imx/clk-imx1.c @@ -108,8 +108,7 @@ int __init mx1_clocks_init(unsigned long fref) clk_register_clkdev(clk[clk32], NULL, "mxc_rtc.0"); clk_register_clkdev(clk[clko], "clko", NULL); - mxc_timer_init(NULL, MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), - MX1_TIM1_INT); + mxc_timer_init(MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), MX1_TIM1_INT); return 0; } diff --git a/arch/arm/mach-imx/clk-imx21.c b/arch/arm/mach-imx/clk-imx21.c index 4e4f384..ea13e61 100644 --- a/arch/arm/mach-imx/clk-imx21.c +++ b/arch/arm/mach-imx/clk-imx21.c @@ -180,7 +180,7 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href) clk_register_clkdev(clk[sdhc1_ipg_gate], "sdhc1", NULL); clk_register_clkdev(clk[sdhc2_ipg_gate], "sdhc2", NULL); - mxc_timer_init(NULL, MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR), - MX21_INT_GPT1); + mxc_timer_init(MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR), MX21_INT_GPT1); + return 0; } diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index d9833bb..fdd8cc8 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -243,6 +243,6 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[sdma_ahb], "ahb", "imx35-sdma"); clk_register_clkdev(clk[iim_ipg], "iim", NULL); - mxc_timer_init(NULL, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54); + mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54); return 0; } diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index 50a7ebd..295cbd7 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -263,8 +263,7 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[ssi1_baud_gate], "bitrate" , "imx-ssi.0"); clk_register_clkdev(clk[ssi2_baud_gate], "bitrate" , "imx-ssi.1"); - mxc_timer_init(NULL, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), - MX27_INT_GPT1); + mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1); clk_prepare_enable(clk[emi_ahb_gate]); diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c index a854b9c..c9a06d8 100644 --- a/arch/arm/mach-imx/clk-imx31.c +++ b/arch/arm/mach-imx/clk-imx31.c @@ -175,8 +175,7 @@ int __init mx31_clocks_init(unsigned long fref) mx31_revision(); clk_disable_unprepare(clk[iim_gate]); - mxc_timer_init(NULL, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR), - MX31_INT_GPT); + mxc_timer_init(MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR), MX31_INT_GPT); return 0; } diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index a9e60bf..c6422fb 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c @@ -201,7 +201,6 @@ int __init mx35_clocks_init() pr_err("i.MX35 clk %d: register failed with %ld\n", i, PTR_ERR(clk[i])); - clk_register_clkdev(clk[pata_gate], NULL, "pata_imx"); clk_register_clkdev(clk[can1_gate], NULL, "flexcan.0"); clk_register_clkdev(clk[can2_gate], NULL, "flexcan.1"); @@ -264,14 +263,20 @@ int __init mx35_clocks_init() clk_prepare_enable(clk[iim_gate]); clk_prepare_enable(clk[emi_gate]); + /* + * SCC is needed to boot via mmc after a watchdog reset. The clock code + * before conversion to common clk also enabled UART1 (which isn't + * handled here and not needed for mmc) and IIM (which is enabled + * unconditionally above). + */ + clk_prepare_enable(clk[scc_gate]); + imx_print_silicon_rev("i.MX35", mx35_revision()); #ifdef CONFIG_MXC_USE_EPIT - epit_timer_init(&epit1_clk, - MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1); + epit_timer_init(MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1); #else - mxc_timer_init(NULL, MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), - MX35_INT_GPT); + mxc_timer_init(MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT); #endif return 0; diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index fcd94f3..a2200c7 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -104,12 +104,12 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, periph_apm_sel, ARRAY_SIZE(periph_apm_sel)); clk[main_bus] = imx_clk_mux("main_bus", MXC_CCM_CBCDR, 25, 1, main_bus_sel, ARRAY_SIZE(main_bus_sel)); - clk[per_lp_apm] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCDR, 1, 1, + clk[per_lp_apm] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCMR, 1, 1, per_lp_apm_sel, ARRAY_SIZE(per_lp_apm_sel)); clk[per_pred1] = imx_clk_divider("per_pred1", "per_lp_apm", MXC_CCM_CBCDR, 6, 2); clk[per_pred2] = imx_clk_divider("per_pred2", "per_pred1", MXC_CCM_CBCDR, 3, 3); clk[per_podf] = imx_clk_divider("per_podf", "per_pred2", MXC_CCM_CBCDR, 0, 3); - clk[per_root] = imx_clk_mux("per_root", MXC_CCM_CBCDR, 1, 0, + clk[per_root] = imx_clk_mux("per_root", MXC_CCM_CBCMR, 0, 1, per_root_sel, ARRAY_SIZE(per_root_sel)); clk[ahb] = imx_clk_divider("ahb", "main_bus", MXC_CCM_CBCDR, 10, 3); clk[ahb_max] = imx_clk_gate2("ahb_max", "ahb", MXC_CCM_CCGR0, 28); @@ -172,7 +172,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk[pwm1_hf_gate] = imx_clk_gate2("pwm1_hf_gate", "ipg", MXC_CCM_CCGR2, 12); clk[pwm2_ipg_gate] = imx_clk_gate2("pwm2_ipg_gate", "ipg", MXC_CCM_CCGR2, 14); clk[pwm2_hf_gate] = imx_clk_gate2("pwm2_hf_gate", "ipg", MXC_CCM_CCGR2, 16); - clk[gpt_gate] = imx_clk_gate2("gpt_gate", "ipg", MXC_CCM_CCGR2, 18); + clk[gpt_gate] = imx_clk_gate2("gpt_gate", "per_root", MXC_CCM_CCGR2, 18); clk[fec_gate] = imx_clk_gate2("fec_gate", "ipg", MXC_CCM_CCGR2, 24); clk[usboh3_gate] = imx_clk_gate2("usboh3_gate", "ipg", MXC_CCM_CCGR2, 26); clk[usboh3_per_gate] = imx_clk_gate2("usboh3_per_gate", "usboh3_podf", MXC_CCM_CCGR2, 28); @@ -366,8 +366,7 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_set_rate(clk[esdhc_b_podf], 166250000); /* System timer */ - mxc_timer_init(NULL, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR), - MX51_INT_GPT); + mxc_timer_init(MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR), MX51_INT_GPT); clk_prepare_enable(clk[iim_gate]); imx_print_silicon_rev("i.MX51", mx51_revision()); @@ -452,8 +451,7 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_set_rate(clk[esdhc_b_podf], 200000000); /* System timer */ - mxc_timer_init(NULL, MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR), - MX53_INT_GPT); + mxc_timer_init(MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR), MX53_INT_GPT); clk_prepare_enable(clk[iim_gate]); imx_print_silicon_rev("i.MX53", mx53_revision()); diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index cab02d0..e1a17ac 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -122,10 +122,6 @@ static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5 "dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0", "ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio", }; -static const char * const clks_init_on[] __initconst = { - "mmdc_ch0_axi", "mmdc_ch1_axi", "usboh3", -}; - enum mx6q_clks { dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m, pll3_pfd0_720m, pll3_pfd1_540m, pll3_pfd2_508m, pll3_pfd3_454m, @@ -156,16 +152,20 @@ enum mx6q_clks { ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3, usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg, pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg, - ssi2_ipg, ssi3_ipg, clk_max + ssi2_ipg, ssi3_ipg, rom, + clk_max }; static struct clk *clk[clk_max]; +static enum mx6q_clks const clks_init_on[] __initconst = { + mmdc_ch0_axi, rom, +}; + int __init mx6q_clocks_init(void) { struct device_node *np; void __iomem *base; - struct clk *c; int i, irq; clk[dummy] = imx_clk_fixed("dummy", 0); @@ -365,6 +365,7 @@ int __init mx6q_clocks_init(void) clk[gpmi_bch] = imx_clk_gate2("gpmi_bch", "usdhc4", base + 0x78, 26); clk[gpmi_io] = imx_clk_gate2("gpmi_io", "enfc", base + 0x78, 28); clk[gpmi_apb] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30); + clk[rom] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0); clk[sata] = imx_clk_gate2("sata", "ipg", base + 0x7c, 4); clk[sdma] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6); clk[spba] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12); @@ -424,21 +425,14 @@ int __init mx6q_clocks_init(void) clk_register_clkdev(clk[ahb], "ahb", NULL); clk_register_clkdev(clk[cko1], "cko1", NULL); - for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) { - c = clk_get_sys(clks_init_on[i], NULL); - if (IS_ERR(c)) { - pr_err("%s: failed to get clk %s", __func__, - clks_init_on[i]); - return PTR_ERR(c); - } - clk_prepare_enable(c); - } + for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) + clk_prepare_enable(clk[clks_init_on[i]]); np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt"); base = of_iomap(np, 0); WARN_ON(!base); irq = irq_of_parse_and_map(np, 0); - mxc_timer_init(NULL, base, irq); + mxc_timer_init(base, irq); return 0; } diff --git a/arch/arm/mach-imx/clk-pllv2.c b/arch/arm/mach-imx/clk-pllv2.c index 4685919..0440379 100644 --- a/arch/arm/mach-imx/clk-pllv2.c +++ b/arch/arm/mach-imx/clk-pllv2.c @@ -74,30 +74,15 @@ struct clk_pllv2 { void __iomem *base; }; -static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) +static unsigned long __clk_pllv2_recalc_rate(unsigned long parent_rate, + u32 dp_ctl, u32 dp_op, u32 dp_mfd, u32 dp_mfn) { long mfi, mfn, mfd, pdf, ref_clk, mfn_abs; - unsigned long dp_op, dp_mfd, dp_mfn, dp_ctl, pll_hfsm, dbl; - void __iomem *pllbase; + unsigned long dbl; s64 temp; - struct clk_pllv2 *pll = to_clk_pllv2(hw); - - pllbase = pll->base; - dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL); - pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM; dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN; - if (pll_hfsm == 0) { - dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP); - dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD); - dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN); - } else { - dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP); - dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD); - dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN); - } pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK; mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET; mfi = (mfi <= 5) ? 5 : mfi; @@ -123,18 +108,30 @@ static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw, return temp; } -static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate, +static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { + u32 dp_op, dp_mfd, dp_mfn, dp_ctl; + void __iomem *pllbase; struct clk_pllv2 *pll = to_clk_pllv2(hw); + + pllbase = pll->base; + + dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL); + dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP); + dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD); + dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN); + + return __clk_pllv2_recalc_rate(parent_rate, dp_ctl, dp_op, dp_mfd, dp_mfn); +} + +static int __clk_pllv2_set_rate(unsigned long rate, unsigned long parent_rate, + u32 *dp_op, u32 *dp_mfd, u32 *dp_mfn) +{ u32 reg; - void __iomem *pllbase; long mfi, pdf, mfn, mfd = 999999; s64 temp64; unsigned long quad_parent_rate; - unsigned long pll_hfsm, dp_ctl; - - pllbase = pll->base; quad_parent_rate = 4 * parent_rate; pdf = mfi = -1; @@ -144,25 +141,41 @@ static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate, return -EINVAL; pdf--; - temp64 = rate * (pdf+1) - quad_parent_rate * mfi; - do_div(temp64, quad_parent_rate/1000000); + temp64 = rate * (pdf + 1) - quad_parent_rate * mfi; + do_div(temp64, quad_parent_rate / 1000000); mfn = (long)temp64; + reg = mfi << 4 | pdf; + + *dp_op = reg; + *dp_mfd = mfd; + *dp_mfn = mfn; + + return 0; +} + +static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_pllv2 *pll = to_clk_pllv2(hw); + void __iomem *pllbase; + u32 dp_ctl, dp_op, dp_mfd, dp_mfn; + int ret; + + pllbase = pll->base; + + + ret = __clk_pllv2_set_rate(rate, parent_rate, &dp_op, &dp_mfd, &dp_mfn); + if (ret) + return ret; + dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL); /* use dpdck0_2 */ __raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL); - pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM; - if (pll_hfsm == 0) { - reg = mfi << 4 | pdf; - __raw_writel(reg, pllbase + MXC_PLL_DP_OP); - __raw_writel(mfd, pllbase + MXC_PLL_DP_MFD); - __raw_writel(mfn, pllbase + MXC_PLL_DP_MFN); - } else { - reg = mfi << 4 | pdf; - __raw_writel(reg, pllbase + MXC_PLL_DP_HFS_OP); - __raw_writel(mfd, pllbase + MXC_PLL_DP_HFS_MFD); - __raw_writel(mfn, pllbase + MXC_PLL_DP_HFS_MFN); - } + + __raw_writel(dp_op, pllbase + MXC_PLL_DP_OP); + __raw_writel(dp_mfd, pllbase + MXC_PLL_DP_MFD); + __raw_writel(dp_mfn, pllbase + MXC_PLL_DP_MFN); return 0; } @@ -170,7 +183,11 @@ static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate, static long clk_pllv2_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *prate) { - return rate; + u32 dp_op, dp_mfd, dp_mfn; + + __clk_pllv2_set_rate(rate, *prate, &dp_op, &dp_mfd, &dp_mfn); + return __clk_pllv2_recalc_rate(*prate, MXC_PLL_DP_CTL_DPDCK0_2_EN, + dp_op, dp_mfd, dp_mfn); } static int clk_pllv2_prepare(struct clk_hw *hw) diff --git a/arch/arm/mach-imx/crm-regs-imx5.h b/arch/arm/mach-imx/crm-regs-imx5.h index 5e11ba7..5e3f1f0 100644 --- a/arch/arm/mach-imx/crm-regs-imx5.h +++ b/arch/arm/mach-imx/crm-regs-imx5.h @@ -23,7 +23,7 @@ #define MX53_DPLL1_BASE MX53_IO_ADDRESS(MX53_PLL1_BASE_ADDR) #define MX53_DPLL2_BASE MX53_IO_ADDRESS(MX53_PLL2_BASE_ADDR) #define MX53_DPLL3_BASE MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR) -#define MX53_DPLL4_BASE MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR) +#define MX53_DPLL4_BASE MX53_IO_ADDRESS(MX53_PLL4_BASE_ADDR) /* PLL Register Offsets */ #define MXC_PLL_DP_CTL 0x00 diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index 89493ab..20ed2d5 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -12,6 +12,7 @@ #include <linux/errno.h> #include <asm/cacheflush.h> +#include <asm/cp15.h> #include <mach/common.h> int platform_cpu_kill(unsigned int cpu) @@ -19,6 +20,44 @@ int platform_cpu_kill(unsigned int cpu) return 1; } +static inline void cpu_enter_lowpower(void) +{ + unsigned int v; + + flush_cache_all(); + asm volatile( + "mcr p15, 0, %1, c7, c5, 0\n" + " mcr p15, 0, %1, c7, c10, 4\n" + /* + * Turn off coherency + */ + " mrc p15, 0, %0, c1, c0, 1\n" + " bic %0, %0, %3\n" + " mcr p15, 0, %0, c1, c0, 1\n" + " mrc p15, 0, %0, c1, c0, 0\n" + " bic %0, %0, %2\n" + " mcr p15, 0, %0, c1, c0, 0\n" + : "=&r" (v) + : "r" (0), "Ir" (CR_C), "Ir" (0x40) + : "cc"); +} + +static inline void cpu_leave_lowpower(void) +{ + unsigned int v; + + asm volatile( + "mrc p15, 0, %0, c1, c0, 0\n" + " orr %0, %0, %1\n" + " mcr p15, 0, %0, c1, c0, 0\n" + " mrc p15, 0, %0, c1, c0, 1\n" + " orr %0, %0, %2\n" + " mcr p15, 0, %0, c1, c0, 1\n" + : "=&r" (v) + : "Ir" (CR_C), "Ir" (0x40) + : "cc"); +} + /* * platform-specific code to shutdown a CPU * @@ -26,9 +65,10 @@ int platform_cpu_kill(unsigned int cpu) */ void platform_cpu_die(unsigned int cpu) { - flush_cache_all(); + cpu_enter_lowpower(); imx_enable_cpu(cpu, false); cpu_do_idle(); + cpu_leave_lowpower(); /* We should never return from idle */ panic("cpu %d unexpectedly exit from shutdown\n", cpu); diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index c515f8e..6450303 100644 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -70,7 +70,6 @@ static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = { I2C_BOARD_INFO("pcf8563", 0x51), }, { I2C_BOARD_INFO("tsc2007", 0x48), - .type = "tsc2007", .platform_data = &tsc2007_info, .irq = IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO), }, diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c index ac50f16..1e09de5 100644 --- a/arch/arm/mach-imx/mach-cpuimx51sd.c +++ b/arch/arm/mach-imx/mach-cpuimx51sd.c @@ -142,7 +142,6 @@ static struct i2c_board_info eukrea_cpuimx51sd_i2c_devices[] = { I2C_BOARD_INFO("pcf8563", 0x51), }, { I2C_BOARD_INFO("tsc2007", 0x49), - .type = "tsc2007", .platform_data = &tsc2007_info, }, }; diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index dff82eb..ba09552 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -38,7 +38,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> -#include <asm/system.h> +#include <asm/system_info.h> #include <mach/common.h> #include <mach/iomux-mx27.h> @@ -116,6 +116,8 @@ static const int visstrim_m10_pins[] __initconst = { PB23_PF_USB_PWR, PB24_PF_USB_OC, /* CSI */ + TVP5150_RSTN | GPIO_GPIO | GPIO_OUT, + TVP5150_PWDN | GPIO_GPIO | GPIO_OUT, PB10_PF_CSI_D0, PB11_PF_CSI_D1, PB12_PF_CSI_D2, @@ -147,6 +149,24 @@ static struct gpio visstrim_m10_version_gpios[] = { { MOTHERBOARD_BIT2, GPIOF_IN, "mother-version-2" }, }; +static const struct gpio visstrim_m10_gpios[] __initconst = { + { + .gpio = TVP5150_RSTN, + .flags = GPIOF_DIR_OUT | GPIOF_INIT_HIGH, + .label = "tvp5150_rstn", + }, + { + .gpio = TVP5150_PWDN, + .flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW, + .label = "tvp5150_pwdn", + }, + { + .gpio = OTG_PHY_CS_GPIO, + .flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW, + .label = "usbotg_cs", + }, +}; + /* Camera */ static int visstrim_camera_power(struct device *dev, int on) { @@ -190,13 +210,6 @@ static void __init visstrim_camera_init(void) struct platform_device *pdev; int dma; - /* Initialize tvp5150 gpios */ - mxc_gpio_mode(TVP5150_RSTN | GPIO_GPIO | GPIO_OUT); - mxc_gpio_mode(TVP5150_PWDN | GPIO_GPIO | GPIO_OUT); - gpio_set_value(TVP5150_RSTN, 1); - gpio_set_value(TVP5150_PWDN, 0); - ndelay(1); - gpio_set_value(TVP5150_PWDN, 1); ndelay(1); gpio_set_value(TVP5150_RSTN, 0); @@ -377,10 +390,6 @@ static struct i2c_board_info visstrim_m10_i2c_devices[] = { /* USB OTG */ static int otg_phy_init(struct platform_device *pdev) { - gpio_set_value(OTG_PHY_CS_GPIO, 0); - - mdelay(10); - return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED); } @@ -435,6 +444,11 @@ static void __init visstrim_m10_board_init(void) if (ret) pr_err("Failed to setup pins (%d)\n", ret); + ret = gpio_request_array(visstrim_m10_gpios, + ARRAY_SIZE(visstrim_m10_gpios)); + if (ret) + pr_err("Failed to request gpios (%d)\n", ret); + imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata); imx27_add_imx_uart0(&uart_pdata); diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index d14bbe9..3e7401f 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -32,7 +32,7 @@ * Memory-mapped I/O on MX21ADS base board */ #define MX21ADS_MMIO_BASE_ADDR 0xf5000000 -#define MX21ADS_MMIO_SIZE SZ_16M +#define MX21ADS_MMIO_SIZE 0xc00000 #define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \ (MX21ADS_MMIO_BASE_ADDR + (offset)) diff --git a/arch/arm/mach-imx/mm-imx3.c b/arch/arm/mach-imx/mm-imx3.c index 967ed5b..a8983b9 100644 --- a/arch/arm/mach-imx/mm-imx3.c +++ b/arch/arm/mach-imx/mm-imx3.c @@ -86,6 +86,7 @@ static void __iomem *imx3_ioremap_caller(unsigned long phys_addr, size_t size, void __init imx3_init_l2x0(void) { +#ifdef CONFIG_CACHE_L2X0 void __iomem *l2x0_base; void __iomem *clkctl_base; @@ -115,6 +116,7 @@ void __init imx3_init_l2x0(void) } l2x0_init(l2x0_base, 0x00030024, 0x00000000); +#endif } #ifdef CONFIG_SOC_IMX31 @@ -179,6 +181,8 @@ void __init imx31_soc_init(void) mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0); mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0); + pinctrl_provide_dummies(); + if (to_version == 1) { strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin", strlen(imx31_sdma_pdata.fw_name)); diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index feeee17..1d00305 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -202,6 +202,8 @@ void __init imx51_soc_init(void) mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_INT_GPIO3_LOW, MX51_INT_GPIO3_HIGH); mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_INT_GPIO4_LOW, MX51_INT_GPIO4_HIGH); + pinctrl_provide_dummies(); + /* i.mx51 has the i.mx35 type sdma */ imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata); diff --git a/arch/arm/mach-kirkwood/board-iconnect.c b/arch/arm/mach-kirkwood/board-iconnect.c index 2222c57..b0d3cc4 100644 --- a/arch/arm/mach-kirkwood/board-iconnect.c +++ b/arch/arm/mach-kirkwood/board-iconnect.c @@ -20,9 +20,6 @@ #include <linux/mv643xx_eth.h> #include <linux/gpio.h> #include <linux/leds.h> -#include <linux/spi/flash.h> -#include <linux/spi/spi.h> -#include <linux/spi/orion_spi.h> #include <linux/i2c.h> #include <linux/input.h> #include <linux/gpio_keys.h> diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 25fb3fd..f261cd2 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -159,6 +159,7 @@ static struct clk __init *clk_register_gate_fn(struct device *dev, gate_fn->gate.flags = clk_gate_flags; gate_fn->gate.lock = lock; gate_fn->gate.hw.init = &init; + gate_fn->fn = fn; /* ops is the gate ops, but with our disable function */ if (clk_gate_fn_ops.disable != clk_gate_fn_disable) { @@ -193,9 +194,11 @@ static struct clk __init *kirkwood_register_gate_fn(const char *name, bit_idx, 0, &gating_lock, fn); } +static struct clk *ge0, *ge1; + void __init kirkwood_clk_init(void) { - struct clk *runit, *ge0, *ge1, *sata0, *sata1, *usb0, *sdio; + struct clk *runit, *sata0, *sata1, *usb0, *sdio; struct clk *crypto, *xor0, *xor1, *pex0, *pex1, *audio; tclk = clk_register_fixed_rate(NULL, "tclk", NULL, @@ -257,6 +260,9 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data) orion_ge00_init(eth_data, GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM, IRQ_KIRKWOOD_GE00_ERR); + /* The interface forgets the MAC address assigned by u-boot if + the clock is turned off, so claim the clk now. */ + clk_prepare_enable(ge0); } @@ -268,6 +274,7 @@ void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data) orion_ge01_init(eth_data, GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM, IRQ_KIRKWOOD_GE01_ERR); + clk_prepare_enable(ge1); } diff --git a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h index 3eee37a..a115142 100644 --- a/arch/arm/mach-kirkwood/include/mach/bridge-regs.h +++ b/arch/arm/mach-kirkwood/include/mach/bridge-regs.h @@ -38,6 +38,7 @@ #define IRQ_MASK_HIGH_OFF 0x0014 #define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) +#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300) #define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128) #define L2_WRITETHROUGH 0x00000010 diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index fede3d5..c5b6851 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -80,6 +80,7 @@ #define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100) #define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000) +#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x20000) #define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x30000) diff --git a/arch/arm/mach-mmp/include/mach/gpio-pxa.h b/arch/arm/mach-mmp/include/mach/gpio-pxa.h deleted file mode 100644 index 0e135a5..0000000 --- a/arch/arm/mach-mmp/include/mach/gpio-pxa.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef __ASM_MACH_GPIO_PXA_H -#define __ASM_MACH_GPIO_PXA_H - -#include <mach/addr-map.h> -#include <mach/cputype.h> -#include <mach/irqs.h> - -#define GPIO_REGS_VIRT (APB_VIRT_BASE + 0x19000) - -#define BANK_OFF(n) (((n) < 3) ? (n) << 2 : 0x100 + (((n) - 3) << 2)) -#define GPIO_REG(x) (*(volatile u32 *)(GPIO_REGS_VIRT + (x))) - -#define gpio_to_bank(gpio) ((gpio) >> 5) - -/* NOTE: these macros are defined here to make optimization of - * gpio_{get,set}_value() to work when 'gpio' is a constant. - * Usage of these macros otherwise is no longer recommended, - * use generic GPIO API whenever possible. - */ -#define GPIO_bit(gpio) (1 << ((gpio) & 0x1f)) - -#define GPLR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x00) -#define GPDR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x0c) -#define GPSR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x18) -#define GPCR(x) GPIO_REG(BANK_OFF(gpio_to_bank(x)) + 0x24) - -#include <plat/gpio-pxa.h> - -#endif /* __ASM_MACH_GPIO_PXA_H */ diff --git a/arch/arm/mach-mmp/irq.c b/arch/arm/mach-mmp/irq.c index fcfe0e3..e60c7d9 100644 --- a/arch/arm/mach-mmp/irq.c +++ b/arch/arm/mach-mmp/irq.c @@ -241,6 +241,7 @@ void __init mmp2_init_icu(void) icu_data[1].clr_mfp_irq_base = IRQ_MMP2_PMIC_BASE; icu_data[1].clr_mfp_hwirq = IRQ_MMP2_PMIC - IRQ_MMP2_PMIC_BASE; icu_data[1].nr_irqs = 2; + icu_data[1].cascade_irq = 4; icu_data[1].virq_base = IRQ_MMP2_PMIC_BASE; icu_data[1].domain = irq_domain_add_legacy(NULL, icu_data[1].nr_irqs, icu_data[1].virq_base, 0, @@ -249,6 +250,7 @@ void __init mmp2_init_icu(void) icu_data[2].reg_status = mmp_icu_base + 0x154; icu_data[2].reg_mask = mmp_icu_base + 0x16c; icu_data[2].nr_irqs = 2; + icu_data[2].cascade_irq = 5; icu_data[2].virq_base = IRQ_MMP2_RTC_BASE; icu_data[2].domain = irq_domain_add_legacy(NULL, icu_data[2].nr_irqs, icu_data[2].virq_base, 0, @@ -257,6 +259,7 @@ void __init mmp2_init_icu(void) icu_data[3].reg_status = mmp_icu_base + 0x180; icu_data[3].reg_mask = mmp_icu_base + 0x17c; icu_data[3].nr_irqs = 3; + icu_data[3].cascade_irq = 9; icu_data[3].virq_base = IRQ_MMP2_KEYPAD_BASE; icu_data[3].domain = irq_domain_add_legacy(NULL, icu_data[3].nr_irqs, icu_data[3].virq_base, 0, @@ -265,6 +268,7 @@ void __init mmp2_init_icu(void) icu_data[4].reg_status = mmp_icu_base + 0x158; icu_data[4].reg_mask = mmp_icu_base + 0x170; icu_data[4].nr_irqs = 5; + icu_data[4].cascade_irq = 17; icu_data[4].virq_base = IRQ_MMP2_TWSI_BASE; icu_data[4].domain = irq_domain_add_legacy(NULL, icu_data[4].nr_irqs, icu_data[4].virq_base, 0, @@ -273,6 +277,7 @@ void __init mmp2_init_icu(void) icu_data[5].reg_status = mmp_icu_base + 0x15c; icu_data[5].reg_mask = mmp_icu_base + 0x174; icu_data[5].nr_irqs = 15; + icu_data[5].cascade_irq = 35; icu_data[5].virq_base = IRQ_MMP2_MISC_BASE; icu_data[5].domain = irq_domain_add_legacy(NULL, icu_data[5].nr_irqs, icu_data[5].virq_base, 0, @@ -281,6 +286,7 @@ void __init mmp2_init_icu(void) icu_data[6].reg_status = mmp_icu_base + 0x160; icu_data[6].reg_mask = mmp_icu_base + 0x178; icu_data[6].nr_irqs = 2; + icu_data[6].cascade_irq = 51; icu_data[6].virq_base = IRQ_MMP2_MIPI_HSI1_BASE; icu_data[6].domain = irq_domain_add_legacy(NULL, icu_data[6].nr_irqs, icu_data[6].virq_base, 0, @@ -289,6 +295,7 @@ void __init mmp2_init_icu(void) icu_data[7].reg_status = mmp_icu_base + 0x188; icu_data[7].reg_mask = mmp_icu_base + 0x184; icu_data[7].nr_irqs = 2; + icu_data[7].cascade_irq = 55; icu_data[7].virq_base = IRQ_MMP2_MIPI_HSI0_BASE; icu_data[7].domain = irq_domain_add_legacy(NULL, icu_data[7].nr_irqs, icu_data[7].virq_base, 0, diff --git a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h index c64dbb9..eb187e0 100644 --- a/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h +++ b/arch/arm/mach-mv78xx0/include/mach/bridge-regs.h @@ -31,5 +31,6 @@ #define IRQ_MASK_HIGH_OFF 0x0014 #define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) +#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300) #endif diff --git a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h index 3674497..e807c4c 100644 --- a/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h +++ b/arch/arm/mach-mv78xx0/include/mach/mv78xx0.h @@ -42,6 +42,7 @@ #define MV78XX0_CORE0_REGS_PHYS_BASE 0xf1020000 #define MV78XX0_CORE1_REGS_PHYS_BASE 0xf1024000 #define MV78XX0_CORE_REGS_VIRT_BASE 0xfe400000 +#define MV78XX0_CORE_REGS_PHYS_BASE 0xfe400000 #define MV78XX0_CORE_REGS_SIZE SZ_16K #define MV78XX0_PCIE_IO_PHYS_BASE(i) (0xf0800000 + ((i) << 20)) @@ -59,6 +60,7 @@ * Core-specific peripheral registers. */ #define BRIDGE_VIRT_BASE (MV78XX0_CORE_REGS_VIRT_BASE) +#define BRIDGE_PHYS_BASE (MV78XX0_CORE_REGS_PHYS_BASE) /* * Register Map diff --git a/arch/arm/mach-mxs/mach-apx4devkit.c b/arch/arm/mach-mxs/mach-apx4devkit.c index 5e90b9d..f5f0617 100644 --- a/arch/arm/mach-mxs/mach-apx4devkit.c +++ b/arch/arm/mach-mxs/mach-apx4devkit.c @@ -205,6 +205,16 @@ static int apx4devkit_phy_fixup(struct phy_device *phy) return 0; } +static void __init apx4devkit_fec_phy_clk_enable(void) +{ + struct clk *clk; + + /* Enable fec phy clock */ + clk = clk_get_sys("enet_out", NULL); + if (!IS_ERR(clk)) + clk_prepare_enable(clk); +} + static void __init apx4devkit_init(void) { mx28_soc_init(); @@ -225,6 +235,7 @@ static void __init apx4devkit_init(void) phy_register_fixup_for_uid(PHY_ID_KS8051, MICREL_PHY_ID_MASK, apx4devkit_phy_fixup); + apx4devkit_fec_phy_clk_enable(); mx28_add_fec(0, &mx28_fec_pdata); mx28_add_mxs_mmc(0, &apx4devkit_mmc_pdata); diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index 70a81f9..53c39d2 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -97,11 +97,6 @@ __init board_onenand_init(struct mtd_partition *onenand_parts, gpmc_onenand_init(&board_onenand_data); } -#else -void -__init board_onenand_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs) -{ -} #endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */ #if defined(CONFIG_MTD_NAND_OMAP2) || \ diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 8ca14e8..2c5d0ed 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -83,11 +83,9 @@ static struct musb_hdrc_config musb_config = { }; static struct musb_hdrc_platform_data tusb_data = { -#if defined(CONFIG_USB_MUSB_OTG) +#ifdef CONFIG_USB_GADGET_MUSB_HDRC .mode = MUSB_OTG, -#elif defined(CONFIG_USB_MUSB_PERIPHERAL) - .mode = MUSB_PERIPHERAL, -#else /* defined(CONFIG_USB_MUSB_HOST) */ +#else .mode = MUSB_HOST, #endif .set_power = tusb_set_power, diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 79c6909..580fd17 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -81,13 +81,13 @@ static u8 omap3_beagle_version; static struct { int mmc1_gpio_wp; int usb_pwr_level; - int reset_gpio; + int dvi_pd_gpio; int usr_button_gpio; int mmc_caps; } beagle_config = { .mmc1_gpio_wp = -EINVAL, .usb_pwr_level = GPIOF_OUT_INIT_LOW, - .reset_gpio = 129, + .dvi_pd_gpio = -EINVAL, .usr_button_gpio = 4, .mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, }; @@ -126,21 +126,21 @@ static void __init omap3_beagle_init_rev(void) printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX; beagle_config.mmc1_gpio_wp = 29; - beagle_config.reset_gpio = 170; + beagle_config.dvi_pd_gpio = 170; beagle_config.usr_button_gpio = 7; break; case 6: printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3; beagle_config.mmc1_gpio_wp = 23; - beagle_config.reset_gpio = 170; + beagle_config.dvi_pd_gpio = 170; beagle_config.usr_button_gpio = 7; break; case 5: printk(KERN_INFO "OMAP3 Beagle Rev: C4\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_C4; beagle_config.mmc1_gpio_wp = 23; - beagle_config.reset_gpio = 170; + beagle_config.dvi_pd_gpio = 170; beagle_config.usr_button_gpio = 7; break; case 0: @@ -274,11 +274,9 @@ static int beagle_twl_gpio_setup(struct device *dev, if (r) pr_err("%s: unable to configure nDVI_PWR_EN\n", __func__); - r = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH, - "DVI_LDO_EN"); - if (r) - pr_err("%s: unable to configure DVI_LDO_EN\n", - __func__); + + beagle_config.dvi_pd_gpio = gpio + 2; + } else { /* * REVISIT: need ehci-omap hooks for external VBUS @@ -287,7 +285,7 @@ static int beagle_twl_gpio_setup(struct device *dev, if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC")) pr_err("%s: unable to configure EHCI_nOC\n", __func__); } - dvi_panel.power_down_gpio = beagle_config.reset_gpio; + dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio; gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level, "nEN_USB_PWR"); @@ -499,7 +497,7 @@ static void __init omap3_beagle_init(void) omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3_beagle_init_rev(); - if (beagle_config.mmc1_gpio_wp != -EINVAL) + if (gpio_is_valid(beagle_config.mmc1_gpio_wp)) omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT); mmc[0].caps = beagle_config.mmc_caps; omap_hsmmc_init(mmc); @@ -510,15 +508,13 @@ static void __init omap3_beagle_init(void) platform_add_devices(omap3_beagle_devices, ARRAY_SIZE(omap3_beagle_devices)); + if (gpio_is_valid(beagle_config.dvi_pd_gpio)) + omap_mux_init_gpio(beagle_config.dvi_pd_gpio, OMAP_PIN_OUTPUT); omap_display_init(&beagle_dss_data); omap_serial_init(); omap_sdrc_init(mt46h32m32lf6_sdrc_params, mt46h32m32lf6_sdrc_params); - omap_mux_init_gpio(170, OMAP_PIN_INPUT); - /* REVISIT leave DVI powered down until it's needed ... */ - gpio_request_one(170, GPIOF_OUT_INIT_HIGH, "DVI_nPD"); - usb_musb_init(NULL); usbhs_init(&usbhs_bdata); omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions, diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 8fa2fc3..779734d 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -494,8 +494,8 @@ static void __init overo_init(void) regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - omap_hsmmc_init(mmc); overo_i2c_init(); + omap_hsmmc_init(mmc); omap_display_init(&overo_dss_data); omap_serial_init(); omap_sdrc_init(mt46h32m32lf6_sdrc_params, diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index ff53dec..df2534d 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -144,7 +144,6 @@ static struct lis3lv02d_platform_data rx51_lis3lv02d_data = { .release_resources = lis302_release, .st_min_limits = {-32, 3, 3}, .st_max_limits = {-3, 32, 32}, - .irq2 = OMAP_GPIO_IRQ(LIS302_IRQ2_GPIO), }; #endif @@ -1030,7 +1029,6 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_3[] = { { I2C_BOARD_INFO("lis3lv02d", 0x1d), .platform_data = &rx51_lis3lv02d_data, - .irq = OMAP_GPIO_IRQ(LIS302_IRQ1_GPIO), }, #endif }; @@ -1056,6 +1054,10 @@ static int __init rx51_i2c_init(void) omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata); omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2, ARRAY_SIZE(rx51_peripherals_i2c_board_info_2)); +#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE) + rx51_lis3lv02d_data.irq2 = gpio_to_irq(LIS302_IRQ2_GPIO); + rx51_peripherals_i2c_board_info_3[0].irq = gpio_to_irq(LIS302_IRQ1_GPIO); +#endif omap_register_i2c_bus(3, 400, rx51_peripherals_i2c_board_info_3, ARRAY_SIZE(rx51_peripherals_i2c_board_info_3)); return 0; diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 4e1a3b0..1efdec2 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3514,7 +3514,7 @@ int __init omap3xxx_clk_init(void) struct omap_clk *c; u32 cpu_clkflg = 0; - if (cpu_is_omap3517()) { + if (soc_is_am35xx()) { cpu_mask = RATE_IN_34XX; cpu_clkflg = CK_AM35XX; } else if (cpu_is_omap3630()) { diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 2172f66..ba6f9a0 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -84,6 +84,7 @@ static struct clk slimbus_clk = { static struct clk sys_32k_ck = { .name = "sys_32k_ck", + .clkdm_name = "prm_clkdm", .rate = 32768, .ops = &clkops_null, }; @@ -512,6 +513,7 @@ static struct clk ddrphy_ck = { .name = "ddrphy_ck", .parent = &dpll_core_m2_ck, .ops = &clkops_null, + .clkdm_name = "l3_emif_clkdm", .fixed_div = 2, .recalc = &omap_fixed_divisor_recalc, }; @@ -769,6 +771,7 @@ static const struct clksel dpll_mpu_m2_div[] = { static struct clk dpll_mpu_m2_ck = { .name = "dpll_mpu_m2_ck", .parent = &dpll_mpu_ck, + .clkdm_name = "cm_clkdm", .clksel = dpll_mpu_m2_div, .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_MPU, .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, @@ -1149,6 +1152,7 @@ static const struct clksel l3_div_div[] = { static struct clk l3_div_ck = { .name = "l3_div_ck", .parent = &div_core_ck, + .clkdm_name = "cm_clkdm", .clksel = l3_div_div, .clksel_reg = OMAP4430_CM_CLKSEL_CORE, .clksel_mask = OMAP4430_CLKSEL_L3_MASK, @@ -2824,6 +2828,7 @@ static const struct clksel trace_clk_div_div[] = { static struct clk trace_clk_div_ck = { .name = "trace_clk_div_ck", .parent = &pmd_trace_clk_mux_ck, + .clkdm_name = "emu_sys_clkdm", .clksel = trace_clk_div_div, .clksel_reg = OMAP4430_CM_EMU_DEBUGSS_CLKCTRL, .clksel_mask = OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK, @@ -3412,9 +3417,12 @@ int __init omap4xxx_clk_init(void) if (cpu_is_omap443x()) { cpu_mask = RATE_IN_4430; cpu_clkflg = CK_443X; - } else if (cpu_is_omap446x()) { + } else if (cpu_is_omap446x() || cpu_is_omap447x()) { cpu_mask = RATE_IN_4460 | RATE_IN_4430; cpu_clkflg = CK_446X | CK_443X; + + if (cpu_is_omap447x()) + pr_warn("WARNING: OMAP4470 clock data incomplete!\n"); } else { return 0; } diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index f7b58609..6227e95 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -31,12 +31,16 @@ * * CLKDM_NO_AUTODEPS: Prevent "autodeps" from being added/removed from this * clockdomain. (Currently, this applies to OMAP3 clockdomains only.) + * CLKDM_ACTIVE_WITH_MPU: The PRCM guarantees that this clockdomain is + * active whenever the MPU is active. True for interconnects and + * the WKUP clockdomains. */ #define CLKDM_CAN_FORCE_SLEEP (1 << 0) #define CLKDM_CAN_FORCE_WAKEUP (1 << 1) #define CLKDM_CAN_ENABLE_AUTO (1 << 2) #define CLKDM_CAN_DISABLE_AUTO (1 << 3) #define CLKDM_NO_AUTODEPS (1 << 4) +#define CLKDM_ACTIVE_WITH_MPU (1 << 5) #define CLKDM_CAN_HWSUP (CLKDM_CAN_ENABLE_AUTO | CLKDM_CAN_DISABLE_AUTO) #define CLKDM_CAN_SWSUP (CLKDM_CAN_FORCE_SLEEP | CLKDM_CAN_FORCE_WAKEUP) diff --git a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c index 839145e1..4972219 100644 --- a/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c +++ b/arch/arm/mach-omap2/clockdomains2xxx_3xxx_data.c @@ -88,4 +88,5 @@ struct clockdomain wkup_common_clkdm = { .name = "wkup_clkdm", .pwrdm = { .name = "wkup_pwrdm" }, .dep_bit = OMAP_EN_WKUP_SHIFT, + .flags = CLKDM_ACTIVE_WITH_MPU, }; diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c index c534258..7f2133a 100644 --- a/arch/arm/mach-omap2/clockdomains44xx_data.c +++ b/arch/arm/mach-omap2/clockdomains44xx_data.c @@ -381,7 +381,7 @@ static struct clockdomain l4_wkup_44xx_clkdm = { .cm_inst = OMAP4430_PRM_WKUP_CM_INST, .clkdm_offs = OMAP4430_PRM_WKUP_CM_WKUP_CDOFFS, .dep_bit = OMAP4430_L4WKUP_STATDEP_SHIFT, - .flags = CLKDM_CAN_HWSUP, + .flags = CLKDM_CAN_HWSUP | CLKDM_ACTIVE_WITH_MPU, }; static struct clockdomain emu_sys_44xx_clkdm = { diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h index a7bc096..f24e3f7 100644 --- a/arch/arm/mach-omap2/cm.h +++ b/arch/arm/mach-omap2/cm.h @@ -22,4 +22,15 @@ */ #define MAX_MODULE_READY_TIME 2000 +/* + * MAX_MODULE_DISABLE_TIME: max duration in microseconds to wait for + * the PRCM to request that a module enter the inactive state in the + * case of OMAP2 & 3. In the case of OMAP4 this is the max duration + * in microseconds for the module to reach the inactive state from + * a functional state. + * XXX FSUSB on OMAP4430 takes ~4ms to idle after reset during + * kernel init. + */ +#define MAX_MODULE_DISABLE_TIME 5000 + #endif diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c index 8c86d29..1a39945 100644 --- a/arch/arm/mach-omap2/cminst44xx.c +++ b/arch/arm/mach-omap2/cminst44xx.c @@ -313,9 +313,9 @@ int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_off omap_test_timeout((_clkctrl_idlest(part, inst, cdoffs, clkctrl_offs) == CLKCTRL_IDLEST_DISABLED), - MAX_MODULE_READY_TIME, i); + MAX_MODULE_DISABLE_TIME, i); - return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY; + return (i < MAX_MODULE_DISABLE_TIME) ? 0 : -EBUSY; } /** diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 54d49dd..5fb47a1 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -271,9 +271,9 @@ static struct platform_device *create_simple_dss_pdev(const char *pdev_name, goto err; } - r = omap_device_register(pdev); + r = platform_device_add(pdev); if (r) { - pr_err("Could not register omap_device for %s\n", pdev_name); + pr_err("Could not register platform_device for %s\n", pdev_name); goto err; } diff --git a/arch/arm/mach-omap2/dsp.c b/arch/arm/mach-omap2/dsp.c index 845309f..88ffa1e 100644 --- a/arch/arm/mach-omap2/dsp.c +++ b/arch/arm/mach-omap2/dsp.c @@ -20,6 +20,9 @@ #include <linux/module.h> #include <linux/platform_device.h> + +#include <asm/memblock.h> + #include "cm2xxx_3xxx.h" #include "prm2xxx_3xxx.h" #ifdef CONFIG_BRIDGE_DVFS diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 0389b32..00486a8 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -247,6 +247,17 @@ void __init omap3xxx_check_features(void) omap_features |= OMAP3_HAS_SDRC; /* + * am35x fixups: + * - The am35x Chip ID register has bits 12, 7:5, and 3:2 marked as + * reserved and therefore return 0 when read. Unfortunately, + * OMAP3_CHECK_FEATURE() will interpret some of those zeroes to + * mean that a feature is present even though it isn't so clear + * the incorrectly set feature bits. + */ + if (soc_is_am35xx()) + omap_features &= ~(OMAP3_HAS_IVA | OMAP3_HAS_ISP); + + /* * TODO: Get additional info (where applicable) * e.g. Size of L2 cache. */ diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index fdc4303..6038a8c 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -149,6 +149,7 @@ omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num) ct->chip.irq_ack = omap_mask_ack_irq; ct->chip.irq_mask = irq_gc_mask_disable_reg; ct->chip.irq_unmask = irq_gc_unmask_enable_reg; + ct->chip.flags |= IRQCHIP_SKIP_SET_WAKE; ct->regs.enable = INTC_MIR_CLEAR0; ct->regs.disable = INTC_MIR_SET0; diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 80e55c5..9fe6829 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -41,6 +41,7 @@ #include "control.h" #include "mux.h" #include "prm.h" +#include "common.h" #define OMAP_MUX_BASE_OFFSET 0x30 /* Offset from CTRL_BASE */ #define OMAP_MUX_BASE_SZ 0x5ca @@ -217,8 +218,7 @@ static int __init _omap_mux_get_by_name(struct omap_mux_partition *partition, return -ENODEV; } -static int __init -omap_mux_get_by_name(const char *muxname, +int __init omap_mux_get_by_name(const char *muxname, struct omap_mux_partition **found_partition, struct omap_mux **found_mux) { diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h index 69fe060..471e62a7 100644 --- a/arch/arm/mach-omap2/mux.h +++ b/arch/arm/mach-omap2/mux.h @@ -59,6 +59,7 @@ #define OMAP_PIN_OFF_WAKEUPENABLE OMAP_WAKEUP_EN #define OMAP_MODE_GPIO(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4) +#define OMAP_MODE_UART(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE0) /* Flags for omapX_mux_init */ #define OMAP_PACKAGE_MASK 0xffff @@ -225,8 +226,18 @@ omap_hwmod_mux_init(struct omap_device_pad *bpads, int nr_pads); */ void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state); +int omap_mux_get_by_name(const char *muxname, + struct omap_mux_partition **found_partition, + struct omap_mux **found_mux); #else +static inline int omap_mux_get_by_name(const char *muxname, + struct omap_mux_partition **found_partition, + struct omap_mux **found_mux) +{ + return 0; +} + static inline int omap_mux_init_gpio(int gpio, int val) { return 0; diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index bf86f7e..2d710f5 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -530,7 +530,7 @@ static int _disable_wakeup(struct omap_hwmod *oh, u32 *v) if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) _set_slave_idlemode(oh, HWMOD_IDLEMODE_SMART, v); if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP) - _set_master_standbymode(oh, HWMOD_IDLEMODE_SMART_WKUP, v); + _set_master_standbymode(oh, HWMOD_IDLEMODE_SMART, v); /* XXX test pwrdm_get_wken for this hwmod's subsystem */ @@ -1124,15 +1124,18 @@ static struct omap_hwmod_addr_space * __init _find_mpu_rt_addr_space(struct omap * _enable_sysc - try to bring a module out of idle via OCP_SYSCONFIG * @oh: struct omap_hwmod * * - * If module is marked as SWSUP_SIDLE, force the module out of slave - * idle; otherwise, configure it for smart-idle. If module is marked - * as SWSUP_MSUSPEND, force the module out of master standby; - * otherwise, configure it for smart-standby. No return value. + * Ensure that the OCP_SYSCONFIG register for the IP block represented + * by @oh is set to indicate to the PRCM that the IP block is active. + * Usually this means placing the module into smart-idle mode and + * smart-standby, but if there is a bug in the automatic idle handling + * for the IP block, it may need to be placed into the force-idle or + * no-idle variants of these modes. No return value. */ static void _enable_sysc(struct omap_hwmod *oh) { u8 idlemode, sf; u32 v; + bool clkdm_act; if (!oh->class->sysc) return; @@ -1141,8 +1144,16 @@ static void _enable_sysc(struct omap_hwmod *oh) sf = oh->class->sysc->sysc_flags; if (sf & SYSC_HAS_SIDLEMODE) { - idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ? - HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART; + clkdm_act = ((oh->clkdm && + oh->clkdm->flags & CLKDM_ACTIVE_WITH_MPU) || + (oh->_clk && oh->_clk->clkdm && + oh->_clk->clkdm->flags & CLKDM_ACTIVE_WITH_MPU)); + if (clkdm_act && !(oh->class->sysc->idlemodes & + (SIDLE_SMART | SIDLE_SMART_WKUP))) + idlemode = HWMOD_IDLEMODE_FORCE; + else + idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ? + HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART; _set_slave_idlemode(oh, idlemode, &v); } @@ -1208,8 +1219,13 @@ static void _idle_sysc(struct omap_hwmod *oh) sf = oh->class->sysc->sysc_flags; if (sf & SYSC_HAS_SIDLEMODE) { - idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ? - HWMOD_IDLEMODE_FORCE : HWMOD_IDLEMODE_SMART; + /* XXX What about HWMOD_IDLEMODE_SMART_WKUP? */ + if (oh->flags & HWMOD_SWSUP_SIDLE || + !(oh->class->sysc->idlemodes & + (SIDLE_SMART | SIDLE_SMART_WKUP))) + idlemode = HWMOD_IDLEMODE_FORCE; + else + idlemode = HWMOD_IDLEMODE_SMART; _set_slave_idlemode(oh, idlemode, &v); } diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 950454a..b7bcba5 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -393,8 +393,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_counter_sysc = { .rev_offs = 0x0000, .sysc_offs = 0x0004, .sysc_flags = SYSC_HAS_SIDLEMODE, - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - SIDLE_SMART_WKUP), + .idlemodes = (SIDLE_FORCE | SIDLE_NO), .sysc_fields = &omap_hwmod_sysc_type1, }; @@ -854,6 +853,11 @@ static struct omap_hwmod omap44xx_dss_hdmi_hwmod = { .name = "dss_hdmi", .class = &omap44xx_hdmi_hwmod_class, .clkdm_name = "l3_dss_clkdm", + /* + * HDMI audio requires to use no-idle mode. Hence, + * set idle mode by software. + */ + .flags = HWMOD_SWSUP_SIDLE, .mpu_irqs = omap44xx_dss_hdmi_irqs, .sdma_reqs = omap44xx_dss_hdmi_sdma_reqs, .main_clk = "dss_48mhz_clk", @@ -1924,7 +1928,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp1_sdma_reqs[] = { static struct omap_hwmod_opt_clk mcbsp1_opt_clks[] = { { .role = "pad_fck", .clk = "pad_clks_ck" }, - { .role = "prcm_clk", .clk = "mcbsp1_sync_mux_ck" }, + { .role = "prcm_fck", .clk = "mcbsp1_sync_mux_ck" }, }; static struct omap_hwmod omap44xx_mcbsp1_hwmod = { @@ -1959,7 +1963,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp2_sdma_reqs[] = { static struct omap_hwmod_opt_clk mcbsp2_opt_clks[] = { { .role = "pad_fck", .clk = "pad_clks_ck" }, - { .role = "prcm_clk", .clk = "mcbsp2_sync_mux_ck" }, + { .role = "prcm_fck", .clk = "mcbsp2_sync_mux_ck" }, }; static struct omap_hwmod omap44xx_mcbsp2_hwmod = { @@ -1994,7 +1998,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp3_sdma_reqs[] = { static struct omap_hwmod_opt_clk mcbsp3_opt_clks[] = { { .role = "pad_fck", .clk = "pad_clks_ck" }, - { .role = "prcm_clk", .clk = "mcbsp3_sync_mux_ck" }, + { .role = "prcm_fck", .clk = "mcbsp3_sync_mux_ck" }, }; static struct omap_hwmod omap44xx_mcbsp3_hwmod = { @@ -2029,7 +2033,7 @@ static struct omap_hwmod_dma_info omap44xx_mcbsp4_sdma_reqs[] = { static struct omap_hwmod_opt_clk mcbsp4_opt_clks[] = { { .role = "pad_fck", .clk = "pad_clks_ck" }, - { .role = "prcm_clk", .clk = "mcbsp4_sync_mux_ck" }, + { .role = "prcm_fck", .clk = "mcbsp4_sync_mux_ck" }, }; static struct omap_hwmod omap44xx_mcbsp4_hwmod = { @@ -3860,7 +3864,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_2 = { }; /* usb_host_fs -> l3_main_2 */ -static struct omap_hwmod_ocp_if omap44xx_usb_host_fs__l3_main_2 = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_usb_host_fs__l3_main_2 = { .master = &omap44xx_usb_host_fs_hwmod, .slave = &omap44xx_l3_main_2_hwmod, .clk = "l3_div_ck", @@ -3918,7 +3922,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l3_main_3 = { }; /* aess -> l4_abe */ -static struct omap_hwmod_ocp_if omap44xx_aess__l4_abe = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_aess__l4_abe = { .master = &omap44xx_aess_hwmod, .slave = &omap44xx_l4_abe_hwmod, .clk = "ocp_abe_iclk", @@ -4009,7 +4013,7 @@ static struct omap_hwmod_addr_space omap44xx_aess_addrs[] = { }; /* l4_abe -> aess */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_abe__aess = { .master = &omap44xx_l4_abe_hwmod, .slave = &omap44xx_aess_hwmod, .clk = "ocp_abe_iclk", @@ -4027,7 +4031,7 @@ static struct omap_hwmod_addr_space omap44xx_aess_dma_addrs[] = { }; /* l4_abe -> aess (dma) */ -static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess_dma = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_abe__aess_dma = { .master = &omap44xx_l4_abe_hwmod, .slave = &omap44xx_aess_hwmod, .clk = "ocp_abe_iclk", @@ -5853,7 +5857,7 @@ static struct omap_hwmod_addr_space omap44xx_usb_host_fs_addrs[] = { }; /* l4_cfg -> usb_host_fs */ -static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_host_fs = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l4_cfg__usb_host_fs = { .master = &omap44xx_l4_cfg_hwmod, .slave = &omap44xx_usb_host_fs_hwmod, .clk = "l4_div_ck", @@ -6010,13 +6014,13 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_iva__l3_main_2, &omap44xx_l3_main_1__l3_main_2, &omap44xx_l4_cfg__l3_main_2, - &omap44xx_usb_host_fs__l3_main_2, + /* &omap44xx_usb_host_fs__l3_main_2, */ &omap44xx_usb_host_hs__l3_main_2, &omap44xx_usb_otg_hs__l3_main_2, &omap44xx_l3_main_1__l3_main_3, &omap44xx_l3_main_2__l3_main_3, &omap44xx_l4_cfg__l3_main_3, - &omap44xx_aess__l4_abe, + /* &omap44xx_aess__l4_abe, */ &omap44xx_dsp__l4_abe, &omap44xx_l3_main_1__l4_abe, &omap44xx_mpu__l4_abe, @@ -6025,8 +6029,8 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_cfg__l4_wkup, &omap44xx_mpu__mpu_private, &omap44xx_l4_cfg__ocp_wp_noc, - &omap44xx_l4_abe__aess, - &omap44xx_l4_abe__aess_dma, + /* &omap44xx_l4_abe__aess, */ + /* &omap44xx_l4_abe__aess_dma, */ &omap44xx_l3_main_2__c2c, &omap44xx_l4_wkup__counter_32k, &omap44xx_l4_cfg__ctrl_module_core, @@ -6132,7 +6136,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_per__uart2, &omap44xx_l4_per__uart3, &omap44xx_l4_per__uart4, - &omap44xx_l4_cfg__usb_host_fs, + /* &omap44xx_l4_cfg__usb_host_fs, */ &omap44xx_l4_cfg__usb_host_hs, &omap44xx_l4_cfg__usb_otg_hs, &omap44xx_l4_cfg__usb_tll_hs, diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/arch/arm/mach-omap2/omap_l3_smx.c index a05a62f..acc2164 100644 --- a/arch/arm/mach-omap2/omap_l3_smx.c +++ b/arch/arm/mach-omap2/omap_l3_smx.c @@ -155,10 +155,11 @@ static irqreturn_t omap3_l3_block_irq(struct omap3_l3 *l3, u8 multi = error & L3_ERROR_LOG_MULTI; u32 address = omap3_l3_decode_addr(error_addr); - WARN(true, "%s seen by %s %s at address %x\n", + pr_err("%s seen by %s %s at address %x\n", omap3_l3_code_string(code), omap3_l3_initiator_string(initid), multi ? "Multiple Errors" : "", address); + WARN_ON(1); return IRQ_HANDLED; } diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index 4c90477..d52651a 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -239,21 +239,15 @@ void am35x_set_mode(u8 musb_mode) devconf2 &= ~CONF2_OTGMODE; switch (musb_mode) { -#ifdef CONFIG_USB_MUSB_HDRC_HCD case MUSB_HOST: /* Force VBUS valid, ID = 0 */ devconf2 |= CONF2_FORCE_HOST; break; -#endif -#ifdef CONFIG_USB_GADGET_MUSB_HDRC case MUSB_PERIPHERAL: /* Force VBUS valid, ID = 1 */ devconf2 |= CONF2_FORCE_DEVICE; break; -#endif -#ifdef CONFIG_USB_MUSB_OTG case MUSB_OTG: /* Don't override the VBUS/ID comparators */ devconf2 |= CONF2_NO_OVERRIDE; break; -#endif default: pr_info(KERN_INFO "Unsupported mode %u\n", musb_mode); } diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index a34023d..3a595e8 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -724,6 +724,7 @@ int __init omap3_pm_init(void) ret = request_irq(omap_prcm_event_to_irq("io"), _prcm_int_handle_io, IRQF_SHARED | IRQF_NO_SUSPEND, "pm_io", omap3_pm_init); + enable_irq(omap_prcm_event_to_irq("io")); if (ret) { pr_err("pm: Failed to request pm_io irq\n"); diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index 9ce7654..21cb740 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -15,6 +15,7 @@ #include <linux/errno.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/irq.h> #include "common.h" #include <plat/cpu.h> @@ -303,8 +304,15 @@ void omap3xxx_prm_restore_irqen(u32 *saved_mask) static int __init omap3xxx_prcm_init(void) { - if (cpu_is_omap34xx()) - return omap_prcm_register_chain_handler(&omap3_prcm_irq_setup); - return 0; + int ret = 0; + + if (cpu_is_omap34xx()) { + ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup); + if (!ret) + irq_set_status_flags(omap_prcm_event_to_irq("io"), + IRQ_NOAUTOEN); + } + + return ret; } subsys_initcall(omap3xxx_prcm_init); diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 292d4aa..c1b93c7 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -57,6 +57,7 @@ struct omap_uart_state { struct list_head node; struct omap_hwmod *oh; + struct omap_device_pad default_omap_uart_pads[2]; }; static LIST_HEAD(uart_list); @@ -126,11 +127,70 @@ static void omap_uart_set_smartidle(struct platform_device *pdev) {} #endif /* CONFIG_PM */ #ifdef CONFIG_OMAP_MUX -static void omap_serial_fill_default_pads(struct omap_board_data *bdata) + +#define OMAP_UART_DEFAULT_PAD_NAME_LEN 28 +static char rx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN], + tx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN] __initdata; + +static void __init +omap_serial_fill_uart_tx_rx_pads(struct omap_board_data *bdata, + struct omap_uart_state *uart) +{ + uart->default_omap_uart_pads[0].name = rx_pad_name; + uart->default_omap_uart_pads[0].flags = OMAP_DEVICE_PAD_REMUX | + OMAP_DEVICE_PAD_WAKEUP; + uart->default_omap_uart_pads[0].enable = OMAP_PIN_INPUT | + OMAP_MUX_MODE0; + uart->default_omap_uart_pads[0].idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0; + uart->default_omap_uart_pads[1].name = tx_pad_name; + uart->default_omap_uart_pads[1].enable = OMAP_PIN_OUTPUT | + OMAP_MUX_MODE0; + bdata->pads = uart->default_omap_uart_pads; + bdata->pads_cnt = ARRAY_SIZE(uart->default_omap_uart_pads); +} + +static void __init omap_serial_check_wakeup(struct omap_board_data *bdata, + struct omap_uart_state *uart) { + struct omap_mux_partition *tx_partition = NULL, *rx_partition = NULL; + struct omap_mux *rx_mux = NULL, *tx_mux = NULL; + char *rx_fmt, *tx_fmt; + int uart_nr = bdata->id + 1; + + if (bdata->id != 2) { + rx_fmt = "uart%d_rx.uart%d_rx"; + tx_fmt = "uart%d_tx.uart%d_tx"; + } else { + rx_fmt = "uart%d_rx_irrx.uart%d_rx_irrx"; + tx_fmt = "uart%d_tx_irtx.uart%d_tx_irtx"; + } + + snprintf(rx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, rx_fmt, + uart_nr, uart_nr); + snprintf(tx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, tx_fmt, + uart_nr, uart_nr); + + if (omap_mux_get_by_name(rx_pad_name, &rx_partition, &rx_mux) >= 0 && + omap_mux_get_by_name + (tx_pad_name, &tx_partition, &tx_mux) >= 0) { + u16 tx_mode, rx_mode; + + tx_mode = omap_mux_read(tx_partition, tx_mux->reg_offset); + rx_mode = omap_mux_read(rx_partition, rx_mux->reg_offset); + + /* + * Check if uart is used in default tx/rx mode i.e. in mux mode0 + * if yes then configure rx pin for wake up capability + */ + if (OMAP_MODE_UART(rx_mode) && OMAP_MODE_UART(tx_mode)) + omap_serial_fill_uart_tx_rx_pads(bdata, uart); + } } #else -static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {} +static void __init omap_serial_check_wakeup(struct omap_board_data *bdata, + struct omap_uart_state *uart) +{ +} #endif static char *cmdline_find_option(char *str) @@ -287,8 +347,7 @@ void __init omap_serial_board_init(struct omap_uart_port_info *info) bdata.pads = NULL; bdata.pads_cnt = 0; - if (cpu_is_omap44xx() || cpu_is_omap34xx()) - omap_serial_fill_default_pads(&bdata); + omap_serial_check_wakeup(&bdata, uart); if (!info) omap_serial_init_port(&bdata, NULL); diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 119d5a9..43a9790 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -32,6 +32,7 @@ #include "twl-common.h" #include "pm.h" #include "voltage.h" +#include "mux.h" static struct i2c_board_info __initdata pmic_i2c_board_info = { .addr = 0x48, @@ -77,6 +78,7 @@ void __init omap4_pmic_init(const char *pmic_type, struct twl6040_platform_data *twl6040_data, int twl6040_irq) { /* PMIC part*/ + omap_mux_init_signal("sys_nirq1", OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE); strncpy(omap4_i2c1_board_info[0].type, pmic_type, sizeof(omap4_i2c1_board_info[0].type)); omap4_i2c1_board_info[0].irq = OMAP44XX_IRQ_SYS_1N; diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index b19d1b4..c4a5768 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -41,12 +41,10 @@ static struct musb_hdrc_config musb_config = { }; static struct musb_hdrc_platform_data musb_plat = { -#ifdef CONFIG_USB_MUSB_OTG +#ifdef CONFIG_USB_GADGET_MUSB_HDRC .mode = MUSB_OTG, -#elif defined(CONFIG_USB_MUSB_HDRC_HCD) +#else .mode = MUSB_HOST, -#elif defined(CONFIG_USB_GADGET_MUSB_HDRC) - .mode = MUSB_PERIPHERAL, #endif /* .clock is set dynamically */ .config = &musb_config, diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index db84a46..805bea6 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -300,7 +300,7 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data, printk(error, 3, status); return status; } - tusb_resources[2].start = irq + IH_GPIO_BASE; + tusb_resources[2].start = gpio_to_irq(irq); /* set up memory timings ... can speed them up later */ if (!ps_refclk) { diff --git a/arch/arm/mach-orion5x/include/mach/bridge-regs.h b/arch/arm/mach-orion5x/include/mach/bridge-regs.h index 96484bc..11a3c1e 100644 --- a/arch/arm/mach-orion5x/include/mach/bridge-regs.h +++ b/arch/arm/mach-orion5x/include/mach/bridge-regs.h @@ -35,5 +35,5 @@ #define MAIN_IRQ_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x204) #define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300) - +#define TIMER_PHYS_BASE (ORION5X_BRIDGE_PHYS_BASE | 0x300) #endif diff --git a/arch/arm/mach-orion5x/include/mach/io.h b/arch/arm/mach-orion5x/include/mach/io.h new file mode 100644 index 0000000..1aa5d0a --- /dev/null +++ b/arch/arm/mach-orion5x/include/mach/io.h @@ -0,0 +1,22 @@ +/* + * arch/arm/mach-orion5x/include/mach/io.h + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __ASM_ARCH_IO_H +#define __ASM_ARCH_IO_H + +#include <mach/orion5x.h> +#include <asm/sizes.h> + +#define IO_SPACE_LIMIT SZ_2M +static inline void __iomem *__io(unsigned long addr) +{ + return (void __iomem *)(addr + ORION5X_PCIE_IO_VIRT_BASE); +} + +#define __io(a) __io(a) +#endif diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h index 2745f5d..683e085 100644 --- a/arch/arm/mach-orion5x/include/mach/orion5x.h +++ b/arch/arm/mach-orion5x/include/mach/orion5x.h @@ -82,6 +82,7 @@ #define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2100) #define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x20000) +#define ORION5X_BRIDGE_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x20000) #define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x30000) diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index d09da6a..d3de84b 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -127,7 +127,11 @@ static unsigned long hx4700_pin_config[] __initdata = { GPIO19_SSP2_SCLK, GPIO86_SSP2_RXD, GPIO87_SSP2_TXD, - GPIO88_GPIO, + GPIO88_GPIO | MFP_LPM_DRIVE_HIGH, /* TSC2046_CS */ + + /* BQ24022 Regulator */ + GPIO72_GPIO | MFP_LPM_KEEP_OUTPUT, /* BQ24022_nCHARGE_EN */ + GPIO96_GPIO | MFP_LPM_KEEP_OUTPUT, /* BQ24022_ISET2 */ /* HX4700 specific input GPIOs */ GPIO12_GPIO | WAKEUP_ON_EDGE_RISE, /* ASIC3_IRQ */ @@ -135,6 +139,10 @@ static unsigned long hx4700_pin_config[] __initdata = { GPIO14_GPIO, /* nWLAN_IRQ */ /* HX4700 specific output GPIOs */ + GPIO61_GPIO | MFP_LPM_DRIVE_HIGH, /* W3220_nRESET */ + GPIO71_GPIO | MFP_LPM_DRIVE_HIGH, /* ASIC3_nRESET */ + GPIO81_GPIO | MFP_LPM_DRIVE_HIGH, /* CPU_GP_nRESET */ + GPIO116_GPIO | MFP_LPM_DRIVE_HIGH, /* CPU_HW_nRESET */ GPIO102_GPIO | MFP_LPM_DRIVE_LOW, /* SYNAPTICS_POWER_ON */ GPIO10_GPIO, /* GSM_IRQ */ @@ -872,14 +880,19 @@ static struct gpio global_gpios[] = { { GPIO110_HX4700_LCD_LVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_LVDD" }, { GPIO111_HX4700_LCD_AVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_AVDD" }, { GPIO32_HX4700_RS232_ON, GPIOF_OUT_INIT_HIGH, "RS232_ON" }, + { GPIO61_HX4700_W3220_nRESET, GPIOF_OUT_INIT_HIGH, "W3220_nRESET" }, { GPIO71_HX4700_ASIC3_nRESET, GPIOF_OUT_INIT_HIGH, "ASIC3_nRESET" }, + { GPIO81_HX4700_CPU_GP_nRESET, GPIOF_OUT_INIT_HIGH, "CPU_GP_nRESET" }, { GPIO82_HX4700_EUART_RESET, GPIOF_OUT_INIT_HIGH, "EUART_RESET" }, + { GPIO116_HX4700_CPU_HW_nRESET, GPIOF_OUT_INIT_HIGH, "CPU_HW_nRESET" }, }; static void __init hx4700_init(void) { int ret; + PCFR = PCFR_GPR_EN | PCFR_OPDE; + pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config)); gpio_set_wake(GPIO12_HX4700_ASIC3_IRQ, 1); ret = gpio_request_array(ARRAY_AND_SIZE(global_gpios)); diff --git a/arch/arm/mach-s3c24xx/clock-s3c2440.c b/arch/arm/mach-s3c24xx/clock-s3c2440.c index 414364e..cb2883d 100644 --- a/arch/arm/mach-s3c24xx/clock-s3c2440.c +++ b/arch/arm/mach-s3c24xx/clock-s3c2440.c @@ -106,7 +106,7 @@ static struct clk s3c2440_clk_cam_upll = { static struct clk s3c2440_clk_ac97 = { .name = "ac97", .enable = s3c2410_clkcon_enable, - .ctrlbit = S3C2440_CLKCON_CAMERA, + .ctrlbit = S3C2440_CLKCON_AC97, }; static unsigned long s3c2440_fclk_n_getrate(struct clk *clk) diff --git a/arch/arm/mach-shmobile/board-armadillo800eva.c b/arch/arm/mach-shmobile/board-armadillo800eva.c index 9e37026..9bd1355 100644 --- a/arch/arm/mach-shmobile/board-armadillo800eva.c +++ b/arch/arm/mach-shmobile/board-armadillo800eva.c @@ -779,6 +779,7 @@ DT_MACHINE_START(ARMADILLO800EVA_DT, "armadillo800eva") .init_irq = r8a7740_init_irq, .handle_irq = shmobile_handle_irq_intc, .init_machine = eva_init, + .init_late = shmobile_init_late, .timer = &shmobile_timer, .dt_compat = eva_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-kzm9d.c b/arch/arm/mach-shmobile/board-kzm9d.c index 7bc5e7d..6a33cf3 100644 --- a/arch/arm/mach-shmobile/board-kzm9d.c +++ b/arch/arm/mach-shmobile/board-kzm9d.c @@ -80,6 +80,7 @@ DT_MACHINE_START(KZM9D_DT, "kzm9d") .init_irq = emev2_init_irq, .handle_irq = gic_handle_irq, .init_machine = kzm9d_add_standard_devices, + .init_late = shmobile_init_late, .timer = &shmobile_timer, .dt_compat = kzm9d_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index d8e33b6..c0ae815 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -455,6 +455,7 @@ DT_MACHINE_START(KZM9G_DT, "kzm9g") .init_irq = sh73a0_init_irq, .handle_irq = gic_handle_irq, .init_machine = kzm_init, + .init_late = shmobile_init_late, .timer = &shmobile_timer, .dt_compat = kzm9g_boards_compat_dt, MACHINE_END diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index b577f7c..150122a 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -1512,6 +1512,9 @@ static void __init mackerel_init(void) gpio_request(GPIO_FN_SDHID0_1, NULL); gpio_request(GPIO_FN_SDHID0_0, NULL); + /* SDHI0 PORT172 card-detect IRQ26 */ + gpio_request(GPIO_FN_IRQ26_172, NULL); + #if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE) /* enable SDHI1 */ gpio_request(GPIO_FN_SDHICMD1, NULL); diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index 472d1f5..3946c4b 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -475,9 +475,9 @@ static struct clk *late_main_clks[] = { enum { MSTP001, MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100, - MSTP219, + MSTP219, MSTP218, MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, - MSTP331, MSTP329, MSTP325, MSTP323, MSTP318, + MSTP331, MSTP329, MSTP325, MSTP323, MSTP314, MSTP313, MSTP312, MSTP311, MSTP303, MSTP302, MSTP301, MSTP300, MSTP411, MSTP410, MSTP403, @@ -497,6 +497,7 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP116] = MSTP(&div4_clks[DIV4_HP], SMSTPCR1, 16, 0), /* IIC0 */ [MSTP100] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */ [MSTP219] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 19, 0), /* SCIFA7 */ + [MSTP218] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* SY-DMAC */ [MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */ [MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */ [MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */ @@ -508,7 +509,6 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */ [MSTP325] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IrDA */ [MSTP323] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */ - [MSTP318] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 18, 0), /* SY-DMAC */ [MSTP314] = MSTP(&div6_clks[DIV6_SDHI0], SMSTPCR3, 14, 0), /* SDHI0 */ [MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */ [MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */ @@ -552,6 +552,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */ CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */ CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */ + CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* SY-DMAC */ CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */ CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */ @@ -563,7 +564,6 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */ CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */ CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */ - CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP318]), /* SY-DMAC */ CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */ diff --git a/arch/arm/mach-shmobile/intc-r8a7779.c b/arch/arm/mach-shmobile/intc-r8a7779.c index 550b23d..f04fad4 100644 --- a/arch/arm/mach-shmobile/intc-r8a7779.c +++ b/arch/arm/mach-shmobile/intc-r8a7779.c @@ -35,6 +35,9 @@ #define INT2SMSKCR3 0xfe7822ac #define INT2SMSKCR4 0xfe7822b0 +#define INT2NTSR0 0xfe700060 +#define INT2NTSR1 0xfe700064 + static int r8a7779_set_wake(struct irq_data *data, unsigned int on) { return 0; /* always allow wakeup */ @@ -49,6 +52,10 @@ void __init r8a7779_init_irq(void) gic_init(0, 29, gic_dist_base, gic_cpu_base); gic_arch_extn.irq_set_wake = r8a7779_set_wake; + /* route all interrupts to ARM */ + __raw_writel(0xffffffff, INT2NTSR0); + __raw_writel(0x3fffffff, INT2NTSR1); + /* unmask all known interrupts in INTCS2 */ __raw_writel(0xfffffff0, INT2SMSKCR0); __raw_writel(0xfff7ffff, INT2SMSKCR1); diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c index bacdd66..fde0d23 100644 --- a/arch/arm/mach-shmobile/platsmp.c +++ b/arch/arm/mach-shmobile/platsmp.c @@ -22,10 +22,20 @@ #include <mach/common.h> #include <mach/emev2.h> +#ifdef CONFIG_ARCH_SH73A0 #define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || \ of_machine_is_compatible("renesas,sh73a0")) +#else +#define is_sh73a0() (0) +#endif + #define is_r8a7779() machine_is_marzen() + +#ifdef CONFIG_ARCH_EMEV2 #define is_emev2() of_machine_is_compatible("renesas,emev2") +#else +#define is_emev2() (0) +#endif static unsigned int __init shmobile_smp_get_core_count(void) { diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index 6a4bd58..fafce9c 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -484,7 +484,7 @@ static const struct sh_dmae_slave_config sh7372_dmae_slaves[] = { }, }; -#define SH7372_CHCLR 0x220 +#define SH7372_CHCLR (0x220 - 0x20) static const struct sh_dmae_channel sh7372_dmae_channels[] = { { diff --git a/arch/arm/mach-spear13xx/include/mach/debug-macro.S b/arch/arm/mach-spear13xx/include/mach/debug-macro.S index ea15646..9e3ae6b 100644 --- a/arch/arm/mach-spear13xx/include/mach/debug-macro.S +++ b/arch/arm/mach-spear13xx/include/mach/debug-macro.S @@ -4,7 +4,7 @@ * Debugging macro include header spear13xx machine family * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/include/mach/dma.h b/arch/arm/mach-spear13xx/include/mach/dma.h index 383ab04..d50bdb6 100644 --- a/arch/arm/mach-spear13xx/include/mach/dma.h +++ b/arch/arm/mach-spear13xx/include/mach/dma.h @@ -4,7 +4,7 @@ * DMA information for SPEAr13xx machine family * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/include/mach/generic.h b/arch/arm/mach-spear13xx/include/mach/generic.h index 6d8c45b..dac57fd 100644 --- a/arch/arm/mach-spear13xx/include/mach/generic.h +++ b/arch/arm/mach-spear13xx/include/mach/generic.h @@ -4,7 +4,7 @@ * spear13xx machine family generic header file * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/include/mach/gpio.h b/arch/arm/mach-spear13xx/include/mach/gpio.h index cd6f4f8..85f1763 100644 --- a/arch/arm/mach-spear13xx/include/mach/gpio.h +++ b/arch/arm/mach-spear13xx/include/mach/gpio.h @@ -4,7 +4,7 @@ * GPIO macros for SPEAr13xx machine family * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/include/mach/irqs.h b/arch/arm/mach-spear13xx/include/mach/irqs.h index f542a24..271a62b 100644 --- a/arch/arm/mach-spear13xx/include/mach/irqs.h +++ b/arch/arm/mach-spear13xx/include/mach/irqs.h @@ -4,7 +4,7 @@ * IRQ helper macros for spear13xx machine family * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/include/mach/spear.h b/arch/arm/mach-spear13xx/include/mach/spear.h index 30c57ef..65f27de 100644 --- a/arch/arm/mach-spear13xx/include/mach/spear.h +++ b/arch/arm/mach-spear13xx/include/mach/spear.h @@ -4,7 +4,7 @@ * spear13xx Machine family specific definition * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/include/mach/timex.h b/arch/arm/mach-spear13xx/include/mach/timex.h index 31af3e8..3a58b82 100644 --- a/arch/arm/mach-spear13xx/include/mach/timex.h +++ b/arch/arm/mach-spear13xx/include/mach/timex.h @@ -4,7 +4,7 @@ * SPEAr3XX machine family specific timex definitions * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/include/mach/uncompress.h b/arch/arm/mach-spear13xx/include/mach/uncompress.h index c784089..70fe72f 100644 --- a/arch/arm/mach-spear13xx/include/mach/uncompress.h +++ b/arch/arm/mach-spear13xx/include/mach/uncompress.h @@ -4,7 +4,7 @@ * Serial port stubs for kernel decompress status messages * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/spear1310.c b/arch/arm/mach-spear13xx/spear1310.c index fefd15b..732d29b 100644 --- a/arch/arm/mach-spear13xx/spear1310.c +++ b/arch/arm/mach-spear13xx/spear1310.c @@ -4,7 +4,7 @@ * SPEAr1310 machine source file * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/spear1340.c b/arch/arm/mach-spear13xx/spear1340.c index ee38cbc..81e4ed7 100644 --- a/arch/arm/mach-spear13xx/spear1340.c +++ b/arch/arm/mach-spear13xx/spear1340.c @@ -4,7 +4,7 @@ * SPEAr1340 machine source file * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear13xx/spear13xx.c b/arch/arm/mach-spear13xx/spear13xx.c index 50b349a..cf936b1 100644 --- a/arch/arm/mach-spear13xx/spear13xx.c +++ b/arch/arm/mach-spear13xx/spear13xx.c @@ -4,7 +4,7 @@ * SPEAr13XX machines common source file * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/debug-macro.S b/arch/arm/mach-spear3xx/include/mach/debug-macro.S index 590519f..0a6381f 100644 --- a/arch/arm/mach-spear3xx/include/mach/debug-macro.S +++ b/arch/arm/mach-spear3xx/include/mach/debug-macro.S @@ -4,7 +4,7 @@ * Debugging macro include header spear3xx machine family * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar<viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/generic.h b/arch/arm/mach-spear3xx/include/mach/generic.h index 4a95b94..ce19113 100644 --- a/arch/arm/mach-spear3xx/include/mach/generic.h +++ b/arch/arm/mach-spear3xx/include/mach/generic.h @@ -4,7 +4,7 @@ * SPEAr3XX machine family generic header file * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar<viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/gpio.h b/arch/arm/mach-spear3xx/include/mach/gpio.h index 451b208..2ac74c6 100644 --- a/arch/arm/mach-spear3xx/include/mach/gpio.h +++ b/arch/arm/mach-spear3xx/include/mach/gpio.h @@ -4,7 +4,7 @@ * GPIO macros for SPEAr3xx machine family * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar<viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/irqs.h b/arch/arm/mach-spear3xx/include/mach/irqs.h index 51bd62a..803de76 100644 --- a/arch/arm/mach-spear3xx/include/mach/irqs.h +++ b/arch/arm/mach-spear3xx/include/mach/irqs.h @@ -4,7 +4,7 @@ * IRQ helper macros for SPEAr3xx machine family * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/misc_regs.h b/arch/arm/mach-spear3xx/include/mach/misc_regs.h index 18e2ac5..6309bf6 100644 --- a/arch/arm/mach-spear3xx/include/mach/misc_regs.h +++ b/arch/arm/mach-spear3xx/include/mach/misc_regs.h @@ -4,7 +4,7 @@ * Miscellaneous registers definitions for SPEAr3xx machine family * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/spear.h b/arch/arm/mach-spear3xx/include/mach/spear.h index 51eb953..8cca951 100644 --- a/arch/arm/mach-spear3xx/include/mach/spear.h +++ b/arch/arm/mach-spear3xx/include/mach/spear.h @@ -4,7 +4,7 @@ * SPEAr3xx Machine family specific definition * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/timex.h b/arch/arm/mach-spear3xx/include/mach/timex.h index a38cc9d..9f5d08b 100644 --- a/arch/arm/mach-spear3xx/include/mach/timex.h +++ b/arch/arm/mach-spear3xx/include/mach/timex.h @@ -4,7 +4,7 @@ * SPEAr3XX machine family specific timex definitions * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/include/mach/uncompress.h b/arch/arm/mach-spear3xx/include/mach/uncompress.h index 53ba8bb..b909b01 100644 --- a/arch/arm/mach-spear3xx/include/mach/uncompress.h +++ b/arch/arm/mach-spear3xx/include/mach/uncompress.h @@ -4,7 +4,7 @@ * Serial port stubs for kernel decompress status messages * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/spear300.c b/arch/arm/mach-spear3xx/spear300.c index f74a05b..0f882ec 100644 --- a/arch/arm/mach-spear3xx/spear300.c +++ b/arch/arm/mach-spear3xx/spear300.c @@ -4,7 +4,7 @@ * SPEAr300 machine source file * * Copyright (C) 2009-2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/spear310.c b/arch/arm/mach-spear3xx/spear310.c index 84dfb09..bbcf457 100644 --- a/arch/arm/mach-spear3xx/spear310.c +++ b/arch/arm/mach-spear3xx/spear310.c @@ -4,7 +4,7 @@ * SPEAr310 machine source file * * Copyright (C) 2009-2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/spear320.c b/arch/arm/mach-spear3xx/spear320.c index a88fa84..88d483b 100644 --- a/arch/arm/mach-spear3xx/spear320.c +++ b/arch/arm/mach-spear3xx/spear320.c @@ -4,7 +4,7 @@ * SPEAr320 machine source file * * Copyright (C) 2009-2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear3xx/spear3xx.c b/arch/arm/mach-spear3xx/spear3xx.c index f22419e..66db5f1 100644 --- a/arch/arm/mach-spear3xx/spear3xx.c +++ b/arch/arm/mach-spear3xx/spear3xx.c @@ -4,7 +4,7 @@ * SPEAr3XX machines common source file * * Copyright (C) 2009-2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any @@ -87,7 +87,7 @@ void __init spear3xx_map_io(void) static void __init spear3xx_timer_init(void) { - char pclk_name[] = "pll3_48m_clk"; + char pclk_name[] = "pll3_clk"; struct clk *gpt_clk, *pclk; spear3xx_clk_init(); diff --git a/arch/arm/mach-spear6xx/include/mach/gpio.h b/arch/arm/mach-spear6xx/include/mach/gpio.h index 3a789db..d42cefc 100644 --- a/arch/arm/mach-spear6xx/include/mach/gpio.h +++ b/arch/arm/mach-spear6xx/include/mach/gpio.h @@ -4,7 +4,7 @@ * GPIO macros for SPEAr6xx machine family * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear6xx/include/mach/misc_regs.h b/arch/arm/mach-spear6xx/include/mach/misc_regs.h index 179e457..c34acc2 100644 --- a/arch/arm/mach-spear6xx/include/mach/misc_regs.h +++ b/arch/arm/mach-spear6xx/include/mach/misc_regs.h @@ -4,7 +4,7 @@ * Miscellaneous registers definitions for SPEAr6xx machine family * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/mach-spear6xx/spear6xx.c b/arch/arm/mach-spear6xx/spear6xx.c index 2e2e359..9af67d0 100644 --- a/arch/arm/mach-spear6xx/spear6xx.c +++ b/arch/arm/mach-spear6xx/spear6xx.c @@ -423,7 +423,7 @@ void __init spear6xx_map_io(void) static void __init spear6xx_timer_init(void) { - char pclk_name[] = "pll3_48m_clk"; + char pclk_name[] = "pll3_clk"; struct clk *gpt_clk, *pclk; spear6xx_clk_init(); diff --git a/arch/arm/mach-tegra/reset.c b/arch/arm/mach-tegra/reset.c index 4d6a2ee..5beb7eb 100644 --- a/arch/arm/mach-tegra/reset.c +++ b/arch/arm/mach-tegra/reset.c @@ -33,7 +33,7 @@ static bool is_enabled; -static void tegra_cpu_reset_handler_enable(void) +static void __init tegra_cpu_reset_handler_enable(void) { void __iomem *iram_base = IO_ADDRESS(TEGRA_IRAM_RESET_BASE); void __iomem *evp_cpu_reset = diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 9c74ac5..4fd93f5 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -580,43 +580,12 @@ static void ux500_uart0_reset(void) udelay(1); } -/* This needs to be referenced by callbacks */ -struct pinctrl *u0_p; -struct pinctrl_state *u0_def; -struct pinctrl_state *u0_sleep; - -static void ux500_uart0_init(void) -{ - int ret; - - if (IS_ERR(u0_p) || IS_ERR(u0_def)) - return; - - ret = pinctrl_select_state(u0_p, u0_def); - if (ret) - pr_err("could not set UART0 defstate\n"); -} - -static void ux500_uart0_exit(void) -{ - int ret; - - if (IS_ERR(u0_p) || IS_ERR(u0_sleep)) - return; - - ret = pinctrl_select_state(u0_p, u0_sleep); - if (ret) - pr_err("could not set UART0 idlestate\n"); -} - static struct amba_pl011_data uart0_plat = { #ifdef CONFIG_STE_DMA40 .dma_filter = stedma40_filter, .dma_rx_param = &uart0_dma_cfg_rx, .dma_tx_param = &uart0_dma_cfg_tx, #endif - .init = ux500_uart0_init, - .exit = ux500_uart0_exit, .reset = ux500_uart0_reset, }; @@ -638,28 +607,7 @@ static struct amba_pl011_data uart2_plat = { static void __init mop500_uart_init(struct device *parent) { - struct amba_device *uart0_device; - - uart0_device = db8500_add_uart0(parent, &uart0_plat); - if (uart0_device) { - u0_p = pinctrl_get(&uart0_device->dev); - if (IS_ERR(u0_p)) - dev_err(&uart0_device->dev, - "could not get UART0 pinctrl\n"); - else { - u0_def = pinctrl_lookup_state(u0_p, - PINCTRL_STATE_DEFAULT); - if (IS_ERR(u0_def)) { - dev_err(&uart0_device->dev, - "could not get UART0 defstate\n"); - } - u0_sleep = pinctrl_lookup_state(u0_p, - PINCTRL_STATE_SLEEP); - if (IS_ERR(u0_sleep)) - dev_err(&uart0_device->dev, - "could not get UART0 idlestate\n"); - } - } + db8500_add_uart0(parent, &uart0_plat); db8500_add_uart1(parent, &uart1_plat); db8500_add_uart2(parent, &uart2_plat); } @@ -677,11 +625,6 @@ static struct platform_device *snowball_platform_devs[] __initdata = { &ab8500_device, }; -static struct platform_device *snowball_of_platform_devs[] __initdata = { - &snowball_led_dev, - &snowball_key_dev, -}; - static void __init mop500_init_machine(void) { struct device *parent = NULL; @@ -821,6 +764,11 @@ MACHINE_END #ifdef CONFIG_MACH_UX500_DT +static struct platform_device *snowball_of_platform_devs[] __initdata = { + &snowball_led_dev, + &snowball_key_dev, +}; + struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { /* Requires DMA and call-back bindings. */ OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat), @@ -838,6 +786,8 @@ struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL), OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL), OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL), + /* Requires device name bindings. */ + OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL), {}, }; diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c index 741e71f..66e7f00 100644 --- a/arch/arm/mach-ux500/timer.c +++ b/arch/arm/mach-ux500/timer.c @@ -63,8 +63,10 @@ static void __init ux500_timer_init(void) /* TODO: Once MTU has been DT:ed place code above into else. */ if (of_have_populated_dt()) { +#ifdef CONFIG_OF np = of_find_matching_node(NULL, prcmu_timer_of_match); if (!np) +#endif goto dt_fail; tmp_base = of_iomap(np, 0); diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index cf4687e..cd8ea35 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -169,26 +169,13 @@ static struct map_desc versatile_io_desc[] __initdata = { .pfn = __phys_to_pfn(VERSATILE_PCI_CFG_BASE), .length = VERSATILE_PCI_CFG_BASE_SIZE, .type = MT_DEVICE - }, -#if 0 - { - .virtual = VERSATILE_PCI_VIRT_MEM_BASE0, - .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE0), - .length = SZ_16M, - .type = MT_DEVICE }, { - .virtual = VERSATILE_PCI_VIRT_MEM_BASE1, - .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE1), - .length = SZ_16M, - .type = MT_DEVICE - }, { - .virtual = VERSATILE_PCI_VIRT_MEM_BASE2, - .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE2), - .length = SZ_16M, + .virtual = (unsigned long)VERSATILE_PCI_VIRT_MEM_BASE0, + .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE0), + .length = IO_SPACE_LIMIT, .type = MT_DEVICE }, #endif -#endif }; void __init versatile_map_io(void) diff --git a/arch/arm/mach-versatile/include/mach/hardware.h b/arch/arm/mach-versatile/include/mach/hardware.h index 4d4973d..408e58d 100644 --- a/arch/arm/mach-versatile/include/mach/hardware.h +++ b/arch/arm/mach-versatile/include/mach/hardware.h @@ -29,8 +29,9 @@ */ #define VERSATILE_PCI_VIRT_BASE (void __iomem *)0xe8000000ul #define VERSATILE_PCI_CFG_VIRT_BASE (void __iomem *)0xe9000000ul +#define VERSATILE_PCI_VIRT_MEM_BASE0 (void __iomem *)PCIO_BASE -/* macro to get at IO space when running virtually */ +/* macro to get at MMIO space when running virtually */ #define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000) #define __io_address(n) ((void __iomem __force *)IO_ADDRESS(n)) diff --git a/arch/arm/mach-versatile/include/mach/io.h b/arch/arm/mach-versatile/include/mach/io.h new file mode 100644 index 0000000..0406513 --- /dev/null +++ b/arch/arm/mach-versatile/include/mach/io.h @@ -0,0 +1,27 @@ +/* + * arch/arm/mach-versatile/include/mach/io.h + * + * Copyright (C) 2003 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +#define PCIO_BASE 0xeb000000ul + +#define __io(a) ((a) + PCIO_BASE) + +#endif diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c index 15c6a00..e95bf84 100644 --- a/arch/arm/mach-versatile/pci.c +++ b/arch/arm/mach-versatile/pci.c @@ -169,11 +169,18 @@ static struct pci_ops pci_versatile_ops = { .write = versatile_write_config, }; +static struct resource io_port = { + .name = "PCI", + .start = 0, + .end = IO_SPACE_LIMIT, + .flags = IORESOURCE_IO, +}; + static struct resource io_mem = { .name = "PCI I/O space", .start = VERSATILE_PCI_MEM_BASE0, .end = VERSATILE_PCI_MEM_BASE0+VERSATILE_PCI_MEM_BASE0_SIZE-1, - .flags = IORESOURCE_IO, + .flags = IORESOURCE_MEM, }; static struct resource non_mem = { @@ -200,6 +207,12 @@ static int __init pci_versatile_setup_resources(struct pci_sys_data *sys) "memory region (%d)\n", ret); goto out; } + ret = request_resource(&ioport_resource, &io_port); + if (ret) { + printk(KERN_ERR "PCI: unable to allocate I/O " + "port region (%d)\n", ret); + goto out; + } ret = request_resource(&iomem_resource, &non_mem); if (ret) { printk(KERN_ERR "PCI: unable to allocate non-prefetchable " @@ -218,7 +231,7 @@ static int __init pci_versatile_setup_resources(struct pci_sys_data *sys) * the mem resource for this bus * the prefetch mem resource for this bus */ - pci_add_resource_offset(&sys->resources, &io_mem, sys->io_offset); + pci_add_resource_offset(&sys->resources, &io_port, sys->io_offset); pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset); pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset); @@ -249,6 +262,7 @@ int __init pci_versatile_setup(int nr, struct pci_sys_data *sys) if (nr == 0) { sys->mem_offset = 0; + sys->io_offset = 0; ret = pci_versatile_setup_resources(sys); if (ret < 0) { printk("pci_versatile_setup: resources... oops?\n"); @@ -325,7 +339,6 @@ void __init pci_versatile_preinit(void) static int __init versatile_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; - int devslot = PCI_SLOT(dev->devfn); /* slot, pin, irq * 24 1 27 diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 106c4c0..655878b 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -228,7 +228,7 @@ static pte_t **consistent_pte; #define DEFAULT_CONSISTENT_DMA_SIZE SZ_2M -unsigned long consistent_base = CONSISTENT_END - DEFAULT_CONSISTENT_DMA_SIZE; +static unsigned long consistent_base = CONSISTENT_END - DEFAULT_CONSISTENT_DMA_SIZE; void __init init_consistent_dma_size(unsigned long size) { @@ -321,7 +321,7 @@ static struct arm_vmregion_head coherent_head = { .vm_list = LIST_HEAD_INIT(coherent_head.vm_list), }; -size_t coherent_pool_size = DEFAULT_CONSISTENT_DMA_SIZE / 8; +static size_t coherent_pool_size = DEFAULT_CONSISTENT_DMA_SIZE / 8; static int __init early_coherent_pool(char *p) { @@ -1067,7 +1067,7 @@ static struct page **__iommu_alloc_buffer(struct device *dev, size_t size, gfp_t return NULL; while (count) { - int j, order = __ffs(count); + int j, order = __fls(count); pages[i] = alloc_pages(gfp | __GFP_NOWARN, order); while (!pages[i] && order) @@ -1091,7 +1091,7 @@ error: while (--i) if (pages[i]) __free_pages(pages[i], 0); - if (array_size < PAGE_SIZE) + if (array_size <= PAGE_SIZE) kfree(pages); else vfree(pages); @@ -1106,7 +1106,7 @@ static int __iommu_free_buffer(struct device *dev, struct page **pages, size_t s for (i = 0; i < count; i++) if (pages[i]) __free_pages(pages[i], 0); - if (array_size < PAGE_SIZE) + if (array_size <= PAGE_SIZE) kfree(pages); else vfree(pages); diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index c21d06c..f54d592 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -212,7 +212,7 @@ EXPORT_SYMBOL(arm_dma_zone_size); * allocations. This must be the smallest DMA mask in the system, * so a successful GFP_DMA allocation will always satisfy this. */ -u32 arm_dma_limit; +phys_addr_t arm_dma_limit; static void __init arm_adjust_dma_zone(unsigned long *size, unsigned long *hole, unsigned long dma_size) diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index 93dc0c1..2e8a1ef 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -62,9 +62,9 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page #endif #ifdef CONFIG_ZONE_DMA -extern u32 arm_dma_limit; +extern phys_addr_t arm_dma_limit; #else -#define arm_dma_limit ((u32)~0) +#define arm_dma_limit ((phys_addr_t)~0) #endif extern phys_addr_t arm_lowmem_limit; diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index e5dad60..cf4528d 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -791,6 +791,79 @@ void __init iotable_init(struct map_desc *io_desc, int nr) } } +#ifndef CONFIG_ARM_LPAE + +/* + * The Linux PMD is made of two consecutive section entries covering 2MB + * (see definition in include/asm/pgtable-2level.h). However a call to + * create_mapping() may optimize static mappings by using individual + * 1MB section mappings. This leaves the actual PMD potentially half + * initialized if the top or bottom section entry isn't used, leaving it + * open to problems if a subsequent ioremap() or vmalloc() tries to use + * the virtual space left free by that unused section entry. + * + * Let's avoid the issue by inserting dummy vm entries covering the unused + * PMD halves once the static mappings are in place. + */ + +static void __init pmd_empty_section_gap(unsigned long addr) +{ + struct vm_struct *vm; + + vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm)); + vm->addr = (void *)addr; + vm->size = SECTION_SIZE; + vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING; + vm->caller = pmd_empty_section_gap; + vm_area_add_early(vm); +} + +static void __init fill_pmd_gaps(void) +{ + struct vm_struct *vm; + unsigned long addr, next = 0; + pmd_t *pmd; + + /* we're still single threaded hence no lock needed here */ + for (vm = vmlist; vm; vm = vm->next) { + if (!(vm->flags & VM_ARM_STATIC_MAPPING)) + continue; + addr = (unsigned long)vm->addr; + if (addr < next) + continue; + + /* + * Check if this vm starts on an odd section boundary. + * If so and the first section entry for this PMD is free + * then we block the corresponding virtual address. + */ + if ((addr & ~PMD_MASK) == SECTION_SIZE) { + pmd = pmd_off_k(addr); + if (pmd_none(*pmd)) + pmd_empty_section_gap(addr & PMD_MASK); + } + + /* + * Then check if this vm ends on an odd section boundary. + * If so and the second section entry for this PMD is empty + * then we block the corresponding virtual address. + */ + addr += vm->size; + if ((addr & ~PMD_MASK) == SECTION_SIZE) { + pmd = pmd_off_k(addr) + 1; + if (pmd_none(*pmd)) + pmd_empty_section_gap(addr); + } + + /* no need to look at any vm entry until we hit the next PMD */ + next = (addr + PMD_SIZE - 1) & PMD_MASK; + } +} + +#else +#define fill_pmd_gaps() do { } while (0) +#endif + static void * __initdata vmalloc_min = (void *)(VMALLOC_END - (240 << 20) - VMALLOC_OFFSET); @@ -1072,6 +1145,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc) */ if (mdesc->map_io) mdesc->map_io(); + fill_pmd_gaps(); /* * Finally flush the caches and tlb to ensure that we're in a diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c index 62135849..c641fb6 100644 --- a/arch/arm/net/bpf_jit_32.c +++ b/arch/arm/net/bpf_jit_32.c @@ -762,6 +762,11 @@ b_epilogue: update_on_xread(ctx); emit(ARM_MOV_R(r_A, r_X), ctx); break; + case BPF_S_ANC_ALU_XOR_X: + /* A ^= X */ + update_on_xread(ctx); + emit(ARM_EOR_R(r_A, r_A, r_X), ctx); + break; case BPF_S_ANC_PROTOCOL: /* A = ntohs(skb->protocol) */ ctx->seen |= SEEN_SKB; diff --git a/arch/arm/net/bpf_jit_32.h b/arch/arm/net/bpf_jit_32.h index 99ae5e3..7fa2f7d 100644 --- a/arch/arm/net/bpf_jit_32.h +++ b/arch/arm/net/bpf_jit_32.h @@ -68,6 +68,8 @@ #define ARM_INST_CMP_R 0x01500000 #define ARM_INST_CMP_I 0x03500000 +#define ARM_INST_EOR_R 0x00200000 + #define ARM_INST_LDRB_I 0x05d00000 #define ARM_INST_LDRB_R 0x07d00000 #define ARM_INST_LDRH_I 0x01d000b0 @@ -132,6 +134,8 @@ #define ARM_CMP_R(rn, rm) _AL3_R(ARM_INST_CMP, 0, rn, rm) #define ARM_CMP_I(rn, imm) _AL3_I(ARM_INST_CMP, 0, rn, imm) +#define ARM_EOR_R(rd, rn, rm) _AL3_R(ARM_INST_EOR, rd, rn, rm) + #define ARM_LDR_I(rt, rn, off) (ARM_INST_LDR_I | (rt) << 12 | (rn) << 16 \ | (off)) #define ARM_LDRB_I(rt, rn, off) (ARM_INST_LDRB_I | (rt) << 12 | (rn) << 16 \ diff --git a/arch/arm/plat-mxc/epit.c b/arch/arm/plat-mxc/epit.c index 9129c9e..88726f4 100644 --- a/arch/arm/plat-mxc/epit.c +++ b/arch/arm/plat-mxc/epit.c @@ -50,6 +50,7 @@ #include <linux/irq.h> #include <linux/clockchips.h> #include <linux/clk.h> +#include <linux/err.h> #include <mach/hardware.h> #include <asm/mach/time.h> @@ -201,8 +202,16 @@ static int __init epit_clockevent_init(struct clk *timer_clk) return 0; } -void __init epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq) +void __init epit_timer_init(void __iomem *base, int irq) { + struct clk *timer_clk; + + timer_clk = clk_get_sys("imx-epit.0", NULL); + if (IS_ERR(timer_clk)) { + pr_err("i.MX epit: unable to get clk\n"); + return; + } + clk_prepare_enable(timer_clk); timer_base = base; diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index cf663d8..e429ca1 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -54,8 +54,8 @@ extern void imx50_soc_init(void); extern void imx51_soc_init(void); extern void imx53_soc_init(void); extern void imx51_init_late(void); -extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq); -extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int); +extern void epit_timer_init(void __iomem *base, int irq); +extern void mxc_timer_init(void __iomem *, int); extern int mx1_clocks_init(unsigned long fref); extern int mx21_clocks_init(unsigned long lref, unsigned long fref); extern int mx25_clocks_init(void); diff --git a/arch/arm/plat-mxc/include/mach/mx2_cam.h b/arch/arm/plat-mxc/include/mach/mx2_cam.h index 7ded6f1..3c080a3 100644 --- a/arch/arm/plat-mxc/include/mach/mx2_cam.h +++ b/arch/arm/plat-mxc/include/mach/mx2_cam.h @@ -23,6 +23,7 @@ #ifndef __MACH_MX2_CAM_H_ #define __MACH_MX2_CAM_H_ +#define MX2_CAMERA_SWAP16 (1 << 0) #define MX2_CAMERA_EXT_VSYNC (1 << 1) #define MX2_CAMERA_CCIR (1 << 2) #define MX2_CAMERA_CCIR_INTERLACE (1 << 3) @@ -30,6 +31,7 @@ #define MX2_CAMERA_GATED_CLOCK (1 << 5) #define MX2_CAMERA_INV_DATA (1 << 6) #define MX2_CAMERA_PCLK_SAMPLE_RISING (1 << 7) +#define MX2_CAMERA_PACK_DIR_MSB (1 << 8) /** * struct mx2_camera_platform_data - optional platform data for mx2_camera diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c index 99f958c..00e8e659 100644 --- a/arch/arm/plat-mxc/time.c +++ b/arch/arm/plat-mxc/time.c @@ -58,6 +58,7 @@ /* MX31, MX35, MX25, MX5 */ #define V2_TCTL_WAITEN (1 << 3) /* Wait enable mode */ #define V2_TCTL_CLK_IPG (1 << 6) +#define V2_TCTL_CLK_PER (2 << 6) #define V2_TCTL_FRR (1 << 9) #define V2_IR 0x0c #define V2_TSTAT 0x08 @@ -280,23 +281,22 @@ static int __init mxc_clockevent_init(struct clk *timer_clk) return 0; } -void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq) +void __init mxc_timer_init(void __iomem *base, int irq) { uint32_t tctl_val; + struct clk *timer_clk; struct clk *timer_ipg_clk; - if (!timer_clk) { - timer_clk = clk_get_sys("imx-gpt.0", "per"); - if (IS_ERR(timer_clk)) { - pr_err("i.MX timer: unable to get clk\n"); - return; - } - - timer_ipg_clk = clk_get_sys("imx-gpt.0", "ipg"); - if (!IS_ERR(timer_ipg_clk)) - clk_prepare_enable(timer_ipg_clk); + timer_clk = clk_get_sys("imx-gpt.0", "per"); + if (IS_ERR(timer_clk)) { + pr_err("i.MX timer: unable to get clk\n"); + return; } + timer_ipg_clk = clk_get_sys("imx-gpt.0", "ipg"); + if (!IS_ERR(timer_ipg_clk)) + clk_prepare_enable(timer_ipg_clk); + clk_prepare_enable(timer_clk); timer_base = base; @@ -309,7 +309,7 @@ void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq) __raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */ if (timer_is_v2()) - tctl_val = V2_TCTL_CLK_IPG | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN; + tctl_val = V2_TCTL_CLK_PER | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN; else tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN; diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 62ec5c4..706b7e2 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -461,6 +461,7 @@ static int clk_dbg_show_summary(struct seq_file *s, void *unused) struct clk *c; struct clk *pa; + mutex_lock(&clocks_mutex); seq_printf(s, "%-30s %-30s %-10s %s\n", "clock-name", "parent-name", "rate", "use-count"); @@ -469,6 +470,7 @@ static int clk_dbg_show_summary(struct seq_file *s, void *unused) seq_printf(s, "%-30s %-30s %-10lu %d\n", c->name, pa ? pa->name : "none", c->rate, c->usecount); } + mutex_unlock(&clocks_mutex); return 0; } diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 297245d..de6c0a0 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -252,8 +252,6 @@ IS_AM_SUBCLASS(335x, 0x335) * cpu_is_omap2423(): True for OMAP2423 * cpu_is_omap2430(): True for OMAP2430 * cpu_is_omap3430(): True for OMAP3430 - * cpu_is_omap3505(): True for OMAP3505 - * cpu_is_omap3517(): True for OMAP3517 */ #define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff) @@ -277,8 +275,6 @@ IS_OMAP_TYPE(2422, 0x2422) IS_OMAP_TYPE(2423, 0x2423) IS_OMAP_TYPE(2430, 0x2430) IS_OMAP_TYPE(3430, 0x3430) -IS_OMAP_TYPE(3505, 0x3517) -IS_OMAP_TYPE(3517, 0x3517) #define cpu_is_omap310() 0 #define cpu_is_omap730() 0 @@ -293,12 +289,6 @@ IS_OMAP_TYPE(3517, 0x3517) #define cpu_is_omap2422() 0 #define cpu_is_omap2423() 0 #define cpu_is_omap2430() 0 -#define cpu_is_omap3503() 0 -#define cpu_is_omap3515() 0 -#define cpu_is_omap3525() 0 -#define cpu_is_omap3530() 0 -#define cpu_is_omap3505() 0 -#define cpu_is_omap3517() 0 #define cpu_is_omap3430() 0 #define cpu_is_omap3630() 0 @@ -350,12 +340,6 @@ IS_OMAP_TYPE(3517, 0x3517) #if defined(CONFIG_ARCH_OMAP3) # undef cpu_is_omap3430 -# undef cpu_is_omap3503 -# undef cpu_is_omap3515 -# undef cpu_is_omap3525 -# undef cpu_is_omap3530 -# undef cpu_is_omap3505 -# undef cpu_is_omap3517 # undef cpu_is_ti81xx # undef cpu_is_ti816x # undef cpu_is_ti814x @@ -363,19 +347,6 @@ IS_OMAP_TYPE(3517, 0x3517) # undef cpu_is_am33xx # undef cpu_is_am335x # define cpu_is_omap3430() is_omap3430() -# define cpu_is_omap3503() (cpu_is_omap3430() && \ - (!omap3_has_iva()) && \ - (!omap3_has_sgx())) -# define cpu_is_omap3515() (cpu_is_omap3430() && \ - (!omap3_has_iva()) && \ - (omap3_has_sgx())) -# define cpu_is_omap3525() (cpu_is_omap3430() && \ - (!omap3_has_sgx()) && \ - (omap3_has_iva())) -# define cpu_is_omap3530() (cpu_is_omap3430()) -# define cpu_is_omap3517() is_omap3517() -# define cpu_is_omap3505() (cpu_is_omap3517() && \ - !omap3_has_sgx()) # undef cpu_is_omap3630 # define cpu_is_omap3630() is_omap363x() # define cpu_is_ti81xx() is_ti81xx() @@ -424,10 +395,6 @@ IS_OMAP_TYPE(3517, 0x3517) #define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (0x1 << 8)) #define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (0x2 << 8)) -#define OMAP3517_CLASS 0x35170034 -#define OMAP3517_REV_ES1_0 OMAP3517_CLASS -#define OMAP3517_REV_ES1_1 (OMAP3517_CLASS | (0x1 << 8)) - #define TI816X_CLASS 0x81600034 #define TI8168_REV_ES1_0 TI816X_CLASS #define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8)) diff --git a/arch/arm/plat-omap/include/plat/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h index a7754a8..5493bd9 100644 --- a/arch/arm/plat-omap/include/plat/mmc.h +++ b/arch/arm/plat-omap/include/plat/mmc.h @@ -172,8 +172,7 @@ struct omap_mmc_platform_data { extern void omap_mmc_notify_cover_event(struct device *dev, int slot, int is_closed); -#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \ - defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE) +#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, int nr_controllers); void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data); @@ -185,7 +184,6 @@ static inline void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data) { } - #endif extern int omap_msdi_reset(struct omap_hwmod *oh); diff --git a/arch/arm/plat-orion/common.c b/arch/arm/plat-orion/common.c index 61fd837..c179378 100644 --- a/arch/arm/plat-orion/common.c +++ b/arch/arm/plat-orion/common.c @@ -582,7 +582,7 @@ void __init orion_spi_1_init(unsigned long mapbase) * Watchdog ****************************************************************************/ static struct resource orion_wdt_resource = - DEFINE_RES_MEM(TIMER_VIRT_BASE, 0x28); + DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x28); static struct platform_device orion_wdt_device = { .name = "orion_wdt", diff --git a/arch/arm/plat-pxa/ssp.c b/arch/arm/plat-pxa/ssp.c index 58b7980..584c9bf 100644 --- a/arch/arm/plat-pxa/ssp.c +++ b/arch/arm/plat-pxa/ssp.c @@ -193,6 +193,7 @@ static const struct platform_device_id ssp_id_table[] = { { "pxa25x-nssp", PXA25x_NSSP }, { "pxa27x-ssp", PXA27x_SSP }, { "pxa168-ssp", PXA168_SSP }, + { "pxa910-ssp", PXA910_SSP }, { }, }; diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c index 33ecd0c..b1e05cc 100644 --- a/arch/arm/plat-samsung/adc.c +++ b/arch/arm/plat-samsung/adc.c @@ -157,11 +157,13 @@ int s3c_adc_start(struct s3c_adc_client *client, return -EINVAL; } - if (client->is_ts && adc->ts_pend) - return -EAGAIN; - spin_lock_irqsave(&adc->lock, flags); + if (client->is_ts && adc->ts_pend) { + spin_unlock_irqrestore(&adc->lock, flags); + return -EAGAIN; + } + client->channel = channel; client->nr_samples = nr_samples; diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 1d214cb..6303974 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -126,7 +126,8 @@ struct platform_device s3c_device_adc = { #ifdef CONFIG_CPU_S3C2440 static struct resource s3c_camif_resource[] = { [0] = DEFINE_RES_MEM(S3C2440_PA_CAMIF, S3C2440_SZ_CAMIF), - [1] = DEFINE_RES_IRQ(IRQ_CAM), + [1] = DEFINE_RES_IRQ(IRQ_S3C2440_CAM_C), + [2] = DEFINE_RES_IRQ(IRQ_S3C2440_CAM_P), }; struct platform_device s3c_device_camif = { diff --git a/arch/arm/plat-samsung/include/plat/map-s3c.h b/arch/arm/plat-samsung/include/plat/map-s3c.h index 7d04875..c0c70a8 100644 --- a/arch/arm/plat-samsung/include/plat/map-s3c.h +++ b/arch/arm/plat-samsung/include/plat/map-s3c.h @@ -22,7 +22,7 @@ #define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG #define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000) -#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00010000) +#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00100000) #define S3C2410_PA_UART (0x50000000) #define S3C24XX_PA_UART S3C2410_PA_UART diff --git a/arch/arm/plat-samsung/include/plat/watchdog-reset.h b/arch/arm/plat-samsung/include/plat/watchdog-reset.h index f19aff1..bc4db9b 100644 --- a/arch/arm/plat-samsung/include/plat/watchdog-reset.h +++ b/arch/arm/plat-samsung/include/plat/watchdog-reset.h @@ -25,7 +25,7 @@ static inline void arch_wdt_reset(void) __raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */ - if (s3c2410_wdtclk) + if (!IS_ERR(s3c2410_wdtclk)) clk_enable(s3c2410_wdtclk); /* put initial values into count and data */ diff --git a/arch/arm/plat-samsung/s5p-clock.c b/arch/arm/plat-samsung/s5p-clock.c index 031a618..48a1599 100644 --- a/arch/arm/plat-samsung/s5p-clock.c +++ b/arch/arm/plat-samsung/s5p-clock.c @@ -37,6 +37,7 @@ struct clk clk_ext_xtal_mux = { struct clk clk_xusbxti = { .name = "xusbxti", .id = -1, + .rate = 24000000, }; struct clk s5p_clk_27m = { diff --git a/arch/arm/plat-spear/include/plat/debug-macro.S b/arch/arm/plat-spear/include/plat/debug-macro.S index ab3de72..75b05ad 100644 --- a/arch/arm/plat-spear/include/plat/debug-macro.S +++ b/arch/arm/plat-spear/include/plat/debug-macro.S @@ -4,7 +4,7 @@ * Debugging macro include header for spear platform * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/plat-spear/include/plat/pl080.h b/arch/arm/plat-spear/include/plat/pl080.h index e14a3e4..2bc6b54 100644 --- a/arch/arm/plat-spear/include/plat/pl080.h +++ b/arch/arm/plat-spear/include/plat/pl080.h @@ -4,7 +4,7 @@ * DMAC pl080 definitions for SPEAr platform * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/plat-spear/include/plat/shirq.h b/arch/arm/plat-spear/include/plat/shirq.h index 03ed8b5..88a7fbd 100644 --- a/arch/arm/plat-spear/include/plat/shirq.h +++ b/arch/arm/plat-spear/include/plat/shirq.h @@ -4,7 +4,7 @@ * SPEAr platform shared irq layer header file * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/plat-spear/include/plat/timex.h b/arch/arm/plat-spear/include/plat/timex.h index 914d09d..ef95e5b 100644 --- a/arch/arm/plat-spear/include/plat/timex.h +++ b/arch/arm/plat-spear/include/plat/timex.h @@ -4,7 +4,7 @@ * SPEAr platform specific timex definitions * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/plat-spear/include/plat/uncompress.h b/arch/arm/plat-spear/include/plat/uncompress.h index 6dd455b..2ce6cb1 100644 --- a/arch/arm/plat-spear/include/plat/uncompress.h +++ b/arch/arm/plat-spear/include/plat/uncompress.h @@ -4,7 +4,7 @@ * Serial port stubs for kernel decompress status messages * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/plat-spear/pl080.c b/arch/arm/plat-spear/pl080.c index a56a067..12cf27f 100644 --- a/arch/arm/plat-spear/pl080.c +++ b/arch/arm/plat-spear/pl080.c @@ -4,7 +4,7 @@ * DMAC pl080 definitions for SPEAr platform * * Copyright (C) 2012 ST Microelectronics - * Viresh Kumar <viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/plat-spear/restart.c b/arch/arm/plat-spear/restart.c index ea0a613..4f99011 100644 --- a/arch/arm/plat-spear/restart.c +++ b/arch/arm/plat-spear/restart.c @@ -4,7 +4,7 @@ * SPEAr platform specific restart functions * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/arm/plat-spear/shirq.c b/arch/arm/plat-spear/shirq.c index 961fb72..853e891e 100644 --- a/arch/arm/plat-spear/shirq.c +++ b/arch/arm/plat-spear/shirq.c @@ -4,7 +4,7 @@ * SPEAr platform shared irq layer source file * * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> + * Viresh Kumar <viresh.linux@gmail.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any diff --git a/arch/h8300/include/asm/pgtable.h b/arch/h8300/include/asm/pgtable.h index a09230a..62ef176 100644 --- a/arch/h8300/include/asm/pgtable.h +++ b/arch/h8300/include/asm/pgtable.h @@ -70,4 +70,7 @@ extern int is_in_rom(unsigned long); #define VMALLOC_END 0xffffffff #define arch_enter_lazy_cpu_mode() do {} while (0) + +#include <asm-generic/pgtable.h> + #endif /* _H8300_PGTABLE_H */ diff --git a/arch/h8300/include/asm/uaccess.h b/arch/h8300/include/asm/uaccess.h index 356068c..8725d1a 100644 --- a/arch/h8300/include/asm/uaccess.h +++ b/arch/h8300/include/asm/uaccess.h @@ -100,7 +100,6 @@ extern int __put_user_bad(void); break; \ default: \ __gu_err = __get_user_bad(); \ - __gu_val = 0; \ break; \ } \ (x) = __gu_val; \ @@ -159,4 +158,6 @@ clear_user(void *to, unsigned long n) return 0; } +#define __clear_user clear_user + #endif /* _H8300_UACCESS_H */ diff --git a/arch/h8300/kernel/setup.c b/arch/h8300/kernel/setup.c index 68d6510..d0b1607 100644 --- a/arch/h8300/kernel/setup.c +++ b/arch/h8300/kernel/setup.c @@ -35,6 +35,7 @@ #include <asm/setup.h> #include <asm/irq.h> #include <asm/pgtable.h> +#include <asm/sections.h> #if defined(__H8300H__) #define CPU "H8/300H" @@ -54,7 +55,6 @@ unsigned long memory_end; char __initdata command_line[COMMAND_LINE_SIZE]; -extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end; extern int _ramstart, _ramend; extern char _target_name[]; extern void h8300_gpio_init(void); @@ -119,9 +119,9 @@ void __init setup_arch(char **cmdline_p) memory_end = CONFIG_BLKDEV_RESERVE_ADDRESS; #endif - init_mm.start_code = (unsigned long) &_stext; - init_mm.end_code = (unsigned long) &_etext; - init_mm.end_data = (unsigned long) &_edata; + init_mm.start_code = (unsigned long) _stext; + init_mm.end_code = (unsigned long) _etext; + init_mm.end_data = (unsigned long) _edata; init_mm.brk = (unsigned long) 0; #if (defined(CONFIG_H8300H_SIM) || defined(CONFIG_H8S_SIM)) && defined(CONFIG_GDB_MAGICPRINT) @@ -134,15 +134,12 @@ void __init setup_arch(char **cmdline_p) printk(KERN_INFO "H8/300 series support by Yoshinori Sato <ysato@users.sourceforge.jp>\n"); #ifdef DEBUG - printk(KERN_DEBUG "KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x " - "BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext, - (int) &_sdata, (int) &_edata, - (int) &_sbss, (int) &_ebss); - printk(KERN_DEBUG "KERNEL -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x " - "STACK=0x%06x-0x%06x\n", - (int) &_ebss, (int) memory_start, - (int) memory_start, (int) memory_end, - (int) memory_end, (int) &_ramend); + printk(KERN_DEBUG "KERNEL -> TEXT=0x%p-0x%p DATA=0x%p-0x%p " + "BSS=0x%p-0x%p\n", _stext, _etext, _sdata, _edata, __bss_start, + __bss_stop); + printk(KERN_DEBUG "KERNEL -> ROMFS=0x%p-0x%06lx MEM=0x%06lx-0x%06lx " + "STACK=0x%06lx-0x%p\n", __bss_stop, memory_start, memory_start, + memory_end, memory_end, &_ramend); #endif #ifdef CONFIG_DEFAULT_CMDLINE diff --git a/arch/h8300/kernel/signal.c b/arch/h8300/kernel/signal.c index fca1037..5adaada 100644 --- a/arch/h8300/kernel/signal.c +++ b/arch/h8300/kernel/signal.c @@ -447,7 +447,7 @@ handle_signal(unsigned long sig, siginfo_t *info, struct k_sigaction *ka, * want to handle. Thus you cannot kill init even with a SIGKILL even by * mistake. */ -statis void do_signal(struct pt_regs *regs) +static void do_signal(struct pt_regs *regs) { siginfo_t info; int signr; diff --git a/arch/h8300/kernel/time.c b/arch/h8300/kernel/time.c index 32263a1..e0f7419 100644 --- a/arch/h8300/kernel/time.c +++ b/arch/h8300/kernel/time.c @@ -27,6 +27,7 @@ #include <linux/profile.h> #include <asm/io.h> +#include <asm/irq_regs.h> #include <asm/timer.h> #define TICK_SIZE (tick_nsec / 1000) diff --git a/arch/h8300/mm/init.c b/arch/h8300/mm/init.c index 973369c..981e250 100644 --- a/arch/h8300/mm/init.c +++ b/arch/h8300/mm/init.c @@ -36,6 +36,7 @@ #include <asm/segment.h> #include <asm/page.h> #include <asm/pgtable.h> +#include <asm/sections.h> #undef DEBUG @@ -123,7 +124,6 @@ void __init mem_init(void) int codek = 0, datak = 0, initk = 0; /* DAVIDM look at setup memory map generically with reserved area */ unsigned long tmp; - extern char _etext, _stext, _sdata, _ebss, __init_begin, __init_end; extern unsigned long _ramend, _ramstart; unsigned long len = &_ramend - &_ramstart; unsigned long start_mem = memory_start; /* DAVIDM - these must start at end of kernel */ @@ -142,9 +142,9 @@ void __init mem_init(void) /* this will put all memory onto the freelists */ totalram_pages = free_all_bootmem(); - codek = (&_etext - &_stext) >> 10; - datak = (&_ebss - &_sdata) >> 10; - initk = (&__init_begin - &__init_end) >> 10; + codek = (_etext - _stext) >> 10; + datak = (__bss_stop - _sdata) >> 10; + initk = (__init_begin - __init_end) >> 10; tmp = nr_free_pages() << PAGE_SHIFT; printk(KERN_INFO "Memory available: %luk/%luk RAM, %luk/%luk ROM (%dk kernel code, %dk data)\n", @@ -178,22 +178,21 @@ free_initmem(void) { #ifdef CONFIG_RAMKERNEL unsigned long addr; - extern char __init_begin, __init_end; /* * the following code should be cool even if these sections * are not page aligned. */ - addr = PAGE_ALIGN((unsigned long)(&__init_begin)); + addr = PAGE_ALIGN((unsigned long)(__init_begin)); /* next to check that the page we free is not a partial page */ - for (; addr + PAGE_SIZE < (unsigned long)(&__init_end); addr +=PAGE_SIZE) { + for (; addr + PAGE_SIZE < (unsigned long)__init_end; addr +=PAGE_SIZE) { ClearPageReserved(virt_to_page(addr)); init_page_count(virt_to_page(addr)); free_page(addr); totalram_pages++; } printk(KERN_INFO "Freeing unused kernel memory: %ldk freed (0x%x - 0x%x)\n", - (addr - PAGE_ALIGN((long) &__init_begin)) >> 10, - (int)(PAGE_ALIGN((unsigned long)(&__init_begin))), + (addr - PAGE_ALIGN((long) __init_begin)) >> 10, + (int)(PAGE_ALIGN((unsigned long)__init_begin)), (int)(addr - PAGE_SIZE)); #endif } diff --git a/arch/m32r/boot/compressed/Makefile b/arch/m32r/boot/compressed/Makefile index 177716b..01729c2 100644 --- a/arch/m32r/boot/compressed/Makefile +++ b/arch/m32r/boot/compressed/Makefile @@ -43,9 +43,9 @@ endif OBJCOPYFLAGS += -R .empty_zero_page -suffix_$(CONFIG_KERNEL_GZIP) = gz -suffix_$(CONFIG_KERNEL_BZIP2) = bz2 -suffix_$(CONFIG_KERNEL_LZMA) = lzma +suffix-$(CONFIG_KERNEL_GZIP) = gz +suffix-$(CONFIG_KERNEL_BZIP2) = bz2 +suffix-$(CONFIG_KERNEL_LZMA) = lzma $(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix-y) FORCE $(call if_changed,ld) diff --git a/arch/m32r/boot/compressed/misc.c b/arch/m32r/boot/compressed/misc.c index 370d608..28a0952 100644 --- a/arch/m32r/boot/compressed/misc.c +++ b/arch/m32r/boot/compressed/misc.c @@ -28,7 +28,7 @@ static unsigned long free_mem_ptr; static unsigned long free_mem_end_ptr; #ifdef CONFIG_KERNEL_BZIP2 -static void *memset(void *s, int c, size_t n) +void *memset(void *s, int c, size_t n) { char *ss = s; @@ -39,6 +39,16 @@ static void *memset(void *s, int c, size_t n) #endif #ifdef CONFIG_KERNEL_GZIP +void *memcpy(void *dest, const void *src, size_t n) +{ + char *d = dest; + const char *s = src; + while (n--) + *d++ = *s++; + + return dest; +} + #define BOOT_HEAP_SIZE 0x10000 #include "../../../../lib/decompress_inflate.c" #endif diff --git a/arch/m32r/include/asm/ptrace.h b/arch/m32r/include/asm/ptrace.h index 5275275..4313aa6 100644 --- a/arch/m32r/include/asm/ptrace.h +++ b/arch/m32r/include/asm/ptrace.h @@ -113,9 +113,6 @@ struct pt_regs { #define PTRACE_OLDSETOPTIONS 21 -/* options set using PTRACE_SETOPTIONS */ -#define PTRACE_O_TRACESYSGOOD 0x00000001 - #ifdef __KERNEL__ #include <asm/m32r.h> /* M32R_PSW_BSM, M32R_PSW_BPM */ diff --git a/arch/m32r/kernel/ptrace.c b/arch/m32r/kernel/ptrace.c index 4c03361..51f5e9a 100644 --- a/arch/m32r/kernel/ptrace.c +++ b/arch/m32r/kernel/ptrace.c @@ -591,17 +591,16 @@ void user_enable_single_step(struct task_struct *child) if (access_process_vm(child, pc&~3, &insn, sizeof(insn), 0) != sizeof(insn)) - return -EIO; + return; compute_next_pc(insn, pc, &next_pc, child); if (next_pc & 0x80000000) - return -EIO; + return; if (embed_debug_trap(child, next_pc)) - return -EIO; + return; invalidate_cache(); - return 0; } void user_disable_single_step(struct task_struct *child) diff --git a/arch/m32r/kernel/signal.c b/arch/m32r/kernel/signal.c index f3fb2c0..d0f60b9 100644 --- a/arch/m32r/kernel/signal.c +++ b/arch/m32r/kernel/signal.c @@ -286,7 +286,7 @@ handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info, case -ERESTARTNOINTR: regs->r0 = regs->orig_r0; if (prev_insn(regs) < 0) - return -EFAULT; + return; } } diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig index cac5b6b..1471201 100644 --- a/arch/m68k/Kconfig +++ b/arch/m68k/Kconfig @@ -7,6 +7,8 @@ config M68K select GENERIC_IRQ_SHOW select ARCH_HAVE_NMI_SAFE_CMPXCHG if RMW_INSNS select GENERIC_CPU_DEVICES + select GENERIC_STRNCPY_FROM_USER if MMU + select GENERIC_STRNLEN_USER if MMU select FPU if MMU select ARCH_USES_GETTIMEOFFSET if MMU && !COLDFIRE diff --git a/arch/m68k/include/asm/Kbuild b/arch/m68k/include/asm/Kbuild index 1a922fa..eafa253 100644 --- a/arch/m68k/include/asm/Kbuild +++ b/arch/m68k/include/asm/Kbuild @@ -1,2 +1,4 @@ include include/asm-generic/Kbuild.asm header-y += cachectl.h + +generic-y += word-at-a-time.h diff --git a/arch/m68k/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h index d63b99f..497c31c 100644 --- a/arch/m68k/include/asm/m528xsim.h +++ b/arch/m68k/include/asm/m528xsim.h @@ -86,7 +86,7 @@ /* * QSPI module. */ -#define MCFQSPI_IOBASE (MCF_IPSBAR + 0x340) +#define MCFQSPI_BASE (MCF_IPSBAR + 0x340) #define MCFQSPI_SIZE 0x40 #define MCFQSPI_CS0 147 diff --git a/arch/m68k/include/asm/uaccess_mm.h b/arch/m68k/include/asm/uaccess_mm.h index 9c80cd5..472c891 100644 --- a/arch/m68k/include/asm/uaccess_mm.h +++ b/arch/m68k/include/asm/uaccess_mm.h @@ -379,12 +379,15 @@ __constant_copy_to_user(void __user *to, const void *from, unsigned long n) #define copy_from_user(to, from, n) __copy_from_user(to, from, n) #define copy_to_user(to, from, n) __copy_to_user(to, from, n) -long strncpy_from_user(char *dst, const char __user *src, long count); -long strnlen_user(const char __user *src, long n); +#define user_addr_max() \ + (segment_eq(get_fs(), USER_DS) ? TASK_SIZE : ~0UL) + +extern long strncpy_from_user(char *dst, const char __user *src, long count); +extern __must_check long strlen_user(const char __user *str); +extern __must_check long strnlen_user(const char __user *str, long n); + unsigned long __clear_user(void __user *to, unsigned long n); #define clear_user __clear_user -#define strlen_user(str) strnlen_user(str, 32767) - #endif /* _M68K_UACCESS_H */ diff --git a/arch/m68k/kernel/ptrace.c b/arch/m68k/kernel/ptrace.c index 8b4a222..1bc10e6 100644 --- a/arch/m68k/kernel/ptrace.c +++ b/arch/m68k/kernel/ptrace.c @@ -286,7 +286,7 @@ asmlinkage void syscall_trace(void) } } -#ifdef CONFIG_COLDFIRE +#if defined(CONFIG_COLDFIRE) || !defined(CONFIG_MMU) asmlinkage int syscall_trace_enter(void) { int ret = 0; diff --git a/arch/m68k/kernel/time.c b/arch/m68k/kernel/time.c index d7deb7f..707f057 100644 --- a/arch/m68k/kernel/time.c +++ b/arch/m68k/kernel/time.c @@ -85,7 +85,7 @@ void __init time_init(void) mach_sched_init(timer_interrupt); } -#ifdef CONFIG_M68KCLASSIC +#ifdef CONFIG_ARCH_USES_GETTIMEOFFSET u32 arch_gettimeoffset(void) { @@ -108,4 +108,4 @@ static int __init rtc_init(void) module_init(rtc_init); -#endif /* CONFIG_M68KCLASSIC */ +#endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */ diff --git a/arch/m68k/lib/uaccess.c b/arch/m68k/lib/uaccess.c index 5664386..5e97f2e 100644 --- a/arch/m68k/lib/uaccess.c +++ b/arch/m68k/lib/uaccess.c @@ -104,80 +104,6 @@ unsigned long __generic_copy_to_user(void __user *to, const void *from, EXPORT_SYMBOL(__generic_copy_to_user); /* - * Copy a null terminated string from userspace. - */ -long strncpy_from_user(char *dst, const char __user *src, long count) -{ - long res; - char c; - - if (count <= 0) - return count; - - asm volatile ("\n" - "1: "MOVES".b (%2)+,%4\n" - " move.b %4,(%1)+\n" - " jeq 2f\n" - " subq.l #1,%3\n" - " jne 1b\n" - "2: sub.l %3,%0\n" - "3:\n" - " .section .fixup,\"ax\"\n" - " .even\n" - "10: move.l %5,%0\n" - " jra 3b\n" - " .previous\n" - "\n" - " .section __ex_table,\"a\"\n" - " .align 4\n" - " .long 1b,10b\n" - " .previous" - : "=d" (res), "+a" (dst), "+a" (src), "+r" (count), "=&d" (c) - : "i" (-EFAULT), "0" (count)); - - return res; -} -EXPORT_SYMBOL(strncpy_from_user); - -/* - * Return the size of a string (including the ending 0) - * - * Return 0 on exception, a value greater than N if too long - */ -long strnlen_user(const char __user *src, long n) -{ - char c; - long res; - - asm volatile ("\n" - "1: subq.l #1,%1\n" - " jmi 3f\n" - "2: "MOVES".b (%0)+,%2\n" - " tst.b %2\n" - " jne 1b\n" - " jra 4f\n" - "\n" - "3: addq.l #1,%0\n" - "4: sub.l %4,%0\n" - "5:\n" - " .section .fixup,\"ax\"\n" - " .even\n" - "20: sub.l %0,%0\n" - " jra 5b\n" - " .previous\n" - "\n" - " .section __ex_table,\"a\"\n" - " .align 4\n" - " .long 2b,20b\n" - " .previous\n" - : "=&a" (res), "+d" (n), "=&d" (c) - : "0" (src), "r" (src)); - - return res; -} -EXPORT_SYMBOL(strnlen_user); - -/* * Zero Userspace */ diff --git a/arch/m68k/platform/68328/timers.c b/arch/m68k/platform/68328/timers.c index c801c17..f4dc9b2 100644 --- a/arch/m68k/platform/68328/timers.c +++ b/arch/m68k/platform/68328/timers.c @@ -53,6 +53,7 @@ #endif static u32 m68328_tick_cnt; +static irq_handler_t timer_interrupt; /***************************************************************************/ @@ -62,7 +63,7 @@ static irqreturn_t hw_tick(int irq, void *dummy) TSTAT &= 0; m68328_tick_cnt += TICKS_PER_JIFFY; - return arch_timer_interrupt(irq, dummy); + return timer_interrupt(irq, dummy); } /***************************************************************************/ @@ -99,7 +100,7 @@ static struct clocksource m68328_clk = { /***************************************************************************/ -void hw_timer_init(void) +void hw_timer_init(irq_handler_t handler) { /* disable timer 1 */ TCTL = 0; @@ -115,6 +116,7 @@ void hw_timer_init(void) /* Enable timer 1 */ TCTL |= TCTL_TEN; clocksource_register_hz(&m68328_clk, TICKS_PER_JIFFY*HZ); + timer_interrupt = handler; } /***************************************************************************/ diff --git a/arch/m68k/platform/68360/config.c b/arch/m68k/platform/68360/config.c index 255fc03..9877cef 100644 --- a/arch/m68k/platform/68360/config.c +++ b/arch/m68k/platform/68360/config.c @@ -35,6 +35,7 @@ extern void m360_cpm_reset(void); #define OSCILLATOR (unsigned long int)33000000 #endif +static irq_handler_t timer_interrupt; unsigned long int system_clock; extern QUICC *pquicc; @@ -52,7 +53,7 @@ static irqreturn_t hw_tick(int irq, void *dummy) pquicc->timer_ter1 = 0x0002; /* clear timer event */ - return arch_timer_interrupt(irq, dummy); + return timer_interrupt(irq, dummy); } static struct irqaction m68360_timer_irq = { @@ -61,7 +62,7 @@ static struct irqaction m68360_timer_irq = { .handler = hw_tick, }; -void hw_timer_init(void) +void hw_timer_init(irq_handler_t handler) { unsigned char prescaler; unsigned short tgcr_save; @@ -94,6 +95,8 @@ void hw_timer_init(void) pquicc->timer_ter1 = 0x0003; /* clear timer events */ + timer_interrupt = handler; + /* enable timer 1 interrupt in CIMR */ setup_irq(CPMVEC_TIMER1, &m68360_timer_irq); diff --git a/arch/m68k/platform/coldfire/clk.c b/arch/m68k/platform/coldfire/clk.c index 9f1260c..44da406 100644 --- a/arch/m68k/platform/coldfire/clk.c +++ b/arch/m68k/platform/coldfire/clk.c @@ -42,4 +42,11 @@ unsigned long clk_get_rate(struct clk *clk) return MCF_CLK; } EXPORT_SYMBOL(clk_get_rate); + +struct clk *devm_clk_get(struct device *dev, const char *id) +{ + return NULL; +} +EXPORT_SYMBOL(devm_clk_get); + /***************************************************************************/ diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 09ab87e..b3e10fd 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -288,6 +288,7 @@ config MIPS_MALTA select SYS_HAS_CPU_MIPS32_R1 select SYS_HAS_CPU_MIPS32_R2 select SYS_HAS_CPU_MIPS64_R1 + select SYS_HAS_CPU_MIPS64_R2 select SYS_HAS_CPU_NEVADA select SYS_HAS_CPU_RM7000 select SYS_HAS_EARLY_PRINTK @@ -1423,6 +1424,7 @@ config CPU_SB1 config CPU_CAVIUM_OCTEON bool "Cavium Octeon processor" depends on SYS_HAS_CPU_CAVIUM_OCTEON + select ARCH_SPARSEMEM_ENABLE select CPU_HAS_PREFETCH select CPU_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_SMP diff --git a/arch/mips/bcm47xx/Kconfig b/arch/mips/bcm47xx/Kconfig index 6210b8d..b311be4 100644 --- a/arch/mips/bcm47xx/Kconfig +++ b/arch/mips/bcm47xx/Kconfig @@ -21,6 +21,7 @@ config BCM47XX_BCMA select BCMA select BCMA_HOST_SOC select BCMA_DRIVER_MIPS + select BCMA_HOST_PCI if PCI select BCMA_DRIVER_PCI_HOSTMODE if PCI default y help diff --git a/arch/mips/bcm63xx/dev-pcmcia.c b/arch/mips/bcm63xx/dev-pcmcia.c index de4d917..a551bab 100644 --- a/arch/mips/bcm63xx/dev-pcmcia.c +++ b/arch/mips/bcm63xx/dev-pcmcia.c @@ -79,11 +79,11 @@ static int __init config_pcmcia_cs(unsigned int cs, return ret; } -static const __initdata struct { +static const struct { unsigned int cs; unsigned int base; unsigned int size; -} pcmcia_cs[3] = { +} pcmcia_cs[3] __initconst = { { .cs = MPI_CS_PCMCIA_COMMON, .base = BCM_PCMCIA_COMMON_BASE_PA, diff --git a/arch/mips/cavium-octeon/Kconfig b/arch/mips/cavium-octeon/Kconfig index f9e275a..2f4f6d5 100644 --- a/arch/mips/cavium-octeon/Kconfig +++ b/arch/mips/cavium-octeon/Kconfig @@ -82,10 +82,6 @@ config CAVIUM_OCTEON_LOCK_L2_MEMCPY help Lock the kernel's implementation of memcpy() into L2. -config ARCH_SPARSEMEM_ENABLE - def_bool y - select SPARSEMEM_STATIC - config IOMMU_HELPER bool diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c index 4b93048..ee1fb9f 100644 --- a/arch/mips/cavium-octeon/smp.c +++ b/arch/mips/cavium-octeon/smp.c @@ -185,7 +185,6 @@ static void __cpuinit octeon_init_secondary(void) octeon_init_cvmcount(); octeon_irq_setup_secondary(); - raw_local_irq_enable(); } /** @@ -233,6 +232,7 @@ static void octeon_smp_finish(void) /* to generate the first CPU timer interrupt */ write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ); + local_irq_enable(); } /** diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h index 2e1ad4c..82ad35c 100644 --- a/arch/mips/include/asm/bitops.h +++ b/arch/mips/include/asm/bitops.h @@ -17,7 +17,6 @@ #include <linux/irqflags.h> #include <linux/types.h> #include <asm/barrier.h> -#include <asm/bug.h> #include <asm/byteorder.h> /* sigh ... */ #include <asm/cpu-features.h> #include <asm/sgidefs.h> diff --git a/arch/mips/include/asm/cmpxchg.h b/arch/mips/include/asm/cmpxchg.h index 285a41f..eee10dc 100644 --- a/arch/mips/include/asm/cmpxchg.h +++ b/arch/mips/include/asm/cmpxchg.h @@ -8,6 +8,7 @@ #ifndef __ASM_CMPXCHG_H #define __ASM_CMPXCHG_H +#include <linux/bug.h> #include <linux/irqflags.h> #include <asm/war.h> diff --git a/arch/mips/include/asm/cpu.h b/arch/mips/include/asm/cpu.h index f9fa2a4..95e40c1 100644 --- a/arch/mips/include/asm/cpu.h +++ b/arch/mips/include/asm/cpu.h @@ -94,6 +94,7 @@ #define PRID_IMP_24KE 0x9600 #define PRID_IMP_74K 0x9700 #define PRID_IMP_1004K 0x9900 +#define PRID_IMP_M14KC 0x9c00 /* * These are the PRID's for when 23:16 == PRID_COMP_SIBYTE @@ -260,12 +261,12 @@ enum cpu_type_enum { */ CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_1004K, CPU_74K, CPU_ALCHEMY, CPU_PR4450, CPU_BMIPS32, CPU_BMIPS3300, CPU_BMIPS4350, - CPU_BMIPS4380, CPU_BMIPS5000, CPU_JZRISC, + CPU_BMIPS4380, CPU_BMIPS5000, CPU_JZRISC, CPU_M14KC, /* * MIPS64 class processors */ - CPU_5KC, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2, + CPU_5KC, CPU_5KE, CPU_20KC, CPU_25KF, CPU_SB1, CPU_SB1A, CPU_LOONGSON2, CPU_CAVIUM_OCTEON, CPU_CAVIUM_OCTEON_PLUS, CPU_CAVIUM_OCTEON2, CPU_XLR, CPU_XLP, @@ -288,7 +289,7 @@ enum cpu_type_enum { #define MIPS_CPU_ISA_M64R2 0x00000100 #define MIPS_CPU_ISA_32BIT (MIPS_CPU_ISA_I | MIPS_CPU_ISA_II | \ - MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 ) + MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2) #define MIPS_CPU_ISA_64BIT (MIPS_CPU_ISA_III | MIPS_CPU_ISA_IV | \ MIPS_CPU_ISA_V | MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2) diff --git a/arch/mips/include/asm/gic.h b/arch/mips/include/asm/gic.h index 86548da..991b659 100644 --- a/arch/mips/include/asm/gic.h +++ b/arch/mips/include/asm/gic.h @@ -206,7 +206,7 @@ #define GIC_VPE_EIC_SHADOW_SET_BASE 0x0100 #define GIC_VPE_EIC_SS(intr) \ - (GIC_EIC_SHADOW_SET_BASE + (4 * intr)) + (GIC_VPE_EIC_SHADOW_SET_BASE + (4 * intr)) #define GIC_VPE_EIC_VEC_BASE 0x0800 #define GIC_VPE_EIC_VEC(intr) \ @@ -330,6 +330,17 @@ struct gic_intr_map { #define GIC_FLAG_TRANSPARENT 0x02 }; +/* + * This is only used in EIC mode. This helps to figure out which + * shared interrupts we need to process when we get a vector interrupt. + */ +#define GIC_MAX_SHARED_INTR 0x5 +struct gic_shared_intr_map { + unsigned int num_shared_intr; + unsigned int intr_list[GIC_MAX_SHARED_INTR]; + unsigned int local_intr_mask; +}; + extern void gic_init(unsigned long gic_base_addr, unsigned long gic_addrspace_size, struct gic_intr_map *intrmap, unsigned int intrmap_size, unsigned int irqbase); @@ -338,5 +349,7 @@ extern unsigned int gic_get_int(void); extern void gic_send_ipi(unsigned int intr); extern unsigned int plat_ipi_call_int_xlate(unsigned int); extern unsigned int plat_ipi_resched_int_xlate(unsigned int); +extern void gic_bind_eic_interrupt(int irq, int set); +extern unsigned int gic_get_timer_pending(void); #endif /* _ASM_GICREGS_H */ diff --git a/arch/mips/include/asm/inst.h b/arch/mips/include/asm/inst.h index 7ebfc39..ab84064 100644 --- a/arch/mips/include/asm/inst.h +++ b/arch/mips/include/asm/inst.h @@ -251,7 +251,7 @@ struct f_format { /* FPU register format */ unsigned int func : 6; }; -struct ma_format { /* FPU multipy and add format (MIPS IV) */ +struct ma_format { /* FPU multiply and add format (MIPS IV) */ unsigned int opcode : 6; unsigned int fr : 5; unsigned int ft : 5; @@ -324,7 +324,7 @@ struct f_format { /* FPU register format */ unsigned int opcode : 6; }; -struct ma_format { /* FPU multipy and add format (MIPS IV) */ +struct ma_format { /* FPU multiply and add format (MIPS IV) */ unsigned int fmt : 2; unsigned int func : 4; unsigned int fd : 5; diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h index a58f229..29d9c23 100644 --- a/arch/mips/include/asm/io.h +++ b/arch/mips/include/asm/io.h @@ -17,6 +17,7 @@ #include <linux/types.h> #include <asm/addrspace.h> +#include <asm/bug.h> #include <asm/byteorder.h> #include <asm/cpu.h> #include <asm/cpu-features.h> diff --git a/arch/mips/include/asm/irq.h b/arch/mips/include/asm/irq.h index fb698dc..78dbb8a 100644 --- a/arch/mips/include/asm/irq.h +++ b/arch/mips/include/asm/irq.h @@ -136,6 +136,7 @@ extern void free_irqno(unsigned int irq); * IE7. Since R2 their number has to be read from the c0_intctl register. */ #define CP0_LEGACY_COMPARE_IRQ 7 +#define CP0_LEGACY_PERFCNT_IRQ 7 extern int cp0_compare_irq; extern int cp0_compare_irq_shift; diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h index 94d4faa..fdcd78c 100644 --- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h +++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_regs.h @@ -99,7 +99,7 @@ #define CKCTL_6368_USBH_CLK_EN (1 << 15) #define CKCTL_6368_DISABLE_GLESS_EN (1 << 16) #define CKCTL_6368_NAND_CLK_EN (1 << 17) -#define CKCTL_6368_IPSEC_CLK_EN (1 << 17) +#define CKCTL_6368_IPSEC_CLK_EN (1 << 18) #define CKCTL_6368_ALL_SAFE_EN (CKCTL_6368_SWPKT_USB_EN | \ CKCTL_6368_SWPKT_SAR_EN | \ diff --git a/arch/mips/include/asm/mips-boards/maltaint.h b/arch/mips/include/asm/mips-boards/maltaint.h index d11aa02..5447d9f 100644 --- a/arch/mips/include/asm/mips-boards/maltaint.h +++ b/arch/mips/include/asm/mips-boards/maltaint.h @@ -86,6 +86,16 @@ #define GIC_CPU_INT4 4 /* . */ #define GIC_CPU_INT5 5 /* Core Interrupt 5 */ +/* MALTA GIC local interrupts */ +#define GIC_INT_TMR (GIC_CPU_INT5) +#define GIC_INT_PERFCTR (GIC_CPU_INT5) + +/* GIC constants */ +/* Add 2 to convert non-eic hw int # to eic vector # */ +#define GIC_CPU_TO_VEC_OFFSET (2) +/* If we map an intr to pin X, GIC will actually generate vector X+1 */ +#define GIC_PIN_TO_VEC_OFFSET (1) + #define GIC_EXT_INTR(x) x /* External Interrupts used for IPI */ diff --git a/arch/mips/include/asm/mipsmtregs.h b/arch/mips/include/asm/mipsmtregs.h index c9420aa..e71ff4c 100644 --- a/arch/mips/include/asm/mipsmtregs.h +++ b/arch/mips/include/asm/mipsmtregs.h @@ -48,7 +48,7 @@ #define CP0_VPECONF0 $1, 2 #define CP0_VPECONF1 $1, 3 #define CP0_YQMASK $1, 4 -#define CP0_VPESCHEDULE $1, 5 +#define CP0_VPESCHEDULE $1, 5 #define CP0_VPESCHEFBK $1, 6 #define CP0_TCSTATUS $2, 1 #define CP0_TCBIND $2, 2 diff --git a/arch/mips/include/asm/switch_to.h b/arch/mips/include/asm/switch_to.h index 5d33621..4f8ddba8 100644 --- a/arch/mips/include/asm/switch_to.h +++ b/arch/mips/include/asm/switch_to.h @@ -22,7 +22,7 @@ struct task_struct; * switch_to(n) should switch tasks to task nr n, first * checking that n isn't the current task, in which case it does nothing. */ -extern asmlinkage void *resume(void *last, void *next, void *next_ti); +extern asmlinkage void *resume(void *last, void *next, void *next_ti, u32 __usedfpu); extern unsigned int ll_bit; extern struct task_struct *ll_task; @@ -66,11 +66,13 @@ do { \ #define switch_to(prev, next, last) \ do { \ + u32 __usedfpu; \ __mips_mt_fpaff_switch_to(prev); \ if (cpu_has_dsp) \ __save_dsp(prev); \ __clear_software_ll_bit(); \ - (last) = resume(prev, next, task_thread_info(next)); \ + __usedfpu = test_and_clear_tsk_thread_flag(prev, TIF_USEDFPU); \ + (last) = resume(prev, next, task_thread_info(next), __usedfpu); \ } while (0) #define finish_arch_switch(prev) \ diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h index e2eca7d..ca97e0e 100644 --- a/arch/mips/include/asm/thread_info.h +++ b/arch/mips/include/asm/thread_info.h @@ -60,6 +60,8 @@ struct thread_info { register struct thread_info *__current_thread_info __asm__("$28"); #define current_thread_info() __current_thread_info +#endif /* !__ASSEMBLY__ */ + /* thread information allocation */ #if defined(CONFIG_PAGE_SIZE_4KB) && defined(CONFIG_32BIT) #define THREAD_SIZE_ORDER (1) @@ -85,8 +87,6 @@ register struct thread_info *__current_thread_info __asm__("$28"); #define STACK_WARN (THREAD_SIZE / 8) -#endif /* !__ASSEMBLY__ */ - #define PREEMPT_ACTIVE 0x10000000 /* diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index 6ae7ce4..f4630e1 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -4,7 +4,7 @@ * Copyright (C) xxxx the Anonymous * Copyright (C) 1994 - 2006 Ralf Baechle * Copyright (C) 2003, 2004 Maciej W. Rozycki - * Copyright (C) 2001, 2004 MIPS Inc. + * Copyright (C) 2001, 2004, 2011, 2012 MIPS Technologies, Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -199,6 +199,7 @@ void __init check_wait(void) cpu_wait = rm7k_wait_irqoff; break; + case CPU_M14KC: case CPU_24K: case CPU_34K: case CPU_1004K: @@ -810,6 +811,10 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu) c->cputype = CPU_5KC; __cpu_name[cpu] = "MIPS 5Kc"; break; + case PRID_IMP_5KE: + c->cputype = CPU_5KE; + __cpu_name[cpu] = "MIPS 5KE"; + break; case PRID_IMP_20KC: c->cputype = CPU_20KC; __cpu_name[cpu] = "MIPS 20Kc"; @@ -831,6 +836,10 @@ static inline void cpu_probe_mips(struct cpuinfo_mips *c, unsigned int cpu) c->cputype = CPU_74K; __cpu_name[cpu] = "MIPS 74Kc"; break; + case PRID_IMP_M14KC: + c->cputype = CPU_M14KC; + __cpu_name[cpu] = "MIPS M14Kc"; + break; case PRID_IMP_1004K: c->cputype = CPU_1004K; __cpu_name[cpu] = "MIPS 1004Kc"; diff --git a/arch/mips/kernel/mips_ksyms.c b/arch/mips/kernel/mips_ksyms.c index 57ba13e..3fc1691 100644 --- a/arch/mips/kernel/mips_ksyms.c +++ b/arch/mips/kernel/mips_ksyms.c @@ -5,7 +5,7 @@ * License. See the file "COPYING" in the main directory of this archive * for more details. * - * Copyright (C) 1996, 97, 98, 99, 2000, 01, 03, 04, 05 by Ralf Baechle + * Copyright (C) 1996, 97, 98, 99, 2000, 01, 03, 04, 05, 12 by Ralf Baechle * Copyright (C) 1999, 2000, 01 Silicon Graphics, Inc. */ #include <linux/interrupt.h> @@ -35,6 +35,12 @@ EXPORT_SYMBOL(memmove); EXPORT_SYMBOL(kernel_thread); /* + * Functions that operate on entire pages. Mostly used by memory management. + */ +EXPORT_SYMBOL(clear_page); +EXPORT_SYMBOL(copy_page); + +/* * Userspace access stuff. */ EXPORT_SYMBOL(__copy_user); diff --git a/arch/mips/kernel/octeon_switch.S b/arch/mips/kernel/octeon_switch.S index ce89c80..0441f54 100644 --- a/arch/mips/kernel/octeon_switch.S +++ b/arch/mips/kernel/octeon_switch.S @@ -31,7 +31,7 @@ /* * task_struct *resume(task_struct *prev, task_struct *next, - * struct thread_info *next_ti) + * struct thread_info *next_ti, int usedfpu) */ .align 7 LEAF(resume) diff --git a/arch/mips/kernel/perf_event_mipsxx.c b/arch/mips/kernel/perf_event_mipsxx.c index f29099b..eb5e394 100644 --- a/arch/mips/kernel/perf_event_mipsxx.c +++ b/arch/mips/kernel/perf_event_mipsxx.c @@ -162,11 +162,6 @@ static unsigned int counters_total_to_per_cpu(unsigned int counters) return counters >> vpe_shift(); } -static unsigned int counters_per_cpu_to_total(unsigned int counters) -{ - return counters << vpe_shift(); -} - #else /* !CONFIG_MIPS_MT_SMP */ #define vpe_id() 0 diff --git a/arch/mips/kernel/r2300_switch.S b/arch/mips/kernel/r2300_switch.S index 2938983..9c51be5 100644 --- a/arch/mips/kernel/r2300_switch.S +++ b/arch/mips/kernel/r2300_switch.S @@ -43,7 +43,7 @@ /* * task_struct *resume(task_struct *prev, task_struct *next, - * struct thread_info *next_ti) ) + * struct thread_info *next_ti, int usedfpu) */ LEAF(resume) mfc0 t1, CP0_STATUS @@ -51,18 +51,9 @@ LEAF(resume) cpu_save_nonscratch a0 sw ra, THREAD_REG31(a0) - /* - * check if we need to save FPU registers - */ - lw t3, TASK_THREAD_INFO(a0) - lw t0, TI_FLAGS(t3) - li t1, _TIF_USEDFPU - and t2, t0, t1 - beqz t2, 1f - nor t1, zero, t1 + beqz a3, 1f - and t0, t0, t1 - sw t0, TI_FLAGS(t3) + PTR_L t3, TASK_THREAD_INFO(a0) /* * clear saved user stack CU1 bit diff --git a/arch/mips/kernel/r4k_switch.S b/arch/mips/kernel/r4k_switch.S index 9414f93..42d2a39 100644 --- a/arch/mips/kernel/r4k_switch.S +++ b/arch/mips/kernel/r4k_switch.S @@ -41,7 +41,7 @@ /* * task_struct *resume(task_struct *prev, task_struct *next, - * struct thread_info *next_ti) + * struct thread_info *next_ti, int usedfpu) */ .align 5 LEAF(resume) @@ -53,16 +53,10 @@ /* * check if we need to save FPU registers */ - PTR_L t3, TASK_THREAD_INFO(a0) - LONG_L t0, TI_FLAGS(t3) - li t1, _TIF_USEDFPU - and t2, t0, t1 - beqz t2, 1f - nor t1, zero, t1 - and t0, t0, t1 - LONG_S t0, TI_FLAGS(t3) + beqz a3, 1f + PTR_L t3, TASK_THREAD_INFO(a0) /* * clear saved user stack CU1 bit */ diff --git a/arch/mips/kernel/smp-bmips.c b/arch/mips/kernel/smp-bmips.c index 3046e29..8e393b8 100644 --- a/arch/mips/kernel/smp-bmips.c +++ b/arch/mips/kernel/smp-bmips.c @@ -15,7 +15,6 @@ #include <linux/smp.h> #include <linux/interrupt.h> #include <linux/spinlock.h> -#include <linux/init.h> #include <linux/cpu.h> #include <linux/cpumask.h> #include <linux/reboot.h> @@ -197,13 +196,6 @@ static void bmips_init_secondary(void) write_c0_brcm_action(ACTION_CLR_IPI(smp_processor_id(), 0)); #endif - - /* make sure there won't be a timer interrupt for a little while */ - write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ); - - irq_enable_hazard(); - set_c0_status(IE_SW0 | IE_SW1 | IE_IRQ1 | IE_IRQ5 | ST0_IE); - irq_enable_hazard(); } /* @@ -212,6 +204,13 @@ static void bmips_init_secondary(void) static void bmips_smp_finish(void) { pr_info("SMP: CPU%d is running\n", smp_processor_id()); + + /* make sure there won't be a timer interrupt for a little while */ + write_c0_compare(read_c0_count() + mips_hpt_frequency / HZ); + + irq_enable_hazard(); + set_c0_status(IE_SW0 | IE_SW1 | IE_IRQ1 | IE_IRQ5 | ST0_IE); + irq_enable_hazard(); } /* diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 48650c8..1268392 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -122,13 +122,21 @@ asmlinkage __cpuinit void start_secondary(void) notify_cpu_starting(cpu); - mp_ops->smp_finish(); + set_cpu_online(cpu, true); + set_cpu_sibling_map(cpu); cpu_set(cpu, cpu_callin_map); synchronise_count_slave(); + /* + * irq will be enabled in ->smp_finish(), enabling it too early + * is dangerous. + */ + WARN_ON_ONCE(!irqs_disabled()); + mp_ops->smp_finish(); + cpu_idle(); } @@ -196,8 +204,6 @@ int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *tidle) while (!cpu_isset(cpu, cpu_callin_map)) udelay(100); - set_cpu_online(cpu, true); - return 0; } diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index f5dd38f..15b5f3c 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -322,7 +322,7 @@ int __init smtc_build_cpu_map(int start_cpu_slot) /* * Common setup before any secondaries are started - * Make sure all CPU's are in a sensible state before we boot any of the + * Make sure all CPUs are in a sensible state before we boot any of the * secondaries. * * For MIPS MT "SMTC" operation, we set up all TCs, spread as evenly @@ -340,12 +340,12 @@ static void smtc_tc_setup(int vpe, int tc, int cpu) /* * TCContext gets an offset from the base of the IPIQ array * to be used in low-level code to detect the presence of - * an active IPI queue + * an active IPI queue. */ write_tc_c0_tccontext((sizeof(struct smtc_ipi_q) * cpu) << 16); /* Bind tc to vpe */ write_tc_c0_tcbind(vpe); - /* In general, all TCs should have the same cpu_data indications */ + /* In general, all TCs should have the same cpu_data indications. */ memcpy(&cpu_data[cpu], &cpu_data[0], sizeof(struct cpuinfo_mips)); /* For 34Kf, start with TC/CPU 0 as sole owner of single FPU context */ if (cpu_data[0].cputype == CPU_34K || @@ -358,8 +358,8 @@ static void smtc_tc_setup(int vpe, int tc, int cpu) } /* - * Tweak to get Count registes in as close a sync as possible. - * Value seems good for 34K-class cores. + * Tweak to get Count registes in as close a sync as possible. The + * value seems good for 34K-class cores. */ #define CP0_SKEW 8 @@ -615,7 +615,6 @@ void __cpuinit smtc_boot_secondary(int cpu, struct task_struct *idle) void smtc_init_secondary(void) { - local_irq_enable(); } void smtc_smp_finish(void) @@ -631,6 +630,8 @@ void smtc_smp_finish(void) if (cpu > 0 && (cpu_data[cpu].vpe_id != cpu_data[cpu - 1].vpe_id)) write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ); + local_irq_enable(); + printk("TC %d going on-line as CPU %d\n", cpu_data[smp_processor_id()].tc_id, smp_processor_id()); } diff --git a/arch/mips/kernel/sync-r4k.c b/arch/mips/kernel/sync-r4k.c index 99f913c..842d55e 100644 --- a/arch/mips/kernel/sync-r4k.c +++ b/arch/mips/kernel/sync-r4k.c @@ -111,7 +111,6 @@ void __cpuinit synchronise_count_master(void) void __cpuinit synchronise_count_slave(void) { int i; - unsigned long flags; unsigned int initcount; int ncpus; @@ -123,8 +122,6 @@ void __cpuinit synchronise_count_slave(void) return; #endif - local_irq_save(flags); - /* * Not every cpu is online at the time this gets called, * so we first wait for the master to say everyone is ready @@ -154,7 +151,5 @@ void __cpuinit synchronise_count_slave(void) } /* Arrange for an interrupt in a short while */ write_c0_compare(read_c0_count() + COUNTON); - - local_irq_restore(flags); } #undef NR_LOOPS diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index 2d0c2a2..c3c2935 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -132,6 +132,9 @@ static void show_backtrace(struct task_struct *task, const struct pt_regs *regs) unsigned long ra = regs->regs[31]; unsigned long pc = regs->cp0_epc; + if (!task) + task = current; + if (raw_show_trace || !__kernel_text_address(pc)) { show_raw_backtrace(sp); return; @@ -1249,6 +1252,7 @@ static inline void parity_protection_init(void) break; case CPU_5KC: + case CPU_5KE: write_c0_ecc(0x80000000); back_to_back_c0_hazard(); /* Set the PE bit (bit 31) in the c0_errctl register. */ @@ -1498,6 +1502,7 @@ extern void flush_tlb_handlers(void); * Timer interrupt */ int cp0_compare_irq; +EXPORT_SYMBOL_GPL(cp0_compare_irq); int cp0_compare_irq_shift; /* @@ -1597,7 +1602,7 @@ void __cpuinit per_cpu_trap_init(bool is_boot_cpu) cp0_perfcount_irq = -1; } else { cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ; - cp0_compare_irq_shift = cp0_compare_irq; + cp0_compare_irq_shift = CP0_LEGACY_PERFCNT_IRQ; cp0_perfcount_irq = -1; } diff --git a/arch/mips/kernel/vmlinux.lds.S b/arch/mips/kernel/vmlinux.lds.S index 924da5e..df243a6 100644 --- a/arch/mips/kernel/vmlinux.lds.S +++ b/arch/mips/kernel/vmlinux.lds.S @@ -1,5 +1,6 @@ #include <asm/asm-offsets.h> #include <asm/page.h> +#include <asm/thread_info.h> #include <asm-generic/vmlinux.lds.h> #undef mips @@ -72,7 +73,7 @@ SECTIONS .data : { /* Data */ . = . + DATAOFFSET; /* for CONFIG_MAPPED_KERNEL */ - INIT_TASK_DATA(PAGE_SIZE) + INIT_TASK_DATA(THREAD_SIZE) NOSAVE_DATA CACHELINE_ALIGNED_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT) READ_MOSTLY_DATA(1 << CONFIG_MIPS_L1_CACHE_SHIFT) diff --git a/arch/mips/mm/Makefile b/arch/mips/mm/Makefile index 4aa2028..fd6203f 100644 --- a/arch/mips/mm/Makefile +++ b/arch/mips/mm/Makefile @@ -3,8 +3,8 @@ # obj-y += cache.o dma-default.o extable.o fault.o \ - gup.o init.o mmap.o page.o tlbex.o \ - tlbex-fault.o uasm.o + gup.o init.o mmap.o page.o page-funcs.o \ + tlbex.o tlbex-fault.o uasm.o obj-$(CONFIG_32BIT) += ioremap.o pgtable-32.o obj-$(CONFIG_64BIT) += pgtable-64.o diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 5109be9..f092c26 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -977,7 +977,7 @@ static void __cpuinit probe_pcache(void) c->icache.linesz = 2 << lsize; else c->icache.linesz = lsize; - c->icache.sets = 64 << ((config1 >> 22) & 7); + c->icache.sets = 32 << (((config1 >> 22) + 1) & 7); c->icache.ways = 1 + ((config1 >> 16) & 7); icache_size = c->icache.sets * @@ -997,7 +997,7 @@ static void __cpuinit probe_pcache(void) c->dcache.linesz = 2 << lsize; else c->dcache.linesz= lsize; - c->dcache.sets = 64 << ((config1 >> 13) & 7); + c->dcache.sets = 32 << (((config1 >> 13) + 1) & 7); c->dcache.ways = 1 + ((config1 >> 7) & 7); dcache_size = c->dcache.sets * @@ -1051,6 +1051,7 @@ static void __cpuinit probe_pcache(void) case CPU_R14000: break; + case CPU_M14KC: case CPU_24K: case CPU_34K: case CPU_74K: diff --git a/arch/mips/mm/page-funcs.S b/arch/mips/mm/page-funcs.S new file mode 100644 index 0000000..48a6b38 --- /dev/null +++ b/arch/mips/mm/page-funcs.S @@ -0,0 +1,50 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Micro-assembler generated clear_page/copy_page functions. + * + * Copyright (C) 2012 MIPS Technologies, Inc. + * Copyright (C) 2012 Ralf Baechle <ralf@linux-mips.org> + */ +#include <asm/asm.h> +#include <asm/regdef.h> + +#ifdef CONFIG_SIBYTE_DMA_PAGEOPS +#define cpu_clear_page_function_name clear_page_cpu +#define cpu_copy_page_function_name copy_page_cpu +#else +#define cpu_clear_page_function_name clear_page +#define cpu_copy_page_function_name copy_page +#endif + +/* + * Maximum sizes: + * + * R4000 128 bytes S-cache: 0x058 bytes + * R4600 v1.7: 0x05c bytes + * R4600 v2.0: 0x060 bytes + * With prefetching, 16 word strides 0x120 bytes + */ +EXPORT(__clear_page_start) +LEAF(cpu_clear_page_function_name) +1: j 1b /* Dummy, will be replaced. */ + .space 288 +END(cpu_clear_page_function_name) +EXPORT(__clear_page_end) + +/* + * Maximum sizes: + * + * R4000 128 bytes S-cache: 0x11c bytes + * R4600 v1.7: 0x080 bytes + * R4600 v2.0: 0x07c bytes + * With prefetching, 16 word strides 0x540 bytes + */ +EXPORT(__copy_page_start) +LEAF(cpu_copy_page_function_name) +1: j 1b /* Dummy, will be replaced. */ + .space 1344 +END(cpu_copy_page_function_name) +EXPORT(__copy_page_end) diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c index cc0b6268..98f530e 100644 --- a/arch/mips/mm/page.c +++ b/arch/mips/mm/page.c @@ -6,6 +6,7 @@ * Copyright (C) 2003, 04, 05 Ralf Baechle (ralf@linux-mips.org) * Copyright (C) 2007 Maciej W. Rozycki * Copyright (C) 2008 Thiemo Seufer + * Copyright (C) 2012 MIPS Technologies, Inc. */ #include <linux/init.h> #include <linux/kernel.h> @@ -71,45 +72,6 @@ static struct uasm_reloc __cpuinitdata relocs[5]; #define cpu_is_r4600_v1_x() ((read_c0_prid() & 0xfffffff0) == 0x00002010) #define cpu_is_r4600_v2_x() ((read_c0_prid() & 0xfffffff0) == 0x00002020) -/* - * Maximum sizes: - * - * R4000 128 bytes S-cache: 0x058 bytes - * R4600 v1.7: 0x05c bytes - * R4600 v2.0: 0x060 bytes - * With prefetching, 16 word strides 0x120 bytes - */ - -static u32 clear_page_array[0x120 / 4]; - -#ifdef CONFIG_SIBYTE_DMA_PAGEOPS -void clear_page_cpu(void *page) __attribute__((alias("clear_page_array"))); -#else -void clear_page(void *page) __attribute__((alias("clear_page_array"))); -#endif - -EXPORT_SYMBOL(clear_page); - -/* - * Maximum sizes: - * - * R4000 128 bytes S-cache: 0x11c bytes - * R4600 v1.7: 0x080 bytes - * R4600 v2.0: 0x07c bytes - * With prefetching, 16 word strides 0x540 bytes - */ -static u32 copy_page_array[0x540 / 4]; - -#ifdef CONFIG_SIBYTE_DMA_PAGEOPS -void -copy_page_cpu(void *to, void *from) __attribute__((alias("copy_page_array"))); -#else -void copy_page(void *to, void *from) __attribute__((alias("copy_page_array"))); -#endif - -EXPORT_SYMBOL(copy_page); - - static int pref_bias_clear_store __cpuinitdata; static int pref_bias_copy_load __cpuinitdata; static int pref_bias_copy_store __cpuinitdata; @@ -282,10 +244,15 @@ static inline void __cpuinit build_clear_pref(u32 **buf, int off) } } +extern u32 __clear_page_start; +extern u32 __clear_page_end; +extern u32 __copy_page_start; +extern u32 __copy_page_end; + void __cpuinit build_clear_page(void) { int off; - u32 *buf = (u32 *)&clear_page_array; + u32 *buf = &__clear_page_start; struct uasm_label *l = labels; struct uasm_reloc *r = relocs; int i; @@ -356,17 +323,17 @@ void __cpuinit build_clear_page(void) uasm_i_jr(&buf, RA); uasm_i_nop(&buf); - BUG_ON(buf > clear_page_array + ARRAY_SIZE(clear_page_array)); + BUG_ON(buf > &__clear_page_end); uasm_resolve_relocs(relocs, labels); pr_debug("Synthesized clear page handler (%u instructions).\n", - (u32)(buf - clear_page_array)); + (u32)(buf - &__clear_page_start)); pr_debug("\t.set push\n"); pr_debug("\t.set noreorder\n"); - for (i = 0; i < (buf - clear_page_array); i++) - pr_debug("\t.word 0x%08x\n", clear_page_array[i]); + for (i = 0; i < (buf - &__clear_page_start); i++) + pr_debug("\t.word 0x%08x\n", (&__clear_page_start)[i]); pr_debug("\t.set pop\n"); } @@ -427,7 +394,7 @@ static inline void build_copy_store_pref(u32 **buf, int off) void __cpuinit build_copy_page(void) { int off; - u32 *buf = (u32 *)©_page_array; + u32 *buf = &__copy_page_start; struct uasm_label *l = labels; struct uasm_reloc *r = relocs; int i; @@ -595,21 +562,23 @@ void __cpuinit build_copy_page(void) uasm_i_jr(&buf, RA); uasm_i_nop(&buf); - BUG_ON(buf > copy_page_array + ARRAY_SIZE(copy_page_array)); + BUG_ON(buf > &__copy_page_end); uasm_resolve_relocs(relocs, labels); pr_debug("Synthesized copy page handler (%u instructions).\n", - (u32)(buf - copy_page_array)); + (u32)(buf - &__copy_page_start)); pr_debug("\t.set push\n"); pr_debug("\t.set noreorder\n"); - for (i = 0; i < (buf - copy_page_array); i++) - pr_debug("\t.word 0x%08x\n", copy_page_array[i]); + for (i = 0; i < (buf - &__copy_page_start); i++) + pr_debug("\t.word 0x%08x\n", (&__copy_page_start)[i]); pr_debug("\t.set pop\n"); } #ifdef CONFIG_SIBYTE_DMA_PAGEOPS +extern void clear_page_cpu(void *page); +extern void copy_page_cpu(void *to, void *from); /* * Pad descriptors to cacheline, since each is exclusively owned by a diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 0bc485b..03eb0ef 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -9,6 +9,7 @@ * Copyright (C) 2005, 2007, 2008, 2009 Maciej W. Rozycki * Copyright (C) 2006 Ralf Baechle (ralf@linux-mips.org) * Copyright (C) 2008, 2009 Cavium Networks, Inc. + * Copyright (C) 2011 MIPS Technologies, Inc. * * ... and the days got worse and worse and now you see * I've gone completly out of my mind. @@ -494,6 +495,7 @@ static void __cpuinit build_tlb_write_entry(u32 **p, struct uasm_label **l, case CPU_R14000: case CPU_4KC: case CPU_4KEC: + case CPU_M14KC: case CPU_SB1: case CPU_SB1A: case CPU_4KSC: diff --git a/arch/mips/mti-malta/malta-pci.c b/arch/mips/mti-malta/malta-pci.c index bf80921..284dea5 100644 --- a/arch/mips/mti-malta/malta-pci.c +++ b/arch/mips/mti-malta/malta-pci.c @@ -241,8 +241,9 @@ void __init mips_pcibios_init(void) return; } - if (controller->io_resource->start < 0x00001000UL) /* FIXME */ - controller->io_resource->start = 0x00001000UL; + /* Change start address to avoid conflicts with ACPI and SMB devices */ + if (controller->io_resource->start < 0x00002000UL) + controller->io_resource->start = 0x00002000UL; iomem_resource.end &= 0xfffffffffULL; /* 64 GB */ ioport_resource.end = controller->io_resource->end; @@ -253,7 +254,7 @@ void __init mips_pcibios_init(void) } /* Enable PCI 2.1 compatibility in PIIX4 */ -static void __init quirk_dlcsetup(struct pci_dev *dev) +static void __devinit quirk_dlcsetup(struct pci_dev *dev) { u8 odlc, ndlc; (void) pci_read_config_byte(dev, 0x82, &odlc); diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c index b7f37d4..2e28f65 100644 --- a/arch/mips/mti-malta/malta-setup.c +++ b/arch/mips/mti-malta/malta-setup.c @@ -111,7 +111,7 @@ static void __init pci_clock_check(void) unsigned int __iomem *jmpr_p = (unsigned int *) ioremap(MALTA_JMPRS_REG, sizeof(unsigned int)); int jmpr = (__raw_readl(jmpr_p) >> 2) & 0x07; - static const int pciclocks[] __initdata = { + static const int pciclocks[] __initconst = { 33, 20, 25, 30, 12, 16, 37, 10 }; int pciclock = pciclocks[jmpr]; diff --git a/arch/mips/netlogic/xlp/setup.c b/arch/mips/netlogic/xlp/setup.c index acb677a..b3df7c2 100644 --- a/arch/mips/netlogic/xlp/setup.c +++ b/arch/mips/netlogic/xlp/setup.c @@ -82,8 +82,10 @@ void __init prom_free_prom_memory(void) void xlp_mmu_init(void) { + /* enable extended TLB and Large Fixed TLB */ write_c0_config6(read_c0_config6() | 0x24); - current_cpu_data.tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1; + + /* set page mask of Fixed TLB in config7 */ write_c0_config7(PM_DEFAULT_MASK >> (13 + (ffz(PM_DEFAULT_MASK >> 13) / 2))); } @@ -100,6 +102,10 @@ void __init prom_init(void) nlm_common_ebase = read_c0_ebase() & (~((1 << 12) - 1)); #ifdef CONFIG_SMP nlm_wakeup_secondary_cpus(0xffffffff); + + /* update TLB size after waking up threads */ + current_cpu_data.tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1; + register_smp_ops(&nlm_smp_ops); #endif } diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c index d1f2d4c..b6e3782 100644 --- a/arch/mips/oprofile/common.c +++ b/arch/mips/oprofile/common.c @@ -78,6 +78,7 @@ int __init oprofile_arch_init(struct oprofile_operations *ops) switch (current_cpu_type()) { case CPU_5KC: + case CPU_M14KC: case CPU_20KC: case CPU_24K: case CPU_25KF: diff --git a/arch/mips/oprofile/op_model_mipsxx.c b/arch/mips/oprofile/op_model_mipsxx.c index baba3bc..4d80a85 100644 --- a/arch/mips/oprofile/op_model_mipsxx.c +++ b/arch/mips/oprofile/op_model_mipsxx.c @@ -322,6 +322,10 @@ static int __init mipsxx_init(void) op_model_mipsxx_ops.num_counters = counters; switch (current_cpu_type()) { + case CPU_M14KC: + op_model_mipsxx_ops.cpu_type = "mips/M14Kc"; + break; + case CPU_20KC: op_model_mipsxx_ops.cpu_type = "mips/20K"; break; diff --git a/arch/mips/pci/fixup-fuloong2e.c b/arch/mips/pci/fixup-fuloong2e.c index d5d4c01..0857ab8 100644 --- a/arch/mips/pci/fixup-fuloong2e.c +++ b/arch/mips/pci/fixup-fuloong2e.c @@ -48,7 +48,7 @@ int pcibios_plat_dev_init(struct pci_dev *dev) return 0; } -static void __init loongson2e_nec_fixup(struct pci_dev *pdev) +static void __devinit loongson2e_nec_fixup(struct pci_dev *pdev) { unsigned int val; @@ -60,7 +60,7 @@ static void __init loongson2e_nec_fixup(struct pci_dev *pdev) pci_write_config_dword(pdev, 0xe4, 1 << 5); } -static void __init loongson2e_686b_func0_fixup(struct pci_dev *pdev) +static void __devinit loongson2e_686b_func0_fixup(struct pci_dev *pdev) { unsigned char c; @@ -135,7 +135,7 @@ static void __init loongson2e_686b_func0_fixup(struct pci_dev *pdev) printk(KERN_INFO"via686b fix: ISA bridge done\n"); } -static void __init loongson2e_686b_func1_fixup(struct pci_dev *pdev) +static void __devinit loongson2e_686b_func1_fixup(struct pci_dev *pdev) { printk(KERN_INFO"via686b fix: IDE\n"); @@ -168,19 +168,19 @@ static void __init loongson2e_686b_func1_fixup(struct pci_dev *pdev) printk(KERN_INFO"via686b fix: IDE done\n"); } -static void __init loongson2e_686b_func2_fixup(struct pci_dev *pdev) +static void __devinit loongson2e_686b_func2_fixup(struct pci_dev *pdev) { /* irq routing */ pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 10); } -static void __init loongson2e_686b_func3_fixup(struct pci_dev *pdev) +static void __devinit loongson2e_686b_func3_fixup(struct pci_dev *pdev) { /* irq routing */ pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 11); } -static void __init loongson2e_686b_func5_fixup(struct pci_dev *pdev) +static void __devinit loongson2e_686b_func5_fixup(struct pci_dev *pdev) { unsigned int val; unsigned char c; diff --git a/arch/mips/pci/fixup-lemote2f.c b/arch/mips/pci/fixup-lemote2f.c index 4b9768d..a7b917dcf 100644 --- a/arch/mips/pci/fixup-lemote2f.c +++ b/arch/mips/pci/fixup-lemote2f.c @@ -96,21 +96,21 @@ int pcibios_plat_dev_init(struct pci_dev *dev) } /* CS5536 SPEC. fixup */ -static void __init loongson_cs5536_isa_fixup(struct pci_dev *pdev) +static void __devinit loongson_cs5536_isa_fixup(struct pci_dev *pdev) { /* the uart1 and uart2 interrupt in PIC is enabled as default */ pci_write_config_dword(pdev, PCI_UART1_INT_REG, 1); pci_write_config_dword(pdev, PCI_UART2_INT_REG, 1); } -static void __init loongson_cs5536_ide_fixup(struct pci_dev *pdev) +static void __devinit loongson_cs5536_ide_fixup(struct pci_dev *pdev) { /* setting the mutex pin as IDE function */ pci_write_config_dword(pdev, PCI_IDE_CFG_REG, CS5536_IDE_FLASH_SIGNATURE); } -static void __init loongson_cs5536_acc_fixup(struct pci_dev *pdev) +static void __devinit loongson_cs5536_acc_fixup(struct pci_dev *pdev) { /* enable the AUDIO interrupt in PIC */ pci_write_config_dword(pdev, PCI_ACC_INT_REG, 1); @@ -118,14 +118,14 @@ static void __init loongson_cs5536_acc_fixup(struct pci_dev *pdev) pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 0xc0); } -static void __init loongson_cs5536_ohci_fixup(struct pci_dev *pdev) +static void __devinit loongson_cs5536_ohci_fixup(struct pci_dev *pdev) { /* enable the OHCI interrupt in PIC */ /* THE OHCI, EHCI, UDC, OTG are shared with interrupt in PIC */ pci_write_config_dword(pdev, PCI_OHCI_INT_REG, 1); } -static void __init loongson_cs5536_ehci_fixup(struct pci_dev *pdev) +static void __devinit loongson_cs5536_ehci_fixup(struct pci_dev *pdev) { u32 hi, lo; @@ -137,7 +137,7 @@ static void __init loongson_cs5536_ehci_fixup(struct pci_dev *pdev) pci_write_config_dword(pdev, PCI_EHCI_FLADJ_REG, 0x2000); } -static void __init loongson_nec_fixup(struct pci_dev *pdev) +static void __devinit loongson_nec_fixup(struct pci_dev *pdev) { unsigned int val; diff --git a/arch/mips/pci/fixup-malta.c b/arch/mips/pci/fixup-malta.c index 0f48498..70073c9 100644 --- a/arch/mips/pci/fixup-malta.c +++ b/arch/mips/pci/fixup-malta.c @@ -49,10 +49,10 @@ int pcibios_plat_dev_init(struct pci_dev *dev) return 0; } -static void __init malta_piix_func0_fixup(struct pci_dev *pdev) +static void __devinit malta_piix_func0_fixup(struct pci_dev *pdev) { unsigned char reg_val; - static int piixirqmap[16] __initdata = { /* PIIX PIRQC[A:D] irq mappings */ + static int piixirqmap[16] __devinitdata = { /* PIIX PIRQC[A:D] irq mappings */ 0, 0, 0, 3, 4, 5, 6, 7, 0, 9, 10, 11, @@ -83,7 +83,7 @@ static void __init malta_piix_func0_fixup(struct pci_dev *pdev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_0, malta_piix_func0_fixup); -static void __init malta_piix_func1_fixup(struct pci_dev *pdev) +static void __devinit malta_piix_func1_fixup(struct pci_dev *pdev) { unsigned char reg_val; diff --git a/arch/mips/pci/fixup-mpc30x.c b/arch/mips/pci/fixup-mpc30x.c index e08f49c..8e4f828 100644 --- a/arch/mips/pci/fixup-mpc30x.c +++ b/arch/mips/pci/fixup-mpc30x.c @@ -22,13 +22,13 @@ #include <asm/vr41xx/mpc30x.h> -static const int internal_func_irqs[] __initdata = { +static const int internal_func_irqs[] __initconst = { VRC4173_CASCADE_IRQ, VRC4173_AC97_IRQ, VRC4173_USB_IRQ, }; -static const int irq_tab_mpc30x[] __initdata = { +static const int irq_tab_mpc30x[] __initconst = { [12] = VRC4173_PCMCIA1_IRQ, [13] = VRC4173_PCMCIA2_IRQ, [29] = MQ200_IRQ, diff --git a/arch/mips/pci/fixup-sb1250.c b/arch/mips/pci/fixup-sb1250.c index f0bb914..d02900a 100644 --- a/arch/mips/pci/fixup-sb1250.c +++ b/arch/mips/pci/fixup-sb1250.c @@ -15,7 +15,7 @@ * Set the BCM1250, etc. PCI host bridge's TRDY timeout * to the finite max. */ -static void __init quirk_sb1250_pci(struct pci_dev *dev) +static void __devinit quirk_sb1250_pci(struct pci_dev *dev) { pci_write_config_byte(dev, 0x40, 0xff); } @@ -25,7 +25,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SIBYTE, PCI_DEVICE_ID_BCM1250_PCI, /* * The BCM1250, etc. PCI/HT bridge reports as a host bridge. */ -static void __init quirk_sb1250_ht(struct pci_dev *dev) +static void __devinit quirk_sb1250_ht(struct pci_dev *dev) { dev->class = PCI_CLASS_BRIDGE_PCI << 8; } @@ -35,7 +35,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SIBYTE, PCI_DEVICE_ID_BCM1250_HT, /* * Set the SP1011 HT/PCI bridge's TRDY timeout to the finite max. */ -static void __init quirk_sp1011(struct pci_dev *dev) +static void __devinit quirk_sp1011(struct pci_dev *dev) { pci_write_config_byte(dev, 0x64, 0xff); } diff --git a/arch/mips/pci/ops-tx4927.c b/arch/mips/pci/ops-tx4927.c index a1e7e6d..bc13e29 100644 --- a/arch/mips/pci/ops-tx4927.c +++ b/arch/mips/pci/ops-tx4927.c @@ -495,7 +495,7 @@ irqreturn_t tx4927_pcierr_interrupt(int irq, void *dev_id) } #ifdef CONFIG_TOSHIBA_FPCIB0 -static void __init tx4927_quirk_slc90e66_bridge(struct pci_dev *dev) +static void __devinit tx4927_quirk_slc90e66_bridge(struct pci_dev *dev) { struct tx4927_pcic_reg __iomem *pcicptr = pci_bus_to_pcicptr(dev->bus); diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c index 0fbe4c0..fdc2444 100644 --- a/arch/mips/pci/pci-ip27.c +++ b/arch/mips/pci/pci-ip27.c @@ -212,7 +212,7 @@ static inline void pci_enable_swapping(struct pci_dev *dev) bridge->b_widget.w_tflush; /* Flush */ } -static void __init pci_fixup_ioc3(struct pci_dev *d) +static void __devinit pci_fixup_ioc3(struct pci_dev *d) { pci_disable_swapping(d); } diff --git a/arch/mips/pci/pci-lantiq.c b/arch/mips/pci/pci-lantiq.c index ea45353..075d87a 100644 --- a/arch/mips/pci/pci-lantiq.c +++ b/arch/mips/pci/pci-lantiq.c @@ -129,7 +129,7 @@ static int __devinit ltq_pci_startup(struct platform_device *pdev) /* setup reset gpio used by pci */ reset_gpio = of_get_named_gpio(node, "gpio-reset", 0); - if (reset_gpio > 0) + if (gpio_is_valid(reset_gpio)) devm_gpio_request(&pdev->dev, reset_gpio, "pci-reset"); /* enable auto-switching between PCI and EBU */ @@ -192,7 +192,7 @@ static int __devinit ltq_pci_startup(struct platform_device *pdev) ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_IEN) | 0x10, LTQ_EBU_PCC_IEN); /* toggle reset pin */ - if (reset_gpio > 0) { + if (gpio_is_valid(reset_gpio)) { __gpio_set_value(reset_gpio, 0); wmb(); mdelay(1); diff --git a/arch/mips/pci/pci-xlr.c b/arch/mips/pci/pci-xlr.c index 1644805..172af1c 100644 --- a/arch/mips/pci/pci-xlr.c +++ b/arch/mips/pci/pci-xlr.c @@ -41,6 +41,7 @@ #include <linux/irq.h> #include <linux/irqdesc.h> #include <linux/console.h> +#include <linux/pci_regs.h> #include <asm/io.h> @@ -156,35 +157,55 @@ struct pci_controller nlm_pci_controller = { .io_offset = 0x00000000UL, }; +/* + * The top level PCIe links on the XLS PCIe controller appear as + * bridges. Given a device, this function finds which link it is + * on. + */ +static struct pci_dev *xls_get_pcie_link(const struct pci_dev *dev) +{ + struct pci_bus *bus, *p; + + /* Find the bridge on bus 0 */ + bus = dev->bus; + for (p = bus->parent; p && p->number != 0; p = p->parent) + bus = p; + + return p ? bus->self : NULL; +} + static int get_irq_vector(const struct pci_dev *dev) { + struct pci_dev *lnk; + if (!nlm_chip_is_xls()) - return PIC_PCIX_IRQ; /* for XLR just one IRQ*/ + return PIC_PCIX_IRQ; /* for XLR just one IRQ */ /* * For XLS PCIe, there is an IRQ per Link, find out which * link the device is on to assign interrupts - */ - if (dev->bus->self == NULL) + */ + lnk = xls_get_pcie_link(dev); + if (lnk == NULL) return 0; - switch (dev->bus->self->devfn) { - case 0x0: + switch (PCI_SLOT(lnk->devfn)) { + case 0: return PIC_PCIE_LINK0_IRQ; - case 0x8: + case 1: return PIC_PCIE_LINK1_IRQ; - case 0x10: + case 2: if (nlm_chip_is_xls_b()) return PIC_PCIE_XLSB0_LINK2_IRQ; else return PIC_PCIE_LINK2_IRQ; - case 0x18: + case 3: if (nlm_chip_is_xls_b()) return PIC_PCIE_XLSB0_LINK3_IRQ; else return PIC_PCIE_LINK3_IRQ; } - WARN(1, "Unexpected devfn %d\n", dev->bus->self->devfn); + WARN(1, "Unexpected devfn %d\n", lnk->devfn); return 0; } @@ -202,7 +223,27 @@ void arch_teardown_msi_irq(unsigned int irq) int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc) { struct msi_msg msg; + struct pci_dev *lnk; int irq, ret; + u16 val; + + /* MSI not supported on XLR */ + if (!nlm_chip_is_xls()) + return 1; + + /* + * Enable MSI on the XLS PCIe controller bridge which was disabled + * at enumeration, the bridge MSI capability is at 0x50 + */ + lnk = xls_get_pcie_link(dev); + if (lnk == NULL) + return 1; + + pci_read_config_word(lnk, 0x50 + PCI_MSI_FLAGS, &val); + if ((val & PCI_MSI_FLAGS_ENABLE) == 0) { + val |= PCI_MSI_FLAGS_ENABLE; + pci_write_config_word(lnk, 0x50 + PCI_MSI_FLAGS, val); + } irq = get_irq_vector(dev); if (irq <= 0) @@ -327,7 +368,7 @@ static int __init pcibios_init(void) } } else { /* XLR PCI controller ACK */ - irq_set_handler_data(PIC_PCIE_XLSB0_LINK3_IRQ, xlr_pci_ack); + irq_set_handler_data(PIC_PCIX_IRQ, xlr_pci_ack); } return 0; diff --git a/arch/mips/pmc-sierra/yosemite/smp.c b/arch/mips/pmc-sierra/yosemite/smp.c index b71fae2..5edab2b 100644 --- a/arch/mips/pmc-sierra/yosemite/smp.c +++ b/arch/mips/pmc-sierra/yosemite/smp.c @@ -115,11 +115,11 @@ static void yos_send_ipi_mask(const struct cpumask *mask, unsigned int action) */ static void __cpuinit yos_init_secondary(void) { - set_c0_status(ST0_CO | ST0_IE | ST0_IM); } static void __cpuinit yos_smp_finish(void) { + set_c0_status(ST0_CO | ST0_IM | ST0_IE); } /* Hook for after all CPUs are online */ diff --git a/arch/mips/powertv/asic/asic-calliope.c b/arch/mips/powertv/asic/asic-calliope.c index 0a170e0..7773f3d 100644 --- a/arch/mips/powertv/asic/asic-calliope.c +++ b/arch/mips/powertv/asic/asic-calliope.c @@ -28,7 +28,7 @@ #define CALLIOPE_ADDR(x) (CALLIOPE_IO_BASE + (x)) -const struct register_map calliope_register_map __initdata = { +const struct register_map calliope_register_map __initconst = { .eic_slow0_strt_add = {.phys = CALLIOPE_ADDR(0x800000)}, .eic_cfg_bits = {.phys = CALLIOPE_ADDR(0x800038)}, .eic_ready_status = {.phys = CALLIOPE_ADDR(0x80004c)}, diff --git a/arch/mips/powertv/asic/asic-cronus.c b/arch/mips/powertv/asic/asic-cronus.c index bbc0c12..da076db 100644 --- a/arch/mips/powertv/asic/asic-cronus.c +++ b/arch/mips/powertv/asic/asic-cronus.c @@ -28,7 +28,7 @@ #define CRONUS_ADDR(x) (CRONUS_IO_BASE + (x)) -const struct register_map cronus_register_map __initdata = { +const struct register_map cronus_register_map __initconst = { .eic_slow0_strt_add = {.phys = CRONUS_ADDR(0x000000)}, .eic_cfg_bits = {.phys = CRONUS_ADDR(0x000038)}, .eic_ready_status = {.phys = CRONUS_ADDR(0x00004C)}, diff --git a/arch/mips/powertv/asic/asic-gaia.c b/arch/mips/powertv/asic/asic-gaia.c index 91dda68..47683b3 100644 --- a/arch/mips/powertv/asic/asic-gaia.c +++ b/arch/mips/powertv/asic/asic-gaia.c @@ -23,7 +23,7 @@ #include <linux/init.h> #include <asm/mach-powertv/asic.h> -const struct register_map gaia_register_map __initdata = { +const struct register_map gaia_register_map __initconst = { .eic_slow0_strt_add = {.phys = GAIA_IO_BASE + 0x000000}, .eic_cfg_bits = {.phys = GAIA_IO_BASE + 0x000038}, .eic_ready_status = {.phys = GAIA_IO_BASE + 0x00004C}, diff --git a/arch/mips/powertv/asic/asic-zeus.c b/arch/mips/powertv/asic/asic-zeus.c index 4a05bb0..6ff4b10f 100644 --- a/arch/mips/powertv/asic/asic-zeus.c +++ b/arch/mips/powertv/asic/asic-zeus.c @@ -28,7 +28,7 @@ #define ZEUS_ADDR(x) (ZEUS_IO_BASE + (x)) -const struct register_map zeus_register_map __initdata = { +const struct register_map zeus_register_map __initconst = { .eic_slow0_strt_add = {.phys = ZEUS_ADDR(0x000000)}, .eic_cfg_bits = {.phys = ZEUS_ADDR(0x000038)}, .eic_ready_status = {.phys = ZEUS_ADDR(0x00004c)}, diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c index 682efb0..64eb71b 100644 --- a/arch/mips/txx9/generic/pci.c +++ b/arch/mips/txx9/generic/pci.c @@ -269,7 +269,7 @@ txx9_i8259_irq_setup(int irq) return err; } -static void __init quirk_slc90e66_bridge(struct pci_dev *dev) +static void __devinit quirk_slc90e66_bridge(struct pci_dev *dev) { int irq; /* PCI/ISA Bridge interrupt */ u8 reg_64; diff --git a/arch/mn10300/include/asm/ptrace.h b/arch/mn10300/include/asm/ptrace.h index 55b79ef..44251b9 100644 --- a/arch/mn10300/include/asm/ptrace.h +++ b/arch/mn10300/include/asm/ptrace.h @@ -81,9 +81,6 @@ struct pt_regs { #define PTRACE_GETFPREGS 14 #define PTRACE_SETFPREGS 15 -/* options set using PTRACE_SETOPTIONS */ -#define PTRACE_O_TRACESYSGOOD 0x00000001 - #ifdef __KERNEL__ #define user_mode(regs) (((regs)->epsw & EPSW_nSL) == EPSW_nSL) diff --git a/arch/mn10300/include/asm/thread_info.h b/arch/mn10300/include/asm/thread_info.h index 08251d6..ac519bb 100644 --- a/arch/mn10300/include/asm/thread_info.h +++ b/arch/mn10300/include/asm/thread_info.h @@ -123,7 +123,7 @@ static inline unsigned long current_stack_pointer(void) } #ifndef CONFIG_KGDB -void arch_release_thread_info(struct thread_info *ti) +void arch_release_thread_info(struct thread_info *ti); #endif #define get_thread_info(ti) get_task_struct((ti)->task) #define put_thread_info(ti) put_task_struct((ti)->task) diff --git a/arch/mn10300/include/asm/timex.h b/arch/mn10300/include/asm/timex.h index bd4e90d..f8e6642 100644 --- a/arch/mn10300/include/asm/timex.h +++ b/arch/mn10300/include/asm/timex.h @@ -11,7 +11,6 @@ #ifndef _ASM_TIMEX_H #define _ASM_TIMEX_H -#include <asm/hardirq.h> #include <unit/timex.h> #define TICK_SIZE (tick_nsec / 1000) @@ -30,16 +29,6 @@ static inline cycles_t get_cycles(void) extern int init_clockevents(void); extern int init_clocksource(void); -static inline void setup_jiffies_interrupt(int irq, - struct irqaction *action) -{ - u16 tmp; - setup_irq(irq, action); - set_intr_level(irq, NUM2GxICR_LEVEL(CONFIG_TIMER_IRQ_LEVEL)); - GxICR(irq) |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST; - tmp = GxICR(irq); -} - #endif /* __KERNEL__ */ #endif /* _ASM_TIMEX_H */ diff --git a/arch/mn10300/kernel/cevt-mn10300.c b/arch/mn10300/kernel/cevt-mn10300.c index 69cae02..ccce35e 100644 --- a/arch/mn10300/kernel/cevt-mn10300.c +++ b/arch/mn10300/kernel/cevt-mn10300.c @@ -70,6 +70,16 @@ static void event_handler(struct clock_event_device *dev) { } +static inline void setup_jiffies_interrupt(int irq, + struct irqaction *action) +{ + u16 tmp; + setup_irq(irq, action); + set_intr_level(irq, NUM2GxICR_LEVEL(CONFIG_TIMER_IRQ_LEVEL)); + GxICR(irq) |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST; + tmp = GxICR(irq); +} + int __init init_clockevents(void) { struct clock_event_device *cd; diff --git a/arch/mn10300/kernel/internal.h b/arch/mn10300/kernel/internal.h index a5ac755..2df4401 100644 --- a/arch/mn10300/kernel/internal.h +++ b/arch/mn10300/kernel/internal.h @@ -9,6 +9,8 @@ * 2 of the Licence, or (at your option) any later version. */ +#include <linux/irqreturn.h> + struct clocksource; struct clock_event_device; diff --git a/arch/mn10300/kernel/irq.c b/arch/mn10300/kernel/irq.c index 2381df8..35932a8 100644 --- a/arch/mn10300/kernel/irq.c +++ b/arch/mn10300/kernel/irq.c @@ -170,9 +170,9 @@ mn10300_cpupic_setaffinity(struct irq_data *d, const struct cpumask *mask, case SC1TXIRQ: #ifdef CONFIG_MN10300_TTYSM1_TIMER12 case TM12IRQ: -#elif CONFIG_MN10300_TTYSM1_TIMER9 +#elif defined(CONFIG_MN10300_TTYSM1_TIMER9) case TM9IRQ: -#elif CONFIG_MN10300_TTYSM1_TIMER3 +#elif defined(CONFIG_MN10300_TTYSM1_TIMER3) case TM3IRQ: #endif /* CONFIG_MN10300_TTYSM1_TIMER12 */ #endif /* CONFIG_MN10300_TTYSM1 */ diff --git a/arch/mn10300/kernel/signal.c b/arch/mn10300/kernel/signal.c index 6ab0bee..4d584ae 100644 --- a/arch/mn10300/kernel/signal.c +++ b/arch/mn10300/kernel/signal.c @@ -459,10 +459,11 @@ static int handle_signal(int sig, else ret = setup_frame(sig, ka, oldset, regs); if (ret) - return; + return ret; signal_delivered(sig, info, ka, regs, - test_thread_flag(TIF_SINGLESTEP)); + test_thread_flag(TIF_SINGLESTEP)); + return 0; } /* diff --git a/arch/mn10300/kernel/traps.c b/arch/mn10300/kernel/traps.c index 94a9c6d..b900e5a 100644 --- a/arch/mn10300/kernel/traps.c +++ b/arch/mn10300/kernel/traps.c @@ -26,6 +26,7 @@ #include <linux/kdebug.h> #include <linux/bug.h> #include <linux/irq.h> +#include <linux/export.h> #include <asm/processor.h> #include <linux/uaccess.h> #include <asm/io.h> diff --git a/arch/mn10300/mm/dma-alloc.c b/arch/mn10300/mm/dma-alloc.c index 159acb0..e244ebe 100644 --- a/arch/mn10300/mm/dma-alloc.c +++ b/arch/mn10300/mm/dma-alloc.c @@ -15,6 +15,7 @@ #include <linux/string.h> #include <linux/pci.h> #include <linux/gfp.h> +#include <linux/export.h> #include <asm/io.h> static unsigned long pci_sram_allocated = 0xbc000000; diff --git a/arch/mn10300/unit-asb2303/include/unit/timex.h b/arch/mn10300/unit-asb2303/include/unit/timex.h index cc18fe7..c37f983 100644 --- a/arch/mn10300/unit-asb2303/include/unit/timex.h +++ b/arch/mn10300/unit-asb2303/include/unit/timex.h @@ -11,10 +11,6 @@ #ifndef _ASM_UNIT_TIMEX_H #define _ASM_UNIT_TIMEX_H -#ifndef __ASSEMBLY__ -#include <linux/irq.h> -#endif /* __ASSEMBLY__ */ - #include <asm/timer-regs.h> #include <unit/clock.h> #include <asm/param.h> diff --git a/arch/mn10300/unit-asb2303/smc91111.c b/arch/mn10300/unit-asb2303/smc91111.c index 43c2464..5367769 100644 --- a/arch/mn10300/unit-asb2303/smc91111.c +++ b/arch/mn10300/unit-asb2303/smc91111.c @@ -15,6 +15,7 @@ #include <linux/platform_device.h> #include <asm/io.h> +#include <asm/irq.h> #include <asm/timex.h> #include <asm/processor.h> #include <asm/intctl-regs.h> diff --git a/arch/mn10300/unit-asb2305/include/unit/timex.h b/arch/mn10300/unit-asb2305/include/unit/timex.h index 758af30..4cefc22 100644 --- a/arch/mn10300/unit-asb2305/include/unit/timex.h +++ b/arch/mn10300/unit-asb2305/include/unit/timex.h @@ -11,10 +11,6 @@ #ifndef _ASM_UNIT_TIMEX_H #define _ASM_UNIT_TIMEX_H -#ifndef __ASSEMBLY__ -#include <linux/irq.h> -#endif /* __ASSEMBLY__ */ - #include <asm/timer-regs.h> #include <unit/clock.h> #include <asm/param.h> diff --git a/arch/mn10300/unit-asb2305/unit-init.c b/arch/mn10300/unit-asb2305/unit-init.c index e1becd6..bc4adfa 100644 --- a/arch/mn10300/unit-asb2305/unit-init.c +++ b/arch/mn10300/unit-asb2305/unit-init.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/pci.h> #include <asm/io.h> +#include <asm/irq.h> #include <asm/setup.h> #include <asm/processor.h> #include <asm/intctl-regs.h> diff --git a/arch/mn10300/unit-asb2364/include/unit/timex.h b/arch/mn10300/unit-asb2364/include/unit/timex.h index ddb7ed0..42f32db 100644 --- a/arch/mn10300/unit-asb2364/include/unit/timex.h +++ b/arch/mn10300/unit-asb2364/include/unit/timex.h @@ -11,10 +11,6 @@ #ifndef _ASM_UNIT_TIMEX_H #define _ASM_UNIT_TIMEX_H -#ifndef __ASSEMBLY__ -#include <linux/irq.h> -#endif /* __ASSEMBLY__ */ - #include <asm/timer-regs.h> #include <unit/clock.h> #include <asm/param.h> diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h index c9aac24..0554ab0 100644 --- a/arch/powerpc/include/asm/hw_irq.h +++ b/arch/powerpc/include/asm/hw_irq.h @@ -86,8 +86,8 @@ static inline bool arch_irqs_disabled(void) } #ifdef CONFIG_PPC_BOOK3E -#define __hard_irq_enable() asm volatile("wrteei 1" : : : "memory"); -#define __hard_irq_disable() asm volatile("wrteei 0" : : : "memory"); +#define __hard_irq_enable() asm volatile("wrteei 1" : : : "memory") +#define __hard_irq_disable() asm volatile("wrteei 0" : : : "memory") #else #define __hard_irq_enable() __mtmsrd(local_paca->kernel_msr | MSR_EE, 1) #define __hard_irq_disable() __mtmsrd(local_paca->kernel_msr, 1) @@ -100,6 +100,14 @@ static inline void hard_irq_disable(void) get_paca()->irq_happened |= PACA_IRQ_HARD_DIS; } +/* include/linux/interrupt.h needs hard_irq_disable to be a macro */ +#define hard_irq_disable hard_irq_disable + +static inline bool lazy_irq_pending(void) +{ + return !!(get_paca()->irq_happened & ~PACA_IRQ_HARD_DIS); +} + /* * This is called by asynchronous interrupts to conditionally * re-enable hard interrupts when soft-disabled after having @@ -117,6 +125,8 @@ static inline bool arch_irq_disabled_regs(struct pt_regs *regs) return !regs->softe; } +extern bool prep_irq_for_idle(void); + #else /* CONFIG_PPC64 */ #define SET_MSR_EE(x) mtmsr(x) diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index ed1718f..5971c85 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -558,27 +558,54 @@ _GLOBAL(ret_from_except_lite) mtmsrd r10,1 /* Update machine state */ #endif /* CONFIG_PPC_BOOK3E */ -#ifdef CONFIG_PREEMPT clrrdi r9,r1,THREAD_SHIFT /* current_thread_info() */ - li r0,_TIF_NEED_RESCHED /* bits to check */ ld r3,_MSR(r1) ld r4,TI_FLAGS(r9) - /* Move MSR_PR bit in r3 to _TIF_SIGPENDING position in r0 */ - rlwimi r0,r3,32+TIF_SIGPENDING-MSR_PR_LG,_TIF_SIGPENDING - and. r0,r4,r0 /* check NEED_RESCHED and maybe SIGPENDING */ - bne do_work - -#else /* !CONFIG_PREEMPT */ - ld r3,_MSR(r1) /* Returning to user mode? */ andi. r3,r3,MSR_PR - beq restore /* if not, just restore regs and return */ + beq resume_kernel /* Check current_thread_info()->flags */ + andi. r0,r4,_TIF_USER_WORK_MASK + beq restore + + andi. r0,r4,_TIF_NEED_RESCHED + beq 1f + bl .restore_interrupts + bl .schedule + b .ret_from_except_lite + +1: bl .save_nvgprs + bl .restore_interrupts + addi r3,r1,STACK_FRAME_OVERHEAD + bl .do_notify_resume + b .ret_from_except + +resume_kernel: +#ifdef CONFIG_PREEMPT + /* Check if we need to preempt */ + andi. r0,r4,_TIF_NEED_RESCHED + beq+ restore + /* Check that preempt_count() == 0 and interrupts are enabled */ + lwz r8,TI_PREEMPT(r9) + cmpwi cr1,r8,0 + ld r0,SOFTE(r1) + cmpdi r0,0 + crandc eq,cr1*4+eq,eq + bne restore + + /* + * Here we are preempting the current task. We want to make + * sure we are soft-disabled first + */ + SOFT_DISABLE_INTS(r3,r4) +1: bl .preempt_schedule_irq + + /* Re-test flags and eventually loop */ clrrdi r9,r1,THREAD_SHIFT ld r4,TI_FLAGS(r9) - andi. r0,r4,_TIF_USER_WORK_MASK - bne do_work -#endif /* !CONFIG_PREEMPT */ + andi. r0,r4,_TIF_NEED_RESCHED + bne 1b +#endif /* CONFIG_PREEMPT */ .globl fast_exc_return_irq fast_exc_return_irq: @@ -759,50 +786,6 @@ restore_check_irq_replay: #endif /* CONFIG_PPC_BOOK3E */ 1: b .ret_from_except /* What else to do here ? */ - - -3: -do_work: -#ifdef CONFIG_PREEMPT - andi. r0,r3,MSR_PR /* Returning to user mode? */ - bne user_work - /* Check that preempt_count() == 0 and interrupts are enabled */ - lwz r8,TI_PREEMPT(r9) - cmpwi cr1,r8,0 - ld r0,SOFTE(r1) - cmpdi r0,0 - crandc eq,cr1*4+eq,eq - bne restore - - /* - * Here we are preempting the current task. We want to make - * sure we are soft-disabled first - */ - SOFT_DISABLE_INTS(r3,r4) -1: bl .preempt_schedule_irq - - /* Re-test flags and eventually loop */ - clrrdi r9,r1,THREAD_SHIFT - ld r4,TI_FLAGS(r9) - andi. r0,r4,_TIF_NEED_RESCHED - bne 1b - b restore - -user_work: -#endif /* CONFIG_PREEMPT */ - - andi. r0,r4,_TIF_NEED_RESCHED - beq 1f - bl .restore_interrupts - bl .schedule - b .ret_from_except_lite - -1: bl .save_nvgprs - bl .restore_interrupts - addi r3,r1,STACK_FRAME_OVERHEAD - bl .do_notify_resume - b .ret_from_except - unrecov_restore: addi r3,r1,STACK_FRAME_OVERHEAD bl .unrecoverable_exception diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 7835a5e..1f017bb 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -229,7 +229,7 @@ notrace void arch_local_irq_restore(unsigned long en) */ if (unlikely(irq_happened != PACA_IRQ_HARD_DIS)) __hard_irq_disable(); -#ifdef CONFIG_TRACE_IRQFLAG +#ifdef CONFIG_TRACE_IRQFLAGS else { /* * We should already be hard disabled here. We had bugs @@ -277,7 +277,7 @@ EXPORT_SYMBOL(arch_local_irq_restore); * NOTE: This is called with interrupts hard disabled but not marked * as such in paca->irq_happened, so we need to resync this. */ -void restore_interrupts(void) +void notrace restore_interrupts(void) { if (irqs_disabled()) { local_paca->irq_happened |= PACA_IRQ_HARD_DIS; @@ -286,6 +286,52 @@ void restore_interrupts(void) __hard_irq_enable(); } +/* + * This is a helper to use when about to go into idle low-power + * when the latter has the side effect of re-enabling interrupts + * (such as calling H_CEDE under pHyp). + * + * You call this function with interrupts soft-disabled (this is + * already the case when ppc_md.power_save is called). The function + * will return whether to enter power save or just return. + * + * In the former case, it will have notified lockdep of interrupts + * being re-enabled and generally sanitized the lazy irq state, + * and in the latter case it will leave with interrupts hard + * disabled and marked as such, so the local_irq_enable() call + * in cpu_idle() will properly re-enable everything. + */ +bool prep_irq_for_idle(void) +{ + /* + * First we need to hard disable to ensure no interrupt + * occurs before we effectively enter the low power state + */ + hard_irq_disable(); + + /* + * If anything happened while we were soft-disabled, + * we return now and do not enter the low power state. + */ + if (lazy_irq_pending()) + return false; + + /* Tell lockdep we are about to re-enable */ + trace_hardirqs_on(); + + /* + * Mark interrupts as soft-enabled and clear the + * PACA_IRQ_HARD_DIS from the pending mask since we + * are about to hard enable as well as a side effect + * of entering the low power state. + */ + local_paca->irq_happened &= ~PACA_IRQ_HARD_DIS; + local_paca->soft_enabled = 1; + + /* Tell the caller to enter the low power state */ + return true; +} + #endif /* CONFIG_PPC64 */ int arch_show_interrupts(struct seq_file *p, int prec) diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 1b488e5..0794a30 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -1312,7 +1312,7 @@ static struct opal_secondary_data { extern char opal_secondary_entry; -static void prom_query_opal(void) +static void __init prom_query_opal(void) { long rc; @@ -1436,7 +1436,7 @@ static void __init prom_opal_hold_cpus(void) prom_debug("prom_opal_hold_cpus: end...\n"); } -static void prom_opal_takeover(void) +static void __init prom_opal_takeover(void) { struct opal_secondary_data *data = &RELOC(opal_secondary_data); struct opal_takeover_args *args = &data->args; diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index c6af1d6..3abe1b86 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -268,24 +268,45 @@ static unsigned long do_h_register_vpa(struct kvm_vcpu *vcpu, return err; } -static void kvmppc_update_vpa(struct kvm *kvm, struct kvmppc_vpa *vpap) +static void kvmppc_update_vpa(struct kvm_vcpu *vcpu, struct kvmppc_vpa *vpap) { + struct kvm *kvm = vcpu->kvm; void *va; unsigned long nb; + unsigned long gpa; - vpap->update_pending = 0; - va = NULL; - if (vpap->next_gpa) { - va = kvmppc_pin_guest_page(kvm, vpap->next_gpa, &nb); - if (nb < vpap->len) { - /* - * If it's now too short, it must be that userspace - * has changed the mappings underlying guest memory, - * so unregister the region. - */ + /* + * We need to pin the page pointed to by vpap->next_gpa, + * but we can't call kvmppc_pin_guest_page under the lock + * as it does get_user_pages() and down_read(). So we + * have to drop the lock, pin the page, then get the lock + * again and check that a new area didn't get registered + * in the meantime. + */ + for (;;) { + gpa = vpap->next_gpa; + spin_unlock(&vcpu->arch.vpa_update_lock); + va = NULL; + nb = 0; + if (gpa) + va = kvmppc_pin_guest_page(kvm, vpap->next_gpa, &nb); + spin_lock(&vcpu->arch.vpa_update_lock); + if (gpa == vpap->next_gpa) + break; + /* sigh... unpin that one and try again */ + if (va) kvmppc_unpin_guest_page(kvm, va); - va = NULL; - } + } + + vpap->update_pending = 0; + if (va && nb < vpap->len) { + /* + * If it's now too short, it must be that userspace + * has changed the mappings underlying guest memory, + * so unregister the region. + */ + kvmppc_unpin_guest_page(kvm, va); + va = NULL; } if (vpap->pinned_addr) kvmppc_unpin_guest_page(kvm, vpap->pinned_addr); @@ -296,20 +317,18 @@ static void kvmppc_update_vpa(struct kvm *kvm, struct kvmppc_vpa *vpap) static void kvmppc_update_vpas(struct kvm_vcpu *vcpu) { - struct kvm *kvm = vcpu->kvm; - spin_lock(&vcpu->arch.vpa_update_lock); if (vcpu->arch.vpa.update_pending) { - kvmppc_update_vpa(kvm, &vcpu->arch.vpa); + kvmppc_update_vpa(vcpu, &vcpu->arch.vpa); init_vpa(vcpu, vcpu->arch.vpa.pinned_addr); } if (vcpu->arch.dtl.update_pending) { - kvmppc_update_vpa(kvm, &vcpu->arch.dtl); + kvmppc_update_vpa(vcpu, &vcpu->arch.dtl); vcpu->arch.dtl_ptr = vcpu->arch.dtl.pinned_addr; vcpu->arch.dtl_index = 0; } if (vcpu->arch.slb_shadow.update_pending) - kvmppc_update_vpa(kvm, &vcpu->arch.slb_shadow); + kvmppc_update_vpa(vcpu, &vcpu->arch.slb_shadow); spin_unlock(&vcpu->arch.vpa_update_lock); } @@ -800,12 +819,39 @@ static int kvmppc_run_core(struct kvmppc_vcore *vc) struct kvm_vcpu *vcpu, *vcpu0, *vnext; long ret; u64 now; - int ptid, i; + int ptid, i, need_vpa_update; /* don't start if any threads have a signal pending */ - list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list) + need_vpa_update = 0; + list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list) { if (signal_pending(vcpu->arch.run_task)) return 0; + need_vpa_update |= vcpu->arch.vpa.update_pending | + vcpu->arch.slb_shadow.update_pending | + vcpu->arch.dtl.update_pending; + } + + /* + * Initialize *vc, in particular vc->vcore_state, so we can + * drop the vcore lock if necessary. + */ + vc->n_woken = 0; + vc->nap_count = 0; + vc->entry_exit_count = 0; + vc->vcore_state = VCORE_RUNNING; + vc->in_guest = 0; + vc->napping_threads = 0; + + /* + * Updating any of the vpas requires calling kvmppc_pin_guest_page, + * which can't be called with any spinlocks held. + */ + if (need_vpa_update) { + spin_unlock(&vc->lock); + list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list) + kvmppc_update_vpas(vcpu); + spin_lock(&vc->lock); + } /* * Make sure we are running on thread 0, and that @@ -838,20 +884,10 @@ static int kvmppc_run_core(struct kvmppc_vcore *vc) if (vcpu->arch.ceded) vcpu->arch.ptid = ptid++; - vc->n_woken = 0; - vc->nap_count = 0; - vc->entry_exit_count = 0; - vc->vcore_state = VCORE_RUNNING; vc->stolen_tb += mftb() - vc->preempt_tb; - vc->in_guest = 0; vc->pcpu = smp_processor_id(); - vc->napping_threads = 0; list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list) { kvmppc_start_thread(vcpu); - if (vcpu->arch.vpa.update_pending || - vcpu->arch.slb_shadow.update_pending || - vcpu->arch.dtl.update_pending) - kvmppc_update_vpas(vcpu); kvmppc_create_dtl_entry(vcpu, vc); } /* Grab any remaining hw threads so they can't go into the kernel */ diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S index a84aafc..a1044f4 100644 --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S @@ -810,7 +810,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201) lwz r3,VCORE_NAPPING_THREADS(r5) lwz r4,VCPU_PTID(r9) li r0,1 - sldi r0,r0,r4 + sld r0,r0,r4 andc. r3,r3,r0 /* no sense IPI'ing ourselves */ beq 43f mulli r4,r4,PACA_SIZE /* get paca for thread 0 */ diff --git a/arch/powerpc/kvm/book3s_pr_papr.c b/arch/powerpc/kvm/book3s_pr_papr.c index 3ff9013..ee02b30 100644 --- a/arch/powerpc/kvm/book3s_pr_papr.c +++ b/arch/powerpc/kvm/book3s_pr_papr.c @@ -241,6 +241,7 @@ int kvmppc_h_pr(struct kvm_vcpu *vcpu, unsigned long cmd) case H_PUT_TCE: return kvmppc_h_pr_put_tce(vcpu); case H_CEDE: + vcpu->arch.shared->msr |= MSR_EE; kvm_vcpu_block(vcpu); clear_bit(KVM_REQ_UNHALT, &vcpu->requests); vcpu->stat.halt_wakeup++; diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index b6edbb3..1e95556 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -635,11 +635,11 @@ static inline int __init read_usm_ranges(const u32 **usm) */ static void __init parse_drconf_memory(struct device_node *memory) { - const u32 *dm, *usm; + const u32 *uninitialized_var(dm), *usm; unsigned int n, rc, ranges, is_kexec_kdump = 0; unsigned long lmb_size, base, size, sz; int nid; - struct assoc_arrays aa; + struct assoc_arrays aa = { .arrays = NULL }; n = of_get_drconf_memory(memory, &dm); if (!n) diff --git a/arch/powerpc/net/bpf_jit_64.S b/arch/powerpc/net/bpf_jit_64.S index 55ba385..7d3a3b5 100644 --- a/arch/powerpc/net/bpf_jit_64.S +++ b/arch/powerpc/net/bpf_jit_64.S @@ -105,6 +105,7 @@ sk_load_byte_msh_positive_offset: mr r4, r_addr; \ li r6, SIZE; \ bl skb_copy_bits; \ + nop; \ /* R3 = 0 on success */ \ addi r1, r1, BPF_PPC_SLOWPATH_FRAME; \ ld r0, 16(r1); \ @@ -156,6 +157,7 @@ bpf_slow_path_byte_msh: mr r4, r_addr; \ li r5, SIZE; \ bl bpf_internal_load_pointer_neg_helper; \ + nop; \ /* R3 != 0 on success */ \ addi r1, r1, BPF_PPC_SLOWPATH_FRAME; \ ld r0, 16(r1); \ diff --git a/arch/powerpc/platforms/cell/pervasive.c b/arch/powerpc/platforms/cell/pervasive.c index efdacc8..d17e98b 100644 --- a/arch/powerpc/platforms/cell/pervasive.c +++ b/arch/powerpc/platforms/cell/pervasive.c @@ -42,11 +42,9 @@ static void cbe_power_save(void) { unsigned long ctrl, thread_switch_control; - /* - * We need to hard disable interrupts, the local_irq_enable() done by - * our caller upon return will hard re-enable. - */ - hard_irq_disable(); + /* Ensure our interrupt state is properly tracked */ + if (!prep_irq_for_idle()) + return; ctrl = mfspr(SPRN_CTRLF); @@ -81,6 +79,9 @@ static void cbe_power_save(void) */ ctrl &= ~(CTRL_RUNLATCH | CTRL_TE); mtspr(SPRN_CTRLT, ctrl); + + /* Re-enable interrupts in MSR */ + __hard_irq_enable(); } static int cbe_system_reset_exception(struct pt_regs *regs) diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index 0915b1a..2d311c0 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -106,7 +106,7 @@ static int tce_build_pSeries(struct iommu_table *tbl, long index, tcep++; } - if (tbl->it_type == TCE_PCI_SWINV_CREATE) + if (tbl->it_type & TCE_PCI_SWINV_CREATE) tce_invalidate_pSeries_sw(tbl, tces, tcep - 1); return 0; } @@ -121,7 +121,7 @@ static void tce_free_pSeries(struct iommu_table *tbl, long index, long npages) while (npages--) *(tcep++) = 0; - if (tbl->it_type == TCE_PCI_SWINV_FREE) + if (tbl->it_type & TCE_PCI_SWINV_FREE) tce_invalidate_pSeries_sw(tbl, tces, tcep - 1); } diff --git a/arch/powerpc/platforms/pseries/nvram.c b/arch/powerpc/platforms/pseries/nvram.c index 36f957f..8733a86 100644 --- a/arch/powerpc/platforms/pseries/nvram.c +++ b/arch/powerpc/platforms/pseries/nvram.c @@ -68,9 +68,7 @@ static const char *pseries_nvram_os_partitions[] = { }; static void oops_to_nvram(struct kmsg_dumper *dumper, - enum kmsg_dump_reason reason, - const char *old_msgs, unsigned long old_len, - const char *new_msgs, unsigned long new_len); + enum kmsg_dump_reason reason); static struct kmsg_dumper nvram_kmsg_dumper = { .dump = oops_to_nvram @@ -504,28 +502,6 @@ int __init pSeries_nvram_init(void) } /* - * Try to capture the last capture_len bytes of the printk buffer. Return - * the amount actually captured. - */ -static size_t capture_last_msgs(const char *old_msgs, size_t old_len, - const char *new_msgs, size_t new_len, - char *captured, size_t capture_len) -{ - if (new_len >= capture_len) { - memcpy(captured, new_msgs + (new_len - capture_len), - capture_len); - return capture_len; - } else { - /* Grab the end of old_msgs. */ - size_t old_tail_len = min(old_len, capture_len - new_len); - memcpy(captured, old_msgs + (old_len - old_tail_len), - old_tail_len); - memcpy(captured + old_tail_len, new_msgs, new_len); - return old_tail_len + new_len; - } -} - -/* * Are we using the ibm,rtas-log for oops/panic reports? And if so, * would logging this oops/panic overwrite an RTAS event that rtas_errd * hasn't had a chance to read and process? Return 1 if so, else 0. @@ -541,27 +517,6 @@ static int clobbering_unread_rtas_event(void) NVRAM_RTAS_READ_TIMEOUT); } -/* Squeeze out each line's <n> severity prefix. */ -static size_t elide_severities(char *buf, size_t len) -{ - char *in, *out, *buf_end = buf + len; - /* Assume a <n> at the very beginning marks the start of a line. */ - int newline = 1; - - in = out = buf; - while (in < buf_end) { - if (newline && in+3 <= buf_end && - *in == '<' && isdigit(in[1]) && in[2] == '>') { - in += 3; - newline = 0; - } else { - newline = (*in == '\n'); - *out++ = *in++; - } - } - return out - buf; -} - /* Derived from logfs_compress() */ static int nvram_compress(const void *in, void *out, size_t inlen, size_t outlen) @@ -619,9 +574,7 @@ static int zip_oops(size_t text_len) * partition. If that's too much, go back and capture uncompressed text. */ static void oops_to_nvram(struct kmsg_dumper *dumper, - enum kmsg_dump_reason reason, - const char *old_msgs, unsigned long old_len, - const char *new_msgs, unsigned long new_len) + enum kmsg_dump_reason reason) { static unsigned int oops_count = 0; static bool panicking = false; @@ -660,14 +613,14 @@ static void oops_to_nvram(struct kmsg_dumper *dumper, return; if (big_oops_buf) { - text_len = capture_last_msgs(old_msgs, old_len, - new_msgs, new_len, big_oops_buf, big_oops_buf_sz); - text_len = elide_severities(big_oops_buf, text_len); + kmsg_dump_get_buffer(dumper, false, + big_oops_buf, big_oops_buf_sz, &text_len); rc = zip_oops(text_len); } if (rc != 0) { - text_len = capture_last_msgs(old_msgs, old_len, - new_msgs, new_len, oops_data, oops_data_sz); + kmsg_dump_rewind(dumper); + kmsg_dump_get_buffer(dumper, true, + oops_data, oops_data_sz, &text_len); err_type = ERR_TYPE_KERNEL_PANIC; *oops_len = (u16) text_len; } diff --git a/arch/powerpc/platforms/pseries/processor_idle.c b/arch/powerpc/platforms/pseries/processor_idle.c index 41a34bc..c71be66 100644 --- a/arch/powerpc/platforms/pseries/processor_idle.c +++ b/arch/powerpc/platforms/pseries/processor_idle.c @@ -99,15 +99,18 @@ out: static void check_and_cede_processor(void) { /* - * Interrupts are soft-disabled at this point, - * but not hard disabled. So an interrupt might have - * occurred before entering NAP, and would be potentially - * lost (edge events, decrementer events, etc...) unless - * we first hard disable then check. + * Ensure our interrupt state is properly tracked, + * also checks if no interrupt has occurred while we + * were soft-disabled */ - hard_irq_disable(); - if (get_paca()->irq_happened == 0) + if (prep_irq_for_idle()) { cede_processor(); +#ifdef CONFIG_TRACE_IRQFLAGS + /* Ensure that H_CEDE returns with IRQs on */ + if (WARN_ON(!(mfmsr() & MSR_EE))) + __hard_irq_enable(); +#endif + } } static int dedicated_cede_loop(struct cpuidle_device *dev, diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 0f3ab06..eab3492 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -971,7 +971,7 @@ static int cpu_cmd(void) /* print cpus waiting or in xmon */ printf("cpus stopped:"); count = 0; - for (cpu = 0; cpu < NR_CPUS; ++cpu) { + for_each_possible_cpu(cpu) { if (cpumask_test_cpu(cpu, &cpus_in_xmon)) { if (count == 0) printf(" %x", cpu); diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 99bcd0e..31d9db7 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -32,6 +32,8 @@ config SUPERH select GENERIC_SMP_IDLE_THREAD select GENERIC_CLOCKEVENTS select GENERIC_CMOS_UPDATE if SH_SH03 || SH_DREAMCAST + select GENERIC_STRNCPY_FROM_USER + select GENERIC_STRNLEN_USER help The SuperH is a RISC processor targeted for use in embedded systems and consumer electronics; it was also used in the Sega Dreamcast diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 46edf07..aed701c 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -9,6 +9,12 @@ # License. See the file "COPYING" in the main directory of this archive # for more details. # +ifneq ($(SUBARCH),$(ARCH)) + ifeq ($(CROSS_COMPILE),) + CROSS_COMPILE := $(call cc-cross-prefix, $(UTS_MACHINE)-linux- $(UTS_MACHINE)-linux-gnu- $(UTS_MACHINE)-unknown-linux-gnu-) + endif +endif + isa-y := any isa-$(CONFIG_SH_DSP) := sh isa-$(CONFIG_CPU_SH2) := sh2 @@ -106,19 +112,13 @@ LDFLAGS_vmlinux += --defsym phys_stext=_stext-$(CONFIG_PAGE_OFFSET) \ KBUILD_DEFCONFIG := cayman_defconfig endif -ifneq ($(SUBARCH),$(ARCH)) - ifeq ($(CROSS_COMPILE),) - CROSS_COMPILE := $(call cc-cross-prefix, $(UTS_MACHINE)-linux- $(UTS_MACHINE)-linux-gnu- $(UTS_MACHINE)-unknown-linux-gnu-) - endif -endif - ifdef CONFIG_CPU_LITTLE_ENDIAN ld-bfd := elf32-$(UTS_MACHINE)-linux -LDFLAGS_vmlinux += --defsym 'jiffies=jiffies_64' --oformat $(ld-bfd) +LDFLAGS_vmlinux += --defsym jiffies=jiffies_64 --oformat $(ld-bfd) LDFLAGS += -EL else ld-bfd := elf32-$(UTS_MACHINE)big-linux -LDFLAGS_vmlinux += --defsym 'jiffies=jiffies_64+4' --oformat $(ld-bfd) +LDFLAGS_vmlinux += --defsym jiffies=jiffies_64+4 --oformat $(ld-bfd) LDFLAGS += -EB endif diff --git a/arch/sh/boards/mach-kfr2r09/setup.c b/arch/sh/boards/mach-kfr2r09/setup.c index 158c917..43a179c 100644 --- a/arch/sh/boards/mach-kfr2r09/setup.c +++ b/arch/sh/boards/mach-kfr2r09/setup.c @@ -201,8 +201,8 @@ static struct resource kfr2r09_usb0_gadget_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = evtirq(0xa20), - .end = evtirq(0xa20), + .start = evt2irq(0xa20), + .end = evt2irq(0xa20), .flags = IORESOURCE_IRQ | IRQF_TRIGGER_LOW, }, }; diff --git a/arch/sh/drivers/pci/pcie-sh7786.c b/arch/sh/drivers/pci/pcie-sh7786.c index c045142..9e702f2 100644 --- a/arch/sh/drivers/pci/pcie-sh7786.c +++ b/arch/sh/drivers/pci/pcie-sh7786.c @@ -239,7 +239,7 @@ static int __init pcie_clk_init(struct sh7786_pcie_port *port) clk->enable_reg = (void __iomem *)(chan->reg_base + SH4A_PCIEPHYCTLR); clk->enable_bit = BITS_CKE; - ret = sh_clk_mstp32_register(clk, 1); + ret = sh_clk_mstp_register(clk, 1); if (unlikely(ret < 0)) goto err_phy; diff --git a/arch/sh/include/asm/Kbuild b/arch/sh/include/asm/Kbuild index 7beb423..7b673dd 100644 --- a/arch/sh/include/asm/Kbuild +++ b/arch/sh/include/asm/Kbuild @@ -1,5 +1,39 @@ include include/asm-generic/Kbuild.asm +generic-y += bitsperlong.h +generic-y += cputime.h +generic-y += current.h +generic-y += delay.h +generic-y += div64.h +generic-y += emergency-restart.h +generic-y += errno.h +generic-y += fcntl.h +generic-y += ioctl.h +generic-y += ipcbuf.h +generic-y += irq_regs.h +generic-y += kvm_para.h +generic-y += local.h +generic-y += local64.h +generic-y += param.h +generic-y += parport.h +generic-y += percpu.h +generic-y += poll.h +generic-y += mman.h +generic-y += msgbuf.h +generic-y += resource.h +generic-y += scatterlist.h +generic-y += sembuf.h +generic-y += serial.h +generic-y += shmbuf.h +generic-y += siginfo.h +generic-y += sizes.h +generic-y += socket.h +generic-y += statfs.h +generic-y += termbits.h +generic-y += termios.h +generic-y += ucontext.h +generic-y += xor.h + header-y += cachectl.h header-y += cpu-features.h header-y += hw_breakpoint.h diff --git a/arch/sh/include/asm/bitsperlong.h b/arch/sh/include/asm/bitsperlong.h deleted file mode 100644 index 6dc0bb0..0000000 --- a/arch/sh/include/asm/bitsperlong.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/bitsperlong.h> diff --git a/arch/sh/include/asm/cputime.h b/arch/sh/include/asm/cputime.h deleted file mode 100644 index 6ca395d..0000000 --- a/arch/sh/include/asm/cputime.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __SH_CPUTIME_H -#define __SH_CPUTIME_H - -#include <asm-generic/cputime.h> - -#endif /* __SH_CPUTIME_H */ diff --git a/arch/sh/include/asm/current.h b/arch/sh/include/asm/current.h deleted file mode 100644 index 4c51401..0000000 --- a/arch/sh/include/asm/current.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/current.h> diff --git a/arch/sh/include/asm/delay.h b/arch/sh/include/asm/delay.h deleted file mode 100644 index 9670e12..0000000 --- a/arch/sh/include/asm/delay.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/delay.h> diff --git a/arch/sh/include/asm/div64.h b/arch/sh/include/asm/div64.h deleted file mode 100644 index 6cd978c..0000000 --- a/arch/sh/include/asm/div64.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/div64.h> diff --git a/arch/sh/include/asm/emergency-restart.h b/arch/sh/include/asm/emergency-restart.h deleted file mode 100644 index 108d8c4..0000000 --- a/arch/sh/include/asm/emergency-restart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_EMERGENCY_RESTART_H -#define _ASM_EMERGENCY_RESTART_H - -#include <asm-generic/emergency-restart.h> - -#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/arch/sh/include/asm/errno.h b/arch/sh/include/asm/errno.h deleted file mode 100644 index 51cf6f9..0000000 --- a/arch/sh/include/asm/errno.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_SH_ERRNO_H -#define __ASM_SH_ERRNO_H - -#include <asm-generic/errno.h> - -#endif /* __ASM_SH_ERRNO_H */ diff --git a/arch/sh/include/asm/fcntl.h b/arch/sh/include/asm/fcntl.h deleted file mode 100644 index 46ab12d..0000000 --- a/arch/sh/include/asm/fcntl.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/fcntl.h> diff --git a/arch/sh/include/asm/io_noioport.h b/arch/sh/include/asm/io_noioport.h index e136d28..4d48f14 100644 --- a/arch/sh/include/asm/io_noioport.h +++ b/arch/sh/include/asm/io_noioport.h @@ -19,9 +19,20 @@ static inline u32 inl(unsigned long addr) return -1; } -#define outb(x, y) BUG() -#define outw(x, y) BUG() -#define outl(x, y) BUG() +static inline void outb(unsigned char x, unsigned long port) +{ + BUG(); +} + +static inline void outw(unsigned short x, unsigned long port) +{ + BUG(); +} + +static inline void outl(unsigned int x, unsigned long port) +{ + BUG(); +} #define inb_p(addr) inb(addr) #define inw_p(addr) inw(addr) diff --git a/arch/sh/include/asm/ioctl.h b/arch/sh/include/asm/ioctl.h deleted file mode 100644 index b279fe0..0000000 --- a/arch/sh/include/asm/ioctl.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/ioctl.h> diff --git a/arch/sh/include/asm/ipcbuf.h b/arch/sh/include/asm/ipcbuf.h deleted file mode 100644 index 84c7e51..0000000 --- a/arch/sh/include/asm/ipcbuf.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/ipcbuf.h> diff --git a/arch/sh/include/asm/irq_regs.h b/arch/sh/include/asm/irq_regs.h deleted file mode 100644 index 3dd9c0b..0000000 --- a/arch/sh/include/asm/irq_regs.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/irq_regs.h> diff --git a/arch/sh/include/asm/kvm_para.h b/arch/sh/include/asm/kvm_para.h deleted file mode 100644 index 14fab8f..0000000 --- a/arch/sh/include/asm/kvm_para.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/kvm_para.h> diff --git a/arch/sh/include/asm/local.h b/arch/sh/include/asm/local.h deleted file mode 100644 index 9ed9b9c..0000000 --- a/arch/sh/include/asm/local.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_SH_LOCAL_H -#define __ASM_SH_LOCAL_H - -#include <asm-generic/local.h> - -#endif /* __ASM_SH_LOCAL_H */ - diff --git a/arch/sh/include/asm/local64.h b/arch/sh/include/asm/local64.h deleted file mode 100644 index 36c93b5..0000000 --- a/arch/sh/include/asm/local64.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/local64.h> diff --git a/arch/sh/include/asm/mman.h b/arch/sh/include/asm/mman.h deleted file mode 100644 index 8eebf89..0000000 --- a/arch/sh/include/asm/mman.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/mman.h> diff --git a/arch/sh/include/asm/msgbuf.h b/arch/sh/include/asm/msgbuf.h deleted file mode 100644 index 809134c..0000000 --- a/arch/sh/include/asm/msgbuf.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/msgbuf.h> diff --git a/arch/sh/include/asm/param.h b/arch/sh/include/asm/param.h deleted file mode 100644 index 965d454..0000000 --- a/arch/sh/include/asm/param.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/param.h> diff --git a/arch/sh/include/asm/parport.h b/arch/sh/include/asm/parport.h deleted file mode 100644 index cf252af..0000000 --- a/arch/sh/include/asm/parport.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/parport.h> diff --git a/arch/sh/include/asm/percpu.h b/arch/sh/include/asm/percpu.h deleted file mode 100644 index 4db4b39..0000000 --- a/arch/sh/include/asm/percpu.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ARCH_SH_PERCPU -#define __ARCH_SH_PERCPU - -#include <asm-generic/percpu.h> - -#endif /* __ARCH_SH_PERCPU */ diff --git a/arch/sh/include/asm/poll.h b/arch/sh/include/asm/poll.h deleted file mode 100644 index c98509d..0000000 --- a/arch/sh/include/asm/poll.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/poll.h> diff --git a/arch/sh/include/asm/resource.h b/arch/sh/include/asm/resource.h deleted file mode 100644 index 9c2499a..0000000 --- a/arch/sh/include/asm/resource.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_SH_RESOURCE_H -#define __ASM_SH_RESOURCE_H - -#include <asm-generic/resource.h> - -#endif /* __ASM_SH_RESOURCE_H */ diff --git a/arch/sh/include/asm/scatterlist.h b/arch/sh/include/asm/scatterlist.h deleted file mode 100644 index 98dfc35..0000000 --- a/arch/sh/include/asm/scatterlist.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_SH_SCATTERLIST_H -#define __ASM_SH_SCATTERLIST_H - -#include <asm-generic/scatterlist.h> - -#endif /* __ASM_SH_SCATTERLIST_H */ diff --git a/arch/sh/include/asm/sembuf.h b/arch/sh/include/asm/sembuf.h deleted file mode 100644 index 7673b83..0000000 --- a/arch/sh/include/asm/sembuf.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/sembuf.h> diff --git a/arch/sh/include/asm/serial.h b/arch/sh/include/asm/serial.h deleted file mode 100644 index a0cb0caf..0000000 --- a/arch/sh/include/asm/serial.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/serial.h> diff --git a/arch/sh/include/asm/shmbuf.h b/arch/sh/include/asm/shmbuf.h deleted file mode 100644 index 83c05fc..0000000 --- a/arch/sh/include/asm/shmbuf.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/shmbuf.h> diff --git a/arch/sh/include/asm/siginfo.h b/arch/sh/include/asm/siginfo.h deleted file mode 100644 index 813040e..0000000 --- a/arch/sh/include/asm/siginfo.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_SH_SIGINFO_H -#define __ASM_SH_SIGINFO_H - -#include <asm-generic/siginfo.h> - -#endif /* __ASM_SH_SIGINFO_H */ diff --git a/arch/sh/include/asm/sizes.h b/arch/sh/include/asm/sizes.h deleted file mode 100644 index dd248c2..0000000 --- a/arch/sh/include/asm/sizes.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/sizes.h> diff --git a/arch/sh/include/asm/socket.h b/arch/sh/include/asm/socket.h deleted file mode 100644 index 6b71384..0000000 --- a/arch/sh/include/asm/socket.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/socket.h> diff --git a/arch/sh/include/asm/statfs.h b/arch/sh/include/asm/statfs.h deleted file mode 100644 index 9202a02..0000000 --- a/arch/sh/include/asm/statfs.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_SH_STATFS_H -#define __ASM_SH_STATFS_H - -#include <asm-generic/statfs.h> - -#endif /* __ASM_SH_STATFS_H */ diff --git a/arch/sh/include/asm/termbits.h b/arch/sh/include/asm/termbits.h deleted file mode 100644 index 3935b10..0000000 --- a/arch/sh/include/asm/termbits.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/termbits.h> diff --git a/arch/sh/include/asm/termios.h b/arch/sh/include/asm/termios.h deleted file mode 100644 index 280d78a..0000000 --- a/arch/sh/include/asm/termios.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/termios.h> diff --git a/arch/sh/include/asm/uaccess.h b/arch/sh/include/asm/uaccess.h index 050f221..8698a80 100644 --- a/arch/sh/include/asm/uaccess.h +++ b/arch/sh/include/asm/uaccess.h @@ -25,6 +25,8 @@ (__chk_user_ptr(addr), \ __access_ok((unsigned long __force)(addr), (size))) +#define user_addr_max() (current_thread_info()->addr_limit.seg) + /* * Uh, these should become the main single-value transfer routines ... * They automatically use the right size if we just have the right @@ -100,6 +102,11 @@ struct __large_struct { unsigned long buf[100]; }; # include "uaccess_64.h" #endif +extern long strncpy_from_user(char *dest, const char __user *src, long count); + +extern __must_check long strlen_user(const char __user *str); +extern __must_check long strnlen_user(const char __user *str, long n); + /* Generic arbitrary sized copy. */ /* Return the number of bytes NOT copied */ __kernel_size_t __copy_user(void *to, const void *from, __kernel_size_t n); @@ -137,37 +144,6 @@ __kernel_size_t __clear_user(void *addr, __kernel_size_t size); __cl_size; \ }) -/** - * strncpy_from_user: - Copy a NUL terminated string from userspace. - * @dst: Destination address, in kernel space. This buffer must be at - * least @count bytes long. - * @src: Source address, in user space. - * @count: Maximum number of bytes to copy, including the trailing NUL. - * - * Copies a NUL-terminated string from userspace to kernel space. - * - * On success, returns the length of the string (not including the trailing - * NUL). - * - * If access to userspace fails, returns -EFAULT (some data may have been - * copied). - * - * If @count is smaller than the length of the string, copies @count bytes - * and returns @count. - */ -#define strncpy_from_user(dest,src,count) \ -({ \ - unsigned long __sfu_src = (unsigned long)(src); \ - int __sfu_count = (int)(count); \ - long __sfu_res = -EFAULT; \ - \ - if (__access_ok(__sfu_src, __sfu_count)) \ - __sfu_res = __strncpy_from_user((unsigned long)(dest), \ - __sfu_src, __sfu_count); \ - \ - __sfu_res; \ -}) - static inline unsigned long copy_from_user(void *to, const void __user *from, unsigned long n) { @@ -192,43 +168,6 @@ copy_to_user(void __user *to, const void *from, unsigned long n) return __copy_size; } -/** - * strnlen_user: - Get the size of a string in user space. - * @s: The string to measure. - * @n: The maximum valid length - * - * Context: User context only. This function may sleep. - * - * Get the size of a NUL-terminated string in user space. - * - * Returns the size of the string INCLUDING the terminating NUL. - * On exception, returns 0. - * If the string is too long, returns a value greater than @n. - */ -static inline long strnlen_user(const char __user *s, long n) -{ - if (!__addr_ok(s)) - return 0; - else - return __strnlen_user(s, n); -} - -/** - * strlen_user: - Get the size of a string in user space. - * @str: The string to measure. - * - * Context: User context only. This function may sleep. - * - * Get the size of a NUL-terminated string in user space. - * - * Returns the size of the string INCLUDING the terminating NUL. - * On exception, returns 0. - * - * If there is a limit on the length of a valid string, you may wish to - * consider using strnlen_user() instead. - */ -#define strlen_user(str) strnlen_user(str, ~0UL >> 1) - /* * The exception table consists of pairs of addresses: the first is the * address of an instruction that is allowed to fault, and the second is diff --git a/arch/sh/include/asm/uaccess_32.h b/arch/sh/include/asm/uaccess_32.h index ae0d24f..c0de7ee 100644 --- a/arch/sh/include/asm/uaccess_32.h +++ b/arch/sh/include/asm/uaccess_32.h @@ -170,79 +170,4 @@ __asm__ __volatile__( \ extern void __put_user_unknown(void); -static inline int -__strncpy_from_user(unsigned long __dest, unsigned long __user __src, int __count) -{ - __kernel_size_t res; - unsigned long __dummy, _d, _s, _c; - - __asm__ __volatile__( - "9:\n" - "mov.b @%2+, %1\n\t" - "cmp/eq #0, %1\n\t" - "bt/s 2f\n" - "1:\n" - "mov.b %1, @%3\n\t" - "dt %4\n\t" - "bf/s 9b\n\t" - " add #1, %3\n\t" - "2:\n\t" - "sub %4, %0\n" - "3:\n" - ".section .fixup,\"ax\"\n" - "4:\n\t" - "mov.l 5f, %1\n\t" - "jmp @%1\n\t" - " mov %9, %0\n\t" - ".balign 4\n" - "5: .long 3b\n" - ".previous\n" - ".section __ex_table,\"a\"\n" - " .balign 4\n" - " .long 9b,4b\n" - ".previous" - : "=r" (res), "=&z" (__dummy), "=r" (_s), "=r" (_d), "=r"(_c) - : "0" (__count), "2" (__src), "3" (__dest), "4" (__count), - "i" (-EFAULT) - : "memory", "t"); - - return res; -} - -/* - * Return the size of a string (including the ending 0 even when we have - * exceeded the maximum string length). - */ -static inline long __strnlen_user(const char __user *__s, long __n) -{ - unsigned long res; - unsigned long __dummy; - - __asm__ __volatile__( - "1:\t" - "mov.b @(%0,%3), %1\n\t" - "cmp/eq %4, %0\n\t" - "bt/s 2f\n\t" - " add #1, %0\n\t" - "tst %1, %1\n\t" - "bf 1b\n\t" - "2:\n" - ".section .fixup,\"ax\"\n" - "3:\n\t" - "mov.l 4f, %1\n\t" - "jmp @%1\n\t" - " mov #0, %0\n" - ".balign 4\n" - "4: .long 2b\n" - ".previous\n" - ".section __ex_table,\"a\"\n" - " .balign 4\n" - " .long 1b,3b\n" - ".previous" - : "=z" (res), "=&r" (__dummy) - : "0" (0), "r" (__s), "r" (__n) - : "t"); - return res; -} - #endif /* __ASM_SH_UACCESS_32_H */ diff --git a/arch/sh/include/asm/uaccess_64.h b/arch/sh/include/asm/uaccess_64.h index 56fd20b..2e07e0f 100644 --- a/arch/sh/include/asm/uaccess_64.h +++ b/arch/sh/include/asm/uaccess_64.h @@ -84,8 +84,4 @@ extern long __put_user_asm_l(void *, long); extern long __put_user_asm_q(void *, long); extern void __put_user_unknown(void); -extern long __strnlen_user(const char *__s, long __n); -extern int __strncpy_from_user(unsigned long __dest, - unsigned long __user __src, int __count); - #endif /* __ASM_SH_UACCESS_64_H */ diff --git a/arch/sh/include/asm/ucontext.h b/arch/sh/include/asm/ucontext.h deleted file mode 100644 index 9bc07b9..0000000 --- a/arch/sh/include/asm/ucontext.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/ucontext.h> diff --git a/arch/sh/include/asm/word-at-a-time.h b/arch/sh/include/asm/word-at-a-time.h new file mode 100644 index 0000000..6e38953 --- /dev/null +++ b/arch/sh/include/asm/word-at-a-time.h @@ -0,0 +1,53 @@ +#ifndef __ASM_SH_WORD_AT_A_TIME_H +#define __ASM_SH_WORD_AT_A_TIME_H + +#ifdef CONFIG_CPU_BIG_ENDIAN +# include <asm-generic/word-at-a-time.h> +#else +/* + * Little-endian version cribbed from x86. + */ +struct word_at_a_time { + const unsigned long one_bits, high_bits; +}; + +#define WORD_AT_A_TIME_CONSTANTS { REPEAT_BYTE(0x01), REPEAT_BYTE(0x80) } + +/* Carl Chatfield / Jan Achrenius G+ version for 32-bit */ +static inline long count_masked_bytes(long mask) +{ + /* (000000 0000ff 00ffff ffffff) -> ( 1 1 2 3 ) */ + long a = (0x0ff0001+mask) >> 23; + /* Fix the 1 for 00 case */ + return a & mask; +} + +/* Return nonzero if it has a zero */ +static inline unsigned long has_zero(unsigned long a, unsigned long *bits, const struct word_at_a_time *c) +{ + unsigned long mask = ((a - c->one_bits) & ~a) & c->high_bits; + *bits = mask; + return mask; +} + +static inline unsigned long prep_zero_mask(unsigned long a, unsigned long bits, const struct word_at_a_time *c) +{ + return bits; +} + +static inline unsigned long create_zero_mask(unsigned long bits) +{ + bits = (bits - 1) & ~bits; + return bits >> 7; +} + +/* The mask we created is directly usable as a bytemask */ +#define zero_bytemask(mask) (mask) + +static inline unsigned long find_zero(unsigned long mask) +{ + return count_masked_bytes(mask); +} +#endif + +#endif diff --git a/arch/sh/include/asm/xor.h b/arch/sh/include/asm/xor.h deleted file mode 100644 index c82eb12..0000000 --- a/arch/sh/include/asm/xor.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/xor.h> diff --git a/arch/sh/include/cpu-sh2a/cpu/ubc.h b/arch/sh/include/cpu-sh2a/cpu/ubc.h deleted file mode 100644 index 1192e1c..0000000 --- a/arch/sh/include/cpu-sh2a/cpu/ubc.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * SH-2A UBC definitions - * - * Copyright (C) 2008 Kieran Bingham - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef __ASM_CPU_SH2A_UBC_H -#define __ASM_CPU_SH2A_UBC_H - -#define UBC_BARA 0xfffc0400 -#define UBC_BAMRA 0xfffc0404 -#define UBC_BBRA 0xfffc04a0 /* 16 bit access */ -#define UBC_BDRA 0xfffc0408 -#define UBC_BDMRA 0xfffc040c - -#define UBC_BARB 0xfffc0410 -#define UBC_BAMRB 0xfffc0414 -#define UBC_BBRB 0xfffc04b0 /* 16 bit access */ -#define UBC_BDRB 0xfffc0418 -#define UBC_BDMRB 0xfffc041c - -#define UBC_BRCR 0xfffc04c0 - -#endif /* __ASM_CPU_SH2A_UBC_H */ diff --git a/arch/sh/kernel/cpu/sh3/serial-sh7720.c b/arch/sh/kernel/cpu/sh3/serial-sh7720.c index 8832c52..c4a0336 100644 --- a/arch/sh/kernel/cpu/sh3/serial-sh7720.c +++ b/arch/sh/kernel/cpu/sh3/serial-sh7720.c @@ -2,7 +2,7 @@ #include <linux/serial_core.h> #include <linux/io.h> #include <cpu/serial.h> -#include <asm/gpio.h> +#include <cpu/gpio.h> static void sh7720_sci_init_pins(struct uart_port *port, unsigned int cflag) { diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c index ea01a72..53638e2 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7343.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7343.c @@ -283,7 +283,7 @@ int __init arch_clk_init(void) ret = sh_clk_div6_register(div6_clks, DIV6_NR); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); return ret; } diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7366.c b/arch/sh/kernel/cpu/sh4a/clock-sh7366.c index 7ac07b4..22e485d 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7366.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7366.c @@ -276,7 +276,7 @@ int __init arch_clk_init(void) ret = sh_clk_div6_register(div6_clks, DIV6_NR); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); return ret; } diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c index 8e1f970..c4cb740 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7722.c @@ -261,7 +261,7 @@ int __init arch_clk_init(void) ret = sh_clk_div6_register(div6_clks, DIV6_NR); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, HWBLK_NR); + ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR); return ret; } diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c index 35f75cf..37c41c7 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7723.c @@ -311,7 +311,7 @@ int __init arch_clk_init(void) ret = sh_clk_div6_register(div6_clks, DIV6_NR); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, HWBLK_NR); + ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR); return ret; } diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c index 2a87901..c87e78f 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c @@ -375,7 +375,7 @@ int __init arch_clk_init(void) ret = sh_clk_div6_reparent_register(div6_clks, DIV6_NR); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, HWBLK_NR); + ret = sh_clk_mstp_register(mstp_clks, HWBLK_NR); return ret; } diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7734.c b/arch/sh/kernel/cpu/sh4a/clock-sh7734.c index 1697642..deb683a 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7734.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7734.c @@ -260,7 +260,7 @@ int __init arch_clk_init(void) &div4_table); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); return ret; } diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c index 04ab5ae..e84a432 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7757.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7757.c @@ -148,7 +148,7 @@ int __init arch_clk_init(void) ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks), &div4_table); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); return ret; } diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c index ab1c58f..1c83788 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7785.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7785.c @@ -175,7 +175,7 @@ int __init arch_clk_init(void) ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks), &div4_table); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); return ret; } diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7786.c b/arch/sh/kernel/cpu/sh4a/clock-sh7786.c index 4917094..8bba6f1 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7786.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7786.c @@ -194,7 +194,7 @@ int __init arch_clk_init(void) ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks), &div4_table); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); return ret; } diff --git a/arch/sh/kernel/cpu/sh4a/clock-shx3.c b/arch/sh/kernel/cpu/sh4a/clock-shx3.c index 0f11b39..a9422da 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-shx3.c +++ b/arch/sh/kernel/cpu/sh4a/clock-shx3.c @@ -149,7 +149,7 @@ int __init arch_clk_init(void) ret = sh_clk_div4_register(div4_clks, ARRAY_SIZE(div4_clks), &div4_table); if (!ret) - ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + ret = sh_clk_mstp_register(mstp_clks, MSTP_NR); return ret; } diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S index ff1f0e6..b7cf6a5 100644 --- a/arch/sh/kernel/cpu/sh5/entry.S +++ b/arch/sh/kernel/cpu/sh5/entry.S @@ -1569,86 +1569,6 @@ ___clear_user_exit: #endif /* CONFIG_MMU */ /* - * int __strncpy_from_user(unsigned long __dest, unsigned long __src, - * int __count) - * - * Inputs: - * (r2) target address - * (r3) source address - * (r4) maximum size in bytes - * - * Ouputs: - * (*r2) copied data - * (r2) -EFAULT (in case of faulting) - * copied data (otherwise) - */ - .global __strncpy_from_user -__strncpy_from_user: - pta ___strncpy_from_user1, tr0 - pta ___strncpy_from_user_done, tr1 - or r4, ZERO, r5 /* r5 = original count */ - beq/u r4, r63, tr1 /* early exit if r4==0 */ - movi -(EFAULT), r6 /* r6 = reply, no real fixup */ - or ZERO, ZERO, r7 /* r7 = data, clear top byte of data */ - -___strncpy_from_user1: - ld.b r3, 0, r7 /* Fault address: only in reading */ - st.b r2, 0, r7 - addi r2, 1, r2 - addi r3, 1, r3 - beq/u ZERO, r7, tr1 - addi r4, -1, r4 /* return real number of copied bytes */ - bne/l ZERO, r4, tr0 - -___strncpy_from_user_done: - sub r5, r4, r6 /* If done, return copied */ - -___strncpy_from_user_exit: - or r6, ZERO, r2 - ptabs LINK, tr0 - blink tr0, ZERO - -/* - * extern long __strnlen_user(const char *__s, long __n) - * - * Inputs: - * (r2) source address - * (r3) source size in bytes - * - * Ouputs: - * (r2) -EFAULT (in case of faulting) - * string length (otherwise) - */ - .global __strnlen_user -__strnlen_user: - pta ___strnlen_user_set_reply, tr0 - pta ___strnlen_user1, tr1 - or ZERO, ZERO, r5 /* r5 = counter */ - movi -(EFAULT), r6 /* r6 = reply, no real fixup */ - or ZERO, ZERO, r7 /* r7 = data, clear top byte of data */ - beq r3, ZERO, tr0 - -___strnlen_user1: - ldx.b r2, r5, r7 /* Fault address: only in reading */ - addi r3, -1, r3 /* No real fixup */ - addi r5, 1, r5 - beq r3, ZERO, tr0 - bne r7, ZERO, tr1 -! The line below used to be active. This meant led to a junk byte lying between each pair -! of entries in the argv & envp structures in memory. Whilst the program saw the right data -! via the argv and envp arguments to main, it meant the 'flat' representation visible through -! /proc/$pid/cmdline was corrupt, causing trouble with ps, for example. -! addi r5, 1, r5 /* Include '\0' */ - -___strnlen_user_set_reply: - or r5, ZERO, r6 /* If done, return counter */ - -___strnlen_user_exit: - or r6, ZERO, r2 - ptabs LINK, tr0 - blink tr0, ZERO - -/* * extern long __get_user_asm_?(void *val, long addr) * * Inputs: @@ -1982,8 +1902,6 @@ asm_uaccess_start: .long ___copy_user2, ___copy_user_exit .long ___clear_user1, ___clear_user_exit #endif - .long ___strncpy_from_user1, ___strncpy_from_user_exit - .long ___strnlen_user1, ___strnlen_user_exit .long ___get_user_asm_b1, ___get_user_asm_b_exit .long ___get_user_asm_w1, ___get_user_asm_w_exit .long ___get_user_asm_l1, ___get_user_asm_l_exit diff --git a/arch/sh/kernel/process.c b/arch/sh/kernel/process.c index 9b7a459..055d91b 100644 --- a/arch/sh/kernel/process.c +++ b/arch/sh/kernel/process.c @@ -4,6 +4,7 @@ #include <linux/sched.h> #include <linux/export.h> #include <linux/stackprotector.h> +#include <asm/fpu.h> struct kmem_cache *task_xstate_cachep = NULL; unsigned int xstate_size; diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c index 4264583e..602545b 100644 --- a/arch/sh/kernel/process_64.c +++ b/arch/sh/kernel/process_64.c @@ -33,6 +33,7 @@ #include <asm/switch_to.h> struct task_struct *last_task_used_math = NULL; +struct pt_regs fake_swapper_regs = { 0, }; void show_regs(struct pt_regs *regs) { diff --git a/arch/sh/kernel/sh_ksyms_64.c b/arch/sh/kernel/sh_ksyms_64.c index 45afa5c..26a0774 100644 --- a/arch/sh/kernel/sh_ksyms_64.c +++ b/arch/sh/kernel/sh_ksyms_64.c @@ -32,8 +32,6 @@ EXPORT_SYMBOL(__get_user_asm_b); EXPORT_SYMBOL(__get_user_asm_w); EXPORT_SYMBOL(__get_user_asm_l); EXPORT_SYMBOL(__get_user_asm_q); -EXPORT_SYMBOL(__strnlen_user); -EXPORT_SYMBOL(__strncpy_from_user); EXPORT_SYMBOL(__clear_user); EXPORT_SYMBOL(copy_page); EXPORT_SYMBOL(__copy_user); diff --git a/arch/sparc/include/asm/cmt.h b/arch/sparc/include/asm/cmt.h deleted file mode 100644 index 870db59..0000000 --- a/arch/sparc/include/asm/cmt.h +++ /dev/null @@ -1,59 +0,0 @@ -#ifndef _SPARC64_CMT_H -#define _SPARC64_CMT_H - -/* cmt.h: Chip Multi-Threading register definitions - * - * Copyright (C) 2004 David S. Miller (davem@redhat.com) - */ - -/* ASI_CORE_ID - private */ -#define LP_ID 0x0000000000000010UL -#define LP_ID_MAX 0x00000000003f0000UL -#define LP_ID_ID 0x000000000000003fUL - -/* ASI_INTR_ID - private */ -#define LP_INTR_ID 0x0000000000000000UL -#define LP_INTR_ID_ID 0x00000000000003ffUL - -/* ASI_CESR_ID - private */ -#define CESR_ID 0x0000000000000040UL -#define CESR_ID_ID 0x00000000000000ffUL - -/* ASI_CORE_AVAILABLE - shared */ -#define LP_AVAIL 0x0000000000000000UL -#define LP_AVAIL_1 0x0000000000000002UL -#define LP_AVAIL_0 0x0000000000000001UL - -/* ASI_CORE_ENABLE_STATUS - shared */ -#define LP_ENAB_STAT 0x0000000000000010UL -#define LP_ENAB_STAT_1 0x0000000000000002UL -#define LP_ENAB_STAT_0 0x0000000000000001UL - -/* ASI_CORE_ENABLE - shared */ -#define LP_ENAB 0x0000000000000020UL -#define LP_ENAB_1 0x0000000000000002UL -#define LP_ENAB_0 0x0000000000000001UL - -/* ASI_CORE_RUNNING - shared */ -#define LP_RUNNING_RW 0x0000000000000050UL -#define LP_RUNNING_W1S 0x0000000000000060UL -#define LP_RUNNING_W1C 0x0000000000000068UL -#define LP_RUNNING_1 0x0000000000000002UL -#define LP_RUNNING_0 0x0000000000000001UL - -/* ASI_CORE_RUNNING_STAT - shared */ -#define LP_RUN_STAT 0x0000000000000058UL -#define LP_RUN_STAT_1 0x0000000000000002UL -#define LP_RUN_STAT_0 0x0000000000000001UL - -/* ASI_XIR_STEERING - shared */ -#define LP_XIR_STEER 0x0000000000000030UL -#define LP_XIR_STEER_1 0x0000000000000002UL -#define LP_XIR_STEER_0 0x0000000000000001UL - -/* ASI_CMT_ERROR_STEERING - shared */ -#define CMT_ER_STEER 0x0000000000000040UL -#define CMT_ER_STEER_1 0x0000000000000002UL -#define CMT_ER_STEER_0 0x0000000000000001UL - -#endif /* _SPARC64_CMT_H */ diff --git a/arch/sparc/include/asm/mpmbox.h b/arch/sparc/include/asm/mpmbox.h deleted file mode 100644 index f842303..0000000 --- a/arch/sparc/include/asm/mpmbox.h +++ /dev/null @@ -1,67 +0,0 @@ -/* - * mpmbox.h: Interface and defines for the OpenProm mailbox - * facilities for MP machines under Linux. - * - * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu) - */ - -#ifndef _SPARC_MPMBOX_H -#define _SPARC_MPMBOX_H - -/* The prom allocates, for each CPU on the machine an unsigned - * byte in physical ram. You probe the device tree prom nodes - * for these values. The purpose of this byte is to be able to - * pass messages from one cpu to another. - */ - -/* These are the main message types we have to look for in our - * Cpu mailboxes, based upon these values we decide what course - * of action to take. - */ - -/* The CPU is executing code in the kernel. */ -#define MAILBOX_ISRUNNING 0xf0 - -/* Another CPU called romvec->pv_exit(), you should call - * prom_stopcpu() when you see this in your mailbox. - */ -#define MAILBOX_EXIT 0xfb - -/* Another CPU called romvec->pv_enter(), you should call - * prom_cpuidle() when this is seen. - */ -#define MAILBOX_GOSPIN 0xfc - -/* Another CPU has hit a breakpoint either into kadb or the prom - * itself. Just like MAILBOX_GOSPIN, you should call prom_cpuidle() - * at this point. - */ -#define MAILBOX_BPT_SPIN 0xfd - -/* Oh geese, some other nitwit got a damn watchdog reset. The party's - * over so go call prom_stopcpu(). - */ -#define MAILBOX_WDOG_STOP 0xfe - -#ifndef __ASSEMBLY__ - -/* Handy macro's to determine a cpu's state. */ - -/* Is the cpu still in Power On Self Test? */ -#define MBOX_POST_P(letter) ((letter) >= 0x00 && (letter) <= 0x7f) - -/* Is the cpu at the 'ok' prompt of the PROM? */ -#define MBOX_PROMPROMPT_P(letter) ((letter) >= 0x80 && (letter) <= 0x8f) - -/* Is the cpu spinning in the PROM? */ -#define MBOX_PROMSPIN_P(letter) ((letter) >= 0x90 && (letter) <= 0xef) - -/* Sanity check... This is junk mail, throw it out. */ -#define MBOX_BOGON_P(letter) ((letter) >= 0xf1 && (letter) <= 0xfa) - -/* Is the cpu actively running an application/kernel-code? */ -#define MBOX_RUNNING_P(letter) ((letter) == MAILBOX_ISRUNNING) - -#endif /* !(__ASSEMBLY__) */ - -#endif /* !(_SPARC_MPMBOX_H) */ diff --git a/arch/sparc/kernel/vio.c b/arch/sparc/kernel/vio.c index 5cffdc5..3e244f3 100644 --- a/arch/sparc/kernel/vio.c +++ b/arch/sparc/kernel/vio.c @@ -443,7 +443,7 @@ static int __init vio_init(void) root_vdev = vio_create_one(hp, root, NULL); err = -ENODEV; if (!root_vdev) { - printk(KERN_ERR "VIO: Coult not create root device.\n"); + printk(KERN_ERR "VIO: Could not create root device.\n"); goto out_release; } diff --git a/arch/tile/include/asm/uaccess.h b/arch/tile/include/asm/uaccess.h index c3dd275..9ab078a 100644 --- a/arch/tile/include/asm/uaccess.h +++ b/arch/tile/include/asm/uaccess.h @@ -146,7 +146,7 @@ extern int fixup_exception(struct pt_regs *regs); #ifdef __tilegx__ #define __get_user_1(x, ptr, ret) __get_user_asm(ld1u, x, ptr, ret) #define __get_user_2(x, ptr, ret) __get_user_asm(ld2u, x, ptr, ret) -#define __get_user_4(x, ptr, ret) __get_user_asm(ld4u, x, ptr, ret) +#define __get_user_4(x, ptr, ret) __get_user_asm(ld4s, x, ptr, ret) #define __get_user_8(x, ptr, ret) __get_user_asm(ld, x, ptr, ret) #else #define __get_user_1(x, ptr, ret) __get_user_asm(lb_u, x, ptr, ret) diff --git a/arch/tile/kernel/backtrace.c b/arch/tile/kernel/backtrace.c index 9092ce8..f8b74ca 100644 --- a/arch/tile/kernel/backtrace.c +++ b/arch/tile/kernel/backtrace.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/string.h> +#include <asm/byteorder.h> #include <asm/backtrace.h> #include <asm/tile-desc.h> #include <arch/abi.h> @@ -336,8 +337,12 @@ static void find_caller_pc_and_caller_sp(CallerLocation *location, bytes_to_prefetch / sizeof(tile_bundle_bits); } - /* Decode the next bundle. */ - bundle.bits = prefetched_bundles[next_bundle++]; + /* + * Decode the next bundle. + * TILE always stores instruction bundles in little-endian + * mode, even when the chip is running in big-endian mode. + */ + bundle.bits = le64_to_cpu(prefetched_bundles[next_bundle++]); bundle.num_insns = parse_insn_tile(bundle.bits, pc, bundle.insns); num_info_ops = bt_get_info_ops(&bundle, info_operands); diff --git a/arch/um/drivers/mconsole_kern.c b/arch/um/drivers/mconsole_kern.c index 88e466b..43b39d6 100644 --- a/arch/um/drivers/mconsole_kern.c +++ b/arch/um/drivers/mconsole_kern.c @@ -705,7 +705,6 @@ static void stack_proc(void *arg) struct task_struct *from = current, *to = arg; to->thread.saved_task = from; - rcu_switch_from(from); switch_to(from, to, from); } diff --git a/arch/x86/crypto/aesni-intel_asm.S b/arch/x86/crypto/aesni-intel_asm.S index be6d9e3..3470624 100644 --- a/arch/x86/crypto/aesni-intel_asm.S +++ b/arch/x86/crypto/aesni-intel_asm.S @@ -2460,10 +2460,12 @@ ENTRY(aesni_cbc_dec) pxor IN3, STATE4 movaps IN4, IV #else - pxor (INP), STATE2 - pxor 0x10(INP), STATE3 pxor IN1, STATE4 movaps IN2, IV + movups (INP), IN1 + pxor IN1, STATE2 + movups 0x10(INP), IN2 + pxor IN2, STATE3 #endif movups STATE1, (OUTP) movups STATE2, 0x10(OUTP) diff --git a/arch/x86/ia32/ia32_signal.c b/arch/x86/ia32/ia32_signal.c index daeca56..673ac9b 100644 --- a/arch/x86/ia32/ia32_signal.c +++ b/arch/x86/ia32/ia32_signal.c @@ -38,7 +38,7 @@ int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from) { int err = 0; - bool ia32 = is_ia32_task(); + bool ia32 = test_thread_flag(TIF_IA32); if (!access_ok(VERIFY_WRITE, to, sizeof(compat_siginfo_t))) return -EFAULT; diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h index 340ee49..f91e80f 100644 --- a/arch/x86/include/asm/cpufeature.h +++ b/arch/x86/include/asm/cpufeature.h @@ -176,7 +176,7 @@ #define X86_FEATURE_XSAVEOPT (7*32+ 4) /* Optimized Xsave */ #define X86_FEATURE_PLN (7*32+ 5) /* Intel Power Limit Notification */ #define X86_FEATURE_PTS (7*32+ 6) /* Intel Package Thermal Status */ -#define X86_FEATURE_DTS (7*32+ 7) /* Digital Thermal Sensor */ +#define X86_FEATURE_DTHERM (7*32+ 7) /* Digital Thermal Sensor */ #define X86_FEATURE_HW_PSTATE (7*32+ 8) /* AMD HW-PState */ /* Virtualization flags: Linux defined, word 8 */ diff --git a/arch/x86/include/asm/pgtable-3level.h b/arch/x86/include/asm/pgtable-3level.h index 43876f1..cb00ccc 100644 --- a/arch/x86/include/asm/pgtable-3level.h +++ b/arch/x86/include/asm/pgtable-3level.h @@ -47,16 +47,26 @@ static inline void native_set_pte(pte_t *ptep, pte_t pte) * they can run pmd_offset_map_lock or pmd_trans_huge or other pmd * operations. * - * Without THP if the mmap_sem is hold for reading, the - * pmd can only transition from null to not null while pmd_read_atomic runs. - * So there's no need of literally reading it atomically. + * Without THP if the mmap_sem is hold for reading, the pmd can only + * transition from null to not null while pmd_read_atomic runs. So + * we can always return atomic pmd values with this function. * * With THP if the mmap_sem is hold for reading, the pmd can become - * THP or null or point to a pte (and in turn become "stable") at any - * time under pmd_read_atomic, so it's mandatory to read it atomically - * with cmpxchg8b. + * trans_huge or none or point to a pte (and in turn become "stable") + * at any time under pmd_read_atomic. We could read it really + * atomically here with a atomic64_read for the THP enabled case (and + * it would be a whole lot simpler), but to avoid using cmpxchg8b we + * only return an atomic pmdval if the low part of the pmdval is later + * found stable (i.e. pointing to a pte). And we're returning a none + * pmdval if the low part of the pmd is none. In some cases the high + * and low part of the pmdval returned may not be consistent if THP is + * enabled (the low part may point to previously mapped hugepage, + * while the high part may point to a more recently mapped hugepage), + * but pmd_none_or_trans_huge_or_clear_bad() only needs the low part + * of the pmd to be read atomically to decide if the pmd is unstable + * or not, with the only exception of when the low part of the pmd is + * zero in which case we return a none pmd. */ -#ifndef CONFIG_TRANSPARENT_HUGEPAGE static inline pmd_t pmd_read_atomic(pmd_t *pmdp) { pmdval_t ret; @@ -74,12 +84,6 @@ static inline pmd_t pmd_read_atomic(pmd_t *pmdp) return (pmd_t) { ret }; } -#else /* CONFIG_TRANSPARENT_HUGEPAGE */ -static inline pmd_t pmd_read_atomic(pmd_t *pmdp) -{ - return (pmd_t) { atomic64_read((atomic64_t *)pmdp) }; -} -#endif /* CONFIG_TRANSPARENT_HUGEPAGE */ static inline void native_set_pte_atomic(pte_t *ptep, pte_t pte) { diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 8afb693..b2297e5 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -422,12 +422,14 @@ acpi_parse_int_src_ovr(struct acpi_subtable_header * header, return 0; } - if (intsrc->source_irq == 0 && intsrc->global_irq == 2) { + if (intsrc->source_irq == 0) { if (acpi_skip_timer_override) { - printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n"); + printk(PREFIX "BIOS IRQ0 override ignored.\n"); return 0; } - if (acpi_fix_pin2_polarity && (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) { + + if ((intsrc->global_irq == 2) && acpi_fix_pin2_polarity + && (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) { intsrc->inti_flags &= ~ACPI_MADT_POLARITY_MASK; printk(PREFIX "BIOS IRQ0 pin2 override: forcing polarity to high active.\n"); } @@ -1334,17 +1336,12 @@ static int __init dmi_disable_acpi(const struct dmi_system_id *d) } /* - * Force ignoring BIOS IRQ0 pin2 override + * Force ignoring BIOS IRQ0 override */ static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d) { - /* - * The ati_ixp4x0_rev() early PCI quirk should have set - * the acpi_skip_timer_override flag already: - */ if (!acpi_skip_timer_override) { - WARN(1, KERN_ERR "ati_ixp4x0 quirk not complete.\n"); - pr_notice("%s detected: Ignoring BIOS IRQ0 pin2 override\n", + pr_notice("%s detected: Ignoring BIOS IRQ0 override\n", d->ident); acpi_skip_timer_override = 1; } @@ -1438,7 +1435,7 @@ static struct dmi_system_id __initdata acpi_dmi_table_late[] = { * is enabled. This input is incorrectly designated the * ISA IRQ 0 via an interrupt source override even though * it is wired to the output of the master 8259A and INTIN0 - * is not connected at all. Force ignoring BIOS IRQ0 pin2 + * is not connected at all. Force ignoring BIOS IRQ0 * override in that cases. */ { @@ -1473,6 +1470,14 @@ static struct dmi_system_id __initdata acpi_dmi_table_late[] = { DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6715b"), }, }, + { + .callback = dmi_ignore_irq0_timer_override, + .ident = "FUJITSU SIEMENS", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO PRO V2030"), + }, + }, {} }; diff --git a/arch/x86/kernel/cpu/mkcapflags.pl b/arch/x86/kernel/cpu/mkcapflags.pl index dfea390..c7b3fe2 100644 --- a/arch/x86/kernel/cpu/mkcapflags.pl +++ b/arch/x86/kernel/cpu/mkcapflags.pl @@ -1,4 +1,4 @@ -#!/usr/bin/perl +#!/usr/bin/perl -w # # Generate the x86_cap_flags[] array from include/asm-x86/cpufeature.h # @@ -11,22 +11,35 @@ open(OUT, "> $out\0") or die "$0: cannot create: $out: $!\n"; print OUT "#include <asm/cpufeature.h>\n\n"; print OUT "const char * const x86_cap_flags[NCAPINTS*32] = {\n"; +%features = (); +$err = 0; + while (defined($line = <IN>)) { if ($line =~ /^\s*\#\s*define\s+(X86_FEATURE_(\S+))\s+(.*)$/) { $macro = $1; - $feature = $2; + $feature = "\L$2"; $tail = $3; if ($tail =~ /\/\*\s*\"([^"]*)\".*\*\//) { - $feature = $1; + $feature = "\L$1"; } - if ($feature ne '') { - printf OUT "\t%-32s = \"%s\",\n", - "[$macro]", "\L$feature"; + next if ($feature eq ''); + + if ($features{$feature}++) { + print STDERR "$in: duplicate feature name: $feature\n"; + $err++; } + printf OUT "\t%-32s = \"%s\",\n", "[$macro]", $feature; } } print OUT "};\n"; close(IN); close(OUT); + +if ($err) { + unlink($out); + exit(1); +} + +exit(0); diff --git a/arch/x86/kernel/cpu/scattered.c b/arch/x86/kernel/cpu/scattered.c index addf9e8..ee8e9ab 100644 --- a/arch/x86/kernel/cpu/scattered.c +++ b/arch/x86/kernel/cpu/scattered.c @@ -31,7 +31,7 @@ void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c) const struct cpuid_bit *cb; static const struct cpuid_bit __cpuinitconst cpuid_bits[] = { - { X86_FEATURE_DTS, CR_EAX, 0, 0x00000006, 0 }, + { X86_FEATURE_DTHERM, CR_EAX, 0, 0x00000006, 0 }, { X86_FEATURE_IDA, CR_EAX, 1, 0x00000006, 0 }, { X86_FEATURE_ARAT, CR_EAX, 2, 0x00000006, 0 }, { X86_FEATURE_PLN, CR_EAX, 4, 0x00000006, 0 }, diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c index 8bfb614..3f61904 100644 --- a/arch/x86/kernel/kgdb.c +++ b/arch/x86/kernel/kgdb.c @@ -444,12 +444,12 @@ void kgdb_roundup_cpus(unsigned long flags) /** * kgdb_arch_handle_exception - Handle architecture specific GDB packets. - * @vector: The error vector of the exception that happened. + * @e_vector: The error vector of the exception that happened. * @signo: The signal number of the exception that happened. * @err_code: The error code of the exception that happened. - * @remcom_in_buffer: The buffer of the packet we have read. - * @remcom_out_buffer: The buffer of %BUFMAX bytes to write a packet into. - * @regs: The &struct pt_regs of the current process. + * @remcomInBuffer: The buffer of the packet we have read. + * @remcomOutBuffer: The buffer of %BUFMAX bytes to write a packet into. + * @linux_regs: The &struct pt_regs of the current process. * * This function MUST handle the 'c' and 's' command packets, * as well packets to set / remove a hardware breakpoint, if used. diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c index 086eb58..f1b42b3 100644 --- a/arch/x86/kernel/kvmclock.c +++ b/arch/x86/kernel/kvmclock.c @@ -120,11 +120,6 @@ bool kvm_check_and_clear_guest_paused(void) bool ret = false; struct pvclock_vcpu_time_info *src; - /* - * per_cpu() is safe here because this function is only called from - * timer functions where preemption is already disabled. - */ - WARN_ON(!in_atomic()); src = &__get_cpu_var(hv_clock); if ((src->flags & PVCLOCK_GUEST_STOPPED) != 0) { __this_cpu_and(hv_clock.flags, ~PVCLOCK_GUEST_STOPPED); diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index 62c9457..c0f420f 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -100,7 +100,7 @@ void *dma_generic_alloc_coherent(struct device *dev, size_t size, struct dma_attrs *attrs) { unsigned long dma_mask; - struct page *page = NULL; + struct page *page; unsigned int count = PAGE_ALIGN(size) >> PAGE_SHIFT; dma_addr_t addr; @@ -108,6 +108,7 @@ void *dma_generic_alloc_coherent(struct device *dev, size_t size, flag |= __GFP_ZERO; again: + page = NULL; if (!(flag & GFP_ATOMIC)) page = dma_alloc_from_contiguous(dev, count, get_order(size)); if (!page) diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 25b48ed..5de92f1 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -451,6 +451,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 990"), }, }, + { /* Handle problems with rebooting on the Precision M6600. */ + .callback = set_pci_reboot, + .ident = "Dell OptiPlex 990", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Precision M6600"), + }, + }, { } }; diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 3fab55b..7bd8a08 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -349,9 +349,12 @@ static bool __cpuinit match_llc(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o) static bool __cpuinit match_mc(struct cpuinfo_x86 *c, struct cpuinfo_x86 *o) { - if (c->phys_proc_id == o->phys_proc_id) - return topology_sane(c, o, "mc"); + if (c->phys_proc_id == o->phys_proc_id) { + if (cpu_has(c, X86_FEATURE_AMD_DCM)) + return true; + return topology_sane(c, o, "mc"); + } return false; } diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c index 7515cf0e..5db36ca 100644 --- a/arch/x86/kernel/vsyscall_64.c +++ b/arch/x86/kernel/vsyscall_64.c @@ -139,6 +139,19 @@ static int addr_to_vsyscall_nr(unsigned long addr) return nr; } +#ifdef CONFIG_SECCOMP +static int vsyscall_seccomp(struct task_struct *tsk, int syscall_nr) +{ + if (!seccomp_mode(&tsk->seccomp)) + return 0; + task_pt_regs(tsk)->orig_ax = syscall_nr; + task_pt_regs(tsk)->ax = syscall_nr; + return __secure_computing(syscall_nr); +} +#else +#define vsyscall_seccomp(_tsk, _nr) 0 +#endif + static bool write_ok_or_segv(unsigned long ptr, size_t size) { /* @@ -174,6 +187,7 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address) int vsyscall_nr; int prev_sig_on_uaccess_error; long ret; + int skip; /* * No point in checking CS -- the only way to get here is a user mode @@ -205,9 +219,6 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address) } tsk = current; - if (seccomp_mode(&tsk->seccomp)) - do_exit(SIGKILL); - /* * With a real vsyscall, page faults cause SIGSEGV. We want to * preserve that behavior to make writing exploits harder. @@ -222,8 +233,13 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address) * address 0". */ ret = -EFAULT; + skip = 0; switch (vsyscall_nr) { case 0: + skip = vsyscall_seccomp(tsk, __NR_gettimeofday); + if (skip) + break; + if (!write_ok_or_segv(regs->di, sizeof(struct timeval)) || !write_ok_or_segv(regs->si, sizeof(struct timezone))) break; @@ -234,6 +250,10 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address) break; case 1: + skip = vsyscall_seccomp(tsk, __NR_time); + if (skip) + break; + if (!write_ok_or_segv(regs->di, sizeof(time_t))) break; @@ -241,6 +261,10 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address) break; case 2: + skip = vsyscall_seccomp(tsk, __NR_getcpu); + if (skip) + break; + if (!write_ok_or_segv(regs->di, sizeof(unsigned)) || !write_ok_or_segv(regs->si, sizeof(unsigned))) break; @@ -253,6 +277,12 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address) current_thread_info()->sig_on_uaccess_error = prev_sig_on_uaccess_error; + if (skip) { + if ((long)regs->ax <= 0L) /* seccomp errno emulation */ + goto do_ret; + goto done; /* seccomp trace/trap */ + } + if (ret == -EFAULT) { /* Bad news -- userspace fed a bad pointer to a vsyscall. */ warn_bad_vsyscall(KERN_INFO, regs, @@ -271,10 +301,11 @@ bool emulate_vsyscall(struct pt_regs *regs, unsigned long address) regs->ax = ret; +do_ret: /* Emulate a ret instruction. */ regs->ip = caller; regs->sp += 8; - +done: return true; sigsegv: diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index be3cea4..57e168e 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -3934,6 +3934,9 @@ static void kvm_mmu_remove_some_alloc_mmu_pages(struct kvm *kvm, { struct kvm_mmu_page *page; + if (list_empty(&kvm->arch.active_mmu_pages)) + return; + page = container_of(kvm->arch.active_mmu_pages.prev, struct kvm_mmu_page, link); kvm_mmu_prepare_zap_page(kvm, page, invalid_list); diff --git a/arch/x86/lib/csum-wrappers_64.c b/arch/x86/lib/csum-wrappers_64.c index 459b58a..25b7ae8 100644 --- a/arch/x86/lib/csum-wrappers_64.c +++ b/arch/x86/lib/csum-wrappers_64.c @@ -115,7 +115,7 @@ EXPORT_SYMBOL(csum_partial_copy_to_user); * @src: source address * @dst: destination address * @len: number of bytes to be copied. - * @isum: initial sum that is added into the result (32bit unfolded) + * @sum: initial sum that is added into the result (32bit unfolded) * * Returns an 32bit unfolded checksum of the buffer. */ diff --git a/arch/x86/lib/usercopy.c b/arch/x86/lib/usercopy.c index 677b1ed..4f74d94 100644 --- a/arch/x86/lib/usercopy.c +++ b/arch/x86/lib/usercopy.c @@ -22,7 +22,7 @@ copy_from_user_nmi(void *to, const void __user *from, unsigned long n) void *map; int ret; - if (__range_not_ok(from, n, TASK_SIZE) == 0) + if (__range_not_ok(from, n, TASK_SIZE)) return len; do { diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index be1ef57..78fe3f1 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -180,7 +180,7 @@ err_free_memtype: /** * ioremap_nocache - map bus memory into CPU space - * @offset: bus address of the memory + * @phys_addr: bus address of the memory * @size: size of the resource to map * * ioremap_nocache performs a platform specific sequence of operations to @@ -217,7 +217,7 @@ EXPORT_SYMBOL(ioremap_nocache); /** * ioremap_wc - map memory into CPU space write combined - * @offset: bus address of the memory + * @phys_addr: bus address of the memory * @size: size of the resource to map * * This version of ioremap ensures that the memory is marked write combining. diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index e1ebde3..a718e0d 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -122,7 +122,7 @@ within(unsigned long addr, unsigned long start, unsigned long end) /** * clflush_cache_range - flush a cache range with clflush - * @addr: virtual start address + * @vaddr: virtual start address * @size: number of bytes to flush * * clflush is an unordered instruction which needs fencing with mfence diff --git a/arch/x86/platform/mrst/early_printk_mrst.c b/arch/x86/platform/mrst/early_printk_mrst.c index 3c6e328..028454f 100644 --- a/arch/x86/platform/mrst/early_printk_mrst.c +++ b/arch/x86/platform/mrst/early_printk_mrst.c @@ -110,19 +110,16 @@ static struct kmsg_dumper dw_dumper; static int dumper_registered; static void dw_kmsg_dump(struct kmsg_dumper *dumper, - enum kmsg_dump_reason reason, - const char *s1, unsigned long l1, - const char *s2, unsigned long l2) + enum kmsg_dump_reason reason) { - int i; + static char line[1024]; + size_t len; /* When run to this, we'd better re-init the HW */ mrst_early_console_init(); - for (i = 0; i < l1; i++) - early_mrst_console.write(&early_mrst_console, s1 + i, 1); - for (i = 0; i < l2; i++) - early_mrst_console.write(&early_mrst_console, s2 + i, 1); + while (kmsg_dump_get_line(dumper, true, line, sizeof(line), &len)) + early_mrst_console.write(&early_mrst_console, line, len); } /* Set the ratio rate to 115200, 8n1, IRQ disabled */ diff --git a/arch/x86/um/sys_call_table_32.c b/arch/x86/um/sys_call_table_32.c index 416bd40..68d1dc9 100644 --- a/arch/x86/um/sys_call_table_32.c +++ b/arch/x86/um/sys_call_table_32.c @@ -39,9 +39,9 @@ #undef __SYSCALL_I386 #define __SYSCALL_I386(nr, sym, compat) [ nr ] = sym, -typedef void (*sys_call_ptr_t)(void); +typedef asmlinkage void (*sys_call_ptr_t)(void); -extern void sys_ni_syscall(void); +extern asmlinkage void sys_ni_syscall(void); const sys_call_ptr_t sys_call_table[] __cacheline_aligned = { /* diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index e74df95..ff962d4 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -209,6 +209,9 @@ static void __init xen_banner(void) xen_feature(XENFEAT_mmu_pt_update_preserve_ad) ? " (preserve-AD)" : ""); } +#define CPUID_THERM_POWER_LEAF 6 +#define APERFMPERF_PRESENT 0 + static __read_mostly unsigned int cpuid_leaf1_edx_mask = ~0; static __read_mostly unsigned int cpuid_leaf1_ecx_mask = ~0; @@ -242,6 +245,11 @@ static void xen_cpuid(unsigned int *ax, unsigned int *bx, *dx = cpuid_leaf5_edx_val; return; + case CPUID_THERM_POWER_LEAF: + /* Disabling APERFMPERF for kernel usage */ + maskecx = ~(1 << APERFMPERF_PRESENT); + break; + case 0xb: /* Suppress extended topology stuff */ maskebx = 0; diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c index ffd08c4..64effdc6 100644 --- a/arch/x86/xen/p2m.c +++ b/arch/x86/xen/p2m.c @@ -706,6 +706,7 @@ int m2p_add_override(unsigned long mfn, struct page *page, unsigned long uninitialized_var(address); unsigned level; pte_t *ptep = NULL; + int ret = 0; pfn = page_to_pfn(page); if (!PageHighMem(page)) { @@ -741,6 +742,24 @@ int m2p_add_override(unsigned long mfn, struct page *page, list_add(&page->lru, &m2p_overrides[mfn_hash(mfn)]); spin_unlock_irqrestore(&m2p_override_lock, flags); + /* p2m(m2p(mfn)) == mfn: the mfn is already present somewhere in + * this domain. Set the FOREIGN_FRAME_BIT in the p2m for the other + * pfn so that the following mfn_to_pfn(mfn) calls will return the + * pfn from the m2p_override (the backend pfn) instead. + * We need to do this because the pages shared by the frontend + * (xen-blkfront) can be already locked (lock_page, called by + * do_read_cache_page); when the userspace backend tries to use them + * with direct_IO, mfn_to_pfn returns the pfn of the frontend, so + * do_blockdev_direct_IO is going to try to lock the same pages + * again resulting in a deadlock. + * As a side effect get_user_pages_fast might not be safe on the + * frontend pages while they are being shared with the backend, + * because mfn_to_pfn (that ends up being called by GUPF) will + * return the backend pfn rather than the frontend pfn. */ + ret = __get_user(pfn, &machine_to_phys_mapping[mfn]); + if (ret == 0 && get_phys_to_machine(pfn) == mfn) + set_phys_to_machine(pfn, FOREIGN_FRAME(mfn)); + return 0; } EXPORT_SYMBOL_GPL(m2p_add_override); @@ -752,6 +771,7 @@ int m2p_remove_override(struct page *page, bool clear_pte) unsigned long uninitialized_var(address); unsigned level; pte_t *ptep = NULL; + int ret = 0; pfn = page_to_pfn(page); mfn = get_phys_to_machine(pfn); @@ -821,6 +841,22 @@ int m2p_remove_override(struct page *page, bool clear_pte) } else set_phys_to_machine(pfn, page->index); + /* p2m(m2p(mfn)) == FOREIGN_FRAME(mfn): the mfn is already present + * somewhere in this domain, even before being added to the + * m2p_override (see comment above in m2p_add_override). + * If there are no other entries in the m2p_override corresponding + * to this mfn, then remove the FOREIGN_FRAME_BIT from the p2m for + * the original pfn (the one shared by the frontend): the backend + * cannot do any IO on this page anymore because it has been + * unshared. Removing the FOREIGN_FRAME_BIT from the p2m entry of + * the original pfn causes mfn_to_pfn(mfn) to return the frontend + * pfn again. */ + mfn &= ~FOREIGN_FRAME_BIT; + ret = __get_user(pfn, &machine_to_phys_mapping[mfn]); + if (ret == 0 && get_phys_to_machine(pfn) == FOREIGN_FRAME(mfn) && + m2p_find_override(mfn) == NULL) + set_phys_to_machine(pfn, mfn); + return 0; } EXPORT_SYMBOL_GPL(m2p_remove_override); diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index 3ebba07..a4790bf 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -371,7 +371,8 @@ char * __init xen_memory_setup(void) populated = xen_populate_chunk(map, memmap.nr_entries, max_pfn, &last_pfn, xen_released_pages); - extra_pages += (xen_released_pages - populated); + xen_released_pages -= populated; + extra_pages += xen_released_pages; if (last_pfn > max_pfn) { max_pfn = min(MAX_DOMAIN_PAGES, last_pfn); diff --git a/arch/xtensa/Makefile b/arch/xtensa/Makefile index 7608559..f973754 100644 --- a/arch/xtensa/Makefile +++ b/arch/xtensa/Makefile @@ -68,8 +68,8 @@ endif # Only build variant and/or platform if it includes a Makefile -buildvar := $(shell test -a $(srctree)/arch/xtensa/variants/$(VARIANT)/Makefile && echo arch/xtensa/variants/$(VARIANT)/) -buildplf := $(shell test -a $(srctree)/arch/xtensa/platforms/$(PLATFORM)/Makefile && echo arch/xtensa/platforms/$(PLATFORM)/) +buildvar := $(shell test -e $(srctree)/arch/xtensa/variants/$(VARIANT)/Makefile && echo arch/xtensa/variants/$(VARIANT)/) +buildplf := $(shell test -e $(srctree)/arch/xtensa/platforms/$(PLATFORM)/Makefile && echo arch/xtensa/platforms/$(PLATFORM)/) # Find libgcc.a diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c index 9b306e5..2c8d6a3 100644 --- a/arch/xtensa/kernel/process.c +++ b/arch/xtensa/kernel/process.c @@ -277,7 +277,7 @@ void xtensa_elf_core_copy_regs (xtensa_gregset_t *elfregs, struct pt_regs *regs) /* Don't leak any random bits. */ - memset(elfregs, 0, sizeof (elfregs)); + memset(elfregs, 0, sizeof(*elfregs)); /* Note: PS.EXCM is not set while user task is running; its * being set in regs->ps is for exception handling convenience. diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S index 88ecea3..ee2e208 100644 --- a/arch/xtensa/kernel/vmlinux.lds.S +++ b/arch/xtensa/kernel/vmlinux.lds.S @@ -83,7 +83,6 @@ SECTIONS _text = .; _stext = .; - _ftext = .; .text : { @@ -112,7 +111,7 @@ SECTIONS EXCEPTION_TABLE(16) /* Data section */ - _fdata = .; + _sdata = .; RW_DATA_SECTION(XCHAL_ICACHE_LINESIZE, PAGE_SIZE, THREAD_SIZE) _edata = .; diff --git a/arch/xtensa/mm/init.c b/arch/xtensa/mm/init.c index ba150e5..db955179 100644 --- a/arch/xtensa/mm/init.c +++ b/arch/xtensa/mm/init.c @@ -26,11 +26,7 @@ #include <asm/bootparam.h> #include <asm/page.h> - -/* References to section boundaries */ - -extern char _ftext, _etext, _fdata, _edata, _rodata_end; -extern char __init_begin, __init_end; +#include <asm/sections.h> /* * mem_reserve(start, end, must_exist) @@ -197,9 +193,9 @@ void __init mem_init(void) reservedpages++; } - codesize = (unsigned long) &_etext - (unsigned long) &_ftext; - datasize = (unsigned long) &_edata - (unsigned long) &_fdata; - initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin; + codesize = (unsigned long) _etext - (unsigned long) _stext; + datasize = (unsigned long) _edata - (unsigned long) _sdata; + initsize = (unsigned long) __init_end - (unsigned long) __init_begin; printk("Memory: %luk/%luk available (%ldk kernel code, %ldk reserved, " "%ldk data, %ldk init %ldk highmem)\n", @@ -237,7 +233,7 @@ void free_initrd_mem(unsigned long start, unsigned long end) void free_initmem(void) { - free_reserved_mem(&__init_begin, &__init_end); - printk("Freeing unused kernel memory: %dk freed\n", - (&__init_end - &__init_begin) >> 10); + free_reserved_mem(__init_begin, __init_end); + printk("Freeing unused kernel memory: %zuk freed\n", + (__init_end - __init_begin) >> 10); } |