diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/x86/boot/Makefile | 4 | ||||
-rw-r--r-- | arch/x86/boot/compressed/eboot.c | 21 | ||||
-rw-r--r-- | arch/x86/boot/compressed/head_32.S | 8 | ||||
-rw-r--r-- | arch/x86/boot/compressed/head_64.S | 8 | ||||
-rw-r--r-- | arch/x86/boot/header.S | 39 | ||||
-rw-r--r-- | arch/x86/boot/setup.ld | 2 | ||||
-rw-r--r-- | arch/x86/boot/tools/build.c | 81 | ||||
-rw-r--r-- | arch/x86/include/uapi/asm/bootparam.h | 63 | ||||
-rw-r--r-- | arch/x86/platform/efi/efi.c | 2 | ||||
-rw-r--r-- | arch/x86/platform/efi/efi_64.c | 22 | ||||
-rw-r--r-- | arch/x86/tools/relocs.c | 6 |
11 files changed, 183 insertions, 73 deletions
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile index ccce0ed..379814b 100644 --- a/arch/x86/boot/Makefile +++ b/arch/x86/boot/Makefile @@ -71,7 +71,7 @@ GCOV_PROFILE := n $(obj)/bzImage: asflags-y := $(SVGA_MODE) quiet_cmd_image = BUILD $@ -cmd_image = $(obj)/tools/build $(obj)/setup.bin $(obj)/vmlinux.bin > $@ +cmd_image = $(obj)/tools/build $(obj)/setup.bin $(obj)/vmlinux.bin $(obj)/zoffset.h > $@ $(obj)/bzImage: $(obj)/setup.bin $(obj)/vmlinux.bin $(obj)/tools/build FORCE $(call if_changed,image) @@ -92,7 +92,7 @@ targets += voffset.h $(obj)/voffset.h: vmlinux FORCE $(call if_changed,voffset) -sed-zoffset := -e 's/^\([0-9a-fA-F]*\) . \(startup_32\|input_data\|_end\|z_.*\)$$/\#define ZO_\2 0x\1/p' +sed-zoffset := -e 's/^\([0-9a-fA-F]*\) . \(startup_32\|startup_64\|efi_pe_entry\|efi_stub_entry\|input_data\|_end\|z_.*\)$$/\#define ZO_\2 0x\1/p' quiet_cmd_zoffset = ZOFFSET $@ cmd_zoffset = $(NM) $< | sed -n $(sed-zoffset) > $@ diff --git a/arch/x86/boot/compressed/eboot.c b/arch/x86/boot/compressed/eboot.c index 18e329c..f8fa411 100644 --- a/arch/x86/boot/compressed/eboot.c +++ b/arch/x86/boot/compressed/eboot.c @@ -256,10 +256,10 @@ static efi_status_t setup_efi_pci(struct boot_params *params) int i; struct setup_data *data; - data = (struct setup_data *)params->hdr.setup_data; + data = (struct setup_data *)(unsigned long)params->hdr.setup_data; while (data && data->next) - data = (struct setup_data *)data->next; + data = (struct setup_data *)(unsigned long)data->next; status = efi_call_phys5(sys_table->boottime->locate_handle, EFI_LOCATE_BY_PROTOCOL, &pci_proto, @@ -295,16 +295,18 @@ static efi_status_t setup_efi_pci(struct boot_params *params) if (!pci) continue; +#ifdef CONFIG_X86_64 status = efi_call_phys4(pci->attributes, pci, EfiPciIoAttributeOperationGet, 0, &attributes); - +#else + status = efi_call_phys5(pci->attributes, pci, + EfiPciIoAttributeOperationGet, 0, 0, + &attributes); +#endif if (status != EFI_SUCCESS) continue; - if (!(attributes & EFI_PCI_IO_ATTRIBUTE_EMBEDDED_ROM)) - continue; - if (!pci->romimage || !pci->romsize) continue; @@ -345,9 +347,9 @@ static efi_status_t setup_efi_pci(struct boot_params *params) memcpy(rom->romdata, pci->romimage, pci->romsize); if (data) - data->next = (uint64_t)rom; + data->next = (unsigned long)rom; else - params->hdr.setup_data = (uint64_t)rom; + params->hdr.setup_data = (unsigned long)rom; data = (struct setup_data *)rom; @@ -432,10 +434,9 @@ static efi_status_t setup_gop(struct screen_info *si, efi_guid_t *proto, * Once we've found a GOP supporting ConOut, * don't bother looking any further. */ + first_gop = gop; if (conout_found) break; - - first_gop = gop; } } diff --git a/arch/x86/boot/compressed/head_32.S b/arch/x86/boot/compressed/head_32.S index aa4aaf1..1e3184f 100644 --- a/arch/x86/boot/compressed/head_32.S +++ b/arch/x86/boot/compressed/head_32.S @@ -35,11 +35,11 @@ ENTRY(startup_32) #ifdef CONFIG_EFI_STUB jmp preferred_addr - .balign 0x10 /* * We don't need the return address, so set up the stack so - * efi_main() can find its arugments. + * efi_main() can find its arguments. */ +ENTRY(efi_pe_entry) add $0x4, %esp call make_boot_params @@ -50,8 +50,10 @@ ENTRY(startup_32) pushl %eax pushl %esi pushl %ecx + sub $0x4, %esp - .org 0x30,0x90 +ENTRY(efi_stub_entry) + add $0x4, %esp call efi_main cmpl $0, %eax movl %eax, %esi diff --git a/arch/x86/boot/compressed/head_64.S b/arch/x86/boot/compressed/head_64.S index 2c4b171..f5d1aaa 100644 --- a/arch/x86/boot/compressed/head_64.S +++ b/arch/x86/boot/compressed/head_64.S @@ -201,12 +201,12 @@ ENTRY(startup_64) */ #ifdef CONFIG_EFI_STUB /* - * The entry point for the PE/COFF executable is 0x210, so only - * legacy boot loaders will execute this jmp. + * The entry point for the PE/COFF executable is efi_pe_entry, so + * only legacy boot loaders will execute this jmp. */ jmp preferred_addr - .org 0x210 +ENTRY(efi_pe_entry) mov %rcx, %rdi mov %rdx, %rsi pushq %rdi @@ -218,7 +218,7 @@ ENTRY(startup_64) popq %rsi popq %rdi - .org 0x230,0x90 +ENTRY(efi_stub_entry) call efi_main movq %rax,%rsi cmpq $0,%rax diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S index 8c132a6..944ce59 100644 --- a/arch/x86/boot/header.S +++ b/arch/x86/boot/header.S @@ -21,6 +21,7 @@ #include <asm/e820.h> #include <asm/page_types.h> #include <asm/setup.h> +#include <asm/bootparam.h> #include "boot.h" #include "voffset.h" #include "zoffset.h" @@ -255,6 +256,9 @@ section_table: # header, from the old boot sector. .section ".header", "a" + .globl sentinel +sentinel: .byte 0xff, 0xff /* Used to detect broken loaders */ + .globl hdr hdr: setup_sects: .byte 0 /* Filled in by build.c */ @@ -279,7 +283,7 @@ _start: # Part 2 of the header, from the old setup.S .ascii "HdrS" # header signature - .word 0x020b # header version number (>= 0x0105) + .word 0x020c # header version number (>= 0x0105) # or else old loadlin-1.5 will fail) .globl realmode_swtch realmode_swtch: .word 0, 0 # default_switch, SETUPSEG @@ -297,13 +301,7 @@ type_of_loader: .byte 0 # 0 means ancient bootloader, newer # flags, unused bits must be zero (RFU) bit within loadflags loadflags: -LOADED_HIGH = 1 # If set, the kernel is loaded high -CAN_USE_HEAP = 0x80 # If set, the loader also has set - # heap_end_ptr to tell how much - # space behind setup.S can be used for - # heap purposes. - # Only the loader knows what is free - .byte LOADED_HIGH + .byte LOADED_HIGH # The kernel is to be loaded high setup_move_size: .word 0x8000 # size to move, when setup is not # loaded at 0x90000. We will move setup @@ -369,7 +367,23 @@ relocatable_kernel: .byte 1 relocatable_kernel: .byte 0 #endif min_alignment: .byte MIN_KERNEL_ALIGN_LG2 # minimum alignment -pad3: .word 0 + +xloadflags: +#ifdef CONFIG_X86_64 +# define XLF0 XLF_KERNEL_64 /* 64-bit kernel */ +#else +# define XLF0 0 +#endif +#ifdef CONFIG_EFI_STUB +# ifdef CONFIG_X86_64 +# define XLF23 XLF_EFI_HANDOVER_64 /* 64-bit EFI handover ok */ +# else +# define XLF23 XLF_EFI_HANDOVER_32 /* 32-bit EFI handover ok */ +# endif +#else +# define XLF23 0 +#endif + .word XLF0 | XLF23 cmdline_size: .long COMMAND_LINE_SIZE-1 #length of the command line, #added with boot protocol @@ -397,8 +411,13 @@ pref_address: .quad LOAD_PHYSICAL_ADDR # preferred load addr #define INIT_SIZE VO_INIT_SIZE #endif init_size: .long INIT_SIZE # kernel initialization size -handover_offset: .long 0x30 # offset to the handover +handover_offset: +#ifdef CONFIG_EFI_STUB + .long 0x30 # offset to the handover # protocol entry point +#else + .long 0 +#endif # End of setup header ##################################################### diff --git a/arch/x86/boot/setup.ld b/arch/x86/boot/setup.ld index 03c0683..96a6c75 100644 --- a/arch/x86/boot/setup.ld +++ b/arch/x86/boot/setup.ld @@ -13,7 +13,7 @@ SECTIONS .bstext : { *(.bstext) } .bsdata : { *(.bsdata) } - . = 497; + . = 495; .header : { *(.header) } .entrytext : { *(.entrytext) } .inittext : { *(.inittext) } diff --git a/arch/x86/boot/tools/build.c b/arch/x86/boot/tools/build.c index 4b8e165..94c5446 100644 --- a/arch/x86/boot/tools/build.c +++ b/arch/x86/boot/tools/build.c @@ -52,6 +52,10 @@ int is_big_kernel; #define PECOFF_RELOC_RESERVE 0x20 +unsigned long efi_stub_entry; +unsigned long efi_pe_entry; +unsigned long startup_64; + /*----------------------------------------------------------------------*/ static const u32 crctab32[] = { @@ -132,7 +136,7 @@ static void die(const char * str, ...) static void usage(void) { - die("Usage: build setup system [> image]"); + die("Usage: build setup system [zoffset.h] [> image]"); } #ifdef CONFIG_EFI_STUB @@ -206,30 +210,54 @@ static void update_pecoff_text(unsigned int text_start, unsigned int file_sz) */ put_unaligned_le32(file_sz - 512, &buf[pe_header + 0x1c]); -#ifdef CONFIG_X86_32 /* - * Address of entry point. - * - * The EFI stub entry point is +16 bytes from the start of - * the .text section. + * Address of entry point for PE/COFF executable */ - put_unaligned_le32(text_start + 16, &buf[pe_header + 0x28]); -#else - /* - * Address of entry point. startup_32 is at the beginning and - * the 64-bit entry point (startup_64) is always 512 bytes - * after. The EFI stub entry point is 16 bytes after that, as - * the first instruction allows legacy loaders to jump over - * the EFI stub initialisation - */ - put_unaligned_le32(text_start + 528, &buf[pe_header + 0x28]); -#endif /* CONFIG_X86_32 */ + put_unaligned_le32(text_start + efi_pe_entry, &buf[pe_header + 0x28]); update_pecoff_section_header(".text", text_start, text_sz); } #endif /* CONFIG_EFI_STUB */ + +/* + * Parse zoffset.h and find the entry points. We could just #include zoffset.h + * but that would mean tools/build would have to be rebuilt every time. It's + * not as if parsing it is hard... + */ +#define PARSE_ZOFS(p, sym) do { \ + if (!strncmp(p, "#define ZO_" #sym " ", 11+sizeof(#sym))) \ + sym = strtoul(p + 11 + sizeof(#sym), NULL, 16); \ +} while (0) + +static void parse_zoffset(char *fname) +{ + FILE *file; + char *p; + int c; + + file = fopen(fname, "r"); + if (!file) + die("Unable to open `%s': %m", fname); + c = fread(buf, 1, sizeof(buf) - 1, file); + if (ferror(file)) + die("read-error on `zoffset.h'"); + buf[c] = 0; + + p = (char *)buf; + + while (p && *p) { + PARSE_ZOFS(p, efi_stub_entry); + PARSE_ZOFS(p, efi_pe_entry); + PARSE_ZOFS(p, startup_64); + + p = strchr(p, '\n'); + while (p && (*p == '\r' || *p == '\n')) + p++; + } +} + int main(int argc, char ** argv) { unsigned int i, sz, setup_sectors; @@ -241,7 +269,19 @@ int main(int argc, char ** argv) void *kernel; u32 crc = 0xffffffffUL; - if (argc != 3) + /* Defaults for old kernel */ +#ifdef CONFIG_X86_32 + efi_pe_entry = 0x10; + efi_stub_entry = 0x30; +#else + efi_pe_entry = 0x210; + efi_stub_entry = 0x230; + startup_64 = 0x200; +#endif + + if (argc == 4) + parse_zoffset(argv[3]); + else if (argc != 3) usage(); /* Copy the setup code */ @@ -299,6 +339,11 @@ int main(int argc, char ** argv) #ifdef CONFIG_EFI_STUB update_pecoff_text(setup_sectors * 512, sz + i + ((sys_size * 16) - sz)); + +#ifdef CONFIG_X86_64 /* Yes, this is really how we defined it :( */ + efi_stub_entry -= 0x200; +#endif + put_unaligned_le32(efi_stub_entry, &buf[0x264]); #endif crc = partial_crc32(buf, i, crc); diff --git a/arch/x86/include/uapi/asm/bootparam.h b/arch/x86/include/uapi/asm/bootparam.h index 92862cd..c15ddaf 100644 --- a/arch/x86/include/uapi/asm/bootparam.h +++ b/arch/x86/include/uapi/asm/bootparam.h @@ -1,6 +1,31 @@ #ifndef _ASM_X86_BOOTPARAM_H #define _ASM_X86_BOOTPARAM_H +/* setup_data types */ +#define SETUP_NONE 0 +#define SETUP_E820_EXT 1 +#define SETUP_DTB 2 +#define SETUP_PCI 3 + +/* ram_size flags */ +#define RAMDISK_IMAGE_START_MASK 0x07FF +#define RAMDISK_PROMPT_FLAG 0x8000 +#define RAMDISK_LOAD_FLAG 0x4000 + +/* loadflags */ +#define LOADED_HIGH (1<<0) +#define QUIET_FLAG (1<<5) +#define KEEP_SEGMENTS (1<<6) +#define CAN_USE_HEAP (1<<7) + +/* xloadflags */ +#define XLF_KERNEL_64 (1<<0) +#define XLF_CAN_BE_LOADED_ABOVE_4G (1<<1) +#define XLF_EFI_HANDOVER_32 (1<<2) +#define XLF_EFI_HANDOVER_64 (1<<3) + +#ifndef __ASSEMBLY__ + #include <linux/types.h> #include <linux/screen_info.h> #include <linux/apm_bios.h> @@ -9,12 +34,6 @@ #include <asm/ist.h> #include <video/edid.h> -/* setup data types */ -#define SETUP_NONE 0 -#define SETUP_E820_EXT 1 -#define SETUP_DTB 2 -#define SETUP_PCI 3 - /* extensible setup data list node */ struct setup_data { __u64 next; @@ -28,9 +47,6 @@ struct setup_header { __u16 root_flags; __u32 syssize; __u16 ram_size; -#define RAMDISK_IMAGE_START_MASK 0x07FF -#define RAMDISK_PROMPT_FLAG 0x8000 -#define RAMDISK_LOAD_FLAG 0x4000 __u16 vid_mode; __u16 root_dev; __u16 boot_flag; @@ -42,10 +58,6 @@ struct setup_header { __u16 kernel_version; __u8 type_of_loader; __u8 loadflags; -#define LOADED_HIGH (1<<0) -#define QUIET_FLAG (1<<5) -#define KEEP_SEGMENTS (1<<6) -#define CAN_USE_HEAP (1<<7) __u16 setup_move_size; __u32 code32_start; __u32 ramdisk_image; @@ -58,7 +70,8 @@ struct setup_header { __u32 initrd_addr_max; __u32 kernel_alignment; __u8 relocatable_kernel; - __u8 _pad2[3]; + __u8 min_alignment; + __u16 xloadflags; __u32 cmdline_size; __u32 hardware_subarch; __u64 hardware_subarch_data; @@ -106,7 +119,10 @@ struct boot_params { __u8 hd1_info[16]; /* obsolete! */ /* 0x090 */ struct sys_desc_table sys_desc_table; /* 0x0a0 */ struct olpc_ofw_header olpc_ofw_header; /* 0x0b0 */ - __u8 _pad4[128]; /* 0x0c0 */ + __u32 ext_ramdisk_image; /* 0x0c0 */ + __u32 ext_ramdisk_size; /* 0x0c4 */ + __u32 ext_cmd_line_ptr; /* 0x0c8 */ + __u8 _pad4[116]; /* 0x0cc */ struct edid_info edid_info; /* 0x140 */ struct efi_info efi_info; /* 0x1c0 */ __u32 alt_mem_k; /* 0x1e0 */ @@ -115,7 +131,20 @@ struct boot_params { __u8 eddbuf_entries; /* 0x1e9 */ __u8 edd_mbr_sig_buf_entries; /* 0x1ea */ __u8 kbd_status; /* 0x1eb */ - __u8 _pad6[5]; /* 0x1ec */ + __u8 _pad5[3]; /* 0x1ec */ + /* + * The sentinel is set to a nonzero value (0xff) in header.S. + * + * A bootloader is supposed to only take setup_header and put + * it into a clean boot_params buffer. If it turns out that + * it is clumsy or too generous with the buffer, it most + * probably will pick up the sentinel variable too. The fact + * that this variable then is still 0xff will let kernel + * know that some variables in boot_params are invalid and + * kernel should zero out certain portions of boot_params. + */ + __u8 sentinel; /* 0x1ef */ + __u8 _pad6[1]; /* 0x1f0 */ struct setup_header hdr; /* setup header */ /* 0x1f1 */ __u8 _pad7[0x290-0x1f1-sizeof(struct setup_header)]; __u32 edd_mbr_sig_buffer[EDD_MBR_SIG_MAX]; /* 0x290 */ @@ -134,6 +163,6 @@ enum { X86_NR_SUBARCHS, }; - +#endif /* __ASSEMBLY__ */ #endif /* _ASM_X86_BOOTPARAM_H */ diff --git a/arch/x86/platform/efi/efi.c b/arch/x86/platform/efi/efi.c index 5426e48..77cf009 100644 --- a/arch/x86/platform/efi/efi.c +++ b/arch/x86/platform/efi/efi.c @@ -949,7 +949,7 @@ void __init efi_enter_virtual_mode(void) * * Call EFI services through wrapper functions. */ - efi.runtime_version = efi_systab.fw_revision; + efi.runtime_version = efi_systab.hdr.revision; efi.get_time = virt_efi_get_time; efi.set_time = virt_efi_set_time; efi.get_wakeup_time = virt_efi_get_wakeup_time; diff --git a/arch/x86/platform/efi/efi_64.c b/arch/x86/platform/efi/efi_64.c index 95fd505..2b20038 100644 --- a/arch/x86/platform/efi/efi_64.c +++ b/arch/x86/platform/efi/efi_64.c @@ -38,7 +38,7 @@ #include <asm/cacheflush.h> #include <asm/fixmap.h> -static pgd_t save_pgd __initdata; +static pgd_t *save_pgd __initdata; static unsigned long efi_flags __initdata; static void __init early_code_mapping_set_exec(int executable) @@ -61,12 +61,20 @@ static void __init early_code_mapping_set_exec(int executable) void __init efi_call_phys_prelog(void) { unsigned long vaddress; + int pgd; + int n_pgds; early_code_mapping_set_exec(1); local_irq_save(efi_flags); - vaddress = (unsigned long)__va(0x0UL); - save_pgd = *pgd_offset_k(0x0UL); - set_pgd(pgd_offset_k(0x0UL), *pgd_offset_k(vaddress)); + + n_pgds = DIV_ROUND_UP((max_pfn << PAGE_SHIFT), PGDIR_SIZE); + save_pgd = kmalloc(n_pgds * sizeof(pgd_t), GFP_KERNEL); + + for (pgd = 0; pgd < n_pgds; pgd++) { + save_pgd[pgd] = *pgd_offset_k(pgd * PGDIR_SIZE); + vaddress = (unsigned long)__va(pgd * PGDIR_SIZE); + set_pgd(pgd_offset_k(pgd * PGDIR_SIZE), *pgd_offset_k(vaddress)); + } __flush_tlb_all(); } @@ -75,7 +83,11 @@ void __init efi_call_phys_epilog(void) /* * After the lock is released, the original page table is restored. */ - set_pgd(pgd_offset_k(0x0UL), save_pgd); + int pgd; + int n_pgds = DIV_ROUND_UP((max_pfn << PAGE_SHIFT) , PGDIR_SIZE); + for (pgd = 0; pgd < n_pgds; pgd++) + set_pgd(pgd_offset_k(pgd * PGDIR_SIZE), save_pgd[pgd]); + kfree(save_pgd); __flush_tlb_all(); local_irq_restore(efi_flags); early_code_mapping_set_exec(0); diff --git a/arch/x86/tools/relocs.c b/arch/x86/tools/relocs.c index 5a1847d..79d67bd 100644 --- a/arch/x86/tools/relocs.c +++ b/arch/x86/tools/relocs.c @@ -814,12 +814,14 @@ int main(int argc, char **argv) read_relocs(fp); if (show_absolute_syms) { print_absolute_symbols(); - return 0; + goto out; } if (show_absolute_relocs) { print_absolute_relocs(); - return 0; + goto out; } emit_relocs(as_text, use_real_mode); +out: + fclose(fp); return 0; } |