diff options
Diffstat (limited to 'arch')
376 files changed, 3836 insertions, 10264 deletions
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index e3a8277..60219bf 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -41,10 +41,6 @@ config ARCH_HAS_ILOG2_U64 bool default n -config GENERIC_FIND_NEXT_BIT - bool - default y - config GENERIC_CALIBRATE_DELAY bool default y diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 7275009..9adc278 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -294,6 +294,8 @@ config ARCH_AT91 bool "Atmel AT91" select ARCH_REQUIRE_GPIOLIB select HAVE_CLK + select CLKDEV_LOOKUP + select ARM_PATCH_PHYS_VIRT if MMU help This enables support for systems based on the Atmel AT91RM9200, AT91SAM9 and AT91CAP9 processors. @@ -730,16 +732,6 @@ config ARCH_S5P64X0 Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440, SMDK6450. -config ARCH_S5P6442 - bool "Samsung S5P6442" - select CPU_V6 - select GENERIC_GPIO - select HAVE_CLK - select ARCH_USES_GETTIMEOFFSET - select HAVE_S3C2410_WATCHDOG if WATCHDOG - help - Samsung S5P6442 CPU based systems - config ARCH_S5PC100 bool "Samsung S5PC100" select GENERIC_GPIO @@ -991,8 +983,6 @@ endif source "arch/arm/mach-s5p64x0/Kconfig" -source "arch/arm/mach-s5p6442/Kconfig" - source "arch/arm/mach-s5pc100/Kconfig" source "arch/arm/mach-s5pv210/Kconfig" @@ -1399,7 +1389,6 @@ config NR_CPUS config HOTPLUG_CPU bool "Support for hot-pluggable CPUs (EXPERIMENTAL)" depends on SMP && HOTPLUG && EXPERIMENTAL - depends on !ARCH_MSM help Say Y here to experiment with turning CPUs off and on. CPUs can be controlled through /sys/devices/system/cpu. @@ -1420,7 +1409,7 @@ source kernel/Kconfig.preempt config HZ int default 200 if ARCH_EBSA110 || ARCH_S3C2410 || ARCH_S5P64X0 || \ - ARCH_S5P6442 || ARCH_S5PV210 || ARCH_EXYNOS4 + ARCH_S5PV210 || ARCH_EXYNOS4 default OMAP_32K_TIMER_HZ if ARCH_OMAP && OMAP_32K_TIMER default AT91_TIMER_HZ if ARCH_AT91 default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE @@ -1516,6 +1505,9 @@ config ARCH_SPARSEMEM_DEFAULT config ARCH_SELECT_MEMORY_MODEL def_bool ARCH_SPARSEMEM_ENABLE +config HAVE_ARCH_PFN_VALID + def_bool ARCH_HAS_HOLES_MEMORYMODEL || !SPARSEMEM + config HIGHMEM bool "High Memory Support" depends on MMU @@ -1683,6 +1675,13 @@ endmenu menu "Boot options" +config USE_OF + bool "Flattened Device Tree support" + select OF + select OF_EARLY_FLATTREE + help + Include support for flattened device tree machine descriptions. + # Compressed boot loader in ROM. Yes, we really want to ask about # TEXT and BSS so we preserve their values in the config files. config ZBOOT_ROM_TEXT @@ -2021,7 +2020,7 @@ menu "Power management options" source "kernel/power/Kconfig" config ARCH_SUSPEND_POSSIBLE - depends on !ARCH_S5P64X0 && !ARCH_S5P6442 && !ARCH_S5PC100 + depends on !ARCH_S5P64X0 && !ARCH_S5PC100 depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \ CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE def_bool y diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 25750bc..f5b2b39 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -176,7 +176,6 @@ machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2416 s3c2440 s3c24 machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0 machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0 -machine-$(CONFIG_ARCH_S5P6442) := s5p6442 machine-$(CONFIG_ARCH_S5PC100) := s5pc100 machine-$(CONFIG_ARCH_S5PV210) := s5pv210 machine-$(CONFIG_ARCH_EXYNOS4) := exynos4 diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index ea5ee4d..4b71766 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -7,7 +7,7 @@ config ARM_VIC config ARM_VIC_NR int default 4 if ARCH_S5PV210 - default 3 if ARCH_S5P6442 || ARCH_S5PC100 + default 3 if ARCH_S5PC100 default 2 depends on ARM_VIC help diff --git a/arch/arm/configs/at572d940hfek_defconfig b/arch/arm/configs/at572d940hfek_defconfig deleted file mode 100644 index 1b1158a..0000000 --- a/arch/arm/configs/at572d940hfek_defconfig +++ /dev/null @@ -1,358 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_LOCALVERSION="-AT572D940HF" -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_TASKSTATS=y -CONFIG_TASK_XACCT=y -CONFIG_TASK_IO_ACCOUNTING=y -CONFIG_AUDIT=y -CONFIG_CGROUPS=y -CONFIG_CGROUP_CPUACCT=y -CONFIG_CGROUP_SCHED=y -CONFIG_RT_GROUP_SCHED=y -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_RELAY=y -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_EXPERT=y -CONFIG_SLAB=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=m -CONFIG_KPROBES=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT572D940HF=y -CONFIG_MACH_AT572D940HFEB=y -CONFIG_AT91_PROGRAMMABLE_CLOCKS=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y -CONFIG_CMDLINE="mem=48M console=ttyS0 initrd=0x21100000,3145728 root=/dev/ram0 rw ip=172.16.1.181" -CONFIG_KEXEC=y -CONFIG_FPE_NWFPE=y -CONFIG_FPE_NWFPE_XP=y -CONFIG_NET=y -CONFIG_PACKET=m -CONFIG_UNIX=y -CONFIG_INET=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_NET_PKTGEN=m -CONFIG_NET_TCPPROBE=m -CONFIG_CAN=m -CONFIG_CAN_RAW=m -CONFIG_CAN_BCM=m -CONFIG_CAN_VCAN=m -CONFIG_CAN_DEBUG_DEVICES=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_CONNECTOR=m -CONFIG_MTD=m -CONFIG_MTD_DEBUG=y -CONFIG_MTD_DEBUG_VERBOSE=1 -CONFIG_MTD_CONCAT=m -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=m -CONFIG_MTD_BLOCK=m -CONFIG_MTD_BLOCK_RO=m -CONFIG_FTL=m -CONFIG_NFTL=m -CONFIG_NFTL_RW=y -CONFIG_INFTL=m -CONFIG_RFD_FTL=m -CONFIG_SSFDC=m -CONFIG_MTD_OOPS=m -CONFIG_MTD_CFI=m -CONFIG_MTD_JEDECPROBE=m -CONFIG_MTD_CFI_INTELEXT=m -CONFIG_MTD_CFI_AMDSTD=m -CONFIG_MTD_CFI_STAA=m -CONFIG_MTD_ROM=m -CONFIG_MTD_ABSENT=m -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_PHYSMAP=m -CONFIG_MTD_PLATRAM=m -CONFIG_MTD_DATAFLASH=m -CONFIG_MTD_M25P80=m -CONFIG_MTD_SLRAM=m -CONFIG_MTD_PHRAM=m -CONFIG_MTD_MTDRAM=m -CONFIG_MTD_BLOCK2MTD=m -CONFIG_MTD_NAND=m -CONFIG_MTD_NAND_VERIFY_WRITE=y -CONFIG_MTD_NAND_DISKONCHIP=m -CONFIG_MTD_NAND_NANDSIM=m -CONFIG_MTD_NAND_PLATFORM=m -CONFIG_MTD_ALAUDA=m -CONFIG_MTD_UBI=m -CONFIG_MTD_UBI_GLUEBI=m -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=65536 -CONFIG_ATMEL_TCLIB=y -CONFIG_ATMEL_SSC=m -CONFIG_SENSORS_TSL2550=m -CONFIG_DS1682=m -CONFIG_RAID_ATTRS=m -CONFIG_SCSI=m -CONFIG_SCSI_TGT=m -# CONFIG_SCSI_PROC_FS is not set -CONFIG_BLK_DEV_SD=m -CONFIG_BLK_DEV_SR=m -CONFIG_CHR_DEV_SG=m -CONFIG_CHR_DEV_SCH=m -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SCAN_ASYNC=y -CONFIG_SCSI_ISCSI_ATTRS=m -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -CONFIG_BONDING=m -CONFIG_MACVLAN=m -CONFIG_EQUALIZER=m -CONFIG_TUN=m -CONFIG_VETH=m -CONFIG_PHYLIB=y -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_SMSC_PHY=m -CONFIG_BROADCOM_PHY=m -CONFIG_ICPLUS_PHY=m -CONFIG_MDIO_BITBANG=m -CONFIG_NET_ETHERNET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -CONFIG_USB_ZD1201=m -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -CONFIG_HOSTAP_FIRMWARE_NVRAM=y -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_PLUSB=m -CONFIG_USB_NET_MCS7830=m -CONFIG_USB_NET_RNDIS_HOST=m -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_EPSON2888=y -CONFIG_USB_KC2190=y -# CONFIG_USB_NET_ZAURUS is not set -CONFIG_INPUT_MOUSEDEV=m -CONFIG_INPUT_EVDEV=m -CONFIG_INPUT_EVBUG=m -CONFIG_KEYBOARD_LKKBD=m -CONFIG_KEYBOARD_GPIO=m -CONFIG_KEYBOARD_NEWTON=m -CONFIG_KEYBOARD_STOWAWAY=m -CONFIG_KEYBOARD_SUNKBD=m -CONFIG_KEYBOARD_XTKBD=m -CONFIG_MOUSE_PS2=m -CONFIG_MOUSE_SERIAL=m -CONFIG_MOUSE_APPLETOUCH=m -CONFIG_MOUSE_VSXXXAA=m -CONFIG_MOUSE_GPIO=m -CONFIG_INPUT_MISC=y -CONFIG_INPUT_UINPUT=m -CONFIG_SERIO_SERPORT=m -CONFIG_SERIO_RAW=m -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_N_HDLC=m -CONFIG_SPECIALIX=m -CONFIG_STALDRV=y -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_IPMI_HANDLER=m -CONFIG_IPMI_DEVICE_INTERFACE=m -CONFIG_IPMI_SI=m -CONFIG_IPMI_WATCHDOG=m -CONFIG_IPMI_POWEROFF=m -CONFIG_HW_RANDOM=y -CONFIG_R3964=m -CONFIG_RAW_DRIVER=m -CONFIG_TCG_TPM=m -CONFIG_TCG_NSC=m -CONFIG_TCG_ATMEL=m -CONFIG_I2C=m -CONFIG_I2C_CHARDEV=m -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -CONFIG_SPI_BITBANG=m -CONFIG_SPI_SPIDEV=m -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -CONFIG_SOUND=m -CONFIG_SND=m -CONFIG_SND_SEQUENCER=m -CONFIG_SND_SEQ_DUMMY=m -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -# CONFIG_SND_PCM_OSS_PLUGINS is not set -CONFIG_SND_SEQUENCER_OSS=y -CONFIG_SND_DYNAMIC_MINORS=y -# CONFIG_SND_VERBOSE_PROCFS is not set -CONFIG_SND_DUMMY=m -CONFIG_SND_VIRMIDI=m -CONFIG_SND_USB_AUDIO=m -CONFIG_SND_USB_CAIAQ=m -CONFIG_SND_USB_CAIAQ_INPUT=y -CONFIG_HID=m -CONFIG_HIDRAW=y -CONFIG_USB_HID=m -CONFIG_USB_HIDDEV=y -CONFIG_USB_KBD=m -CONFIG_USB_MOUSE=m -CONFIG_HID_A4TECH=m -CONFIG_HID_APPLE=m -CONFIG_HID_BELKIN=m -CONFIG_HID_CHERRY=m -CONFIG_HID_CHICONY=m -CONFIG_HID_CYPRESS=m -CONFIG_HID_EZKEY=m -CONFIG_HID_GYRATION=m -CONFIG_HID_LOGITECH=m -CONFIG_HID_MICROSOFT=m -CONFIG_HID_MONTEREY=m -CONFIG_HID_PANTHERLORD=m -CONFIG_HID_PETALYNX=m -CONFIG_HID_SAMSUNG=m -CONFIG_HID_SONY=m -CONFIG_HID_SUNPLUS=m -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DEVICE_CLASS is not set -CONFIG_USB_DYNAMIC_MINORS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=m -CONFIG_USB_STORAGE_DATAFAB=m -CONFIG_USB_STORAGE_FREECOM=m -CONFIG_USB_STORAGE_ISD200=m -CONFIG_USB_STORAGE_USBAT=m -CONFIG_USB_STORAGE_SDDR09=m -CONFIG_USB_STORAGE_SDDR55=m -CONFIG_USB_STORAGE_JUMPSHOT=m -CONFIG_USB_STORAGE_ALAUDA=m -CONFIG_USB_STORAGE_KARMA=m -CONFIG_USB_LIBUSUAL=y -CONFIG_USB_SERIAL=m -CONFIG_USB_EZUSB=y -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_PL2303=m -CONFIG_USB_SERIAL_SPCP8X5=m -CONFIG_USB_SERIAL_DEBUG=m -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -CONFIG_USB_ADUTUX=m -CONFIG_USB_TEST=m -CONFIG_USB_GADGET=m -CONFIG_USB_GADGET_DEBUG_FILES=y -CONFIG_USB_GADGET_DEBUG_FS=y -CONFIG_USB_ZERO=m -CONFIG_USB_ETH=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_USB_MIDI_GADGET=m -CONFIG_MMC=y -CONFIG_SDIO_UART=m -CONFIG_MMC_AT91=m -CONFIG_MMC_SPI=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=m -CONFIG_LEDS_GPIO=m -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=m -CONFIG_LEDS_TRIGGER_HEARTBEAT=m -CONFIG_RTC_CLASS=y -CONFIG_RTC_INTF_DEV_UIE_EMUL=y -CONFIG_RTC_DRV_DS1307=m -CONFIG_RTC_DRV_DS1305=y -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_JBD_DEBUG=y -CONFIG_REISERFS_FS=m -CONFIG_REISERFS_CHECK=y -CONFIG_REISERFS_PROC_INFO=y -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -CONFIG_INOTIFY=y -CONFIG_FUSE_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=y -CONFIG_NTFS_FS=m -CONFIG_NTFS_RW=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_JFFS2_FS=m -CONFIG_JFFS2_COMPRESSION_OPTIONS=y -CONFIG_JFFS2_LZO=y -CONFIG_JFFS2_CMODE_FAVOURLZO=y -CONFIG_CRAMFS=m -CONFIG_NFS_FS=m -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_NFSD=m -CONFIG_NFSD_V3_ACL=y -CONFIG_NFSD_V4=y -CONFIG_CIFS=m -CONFIG_CIFS_WEAK_PW_HASH=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_MAC_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -CONFIG_LDM_DEBUG=y -CONFIG_SGI_PARTITION=y -CONFIG_SUN_PARTITION=y -CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_UTF8=m -CONFIG_DLM=m -CONFIG_PRINTK_TIME=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_UNUSED_SYMBOLS=y -CONFIG_DEBUG_FS=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_CRYPTO=y -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_MD5=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set -CONFIG_CRC_CCITT=m -CONFIG_CRC16=m diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261_defconfig index b46025b..ade6b2f 100644 --- a/arch/arm/configs/at91sam9261ek_defconfig +++ b/arch/arm/configs/at91sam9261_defconfig @@ -1,9 +1,13 @@ CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set +CONFIG_KERNEL_LZMA=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y +CONFIG_NAMESPACES=y +CONFIG_EMBEDDED=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y @@ -15,18 +19,27 @@ CONFIG_ARCH_AT91SAM9261=y CONFIG_MACH_AT91SAM9261EK=y CONFIG_AT91_PROGRAMMABLE_CLOCKS=y # CONFIG_ARM_THUMB is not set +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y +CONFIG_AUTO_ZRELADDR=y +CONFIG_VFP=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y +CONFIG_IP_MULTICAST=y CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set +CONFIG_CFG80211=y +CONFIG_LIB80211=y +CONFIG_MAC80211=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y @@ -34,8 +47,12 @@ CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_GLUEBI=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_MISC_DEVICES=y +CONFIG_ATMEL_TCLIB=y CONFIG_ATMEL_SSC=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y @@ -45,12 +62,27 @@ CONFIG_NET_ETHERNET=y CONFIG_DM9000=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set +CONFIG_USB_ZD1201=m +CONFIG_RTL8187=m +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_USB=m +CONFIG_LIBERTAS_SDIO=m +CONFIG_LIBERTAS_SPI=m +CONFIG_RT2X00=m +CONFIG_RT2500USB=m +CONFIG_RT73USB=m +CONFIG_ZD1211RW=m +CONFIG_INPUT_POLLDEV=m # CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=240 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 +CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=y +CONFIG_DEVPTS_MULTIPLE_INSTANCES=y CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_HW_RANDOM=y @@ -65,31 +97,62 @@ CONFIG_WATCHDOG_NOWAYOUT=y CONFIG_AT91SAM9X_WATCHDOG=y CONFIG_FB=y CONFIG_FB_ATMEL=y -# CONFIG_VGA_CONSOLE is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +# CONFIG_LCD_CLASS_DEVICE is not set +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_ATMEL_LCDC=y +# CONFIG_BACKLIGHT_GENERIC is not set +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_LOGO=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +CONFIG_SND_AT73C213=y +CONFIG_SND_USB_AUDIO=m # CONFIG_USB_HID is not set CONFIG_USB=y CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y -CONFIG_USB_STORAGE_DEBUG=y CONFIG_USB_GADGET=y CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m CONFIG_USB_FILE_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y CONFIG_MMC_AT91=m +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_GPIO=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y +CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y -CONFIG_CRAMFS=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y +CONFIG_SQUASHFS=y +CONFIG_SQUASHFS_LZO=y +CONFIG_SQUASHFS_XZ=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y +CONFIG_NLS_ISO8859_15=y +CONFIG_NLS_UTF8=y +CONFIG_FTRACE=y +CONFIG_CRC_CCITT=m diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263_defconfig index 8a04d6f..1cf9626 100644 --- a/arch/arm/configs/at91sam9263ek_defconfig +++ b/arch/arm/configs/at91sam9263_defconfig @@ -1,9 +1,13 @@ CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set +CONFIG_KERNEL_LZMA=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y +CONFIG_NAMESPACES=y +CONFIG_EMBEDDED=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y @@ -13,53 +17,81 @@ CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_AT91=y CONFIG_ARCH_AT91SAM9263=y CONFIG_MACH_AT91SAM9263EK=y +CONFIG_MACH_USB_A9263=y +CONFIG_MACH_NEOCORE926=y CONFIG_MTD_AT91_DATAFLASH_CARD=y # CONFIG_ARM_THUMB is not set +CONFIG_AEABI=y +# CONFIG_OABI_COMPAT is not set CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw" -CONFIG_FPE_NWFPE=y +CONFIG_AUTO_ZRELADDR=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y +CONFIG_NET_KEY=y CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_ROUTE_VERBOSE=y CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y +CONFIG_NET_IPIP=y +CONFIG_IP_MROUTE=y +CONFIG_IP_PIMSM_V1=y +CONFIG_IP_PIMSM_V2=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set +CONFIG_IPV6=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y +CONFIG_NFTL=y +CONFIG_NFTL_RW=y CONFIG_MTD_DATAFLASH=y +CONFIG_MTD_BLOCK2MTD=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ATMEL=y +CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_GLUEBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_ATMEL_SSC=y +CONFIG_MISC_DEVICES=y +CONFIG_ATMEL_PWM=y +CONFIG_ATMEL_TCLIB=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y CONFIG_MII=y +CONFIG_SMSC_PHY=y +CONFIG_NET_ETHERNET=y CONFIG_MACB=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +CONFIG_USB_ZD1201=m +CONFIG_INPUT_POLLDEV=m # CONFIG_INPUT_MOUSEDEV_PSAUX is not set +CONFIG_INPUT_MOUSEDEV_SCREEN_X=240 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=y -# CONFIG_SERIO is not set +CONFIG_LEGACY_PTY_COUNT=4 CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y CONFIG_HW_RANDOM=y @@ -74,8 +106,25 @@ CONFIG_WATCHDOG_NOWAYOUT=y CONFIG_AT91SAM9X_WATCHDOG=y CONFIG_FB=y CONFIG_FB_ATMEL=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_ATMEL_LCDC=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y +CONFIG_LOGO=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SEQUENCER=y +CONFIG_SND_MIXER_OSS=y +CONFIG_SND_PCM_OSS=y +# CONFIG_SND_SUPPORT_OLD_API is not set +# CONFIG_SND_VERBOSE_PROCFS is not set +# CONFIG_SND_DRIVERS is not set +# CONFIG_SND_ARM is not set +CONFIG_SND_ATMEL_AC97C=y +# CONFIG_SND_SPI is not set +CONFIG_SND_USB_AUDIO=m CONFIG_USB=y CONFIG_USB_DEVICEFS=y CONFIG_USB_MON=y @@ -83,24 +132,37 @@ CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_ZERO=m +CONFIG_USB_ETH=m CONFIG_USB_GADGETFS=m CONFIG_USB_FILE_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y +CONFIG_SDIO_UART=m CONFIG_MMC_AT91=m +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_ATMEL_PWM=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y +CONFIG_FUSE_FS=m CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y +CONFIG_UBIFS_FS=y +CONFIG_UBIFS_FS_ADVANCED_COMPR=y CONFIG_CRAMFS=y CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +CONFIG_NFS_V3_ACL=y +CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_KERNEL=y +CONFIG_FTRACE=y CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y +CONFIG_XZ_DEC=y diff --git a/arch/arm/configs/exynos4_defconfig b/arch/arm/configs/exynos4_defconfig index 2ffba24..da53ff3 100644 --- a/arch/arm/configs/exynos4_defconfig +++ b/arch/arm/configs/exynos4_defconfig @@ -8,7 +8,9 @@ CONFIG_ARCH_EXYNOS4=y CONFIG_S3C_LOWLEVEL_UART_PORT=1 CONFIG_MACH_SMDKC210=y CONFIG_MACH_SMDKV310=y +CONFIG_MACH_ARMLEX4210=y CONFIG_MACH_UNIVERSAL_C210=y +CONFIG_MACH_NURI=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y diff --git a/arch/arm/configs/neocore926_defconfig b/arch/arm/configs/neocore926_defconfig deleted file mode 100644 index 462dd18..0000000 --- a/arch/arm/configs/neocore926_defconfig +++ /dev/null @@ -1,104 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_BLK_DEV_INITRD=y -# CONFIG_COMPAT_BRK is not set -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9263=y -CONFIG_MACH_NEOCORE926=y -CONFIG_MTD_AT91_DATAFLASH_CARD=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_FPE_NWFPE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_NET_KEY=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_NET_IPIP=y -# CONFIG_INET_LRO is not set -CONFIG_IPV6=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_NFTL=y -CONFIG_NFTL_RW=y -CONFIG_MTD_BLOCK2MTD=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ECC_SMC=y -CONFIG_MTD_NAND_VERIFY_WRITE=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_MTD_NAND_PLATFORM=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_NBD=y -CONFIG_ATMEL_PWM=y -CONFIG_ATMEL_TCLIB=y -CONFIG_SCSI=y -CONFIG_CHR_DEV_SG=y -CONFIG_NETDEVICES=y -CONFIG_SMSC_PHY=y -CONFIG_NET_ETHERNET=y -CONFIG_MACB=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_ADS7846=y -CONFIG_VT_HW_CONSOLE_BINDING=y -# CONFIG_DEVKMEM is not set -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -# CONFIG_SERIAL_ATMEL_PDC is not set -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -# CONFIG_HWMON is not set -CONFIG_VIDEO_OUTPUT_CONTROL=y -CONFIG_FB=y -CONFIG_FB_ATMEL=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_ATMEL_LCDC=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -CONFIG_LOGO=y -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_MMC=y -CONFIG_SDIO_UART=y -CONFIG_MMC_AT91=m -CONFIG_EXT2_FS=y -# CONFIG_DNOTIFY is not set -CONFIG_AUTOFS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_WBUF_VERIFY=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -# CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 076db52..d5f00d7 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -21,58 +21,22 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_OMAP=y -CONFIG_ARCH_OMAP2=y -CONFIG_ARCH_OMAP3=y -CONFIG_ARCH_OMAP4=y CONFIG_OMAP_RESET_CLOCKS=y CONFIG_OMAP_MUX_DEBUG=y -CONFIG_OMAP_32K_TIMER=y -CONFIG_MACH_OMAP_GENERIC=y -CONFIG_ARCH_OMAP2420=y -CONFIG_ARCH_OMAP2430=y -CONFIG_ARCH_OMAP3430=y -CONFIG_MACH_OMAP_H4=y -CONFIG_MACH_OMAP_APOLLON=y -CONFIG_MACH_OMAP_2430SDP=y -CONFIG_MACH_OMAP3_BEAGLE=y -CONFIG_MACH_DEVKIT8000=y -CONFIG_MACH_OMAP_LDP=y -CONFIG_MACH_OVERO=y -CONFIG_MACH_OMAP3EVM=y -CONFIG_MACH_OMAP3517EVM=y -CONFIG_MACH_OMAP3_PANDORA=y -CONFIG_MACH_OMAP3_TOUCHBOOK=y -CONFIG_MACH_OMAP_3430SDP=y -CONFIG_MACH_NOKIA_N8X0=y -CONFIG_MACH_NOKIA_RX51=y -CONFIG_MACH_OMAP_ZOOM2=y -CONFIG_MACH_OMAP_ZOOM3=y -CONFIG_MACH_CM_T35=y -CONFIG_MACH_IGEP0020=y -CONFIG_MACH_SBC3530=y -CONFIG_MACH_OMAP_3630SDP=y -CONFIG_MACH_OMAP_4430SDP=y CONFIG_ARM_THUMBEE=y -CONFIG_ARM_L1_CACHE_SHIFT=5 CONFIG_ARM_ERRATA_411920=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y CONFIG_NR_CPUS=2 -# CONFIG_LOCAL_TIMERS is not set -CONFIG_AEABI=y CONFIG_LEDS=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_CMDLINE="root=/dev/mmcblk0p2 rootwait console=ttyO2,115200" CONFIG_KEXEC=y CONFIG_FPE_NWFPE=y -CONFIG_VFP=y -CONFIG_NEON=y CONFIG_BINFMT_MISC=y -CONFIG_PM=y CONFIG_PM_DEBUG=y -CONFIG_PM_RUNTIME=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -89,14 +53,6 @@ CONFIG_IP_PNP_RARP=y # CONFIG_IPV6 is not set CONFIG_NETFILTER=y CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m -CONFIG_BT_RFCOMM=y -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_HIDP=m CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y CONFIG_BT_HCIUART_BCSP=y @@ -107,11 +63,9 @@ CONFIG_CFG80211=m CONFIG_MAC80211=m CONFIG_MAC80211_RC_PID=y CONFIG_MAC80211_RC_DEFAULT_PID=y -CONFIG_MAC80211_LEDS=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_CONNECTOR=y CONFIG_MTD=y -CONFIG_MTD_CONCAT=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -127,7 +81,6 @@ CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_EEPROM_LEGACY=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y @@ -158,19 +111,15 @@ CONFIG_TOUCHSCREEN_ADS7846=y CONFIG_INPUT_MISC=y CONFIG_INPUT_TWL4030_PWRBUTTON=y CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250_NR_UARTS=32 CONFIG_SERIAL_8250_EXTENDED=y CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y -# CONFIG_LEGACY_PTYS is not set CONFIG_HW_RANDOM=y -CONFIG_I2C=y CONFIG_I2C_CHARDEV=y -CONFIG_I2C_OMAP=y CONFIG_SPI=y CONFIG_SPI_OMAP24XX=y CONFIG_DEBUG_GPIO=y @@ -181,10 +130,6 @@ CONFIG_POWER_SUPPLY=y CONFIG_WATCHDOG=y CONFIG_OMAP_WATCHDOG=y CONFIG_TWL4030_WATCHDOG=y -CONFIG_MENELAUS=y -CONFIG_TWL4030_CORE=y -CONFIG_TWL4030_POWER=y -CONFIG_REGULATOR=y CONFIG_REGULATOR_TWL4030=y CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y @@ -208,7 +153,6 @@ CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_PLATFORM=y CONFIG_DISPLAY_SUPPORT=y -# CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y CONFIG_FONTS=y @@ -217,25 +161,20 @@ CONFIG_FONT_8x16=y CONFIG_LOGO=y CONFIG_SOUND=m CONFIG_SND=m -CONFIG_SND_MIXER_OSS=y -CONFIG_SND_PCM_OSS=y +CONFIG_SND_MIXER_OSS=m +CONFIG_SND_PCM_OSS=m CONFIG_SND_VERBOSE_PRINTK=y CONFIG_SND_DEBUG=y -CONFIG_SND_USB_AUDIO=y -CONFIG_SND_SOC=y -CONFIG_SND_OMAP_SOC=y -CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y +CONFIG_SND_USB_AUDIO=m +CONFIG_SND_SOC=m +CONFIG_SND_OMAP_SOC=m +CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m CONFIG_USB=y CONFIG_USB_DEBUG=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_DEVICEFS=y CONFIG_USB_SUSPEND=y -# CONFIG_USB_OTG_WHITELIST is not set CONFIG_USB_MON=y -# CONFIG_USB_MUSB_HDRC is not set -# CONFIG_USB_MUSB_OTG is not set -# CONFIG_USB_GADGET_MUSB_HDRC is not set -CONFIG_USB_MUSB_DEBUG=y CONFIG_USB_WDM=y CONFIG_USB_STORAGE=y CONFIG_USB_LIBUSUAL=y @@ -250,18 +189,12 @@ CONFIG_MMC_UNSAFE_RESUME=y CONFIG_SDIO_UART=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_TWL92330=y CONFIG_RTC_DRV_TWL4030=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y CONFIG_QUOTA=y CONFIG_QFMT_V2=y CONFIG_MSDOS_FS=y @@ -285,12 +218,10 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y CONFIG_SCHEDSTATS=y CONFIG_TIMER_STATS=y CONFIG_PROVE_LOCKING=y -# CONFIG_LOCK_STAT is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y diff --git a/arch/arm/configs/s5p6442_defconfig b/arch/arm/configs/s5p6442_defconfig deleted file mode 100644 index 0e92a78..0000000 --- a/arch/arm/configs/s5p6442_defconfig +++ /dev/null @@ -1,65 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_KALLSYMS_ALL=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_S5P6442=y -CONFIG_S3C_LOWLEVEL_UART_PORT=1 -CONFIG_MACH_SMDK6442=y -CONFIG_CPU_32v6K=y -CONFIG_AEABI=y -CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc" -CONFIG_FPE_NWFPE=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_NR_UARTS=3 -CONFIG_SERIAL_SAMSUNG=y -CONFIG_SERIAL_SAMSUNG_CONSOLE=y -CONFIG_HW_RANDOM=y -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_CRAMFS=y -CONFIG_ROMFS_FS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_BSD_DISKLABEL=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_RT_MUTEXES=y -CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_MUTEXES=y -CONFIG_DEBUG_SPINLOCK_SLEEP=y -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -# CONFIG_ARM_UNWIND is not set -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -CONFIG_DEBUG_S3C_UART=1 -CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/usb-a9263_defconfig b/arch/arm/configs/usb-a9263_defconfig deleted file mode 100644 index ee82d09..0000000 --- a/arch/arm/configs/usb-a9263_defconfig +++ /dev/null @@ -1,106 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_AT91=y -CONFIG_ARCH_AT91SAM9263=y -CONFIG_MACH_USB_A9263=y -CONFIG_AT91_SLOW_CLOCK=y -# CONFIG_ARM_THUMB is not set -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyS0,115200" -CONFIG_FPE_NWFPE=y -CONFIG_PM=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_PNP_RARP=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_DATAFLASH=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ATMEL=y -CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y -CONFIG_BLK_DEV_LOOP=y -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_SCSI_MULTI_LUN=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MACB=y -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_EVBUG=y -# CONFIG_KEYBOARD_ATKBD is not set -CONFIG_KEYBOARD_GPIO=y -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_ATMEL=y -CONFIG_SERIAL_ATMEL_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_SPI=y -CONFIG_SPI_ATMEL=y -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_USB_HID is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_ETH=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_EXT2_FS=y -CONFIG_INOTIFY=y -CONFIG_FUSE_FS=m -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -# CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/include/asm/bitops.h b/arch/arm/include/asm/bitops.h index 6b7403f..b4892a0 100644 --- a/arch/arm/include/asm/bitops.h +++ b/arch/arm/include/asm/bitops.h @@ -203,8 +203,6 @@ extern int _find_next_bit_be(const unsigned long *p, int size, int offset); #define find_first_bit(p,sz) _find_first_bit_le(p,sz) #define find_next_bit(p,sz,off) _find_next_bit_le(p,sz,off) -#define WORD_BITOFF_TO_LE(x) ((x)) - #else /* * These are the big endian, atomic definitions. @@ -214,8 +212,6 @@ extern int _find_next_bit_be(const unsigned long *p, int size, int offset); #define find_first_bit(p,sz) _find_first_bit_be(p,sz) #define find_next_bit(p,sz,off) _find_next_bit_be(p,sz,off) -#define WORD_BITOFF_TO_LE(x) ((x) ^ 0x18) - #endif #if __LINUX_ARM_ARCH__ < 5 @@ -287,55 +283,29 @@ static inline int fls(int x) #include <asm-generic/bitops/hweight.h> #include <asm-generic/bitops/lock.h> -static inline void __set_bit_le(int nr, void *addr) -{ - __set_bit(WORD_BITOFF_TO_LE(nr), addr); -} - -static inline void __clear_bit_le(int nr, void *addr) -{ - __clear_bit(WORD_BITOFF_TO_LE(nr), addr); -} - -static inline int __test_and_set_bit_le(int nr, void *addr) -{ - return __test_and_set_bit(WORD_BITOFF_TO_LE(nr), addr); -} - -static inline int test_and_set_bit_le(int nr, void *addr) -{ - return test_and_set_bit(WORD_BITOFF_TO_LE(nr), addr); -} - -static inline int __test_and_clear_bit_le(int nr, void *addr) -{ - return __test_and_clear_bit(WORD_BITOFF_TO_LE(nr), addr); -} - -static inline int test_and_clear_bit_le(int nr, void *addr) -{ - return test_and_clear_bit(WORD_BITOFF_TO_LE(nr), addr); -} - -static inline int test_bit_le(int nr, const void *addr) -{ - return test_bit(WORD_BITOFF_TO_LE(nr), addr); -} +#ifdef __ARMEB__ static inline int find_first_zero_bit_le(const void *p, unsigned size) { return _find_first_zero_bit_le(p, size); } +#define find_first_zero_bit_le find_first_zero_bit_le static inline int find_next_zero_bit_le(const void *p, int size, int offset) { return _find_next_zero_bit_le(p, size, offset); } +#define find_next_zero_bit_le find_next_zero_bit_le static inline int find_next_bit_le(const void *p, int size, int offset) { return _find_next_bit_le(p, size, offset); } +#define find_next_bit_le find_next_bit_le + +#endif + +#include <asm-generic/bitops/le.h> /* * Ext2 is defined to use little-endian byte ordering. diff --git a/arch/arm/include/asm/fiq.h b/arch/arm/include/asm/fiq.h index 2242ce2..d493d0b 100644 --- a/arch/arm/include/asm/fiq.h +++ b/arch/arm/include/asm/fiq.h @@ -4,6 +4,13 @@ * Support for FIQ on ARM architectures. * Written by Philip Blundell <philb@gnu.org>, 1998 * Re-written by Russell King + * + * NOTE: The FIQ mode registers are not magically preserved across + * suspend/resume. + * + * Drivers which require these registers to be preserved across power + * management operations must implement appropriate suspend/resume handlers to + * save and restore them. */ #ifndef __ASM_FIQ_H @@ -29,9 +36,21 @@ struct fiq_handler { extern int claim_fiq(struct fiq_handler *f); extern void release_fiq(struct fiq_handler *f); extern void set_fiq_handler(void *start, unsigned int length); -extern void set_fiq_regs(struct pt_regs *regs); -extern void get_fiq_regs(struct pt_regs *regs); extern void enable_fiq(int fiq); extern void disable_fiq(int fiq); +/* helpers defined in fiqasm.S: */ +extern void __set_fiq_regs(unsigned long const *regs); +extern void __get_fiq_regs(unsigned long *regs); + +static inline void set_fiq_regs(struct pt_regs const *regs) +{ + __set_fiq_regs(®s->ARM_r8); +} + +static inline void get_fiq_regs(struct pt_regs *regs) +{ + __get_fiq_regs(®s->ARM_r8); +} + #endif diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index bf13b81..946f4d7 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -18,6 +18,8 @@ struct machine_desc { unsigned int nr; /* architecture number */ const char *name; /* architecture name */ unsigned long boot_params; /* tagged list */ + const char **dt_compat; /* array of device tree + * 'compatible' strings */ unsigned int nr_irqs; /* number of IRQs */ @@ -48,6 +50,13 @@ struct machine_desc { extern struct machine_desc *machine_desc; /* + * Machine type table - also only accessible during boot + */ +extern struct machine_desc __arch_info_begin[], __arch_info_end[]; +#define for_each_machine_desc(p) \ + for (p = __arch_info_begin; p < __arch_info_end; p++) + +/* * Set of macros to define architecture features. This is built into * a table by the linker. */ diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h index f51a695..ac75d08 100644 --- a/arch/arm/include/asm/page.h +++ b/arch/arm/include/asm/page.h @@ -197,7 +197,7 @@ typedef unsigned long pgprot_t; typedef struct page *pgtable_t; -#ifndef CONFIG_SPARSEMEM +#ifdef CONFIG_HAVE_ARCH_PFN_VALID extern int pfn_valid(unsigned long); #endif diff --git a/arch/arm/include/asm/prom.h b/arch/arm/include/asm/prom.h new file mode 100644 index 0000000..11b8708 --- /dev/null +++ b/arch/arm/include/asm/prom.h @@ -0,0 +1,37 @@ +/* + * arch/arm/include/asm/prom.h + * + * Copyright (C) 2009 Canonical Ltd. <jeremy.kerr@canonical.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +#ifndef __ASMARM_PROM_H +#define __ASMARM_PROM_H + +#ifdef CONFIG_OF + +#include <asm/setup.h> +#include <asm/irq.h> + +static inline void irq_dispose_mapping(unsigned int virq) +{ + return; +} + +extern struct machine_desc *setup_machine_fdt(unsigned int dt_phys); +extern void arm_dt_memblock_reserve(void); + +#else /* CONFIG_OF */ + +static inline struct machine_desc *setup_machine_fdt(unsigned int dt_phys) +{ + return NULL; +} + +static inline void arm_dt_memblock_reserve(void) { } + +#endif /* CONFIG_OF */ +#endif /* ASMARM_PROM_H */ diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index 95176af..ee2ad8a 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -217,6 +217,10 @@ extern struct meminfo meminfo; #define bank_phys_end(bank) ((bank)->start + (bank)->size) #define bank_phys_size(bank) (bank)->size +extern int arm_add_memory(phys_addr_t start, unsigned long size); +extern void early_print(const char *str, ...); +extern void dump_machine_table(void); + #endif /* __KERNEL__ */ #endif diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index d2b514f..e42d96a 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -70,6 +70,7 @@ extern void platform_smp_prepare_cpus(unsigned int); */ struct secondary_data { unsigned long pgdir; + unsigned long swapper_pg_dir; void *stack; }; extern struct secondary_data secondary_data; diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 0c5fc55..2c04ed5 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -400,7 +400,8 @@ #define __NR_open_by_handle_at (__NR_SYSCALL_BASE+371) #define __NR_clock_adjtime (__NR_SYSCALL_BASE+372) #define __NR_syncfs (__NR_SYSCALL_BASE+373) -#define __NR_setns (__NR_SYSCALL_BASE+374) +#define __NR_sendmmsg (__NR_SYSCALL_BASE+374) +#define __NR_setns (__NR_SYSCALL_BASE+375) /* * The following SWIs are ARM private. diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 8d95446..a5b31af 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -24,7 +24,7 @@ obj-$(CONFIG_OC_ETM) += etm.o obj-$(CONFIG_ISA_DMA_API) += dma.o obj-$(CONFIG_ARCH_ACORN) += ecard.o -obj-$(CONFIG_FIQ) += fiq.o +obj-$(CONFIG_FIQ) += fiq.o fiqasm.o obj-$(CONFIG_MODULES) += armksyms.o module.o obj-$(CONFIG_ARTHUR) += arthur.o obj-$(CONFIG_ISA_DMA) += dma-isa.o @@ -44,6 +44,7 @@ obj-$(CONFIG_ARM_THUMBEE) += thumbee.o obj-$(CONFIG_KGDB) += kgdb.o obj-$(CONFIG_ARM_UNWIND) += unwind.o obj-$(CONFIG_HAVE_TCM) += tcm.o +obj-$(CONFIG_OF) += devtree.o obj-$(CONFIG_CRASH_DUMP) += crash_dump.o obj-$(CONFIG_SWP_EMULATE) += swp_emulate.o CFLAGS_swp_emulate.o := -Wa,-march=armv7-a diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index a05f759..80f7896 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -383,7 +383,8 @@ CALL(sys_open_by_handle_at) CALL(sys_clock_adjtime) CALL(sys_syncfs) - CALL(sys_setns) + CALL(sys_sendmmsg) +/* 375 */ CALL(sys_setns) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c new file mode 100644 index 0000000..a701e42 --- /dev/null +++ b/arch/arm/kernel/devtree.c @@ -0,0 +1,145 @@ +/* + * linux/arch/arm/kernel/devtree.c + * + * Copyright (C) 2009 Canonical Ltd. <jeremy.kerr@canonical.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/types.h> +#include <linux/bootmem.h> +#include <linux/memblock.h> +#include <linux/of.h> +#include <linux/of_fdt.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> + +#include <asm/setup.h> +#include <asm/page.h> +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +void __init early_init_dt_add_memory_arch(u64 base, u64 size) +{ + arm_add_memory(base, size); +} + +void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align) +{ + return alloc_bootmem_align(size, align); +} + +void __init arm_dt_memblock_reserve(void) +{ + u64 *reserve_map, base, size; + + if (!initial_boot_params) + return; + + /* Reserve the dtb region */ + memblock_reserve(virt_to_phys(initial_boot_params), + be32_to_cpu(initial_boot_params->totalsize)); + + /* + * Process the reserve map. This will probably overlap the initrd + * and dtb locations which are already reserved, but overlaping + * doesn't hurt anything + */ + reserve_map = ((void*)initial_boot_params) + + be32_to_cpu(initial_boot_params->off_mem_rsvmap); + while (1) { + base = be64_to_cpup(reserve_map++); + size = be64_to_cpup(reserve_map++); + if (!size) + break; + memblock_reserve(base, size); + } +} + +/** + * setup_machine_fdt - Machine setup when an dtb was passed to the kernel + * @dt_phys: physical address of dt blob + * + * If a dtb was passed to the kernel in r2, then use it to choose the + * correct machine_desc and to setup the system. + */ +struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys) +{ + struct boot_param_header *devtree; + struct machine_desc *mdesc, *mdesc_best = NULL; + unsigned int score, mdesc_score = ~1; + unsigned long dt_root; + const char *model; + + devtree = phys_to_virt(dt_phys); + + /* check device tree validity */ + if (be32_to_cpu(devtree->magic) != OF_DT_HEADER) + return NULL; + + /* Search the mdescs for the 'best' compatible value match */ + initial_boot_params = devtree; + dt_root = of_get_flat_dt_root(); + for_each_machine_desc(mdesc) { + score = of_flat_dt_match(dt_root, mdesc->dt_compat); + if (score > 0 && score < mdesc_score) { + mdesc_best = mdesc; + mdesc_score = score; + } + } + if (!mdesc_best) { + const char *prop; + long size; + + early_print("\nError: unrecognized/unsupported " + "device tree compatible list:\n[ "); + + prop = of_get_flat_dt_prop(dt_root, "compatible", &size); + while (size > 0) { + early_print("'%s' ", prop); + size -= strlen(prop) + 1; + prop += strlen(prop) + 1; + } + early_print("]\n\n"); + + dump_machine_table(); /* does not return */ + } + + model = of_get_flat_dt_prop(dt_root, "model", NULL); + if (!model) + model = of_get_flat_dt_prop(dt_root, "compatible", NULL); + if (!model) + model = "<unknown>"; + pr_info("Machine: %s, model: %s\n", mdesc_best->name, model); + + /* Retrieve various information from the /chosen node */ + of_scan_flat_dt(early_init_dt_scan_chosen, boot_command_line); + /* Initialize {size,address}-cells info */ + of_scan_flat_dt(early_init_dt_scan_root, NULL); + /* Setup memory, calling early_init_dt_add_memory_arch */ + of_scan_flat_dt(early_init_dt_scan_memory, NULL); + + /* Change machine number to match the mdesc we're using */ + __machine_arch_type = mdesc_best->nr; + + return mdesc_best; +} + +/** + * irq_create_of_mapping - Hook to resolve OF irq specifier into a Linux irq# + * + * Currently the mapping mechanism is trivial; simple flat hwirq numbers are + * mapped 1:1 onto Linux irq numbers. Cascaded irq controllers are not + * supported. + */ +unsigned int irq_create_of_mapping(struct device_node *controller, + const u32 *intspec, unsigned int intsize) +{ + return intspec[0]; +} +EXPORT_SYMBOL_GPL(irq_create_of_mapping); diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c index e72dc34..4c164ec 100644 --- a/arch/arm/kernel/fiq.c +++ b/arch/arm/kernel/fiq.c @@ -89,47 +89,6 @@ void set_fiq_handler(void *start, unsigned int length) flush_icache_range(0x1c, 0x1c + length); } -/* - * Taking an interrupt in FIQ mode is death, so both these functions - * disable irqs for the duration. Note - these functions are almost - * entirely coded in assembly. - */ -void __naked set_fiq_regs(struct pt_regs *regs) -{ - register unsigned long tmp; - asm volatile ( - "mov ip, sp\n\ - stmfd sp!, {fp, ip, lr, pc}\n\ - sub fp, ip, #4\n\ - mrs %0, cpsr\n\ - msr cpsr_c, %2 @ select FIQ mode\n\ - mov r0, r0\n\ - ldmia %1, {r8 - r14}\n\ - msr cpsr_c, %0 @ return to SVC mode\n\ - mov r0, r0\n\ - ldmfd sp, {fp, sp, pc}" - : "=&r" (tmp) - : "r" (®s->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE)); -} - -void __naked get_fiq_regs(struct pt_regs *regs) -{ - register unsigned long tmp; - asm volatile ( - "mov ip, sp\n\ - stmfd sp!, {fp, ip, lr, pc}\n\ - sub fp, ip, #4\n\ - mrs %0, cpsr\n\ - msr cpsr_c, %2 @ select FIQ mode\n\ - mov r0, r0\n\ - stmia %1, {r8 - r14}\n\ - msr cpsr_c, %0 @ return to SVC mode\n\ - mov r0, r0\n\ - ldmfd sp, {fp, sp, pc}" - : "=&r" (tmp) - : "r" (®s->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE)); -} - int claim_fiq(struct fiq_handler *f) { int ret = 0; @@ -174,8 +133,8 @@ void disable_fiq(int fiq) } EXPORT_SYMBOL(set_fiq_handler); -EXPORT_SYMBOL(set_fiq_regs); -EXPORT_SYMBOL(get_fiq_regs); +EXPORT_SYMBOL(__set_fiq_regs); /* defined in fiqasm.S */ +EXPORT_SYMBOL(__get_fiq_regs); /* defined in fiqasm.S */ EXPORT_SYMBOL(claim_fiq); EXPORT_SYMBOL(release_fiq); EXPORT_SYMBOL(enable_fiq); diff --git a/arch/arm/kernel/fiqasm.S b/arch/arm/kernel/fiqasm.S new file mode 100644 index 0000000..207f9d6 --- /dev/null +++ b/arch/arm/kernel/fiqasm.S @@ -0,0 +1,49 @@ +/* + * linux/arch/arm/kernel/fiqasm.S + * + * Derived from code originally in linux/arch/arm/kernel/fiq.c: + * + * Copyright (C) 1998 Russell King + * Copyright (C) 1998, 1999 Phil Blundell + * Copyright (C) 2011, Linaro Limited + * + * FIQ support written by Philip Blundell <philb@gnu.org>, 1998. + * + * FIQ support re-written by Russell King to be more generic + * + * v7/Thumb-2 compatibility modifications by Linaro Limited, 2011. + */ + +#include <linux/linkage.h> +#include <asm/assembler.h> + +/* + * Taking an interrupt in FIQ mode is death, so both these functions + * disable irqs for the duration. + */ + +ENTRY(__set_fiq_regs) + mov r2, #PSR_I_BIT | PSR_F_BIT | FIQ_MODE + mrs r1, cpsr + msr cpsr_c, r2 @ select FIQ mode + mov r0, r0 @ avoid hazard prior to ARMv4 + ldmia r0!, {r8 - r12} + ldr sp, [r0], #4 + ldr lr, [r0] + msr cpsr_c, r1 @ return to SVC mode + mov r0, r0 @ avoid hazard prior to ARMv4 + mov pc, lr +ENDPROC(__set_fiq_regs) + +ENTRY(__get_fiq_regs) + mov r2, #PSR_I_BIT | PSR_F_BIT | FIQ_MODE + mrs r1, cpsr + msr cpsr_c, r2 @ select FIQ mode + mov r0, r0 @ avoid hazard prior to ARMv4 + stmia r0!, {r8 - r12} + str sp, [r0], #4 + str lr, [r0] + msr cpsr_c, r1 @ return to SVC mode + mov r0, r0 @ avoid hazard prior to ARMv4 + mov pc, lr +ENDPROC(__get_fiq_regs) diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index c84b57d..854bd22 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -15,6 +15,12 @@ #define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2) #define ATAG_CORE_SIZE_EMPTY ((2*4) >> 2) +#ifdef CONFIG_CPU_BIG_ENDIAN +#define OF_DT_MAGIC 0xd00dfeed +#else +#define OF_DT_MAGIC 0xedfe0dd0 /* 0xd00dfeed in big-endian */ +#endif + /* * Exception handling. Something went wrong and we can't proceed. We * ought to tell the user, but since we don't have any guarantee that @@ -28,20 +34,26 @@ /* Determine validity of the r2 atags pointer. The heuristic requires * that the pointer be aligned, in the first 16k of physical RAM and - * that the ATAG_CORE marker is first and present. Future revisions + * that the ATAG_CORE marker is first and present. If CONFIG_OF_FLATTREE + * is selected, then it will also accept a dtb pointer. Future revisions * of this function may be more lenient with the physical address and * may also be able to move the ATAGS block if necessary. * * Returns: - * r2 either valid atags pointer, or zero + * r2 either valid atags pointer, valid dtb pointer, or zero * r5, r6 corrupted */ __vet_atags: tst r2, #0x3 @ aligned? bne 1f - ldr r5, [r2, #0] @ is first tag ATAG_CORE? - cmp r5, #ATAG_CORE_SIZE + ldr r5, [r2, #0] +#ifdef CONFIG_OF_FLATTREE + ldr r6, =OF_DT_MAGIC @ is it a DTB? + cmp r5, r6 + beq 2f +#endif + cmp r5, #ATAG_CORE_SIZE @ is first tag ATAG_CORE? cmpne r5, #ATAG_CORE_SIZE_EMPTY bne 1f ldr r5, [r2, #4] @@ -49,7 +61,7 @@ __vet_atags: cmp r5, r6 bne 1f - mov pc, lr @ atag pointer is ok +2: mov pc, lr @ atag/dtb pointer is ok 1: mov r2, #0 mov pc, lr @@ -61,7 +73,7 @@ ENDPROC(__vet_atags) * * r0 = cp#15 control register * r1 = machine ID - * r2 = atags pointer + * r2 = atags/dtb pointer * r9 = processor ID */ __INIT diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index c9173cf..278c1b0 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -59,7 +59,7 @@ * * This is normally called from the decompressor code. The requirements * are: MMU = off, D-cache = off, I-cache = dont care, r0 = 0, - * r1 = machine nr, r2 = atags pointer. + * r1 = machine nr, r2 = atags or dtb pointer. * * This code is mostly position independent, so if you link the kernel at * 0xc0008000, you call this at __pa(0xc0008000). @@ -91,7 +91,7 @@ ENTRY(stext) #endif /* - * r1 = machine no, r2 = atags, + * r1 = machine no, r2 = atags or dtb, * r8 = phys_offset, r9 = cpuid, r10 = procinfo */ bl __vet_atags @@ -113,6 +113,7 @@ ENTRY(stext) ldr r13, =__mmap_switched @ address to jump to after @ mmu has been enabled adr lr, BSYM(1f) @ return (PIC) address + mov r8, r4 @ set TTBR1 to swapper_pg_dir ARM( add pc, r10, #PROCINFO_INITFUNC ) THUMB( add r12, r10, #PROCINFO_INITFUNC ) THUMB( mov pc, r12 ) @@ -302,8 +303,10 @@ ENTRY(secondary_startup) */ adr r4, __secondary_data ldmia r4, {r5, r7, r12} @ address to jump to after - sub r4, r4, r5 @ mmu has been enabled - ldr r4, [r7, r4] @ get secondary_data.pgdir + sub lr, r4, r5 @ mmu has been enabled + ldr r4, [r7, lr] @ get secondary_data.pgdir + add r7, r7, #4 + ldr r8, [r7, lr] @ get secondary_data.swapper_pg_dir adr lr, BSYM(__enable_mmu) @ return address mov r13, r12 @ __secondary_switched address ARM( add pc, r10, #PROCINFO_INITFUNC ) @ initialise processor @@ -339,7 +342,7 @@ __secondary_data: * * r0 = cp#15 control register * r1 = machine ID - * r2 = atags pointer + * r2 = atags or dtb pointer * r4 = page table pointer * r9 = processor ID * r13 = *virtual* address to jump to upon completion @@ -376,7 +379,7 @@ ENDPROC(__enable_mmu) * * r0 = cp#15 control register * r1 = machine ID - * r2 = atags pointer + * r2 = atags or dtb pointer * r9 = processor ID * r13 = *virtual* address to jump to upon completion * diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 6dce209..ed11fb0 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -20,6 +20,7 @@ #include <linux/screen_info.h> #include <linux/init.h> #include <linux/kexec.h> +#include <linux/of_fdt.h> #include <linux/crash_dump.h> #include <linux/root_dev.h> #include <linux/cpu.h> @@ -42,6 +43,7 @@ #include <asm/cachetype.h> #include <asm/tlbflush.h> +#include <asm/prom.h> #include <asm/mach/arch.h> #include <asm/mach/irq.h> #include <asm/mach/time.h> @@ -309,7 +311,7 @@ static void __init cacheid_init(void) */ extern struct proc_info_list *lookup_processor_type(unsigned int); -static void __init early_print(const char *str, ...) +void __init early_print(const char *str, ...) { extern void printascii(const char *); char buf[256]; @@ -439,25 +441,12 @@ void cpu_init(void) : "r14"); } -static struct machine_desc * __init setup_machine(unsigned int nr) +void __init dump_machine_table(void) { - extern struct machine_desc __arch_info_begin[], __arch_info_end[]; struct machine_desc *p; - /* - * locate machine in the list of supported machines. - */ - for (p = __arch_info_begin; p < __arch_info_end; p++) - if (nr == p->nr) { - printk("Machine: %s\n", p->name); - return p; - } - - early_print("\n" - "Error: unrecognized/unsupported machine ID (r1 = 0x%08x).\n\n" - "Available machine support:\n\nID (hex)\tNAME\n", nr); - - for (p = __arch_info_begin; p < __arch_info_end; p++) + early_print("Available machine support:\n\nID (hex)\tNAME\n"); + for_each_machine_desc(p) early_print("%08x\t%s\n", p->nr, p->name); early_print("\nPlease check your kernel config and/or bootloader.\n"); @@ -466,7 +455,7 @@ static struct machine_desc * __init setup_machine(unsigned int nr) /* can't use cpu_relax() here as it may require MMU setup */; } -static int __init arm_add_memory(phys_addr_t start, unsigned long size) +int __init arm_add_memory(phys_addr_t start, unsigned long size) { struct membank *bank = &meminfo.bank[meminfo.nr_banks]; @@ -801,23 +790,29 @@ static void __init squash_mem_tags(struct tag *tag) tag->hdr.tag = ATAG_NONE; } -void __init setup_arch(char **cmdline_p) +static struct machine_desc * __init setup_machine_tags(unsigned int nr) { struct tag *tags = (struct tag *)&init_tags; - struct machine_desc *mdesc; + struct machine_desc *mdesc = NULL, *p; char *from = default_command_line; init_tags.mem.start = PHYS_OFFSET; - unwind_init(); - - setup_processor(); - mdesc = setup_machine(machine_arch_type); - machine_desc = mdesc; - machine_name = mdesc->name; + /* + * locate machine in the list of supported machines. + */ + for_each_machine_desc(p) + if (nr == p->nr) { + printk("Machine: %s\n", p->name); + mdesc = p; + break; + } - if (mdesc->soft_reboot) - reboot_setup("s"); + if (!mdesc) { + early_print("\nError: unrecognized/unsupported machine ID" + " (r1 = 0x%08x).\n\n", nr); + dump_machine_table(); /* does not return */ + } if (__atags_pointer) tags = phys_to_virt(__atags_pointer); @@ -849,8 +844,17 @@ void __init setup_arch(char **cmdline_p) if (tags->hdr.tag != ATAG_CORE) convert_to_tag_list(tags); #endif - if (tags->hdr.tag != ATAG_CORE) + + if (tags->hdr.tag != ATAG_CORE) { +#if defined(CONFIG_OF) + /* + * If CONFIG_OF is set, then assume this is a reasonably + * modern system that should pass boot parameters + */ + early_print("Warning: Neither atags nor dtb found\n"); +#endif tags = (struct tag *)&init_tags; + } if (mdesc->fixup) mdesc->fixup(mdesc, tags, &from, &meminfo); @@ -862,14 +866,34 @@ void __init setup_arch(char **cmdline_p) parse_tags(tags); } + /* parse_early_param needs a boot_command_line */ + strlcpy(boot_command_line, from, COMMAND_LINE_SIZE); + + return mdesc; +} + + +void __init setup_arch(char **cmdline_p) +{ + struct machine_desc *mdesc; + + unwind_init(); + + setup_processor(); + mdesc = setup_machine_fdt(__atags_pointer); + if (!mdesc) + mdesc = setup_machine_tags(machine_arch_type); + machine_desc = mdesc; + machine_name = mdesc->name; + + if (mdesc->soft_reboot) + reboot_setup("s"); + init_mm.start_code = (unsigned long) _text; init_mm.end_code = (unsigned long) _etext; init_mm.end_data = (unsigned long) _edata; init_mm.brk = (unsigned long) _end; - /* parse_early_param needs a boot_command_line */ - strlcpy(boot_command_line, from, COMMAND_LINE_SIZE); - /* populate cmd_line too for later use, preserving boot_command_line */ strlcpy(cmd_line, boot_command_line, COMMAND_LINE_SIZE); *cmdline_p = cmd_line; @@ -881,6 +905,8 @@ void __init setup_arch(char **cmdline_p) paging_init(mdesc); request_standard_resources(mdesc); + unflatten_device_tree(); + #ifdef CONFIG_SMP if (is_smp()) smp_init_cpus(); diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index d439a8f..344e52b 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -105,6 +105,7 @@ int __cpuinit __cpu_up(unsigned int cpu) */ secondary_data.stack = task_stack_page(idle) + THREAD_START_SP; secondary_data.pgdir = virt_to_phys(pgd); + secondary_data.swapper_pg_dir = virt_to_phys(swapper_pg_dir); __cpuc_flush_dcache_area(&secondary_data, sizeof(secondary_data)); outer_clean_range(__pa(&secondary_data), __pa(&secondary_data + 1)); diff --git a/arch/arm/lib/lib1funcs.S b/arch/arm/lib/lib1funcs.S index 6dc0648..c562f64 100644 --- a/arch/arm/lib/lib1funcs.S +++ b/arch/arm/lib/lib1funcs.S @@ -35,7 +35,7 @@ Boston, MA 02111-1307, USA. */ #include <linux/linkage.h> #include <asm/assembler.h> - +#include <asm/unwind.h> .macro ARM_DIV_BODY dividend, divisor, result, curbit @@ -207,6 +207,7 @@ Boston, MA 02111-1307, USA. */ ENTRY(__udivsi3) ENTRY(__aeabi_uidiv) +UNWIND(.fnstart) subs r2, r1, #1 moveq pc, lr @@ -230,10 +231,12 @@ ENTRY(__aeabi_uidiv) mov r0, r0, lsr r2 mov pc, lr +UNWIND(.fnend) ENDPROC(__udivsi3) ENDPROC(__aeabi_uidiv) ENTRY(__umodsi3) +UNWIND(.fnstart) subs r2, r1, #1 @ compare divisor with 1 bcc Ldiv0 @@ -247,10 +250,12 @@ ENTRY(__umodsi3) mov pc, lr +UNWIND(.fnend) ENDPROC(__umodsi3) ENTRY(__divsi3) ENTRY(__aeabi_idiv) +UNWIND(.fnstart) cmp r1, #0 eor ip, r0, r1 @ save the sign of the result. @@ -287,10 +292,12 @@ ENTRY(__aeabi_idiv) rsbmi r0, r0, #0 mov pc, lr +UNWIND(.fnend) ENDPROC(__divsi3) ENDPROC(__aeabi_idiv) ENTRY(__modsi3) +UNWIND(.fnstart) cmp r1, #0 beq Ldiv0 @@ -310,11 +317,14 @@ ENTRY(__modsi3) rsbmi r0, r0, #0 mov pc, lr +UNWIND(.fnend) ENDPROC(__modsi3) #ifdef CONFIG_AEABI ENTRY(__aeabi_uidivmod) +UNWIND(.fnstart) +UNWIND(.save {r0, r1, ip, lr} ) stmfd sp!, {r0, r1, ip, lr} bl __aeabi_uidiv @@ -323,10 +333,12 @@ ENTRY(__aeabi_uidivmod) sub r1, r1, r3 mov pc, lr +UNWIND(.fnend) ENDPROC(__aeabi_uidivmod) ENTRY(__aeabi_idivmod) - +UNWIND(.fnstart) +UNWIND(.save {r0, r1, ip, lr} ) stmfd sp!, {r0, r1, ip, lr} bl __aeabi_idiv ldmfd sp!, {r1, r2, ip, lr} @@ -334,15 +346,18 @@ ENTRY(__aeabi_idivmod) sub r1, r1, r3 mov pc, lr +UNWIND(.fnend) ENDPROC(__aeabi_idivmod) #endif Ldiv0: - +UNWIND(.fnstart) +UNWIND(.pad #4) +UNWIND(.save {lr}) str lr, [sp, #-8]! bl __div0 mov r0, #0 @ About as wrong as it could be. ldr pc, [sp], #8 - - +UNWIND(.fnend) +ENDPROC(Ldiv0) diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 2d299bf..2248467 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -3,9 +3,6 @@ if ARCH_AT91 config HAVE_AT91_DATAFLASH_CARD bool -config HAVE_NAND_ATMEL_BUSWIDTH_16 - bool - config HAVE_AT91_USART3 bool @@ -85,11 +82,6 @@ config ARCH_AT91CAP9 select HAVE_FB_ATMEL select HAVE_NET_MACB -config ARCH_AT572D940HF - bool "AT572D940HF" - select CPU_ARM926T - select GENERIC_CLOCKEVENTS - config ARCH_AT91X40 bool "AT91x40" select ARCH_USES_GETTIMEOFFSET @@ -209,7 +201,6 @@ comment "AT91SAM9260 / AT91SAM9XE Board Type" config MACH_AT91SAM9260EK bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933> @@ -270,7 +261,6 @@ comment "AT91SAM9261 Board Type" config MACH_AT91SAM9261EK bool "Atmel AT91SAM9261-EK Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820> @@ -286,7 +276,6 @@ comment "AT91SAM9G10 Board Type" config MACH_AT91SAM9G10EK bool "Atmel AT91SAM9G10-EK Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit. <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588> @@ -302,7 +291,6 @@ comment "AT91SAM9263 Board Type" config MACH_AT91SAM9263EK bool "Atmel AT91SAM9263-EK Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit. <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057> @@ -343,7 +331,6 @@ comment "AT91SAM9G20 Board Type" config MACH_AT91SAM9G20EK bool "Atmel AT91SAM9G20-EK Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit that embeds only one SD/MMC slot. @@ -351,7 +338,6 @@ config MACH_AT91SAM9G20EK config MACH_AT91SAM9G20EK_2MMC depends on MACH_AT91SAM9G20EK bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots" - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and @@ -416,7 +402,6 @@ comment "AT91SAM9G45 Board Type" config MACH_AT91SAM9M10G45EK bool "Atmel AT91SAM9M10G45-EK Evaluation Kits" - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit. "ES" at the end of the name means that this board is an @@ -433,7 +418,6 @@ comment "AT91CAP9 Board Type" config MACH_AT91CAP9ADK bool "Atmel AT91CAP9A-DK Evaluation Kit" select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 help Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit. <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138> @@ -442,23 +426,6 @@ endif # ---------------------------------------------------------- -if ARCH_AT572D940HF - -comment "AT572D940HF Board Type" - -config MACH_AT572D940HFEB - bool "AT572D940HF-EK" - depends on ARCH_AT572D940HF - select HAVE_AT91_DATAFLASH_CARD - select HAVE_NAND_ATMEL_BUSWIDTH_16 - help - Select this if you are using Atmel's AT572D940HF-EK evaluation kit. - <http://www.atmel.com/products/diopsis/default.asp> - -endif - -# ---------------------------------------------------------- - if ARCH_AT91X40 comment "AT91X40 Board Type" @@ -483,13 +450,6 @@ config MTD_AT91_DATAFLASH_CARD help Enable support for the DataFlash card. -config MTD_NAND_ATMEL_BUSWIDTH_16 - bool "Enable 16-bit data bus interface to NAND flash" - depends on HAVE_NAND_ATMEL_BUSWIDTH_16 - help - On AT91SAM926x boards both types of NAND flash can be present - (8 and 16 bit data bus width). - # ---------------------------------------------------------- comment "AT91 Feature Selections" diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index a83835e..9696623 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -19,7 +19,6 @@ obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devi obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o at91sam9_alt_reset.o obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o -obj-$(CONFIG_ARCH_AT572D940HF) += at572d940hf.o at91sam926x_time.o at572d940hf_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o # AT91RM9200 board-specific support @@ -78,9 +77,6 @@ obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o # AT91CAP9 board-specific support obj-$(CONFIG_MACH_AT91CAP9ADK) += board-cap9adk.o -# AT572D940HF board-specific support -obj-$(CONFIG_MACH_AT572D940HFEB) += board-at572d940hf_ek.o - # AT91X40 board-specific support obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o diff --git a/arch/arm/mach-at91/at572d940hf.c b/arch/arm/mach-at91/at572d940hf.c deleted file mode 100644 index a6b9c68..0000000 --- a/arch/arm/mach-at91/at572d940hf.c +++ /dev/null @@ -1,377 +0,0 @@ -/* - * arch/arm/mach-at91/at572d940hf.c - * - * Antonio R. Costa <costa.antonior@gmail.com> - * Copyright (C) 2008 Atmel - * - * Copyright (C) 2005 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include <linux/module.h> - -#include <asm/mach/irq.h> -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <mach/at572d940hf.h> -#include <mach/at91_pmc.h> -#include <mach/at91_rstc.h> - -#include "generic.h" -#include "clock.h" - -static struct map_desc at572d940hf_io_desc[] __initdata = { - { - .virtual = AT91_VA_BASE_SYS, - .pfn = __phys_to_pfn(AT91_BASE_SYS), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = AT91_IO_VIRT_BASE - AT572D940HF_SRAM_SIZE, - .pfn = __phys_to_pfn(AT572D940HF_SRAM_BASE), - .length = AT572D940HF_SRAM_SIZE, - .type = MT_DEVICE, - }, -}; - -/* -------------------------------------------------------------------- - * Clocks - * -------------------------------------------------------------------- */ - -/* - * The peripheral clocks. - */ -static struct clk pioA_clk = { - .name = "pioA_clk", - .pmc_mask = 1 << AT572D940HF_ID_PIOA, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioB_clk = { - .name = "pioB_clk", - .pmc_mask = 1 << AT572D940HF_ID_PIOB, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk pioC_clk = { - .name = "pioC_clk", - .pmc_mask = 1 << AT572D940HF_ID_PIOC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk macb_clk = { - .name = "macb_clk", - .pmc_mask = 1 << AT572D940HF_ID_EMAC, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart0_clk = { - .name = "usart0_clk", - .pmc_mask = 1 << AT572D940HF_ID_US0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart1_clk = { - .name = "usart1_clk", - .pmc_mask = 1 << AT572D940HF_ID_US1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk usart2_clk = { - .name = "usart2_clk", - .pmc_mask = 1 << AT572D940HF_ID_US2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mmc_clk = { - .name = "mci_clk", - .pmc_mask = 1 << AT572D940HF_ID_MCI, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk udc_clk = { - .name = "udc_clk", - .pmc_mask = 1 << AT572D940HF_ID_UDP, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk twi0_clk = { - .name = "twi0_clk", - .pmc_mask = 1 << AT572D940HF_ID_TWI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi0_clk = { - .name = "spi0_clk", - .pmc_mask = 1 << AT572D940HF_ID_SPI0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk spi1_clk = { - .name = "spi1_clk", - .pmc_mask = 1 << AT572D940HF_ID_SPI1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc0_clk = { - .name = "ssc0_clk", - .pmc_mask = 1 << AT572D940HF_ID_SSC0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc1_clk = { - .name = "ssc1_clk", - .pmc_mask = 1 << AT572D940HF_ID_SSC1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc2_clk = { - .name = "ssc2_clk", - .pmc_mask = 1 << AT572D940HF_ID_SSC2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc0_clk = { - .name = "tc0_clk", - .pmc_mask = 1 << AT572D940HF_ID_TC0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc1_clk = { - .name = "tc1_clk", - .pmc_mask = 1 << AT572D940HF_ID_TC1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk tc2_clk = { - .name = "tc2_clk", - .pmc_mask = 1 << AT572D940HF_ID_TC2, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ohci_clk = { - .name = "ohci_clk", - .pmc_mask = 1 << AT572D940HF_ID_UHP, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk ssc3_clk = { - .name = "ssc3_clk", - .pmc_mask = 1 << AT572D940HF_ID_SSC3, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk twi1_clk = { - .name = "twi1_clk", - .pmc_mask = 1 << AT572D940HF_ID_TWI1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk can0_clk = { - .name = "can0_clk", - .pmc_mask = 1 << AT572D940HF_ID_CAN0, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk can1_clk = { - .name = "can1_clk", - .pmc_mask = 1 << AT572D940HF_ID_CAN1, - .type = CLK_TYPE_PERIPHERAL, -}; -static struct clk mAgicV_clk = { - .name = "mAgicV_clk", - .pmc_mask = 1 << AT572D940HF_ID_MSIRQ0, - .type = CLK_TYPE_PERIPHERAL, -}; - - -static struct clk *periph_clocks[] __initdata = { - &pioA_clk, - &pioB_clk, - &pioC_clk, - &macb_clk, - &usart0_clk, - &usart1_clk, - &usart2_clk, - &mmc_clk, - &udc_clk, - &twi0_clk, - &spi0_clk, - &spi1_clk, - &ssc0_clk, - &ssc1_clk, - &ssc2_clk, - &tc0_clk, - &tc1_clk, - &tc2_clk, - &ohci_clk, - &ssc3_clk, - &twi1_clk, - &can0_clk, - &can1_clk, - &mAgicV_clk, - /* irq0 .. irq2 */ -}; - -/* - * The five programmable clocks. - * You must configure pin multiplexing to bring these signals out. - */ -static struct clk pck0 = { - .name = "pck0", - .pmc_mask = AT91_PMC_PCK0, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 0, -}; -static struct clk pck1 = { - .name = "pck1", - .pmc_mask = AT91_PMC_PCK1, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 1, -}; -static struct clk pck2 = { - .name = "pck2", - .pmc_mask = AT91_PMC_PCK2, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 2, -}; -static struct clk pck3 = { - .name = "pck3", - .pmc_mask = AT91_PMC_PCK3, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 3, -}; - -static struct clk mAgicV_mem_clk = { - .name = "mAgicV_mem_clk", - .pmc_mask = AT91_PMC_PCK4, - .type = CLK_TYPE_PROGRAMMABLE, - .id = 4, -}; - -/* HClocks */ -static struct clk hck0 = { - .name = "hck0", - .pmc_mask = AT91_PMC_HCK0, - .type = CLK_TYPE_SYSTEM, - .id = 0, -}; -static struct clk hck1 = { - .name = "hck1", - .pmc_mask = AT91_PMC_HCK1, - .type = CLK_TYPE_SYSTEM, - .id = 1, -}; - -static void __init at572d940hf_register_clocks(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) - clk_register(periph_clocks[i]); - - clk_register(&pck0); - clk_register(&pck1); - clk_register(&pck2); - clk_register(&pck3); - clk_register(&mAgicV_mem_clk); - - clk_register(&hck0); - clk_register(&hck1); -} - -/* -------------------------------------------------------------------- - * GPIO - * -------------------------------------------------------------------- */ - -static struct at91_gpio_bank at572d940hf_gpio[] = { - { - .id = AT572D940HF_ID_PIOA, - .offset = AT91_PIOA, - .clock = &pioA_clk, - }, { - .id = AT572D940HF_ID_PIOB, - .offset = AT91_PIOB, - .clock = &pioB_clk, - }, { - .id = AT572D940HF_ID_PIOC, - .offset = AT91_PIOC, - .clock = &pioC_clk, - } -}; - -static void at572d940hf_reset(void) -{ - at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); -} - - -/* -------------------------------------------------------------------- - * AT572D940HF processor initialization - * -------------------------------------------------------------------- */ - -void __init at572d940hf_initialize(unsigned long main_clock) -{ - /* Map peripherals */ - iotable_init(at572d940hf_io_desc, ARRAY_SIZE(at572d940hf_io_desc)); - - at91_arch_reset = at572d940hf_reset; - at91_extern_irq = (1 << AT572D940HF_ID_IRQ0) | (1 << AT572D940HF_ID_IRQ1) - | (1 << AT572D940HF_ID_IRQ2); - - /* Init clock subsystem */ - at91_clock_init(main_clock); - - /* Register the processor-specific clocks */ - at572d940hf_register_clocks(); - - /* Register GPIO subsystem */ - at91_gpio_init(at572d940hf_gpio, 3); -} - -/* -------------------------------------------------------------------- - * Interrupt initialization - * -------------------------------------------------------------------- */ - -/* - * The default interrupt priority levels (0 = lowest, 7 = highest). - */ -static unsigned int at572d940hf_default_irq_priority[NR_AIC_IRQS] __initdata = { - 7, /* Advanced Interrupt Controller */ - 7, /* System Peripherals */ - 0, /* Parallel IO Controller A */ - 0, /* Parallel IO Controller B */ - 0, /* Parallel IO Controller C */ - 3, /* Ethernet */ - 6, /* USART 0 */ - 6, /* USART 1 */ - 6, /* USART 2 */ - 0, /* Multimedia Card Interface */ - 4, /* USB Device Port */ - 0, /* Two-Wire Interface 0 */ - 6, /* Serial Peripheral Interface 0 */ - 6, /* Serial Peripheral Interface 1 */ - 5, /* Serial Synchronous Controller 0 */ - 5, /* Serial Synchronous Controller 1 */ - 5, /* Serial Synchronous Controller 2 */ - 0, /* Timer Counter 0 */ - 0, /* Timer Counter 1 */ - 0, /* Timer Counter 2 */ - 3, /* USB Host port */ - 3, /* Serial Synchronous Controller 3 */ - 0, /* Two-Wire Interface 1 */ - 0, /* CAN Controller 0 */ - 0, /* CAN Controller 1 */ - 0, /* mAgicV HALT line */ - 0, /* mAgicV SIRQ0 line */ - 0, /* mAgicV exception line */ - 0, /* mAgicV end of DMA line */ - 0, /* Advanced Interrupt Controller */ - 0, /* Advanced Interrupt Controller */ - 0, /* Advanced Interrupt Controller */ -}; - -void __init at572d940hf_init_interrupts(unsigned int priority[NR_AIC_IRQS]) -{ - if (!priority) - priority = at572d940hf_default_irq_priority; - - /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); - - /* Enable GPIO interrupts */ - at91_gpio_irq_setup(); -} - diff --git a/arch/arm/mach-at91/at572d940hf_devices.c b/arch/arm/mach-at91/at572d940hf_devices.c deleted file mode 100644 index 0fc20a2..0000000 --- a/arch/arm/mach-at91/at572d940hf_devices.c +++ /dev/null @@ -1,970 +0,0 @@ -/* - * arch/arm/mach-at91/at572d940hf_devices.c - * - * Copyright (C) 2008 Atmel Antonio R. Costa <costa.antonior@gmail.com> - * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org> - * Copyright (C) 2005 David Brownell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> - -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> - -#include <mach/board.h> -#include <mach/gpio.h> -#include <mach/at572d940hf.h> -#include <mach/at572d940hf_matrix.h> -#include <mach/at91sam9_smc.h> - -#include "generic.h" -#include "sam9_smc.h" - - -/* -------------------------------------------------------------------- - * USB Host - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) -static u64 ohci_dmamask = DMA_BIT_MASK(32); -static struct at91_usbh_data usbh_data; - -static struct resource usbh_resources[] = { - [0] = { - .start = AT572D940HF_UHP_BASE, - .end = AT572D940HF_UHP_BASE + SZ_1M - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_UHP, - .end = AT572D940HF_ID_UHP, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_usbh_device = { - .name = "at91_ohci", - .id = -1, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &usbh_data, - }, - .resource = usbh_resources, - .num_resources = ARRAY_SIZE(usbh_resources), -}; - -void __init at91_add_device_usbh(struct at91_usbh_data *data) -{ - if (!data) - return; - - usbh_data = *data; - platform_device_register(&at572d940hf_usbh_device); - -} -#else -void __init at91_add_device_usbh(struct at91_usbh_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * USB Device (Gadget) - * -------------------------------------------------------------------- */ - -#ifdef CONFIG_USB_GADGET_AT91 -static struct at91_udc_data udc_data; - -static struct resource udc_resources[] = { - [0] = { - .start = AT572D940HF_BASE_UDP, - .end = AT572D940HF_BASE_UDP + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_UDP, - .end = AT572D940HF_ID_UDP, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_udc_device = { - .name = "at91_udc", - .id = -1, - .dev = { - .platform_data = &udc_data, - }, - .resource = udc_resources, - .num_resources = ARRAY_SIZE(udc_resources), -}; - -void __init at91_add_device_udc(struct at91_udc_data *data) -{ - if (!data) - return; - - if (data->vbus_pin) { - at91_set_gpio_input(data->vbus_pin, 0); - at91_set_deglitch(data->vbus_pin, 1); - } - - /* Pullup pin is handled internally */ - - udc_data = *data; - platform_device_register(&at572d940hf_udc_device); -} -#else -void __init at91_add_device_udc(struct at91_udc_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * Ethernet - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE) -static u64 eth_dmamask = DMA_BIT_MASK(32); -static struct at91_eth_data eth_data; - -static struct resource eth_resources[] = { - [0] = { - .start = AT572D940HF_BASE_EMAC, - .end = AT572D940HF_BASE_EMAC + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_EMAC, - .end = AT572D940HF_ID_EMAC, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_eth_device = { - .name = "macb", - .id = -1, - .dev = { - .dma_mask = ð_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = ð_data, - }, - .resource = eth_resources, - .num_resources = ARRAY_SIZE(eth_resources), -}; - -void __init at91_add_device_eth(struct at91_eth_data *data) -{ - if (!data) - return; - - if (data->phy_irq_pin) { - at91_set_gpio_input(data->phy_irq_pin, 0); - at91_set_deglitch(data->phy_irq_pin, 1); - } - - /* Only RMII is supported */ - data->is_rmii = 1; - - /* Pins used for RMII */ - at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXCK_EREFCK */ - at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */ - at91_set_A_periph(AT91_PIN_PA18, 0); /* ERX0 */ - at91_set_A_periph(AT91_PIN_PA19, 0); /* ERX1 */ - at91_set_A_periph(AT91_PIN_PA20, 0); /* ERXER */ - at91_set_A_periph(AT91_PIN_PA23, 0); /* ETXEN */ - at91_set_A_periph(AT91_PIN_PA21, 0); /* ETX0 */ - at91_set_A_periph(AT91_PIN_PA22, 0); /* ETX1 */ - at91_set_A_periph(AT91_PIN_PA13, 0); /* EMDIO */ - at91_set_A_periph(AT91_PIN_PA14, 0); /* EMDC */ - - eth_data = *data; - platform_device_register(&at572d940hf_eth_device); -} -#else -void __init at91_add_device_eth(struct at91_eth_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * MMC / SD - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) -static u64 mmc_dmamask = DMA_BIT_MASK(32); -static struct at91_mmc_data mmc_data; - -static struct resource mmc_resources[] = { - [0] = { - .start = AT572D940HF_BASE_MCI, - .end = AT572D940HF_BASE_MCI + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_MCI, - .end = AT572D940HF_ID_MCI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_mmc_device = { - .name = "at91_mci", - .id = -1, - .dev = { - .dma_mask = &mmc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &mmc_data, - }, - .resource = mmc_resources, - .num_resources = ARRAY_SIZE(mmc_resources), -}; - -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) -{ - if (!data) - return; - - /* input/irq */ - if (data->det_pin) { - at91_set_gpio_input(data->det_pin, 1); - at91_set_deglitch(data->det_pin, 1); - } - if (data->wp_pin) - at91_set_gpio_input(data->wp_pin, 1); - if (data->vcc_pin) - at91_set_gpio_output(data->vcc_pin, 0); - - /* CLK */ - at91_set_A_periph(AT91_PIN_PC22, 0); - - /* CMD */ - at91_set_A_periph(AT91_PIN_PC23, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PC24, 1); - if (data->wire4) { - at91_set_A_periph(AT91_PIN_PC25, 1); - at91_set_A_periph(AT91_PIN_PC26, 1); - at91_set_A_periph(AT91_PIN_PC27, 1); - } - - mmc_data = *data; - platform_device_register(&at572d940hf_mmc_device); -} -#else -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * NAND / SmartMedia - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE) -static struct atmel_nand_data nand_data; - -#define NAND_BASE AT91_CHIPSELECT_3 - -static struct resource nand_resources[] = { - { - .start = NAND_BASE, - .end = NAND_BASE + SZ_256M - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at572d940hf_nand_device = { - .name = "atmel_nand", - .id = -1, - .dev = { - .platform_data = &nand_data, - }, - .resource = nand_resources, - .num_resources = ARRAY_SIZE(nand_resources), -}; - -void __init at91_add_device_nand(struct atmel_nand_data *data) -{ - unsigned long csa; - - if (!data) - return; - - csa = at91_sys_read(AT91_MATRIX_EBICSA); - at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA); - - /* enable pin */ - if (data->enable_pin) - at91_set_gpio_output(data->enable_pin, 1); - - /* ready/busy pin */ - if (data->rdy_pin) - at91_set_gpio_input(data->rdy_pin, 1); - - /* card detect pin */ - if (data->det_pin) - at91_set_gpio_input(data->det_pin, 1); - - at91_set_A_periph(AT91_PIN_PB28, 0); /* A[22] */ - at91_set_B_periph(AT91_PIN_PA28, 0); /* NANDOE */ - at91_set_B_periph(AT91_PIN_PA29, 0); /* NANDWE */ - - nand_data = *data; - platform_device_register(&at572d940hf_nand_device); -} - -#else -void __init at91_add_device_nand(struct atmel_nand_data *data) {} -#endif - - -/* -------------------------------------------------------------------- - * TWI (i2c) - * -------------------------------------------------------------------- */ - -/* - * Prefer the GPIO code since the TWI controller isn't robust - * (gets overruns and underruns under load) and can only issue - * repeated STARTs in one scenario (the driver doesn't yet handle them). - */ - -#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) - -static struct i2c_gpio_platform_data pdata = { - .sda_pin = AT91_PIN_PC7, - .sda_is_open_drain = 1, - .scl_pin = AT91_PIN_PC8, - .scl_is_open_drain = 1, - .udelay = 2, /* ~100 kHz */ -}; - -static struct platform_device at572d940hf_twi_device { - .name = "i2c-gpio", - .id = -1, - .dev.platform_data = &pdata, -}; - -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -{ - at91_set_GPIO_periph(AT91_PIN_PC7, 1); /* TWD (SDA) */ - at91_set_multi_drive(AT91_PIN_PC7, 1); - - at91_set_GPIO_periph(AT91_PIN_PA8, 1); /* TWCK (SCL) */ - at91_set_multi_drive(AT91_PIN_PC8, 1); - - i2c_register_board_info(0, devices, nr_devices); - platform_device_register(&at572d940hf_twi_device); -} - -#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE) - -static struct resource twi0_resources[] = { - [0] = { - .start = AT572D940HF_BASE_TWI0, - .end = AT572D940HF_BASE_TWI0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_TWI0, - .end = AT572D940HF_ID_TWI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_twi0_device = { - .name = "at91_i2c", - .id = 0, - .resource = twi0_resources, - .num_resources = ARRAY_SIZE(twi0_resources), -}; - -static struct resource twi1_resources[] = { - [0] = { - .start = AT572D940HF_BASE_TWI1, - .end = AT572D940HF_BASE_TWI1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_TWI1, - .end = AT572D940HF_ID_TWI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_twi1_device = { - .name = "at91_i2c", - .id = 1, - .resource = twi1_resources, - .num_resources = ARRAY_SIZE(twi1_resources), -}; - -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) -{ - /* pins used for TWI0 interface */ - at91_set_A_periph(AT91_PIN_PC7, 0); /* TWD */ - at91_set_multi_drive(AT91_PIN_PC7, 1); - - at91_set_A_periph(AT91_PIN_PC8, 0); /* TWCK */ - at91_set_multi_drive(AT91_PIN_PC8, 1); - - /* pins used for TWI1 interface */ - at91_set_A_periph(AT91_PIN_PC20, 0); /* TWD */ - at91_set_multi_drive(AT91_PIN_PC20, 1); - - at91_set_A_periph(AT91_PIN_PC21, 0); /* TWCK */ - at91_set_multi_drive(AT91_PIN_PC21, 1); - - i2c_register_board_info(0, devices, nr_devices); - platform_device_register(&at572d940hf_twi0_device); - platform_device_register(&at572d940hf_twi1_device); -} -#else -void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {} -#endif - - -/* -------------------------------------------------------------------- - * SPI - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE) -static u64 spi_dmamask = DMA_BIT_MASK(32); - -static struct resource spi0_resources[] = { - [0] = { - .start = AT572D940HF_BASE_SPI0, - .end = AT572D940HF_BASE_SPI0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_SPI0, - .end = AT572D940HF_ID_SPI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_spi0_device = { - .name = "atmel_spi", - .id = 0, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi0_resources, - .num_resources = ARRAY_SIZE(spi0_resources), -}; - -static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 }; - -static struct resource spi1_resources[] = { - [0] = { - .start = AT572D940HF_BASE_SPI1, - .end = AT572D940HF_BASE_SPI1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_SPI1, - .end = AT572D940HF_ID_SPI1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_spi1_device = { - .name = "atmel_spi", - .id = 1, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .resource = spi1_resources, - .num_resources = ARRAY_SIZE(spi1_resources), -}; - -static const unsigned spi1_standard_cs[4] = { AT91_PIN_PC3, AT91_PIN_PC4, AT91_PIN_PC5, AT91_PIN_PC6 }; - -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) -{ - int i; - unsigned long cs_pin; - short enable_spi0 = 0; - short enable_spi1 = 0; - - /* Choose SPI chip-selects */ - for (i = 0; i < nr_devices; i++) { - if (devices[i].controller_data) - cs_pin = (unsigned long) devices[i].controller_data; - else if (devices[i].bus_num == 0) - cs_pin = spi0_standard_cs[devices[i].chip_select]; - else - cs_pin = spi1_standard_cs[devices[i].chip_select]; - - if (devices[i].bus_num == 0) - enable_spi0 = 1; - else - enable_spi1 = 1; - - /* enable chip-select pin */ - at91_set_gpio_output(cs_pin, 1); - - /* pass chip-select pin to driver */ - devices[i].controller_data = (void *) cs_pin; - } - - spi_register_board_info(devices, nr_devices); - - /* Configure SPI bus(es) */ - if (enable_spi0) { - at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */ - at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ - at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - - at91_clock_associate("spi0_clk", &at572d940hf_spi0_device.dev, "spi_clk"); - platform_device_register(&at572d940hf_spi0_device); - } - if (enable_spi1) { - at91_set_A_periph(AT91_PIN_PC0, 0); /* SPI1_MISO */ - at91_set_A_periph(AT91_PIN_PC1, 0); /* SPI1_MOSI */ - at91_set_A_periph(AT91_PIN_PC2, 0); /* SPI1_SPCK */ - - at91_clock_associate("spi1_clk", &at572d940hf_spi1_device.dev, "spi_clk"); - platform_device_register(&at572d940hf_spi1_device); - } -} -#else -void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {} -#endif - - -/* -------------------------------------------------------------------- - * Timer/Counter blocks - * -------------------------------------------------------------------- */ - -#ifdef CONFIG_ATMEL_TCLIB - -static struct resource tcb_resources[] = { - [0] = { - .start = AT572D940HF_BASE_TCB, - .end = AT572D940HF_BASE_TCB + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_TC0, - .end = AT572D940HF_ID_TC0, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = AT572D940HF_ID_TC1, - .end = AT572D940HF_ID_TC1, - .flags = IORESOURCE_IRQ, - }, - [3] = { - .start = AT572D940HF_ID_TC2, - .end = AT572D940HF_ID_TC2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at572d940hf_tcb_device = { - .name = "atmel_tcb", - .id = 0, - .resource = tcb_resources, - .num_resources = ARRAY_SIZE(tcb_resources), -}; - -static void __init at91_add_device_tc(void) -{ - /* this chip has a separate clock and irq for each TC channel */ - at91_clock_associate("tc0_clk", &at572d940hf_tcb_device.dev, "t0_clk"); - at91_clock_associate("tc1_clk", &at572d940hf_tcb_device.dev, "t1_clk"); - at91_clock_associate("tc2_clk", &at572d940hf_tcb_device.dev, "t2_clk"); - platform_device_register(&at572d940hf_tcb_device); -} -#else -static void __init at91_add_device_tc(void) { } -#endif - - -/* -------------------------------------------------------------------- - * RTT - * -------------------------------------------------------------------- */ - -static struct resource rtt_resources[] = { - { - .start = AT91_BASE_SYS + AT91_RTT, - .end = AT91_BASE_SYS + AT91_RTT + SZ_16 - 1, - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device at572d940hf_rtt_device = { - .name = "at91_rtt", - .id = 0, - .resource = rtt_resources, - .num_resources = ARRAY_SIZE(rtt_resources), -}; - -static void __init at91_add_device_rtt(void) -{ - platform_device_register(&at572d940hf_rtt_device); -} - - -/* -------------------------------------------------------------------- - * Watchdog - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE) -static struct platform_device at572d940hf_wdt_device = { - .name = "at91_wdt", - .id = -1, - .num_resources = 0, -}; - -static void __init at91_add_device_watchdog(void) -{ - platform_device_register(&at572d940hf_wdt_device); -} -#else -static void __init at91_add_device_watchdog(void) {} -#endif - - -/* -------------------------------------------------------------------- - * UART - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_SERIAL_ATMEL) -static struct resource dbgu_resources[] = { - [0] = { - .start = AT91_VA_BASE_SYS + AT91_DBGU, - .end = AT91_VA_BASE_SYS + AT91_DBGU + SZ_512 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data dbgu_data = { - .use_dma_tx = 0, - .use_dma_rx = 0, /* DBGU not capable of receive DMA */ - .regs = (void __iomem *)(AT91_VA_BASE_SYS + AT91_DBGU), -}; - -static u64 dbgu_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at572d940hf_dbgu_device = { - .name = "atmel_usart", - .id = 0, - .dev = { - .dma_mask = &dbgu_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &dbgu_data, - }, - .resource = dbgu_resources, - .num_resources = ARRAY_SIZE(dbgu_resources), -}; - -static inline void configure_dbgu_pins(void) -{ - at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */ - at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */ -} - -static struct resource uart0_resources[] = { - [0] = { - .start = AT572D940HF_BASE_US0, - .end = AT572D940HF_BASE_US0 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_US0, - .end = AT572D940HF_ID_US0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart0_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart0_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at572d940hf_uart0_device = { - .name = "atmel_usart", - .id = 1, - .dev = { - .dma_mask = &uart0_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart0_data, - }, - .resource = uart0_resources, - .num_resources = ARRAY_SIZE(uart0_resources), -}; - -static inline void configure_usart0_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PA8, 1); /* TXD0 */ - at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */ - - if (pins & ATMEL_UART_RTS) - at91_set_A_periph(AT91_PIN_PA10, 0); /* RTS0 */ - if (pins & ATMEL_UART_CTS) - at91_set_A_periph(AT91_PIN_PA9, 0); /* CTS0 */ -} - -static struct resource uart1_resources[] = { - [0] = { - .start = AT572D940HF_BASE_US1, - .end = AT572D940HF_BASE_US1 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_US1, - .end = AT572D940HF_ID_US1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart1_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart1_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at572d940hf_uart1_device = { - .name = "atmel_usart", - .id = 2, - .dev = { - .dma_mask = &uart1_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart1_data, - }, - .resource = uart1_resources, - .num_resources = ARRAY_SIZE(uart1_resources), -}; - -static inline void configure_usart1_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PC10, 1); /* TXD1 */ - at91_set_A_periph(AT91_PIN_PC9 , 0); /* RXD1 */ - - if (pins & ATMEL_UART_RTS) - at91_set_A_periph(AT91_PIN_PC12, 0); /* RTS1 */ - if (pins & ATMEL_UART_CTS) - at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS1 */ -} - -static struct resource uart2_resources[] = { - [0] = { - .start = AT572D940HF_BASE_US2, - .end = AT572D940HF_BASE_US2 + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = AT572D940HF_ID_US2, - .end = AT572D940HF_ID_US2, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct atmel_uart_data uart2_data = { - .use_dma_tx = 1, - .use_dma_rx = 1, -}; - -static u64 uart2_dmamask = DMA_BIT_MASK(32); - -static struct platform_device at572d940hf_uart2_device = { - .name = "atmel_usart", - .id = 3, - .dev = { - .dma_mask = &uart2_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &uart2_data, - }, - .resource = uart2_resources, - .num_resources = ARRAY_SIZE(uart2_resources), -}; - -static inline void configure_usart2_pins(unsigned pins) -{ - at91_set_A_periph(AT91_PIN_PC15, 1); /* TXD2 */ - at91_set_A_periph(AT91_PIN_PC14, 0); /* RXD2 */ - - if (pins & ATMEL_UART_RTS) - at91_set_A_periph(AT91_PIN_PC17, 0); /* RTS2 */ - if (pins & ATMEL_UART_CTS) - at91_set_A_periph(AT91_PIN_PC16, 0); /* CTS2 */ -} - -static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */ -struct platform_device *atmel_default_console_device; /* the serial console device */ - -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) -{ - struct platform_device *pdev; - - switch (id) { - case 0: /* DBGU */ - pdev = &at572d940hf_dbgu_device; - configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); - break; - case AT572D940HF_ID_US0: - pdev = &at572d940hf_uart0_device; - configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); - break; - case AT572D940HF_ID_US1: - pdev = &at572d940hf_uart1_device; - configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); - break; - case AT572D940HF_ID_US2: - pdev = &at572d940hf_uart2_device; - configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); - break; - default: - return; - } - pdev->id = portnr; /* update to mapped ID */ - - if (portnr < ATMEL_MAX_UART) - at91_uarts[portnr] = pdev; -} - -void __init at91_set_serial_console(unsigned portnr) -{ - if (portnr < ATMEL_MAX_UART) - atmel_default_console_device = at91_uarts[portnr]; -} - -void __init at91_add_device_serial(void) -{ - int i; - - for (i = 0; i < ATMEL_MAX_UART; i++) { - if (at91_uarts[i]) - platform_device_register(at91_uarts[i]); - } - - if (!atmel_default_console_device) - printk(KERN_INFO "AT91: No default serial console defined.\n"); -} - -#else -void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} -void __init at91_set_serial_console(unsigned portnr) {} -void __init at91_add_device_serial(void) {} -#endif - - -/* -------------------------------------------------------------------- - * mAgic - * -------------------------------------------------------------------- */ - -#ifdef CONFIG_MAGICV -static struct resource mAgic_resources[] = { - { - .start = AT91_MAGIC_PM_BASE, - .end = AT91_MAGIC_PM_BASE + AT91_MAGIC_PM_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = AT91_MAGIC_DM_I_BASE, - .end = AT91_MAGIC_DM_I_BASE + AT91_MAGIC_DM_I_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = AT91_MAGIC_DM_F_BASE, - .end = AT91_MAGIC_DM_F_BASE + AT91_MAGIC_DM_F_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = AT91_MAGIC_DM_DB_BASE, - .end = AT91_MAGIC_DM_DB_BASE + AT91_MAGIC_DM_DB_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = AT91_MAGIC_REGS_BASE, - .end = AT91_MAGIC_REGS_BASE + AT91_MAGIC_REGS_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = AT91_MAGIC_EXTPAGE_BASE, - .end = AT91_MAGIC_EXTPAGE_BASE + AT91_MAGIC_EXTPAGE_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - { - .start = AT572D940HF_ID_MSIRQ0, - .end = AT572D940HF_ID_MSIRQ0, - .flags = IORESOURCE_IRQ, - }, - { - .start = AT572D940HF_ID_MHALT, - .end = AT572D940HF_ID_MHALT, - .flags = IORESOURCE_IRQ, - }, - { - .start = AT572D940HF_ID_MEXC, - .end = AT572D940HF_ID_MEXC, - .flags = IORESOURCE_IRQ, - }, - { - .start = AT572D940HF_ID_MEDMA, - .end = AT572D940HF_ID_MEDMA, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device mAgic_device = { - .name = "mAgic", - .id = -1, - .num_resources = ARRAY_SIZE(mAgic_resources), - .resource = mAgic_resources, -}; - -void __init at91_add_device_mAgic(void) -{ - platform_device_register(&mAgic_device); -} -#else -void __init at91_add_device_mAgic(void) {} -#endif - - -/* -------------------------------------------------------------------- */ - -/* - * These devices are always present and don't need any board-specific - * setup. - */ -static int __init at91_add_standard_devices(void) -{ - at91_add_device_rtt(); - at91_add_device_watchdog(); - at91_add_device_tc(); - return 0; -} - -arch_initcall(at91_add_standard_devices); diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c index 7337617..17fae4a 100644 --- a/arch/arm/mach-at91/at91cap9.c +++ b/arch/arm/mach-at91/at91cap9.c @@ -222,6 +222,25 @@ static struct clk *periph_clocks[] __initdata = { // irq0 .. irq1 }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), + CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), +}; + /* * The four programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -258,12 +277,29 @@ static void __init at91cap9_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); clk_register(&pck2); clk_register(&pck3); } +static struct clk_lookup console_clock_lookup; + +void __init at91cap9_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ @@ -303,11 +339,14 @@ static void at91cap9_poweroff(void) * AT91CAP9 processor initialization * -------------------------------------------------------------------- */ -void __init at91cap9_initialize(unsigned long main_clock) +void __init at91cap9_map_io(void) { /* Map peripherals */ iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc)); +} +void __init at91cap9_initialize(unsigned long main_clock) +{ at91_arch_reset = at91cap9_reset; pm_power_off = at91cap9_poweroff; at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1); diff --git a/arch/arm/mach-at91/at91cap9_devices.c b/arch/arm/mach-at91/at91cap9_devices.c index 21020ce..cd850ed 100644 --- a/arch/arm/mach-at91/at91cap9_devices.c +++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -181,10 +181,6 @@ void __init at91_add_device_usba(struct usba_platform_data *data) /* Pullup pin is handled internally by USB device peripheral */ - /* Clocks */ - at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk"); - at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk"); - platform_device_register(&at91_usba_udc_device); } #else @@ -355,7 +351,6 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) } mmc0_data = *data; - at91_clock_associate("mci0_clk", &at91cap9_mmc0_device.dev, "mci_clk"); platform_device_register(&at91cap9_mmc0_device); } else { /* MCI1 */ /* CLK */ @@ -373,7 +368,6 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) } mmc1_data = *data; - at91_clock_associate("mci1_clk", &at91cap9_mmc1_device.dev, "mci_clk"); platform_device_register(&at91cap9_mmc1_device); } } @@ -614,7 +608,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - at91_clock_associate("spi0_clk", &at91cap9_spi0_device.dev, "spi_clk"); platform_device_register(&at91cap9_spi0_device); } if (enable_spi1) { @@ -622,7 +615,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */ at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */ - at91_clock_associate("spi1_clk", &at91cap9_spi1_device.dev, "spi_clk"); platform_device_register(&at91cap9_spi1_device); } } @@ -659,8 +651,6 @@ static struct platform_device at91cap9_tcb_device = { static void __init at91_add_device_tc(void) { - /* this chip has one clock and irq for all three TC channels */ - at91_clock_associate("tcb_clk", &at91cap9_tcb_device.dev, "t0_clk"); platform_device_register(&at91cap9_tcb_device); } #else @@ -1001,12 +991,10 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91CAP9_ID_SSC0: pdev = &at91cap9_ssc0_device; configure_ssc0_pins(pins); - at91_clock_associate("ssc0_clk", &pdev->dev, "ssc"); break; case AT91CAP9_ID_SSC1: pdev = &at91cap9_ssc1_device; configure_ssc1_pins(pins); - at91_clock_associate("ssc1_clk", &pdev->dev, "ssc"); break; default: return; @@ -1199,32 +1187,30 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ pdev = &at91cap9_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91CAP9_ID_US0: pdev = &at91cap9_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91CAP9_ID_US1: pdev = &at91cap9_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91CAP9_ID_US2: pdev = &at91cap9_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; @@ -1232,8 +1218,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91cap9_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 2e9ecad..b228ce9 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -18,6 +18,7 @@ #include <mach/at91rm9200.h> #include <mach/at91_pmc.h> #include <mach/at91_st.h> +#include <mach/cpu.h> #include "generic.h" #include "clock.h" @@ -191,6 +192,26 @@ static struct clk *periph_clocks[] __initdata = { // irq0 .. irq6 }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk), + CLKDEV_CON_DEV_ID("ssc", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("ssc", "ssc.1", &ssc1_clk), + CLKDEV_CON_DEV_ID("ssc", "ssc.2", &ssc2_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk), +}; + /* * The four programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -227,12 +248,29 @@ static void __init at91rm9200_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); clk_register(&pck2); clk_register(&pck3); } +static struct clk_lookup console_clock_lookup; + +void __init at91rm9200_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ @@ -266,15 +304,25 @@ static void at91rm9200_reset(void) at91_sys_write(AT91_ST_CR, AT91_ST_WDRST); } +int rm9200_type; +EXPORT_SYMBOL(rm9200_type); + +void __init at91rm9200_set_type(int type) +{ + rm9200_type = type; +} /* -------------------------------------------------------------------- * AT91RM9200 processor initialization * -------------------------------------------------------------------- */ -void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks) +void __init at91rm9200_map_io(void) { /* Map peripherals */ iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc)); +} +void __init at91rm9200_initialize(unsigned long main_clock) +{ at91_arch_reset = at91rm9200_reset; at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1) | (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3) @@ -288,7 +336,8 @@ void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks at91rm9200_register_clocks(); /* Initialize GPIO subsystem */ - at91_gpio_init(at91rm9200_gpio, banks); + at91_gpio_init(at91rm9200_gpio, + cpu_is_at91rm9200_bga() ? AT91RM9200_BGA : AT91RM9200_PQFP); } diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 7b53922..a0ba475 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -644,15 +644,7 @@ static struct platform_device at91rm9200_tcb1_device = { static void __init at91_add_device_tc(void) { - /* this chip has a separate clock and irq for each TC channel */ - at91_clock_associate("tc0_clk", &at91rm9200_tcb0_device.dev, "t0_clk"); - at91_clock_associate("tc1_clk", &at91rm9200_tcb0_device.dev, "t1_clk"); - at91_clock_associate("tc2_clk", &at91rm9200_tcb0_device.dev, "t2_clk"); platform_device_register(&at91rm9200_tcb0_device); - - at91_clock_associate("tc3_clk", &at91rm9200_tcb1_device.dev, "t0_clk"); - at91_clock_associate("tc4_clk", &at91rm9200_tcb1_device.dev, "t1_clk"); - at91_clock_associate("tc5_clk", &at91rm9200_tcb1_device.dev, "t2_clk"); platform_device_register(&at91rm9200_tcb1_device); } #else @@ -849,17 +841,14 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91RM9200_ID_SSC0: pdev = &at91rm9200_ssc0_device; configure_ssc0_pins(pins); - at91_clock_associate("ssc0_clk", &pdev->dev, "ssc"); break; case AT91RM9200_ID_SSC1: pdev = &at91rm9200_ssc1_device; configure_ssc1_pins(pins); - at91_clock_associate("ssc1_clk", &pdev->dev, "ssc"); break; case AT91RM9200_ID_SSC2: pdev = &at91rm9200_ssc2_device; configure_ssc2_pins(pins); - at91_clock_associate("ssc2_clk", &pdev->dev, "ssc"); break; default: return; @@ -1109,37 +1098,34 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ pdev = &at91rm9200_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91RM9200_ID_US0: pdev = &at91rm9200_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91RM9200_ID_US1: pdev = &at91rm9200_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91RM9200_ID_US2: pdev = &at91rm9200_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; case AT91RM9200_ID_US3: pdev = &at91rm9200_uart3_device; configure_usart3_pins(pins); - at91_clock_associate("usart3_clk", &pdev->dev, "usart"); break; default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; @@ -1147,8 +1133,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91rm9200_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 195208b..7d606b0 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -231,6 +231,28 @@ static struct clk *periph_clocks[] __initdata = { // irq0 .. irq2 }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), + CLKDEV_CON_DEV_ID("t3_clk", "atmel_tcb.1", &tc3_clk), + CLKDEV_CON_DEV_ID("t4_clk", "atmel_tcb.1", &tc4_clk), + CLKDEV_CON_DEV_ID("t5_clk", "atmel_tcb.1", &tc5_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.5", &usart4_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.6", &usart5_clk), +}; + /* * The two programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -255,10 +277,27 @@ static void __init at91sam9260_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); } +static struct clk_lookup console_clock_lookup; + +void __init at91sam9260_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ @@ -289,7 +328,7 @@ static void at91sam9260_poweroff(void) * AT91SAM9260 processor initialization * -------------------------------------------------------------------- */ -static void __init at91sam9xe_initialize(void) +static void __init at91sam9xe_map_io(void) { unsigned long cidr, sram_size; @@ -310,18 +349,21 @@ static void __init at91sam9xe_initialize(void) iotable_init(at91sam9xe_sram_desc, ARRAY_SIZE(at91sam9xe_sram_desc)); } -void __init at91sam9260_initialize(unsigned long main_clock) +void __init at91sam9260_map_io(void) { /* Map peripherals */ iotable_init(at91sam9260_io_desc, ARRAY_SIZE(at91sam9260_io_desc)); if (cpu_is_at91sam9xe()) - at91sam9xe_initialize(); + at91sam9xe_map_io(); else if (cpu_is_at91sam9g20()) iotable_init(at91sam9g20_sram_desc, ARRAY_SIZE(at91sam9g20_sram_desc)); else iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc)); +} +void __init at91sam9260_initialize(unsigned long main_clock) +{ at91_arch_reset = at91sam9_alt_reset; pm_power_off = at91sam9260_poweroff; at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1) diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 07eb7b0..1fdeb90 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -609,7 +609,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI1_SPCK */ - at91_clock_associate("spi0_clk", &at91sam9260_spi0_device.dev, "spi_clk"); platform_device_register(&at91sam9260_spi0_device); } if (enable_spi1) { @@ -617,7 +616,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI1_MOSI */ at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI1_SPCK */ - at91_clock_associate("spi1_clk", &at91sam9260_spi1_device.dev, "spi_clk"); platform_device_register(&at91sam9260_spi1_device); } } @@ -694,15 +692,7 @@ static struct platform_device at91sam9260_tcb1_device = { static void __init at91_add_device_tc(void) { - /* this chip has a separate clock and irq for each TC channel */ - at91_clock_associate("tc0_clk", &at91sam9260_tcb0_device.dev, "t0_clk"); - at91_clock_associate("tc1_clk", &at91sam9260_tcb0_device.dev, "t1_clk"); - at91_clock_associate("tc2_clk", &at91sam9260_tcb0_device.dev, "t2_clk"); platform_device_register(&at91sam9260_tcb0_device); - - at91_clock_associate("tc3_clk", &at91sam9260_tcb1_device.dev, "t0_clk"); - at91_clock_associate("tc4_clk", &at91sam9260_tcb1_device.dev, "t1_clk"); - at91_clock_associate("tc5_clk", &at91sam9260_tcb1_device.dev, "t2_clk"); platform_device_register(&at91sam9260_tcb1_device); } #else @@ -820,7 +810,6 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91SAM9260_ID_SSC: pdev = &at91sam9260_ssc_device; configure_ssc_pins(pins); - at91_clock_associate("ssc_clk", &pdev->dev, "pclk"); break; default: return; @@ -1139,47 +1128,42 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ pdev = &at91sam9260_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91SAM9260_ID_US0: pdev = &at91sam9260_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91SAM9260_ID_US1: pdev = &at91sam9260_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91SAM9260_ID_US2: pdev = &at91sam9260_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; case AT91SAM9260_ID_US3: pdev = &at91sam9260_uart3_device; configure_usart3_pins(pins); - at91_clock_associate("usart3_clk", &pdev->dev, "usart"); break; case AT91SAM9260_ID_US4: pdev = &at91sam9260_uart4_device; configure_usart4_pins(); - at91_clock_associate("usart4_clk", &pdev->dev, "usart"); break; case AT91SAM9260_ID_US5: pdev = &at91sam9260_uart5_device; configure_usart5_pins(); - at91_clock_associate("usart5_clk", &pdev->dev, "usart"); break; default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; @@ -1187,8 +1171,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91sam9260_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index fcad886..c148316 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -178,6 +178,24 @@ static struct clk *periph_clocks[] __initdata = { // irq0 .. irq2 }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), +}; + /* * The four programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -228,6 +246,11 @@ static void __init at91sam9261_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); clk_register(&pck2); @@ -237,6 +260,18 @@ static void __init at91sam9261_register_clocks(void) clk_register(&hck1); } +static struct clk_lookup console_clock_lookup; + +void __init at91sam9261_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ @@ -267,7 +302,7 @@ static void at91sam9261_poweroff(void) * AT91SAM9261 processor initialization * -------------------------------------------------------------------- */ -void __init at91sam9261_initialize(unsigned long main_clock) +void __init at91sam9261_map_io(void) { /* Map peripherals */ iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc)); @@ -276,8 +311,10 @@ void __init at91sam9261_initialize(unsigned long main_clock) iotable_init(at91sam9g10_sram_desc, ARRAY_SIZE(at91sam9g10_sram_desc)); else iotable_init(at91sam9261_sram_desc, ARRAY_SIZE(at91sam9261_sram_desc)); +} - +void __init at91sam9261_initialize(unsigned long main_clock) +{ at91_arch_reset = at91sam9_alt_reset; pm_power_off = at91sam9261_poweroff; at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1) diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 59fc483..3eb4538 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -426,7 +426,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - at91_clock_associate("spi0_clk", &at91sam9261_spi0_device.dev, "spi_clk"); platform_device_register(&at91sam9261_spi0_device); } if (enable_spi1) { @@ -434,7 +433,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PB31, 0); /* SPI1_MOSI */ at91_set_A_periph(AT91_PIN_PB29, 0); /* SPI1_SPCK */ - at91_clock_associate("spi1_clk", &at91sam9261_spi1_device.dev, "spi_clk"); platform_device_register(&at91sam9261_spi1_device); } } @@ -581,10 +579,6 @@ static struct platform_device at91sam9261_tcb_device = { static void __init at91_add_device_tc(void) { - /* this chip has a separate clock and irq for each TC channel */ - at91_clock_associate("tc0_clk", &at91sam9261_tcb_device.dev, "t0_clk"); - at91_clock_associate("tc1_clk", &at91sam9261_tcb_device.dev, "t1_clk"); - at91_clock_associate("tc2_clk", &at91sam9261_tcb_device.dev, "t2_clk"); platform_device_register(&at91sam9261_tcb_device); } #else @@ -786,17 +780,14 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91SAM9261_ID_SSC0: pdev = &at91sam9261_ssc0_device; configure_ssc0_pins(pins); - at91_clock_associate("ssc0_clk", &pdev->dev, "pclk"); break; case AT91SAM9261_ID_SSC1: pdev = &at91sam9261_ssc1_device; configure_ssc1_pins(pins); - at91_clock_associate("ssc1_clk", &pdev->dev, "pclk"); break; case AT91SAM9261_ID_SSC2: pdev = &at91sam9261_ssc2_device; configure_ssc2_pins(pins); - at91_clock_associate("ssc2_clk", &pdev->dev, "pclk"); break; default: return; @@ -989,32 +980,30 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ pdev = &at91sam9261_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91SAM9261_ID_US0: pdev = &at91sam9261_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91SAM9261_ID_US1: pdev = &at91sam9261_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91SAM9261_ID_US2: pdev = &at91sam9261_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; @@ -1022,8 +1011,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91sam9261_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 249f900..dc28477 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -199,6 +199,23 @@ static struct clk *periph_clocks[] __initdata = { // irq0 .. irq1 }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), +}; + /* * The four programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -235,12 +252,29 @@ static void __init at91sam9263_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); clk_register(&pck2); clk_register(&pck3); } +static struct clk_lookup console_clock_lookup; + +void __init at91sam9263_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ @@ -279,11 +313,14 @@ static void at91sam9263_poweroff(void) * AT91SAM9263 processor initialization * -------------------------------------------------------------------- */ -void __init at91sam9263_initialize(unsigned long main_clock) +void __init at91sam9263_map_io(void) { /* Map peripherals */ iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc)); +} +void __init at91sam9263_initialize(unsigned long main_clock) +{ at91_arch_reset = at91sam9_alt_reset; pm_power_off = at91sam9263_poweroff; at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1); diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index fb5c23a..ffe081b 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -308,7 +308,6 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) } mmc0_data = *data; - at91_clock_associate("mci0_clk", &at91sam9263_mmc0_device.dev, "mci_clk"); platform_device_register(&at91sam9263_mmc0_device); } else { /* MCI1 */ /* CLK */ @@ -339,7 +338,6 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) } mmc1_data = *data; - at91_clock_associate("mci1_clk", &at91sam9263_mmc1_device.dev, "mci_clk"); platform_device_register(&at91sam9263_mmc1_device); } } @@ -686,7 +684,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */ at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */ - at91_clock_associate("spi0_clk", &at91sam9263_spi0_device.dev, "spi_clk"); platform_device_register(&at91sam9263_spi0_device); } if (enable_spi1) { @@ -694,7 +691,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */ at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */ - at91_clock_associate("spi1_clk", &at91sam9263_spi1_device.dev, "spi_clk"); platform_device_register(&at91sam9263_spi1_device); } } @@ -941,8 +937,6 @@ static struct platform_device at91sam9263_tcb_device = { static void __init at91_add_device_tc(void) { - /* this chip has one clock and irq for all three TC channels */ - at91_clock_associate("tcb_clk", &at91sam9263_tcb_device.dev, "t0_clk"); platform_device_register(&at91sam9263_tcb_device); } #else @@ -1171,12 +1165,10 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91SAM9263_ID_SSC0: pdev = &at91sam9263_ssc0_device; configure_ssc0_pins(pins); - at91_clock_associate("ssc0_clk", &pdev->dev, "pclk"); break; case AT91SAM9263_ID_SSC1: pdev = &at91sam9263_ssc1_device; configure_ssc1_pins(pins); - at91_clock_associate("ssc1_clk", &pdev->dev, "pclk"); break; default: return; @@ -1370,32 +1362,30 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ pdev = &at91sam9263_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91SAM9263_ID_US0: pdev = &at91sam9263_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91SAM9263_ID_US1: pdev = &at91sam9263_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91SAM9263_ID_US2: pdev = &at91sam9263_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; @@ -1403,8 +1393,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91sam9263_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index c67b47f..2bb6ff9 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -184,22 +184,6 @@ static struct clk vdec_clk = { .type = CLK_TYPE_PERIPHERAL, }; -/* One additional fake clock for ohci */ -static struct clk ohci_clk = { - .name = "ohci_clk", - .pmc_mask = 0, - .type = CLK_TYPE_PERIPHERAL, - .parent = &uhphs_clk, -}; - -/* One additional fake clock for second TC block */ -static struct clk tcb1_clk = { - .name = "tcb1_clk", - .pmc_mask = 0, - .type = CLK_TYPE_PERIPHERAL, - .parent = &tcb0_clk, -}; - static struct clk *periph_clocks[] __initdata = { &pioA_clk, &pioB_clk, @@ -228,8 +212,30 @@ static struct clk *periph_clocks[] __initdata = { &udphs_clk, &mmc1_clk, // irq0 - &ohci_clk, - &tcb1_clk, +}; + +static struct clk_lookup periph_clocks_lookups[] = { + /* One additional fake clock for ohci */ + CLKDEV_CON_ID("ohci_clk", &uhphs_clk), + CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci.0", &uhphs_clk), + CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), + CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb0_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tcb0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk), }; /* @@ -256,6 +262,11 @@ static void __init at91sam9g45_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + if (cpu_is_at91sam9m10() || cpu_is_at91sam9m11()) clk_register(&vdec_clk); @@ -263,6 +274,18 @@ static void __init at91sam9g45_register_clocks(void) clk_register(&pck1); } +static struct clk_lookup console_clock_lookup; + +void __init at91sam9g45_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ @@ -306,11 +329,14 @@ static void at91sam9g45_poweroff(void) * AT91SAM9G45 processor initialization * -------------------------------------------------------------------- */ -void __init at91sam9g45_initialize(unsigned long main_clock) +void __init at91sam9g45_map_io(void) { /* Map peripherals */ iotable_init(at91sam9g45_io_desc, ARRAY_SIZE(at91sam9g45_io_desc)); +} +void __init at91sam9g45_initialize(unsigned long main_clock) +{ at91_arch_reset = at91sam9g45_reset; pm_power_off = at91sam9g45_poweroff; at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0); diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 5e9f8a4..0567486 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -180,7 +180,6 @@ void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) } usbh_ehci_data = *data; - at91_clock_associate("uhphs_clk", &at91_usbh_ehci_device.dev, "ehci_clk"); platform_device_register(&at91_usbh_ehci_device); } #else @@ -266,10 +265,6 @@ void __init at91_add_device_usba(struct usba_platform_data *data) /* Pullup pin is handled internally by USB device peripheral */ - /* Clocks */ - at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk"); - at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk"); - platform_device_register(&at91_usba_udc_device); } #else @@ -478,7 +473,6 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) } mmc0_data = *data; - at91_clock_associate("mci0_clk", &at91sam9g45_mmc0_device.dev, "mci_clk"); platform_device_register(&at91sam9g45_mmc0_device); } else { /* MCI1 */ @@ -504,7 +498,6 @@ void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) } mmc1_data = *data; - at91_clock_associate("mci1_clk", &at91sam9g45_mmc1_device.dev, "mci_clk"); platform_device_register(&at91sam9g45_mmc1_device); } @@ -801,7 +794,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI0_MOSI */ at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI0_SPCK */ - at91_clock_associate("spi0_clk", &at91sam9g45_spi0_device.dev, "spi_clk"); platform_device_register(&at91sam9g45_spi0_device); } if (enable_spi1) { @@ -809,7 +801,6 @@ void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) at91_set_A_periph(AT91_PIN_PB15, 0); /* SPI1_MOSI */ at91_set_A_periph(AT91_PIN_PB16, 0); /* SPI1_SPCK */ - at91_clock_associate("spi1_clk", &at91sam9g45_spi1_device.dev, "spi_clk"); platform_device_register(&at91sam9g45_spi1_device); } } @@ -999,10 +990,7 @@ static struct platform_device at91sam9g45_tcb1_device = { static void __init at91_add_device_tc(void) { - /* this chip has one clock and irq for all six TC channels */ - at91_clock_associate("tcb0_clk", &at91sam9g45_tcb0_device.dev, "t0_clk"); platform_device_register(&at91sam9g45_tcb0_device); - at91_clock_associate("tcb1_clk", &at91sam9g45_tcb1_device.dev, "t0_clk"); platform_device_register(&at91sam9g45_tcb1_device); } #else @@ -1286,12 +1274,10 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91SAM9G45_ID_SSC0: pdev = &at91sam9g45_ssc0_device; configure_ssc0_pins(pins); - at91_clock_associate("ssc0_clk", &pdev->dev, "pclk"); break; case AT91SAM9G45_ID_SSC1: pdev = &at91sam9g45_ssc1_device; configure_ssc1_pins(pins); - at91_clock_associate("ssc1_clk", &pdev->dev, "pclk"); break; default: return; @@ -1527,37 +1513,34 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ pdev = &at91sam9g45_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91SAM9G45_ID_US0: pdev = &at91sam9g45_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91SAM9G45_ID_US1: pdev = &at91sam9g45_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91SAM9G45_ID_US2: pdev = &at91sam9g45_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; case AT91SAM9G45_ID_US3: pdev = &at91sam9g45_uart3_device; configure_usart3_pins(pins); - at91_clock_associate("usart3_clk", &pdev->dev, "usart"); break; default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; @@ -1565,8 +1548,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91sam9g45_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 6a9d24e..1a40f16 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -190,6 +190,24 @@ static struct clk *periph_clocks[] __initdata = { // irq0 }; +static struct clk_lookup periph_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc.0", &utmi_clk), + CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc.0", &udphs_clk), + CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), + CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), + CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), +}; + +static struct clk_lookup usart_clocks_lookups[] = { + CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk), + CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk), +}; + /* * The two programmable clocks. * You must configure pin multiplexing to bring these signals out. @@ -214,10 +232,27 @@ static void __init at91sam9rl_register_clocks(void) for (i = 0; i < ARRAY_SIZE(periph_clocks); i++) clk_register(periph_clocks[i]); + clkdev_add_table(periph_clocks_lookups, + ARRAY_SIZE(periph_clocks_lookups)); + clkdev_add_table(usart_clocks_lookups, + ARRAY_SIZE(usart_clocks_lookups)); + clk_register(&pck0); clk_register(&pck1); } +static struct clk_lookup console_clock_lookup; + +void __init at91sam9rl_set_console_clock(int id) +{ + if (id >= ARRAY_SIZE(usart_clocks_lookups)) + return; + + console_clock_lookup.con_id = "usart"; + console_clock_lookup.clk = usart_clocks_lookups[id].clk; + clkdev_add(&console_clock_lookup); +} + /* -------------------------------------------------------------------- * GPIO * -------------------------------------------------------------------- */ @@ -252,7 +287,7 @@ static void at91sam9rl_poweroff(void) * AT91SAM9RL processor initialization * -------------------------------------------------------------------- */ -void __init at91sam9rl_initialize(unsigned long main_clock) +void __init at91sam9rl_map_io(void) { unsigned long cidr, sram_size; @@ -275,7 +310,10 @@ void __init at91sam9rl_initialize(unsigned long main_clock) /* Map SRAM */ iotable_init(at91sam9rl_sram_desc, ARRAY_SIZE(at91sam9rl_sram_desc)); +} +void __init at91sam9rl_initialize(unsigned long main_clock) +{ at91_arch_reset = at91sam9_alt_reset; pm_power_off = at91sam9rl_poweroff; at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0); diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index c49262b..c296045 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -155,10 +155,6 @@ void __init at91_add_device_usba(struct usba_platform_data *data) /* Pullup pin is handled internally by USB device peripheral */ - /* Clocks */ - at91_clock_associate("utmi_clk", &at91_usba_udc_device.dev, "hclk"); - at91_clock_associate("udphs_clk", &at91_usba_udc_device.dev, "pclk"); - platform_device_register(&at91_usba_udc_device); } #else @@ -605,10 +601,6 @@ static struct platform_device at91sam9rl_tcb_device = { static void __init at91_add_device_tc(void) { - /* this chip has a separate clock and irq for each TC channel */ - at91_clock_associate("tc0_clk", &at91sam9rl_tcb_device.dev, "t0_clk"); - at91_clock_associate("tc1_clk", &at91sam9rl_tcb_device.dev, "t1_clk"); - at91_clock_associate("tc2_clk", &at91sam9rl_tcb_device.dev, "t2_clk"); platform_device_register(&at91sam9rl_tcb_device); } #else @@ -892,12 +884,10 @@ void __init at91_add_device_ssc(unsigned id, unsigned pins) case AT91SAM9RL_ID_SSC0: pdev = &at91sam9rl_ssc0_device; configure_ssc0_pins(pins); - at91_clock_associate("ssc0_clk", &pdev->dev, "pclk"); break; case AT91SAM9RL_ID_SSC1: pdev = &at91sam9rl_ssc1_device; configure_ssc1_pins(pins); - at91_clock_associate("ssc1_clk", &pdev->dev, "pclk"); break; default: return; @@ -1141,37 +1131,34 @@ struct platform_device *atmel_default_console_device; /* the serial console devi void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (id) { case 0: /* DBGU */ pdev = &at91sam9rl_dbgu_device; configure_dbgu_pins(); - at91_clock_associate("mck", &pdev->dev, "usart"); break; case AT91SAM9RL_ID_US0: pdev = &at91sam9rl_uart0_device; configure_usart0_pins(pins); - at91_clock_associate("usart0_clk", &pdev->dev, "usart"); break; case AT91SAM9RL_ID_US1: pdev = &at91sam9rl_uart1_device; configure_usart1_pins(pins); - at91_clock_associate("usart1_clk", &pdev->dev, "usart"); break; case AT91SAM9RL_ID_US2: pdev = &at91sam9rl_uart2_device; configure_usart2_pins(pins); - at91_clock_associate("usart2_clk", &pdev->dev, "usart"); break; case AT91SAM9RL_ID_US3: pdev = &at91sam9rl_uart3_device; configure_usart3_pins(pins); - at91_clock_associate("usart3_clk", &pdev->dev, "usart"); break; default: return; } - pdev->id = portnr; /* update to mapped ID */ + pdata = pdev->dev.platform_data; + pdata->num = portnr; /* update to mapped ID */ if (portnr < ATMEL_MAX_UART) at91_uarts[portnr] = pdev; @@ -1179,8 +1166,10 @@ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) void __init at91_set_serial_console(unsigned portnr) { - if (portnr < ATMEL_MAX_UART) + if (portnr < ATMEL_MAX_UART) { atmel_default_console_device = at91_uarts[portnr]; + at91sam9rl_set_console_clock(portnr); + } } void __init at91_add_device_serial(void) diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c index ad3ec85..56ba3bd 100644 --- a/arch/arm/mach-at91/at91x40.c +++ b/arch/arm/mach-at91/at91x40.c @@ -37,11 +37,6 @@ unsigned long clk_get_rate(struct clk *clk) return AT91X40_MASTER_CLOCK; } -struct clk *clk_get(struct device *dev, const char *id) -{ - return NULL; -} - void __init at91x40_initialize(unsigned long main_clock) { at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1) diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 8a3fc84..ab1d463 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -35,14 +35,18 @@ #include <mach/board.h> #include <mach/gpio.h> +#include <mach/cpu.h> #include "generic.h" -static void __init onearm_map_io(void) +static void __init onearm_init_early(void) { + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_PQFP); + at91rm9200_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -92,9 +96,9 @@ static void __init onearm_board_init(void) MACHINE_START(ONEARM, "Ajeco 1ARM single board computer") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = onearm_map_io, + .map_io = at91rm9200_map_io, + .init_early = onearm_init_early, .init_irq = onearm_init_irq, .init_machine = onearm_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index cba7f77..a4924de 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -48,7 +48,7 @@ #include "generic.h" -static void __init afeb9260_map_io(void) +static void __init afeb9260_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -218,9 +218,9 @@ static void __init afeb9260_board_init(void) MACHINE_START(AFEB9260, "Custom afeb9260 board") /* Maintainer: Sergey Lapin <slapin@ossfans.org> */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = afeb9260_map_io, + .map_io = at91sam9260_map_io, + .init_early = afeb9260_init_early, .init_irq = afeb9260_init_irq, .init_machine = afeb9260_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-at572d940hf_ek.c b/arch/arm/mach-at91/board-at572d940hf_ek.c deleted file mode 100644 index 3929f1c..0000000 --- a/arch/arm/mach-at91/board-at572d940hf_ek.c +++ /dev/null @@ -1,326 +0,0 @@ -/* - * linux/arch/arm/mach-at91/board-at572d940hf_ek.c - * - * Copyright (C) 2008 Atmel Antonio R. Costa <costa.antonior@gmail.com> - * Copyright (C) 2005 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/types.h> -#include <linux/init.h> -#include <linux/mm.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spi/spi.h> -#include <linux/spi/ds1305.h> -#include <linux/irq.h> -#include <linux/mtd/physmap.h> - -#include <mach/hardware.h> -#include <asm/setup.h> -#include <asm/mach-types.h> -#include <asm/irq.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <mach/board.h> -#include <mach/gpio.h> -#include <mach/at91sam9_smc.h> - -#include "sam9_smc.h" -#include "generic.h" - - -static void __init eb_map_io(void) -{ - /* Initialize processor: 12.500 MHz crystal */ - at572d940hf_initialize(12000000); - - /* DBGU on ttyS0. (Rx & Tx only) */ - at91_register_uart(0, 0, 0); - - /* USART0 on ttyS1. (Rx & Tx only) */ - at91_register_uart(AT572D940HF_ID_US0, 1, 0); - - /* USART1 on ttyS2. (Rx & Tx only) */ - at91_register_uart(AT572D940HF_ID_US1, 2, 0); - - /* USART2 on ttyS3. (Tx & Rx only */ - at91_register_uart(AT572D940HF_ID_US2, 3, 0); - - /* set serial console to ttyS0 (ie, DBGU) */ - at91_set_serial_console(0); -} - -static void __init eb_init_irq(void) -{ - at572d940hf_init_interrupts(NULL); -} - - -/* - * USB Host Port - */ -static struct at91_usbh_data __initdata eb_usbh_data = { - .ports = 2, -}; - - -/* - * USB Device Port - */ -static struct at91_udc_data __initdata eb_udc_data = { - .vbus_pin = 0, /* no VBUS detection,UDC always on */ - .pullup_pin = 0, /* pull-up driven by UDC */ -}; - - -/* - * MCI (SD/MMC) - */ -static struct at91_mmc_data __initdata eb_mmc_data = { - .wire4 = 1, -/* .det_pin = ... not connected */ -/* .wp_pin = ... not connected */ -/* .vcc_pin = ... not connected */ -}; - - -/* - * MACB Ethernet device - */ -static struct at91_eth_data __initdata eb_eth_data = { - .phy_irq_pin = AT91_PIN_PB25, - .is_rmii = 1, -}; - -/* - * NOR flash - */ - -static struct mtd_partition eb_nor_partitions[] = { - { - .name = "Raw Environment", - .offset = 0, - .size = SZ_4M, - .mask_flags = 0, - }, - { - .name = "OS FS", - .offset = MTDPART_OFS_APPEND, - .size = 3 * SZ_1M, - .mask_flags = 0, - }, - { - .name = "APP FS", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - .mask_flags = 0, - }, -}; - -static void nor_flash_set_vpp(struct map_info* mi, int i) { -}; - -static struct physmap_flash_data nor_flash_data = { - .width = 4, - .parts = eb_nor_partitions, - .nr_parts = ARRAY_SIZE(eb_nor_partitions), - .set_vpp = nor_flash_set_vpp, -}; - -static struct resource nor_flash_resources[] = { - { - .start = AT91_CHIPSELECT_0, - .end = AT91_CHIPSELECT_0 + SZ_16M - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device nor_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &nor_flash_data, - }, - .resource = nor_flash_resources, - .num_resources = ARRAY_SIZE(nor_flash_resources), -}; - -static struct sam9_smc_config __initdata eb_nor_smc_config = { - .ncs_read_setup = 1, - .nrd_setup = 1, - .ncs_write_setup = 1, - .nwe_setup = 1, - - .ncs_read_pulse = 7, - .nrd_pulse = 7, - .ncs_write_pulse = 7, - .nwe_pulse = 7, - - .read_cycle = 9, - .write_cycle = 9, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_32, - .tdf_cycles = 1, -}; - -static void __init eb_add_device_nor(void) -{ - /* configure chip-select 0 (NOR) */ - sam9_smc_configure(0, &eb_nor_smc_config); - platform_device_register(&nor_flash); -} - -/* - * NAND flash - */ -static struct mtd_partition __initdata eb_nand_partition[] = { - { - .name = "Partition 1", - .offset = 0, - .size = SZ_16M, - }, - { - .name = "Partition 2", - .offset = MTDPART_OFS_NXTBLK, - .size = MTDPART_SIZ_FULL, - } -}; - -static struct mtd_partition * __init nand_partitions(int size, int *num_partitions) -{ - *num_partitions = ARRAY_SIZE(eb_nand_partition); - return eb_nand_partition; -} - -static struct atmel_nand_data __initdata eb_nand_data = { - .ale = 22, - .cle = 21, -/* .det_pin = ... not connected */ -/* .rdy_pin = AT91_PIN_PC16, */ - .enable_pin = AT91_PIN_PA15, - .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif -}; - -static struct sam9_smc_config __initdata eb_nand_smc_config = { - .ncs_read_setup = 0, - .nrd_setup = 0, - .ncs_write_setup = 1, - .nwe_setup = 1, - - .ncs_read_pulse = 3, - .nrd_pulse = 3, - .ncs_write_pulse = 3, - .nwe_pulse = 3, - - .read_cycle = 5, - .write_cycle = 5, - - .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE, - .tdf_cycles = 12, -}; - -static void __init eb_add_device_nand(void) -{ - /* setup bus-width (8 or 16) */ - if (eb_nand_data.bus_width_16) - eb_nand_smc_config.mode |= AT91_SMC_DBW_16; - else - eb_nand_smc_config.mode |= AT91_SMC_DBW_8; - - /* configure chip-select 3 (NAND) */ - sam9_smc_configure(3, &eb_nand_smc_config); - - at91_add_device_nand(&eb_nand_data); -} - - -/* - * SPI devices - */ -static struct resource rtc_resources[] = { - [0] = { - .start = AT572D940HF_ID_IRQ1, - .end = AT572D940HF_ID_IRQ1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct ds1305_platform_data ds1306_data = { - .is_ds1306 = true, - .en_1hz = false, -}; - -static struct spi_board_info eb_spi_devices[] = { - { /* RTC Dallas DS1306 */ - .modalias = "rtc-ds1305", - .chip_select = 3, - .mode = SPI_CS_HIGH | SPI_CPOL | SPI_CPHA, - .max_speed_hz = 500000, - .bus_num = 0, - .irq = AT572D940HF_ID_IRQ1, - .platform_data = (void *) &ds1306_data, - }, -#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) - { /* Dataflash card */ - .modalias = "mtd_dataflash", - .chip_select = 0, - .max_speed_hz = 15 * 1000 * 1000, - .bus_num = 0, - }, -#endif -}; - -static void __init eb_board_init(void) -{ - /* Serial */ - at91_add_device_serial(); - /* USB Host */ - at91_add_device_usbh(&eb_usbh_data); - /* USB Device */ - at91_add_device_udc(&eb_udc_data); - /* I2C */ - at91_add_device_i2c(NULL, 0); - /* NOR */ - eb_add_device_nor(); - /* NAND */ - eb_add_device_nand(); - /* SPI */ - at91_add_device_spi(eb_spi_devices, ARRAY_SIZE(eb_spi_devices)); - /* MMC */ - at91_add_device_mmc(0, &eb_mmc_data); - /* Ethernet */ - at91_add_device_eth(&eb_eth_data); - /* mAgic */ - at91_add_device_mAgic(); -} - -MACHINE_START(AT572D940HFEB, "Atmel AT91D940HF-EB") - /* Maintainer: Atmel <costa.antonior@gmail.com> */ - .boot_params = AT91_SDRAM_BASE + 0x100, - .timer = &at91sam926x_timer, - .map_io = eb_map_io, - .init_irq = eb_init_irq, - .init_machine = eb_board_init, -MACHINE_END diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index b54e3e6..148fccb 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -45,7 +45,7 @@ #include "generic.h" -static void __init cam60_map_io(void) +static void __init cam60_init_early(void) { /* Initialize processor: 10 MHz crystal */ at91sam9260_initialize(10000000); @@ -198,9 +198,9 @@ static void __init cam60_board_init(void) MACHINE_START(CAM60, "KwikByte CAM60") /* Maintainer: KwikByte */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = cam60_map_io, + .map_io = at91sam9260_map_io, + .init_early = cam60_init_early, .init_irq = cam60_init_irq, .init_machine = cam60_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index e727444..1904fdf 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -44,12 +44,13 @@ #include <mach/gpio.h> #include <mach/at91cap9_matrix.h> #include <mach/at91sam9_smc.h> +#include <mach/system_rev.h> #include "sam9_smc.h" #include "generic.h" -static void __init cap9adk_map_io(void) +static void __init cap9adk_init_early(void) { /* Initialize processor: 12 MHz crystal */ at91cap9_initialize(12000000); @@ -187,11 +188,6 @@ static struct atmel_nand_data __initdata cap9adk_nand_data = { // .rdy_pin = ... not connected .enable_pin = AT91_PIN_PD15, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata cap9adk_nand_smc_config = { @@ -219,6 +215,7 @@ static void __init cap9adk_add_device_nand(void) csa = at91_sys_read(AT91_MATRIX_EBICSA); at91_sys_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_VDDIOMSEL_3_3V); + cap9adk_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (cap9adk_nand_data.bus_width_16) cap9adk_nand_smc_config.mode |= AT91_SMC_DBW_16; @@ -399,9 +396,9 @@ static void __init cap9adk_board_init(void) MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK") /* Maintainer: Stelian Pop <stelian.pop@leadtechdesign.com> */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = cap9adk_map_io, + .map_io = at91cap9_map_io, + .init_early = cap9adk_init_early, .init_irq = cap9adk_init_irq, .init_machine = cap9adk_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index 295e1e7..f36b186 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -40,10 +40,10 @@ #include "generic.h" -static void __init carmeva_map_io(void) +static void __init carmeva_init_early(void) { /* Initialize processor: 20.000 MHz crystal */ - at91rm9200_initialize(20000000, AT91RM9200_BGA); + at91rm9200_initialize(20000000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -162,9 +162,9 @@ static void __init carmeva_board_init(void) MACHINE_START(CARMEVA, "Carmeva") /* Maintainer: Conitec Datasystems */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = carmeva_map_io, + .map_io = at91rm9200_map_io, + .init_early = carmeva_init_early, .init_irq = carmeva_init_irq, .init_machine = carmeva_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index 3838594..9805110 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -47,7 +47,7 @@ #include "sam9_smc.h" #include "generic.h" -static void __init cpu9krea_map_io(void) +static void __init cpu9krea_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -375,9 +375,9 @@ MACHINE_START(CPUAT9260, "Eukrea CPU9260") MACHINE_START(CPUAT9G20, "Eukrea CPU9G20") #endif /* Maintainer: Eric Benard - EUKREA Electromatique */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = cpu9krea_map_io, + .map_io = at91sam9260_map_io, + .init_early = cpu9krea_init_early, .init_irq = cpu9krea_init_irq, .init_machine = cpu9krea_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index 2f4dd8c..6daabe3 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -38,6 +38,7 @@ #include <mach/board.h> #include <mach/gpio.h> #include <mach/at91rm9200_mc.h> +#include <mach/cpu.h> #include "generic.h" @@ -50,10 +51,13 @@ static struct gpio_led cpuat91_leds[] = { }, }; -static void __init cpuat91_map_io(void) +static void __init cpuat91_init_early(void) { + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_PQFP); + at91rm9200_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -175,9 +179,9 @@ static void __init cpuat91_board_init(void) MACHINE_START(CPUAT91, "Eukrea") /* Maintainer: Eric Benard - EUKREA Electromatique */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = cpuat91_map_io, + .map_io = at91rm9200_map_io, + .init_early = cpuat91_init_early, .init_irq = cpuat91_init_irq, .init_machine = cpuat91_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index 464839d..d98bcec 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -43,10 +43,10 @@ #include "generic.h" -static void __init csb337_map_io(void) +static void __init csb337_init_early(void) { /* Initialize processor: 3.6864 MHz crystal */ - at91rm9200_initialize(3686400, AT91RM9200_BGA); + at91rm9200_initialize(3686400); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); @@ -257,9 +257,9 @@ static void __init csb337_board_init(void) MACHINE_START(CSB337, "Cogent CSB337") /* Maintainer: Bill Gatliff */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = csb337_map_io, + .map_io = at91rm9200_map_io, + .init_early = csb337_init_early, .init_irq = csb337_init_irq, .init_machine = csb337_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index 431688c..019aab4 100644 --- a/arch/arm/mach-at91/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -40,10 +40,10 @@ #include "generic.h" -static void __init csb637_map_io(void) +static void __init csb637_init_early(void) { /* Initialize processor: 3.6864 MHz crystal */ - at91rm9200_initialize(3686400, AT91RM9200_BGA); + at91rm9200_initialize(3686400); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -138,9 +138,9 @@ static void __init csb637_board_init(void) MACHINE_START(CSB637, "Cogent CSB637") /* Maintainer: Bill Gatliff */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = csb637_map_io, + .map_io = at91rm9200_map_io, + .init_early = csb637_init_early, .init_irq = csb637_init_irq, .init_machine = csb637_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-eb01.c b/arch/arm/mach-at91/board-eb01.c index d8df59a..d2023f2 100644 --- a/arch/arm/mach-at91/board-eb01.c +++ b/arch/arm/mach-at91/board-eb01.c @@ -35,7 +35,7 @@ static void __init at91eb01_init_irq(void) at91x40_init_interrupts(NULL); } -static void __init at91eb01_map_io(void) +static void __init at91eb01_init_early(void) { at91x40_initialize(40000000); } @@ -43,7 +43,7 @@ static void __init at91eb01_map_io(void) MACHINE_START(AT91EB01, "Atmel AT91 EB01") /* Maintainer: Greg Ungerer <gerg@snapgear.com> */ .timer = &at91x40_timer, + .init_early = at91eb01_init_early, .init_irq = at91eb01_init_irq, - .map_io = at91eb01_map_io, MACHINE_END diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index 6cf6566..e948453 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -40,10 +40,10 @@ #include "generic.h" -static void __init eb9200_map_io(void) +static void __init eb9200_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_BGA); + at91rm9200_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -120,9 +120,9 @@ static void __init eb9200_board_init(void) } MACHINE_START(ATEB9200, "Embest ATEB9200") - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = eb9200_map_io, + .map_io = at91rm9200_map_io, + .init_early = eb9200_init_early, .init_irq = eb9200_init_irq, .init_machine = eb9200_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index de2fd04..a6f57fa 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -38,14 +38,18 @@ #include <mach/board.h> #include <mach/gpio.h> +#include <mach/cpu.h> #include "generic.h" -static void __init ecb_at91map_io(void) +static void __init ecb_at91init_early(void) { + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_PQFP); + at91rm9200_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7); @@ -168,9 +172,9 @@ static void __init ecb_at91board_init(void) MACHINE_START(ECBAT91, "emQbit's ECB_AT91") /* Maintainer: emQbit.com */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = ecb_at91map_io, + .map_io = at91rm9200_map_io, + .init_early = ecb_at91init_early, .init_irq = ecb_at91init_irq, .init_machine = ecb_at91board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index a158a0c..bfc0062 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -26,11 +26,16 @@ #include <mach/board.h> #include <mach/at91rm9200_mc.h> +#include <mach/cpu.h> + #include "generic.h" -static void __init eco920_map_io(void) +static void __init eco920_init_early(void) { - at91rm9200_initialize(18432000, AT91RM9200_PQFP); + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + + at91rm9200_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); @@ -86,21 +91,6 @@ static struct platform_device eco920_flash = { .num_resources = 1, }; -static struct resource at91_beeper_resources[] = { - [0] = { - .start = AT91RM9200_BASE_TC3, - .end = AT91RM9200_BASE_TC3 + 0x39, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device at91_beeper = { - .name = "at91_beeper", - .id = 0, - .resource = at91_beeper_resources, - .num_resources = ARRAY_SIZE(at91_beeper_resources), -}; - static struct spi_board_info eco920_spi_devices[] = { { /* CAN controller */ .modalias = "tlv5638", @@ -139,18 +129,14 @@ static void __init eco920_board_init(void) AT91_SMC_TDF_(1) /* float time */ ); - at91_clock_associate("tc3_clk", &at91_beeper.dev, "at91_beeper"); - at91_set_B_periph(AT91_PIN_PB6, 0); - platform_device_register(&at91_beeper); - at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices)); } MACHINE_START(ECO920, "eco920") /* Maintainer: Sascha Hauer */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = eco920_map_io, + .map_io = at91rm9200_map_io, + .init_early = eco920_init_early, .init_irq = eco920_init_irq, .init_machine = eco920_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c index c8a62dc..466c063 100644 --- a/arch/arm/mach-at91/board-flexibity.c +++ b/arch/arm/mach-at91/board-flexibity.c @@ -37,7 +37,7 @@ #include "generic.h" -static void __init flexibity_map_io(void) +static void __init flexibity_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -154,9 +154,9 @@ static void __init flexibity_board_init(void) MACHINE_START(FLEXIBITY, "Flexibity Connect") /* Maintainer: Maxim Osipov */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = flexibity_map_io, + .map_io = at91sam9260_map_io, + .init_early = flexibity_init_early, .init_irq = flexibity_init_irq, .init_machine = flexibity_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c index dfc7dfe..e2d1dc9 100644 --- a/arch/arm/mach-at91/board-foxg20.c +++ b/arch/arm/mach-at91/board-foxg20.c @@ -57,7 +57,7 @@ */ -static void __init foxg20_map_io(void) +static void __init foxg20_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -266,9 +266,9 @@ static void __init foxg20_board_init(void) MACHINE_START(ACMENETUSFOXG20, "Acme Systems srl FOX Board G20") /* Maintainer: Sergio Tanzilli */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = foxg20_map_io, + .map_io = at91sam9260_map_io, + .init_early = foxg20_init_early, .init_irq = foxg20_init_irq, .init_machine = foxg20_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c index bc28136..1d4f36b 100644 --- a/arch/arm/mach-at91/board-gsia18s.c +++ b/arch/arm/mach-at91/board-gsia18s.c @@ -38,9 +38,9 @@ #include "sam9_smc.h" #include "generic.h" -static void __init gsia18s_map_io(void) +static void __init gsia18s_init_early(void) { - stamp9g20_map_io(); + stamp9g20_init_early(); /* * USART0 on ttyS1 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI). @@ -576,9 +576,9 @@ static void __init gsia18s_board_init(void) } MACHINE_START(GSIA18S, "GS_IA18_S") - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = gsia18s_map_io, + .map_io = at91sam9260_map_io, + .init_early = gsia18s_init_early, .init_irq = init_irq, .init_machine = gsia18s_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index d2e1f4e..9b003ff 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -35,14 +35,18 @@ #include <mach/board.h> #include <mach/gpio.h> +#include <mach/cpu.h> #include "generic.h" -static void __init kafa_map_io(void) +static void __init kafa_init_early(void) { + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_PQFP); + at91rm9200_initialize(18432000); /* Set up the LEDs */ at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4); @@ -94,9 +98,9 @@ static void __init kafa_board_init(void) MACHINE_START(KAFA, "Sperry-Sun KAFA") /* Maintainer: Sergei Sharonov */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = kafa_map_io, + .map_io = at91rm9200_map_io, + .init_early = kafa_init_early, .init_irq = kafa_init_irq, .init_machine = kafa_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index a13d206..a813a74 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -36,16 +36,19 @@ #include <mach/board.h> #include <mach/gpio.h> - +#include <mach/cpu.h> #include <mach/at91rm9200_mc.h> #include "generic.h" -static void __init kb9202_map_io(void) +static void __init kb9202_init_early(void) { + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + /* Initialize processor: 10 MHz crystal */ - at91rm9200_initialize(10000000, AT91RM9200_PQFP); + at91rm9200_initialize(10000000); /* Set up the LEDs */ at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18); @@ -136,9 +139,9 @@ static void __init kb9202_board_init(void) MACHINE_START(KB9200, "KB920x") /* Maintainer: KwikByte, Inc. */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = kb9202_map_io, + .map_io = at91rm9200_map_io, + .init_early = kb9202_init_early, .init_irq = kb9202_init_irq, .init_machine = kb9202_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index fe5f1d4..961e805 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -51,7 +51,7 @@ #include "generic.h" -static void __init neocore926_map_io(void) +static void __init neocore926_init_early(void) { /* Initialize processor: 20 MHz crystal */ at91sam9263_initialize(20000000); @@ -387,9 +387,9 @@ static void __init neocore926_board_init(void) MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926") /* Maintainer: ADENEO */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = neocore926_map_io, + .map_io = at91sam9263_map_io, + .init_early = neocore926_init_early, .init_irq = neocore926_init_irq, .init_machine = neocore926_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c index feb6578..21a21af 100644 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ b/arch/arm/mach-at91/board-pcontrol-g20.c @@ -37,9 +37,9 @@ #include "generic.h" -static void __init pcontrol_g20_map_io(void) +static void __init pcontrol_g20_init_early(void) { - stamp9g20_map_io(); + stamp9g20_init_early(); /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback A2 */ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS @@ -222,9 +222,9 @@ static void __init pcontrol_g20_board_init(void) MACHINE_START(PCONTROL_G20, "PControl G20") /* Maintainer: pgsellmann@portner-elektronik.at */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = pcontrol_g20_map_io, + .map_io = at91sam9260_map_io, + .init_early = pcontrol_g20_init_early, .init_irq = init_irq, .init_machine = pcontrol_g20_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index 55dad3a..756cc2a 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -43,10 +43,10 @@ #include "generic.h" -static void __init picotux200_map_io(void) +static void __init picotux200_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_BGA); + at91rm9200_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -123,9 +123,9 @@ static void __init picotux200_board_init(void) MACHINE_START(PICOTUX2XX, "picotux 200") /* Maintainer: Kleinhenz Elektronik GmbH */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = picotux200_map_io, + .map_io = at91rm9200_map_io, + .init_early = picotux200_init_early, .init_irq = picotux200_init_irq, .init_machine = picotux200_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index 69d15a8..d1a6001 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -48,7 +48,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ at91sam9260_initialize(12000000); @@ -268,9 +268,9 @@ static void __init ek_board_init(void) MACHINE_START(QIL_A9260, "CALAO QIL_A9260") /* Maintainer: calao-systems */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9260_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c index 4c1047c..aef9627 100644 --- a/arch/arm/mach-at91/board-rm9200dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -45,10 +45,10 @@ #include "generic.h" -static void __init dk_map_io(void) +static void __init dk_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_BGA); + at91rm9200_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); @@ -227,9 +227,9 @@ static void __init dk_board_init(void) MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK") /* Maintainer: SAN People/Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = dk_map_io, + .map_io = at91rm9200_map_io, + .init_early = dk_init_early, .init_irq = dk_init_irq, .init_machine = dk_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 9df1be8..015a021 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -45,10 +45,10 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_BGA); + at91rm9200_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2); @@ -193,9 +193,9 @@ static void __init ek_board_init(void) MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK") /* Maintainer: SAN People/Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = ek_map_io, + .map_io = at91rm9200_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index 25a26be..aaf1bf0 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -44,7 +44,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -212,9 +212,9 @@ static void __init ek_board_init(void) MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260") /* Maintainer: Olimex */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9260_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index de1816e..d600dc1 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -44,12 +44,13 @@ #include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> +#include <mach/system_rev.h> #include "sam9_smc.h" #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -191,11 +192,6 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata ek_nand_smc_config = { @@ -218,6 +214,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { + ek_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; @@ -356,9 +353,9 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9260_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 14acc90..f897f84 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -48,12 +48,13 @@ #include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> +#include <mach/system_rev.h> #include "sam9_smc.h" #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9261_initialize(18432000); @@ -197,11 +198,6 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PC15, .enable_pin = AT91_PIN_PC14, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata ek_nand_smc_config = { @@ -224,6 +220,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { + ek_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; @@ -623,9 +620,9 @@ MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK") MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK") #endif /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9261_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index bfe490d..605b26f 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -47,12 +47,13 @@ #include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> +#include <mach/system_rev.h> #include "sam9_smc.h" #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 16.367 MHz crystal */ at91sam9263_initialize(16367660); @@ -198,11 +199,6 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PA22, .enable_pin = AT91_PIN_PD15, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata ek_nand_smc_config = { @@ -225,6 +221,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { + ek_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; @@ -454,9 +451,9 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9263_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index ca8198b..7624cf0 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -43,6 +43,7 @@ #include <mach/board.h> #include <mach/gpio.h> #include <mach/at91sam9_smc.h> +#include <mach/system_rev.h> #include "sam9_smc.h" #include "generic.h" @@ -60,7 +61,7 @@ static int inline ek_have_2mmc(void) } -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -175,11 +176,6 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PC13, .enable_pin = AT91_PIN_PC14, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata ek_nand_smc_config = { @@ -202,6 +198,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { + ek_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; @@ -406,18 +403,18 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9260_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9260_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index 6c999db..063c95d 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -41,12 +41,13 @@ #include <mach/gpio.h> #include <mach/at91sam9_smc.h> #include <mach/at91_shdwc.h> +#include <mach/system_rev.h> #include "sam9_smc.h" #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ at91sam9g45_initialize(12000000); @@ -155,11 +156,6 @@ static struct atmel_nand_data __initdata ek_nand_data = { .rdy_pin = AT91_PIN_PC8, .enable_pin = AT91_PIN_PC14, .partition_info = nand_partitions, -#if defined(CONFIG_MTD_NAND_ATMEL_BUSWIDTH_16) - .bus_width_16 = 1, -#else - .bus_width_16 = 0, -#endif }; static struct sam9_smc_config __initdata ek_nand_smc_config = { @@ -182,6 +178,7 @@ static struct sam9_smc_config __initdata ek_nand_smc_config = { static void __init ek_add_device_nand(void) { + ek_nand_data.bus_width_16 = !board_have_nand_8bit(); /* setup bus-width (8 or 16) */ if (ek_nand_data.bus_width_16) ek_nand_smc_config.mode |= AT91_SMC_DBW_16; @@ -424,9 +421,9 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9g45_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index 3bf3408..effb399 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -38,7 +38,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ at91sam9rl_initialize(12000000); @@ -329,9 +329,9 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK") /* Maintainer: Atmel */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9rl_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index 17f7d9b..3eb0a11 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -40,7 +40,7 @@ #define SNAPPER9260_IO_EXP_GPIO(x) (NR_BUILTIN_GPIO + (x)) -static void __init snapper9260_map_io(void) +static void __init snapper9260_init_early(void) { at91sam9260_initialize(18432000); @@ -178,9 +178,9 @@ static void __init snapper9260_board_init(void) } MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module") - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = snapper9260_map_io, + .map_io = at91sam9260_map_io, + .init_early = snapper9260_init_early, .init_irq = snapper9260_init_irq, .init_machine = snapper9260_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index f8902b1..5e5c856 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -32,7 +32,7 @@ #include "generic.h" -void __init stamp9g20_map_io(void) +void __init stamp9g20_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ at91sam9260_initialize(18432000); @@ -44,9 +44,9 @@ void __init stamp9g20_map_io(void) at91_set_serial_console(0); } -static void __init stamp9g20evb_map_io(void) +static void __init stamp9g20evb_init_early(void) { - stamp9g20_map_io(); + stamp9g20_init_early(); /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS @@ -54,9 +54,9 @@ static void __init stamp9g20evb_map_io(void) | ATMEL_UART_DCD | ATMEL_UART_RI); } -static void __init portuxg20_map_io(void) +static void __init portuxg20_init_early(void) { - stamp9g20_map_io(); + stamp9g20_init_early(); /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS @@ -298,18 +298,18 @@ static void __init stamp9g20evb_board_init(void) MACHINE_START(PORTUXG20, "taskit PortuxG20") /* Maintainer: taskit GmbH */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = portuxg20_map_io, + .map_io = at91sam9260_map_io, + .init_early = portuxg20_init_early, .init_irq = init_irq, .init_machine = portuxg20_board_init, MACHINE_END MACHINE_START(STAMP9G20, "taskit Stamp9G20") /* Maintainer: taskit GmbH */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = stamp9g20evb_map_io, + .map_io = at91sam9260_map_io, + .init_early = stamp9g20evb_init_early, .init_irq = init_irq, .init_machine = stamp9g20evb_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c index 07784ba..0e784e6 100644 --- a/arch/arm/mach-at91/board-usb-a9260.c +++ b/arch/arm/mach-at91/board-usb-a9260.c @@ -48,7 +48,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ at91sam9260_initialize(12000000); @@ -228,9 +228,9 @@ static void __init ek_board_init(void) MACHINE_START(USB_A9260, "CALAO USB_A9260") /* Maintainer: calao-systems */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9260_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c index b6145089..cf626dd 100644 --- a/arch/arm/mach-at91/board-usb-a9263.c +++ b/arch/arm/mach-at91/board-usb-a9263.c @@ -47,7 +47,7 @@ #include "generic.h" -static void __init ek_map_io(void) +static void __init ek_init_early(void) { /* Initialize processor: 12.00 MHz crystal */ at91sam9263_initialize(12000000); @@ -244,9 +244,9 @@ static void __init ek_board_init(void) MACHINE_START(USB_A9263, "CALAO USB_A9263") /* Maintainer: calao-systems */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91sam926x_timer, - .map_io = ek_map_io, + .map_io = at91sam9263_map_io, + .init_early = ek_init_early, .init_irq = ek_init_irq, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index e0f0080..c208cc3 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -45,14 +45,18 @@ #include <mach/board.h> #include <mach/gpio.h> #include <mach/at91rm9200_mc.h> +#include <mach/cpu.h> #include "generic.h" -static void __init yl9200_map_io(void) +static void __init yl9200_init_early(void) { + /* Set cpu type: PQFP */ + at91rm9200_set_type(ARCH_REVISON_9200_PQFP); + /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000, AT91RM9200_PQFP); + at91rm9200_initialize(18432000); /* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */ at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17); @@ -594,9 +598,9 @@ static void __init yl9200_board_init(void) MACHINE_START(YL9200, "uCdragon YL-9200") /* Maintainer: S.Birtles */ - .boot_params = AT91_SDRAM_BASE + 0x100, .timer = &at91rm9200_timer, - .map_io = yl9200_map_io, + .map_io = at91rm9200_map_io, + .init_early = yl9200_init_early, .init_irq = yl9200_init_irq, .init_machine = yl9200_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index 9113da6..61873f3 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -163,7 +163,7 @@ static struct clk udpck = { .parent = &pllb, .mode = pmc_sys_mode, }; -static struct clk utmi_clk = { +struct clk utmi_clk = { .name = "utmi_clk", .parent = &main_clk, .pmc_mask = AT91_PMC_UPLLEN, /* in CKGR_UCKR */ @@ -182,7 +182,7 @@ static struct clk uhpck = { * memory, interfaces to on-chip peripherals, the AIC, and sometimes more * (e.g baud rate generation). It's sourced from one of the primary clocks. */ -static struct clk mck = { +struct clk mck = { .name = "mck", .pmc_mask = AT91_PMC_MCKRDY, /* in PMC_SR */ }; @@ -215,43 +215,6 @@ static struct clk __init *at91_css_to_clk(unsigned long css) return NULL; } -/* - * Associate a particular clock with a function (eg, "uart") and device. - * The drivers can then request the same 'function' with several different - * devices and not care about which clock name to use. - */ -void __init at91_clock_associate(const char *id, struct device *dev, const char *func) -{ - struct clk *clk = clk_get(NULL, id); - - if (!dev || !clk || !IS_ERR(clk_get(dev, func))) - return; - - clk->function = func; - clk->dev = dev; -} - -/* clocks cannot be de-registered no refcounting necessary */ -struct clk *clk_get(struct device *dev, const char *id) -{ - struct clk *clk; - - list_for_each_entry(clk, &clocks, node) { - if (strcmp(id, clk->name) == 0) - return clk; - if (clk->function && (dev == clk->dev) && strcmp(id, clk->function) == 0) - return clk; - } - - return ERR_PTR(-ENOENT); -} -EXPORT_SYMBOL(clk_get); - -void clk_put(struct clk *clk) -{ -} -EXPORT_SYMBOL(clk_put); - static void __clk_enable(struct clk *clk) { if (clk->parent) @@ -498,32 +461,38 @@ postcore_initcall(at91_clk_debugfs_init); /*------------------------------------------------------------------------*/ /* Register a new clock */ +static void __init at91_clk_add(struct clk *clk) +{ + list_add_tail(&clk->node, &clocks); + + clk->cl.con_id = clk->name; + clk->cl.clk = clk; + clkdev_add(&clk->cl); +} + int __init clk_register(struct clk *clk) { if (clk_is_peripheral(clk)) { if (!clk->parent) clk->parent = &mck; clk->mode = pmc_periph_mode; - list_add_tail(&clk->node, &clocks); } else if (clk_is_sys(clk)) { clk->parent = &mck; clk->mode = pmc_sys_mode; - - list_add_tail(&clk->node, &clocks); } #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS else if (clk_is_programmable(clk)) { clk->mode = pmc_sys_mode; init_programmable_clock(clk); - list_add_tail(&clk->node, &clocks); } #endif + at91_clk_add(clk); + return 0; } - /*------------------------------------------------------------------------*/ static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg) @@ -630,7 +599,7 @@ static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock) at91_sys_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP); } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() || cpu_is_at91sam9263() || cpu_is_at91sam9g20() || - cpu_is_at91sam9g10() || cpu_is_at572d940hf()) { + cpu_is_at91sam9g10()) { uhpck.pmc_mask = AT91SAM926x_PMC_UHP; udpck.pmc_mask = AT91SAM926x_PMC_UDP; } else if (cpu_is_at91cap9()) { @@ -754,19 +723,19 @@ int __init at91_clock_init(unsigned long main_clock) /* Register the PMC's standard clocks */ for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++) - list_add_tail(&standard_pmc_clocks[i]->node, &clocks); + at91_clk_add(standard_pmc_clocks[i]); if (cpu_has_pllb()) - list_add_tail(&pllb.node, &clocks); + at91_clk_add(&pllb); if (cpu_has_uhp()) - list_add_tail(&uhpck.node, &clocks); + at91_clk_add(&uhpck); if (cpu_has_udpfs()) - list_add_tail(&udpck.node, &clocks); + at91_clk_add(&udpck); if (cpu_has_utmi()) - list_add_tail(&utmi_clk.node, &clocks); + at91_clk_add(&utmi_clk); /* MCK and CPU clock are "always on" */ clk_enable(&mck); diff --git a/arch/arm/mach-at91/clock.h b/arch/arm/mach-at91/clock.h index 6cf4b78..c2e63e4 100644 --- a/arch/arm/mach-at91/clock.h +++ b/arch/arm/mach-at91/clock.h @@ -6,6 +6,8 @@ * published by the Free Software Foundation. */ +#include <linux/clkdev.h> + #define CLK_TYPE_PRIMARY 0x1 #define CLK_TYPE_PLL 0x2 #define CLK_TYPE_PROGRAMMABLE 0x4 @@ -16,8 +18,7 @@ struct clk { struct list_head node; const char *name; /* unique clock name */ - const char *function; /* function of the clock */ - struct device *dev; /* device associated with function */ + struct clk_lookup cl; unsigned long rate_hz; struct clk *parent; u32 pmc_mask; @@ -29,3 +30,18 @@ struct clk { extern int __init clk_register(struct clk *clk); +extern struct clk mck; +extern struct clk utmi_clk; + +#define CLKDEV_CON_ID(_id, _clk) \ + { \ + .con_id = _id, \ + .clk = _clk, \ + } + +#define CLKDEV_CON_DEV_ID(_con_id, _dev_id, _clk) \ + { \ + .con_id = _con_id, \ + .dev_id = _dev_id, \ + .clk = _clk, \ + } diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 0c66deb..8ff3418 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -8,8 +8,21 @@ * published by the Free Software Foundation. */ +#include <linux/clkdev.h> + + /* Map io */ +extern void __init at91rm9200_map_io(void); +extern void __init at91sam9260_map_io(void); +extern void __init at91sam9261_map_io(void); +extern void __init at91sam9263_map_io(void); +extern void __init at91sam9rl_map_io(void); +extern void __init at91sam9g45_map_io(void); +extern void __init at91x40_map_io(void); +extern void __init at91cap9_map_io(void); + /* Processors */ -extern void __init at91rm9200_initialize(unsigned long main_clock, unsigned short banks); +extern void __init at91rm9200_set_type(int type); +extern void __init at91rm9200_initialize(unsigned long main_clock); extern void __init at91sam9260_initialize(unsigned long main_clock); extern void __init at91sam9261_initialize(unsigned long main_clock); extern void __init at91sam9263_initialize(unsigned long main_clock); @@ -17,7 +30,6 @@ extern void __init at91sam9rl_initialize(unsigned long main_clock); extern void __init at91sam9g45_initialize(unsigned long main_clock); extern void __init at91x40_initialize(unsigned long main_clock); extern void __init at91cap9_initialize(unsigned long main_clock); -extern void __init at572d940hf_initialize(unsigned long main_clock); /* Interrupts */ extern void __init at91rm9200_init_interrupts(unsigned int priority[]); @@ -28,7 +40,6 @@ extern void __init at91sam9rl_init_interrupts(unsigned int priority[]); extern void __init at91sam9g45_init_interrupts(unsigned int priority[]); extern void __init at91x40_init_interrupts(unsigned int priority[]); extern void __init at91cap9_init_interrupts(unsigned int priority[]); -extern void __init at572d940hf_init_interrupts(unsigned int priority[]); extern void __init at91_aic_init(unsigned int priority[]); /* Timer */ @@ -39,8 +50,19 @@ extern struct sys_timer at91x40_timer; /* Clocks */ extern int __init at91_clock_init(unsigned long main_clock); +/* + * function to specify the clock of the default console. As we do not + * use the device/driver bus, the dev_name is not intialize. So we need + * to link the clock to a specific con_id only "usart" + */ +extern void __init at91rm9200_set_console_clock(int id); +extern void __init at91sam9260_set_console_clock(int id); +extern void __init at91sam9261_set_console_clock(int id); +extern void __init at91sam9263_set_console_clock(int id); +extern void __init at91sam9rl_set_console_clock(int id); +extern void __init at91sam9g45_set_console_clock(int id); +extern void __init at91cap9_set_console_clock(int id); struct device; -extern void __init at91_clock_associate(const char *id, struct device *dev, const char *func); /* Power Management */ extern void at91_irq_suspend(void); diff --git a/arch/arm/mach-at91/include/mach/at572d940hf.h b/arch/arm/mach-at91/include/mach/at572d940hf.h deleted file mode 100644 index be510cf..0000000 --- a/arch/arm/mach-at91/include/mach/at572d940hf.h +++ /dev/null @@ -1,123 +0,0 @@ -/* - * include/mach/at572d940hf.h - * - * Antonio R. Costa <costa.antonior@gmail.com> - * Copyright (C) 2008 Atmel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - */ - -#ifndef AT572D940HF_H -#define AT572D940HF_H - -/* - * Peripheral identifiers/interrupts. - */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ -#define AT572D940HF_ID_PIOA 2 /* Parallel IO Controller A */ -#define AT572D940HF_ID_PIOB 3 /* Parallel IO Controller B */ -#define AT572D940HF_ID_PIOC 4 /* Parallel IO Controller C */ -#define AT572D940HF_ID_EMAC 5 /* MACB ethernet controller */ -#define AT572D940HF_ID_US0 6 /* USART 0 */ -#define AT572D940HF_ID_US1 7 /* USART 1 */ -#define AT572D940HF_ID_US2 8 /* USART 2 */ -#define AT572D940HF_ID_MCI 9 /* Multimedia Card Interface */ -#define AT572D940HF_ID_UDP 10 /* USB Device Port */ -#define AT572D940HF_ID_TWI0 11 /* Two-Wire Interface 0 */ -#define AT572D940HF_ID_SPI0 12 /* Serial Peripheral Interface 0 */ -#define AT572D940HF_ID_SPI1 13 /* Serial Peripheral Interface 1 */ -#define AT572D940HF_ID_SSC0 14 /* Serial Synchronous Controller 0 */ -#define AT572D940HF_ID_SSC1 15 /* Serial Synchronous Controller 1 */ -#define AT572D940HF_ID_SSC2 16 /* Serial Synchronous Controller 2 */ -#define AT572D940HF_ID_TC0 17 /* Timer Counter 0 */ -#define AT572D940HF_ID_TC1 18 /* Timer Counter 1 */ -#define AT572D940HF_ID_TC2 19 /* Timer Counter 2 */ -#define AT572D940HF_ID_UHP 20 /* USB Host port */ -#define AT572D940HF_ID_SSC3 21 /* Serial Synchronous Controller 3 */ -#define AT572D940HF_ID_TWI1 22 /* Two-Wire Interface 1 */ -#define AT572D940HF_ID_CAN0 23 /* CAN Controller 0 */ -#define AT572D940HF_ID_CAN1 24 /* CAN Controller 1 */ -#define AT572D940HF_ID_MHALT 25 /* mAgicV HALT line */ -#define AT572D940HF_ID_MSIRQ0 26 /* mAgicV SIRQ0 line */ -#define AT572D940HF_ID_MEXC 27 /* mAgicV exception line */ -#define AT572D940HF_ID_MEDMA 28 /* mAgicV end of DMA line */ -#define AT572D940HF_ID_IRQ0 29 /* External Interrupt Source (IRQ0) */ -#define AT572D940HF_ID_IRQ1 30 /* External Interrupt Source (IRQ1) */ -#define AT572D940HF_ID_IRQ2 31 /* External Interrupt Source (IRQ2) */ - - -/* - * User Peripheral physical base addresses. - */ -#define AT572D940HF_BASE_TCB 0xfffa0000 -#define AT572D940HF_BASE_TC0 0xfffa0000 -#define AT572D940HF_BASE_TC1 0xfffa0040 -#define AT572D940HF_BASE_TC2 0xfffa0080 -#define AT572D940HF_BASE_UDP 0xfffa4000 -#define AT572D940HF_BASE_MCI 0xfffa8000 -#define AT572D940HF_BASE_TWI0 0xfffac000 -#define AT572D940HF_BASE_US0 0xfffb0000 -#define AT572D940HF_BASE_US1 0xfffb4000 -#define AT572D940HF_BASE_US2 0xfffb8000 -#define AT572D940HF_BASE_SSC0 0xfffbc000 -#define AT572D940HF_BASE_SSC1 0xfffc0000 -#define AT572D940HF_BASE_SSC2 0xfffc4000 -#define AT572D940HF_BASE_SPI0 0xfffc8000 -#define AT572D940HF_BASE_SPI1 0xfffcc000 -#define AT572D940HF_BASE_SSC3 0xfffd0000 -#define AT572D940HF_BASE_TWI1 0xfffd4000 -#define AT572D940HF_BASE_EMAC 0xfffd8000 -#define AT572D940HF_BASE_CAN0 0xfffdc000 -#define AT572D940HF_BASE_CAN1 0xfffe0000 -#define AT91_BASE_SYS 0xffffea00 - - -/* - * System Peripherals (offset from AT91_BASE_SYS) - */ -#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS) -#define AT91_SMC (0xffffec00 - AT91_BASE_SYS) -#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) -#define AT91_AIC (0xfffff000 - AT91_BASE_SYS) -#define AT91_DBGU (0xfffff200 - AT91_BASE_SYS) -#define AT91_PIOA (0xfffff400 - AT91_BASE_SYS) -#define AT91_PIOB (0xfffff600 - AT91_BASE_SYS) -#define AT91_PIOC (0xfffff800 - AT91_BASE_SYS) -#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) -#define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) -#define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) -#define AT91_WDT (0xfffffd40 - AT91_BASE_SYS) - -#define AT91_USART0 AT572D940HF_ID_US0 -#define AT91_USART1 AT572D940HF_ID_US1 -#define AT91_USART2 AT572D940HF_ID_US2 - - -/* - * Internal Memory. - */ -#define AT572D940HF_SRAM_BASE 0x00300000 /* Internal SRAM base address */ -#define AT572D940HF_SRAM_SIZE (48 * SZ_1K) /* Internal SRAM size (48Kb) */ - -#define AT572D940HF_ROM_BASE 0x00400000 /* Internal ROM base address */ -#define AT572D940HF_ROM_SIZE SZ_32K /* Internal ROM size (32Kb) */ - -#define AT572D940HF_UHP_BASE 0x00500000 /* USB Host controller */ - - -#endif diff --git a/arch/arm/mach-at91/include/mach/at572d940hf_matrix.h b/arch/arm/mach-at91/include/mach/at572d940hf_matrix.h deleted file mode 100644 index b6751df..0000000 --- a/arch/arm/mach-at91/include/mach/at572d940hf_matrix.h +++ /dev/null @@ -1,123 +0,0 @@ -/* - * include/mach//at572d940hf_matrix.h - * - * Antonio R. Costa <costa.antonior@gmail.com> - * Copyright (C) 2008 Atmel - * - * Copyright (C) 2005 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef AT572D940HF_MATRIX_H -#define AT572D940HF_MATRIX_H - -#define AT91_MATRIX_MCFG0 (AT91_MATRIX + 0x00) /* Master Configuration Register 0 */ -#define AT91_MATRIX_MCFG1 (AT91_MATRIX + 0x04) /* Master Configuration Register 1 */ -#define AT91_MATRIX_MCFG2 (AT91_MATRIX + 0x08) /* Master Configuration Register 2 */ -#define AT91_MATRIX_MCFG3 (AT91_MATRIX + 0x0C) /* Master Configuration Register 3 */ -#define AT91_MATRIX_MCFG4 (AT91_MATRIX + 0x10) /* Master Configuration Register 4 */ -#define AT91_MATRIX_MCFG5 (AT91_MATRIX + 0x14) /* Master Configuration Register 5 */ - -#define AT91_MATRIX_ULBT (7 << 0) /* Undefined Length Burst Type */ -#define AT91_MATRIX_ULBT_INFINITE (0 << 0) -#define AT91_MATRIX_ULBT_SINGLE (1 << 0) -#define AT91_MATRIX_ULBT_FOUR (2 << 0) -#define AT91_MATRIX_ULBT_EIGHT (3 << 0) -#define AT91_MATRIX_ULBT_SIXTEEN (4 << 0) - -#define AT91_MATRIX_SCFG0 (AT91_MATRIX + 0x40) /* Slave Configuration Register 0 */ -#define AT91_MATRIX_SCFG1 (AT91_MATRIX + 0x44) /* Slave Configuration Register 1 */ -#define AT91_MATRIX_SCFG2 (AT91_MATRIX + 0x48) /* Slave Configuration Register 2 */ -#define AT91_MATRIX_SCFG3 (AT91_MATRIX + 0x4C) /* Slave Configuration Register 3 */ -#define AT91_MATRIX_SCFG4 (AT91_MATRIX + 0x50) /* Slave Configuration Register 4 */ -#define AT91_MATRIX_SLOT_CYCLE (0xff << 0) /* Maximum Number of Allowed Cycles for a Burst */ -#define AT91_MATRIX_DEFMSTR_TYPE (3 << 16) /* Default Master Type */ -#define AT91_MATRIX_DEFMSTR_TYPE_NONE (0 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_LAST (1 << 16) -#define AT91_MATRIX_DEFMSTR_TYPE_FIXED (2 << 16) -#define AT91_MATRIX_FIXED_DEFMSTR (0x7 << 18) /* Fixed Index of Default Master */ -#define AT91_MATRIX_ARBT (3 << 24) /* Arbitration Type */ -#define AT91_MATRIX_ARBT_ROUND_ROBIN (0 << 24) -#define AT91_MATRIX_ARBT_FIXED_PRIORITY (1 << 24) - -#define AT91_MATRIX_PRAS0 (AT91_MATRIX + 0x80) /* Priority Register A for Slave 0 */ -#define AT91_MATRIX_PRAS1 (AT91_MATRIX + 0x88) /* Priority Register A for Slave 1 */ -#define AT91_MATRIX_PRAS2 (AT91_MATRIX + 0x90) /* Priority Register A for Slave 2 */ -#define AT91_MATRIX_PRAS3 (AT91_MATRIX + 0x98) /* Priority Register A for Slave 3 */ -#define AT91_MATRIX_PRAS4 (AT91_MATRIX + 0xA0) /* Priority Register A for Slave 4 */ - -#define AT91_MATRIX_M0PR (3 << 0) /* Master 0 Priority */ -#define AT91_MATRIX_M1PR (3 << 4) /* Master 1 Priority */ -#define AT91_MATRIX_M2PR (3 << 8) /* Master 2 Priority */ -#define AT91_MATRIX_M3PR (3 << 12) /* Master 3 Priority */ -#define AT91_MATRIX_M4PR (3 << 16) /* Master 4 Priority */ -#define AT91_MATRIX_M5PR (3 << 20) /* Master 5 Priority */ -#define AT91_MATRIX_M6PR (3 << 24) /* Master 6 Priority */ - -#define AT91_MATRIX_MRCR (AT91_MATRIX + 0x100) /* Master Remap Control Register */ -#define AT91_MATRIX_RCB0 (1 << 0) /* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */ -#define AT91_MATRIX_RCB1 (1 << 1) /* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */ - -#define AT91_MATRIX_SFR0 (AT91_MATRIX + 0x110) /* Special Function Register 0 */ -#define AT91_MATRIX_SFR1 (AT91_MATRIX + 0x114) /* Special Function Register 1 */ -#define AT91_MATRIX_SFR2 (AT91_MATRIX + 0x118) /* Special Function Register 2 */ -#define AT91_MATRIX_SFR3 (AT91_MATRIX + 0x11C) /* Special Function Register 3 */ -#define AT91_MATRIX_SFR4 (AT91_MATRIX + 0x120) /* Special Function Register 4 */ -#define AT91_MATRIX_SFR5 (AT91_MATRIX + 0x124) /* Special Function Register 5 */ -#define AT91_MATRIX_SFR6 (AT91_MATRIX + 0x128) /* Special Function Register 6 */ -#define AT91_MATRIX_SFR7 (AT91_MATRIX + 0x12C) /* Special Function Register 7 */ -#define AT91_MATRIX_SFR8 (AT91_MATRIX + 0x130) /* Special Function Register 8 */ -#define AT91_MATRIX_SFR9 (AT91_MATRIX + 0x134) /* Special Function Register 9 */ -#define AT91_MATRIX_SFR10 (AT91_MATRIX + 0x138) /* Special Function Register 10 */ -#define AT91_MATRIX_SFR11 (AT91_MATRIX + 0x13C) /* Special Function Register 11 */ -#define AT91_MATRIX_SFR12 (AT91_MATRIX + 0x140) /* Special Function Register 12 */ -#define AT91_MATRIX_SFR13 (AT91_MATRIX + 0x144) /* Special Function Register 13 */ -#define AT91_MATRIX_SFR14 (AT91_MATRIX + 0x148) /* Special Function Register 14 */ -#define AT91_MATRIX_SFR15 (AT91_MATRIX + 0x14C) /* Special Function Register 15 */ - - -/* - * The following registers / bits are not defined in the Datasheet (Revision A) - */ - -#define AT91_MATRIX_TCR (AT91_MATRIX + 0x100) /* TCM Configuration Register */ -#define AT91_MATRIX_ITCM_SIZE (0xf << 0) /* Size of ITCM enabled memory block */ -#define AT91_MATRIX_ITCM_0 (0 << 0) -#define AT91_MATRIX_ITCM_16 (5 << 0) -#define AT91_MATRIX_ITCM_32 (6 << 0) -#define AT91_MATRIX_ITCM_64 (7 << 0) -#define AT91_MATRIX_DTCM_SIZE (0xf << 4) /* Size of DTCM enabled memory block */ -#define AT91_MATRIX_DTCM_0 (0 << 4) -#define AT91_MATRIX_DTCM_16 (5 << 4) -#define AT91_MATRIX_DTCM_32 (6 << 4) -#define AT91_MATRIX_DTCM_64 (7 << 4) - -#define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x11C) /* EBI Chip Select Assignment Register */ -#define AT91_MATRIX_CS1A (1 << 1) /* Chip Select 1 Assignment */ -#define AT91_MATRIX_CS1A_SMC (0 << 1) -#define AT91_MATRIX_CS1A_SDRAMC (1 << 1) -#define AT91_MATRIX_CS3A (1 << 3) /* Chip Select 3 Assignment */ -#define AT91_MATRIX_CS3A_SMC (0 << 3) -#define AT91_MATRIX_CS3A_SMC_SMARTMEDIA (1 << 3) -#define AT91_MATRIX_CS4A (1 << 4) /* Chip Select 4 Assignment */ -#define AT91_MATRIX_CS4A_SMC (0 << 4) -#define AT91_MATRIX_CS4A_SMC_CF1 (1 << 4) -#define AT91_MATRIX_CS5A (1 << 5) /* Chip Select 5 Assignment */ -#define AT91_MATRIX_CS5A_SMC (0 << 5) -#define AT91_MATRIX_CS5A_SMC_CF2 (1 << 5) -#define AT91_MATRIX_DBPUC (1 << 8) /* Data Bus Pull-up Configuration */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h index 9c6af97..6659938 100644 --- a/arch/arm/mach-at91/include/mach/at91cap9.h +++ b/arch/arm/mach-at91/include/mach/at91cap9.h @@ -20,8 +20,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ #define AT91CAP9_ID_PIOABCD 2 /* Parallel IO Controller A, B, C and D */ #define AT91CAP9_ID_MPB0 3 /* MP Block Peripheral 0 */ #define AT91CAP9_ID_MPB1 4 /* MP Block Peripheral 1 */ @@ -123,6 +121,4 @@ #define AT91CAP9_UDPHS_FIFO 0x00600000 /* USB High Speed Device Port */ #define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */ -#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6 - #endif diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h index 7898315..99e0f8d 100644 --- a/arch/arm/mach-at91/include/mach/at91rm9200.h +++ b/arch/arm/mach-at91/include/mach/at91rm9200.h @@ -19,8 +19,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripheral */ #define AT91RM9200_ID_PIOA 2 /* Parallel IO Controller A */ #define AT91RM9200_ID_PIOB 3 /* Parallel IO Controller B */ #define AT91RM9200_ID_PIOC 4 /* Parallel IO Controller C */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h index 4e79036..8b6bf83 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9260.h +++ b/arch/arm/mach-at91/include/mach/at91sam9260.h @@ -20,8 +20,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ #define AT91SAM9260_ID_PIOA 2 /* Parallel IO Controller A */ #define AT91SAM9260_ID_PIOB 3 /* Parallel IO Controller B */ #define AT91SAM9260_ID_PIOC 4 /* Parallel IO Controller C */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h index 2b56185..eafbdda 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9261.h +++ b/arch/arm/mach-at91/include/mach/at91sam9261.h @@ -18,8 +18,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ #define AT91SAM9261_ID_PIOA 2 /* Parallel IO Controller A */ #define AT91SAM9261_ID_PIOB 3 /* Parallel IO Controller B */ #define AT91SAM9261_ID_PIOC 4 /* Parallel IO Controller C */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h index 2091f1e..e2d3482 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9263.h +++ b/arch/arm/mach-at91/include/mach/at91sam9263.h @@ -18,8 +18,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Peripherals */ #define AT91SAM9263_ID_PIOA 2 /* Parallel IO Controller A */ #define AT91SAM9263_ID_PIOB 3 /* Parallel IO Controller B */ #define AT91SAM9263_ID_PIOCDE 4 /* Parallel IO Controller C, D and E */ diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h index a526869..659304a 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9g45.h +++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h @@ -18,8 +18,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Controller Interrupt */ #define AT91SAM9G45_ID_PIOA 2 /* Parallel I/O Controller A */ #define AT91SAM9G45_ID_PIOB 3 /* Parallel I/O Controller B */ #define AT91SAM9G45_ID_PIOC 4 /* Parallel I/O Controller C */ @@ -131,8 +129,6 @@ #define AT91SAM9G45_EHCI_BASE 0x00800000 /* USB Host controller (EHCI) */ #define AT91SAM9G45_VDEC_BASE 0x00900000 /* Video Decoder Controller */ -#define CONFIG_DRAM_BASE AT91_CHIPSELECT_6 - #define CONSISTENT_DMA_SIZE SZ_4M /* diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h index 87ba851..41dbbe6 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9rl.h +++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h @@ -17,8 +17,6 @@ /* * Peripheral identifiers/interrupts. */ -#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ -#define AT91_ID_SYS 1 /* System Controller */ #define AT91SAM9RL_ID_PIOA 2 /* Parallel IO Controller A */ #define AT91SAM9RL_ID_PIOB 3 /* Parallel IO Controller B */ #define AT91SAM9RL_ID_PIOC 4 /* Parallel IO Controller C */ diff --git a/arch/arm/mach-at91/include/mach/at91x40.h b/arch/arm/mach-at91/include/mach/at91x40.h index 063ac44..a152ff8 100644 --- a/arch/arm/mach-at91/include/mach/at91x40.h +++ b/arch/arm/mach-at91/include/mach/at91x40.h @@ -15,8 +15,6 @@ /* * IRQ list. */ -#define AT91_ID_FIQ 0 /* FIQ */ -#define AT91_ID_SYS 1 /* System Peripheral */ #define AT91X40_ID_USART0 2 /* USART port 0 */ #define AT91X40_ID_USART1 3 /* USART port 1 */ #define AT91X40_ID_TC0 4 /* Timer/Counter 0 */ diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index 2b499eb..ed544a0 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -90,7 +90,7 @@ struct at91_eth_data { extern void __init at91_add_device_eth(struct at91_eth_data *data); #if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91SAM9G20) || defined(CONFIG_ARCH_AT91CAP9) \ - || defined(CONFIG_ARCH_AT91SAM9G45) || defined(CONFIG_ARCH_AT572D940HF) + || defined(CONFIG_ARCH_AT91SAM9G45) #define eth_platform_data at91_eth_data #endif @@ -140,6 +140,7 @@ extern void __init at91_set_serial_console(unsigned portnr); extern struct platform_device *atmel_default_console_device; struct atmel_uart_data { + int num; /* port num */ short use_dma_tx; /* use transmit DMA? */ short use_dma_rx; /* use receive DMA? */ void __iomem *regs; /* virt. base address, if any */ @@ -203,9 +204,6 @@ extern void __init at91_init_leds(u8 cpu_led, u8 timer_led); extern void __init at91_gpio_leds(struct gpio_led *leds, int nr); extern void __init at91_pwm_leds(struct gpio_led *leds, int nr); - /* AT572D940HF DSP */ -extern void __init at91_add_device_mAgic(void); - /* FIXME: this needs a better location, but gets stuff building again */ extern int at91_suspend_entering_slow_clock(void); diff --git a/arch/arm/mach-at91/include/mach/clkdev.h b/arch/arm/mach-at91/include/mach/clkdev.h new file mode 100644 index 0000000..04b37a8 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/clkdev.h @@ -0,0 +1,7 @@ +#ifndef __ASM_MACH_CLKDEV_H +#define __ASM_MACH_CLKDEV_H + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do { } while (0) + +#endif diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index 0700f21..df966c2 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -34,8 +34,6 @@ #define ARCH_ID_AT91SAM9XE256 0x329a93a0 #define ARCH_ID_AT91SAM9XE512 0x329aa3a0 -#define ARCH_ID_AT572D940HF 0x0e0303e0 - #define ARCH_ID_AT91M40800 0x14080044 #define ARCH_ID_AT91R40807 0x44080746 #define ARCH_ID_AT91M40807 0x14080745 @@ -90,9 +88,16 @@ static inline unsigned long at91cap9_rev_identify(void) #endif #ifdef CONFIG_ARCH_AT91RM9200 +extern int rm9200_type; +#define ARCH_REVISON_9200_BGA (0 << 0) +#define ARCH_REVISON_9200_PQFP (1 << 0) #define cpu_is_at91rm9200() (at91_cpu_identify() == ARCH_ID_AT91RM9200) +#define cpu_is_at91rm9200_bga() (!cpu_is_at91rm9200_pqfp()) +#define cpu_is_at91rm9200_pqfp() (cpu_is_at91rm9200() && rm9200_type & ARCH_REVISON_9200_PQFP) #else #define cpu_is_at91rm9200() (0) +#define cpu_is_at91rm9200_bga() (0) +#define cpu_is_at91rm9200_pqfp() (0) #endif #ifdef CONFIG_ARCH_AT91SAM9260 @@ -181,12 +186,6 @@ static inline unsigned long at91cap9_rev_identify(void) #define cpu_is_at91cap9_revC() (0) #endif -#ifdef CONFIG_ARCH_AT572D940HF -#define cpu_is_at572d940hf() (at91_cpu_identify() == ARCH_ID_AT572D940HF) -#else -#define cpu_is_at572d940hf() (0) -#endif - /* * Since this is ARM, we will never run on any AVR32 CPU. But these * definitions may reduce clutter in common drivers. diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index 3d64a75..1008b9f 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -32,13 +32,17 @@ #include <mach/at91cap9.h> #elif defined(CONFIG_ARCH_AT91X40) #include <mach/at91x40.h> -#elif defined(CONFIG_ARCH_AT572D940HF) -#include <mach/at572d940hf.h> #else #error "Unsupported AT91 processor" #endif +/* + * Peripheral identifiers/interrupts. + */ +#define AT91_ID_FIQ 0 /* Advanced Interrupt Controller (FIQ) */ +#define AT91_ID_SYS 1 /* System Peripherals */ + #ifdef CONFIG_MMU /* * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF @@ -82,13 +86,6 @@ #define AT91_CHIPSELECT_6 0x70000000 #define AT91_CHIPSELECT_7 0x80000000 -/* SDRAM */ -#ifdef CONFIG_DRAM_BASE -#define AT91_SDRAM_BASE CONFIG_DRAM_BASE -#else -#define AT91_SDRAM_BASE AT91_CHIPSELECT_1 -#endif - /* Clocks */ #define AT91_SLOW_CLOCK 32768 /* slow clock */ diff --git a/arch/arm/mach-at91/include/mach/memory.h b/arch/arm/mach-at91/include/mach/memory.h index c2cfe50..401c207 100644 --- a/arch/arm/mach-at91/include/mach/memory.h +++ b/arch/arm/mach-at91/include/mach/memory.h @@ -23,6 +23,4 @@ #include <mach/hardware.h> -#define PLAT_PHYS_OFFSET (AT91_SDRAM_BASE) - #endif diff --git a/arch/arm/mach-at91/include/mach/stamp9g20.h b/arch/arm/mach-at91/include/mach/stamp9g20.h index 6120f9c..f62c0ab 100644 --- a/arch/arm/mach-at91/include/mach/stamp9g20.h +++ b/arch/arm/mach-at91/include/mach/stamp9g20.h @@ -1,7 +1,7 @@ #ifndef __MACH_STAMP9G20_H #define __MACH_STAMP9G20_H -void stamp9g20_map_io(void); +void stamp9g20_init_early(void); void stamp9g20_board_init(void); #endif diff --git a/arch/arm/mach-at91/include/mach/system_rev.h b/arch/arm/mach-at91/include/mach/system_rev.h new file mode 100644 index 0000000..b855ee7 --- /dev/null +++ b/arch/arm/mach-at91/include/mach/system_rev.h @@ -0,0 +1,25 @@ +/* + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Under GPLv2 only + */ + +#ifndef __ARCH_SYSTEM_REV_H__ +#define __ARCH_SYSTEM_REV_H__ + +/* + * board revision encoding + * mach specific + * the 16-31 bit are reserved for at91 generic information + * + * bit 31: + * 0 => nand 16 bit + * 1 => nand 8 bit + */ +#define BOARD_HAVE_NAND_8BIT (1 << 31) +static int inline board_have_nand_8bit(void) +{ + return system_rev & BOARD_HAVE_NAND_8BIT; +} + +#endif /* __ARCH_SYSTEM_REV_H__ */ diff --git a/arch/arm/mach-at91/include/mach/timex.h b/arch/arm/mach-at91/include/mach/timex.h index 05a6e8a..31ac2d9 100644 --- a/arch/arm/mach-at91/include/mach/timex.h +++ b/arch/arm/mach-at91/include/mach/timex.h @@ -82,11 +82,6 @@ #define AT91X40_MASTER_CLOCK 40000000 #define CLOCK_TICK_RATE (AT91X40_MASTER_CLOCK) -#elif defined(CONFIG_ARCH_AT572D940HF) - -#define AT572D940HF_MASTER_CLOCK 80000000 -#define CLOCK_TICK_RATE (AT572D940HF_MASTER_CLOCK/16) - #endif #endif diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index b95b919..133aac4 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -1055,7 +1055,7 @@ int da850_register_pm(struct platform_device *pdev) if (!pdata->cpupll_reg_base) return -ENOMEM; - pdata->ddrpll_reg_base = ioremap(DA8XX_PLL1_BASE, SZ_4K); + pdata->ddrpll_reg_base = ioremap(DA850_PLL1_BASE, SZ_4K); if (!pdata->ddrpll_reg_base) { ret = -ENOMEM; goto no_ddrpll_mem; diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 58a02dc..4e66881 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -24,23 +24,25 @@ #include "clock.h" #define DA8XX_TPCC_BASE 0x01c00000 -#define DA850_MMCSD1_BASE 0x01e1b000 -#define DA850_TPCC1_BASE 0x01e30000 #define DA8XX_TPTC0_BASE 0x01c08000 #define DA8XX_TPTC1_BASE 0x01c08400 -#define DA850_TPTC2_BASE 0x01e38000 #define DA8XX_WDOG_BASE 0x01c21000 /* DA8XX_TIMER64P1_BASE */ #define DA8XX_I2C0_BASE 0x01c22000 -#define DA8XX_RTC_BASE 0x01C23000 +#define DA8XX_RTC_BASE 0x01c23000 +#define DA8XX_MMCSD0_BASE 0x01c40000 +#define DA8XX_SPI0_BASE 0x01c41000 +#define DA830_SPI1_BASE 0x01e12000 +#define DA8XX_LCD_CNTRL_BASE 0x01e13000 +#define DA850_MMCSD1_BASE 0x01e1b000 #define DA8XX_EMAC_CPPI_PORT_BASE 0x01e20000 #define DA8XX_EMAC_CPGMACSS_BASE 0x01e22000 #define DA8XX_EMAC_CPGMAC_BASE 0x01e23000 #define DA8XX_EMAC_MDIO_BASE 0x01e24000 -#define DA8XX_GPIO_BASE 0x01e26000 #define DA8XX_I2C1_BASE 0x01e28000 -#define DA8XX_SPI0_BASE 0x01c41000 -#define DA830_SPI1_BASE 0x01e12000 +#define DA850_TPCC1_BASE 0x01e30000 +#define DA850_TPTC2_BASE 0x01e38000 #define DA850_SPI1_BASE 0x01f0e000 +#define DA8XX_DDR2_CTL_BASE 0xb0000000 #define DA8XX_EMAC_CTRL_REG_OFFSET 0x3000 #define DA8XX_EMAC_MOD_REG_OFFSET 0x2000 diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 22ebc64..8f4f736 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -33,6 +33,9 @@ #define DM365_MMCSD0_BASE 0x01D11000 #define DM365_MMCSD1_BASE 0x01D00000 +/* System control register offsets */ +#define DM64XX_VDD3P3V_PWDN 0x48 + static struct resource i2c_resources[] = { { .start = DAVINCI_I2C_BASE, diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index e4fc1af..ad64da7 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -64,13 +64,9 @@ extern unsigned int da850_max_speed; #define DA8XX_TIMER64P1_BASE 0x01c21000 #define DA8XX_GPIO_BASE 0x01e26000 #define DA8XX_PSC1_BASE 0x01e27000 -#define DA8XX_LCD_CNTRL_BASE 0x01e13000 -#define DA8XX_PLL1_BASE 0x01e1a000 -#define DA8XX_MMCSD0_BASE 0x01c40000 #define DA8XX_AEMIF_CS2_BASE 0x60000000 #define DA8XX_AEMIF_CS3_BASE 0x62000000 #define DA8XX_AEMIF_CTL_BASE 0x68000000 -#define DA8XX_DDR2_CTL_BASE 0xb0000000 #define DA8XX_ARM_RAM_BASE 0xffff0000 void __init da830_init(void); diff --git a/arch/arm/mach-davinci/include/mach/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h index c45ba1f..414e0b9 100644 --- a/arch/arm/mach-davinci/include/mach/hardware.h +++ b/arch/arm/mach-davinci/include/mach/hardware.h @@ -21,9 +21,6 @@ */ #define DAVINCI_SYSTEM_MODULE_BASE 0x01C40000 -/* System control register offsets */ -#define DM64XX_VDD3P3V_PWDN 0x48 - /* * I/O mapping */ diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig index 8051962..b92c1e5 100644 --- a/arch/arm/mach-exynos4/Kconfig +++ b/arch/arm/mach-exynos4/Kconfig @@ -169,9 +169,11 @@ config MACH_NURI select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 select S3C_DEV_I2C1 + select S3C_DEV_I2C3 select S3C_DEV_I2C5 select S5P_DEV_USB_EHCI select EXYNOS4_SETUP_I2C1 + select EXYNOS4_SETUP_I2C3 select EXYNOS4_SETUP_I2C5 select EXYNOS4_SETUP_SDHCI select SAMSUNG_DEV_PWM diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile index 7778975..683fc38 100644 --- a/arch/arm/mach-exynos4/Makefile +++ b/arch/arm/mach-exynos4/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_CPU_EXYNOS4210) += cpu.o init.o clock.o irq-combiner.o obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o gpiolib.o irq-eint.o dma.o obj-$(CONFIG_PM) += pm.o sleep.o obj-$(CONFIG_CPU_FREQ) += cpufreq.o +obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o diff --git a/arch/arm/mach-exynos4/cpuidle.c b/arch/arm/mach-exynos4/cpuidle.c new file mode 100644 index 0000000..bf7e96f --- /dev/null +++ b/arch/arm/mach-exynos4/cpuidle.c @@ -0,0 +1,86 @@ +/* linux/arch/arm/mach-exynos4/cpuidle.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/cpuidle.h> +#include <linux/io.h> + +#include <asm/proc-fns.h> + +static int exynos4_enter_idle(struct cpuidle_device *dev, + struct cpuidle_state *state); + +static struct cpuidle_state exynos4_cpuidle_set[] = { + [0] = { + .enter = exynos4_enter_idle, + .exit_latency = 1, + .target_residency = 100000, + .flags = CPUIDLE_FLAG_TIME_VALID, + .name = "IDLE", + .desc = "ARM clock gating(WFI)", + }, +}; + +static DEFINE_PER_CPU(struct cpuidle_device, exynos4_cpuidle_device); + +static struct cpuidle_driver exynos4_idle_driver = { + .name = "exynos4_idle", + .owner = THIS_MODULE, +}; + +static int exynos4_enter_idle(struct cpuidle_device *dev, + struct cpuidle_state *state) +{ + struct timeval before, after; + int idle_time; + + local_irq_disable(); + do_gettimeofday(&before); + + cpu_do_idle(); + + do_gettimeofday(&after); + local_irq_enable(); + idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC + + (after.tv_usec - before.tv_usec); + + return idle_time; +} + +static int __init exynos4_init_cpuidle(void) +{ + int i, max_cpuidle_state, cpu_id; + struct cpuidle_device *device; + + cpuidle_register_driver(&exynos4_idle_driver); + + for_each_cpu(cpu_id, cpu_online_mask) { + device = &per_cpu(exynos4_cpuidle_device, cpu_id); + device->cpu = cpu_id; + + device->state_count = (sizeof(exynos4_cpuidle_set) / + sizeof(struct cpuidle_state)); + + max_cpuidle_state = device->state_count; + + for (i = 0; i < max_cpuidle_state; i++) { + memcpy(&device->states[i], &exynos4_cpuidle_set[i], + sizeof(struct cpuidle_state)); + } + + if (cpuidle_register_device(device)) { + printk(KERN_ERR "CPUidle register device failed\n,"); + return -EIO; + } + } + return 0; +} +device_initcall(exynos4_init_cpuidle); diff --git a/arch/arm/mach-exynos4/mach-nuri.c b/arch/arm/mach-exynos4/mach-nuri.c index bb5d12f..642702b 100644 --- a/arch/arm/mach-exynos4/mach-nuri.c +++ b/arch/arm/mach-exynos4/mach-nuri.c @@ -12,6 +12,7 @@ #include <linux/serial_core.h> #include <linux/input.h> #include <linux/i2c.h> +#include <linux/i2c/atmel_mxt_ts.h> #include <linux/gpio_keys.h> #include <linux/gpio.h> #include <linux/regulator/machine.h> @@ -32,6 +33,8 @@ #include <plat/sdhci.h> #include <plat/ehci.h> #include <plat/clock.h> +#include <plat/gpio-cfg.h> +#include <plat/iic.h> #include <mach/map.h> @@ -259,6 +262,88 @@ static struct i2c_board_info i2c1_devs[] __initdata = { /* Gyro, To be updated */ }; +/* TSP */ +static u8 mxt_init_vals[] = { + /* MXT_GEN_COMMAND(6) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* MXT_GEN_POWER(7) */ + 0x20, 0xff, 0x32, + /* MXT_GEN_ACQUIRE(8) */ + 0x0a, 0x00, 0x05, 0x00, 0x00, 0x00, 0x09, 0x23, + /* MXT_TOUCH_MULTI(9) */ + 0x00, 0x00, 0x00, 0x13, 0x0b, 0x00, 0x00, 0x00, 0x02, 0x00, + 0x00, 0x01, 0x01, 0x0e, 0x0a, 0x0a, 0x0a, 0x0a, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, + /* MXT_TOUCH_KEYARRAY(15) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, + 0x00, + /* MXT_SPT_GPIOPWM(19) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* MXT_PROCI_GRIPFACE(20) */ + 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x50, 0x28, 0x04, + 0x0f, 0x0a, + /* MXT_PROCG_NOISE(22) */ + 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x23, 0x00, + 0x00, 0x05, 0x0f, 0x19, 0x23, 0x2d, 0x03, + /* MXT_TOUCH_PROXIMITY(23) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, + /* MXT_PROCI_ONETOUCH(24) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* MXT_SPT_SELFTEST(25) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + /* MXT_PROCI_TWOTOUCH(27) */ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + /* MXT_SPT_CTECONFIG(28) */ + 0x00, 0x00, 0x02, 0x08, 0x10, 0x00, +}; + +static struct mxt_platform_data mxt_platform_data = { + .config = mxt_init_vals, + .config_length = ARRAY_SIZE(mxt_init_vals), + + .x_line = 18, + .y_line = 11, + .x_size = 1024, + .y_size = 600, + .blen = 0x1, + .threshold = 0x28, + .voltage = 2800000, /* 2.8V */ + .orient = MXT_DIAGONAL_COUNTER, + .irqflags = IRQF_TRIGGER_FALLING, +}; + +static struct s3c2410_platform_i2c i2c3_data __initdata = { + .flags = 0, + .bus_num = 3, + .slave_addr = 0x10, + .frequency = 400 * 1000, + .sda_delay = 100, +}; + +static struct i2c_board_info i2c3_devs[] __initdata = { + { + I2C_BOARD_INFO("atmel_mxt_ts", 0x4a), + .platform_data = &mxt_platform_data, + .irq = IRQ_EINT(4), + }, +}; + +static void __init nuri_tsp_init(void) +{ + int gpio; + + /* TOUCH_INT: XEINT_4 */ + gpio = EXYNOS4_GPX0(4); + gpio_request(gpio, "TOUCH_INT"); + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); +} + /* GPIO I2C 5 (PMIC) */ static struct i2c_board_info i2c5_devs[] __initdata = { /* max8997, To be updated */ @@ -283,6 +368,7 @@ static struct platform_device *nuri_devices[] __initdata = { &s3c_device_wdt, &s3c_device_timer[0], &s5p_device_ehci, + &s3c_device_i2c3, /* NURI Devices */ &nuri_gpio_keys, @@ -300,8 +386,11 @@ static void __init nuri_map_io(void) static void __init nuri_machine_init(void) { nuri_sdhci_init(); + nuri_tsp_init(); i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs)); + s3c_i2c3_set_platdata(&i2c3_data); + i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs)); i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs)); nuri_ehci_init(); diff --git a/arch/arm/mach-gemini/board-wbd111.c b/arch/arm/mach-gemini/board-wbd111.c index af7b68a..88cc422 100644 --- a/arch/arm/mach-gemini/board-wbd111.c +++ b/arch/arm/mach-gemini/board-wbd111.c @@ -84,7 +84,6 @@ static struct sys_timer wbd111_timer = { .init = gemini_timer_init, }; -#ifdef CONFIG_MTD_PARTITIONS static struct mtd_partition wbd111_partitions[] = { { .name = "RedBoot", @@ -116,11 +115,7 @@ static struct mtd_partition wbd111_partitions[] = { .mask_flags = MTD_WRITEABLE, } }; -#define wbd111_num_partitions ARRAY_SIZE(wbd111_partitions) -#else -#define wbd111_partitions NULL -#define wbd111_num_partitions 0 -#endif /* CONFIG_MTD_PARTITIONS */ +#define wbd111_num_partitions ARRAY_SIZE(wbd111_partitions) static void __init wbd111_init(void) { diff --git a/arch/arm/mach-gemini/board-wbd222.c b/arch/arm/mach-gemini/board-wbd222.c index 99e5bbe..3a22034 100644 --- a/arch/arm/mach-gemini/board-wbd222.c +++ b/arch/arm/mach-gemini/board-wbd222.c @@ -84,7 +84,6 @@ static struct sys_timer wbd222_timer = { .init = gemini_timer_init, }; -#ifdef CONFIG_MTD_PARTITIONS static struct mtd_partition wbd222_partitions[] = { { .name = "RedBoot", @@ -116,11 +115,7 @@ static struct mtd_partition wbd222_partitions[] = { .mask_flags = MTD_WRITEABLE, } }; -#define wbd222_num_partitions ARRAY_SIZE(wbd222_partitions) -#else -#define wbd222_partitions NULL -#define wbd222_num_partitions 0 -#endif /* CONFIG_MTD_PARTITIONS */ +#define wbd222_num_partitions ARRAY_SIZE(wbd222_partitions) static void __init wbd222_init(void) { diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index 1407833..dca4f7f 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -60,7 +60,6 @@ static struct platform_device ixdp425_flash = { #if defined(CONFIG_MTD_NAND_PLATFORM) || \ defined(CONFIG_MTD_NAND_PLATFORM_MODULE) -#ifdef CONFIG_MTD_PARTITIONS const char *part_probes[] = { "cmdlinepart", NULL }; static struct mtd_partition ixdp425_partitions[] = { @@ -74,7 +73,6 @@ static struct mtd_partition ixdp425_partitions[] = { .size = MTDPART_SIZ_FULL }, }; -#endif static void ixdp425_flash_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) @@ -103,11 +101,9 @@ static struct platform_nand_data ixdp425_flash_nand_data = { .nr_chips = 1, .chip_delay = 30, .options = NAND_NO_AUTOINCR, -#ifdef CONFIG_MTD_PARTITIONS .part_probe_types = part_probes, .partitions = ixdp425_partitions, .nr_partitions = ARRAY_SIZE(ixdp425_partitions), -#endif }, .ctrl = { .cmd_ctrl = ixdp425_flash_nand_cmd_ctrl diff --git a/arch/arm/mach-netx/fb.c b/arch/arm/mach-netx/fb.c index 5b84bcd..b991323 100644 --- a/arch/arm/mach-netx/fb.c +++ b/arch/arm/mach-netx/fb.c @@ -103,7 +103,6 @@ static struct amba_device fb_device = { .flags = IORESOURCE_MEM, }, .irq = { NETX_IRQ_LCD, NO_IRQ }, - .periphid = 0x10112400, }; int netx_fb_init(struct clcd_board *board, struct clcd_panel *panel) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index b997a358..19d5891 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -288,6 +288,7 @@ config MACH_IGEP0030 depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CBB + select MACH_IGEP0020 config MACH_SBC3530 bool "OMAP3 SBC STALKER board" diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 66dfbcc..b148077 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -229,8 +229,6 @@ obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o \ obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o \ hsmmc.o -obj-$(CONFIG_MACH_IGEP0030) += board-igep0030.o \ - hsmmc.o obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o \ hsmmc.o obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o \ @@ -270,3 +268,5 @@ obj-$(CONFIG_ARCH_OMAP4) += hwspinlock.o disp-$(CONFIG_OMAP2_DSS) := display.o obj-y += $(disp-m) $(disp-y) + +obj-y += common-board-devices.o diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 1fa6bb8..d54969b 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -41,6 +41,7 @@ #include "mux.h" #include "hsmmc.h" +#include "common-board-devices.h" #define SDP2430_CS0_BASE 0x04000000 #define SECONDARY_LCD_GPIO 147 @@ -180,15 +181,6 @@ static struct twl4030_platform_data sdp2430_twldata = { .vmmc1 = &sdp2430_vmmc1, }; -static struct i2c_board_info __initdata sdp2430_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_24XX_SYS_NIRQ, - .platform_data = &sdp2430_twldata, - }, -}; - static struct i2c_board_info __initdata sdp2430_i2c1_boardinfo[] = { { I2C_BOARD_INFO("isp1301_omap", 0x2D), @@ -201,8 +193,7 @@ static int __init omap2430_i2c_init(void) { omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo, ARRAY_SIZE(sdp2430_i2c1_boardinfo)); - omap_register_i2c_bus(2, 2600, sdp2430_i2c_boardinfo, - ARRAY_SIZE(sdp2430_i2c_boardinfo)); + omap2_pmic_init("twl4030", &sdp2430_twldata); return 0; } @@ -217,11 +208,6 @@ static struct omap2_hsmmc_info mmc[] __initdata = { {} /* Terminator */ }; -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; static struct omap_usb_config sdp2430_usb_config __initdata = { .otg = 1, #ifdef CONFIG_USB_GADGET_OMAP @@ -240,8 +226,6 @@ static struct omap_board_mux board_mux[] __initdata = { static void __init omap_2430sdp_init(void) { - int ret; - omap2430_mux_init(board_mux, OMAP_PACKAGE_ZAC); omap_board_config = sdp2430_config; @@ -255,14 +239,13 @@ static void __init omap_2430sdp_init(void) omap2_usbfs_init(&sdp2430_usb_config); omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); board_smc91x_init(); /* Turn off secondary LCD backlight */ - ret = gpio_request(SECONDARY_LCD_GPIO, "Secondary LCD backlight"); - if (ret == 0) - gpio_direction_output(SECONDARY_LCD_GPIO, 0); + gpio_request_one(SECONDARY_LCD_GPIO, GPIOF_OUT_INIT_LOW, + "Secondary LCD backlight"); } static void __init omap_2430sdp_map_io(void) diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 23244cd..ae2963a 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -19,7 +19,6 @@ #include <linux/input.h> #include <linux/input/matrix_keypad.h> #include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> #include <linux/i2c/twl.h> #include <linux/regulator/machine.h> #include <linux/io.h> @@ -48,6 +47,7 @@ #include "hsmmc.h" #include "pm.h" #include "control.h" +#include "common-board-devices.h" #define CONFIG_DISABLE_HFCLK 1 @@ -59,24 +59,6 @@ #define TWL4030_MSECURE_GPIO 22 -/* FIXME: These values need to be updated based on more profiling on 3430sdp*/ -static struct cpuidle_params omap3_cpuidle_params_table[] = { - /* C1 */ - {1, 2, 2, 5}, - /* C2 */ - {1, 10, 10, 30}, - /* C3 */ - {1, 50, 50, 300}, - /* C4 */ - {1, 1500, 1800, 4000}, - /* C5 */ - {1, 2500, 7500, 12000}, - /* C6 */ - {1, 3000, 8500, 15000}, - /* C7 */ - {1, 10000, 30000, 300000}, -}; - static uint32_t board_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_RIGHT), @@ -123,63 +105,14 @@ static struct twl4030_keypad_data sdp3430_kp_data = { .rep = 1, }; -static int ts_gpio; /* Needed for ads7846_get_pendown_state */ - -/** - * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq - * - * @return - void. If request gpio fails then Flag KERN_ERR. - */ -static void ads7846_dev_init(void) -{ - if (gpio_request(ts_gpio, "ADS7846 pendown") < 0) { - printk(KERN_ERR "can't get ads746 pen down GPIO\n"); - return; - } - - gpio_direction_input(ts_gpio); - gpio_set_debounce(ts_gpio, 310); -} - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(ts_gpio); -} - -static struct ads7846_platform_data tsc2046_config __initdata = { - .get_pendown_state = ads7846_get_pendown_state, - .keep_vref_on = 1, - .wakeup = true, -}; - - -static struct omap2_mcspi_device_config tsc2046_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static struct spi_board_info sdp3430_spi_board_info[] __initdata = { - [0] = { - /* - * TSC2046 operates at a max freqency of 2MHz, so - * operate slightly below at 1.5MHz - */ - .modalias = "ads7846", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &tsc2046_mcspi_config, - .irq = 0, - .platform_data = &tsc2046_config, - }, -}; - - #define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 8 #define SDP3430_LCD_PANEL_ENABLE_GPIO 5 -static unsigned backlight_gpio; -static unsigned enable_gpio; +static struct gpio sdp3430_dss_gpios[] __initdata = { + {SDP3430_LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW, "LCD reset" }, + {SDP3430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW, "LCD Backlight"}, +}; + static int lcd_enabled; static int dvi_enabled; @@ -187,29 +120,11 @@ static void __init sdp3430_display_init(void) { int r; - enable_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO; - backlight_gpio = SDP3430_LCD_PANEL_BACKLIGHT_GPIO; - - r = gpio_request(enable_gpio, "LCD reset"); - if (r) { - printk(KERN_ERR "failed to get LCD reset GPIO\n"); - goto err0; - } - - r = gpio_request(backlight_gpio, "LCD Backlight"); - if (r) { - printk(KERN_ERR "failed to get LCD backlight GPIO\n"); - goto err1; - } - - gpio_direction_output(enable_gpio, 0); - gpio_direction_output(backlight_gpio, 0); + r = gpio_request_array(sdp3430_dss_gpios, + ARRAY_SIZE(sdp3430_dss_gpios)); + if (r) + printk(KERN_ERR "failed to get LCD control GPIOs\n"); - return; -err1: - gpio_free(enable_gpio); -err0: - return; } static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev) @@ -219,8 +134,8 @@ static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev) return -EINVAL; } - gpio_direction_output(enable_gpio, 1); - gpio_direction_output(backlight_gpio, 1); + gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 1); + gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 1); lcd_enabled = 1; @@ -231,8 +146,8 @@ static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev) { lcd_enabled = 0; - gpio_direction_output(enable_gpio, 0); - gpio_direction_output(backlight_gpio, 0); + gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 0); + gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 0); } static int sdp3430_panel_enable_dvi(struct omap_dss_device *dssdev) @@ -360,12 +275,10 @@ static int sdp3430_twl_gpio_setup(struct device *dev, omap2_hsmmc_init(mmc); /* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */ - gpio_request(gpio + 7, "sub_lcd_en_bkl"); - gpio_direction_output(gpio + 7, 0); + gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "sub_lcd_en_bkl"); /* gpio + 15 is "sub_lcd_nRST" (output) */ - gpio_request(gpio + 15, "sub_lcd_nRST"); - gpio_direction_output(gpio + 15, 0); + gpio_request_one(gpio + 15, GPIOF_OUT_INIT_LOW, "sub_lcd_nRST"); return 0; } @@ -580,20 +493,10 @@ static struct twl4030_platform_data sdp3430_twldata = { .vpll2 = &sdp3430_vpll2, }; -static struct i2c_board_info __initdata sdp3430_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &sdp3430_twldata, - }, -}; - static int __init omap3430_i2c_init(void) { /* i2c1 for PMIC only */ - omap_register_i2c_bus(1, 2600, sdp3430_i2c_boardinfo, - ARRAY_SIZE(sdp3430_i2c_boardinfo)); + omap3_pmic_init("twl4030", &sdp3430_twldata); /* i2c2 on camera connector (for sensor control) and optional isp1301 */ omap_register_i2c_bus(2, 400, NULL, 0); /* i2c3 on display connector (for DVI, tfp410) */ @@ -872,30 +775,22 @@ static struct flash_partitions sdp_flash_partitions[] = { }, }; -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static void __init omap_3430sdp_init(void) { + int gpio_pendown; + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_board_config = sdp3430_config; omap_board_config_size = ARRAY_SIZE(sdp3430_config); - omap3_pm_init_cpuidle(omap3_cpuidle_params_table); omap3430_i2c_init(); omap_display_init(&sdp3430_dss_data); if (omap_rev() > OMAP3430_REV_ES1_0) - ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV2; + gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV2; else - ts_gpio = SDP3430_TS_GPIO_IRQ_SDPV1; - sdp3430_spi_board_info[0].irq = gpio_to_irq(ts_gpio); - spi_register_board_info(sdp3430_spi_board_info, - ARRAY_SIZE(sdp3430_spi_board_info)); - ads7846_dev_init(); + gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV1; + omap_ads7846_init(1, gpio_pendown, 310, NULL); board_serial_init(); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); board_smc91x_init(); board_flash_init(sdp_flash_partitions, chip_sel_3430, 0); sdp3430_display_init(); diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 93edd7f..73fa90b 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -42,6 +42,7 @@ #include "hsmmc.h" #include "timer-gp.h" #include "control.h" +#include "common-board-devices.h" #define ETH_KS8851_IRQ 34 #define ETH_KS8851_POWER_ON 48 @@ -251,58 +252,22 @@ static struct spi_board_info sdp4430_spi_board_info[] __initdata = { }, }; +static struct gpio sdp4430_eth_gpios[] __initdata = { + { ETH_KS8851_POWER_ON, GPIOF_OUT_INIT_HIGH, "eth_power" }, + { ETH_KS8851_QUART, GPIOF_OUT_INIT_HIGH, "quart" }, + { ETH_KS8851_IRQ, GPIOF_IN, "eth_irq" }, +}; + static int omap_ethernet_init(void) { int status; /* Request of GPIO lines */ + status = gpio_request_array(sdp4430_eth_gpios, + ARRAY_SIZE(sdp4430_eth_gpios)); + if (status) + pr_err("Cannot request ETH GPIOs\n"); - status = gpio_request(ETH_KS8851_POWER_ON, "eth_power"); - if (status) { - pr_err("Cannot request GPIO %d\n", ETH_KS8851_POWER_ON); - return status; - } - - status = gpio_request(ETH_KS8851_QUART, "quart"); - if (status) { - pr_err("Cannot request GPIO %d\n", ETH_KS8851_QUART); - goto error1; - } - - status = gpio_request(ETH_KS8851_IRQ, "eth_irq"); - if (status) { - pr_err("Cannot request GPIO %d\n", ETH_KS8851_IRQ); - goto error2; - } - - /* Configuration of requested GPIO lines */ - - status = gpio_direction_output(ETH_KS8851_POWER_ON, 1); - if (status) { - pr_err("Cannot set output GPIO %d\n", ETH_KS8851_IRQ); - goto error3; - } - - status = gpio_direction_output(ETH_KS8851_QUART, 1); - if (status) { - pr_err("Cannot set output GPIO %d\n", ETH_KS8851_QUART); - goto error3; - } - - status = gpio_direction_input(ETH_KS8851_IRQ); - if (status) { - pr_err("Cannot set input GPIO %d\n", ETH_KS8851_IRQ); - goto error3; - } - - return 0; - -error3: - gpio_free(ETH_KS8851_IRQ); -error2: - gpio_free(ETH_KS8851_QUART); -error1: - gpio_free(ETH_KS8851_POWER_ON); return status; } @@ -575,14 +540,6 @@ static struct twl4030_platform_data sdp4430_twldata = { .usb = &omap4_usbphy_data }; -static struct i2c_board_info __initdata sdp4430_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl6030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = OMAP44XX_IRQ_SYS_1N, - .platform_data = &sdp4430_twldata, - }, -}; static struct i2c_board_info __initdata sdp4430_i2c_3_boardinfo[] = { { I2C_BOARD_INFO("tmp105", 0x48), @@ -598,12 +555,7 @@ static struct i2c_board_info __initdata sdp4430_i2c_4_boardinfo[] = { }; static int __init omap4_i2c_init(void) { - /* - * Phoenix Audio IC needs I2C1 to - * start with 400 KHz or less - */ - omap_register_i2c_bus(1, 400, sdp4430_i2c_boardinfo, - ARRAY_SIZE(sdp4430_i2c_boardinfo)); + omap4_pmic_init("twl6030", &sdp4430_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo, ARRAY_SIZE(sdp4430_i2c_3_boardinfo)); @@ -614,21 +566,13 @@ static int __init omap4_i2c_init(void) static void __init omap_sfh7741prox_init(void) { - int error; + int error; - error = gpio_request(OMAP4_SFH7741_ENABLE_GPIO, "sfh7741"); - if (error < 0) { + error = gpio_request_one(OMAP4_SFH7741_ENABLE_GPIO, + GPIOF_OUT_INIT_LOW, "sfh7741"); + if (error < 0) pr_err("%s:failed to request GPIO %d, error %d\n", __func__, OMAP4_SFH7741_ENABLE_GPIO, error); - return; - } - - error = gpio_direction_output(OMAP4_SFH7741_ENABLE_GPIO , 0); - if (error < 0) { - pr_err("%s: GPIO configuration failed: GPIO %d,error %d\n", - __func__, OMAP4_SFH7741_ENABLE_GPIO, error); - gpio_free(OMAP4_SFH7741_ENABLE_GPIO); - } } static void sdp4430_hdmi_mux_init(void) @@ -645,27 +589,19 @@ static void sdp4430_hdmi_mux_init(void) OMAP_PIN_INPUT_PULLUP); } +static struct gpio sdp4430_hdmi_gpios[] = { + { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" }, + { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, +}; + static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev) { int status; - status = gpio_request_one(HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, - "hdmi_gpio_hpd"); - if (status) { - pr_err("Cannot request GPIO %d\n", HDMI_GPIO_HPD); - return status; - } - status = gpio_request_one(HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, - "hdmi_gpio_ls_oe"); - if (status) { - pr_err("Cannot request GPIO %d\n", HDMI_GPIO_LS_OE); - goto error1; - } - - return 0; - -error1: - gpio_free(HDMI_GPIO_HPD); + status = gpio_request_array(sdp4430_hdmi_gpios, + ARRAY_SIZE(sdp4430_hdmi_gpios)); + if (status) + pr_err("%s: Cannot request HDMI GPIOs\n", __func__); return status; } diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index a890d24..5e438a7 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -89,19 +89,13 @@ static void __init am3517_crane_init(void) return; } - ret = gpio_request(GPIO_USB_POWER, "usb_ehci_enable"); + ret = gpio_request_one(GPIO_USB_POWER, GPIOF_OUT_INIT_HIGH, + "usb_ehci_enable"); if (ret < 0) { pr_err("Can not request GPIO %d\n", GPIO_USB_POWER); return; } - ret = gpio_direction_output(GPIO_USB_POWER, 1); - if (ret < 0) { - gpio_free(GPIO_USB_POWER); - pr_err("Unable to initialize EHCI power\n"); - return; - } - usbhs_init(&usbhs_bdata); } diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index ff8c59b..63af417 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -174,19 +174,14 @@ static void __init am3517_evm_rtc_init(void) int r; omap_mux_init_gpio(GPIO_RTCS35390A_IRQ, OMAP_PIN_INPUT_PULLUP); - r = gpio_request(GPIO_RTCS35390A_IRQ, "rtcs35390a-irq"); + + r = gpio_request_one(GPIO_RTCS35390A_IRQ, GPIOF_IN, "rtcs35390a-irq"); if (r < 0) { printk(KERN_WARNING "failed to request GPIO#%d\n", GPIO_RTCS35390A_IRQ); return; } - r = gpio_direction_input(GPIO_RTCS35390A_IRQ); - if (r < 0) { - printk(KERN_WARNING "GPIO#%d cannot be configured as input\n", - GPIO_RTCS35390A_IRQ); - gpio_free(GPIO_RTCS35390A_IRQ); - return; - } + am3517evm_i2c1_boardinfo[0].irq = gpio_to_irq(GPIO_RTCS35390A_IRQ); } @@ -242,6 +237,15 @@ static int dvi_enabled; #if defined(CONFIG_PANEL_SHARP_LQ043T1DG01) || \ defined(CONFIG_PANEL_SHARP_LQ043T1DG01_MODULE) +static struct gpio am3517_evm_dss_gpios[] __initdata = { + /* GPIO 182 = LCD Backlight Power */ + { LCD_PANEL_BKLIGHT_PWR, GPIOF_OUT_INIT_HIGH, "lcd_backlight_pwr" }, + /* GPIO 181 = LCD Panel PWM */ + { LCD_PANEL_PWM, GPIOF_OUT_INIT_HIGH, "lcd bl enable" }, + /* GPIO 176 = LCD Panel Power enable pin */ + { LCD_PANEL_PWR, GPIOF_OUT_INIT_HIGH, "dvi enable" }, +}; + static void __init am3517_evm_display_init(void) { int r; @@ -249,41 +253,15 @@ static void __init am3517_evm_display_init(void) omap_mux_init_gpio(LCD_PANEL_PWR, OMAP_PIN_INPUT_PULLUP); omap_mux_init_gpio(LCD_PANEL_BKLIGHT_PWR, OMAP_PIN_INPUT_PULLDOWN); omap_mux_init_gpio(LCD_PANEL_PWM, OMAP_PIN_INPUT_PULLDOWN); - /* - * Enable GPIO 182 = LCD Backlight Power - */ - r = gpio_request(LCD_PANEL_BKLIGHT_PWR, "lcd_backlight_pwr"); + + r = gpio_request_array(am3517_evm_dss_gpios, + ARRAY_SIZE(am3517_evm_dss_gpios)); if (r) { - printk(KERN_ERR "failed to get lcd_backlight_pwr\n"); + printk(KERN_ERR "failed to get DSS panel control GPIOs\n"); return; } - gpio_direction_output(LCD_PANEL_BKLIGHT_PWR, 1); - /* - * Enable GPIO 181 = LCD Panel PWM - */ - r = gpio_request(LCD_PANEL_PWM, "lcd_pwm"); - if (r) { - printk(KERN_ERR "failed to get lcd_pwm\n"); - goto err_1; - } - gpio_direction_output(LCD_PANEL_PWM, 1); - /* - * Enable GPIO 176 = LCD Panel Power enable pin - */ - r = gpio_request(LCD_PANEL_PWR, "lcd_panel_pwr"); - if (r) { - printk(KERN_ERR "failed to get lcd_panel_pwr\n"); - goto err_2; - } - gpio_direction_output(LCD_PANEL_PWR, 1); printk(KERN_INFO "Display initialized successfully\n"); - return; - -err_2: - gpio_free(LCD_PANEL_PWM); -err_1: - gpio_free(LCD_PANEL_BKLIGHT_PWR); } #else static void __init am3517_evm_display_init(void) {} @@ -396,7 +374,7 @@ static struct omap_musb_board_data musb_board_data = { .power = 500, .set_phy_power = am35x_musb_phy_power, .clear_irq = am35x_musb_clear_irq, - .set_mode = am35x_musb_set_mode, + .set_mode = am35x_set_mode, .reset = am35x_musb_reset, }; diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index f4f8374..f3beb8e 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -202,6 +202,7 @@ static inline void __init apollon_init_smc91x(void) unsigned int rate; struct clk *gpmc_fck; int eth_cs; + int err; gpmc_fck = clk_get(NULL, "gpmc_fck"); /* Always on ENABLE_ON_INIT */ if (IS_ERR(gpmc_fck)) { @@ -245,15 +246,13 @@ static inline void __init apollon_init_smc91x(void) apollon_smc91x_resources[0].end = base + 0x30f; udelay(100); - omap_mux_init_gpio(74, 0); - if (gpio_request(APOLLON_ETHR_GPIO_IRQ, "SMC91x irq") < 0) { + omap_mux_init_gpio(APOLLON_ETHR_GPIO_IRQ, 0); + err = gpio_request_one(APOLLON_ETHR_GPIO_IRQ, GPIOF_IN, "SMC91x irq"); + if (err) { printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n", APOLLON_ETHR_GPIO_IRQ); gpmc_cs_free(APOLLON_ETH_CS); - goto out; } - gpio_direction_input(APOLLON_ETHR_GPIO_IRQ); - out: clk_disable(gpmc_fck); clk_put(gpmc_fck); @@ -280,20 +279,19 @@ static void __init omap_apollon_init_early(void) omap2_init_common_devices(NULL, NULL); } +static struct gpio apollon_gpio_leds[] __initdata = { + { LED0_GPIO13, GPIOF_OUT_INIT_LOW, "LED0" }, /* LED0 - AA10 */ + { LED1_GPIO14, GPIOF_OUT_INIT_LOW, "LED1" }, /* LED1 - AA6 */ + { LED2_GPIO15, GPIOF_OUT_INIT_LOW, "LED2" }, /* LED2 - AA4 */ +}; + static void __init apollon_led_init(void) { - /* LED0 - AA10 */ omap_mux_init_signal("vlynq_clk.gpio_13", 0); - gpio_request(LED0_GPIO13, "LED0"); - gpio_direction_output(LED0_GPIO13, 0); - /* LED1 - AA6 */ omap_mux_init_signal("vlynq_rx1.gpio_14", 0); - gpio_request(LED1_GPIO14, "LED1"); - gpio_direction_output(LED1_GPIO14, 0); - /* LED2 - AA4 */ omap_mux_init_signal("vlynq_rx0.gpio_15", 0); - gpio_request(LED2_GPIO15, "LED2"); - gpio_direction_output(LED2_GPIO15, 0); + + gpio_request_array(apollon_gpio_leds, ARRAY_SIZE(apollon_gpio_leds)); } static void __init apollon_usb_init(void) @@ -301,8 +299,7 @@ static void __init apollon_usb_init(void) /* USB device */ /* DEVICE_SUSPEND */ omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0); - gpio_request(12, "USB suspend"); - gpio_direction_output(12, 0); + gpio_request_one(12, GPIOF_OUT_INIT_LOW, "USB suspend"); omap2_usbfs_init(&apollon_usb_config); } diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 9340f6a..c63115b 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -54,6 +54,7 @@ #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "hsmmc.h" +#include "common-board-devices.h" #define CM_T35_GPIO_PENDOWN 57 @@ -66,86 +67,28 @@ #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) #include <linux/smsc911x.h> +#include <plat/gpmc-smsc911x.h> -static struct smsc911x_platform_config cm_t35_smsc911x_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, - .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, - .phy_interface = PHY_INTERFACE_MODE_MII, -}; - -static struct resource cm_t35_smsc911x_resources[] = { - { - .flags = IORESOURCE_MEM, - }, - { - .start = OMAP_GPIO_IRQ(CM_T35_SMSC911X_GPIO), - .end = OMAP_GPIO_IRQ(CM_T35_SMSC911X_GPIO), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct platform_device cm_t35_smsc911x_device = { - .name = "smsc911x", +static struct omap_smsc911x_platform_data cm_t35_smsc911x_cfg = { .id = 0, - .num_resources = ARRAY_SIZE(cm_t35_smsc911x_resources), - .resource = cm_t35_smsc911x_resources, - .dev = { - .platform_data = &cm_t35_smsc911x_config, - }, -}; - -static struct resource sb_t35_smsc911x_resources[] = { - { - .flags = IORESOURCE_MEM, - }, - { - .start = OMAP_GPIO_IRQ(SB_T35_SMSC911X_GPIO), - .end = OMAP_GPIO_IRQ(SB_T35_SMSC911X_GPIO), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, + .cs = CM_T35_SMSC911X_CS, + .gpio_irq = CM_T35_SMSC911X_GPIO, + .gpio_reset = -EINVAL, + .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, }; -static struct platform_device sb_t35_smsc911x_device = { - .name = "smsc911x", +static struct omap_smsc911x_platform_data sb_t35_smsc911x_cfg = { .id = 1, - .num_resources = ARRAY_SIZE(sb_t35_smsc911x_resources), - .resource = sb_t35_smsc911x_resources, - .dev = { - .platform_data = &cm_t35_smsc911x_config, - }, + .cs = SB_T35_SMSC911X_CS, + .gpio_irq = SB_T35_SMSC911X_GPIO, + .gpio_reset = -EINVAL, + .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, }; -static void __init cm_t35_init_smsc911x(struct platform_device *dev, - int cs, int irq_gpio) -{ - unsigned long cs_mem_base; - - if (gpmc_cs_request(cs, SZ_16M, &cs_mem_base) < 0) { - pr_err("CM-T35: Failed request for GPMC mem for smsc911x\n"); - return; - } - - dev->resource[0].start = cs_mem_base + 0x0; - dev->resource[0].end = cs_mem_base + 0xff; - - if ((gpio_request(irq_gpio, "ETH IRQ") == 0) && - (gpio_direction_input(irq_gpio) == 0)) { - gpio_export(irq_gpio, 0); - } else { - pr_err("CM-T35: could not obtain gpio for SMSC911X IRQ\n"); - return; - } - - platform_device_register(dev); -} - static void __init cm_t35_init_ethernet(void) { - cm_t35_init_smsc911x(&cm_t35_smsc911x_device, - CM_T35_SMSC911X_CS, CM_T35_SMSC911X_GPIO); - cm_t35_init_smsc911x(&sb_t35_smsc911x_device, - SB_T35_SMSC911X_CS, SB_T35_SMSC911X_GPIO); + gpmc_smsc911x_init(&cm_t35_smsc911x_cfg); + gpmc_smsc911x_init(&sb_t35_smsc911x_cfg); } #else static inline void __init cm_t35_init_ethernet(void) { return; } @@ -235,69 +178,10 @@ static void __init cm_t35_init_nand(void) static inline void cm_t35_init_nand(void) {} #endif -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ - defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) -#include <linux/spi/ads7846.h> - -static struct omap2_mcspi_device_config ads7846_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(CM_T35_GPIO_PENDOWN); -} - -static struct ads7846_platform_data ads7846_config = { - .x_max = 0x0fff, - .y_max = 0x0fff, - .x_plate_ohms = 180, - .pressure_max = 255, - .debounce_max = 10, - .debounce_tol = 3, - .debounce_rep = 1, - .get_pendown_state = ads7846_get_pendown_state, - .keep_vref_on = 1, -}; - -static struct spi_board_info cm_t35_spi_board_info[] __initdata = { - { - .modalias = "ads7846", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, - .irq = OMAP_GPIO_IRQ(CM_T35_GPIO_PENDOWN), - .platform_data = &ads7846_config, - }, -}; - -static void __init cm_t35_init_ads7846(void) -{ - if ((gpio_request(CM_T35_GPIO_PENDOWN, "ADS7846_PENDOWN") == 0) && - (gpio_direction_input(CM_T35_GPIO_PENDOWN) == 0)) { - gpio_export(CM_T35_GPIO_PENDOWN, 0); - } else { - pr_err("CM-T35: could not obtain gpio for ADS7846_PENDOWN\n"); - return; - } - - spi_register_board_info(cm_t35_spi_board_info, - ARRAY_SIZE(cm_t35_spi_board_info)); -} -#else -static inline void cm_t35_init_ads7846(void) {} -#endif - #define CM_T35_LCD_EN_GPIO 157 #define CM_T35_LCD_BL_GPIO 58 #define CM_T35_DVI_EN_GPIO 54 -static int lcd_bl_gpio; -static int lcd_en_gpio; -static int dvi_en_gpio; - static int lcd_enabled; static int dvi_enabled; @@ -308,8 +192,8 @@ static int cm_t35_panel_enable_lcd(struct omap_dss_device *dssdev) return -EINVAL; } - gpio_set_value(lcd_en_gpio, 1); - gpio_set_value(lcd_bl_gpio, 1); + gpio_set_value(CM_T35_LCD_EN_GPIO, 1); + gpio_set_value(CM_T35_LCD_BL_GPIO, 1); lcd_enabled = 1; @@ -320,8 +204,8 @@ static void cm_t35_panel_disable_lcd(struct omap_dss_device *dssdev) { lcd_enabled = 0; - gpio_set_value(lcd_bl_gpio, 0); - gpio_set_value(lcd_en_gpio, 0); + gpio_set_value(CM_T35_LCD_BL_GPIO, 0); + gpio_set_value(CM_T35_LCD_EN_GPIO, 0); } static int cm_t35_panel_enable_dvi(struct omap_dss_device *dssdev) @@ -331,7 +215,7 @@ static int cm_t35_panel_enable_dvi(struct omap_dss_device *dssdev) return -EINVAL; } - gpio_set_value(dvi_en_gpio, 0); + gpio_set_value(CM_T35_DVI_EN_GPIO, 0); dvi_enabled = 1; return 0; @@ -339,7 +223,7 @@ static int cm_t35_panel_enable_dvi(struct omap_dss_device *dssdev) static void cm_t35_panel_disable_dvi(struct omap_dss_device *dssdev) { - gpio_set_value(dvi_en_gpio, 1); + gpio_set_value(CM_T35_DVI_EN_GPIO, 1); dvi_enabled = 0; } @@ -421,62 +305,38 @@ static struct spi_board_info cm_t35_lcd_spi_board_info[] __initdata = { }, }; +static struct gpio cm_t35_dss_gpios[] __initdata = { + { CM_T35_LCD_EN_GPIO, GPIOF_OUT_INIT_LOW, "lcd enable" }, + { CM_T35_LCD_BL_GPIO, GPIOF_OUT_INIT_LOW, "lcd bl enable" }, + { CM_T35_DVI_EN_GPIO, GPIOF_OUT_INIT_HIGH, "dvi enable" }, +}; + static void __init cm_t35_init_display(void) { int err; - lcd_en_gpio = CM_T35_LCD_EN_GPIO; - lcd_bl_gpio = CM_T35_LCD_BL_GPIO; - dvi_en_gpio = CM_T35_DVI_EN_GPIO; - spi_register_board_info(cm_t35_lcd_spi_board_info, ARRAY_SIZE(cm_t35_lcd_spi_board_info)); - err = gpio_request(lcd_en_gpio, "LCD RST"); - if (err) { - pr_err("CM-T35: failed to get LCD reset GPIO\n"); - goto out; - } - - err = gpio_request(lcd_bl_gpio, "LCD BL"); + err = gpio_request_array(cm_t35_dss_gpios, + ARRAY_SIZE(cm_t35_dss_gpios)); if (err) { - pr_err("CM-T35: failed to get LCD backlight control GPIO\n"); - goto err_lcd_bl; - } - - err = gpio_request(dvi_en_gpio, "DVI EN"); - if (err) { - pr_err("CM-T35: failed to get DVI reset GPIO\n"); - goto err_dvi_en; + pr_err("CM-T35: failed to request DSS control GPIOs\n"); + return; } - gpio_export(lcd_en_gpio, 0); - gpio_export(lcd_bl_gpio, 0); - gpio_export(dvi_en_gpio, 0); - gpio_direction_output(lcd_en_gpio, 0); - gpio_direction_output(lcd_bl_gpio, 0); - gpio_direction_output(dvi_en_gpio, 1); + gpio_export(CM_T35_LCD_EN_GPIO, 0); + gpio_export(CM_T35_LCD_BL_GPIO, 0); + gpio_export(CM_T35_DVI_EN_GPIO, 0); msleep(50); - gpio_set_value(lcd_en_gpio, 1); + gpio_set_value(CM_T35_LCD_EN_GPIO, 1); err = omap_display_init(&cm_t35_dss_data); if (err) { pr_err("CM-T35: failed to register DSS device\n"); - goto err_dev_reg; + gpio_free_array(cm_t35_dss_gpios, ARRAY_SIZE(cm_t35_dss_gpios)); } - - return; - -err_dev_reg: - gpio_free(dvi_en_gpio); -err_dvi_en: - gpio_free(lcd_bl_gpio); -err_lcd_bl: - gpio_free(lcd_en_gpio); -out: - - return; } static struct regulator_consumer_supply cm_t35_vmmc1_supply = { @@ -609,10 +469,8 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio, { int wlan_rst = gpio + 2; - if ((gpio_request(wlan_rst, "WLAN RST") == 0) && - (gpio_direction_output(wlan_rst, 1) == 0)) { + if (gpio_request_one(wlan_rst, GPIOF_OUT_INIT_HIGH, "WLAN RST") == 0) { gpio_export(wlan_rst, 0); - udelay(10); gpio_set_value(wlan_rst, 0); udelay(10); @@ -653,19 +511,9 @@ static struct twl4030_platform_data cm_t35_twldata = { .vpll2 = &cm_t35_vpll2, }; -static struct i2c_board_info __initdata cm_t35_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("tps65930", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &cm_t35_twldata, - }, -}; - static void __init cm_t35_init_i2c(void) { - omap_register_i2c_bus(1, 2600, cm_t35_i2c_boardinfo, - ARRAY_SIZE(cm_t35_i2c_boardinfo)); + omap3_pmic_init("tps65930", &cm_t35_twldata); } static void __init cm_t35_init_early(void) @@ -775,12 +623,6 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static struct omap_board_config_kernel cm_t35_config[] __initdata = { }; @@ -792,12 +634,12 @@ static void __init cm_t35_init(void) omap_serial_init(); cm_t35_init_i2c(); cm_t35_init_nand(); - cm_t35_init_ads7846(); + omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL); cm_t35_init_ethernet(); cm_t35_init_led(); cm_t35_init_display(); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); usbhs_init(&usbhs_bdata); } diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index a27e3ee..08f08e8 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -148,14 +148,13 @@ static void __init cm_t3517_init_rtc(void) { int err; - err = gpio_request(RTC_CS_EN_GPIO, "rtc cs en"); + err = gpio_request_one(RTC_CS_EN_GPIO, GPIOF_OUT_INIT_HIGH, + "rtc cs en"); if (err) { pr_err("CM-T3517: rtc cs en gpio request failed: %d\n", err); return; } - gpio_direction_output(RTC_CS_EN_GPIO, 1); - platform_device_register(&cm_t3517_rtc_device); } #else @@ -182,11 +181,11 @@ static int cm_t3517_init_usbh(void) { int err; - err = gpio_request(USB_HUB_RESET_GPIO, "usb hub rst"); + err = gpio_request_one(USB_HUB_RESET_GPIO, GPIOF_OUT_INIT_LOW, + "usb hub rst"); if (err) { pr_err("CM-T3517: usb hub rst gpio request failed: %d\n", err); } else { - gpio_direction_output(USB_HUB_RESET_GPIO, 0); udelay(10); gpio_set_value(USB_HUB_RESET_GPIO, 1); msleep(1); diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 1d1b56a..cf520d7 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -51,7 +51,6 @@ #include <plat/mcspi.h> #include <linux/input/matrix_keypad.h> #include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> #include <linux/dm9000.h> #include <linux/interrupt.h> @@ -60,6 +59,7 @@ #include "mux.h" #include "hsmmc.h" #include "timer-gp.h" +#include "common-board-devices.h" #define NAND_BLOCK_SIZE SZ_128K @@ -97,13 +97,6 @@ static struct mtd_partition devkit8000_nand_partitions[] = { }, }; -static struct omap_nand_platform_data devkit8000_nand_data = { - .options = NAND_BUSWIDTH_16, - .parts = devkit8000_nand_partitions, - .nr_parts = ARRAY_SIZE(devkit8000_nand_partitions), - .dma_channel = -1, /* disable DMA in OMAP NAND driver */ -}; - static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, @@ -249,7 +242,7 @@ static int devkit8000_twl_gpio_setup(struct device *dev, /* TWL4030_GPIO_MAX + 0 is "LCD_PWREN" (out, active high) */ devkit8000_lcd_device.reset_gpio = gpio + TWL4030_GPIO_MAX + 0; ret = gpio_request_one(devkit8000_lcd_device.reset_gpio, - GPIOF_DIR_OUT | GPIOF_INIT_LOW, "LCD_PWREN"); + GPIOF_OUT_INIT_LOW, "LCD_PWREN"); if (ret < 0) { devkit8000_lcd_device.reset_gpio = -EINVAL; printk(KERN_ERR "Failed to request GPIO for LCD_PWRN\n"); @@ -258,7 +251,7 @@ static int devkit8000_twl_gpio_setup(struct device *dev, /* gpio + 7 is "DVI_PD" (out, active low) */ devkit8000_dvi_device.reset_gpio = gpio + 7; ret = gpio_request_one(devkit8000_dvi_device.reset_gpio, - GPIOF_DIR_OUT | GPIOF_INIT_LOW, "DVI PowerDown"); + GPIOF_OUT_INIT_LOW, "DVI PowerDown"); if (ret < 0) { devkit8000_dvi_device.reset_gpio = -EINVAL; printk(KERN_ERR "Failed to request GPIO for DVI PowerDown\n"); @@ -366,19 +359,9 @@ static struct twl4030_platform_data devkit8000_twldata = { .keypad = &devkit8000_kp_data, }; -static struct i2c_board_info __initdata devkit8000_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("tps65930", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &devkit8000_twldata, - }, -}; - static int __init devkit8000_i2c_init(void) { - omap_register_i2c_bus(1, 2600, devkit8000_i2c_boardinfo, - ARRAY_SIZE(devkit8000_i2c_boardinfo)); + omap3_pmic_init("tps65930", &devkit8000_twldata); /* Bus 3 is attached to the DVI port where devices like the pico DLP * projector don't work reliably with 400kHz */ omap_register_i2c_bus(3, 400, NULL, 0); @@ -463,56 +446,6 @@ static void __init devkit8000_init_irq(void) #endif } -static void __init devkit8000_ads7846_init(void) -{ - int gpio = OMAP3_DEVKIT_TS_GPIO; - int ret; - - ret = gpio_request(gpio, "ads7846_pen_down"); - if (ret < 0) { - printk(KERN_ERR "Failed to request GPIO %d for " - "ads7846 pen down IRQ\n", gpio); - return; - } - - gpio_direction_input(gpio); -} - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(OMAP3_DEVKIT_TS_GPIO); -} - -static struct ads7846_platform_data ads7846_config = { - .x_max = 0x0fff, - .y_max = 0x0fff, - .x_plate_ohms = 180, - .pressure_max = 255, - .debounce_max = 10, - .debounce_tol = 5, - .debounce_rep = 1, - .get_pendown_state = ads7846_get_pendown_state, - .keep_vref_on = 1, - .settle_delay_usecs = 150, -}; - -static struct omap2_mcspi_device_config ads7846_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static struct spi_board_info devkit8000_spi_board_info[] __initdata = { - { - .modalias = "ads7846", - .bus_num = 2, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, - .irq = OMAP_GPIO_IRQ(OMAP3_DEVKIT_TS_GPIO), - .platform_data = &ads7846_config, - } -}; - #define OMAP_DM9000_BASE 0x2c000000 static struct resource omap_dm9000_resources[] = { @@ -550,14 +483,14 @@ static void __init omap_dm9000_init(void) { unsigned char *eth_addr = omap_dm9000_platdata.dev_addr; struct omap_die_id odi; + int ret; - if (gpio_request(OMAP_DM9000_GPIO_IRQ, "dm9000 irq") < 0) { + ret = gpio_request_one(OMAP_DM9000_GPIO_IRQ, GPIOF_IN, "dm9000 irq"); + if (ret < 0) { printk(KERN_ERR "Failed to request GPIO%d for dm9000 IRQ\n", OMAP_DM9000_GPIO_IRQ); return; - } - - gpio_direction_input(OMAP_DM9000_GPIO_IRQ); + } /* init the mac address using DIE id */ omap_get_die_id(&odi); @@ -576,45 +509,6 @@ static struct platform_device *devkit8000_devices[] __initdata = { &omap_dm9000_dev, }; -static void __init devkit8000_flash_init(void) -{ - u8 cs = 0; - u8 nandcs = GPMC_CS_NUM + 1; - - /* find out the chip-select on which NAND exists */ - while (cs < GPMC_CS_NUM) { - u32 ret = 0; - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - - if ((ret & 0xC00) == 0x800) { - printk(KERN_INFO "Found NAND on CS%d\n", cs); - if (nandcs > GPMC_CS_NUM) - nandcs = cs; - } - cs++; - } - - if (nandcs > GPMC_CS_NUM) { - printk(KERN_INFO "NAND: Unable to find configuration " - "in GPMC\n "); - return; - } - - if (nandcs < GPMC_CS_NUM) { - devkit8000_nand_data.cs = nandcs; - - printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); - if (gpmc_nand_init(&devkit8000_nand_data) < 0) - printk(KERN_ERR "Unable to register NAND device\n"); - } -} - -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static const struct usbhs_omap_board_data usbhs_bdata __initconst = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, @@ -795,14 +689,13 @@ static void __init devkit8000_init(void) ARRAY_SIZE(devkit8000_devices)); omap_display_init(&devkit8000_dss_data); - spi_register_board_info(devkit8000_spi_board_info, - ARRAY_SIZE(devkit8000_spi_board_info)); - devkit8000_ads7846_init(); + omap_ads7846_init(2, OMAP3_DEVKIT_TS_GPIO, 0, NULL); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); usbhs_init(&usbhs_bdata); - devkit8000_flash_init(); + omap_nand_flash_init(NAND_BUSWIDTH_16, devkit8000_nand_partitions, + ARRAY_SIZE(devkit8000_nand_partitions)); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 3da64d3..0c1bfca 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -38,6 +38,7 @@ #include "mux.h" #include "hsmmc.h" #include "sdram-numonyx-m65kxxxxam.h" +#include "common-board-devices.h" #define IGEP2_SMSC911X_CS 5 #define IGEP2_SMSC911X_GPIO 176 @@ -54,6 +55,11 @@ #define IGEP2_RC_GPIO_WIFI_NRESET 139 #define IGEP2_RC_GPIO_BT_NRESET 137 +#define IGEP3_GPIO_LED0_GREEN 54 +#define IGEP3_GPIO_LED0_RED 53 +#define IGEP3_GPIO_LED1_RED 16 +#define IGEP3_GPIO_USBH_NRESET 183 + /* * IGEP2 Hardware Revision Table * @@ -68,6 +74,7 @@ #define IGEP2_BOARD_HWREV_B 0 #define IGEP2_BOARD_HWREV_C 1 +#define IGEP3_BOARD_HWREV 2 static u8 hwrev; @@ -75,24 +82,29 @@ static void __init igep2_get_revision(void) { u8 ret; + if (machine_is_igep0030()) { + hwrev = IGEP3_BOARD_HWREV; + return; + } + omap_mux_init_gpio(IGEP2_GPIO_LED1_RED, OMAP_PIN_INPUT); - if ((gpio_request(IGEP2_GPIO_LED1_RED, "GPIO_HW0_REV") == 0) && - (gpio_direction_input(IGEP2_GPIO_LED1_RED) == 0)) { - ret = gpio_get_value(IGEP2_GPIO_LED1_RED); - if (ret == 0) { - pr_info("IGEP2: Hardware Revision C (B-NON compatible)\n"); - hwrev = IGEP2_BOARD_HWREV_C; - } else if (ret == 1) { - pr_info("IGEP2: Hardware Revision B/C (B compatible)\n"); - hwrev = IGEP2_BOARD_HWREV_B; - } else { - pr_err("IGEP2: Unknown Hardware Revision\n"); - hwrev = -1; - } - } else { + if (gpio_request_one(IGEP2_GPIO_LED1_RED, GPIOF_IN, "GPIO_HW0_REV")) { pr_warning("IGEP2: Could not obtain gpio GPIO_HW0_REV\n"); pr_err("IGEP2: Unknown Hardware Revision\n"); + return; + } + + ret = gpio_get_value(IGEP2_GPIO_LED1_RED); + if (ret == 0) { + pr_info("IGEP2: Hardware Revision C (B-NON compatible)\n"); + hwrev = IGEP2_BOARD_HWREV_C; + } else if (ret == 1) { + pr_info("IGEP2: Hardware Revision B/C (B compatible)\n"); + hwrev = IGEP2_BOARD_HWREV_B; + } else { + pr_err("IGEP2: Unknown Hardware Revision\n"); + hwrev = -1; } gpio_free(IGEP2_GPIO_LED1_RED); @@ -111,7 +123,7 @@ static void __init igep2_get_revision(void) * So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048) */ -static struct mtd_partition igep2_onenand_partitions[] = { +static struct mtd_partition igep_onenand_partitions[] = { { .name = "X-Loader", .offset = 0, @@ -139,21 +151,21 @@ static struct mtd_partition igep2_onenand_partitions[] = { }, }; -static struct omap_onenand_platform_data igep2_onenand_data = { - .parts = igep2_onenand_partitions, - .nr_parts = ARRAY_SIZE(igep2_onenand_partitions), +static struct omap_onenand_platform_data igep_onenand_data = { + .parts = igep_onenand_partitions, + .nr_parts = ARRAY_SIZE(igep_onenand_partitions), .dma_channel = -1, /* disable DMA in OMAP OneNAND driver */ }; -static struct platform_device igep2_onenand_device = { +static struct platform_device igep_onenand_device = { .name = "omap2-onenand", .id = -1, .dev = { - .platform_data = &igep2_onenand_data, + .platform_data = &igep_onenand_data, }, }; -static void __init igep2_flash_init(void) +static void __init igep_flash_init(void) { u8 cs = 0; u8 onenandcs = GPMC_CS_NUM + 1; @@ -165,7 +177,7 @@ static void __init igep2_flash_init(void) /* Check if NAND/oneNAND is configured */ if ((ret & 0xC00) == 0x800) /* NAND found */ - pr_err("IGEP2: Unsupported NAND found\n"); + pr_err("IGEP: Unsupported NAND found\n"); else { ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); if ((ret & 0x3F) == (ONENAND_MAP >> 24)) @@ -175,85 +187,46 @@ static void __init igep2_flash_init(void) } if (onenandcs > GPMC_CS_NUM) { - pr_err("IGEP2: Unable to find configuration in GPMC\n"); + pr_err("IGEP: Unable to find configuration in GPMC\n"); return; } - igep2_onenand_data.cs = onenandcs; + igep_onenand_data.cs = onenandcs; - if (platform_device_register(&igep2_onenand_device) < 0) - pr_err("IGEP2: Unable to register OneNAND device\n"); + if (platform_device_register(&igep_onenand_device) < 0) + pr_err("IGEP: Unable to register OneNAND device\n"); } #else -static void __init igep2_flash_init(void) {} +static void __init igep_flash_init(void) {} #endif #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) #include <linux/smsc911x.h> +#include <plat/gpmc-smsc911x.h> -static struct smsc911x_platform_config igep2_smsc911x_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, - .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS , - .phy_interface = PHY_INTERFACE_MODE_MII, -}; - -static struct resource igep2_smsc911x_resources[] = { - { - .flags = IORESOURCE_MEM, - }, - { - .start = OMAP_GPIO_IRQ(IGEP2_SMSC911X_GPIO), - .end = OMAP_GPIO_IRQ(IGEP2_SMSC911X_GPIO), - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct platform_device igep2_smsc911x_device = { - .name = "smsc911x", - .id = 0, - .num_resources = ARRAY_SIZE(igep2_smsc911x_resources), - .resource = igep2_smsc911x_resources, - .dev = { - .platform_data = &igep2_smsc911x_config, - }, +static struct omap_smsc911x_platform_data smsc911x_cfg = { + .cs = IGEP2_SMSC911X_CS, + .gpio_irq = IGEP2_SMSC911X_GPIO, + .gpio_reset = -EINVAL, + .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, }; static inline void __init igep2_init_smsc911x(void) { - unsigned long cs_mem_base; - - if (gpmc_cs_request(IGEP2_SMSC911X_CS, SZ_16M, &cs_mem_base) < 0) { - pr_err("IGEP v2: Failed request for GPMC mem for smsc911x\n"); - gpmc_cs_free(IGEP2_SMSC911X_CS); - return; - } - - igep2_smsc911x_resources[0].start = cs_mem_base + 0x0; - igep2_smsc911x_resources[0].end = cs_mem_base + 0xff; - - if ((gpio_request(IGEP2_SMSC911X_GPIO, "SMSC911X IRQ") == 0) && - (gpio_direction_input(IGEP2_SMSC911X_GPIO) == 0)) { - gpio_export(IGEP2_SMSC911X_GPIO, 0); - } else { - pr_err("IGEP v2: Could not obtain gpio for for SMSC911X IRQ\n"); - return; - } - - platform_device_register(&igep2_smsc911x_device); + gpmc_smsc911x_init(&smsc911x_cfg); } #else static inline void __init igep2_init_smsc911x(void) { } #endif -static struct regulator_consumer_supply igep2_vmmc1_supply = +static struct regulator_consumer_supply igep_vmmc1_supply = REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"); /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ -static struct regulator_init_data igep2_vmmc1 = { +static struct regulator_init_data igep_vmmc1 = { .constraints = { .min_uV = 1850000, .max_uV = 3150000, @@ -264,13 +237,13 @@ static struct regulator_init_data igep2_vmmc1 = { | REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = 1, - .consumer_supplies = &igep2_vmmc1_supply, + .consumer_supplies = &igep_vmmc1_supply, }; -static struct regulator_consumer_supply igep2_vio_supply = +static struct regulator_consumer_supply igep_vio_supply = REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"); -static struct regulator_init_data igep2_vio = { +static struct regulator_init_data igep_vio = { .constraints = { .min_uV = 1800000, .max_uV = 1800000, @@ -282,34 +255,34 @@ static struct regulator_init_data igep2_vio = { | REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = 1, - .consumer_supplies = &igep2_vio_supply, + .consumer_supplies = &igep_vio_supply, }; -static struct regulator_consumer_supply igep2_vmmc2_supply = +static struct regulator_consumer_supply igep_vmmc2_supply = REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"); -static struct regulator_init_data igep2_vmmc2 = { +static struct regulator_init_data igep_vmmc2 = { .constraints = { .valid_modes_mask = REGULATOR_MODE_NORMAL, .always_on = 1, }, .num_consumer_supplies = 1, - .consumer_supplies = &igep2_vmmc2_supply, + .consumer_supplies = &igep_vmmc2_supply, }; -static struct fixed_voltage_config igep2_vwlan = { +static struct fixed_voltage_config igep_vwlan = { .supply_name = "vwlan", .microvolts = 3300000, .gpio = -EINVAL, .enabled_at_boot = 1, - .init_data = &igep2_vmmc2, + .init_data = &igep_vmmc2, }; -static struct platform_device igep2_vwlan_device = { +static struct platform_device igep_vwlan_device = { .name = "reg-fixed-voltage", .id = 0, .dev = { - .platform_data = &igep2_vwlan, + .platform_data = &igep_vwlan, }, }; @@ -334,20 +307,17 @@ static struct omap2_hsmmc_info mmc[] = { #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) #include <linux/leds.h> -static struct gpio_led igep2_gpio_leds[] = { +static struct gpio_led igep_gpio_leds[] = { [0] = { .name = "gpio-led:red:d0", - .gpio = IGEP2_GPIO_LED0_RED, .default_trigger = "default-off" }, [1] = { .name = "gpio-led:green:d0", - .gpio = IGEP2_GPIO_LED0_GREEN, .default_trigger = "default-off", }, [2] = { .name = "gpio-led:red:d1", - .gpio = IGEP2_GPIO_LED1_RED, .default_trigger = "default-off", }, [3] = { @@ -358,94 +328,119 @@ static struct gpio_led igep2_gpio_leds[] = { }, }; -static struct gpio_led_platform_data igep2_led_pdata = { - .leds = igep2_gpio_leds, - .num_leds = ARRAY_SIZE(igep2_gpio_leds), +static struct gpio_led_platform_data igep_led_pdata = { + .leds = igep_gpio_leds, + .num_leds = ARRAY_SIZE(igep_gpio_leds), }; -static struct platform_device igep2_led_device = { +static struct platform_device igep_led_device = { .name = "leds-gpio", .id = -1, .dev = { - .platform_data = &igep2_led_pdata, + .platform_data = &igep_led_pdata, }, }; -static void __init igep2_leds_init(void) +static void __init igep_leds_init(void) { - platform_device_register(&igep2_led_device); + if (machine_is_igep0020()) { + igep_gpio_leds[0].gpio = IGEP2_GPIO_LED0_RED; + igep_gpio_leds[1].gpio = IGEP2_GPIO_LED0_GREEN; + igep_gpio_leds[2].gpio = IGEP2_GPIO_LED1_RED; + } else { + igep_gpio_leds[0].gpio = IGEP3_GPIO_LED0_RED; + igep_gpio_leds[1].gpio = IGEP3_GPIO_LED0_GREEN; + igep_gpio_leds[2].gpio = IGEP3_GPIO_LED1_RED; + } + + platform_device_register(&igep_led_device); } #else -static inline void igep2_leds_init(void) +static struct gpio igep_gpio_leds[] __initdata = { + { -EINVAL, GPIOF_OUT_INIT_LOW, "gpio-led:red:d0" }, + { -EINVAL, GPIOF_OUT_INIT_LOW, "gpio-led:green:d0" }, + { -EINVAL, GPIOF_OUT_INIT_LOW, "gpio-led:red:d1" }, +}; + +static inline void igep_leds_init(void) { - if ((gpio_request(IGEP2_GPIO_LED0_RED, "gpio-led:red:d0") == 0) && - (gpio_direction_output(IGEP2_GPIO_LED0_RED, 0) == 0)) - gpio_export(IGEP2_GPIO_LED0_RED, 0); - else - pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_RED\n"); + int i; - if ((gpio_request(IGEP2_GPIO_LED0_GREEN, "gpio-led:green:d0") == 0) && - (gpio_direction_output(IGEP2_GPIO_LED0_GREEN, 0) == 0)) - gpio_export(IGEP2_GPIO_LED0_GREEN, 0); - else - pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_GREEN\n"); + if (machine_is_igep0020()) { + igep_gpio_leds[0].gpio = IGEP2_GPIO_LED0_RED; + igep_gpio_leds[1].gpio = IGEP2_GPIO_LED0_GREEN; + igep_gpio_leds[2].gpio = IGEP2_GPIO_LED1_RED; + } else { + igep_gpio_leds[0].gpio = IGEP3_GPIO_LED0_RED; + igep_gpio_leds[1].gpio = IGEP3_GPIO_LED0_GREEN; + igep_gpio_leds[2].gpio = IGEP3_GPIO_LED1_RED; + } - if ((gpio_request(IGEP2_GPIO_LED1_RED, "gpio-led:red:d1") == 0) && - (gpio_direction_output(IGEP2_GPIO_LED1_RED, 0) == 0)) - gpio_export(IGEP2_GPIO_LED1_RED, 0); - else - pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_RED\n"); + if (gpio_request_array(igep_gpio_leds, ARRAY_SIZE(igep_gpio_leds))) { + pr_warning("IGEP v2: Could not obtain leds gpios\n"); + return; + } + for (i = 0; i < ARRAY_SIZE(igep_gpio_leds); i++) + gpio_export(igep_gpio_leds[i].gpio, 0); } #endif -static int igep2_twl_gpio_setup(struct device *dev, +static struct gpio igep2_twl_gpios[] = { + { -EINVAL, GPIOF_IN, "GPIO_EHCI_NOC" }, + { -EINVAL, GPIOF_OUT_INIT_LOW, "GPIO_USBH_CPEN" }, +}; + +static int igep_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { + int ret; + /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); - /* - * REVISIT: need ehci-omap hooks for external VBUS - * power switch and overcurrent detect - */ - if ((gpio_request(gpio + 1, "GPIO_EHCI_NOC") < 0) || - (gpio_direction_input(gpio + 1) < 0)) - pr_err("IGEP2: Could not obtain gpio for EHCI NOC"); - - /* - * TWL4030_GPIO_MAX + 0 == ledA, GPIO_USBH_CPEN - * (out, active low) - */ - if ((gpio_request(gpio + TWL4030_GPIO_MAX, "GPIO_USBH_CPEN") < 0) || - (gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0) < 0)) - pr_err("IGEP2: Could not obtain gpio for USBH_CPEN"); - /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ #if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE) - if ((gpio_request(gpio+TWL4030_GPIO_MAX+1, "gpio-led:green:d1") == 0) - && (gpio_direction_output(gpio + TWL4030_GPIO_MAX + 1, 1) == 0)) + ret = gpio_request_one(gpio + TWL4030_GPIO_MAX + 1, GPIOF_OUT_INIT_HIGH, + "gpio-led:green:d1"); + if (ret == 0) gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0); else - pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_GREEN\n"); + pr_warning("IGEP: Could not obtain gpio GPIO_LED1_GREEN\n"); #else - igep2_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1; + igep_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1; #endif + if (machine_is_igep0030()) + return 0; + + /* + * REVISIT: need ehci-omap hooks for external VBUS + * power switch and overcurrent detect + */ + igep2_twl_gpios[0].gpio = gpio + 1; + + /* TWL4030_GPIO_MAX + 0 == ledA, GPIO_USBH_CPEN (out, active low) */ + igep2_twl_gpios[1].gpio = gpio + TWL4030_GPIO_MAX; + + ret = gpio_request_array(igep2_twl_gpios, ARRAY_SIZE(igep2_twl_gpios)); + if (ret < 0) + pr_err("IGEP2: Could not obtain gpio for USBH_CPEN"); + return 0; }; -static struct twl4030_gpio_platform_data igep2_twl4030_gpio_pdata = { +static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = { .gpio_base = OMAP_MAX_GPIO_LINES, .irq_base = TWL4030_GPIO_IRQ_BASE, .irq_end = TWL4030_GPIO_IRQ_END, .use_leds = true, - .setup = igep2_twl_gpio_setup, + .setup = igep_twl_gpio_setup, }; -static struct twl4030_usb_data igep2_usb_data = { +static struct twl4030_usb_data igep_usb_data = { .usb_mode = T2_USB_MODE_ULPI, }; @@ -507,16 +502,17 @@ static struct regulator_init_data igep2_vpll2 = { static void __init igep2_display_init(void) { - if (gpio_request(IGEP2_GPIO_DVI_PUP, "GPIO_DVI_PUP") && - gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1)) + int err = gpio_request_one(IGEP2_GPIO_DVI_PUP, GPIOF_OUT_INIT_HIGH, + "GPIO_DVI_PUP"); + if (err) pr_err("IGEP v2: Could not obtain gpio GPIO_DVI_PUP\n"); } -static struct platform_device *igep2_devices[] __initdata = { - &igep2_vwlan_device, +static struct platform_device *igep_devices[] __initdata = { + &igep_vwlan_device, }; -static void __init igep2_init_early(void) +static void __init igep_init_early(void) { omap2_init_common_infrastructure(); omap2_init_common_devices(m65kxxxxam_sdrc_params, @@ -561,27 +557,15 @@ static struct twl4030_keypad_data igep2_keypad_pdata = { .rep = 1, }; -static struct twl4030_platform_data igep2_twldata = { +static struct twl4030_platform_data igep_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, /* platform_data for children goes here */ - .usb = &igep2_usb_data, - .codec = &igep2_codec_data, - .gpio = &igep2_twl4030_gpio_pdata, - .keypad = &igep2_keypad_pdata, - .vmmc1 = &igep2_vmmc1, - .vpll2 = &igep2_vpll2, - .vio = &igep2_vio, -}; - -static struct i2c_board_info __initdata igep2_i2c1_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &igep2_twldata, - }, + .usb = &igep_usb_data, + .gpio = &igep_twl4030_gpio_pdata, + .vmmc1 = &igep_vmmc1, + .vio = &igep_vio, }; static struct i2c_board_info __initdata igep2_i2c3_boardinfo[] = { @@ -590,32 +574,29 @@ static struct i2c_board_info __initdata igep2_i2c3_boardinfo[] = { }, }; -static void __init igep2_i2c_init(void) +static void __init igep_i2c_init(void) { int ret; - ret = omap_register_i2c_bus(1, 2600, igep2_i2c1_boardinfo, - ARRAY_SIZE(igep2_i2c1_boardinfo)); - if (ret) - pr_warning("IGEP2: Could not register I2C1 bus (%d)\n", ret); + if (machine_is_igep0020()) { + /* + * Bus 3 is attached to the DVI port where devices like the + * pico DLP projector don't work reliably with 400kHz + */ + ret = omap_register_i2c_bus(3, 100, igep2_i2c3_boardinfo, + ARRAY_SIZE(igep2_i2c3_boardinfo)); + if (ret) + pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret); + + igep_twldata.codec = &igep2_codec_data; + igep_twldata.keypad = &igep2_keypad_pdata; + igep_twldata.vpll2 = &igep2_vpll2; + } - /* - * Bus 3 is attached to the DVI port where devices like the pico DLP - * projector don't work reliably with 400kHz - */ - ret = omap_register_i2c_bus(3, 100, igep2_i2c3_boardinfo, - ARRAY_SIZE(igep2_i2c3_boardinfo)); - if (ret) - pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret); + omap3_pmic_init("twl4030", &igep_twldata); } -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - -static const struct usbhs_omap_board_data usbhs_bdata __initconst = { +static const struct usbhs_omap_board_data igep2_usbhs_bdata __initconst = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, .port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, @@ -626,6 +607,17 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = { .reset_gpio_port[2] = -EINVAL, }; +static const struct usbhs_omap_board_data igep3_usbhs_bdata __initconst = { + .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, + + .phy_reset = true, + .reset_gpio_port[0] = -EINVAL, + .reset_gpio_port[1] = IGEP3_GPIO_USBH_NRESET, + .reset_gpio_port[2] = -EINVAL, +}; + #ifdef CONFIG_OMAP_MUX static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, @@ -633,82 +625,95 @@ static struct omap_board_mux board_mux[] __initdata = { #endif #if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) +static struct gpio igep_wlan_bt_gpios[] __initdata = { + { -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NPD" }, + { -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NRESET" }, + { -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_BT_NRESET" }, +}; -static void __init igep2_wlan_bt_init(void) +static void __init igep_wlan_bt_init(void) { - unsigned npd, wreset, btreset; + int err; /* GPIO's for WLAN-BT combo depends on hardware revision */ if (hwrev == IGEP2_BOARD_HWREV_B) { - npd = IGEP2_RB_GPIO_WIFI_NPD; - wreset = IGEP2_RB_GPIO_WIFI_NRESET; - btreset = IGEP2_RB_GPIO_BT_NRESET; - } else if (hwrev == IGEP2_BOARD_HWREV_C) { - npd = IGEP2_RC_GPIO_WIFI_NPD; - wreset = IGEP2_RC_GPIO_WIFI_NRESET; - btreset = IGEP2_RC_GPIO_BT_NRESET; + igep_wlan_bt_gpios[0].gpio = IGEP2_RB_GPIO_WIFI_NPD; + igep_wlan_bt_gpios[1].gpio = IGEP2_RB_GPIO_WIFI_NRESET; + igep_wlan_bt_gpios[2].gpio = IGEP2_RB_GPIO_BT_NRESET; + } else if (hwrev == IGEP2_BOARD_HWREV_C || machine_is_igep0030()) { + igep_wlan_bt_gpios[0].gpio = IGEP2_RC_GPIO_WIFI_NPD; + igep_wlan_bt_gpios[1].gpio = IGEP2_RC_GPIO_WIFI_NRESET; + igep_wlan_bt_gpios[2].gpio = IGEP2_RC_GPIO_BT_NRESET; } else return; - /* Set GPIO's for WLAN-BT combo module */ - if ((gpio_request(npd, "GPIO_WIFI_NPD") == 0) && - (gpio_direction_output(npd, 1) == 0)) { - gpio_export(npd, 0); - } else - pr_warning("IGEP2: Could not obtain gpio GPIO_WIFI_NPD\n"); - - if ((gpio_request(wreset, "GPIO_WIFI_NRESET") == 0) && - (gpio_direction_output(wreset, 1) == 0)) { - gpio_export(wreset, 0); - gpio_set_value(wreset, 0); - udelay(10); - gpio_set_value(wreset, 1); - } else - pr_warning("IGEP2: Could not obtain gpio GPIO_WIFI_NRESET\n"); + err = gpio_request_array(igep_wlan_bt_gpios, + ARRAY_SIZE(igep_wlan_bt_gpios)); + if (err) { + pr_warning("IGEP2: Could not obtain WIFI/BT gpios\n"); + return; + } + + gpio_export(igep_wlan_bt_gpios[0].gpio, 0); + gpio_export(igep_wlan_bt_gpios[1].gpio, 0); + gpio_export(igep_wlan_bt_gpios[2].gpio, 0); + + gpio_set_value(igep_wlan_bt_gpios[1].gpio, 0); + udelay(10); + gpio_set_value(igep_wlan_bt_gpios[1].gpio, 1); - if ((gpio_request(btreset, "GPIO_BT_NRESET") == 0) && - (gpio_direction_output(btreset, 1) == 0)) { - gpio_export(btreset, 0); - } else - pr_warning("IGEP2: Could not obtain gpio GPIO_BT_NRESET\n"); } #else -static inline void __init igep2_wlan_bt_init(void) { } +static inline void __init igep_wlan_bt_init(void) { } #endif -static void __init igep2_init(void) +static void __init igep_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); /* Get IGEP2 hardware revision */ igep2_get_revision(); /* Register I2C busses and drivers */ - igep2_i2c_init(); - platform_add_devices(igep2_devices, ARRAY_SIZE(igep2_devices)); - omap_display_init(&igep2_dss_data); + igep_i2c_init(); + platform_add_devices(igep_devices, ARRAY_SIZE(igep_devices)); omap_serial_init(); - usb_musb_init(&musb_board_data); - usbhs_init(&usbhs_bdata); + usb_musb_init(NULL); - igep2_flash_init(); - igep2_leds_init(); - igep2_display_init(); - igep2_init_smsc911x(); + igep_flash_init(); + igep_leds_init(); /* * WLAN-BT combo module from MuRata which has a Marvell WLAN * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface. */ - igep2_wlan_bt_init(); + igep_wlan_bt_init(); + if (machine_is_igep0020()) { + omap_display_init(&igep2_dss_data); + igep2_display_init(); + igep2_init_smsc911x(); + usbhs_init(&igep2_usbhs_bdata); + } else { + usbhs_init(&igep3_usbhs_bdata); + } } MACHINE_START(IGEP0020, "IGEP v2 board") .boot_params = 0x80000100, .reserve = omap_reserve, .map_io = omap3_map_io, - .init_early = igep2_init_early, + .init_early = igep_init_early, + .init_irq = omap_init_irq, + .init_machine = igep_init, + .timer = &omap_timer, +MACHINE_END + +MACHINE_START(IGEP0030, "IGEP OMAP3 module") + .boot_params = 0x80000100, + .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = igep_init_early, .init_irq = omap_init_irq, - .init_machine = igep2_init, + .init_machine = igep_init, .timer = &omap_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c deleted file mode 100644 index 2cf86c3..0000000 --- a/arch/arm/mach-omap2/board-igep0030.c +++ /dev/null @@ -1,458 +0,0 @@ -/* - * Copyright (C) 2010 - ISEE 2007 SL - * - * Modified from mach-omap2/board-generic.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/interrupt.h> - -#include <linux/regulator/machine.h> -#include <linux/regulator/fixed.h> -#include <linux/i2c/twl.h> -#include <linux/mmc/host.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include <plat/board.h> -#include <plat/common.h> -#include <plat/gpmc.h> -#include <plat/usb.h> -#include <plat/onenand.h> - -#include "mux.h" -#include "hsmmc.h" -#include "sdram-numonyx-m65kxxxxam.h" - -#define IGEP3_GPIO_LED0_GREEN 54 -#define IGEP3_GPIO_LED0_RED 53 -#define IGEP3_GPIO_LED1_RED 16 - -#define IGEP3_GPIO_WIFI_NPD 138 -#define IGEP3_GPIO_WIFI_NRESET 139 -#define IGEP3_GPIO_BT_NRESET 137 - -#define IGEP3_GPIO_USBH_NRESET 183 - - -#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ - defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) - -#define ONENAND_MAP 0x20000000 - -/* - * x2 Flash built-in COMBO POP MEMORY - * Since the device is equipped with two DataRAMs, and two-plane NAND - * Flash memory array, these two component enables simultaneous program - * of 4KiB. Plane1 has only even blocks such as block0, block2, block4 - * while Plane2 has only odd blocks such as block1, block3, block5. - * So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048) - */ - -static struct mtd_partition igep3_onenand_partitions[] = { - { - .name = "X-Loader", - .offset = 0, - .size = 2 * (64*(2*2048)) - }, - { - .name = "U-Boot", - .offset = MTDPART_OFS_APPEND, - .size = 6 * (64*(2*2048)), - }, - { - .name = "Environment", - .offset = MTDPART_OFS_APPEND, - .size = 2 * (64*(2*2048)), - }, - { - .name = "Kernel", - .offset = MTDPART_OFS_APPEND, - .size = 12 * (64*(2*2048)), - }, - { - .name = "File System", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static struct omap_onenand_platform_data igep3_onenand_pdata = { - .parts = igep3_onenand_partitions, - .nr_parts = ARRAY_SIZE(igep3_onenand_partitions), - .onenand_setup = NULL, - .dma_channel = -1, /* disable DMA in OMAP OneNAND driver */ -}; - -static struct platform_device igep3_onenand_device = { - .name = "omap2-onenand", - .id = -1, - .dev = { - .platform_data = &igep3_onenand_pdata, - }, -}; - -static void __init igep3_flash_init(void) -{ - u8 cs = 0; - u8 onenandcs = GPMC_CS_NUM + 1; - - for (cs = 0; cs < GPMC_CS_NUM; cs++) { - u32 ret; - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - - /* Check if NAND/oneNAND is configured */ - if ((ret & 0xC00) == 0x800) - /* NAND found */ - pr_err("IGEP3: Unsupported NAND found\n"); - else { - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7); - - if ((ret & 0x3F) == (ONENAND_MAP >> 24)) - /* OneNAND found */ - onenandcs = cs; - } - } - - if (onenandcs > GPMC_CS_NUM) { - pr_err("IGEP3: Unable to find configuration in GPMC\n"); - return; - } - - igep3_onenand_pdata.cs = onenandcs; - - if (platform_device_register(&igep3_onenand_device) < 0) - pr_err("IGEP3: Unable to register OneNAND device\n"); -} - -#else -static void __init igep3_flash_init(void) {} -#endif - -static struct regulator_consumer_supply igep3_vmmc1_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"); - -/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ -static struct regulator_init_data igep3_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &igep3_vmmc1_supply, -}; - -static struct regulator_consumer_supply igep3_vio_supply = - REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"); - -static struct regulator_init_data igep3_vio = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &igep3_vio_supply, -}; - -static struct regulator_consumer_supply igep3_vmmc2_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"); - -static struct regulator_init_data igep3_vmmc2 = { - .constraints = { - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .always_on = 1, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &igep3_vmmc2_supply, -}; - -static struct fixed_voltage_config igep3_vwlan = { - .supply_name = "vwlan", - .microvolts = 3300000, - .gpio = -EINVAL, - .enabled_at_boot = 1, - .init_data = &igep3_vmmc2, -}; - -static struct platform_device igep3_vwlan_device = { - .name = "reg-fixed-voltage", - .id = 0, - .dev = { - .platform_data = &igep3_vwlan, - }, -}; - -static struct omap2_hsmmc_info mmc[] = { - [0] = { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - }, -#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) - [1] = { - .mmc = 2, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - }, -#endif - {} /* Terminator */ -}; - -#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) -#include <linux/leds.h> - -static struct gpio_led igep3_gpio_leds[] = { - [0] = { - .name = "gpio-led:red:d0", - .gpio = IGEP3_GPIO_LED0_RED, - .default_trigger = "default-off" - }, - [1] = { - .name = "gpio-led:green:d0", - .gpio = IGEP3_GPIO_LED0_GREEN, - .default_trigger = "default-off", - }, - [2] = { - .name = "gpio-led:red:d1", - .gpio = IGEP3_GPIO_LED1_RED, - .default_trigger = "default-off", - }, - [3] = { - .name = "gpio-led:green:d1", - .default_trigger = "heartbeat", - .gpio = -EINVAL, /* gets replaced */ - }, -}; - -static struct gpio_led_platform_data igep3_led_pdata = { - .leds = igep3_gpio_leds, - .num_leds = ARRAY_SIZE(igep3_gpio_leds), -}; - -static struct platform_device igep3_led_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &igep3_led_pdata, - }, -}; - -static void __init igep3_leds_init(void) -{ - platform_device_register(&igep3_led_device); -} - -#else -static inline void igep3_leds_init(void) -{ - if ((gpio_request(IGEP3_GPIO_LED0_RED, "gpio-led:red:d0") == 0) && - (gpio_direction_output(IGEP3_GPIO_LED0_RED, 1) == 0)) { - gpio_export(IGEP3_GPIO_LED0_RED, 0); - gpio_set_value(IGEP3_GPIO_LED0_RED, 1); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_LED0_RED\n"); - - if ((gpio_request(IGEP3_GPIO_LED0_GREEN, "gpio-led:green:d0") == 0) && - (gpio_direction_output(IGEP3_GPIO_LED0_GREEN, 1) == 0)) { - gpio_export(IGEP3_GPIO_LED0_GREEN, 0); - gpio_set_value(IGEP3_GPIO_LED0_GREEN, 1); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_LED0_GREEN\n"); - - if ((gpio_request(IGEP3_GPIO_LED1_RED, "gpio-led:red:d1") == 0) && - (gpio_direction_output(IGEP3_GPIO_LED1_RED, 1) == 0)) { - gpio_export(IGEP3_GPIO_LED1_RED, 0); - gpio_set_value(IGEP3_GPIO_LED1_RED, 1); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_LED1_RED\n"); -} -#endif - -static int igep3_twl4030_gpio_setup(struct device *dev, - unsigned gpio, unsigned ngpio) -{ - /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - mmc[0].gpio_cd = gpio + 0; - omap2_hsmmc_init(mmc); - - /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ -#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE) - if ((gpio_request(gpio+TWL4030_GPIO_MAX+1, "gpio-led:green:d1") == 0) - && (gpio_direction_output(gpio + TWL4030_GPIO_MAX + 1, 1) == 0)) { - gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0); - gpio_set_value(gpio + TWL4030_GPIO_MAX + 1, 0); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_LED1_GREEN\n"); -#else - igep3_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1; -#endif - - return 0; -}; - -static struct twl4030_gpio_platform_data igep3_twl4030_gpio_pdata = { - .gpio_base = OMAP_MAX_GPIO_LINES, - .irq_base = TWL4030_GPIO_IRQ_BASE, - .irq_end = TWL4030_GPIO_IRQ_END, - .use_leds = true, - .setup = igep3_twl4030_gpio_setup, -}; - -static struct twl4030_usb_data igep3_twl4030_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - -static struct platform_device *igep3_devices[] __initdata = { - &igep3_vwlan_device, -}; - -static void __init igep3_init_early(void) -{ - omap2_init_common_infrastructure(); - omap2_init_common_devices(m65kxxxxam_sdrc_params, - m65kxxxxam_sdrc_params); -} - -static struct twl4030_platform_data igep3_twl4030_pdata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - - /* platform_data for children goes here */ - .usb = &igep3_twl4030_usb_data, - .gpio = &igep3_twl4030_gpio_pdata, - .vmmc1 = &igep3_vmmc1, - .vio = &igep3_vio, -}; - -static struct i2c_board_info __initdata igep3_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &igep3_twl4030_pdata, - }, -}; - -static int __init igep3_i2c_init(void) -{ - omap_register_i2c_bus(1, 2600, igep3_i2c_boardinfo, - ARRAY_SIZE(igep3_i2c_boardinfo)); - - return 0; -} - -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - -#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) - -static void __init igep3_wifi_bt_init(void) -{ - /* Configure MUX values for W-LAN + Bluetooth GPIO's */ - omap_mux_init_gpio(IGEP3_GPIO_WIFI_NPD, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(IGEP3_GPIO_WIFI_NRESET, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(IGEP3_GPIO_BT_NRESET, OMAP_PIN_OUTPUT); - - /* Set GPIO's for W-LAN + Bluetooth combo module */ - if ((gpio_request(IGEP3_GPIO_WIFI_NPD, "GPIO_WIFI_NPD") == 0) && - (gpio_direction_output(IGEP3_GPIO_WIFI_NPD, 1) == 0)) { - gpio_export(IGEP3_GPIO_WIFI_NPD, 0); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_WIFI_NPD\n"); - - if ((gpio_request(IGEP3_GPIO_WIFI_NRESET, "GPIO_WIFI_NRESET") == 0) && - (gpio_direction_output(IGEP3_GPIO_WIFI_NRESET, 1) == 0)) { - gpio_export(IGEP3_GPIO_WIFI_NRESET, 0); - gpio_set_value(IGEP3_GPIO_WIFI_NRESET, 0); - udelay(10); - gpio_set_value(IGEP3_GPIO_WIFI_NRESET, 1); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_WIFI_NRESET\n"); - - if ((gpio_request(IGEP3_GPIO_BT_NRESET, "GPIO_BT_NRESET") == 0) && - (gpio_direction_output(IGEP3_GPIO_BT_NRESET, 1) == 0)) { - gpio_export(IGEP3_GPIO_BT_NRESET, 0); - } else - pr_warning("IGEP3: Could not obtain gpio GPIO_BT_NRESET\n"); -} -#else -void __init igep3_wifi_bt_init(void) {} -#endif - -static const struct usbhs_omap_board_data usbhs_bdata __initconst = { - .port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED, - .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, - .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, - - .phy_reset = true, - .reset_gpio_port[0] = -EINVAL, - .reset_gpio_port[1] = IGEP3_GPIO_USBH_NRESET, - .reset_gpio_port[2] = -EINVAL, -}; - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - OMAP3_MUX(I2C2_SDA, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -static void __init igep3_init(void) -{ - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - - /* Register I2C busses and drivers */ - igep3_i2c_init(); - platform_add_devices(igep3_devices, ARRAY_SIZE(igep3_devices)); - omap_serial_init(); - usb_musb_init(&musb_board_data); - usbhs_init(&usbhs_bdata); - - igep3_flash_init(); - igep3_leds_init(); - - /* - * WLAN-BT combo module from MuRata which has a Marvell WLAN - * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface. - */ - igep3_wifi_bt_init(); - -} - -MACHINE_START(IGEP0030, "IGEP OMAP3 module") - .boot_params = 0x80000100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = igep3_init_early, - .init_irq = omap_init_irq, - .init_machine = igep3_init, - .timer = &omap_timer, -MACHINE_END diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index e2ba779..f7d6038 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -22,7 +22,6 @@ #include <linux/err.h> #include <linux/clk.h> #include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> #include <linux/io.h> @@ -43,47 +42,19 @@ #include <asm/delay.h> #include <plat/usb.h> +#include <plat/gpmc-smsc911x.h> #include "board-flash.h" #include "mux.h" #include "hsmmc.h" #include "control.h" +#include "common-board-devices.h" #define LDP_SMSC911X_CS 1 #define LDP_SMSC911X_GPIO 152 #define DEBUG_BASE 0x08000000 #define LDP_ETHR_START DEBUG_BASE -static struct resource ldp_smsc911x_resources[] = { - [0] = { - .start = LDP_ETHR_START, - .end = LDP_ETHR_START + SZ_4K, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = 0, - .end = 0, - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct smsc911x_platform_config ldp_smsc911x_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, - .flags = SMSC911X_USE_32BIT, - .phy_interface = PHY_INTERFACE_MODE_MII, -}; - -static struct platform_device ldp_smsc911x_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(ldp_smsc911x_resources), - .resource = ldp_smsc911x_resources, - .dev = { - .platform_data = &ldp_smsc911x_config, - }, -}; - static uint32_t board_keymap[] = { KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), @@ -197,82 +168,16 @@ static struct platform_device ldp_gpio_keys_device = { }, }; -static int ts_gpio; - -/** - * @brief ads7846_dev_init : Requests & sets GPIO line for pen-irq - * - * @return - void. If request gpio fails then Flag KERN_ERR. - */ -static void ads7846_dev_init(void) -{ - if (gpio_request(ts_gpio, "ads7846 irq") < 0) { - printk(KERN_ERR "can't get ads746 pen down GPIO\n"); - return; - } - - gpio_direction_input(ts_gpio); - gpio_set_debounce(ts_gpio, 310); -} - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(ts_gpio); -} - -static struct ads7846_platform_data tsc2046_config __initdata = { - .get_pendown_state = ads7846_get_pendown_state, - .keep_vref_on = 1, -}; - -static struct omap2_mcspi_device_config tsc2046_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static struct spi_board_info ldp_spi_board_info[] __initdata = { - [0] = { - /* - * TSC2046 operates at a max freqency of 2MHz, so - * operate slightly below at 1.5MHz - */ - .modalias = "ads7846", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &tsc2046_mcspi_config, - .irq = 0, - .platform_data = &tsc2046_config, - }, +static struct omap_smsc911x_platform_data smsc911x_cfg = { + .cs = LDP_SMSC911X_CS, + .gpio_irq = LDP_SMSC911X_GPIO, + .gpio_reset = -EINVAL, + .flags = SMSC911X_USE_32BIT, }; static inline void __init ldp_init_smsc911x(void) { - int eth_cs; - unsigned long cs_mem_base; - int eth_gpio = 0; - - eth_cs = LDP_SMSC911X_CS; - - if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n"); - return; - } - - ldp_smsc911x_resources[0].start = cs_mem_base + 0x0; - ldp_smsc911x_resources[0].end = cs_mem_base + 0xff; - udelay(100); - - eth_gpio = LDP_SMSC911X_GPIO; - - ldp_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio); - - if (gpio_request(eth_gpio, "smsc911x irq") < 0) { - printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n", - eth_gpio); - return; - } - gpio_direction_input(eth_gpio); + gpmc_smsc911x_init(&smsc911x_cfg); } static struct platform_device ldp_lcd_device = { @@ -360,19 +265,9 @@ static struct twl4030_platform_data ldp_twldata = { .keypad = &ldp_kp_twl4030_data, }; -static struct i2c_board_info __initdata ldp_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &ldp_twldata, - }, -}; - static int __init omap_i2c_init(void) { - omap_register_i2c_bus(1, 2600, ldp_i2c_boardinfo, - ARRAY_SIZE(ldp_i2c_boardinfo)); + omap3_pmic_init("twl4030", &ldp_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); return 0; @@ -389,7 +284,6 @@ static struct omap2_hsmmc_info mmc[] __initdata = { }; static struct platform_device *ldp_devices[] __initdata = { - &ldp_smsc911x_device, &ldp_lcd_device, &ldp_gpio_keys_device, }; @@ -400,12 +294,6 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static struct mtd_partition ldp_nand_partitions[] = { /* All the partition sizes are listed in terms of NAND block size */ { @@ -446,13 +334,9 @@ static void __init omap_ldp_init(void) ldp_init_smsc911x(); omap_i2c_init(); platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices)); - ts_gpio = 54; - ldp_spi_board_info[0].irq = gpio_to_irq(ts_gpio); - spi_register_board_info(ldp_spi_board_info, - ARRAY_SIZE(ldp_spi_board_info)); - ads7846_dev_init(); + omap_ads7846_init(1, 54, 310, NULL); omap_serial_init(); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); board_nand_init(ldp_nand_partitions, ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0); diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index e710cd9..8d74318 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -106,14 +106,13 @@ static void __init n8x0_usb_init(void) static char announce[] __initdata = KERN_INFO "TUSB 6010\n"; /* PM companion chip power control pin */ - ret = gpio_request(TUSB6010_GPIO_ENABLE, "TUSB6010 enable"); + ret = gpio_request_one(TUSB6010_GPIO_ENABLE, GPIOF_OUT_INIT_LOW, + "TUSB6010 enable"); if (ret != 0) { printk(KERN_ERR "Could not get TUSB power GPIO%i\n", TUSB6010_GPIO_ENABLE); return; } - gpio_direction_output(TUSB6010_GPIO_ENABLE, 0); - tusb_set_power(0); ret = tusb6010_setup_interface(&tusb_data, TUSB6010_REFCLK_19, 2, @@ -494,8 +493,12 @@ static struct omap_mmc_platform_data mmc1_data = { static struct omap_mmc_platform_data *mmc_data[OMAP24XX_NR_MMC]; -static void __init n8x0_mmc_init(void) +static struct gpio n810_emmc_gpios[] __initdata = { + { N810_EMMC_VSD_GPIO, GPIOF_OUT_INIT_LOW, "MMC slot 2 Vddf" }, + { N810_EMMC_VIO_GPIO, GPIOF_OUT_INIT_LOW, "MMC slot 2 Vdd" }, +}; +static void __init n8x0_mmc_init(void) { int err; @@ -512,27 +515,18 @@ static void __init n8x0_mmc_init(void) mmc1_data.slots[1].ban_openended = 1; } - err = gpio_request(N8X0_SLOT_SWITCH_GPIO, "MMC slot switch"); + err = gpio_request_one(N8X0_SLOT_SWITCH_GPIO, GPIOF_OUT_INIT_LOW, + "MMC slot switch"); if (err) return; - gpio_direction_output(N8X0_SLOT_SWITCH_GPIO, 0); - if (machine_is_nokia_n810()) { - err = gpio_request(N810_EMMC_VSD_GPIO, "MMC slot 2 Vddf"); - if (err) { - gpio_free(N8X0_SLOT_SWITCH_GPIO); - return; - } - gpio_direction_output(N810_EMMC_VSD_GPIO, 0); - - err = gpio_request(N810_EMMC_VIO_GPIO, "MMC slot 2 Vdd"); + err = gpio_request_array(n810_emmc_gpios, + ARRAY_SIZE(n810_emmc_gpios)); if (err) { gpio_free(N8X0_SLOT_SWITCH_GPIO); - gpio_free(N810_EMMC_VSD_GPIO); return; } - gpio_direction_output(N810_EMMC_VIO_GPIO, 0); } mmc_data[0] = &mmc1_data; diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 97750d4..be71426 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -52,6 +52,7 @@ #include "hsmmc.h" #include "timer-gp.h" #include "pm.h" +#include "common-board-devices.h" #define NAND_BLOCK_SIZE SZ_128K @@ -79,6 +80,12 @@ static u8 omap3_beagle_get_rev(void) return omap3_beagle_version; } +static struct gpio omap3_beagle_rev_gpios[] __initdata = { + { 171, GPIOF_IN, "rev_id_0" }, + { 172, GPIOF_IN, "rev_id_1" }, + { 173, GPIOF_IN, "rev_id_2" }, +}; + static void __init omap3_beagle_init_rev(void) { int ret; @@ -88,21 +95,13 @@ static void __init omap3_beagle_init_rev(void) omap_mux_init_gpio(172, OMAP_PIN_INPUT_PULLUP); omap_mux_init_gpio(173, OMAP_PIN_INPUT_PULLUP); - ret = gpio_request(171, "rev_id_0"); - if (ret < 0) - goto fail0; - - ret = gpio_request(172, "rev_id_1"); - if (ret < 0) - goto fail1; - - ret = gpio_request(173, "rev_id_2"); - if (ret < 0) - goto fail2; - - gpio_direction_input(171); - gpio_direction_input(172); - gpio_direction_input(173); + ret = gpio_request_array(omap3_beagle_rev_gpios, + ARRAY_SIZE(omap3_beagle_rev_gpios)); + if (ret < 0) { + printk(KERN_ERR "Unable to get revision detection GPIO pins\n"); + omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN; + return; + } beagle_rev = gpio_get_value(171) | (gpio_get_value(172) << 1) | (gpio_get_value(173) << 2); @@ -128,18 +127,6 @@ static void __init omap3_beagle_init_rev(void) printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev); omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN; } - - return; - -fail2: - gpio_free(172); -fail1: - gpio_free(171); -fail0: - printk(KERN_ERR "Unable to get revision detection GPIO pins\n"); - omap3_beagle_version = OMAP3BEAGLE_BOARD_UNKN; - - return; } static struct mtd_partition omap3beagle_nand_partitions[] = { @@ -173,15 +160,6 @@ static struct mtd_partition omap3beagle_nand_partitions[] = { }, }; -static struct omap_nand_platform_data omap3beagle_nand_data = { - .options = NAND_BUSWIDTH_16, - .parts = omap3beagle_nand_partitions, - .nr_parts = ARRAY_SIZE(omap3beagle_nand_partitions), - .dma_channel = -1, /* disable DMA in OMAP NAND driver */ - .nand_setup = NULL, - .dev_ready = NULL, -}; - /* DSS */ static int beagle_enable_dvi(struct omap_dss_device *dssdev) @@ -243,13 +221,10 @@ static void __init beagle_display_init(void) { int r; - r = gpio_request(beagle_dvi_device.reset_gpio, "DVI reset"); - if (r < 0) { + r = gpio_request_one(beagle_dvi_device.reset_gpio, GPIOF_OUT_INIT_LOW, + "DVI reset"); + if (r < 0) printk(KERN_ERR "Unable to get DVI reset GPIO\n"); - return; - } - - gpio_direction_output(beagle_dvi_device.reset_gpio, 0); } #include "sdram-micron-mt46h32m32lf-6.h" @@ -276,7 +251,7 @@ static struct gpio_led gpio_leds[]; static int beagle_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - int r; + int r, usb_pwr_level; if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) { mmc[0].gpio_wp = -EINVAL; @@ -295,66 +270,46 @@ static int beagle_twl_gpio_setup(struct device *dev, beagle_vmmc1_supply.dev = mmc[0].dev; beagle_vsim_supply.dev = mmc[0].dev; - /* REVISIT: need ehci-omap hooks for external VBUS - * power switch and overcurrent detect - */ - if (omap3_beagle_get_rev() != OMAP3BEAGLE_BOARD_XM) { - r = gpio_request(gpio + 1, "EHCI_nOC"); - if (!r) { - r = gpio_direction_input(gpio + 1); - if (r) - gpio_free(gpio + 1); - } - if (r) - pr_err("%s: unable to configure EHCI_nOC\n", __func__); - } - /* * TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active * high / others active low) - */ - gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR"); - if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 1); - else - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); - - /* DVI reset GPIO is different between beagle revisions */ - if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) - beagle_dvi_device.reset_gpio = 129; - else - beagle_dvi_device.reset_gpio = 170; - - /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ - gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; - - /* - * gpio + 1 on Xm controls the TFP410's enable line (active low) - * gpio + 2 control varies depending on the board rev as follows: - * P7/P8 revisions(prototype): Camera EN - * A2+ revisions (production): LDO (supplies DVI, serial, led blocks) + * DVI reset GPIO is different between beagle revisions */ if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) { - r = gpio_request(gpio + 1, "nDVI_PWR_EN"); - if (!r) { - r = gpio_direction_output(gpio + 1, 0); - if (r) - gpio_free(gpio + 1); - } + usb_pwr_level = GPIOF_OUT_INIT_HIGH; + beagle_dvi_device.reset_gpio = 129; + /* + * gpio + 1 on Xm controls the TFP410's enable line (active low) + * gpio + 2 control varies depending on the board rev as below: + * P7/P8 revisions(prototype): Camera EN + * A2+ revisions (production): LDO (DVI, serial, led blocks) + */ + r = gpio_request_one(gpio + 1, GPIOF_OUT_INIT_LOW, + "nDVI_PWR_EN"); if (r) pr_err("%s: unable to configure nDVI_PWR_EN\n", __func__); - r = gpio_request(gpio + 2, "DVI_LDO_EN"); - if (!r) { - r = gpio_direction_output(gpio + 2, 1); - if (r) - gpio_free(gpio + 2); - } + r = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH, + "DVI_LDO_EN"); if (r) pr_err("%s: unable to configure DVI_LDO_EN\n", __func__); + } else { + usb_pwr_level = GPIOF_OUT_INIT_LOW; + beagle_dvi_device.reset_gpio = 170; + /* + * REVISIT: need ehci-omap hooks for external VBUS + * power switch and overcurrent detect + */ + if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC")) + pr_err("%s: unable to configure EHCI_nOC\n", __func__); } + gpio_request_one(gpio + TWL4030_GPIO_MAX, usb_pwr_level, "nEN_USB_PWR"); + + /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ + gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; + return 0; } @@ -453,15 +408,6 @@ static struct twl4030_platform_data beagle_twldata = { .vpll2 = &beagle_vpll2, }; -static struct i2c_board_info __initdata beagle_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &beagle_twldata, - }, -}; - static struct i2c_board_info __initdata beagle_i2c_eeprom[] = { { I2C_BOARD_INFO("eeprom", 0x50), @@ -470,8 +416,7 @@ static struct i2c_board_info __initdata beagle_i2c_eeprom[] = { static int __init omap3_beagle_i2c_init(void) { - omap_register_i2c_bus(1, 2600, beagle_i2c_boardinfo, - ARRAY_SIZE(beagle_i2c_boardinfo)); + omap3_pmic_init("twl4030", &beagle_twldata); /* Bus 3 is attached to the DVI port where devices like the pico DLP * projector don't work reliably with 400kHz */ omap_register_i2c_bus(3, 100, beagle_i2c_eeprom, ARRAY_SIZE(beagle_i2c_eeprom)); @@ -551,39 +496,6 @@ static struct platform_device *omap3_beagle_devices[] __initdata = { &keys_gpio, }; -static void __init omap3beagle_flash_init(void) -{ - u8 cs = 0; - u8 nandcs = GPMC_CS_NUM + 1; - - /* find out the chip-select on which NAND exists */ - while (cs < GPMC_CS_NUM) { - u32 ret = 0; - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - - if ((ret & 0xC00) == 0x800) { - printk(KERN_INFO "Found NAND on CS%d\n", cs); - if (nandcs > GPMC_CS_NUM) - nandcs = cs; - } - cs++; - } - - if (nandcs > GPMC_CS_NUM) { - printk(KERN_INFO "NAND: Unable to find configuration " - "in GPMC\n "); - return; - } - - if (nandcs < GPMC_CS_NUM) { - omap3beagle_nand_data.cs = nandcs; - - printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); - if (gpmc_nand_init(&omap3beagle_nand_data) < 0) - printk(KERN_ERR "Unable to register NAND device\n"); - } -} - static const struct usbhs_omap_board_data usbhs_bdata __initconst = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, @@ -602,12 +514,6 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static void __init beagle_opp_init(void) { int r = 0; @@ -665,13 +571,13 @@ static void __init omap3_beagle_init(void) omap_serial_init(); omap_mux_init_gpio(170, OMAP_PIN_INPUT); - gpio_request(170, "DVI_nPD"); /* REVISIT leave DVI powered down until it's needed ... */ - gpio_direction_output(170, true); + gpio_request_one(170, GPIOF_OUT_INIT_HIGH, "DVI_nPD"); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); usbhs_init(&usbhs_bdata); - omap3beagle_flash_init(); + omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions, + ARRAY_SIZE(omap3beagle_nand_partitions)); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 7f94ccc..b4d4346 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -50,6 +50,7 @@ #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "hsmmc.h" +#include "common-board-devices.h" #define OMAP3_EVM_TS_GPIO 175 #define OMAP3_EVM_EHCI_VBUS 22 @@ -101,49 +102,20 @@ static void __init omap3_evm_get_revision(void) } #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) -static struct resource omap3evm_smsc911x_resources[] = { - [0] = { - .start = OMAP3EVM_ETHR_START, - .end = (OMAP3EVM_ETHR_START + OMAP3EVM_ETHR_SIZE - 1), - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ), - .end = OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ), - .flags = (IORESOURCE_IRQ | IRQF_TRIGGER_LOW), - }, -}; +#include <plat/gpmc-smsc911x.h> -static struct smsc911x_platform_config smsc911x_config = { - .phy_interface = PHY_INTERFACE_MODE_MII, - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, - .flags = (SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS), -}; - -static struct platform_device omap3evm_smsc911x_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(omap3evm_smsc911x_resources), - .resource = &omap3evm_smsc911x_resources[0], - .dev = { - .platform_data = &smsc911x_config, - }, +static struct omap_smsc911x_platform_data smsc911x_cfg = { + .cs = OMAP3EVM_SMSC911X_CS, + .gpio_irq = OMAP3EVM_ETHR_GPIO_IRQ, + .gpio_reset = -EINVAL, + .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, }; static inline void __init omap3evm_init_smsc911x(void) { - int eth_cs, eth_rst; struct clk *l3ck; unsigned int rate; - if (get_omap3_evm_rev() == OMAP3EVM_BOARD_GEN_1) - eth_rst = OMAP3EVM_GEN1_ETHR_GPIO_RST; - else - eth_rst = OMAP3EVM_GEN2_ETHR_GPIO_RST; - - eth_cs = OMAP3EVM_SMSC911X_CS; - l3ck = clk_get(NULL, "l3_ck"); if (IS_ERR(l3ck)) rate = 100000000; @@ -152,33 +124,13 @@ static inline void __init omap3evm_init_smsc911x(void) /* Configure ethernet controller reset gpio */ if (cpu_is_omap3430()) { - if (gpio_request(eth_rst, "SMSC911x gpio") < 0) { - pr_err(KERN_ERR "Failed to request %d for smsc911x\n", - eth_rst); - return; - } - - if (gpio_direction_output(eth_rst, 1) < 0) { - pr_err(KERN_ERR "Failed to set direction of %d for" \ - " smsc911x\n", eth_rst); - return; - } - /* reset pulse to ethernet controller*/ - usleep_range(150, 220); - gpio_set_value(eth_rst, 0); - usleep_range(150, 220); - gpio_set_value(eth_rst, 1); - usleep_range(1, 2); - } - - if (gpio_request(OMAP3EVM_ETHR_GPIO_IRQ, "SMSC911x irq") < 0) { - printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n", - OMAP3EVM_ETHR_GPIO_IRQ); - return; + if (get_omap3_evm_rev() == OMAP3EVM_BOARD_GEN_1) + smsc911x_cfg.gpio_reset = OMAP3EVM_GEN1_ETHR_GPIO_RST; + else + smsc911x_cfg.gpio_reset = OMAP3EVM_GEN2_ETHR_GPIO_RST; } - gpio_direction_input(OMAP3EVM_ETHR_GPIO_IRQ); - platform_device_register(&omap3evm_smsc911x_device); + gpmc_smsc911x_init(&smsc911x_cfg); } #else @@ -197,6 +149,15 @@ static inline void __init omap3evm_init_smsc911x(void) { return; } #define OMAP3EVM_LCD_PANEL_BKLIGHT_GPIO 210 #define OMAP3EVM_DVI_PANEL_EN_GPIO 199 +static struct gpio omap3_evm_dss_gpios[] __initdata = { + { OMAP3EVM_LCD_PANEL_RESB, GPIOF_OUT_INIT_HIGH, "lcd_panel_resb" }, + { OMAP3EVM_LCD_PANEL_INI, GPIOF_OUT_INIT_HIGH, "lcd_panel_ini" }, + { OMAP3EVM_LCD_PANEL_QVGA, GPIOF_OUT_INIT_LOW, "lcd_panel_qvga" }, + { OMAP3EVM_LCD_PANEL_LR, GPIOF_OUT_INIT_HIGH, "lcd_panel_lr" }, + { OMAP3EVM_LCD_PANEL_UD, GPIOF_OUT_INIT_HIGH, "lcd_panel_ud" }, + { OMAP3EVM_LCD_PANEL_ENVDD, GPIOF_OUT_INIT_LOW, "lcd_panel_envdd" }, +}; + static int lcd_enabled; static int dvi_enabled; @@ -204,61 +165,10 @@ static void __init omap3_evm_display_init(void) { int r; - r = gpio_request(OMAP3EVM_LCD_PANEL_RESB, "lcd_panel_resb"); - if (r) { - printk(KERN_ERR "failed to get lcd_panel_resb\n"); - return; - } - gpio_direction_output(OMAP3EVM_LCD_PANEL_RESB, 1); - - r = gpio_request(OMAP3EVM_LCD_PANEL_INI, "lcd_panel_ini"); - if (r) { - printk(KERN_ERR "failed to get lcd_panel_ini\n"); - goto err_1; - } - gpio_direction_output(OMAP3EVM_LCD_PANEL_INI, 1); - - r = gpio_request(OMAP3EVM_LCD_PANEL_QVGA, "lcd_panel_qvga"); - if (r) { - printk(KERN_ERR "failed to get lcd_panel_qvga\n"); - goto err_2; - } - gpio_direction_output(OMAP3EVM_LCD_PANEL_QVGA, 0); - - r = gpio_request(OMAP3EVM_LCD_PANEL_LR, "lcd_panel_lr"); - if (r) { - printk(KERN_ERR "failed to get lcd_panel_lr\n"); - goto err_3; - } - gpio_direction_output(OMAP3EVM_LCD_PANEL_LR, 1); - - r = gpio_request(OMAP3EVM_LCD_PANEL_UD, "lcd_panel_ud"); - if (r) { - printk(KERN_ERR "failed to get lcd_panel_ud\n"); - goto err_4; - } - gpio_direction_output(OMAP3EVM_LCD_PANEL_UD, 1); - - r = gpio_request(OMAP3EVM_LCD_PANEL_ENVDD, "lcd_panel_envdd"); - if (r) { - printk(KERN_ERR "failed to get lcd_panel_envdd\n"); - goto err_5; - } - gpio_direction_output(OMAP3EVM_LCD_PANEL_ENVDD, 0); - - return; - -err_5: - gpio_free(OMAP3EVM_LCD_PANEL_UD); -err_4: - gpio_free(OMAP3EVM_LCD_PANEL_LR); -err_3: - gpio_free(OMAP3EVM_LCD_PANEL_QVGA); -err_2: - gpio_free(OMAP3EVM_LCD_PANEL_INI); -err_1: - gpio_free(OMAP3EVM_LCD_PANEL_RESB); - + r = gpio_request_array(omap3_evm_dss_gpios, + ARRAY_SIZE(omap3_evm_dss_gpios)); + if (r) + printk(KERN_ERR "failed to get lcd_panel_* gpios\n"); } static int omap3_evm_enable_lcd(struct omap_dss_device *dssdev) @@ -448,7 +358,7 @@ static struct platform_device leds_gpio = { static int omap3evm_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - int r; + int r, lcd_bl_en; /* gpio + 0 is "mmc0_cd" (input/IRQ) */ omap_mux_init_gpio(63, OMAP_PIN_INPUT); @@ -465,16 +375,14 @@ static int omap3evm_twl_gpio_setup(struct device *dev, */ /* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */ - r = gpio_request(gpio + TWL4030_GPIO_MAX, "EN_LCD_BKL"); - if (!r) - r = gpio_direction_output(gpio + TWL4030_GPIO_MAX, - (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) ? 1 : 0); + lcd_bl_en = get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2 ? + GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; + r = gpio_request_one(gpio + TWL4030_GPIO_MAX, lcd_bl_en, "EN_LCD_BKL"); if (r) printk(KERN_ERR "failed to get/set lcd_bkl gpio\n"); /* gpio + 7 == DVI Enable */ - gpio_request(gpio + 7, "EN_DVI"); - gpio_direction_output(gpio + 7, 0); + gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI"); /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; @@ -652,78 +560,18 @@ static struct twl4030_platform_data omap3evm_twldata = { .vdac = &omap3_evm_vdac, .vpll2 = &omap3_evm_vpll2, .vio = &omap3evm_vio, -}; - -static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &omap3evm_twldata, - }, + .vmmc1 = &omap3evm_vmmc1, + .vsim = &omap3evm_vsim, }; static int __init omap3_evm_i2c_init(void) { - /* - * REVISIT: These entries can be set in omap3evm_twl_data - * after a merge with MFD tree - */ - omap3evm_twldata.vmmc1 = &omap3evm_vmmc1; - omap3evm_twldata.vsim = &omap3evm_vsim; - - omap_register_i2c_bus(1, 2600, omap3evm_i2c_boardinfo, - ARRAY_SIZE(omap3evm_i2c_boardinfo)); + omap3_pmic_init("twl4030", &omap3evm_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); return 0; } -static void ads7846_dev_init(void) -{ - if (gpio_request(OMAP3_EVM_TS_GPIO, "ADS7846 pendown") < 0) - printk(KERN_ERR "can't get ads7846 pen down GPIO\n"); - - gpio_direction_input(OMAP3_EVM_TS_GPIO); - gpio_set_debounce(OMAP3_EVM_TS_GPIO, 310); -} - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(OMAP3_EVM_TS_GPIO); -} - -static struct ads7846_platform_data ads7846_config = { - .x_max = 0x0fff, - .y_max = 0x0fff, - .x_plate_ohms = 180, - .pressure_max = 255, - .debounce_max = 10, - .debounce_tol = 3, - .debounce_rep = 1, - .get_pendown_state = ads7846_get_pendown_state, - .keep_vref_on = 1, - .settle_delay_usecs = 150, - .wakeup = true, -}; - -static struct omap2_mcspi_device_config ads7846_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static struct spi_board_info omap3evm_spi_board_info[] = { - [0] = { - .modalias = "ads7846", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, - .irq = OMAP_GPIO_IRQ(OMAP3_EVM_TS_GPIO), - .platform_data = &ads7846_config, - }, -}; - static struct omap_board_config_kernel omap3_evm_config[] __initdata = { }; @@ -825,6 +673,11 @@ static struct omap_musb_board_data musb_board_data = { .power = 100, }; +static struct gpio omap3_evm_ehci_gpios[] __initdata = { + { OMAP3_EVM_EHCI_VBUS, GPIOF_OUT_INIT_HIGH, "enable EHCI VBUS" }, + { OMAP3_EVM_EHCI_SELECT, GPIOF_OUT_INIT_LOW, "select EHCI port" }, +}; + static void __init omap3_evm_init(void) { omap3_evm_get_revision(); @@ -841,9 +694,6 @@ static void __init omap3_evm_init(void) omap_display_init(&omap3_evm_dss_data); - spi_register_board_info(omap3evm_spi_board_info, - ARRAY_SIZE(omap3evm_spi_board_info)); - omap_serial_init(); /* OMAP3EVM uses ISP1504 phy and so register nop transceiver */ @@ -851,16 +701,12 @@ static void __init omap3_evm_init(void) if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) { /* enable EHCI VBUS using GPIO22 */ - omap_mux_init_gpio(22, OMAP_PIN_INPUT_PULLUP); - gpio_request(OMAP3_EVM_EHCI_VBUS, "enable EHCI VBUS"); - gpio_direction_output(OMAP3_EVM_EHCI_VBUS, 0); - gpio_set_value(OMAP3_EVM_EHCI_VBUS, 1); - + omap_mux_init_gpio(OMAP3_EVM_EHCI_VBUS, OMAP_PIN_INPUT_PULLUP); /* Select EHCI port on main board */ - omap_mux_init_gpio(61, OMAP_PIN_INPUT_PULLUP); - gpio_request(OMAP3_EVM_EHCI_SELECT, "select EHCI port"); - gpio_direction_output(OMAP3_EVM_EHCI_SELECT, 0); - gpio_set_value(OMAP3_EVM_EHCI_SELECT, 0); + omap_mux_init_gpio(OMAP3_EVM_EHCI_SELECT, + OMAP_PIN_INPUT_PULLUP); + gpio_request_array(omap3_evm_ehci_gpios, + ARRAY_SIZE(omap3_evm_ehci_gpios)); /* setup EHCI phy reset config */ omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP); @@ -876,7 +722,7 @@ static void __init omap3_evm_init(void) } usb_musb_init(&musb_board_data); usbhs_init(&usbhs_bdata); - ads7846_dev_init(); + omap_ads7846_init(1, OMAP3_EVM_TS_GPIO, 310, NULL); omap3evm_init_smsc911x(); omap3_evm_display_init(); diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index b726943..60d9be4 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -37,6 +37,7 @@ #include "hsmmc.h" #include "timer-gp.h" #include "control.h" +#include "common-board-devices.h" #include <plat/mux.h> #include <plat/board.h> @@ -93,19 +94,9 @@ static struct twl4030_platform_data omap3logic_twldata = { .vmmc1 = &omap3logic_vmmc1, }; -static struct i2c_board_info __initdata omap3logic_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &omap3logic_twldata, - }, -}; - static int __init omap3logic_i2c_init(void) { - omap_register_i2c_bus(1, 2600, omap3logic_i2c_boardinfo, - ARRAY_SIZE(omap3logic_i2c_boardinfo)); + omap3_pmic_init("twl4030", &omap3logic_twldata); return 0; } @@ -147,7 +138,6 @@ static struct omap_smsc911x_platform_data __initdata board_smsc911x_data = { .cs = OMAP3LOGIC_SMSC911X_CS, .gpio_irq = -EINVAL, .gpio_reset = -EINVAL, - .flags = IORESOURCE_IRQ_LOWLEVEL, }; /* TODO/FIXME (comment by Peter Barada, LogicPD): diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 1db1549..1d10736 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -22,7 +22,6 @@ #include <linux/platform_device.h> #include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> #include <linux/regulator/machine.h> #include <linux/i2c/twl.h> #include <linux/wl12xx.h> @@ -52,6 +51,7 @@ #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "hsmmc.h" +#include "common-board-devices.h" #define PANDORA_WIFI_IRQ_GPIO 21 #define PANDORA_WIFI_NRESET_GPIO 23 @@ -305,24 +305,13 @@ static int omap3pandora_twl_gpio_setup(struct device *dev, /* gpio + 13 drives 32kHz buffer for wifi module */ gpio_32khz = gpio + 13; - ret = gpio_request(gpio_32khz, "wifi 32kHz"); + ret = gpio_request_one(gpio_32khz, GPIOF_OUT_INIT_HIGH, "wifi 32kHz"); if (ret < 0) { pr_err("Cannot get GPIO line %d, ret=%d\n", gpio_32khz, ret); - goto fail; - } - - ret = gpio_direction_output(gpio_32khz, 1); - if (ret < 0) { - pr_err("Cannot set GPIO line %d, ret=%d\n", gpio_32khz, ret); - goto fail_direction; + return -ENODEV; } return 0; - -fail_direction: - gpio_free(gpio_32khz); -fail: - return -ENODEV; } static struct twl4030_gpio_platform_data omap3pandora_gpio_data = { @@ -544,15 +533,6 @@ static struct twl4030_platform_data omap3pandora_twldata = { .bci = &pandora_bci_data, }; -static struct i2c_board_info __initdata omap3pandora_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("tps65950", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &omap3pandora_twldata, - }, -}; - static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = { { I2C_BOARD_INFO("bq27500", 0x55), @@ -562,61 +542,15 @@ static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = { static int __init omap3pandora_i2c_init(void) { - omap_register_i2c_bus(1, 2600, omap3pandora_i2c_boardinfo, - ARRAY_SIZE(omap3pandora_i2c_boardinfo)); + omap3_pmic_init("tps65950", &omap3pandora_twldata); /* i2c2 pins are not connected */ omap_register_i2c_bus(3, 100, omap3pandora_i2c3_boardinfo, ARRAY_SIZE(omap3pandora_i2c3_boardinfo)); return 0; } -static void __init omap3pandora_ads7846_init(void) -{ - int gpio = OMAP3_PANDORA_TS_GPIO; - int ret; - - ret = gpio_request(gpio, "ads7846_pen_down"); - if (ret < 0) { - printk(KERN_ERR "Failed to request GPIO %d for " - "ads7846 pen down IRQ\n", gpio); - return; - } - - gpio_direction_input(gpio); -} - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(OMAP3_PANDORA_TS_GPIO); -} - -static struct ads7846_platform_data ads7846_config = { - .x_max = 0x0fff, - .y_max = 0x0fff, - .x_plate_ohms = 180, - .pressure_max = 255, - .debounce_max = 10, - .debounce_tol = 3, - .debounce_rep = 1, - .get_pendown_state = ads7846_get_pendown_state, - .keep_vref_on = 1, -}; - -static struct omap2_mcspi_device_config ads7846_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - static struct spi_board_info omap3pandora_spi_board_info[] __initdata = { { - .modalias = "ads7846", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, - .irq = OMAP_GPIO_IRQ(OMAP3_PANDORA_TS_GPIO), - .platform_data = &ads7846_config, - }, { .modalias = "tpo_td043mtea1_panel_spi", .bus_num = 1, .chip_select = 1, @@ -639,14 +573,10 @@ static void __init pandora_wl1251_init(void) memset(&pandora_wl1251_pdata, 0, sizeof(pandora_wl1251_pdata)); - ret = gpio_request(PANDORA_WIFI_IRQ_GPIO, "wl1251 irq"); + ret = gpio_request_one(PANDORA_WIFI_IRQ_GPIO, GPIOF_IN, "wl1251 irq"); if (ret < 0) goto fail; - ret = gpio_direction_input(PANDORA_WIFI_IRQ_GPIO); - if (ret < 0) - goto fail_irq; - pandora_wl1251_pdata.irq = gpio_to_irq(PANDORA_WIFI_IRQ_GPIO); if (pandora_wl1251_pdata.irq < 0) goto fail_irq; @@ -688,12 +618,6 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static void __init omap3pandora_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); @@ -705,9 +629,9 @@ static void __init omap3pandora_init(void) omap_serial_init(); spi_register_board_info(omap3pandora_spi_board_info, ARRAY_SIZE(omap3pandora_spi_board_info)); - omap3pandora_ads7846_init(); + omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL); usbhs_init(&usbhs_bdata); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); gpmc_nand_init(&pandora_nand_data); /* Ensure SDRC pins are mux'd for self-refresh */ diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index a72c90a..0c108a2 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -45,7 +45,6 @@ #include <plat/mcspi.h> #include <linux/input/matrix_keypad.h> #include <linux/spi/spi.h> -#include <linux/spi/ads7846.h> #include <linux/interrupt.h> #include <linux/smsc911x.h> #include <linux/i2c/at24.h> @@ -54,52 +53,28 @@ #include "mux.h" #include "hsmmc.h" #include "timer-gp.h" +#include "common-board-devices.h" #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) +#include <plat/gpmc-smsc911x.h> + #define OMAP3STALKER_ETHR_START 0x2c000000 #define OMAP3STALKER_ETHR_SIZE 1024 #define OMAP3STALKER_ETHR_GPIO_IRQ 19 #define OMAP3STALKER_SMC911X_CS 5 -static struct resource omap3stalker_smsc911x_resources[] = { - [0] = { - .start = OMAP3STALKER_ETHR_START, - .end = - (OMAP3STALKER_ETHR_START + OMAP3STALKER_ETHR_SIZE - 1), - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = OMAP_GPIO_IRQ(OMAP3STALKER_ETHR_GPIO_IRQ), - .end = OMAP_GPIO_IRQ(OMAP3STALKER_ETHR_GPIO_IRQ), - .flags = (IORESOURCE_IRQ | IRQF_TRIGGER_LOW), - }, -}; - -static struct smsc911x_platform_config smsc911x_config = { - .phy_interface = PHY_INTERFACE_MODE_MII, - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, +static struct omap_smsc911x_platform_data smsc911x_cfg = { + .cs = OMAP3STALKER_SMC911X_CS, + .gpio_irq = OMAP3STALKER_ETHR_GPIO_IRQ, + .gpio_reset = -EINVAL, .flags = (SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS), }; -static struct platform_device omap3stalker_smsc911x_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(omap3stalker_smsc911x_resources), - .resource = &omap3stalker_smsc911x_resources[0], - .dev = { - .platform_data = &smsc911x_config, - }, -}; - static inline void __init omap3stalker_init_eth(void) { - int eth_cs; struct clk *l3ck; unsigned int rate; - eth_cs = OMAP3STALKER_SMC911X_CS; - l3ck = clk_get(NULL, "l3_ck"); if (IS_ERR(l3ck)) rate = 100000000; @@ -107,16 +82,7 @@ static inline void __init omap3stalker_init_eth(void) rate = clk_get_rate(l3ck); omap_mux_init_gpio(19, OMAP_PIN_INPUT_PULLUP); - if (gpio_request(OMAP3STALKER_ETHR_GPIO_IRQ, "SMC911x irq") < 0) { - printk(KERN_ERR - "Failed to request GPIO%d for smc911x IRQ\n", - OMAP3STALKER_ETHR_GPIO_IRQ); - return; - } - - gpio_direction_input(OMAP3STALKER_ETHR_GPIO_IRQ); - - platform_device_register(&omap3stalker_smsc911x_device); + gpmc_smsc911x_init(&smsc911x_cfg); } #else @@ -365,12 +331,11 @@ omap3stalker_twl_gpio_setup(struct device *dev, */ /* TWL4030_GPIO_MAX + 0 == ledA, LCD Backlight control */ - gpio_request(gpio + TWL4030_GPIO_MAX, "EN_LCD_BKL"); - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); + gpio_request_one(gpio + TWL4030_GPIO_MAX, GPIOF_OUT_INIT_LOW, + "EN_LCD_BKL"); /* gpio + 7 == DVI Enable */ - gpio_request(gpio + 7, "EN_DVI"); - gpio_direction_output(gpio + 7, 0); + gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "EN_DVI"); /* TWL4030_GPIO_MAX + 1 == ledB (out, mmc0) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; @@ -489,15 +454,8 @@ static struct twl4030_platform_data omap3stalker_twldata = { .codec = &omap3stalker_codec_data, .vdac = &omap3_stalker_vdac, .vpll2 = &omap3_stalker_vpll2, -}; - -static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &omap3stalker_twldata, - }, + .vmmc1 = &omap3stalker_vmmc1, + .vsim = &omap3stalker_vsim, }; static struct at24_platform_data fram_info = { @@ -516,15 +474,7 @@ static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo3[] = { static int __init omap3_stalker_i2c_init(void) { - /* - * REVISIT: These entries can be set in omap3evm_twl_data - * after a merge with MFD tree - */ - omap3stalker_twldata.vmmc1 = &omap3stalker_vmmc1; - omap3stalker_twldata.vsim = &omap3stalker_vsim; - - omap_register_i2c_bus(1, 2600, omap3stalker_i2c_boardinfo, - ARRAY_SIZE(omap3stalker_i2c_boardinfo)); + omap3_pmic_init("twl4030", &omap3stalker_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, omap3stalker_i2c_boardinfo3, ARRAY_SIZE(omap3stalker_i2c_boardinfo3)); @@ -532,49 +482,6 @@ static int __init omap3_stalker_i2c_init(void) } #define OMAP3_STALKER_TS_GPIO 175 -static void ads7846_dev_init(void) -{ - if (gpio_request(OMAP3_STALKER_TS_GPIO, "ADS7846 pendown") < 0) - printk(KERN_ERR "can't get ads7846 pen down GPIO\n"); - - gpio_direction_input(OMAP3_STALKER_TS_GPIO); - gpio_set_debounce(OMAP3_STALKER_TS_GPIO, 310); -} - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(OMAP3_STALKER_TS_GPIO); -} - -static struct ads7846_platform_data ads7846_config = { - .x_max = 0x0fff, - .y_max = 0x0fff, - .x_plate_ohms = 180, - .pressure_max = 255, - .debounce_max = 10, - .debounce_tol = 3, - .debounce_rep = 1, - .get_pendown_state = ads7846_get_pendown_state, - .keep_vref_on = 1, - .settle_delay_usecs = 150, -}; - -static struct omap2_mcspi_device_config ads7846_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static struct spi_board_info omap3stalker_spi_board_info[] = { - [0] = { - .modalias = "ads7846", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, - .irq = OMAP_GPIO_IRQ(OMAP3_STALKER_TS_GPIO), - .platform_data = &ads7846_config, - }, -}; static struct omap_board_config_kernel omap3_stalker_config[] __initdata = { }; @@ -618,12 +525,6 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static void __init omap3_stalker_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); @@ -636,13 +537,11 @@ static void __init omap3_stalker_init(void) ARRAY_SIZE(omap3_stalker_devices)); omap_display_init(&omap3_stalker_dss_data); - spi_register_board_info(omap3stalker_spi_board_info, - ARRAY_SIZE(omap3stalker_spi_board_info)); omap_serial_init(); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); usbhs_init(&usbhs_bdata); - ads7846_dev_init(); + omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL); omap_mux_init_gpio(21, OMAP_PIN_OUTPUT); omap_mux_init_gpio(18, OMAP_PIN_INPUT_PULLUP); diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 127cb17..82872d7 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -52,6 +52,7 @@ #include "mux.h" #include "hsmmc.h" #include "timer-gp.h" +#include "common-board-devices.h" #include <asm/setup.h> @@ -95,15 +96,6 @@ static struct mtd_partition omap3touchbook_nand_partitions[] = { }, }; -static struct omap_nand_platform_data omap3touchbook_nand_data = { - .options = NAND_BUSWIDTH_16, - .parts = omap3touchbook_nand_partitions, - .nr_parts = ARRAY_SIZE(omap3touchbook_nand_partitions), - .dma_channel = -1, /* disable DMA in OMAP NAND driver */ - .nand_setup = NULL, - .dev_ready = NULL, -}; - #include "sdram-micron-mt46h32m32lf-6.h" static struct omap2_hsmmc_info mmc[] = { @@ -154,13 +146,11 @@ static int touchbook_twl_gpio_setup(struct device *dev, /* REVISIT: need ehci-omap hooks for external VBUS * power switch and overcurrent detect */ - - gpio_request(gpio + 1, "EHCI_nOC"); - gpio_direction_input(gpio + 1); + gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"); /* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */ - gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR"); - gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0); + gpio_request_one(gpio + TWL4030_GPIO_MAX, GPIOF_OUT_INIT_LOW, + "nEN_USB_PWR"); /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; @@ -273,15 +263,6 @@ static struct twl4030_platform_data touchbook_twldata = { .vpll2 = &touchbook_vpll2, }; -static struct i2c_board_info __initdata touchbook_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl4030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &touchbook_twldata, - }, -}; - static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = { { I2C_BOARD_INFO("bq27200", 0x55), @@ -291,8 +272,7 @@ static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = { static int __init omap3_touchbook_i2c_init(void) { /* Standard TouchBook bus */ - omap_register_i2c_bus(1, 2600, touchbook_i2c_boardinfo, - ARRAY_SIZE(touchbook_i2c_boardinfo)); + omap3_pmic_init("twl4030", &touchbook_twldata); /* Additional TouchBook bus */ omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo, @@ -301,19 +281,7 @@ static int __init omap3_touchbook_i2c_init(void) return 0; } -static void __init omap3_ads7846_init(void) -{ - if (gpio_request(OMAP3_TS_GPIO, "ads7846_pen_down")) { - printk(KERN_ERR "Failed to request GPIO %d for " - "ads7846 pen down IRQ\n", OMAP3_TS_GPIO); - return; - } - - gpio_direction_input(OMAP3_TS_GPIO); - gpio_set_debounce(OMAP3_TS_GPIO, 310); -} - -static struct ads7846_platform_data ads7846_config = { +static struct ads7846_platform_data ads7846_pdata = { .x_min = 100, .y_min = 265, .x_max = 3950, @@ -327,23 +295,6 @@ static struct ads7846_platform_data ads7846_config = { .keep_vref_on = 1, }; -static struct omap2_mcspi_device_config ads7846_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static struct spi_board_info omap3_ads7846_spi_board_info[] __initdata = { - { - .modalias = "ads7846", - .bus_num = 4, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, - .irq = OMAP_GPIO_IRQ(OMAP3_TS_GPIO), - .platform_data = &ads7846_config, - } -}; - static struct gpio_led gpio_leds[] = { { .name = "touchbook::usr0", @@ -434,39 +385,6 @@ static struct platform_device *omap3_touchbook_devices[] __initdata = { &keys_gpio, }; -static void __init omap3touchbook_flash_init(void) -{ - u8 cs = 0; - u8 nandcs = GPMC_CS_NUM + 1; - - /* find out the chip-select on which NAND exists */ - while (cs < GPMC_CS_NUM) { - u32 ret = 0; - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - - if ((ret & 0xC00) == 0x800) { - printk(KERN_INFO "Found NAND on CS%d\n", cs); - if (nandcs > GPMC_CS_NUM) - nandcs = cs; - } - cs++; - } - - if (nandcs > GPMC_CS_NUM) { - printk(KERN_INFO "NAND: Unable to find configuration " - "in GPMC\n "); - return; - } - - if (nandcs < GPMC_CS_NUM) { - omap3touchbook_nand_data.cs = nandcs; - - printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); - if (gpmc_nand_init(&omap3touchbook_nand_data) < 0) - printk(KERN_ERR "Unable to register NAND device\n"); - } -} - static const struct usbhs_omap_board_data usbhs_bdata __initconst = { .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, @@ -481,15 +399,10 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = { static void omap3_touchbook_poweroff(void) { - int r; + int pwr_off = TB_KILL_POWER_GPIO; - r = gpio_request(TB_KILL_POWER_GPIO, "DVI reset"); - if (r < 0) { + if (gpio_request_one(pwr_off, GPIOF_OUT_INIT_LOW, "DVI reset") < 0) printk(KERN_ERR "Unable to get kill power GPIO\n"); - return; - } - - gpio_direction_output(TB_KILL_POWER_GPIO, 0); } static int __init early_touchbook_revision(char *p) @@ -501,12 +414,6 @@ static int __init early_touchbook_revision(char *p) } early_param("tbr", early_touchbook_revision); -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static void __init omap3_touchbook_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); @@ -521,17 +428,15 @@ static void __init omap3_touchbook_init(void) omap_serial_init(); omap_mux_init_gpio(170, OMAP_PIN_INPUT); - gpio_request(176, "DVI_nPD"); /* REVISIT leave DVI powered down until it's needed ... */ - gpio_direction_output(176, true); + gpio_request_one(176, GPIOF_OUT_INIT_HIGH, "DVI_nPD"); /* Touchscreen and accelerometer */ - spi_register_board_info(omap3_ads7846_spi_board_info, - ARRAY_SIZE(omap3_ads7846_spi_board_info)); - omap3_ads7846_init(); - usb_musb_init(&musb_board_data); + omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata); + usb_musb_init(NULL); usbhs_init(&usbhs_bdata); - omap3touchbook_flash_init(); + omap_nand_flash_init(NAND_BUSWIDTH_16, omap3touchbook_nand_partitions, + ARRAY_SIZE(omap3touchbook_nand_partitions)); /* Ensure SDRC pins are mux'd for self-refresh */ omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index e4973ac..90485fc 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -46,6 +46,7 @@ #include "hsmmc.h" #include "control.h" #include "mux.h" +#include "common-board-devices.h" #define GPIO_HUB_POWER 1 #define GPIO_HUB_NRESET 62 @@ -111,6 +112,11 @@ static const struct usbhs_omap_board_data usbhs_bdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +static struct gpio panda_ehci_gpios[] __initdata = { + { GPIO_HUB_POWER, GPIOF_OUT_INIT_LOW, "hub_power" }, + { GPIO_HUB_NRESET, GPIOF_OUT_INIT_LOW, "hub_nreset" }, +}; + static void __init omap4_ehci_init(void) { int ret; @@ -120,44 +126,27 @@ static void __init omap4_ehci_init(void) phy_ref_clk = clk_get(NULL, "auxclk3_ck"); if (IS_ERR(phy_ref_clk)) { pr_err("Cannot request auxclk3\n"); - goto error1; + return; } clk_set_rate(phy_ref_clk, 19200000); clk_enable(phy_ref_clk); - /* disable the power to the usb hub prior to init */ - ret = gpio_request(GPIO_HUB_POWER, "hub_power"); + /* disable the power to the usb hub prior to init and reset phy+hub */ + ret = gpio_request_array(panda_ehci_gpios, + ARRAY_SIZE(panda_ehci_gpios)); if (ret) { - pr_err("Cannot request GPIO %d\n", GPIO_HUB_POWER); - goto error1; + pr_err("Unable to initialize EHCI power/reset\n"); + return; } - gpio_export(GPIO_HUB_POWER, 0); - gpio_direction_output(GPIO_HUB_POWER, 0); - gpio_set_value(GPIO_HUB_POWER, 0); - /* reset phy+hub */ - ret = gpio_request(GPIO_HUB_NRESET, "hub_nreset"); - if (ret) { - pr_err("Cannot request GPIO %d\n", GPIO_HUB_NRESET); - goto error2; - } + gpio_export(GPIO_HUB_POWER, 0); gpio_export(GPIO_HUB_NRESET, 0); - gpio_direction_output(GPIO_HUB_NRESET, 0); - gpio_set_value(GPIO_HUB_NRESET, 0); gpio_set_value(GPIO_HUB_NRESET, 1); usbhs_init(&usbhs_bdata); /* enable power to hub */ gpio_set_value(GPIO_HUB_POWER, 1); - return; - -error2: - gpio_free(GPIO_HUB_POWER); -error1: - pr_err("Unable to initialize EHCI power/reset\n"); - return; - } static struct omap_musb_board_data musb_board_data = { @@ -408,15 +397,6 @@ static struct twl4030_platform_data omap4_panda_twldata = { .usb = &omap4_usbphy_data, }; -static struct i2c_board_info __initdata omap4_panda_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl6030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = OMAP44XX_IRQ_SYS_1N, - .platform_data = &omap4_panda_twldata, - }, -}; - /* * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM * is connected as I2C slave device, and can be accessed at address 0x50 @@ -429,12 +409,7 @@ static struct i2c_board_info __initdata panda_i2c_eeprom[] = { static int __init omap4_panda_i2c_init(void) { - /* - * Phoenix Audio IC needs I2C1 to - * start with 400 KHz or less - */ - omap_register_i2c_bus(1, 400, omap4_panda_i2c_boardinfo, - ARRAY_SIZE(omap4_panda_i2c_boardinfo)); + omap4_pmic_init("twl6030", &omap4_panda_twldata); omap_register_i2c_bus(2, 400, NULL, 0); /* * Bus 3 is attached to the DVI port where devices like the pico DLP @@ -651,27 +626,19 @@ static void omap4_panda_hdmi_mux_init(void) OMAP_PIN_INPUT_PULLUP); } +static struct gpio panda_hdmi_gpios[] = { + { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" }, + { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, +}; + static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev) { int status; - status = gpio_request_one(HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, - "hdmi_gpio_hpd"); - if (status) { - pr_err("Cannot request GPIO %d\n", HDMI_GPIO_HPD); - return status; - } - status = gpio_request_one(HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, - "hdmi_gpio_ls_oe"); - if (status) { - pr_err("Cannot request GPIO %d\n", HDMI_GPIO_LS_OE); - goto error1; - } - - return 0; - -error1: - gpio_free(HDMI_GPIO_HPD); + status = gpio_request_array(panda_hdmi_gpios, + ARRAY_SIZE(panda_hdmi_gpios)); + if (status) + pr_err("Cannot request HDMI GPIOs\n"); return status; } diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 9d192ff..1555918 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -56,6 +56,7 @@ #include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "hsmmc.h" +#include "common-board-devices.h" #define OVERO_GPIO_BT_XGATE 15 #define OVERO_GPIO_W2W_NRESET 16 @@ -74,30 +75,6 @@ #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) -#include <linux/spi/ads7846.h> - -static struct omap2_mcspi_device_config ads7846_mcspi_config = { - .turbo_mode = 0, - .single_channel = 1, /* 0: slave, 1: master */ -}; - -static int ads7846_get_pendown_state(void) -{ - return !gpio_get_value(OVERO_GPIO_PENDOWN); -} - -static struct ads7846_platform_data ads7846_config = { - .x_max = 0x0fff, - .y_max = 0x0fff, - .x_plate_ohms = 180, - .pressure_max = 255, - .debounce_max = 10, - .debounce_tol = 3, - .debounce_rep = 1, - .get_pendown_state = ads7846_get_pendown_state, - .keep_vref_on = 1, -}; - /* fixed regulator for ads7846 */ static struct regulator_consumer_supply ads7846_supply = REGULATOR_SUPPLY("vcc", "spi1.0"); @@ -128,14 +105,7 @@ static struct platform_device vads7846_device = { static void __init overo_ads7846_init(void) { - if ((gpio_request(OVERO_GPIO_PENDOWN, "ADS7846_PENDOWN") == 0) && - (gpio_direction_input(OVERO_GPIO_PENDOWN) == 0)) { - gpio_export(OVERO_GPIO_PENDOWN, 0); - } else { - printk(KERN_ERR "could not obtain gpio for ADS7846_PENDOWN\n"); - return; - } - + omap_ads7846_init(1, OVERO_GPIO_PENDOWN, 0, NULL); platform_device_register(&vads7846_device); } @@ -146,106 +116,28 @@ static inline void __init overo_ads7846_init(void) { return; } #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) #include <linux/smsc911x.h> +#include <plat/gpmc-smsc911x.h> -static struct resource overo_smsc911x_resources[] = { - { - .name = "smsc911x-memory", - .flags = IORESOURCE_MEM, - }, - { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct resource overo_smsc911x2_resources[] = { - { - .name = "smsc911x2-memory", - .flags = IORESOURCE_MEM, - }, - { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct smsc911x_platform_config overo_smsc911x_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, - .flags = SMSC911X_USE_32BIT , - .phy_interface = PHY_INTERFACE_MODE_MII, -}; - -static struct platform_device overo_smsc911x_device = { - .name = "smsc911x", +static struct omap_smsc911x_platform_data smsc911x_cfg = { .id = 0, - .num_resources = ARRAY_SIZE(overo_smsc911x_resources), - .resource = overo_smsc911x_resources, - .dev = { - .platform_data = &overo_smsc911x_config, - }, + .cs = OVERO_SMSC911X_CS, + .gpio_irq = OVERO_SMSC911X_GPIO, + .gpio_reset = -EINVAL, + .flags = SMSC911X_USE_32BIT, }; -static struct platform_device overo_smsc911x2_device = { - .name = "smsc911x", +static struct omap_smsc911x_platform_data smsc911x2_cfg = { .id = 1, - .num_resources = ARRAY_SIZE(overo_smsc911x2_resources), - .resource = overo_smsc911x2_resources, - .dev = { - .platform_data = &overo_smsc911x_config, - }, + .cs = OVERO_SMSC911X2_CS, + .gpio_irq = OVERO_SMSC911X2_GPIO, + .gpio_reset = -EINVAL, + .flags = SMSC911X_USE_32BIT, }; -static struct platform_device *smsc911x_devices[] = { - &overo_smsc911x_device, - &overo_smsc911x2_device, -}; - -static inline void __init overo_init_smsc911x(void) +static void __init overo_init_smsc911x(void) { - unsigned long cs_mem_base, cs_mem_base2; - - /* set up first smsc911x chip */ - - if (gpmc_cs_request(OVERO_SMSC911X_CS, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed request for GPMC mem for smsc911x\n"); - return; - } - - overo_smsc911x_resources[0].start = cs_mem_base + 0x0; - overo_smsc911x_resources[0].end = cs_mem_base + 0xff; - - if ((gpio_request(OVERO_SMSC911X_GPIO, "SMSC911X IRQ") == 0) && - (gpio_direction_input(OVERO_SMSC911X_GPIO) == 0)) { - gpio_export(OVERO_SMSC911X_GPIO, 0); - } else { - printk(KERN_ERR "could not obtain gpio for SMSC911X IRQ\n"); - return; - } - - overo_smsc911x_resources[1].start = OMAP_GPIO_IRQ(OVERO_SMSC911X_GPIO); - overo_smsc911x_resources[1].end = 0; - - /* set up second smsc911x chip */ - - if (gpmc_cs_request(OVERO_SMSC911X2_CS, SZ_16M, &cs_mem_base2) < 0) { - printk(KERN_ERR "Failed request for GPMC mem for smsc911x2\n"); - return; - } - - overo_smsc911x2_resources[0].start = cs_mem_base2 + 0x0; - overo_smsc911x2_resources[0].end = cs_mem_base2 + 0xff; - - if ((gpio_request(OVERO_SMSC911X2_GPIO, "SMSC911X2 IRQ") == 0) && - (gpio_direction_input(OVERO_SMSC911X2_GPIO) == 0)) { - gpio_export(OVERO_SMSC911X2_GPIO, 0); - } else { - printk(KERN_ERR "could not obtain gpio for SMSC911X2 IRQ\n"); - return; - } - - overo_smsc911x2_resources[1].start = OMAP_GPIO_IRQ(OVERO_SMSC911X2_GPIO); - overo_smsc911x2_resources[1].end = 0; - - platform_add_devices(smsc911x_devices, ARRAY_SIZE(smsc911x_devices)); + gpmc_smsc911x_init(&smsc911x_cfg); + gpmc_smsc911x_init(&smsc911x2_cfg); } #else @@ -259,21 +151,20 @@ static int dvi_enabled; #define OVERO_GPIO_LCD_EN 144 #define OVERO_GPIO_LCD_BL 145 +static struct gpio overo_dss_gpios[] __initdata = { + { OVERO_GPIO_LCD_EN, GPIOF_OUT_INIT_HIGH, "OVERO_GPIO_LCD_EN" }, + { OVERO_GPIO_LCD_BL, GPIOF_OUT_INIT_HIGH, "OVERO_GPIO_LCD_BL" }, +}; + static void __init overo_display_init(void) { - if ((gpio_request(OVERO_GPIO_LCD_EN, "OVERO_GPIO_LCD_EN") == 0) && - (gpio_direction_output(OVERO_GPIO_LCD_EN, 1) == 0)) - gpio_export(OVERO_GPIO_LCD_EN, 0); - else - printk(KERN_ERR "could not obtain gpio for " - "OVERO_GPIO_LCD_EN\n"); + if (gpio_request_array(overo_dss_gpios, ARRAY_SIZE(overo_dss_gpios))) { + printk(KERN_ERR "could not obtain DSS control GPIOs\n"); + return; + } - if ((gpio_request(OVERO_GPIO_LCD_BL, "OVERO_GPIO_LCD_BL") == 0) && - (gpio_direction_output(OVERO_GPIO_LCD_BL, 1) == 0)) - gpio_export(OVERO_GPIO_LCD_BL, 0); - else - printk(KERN_ERR "could not obtain gpio for " - "OVERO_GPIO_LCD_BL\n"); + gpio_export(OVERO_GPIO_LCD_EN, 0); + gpio_export(OVERO_GPIO_LCD_BL, 0); } static int overo_panel_enable_dvi(struct omap_dss_device *dssdev) @@ -412,45 +303,6 @@ static struct mtd_partition overo_nand_partitions[] = { }, }; -static struct omap_nand_platform_data overo_nand_data = { - .parts = overo_nand_partitions, - .nr_parts = ARRAY_SIZE(overo_nand_partitions), - .dma_channel = -1, /* disable DMA in OMAP NAND driver */ -}; - -static void __init overo_flash_init(void) -{ - u8 cs = 0; - u8 nandcs = GPMC_CS_NUM + 1; - - /* find out the chip-select on which NAND exists */ - while (cs < GPMC_CS_NUM) { - u32 ret = 0; - ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); - - if ((ret & 0xC00) == 0x800) { - printk(KERN_INFO "Found NAND on CS%d\n", cs); - if (nandcs > GPMC_CS_NUM) - nandcs = cs; - } - cs++; - } - - if (nandcs > GPMC_CS_NUM) { - printk(KERN_INFO "NAND: Unable to find configuration " - "in GPMC\n "); - return; - } - - if (nandcs < GPMC_CS_NUM) { - overo_nand_data.cs = nandcs; - - printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); - if (gpmc_nand_init(&overo_nand_data) < 0) - printk(KERN_ERR "Unable to register NAND device\n"); - } -} - static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, @@ -648,37 +500,15 @@ static struct twl4030_platform_data overo_twldata = { .vpll2 = &overo_vpll2, }; -static struct i2c_board_info __initdata overo_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("tps65950", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &overo_twldata, - }, -}; - static int __init overo_i2c_init(void) { - omap_register_i2c_bus(1, 2600, overo_i2c_boardinfo, - ARRAY_SIZE(overo_i2c_boardinfo)); + omap3_pmic_init("tps65950", &overo_twldata); /* i2c2 pins are used for gpio */ omap_register_i2c_bus(3, 400, NULL, 0); return 0; } static struct spi_board_info overo_spi_board_info[] __initdata = { -#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ - defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) - { - .modalias = "ads7846", - .bus_num = 1, - .chip_select = 0, - .max_speed_hz = 1500000, - .controller_data = &ads7846_mcspi_config, - .irq = OMAP_GPIO_IRQ(OVERO_GPIO_PENDOWN), - .platform_data = &ads7846_config, - }, -#endif #if defined(CONFIG_PANEL_LGPHILIPS_LB035Q02) || \ defined(CONFIG_PANEL_LGPHILIPS_LB035Q02_MODULE) { @@ -722,20 +552,22 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, +static struct gpio overo_bt_gpios[] __initdata = { + { OVERO_GPIO_BT_XGATE, GPIOF_OUT_INIT_LOW, "lcd enable" }, + { OVERO_GPIO_BT_NRESET, GPIOF_OUT_INIT_HIGH, "lcd bl enable" }, }; static void __init overo_init(void) { + int ret; + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); overo_i2c_init(); omap_display_init(&overo_dss_data); omap_serial_init(); - overo_flash_init(); - usb_musb_init(&musb_board_data); + omap_nand_flash_init(0, overo_nand_partitions, + ARRAY_SIZE(overo_nand_partitions)); + usb_musb_init(NULL); usbhs_init(&usbhs_bdata); overo_spi_init(); overo_ads7846_init(); @@ -748,9 +580,9 @@ static void __init overo_init(void) omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT); omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT); - if ((gpio_request(OVERO_GPIO_W2W_NRESET, - "OVERO_GPIO_W2W_NRESET") == 0) && - (gpio_direction_output(OVERO_GPIO_W2W_NRESET, 1) == 0)) { + ret = gpio_request_one(OVERO_GPIO_W2W_NRESET, GPIOF_OUT_INIT_HIGH, + "OVERO_GPIO_W2W_NRESET"); + if (ret == 0) { gpio_export(OVERO_GPIO_W2W_NRESET, 0); gpio_set_value(OVERO_GPIO_W2W_NRESET, 0); udelay(10); @@ -760,25 +592,20 @@ static void __init overo_init(void) "OVERO_GPIO_W2W_NRESET\n"); } - if ((gpio_request(OVERO_GPIO_BT_XGATE, "OVERO_GPIO_BT_XGATE") == 0) && - (gpio_direction_output(OVERO_GPIO_BT_XGATE, 0) == 0)) + ret = gpio_request_array(overo_bt_gpios, ARRAY_SIZE(overo_bt_gpios)); + if (ret) { + pr_err("%s: could not obtain BT gpios\n", __func__); + } else { gpio_export(OVERO_GPIO_BT_XGATE, 0); - else - printk(KERN_ERR "could not obtain gpio for OVERO_GPIO_BT_XGATE\n"); - - if ((gpio_request(OVERO_GPIO_BT_NRESET, "OVERO_GPIO_BT_NRESET") == 0) && - (gpio_direction_output(OVERO_GPIO_BT_NRESET, 1) == 0)) { gpio_export(OVERO_GPIO_BT_NRESET, 0); gpio_set_value(OVERO_GPIO_BT_NRESET, 0); mdelay(6); gpio_set_value(OVERO_GPIO_BT_NRESET, 1); - } else { - printk(KERN_ERR "could not obtain gpio for " - "OVERO_GPIO_BT_NRESET\n"); } - if ((gpio_request(OVERO_GPIO_USBH_CPEN, "OVERO_GPIO_USBH_CPEN") == 0) && - (gpio_direction_output(OVERO_GPIO_USBH_CPEN, 1) == 0)) + ret = gpio_request_one(OVERO_GPIO_USBH_CPEN, GPIOF_OUT_INIT_HIGH, + "OVERO_GPIO_USBH_CPEN"); + if (ret == 0) gpio_export(OVERO_GPIO_USBH_CPEN, 0); else printk(KERN_ERR "could not obtain gpio for " diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index 2af8b05..42d10b1 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -31,6 +31,7 @@ #include "mux.h" #include "hsmmc.h" #include "sdram-nokia.h" +#include "common-board-devices.h" static struct regulator_consumer_supply rm680_vemmc_consumers[] = { REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), @@ -90,19 +91,9 @@ static struct twl4030_platform_data rm680_twl_data = { /* add rest of the children here */ }; -static struct i2c_board_info __initdata rm680_twl_i2c_board_info[] = { - { - I2C_BOARD_INFO("twl5031", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &rm680_twl_data, - }, -}; - static void __init rm680_i2c_init(void) { - omap_register_i2c_bus(1, 2900, rm680_twl_i2c_board_info, - ARRAY_SIZE(rm680_twl_i2c_board_info)); + omap_pmic_init(1, 2900, "twl5031", INT_34XX_SYS_NIRQ, &rm680_twl_data); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); } @@ -153,17 +144,11 @@ static struct omap_board_mux board_mux[] __initdata = { }; #endif -static struct omap_musb_board_data rm680_musb_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_PERIPHERAL, - .power = 100, -}; - static void __init rm680_init(void) { omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_serial_init(); - usb_musb_init(&rm680_musb_data); + usb_musb_init(NULL); rm680_peripherals_init(); } diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index bbcb677..f6247e7 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -23,6 +23,7 @@ #include <linux/gpio.h> #include <linux/gpio_keys.h> #include <linux/mmc/host.h> +#include <linux/power/isp1704_charger.h> #include <plat/mcspi.h> #include <plat/board.h> @@ -43,6 +44,7 @@ #include "mux.h" #include "hsmmc.h" +#include "common-board-devices.h" #define SYSTEM_REV_B_USES_VAUX3 0x1699 #define SYSTEM_REV_S_USES_VAUX3 0x8 @@ -52,6 +54,8 @@ #define RX51_FMTX_RESET_GPIO 163 #define RX51_FMTX_IRQ 53 +#define RX51_USB_TRANSCEIVER_RST_GPIO 67 + /* list all spi devices here */ enum { RX51_SPI_WL1251, @@ -110,10 +114,30 @@ static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = { }, }; +static void rx51_charger_set_power(bool on) +{ + gpio_set_value(RX51_USB_TRANSCEIVER_RST_GPIO, on); +} + +static struct isp1704_charger_data rx51_charger_data = { + .set_power = rx51_charger_set_power, +}; + static struct platform_device rx51_charger_device = { - .name = "isp1704_charger", + .name = "isp1704_charger", + .dev = { + .platform_data = &rx51_charger_data, + }, }; +static void __init rx51_charger_init(void) +{ + WARN_ON(gpio_request_one(RX51_USB_TRANSCEIVER_RST_GPIO, + GPIOF_OUT_INIT_LOW, "isp1704_reset")); + + platform_device_register(&rx51_charger_device); +} + #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #define RX51_GPIO_CAMERA_LENS_COVER 110 @@ -557,10 +581,8 @@ static __init void rx51_init_si4713(void) static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n) { /* FIXME this gpio setup is just a placeholder for now */ - gpio_request(gpio + 6, "backlight_pwm"); - gpio_direction_output(gpio + 6, 0); - gpio_request(gpio + 7, "speaker_en"); - gpio_direction_output(gpio + 7, 1); + gpio_request_one(gpio + 6, GPIOF_OUT_INIT_LOW, "backlight_pwm"); + gpio_request_one(gpio + 7, GPIOF_OUT_INIT_HIGH, "speaker_en"); return 0; } @@ -730,7 +752,7 @@ static struct twl4030_resconfig twl4030_rconfig[] __initdata = { { .resource = RES_RESET, .devgroup = -1, .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 }, - { .resource = RES_Main_Ref, .devgroup = -1, + { .resource = RES_MAIN_REF, .devgroup = -1, .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1 }, { 0, 0}, @@ -777,15 +799,6 @@ static struct tpa6130a2_platform_data rx51_tpa6130a2_data __initdata_or_module = .power_gpio = 98, }; -static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_1[] = { - { - I2C_BOARD_INFO("twl5030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &rx51_twldata, - }, -}; - /* Audio setup data */ static struct aic3x_setup_data rx51_aic34_setup = { .gpio_func[0] = AIC3X_GPIO1_FUNC_DISABLED, @@ -833,8 +846,7 @@ static int __init rx51_i2c_init(void) rx51_twldata.vaux3 = &rx51_vaux3_cam; } rx51_twldata.vmmc2 = &rx51_vmmc2; - omap_register_i2c_bus(1, 2200, rx51_peripherals_i2c_board_info_1, - ARRAY_SIZE(rx51_peripherals_i2c_board_info_1)); + omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata); omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2, ARRAY_SIZE(rx51_peripherals_i2c_board_info_2)); omap_register_i2c_bus(3, 400, NULL, 0); @@ -921,26 +933,20 @@ static void rx51_wl1251_set_power(bool enable) gpio_set_value(RX51_WL1251_POWER_GPIO, enable); } +static struct gpio rx51_wl1251_gpios[] __initdata = { + { RX51_WL1251_POWER_GPIO, GPIOF_OUT_INIT_LOW, "wl1251 power" }, + { RX51_WL1251_IRQ_GPIO, GPIOF_IN, "wl1251 irq" }, +}; + static void __init rx51_init_wl1251(void) { int irq, ret; - ret = gpio_request(RX51_WL1251_POWER_GPIO, "wl1251 power"); + ret = gpio_request_array(rx51_wl1251_gpios, + ARRAY_SIZE(rx51_wl1251_gpios)); if (ret < 0) goto error; - ret = gpio_direction_output(RX51_WL1251_POWER_GPIO, 0); - if (ret < 0) - goto err_power; - - ret = gpio_request(RX51_WL1251_IRQ_GPIO, "wl1251 irq"); - if (ret < 0) - goto err_power; - - ret = gpio_direction_input(RX51_WL1251_IRQ_GPIO); - if (ret < 0) - goto err_irq; - irq = gpio_to_irq(RX51_WL1251_IRQ_GPIO); if (irq < 0) goto err_irq; @@ -952,10 +958,7 @@ static void __init rx51_init_wl1251(void) err_irq: gpio_free(RX51_WL1251_IRQ_GPIO); - -err_power: gpio_free(RX51_WL1251_POWER_GPIO); - error: printk(KERN_ERR "wl1251 board initialisation failed\n"); wl1251_pdata.set_power = NULL; @@ -981,6 +984,6 @@ void __init rx51_peripherals_init(void) if (partition) omap2_hsmmc_init(mmc); - platform_device_register(&rx51_charger_device); + rx51_charger_init(); } diff --git a/arch/arm/mach-omap2/board-rx51-video.c b/arch/arm/mach-omap2/board-rx51-video.c index 2df10b6..2c1289b 100644 --- a/arch/arm/mach-omap2/board-rx51-video.c +++ b/arch/arm/mach-omap2/board-rx51-video.c @@ -76,13 +76,12 @@ static int __init rx51_video_init(void) return 0; } - if (gpio_request(RX51_LCD_RESET_GPIO, "LCD ACX565AKM reset")) { + if (gpio_request_one(RX51_LCD_RESET_GPIO, GPIOF_OUT_INIT_HIGH, + "LCD ACX565AKM reset")) { pr_err("%s failed to get LCD Reset GPIO\n", __func__); return 0; } - gpio_direction_output(RX51_LCD_RESET_GPIO, 1); - omap_display_init(&rx51_dss_board_info); return 0; } diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index f8ba20a..fec4cac 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -58,21 +58,25 @@ static struct platform_device leds_gpio = { }, }; +/* + * cpuidle C-states definition override from the default values. + * The 'exit_latency' field is the sum of sleep and wake-up latencies. + */ static struct cpuidle_params rx51_cpuidle_params[] = { /* C1 */ - {1, 110, 162, 5}, + {110 + 162, 5 , 1}, /* C2 */ - {1, 106, 180, 309}, + {106 + 180, 309, 1}, /* C3 */ - {0, 107, 410, 46057}, + {107 + 410, 46057, 0}, /* C4 */ - {0, 121, 3374, 46057}, + {121 + 3374, 46057, 0}, /* C5 */ - {1, 855, 1146, 46057}, + {855 + 1146, 46057, 1}, /* C6 */ - {0, 7580, 4134, 484329}, + {7580 + 4134, 484329, 0}, /* C7 */ - {1, 7505, 15274, 484329}, + {7505 + 15274, 484329, 1}, }; static struct omap_lcd_config rx51_lcd_config = { diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c index 007ebdc..6402e78 100644 --- a/arch/arm/mach-omap2/board-zoom-debugboard.c +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -15,6 +15,7 @@ #include <linux/interrupt.h> #include <plat/gpmc.h> +#include <plat/gpmc-smsc911x.h> #include <mach/board-zoom.h> @@ -26,60 +27,16 @@ #define DEBUG_BASE 0x08000000 #define ZOOM_ETHR_START DEBUG_BASE -static struct resource zoom_smsc911x_resources[] = { - [0] = { - .start = ZOOM_ETHR_START, - .end = ZOOM_ETHR_START + SZ_4K, - .flags = IORESOURCE_MEM, - }, - [1] = { - .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, - }, -}; - -static struct smsc911x_platform_config zoom_smsc911x_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, +static struct omap_smsc911x_platform_data zoom_smsc911x_cfg = { + .cs = ZOOM_SMSC911X_CS, + .gpio_irq = ZOOM_SMSC911X_GPIO, + .gpio_reset = -EINVAL, .flags = SMSC911X_USE_32BIT, - .phy_interface = PHY_INTERFACE_MODE_MII, -}; - -static struct platform_device zoom_smsc911x_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(zoom_smsc911x_resources), - .resource = zoom_smsc911x_resources, - .dev = { - .platform_data = &zoom_smsc911x_config, - }, }; static inline void __init zoom_init_smsc911x(void) { - int eth_cs; - unsigned long cs_mem_base; - int eth_gpio = 0; - - eth_cs = ZOOM_SMSC911X_CS; - - if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n"); - return; - } - - zoom_smsc911x_resources[0].start = cs_mem_base + 0x0; - zoom_smsc911x_resources[0].end = cs_mem_base + 0xff; - - eth_gpio = ZOOM_SMSC911X_GPIO; - - zoom_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio); - - if (gpio_request(eth_gpio, "smsc911x irq") < 0) { - printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n", - eth_gpio); - return; - } - gpio_direction_input(eth_gpio); + gpmc_smsc911x_init(&zoom_smsc911x_cfg); } static struct plat_serial8250_port serial_platform_data[] = { @@ -120,12 +77,9 @@ static inline void __init zoom_init_quaduart(void) quart_gpio = ZOOM_QUADUART_GPIO; - if (gpio_request(quart_gpio, "TL16CP754C GPIO") < 0) { + if (gpio_request_one(quart_gpio, GPIOF_IN, "TL16CP754C GPIO") < 0) printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n", quart_gpio); - return; - } - gpio_direction_input(quart_gpio); } static inline int omap_zoom_debugboard_detect(void) @@ -135,12 +89,12 @@ static inline int omap_zoom_debugboard_detect(void) debug_board_detect = ZOOM_SMSC911X_GPIO; - if (gpio_request(debug_board_detect, "Zoom debug board detect") < 0) { + if (gpio_request_one(debug_board_detect, GPIOF_IN, + "Zoom debug board detect") < 0) { printk(KERN_ERR "Failed to request GPIO%d for Zoom debug" "board detect\n", debug_board_detect); return 0; } - gpio_direction_input(debug_board_detect); if (!gpio_get_value(debug_board_detect)) { ret = 0; @@ -150,7 +104,6 @@ static inline int omap_zoom_debugboard_detect(void) } static struct platform_device *zoom_devices[] __initdata = { - &zoom_smsc911x_device, &zoom_debugboard_serial_device, }; diff --git a/arch/arm/mach-omap2/board-zoom-display.c b/arch/arm/mach-omap2/board-zoom-display.c index 60e8645..c7c6beb 100644 --- a/arch/arm/mach-omap2/board-zoom-display.c +++ b/arch/arm/mach-omap2/board-zoom-display.c @@ -21,34 +21,19 @@ #define LCD_PANEL_RESET_GPIO_PILOT 55 #define LCD_PANEL_QVGA_GPIO 56 +static struct gpio zoom_lcd_gpios[] __initdata = { + { -EINVAL, GPIOF_OUT_INIT_HIGH, "lcd reset" }, + { LCD_PANEL_QVGA_GPIO, GPIOF_OUT_INIT_HIGH, "lcd qvga" }, +}; + static void zoom_lcd_panel_init(void) { - int ret; - unsigned char lcd_panel_reset_gpio; - - lcd_panel_reset_gpio = (omap_rev() > OMAP3430_REV_ES3_0) ? + zoom_lcd_gpios[0].gpio = (omap_rev() > OMAP3430_REV_ES3_0) ? LCD_PANEL_RESET_GPIO_PROD : LCD_PANEL_RESET_GPIO_PILOT; - ret = gpio_request(lcd_panel_reset_gpio, "lcd reset"); - if (ret) { - pr_err("Failed to get LCD reset GPIO (gpio%d).\n", - lcd_panel_reset_gpio); - return; - } - gpio_direction_output(lcd_panel_reset_gpio, 1); - - ret = gpio_request(LCD_PANEL_QVGA_GPIO, "lcd qvga"); - if (ret) { - pr_err("Failed to get LCD_PANEL_QVGA_GPIO (gpio%d).\n", - LCD_PANEL_QVGA_GPIO); - goto err0; - } - gpio_direction_output(LCD_PANEL_QVGA_GPIO, 1); - - return; -err0: - gpio_free(lcd_panel_reset_gpio); + if (gpio_request_array(zoom_lcd_gpios, ARRAY_SIZE(zoom_lcd_gpios))) + pr_err("%s: Failed to get LCD GPIOs.\n", __func__); } static int zoom_panel_enable_lcd(struct omap_dss_device *dssdev) diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 8dee754..118c6f5 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -31,6 +31,7 @@ #include "mux.h" #include "hsmmc.h" +#include "common-board-devices.h" #define OMAP_ZOOM_WLAN_PMENA_GPIO (101) #define OMAP_ZOOM_WLAN_IRQ_GPIO (162) @@ -276,13 +277,11 @@ static int zoom_twl_gpio_setup(struct device *dev, zoom_vsim_supply.dev = mmc[0].dev; zoom_vmmc2_supply.dev = mmc[1].dev; - ret = gpio_request(LCD_PANEL_ENABLE_GPIO, "lcd enable"); - if (ret) { + ret = gpio_request_one(LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW, + "lcd enable"); + if (ret) pr_err("Failed to get LCD_PANEL_ENABLE_GPIO (gpio%d).\n", LCD_PANEL_ENABLE_GPIO); - return ret; - } - gpio_direction_output(LCD_PANEL_ENABLE_GPIO, 0); return ret; } @@ -349,15 +348,6 @@ static struct twl4030_platform_data zoom_twldata = { .vdac = &zoom_vdac, }; -static struct i2c_board_info __initdata zoom_i2c_boardinfo[] = { - { - I2C_BOARD_INFO("twl5030", 0x48), - .flags = I2C_CLIENT_WAKE, - .irq = INT_34XX_SYS_NIRQ, - .platform_data = &zoom_twldata, - }, -}; - static int __init omap_i2c_init(void) { if (machine_is_omap_zoom2()) { @@ -365,19 +355,12 @@ static int __init omap_i2c_init(void) zoom_audio_data.hs_extmute = 1; zoom_audio_data.set_hs_extmute = zoom2_set_hs_extmute; } - omap_register_i2c_bus(1, 2400, zoom_i2c_boardinfo, - ARRAY_SIZE(zoom_i2c_boardinfo)); + omap_pmic_init(1, 2400, "twl5030", INT_34XX_SYS_NIRQ, &zoom_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); return 0; } -static struct omap_musb_board_data musb_board_data = { - .interface_type = MUSB_INTERFACE_ULPI, - .mode = MUSB_OTG, - .power = 100, -}; - static void enable_board_wakeup_source(void) { /* T2 interrupt line (keypad) */ @@ -392,7 +375,7 @@ void __init zoom_peripherals_init(void) omap_i2c_init(); platform_device_register(&omap_vwlan_device); - usb_musb_init(&musb_board_data); + usb_musb_init(NULL); enable_board_wakeup_source(); omap_serial_init(); } diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c new file mode 100644 index 0000000..e94903b --- /dev/null +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -0,0 +1,163 @@ +/* + * common-board-devices.c + * + * Copyright (C) 2011 CompuLab, Ltd. + * Author: Mike Rapoport <mike@compulab.co.il> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <linux/i2c.h> +#include <linux/i2c/twl.h> + +#include <linux/gpio.h> +#include <linux/spi/spi.h> +#include <linux/spi/ads7846.h> + +#include <plat/i2c.h> +#include <plat/mcspi.h> +#include <plat/nand.h> + +#include "common-board-devices.h" + +static struct i2c_board_info __initdata pmic_i2c_board_info = { + .addr = 0x48, + .flags = I2C_CLIENT_WAKE, +}; + +void __init omap_pmic_init(int bus, u32 clkrate, + const char *pmic_type, int pmic_irq, + struct twl4030_platform_data *pmic_data) +{ + strncpy(pmic_i2c_board_info.type, pmic_type, + sizeof(pmic_i2c_board_info.type)); + pmic_i2c_board_info.irq = pmic_irq; + pmic_i2c_board_info.platform_data = pmic_data; + + omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1); +} + +#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ + defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) +static struct omap2_mcspi_device_config ads7846_mcspi_config = { + .turbo_mode = 0, + .single_channel = 1, /* 0: slave, 1: master */ +}; + +static struct ads7846_platform_data ads7846_config = { + .x_max = 0x0fff, + .y_max = 0x0fff, + .x_plate_ohms = 180, + .pressure_max = 255, + .debounce_max = 10, + .debounce_tol = 3, + .debounce_rep = 1, + .gpio_pendown = -EINVAL, + .keep_vref_on = 1, +}; + +static struct spi_board_info ads7846_spi_board_info __initdata = { + .modalias = "ads7846", + .bus_num = -EINVAL, + .chip_select = 0, + .max_speed_hz = 1500000, + .controller_data = &ads7846_mcspi_config, + .irq = -EINVAL, + .platform_data = &ads7846_config, +}; + +void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, + struct ads7846_platform_data *board_pdata) +{ + struct spi_board_info *spi_bi = &ads7846_spi_board_info; + int err; + + err = gpio_request(gpio_pendown, "TS PenDown"); + if (err) { + pr_err("Could not obtain gpio for TS PenDown: %d\n", err); + return; + } + + gpio_direction_input(gpio_pendown); + gpio_export(gpio_pendown, 0); + + if (gpio_debounce) + gpio_set_debounce(gpio_pendown, gpio_debounce); + + ads7846_config.gpio_pendown = gpio_pendown; + + spi_bi->bus_num = bus_num; + spi_bi->irq = OMAP_GPIO_IRQ(gpio_pendown); + + if (board_pdata) + spi_bi->platform_data = board_pdata; + + spi_register_board_info(&ads7846_spi_board_info, 1); +} +#else +void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, + struct ads7846_platform_data *board_pdata) +{ +} +#endif + +#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE) +static struct omap_nand_platform_data nand_data = { + .dma_channel = -1, /* disable DMA in OMAP NAND driver */ +}; + +void __init omap_nand_flash_init(int options, struct mtd_partition *parts, + int nr_parts) +{ + u8 cs = 0; + u8 nandcs = GPMC_CS_NUM + 1; + + /* find out the chip-select on which NAND exists */ + while (cs < GPMC_CS_NUM) { + u32 ret = 0; + ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); + + if ((ret & 0xC00) == 0x800) { + printk(KERN_INFO "Found NAND on CS%d\n", cs); + if (nandcs > GPMC_CS_NUM) + nandcs = cs; + } + cs++; + } + + if (nandcs > GPMC_CS_NUM) { + printk(KERN_INFO "NAND: Unable to find configuration " + "in GPMC\n "); + return; + } + + if (nandcs < GPMC_CS_NUM) { + nand_data.cs = nandcs; + nand_data.parts = parts; + nand_data.nr_parts = nr_parts; + nand_data.options = options; + + printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); + if (gpmc_nand_init(&nand_data) < 0) + printk(KERN_ERR "Unable to register NAND device\n"); + } +} +#else +void __init omap_nand_flash_init(int options, struct mtd_partition *parts, + int nr_parts) +{ +} +#endif diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h new file mode 100644 index 0000000..eb80b3b --- /dev/null +++ b/arch/arm/mach-omap2/common-board-devices.h @@ -0,0 +1,35 @@ +#ifndef __OMAP_COMMON_BOARD_DEVICES__ +#define __OMAP_COMMON_BOARD_DEVICES__ + +struct twl4030_platform_data; +struct mtd_partition; + +void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, + struct twl4030_platform_data *pmic_data); + +static inline void omap2_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data) +{ + omap_pmic_init(2, 2600, pmic_type, INT_24XX_SYS_NIRQ, pmic_data); +} + +static inline void omap3_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data) +{ + omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data); +} + +static inline void omap4_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data) +{ + /* Phoenix Audio IC needs I2C1 to start with 400 KHz or less */ + omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data); +} + +struct ads7846_platform_data; + +void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, + struct ads7846_platform_data *board_pdata); +void omap_nand_flash_init(int opts, struct mtd_partition *parts, int n_parts); + +#endif /* __OMAP_COMMON_BOARD_DEVICES__ */ diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c index 1c240ef..4bf6e6e 100644 --- a/arch/arm/mach-omap2/cpuidle34xx.c +++ b/arch/arm/mach-omap2/cpuidle34xx.c @@ -36,36 +36,6 @@ #ifdef CONFIG_CPU_IDLE -#define OMAP3_MAX_STATES 7 -#define OMAP3_STATE_C1 0 /* C1 - MPU WFI + Core active */ -#define OMAP3_STATE_C2 1 /* C2 - MPU WFI + Core inactive */ -#define OMAP3_STATE_C3 2 /* C3 - MPU CSWR + Core inactive */ -#define OMAP3_STATE_C4 3 /* C4 - MPU OFF + Core iactive */ -#define OMAP3_STATE_C5 4 /* C5 - MPU RET + Core RET */ -#define OMAP3_STATE_C6 5 /* C6 - MPU OFF + Core RET */ -#define OMAP3_STATE_C7 6 /* C7 - MPU OFF + Core OFF */ - -#define OMAP3_STATE_MAX OMAP3_STATE_C7 - -#define CPUIDLE_FLAG_CHECK_BM 0x10000 /* use omap3_enter_idle_bm() */ - -struct omap3_processor_cx { - u8 valid; - u8 type; - u32 sleep_latency; - u32 wakeup_latency; - u32 mpu_state; - u32 core_state; - u32 threshold; - u32 flags; - const char *desc; -}; - -struct omap3_processor_cx omap3_power_states[OMAP3_MAX_STATES]; -struct omap3_processor_cx current_cx_state; -struct powerdomain *mpu_pd, *core_pd, *per_pd; -struct powerdomain *cam_pd; - /* * The latencies/thresholds for various C states have * to be configured from the respective board files. @@ -75,27 +45,31 @@ struct powerdomain *cam_pd; */ static struct cpuidle_params cpuidle_params_table[] = { /* C1 */ - {1, 2, 2, 5}, + {2 + 2, 5, 1}, /* C2 */ - {1, 10, 10, 30}, + {10 + 10, 30, 1}, /* C3 */ - {1, 50, 50, 300}, + {50 + 50, 300, 1}, /* C4 */ - {1, 1500, 1800, 4000}, + {1500 + 1800, 4000, 1}, /* C5 */ - {1, 2500, 7500, 12000}, + {2500 + 7500, 12000, 1}, /* C6 */ - {1, 3000, 8500, 15000}, + {3000 + 8500, 15000, 1}, /* C7 */ - {1, 10000, 30000, 300000}, + {10000 + 30000, 300000, 1}, }; +#define OMAP3_NUM_STATES ARRAY_SIZE(cpuidle_params_table) -static int omap3_idle_bm_check(void) -{ - if (!omap3_can_sleep()) - return 1; - return 0; -} +/* Mach specific information to be recorded in the C-state driver_data */ +struct omap3_idle_statedata { + u32 mpu_state; + u32 core_state; + u8 valid; +}; +struct omap3_idle_statedata omap3_idle_data[OMAP3_NUM_STATES]; + +struct powerdomain *mpu_pd, *core_pd, *per_pd, *cam_pd; static int _cpuidle_allow_idle(struct powerdomain *pwrdm, struct clockdomain *clkdm) @@ -122,12 +96,10 @@ static int _cpuidle_deny_idle(struct powerdomain *pwrdm, static int omap3_enter_idle(struct cpuidle_device *dev, struct cpuidle_state *state) { - struct omap3_processor_cx *cx = cpuidle_get_statedata(state); + struct omap3_idle_statedata *cx = cpuidle_get_statedata(state); struct timespec ts_preidle, ts_postidle, ts_idle; u32 mpu_state = cx->mpu_state, core_state = cx->core_state; - current_cx_state = *cx; - /* Used to keep track of the total time in idle */ getnstimeofday(&ts_preidle); @@ -140,7 +112,8 @@ static int omap3_enter_idle(struct cpuidle_device *dev, if (omap_irq_pending() || need_resched()) goto return_sleep_time; - if (cx->type == OMAP3_STATE_C1) { + /* Deny idle for C1 */ + if (state == &dev->states[0]) { pwrdm_for_each_clkdm(mpu_pd, _cpuidle_deny_idle); pwrdm_for_each_clkdm(core_pd, _cpuidle_deny_idle); } @@ -148,7 +121,8 @@ static int omap3_enter_idle(struct cpuidle_device *dev, /* Execute ARM wfi */ omap_sram_idle(); - if (cx->type == OMAP3_STATE_C1) { + /* Re-allow idle for C1 */ + if (state == &dev->states[0]) { pwrdm_for_each_clkdm(mpu_pd, _cpuidle_allow_idle); pwrdm_for_each_clkdm(core_pd, _cpuidle_allow_idle); } @@ -164,41 +138,53 @@ return_sleep_time: } /** - * next_valid_state - Find next valid c-state + * next_valid_state - Find next valid C-state * @dev: cpuidle device - * @state: Currently selected c-state + * @state: Currently selected C-state * * If the current state is valid, it is returned back to the caller. * Else, this function searches for a lower c-state which is still - * valid (as defined in omap3_power_states[]). + * valid. + * + * A state is valid if the 'valid' field is enabled and + * if it satisfies the enable_off_mode condition. */ static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev, - struct cpuidle_state *curr) + struct cpuidle_state *curr) { struct cpuidle_state *next = NULL; - struct omap3_processor_cx *cx; + struct omap3_idle_statedata *cx = cpuidle_get_statedata(curr); + u32 mpu_deepest_state = PWRDM_POWER_RET; + u32 core_deepest_state = PWRDM_POWER_RET; - cx = (struct omap3_processor_cx *)cpuidle_get_statedata(curr); + if (enable_off_mode) { + mpu_deepest_state = PWRDM_POWER_OFF; + /* + * Erratum i583: valable for ES rev < Es1.2 on 3630. + * CORE OFF mode is not supported in a stable form, restrict + * instead the CORE state to RET. + */ + if (!IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583)) + core_deepest_state = PWRDM_POWER_OFF; + } /* Check if current state is valid */ - if (cx->valid) { + if ((cx->valid) && + (cx->mpu_state >= mpu_deepest_state) && + (cx->core_state >= core_deepest_state)) { return curr; } else { - u8 idx = OMAP3_STATE_MAX; + int idx = OMAP3_NUM_STATES - 1; - /* - * Reach the current state starting at highest C-state - */ - for (; idx >= OMAP3_STATE_C1; idx--) { + /* Reach the current state starting at highest C-state */ + for (; idx >= 0; idx--) { if (&dev->states[idx] == curr) { next = &dev->states[idx]; break; } } - /* - * Should never hit this condition. - */ + /* Should never hit this condition */ WARN_ON(next == NULL); /* @@ -206,17 +192,17 @@ static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev, * Start search from the next (lower) state. */ idx--; - for (; idx >= OMAP3_STATE_C1; idx--) { - struct omap3_processor_cx *cx; - + for (; idx >= 0; idx--) { cx = cpuidle_get_statedata(&dev->states[idx]); - if (cx->valid) { + if ((cx->valid) && + (cx->mpu_state >= mpu_deepest_state) && + (cx->core_state >= core_deepest_state)) { next = &dev->states[idx]; break; } } /* - * C1 and C2 are always valid. + * C1 is always valid. * So, no need to check for 'next==NULL' outside this loop. */ } @@ -229,36 +215,22 @@ static struct cpuidle_state *next_valid_state(struct cpuidle_device *dev, * @dev: cpuidle device * @state: The target state to be programmed * - * Used for C states with CPUIDLE_FLAG_CHECK_BM flag set. This - * function checks for any pending activity and then programs the - * device to the specified or a safer state. + * This function checks for any pending activity and then programs + * the device to the specified or a safer state. */ static int omap3_enter_idle_bm(struct cpuidle_device *dev, struct cpuidle_state *state) { - struct cpuidle_state *new_state = next_valid_state(dev, state); - u32 core_next_state, per_next_state = 0, per_saved_state = 0; - u32 cam_state; - struct omap3_processor_cx *cx; + struct cpuidle_state *new_state; + u32 core_next_state, per_next_state = 0, per_saved_state = 0, cam_state; + struct omap3_idle_statedata *cx; int ret; - if ((state->flags & CPUIDLE_FLAG_CHECK_BM) && omap3_idle_bm_check()) { - BUG_ON(!dev->safe_state); + if (!omap3_can_sleep()) { new_state = dev->safe_state; goto select_state; } - cx = cpuidle_get_statedata(state); - core_next_state = cx->core_state; - - /* - * FIXME: we currently manage device-specific idle states - * for PER and CORE in combination with CPU-specific - * idle states. This is wrong, and device-specific - * idle management needs to be separated out into - * its own code. - */ - /* * Prevent idle completely if CAM is active. * CAM does not have wakeup capability in OMAP3. @@ -270,9 +242,19 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, } /* + * FIXME: we currently manage device-specific idle states + * for PER and CORE in combination with CPU-specific + * idle states. This is wrong, and device-specific + * idle management needs to be separated out into + * its own code. + */ + + /* * Prevent PER off if CORE is not in retention or off as this * would disable PER wakeups completely. */ + cx = cpuidle_get_statedata(state); + core_next_state = cx->core_state; per_next_state = per_saved_state = pwrdm_read_next_pwrst(per_pd); if ((per_next_state == PWRDM_POWER_OFF) && (core_next_state > PWRDM_POWER_RET)) @@ -282,6 +264,8 @@ static int omap3_enter_idle_bm(struct cpuidle_device *dev, if (per_next_state != per_saved_state) pwrdm_set_next_pwrst(per_pd, per_next_state); + new_state = next_valid_state(dev, state); + select_state: dev->last_state = new_state; ret = omap3_enter_idle(dev, new_state); @@ -295,31 +279,6 @@ select_state: DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev); -/** - * omap3_cpuidle_update_states() - Update the cpuidle states - * @mpu_deepest_state: Enable states up to and including this for mpu domain - * @core_deepest_state: Enable states up to and including this for core domain - * - * This goes through the list of states available and enables and disables the - * validity of C states based on deepest state that can be achieved for the - * variable domain - */ -void omap3_cpuidle_update_states(u32 mpu_deepest_state, u32 core_deepest_state) -{ - int i; - - for (i = OMAP3_STATE_C1; i < OMAP3_MAX_STATES; i++) { - struct omap3_processor_cx *cx = &omap3_power_states[i]; - - if ((cx->mpu_state >= mpu_deepest_state) && - (cx->core_state >= core_deepest_state)) { - cx->valid = 1; - } else { - cx->valid = 0; - } - } -} - void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params) { int i; @@ -327,212 +286,109 @@ void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params) if (!cpuidle_board_params) return; - for (i = OMAP3_STATE_C1; i < OMAP3_MAX_STATES; i++) { - cpuidle_params_table[i].valid = - cpuidle_board_params[i].valid; - cpuidle_params_table[i].sleep_latency = - cpuidle_board_params[i].sleep_latency; - cpuidle_params_table[i].wake_latency = - cpuidle_board_params[i].wake_latency; - cpuidle_params_table[i].threshold = - cpuidle_board_params[i].threshold; + for (i = 0; i < OMAP3_NUM_STATES; i++) { + cpuidle_params_table[i].valid = cpuidle_board_params[i].valid; + cpuidle_params_table[i].exit_latency = + cpuidle_board_params[i].exit_latency; + cpuidle_params_table[i].target_residency = + cpuidle_board_params[i].target_residency; } return; } -/* omap3_init_power_states - Initialises the OMAP3 specific C states. - * - * Below is the desciption of each C state. - * C1 . MPU WFI + Core active - * C2 . MPU WFI + Core inactive - * C3 . MPU CSWR + Core inactive - * C4 . MPU OFF + Core inactive - * C5 . MPU CSWR + Core CSWR - * C6 . MPU OFF + Core CSWR - * C7 . MPU OFF + Core OFF - */ -void omap_init_power_states(void) -{ - /* C1 . MPU WFI + Core active */ - omap3_power_states[OMAP3_STATE_C1].valid = - cpuidle_params_table[OMAP3_STATE_C1].valid; - omap3_power_states[OMAP3_STATE_C1].type = OMAP3_STATE_C1; - omap3_power_states[OMAP3_STATE_C1].sleep_latency = - cpuidle_params_table[OMAP3_STATE_C1].sleep_latency; - omap3_power_states[OMAP3_STATE_C1].wakeup_latency = - cpuidle_params_table[OMAP3_STATE_C1].wake_latency; - omap3_power_states[OMAP3_STATE_C1].threshold = - cpuidle_params_table[OMAP3_STATE_C1].threshold; - omap3_power_states[OMAP3_STATE_C1].mpu_state = PWRDM_POWER_ON; - omap3_power_states[OMAP3_STATE_C1].core_state = PWRDM_POWER_ON; - omap3_power_states[OMAP3_STATE_C1].flags = CPUIDLE_FLAG_TIME_VALID; - omap3_power_states[OMAP3_STATE_C1].desc = "MPU ON + CORE ON"; - - /* C2 . MPU WFI + Core inactive */ - omap3_power_states[OMAP3_STATE_C2].valid = - cpuidle_params_table[OMAP3_STATE_C2].valid; - omap3_power_states[OMAP3_STATE_C2].type = OMAP3_STATE_C2; - omap3_power_states[OMAP3_STATE_C2].sleep_latency = - cpuidle_params_table[OMAP3_STATE_C2].sleep_latency; - omap3_power_states[OMAP3_STATE_C2].wakeup_latency = - cpuidle_params_table[OMAP3_STATE_C2].wake_latency; - omap3_power_states[OMAP3_STATE_C2].threshold = - cpuidle_params_table[OMAP3_STATE_C2].threshold; - omap3_power_states[OMAP3_STATE_C2].mpu_state = PWRDM_POWER_ON; - omap3_power_states[OMAP3_STATE_C2].core_state = PWRDM_POWER_ON; - omap3_power_states[OMAP3_STATE_C2].flags = CPUIDLE_FLAG_TIME_VALID | - CPUIDLE_FLAG_CHECK_BM; - omap3_power_states[OMAP3_STATE_C2].desc = "MPU ON + CORE ON"; - - /* C3 . MPU CSWR + Core inactive */ - omap3_power_states[OMAP3_STATE_C3].valid = - cpuidle_params_table[OMAP3_STATE_C3].valid; - omap3_power_states[OMAP3_STATE_C3].type = OMAP3_STATE_C3; - omap3_power_states[OMAP3_STATE_C3].sleep_latency = - cpuidle_params_table[OMAP3_STATE_C3].sleep_latency; - omap3_power_states[OMAP3_STATE_C3].wakeup_latency = - cpuidle_params_table[OMAP3_STATE_C3].wake_latency; - omap3_power_states[OMAP3_STATE_C3].threshold = - cpuidle_params_table[OMAP3_STATE_C3].threshold; - omap3_power_states[OMAP3_STATE_C3].mpu_state = PWRDM_POWER_RET; - omap3_power_states[OMAP3_STATE_C3].core_state = PWRDM_POWER_ON; - omap3_power_states[OMAP3_STATE_C3].flags = CPUIDLE_FLAG_TIME_VALID | - CPUIDLE_FLAG_CHECK_BM; - omap3_power_states[OMAP3_STATE_C3].desc = "MPU RET + CORE ON"; - - /* C4 . MPU OFF + Core inactive */ - omap3_power_states[OMAP3_STATE_C4].valid = - cpuidle_params_table[OMAP3_STATE_C4].valid; - omap3_power_states[OMAP3_STATE_C4].type = OMAP3_STATE_C4; - omap3_power_states[OMAP3_STATE_C4].sleep_latency = - cpuidle_params_table[OMAP3_STATE_C4].sleep_latency; - omap3_power_states[OMAP3_STATE_C4].wakeup_latency = - cpuidle_params_table[OMAP3_STATE_C4].wake_latency; - omap3_power_states[OMAP3_STATE_C4].threshold = - cpuidle_params_table[OMAP3_STATE_C4].threshold; - omap3_power_states[OMAP3_STATE_C4].mpu_state = PWRDM_POWER_OFF; - omap3_power_states[OMAP3_STATE_C4].core_state = PWRDM_POWER_ON; - omap3_power_states[OMAP3_STATE_C4].flags = CPUIDLE_FLAG_TIME_VALID | - CPUIDLE_FLAG_CHECK_BM; - omap3_power_states[OMAP3_STATE_C4].desc = "MPU OFF + CORE ON"; - - /* C5 . MPU CSWR + Core CSWR*/ - omap3_power_states[OMAP3_STATE_C5].valid = - cpuidle_params_table[OMAP3_STATE_C5].valid; - omap3_power_states[OMAP3_STATE_C5].type = OMAP3_STATE_C5; - omap3_power_states[OMAP3_STATE_C5].sleep_latency = - cpuidle_params_table[OMAP3_STATE_C5].sleep_latency; - omap3_power_states[OMAP3_STATE_C5].wakeup_latency = - cpuidle_params_table[OMAP3_STATE_C5].wake_latency; - omap3_power_states[OMAP3_STATE_C5].threshold = - cpuidle_params_table[OMAP3_STATE_C5].threshold; - omap3_power_states[OMAP3_STATE_C5].mpu_state = PWRDM_POWER_RET; - omap3_power_states[OMAP3_STATE_C5].core_state = PWRDM_POWER_RET; - omap3_power_states[OMAP3_STATE_C5].flags = CPUIDLE_FLAG_TIME_VALID | - CPUIDLE_FLAG_CHECK_BM; - omap3_power_states[OMAP3_STATE_C5].desc = "MPU RET + CORE RET"; - - /* C6 . MPU OFF + Core CSWR */ - omap3_power_states[OMAP3_STATE_C6].valid = - cpuidle_params_table[OMAP3_STATE_C6].valid; - omap3_power_states[OMAP3_STATE_C6].type = OMAP3_STATE_C6; - omap3_power_states[OMAP3_STATE_C6].sleep_latency = - cpuidle_params_table[OMAP3_STATE_C6].sleep_latency; - omap3_power_states[OMAP3_STATE_C6].wakeup_latency = - cpuidle_params_table[OMAP3_STATE_C6].wake_latency; - omap3_power_states[OMAP3_STATE_C6].threshold = - cpuidle_params_table[OMAP3_STATE_C6].threshold; - omap3_power_states[OMAP3_STATE_C6].mpu_state = PWRDM_POWER_OFF; - omap3_power_states[OMAP3_STATE_C6].core_state = PWRDM_POWER_RET; - omap3_power_states[OMAP3_STATE_C6].flags = CPUIDLE_FLAG_TIME_VALID | - CPUIDLE_FLAG_CHECK_BM; - omap3_power_states[OMAP3_STATE_C6].desc = "MPU OFF + CORE RET"; - - /* C7 . MPU OFF + Core OFF */ - omap3_power_states[OMAP3_STATE_C7].valid = - cpuidle_params_table[OMAP3_STATE_C7].valid; - omap3_power_states[OMAP3_STATE_C7].type = OMAP3_STATE_C7; - omap3_power_states[OMAP3_STATE_C7].sleep_latency = - cpuidle_params_table[OMAP3_STATE_C7].sleep_latency; - omap3_power_states[OMAP3_STATE_C7].wakeup_latency = - cpuidle_params_table[OMAP3_STATE_C7].wake_latency; - omap3_power_states[OMAP3_STATE_C7].threshold = - cpuidle_params_table[OMAP3_STATE_C7].threshold; - omap3_power_states[OMAP3_STATE_C7].mpu_state = PWRDM_POWER_OFF; - omap3_power_states[OMAP3_STATE_C7].core_state = PWRDM_POWER_OFF; - omap3_power_states[OMAP3_STATE_C7].flags = CPUIDLE_FLAG_TIME_VALID | - CPUIDLE_FLAG_CHECK_BM; - omap3_power_states[OMAP3_STATE_C7].desc = "MPU OFF + CORE OFF"; - - /* - * Erratum i583: implementation for ES rev < Es1.2 on 3630. We cannot - * enable OFF mode in a stable form for previous revisions. - * we disable C7 state as a result. - */ - if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583)) { - omap3_power_states[OMAP3_STATE_C7].valid = 0; - cpuidle_params_table[OMAP3_STATE_C7].valid = 0; - pr_warn("%s: core off state C7 disabled due to i583\n", - __func__); - } -} - struct cpuidle_driver omap3_idle_driver = { .name = "omap3_idle", .owner = THIS_MODULE, }; +/* Helper to fill the C-state common data and register the driver_data */ +static inline struct omap3_idle_statedata *_fill_cstate( + struct cpuidle_device *dev, + int idx, const char *descr) +{ + struct omap3_idle_statedata *cx = &omap3_idle_data[idx]; + struct cpuidle_state *state = &dev->states[idx]; + + state->exit_latency = cpuidle_params_table[idx].exit_latency; + state->target_residency = cpuidle_params_table[idx].target_residency; + state->flags = CPUIDLE_FLAG_TIME_VALID; + state->enter = omap3_enter_idle_bm; + cx->valid = cpuidle_params_table[idx].valid; + sprintf(state->name, "C%d", idx + 1); + strncpy(state->desc, descr, CPUIDLE_DESC_LEN); + cpuidle_set_statedata(state, cx); + + return cx; +} + /** * omap3_idle_init - Init routine for OMAP3 idle * - * Registers the OMAP3 specific cpuidle driver with the cpuidle + * Registers the OMAP3 specific cpuidle driver to the cpuidle * framework with the valid set of states. */ int __init omap3_idle_init(void) { - int i, count = 0; - struct omap3_processor_cx *cx; - struct cpuidle_state *state; struct cpuidle_device *dev; + struct omap3_idle_statedata *cx; mpu_pd = pwrdm_lookup("mpu_pwrdm"); core_pd = pwrdm_lookup("core_pwrdm"); per_pd = pwrdm_lookup("per_pwrdm"); cam_pd = pwrdm_lookup("cam_pwrdm"); - omap_init_power_states(); cpuidle_register_driver(&omap3_idle_driver); - dev = &per_cpu(omap3_idle_dev, smp_processor_id()); - for (i = OMAP3_STATE_C1; i < OMAP3_MAX_STATES; i++) { - cx = &omap3_power_states[i]; - state = &dev->states[count]; - - if (!cx->valid) - continue; - cpuidle_set_statedata(state, cx); - state->exit_latency = cx->sleep_latency + cx->wakeup_latency; - state->target_residency = cx->threshold; - state->flags = cx->flags; - state->enter = (state->flags & CPUIDLE_FLAG_CHECK_BM) ? - omap3_enter_idle_bm : omap3_enter_idle; - if (cx->type == OMAP3_STATE_C1) - dev->safe_state = state; - sprintf(state->name, "C%d", count+1); - strncpy(state->desc, cx->desc, CPUIDLE_DESC_LEN); - count++; - } + /* C1 . MPU WFI + Core active */ + cx = _fill_cstate(dev, 0, "MPU ON + CORE ON"); + (&dev->states[0])->enter = omap3_enter_idle; + dev->safe_state = &dev->states[0]; + cx->valid = 1; /* C1 is always valid */ + cx->mpu_state = PWRDM_POWER_ON; + cx->core_state = PWRDM_POWER_ON; - if (!count) - return -EINVAL; - dev->state_count = count; + /* C2 . MPU WFI + Core inactive */ + cx = _fill_cstate(dev, 1, "MPU ON + CORE ON"); + cx->mpu_state = PWRDM_POWER_ON; + cx->core_state = PWRDM_POWER_ON; + + /* C3 . MPU CSWR + Core inactive */ + cx = _fill_cstate(dev, 2, "MPU RET + CORE ON"); + cx->mpu_state = PWRDM_POWER_RET; + cx->core_state = PWRDM_POWER_ON; - if (enable_off_mode) - omap3_cpuidle_update_states(PWRDM_POWER_OFF, PWRDM_POWER_OFF); - else - omap3_cpuidle_update_states(PWRDM_POWER_RET, PWRDM_POWER_RET); + /* C4 . MPU OFF + Core inactive */ + cx = _fill_cstate(dev, 3, "MPU OFF + CORE ON"); + cx->mpu_state = PWRDM_POWER_OFF; + cx->core_state = PWRDM_POWER_ON; + + /* C5 . MPU RET + Core RET */ + cx = _fill_cstate(dev, 4, "MPU RET + CORE RET"); + cx->mpu_state = PWRDM_POWER_RET; + cx->core_state = PWRDM_POWER_RET; + + /* C6 . MPU OFF + Core RET */ + cx = _fill_cstate(dev, 5, "MPU OFF + CORE RET"); + cx->mpu_state = PWRDM_POWER_OFF; + cx->core_state = PWRDM_POWER_RET; + + /* C7 . MPU OFF + Core OFF */ + cx = _fill_cstate(dev, 6, "MPU OFF + CORE OFF"); + /* + * Erratum i583: implementation for ES rev < Es1.2 on 3630. We cannot + * enable OFF mode in a stable form for previous revisions. + * We disable C7 state as a result. + */ + if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583)) { + cx->valid = 0; + pr_warn("%s: core off state C7 disabled due to i583\n", + __func__); + } + cx->mpu_state = PWRDM_POWER_OFF; + cx->core_state = PWRDM_POWER_OFF; + dev->state_count = OMAP3_NUM_STATES; if (cpuidle_register_device(dev)) { printk(KERN_ERR "%s: CPUidle register device failed\n", __func__); diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c index 877c6f5..ba10c24 100644 --- a/arch/arm/mach-omap2/gpmc-smc91x.c +++ b/arch/arm/mach-omap2/gpmc-smc91x.c @@ -147,25 +147,24 @@ void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data) goto free1; } - if (gpio_request(gpmc_cfg->gpio_irq, "SMC91X irq") < 0) + if (gpio_request_one(gpmc_cfg->gpio_irq, GPIOF_IN, "SMC91X irq") < 0) goto free1; - gpio_direction_input(gpmc_cfg->gpio_irq); gpmc_smc91x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq); if (gpmc_cfg->gpio_pwrdwn) { - ret = gpio_request(gpmc_cfg->gpio_pwrdwn, "SMC91X powerdown"); + ret = gpio_request_one(gpmc_cfg->gpio_pwrdwn, + GPIOF_OUT_INIT_LOW, "SMC91X powerdown"); if (ret) goto free2; - gpio_direction_output(gpmc_cfg->gpio_pwrdwn, 0); } if (gpmc_cfg->gpio_reset) { - ret = gpio_request(gpmc_cfg->gpio_reset, "SMC91X reset"); + ret = gpio_request_one(gpmc_cfg->gpio_reset, + GPIOF_OUT_INIT_LOW, "SMC91X reset"); if (ret) goto free3; - gpio_direction_output(gpmc_cfg->gpio_reset, 0); gpio_set_value(gpmc_cfg->gpio_reset, 1); msleep(100); gpio_set_value(gpmc_cfg->gpio_reset, 0); diff --git a/arch/arm/mach-omap2/gpmc-smsc911x.c b/arch/arm/mach-omap2/gpmc-smsc911x.c index 703f150..9970331 100644 --- a/arch/arm/mach-omap2/gpmc-smsc911x.c +++ b/arch/arm/mach-omap2/gpmc-smsc911x.c @@ -10,6 +10,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#define pr_fmt(fmt) "%s: " fmt, __func__ #include <linux/kernel.h> #include <linux/platform_device.h> @@ -30,7 +31,7 @@ static struct resource gpmc_smsc911x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, }, }; @@ -41,16 +42,6 @@ static struct smsc911x_platform_config gpmc_smsc911x_config = { .flags = SMSC911X_USE_16BIT, }; -static struct platform_device gpmc_smsc911x_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(gpmc_smsc911x_resources), - .resource = gpmc_smsc911x_resources, - .dev = { - .platform_data = &gpmc_smsc911x_config, - }, -}; - /* * Initialize smsc911x device connected to the GPMC. Note that we * assume that pin multiplexing is done in the board-*.c file, @@ -58,46 +49,49 @@ static struct platform_device gpmc_smsc911x_device = { */ void __init gpmc_smsc911x_init(struct omap_smsc911x_platform_data *board_data) { + struct platform_device *pdev; unsigned long cs_mem_base; int ret; gpmc_cfg = board_data; if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) { - printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n"); + pr_err("Failed to request GPMC mem region\n"); return; } gpmc_smsc911x_resources[0].start = cs_mem_base + 0x0; gpmc_smsc911x_resources[0].end = cs_mem_base + 0xff; - if (gpio_request(gpmc_cfg->gpio_irq, "smsc911x irq") < 0) { - printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n", - gpmc_cfg->gpio_irq); + if (gpio_request_one(gpmc_cfg->gpio_irq, GPIOF_IN, "smsc911x irq")) { + pr_err("Failed to request IRQ GPIO%d\n", gpmc_cfg->gpio_irq); goto free1; } - gpio_direction_input(gpmc_cfg->gpio_irq); gpmc_smsc911x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq); - gpmc_smsc911x_resources[1].flags |= - (gpmc_cfg->flags & IRQF_TRIGGER_MASK); if (gpio_is_valid(gpmc_cfg->gpio_reset)) { - ret = gpio_request(gpmc_cfg->gpio_reset, "smsc911x reset"); + ret = gpio_request_one(gpmc_cfg->gpio_reset, + GPIOF_OUT_INIT_HIGH, "smsc911x reset"); if (ret) { - printk(KERN_ERR "Failed to request GPIO%d for smsc911x reset\n", - gpmc_cfg->gpio_reset); + pr_err("Failed to request reset GPIO%d\n", + gpmc_cfg->gpio_reset); goto free2; } - gpio_direction_output(gpmc_cfg->gpio_reset, 1); gpio_set_value(gpmc_cfg->gpio_reset, 0); msleep(100); gpio_set_value(gpmc_cfg->gpio_reset, 1); } - if (platform_device_register(&gpmc_smsc911x_device) < 0) { - printk(KERN_ERR "Unable to register smsc911x device\n"); + if (gpmc_cfg->flags) + gpmc_smsc911x_config.flags = gpmc_cfg->flags; + + pdev = platform_device_register_resndata(NULL, "smsc911x", gpmc_cfg->id, + gpmc_smsc911x_resources, ARRAY_SIZE(gpmc_smsc911x_resources), + &gpmc_smsc911x_config, sizeof(gpmc_smsc911x_config)); + if (!pdev) { + pr_err("Unable to register platform device\n"); gpio_free(gpmc_cfg->gpio_reset); goto free2; } @@ -109,5 +103,5 @@ free2: free1: gpmc_cs_free(gpmc_cfg->cs); - printk(KERN_ERR "Could not initialize smsc911x\n"); + pr_err("Could not initialize smsc911x device\n"); } diff --git a/arch/arm/mach-omap2/omap_l3_noc.c b/arch/arm/mach-omap2/omap_l3_noc.c index 82632c2..7b9f190 100644 --- a/arch/arm/mach-omap2/omap_l3_noc.c +++ b/arch/arm/mach-omap2/omap_l3_noc.c @@ -63,10 +63,7 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3) char *source_name; /* Get the Type of interrupt */ - if (irq == l3->app_irq) - inttype = L3_APPLICATION_ERROR; - else - inttype = L3_DEBUG_ERROR; + inttype = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR; for (i = 0; i < L3_MODULES; i++) { /* @@ -84,10 +81,10 @@ static irqreturn_t l3_interrupt_handler(int irq, void *_l3) err_src = j; /* Read the stderrlog_main_source from clk domain */ - std_err_main_addr = base + (*(l3_targ[i] + err_src)); - std_err_main = readl(std_err_main_addr); + std_err_main_addr = base + *(l3_targ[i] + err_src); + std_err_main = readl(std_err_main_addr); - switch ((std_err_main & CUSTOM_ERROR)) { + switch (std_err_main & CUSTOM_ERROR) { case STANDARD_ERROR: source_name = l3_targ_stderrlog_main_name[i][err_src]; @@ -132,49 +129,49 @@ static int __init omap4_l3_probe(struct platform_device *pdev) l3 = kzalloc(sizeof(*l3), GFP_KERNEL); if (!l3) - ret = -ENOMEM; + return -ENOMEM; platform_set_drvdata(pdev, l3); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(&pdev->dev, "couldn't find resource 0\n"); ret = -ENODEV; - goto err1; + goto err0; } l3->l3_base[0] = ioremap(res->start, resource_size(res)); - if (!(l3->l3_base[0])) { + if (!l3->l3_base[0]) { dev_err(&pdev->dev, "ioremap failed\n"); ret = -ENOMEM; - goto err2; + goto err0; } res = platform_get_resource(pdev, IORESOURCE_MEM, 1); if (!res) { dev_err(&pdev->dev, "couldn't find resource 1\n"); ret = -ENODEV; - goto err3; + goto err1; } l3->l3_base[1] = ioremap(res->start, resource_size(res)); - if (!(l3->l3_base[1])) { + if (!l3->l3_base[1]) { dev_err(&pdev->dev, "ioremap failed\n"); ret = -ENOMEM; - goto err4; + goto err1; } res = platform_get_resource(pdev, IORESOURCE_MEM, 2); if (!res) { dev_err(&pdev->dev, "couldn't find resource 2\n"); ret = -ENODEV; - goto err5; + goto err2; } l3->l3_base[2] = ioremap(res->start, resource_size(res)); - if (!(l3->l3_base[2])) { + if (!l3->l3_base[2]) { dev_err(&pdev->dev, "ioremap failed\n"); ret = -ENOMEM; - goto err6; + goto err2; } /* @@ -187,7 +184,7 @@ static int __init omap4_l3_probe(struct platform_device *pdev) if (ret) { pr_crit("L3: request_irq failed to register for 0x%x\n", OMAP44XX_IRQ_L3_DBG); - goto err7; + goto err3; } l3->debug_irq = irq; @@ -198,24 +195,22 @@ static int __init omap4_l3_probe(struct platform_device *pdev) if (ret) { pr_crit("L3: request_irq failed to register for 0x%x\n", OMAP44XX_IRQ_L3_APP); - goto err8; + goto err4; } l3->app_irq = irq; - goto err0; -err8: -err7: - iounmap(l3->l3_base[2]); -err6: -err5: - iounmap(l3->l3_base[1]); + return 0; + err4: + free_irq(l3->debug_irq, l3); err3: - iounmap(l3->l3_base[0]); + iounmap(l3->l3_base[2]); err2: + iounmap(l3->l3_base[1]); err1: - kfree(l3); + iounmap(l3->l3_base[0]); err0: + kfree(l3); return ret; } diff --git a/arch/arm/mach-omap2/omap_l3_smx.c b/arch/arm/mach-omap2/omap_l3_smx.c index 4321e79..873c0e3 100644 --- a/arch/arm/mach-omap2/omap_l3_smx.c +++ b/arch/arm/mach-omap2/omap_l3_smx.c @@ -155,7 +155,7 @@ static irqreturn_t omap3_l3_block_irq(struct omap3_l3 *l3, u8 multi = error & L3_ERROR_LOG_MULTI; u32 address = omap3_l3_decode_addr(error_addr); - WARN(true, "%s Error seen by %s %s at address %x\n", + WARN(true, "%s seen by %s %s at address %x\n", omap3_l3_code_string(code), omap3_l3_initiator_string(initid), multi ? "Multiple Errors" : "", @@ -167,21 +167,15 @@ static irqreturn_t omap3_l3_block_irq(struct omap3_l3 *l3, static irqreturn_t omap3_l3_app_irq(int irq, void *_l3) { struct omap3_l3 *l3 = _l3; - u64 status, clear; u64 error; u64 error_addr; u64 err_source = 0; void __iomem *base; int int_type; - irqreturn_t ret = IRQ_NONE; - if (irq == l3->app_irq) - int_type = L3_APPLICATION_ERROR; - else - int_type = L3_DEBUG_ERROR; - + int_type = irq == l3->app_irq ? L3_APPLICATION_ERROR : L3_DEBUG_ERROR; if (!int_type) { status = omap3_l3_readll(l3->rt, L3_SI_FLAG_STATUS_0); /* @@ -202,7 +196,6 @@ static irqreturn_t omap3_l3_app_irq(int irq, void *_l3) base = l3->rt + *(omap3_l3_bases[int_type] + err_source); error = omap3_l3_readll(base, L3_ERROR_LOG); - if (error) { error_addr = omap3_l3_readll(base, L3_ERROR_LOG_ADDR); @@ -210,9 +203,8 @@ static irqreturn_t omap3_l3_app_irq(int irq, void *_l3) } /* Clear the status register */ - clear = ((L3_AGENT_STATUS_CLEAR_IA << int_type) | - (L3_AGENT_STATUS_CLEAR_TA)); - + clear = (L3_AGENT_STATUS_CLEAR_IA << int_type) | + L3_AGENT_STATUS_CLEAR_TA; omap3_l3_writell(base, L3_AGENT_STATUS, clear); /* clear the error log register */ @@ -228,10 +220,8 @@ static int __init omap3_l3_probe(struct platform_device *pdev) int ret; l3 = kzalloc(sizeof(*l3), GFP_KERNEL); - if (!l3) { - ret = -ENOMEM; - goto err0; - } + if (!l3) + return -ENOMEM; platform_set_drvdata(pdev, l3); @@ -239,13 +229,13 @@ static int __init omap3_l3_probe(struct platform_device *pdev) if (!res) { dev_err(&pdev->dev, "couldn't find resource\n"); ret = -ENODEV; - goto err1; + goto err0; } l3->rt = ioremap(res->start, resource_size(res)); - if (!(l3->rt)) { + if (!l3->rt) { dev_err(&pdev->dev, "ioremap failed\n"); ret = -ENOMEM; - goto err2; + goto err0; } l3->debug_irq = platform_get_irq(pdev, 0); @@ -254,28 +244,26 @@ static int __init omap3_l3_probe(struct platform_device *pdev) "l3-debug-irq", l3); if (ret) { dev_err(&pdev->dev, "couldn't request debug irq\n"); - goto err3; + goto err1; } l3->app_irq = platform_get_irq(pdev, 1); ret = request_irq(l3->app_irq, omap3_l3_app_irq, IRQF_DISABLED | IRQF_TRIGGER_RISING, "l3-app-irq", l3); - if (ret) { dev_err(&pdev->dev, "couldn't request app irq\n"); - goto err4; + goto err2; } - goto err0; + return 0; -err4: -err3: - iounmap(l3->rt); err2: + free_irq(l3->debug_irq, l3); err1: - kfree(l3); + iounmap(l3->rt); err0: + kfree(l3); return ret; } diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-omap2/omap_phy_internal.c index 05f6abc..f47813e 100644 --- a/arch/arm/mach-omap2/omap_phy_internal.c +++ b/arch/arm/mach-omap2/omap_phy_internal.c @@ -50,13 +50,16 @@ int omap4430_phy_init(struct device *dev) { ctrl_base = ioremap(OMAP443X_SCM_BASE, SZ_1K); if (!ctrl_base) { - dev_err(dev, "control module ioremap failed\n"); + pr_err("control module ioremap failed\n"); return -ENOMEM; } /* Power down the phy */ __raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF); - phyclk = clk_get(dev, "ocp2scp_usb_phy_ick"); + if (!dev) + return 0; + + phyclk = clk_get(dev, "ocp2scp_usb_phy_ick"); if (IS_ERR(phyclk)) { dev_err(dev, "cannot clk_get ocp2scp_usb_phy_ick\n"); iounmap(ctrl_base); @@ -228,7 +231,7 @@ void am35x_musb_clear_irq(void) regval = omap_ctrl_readl(AM35XX_CONTROL_LVL_INTR_CLEAR); } -void am35x_musb_set_mode(u8 musb_mode) +void am35x_set_mode(u8 musb_mode) { u32 devconf2 = omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2); diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 797bfd1..45bcfce 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -36,11 +36,16 @@ static inline int omap4_opp_init(void) } #endif +/* + * cpuidle mach specific parameters + * + * The board code can override the default C-states definition using + * omap3_pm_init_cpuidle + */ struct cpuidle_params { - u8 valid; - u32 sleep_latency; - u32 wake_latency; - u32 threshold; + u32 exit_latency; /* exit_latency = sleep + wake-up latencies */ + u32 target_residency; + u8 valid; /* validates the C-state */ }; #if defined(CONFIG_PM) && defined(CONFIG_CPU_IDLE) @@ -73,10 +78,6 @@ extern u32 sleep_while_idle; #define sleep_while_idle 0 #endif -#if defined(CONFIG_CPU_IDLE) -extern void omap3_cpuidle_update_states(u32, u32); -#endif - #if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev); extern int pm_dbg_regset_save(int reg_set); diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index 0c5e3a4..c155c9d 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -779,18 +779,6 @@ void omap3_pm_off_mode_enable(int enable) else state = PWRDM_POWER_RET; -#ifdef CONFIG_CPU_IDLE - /* - * Erratum i583: implementation for ES rev < Es1.2 on 3630. We cannot - * enable OFF mode in a stable form for previous revisions, restrict - * instead to RET - */ - if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583)) - omap3_cpuidle_update_states(state, PWRDM_POWER_RET); - else - omap3_cpuidle_update_states(state, state); -#endif - list_for_each_entry(pwrst, &pwrst_list, node) { if (IS_PM34XX_ERRATUM(PM_SDRC_WAKEUP_ERRATUM_i583) && pwrst->pwrdm == core_pwrdm && @@ -895,8 +883,6 @@ static int __init omap3_pm_init(void) pm_errata_configure(); - printk(KERN_ERR "Power Management for TI OMAP3.\n"); - /* XXX prcm_setup_regs needs to be before enabling hw * supervised mode for powerdomains */ prcm_setup_regs(); diff --git a/arch/arm/mach-omap2/pm44xx.c b/arch/arm/mach-omap2/pm44xx.c index 76cfff2..59a870b 100644 --- a/arch/arm/mach-omap2/pm44xx.c +++ b/arch/arm/mach-omap2/pm44xx.c @@ -105,13 +105,11 @@ static int __init omap4_pm_init(void) pr_err("Power Management for TI OMAP4.\n"); -#ifdef CONFIG_PM ret = pwrdm_for_each(pwrdms_setup, NULL); if (ret) { pr_err("Failed to setup powerdomains\n"); goto err2; } -#endif #ifdef CONFIG_SUSPEND suspend_set_ops(&omap_pm_ops); diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 13e24f9..fb7dc52 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -847,6 +847,14 @@ static int __init omap_sr_probe(struct platform_device *pdev) goto err_free_devinfo; } + mem = request_mem_region(mem->start, resource_size(mem), + dev_name(&pdev->dev)); + if (!mem) { + dev_err(&pdev->dev, "%s: no mem region\n", __func__); + ret = -EBUSY; + goto err_free_devinfo; + } + irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); pm_runtime_enable(&pdev->dev); @@ -883,7 +891,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) ret = sr_late_init(sr_info); if (ret) { pr_warning("%s: Error in SR late init\n", __func__); - goto err_release_region; + return ret; } } @@ -896,7 +904,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) vdd_dbg_dir = omap_voltage_get_dbgdir(sr_info->voltdm); if (!vdd_dbg_dir) { ret = -EINVAL; - goto err_release_region; + goto err_iounmap; } sr_info->dbg_dir = debugfs_create_dir("smartreflex", vdd_dbg_dir); @@ -904,7 +912,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n", __func__); ret = PTR_ERR(sr_info->dbg_dir); - goto err_release_region; + goto err_iounmap; } (void) debugfs_create_file("autocomp", S_IRUGO | S_IWUSR, @@ -921,7 +929,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) dev_err(&pdev->dev, "%s: Unable to create debugfs directory" "for n-values\n", __func__); ret = PTR_ERR(nvalue_dir); - goto err_release_region; + goto err_debugfs; } omap_voltage_get_volttable(sr_info->voltdm, &volt_data); @@ -931,7 +939,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) "entries for n-values\n", __func__, sr_info->voltdm->name); ret = -ENODATA; - goto err_release_region; + goto err_debugfs; } for (i = 0; i < sr_info->nvalue_count; i++) { @@ -945,6 +953,11 @@ static int __init omap_sr_probe(struct platform_device *pdev) return ret; +err_debugfs: + debugfs_remove_recursive(sr_info->dbg_dir); +err_iounmap: + list_del(&sr_info->node); + iounmap(sr_info->base); err_release_region: release_mem_region(mem->start, resource_size(mem)); err_free_devinfo: diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index 35559f7..c7ed540 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -108,7 +108,13 @@ static void usb_musb_mux_init(struct omap_musb_board_data *board_data) } } -void __init usb_musb_init(struct omap_musb_board_data *board_data) +static struct omap_musb_board_data musb_default_board_data = { + .interface_type = MUSB_INTERFACE_ULPI, + .mode = MUSB_OTG, + .power = 100, +}; + +void __init usb_musb_init(struct omap_musb_board_data *musb_board_data) { struct omap_hwmod *oh; struct omap_device *od; @@ -116,11 +122,12 @@ void __init usb_musb_init(struct omap_musb_board_data *board_data) struct device *dev; int bus_id = -1; const char *oh_name, *name; + struct omap_musb_board_data *board_data; - if (cpu_is_omap3517() || cpu_is_omap3505()) { - } else if (cpu_is_omap44xx()) { - usb_musb_mux_init(board_data); - } + if (musb_board_data) + board_data = musb_board_data; + else + board_data = &musb_default_board_data; /* * REVISIT: This line can be removed once all the platforms using @@ -164,10 +171,15 @@ void __init usb_musb_init(struct omap_musb_board_data *board_data) dev->dma_mask = &musb_dmamask; dev->coherent_dma_mask = musb_dmamask; put_device(dev); + + if (cpu_is_omap44xx()) + omap4430_phy_init(dev); } #else void __init usb_musb_init(struct omap_musb_board_data *board_data) { + if (cpu_is_omap44xx()) + omap4430_phy_init(NULL); } #endif /* CONFIG_USB_MUSB_SOC */ diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c index 8a3c05f..8dd26b7 100644 --- a/arch/arm/mach-omap2/usb-tusb6010.c +++ b/arch/arm/mach-omap2/usb-tusb6010.c @@ -293,12 +293,11 @@ tusb6010_setup_interface(struct musb_hdrc_platform_data *data, ); /* IRQ */ - status = gpio_request(irq, "TUSB6010 irq"); + status = gpio_request_one(irq, GPIOF_IN, "TUSB6010 irq"); if (status < 0) { printk(error, 3, status); return status; } - gpio_direction_input(irq); tusb_resources[2].start = irq + IH_GPIO_BASE; /* set up memory timings ... can speed them up later */ diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c index 0c1552d..9ef3789 100644 --- a/arch/arm/mach-omap2/voltage.c +++ b/arch/arm/mach-omap2/voltage.c @@ -148,7 +148,6 @@ static int vp_volt_debug_get(void *data, u64 *val) } vsel = vdd->read_reg(prm_mod_offs, vdd->vp_data->voltage); - pr_notice("curr_vsel = %x\n", vsel); if (!vdd->pmic_info->vsel_to_uv) { pr_warning("PMIC function to convert vsel to voltage" diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 2fc9f94..cd19309 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -153,7 +153,6 @@ config MACH_XCEP bool "Iskratel Electronics XCEP" select PXA25x select MTD - select MTD_PARTITIONS select MTD_PHYSMAP select MTD_CFI_INTELEXT select MTD_CFI diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c index 44440cb..dabc141 100644 --- a/arch/arm/mach-s3c2410/mach-amlm5900.c +++ b/arch/arm/mach-s3c2410/mach-amlm5900.c @@ -58,8 +58,6 @@ #include <plat/cpu.h> #include <plat/gpio-cfg.h> -#ifdef CONFIG_MTD_PARTITIONS - #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/map.h> @@ -113,7 +111,6 @@ static struct platform_device amlm5900_device_nor = { .num_resources = 1, .resource = &amlm5900_nor_resource, }; -#endif static struct map_desc amlm5900_iodesc[] __initdata = { }; @@ -158,9 +155,7 @@ static struct platform_device *amlm5900_devices[] __initdata = { &s3c_device_rtc, &s3c_device_usbgadget, &s3c_device_sdi, -#ifdef CONFIG_MTD_PARTITIONS &amlm5900_device_nor, -#endif }; static void __init amlm5900_map_io(void) diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c index a15d062..43c2b83 100644 --- a/arch/arm/mach-s3c2410/mach-tct_hammer.c +++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c @@ -49,8 +49,6 @@ #include <plat/devs.h> #include <plat/cpu.h> -#ifdef CONFIG_MTD_PARTITIONS - #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/map.h> @@ -91,8 +89,6 @@ static struct platform_device tct_hammer_device_nor = { .resource = &tct_hammer_nor_resource, }; -#endif - static struct map_desc tct_hammer_iodesc[] __initdata = { }; @@ -133,9 +129,7 @@ static struct platform_device *tct_hammer_devices[] __initdata = { &s3c_device_rtc, &s3c_device_usbgadget, &s3c_device_sdi, -#ifdef CONFIG_MTD_PARTITIONS &tct_hammer_device_nor, -#endif }; static void __init tct_hammer_map_io(void) diff --git a/arch/arm/mach-s3c64xx/dev-spi.c b/arch/arm/mach-s3c64xx/dev-spi.c index 405e621..82db072 100644 --- a/arch/arm/mach-s3c64xx/dev-spi.c +++ b/arch/arm/mach-s3c64xx/dev-spi.c @@ -16,7 +16,6 @@ #include <mach/dma.h> #include <mach/map.h> -#include <mach/gpio-bank-c.h> #include <mach/spi-clocks.h> #include <mach/irqs.h> @@ -40,23 +39,15 @@ static char *spi_src_clks[] = { */ static int s3c64xx_spi_cfg_gpio(struct platform_device *pdev) { + unsigned int base; + switch (pdev->id) { case 0: - s3c_gpio_cfgpin(S3C64XX_GPC(0), S3C64XX_GPC0_SPI_MISO0); - s3c_gpio_cfgpin(S3C64XX_GPC(1), S3C64XX_GPC1_SPI_CLKO); - s3c_gpio_cfgpin(S3C64XX_GPC(2), S3C64XX_GPC2_SPI_MOSIO); - s3c_gpio_setpull(S3C64XX_GPC(0), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S3C64XX_GPC(1), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S3C64XX_GPC(2), S3C_GPIO_PULL_UP); + base = S3C64XX_GPC(0); break; case 1: - s3c_gpio_cfgpin(S3C64XX_GPC(4), S3C64XX_GPC4_SPI_MISO1); - s3c_gpio_cfgpin(S3C64XX_GPC(5), S3C64XX_GPC5_SPI_CLK1); - s3c_gpio_cfgpin(S3C64XX_GPC(6), S3C64XX_GPC6_SPI_MOSI1); - s3c_gpio_setpull(S3C64XX_GPC(4), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S3C64XX_GPC(5), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S3C64XX_GPC(6), S3C_GPIO_PULL_UP); + base = S3C64XX_GPC(4); break; default: @@ -64,6 +55,9 @@ static int s3c64xx_spi_cfg_gpio(struct platform_device *pdev) return -EINVAL; } + s3c_gpio_cfgall_range(base, 3, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); + return 0; } diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h deleted file mode 100644 index 34212e1..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h +++ /dev/null @@ -1,48 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-a.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank A register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPACON (S3C64XX_GPA_BASE + 0x00) -#define S3C64XX_GPADAT (S3C64XX_GPA_BASE + 0x04) -#define S3C64XX_GPAPUD (S3C64XX_GPA_BASE + 0x08) -#define S3C64XX_GPACONSLP (S3C64XX_GPA_BASE + 0x0c) -#define S3C64XX_GPAPUDSLP (S3C64XX_GPA_BASE + 0x10) - -#define S3C64XX_GPA_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPA_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPA_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPA0_UART_RXD0 (0x02 << 0) -#define S3C64XX_GPA0_EINT_G1_0 (0x07 << 0) - -#define S3C64XX_GPA1_UART_TXD0 (0x02 << 4) -#define S3C64XX_GPA1_EINT_G1_1 (0x07 << 4) - -#define S3C64XX_GPA2_UART_nCTS0 (0x02 << 8) -#define S3C64XX_GPA2_EINT_G1_2 (0x07 << 8) - -#define S3C64XX_GPA3_UART_nRTS0 (0x02 << 12) -#define S3C64XX_GPA3_EINT_G1_3 (0x07 << 12) - -#define S3C64XX_GPA4_UART_RXD1 (0x02 << 16) -#define S3C64XX_GPA4_EINT_G1_4 (0x07 << 16) - -#define S3C64XX_GPA5_UART_TXD1 (0x02 << 20) -#define S3C64XX_GPA5_EINT_G1_5 (0x07 << 20) - -#define S3C64XX_GPA6_UART_nCTS1 (0x02 << 24) -#define S3C64XX_GPA6_EINT_G1_6 (0x07 << 24) - -#define S3C64XX_GPA7_UART_nRTS1 (0x02 << 28) -#define S3C64XX_GPA7_EINT_G1_7 (0x07 << 28) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h deleted file mode 100644 index 7232c03..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h +++ /dev/null @@ -1,60 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-b.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank B register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPBCON (S3C64XX_GPB_BASE + 0x00) -#define S3C64XX_GPBDAT (S3C64XX_GPB_BASE + 0x04) -#define S3C64XX_GPBPUD (S3C64XX_GPB_BASE + 0x08) -#define S3C64XX_GPBCONSLP (S3C64XX_GPB_BASE + 0x0c) -#define S3C64XX_GPBPUDSLP (S3C64XX_GPB_BASE + 0x10) - -#define S3C64XX_GPB_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPB_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPB_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPB0_UART_RXD2 (0x02 << 0) -#define S3C64XX_GPB0_EXTDMA_REQ (0x03 << 0) -#define S3C64XX_GPB0_IrDA_RXD (0x04 << 0) -#define S3C64XX_GPB0_ADDR_CF0 (0x05 << 0) -#define S3C64XX_GPB0_EINT_G1_8 (0x07 << 0) - -#define S3C64XX_GPB1_UART_TXD2 (0x02 << 4) -#define S3C64XX_GPB1_EXTDMA_ACK (0x03 << 4) -#define S3C64XX_GPB1_IrDA_TXD (0x04 << 4) -#define S3C64XX_GPB1_ADDR_CF1 (0x05 << 4) -#define S3C64XX_GPB1_EINT_G1_9 (0x07 << 4) - -#define S3C64XX_GPB2_UART_RXD3 (0x02 << 8) -#define S3C64XX_GPB2_IrDA_RXD (0x03 << 8) -#define S3C64XX_GPB2_EXTDMA_REQ (0x04 << 8) -#define S3C64XX_GPB2_ADDR_CF2 (0x05 << 8) -#define S3C64XX_GPB2_I2C_SCL1 (0x06 << 8) -#define S3C64XX_GPB2_EINT_G1_10 (0x07 << 8) - -#define S3C64XX_GPB3_UART_TXD3 (0x02 << 12) -#define S3C64XX_GPB3_IrDA_TXD (0x03 << 12) -#define S3C64XX_GPB3_EXTDMA_ACK (0x04 << 12) -#define S3C64XX_GPB3_I2C_SDA1 (0x06 << 12) -#define S3C64XX_GPB3_EINT_G1_11 (0x07 << 12) - -#define S3C64XX_GPB4_IrDA_SDBW (0x02 << 16) -#define S3C64XX_GPB4_CAM_FIELD (0x03 << 16) -#define S3C64XX_GPB4_CF_DATA_DIR (0x04 << 16) -#define S3C64XX_GPB4_EINT_G1_12 (0x07 << 16) - -#define S3C64XX_GPB5_I2C_SCL0 (0x02 << 20) -#define S3C64XX_GPB5_EINT_G1_13 (0x07 << 20) - -#define S3C64XX_GPB6_I2C_SDA0 (0x02 << 24) -#define S3C64XX_GPB6_EINT_G1_14 (0x07 << 24) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h deleted file mode 100644 index db189ab..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h +++ /dev/null @@ -1,53 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-c.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank C register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPCCON (S3C64XX_GPC_BASE + 0x00) -#define S3C64XX_GPCDAT (S3C64XX_GPC_BASE + 0x04) -#define S3C64XX_GPCPUD (S3C64XX_GPC_BASE + 0x08) -#define S3C64XX_GPCCONSLP (S3C64XX_GPC_BASE + 0x0c) -#define S3C64XX_GPCPUDSLP (S3C64XX_GPC_BASE + 0x10) - -#define S3C64XX_GPC_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPC_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPC_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPC0_SPI_MISO0 (0x02 << 0) -#define S3C64XX_GPC0_EINT_G2_0 (0x07 << 0) - -#define S3C64XX_GPC1_SPI_CLKO (0x02 << 4) -#define S3C64XX_GPC1_EINT_G2_1 (0x07 << 4) - -#define S3C64XX_GPC2_SPI_MOSIO (0x02 << 8) -#define S3C64XX_GPC2_EINT_G2_2 (0x07 << 8) - -#define S3C64XX_GPC3_SPI_nCSO (0x02 << 12) -#define S3C64XX_GPC3_EINT_G2_3 (0x07 << 12) - -#define S3C64XX_GPC4_SPI_MISO1 (0x02 << 16) -#define S3C64XX_GPC4_MMC2_CMD (0x03 << 16) -#define S3C64XX_GPC4_I2S_V40_DO0 (0x05 << 16) -#define S3C64XX_GPC4_EINT_G2_4 (0x07 << 16) - -#define S3C64XX_GPC5_SPI_CLK1 (0x02 << 20) -#define S3C64XX_GPC5_MMC2_CLK (0x03 << 20) -#define S3C64XX_GPC5_I2S_V40_DO1 (0x05 << 20) -#define S3C64XX_GPC5_EINT_G2_5 (0x07 << 20) - -#define S3C64XX_GPC6_SPI_MOSI1 (0x02 << 24) -#define S3C64XX_GPC6_EINT_G2_6 (0x07 << 24) - -#define S3C64XX_GPC7_SPI_nCS1 (0x02 << 28) -#define S3C64XX_GPC7_I2S_V40_DO2 (0x05 << 28) -#define S3C64XX_GPC7_EINT_G2_7 (0x07 << 28) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h deleted file mode 100644 index 1a01cee..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h +++ /dev/null @@ -1,49 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-d.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank D register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPDCON (S3C64XX_GPD_BASE + 0x00) -#define S3C64XX_GPDDAT (S3C64XX_GPD_BASE + 0x04) -#define S3C64XX_GPDPUD (S3C64XX_GPD_BASE + 0x08) -#define S3C64XX_GPDCONSLP (S3C64XX_GPD_BASE + 0x0c) -#define S3C64XX_GPDPUDSLP (S3C64XX_GPD_BASE + 0x10) - -#define S3C64XX_GPD_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPD_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPD_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPD0_PCM0_SCLK (0x02 << 0) -#define S3C64XX_GPD0_I2S0_CLK (0x03 << 0) -#define S3C64XX_GPD0_AC97_BITCLK (0x04 << 0) -#define S3C64XX_GPD0_EINT_G3_0 (0x07 << 0) - -#define S3C64XX_GPD1_PCM0_EXTCLK (0x02 << 4) -#define S3C64XX_GPD1_I2S0_CDCLK (0x03 << 4) -#define S3C64XX_GPD1_AC97_nRESET (0x04 << 4) -#define S3C64XX_GPD1_EINT_G3_1 (0x07 << 4) - -#define S3C64XX_GPD2_PCM0_FSYNC (0x02 << 8) -#define S3C64XX_GPD2_I2S0_LRCLK (0x03 << 8) -#define S3C64XX_GPD2_AC97_SYNC (0x04 << 8) -#define S3C64XX_GPD2_EINT_G3_2 (0x07 << 8) - -#define S3C64XX_GPD3_PCM0_SIN (0x02 << 12) -#define S3C64XX_GPD3_I2S0_DI (0x03 << 12) -#define S3C64XX_GPD3_AC97_SDI (0x04 << 12) -#define S3C64XX_GPD3_EINT_G3_3 (0x07 << 12) - -#define S3C64XX_GPD4_PCM0_SOUT (0x02 << 16) -#define S3C64XX_GPD4_I2S0_D0 (0x03 << 16) -#define S3C64XX_GPD4_AC97_SDO (0x04 << 16) -#define S3C64XX_GPD4_EINT_G3_4 (0x07 << 16) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h deleted file mode 100644 index f057adb..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h +++ /dev/null @@ -1,44 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-e.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank E register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPECON (S3C64XX_GPE_BASE + 0x00) -#define S3C64XX_GPEDAT (S3C64XX_GPE_BASE + 0x04) -#define S3C64XX_GPEPUD (S3C64XX_GPE_BASE + 0x08) -#define S3C64XX_GPECONSLP (S3C64XX_GPE_BASE + 0x0c) -#define S3C64XX_GPEPUDSLP (S3C64XX_GPE_BASE + 0x10) - -#define S3C64XX_GPE_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPE_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPE_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPE0_PCM1_SCLK (0x02 << 0) -#define S3C64XX_GPE0_I2S1_CLK (0x03 << 0) -#define S3C64XX_GPE0_AC97_BITCLK (0x04 << 0) - -#define S3C64XX_GPE1_PCM1_EXTCLK (0x02 << 4) -#define S3C64XX_GPE1_I2S1_CDCLK (0x03 << 4) -#define S3C64XX_GPE1_AC97_nRESET (0x04 << 4) - -#define S3C64XX_GPE2_PCM1_FSYNC (0x02 << 8) -#define S3C64XX_GPE2_I2S1_LRCLK (0x03 << 8) -#define S3C64XX_GPE2_AC97_SYNC (0x04 << 8) - -#define S3C64XX_GPE3_PCM1_SIN (0x02 << 12) -#define S3C64XX_GPE3_I2S1_DI (0x03 << 12) -#define S3C64XX_GPE3_AC97_SDI (0x04 << 12) - -#define S3C64XX_GPE4_PCM1_SOUT (0x02 << 16) -#define S3C64XX_GPE4_I2S1_D0 (0x03 << 16) -#define S3C64XX_GPE4_AC97_SDO (0x04 << 16) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h deleted file mode 100644 index 62ab8f5..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h +++ /dev/null @@ -1,71 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-f.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank F register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPFCON (S3C64XX_GPF_BASE + 0x00) -#define S3C64XX_GPFDAT (S3C64XX_GPF_BASE + 0x04) -#define S3C64XX_GPFPUD (S3C64XX_GPF_BASE + 0x08) -#define S3C64XX_GPFCONSLP (S3C64XX_GPF_BASE + 0x0c) -#define S3C64XX_GPFPUDSLP (S3C64XX_GPF_BASE + 0x10) - -#define S3C64XX_GPF_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPF_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPF_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPF0_CAMIF_CLK (0x02 << 0) -#define S3C64XX_GPF0_EINT_G4_0 (0x03 << 0) - -#define S3C64XX_GPF1_CAMIF_HREF (0x02 << 2) -#define S3C64XX_GPF1_EINT_G4_1 (0x03 << 2) - -#define S3C64XX_GPF2_CAMIF_PCLK (0x02 << 4) -#define S3C64XX_GPF2_EINT_G4_2 (0x03 << 4) - -#define S3C64XX_GPF3_CAMIF_nRST (0x02 << 6) -#define S3C64XX_GPF3_EINT_G4_3 (0x03 << 6) - -#define S3C64XX_GPF4_CAMIF_VSYNC (0x02 << 8) -#define S3C64XX_GPF4_EINT_G4_4 (0x03 << 8) - -#define S3C64XX_GPF5_CAMIF_YDATA0 (0x02 << 10) -#define S3C64XX_GPF5_EINT_G4_5 (0x03 << 10) - -#define S3C64XX_GPF6_CAMIF_YDATA1 (0x02 << 12) -#define S3C64XX_GPF6_EINT_G4_6 (0x03 << 12) - -#define S3C64XX_GPF7_CAMIF_YDATA2 (0x02 << 14) -#define S3C64XX_GPF7_EINT_G4_7 (0x03 << 14) - -#define S3C64XX_GPF8_CAMIF_YDATA3 (0x02 << 16) -#define S3C64XX_GPF8_EINT_G4_8 (0x03 << 16) - -#define S3C64XX_GPF9_CAMIF_YDATA4 (0x02 << 18) -#define S3C64XX_GPF9_EINT_G4_9 (0x03 << 18) - -#define S3C64XX_GPF10_CAMIF_YDATA5 (0x02 << 20) -#define S3C64XX_GPF10_EINT_G4_10 (0x03 << 20) - -#define S3C64XX_GPF11_CAMIF_YDATA6 (0x02 << 22) -#define S3C64XX_GPF11_EINT_G4_11 (0x03 << 22) - -#define S3C64XX_GPF12_CAMIF_YDATA7 (0x02 << 24) -#define S3C64XX_GPF12_EINT_G4_12 (0x03 << 24) - -#define S3C64XX_GPF13_PWM_ECLK (0x02 << 26) -#define S3C64XX_GPF13_EINT_G4_13 (0x03 << 26) - -#define S3C64XX_GPF14_PWM_TOUT0 (0x02 << 28) -#define S3C64XX_GPF14_CLKOUT0 (0x03 << 28) - -#define S3C64XX_GPF15_PWM_TOUT1 (0x02 << 30) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h deleted file mode 100644 index b94954a..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h +++ /dev/null @@ -1,42 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-g.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank G register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPGCON (S3C64XX_GPG_BASE + 0x00) -#define S3C64XX_GPGDAT (S3C64XX_GPG_BASE + 0x04) -#define S3C64XX_GPGPUD (S3C64XX_GPG_BASE + 0x08) -#define S3C64XX_GPGCONSLP (S3C64XX_GPG_BASE + 0x0c) -#define S3C64XX_GPGPUDSLP (S3C64XX_GPG_BASE + 0x10) - -#define S3C64XX_GPG_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPG_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPG_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPG0_MMC0_CLK (0x02 << 0) -#define S3C64XX_GPG0_EINT_G5_0 (0x07 << 0) - -#define S3C64XX_GPG1_MMC0_CMD (0x02 << 4) -#define S3C64XX_GPG1_EINT_G5_1 (0x07 << 4) - -#define S3C64XX_GPG2_MMC0_DATA0 (0x02 << 8) -#define S3C64XX_GPG2_EINT_G5_2 (0x07 << 8) - -#define S3C64XX_GPG3_MMC0_DATA1 (0x02 << 12) -#define S3C64XX_GPG3_EINT_G5_3 (0x07 << 12) - -#define S3C64XX_GPG4_MMC0_DATA2 (0x02 << 16) -#define S3C64XX_GPG4_EINT_G5_4 (0x07 << 16) - -#define S3C64XX_GPG5_MMC0_DATA3 (0x02 << 20) -#define S3C64XX_GPG5_EINT_G5_5 (0x07 << 20) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h deleted file mode 100644 index 5d75aaa..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h +++ /dev/null @@ -1,74 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-h.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank H register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPHCON0 (S3C64XX_GPH_BASE + 0x00) -#define S3C64XX_GPHCON1 (S3C64XX_GPH_BASE + 0x04) -#define S3C64XX_GPHDAT (S3C64XX_GPH_BASE + 0x08) -#define S3C64XX_GPHPUD (S3C64XX_GPH_BASE + 0x0c) -#define S3C64XX_GPHCONSLP (S3C64XX_GPH_BASE + 0x10) -#define S3C64XX_GPHPUDSLP (S3C64XX_GPH_BASE + 0x14) - -#define S3C64XX_GPH_CONMASK(__gpio) (0xf << ((__gpio) * 4)) -#define S3C64XX_GPH_INPUT(__gpio) (0x0 << ((__gpio) * 4)) -#define S3C64XX_GPH_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) - -#define S3C64XX_GPH0_MMC1_CLK (0x02 << 0) -#define S3C64XX_GPH0_KP_COL0 (0x04 << 0) -#define S3C64XX_GPH0_EINT_G6_0 (0x07 << 0) - -#define S3C64XX_GPH1_MMC1_CMD (0x02 << 4) -#define S3C64XX_GPH1_KP_COL1 (0x04 << 4) -#define S3C64XX_GPH1_EINT_G6_1 (0x07 << 4) - -#define S3C64XX_GPH2_MMC1_DATA0 (0x02 << 8) -#define S3C64XX_GPH2_KP_COL2 (0x04 << 8) -#define S3C64XX_GPH2_EINT_G6_2 (0x07 << 8) - -#define S3C64XX_GPH3_MMC1_DATA1 (0x02 << 12) -#define S3C64XX_GPH3_KP_COL3 (0x04 << 12) -#define S3C64XX_GPH3_EINT_G6_3 (0x07 << 12) - -#define S3C64XX_GPH4_MMC1_DATA2 (0x02 << 16) -#define S3C64XX_GPH4_KP_COL4 (0x04 << 16) -#define S3C64XX_GPH4_EINT_G6_4 (0x07 << 16) - -#define S3C64XX_GPH5_MMC1_DATA3 (0x02 << 20) -#define S3C64XX_GPH5_KP_COL5 (0x04 << 20) -#define S3C64XX_GPH5_EINT_G6_5 (0x07 << 20) - -#define S3C64XX_GPH6_MMC1_DATA4 (0x02 << 24) -#define S3C64XX_GPH6_MMC2_DATA0 (0x03 << 24) -#define S3C64XX_GPH6_KP_COL6 (0x04 << 24) -#define S3C64XX_GPH6_I2S_V40_BCLK (0x05 << 24) -#define S3C64XX_GPH6_ADDR_CF0 (0x06 << 24) -#define S3C64XX_GPH6_EINT_G6_6 (0x07 << 24) - -#define S3C64XX_GPH7_MMC1_DATA5 (0x02 << 28) -#define S3C64XX_GPH7_MMC2_DATA1 (0x03 << 28) -#define S3C64XX_GPH7_KP_COL7 (0x04 << 28) -#define S3C64XX_GPH7_I2S_V40_CDCLK (0x05 << 28) -#define S3C64XX_GPH7_ADDR_CF1 (0x06 << 28) -#define S3C64XX_GPH7_EINT_G6_7 (0x07 << 28) - -#define S3C64XX_GPH8_MMC1_DATA6 (0x02 << 0) -#define S3C64XX_GPH8_MMC2_DATA2 (0x03 << 0) -#define S3C64XX_GPH8_I2S_V40_LRCLK (0x05 << 0) -#define S3C64XX_GPH8_ADDR_CF2 (0x06 << 0) -#define S3C64XX_GPH8_EINT_G6_8 (0x07 << 0) - -#define S3C64XX_GPH9_OUTPUT (0x01 << 4) -#define S3C64XX_GPH9_MMC1_DATA7 (0x02 << 4) -#define S3C64XX_GPH9_MMC2_DATA3 (0x03 << 4) -#define S3C64XX_GPH9_I2S_V40_DI (0x05 << 4) -#define S3C64XX_GPH9_EINT_G6_9 (0x07 << 4) diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h deleted file mode 100644 index 4ceaa60..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h +++ /dev/null @@ -1,40 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-i.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank I register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPICON (S3C64XX_GPI_BASE + 0x00) -#define S3C64XX_GPIDAT (S3C64XX_GPI_BASE + 0x04) -#define S3C64XX_GPIPUD (S3C64XX_GPI_BASE + 0x08) -#define S3C64XX_GPICONSLP (S3C64XX_GPI_BASE + 0x0c) -#define S3C64XX_GPIPUDSLP (S3C64XX_GPI_BASE + 0x10) - -#define S3C64XX_GPI_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPI_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPI_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPI0_VD0 (0x02 << 0) -#define S3C64XX_GPI1_VD1 (0x02 << 2) -#define S3C64XX_GPI2_VD2 (0x02 << 4) -#define S3C64XX_GPI3_VD3 (0x02 << 6) -#define S3C64XX_GPI4_VD4 (0x02 << 8) -#define S3C64XX_GPI5_VD5 (0x02 << 10) -#define S3C64XX_GPI6_VD6 (0x02 << 12) -#define S3C64XX_GPI7_VD7 (0x02 << 14) -#define S3C64XX_GPI8_VD8 (0x02 << 16) -#define S3C64XX_GPI9_VD9 (0x02 << 18) -#define S3C64XX_GPI10_VD10 (0x02 << 20) -#define S3C64XX_GPI11_VD11 (0x02 << 22) -#define S3C64XX_GPI12_VD12 (0x02 << 24) -#define S3C64XX_GPI13_VD13 (0x02 << 26) -#define S3C64XX_GPI14_VD14 (0x02 << 28) -#define S3C64XX_GPI15_VD15 (0x02 << 30) diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h deleted file mode 100644 index 6f25cd0..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h +++ /dev/null @@ -1,36 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-j.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank J register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPJCON (S3C64XX_GPJ_BASE + 0x00) -#define S3C64XX_GPJDAT (S3C64XX_GPJ_BASE + 0x04) -#define S3C64XX_GPJPUD (S3C64XX_GPJ_BASE + 0x08) -#define S3C64XX_GPJCONSLP (S3C64XX_GPJ_BASE + 0x0c) -#define S3C64XX_GPJPUDSLP (S3C64XX_GPJ_BASE + 0x10) - -#define S3C64XX_GPJ_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPJ_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPJ_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPJ0_VD16 (0x02 << 0) -#define S3C64XX_GPJ1_VD17 (0x02 << 2) -#define S3C64XX_GPJ2_VD18 (0x02 << 4) -#define S3C64XX_GPJ3_VD19 (0x02 << 6) -#define S3C64XX_GPJ4_VD20 (0x02 << 8) -#define S3C64XX_GPJ5_VD21 (0x02 << 10) -#define S3C64XX_GPJ6_VD22 (0x02 << 12) -#define S3C64XX_GPJ7_VD23 (0x02 << 14) -#define S3C64XX_GPJ8_LCD_HSYNC (0x02 << 16) -#define S3C64XX_GPJ9_LCD_VSYNC (0x02 << 18) -#define S3C64XX_GPJ10_LCD_VDEN (0x02 << 20) -#define S3C64XX_GPJ11_LCD_VCLK (0x02 << 22) diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h deleted file mode 100644 index d0aeda1..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h +++ /dev/null @@ -1,54 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-n.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank N register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPNCON (S3C64XX_GPN_BASE + 0x00) -#define S3C64XX_GPNDAT (S3C64XX_GPN_BASE + 0x04) -#define S3C64XX_GPNPUD (S3C64XX_GPN_BASE + 0x08) - -#define S3C64XX_GPN_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPN_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPN_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPN0_EINT0 (0x02 << 0) -#define S3C64XX_GPN0_KP_ROW0 (0x03 << 0) - -#define S3C64XX_GPN1_EINT1 (0x02 << 2) -#define S3C64XX_GPN1_KP_ROW1 (0x03 << 2) - -#define S3C64XX_GPN2_EINT2 (0x02 << 4) -#define S3C64XX_GPN2_KP_ROW2 (0x03 << 4) - -#define S3C64XX_GPN3_EINT3 (0x02 << 6) -#define S3C64XX_GPN3_KP_ROW3 (0x03 << 6) - -#define S3C64XX_GPN4_EINT4 (0x02 << 8) -#define S3C64XX_GPN4_KP_ROW4 (0x03 << 8) - -#define S3C64XX_GPN5_EINT5 (0x02 << 10) -#define S3C64XX_GPN5_KP_ROW5 (0x03 << 10) - -#define S3C64XX_GPN6_EINT6 (0x02 << 12) -#define S3C64XX_GPN6_KP_ROW6 (0x03 << 12) - -#define S3C64XX_GPN7_EINT7 (0x02 << 14) -#define S3C64XX_GPN7_KP_ROW7 (0x03 << 14) - -#define S3C64XX_GPN8_EINT8 (0x02 << 16) -#define S3C64XX_GPN9_EINT9 (0x02 << 18) -#define S3C64XX_GPN10_EINT10 (0x02 << 20) -#define S3C64XX_GPN11_EINT11 (0x02 << 22) -#define S3C64XX_GPN12_EINT12 (0x02 << 24) -#define S3C64XX_GPN13_EINT13 (0x02 << 26) -#define S3C64XX_GPN14_EINT14 (0x02 << 28) -#define S3C64XX_GPN15_EINT15 (0x02 << 30) diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h deleted file mode 100644 index 21868fa..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h +++ /dev/null @@ -1,70 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-o.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank O register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPOCON (S3C64XX_GPO_BASE + 0x00) -#define S3C64XX_GPODAT (S3C64XX_GPO_BASE + 0x04) -#define S3C64XX_GPOPUD (S3C64XX_GPO_BASE + 0x08) -#define S3C64XX_GPOCONSLP (S3C64XX_GPO_BASE + 0x0c) -#define S3C64XX_GPOPUDSLP (S3C64XX_GPO_BASE + 0x10) - -#define S3C64XX_GPO_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPO_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPO_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPO0_MEM0_nCS2 (0x02 << 0) -#define S3C64XX_GPO0_EINT_G7_0 (0x03 << 0) - -#define S3C64XX_GPO1_MEM0_nCS3 (0x02 << 2) -#define S3C64XX_GPO1_EINT_G7_1 (0x03 << 2) - -#define S3C64XX_GPO2_MEM0_nCS4 (0x02 << 4) -#define S3C64XX_GPO2_EINT_G7_2 (0x03 << 4) - -#define S3C64XX_GPO3_MEM0_nCS5 (0x02 << 6) -#define S3C64XX_GPO3_EINT_G7_3 (0x03 << 6) - -#define S3C64XX_GPO4_EINT_G7_4 (0x03 << 8) - -#define S3C64XX_GPO5_EINT_G7_5 (0x03 << 10) - -#define S3C64XX_GPO6_MEM0_ADDR6 (0x02 << 12) -#define S3C64XX_GPO6_EINT_G7_6 (0x03 << 12) - -#define S3C64XX_GPO7_MEM0_ADDR7 (0x02 << 14) -#define S3C64XX_GPO7_EINT_G7_7 (0x03 << 14) - -#define S3C64XX_GPO8_MEM0_ADDR8 (0x02 << 16) -#define S3C64XX_GPO8_EINT_G7_8 (0x03 << 16) - -#define S3C64XX_GPO9_MEM0_ADDR9 (0x02 << 18) -#define S3C64XX_GPO9_EINT_G7_9 (0x03 << 18) - -#define S3C64XX_GPO10_MEM0_ADDR10 (0x02 << 20) -#define S3C64XX_GPO10_EINT_G7_10 (0x03 << 20) - -#define S3C64XX_GPO11_MEM0_ADDR11 (0x02 << 22) -#define S3C64XX_GPO11_EINT_G7_11 (0x03 << 22) - -#define S3C64XX_GPO12_MEM0_ADDR12 (0x02 << 24) -#define S3C64XX_GPO12_EINT_G7_12 (0x03 << 24) - -#define S3C64XX_GPO13_MEM0_ADDR13 (0x02 << 26) -#define S3C64XX_GPO13_EINT_G7_13 (0x03 << 26) - -#define S3C64XX_GPO14_MEM0_ADDR14 (0x02 << 28) -#define S3C64XX_GPO14_EINT_G7_14 (0x03 << 28) - -#define S3C64XX_GPO15_MEM0_ADDR15 (0x02 << 30) -#define S3C64XX_GPO15_EINT_G7_15 (0x03 << 30) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h deleted file mode 100644 index 46bcfb6..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h +++ /dev/null @@ -1,69 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-p.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank P register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPPCON (S3C64XX_GPP_BASE + 0x00) -#define S3C64XX_GPPDAT (S3C64XX_GPP_BASE + 0x04) -#define S3C64XX_GPPPUD (S3C64XX_GPP_BASE + 0x08) -#define S3C64XX_GPPCONSLP (S3C64XX_GPP_BASE + 0x0c) -#define S3C64XX_GPPPUDSLP (S3C64XX_GPP_BASE + 0x10) - -#define S3C64XX_GPP_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPP_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPP_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPP0_MEM0_ADDRV (0x02 << 0) -#define S3C64XX_GPP0_EINT_G8_0 (0x03 << 0) - -#define S3C64XX_GPP1_MEM0_SMCLK (0x02 << 2) -#define S3C64XX_GPP1_EINT_G8_1 (0x03 << 2) - -#define S3C64XX_GPP2_MEM0_nWAIT (0x02 << 4) -#define S3C64XX_GPP2_EINT_G8_2 (0x03 << 4) - -#define S3C64XX_GPP3_MEM0_RDY0_ALE (0x02 << 6) -#define S3C64XX_GPP3_EINT_G8_3 (0x03 << 6) - -#define S3C64XX_GPP4_MEM0_RDY1_CLE (0x02 << 8) -#define S3C64XX_GPP4_EINT_G8_4 (0x03 << 8) - -#define S3C64XX_GPP5_MEM0_INTsm0_FWE (0x02 << 10) -#define S3C64XX_GPP5_EINT_G8_5 (0x03 << 10) - -#define S3C64XX_GPP6_MEM0_(null) (0x02 << 12) -#define S3C64XX_GPP6_EINT_G8_6 (0x03 << 12) - -#define S3C64XX_GPP7_MEM0_INTsm1_FRE (0x02 << 14) -#define S3C64XX_GPP7_EINT_G8_7 (0x03 << 14) - -#define S3C64XX_GPP8_MEM0_RPn_RnB (0x02 << 16) -#define S3C64XX_GPP8_EINT_G8_8 (0x03 << 16) - -#define S3C64XX_GPP9_MEM0_ATA_RESET (0x02 << 18) -#define S3C64XX_GPP9_EINT_G8_9 (0x03 << 18) - -#define S3C64XX_GPP10_MEM0_ATA_INPACK (0x02 << 20) -#define S3C64XX_GPP10_EINT_G8_10 (0x03 << 20) - -#define S3C64XX_GPP11_MEM0_ATA_REG (0x02 << 22) -#define S3C64XX_GPP11_EINT_G8_11 (0x03 << 22) - -#define S3C64XX_GPP12_MEM0_ATA_WE (0x02 << 24) -#define S3C64XX_GPP12_EINT_G8_12 (0x03 << 24) - -#define S3C64XX_GPP13_MEM0_ATA_OE (0x02 << 26) -#define S3C64XX_GPP13_EINT_G8_13 (0x03 << 26) - -#define S3C64XX_GPP14_MEM0_ATA_CD (0x02 << 28) -#define S3C64XX_GPP14_EINT_G8_14 (0x03 << 28) - diff --git a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h b/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h deleted file mode 100644 index 1712223..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h +++ /dev/null @@ -1,46 +0,0 @@ -/* linux/arch/arm/mach-s3c64xx/include/mach/gpio-bank-q.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * GPIO Bank Q register and configuration definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C64XX_GPQCON (S3C64XX_GPQ_BASE + 0x00) -#define S3C64XX_GPQDAT (S3C64XX_GPQ_BASE + 0x04) -#define S3C64XX_GPQPUD (S3C64XX_GPQ_BASE + 0x08) -#define S3C64XX_GPQCONSLP (S3C64XX_GPQ_BASE + 0x0c) -#define S3C64XX_GPQPUDSLP (S3C64XX_GPQ_BASE + 0x10) - -#define S3C64XX_GPQ_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) -#define S3C64XX_GPQ_INPUT(__gpio) (0x0 << ((__gpio) * 2)) -#define S3C64XX_GPQ_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) - -#define S3C64XX_GPQ0_MEM0_ADDR18_RAS (0x02 << 0) -#define S3C64XX_GPQ0_EINT_G9_0 (0x03 << 0) - -#define S3C64XX_GPQ1_MEM0_ADDR19_CAS (0x02 << 2) -#define S3C64XX_GPQ1_EINT_G9_1 (0x03 << 2) - -#define S3C64XX_GPQ2_EINT_G9_2 (0x03 << 4) - -#define S3C64XX_GPQ3_EINT_G9_3 (0x03 << 6) - -#define S3C64XX_GPQ4_EINT_G9_4 (0x03 << 8) - -#define S3C64XX_GPQ5_EINT_G9_5 (0x03 << 10) - -#define S3C64XX_GPQ6_EINT_G9_6 (0x03 << 12) - -#define S3C64XX_GPQ7_MEM0_ADDR17_WENDMC (0x02 << 14) -#define S3C64XX_GPQ7_EINT_G9_7 (0x03 << 14) - -#define S3C64XX_GPQ8_MEM0_ADDR16_APDMC (0x02 << 16) -#define S3C64XX_GPQ8_EINT_G9_8 (0x03 << 16) - diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index 686a4f2..2c0353a 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -50,7 +50,6 @@ #include <mach/hardware.h> #include <mach/regs-fb.h> #include <mach/map.h> -#include <mach/gpio-bank-f.h> #include <asm/irq.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index 79412f7..bc1c470 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -30,26 +30,18 @@ #include <mach/regs-gpio-memport.h> #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK -#include <mach/gpio-bank-n.h> - void s3c_pm_debug_smdkled(u32 set, u32 clear) { unsigned long flags; - u32 reg; + int i; local_irq_save(flags); - reg = __raw_readl(S3C64XX_GPNCON); - reg &= ~(S3C64XX_GPN_CONMASK(12) | S3C64XX_GPN_CONMASK(13) | - S3C64XX_GPN_CONMASK(14) | S3C64XX_GPN_CONMASK(15)); - reg |= S3C64XX_GPN_OUTPUT(12) | S3C64XX_GPN_OUTPUT(13) | - S3C64XX_GPN_OUTPUT(14) | S3C64XX_GPN_OUTPUT(15); - __raw_writel(reg, S3C64XX_GPNCON); - - reg = __raw_readl(S3C64XX_GPNDAT); - reg &= ~(clear << 12); - reg |= set << 12; - __raw_writel(reg, S3C64XX_GPNDAT); - + for (i = 0; i < 4; i++) { + if (clear & (1 << i)) + gpio_set_value(S3C64XX_GPN(12 + i), 0); + if (set & (1 << i)) + gpio_set_value(S3C64XX_GPN(12 + i), 1); + } local_irq_restore(flags); } #endif @@ -187,6 +179,18 @@ static int s3c64xx_pm_init(void) pm_cpu_prep = s3c64xx_pm_prepare; pm_cpu_sleep = s3c64xx_cpu_suspend; pm_uart_udivslot = 1; + +#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK + gpio_request(S3C64XX_GPN(12), "DEBUG_LED0"); + gpio_request(S3C64XX_GPN(13), "DEBUG_LED1"); + gpio_request(S3C64XX_GPN(14), "DEBUG_LED2"); + gpio_request(S3C64XX_GPN(15), "DEBUG_LED3"); + gpio_direction_output(S3C64XX_GPN(12), 0); + gpio_direction_output(S3C64XX_GPN(13), 0); + gpio_direction_output(S3C64XX_GPN(14), 0); + gpio_direction_output(S3C64XX_GPN(15), 0); +#endif + return 0; } diff --git a/arch/arm/mach-s3c64xx/setup-i2c0.c b/arch/arm/mach-s3c64xx/setup-i2c0.c index 406192a..241af94 100644 --- a/arch/arm/mach-s3c64xx/setup-i2c0.c +++ b/arch/arm/mach-s3c64xx/setup-i2c0.c @@ -18,14 +18,11 @@ struct platform_device; /* don't need the contents */ -#include <mach/gpio-bank-b.h> #include <plat/iic.h> #include <plat/gpio-cfg.h> void s3c_i2c0_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgpin(S3C64XX_GPB(5), S3C64XX_GPB5_I2C_SCL0); - s3c_gpio_cfgpin(S3C64XX_GPB(6), S3C64XX_GPB6_I2C_SDA0); - s3c_gpio_setpull(S3C64XX_GPB(5), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S3C64XX_GPB(6), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(S3C64XX_GPB(5), 2, + S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s3c64xx/setup-i2c1.c b/arch/arm/mach-s3c64xx/setup-i2c1.c index 1ee62c9..3d13a96 100644 --- a/arch/arm/mach-s3c64xx/setup-i2c1.c +++ b/arch/arm/mach-s3c64xx/setup-i2c1.c @@ -18,14 +18,11 @@ struct platform_device; /* don't need the contents */ -#include <mach/gpio-bank-b.h> #include <plat/iic.h> #include <plat/gpio-cfg.h> void s3c_i2c1_cfg_gpio(struct platform_device *dev) { - s3c_gpio_cfgpin(S3C64XX_GPB(2), S3C64XX_GPB2_I2C_SCL1); - s3c_gpio_cfgpin(S3C64XX_GPB(3), S3C64XX_GPB3_I2C_SDA1); - s3c_gpio_setpull(S3C64XX_GPB(2), S3C_GPIO_PULL_UP); - s3c_gpio_setpull(S3C64XX_GPB(3), S3C_GPIO_PULL_UP); + s3c_gpio_cfgall_range(S3C64XX_GPB(2), 2, + S3C_GPIO_SFN(6), S3C_GPIO_PULL_UP); } diff --git a/arch/arm/mach-s3c64xx/sleep.S b/arch/arm/mach-s3c64xx/sleep.S index afe5a76..1f87732 100644 --- a/arch/arm/mach-s3c64xx/sleep.S +++ b/arch/arm/mach-s3c64xx/sleep.S @@ -20,7 +20,6 @@ #define S3C64XX_VA_GPIO (0x0) #include <mach/regs-gpio.h> -#include <mach/gpio-bank-n.h> #define LL_UART (S3C_PA_UART + (0x400 * CONFIG_S3C_LOWLEVEL_UART_PORT)) @@ -68,6 +67,13 @@ ENTRY(s3c_cpu_resume) ldr r2, =LL_UART /* for debug */ #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK + +#define S3C64XX_GPNCON (S3C64XX_GPN_BASE + 0x00) +#define S3C64XX_GPNDAT (S3C64XX_GPN_BASE + 0x04) + +#define S3C64XX_GPN_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) +#define S3C64XX_GPN_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) + /* Initialise the GPIO state if we are debugging via the SMDK LEDs, * as the uboot version supplied resets these to inputs during the * resume checks. diff --git a/arch/arm/mach-s5p6442/Kconfig b/arch/arm/mach-s5p6442/Kconfig deleted file mode 100644 index 33569e4..0000000 --- a/arch/arm/mach-s5p6442/Kconfig +++ /dev/null @@ -1,25 +0,0 @@ -# arch/arm/mach-s5p6442/Kconfig -# -# Copyright (c) 2010 Samsung Electronics Co., Ltd. -# http://www.samsung.com/ -# -# Licensed under GPLv2 - -# Configuration options for the S5P6442 - -if ARCH_S5P6442 - -config CPU_S5P6442 - bool - select S3C_PL330_DMA - help - Enable S5P6442 CPU support - -config MACH_SMDK6442 - bool "SMDK6442" - select CPU_S5P6442 - select S3C_DEV_WDT - help - Machine support for Samsung SMDK6442 - -endif diff --git a/arch/arm/mach-s5p6442/Makefile b/arch/arm/mach-s5p6442/Makefile deleted file mode 100644 index 90a3d83..0000000 --- a/arch/arm/mach-s5p6442/Makefile +++ /dev/null @@ -1,24 +0,0 @@ -# arch/arm/mach-s5p6442/Makefile -# -# Copyright (c) 2010 Samsung Electronics Co., Ltd. -# http://www.samsung.com/ -# -# Licensed under GPLv2 - -obj-y := -obj-m := -obj-n := -obj- := - -# Core support for S5P6442 system - -obj-$(CONFIG_CPU_S5P6442) += cpu.o init.o clock.o dma.o -obj-$(CONFIG_CPU_S5P6442) += setup-i2c0.o - -# machine support - -obj-$(CONFIG_MACH_SMDK6442) += mach-smdk6442.o - -# device support -obj-y += dev-audio.o -obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o diff --git a/arch/arm/mach-s5p6442/Makefile.boot b/arch/arm/mach-s5p6442/Makefile.boot deleted file mode 100644 index ff90aa1..0000000 --- a/arch/arm/mach-s5p6442/Makefile.boot +++ /dev/null @@ -1,2 +0,0 @@ - zreladdr-y := 0x20008000 -params_phys-y := 0x20000100 diff --git a/arch/arm/mach-s5p6442/clock.c b/arch/arm/mach-s5p6442/clock.c deleted file mode 100644 index fbbc7be..0000000 --- a/arch/arm/mach-s5p6442/clock.c +++ /dev/null @@ -1,420 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/clock.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - Clock support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> - -#include <mach/map.h> - -#include <plat/cpu-freq.h> -#include <mach/regs-clock.h> -#include <plat/clock.h> -#include <plat/cpu.h> -#include <plat/pll.h> -#include <plat/s5p-clock.h> -#include <plat/clock-clksrc.h> -#include <plat/s5p6442.h> - -static struct clksrc_clk clk_mout_apll = { - .clk = { - .name = "mout_apll", - .id = -1, - }, - .sources = &clk_src_apll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 }, -}; - -static struct clksrc_clk clk_mout_mpll = { - .clk = { - .name = "mout_mpll", - .id = -1, - }, - .sources = &clk_src_mpll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 }, -}; - -static struct clksrc_clk clk_mout_epll = { - .clk = { - .name = "mout_epll", - .id = -1, - }, - .sources = &clk_src_epll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 }, -}; - -/* Possible clock sources for ARM Mux */ -static struct clk *clk_src_arm_list[] = { - [1] = &clk_mout_apll.clk, - [2] = &clk_mout_mpll.clk, -}; - -static struct clksrc_sources clk_src_arm = { - .sources = clk_src_arm_list, - .nr_sources = ARRAY_SIZE(clk_src_arm_list), -}; - -static struct clksrc_clk clk_mout_arm = { - .clk = { - .name = "mout_arm", - .id = -1, - }, - .sources = &clk_src_arm, - .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 16, .size = 3 }, -}; - -static struct clk clk_dout_a2m = { - .name = "dout_a2m", - .id = -1, - .parent = &clk_mout_apll.clk, -}; - -/* Possible clock sources for D0 Mux */ -static struct clk *clk_src_d0_list[] = { - [1] = &clk_mout_mpll.clk, - [2] = &clk_dout_a2m, -}; - -static struct clksrc_sources clk_src_d0 = { - .sources = clk_src_d0_list, - .nr_sources = ARRAY_SIZE(clk_src_d0_list), -}; - -static struct clksrc_clk clk_mout_d0 = { - .clk = { - .name = "mout_d0", - .id = -1, - }, - .sources = &clk_src_d0, - .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 20, .size = 3 }, -}; - -static struct clk clk_dout_apll = { - .name = "dout_apll", - .id = -1, - .parent = &clk_mout_arm.clk, -}; - -/* Possible clock sources for D0SYNC Mux */ -static struct clk *clk_src_d0sync_list[] = { - [1] = &clk_mout_d0.clk, - [2] = &clk_dout_apll, -}; - -static struct clksrc_sources clk_src_d0sync = { - .sources = clk_src_d0sync_list, - .nr_sources = ARRAY_SIZE(clk_src_d0sync_list), -}; - -static struct clksrc_clk clk_mout_d0sync = { - .clk = { - .name = "mout_d0sync", - .id = -1, - }, - .sources = &clk_src_d0sync, - .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 }, -}; - -/* Possible clock sources for D1 Mux */ -static struct clk *clk_src_d1_list[] = { - [1] = &clk_mout_mpll.clk, - [2] = &clk_dout_a2m, -}; - -static struct clksrc_sources clk_src_d1 = { - .sources = clk_src_d1_list, - .nr_sources = ARRAY_SIZE(clk_src_d1_list), -}; - -static struct clksrc_clk clk_mout_d1 = { - .clk = { - .name = "mout_d1", - .id = -1, - }, - .sources = &clk_src_d1, - .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 24, .size = 3 }, -}; - -/* Possible clock sources for D1SYNC Mux */ -static struct clk *clk_src_d1sync_list[] = { - [1] = &clk_mout_d1.clk, - [2] = &clk_dout_apll, -}; - -static struct clksrc_sources clk_src_d1sync = { - .sources = clk_src_d1sync_list, - .nr_sources = ARRAY_SIZE(clk_src_d1sync_list), -}; - -static struct clksrc_clk clk_mout_d1sync = { - .clk = { - .name = "mout_d1sync", - .id = -1, - }, - .sources = &clk_src_d1sync, - .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 }, -}; - -static struct clk clk_hclkd0 = { - .name = "hclkd0", - .id = -1, - .parent = &clk_mout_d0sync.clk, -}; - -static struct clk clk_hclkd1 = { - .name = "hclkd1", - .id = -1, - .parent = &clk_mout_d1sync.clk, -}; - -static struct clk clk_pclkd0 = { - .name = "pclkd0", - .id = -1, - .parent = &clk_hclkd0, -}; - -static struct clk clk_pclkd1 = { - .name = "pclkd1", - .id = -1, - .parent = &clk_hclkd1, -}; - -int s5p6442_clk_ip0_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP0, clk, enable); -} - -int s5p6442_clk_ip3_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(S5P_CLKGATE_IP3, clk, enable); -} - -static struct clksrc_clk clksrcs[] = { - { - .clk = { - .name = "dout_a2m", - .id = -1, - .parent = &clk_mout_apll.clk, - }, - .sources = &clk_src_apll, - .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 }, - }, { - .clk = { - .name = "dout_apll", - .id = -1, - .parent = &clk_mout_arm.clk, - }, - .sources = &clk_src_arm, - .reg_src = { .reg = S5P_CLK_MUX_STAT0, .shift = 16, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 3 }, - }, { - .clk = { - .name = "hclkd1", - .id = -1, - .parent = &clk_mout_d1sync.clk, - }, - .sources = &clk_src_d1sync, - .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 24, .size = 4 }, - }, { - .clk = { - .name = "hclkd0", - .id = -1, - .parent = &clk_mout_d0sync.clk, - }, - .sources = &clk_src_d0sync, - .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 16, .size = 4 }, - }, { - .clk = { - .name = "pclkd0", - .id = -1, - .parent = &clk_hclkd0, - }, - .sources = &clk_src_d0sync, - .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 28, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 20, .size = 3 }, - }, { - .clk = { - .name = "pclkd1", - .id = -1, - .parent = &clk_hclkd1, - }, - .sources = &clk_src_d1sync, - .reg_src = { .reg = S5P_CLK_MUX_STAT1, .shift = 24, .size = 3 }, - .reg_div = { .reg = S5P_CLK_DIV0, .shift = 28, .size = 3 }, - } -}; - -/* Clock initialisation code */ -static struct clksrc_clk *init_parents[] = { - &clk_mout_apll, - &clk_mout_mpll, - &clk_mout_epll, - &clk_mout_arm, - &clk_mout_d0, - &clk_mout_d0sync, - &clk_mout_d1, - &clk_mout_d1sync, -}; - -void __init_or_cpufreq s5p6442_setup_clocks(void) -{ - struct clk *pclkd0_clk; - struct clk *pclkd1_clk; - - unsigned long xtal; - unsigned long arm; - unsigned long hclkd0 = 0; - unsigned long hclkd1 = 0; - unsigned long pclkd0 = 0; - unsigned long pclkd1 = 0; - - unsigned long apll; - unsigned long mpll; - unsigned long epll; - unsigned int ptr; - - printk(KERN_DEBUG "%s: registering clocks\n", __func__); - - xtal = clk_get_rate(&clk_xtal); - - printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); - - apll = s5p_get_pll45xx(xtal, __raw_readl(S5P_APLL_CON), pll_4508); - mpll = s5p_get_pll45xx(xtal, __raw_readl(S5P_MPLL_CON), pll_4502); - epll = s5p_get_pll45xx(xtal, __raw_readl(S5P_EPLL_CON), pll_4500); - - printk(KERN_INFO "S5P6442: PLL settings, A=%ld, M=%ld, E=%ld", - apll, mpll, epll); - - clk_fout_apll.rate = apll; - clk_fout_mpll.rate = mpll; - clk_fout_epll.rate = epll; - - for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++) - s3c_set_clksrc(init_parents[ptr], true); - - for (ptr = 0; ptr < ARRAY_SIZE(clksrcs); ptr++) - s3c_set_clksrc(&clksrcs[ptr], true); - - arm = clk_get_rate(&clk_dout_apll); - hclkd0 = clk_get_rate(&clk_hclkd0); - hclkd1 = clk_get_rate(&clk_hclkd1); - - pclkd0_clk = clk_get(NULL, "pclkd0"); - BUG_ON(IS_ERR(pclkd0_clk)); - - pclkd0 = clk_get_rate(pclkd0_clk); - clk_put(pclkd0_clk); - - pclkd1_clk = clk_get(NULL, "pclkd1"); - BUG_ON(IS_ERR(pclkd1_clk)); - - pclkd1 = clk_get_rate(pclkd1_clk); - clk_put(pclkd1_clk); - - printk(KERN_INFO "S5P6442: HCLKD0=%ld, HCLKD1=%ld, PCLKD0=%ld, PCLKD1=%ld\n", - hclkd0, hclkd1, pclkd0, pclkd1); - - /* For backward compatibility */ - clk_f.rate = arm; - clk_h.rate = hclkd1; - clk_p.rate = pclkd1; - - clk_pclkd0.rate = pclkd0; - clk_pclkd1.rate = pclkd1; -} - -static struct clk init_clocks_off[] = { - { - .name = "pdma", - .id = -1, - .parent = &clk_pclkd1, - .enable = s5p6442_clk_ip0_ctrl, - .ctrlbit = (1 << 3), - }, -}; - -static struct clk init_clocks[] = { - { - .name = "systimer", - .id = -1, - .parent = &clk_pclkd1, - .enable = s5p6442_clk_ip3_ctrl, - .ctrlbit = (1<<16), - }, { - .name = "uart", - .id = 0, - .parent = &clk_pclkd1, - .enable = s5p6442_clk_ip3_ctrl, - .ctrlbit = (1<<17), - }, { - .name = "uart", - .id = 1, - .parent = &clk_pclkd1, - .enable = s5p6442_clk_ip3_ctrl, - .ctrlbit = (1<<18), - }, { - .name = "uart", - .id = 2, - .parent = &clk_pclkd1, - .enable = s5p6442_clk_ip3_ctrl, - .ctrlbit = (1<<19), - }, { - .name = "watchdog", - .id = -1, - .parent = &clk_pclkd1, - .enable = s5p6442_clk_ip3_ctrl, - .ctrlbit = (1 << 22), - }, { - .name = "timers", - .id = -1, - .parent = &clk_pclkd1, - .enable = s5p6442_clk_ip3_ctrl, - .ctrlbit = (1<<23), - }, -}; - -static struct clk *clks[] __initdata = { - &clk_ext, - &clk_epll, - &clk_mout_apll.clk, - &clk_mout_mpll.clk, - &clk_mout_epll.clk, - &clk_mout_d0.clk, - &clk_mout_d0sync.clk, - &clk_mout_d1.clk, - &clk_mout_d1sync.clk, - &clk_hclkd0, - &clk_pclkd0, - &clk_hclkd1, - &clk_pclkd1, -}; - -void __init s5p6442_register_clocks(void) -{ - s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); - - s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); - s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); - - s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); - - s3c_pwmclk_init(); -} diff --git a/arch/arm/mach-s5p6442/cpu.c b/arch/arm/mach-s5p6442/cpu.c deleted file mode 100644 index 842af86..0000000 --- a/arch/arm/mach-s5p6442/cpu.c +++ /dev/null @@ -1,143 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/cpu.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/timer.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/sysdev.h> -#include <linux/serial_core.h> -#include <linux/platform_device.h> -#include <linux/sched.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/mach/irq.h> - -#include <asm/proc-fns.h> - -#include <mach/hardware.h> -#include <mach/map.h> -#include <asm/irq.h> - -#include <plat/regs-serial.h> -#include <mach/regs-clock.h> - -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/clock.h> -#include <plat/s5p6442.h> - -/* Initial IO mappings */ - -static struct map_desc s5p6442_iodesc[] __initdata = { - { - .virtual = (unsigned long)S5P_VA_SYSTIMER, - .pfn = __phys_to_pfn(S5P6442_PA_SYSTIMER), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S5P_VA_GPIO, - .pfn = __phys_to_pfn(S5P6442_PA_GPIO), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC0, - .pfn = __phys_to_pfn(S5P6442_PA_VIC0), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC1, - .pfn = __phys_to_pfn(S5P6442_PA_VIC1), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)VA_VIC2, - .pfn = __phys_to_pfn(S5P6442_PA_VIC2), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = (unsigned long)S3C_VA_UART, - .pfn = __phys_to_pfn(S3C_PA_UART), - .length = SZ_512K, - .type = MT_DEVICE, - } -}; - -static void s5p6442_idle(void) -{ - if (!need_resched()) - cpu_do_idle(); - - local_irq_enable(); -} - -/* - * s5p6442_map_io - * - * register the standard cpu IO areas - */ - -void __init s5p6442_map_io(void) -{ - iotable_init(s5p6442_iodesc, ARRAY_SIZE(s5p6442_iodesc)); -} - -void __init s5p6442_init_clocks(int xtal) -{ - printk(KERN_DEBUG "%s: initializing clocks\n", __func__); - - s3c24xx_register_baseclocks(xtal); - s5p_register_clocks(xtal); - s5p6442_register_clocks(); - s5p6442_setup_clocks(); -} - -void __init s5p6442_init_irq(void) -{ - /* S5P6442 supports 3 VIC */ - u32 vic[3]; - - /* VIC0, VIC1, and VIC2: some interrupt reserved */ - vic[0] = 0x7fefffff; - vic[1] = 0X7f389c81; - vic[2] = 0X1bbbcfff; - - s5p_init_irq(vic, ARRAY_SIZE(vic)); -} - -struct sysdev_class s5p6442_sysclass = { - .name = "s5p6442-core", -}; - -static struct sys_device s5p6442_sysdev = { - .cls = &s5p6442_sysclass, -}; - -static int __init s5p6442_core_init(void) -{ - return sysdev_class_register(&s5p6442_sysclass); -} - -core_initcall(s5p6442_core_init); - -int __init s5p6442_init(void) -{ - printk(KERN_INFO "S5P6442: Initializing architecture\n"); - - /* set idle function */ - pm_idle = s5p6442_idle; - - return sysdev_register(&s5p6442_sysdev); -} diff --git a/arch/arm/mach-s5p6442/dev-audio.c b/arch/arm/mach-s5p6442/dev-audio.c deleted file mode 100644 index 8719dc4..0000000 --- a/arch/arm/mach-s5p6442/dev-audio.c +++ /dev/null @@ -1,217 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/dev-audio.c - * - * Copyright (c) 2010 Samsung Electronics Co. Ltd - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/gpio.h> - -#include <plat/gpio-cfg.h> -#include <plat/audio.h> - -#include <mach/map.h> -#include <mach/dma.h> -#include <mach/irqs.h> - -static int s5p6442_cfg_i2s(struct platform_device *pdev) -{ - unsigned int base; - - /* configure GPIO for i2s port */ - switch (pdev->id) { - case 1: - base = S5P6442_GPC1(0); - break; - - case 0: - base = S5P6442_GPC0(0); - break; - - default: - printk(KERN_ERR "Invalid Device %d\n", pdev->id); - return -EINVAL; - } - - s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(2)); - return 0; -} - -static const char *rclksrc_v35[] = { - [0] = "busclk", - [1] = "i2sclk", -}; - -static struct s3c_audio_pdata i2sv35_pdata = { - .cfg_gpio = s5p6442_cfg_i2s, - .type = { - .i2s = { - .quirks = QUIRK_SEC_DAI | QUIRK_NEED_RSTCLR, - .src_clk = rclksrc_v35, - }, - }, -}; - -static struct resource s5p6442_iis0_resource[] = { - [0] = { - .start = S5P6442_PA_I2S0, - .end = S5P6442_PA_I2S0 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_I2S0_TX, - .end = DMACH_I2S0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_I2S0_RX, - .end = DMACH_I2S0_RX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = DMACH_I2S0S_TX, - .end = DMACH_I2S0S_TX, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device s5p6442_device_iis0 = { - .name = "samsung-i2s", - .id = 0, - .num_resources = ARRAY_SIZE(s5p6442_iis0_resource), - .resource = s5p6442_iis0_resource, - .dev = { - .platform_data = &i2sv35_pdata, - }, -}; - -static const char *rclksrc_v3[] = { - [0] = "iis", - [1] = "sclk_audio", -}; - -static struct s3c_audio_pdata i2sv3_pdata = { - .cfg_gpio = s5p6442_cfg_i2s, - .type = { - .i2s = { - .src_clk = rclksrc_v3, - }, - }, -}; - -static struct resource s5p6442_iis1_resource[] = { - [0] = { - .start = S5P6442_PA_I2S1, - .end = S5P6442_PA_I2S1 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_I2S1_TX, - .end = DMACH_I2S1_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_I2S1_RX, - .end = DMACH_I2S1_RX, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device s5p6442_device_iis1 = { - .name = "samsung-i2s", - .id = 1, - .num_resources = ARRAY_SIZE(s5p6442_iis1_resource), - .resource = s5p6442_iis1_resource, - .dev = { - .platform_data = &i2sv3_pdata, - }, -}; - -/* PCM Controller platform_devices */ - -static int s5p6442_pcm_cfg_gpio(struct platform_device *pdev) -{ - unsigned int base; - - switch (pdev->id) { - case 0: - base = S5P6442_GPC0(0); - break; - - case 1: - base = S5P6442_GPC1(0); - break; - - default: - printk(KERN_DEBUG "Invalid PCM Controller number!"); - return -EINVAL; - } - - s3c_gpio_cfgpin_range(base, 5, S3C_GPIO_SFN(3)); - return 0; -} - -static struct s3c_audio_pdata s3c_pcm_pdata = { - .cfg_gpio = s5p6442_pcm_cfg_gpio, -}; - -static struct resource s5p6442_pcm0_resource[] = { - [0] = { - .start = S5P6442_PA_PCM0, - .end = S5P6442_PA_PCM0 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_PCM0_TX, - .end = DMACH_PCM0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_PCM0_RX, - .end = DMACH_PCM0_RX, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device s5p6442_device_pcm0 = { - .name = "samsung-pcm", - .id = 0, - .num_resources = ARRAY_SIZE(s5p6442_pcm0_resource), - .resource = s5p6442_pcm0_resource, - .dev = { - .platform_data = &s3c_pcm_pdata, - }, -}; - -static struct resource s5p6442_pcm1_resource[] = { - [0] = { - .start = S5P6442_PA_PCM1, - .end = S5P6442_PA_PCM1 + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_PCM1_TX, - .end = DMACH_PCM1_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_PCM1_RX, - .end = DMACH_PCM1_RX, - .flags = IORESOURCE_DMA, - }, -}; - -struct platform_device s5p6442_device_pcm1 = { - .name = "samsung-pcm", - .id = 1, - .num_resources = ARRAY_SIZE(s5p6442_pcm1_resource), - .resource = s5p6442_pcm1_resource, - .dev = { - .platform_data = &s3c_pcm_pdata, - }, -}; diff --git a/arch/arm/mach-s5p6442/dev-spi.c b/arch/arm/mach-s5p6442/dev-spi.c deleted file mode 100644 index cce8c24..0000000 --- a/arch/arm/mach-s5p6442/dev-spi.c +++ /dev/null @@ -1,121 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/dev-spi.c - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> -#include <linux/gpio.h> - -#include <mach/dma.h> -#include <mach/map.h> -#include <mach/irqs.h> -#include <mach/spi-clocks.h> - -#include <plat/s3c64xx-spi.h> -#include <plat/gpio-cfg.h> - -static char *spi_src_clks[] = { - [S5P6442_SPI_SRCCLK_PCLK] = "pclk", - [S5P6442_SPI_SRCCLK_SCLK] = "spi_epll", -}; - -/* SPI Controller platform_devices */ - -/* Since we emulate multi-cs capability, we do not touch the CS. - * The emulated CS is toggled by board specific mechanism, as it can - * be either some immediate GPIO or some signal out of some other - * chip in between ... or some yet another way. - * We simply do not assume anything about CS. - */ -static int s5p6442_spi_cfg_gpio(struct platform_device *pdev) -{ - switch (pdev->id) { - case 0: - s3c_gpio_cfgpin(S5P6442_GPB(0), S3C_GPIO_SFN(2)); - s3c_gpio_setpull(S5P6442_GPB(0), S3C_GPIO_PULL_UP); - s3c_gpio_cfgall_range(S5P6442_GPB(2), 2, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); - break; - - default: - dev_err(&pdev->dev, "Invalid SPI Controller number!"); - return -EINVAL; - } - - return 0; -} - -static struct resource s5p6442_spi0_resource[] = { - [0] = { - .start = S5P6442_PA_SPI, - .end = S5P6442_PA_SPI + 0x100 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = DMACH_SPI0_TX, - .end = DMACH_SPI0_TX, - .flags = IORESOURCE_DMA, - }, - [2] = { - .start = DMACH_SPI0_RX, - .end = DMACH_SPI0_RX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = IRQ_SPI0, - .end = IRQ_SPI0, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct s3c64xx_spi_info s5p6442_spi0_pdata = { - .cfg_gpio = s5p6442_spi_cfg_gpio, - .fifo_lvl_mask = 0x1ff, - .rx_lvl_offset = 15, -}; - -static u64 spi_dmamask = DMA_BIT_MASK(32); - -struct platform_device s5p6442_device_spi = { - .name = "s3c64xx-spi", - .id = 0, - .num_resources = ARRAY_SIZE(s5p6442_spi0_resource), - .resource = s5p6442_spi0_resource, - .dev = { - .dma_mask = &spi_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5p6442_spi0_pdata, - }, -}; - -void __init s5p6442_spi_set_info(int cntrlr, int src_clk_nr, int num_cs) -{ - struct s3c64xx_spi_info *pd; - - /* Reject invalid configuration */ - if (!num_cs || src_clk_nr < 0 - || src_clk_nr > S5P6442_SPI_SRCCLK_SCLK) { - printk(KERN_ERR "%s: Invalid SPI configuration\n", __func__); - return; - } - - switch (cntrlr) { - case 0: - pd = &s5p6442_spi0_pdata; - break; - default: - printk(KERN_ERR "%s: Invalid SPI controller(%d)\n", - __func__, cntrlr); - return; - } - - pd->num_cs = num_cs; - pd->src_clk_nr = src_clk_nr; - pd->src_clk_name = spi_src_clks[src_clk_nr]; -} diff --git a/arch/arm/mach-s5p6442/dma.c b/arch/arm/mach-s5p6442/dma.c deleted file mode 100644 index 7dfb136..0000000 --- a/arch/arm/mach-s5p6442/dma.c +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include <linux/platform_device.h> -#include <linux/dma-mapping.h> - -#include <plat/devs.h> -#include <plat/irqs.h> - -#include <mach/map.h> -#include <mach/irqs.h> - -#include <plat/s3c-pl330-pdata.h> - -static u64 dma_dmamask = DMA_BIT_MASK(32); - -static struct resource s5p6442_pdma_resource[] = { - [0] = { - .start = S5P6442_PA_PDMA, - .end = S5P6442_PA_PDMA + SZ_4K, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PDMA, - .end = IRQ_PDMA, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct s3c_pl330_platdata s5p6442_pdma_pdata = { - .peri = { - [0] = DMACH_UART0_RX, - [1] = DMACH_UART0_TX, - [2] = DMACH_UART1_RX, - [3] = DMACH_UART1_TX, - [4] = DMACH_UART2_RX, - [5] = DMACH_UART2_TX, - [6] = DMACH_MAX, - [7] = DMACH_MAX, - [8] = DMACH_MAX, - [9] = DMACH_I2S0_RX, - [10] = DMACH_I2S0_TX, - [11] = DMACH_I2S0S_TX, - [12] = DMACH_I2S1_RX, - [13] = DMACH_I2S1_TX, - [14] = DMACH_MAX, - [15] = DMACH_MAX, - [16] = DMACH_SPI0_RX, - [17] = DMACH_SPI0_TX, - [18] = DMACH_MAX, - [19] = DMACH_MAX, - [20] = DMACH_PCM0_RX, - [21] = DMACH_PCM0_TX, - [22] = DMACH_PCM1_RX, - [23] = DMACH_PCM1_TX, - [24] = DMACH_MAX, - [25] = DMACH_MAX, - [26] = DMACH_MAX, - [27] = DMACH_MSM_REQ0, - [28] = DMACH_MSM_REQ1, - [29] = DMACH_MSM_REQ2, - [30] = DMACH_MSM_REQ3, - [31] = DMACH_MAX, - }, -}; - -static struct platform_device s5p6442_device_pdma = { - .name = "s3c-pl330", - .id = -1, - .num_resources = ARRAY_SIZE(s5p6442_pdma_resource), - .resource = s5p6442_pdma_resource, - .dev = { - .dma_mask = &dma_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &s5p6442_pdma_pdata, - }, -}; - -static struct platform_device *s5p6442_dmacs[] __initdata = { - &s5p6442_device_pdma, -}; - -static int __init s5p6442_dma_init(void) -{ - platform_add_devices(s5p6442_dmacs, ARRAY_SIZE(s5p6442_dmacs)); - - return 0; -} -arch_initcall(s5p6442_dma_init); diff --git a/arch/arm/mach-s5p6442/include/mach/debug-macro.S b/arch/arm/mach-s5p6442/include/mach/debug-macro.S deleted file mode 100644 index e2213205..0000000 --- a/arch/arm/mach-s5p6442/include/mach/debug-macro.S +++ /dev/null @@ -1,35 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/debug-macro.S - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* pull in the relevant register and map files. */ - -#include <mach/map.h> -#include <plat/regs-serial.h> - - .macro addruart, rp, rv - ldr \rp, = S3C_PA_UART - ldr \rv, = S3C_VA_UART -#if CONFIG_DEBUG_S3C_UART != 0 - add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART) - add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART) -#endif - .endm - -#define fifo_full fifo_full_s5pv210 -#define fifo_level fifo_level_s5pv210 - -/* include the reset of the code which will do the work, we're only - * compiling for a single cpu processor type so the default of s3c2440 - * will be fine with us. - */ - -#include <plat/debug-macro.S> diff --git a/arch/arm/mach-s5p6442/include/mach/dma.h b/arch/arm/mach-s5p6442/include/mach/dma.h deleted file mode 100644 index 81209eb..0000000 --- a/arch/arm/mach-s5p6442/include/mach/dma.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __MACH_DMA_H -#define __MACH_DMA_H - -/* This platform uses the common S3C DMA API driver for PL330 */ -#include <plat/s3c-dma-pl330.h> - -#endif /* __MACH_DMA_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/entry-macro.S b/arch/arm/mach-s5p6442/include/mach/entry-macro.S deleted file mode 100644 index 6d574ed..0000000 --- a/arch/arm/mach-s5p6442/include/mach/entry-macro.S +++ /dev/null @@ -1,48 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/entry-macro.S - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Low-level IRQ helper macros for the Samsung S5P6442 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <asm/hardware/vic.h> -#include <mach/map.h> -#include <plat/irqs.h> - - .macro disable_fiq - .endm - - .macro get_irqnr_preamble, base, tmp - ldr \base, =VA_VIC0 - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - @ check the vic0 - mov \irqnr, # S5P_IRQ_OFFSET + 31 - ldr \irqstat, [ \base, # VIC_IRQ_STATUS ] - teq \irqstat, #0 - - @ otherwise try vic1 - addeq \tmp, \base, #(VA_VIC1 - VA_VIC0) - addeq \irqnr, \irqnr, #32 - ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] - teqeq \irqstat, #0 - - @ otherwise try vic2 - addeq \tmp, \base, #(VA_VIC2 - VA_VIC0) - addeq \irqnr, \irqnr, #32 - ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] - teqeq \irqstat, #0 - - clzne \irqstat, \irqstat - subne \irqnr, \irqnr, \irqstat - .endm diff --git a/arch/arm/mach-s5p6442/include/mach/gpio.h b/arch/arm/mach-s5p6442/include/mach/gpio.h deleted file mode 100644 index b8715df..0000000 --- a/arch/arm/mach-s5p6442/include/mach/gpio.h +++ /dev/null @@ -1,123 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/gpio.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - GPIO lib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_GPIO_H -#define __ASM_ARCH_GPIO_H __FILE__ - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value -#define gpio_cansleep __gpio_cansleep -#define gpio_to_irq __gpio_to_irq - -/* GPIO bank sizes */ -#define S5P6442_GPIO_A0_NR (8) -#define S5P6442_GPIO_A1_NR (2) -#define S5P6442_GPIO_B_NR (4) -#define S5P6442_GPIO_C0_NR (5) -#define S5P6442_GPIO_C1_NR (5) -#define S5P6442_GPIO_D0_NR (2) -#define S5P6442_GPIO_D1_NR (6) -#define S5P6442_GPIO_E0_NR (8) -#define S5P6442_GPIO_E1_NR (5) -#define S5P6442_GPIO_F0_NR (8) -#define S5P6442_GPIO_F1_NR (8) -#define S5P6442_GPIO_F2_NR (8) -#define S5P6442_GPIO_F3_NR (6) -#define S5P6442_GPIO_G0_NR (7) -#define S5P6442_GPIO_G1_NR (7) -#define S5P6442_GPIO_G2_NR (7) -#define S5P6442_GPIO_H0_NR (8) -#define S5P6442_GPIO_H1_NR (8) -#define S5P6442_GPIO_H2_NR (8) -#define S5P6442_GPIO_H3_NR (8) -#define S5P6442_GPIO_J0_NR (8) -#define S5P6442_GPIO_J1_NR (6) -#define S5P6442_GPIO_J2_NR (8) -#define S5P6442_GPIO_J3_NR (8) -#define S5P6442_GPIO_J4_NR (5) - -/* GPIO bank numbers */ - -/* CONFIG_S3C_GPIO_SPACE allows the user to select extra - * space for debugging purposes so that any accidental - * change from one gpio bank to another can be caught. -*/ - -#define S5P6442_GPIO_NEXT(__gpio) \ - ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) - -enum s5p_gpio_number { - S5P6442_GPIO_A0_START = 0, - S5P6442_GPIO_A1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_A0), - S5P6442_GPIO_B_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_A1), - S5P6442_GPIO_C0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_B), - S5P6442_GPIO_C1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_C0), - S5P6442_GPIO_D0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_C1), - S5P6442_GPIO_D1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_D0), - S5P6442_GPIO_E0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_D1), - S5P6442_GPIO_E1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_E0), - S5P6442_GPIO_F0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_E1), - S5P6442_GPIO_F1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F0), - S5P6442_GPIO_F2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F1), - S5P6442_GPIO_F3_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F2), - S5P6442_GPIO_G0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_F3), - S5P6442_GPIO_G1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_G0), - S5P6442_GPIO_G2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_G1), - S5P6442_GPIO_H0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_G2), - S5P6442_GPIO_H1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H0), - S5P6442_GPIO_H2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H1), - S5P6442_GPIO_H3_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H2), - S5P6442_GPIO_J0_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_H3), - S5P6442_GPIO_J1_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J0), - S5P6442_GPIO_J2_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J1), - S5P6442_GPIO_J3_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J2), - S5P6442_GPIO_J4_START = S5P6442_GPIO_NEXT(S5P6442_GPIO_J3), -}; - -/* S5P6442 GPIO number definitions. */ -#define S5P6442_GPA0(_nr) (S5P6442_GPIO_A0_START + (_nr)) -#define S5P6442_GPA1(_nr) (S5P6442_GPIO_A1_START + (_nr)) -#define S5P6442_GPB(_nr) (S5P6442_GPIO_B_START + (_nr)) -#define S5P6442_GPC0(_nr) (S5P6442_GPIO_C0_START + (_nr)) -#define S5P6442_GPC1(_nr) (S5P6442_GPIO_C1_START + (_nr)) -#define S5P6442_GPD0(_nr) (S5P6442_GPIO_D0_START + (_nr)) -#define S5P6442_GPD1(_nr) (S5P6442_GPIO_D1_START + (_nr)) -#define S5P6442_GPE0(_nr) (S5P6442_GPIO_E0_START + (_nr)) -#define S5P6442_GPE1(_nr) (S5P6442_GPIO_E1_START + (_nr)) -#define S5P6442_GPF0(_nr) (S5P6442_GPIO_F0_START + (_nr)) -#define S5P6442_GPF1(_nr) (S5P6442_GPIO_F1_START + (_nr)) -#define S5P6442_GPF2(_nr) (S5P6442_GPIO_F2_START + (_nr)) -#define S5P6442_GPF3(_nr) (S5P6442_GPIO_F3_START + (_nr)) -#define S5P6442_GPG0(_nr) (S5P6442_GPIO_G0_START + (_nr)) -#define S5P6442_GPG1(_nr) (S5P6442_GPIO_G1_START + (_nr)) -#define S5P6442_GPG2(_nr) (S5P6442_GPIO_G2_START + (_nr)) -#define S5P6442_GPH0(_nr) (S5P6442_GPIO_H0_START + (_nr)) -#define S5P6442_GPH1(_nr) (S5P6442_GPIO_H1_START + (_nr)) -#define S5P6442_GPH2(_nr) (S5P6442_GPIO_H2_START + (_nr)) -#define S5P6442_GPH3(_nr) (S5P6442_GPIO_H3_START + (_nr)) -#define S5P6442_GPJ0(_nr) (S5P6442_GPIO_J0_START + (_nr)) -#define S5P6442_GPJ1(_nr) (S5P6442_GPIO_J1_START + (_nr)) -#define S5P6442_GPJ2(_nr) (S5P6442_GPIO_J2_START + (_nr)) -#define S5P6442_GPJ3(_nr) (S5P6442_GPIO_J3_START + (_nr)) -#define S5P6442_GPJ4(_nr) (S5P6442_GPIO_J4_START + (_nr)) - -/* the end of the S5P6442 specific gpios */ -#define S5P6442_GPIO_END (S5P6442_GPJ4(S5P6442_GPIO_J4_NR) + 1) -#define S3C_GPIO_END S5P6442_GPIO_END - -/* define the number of gpios we need to the one after the GPJ4() range */ -#define ARCH_NR_GPIOS (S5P6442_GPJ4(S5P6442_GPIO_J4_NR) + \ - CONFIG_SAMSUNG_GPIO_EXTRA + 1) - -#include <asm-generic/gpio.h> - -#endif /* __ASM_ARCH_GPIO_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/hardware.h b/arch/arm/mach-s5p6442/include/mach/hardware.h deleted file mode 100644 index 8cd7b67..0000000 --- a/arch/arm/mach-s5p6442/include/mach/hardware.h +++ /dev/null @@ -1,18 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/hardware.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - Hardware support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H __FILE__ - -/* currently nothing here, placeholder */ - -#endif /* __ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/io.h b/arch/arm/mach-s5p6442/include/mach/io.h deleted file mode 100644 index 5d2195a..0000000 --- a/arch/arm/mach-s5p6442/include/mach/io.h +++ /dev/null @@ -1,17 +0,0 @@ -/* arch/arm/mach-s5p6442/include/mach/io.h - * - * Copyright 2008-2010 Ben Dooks <ben-linux@fluff.org> - * - * Default IO routines for S5P6442 - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -/* No current ISA/PCI bus support. */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#define IO_SPACE_LIMIT (0xFFFFFFFF) - -#endif diff --git a/arch/arm/mach-s5p6442/include/mach/irqs.h b/arch/arm/mach-s5p6442/include/mach/irqs.h deleted file mode 100644 index 3fbc6c3..0000000 --- a/arch/arm/mach-s5p6442/include/mach/irqs.h +++ /dev/null @@ -1,87 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/irqs.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - IRQ definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H __FILE__ - -#include <plat/irqs.h> - -/* VIC0 */ -#define IRQ_EINT16_31 S5P_IRQ_VIC0(16) -#define IRQ_BATF S5P_IRQ_VIC0(17) -#define IRQ_MDMA S5P_IRQ_VIC0(18) -#define IRQ_PDMA S5P_IRQ_VIC0(19) -#define IRQ_TIMER0_VIC S5P_IRQ_VIC0(21) -#define IRQ_TIMER1_VIC S5P_IRQ_VIC0(22) -#define IRQ_TIMER2_VIC S5P_IRQ_VIC0(23) -#define IRQ_TIMER3_VIC S5P_IRQ_VIC0(24) -#define IRQ_TIMER4_VIC S5P_IRQ_VIC0(25) -#define IRQ_SYSTIMER S5P_IRQ_VIC0(26) -#define IRQ_WDT S5P_IRQ_VIC0(27) -#define IRQ_RTC_ALARM S5P_IRQ_VIC0(28) -#define IRQ_RTC_TIC S5P_IRQ_VIC0(29) -#define IRQ_GPIOINT S5P_IRQ_VIC0(30) - -/* VIC1 */ -#define IRQ_PMU S5P_IRQ_VIC1(0) -#define IRQ_ONENAND S5P_IRQ_VIC1(7) -#define IRQ_UART0 S5P_IRQ_VIC1(10) -#define IRQ_UART1 S5P_IRQ_VIC1(11) -#define IRQ_UART2 S5P_IRQ_VIC1(12) -#define IRQ_SPI0 S5P_IRQ_VIC1(15) -#define IRQ_IIC S5P_IRQ_VIC1(19) -#define IRQ_IIC1 S5P_IRQ_VIC1(20) -#define IRQ_IIC2 S5P_IRQ_VIC1(21) -#define IRQ_OTG S5P_IRQ_VIC1(24) -#define IRQ_MSM S5P_IRQ_VIC1(25) -#define IRQ_HSMMC0 S5P_IRQ_VIC1(26) -#define IRQ_HSMMC1 S5P_IRQ_VIC1(27) -#define IRQ_HSMMC2 S5P_IRQ_VIC1(28) -#define IRQ_COMMRX S5P_IRQ_VIC1(29) -#define IRQ_COMMTX S5P_IRQ_VIC1(30) - -/* VIC2 */ -#define IRQ_LCD0 S5P_IRQ_VIC2(0) -#define IRQ_LCD1 S5P_IRQ_VIC2(1) -#define IRQ_LCD2 S5P_IRQ_VIC2(2) -#define IRQ_LCD3 S5P_IRQ_VIC2(3) -#define IRQ_ROTATOR S5P_IRQ_VIC2(4) -#define IRQ_FIMC0 S5P_IRQ_VIC2(5) -#define IRQ_FIMC1 S5P_IRQ_VIC2(6) -#define IRQ_FIMC2 S5P_IRQ_VIC2(7) -#define IRQ_JPEG S5P_IRQ_VIC2(8) -#define IRQ_3D S5P_IRQ_VIC2(10) -#define IRQ_Mixer S5P_IRQ_VIC2(11) -#define IRQ_MFC S5P_IRQ_VIC2(14) -#define IRQ_TVENC S5P_IRQ_VIC2(15) -#define IRQ_I2S0 S5P_IRQ_VIC2(16) -#define IRQ_I2S1 S5P_IRQ_VIC2(17) -#define IRQ_RP S5P_IRQ_VIC2(19) -#define IRQ_PCM0 S5P_IRQ_VIC2(20) -#define IRQ_PCM1 S5P_IRQ_VIC2(21) -#define IRQ_ADC S5P_IRQ_VIC2(23) -#define IRQ_PENDN S5P_IRQ_VIC2(24) -#define IRQ_KEYPAD S5P_IRQ_VIC2(25) -#define IRQ_SSS_INT S5P_IRQ_VIC2(27) -#define IRQ_SSS_HASH S5P_IRQ_VIC2(28) -#define IRQ_VIC_END S5P_IRQ_VIC2(31) - -#define S5P_IRQ_EINT_BASE (IRQ_VIC_END + 1) - -#define S5P_EINT_BASE1 (S5P_IRQ_VIC0(0)) -#define S5P_EINT_BASE2 (S5P_IRQ_EINT_BASE) - -/* Set the default NR_IRQS */ - -#define NR_IRQS (IRQ_EINT(31) + 1) - -#endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/map.h b/arch/arm/mach-s5p6442/include/mach/map.h deleted file mode 100644 index 058dab4..0000000 --- a/arch/arm/mach-s5p6442/include/mach/map.h +++ /dev/null @@ -1,76 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/map.h - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MAP_H -#define __ASM_ARCH_MAP_H __FILE__ - -#include <plat/map-base.h> -#include <plat/map-s5p.h> - -#define S5P6442_PA_SDRAM 0x20000000 - -#define S5P6442_PA_I2S0 0xC0B00000 -#define S5P6442_PA_I2S1 0xF2200000 - -#define S5P6442_PA_CHIPID 0xE0000000 - -#define S5P6442_PA_SYSCON 0xE0100000 - -#define S5P6442_PA_GPIO 0xE0200000 - -#define S5P6442_PA_VIC0 0xE4000000 -#define S5P6442_PA_VIC1 0xE4100000 -#define S5P6442_PA_VIC2 0xE4200000 - -#define S5P6442_PA_SROMC 0xE7000000 - -#define S5P6442_PA_MDMA 0xE8000000 -#define S5P6442_PA_PDMA 0xE9000000 - -#define S5P6442_PA_TIMER 0xEA000000 - -#define S5P6442_PA_SYSTIMER 0xEA100000 - -#define S5P6442_PA_WATCHDOG 0xEA200000 - -#define S5P6442_PA_UART 0xEC000000 - -#define S5P6442_PA_IIC0 0xEC100000 - -#define S5P6442_PA_SPI 0xEC300000 - -#define S5P6442_PA_PCM0 0xF2400000 -#define S5P6442_PA_PCM1 0xF2500000 - -/* Compatibiltiy Defines */ - -#define S3C_PA_IIC S5P6442_PA_IIC0 -#define S3C_PA_WDT S5P6442_PA_WATCHDOG - -#define S5P_PA_CHIPID S5P6442_PA_CHIPID -#define S5P_PA_SDRAM S5P6442_PA_SDRAM -#define S5P_PA_SROMC S5P6442_PA_SROMC -#define S5P_PA_SYSCON S5P6442_PA_SYSCON -#define S5P_PA_TIMER S5P6442_PA_TIMER - -/* UART */ - -#define S3C_PA_UART S5P6442_PA_UART - -#define S5P_PA_UART(x) (S3C_PA_UART + ((x) * S3C_UART_OFFSET)) -#define S5P_PA_UART0 S5P_PA_UART(0) -#define S5P_PA_UART1 S5P_PA_UART(1) -#define S5P_PA_UART2 S5P_PA_UART(2) - -#define S5P_SZ_UART SZ_256 - -#endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/memory.h b/arch/arm/mach-s5p6442/include/mach/memory.h deleted file mode 100644 index cfe259d..0000000 --- a/arch/arm/mach-s5p6442/include/mach/memory.h +++ /dev/null @@ -1,19 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/memory.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - Memory definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x20000000) -#define CONSISTENT_DMA_SIZE SZ_8M - -#endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/pwm-clock.h b/arch/arm/mach-s5p6442/include/mach/pwm-clock.h deleted file mode 100644 index 2724b37..0000000 --- a/arch/arm/mach-s5p6442/include/mach/pwm-clock.h +++ /dev/null @@ -1,70 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/pwm-clock.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h - * - * S5P6442 - pwm clock and timer support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_PWMCLK_H -#define __ASM_ARCH_PWMCLK_H __FILE__ - -/** - * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk - * @tcfg: The timer TCFG1 register bits shifted down to 0. - * - * Return true if the given configuration from TCFG1 is a TCLK instead - * any of the TDIV clocks. - */ -static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) -{ - return tcfg == S3C64XX_TCFG1_MUX_TCLK; -} - -/** - * tcfg_to_divisor() - convert tcfg1 setting to a divisor - * @tcfg1: The tcfg1 setting, shifted down. - * - * Get the divisor value for the given tcfg1 setting. We assume the - * caller has already checked to see if this is not a TCLK source. - */ -static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) -{ - return 1 << tcfg1; -} - -/** - * pwm_tdiv_has_div1() - does the tdiv setting have a /1 - * - * Return true if we have a /1 in the tdiv setting. - */ -static inline unsigned int pwm_tdiv_has_div1(void) -{ - return 1; -} - -/** - * pwm_tdiv_div_bits() - calculate TCFG1 divisor value. - * @div: The divisor to calculate the bit information for. - * - * Turn a divisor into the necessary bit field for TCFG1. - */ -static inline unsigned long pwm_tdiv_div_bits(unsigned int div) -{ - return ilog2(div); -} - -#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK - -#endif /* __ASM_ARCH_PWMCLK_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/regs-clock.h b/arch/arm/mach-s5p6442/include/mach/regs-clock.h deleted file mode 100644 index 00828a3..0000000 --- a/arch/arm/mach-s5p6442/include/mach/regs-clock.h +++ /dev/null @@ -1,104 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/regs-clock.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - Clock register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_CLOCK_H -#define __ASM_ARCH_REGS_CLOCK_H __FILE__ - -#include <mach/map.h> - -#define S5P_CLKREG(x) (S3C_VA_SYS + (x)) - -#define S5P_APLL_LOCK S5P_CLKREG(0x00) -#define S5P_MPLL_LOCK S5P_CLKREG(0x08) -#define S5P_EPLL_LOCK S5P_CLKREG(0x10) -#define S5P_VPLL_LOCK S5P_CLKREG(0x20) - -#define S5P_APLL_CON S5P_CLKREG(0x100) -#define S5P_MPLL_CON S5P_CLKREG(0x108) -#define S5P_EPLL_CON S5P_CLKREG(0x110) -#define S5P_VPLL_CON S5P_CLKREG(0x120) - -#define S5P_CLK_SRC0 S5P_CLKREG(0x200) -#define S5P_CLK_SRC1 S5P_CLKREG(0x204) -#define S5P_CLK_SRC2 S5P_CLKREG(0x208) -#define S5P_CLK_SRC3 S5P_CLKREG(0x20C) -#define S5P_CLK_SRC4 S5P_CLKREG(0x210) -#define S5P_CLK_SRC5 S5P_CLKREG(0x214) -#define S5P_CLK_SRC6 S5P_CLKREG(0x218) - -#define S5P_CLK_SRC_MASK0 S5P_CLKREG(0x280) -#define S5P_CLK_SRC_MASK1 S5P_CLKREG(0x284) - -#define S5P_CLK_DIV0 S5P_CLKREG(0x300) -#define S5P_CLK_DIV1 S5P_CLKREG(0x304) -#define S5P_CLK_DIV2 S5P_CLKREG(0x308) -#define S5P_CLK_DIV3 S5P_CLKREG(0x30C) -#define S5P_CLK_DIV4 S5P_CLKREG(0x310) -#define S5P_CLK_DIV5 S5P_CLKREG(0x314) -#define S5P_CLK_DIV6 S5P_CLKREG(0x318) - -#define S5P_CLKGATE_IP0 S5P_CLKREG(0x460) -#define S5P_CLKGATE_IP3 S5P_CLKREG(0x46C) - -/* CLK_OUT */ -#define S5P_CLK_OUT_SHIFT (12) -#define S5P_CLK_OUT_MASK (0x1F << S5P_CLK_OUT_SHIFT) -#define S5P_CLK_OUT S5P_CLKREG(0x500) - -#define S5P_CLK_DIV_STAT0 S5P_CLKREG(0x1000) -#define S5P_CLK_DIV_STAT1 S5P_CLKREG(0x1004) - -#define S5P_CLK_MUX_STAT0 S5P_CLKREG(0x1100) -#define S5P_CLK_MUX_STAT1 S5P_CLKREG(0x1104) - -#define S5P_MDNIE_SEL S5P_CLKREG(0x7008) - -/* Register Bit definition */ -#define S5P_EPLL_EN (1<<31) -#define S5P_EPLL_MASK 0xffffffff -#define S5P_EPLLVAL(_m, _p, _s) ((_m) << 16 | ((_p) << 8) | ((_s))) - -/* CLKDIV0 */ -#define S5P_CLKDIV0_APLL_SHIFT (0) -#define S5P_CLKDIV0_APLL_MASK (0x7 << S5P_CLKDIV0_APLL_SHIFT) -#define S5P_CLKDIV0_A2M_SHIFT (4) -#define S5P_CLKDIV0_A2M_MASK (0x7 << S5P_CLKDIV0_A2M_SHIFT) -#define S5P_CLKDIV0_D0CLK_SHIFT (16) -#define S5P_CLKDIV0_D0CLK_MASK (0xF << S5P_CLKDIV0_D0CLK_SHIFT) -#define S5P_CLKDIV0_P0CLK_SHIFT (20) -#define S5P_CLKDIV0_P0CLK_MASK (0x7 << S5P_CLKDIV0_P0CLK_SHIFT) -#define S5P_CLKDIV0_D1CLK_SHIFT (24) -#define S5P_CLKDIV0_D1CLK_MASK (0xF << S5P_CLKDIV0_D1CLK_SHIFT) -#define S5P_CLKDIV0_P1CLK_SHIFT (28) -#define S5P_CLKDIV0_P1CLK_MASK (0x7 << S5P_CLKDIV0_P1CLK_SHIFT) - -/* Clock MUX status Registers */ -#define S5P_CLK_MUX_STAT0_APLL_SHIFT (0) -#define S5P_CLK_MUX_STAT0_APLL_MASK (0x7 << S5P_CLK_MUX_STAT0_APLL_SHIFT) -#define S5P_CLK_MUX_STAT0_MPLL_SHIFT (4) -#define S5P_CLK_MUX_STAT0_MPLL_MASK (0x7 << S5P_CLK_MUX_STAT0_MPLL_SHIFT) -#define S5P_CLK_MUX_STAT0_EPLL_SHIFT (8) -#define S5P_CLK_MUX_STAT0_EPLL_MASK (0x7 << S5P_CLK_MUX_STAT0_EPLL_SHIFT) -#define S5P_CLK_MUX_STAT0_VPLL_SHIFT (12) -#define S5P_CLK_MUX_STAT0_VPLL_MASK (0x7 << S5P_CLK_MUX_STAT0_VPLL_SHIFT) -#define S5P_CLK_MUX_STAT0_MUXARM_SHIFT (16) -#define S5P_CLK_MUX_STAT0_MUXARM_MASK (0x7 << S5P_CLK_MUX_STAT0_MUXARM_SHIFT) -#define S5P_CLK_MUX_STAT0_MUXD0_SHIFT (20) -#define S5P_CLK_MUX_STAT0_MUXD0_MASK (0x7 << S5P_CLK_MUX_STAT0_MUXD0_SHIFT) -#define S5P_CLK_MUX_STAT0_MUXD1_SHIFT (24) -#define S5P_CLK_MUX_STAT0_MUXD1_MASK (0x7 << S5P_CLK_MUX_STAT0_MUXD1_SHIFT) -#define S5P_CLK_MUX_STAT1_D1SYNC_SHIFT (24) -#define S5P_CLK_MUX_STAT1_D1SYNC_MASK (0x7 << S5P_CLK_MUX_STAT1_D1SYNC_SHIFT) -#define S5P_CLK_MUX_STAT1_D0SYNC_SHIFT (28) -#define S5P_CLK_MUX_STAT1_D0SYNC_MASK (0x7 << S5P_CLK_MUX_STAT1_D0SYNC_SHIFT) - -#endif /* __ASM_ARCH_REGS_CLOCK_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/regs-irq.h b/arch/arm/mach-s5p6442/include/mach/regs-irq.h deleted file mode 100644 index 73782b5..0000000 --- a/arch/arm/mach-s5p6442/include/mach/regs-irq.h +++ /dev/null @@ -1,19 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/regs-irq.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - IRQ register definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_IRQ_H -#define __ASM_ARCH_REGS_IRQ_H __FILE__ - -#include <asm/hardware/vic.h> -#include <mach/map.h> - -#endif /* __ASM_ARCH_REGS_IRQ_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/spi-clocks.h b/arch/arm/mach-s5p6442/include/mach/spi-clocks.h deleted file mode 100644 index 7fd8820..0000000 --- a/arch/arm/mach-s5p6442/include/mach/spi-clocks.h +++ /dev/null @@ -1,17 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/spi-clocks.h - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __S5P6442_PLAT_SPI_CLKS_H -#define __S5P6442_PLAT_SPI_CLKS_H __FILE__ - -#define S5P6442_SPI_SRCCLK_PCLK 0 -#define S5P6442_SPI_SRCCLK_SCLK 1 - -#endif /* __S5P6442_PLAT_SPI_CLKS_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/system.h b/arch/arm/mach-s5p6442/include/mach/system.h deleted file mode 100644 index c30c1cc..0000000 --- a/arch/arm/mach-s5p6442/include/mach/system.h +++ /dev/null @@ -1,23 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/system.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - system support header - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H __FILE__ - -#include <plat/system-reset.h> - -static void arch_idle(void) -{ - /* nothing here yet */ -} - -#endif /* __ASM_ARCH_SYSTEM_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/tick.h b/arch/arm/mach-s5p6442/include/mach/tick.h deleted file mode 100644 index e1d4cab..0000000 --- a/arch/arm/mach-s5p6442/include/mach/tick.h +++ /dev/null @@ -1,26 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/tick.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Based on arch/arm/mach-s3c6400/include/mach/tick.h - * - * S5P6442 - Timer tick support definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TICK_H -#define __ASM_ARCH_TICK_H __FILE__ - -static inline u32 s3c24xx_ostimer_pending(void) -{ - u32 pend = __raw_readl(VA_VIC0 + VIC_RAW_STATUS); - return pend & (1 << (IRQ_TIMER4_VIC - S5P_IRQ_VIC0(0))); -} - -#define TICK_MAX (0xffffffff) - -#endif /* __ASM_ARCH_TICK_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/timex.h b/arch/arm/mach-s5p6442/include/mach/timex.h deleted file mode 100644 index ff8f2fc..0000000 --- a/arch/arm/mach-s5p6442/include/mach/timex.h +++ /dev/null @@ -1,24 +0,0 @@ -/* arch/arm/mach-s5p6442/include/mach/timex.h - * - * Copyright (c) 2003-2010 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S5P6442 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -/* CLOCK_TICK_RATE needs to be evaluatable by the cpp, so making it - * a variable is useless. It seems as long as we make our timers an - * exact multiple of HZ, any value that makes a 1->1 correspondence - * for the time conversion functions to/from jiffies is acceptable. -*/ - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/uncompress.h b/arch/arm/mach-s5p6442/include/mach/uncompress.h deleted file mode 100644 index 5ac7cbe..0000000 --- a/arch/arm/mach-s5p6442/include/mach/uncompress.h +++ /dev/null @@ -1,24 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/include/mach/uncompress.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * S5P6442 - uncompress code - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_UNCOMPRESS_H -#define __ASM_ARCH_UNCOMPRESS_H - -#include <mach/map.h> -#include <plat/uncompress.h> - -static void arch_detect_cpu(void) -{ - /* we do not need to do any cpu detection here at the moment. */ -} - -#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-s5p6442/include/mach/vmalloc.h b/arch/arm/mach-s5p6442/include/mach/vmalloc.h deleted file mode 100644 index 4aa55e5..0000000 --- a/arch/arm/mach-s5p6442/include/mach/vmalloc.h +++ /dev/null @@ -1,17 +0,0 @@ -/* arch/arm/mach-s5p6442/include/mach/vmalloc.h - * - * Copyright 2010 Ben Dooks <ben-linux@fluff.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S5P6442 vmalloc definition -*/ - -#ifndef __ASM_ARCH_VMALLOC_H -#define __ASM_ARCH_VMALLOC_H - -#define VMALLOC_END 0xF6000000UL - -#endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-s5p6442/init.c b/arch/arm/mach-s5p6442/init.c deleted file mode 100644 index 1874bdb..0000000 --- a/arch/arm/mach-s5p6442/init.c +++ /dev/null @@ -1,44 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/s5p6442-init.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/serial_core.h> - -#include <plat/cpu.h> -#include <plat/devs.h> -#include <plat/s5p6442.h> -#include <plat/regs-serial.h> - -static struct s3c24xx_uart_clksrc s5p6442_serial_clocks[] = { - [0] = { - .name = "pclk", - .divisor = 1, - .min_baud = 0, - .max_baud = 0, - }, -}; - -/* uart registration process */ -void __init s5p6442_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - struct s3c2410_uartcfg *tcfg = cfg; - u32 ucnt; - - for (ucnt = 0; ucnt < no; ucnt++, tcfg++) { - if (!tcfg->clocks) { - tcfg->clocks = s5p6442_serial_clocks; - tcfg->clocks_size = ARRAY_SIZE(s5p6442_serial_clocks); - } - } - - s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no); -} diff --git a/arch/arm/mach-s5p6442/mach-smdk6442.c b/arch/arm/mach-s5p6442/mach-smdk6442.c deleted file mode 100644 index eaf6b9c..0000000 --- a/arch/arm/mach-s5p6442/mach-smdk6442.c +++ /dev/null @@ -1,102 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/mach-smdk6442.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/serial_core.h> -#include <linux/i2c.h> - -#include <asm/mach/arch.h> -#include <asm/mach/map.h> -#include <asm/setup.h> -#include <asm/mach-types.h> - -#include <mach/map.h> -#include <mach/regs-clock.h> - -#include <plat/regs-serial.h> -#include <plat/s5p6442.h> -#include <plat/devs.h> -#include <plat/cpu.h> -#include <plat/iic.h> - -/* Following are default values for UCON, ULCON and UFCON UART registers */ -#define SMDK6442_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ - S3C2410_UCON_RXILEVEL | \ - S3C2410_UCON_TXIRQMODE | \ - S3C2410_UCON_RXIRQMODE | \ - S3C2410_UCON_RXFIFO_TOI | \ - S3C2443_UCON_RXERR_IRQEN) - -#define SMDK6442_ULCON_DEFAULT S3C2410_LCON_CS8 - -#define SMDK6442_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \ - S5PV210_UFCON_TXTRIG4 | \ - S5PV210_UFCON_RXTRIG4) - -static struct s3c2410_uartcfg smdk6442_uartcfgs[] __initdata = { - [0] = { - .hwport = 0, - .flags = 0, - .ucon = SMDK6442_UCON_DEFAULT, - .ulcon = SMDK6442_ULCON_DEFAULT, - .ufcon = SMDK6442_UFCON_DEFAULT, - }, - [1] = { - .hwport = 1, - .flags = 0, - .ucon = SMDK6442_UCON_DEFAULT, - .ulcon = SMDK6442_ULCON_DEFAULT, - .ufcon = SMDK6442_UFCON_DEFAULT, - }, - [2] = { - .hwport = 2, - .flags = 0, - .ucon = SMDK6442_UCON_DEFAULT, - .ulcon = SMDK6442_ULCON_DEFAULT, - .ufcon = SMDK6442_UFCON_DEFAULT, - }, -}; - -static struct platform_device *smdk6442_devices[] __initdata = { - &s3c_device_i2c0, - &samsung_asoc_dma, - &s5p6442_device_iis0, - &s3c_device_wdt, -}; - -static struct i2c_board_info smdk6442_i2c_devs0[] __initdata = { - { I2C_BOARD_INFO("wm8580", 0x1b), }, -}; - -static void __init smdk6442_map_io(void) -{ - s5p_init_io(NULL, 0, S5P_VA_CHIPID); - s3c24xx_init_clocks(12000000); - s3c24xx_init_uarts(smdk6442_uartcfgs, ARRAY_SIZE(smdk6442_uartcfgs)); -} - -static void __init smdk6442_machine_init(void) -{ - s3c_i2c0_set_platdata(NULL); - i2c_register_board_info(0, smdk6442_i2c_devs0, - ARRAY_SIZE(smdk6442_i2c_devs0)); - platform_add_devices(smdk6442_devices, ARRAY_SIZE(smdk6442_devices)); -} - -MACHINE_START(SMDK6442, "SMDK6442") - /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */ - .boot_params = S5P_PA_SDRAM + 0x100, - .init_irq = s5p6442_init_irq, - .map_io = smdk6442_map_io, - .init_machine = smdk6442_machine_init, - .timer = &s3c24xx_timer, -MACHINE_END diff --git a/arch/arm/mach-s5p6442/setup-i2c0.c b/arch/arm/mach-s5p6442/setup-i2c0.c deleted file mode 100644 index aad8565..0000000 --- a/arch/arm/mach-s5p6442/setup-i2c0.c +++ /dev/null @@ -1,28 +0,0 @@ -/* linux/arch/arm/mach-s5p6442/setup-i2c0.c - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * I2C0 GPIO configuration. - * - * Based on plat-s3c64xx/setup-i2c0.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/gpio.h> - -struct platform_device; /* don't need the contents */ - -#include <plat/gpio-cfg.h> -#include <plat/iic.h> - -void s3c_i2c0_cfg_gpio(struct platform_device *dev) -{ - s3c_gpio_cfgall_range(S5P6442_GPD1(0), 2, - S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP); -} diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index bf0b024..7c6cb4fa 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -99,8 +99,11 @@ static void sdi0_configure(void) gpio_direction_output(sdi0_vsel, 0); gpio_direction_output(sdi0_en, 1); - /* Add the device */ - db8500_add_sdi0(&mop500_sdi0_data); + /* Add the device, force v2 to subrevision 1 */ + if (cpu_is_u8500v2()) + db8500_add_sdi0(&mop500_sdi0_data, 0x10480180); + else + db8500_add_sdi0(&mop500_sdi0_data, 0); } void mop500_sdi_tc35892_init(void) @@ -188,13 +191,18 @@ static struct mmci_platform_data mop500_sdi4_data = { void __init mop500_sdi_init(void) { + u32 periphid = 0; + + /* v2 has a new version of this block that need to be forced */ + if (cpu_is_u8500v2()) + periphid = 0x10480180; /* PoP:ed eMMC on top of DB8500 v1.0 has problems with high speed */ if (!cpu_is_u8500v10()) mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED; - db8500_add_sdi2(&mop500_sdi2_data); + db8500_add_sdi2(&mop500_sdi2_data, periphid); /* On-board eMMC */ - db8500_add_sdi4(&mop500_sdi4_data); + db8500_add_sdi4(&mop500_sdi4_data, periphid); if (machine_is_hrefv60()) { mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO; diff --git a/arch/arm/mach-ux500/devices-common.h b/arch/arm/mach-ux500/devices-common.h index c719b5a1..7825705 100644 --- a/arch/arm/mach-ux500/devices-common.h +++ b/arch/arm/mach-ux500/devices-common.h @@ -28,18 +28,20 @@ dbx500_add_msp_spi(const char *name, resource_size_t base, int irq, static inline struct amba_device * dbx500_add_spi(const char *name, resource_size_t base, int irq, - struct spi_master_cntlr *pdata) + struct spi_master_cntlr *pdata, + u32 periphid) { - return dbx500_add_amba_device(name, base, irq, pdata, 0); + return dbx500_add_amba_device(name, base, irq, pdata, periphid); } struct mmci_platform_data; static inline struct amba_device * dbx500_add_sdi(const char *name, resource_size_t base, int irq, - struct mmci_platform_data *pdata) + struct mmci_platform_data *pdata, + u32 periphid) { - return dbx500_add_amba_device(name, base, irq, pdata, 0); + return dbx500_add_amba_device(name, base, irq, pdata, periphid); } struct amba_pl011_data; diff --git a/arch/arm/mach-ux500/devices-db5500.h b/arch/arm/mach-ux500/devices-db5500.h index 94627f7..0c4bccd 100644 --- a/arch/arm/mach-ux500/devices-db5500.h +++ b/arch/arm/mach-ux500/devices-db5500.h @@ -38,24 +38,34 @@ ux500_add_usb(U5500_USBOTG_BASE, IRQ_DB5500_USBOTG, rx_cfg, tx_cfg) #define db5500_add_sdi0(pdata) \ - dbx500_add_sdi("sdi0", U5500_SDI0_BASE, IRQ_DB5500_SDMMC0, pdata) + dbx500_add_sdi("sdi0", U5500_SDI0_BASE, IRQ_DB5500_SDMMC0, pdata, \ + 0x10480180) #define db5500_add_sdi1(pdata) \ - dbx500_add_sdi("sdi1", U5500_SDI1_BASE, IRQ_DB5500_SDMMC1, pdata) + dbx500_add_sdi("sdi1", U5500_SDI1_BASE, IRQ_DB5500_SDMMC1, pdata, \ + 0x10480180) #define db5500_add_sdi2(pdata) \ - dbx500_add_sdi("sdi2", U5500_SDI2_BASE, IRQ_DB5500_SDMMC2, pdata) + dbx500_add_sdi("sdi2", U5500_SDI2_BASE, IRQ_DB5500_SDMMC2, pdata \ + 0x10480180) #define db5500_add_sdi3(pdata) \ - dbx500_add_sdi("sdi3", U5500_SDI3_BASE, IRQ_DB5500_SDMMC3, pdata) + dbx500_add_sdi("sdi3", U5500_SDI3_BASE, IRQ_DB5500_SDMMC3, pdata \ + 0x10480180) #define db5500_add_sdi4(pdata) \ - dbx500_add_sdi("sdi4", U5500_SDI4_BASE, IRQ_DB5500_SDMMC4, pdata) + dbx500_add_sdi("sdi4", U5500_SDI4_BASE, IRQ_DB5500_SDMMC4, pdata \ + 0x10480180) +/* This one has a bad peripheral ID in the U5500 silicon */ #define db5500_add_spi0(pdata) \ - dbx500_add_spi("spi0", U5500_SPI0_BASE, IRQ_DB5500_SPI0, pdata) + dbx500_add_spi("spi0", U5500_SPI0_BASE, IRQ_DB5500_SPI0, pdata, \ + 0x10080023) #define db5500_add_spi1(pdata) \ - dbx500_add_spi("spi1", U5500_SPI1_BASE, IRQ_DB5500_SPI1, pdata) + dbx500_add_spi("spi1", U5500_SPI1_BASE, IRQ_DB5500_SPI1, pdata, \ + 0x10080023) #define db5500_add_spi2(pdata) \ - dbx500_add_spi("spi2", U5500_SPI2_BASE, IRQ_DB5500_SPI2, pdata) + dbx500_add_spi("spi2", U5500_SPI2_BASE, IRQ_DB5500_SPI2, pdata \ + 0x10080023) #define db5500_add_spi3(pdata) \ - dbx500_add_spi("spi3", U5500_SPI3_BASE, IRQ_DB5500_SPI3, pdata) + dbx500_add_spi("spi3", U5500_SPI3_BASE, IRQ_DB5500_SPI3, pdata \ + 0x10080023) #define db5500_add_uart0(plat) \ dbx500_add_uart("uart0", U5500_UART0_BASE, IRQ_DB5500_UART0, plat) diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h index 9cc6f8f..cbd4a9a 100644 --- a/arch/arm/mach-ux500/devices-db8500.h +++ b/arch/arm/mach-ux500/devices-db8500.h @@ -25,7 +25,7 @@ static inline struct amba_device * db8500_add_ssp(const char *name, resource_size_t base, int irq, struct pl022_ssp_controller *pdata) { - return dbx500_add_amba_device(name, base, irq, pdata, SSP_PER_ID); + return dbx500_add_amba_device(name, base, irq, pdata, 0); } @@ -64,18 +64,18 @@ db8500_add_ssp(const char *name, resource_size_t base, int irq, #define db8500_add_usb(rx_cfg, tx_cfg) \ ux500_add_usb(U8500_USBOTG_BASE, IRQ_DB8500_USBOTG, rx_cfg, tx_cfg) -#define db8500_add_sdi0(pdata) \ - dbx500_add_sdi("sdi0", U8500_SDI0_BASE, IRQ_DB8500_SDMMC0, pdata) -#define db8500_add_sdi1(pdata) \ - dbx500_add_sdi("sdi1", U8500_SDI1_BASE, IRQ_DB8500_SDMMC1, pdata) -#define db8500_add_sdi2(pdata) \ - dbx500_add_sdi("sdi2", U8500_SDI2_BASE, IRQ_DB8500_SDMMC2, pdata) -#define db8500_add_sdi3(pdata) \ - dbx500_add_sdi("sdi3", U8500_SDI3_BASE, IRQ_DB8500_SDMMC3, pdata) -#define db8500_add_sdi4(pdata) \ - dbx500_add_sdi("sdi4", U8500_SDI4_BASE, IRQ_DB8500_SDMMC4, pdata) -#define db8500_add_sdi5(pdata) \ - dbx500_add_sdi("sdi5", U8500_SDI5_BASE, IRQ_DB8500_SDMMC5, pdata) +#define db8500_add_sdi0(pdata, pid) \ + dbx500_add_sdi("sdi0", U8500_SDI0_BASE, IRQ_DB8500_SDMMC0, pdata, pid) +#define db8500_add_sdi1(pdata, pid) \ + dbx500_add_sdi("sdi1", U8500_SDI1_BASE, IRQ_DB8500_SDMMC1, pdata, pid) +#define db8500_add_sdi2(pdata, pid) \ + dbx500_add_sdi("sdi2", U8500_SDI2_BASE, IRQ_DB8500_SDMMC2, pdata, pid) +#define db8500_add_sdi3(pdata, pid) \ + dbx500_add_sdi("sdi3", U8500_SDI3_BASE, IRQ_DB8500_SDMMC3, pdata, pid) +#define db8500_add_sdi4(pdata, pid) \ + dbx500_add_sdi("sdi4", U8500_SDI4_BASE, IRQ_DB8500_SDMMC4, pdata, pid) +#define db8500_add_sdi5(pdata, pid) \ + dbx500_add_sdi("sdi5", U8500_SDI5_BASE, IRQ_DB8500_SDMMC5, pdata, pid) #define db8500_add_ssp0(pdata) \ db8500_add_ssp("ssp0", U8500_SSP0_BASE, IRQ_DB8500_SSP0, pdata) @@ -83,13 +83,13 @@ db8500_add_ssp(const char *name, resource_size_t base, int irq, db8500_add_ssp("ssp1", U8500_SSP1_BASE, IRQ_DB8500_SSP1, pdata) #define db8500_add_spi0(pdata) \ - dbx500_add_spi("spi0", U8500_SPI0_BASE, IRQ_DB8500_SPI0, pdata) + dbx500_add_spi("spi0", U8500_SPI0_BASE, IRQ_DB8500_SPI0, pdata, 0) #define db8500_add_spi1(pdata) \ - dbx500_add_spi("spi1", U8500_SPI1_BASE, IRQ_DB8500_SPI1, pdata) + dbx500_add_spi("spi1", U8500_SPI1_BASE, IRQ_DB8500_SPI1, pdata, 0) #define db8500_add_spi2(pdata) \ - dbx500_add_spi("spi2", U8500_SPI2_BASE, IRQ_DB8500_SPI2, pdata) + dbx500_add_spi("spi2", U8500_SPI2_BASE, IRQ_DB8500_SPI2, pdata, 0) #define db8500_add_spi3(pdata) \ - dbx500_add_spi("spi3", U8500_SPI3_BASE, IRQ_DB8500_SPI3, pdata) + dbx500_add_spi("spi3", U8500_SPI3_BASE, IRQ_DB8500_SPI3, pdata, 0) #define db8500_add_uart0(pdata) \ dbx500_add_uart("uart0", U8500_UART0_BASE, IRQ_DB8500_UART0, pdata) diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h index 2c6f710..470ac52 100644 --- a/arch/arm/mach-ux500/include/mach/hardware.h +++ b/arch/arm/mach-ux500/include/mach/hardware.h @@ -29,9 +29,6 @@ #include <mach/db8500-regs.h> #include <mach/db5500-regs.h> -/* ST-Ericsson modified pl022 id */ -#define SSP_PER_ID 0x01080022 - #ifndef __ASSEMBLY__ #include <mach/id.h> diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S index c96fa1b..73b4a8b 100644 --- a/arch/arm/mm/cache-v6.S +++ b/arch/arm/mm/cache-v6.S @@ -176,6 +176,7 @@ ENDPROC(v6_coherent_kern_range) */ ENTRY(v6_flush_kern_dcache_area) add r1, r0, r1 + bic r0, r0, #D_CACHE_LINE_SIZE - 1 1: #ifdef HARVARD_CACHE mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index dc18d81..d32f02b 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -221,6 +221,8 @@ ENDPROC(v7_coherent_user_range) ENTRY(v7_flush_kern_dcache_area) dcache_line_size r2, r3 add r1, r0, r1 + sub r3, r2, #1 + bic r0, r0, r3 1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line / unified line add r0, r0, r2 diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index b0ee9ba..8bfae96 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -24,9 +24,7 @@ DEFINE_PER_CPU(struct mm_struct *, current_mm); /* * We fork()ed a process, and we need a new context for the child - * to run in. We reserve version 0 for initial tasks so we will - * always allocate an ASID. The ASID 0 is reserved for the TTBR - * register changing sequence. + * to run in. */ void __init_new_context(struct task_struct *tsk, struct mm_struct *mm) { @@ -36,8 +34,11 @@ void __init_new_context(struct task_struct *tsk, struct mm_struct *mm) static void flush_context(void) { - /* set the reserved ASID before flushing the TLB */ - asm("mcr p15, 0, %0, c13, c0, 1\n" : : "r" (0)); + u32 ttb; + /* Copy TTBR1 into TTBR0 */ + asm volatile("mrc p15, 0, %0, c2, c0, 1\n" + "mcr p15, 0, %0, c2, c0, 0" + : "=r" (ttb)); isb(); local_flush_tlb_all(); if (icache_is_vivt_asid_tagged()) { @@ -93,7 +94,7 @@ static void reset_context(void *info) return; smp_rmb(); - asid = cpu_last_asid + cpu + 1; + asid = cpu_last_asid + cpu; flush_context(); set_mm_context(mm, asid); @@ -143,13 +144,13 @@ void __new_context(struct mm_struct *mm) * to start a new version and flush the TLB. */ if (unlikely((asid & ~ASID_MASK) == 0)) { - asid = cpu_last_asid + smp_processor_id() + 1; + asid = cpu_last_asid + smp_processor_id(); flush_context(); #ifdef CONFIG_SMP smp_wmb(); smp_call_function(reset_context, NULL, 1); #endif - cpu_last_asid += NR_CPUS; + cpu_last_asid += NR_CPUS - 1; } set_mm_context(mm, asid); diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 3f17ea1..2c2cce9 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -15,12 +15,14 @@ #include <linux/mman.h> #include <linux/nodemask.h> #include <linux/initrd.h> +#include <linux/of_fdt.h> #include <linux/highmem.h> #include <linux/gfp.h> #include <linux/memblock.h> #include <linux/sort.h> #include <asm/mach-types.h> +#include <asm/prom.h> #include <asm/sections.h> #include <asm/setup.h> #include <asm/sizes.h> @@ -71,6 +73,14 @@ static int __init parse_tag_initrd2(const struct tag *tag) __tagtable(ATAG_INITRD2, parse_tag_initrd2); +#ifdef CONFIG_OF_FLATTREE +void __init early_init_dt_setup_initrd_arch(unsigned long start, unsigned long end) +{ + phys_initrd_start = start; + phys_initrd_size = end - start; +} +#endif /* CONFIG_OF_FLATTREE */ + /* * This keeps memory configuration data used by a couple memory * initialization functions, as well as show_mem() for the skipping @@ -273,13 +283,15 @@ static void __init arm_bootmem_free(unsigned long min, unsigned long max_low, free_area_init_node(0, zone_size, min, zhole_size); } -#ifndef CONFIG_SPARSEMEM +#ifdef CONFIG_HAVE_ARCH_PFN_VALID int pfn_valid(unsigned long pfn) { return memblock_is_memory(pfn << PAGE_SHIFT); } EXPORT_SYMBOL(pfn_valid); +#endif +#ifndef CONFIG_SPARSEMEM static void arm_memory_present(void) { } @@ -334,6 +346,7 @@ void __init arm_memblock_init(struct meminfo *mi, struct machine_desc *mdesc) #endif arm_mm_memblock_reserve(); + arm_dt_memblock_reserve(); /* reserve any platform specific memblock areas */ if (mdesc->reserve) diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index d238410..5b3d7d5 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -5,14 +5,9 @@ extern pmd_t *top_pmd; #define TOP_PTE(x) pte_offset_kernel(top_pmd, x) -static inline pmd_t *pmd_off(pgd_t *pgd, unsigned long virt) -{ - return pmd_offset(pud_offset(pgd, virt), virt); -} - static inline pmd_t *pmd_off_k(unsigned long virt) { - return pmd_off(pgd_offset_k(virt), virt); + return pmd_offset(pud_offset(pgd_offset_k(virt), virt), virt); } struct mem_type { diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 08a9236..9d9e736 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -763,15 +763,12 @@ static void __init sanity_check_meminfo(void) { int i, j, highmem = 0; - lowmem_limit = __pa(vmalloc_min - 1) + 1; - memblock_set_current_limit(lowmem_limit); - for (i = 0, j = 0; i < meminfo.nr_banks; i++) { struct membank *bank = &meminfo.bank[j]; *bank = meminfo.bank[i]; #ifdef CONFIG_HIGHMEM - if (__va(bank->start) > vmalloc_min || + if (__va(bank->start) >= vmalloc_min || __va(bank->start) < (void *)PAGE_OFFSET) highmem = 1; @@ -829,6 +826,9 @@ static void __init sanity_check_meminfo(void) bank->size = newsize; } #endif + if (!bank->highmem && bank->start + bank->size > lowmem_limit) + lowmem_limit = bank->start + bank->size; + j++; } #ifdef CONFIG_HIGHMEM @@ -852,6 +852,7 @@ static void __init sanity_check_meminfo(void) } #endif meminfo.nr_banks = j; + memblock_set_current_limit(lowmem_limit); } static inline void prepare_page_table(void) diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index ab17cc0..1d2b845 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -213,7 +213,9 @@ __v6_setup: mcr p15, 0, r0, c2, c0, 2 @ TTB control register ALT_SMP(orr r4, r4, #TTB_FLAGS_SMP) ALT_UP(orr r4, r4, #TTB_FLAGS_UP) - mcr p15, 0, r4, c2, c0, 1 @ load TTB1 + ALT_SMP(orr r8, r8, #TTB_FLAGS_SMP) + ALT_UP(orr r8, r8, #TTB_FLAGS_UP) + mcr p15, 0, r8, c2, c0, 1 @ load TTB1 #endif /* CONFIG_MMU */ adr r5, v6_crval ldmia r5, {r5, r6} diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index babfba09..b3b566e 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -108,18 +108,16 @@ ENTRY(cpu_v7_switch_mm) #ifdef CONFIG_ARM_ERRATA_430973 mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB #endif -#ifdef CONFIG_ARM_ERRATA_754322 - dsb -#endif - mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID - isb -1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 + mrc p15, 0, r2, c2, c0, 1 @ load TTB 1 + mcr p15, 0, r2, c2, c0, 0 @ into TTB 0 isb #ifdef CONFIG_ARM_ERRATA_754322 dsb #endif mcr p15, 0, r1, c13, c0, 1 @ set context ID isb + mcr p15, 0, r0, c2, c0, 0 @ set TTB 0 + isb #endif mov pc, lr ENDPROC(cpu_v7_switch_mm) @@ -368,7 +366,9 @@ __v7_setup: mcr p15, 0, r10, c2, c0, 2 @ TTB control register ALT_SMP(orr r4, r4, #TTB_FLAGS_SMP) ALT_UP(orr r4, r4, #TTB_FLAGS_UP) - mcr p15, 0, r4, c2, c0, 1 @ load TTB1 + ALT_SMP(orr r8, r8, #TTB_FLAGS_SMP) + ALT_UP(orr r8, r8, #TTB_FLAGS_UP) + mcr p15, 0, r8, c2, c0, 1 @ load TTB1 ldr r5, =PRRR @ PRRR ldr r6, =NMRR @ NMRR mcr p15, 0, r5, c10, c2, 0 @ write PRRR diff --git a/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h b/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h index 872de0bf..ea6c9c8 100644 --- a/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h +++ b/arch/arm/plat-omap/include/plat/gpmc-smsc911x.h @@ -14,14 +14,14 @@ #ifndef __ASM_ARCH_OMAP_GPMC_SMSC911X_H__ struct omap_smsc911x_platform_data { + int id; int cs; int gpio_irq; int gpio_reset; u32 flags; }; -#if defined(CONFIG_SMSC911X) || \ - defined(CONFIG_SMSC911X_MODULE) +#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) extern void gpmc_smsc911x_init(struct omap_smsc911x_platform_data *d); diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index 565d266..ac4b60d 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -129,7 +129,6 @@ static inline void __arch_decomp_setup(unsigned long arch_id) DEBUG_LL_OMAP1(3, sx1); /* omap2 based boards using UART1 */ - DEBUG_LL_OMAP2(1, omap2evm); DEBUG_LL_OMAP2(1, omap_2430sdp); DEBUG_LL_OMAP2(1, omap_apollon); DEBUG_LL_OMAP2(1, omap_h4); diff --git a/arch/arm/plat-omap/include/plat/usb.h b/arch/arm/plat-omap/include/plat/usb.h index 02b96c8..17d3c93 100644 --- a/arch/arm/plat-omap/include/plat/usb.h +++ b/arch/arm/plat-omap/include/plat/usb.h @@ -113,7 +113,7 @@ extern int omap4430_phy_suspend(struct device *dev, int suspend); extern void am35x_musb_reset(void); extern void am35x_musb_phy_power(u8 on); extern void am35x_musb_clear_irq(void); -extern void am35x_musb_set_mode(u8 musb_mode); +extern void am35x_set_mode(u8 musb_mode); /* * FIXME correct answer depends on hmc_mode, diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index 6751bcf..e98f5c5 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -7,7 +7,7 @@ config PLAT_S5P bool - depends on (ARCH_S5P64X0 || ARCH_S5P6442 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS4) + depends on (ARCH_S5P64X0 || ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS4) default y select ARM_VIC if !ARCH_EXYNOS4 select ARM_GIC if ARCH_EXYNOS4 diff --git a/arch/arm/plat-s5p/cpu.c b/arch/arm/plat-s5p/cpu.c index 5cf5e72..bbc2aa7 100644 --- a/arch/arm/plat-s5p/cpu.c +++ b/arch/arm/plat-s5p/cpu.c @@ -21,7 +21,6 @@ #include <plat/cpu.h> #include <plat/s5p6440.h> -#include <plat/s5p6442.h> #include <plat/s5p6450.h> #include <plat/s5pc100.h> #include <plat/s5pv210.h> @@ -30,7 +29,6 @@ /* table of supported CPUs */ static const char name_s5p6440[] = "S5P6440"; -static const char name_s5p6442[] = "S5P6442"; static const char name_s5p6450[] = "S5P6450"; static const char name_s5pc100[] = "S5PC100"; static const char name_s5pv210[] = "S5PV210/S5PC110"; @@ -46,14 +44,6 @@ static struct cpu_table cpu_ids[] __initdata = { .init = s5p64x0_init, .name = name_s5p6440, }, { - .idcode = 0x36442000, - .idmask = 0xfffff000, - .map_io = s5p6442_map_io, - .init_clocks = s5p6442_init_clocks, - .init_uarts = s5p6442_init_uarts, - .init = s5p6442_init, - .name = name_s5p6442, - }, { .idcode = 0x36450000, .idmask = 0xfffff000, .map_io = s5p6450_map_io, diff --git a/arch/arm/plat-s5p/include/plat/s5p6442.h b/arch/arm/plat-s5p/include/plat/s5p6442.h deleted file mode 100644 index 7b88013..0000000 --- a/arch/arm/plat-s5p/include/plat/s5p6442.h +++ /dev/null @@ -1,33 +0,0 @@ -/* arch/arm/plat-s5p/include/plat/s5p6442.h - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Header file for s5p6442 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* Common init code for S5P6442 related SoCs */ - -extern void s5p6442_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); -extern void s5p6442_register_clocks(void); -extern void s5p6442_setup_clocks(void); - -#ifdef CONFIG_CPU_S5P6442 - -extern int s5p6442_init(void); -extern void s5p6442_init_irq(void); -extern void s5p6442_map_io(void); -extern void s5p6442_init_clocks(int xtal); - -#define s5p6442_init_uarts s5p6442_common_init_uarts - -#else -#define s5p6442_init_clocks NULL -#define s5p6442_init_uarts NULL -#define s5p6442_map_io NULL -#define s5p6442_init NULL -#endif diff --git a/arch/arm/plat-samsung/include/plat/cpu.h b/arch/arm/plat-samsung/include/plat/cpu.h index 3aedac0..c0a5741 100644 --- a/arch/arm/plat-samsung/include/plat/cpu.h +++ b/arch/arm/plat-samsung/include/plat/cpu.h @@ -86,7 +86,6 @@ extern struct sysdev_class s3c2443_sysclass; extern struct sysdev_class s3c6410_sysclass; extern struct sysdev_class s3c64xx_sysclass; extern struct sysdev_class s5p64x0_sysclass; -extern struct sysdev_class s5p6442_sysclass; extern struct sysdev_class s5pv210_sysclass; extern struct sysdev_class exynos4_sysclass; diff --git a/arch/arm/plat-samsung/include/plat/debug-macro.S b/arch/arm/plat-samsung/include/plat/debug-macro.S index dc6efd9..207e275 100644 --- a/arch/arm/plat-samsung/include/plat/debug-macro.S +++ b/arch/arm/plat-samsung/include/plat/debug-macro.S @@ -11,7 +11,7 @@ #include <plat/regs-serial.h> -/* The S5PV210/S5PC110 and S5P6442 implementations are as belows. */ +/* The S5PV210/S5PC110 implementations are as belows. */ .macro fifo_level_s5pv210 rd, rx ldr \rd, [ \rx, # S3C2410_UFSTAT ] diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index 39818d8..b61b8ee 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -111,12 +111,6 @@ extern struct platform_device exynos4_device_spdif; extern struct platform_device exynos4_device_pd[]; extern struct platform_device exynos4_device_ahci; -extern struct platform_device s5p6442_device_pcm0; -extern struct platform_device s5p6442_device_pcm1; -extern struct platform_device s5p6442_device_iis0; -extern struct platform_device s5p6442_device_iis1; -extern struct platform_device s5p6442_device_spi; - extern struct platform_device s5p6440_device_pcm; extern struct platform_device s5p6440_device_iis; diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h index 788837e9..c151c5f 100644 --- a/arch/arm/plat-samsung/include/plat/regs-serial.h +++ b/arch/arm/plat-samsung/include/plat/regs-serial.h @@ -194,7 +194,7 @@ #define S3C64XX_UINTSP 0x34 #define S3C64XX_UINTM 0x38 -/* Following are specific to S5PV210 and S5P6442 */ +/* Following are specific to S5PV210 */ #define S5PV210_UCON_CLKMASK (1<<10) #define S5PV210_UCON_PCLK (0<<10) #define S5PV210_UCON_UCLK (1<<10) diff --git a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h index ff1a561..0ffe34a 100644 --- a/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h +++ b/arch/arm/plat-samsung/include/plat/s3c64xx-spi.h @@ -69,6 +69,5 @@ extern void s3c64xx_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); extern void s5pc100_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); extern void s5pv210_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); extern void s5p64x0_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); -extern void s5p6442_spi_set_info(int cntrlr, int src_clk_nr, int num_cs); #endif /* __S3C64XX_PLAT_SPI_H */ diff --git a/arch/avr32/include/asm/bitops.h b/arch/avr32/include/asm/bitops.h index 72444d9..b70c19b 100644 --- a/arch/avr32/include/asm/bitops.h +++ b/arch/avr32/include/asm/bitops.h @@ -270,14 +270,21 @@ static inline int __fls(unsigned long word) unsigned long find_first_zero_bit(const unsigned long *addr, unsigned long size); +#define find_first_zero_bit find_first_zero_bit + unsigned long find_next_zero_bit(const unsigned long *addr, unsigned long size, unsigned long offset); +#define find_next_zero_bit find_next_zero_bit + unsigned long find_first_bit(const unsigned long *addr, unsigned long size); +#define find_first_bit find_first_bit + unsigned long find_next_bit(const unsigned long *addr, unsigned long size, unsigned long offset); +#define find_next_bit find_next_bit /* * ffs: find first bit set. This is defined the same way as @@ -299,6 +306,14 @@ static inline int ffs(unsigned long word) #include <asm-generic/bitops/hweight.h> #include <asm-generic/bitops/lock.h> +extern unsigned long find_next_zero_bit_le(const void *addr, + unsigned long size, unsigned long offset); +#define find_next_zero_bit_le find_next_zero_bit_le + +extern unsigned long find_next_bit_le(const void *addr, + unsigned long size, unsigned long offset); +#define find_next_bit_le find_next_bit_le + #include <asm-generic/bitops/le.h> #include <asm-generic/bitops/ext2-atomic.h> diff --git a/arch/avr32/mach-at32ap/at32ap700x.c b/arch/avr32/mach-at32ap/at32ap700x.c index bfc9d07..aa677e2 100644 --- a/arch/avr32/mach-at32ap/at32ap700x.c +++ b/arch/avr32/mach-at32ap/at32ap700x.c @@ -1014,6 +1014,7 @@ static struct platform_device *__initdata at32_usarts[4]; void __init at32_map_usart(unsigned int hw_id, unsigned int line, int flags) { struct platform_device *pdev; + struct atmel_uart_data *pdata; switch (hw_id) { case 0: @@ -1042,7 +1043,8 @@ void __init at32_map_usart(unsigned int hw_id, unsigned int line, int flags) data->regs = (void __iomem *)pdev->resource[0].start; } - pdev->id = line; + pdata = pdev->dev.platform_data; + pdata->num = portnr; at32_usarts[line] = pdev; } diff --git a/arch/avr32/mach-at32ap/include/mach/board.h b/arch/avr32/mach-at32ap/include/mach/board.h index 6174020..679458d 100644 --- a/arch/avr32/mach-at32ap/include/mach/board.h +++ b/arch/avr32/mach-at32ap/include/mach/board.h @@ -33,6 +33,7 @@ extern struct platform_device *atmel_default_console_device; #define ATMEL_USART_CLK 0x04 struct atmel_uart_data { + int num; /* port num */ short use_dma_tx; /* use transmit DMA? */ short use_dma_rx; /* use receive DMA? */ void __iomem *regs; /* virtual base address, if any */ diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index a18180f..d619b17 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -47,9 +47,6 @@ config GENERIC_BUG config ZONE_DMA def_bool y -config GENERIC_FIND_NEXT_BIT - def_bool y - config GENERIC_GPIO def_bool y diff --git a/arch/blackfin/include/asm/kgdb.h b/arch/blackfin/include/asm/kgdb.h index 3ac0c72..aaf8845 100644 --- a/arch/blackfin/include/asm/kgdb.h +++ b/arch/blackfin/include/asm/kgdb.h @@ -108,6 +108,7 @@ static inline void arch_kgdb_breakpoint(void) #else # define CACHE_FLUSH_IS_SAFE 1 #endif +#define GDB_ADJUSTS_BREAK_OFFSET #define HW_INST_WATCHPOINT_NUM 6 #define HW_WATCHPOINT_NUM 8 #define TYPE_INST_WATCHPOINT 0 diff --git a/arch/blackfin/include/asm/ptrace.h b/arch/blackfin/include/asm/ptrace.h index 1066d63..7854d43 100644 --- a/arch/blackfin/include/asm/ptrace.h +++ b/arch/blackfin/include/asm/ptrace.h @@ -102,9 +102,6 @@ struct pt_regs { /* user_mode returns true if only one bit is set in IPEND, other than the master interrupt enable. */ #define user_mode(regs) (!(((regs)->ipend & ~0x10) & (((regs)->ipend & ~0x10) - 1))) -#define instruction_pointer(regs) ((regs)->pc) -#define user_stack_pointer(regs) ((regs)->usp) -#define profile_pc(regs) instruction_pointer(regs) extern void show_regs(struct pt_regs *); #define arch_has_single_step() (1) @@ -128,6 +125,8 @@ extern int is_user_addr_valid(struct task_struct *child, ((unsigned long)task_stack_page(task) + \ (THREAD_SIZE - sizeof(struct pt_regs))) +#include <asm-generic/ptrace.h> + #endif /* __KERNEL__ */ #endif /* __ASSEMBLY__ */ diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index e16dc45..76db1d4 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -382,7 +382,6 @@ static struct platform_device net2272_bfin_device = { #endif #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) -#ifdef CONFIG_MTD_PARTITIONS const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL }; static struct mtd_partition bfin_plat_nand_partitions[] = { @@ -396,7 +395,6 @@ static struct mtd_partition bfin_plat_nand_partitions[] = { .offset = MTDPART_OFS_APPEND, }, }; -#endif #define BFIN_NAND_PLAT_CLE 2 #define BFIN_NAND_PLAT_ALE 1 @@ -423,11 +421,9 @@ static struct platform_nand_data bfin_plat_nand_data = { .chip = { .nr_chips = 1, .chip_delay = 30, -#ifdef CONFIG_MTD_PARTITIONS .part_probe_types = part_probes, .partitions = bfin_plat_nand_partitions, .nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions), -#endif }, .ctrl = { .cmd_ctrl = bfin_plat_nand_cmd_ctrl, diff --git a/arch/blackfin/mach-bf561/boards/acvilon.c b/arch/blackfin/mach-bf561/boards/acvilon.c index 3926cd9..9231a94 100644 --- a/arch/blackfin/mach-bf561/boards/acvilon.c +++ b/arch/blackfin/mach-bf561/boards/acvilon.c @@ -243,7 +243,6 @@ static struct platform_device bfin_uart0_device = { #if defined(CONFIG_MTD_NAND_PLATFORM) || defined(CONFIG_MTD_NAND_PLATFORM_MODULE) -#ifdef CONFIG_MTD_PARTITIONS const char *part_probes[] = { "cmdlinepart", NULL }; static struct mtd_partition bfin_plat_nand_partitions[] = { @@ -257,7 +256,6 @@ static struct mtd_partition bfin_plat_nand_partitions[] = { .offset = MTDPART_OFS_APPEND, }, }; -#endif #define BFIN_NAND_PLAT_CLE 2 #define BFIN_NAND_PLAT_ALE 3 @@ -286,11 +284,9 @@ static struct platform_nand_data bfin_plat_nand_data = { .chip = { .nr_chips = 1, .chip_delay = 30, -#ifdef CONFIG_MTD_PARTITIONS .part_probe_types = part_probes, .partitions = bfin_plat_nand_partitions, .nr_partitions = ARRAY_SIZE(bfin_plat_nand_partitions), -#endif }, .ctrl = { .cmd_ctrl = bfin_plat_nand_cmd_ctrl, diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig index a6d0306..17addac 100644 --- a/arch/cris/Kconfig +++ b/arch/cris/Kconfig @@ -31,10 +31,6 @@ config ARCH_HAS_ILOG2_U64 bool default n -config GENERIC_FIND_NEXT_BIT - bool - default y - config GENERIC_HWEIGHT bool default y @@ -274,7 +270,6 @@ config ETRAX_AXISFLASHMAP select MTD_JEDECPROBE if ETRAX_ARCH_V32 select MTD_CHAR select MTD_BLOCK - select MTD_PARTITIONS select MTD_COMPLEX_MAPPINGS help This option enables MTD mapping of flash devices. Needed to use diff --git a/arch/cris/arch-v10/drivers/axisflashmap.c b/arch/cris/arch-v10/drivers/axisflashmap.c index ed708e1..a4bbdfd 100644 --- a/arch/cris/arch-v10/drivers/axisflashmap.c +++ b/arch/cris/arch-v10/drivers/axisflashmap.c @@ -372,7 +372,7 @@ static int __init init_axis_flash(void) #ifdef CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE if (mymtd) { main_partition.size = mymtd->size; - err = add_mtd_partitions(mymtd, &main_partition, 1); + err = mtd_device_register(mymtd, &main_partition, 1); if (err) panic("axisflashmap: Could not initialize " "partition for whole main mtd device!\n"); @@ -382,10 +382,12 @@ static int __init init_axis_flash(void) if (mymtd) { if (use_default_ptable) { printk(KERN_INFO " Using default partition table.\n"); - err = add_mtd_partitions(mymtd, axis_default_partitions, - NUM_DEFAULT_PARTITIONS); + err = mtd_device_register(mymtd, + axis_default_partitions, + NUM_DEFAULT_PARTITIONS); } else { - err = add_mtd_partitions(mymtd, axis_partitions, pidx); + err = mtd_device_register(mymtd, axis_partitions, + pidx); } if (err) diff --git a/arch/cris/arch-v32/drivers/Kconfig b/arch/cris/arch-v32/drivers/Kconfig index 1633b12..41a2732 100644 --- a/arch/cris/arch-v32/drivers/Kconfig +++ b/arch/cris/arch-v32/drivers/Kconfig @@ -405,7 +405,6 @@ config ETRAX_AXISFLASHMAP select MTD_JEDECPROBE select MTD_CHAR select MTD_BLOCK - select MTD_PARTITIONS select MTD_COMPLEX_MAPPINGS help This option enables MTD mapping of flash devices. Needed to use diff --git a/arch/cris/arch-v32/drivers/axisflashmap.c b/arch/cris/arch-v32/drivers/axisflashmap.c index 7b155f8..a2bde37 100644 --- a/arch/cris/arch-v32/drivers/axisflashmap.c +++ b/arch/cris/arch-v32/drivers/axisflashmap.c @@ -561,7 +561,7 @@ static int __init init_axis_flash(void) #ifdef CONFIG_ETRAX_AXISFLASHMAP_MTD0WHOLE if (main_mtd) { main_partition.size = main_mtd->size; - err = add_mtd_partitions(main_mtd, &main_partition, 1); + err = mtd_device_register(main_mtd, &main_partition, 1); if (err) panic("axisflashmap: Could not initialize " "partition for whole main mtd device!\n"); @@ -597,7 +597,8 @@ static int __init init_axis_flash(void) mtd_ram->erasesize = (main_mtd ? main_mtd->erasesize : CONFIG_ETRAX_PTABLE_SECTOR); } else { - err = add_mtd_partitions(main_mtd, &partition[part], 1); + err = mtd_device_register(main_mtd, &partition[part], + 1); if (err) panic("axisflashmap: Could not add mtd " "partition %d\n", part); @@ -633,7 +634,7 @@ static int __init init_axis_flash(void) #ifndef CONFIG_ETRAX_VCS_SIM if (aux_mtd) { aux_partition.size = aux_mtd->size; - err = add_mtd_partitions(aux_mtd, &aux_partition, 1); + err = mtd_device_register(aux_mtd, &aux_partition, 1); if (err) panic("axisflashmap: Could not initialize " "aux mtd device!\n"); diff --git a/arch/frv/Kconfig b/arch/frv/Kconfig index 064f621..cb884e4 100644 --- a/arch/frv/Kconfig +++ b/arch/frv/Kconfig @@ -19,14 +19,6 @@ config RWSEM_GENERIC_SPINLOCK config RWSEM_XCHGADD_ALGORITHM bool -config GENERIC_FIND_NEXT_BIT - bool - default y - -config GENERIC_FIND_BIT_LE - bool - default y - config GENERIC_HWEIGHT bool default y diff --git a/arch/frv/include/asm/suspend.h b/arch/frv/include/asm/suspend.h deleted file mode 100644 index 5fa7b5a..0000000 --- a/arch/frv/include/asm/suspend.h +++ /dev/null @@ -1,20 +0,0 @@ -/* suspend.h: suspension stuff - * - * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Howells (dhowells@redhat.com) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#ifndef _ASM_SUSPEND_H -#define _ASM_SUSPEND_H - -static inline int arch_prepare_suspend(void) -{ - return 0; -} - -#endif /* _ASM_SUSPEND_H */ diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig index e20322f..091ed61 100644 --- a/arch/h8300/Kconfig +++ b/arch/h8300/Kconfig @@ -41,14 +41,6 @@ config ARCH_HAS_ILOG2_U64 bool default n -config GENERIC_FIND_NEXT_BIT - bool - default y - -config GENERIC_FIND_BIT_LE - bool - default y - config GENERIC_HWEIGHT bool default y diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index e5cc56a..38280ef 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -78,10 +78,6 @@ config HUGETLB_PAGE_SIZE_VARIABLE depends on HUGETLB_PAGE default y -config GENERIC_FIND_NEXT_BIT - bool - default y - config GENERIC_CALIBRATE_DELAY bool default y diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c index 04440cc..85118df 100644 --- a/arch/ia64/kernel/time.c +++ b/arch/ia64/kernel/time.c @@ -36,7 +36,7 @@ static cycle_t itc_get_cycles(struct clocksource *cs); struct fsyscall_gtod_data_t fsyscall_gtod_data = { - .lock = SEQLOCK_UNLOCKED, + .lock = __SEQLOCK_UNLOCKED(fsyscall_gtod_data.lock), }; struct itc_jitter_data_t itc_jitter_data; diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig index 736b808..85b44e8 100644 --- a/arch/m32r/Kconfig +++ b/arch/m32r/Kconfig @@ -256,14 +256,6 @@ config ARCH_HAS_ILOG2_U64 bool default n -config GENERIC_FIND_NEXT_BIT - bool - default y - -config GENERIC_FIND_BIT_LE - bool - default y - config GENERIC_HWEIGHT bool default y diff --git a/arch/m32r/include/asm/smp.h b/arch/m32r/include/asm/smp.h index 8accc1b..cf7829a 100644 --- a/arch/m32r/include/asm/smp.h +++ b/arch/m32r/include/asm/smp.h @@ -81,11 +81,11 @@ static __inline__ int cpu_number_map(int cpu) static __inline__ unsigned int num_booting_cpus(void) { - return cpus_weight(cpu_callout_map); + return cpumask_weight(&cpu_callout_map); } extern void smp_send_timer(void); -extern unsigned long send_IPI_mask_phys(cpumask_t, int, int); +extern unsigned long send_IPI_mask_phys(const cpumask_t*, int, int); extern void arch_send_call_function_single_ipi(int cpu); extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); diff --git a/arch/m32r/kernel/smp.c b/arch/m32r/kernel/smp.c index fc10b39..092d40a 100644 --- a/arch/m32r/kernel/smp.c +++ b/arch/m32r/kernel/smp.c @@ -30,6 +30,7 @@ #include <asm/io.h> #include <asm/mmu_context.h> #include <asm/m32r.h> +#include <asm/tlbflush.h> /*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/ /* Data structures and variables */ @@ -61,33 +62,22 @@ extern spinlock_t ipi_lock[]; /* Function Prototypes */ /*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/ -void smp_send_reschedule(int); void smp_reschedule_interrupt(void); - -void smp_flush_cache_all(void); void smp_flush_cache_all_interrupt(void); -void smp_flush_tlb_all(void); static void flush_tlb_all_ipi(void *); - -void smp_flush_tlb_mm(struct mm_struct *); -void smp_flush_tlb_range(struct vm_area_struct *, unsigned long, \ - unsigned long); -void smp_flush_tlb_page(struct vm_area_struct *, unsigned long); static void flush_tlb_others(cpumask_t, struct mm_struct *, struct vm_area_struct *, unsigned long); + void smp_invalidate_interrupt(void); -void smp_send_stop(void); static void stop_this_cpu(void *); -void smp_send_timer(void); void smp_ipi_timer_interrupt(struct pt_regs *); void smp_local_timer_interrupt(void); static void send_IPI_allbutself(int, int); static void send_IPI_mask(const struct cpumask *, int, int); -unsigned long send_IPI_mask_phys(cpumask_t, int, int); /*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/ /* Rescheduling request Routines */ @@ -162,10 +152,10 @@ void smp_flush_cache_all(void) unsigned long *mask; preempt_disable(); - cpumask = cpu_online_map; - cpu_clear(smp_processor_id(), cpumask); + cpumask_copy(&cpumask, cpu_online_mask); + cpumask_clear_cpu(smp_processor_id(), &cpumask); spin_lock(&flushcache_lock); - mask=cpus_addr(cpumask); + mask=cpumask_bits(&cpumask); atomic_set_mask(*mask, (atomic_t *)&flushcache_cpumask); send_IPI_mask(&cpumask, INVALIDATE_CACHE_IPI, 0); _flush_cache_copyback_all(); @@ -263,8 +253,8 @@ void smp_flush_tlb_mm(struct mm_struct *mm) preempt_disable(); cpu_id = smp_processor_id(); mmc = &mm->context[cpu_id]; - cpu_mask = *mm_cpumask(mm); - cpu_clear(cpu_id, cpu_mask); + cpumask_copy(&cpu_mask, mm_cpumask(mm)); + cpumask_clear_cpu(cpu_id, &cpu_mask); if (*mmc != NO_CONTEXT) { local_irq_save(flags); @@ -275,7 +265,7 @@ void smp_flush_tlb_mm(struct mm_struct *mm) cpumask_clear_cpu(cpu_id, mm_cpumask(mm)); local_irq_restore(flags); } - if (!cpus_empty(cpu_mask)) + if (!cpumask_empty(&cpu_mask)) flush_tlb_others(cpu_mask, mm, NULL, FLUSH_ALL); preempt_enable(); @@ -333,8 +323,8 @@ void smp_flush_tlb_page(struct vm_area_struct *vma, unsigned long va) preempt_disable(); cpu_id = smp_processor_id(); mmc = &mm->context[cpu_id]; - cpu_mask = *mm_cpumask(mm); - cpu_clear(cpu_id, cpu_mask); + cpumask_copy(&cpu_mask, mm_cpumask(mm)); + cpumask_clear_cpu(cpu_id, &cpu_mask); #ifdef DEBUG_SMP if (!mm) @@ -348,7 +338,7 @@ void smp_flush_tlb_page(struct vm_area_struct *vma, unsigned long va) __flush_tlb_page(va); local_irq_restore(flags); } - if (!cpus_empty(cpu_mask)) + if (!cpumask_empty(&cpu_mask)) flush_tlb_others(cpu_mask, mm, vma, va); preempt_enable(); @@ -395,14 +385,14 @@ static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm, * - current CPU must not be in mask * - mask must exist :) */ - BUG_ON(cpus_empty(cpumask)); + BUG_ON(cpumask_empty(&cpumask)); - BUG_ON(cpu_isset(smp_processor_id(), cpumask)); + BUG_ON(cpumask_test_cpu(smp_processor_id(), &cpumask)); BUG_ON(!mm); /* If a CPU which we ran on has gone down, OK. */ - cpus_and(cpumask, cpumask, cpu_online_map); - if (cpus_empty(cpumask)) + cpumask_and(&cpumask, &cpumask, cpu_online_mask); + if (cpumask_empty(&cpumask)) return; /* @@ -416,7 +406,7 @@ static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm, flush_mm = mm; flush_vma = vma; flush_va = va; - mask=cpus_addr(cpumask); + mask=cpumask_bits(&cpumask); atomic_set_mask(*mask, (atomic_t *)&flush_cpumask); /* @@ -425,7 +415,7 @@ static void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm, */ send_IPI_mask(&cpumask, INVALIDATE_TLB_IPI, 0); - while (!cpus_empty(flush_cpumask)) { + while (!cpumask_empty((cpumask_t*)&flush_cpumask)) { /* nothing. lockup detection does not belong here */ mb(); } @@ -460,7 +450,7 @@ void smp_invalidate_interrupt(void) int cpu_id = smp_processor_id(); unsigned long *mmc = &flush_mm->context[cpu_id]; - if (!cpu_isset(cpu_id, flush_cpumask)) + if (!cpumask_test_cpu(cpu_id, &flush_cpumask)) return; if (flush_va == FLUSH_ALL) { @@ -478,7 +468,7 @@ void smp_invalidate_interrupt(void) __flush_tlb_page(va); } } - cpu_clear(cpu_id, flush_cpumask); + cpumask_clear_cpu(cpu_id, (cpumask_t*)&flush_cpumask); } /*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/ @@ -530,7 +520,7 @@ static void stop_this_cpu(void *dummy) /* * Remove this CPU: */ - cpu_clear(cpu_id, cpu_online_map); + set_cpu_online(cpu_id, false); /* * PSW IE = 1; @@ -725,8 +715,8 @@ static void send_IPI_allbutself(int ipi_num, int try) { cpumask_t cpumask; - cpumask = cpu_online_map; - cpu_clear(smp_processor_id(), cpumask); + cpumask_copy(&cpumask, cpu_online_mask); + cpumask_clear_cpu(smp_processor_id(), &cpumask); send_IPI_mask(&cpumask, ipi_num, try); } @@ -763,13 +753,13 @@ static void send_IPI_mask(const struct cpumask *cpumask, int ipi_num, int try) cpumask_and(&tmp, cpumask, cpu_online_mask); BUG_ON(!cpumask_equal(cpumask, &tmp)); - physid_mask = CPU_MASK_NONE; + cpumask_clear(&physid_mask); for_each_cpu(cpu_id, cpumask) { if ((phys_id = cpu_to_physid(cpu_id)) != -1) - cpu_set(phys_id, physid_mask); + cpumask_set_cpu(phys_id, &physid_mask); } - send_IPI_mask_phys(physid_mask, ipi_num, try); + send_IPI_mask_phys(&physid_mask, ipi_num, try); } /*==========================================================================* @@ -792,14 +782,14 @@ static void send_IPI_mask(const struct cpumask *cpumask, int ipi_num, int try) * ---------- --- -------------------------------------------------------- * *==========================================================================*/ -unsigned long send_IPI_mask_phys(cpumask_t physid_mask, int ipi_num, +unsigned long send_IPI_mask_phys(const cpumask_t *physid_mask, int ipi_num, int try) { spinlock_t *ipilock; volatile unsigned long *ipicr_addr; unsigned long ipicr_val; unsigned long my_physid_mask; - unsigned long mask = cpus_addr(physid_mask)[0]; + unsigned long mask = cpumask_bits(physid_mask)[0]; if (mask & ~physids_coerce(phys_cpu_present_map)) diff --git a/arch/m32r/kernel/smpboot.c b/arch/m32r/kernel/smpboot.c index e034844..cfdbe5d 100644 --- a/arch/m32r/kernel/smpboot.c +++ b/arch/m32r/kernel/smpboot.c @@ -135,9 +135,9 @@ void __devinit smp_prepare_boot_cpu(void) { bsp_phys_id = hard_smp_processor_id(); physid_set(bsp_phys_id, phys_cpu_present_map); - cpu_set(0, cpu_online_map); /* BSP's cpu_id == 0 */ - cpu_set(0, cpu_callout_map); - cpu_set(0, cpu_callin_map); + set_cpu_online(0, true); /* BSP's cpu_id == 0 */ + cpumask_set_cpu(0, &cpu_callout_map); + cpumask_set_cpu(0, &cpu_callin_map); /* * Initialize the logical to physical CPU number mapping @@ -178,7 +178,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus) for (phys_id = 0 ; phys_id < nr_cpu ; phys_id++) physid_set(phys_id, phys_cpu_present_map); #ifndef CONFIG_HOTPLUG_CPU - init_cpu_present(&cpu_possible_map); + init_cpu_present(cpu_possible_mask); #endif show_mp_info(nr_cpu); @@ -294,10 +294,10 @@ static void __init do_boot_cpu(int phys_id) send_status = 0; boot_status = 0; - cpu_set(phys_id, cpu_bootout_map); + cpumask_set_cpu(phys_id, &cpu_bootout_map); /* Send Startup IPI */ - send_IPI_mask_phys(cpumask_of_cpu(phys_id), CPU_BOOT_IPI, 0); + send_IPI_mask_phys(cpumask_of(phys_id), CPU_BOOT_IPI, 0); Dprintk("Waiting for send to finish...\n"); timeout = 0; @@ -306,7 +306,7 @@ static void __init do_boot_cpu(int phys_id) do { Dprintk("+"); udelay(1000); - send_status = !cpu_isset(phys_id, cpu_bootin_map); + send_status = !cpumask_test_cpu(phys_id, &cpu_bootin_map); } while (send_status && (timeout++ < 100)); Dprintk("After Startup.\n"); @@ -316,19 +316,19 @@ static void __init do_boot_cpu(int phys_id) * allow APs to start initializing. */ Dprintk("Before Callout %d.\n", cpu_id); - cpu_set(cpu_id, cpu_callout_map); + cpumask_set_cpu(cpu_id, &cpu_callout_map); Dprintk("After Callout %d.\n", cpu_id); /* * Wait 5s total for a response */ for (timeout = 0; timeout < 5000; timeout++) { - if (cpu_isset(cpu_id, cpu_callin_map)) + if (cpumask_test_cpu(cpu_id, &cpu_callin_map)) break; /* It has booted */ udelay(1000); } - if (cpu_isset(cpu_id, cpu_callin_map)) { + if (cpumask_test_cpu(cpu_id, &cpu_callin_map)) { /* number CPUs logically, starting from 1 (BSP is 0) */ Dprintk("OK.\n"); } else { @@ -340,9 +340,9 @@ static void __init do_boot_cpu(int phys_id) if (send_status || boot_status) { unmap_cpu_to_physid(cpu_id, phys_id); - cpu_clear(cpu_id, cpu_callout_map); - cpu_clear(cpu_id, cpu_callin_map); - cpu_clear(cpu_id, cpu_initialized); + cpumask_clear_cpu(cpu_id, &cpu_callout_map); + cpumask_clear_cpu(cpu_id, &cpu_callin_map); + cpumask_clear_cpu(cpu_id, &cpu_initialized); cpucount--; } } @@ -351,17 +351,17 @@ int __cpuinit __cpu_up(unsigned int cpu_id) { int timeout; - cpu_set(cpu_id, smp_commenced_mask); + cpumask_set_cpu(cpu_id, &smp_commenced_mask); /* * Wait 5s total for a response */ for (timeout = 0; timeout < 5000; timeout++) { - if (cpu_isset(cpu_id, cpu_online_map)) + if (cpu_online(cpu_id)) break; udelay(1000); } - if (!cpu_isset(cpu_id, cpu_online_map)) + if (!cpu_online(cpu_id)) BUG(); return 0; @@ -373,11 +373,11 @@ void __init smp_cpus_done(unsigned int max_cpus) unsigned long bogosum = 0; for (timeout = 0; timeout < 5000; timeout++) { - if (cpus_equal(cpu_callin_map, cpu_online_map)) + if (cpumask_equal(&cpu_callin_map, cpu_online_mask)) break; udelay(1000); } - if (!cpus_equal(cpu_callin_map, cpu_online_map)) + if (!cpumask_equal(&cpu_callin_map, cpu_online_mask)) BUG(); for (cpu_id = 0 ; cpu_id < num_online_cpus() ; cpu_id++) @@ -388,7 +388,7 @@ void __init smp_cpus_done(unsigned int max_cpus) */ Dprintk("Before bogomips.\n"); if (cpucount) { - for_each_cpu_mask(cpu_id, cpu_online_map) + for_each_cpu(cpu_id,cpu_online_mask) bogosum += cpu_data[cpu_id].loops_per_jiffy; printk(KERN_INFO "Total of %d processors activated " \ @@ -425,7 +425,7 @@ int __init start_secondary(void *unused) cpu_init(); preempt_disable(); smp_callin(); - while (!cpu_isset(smp_processor_id(), smp_commenced_mask)) + while (!cpumask_test_cpu(smp_processor_id(), &smp_commenced_mask)) cpu_relax(); smp_online(); @@ -463,7 +463,7 @@ static void __init smp_callin(void) int cpu_id = smp_processor_id(); unsigned long timeout; - if (cpu_isset(cpu_id, cpu_callin_map)) { + if (cpumask_test_cpu(cpu_id, &cpu_callin_map)) { printk("huh, phys CPU#%d, CPU#%d already present??\n", phys_id, cpu_id); BUG(); @@ -474,7 +474,7 @@ static void __init smp_callin(void) timeout = jiffies + (2 * HZ); while (time_before(jiffies, timeout)) { /* Has the boot CPU finished it's STARTUP sequence ? */ - if (cpu_isset(cpu_id, cpu_callout_map)) + if (cpumask_test_cpu(cpu_id, &cpu_callout_map)) break; cpu_relax(); } @@ -486,7 +486,7 @@ static void __init smp_callin(void) } /* Allow the master to continue. */ - cpu_set(cpu_id, cpu_callin_map); + cpumask_set_cpu(cpu_id, &cpu_callin_map); } static void __init smp_online(void) @@ -503,7 +503,7 @@ static void __init smp_online(void) /* Save our processor parameters */ smp_store_cpu_info(cpu_id); - cpu_set(cpu_id, cpu_online_map); + set_cpu_online(cpu_id, true); } /*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*/ diff --git a/arch/m68k/Kconfig.nommu b/arch/m68k/Kconfig.nommu index 273bcca..fc98f9b 100644 --- a/arch/m68k/Kconfig.nommu +++ b/arch/m68k/Kconfig.nommu @@ -2,10 +2,6 @@ config FPU bool default n -config GENERIC_FIND_NEXT_BIT - bool - default y - config GENERIC_GPIO bool default n diff --git a/arch/m68k/include/asm/bitops_mm.h b/arch/m68k/include/asm/bitops_mm.h index e9020f8..89cf5b8 100644 --- a/arch/m68k/include/asm/bitops_mm.h +++ b/arch/m68k/include/asm/bitops_mm.h @@ -200,6 +200,7 @@ out: res += ((long)p - (long)vaddr - 4) * 8; return res < size ? res : size; } +#define find_first_zero_bit find_first_zero_bit static inline int find_next_zero_bit(const unsigned long *vaddr, int size, int offset) @@ -229,6 +230,7 @@ static inline int find_next_zero_bit(const unsigned long *vaddr, int size, /* No zero yet, search remaining full bytes for a zero */ return offset + find_first_zero_bit(p, size - offset); } +#define find_next_zero_bit find_next_zero_bit static inline int find_first_bit(const unsigned long *vaddr, unsigned size) { @@ -253,6 +255,7 @@ out: res += ((long)p - (long)vaddr - 4) * 8; return res < size ? res : size; } +#define find_first_bit find_first_bit static inline int find_next_bit(const unsigned long *vaddr, int size, int offset) @@ -282,6 +285,7 @@ static inline int find_next_bit(const unsigned long *vaddr, int size, /* No one yet, search remaining full bytes for a one */ return offset + find_first_bit(p, size - offset); } +#define find_next_bit find_next_bit /* * ffz = Find First Zero in word. Undefined if no zero exists, @@ -398,6 +402,7 @@ out: res += (p - addr) * 32; return res < size ? res : size; } +#define find_first_zero_bit_le find_first_zero_bit_le static inline unsigned long find_next_zero_bit_le(const void *addr, unsigned long size, unsigned long offset) @@ -427,6 +432,7 @@ static inline unsigned long find_next_zero_bit_le(const void *addr, /* No zero yet, search remaining full bytes for a zero */ return offset + find_first_zero_bit_le(p, size - offset); } +#define find_next_zero_bit_le find_next_zero_bit_le static inline int find_first_bit_le(const void *vaddr, unsigned size) { @@ -451,6 +457,7 @@ out: res += (p - addr) * 32; return res < size ? res : size; } +#define find_first_bit_le find_first_bit_le static inline unsigned long find_next_bit_le(const void *addr, unsigned long size, unsigned long offset) @@ -480,6 +487,7 @@ static inline unsigned long find_next_bit_le(const void *addr, /* No set bit yet, search remaining full bytes for a set bit */ return offset + find_first_bit_le(p, size - offset); } +#define find_next_bit_le find_next_bit_le /* Bitmap functions for the ext2 filesystem. */ diff --git a/arch/m68k/include/asm/bitops_no.h b/arch/m68k/include/asm/bitops_no.h index 6b0e2d3..72e85ac 100644 --- a/arch/m68k/include/asm/bitops_no.h +++ b/arch/m68k/include/asm/bitops_no.h @@ -319,6 +319,10 @@ found_first: found_middle: return result + ffz(__swab32(tmp)); } +#define find_next_zero_bit_le find_next_zero_bit_le + +extern unsigned long find_next_bit_le(const void *addr, + unsigned long size, unsigned long offset); #endif /* __KERNEL__ */ diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index eccdefe..e446bab 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -33,12 +33,6 @@ config ARCH_HAS_ILOG2_U32 config ARCH_HAS_ILOG2_U64 def_bool n -config GENERIC_FIND_NEXT_BIT - def_bool y - -config GENERIC_FIND_BIT_LE - def_bool y - config GENERIC_HWEIGHT def_bool y diff --git a/arch/microblaze/kernel/prom.c b/arch/microblaze/kernel/prom.c index 00ee90f..b15cc21 100644 --- a/arch/microblaze/kernel/prom.c +++ b/arch/microblaze/kernel/prom.c @@ -130,7 +130,7 @@ void __init early_init_devtree(void *params) * device-tree, including the platform type, initrd location and * size, TCE reserve, and more ... */ - of_scan_flat_dt(early_init_dt_scan_chosen, NULL); + of_scan_flat_dt(early_init_dt_scan_chosen, cmd_line); /* Scan memory nodes and rebuild MEMBLOCKs */ memblock_init(); diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index cef1a85..653da62 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -821,14 +821,6 @@ config ARCH_SUPPORTS_OPROFILE bool default y if !MIPS_MT_SMTC -config GENERIC_FIND_NEXT_BIT - bool - default y - -config GENERIC_FIND_BIT_LE - bool - default y - config GENERIC_HWEIGHT bool default y diff --git a/arch/mips/cavium-octeon/flash_setup.c b/arch/mips/cavium-octeon/flash_setup.c index 008f657..0ee02f5 100644 --- a/arch/mips/cavium-octeon/flash_setup.c +++ b/arch/mips/cavium-octeon/flash_setup.c @@ -16,7 +16,6 @@ static struct map_info flash_map; static struct mtd_info *mymtd; -#ifdef CONFIG_MTD_PARTITIONS static int nr_parts; static struct mtd_partition *parts; static const char *part_probe_types[] = { @@ -26,7 +25,6 @@ static const char *part_probe_types[] = { #endif NULL }; -#endif /** * Module/ driver initialization. @@ -63,17 +61,10 @@ static int __init flash_init(void) if (mymtd) { mymtd->owner = THIS_MODULE; -#ifdef CONFIG_MTD_PARTITIONS nr_parts = parse_mtd_partitions(mymtd, part_probe_types, &parts, 0); - if (nr_parts > 0) - add_mtd_partitions(mymtd, parts, nr_parts); - else - add_mtd_device(mymtd); -#else - add_mtd_device(mymtd); -#endif + mtd_device_register(mymtd, parts, nr_parts); } else { pr_err("Failed to register MTD device for flash\n"); } diff --git a/arch/mips/configs/bcm47xx_defconfig b/arch/mips/configs/bcm47xx_defconfig index 22fdf2f..ad15fb1 100644 --- a/arch/mips/configs/bcm47xx_defconfig +++ b/arch/mips/configs/bcm47xx_defconfig @@ -16,7 +16,6 @@ CONFIG_TASK_IO_ACCOUNTING=y CONFIG_AUDIT=y CONFIG_TINY_RCU=y CONFIG_CGROUPS=y -CONFIG_CGROUP_NS=y CONFIG_CGROUP_CPUACCT=y CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y diff --git a/arch/mips/include/asm/prom.h b/arch/mips/include/asm/prom.h index f29b862..857d9b7 100644 --- a/arch/mips/include/asm/prom.h +++ b/arch/mips/include/asm/prom.h @@ -14,9 +14,6 @@ #ifdef CONFIG_OF #include <asm/bootinfo.h> -/* which is compatible with the flattened device tree (FDT) */ -#define cmd_line arcs_cmdline - extern int early_init_dt_scan_memory_arch(unsigned long node, const char *uname, int depth, void *data); diff --git a/arch/mips/include/asm/suspend.h b/arch/mips/include/asm/suspend.h index 294cdb6..3adac3b 100644 --- a/arch/mips/include/asm/suspend.h +++ b/arch/mips/include/asm/suspend.h @@ -1,8 +1,6 @@ #ifndef __ASM_SUSPEND_H #define __ASM_SUSPEND_H -static inline int arch_prepare_suspend(void) { return 0; } - /* References to section boundaries */ extern const void __nosave_begin, __nosave_end; diff --git a/arch/mips/kernel/prom.c b/arch/mips/kernel/prom.c index a19811e9..5b7eade4 100644 --- a/arch/mips/kernel/prom.c +++ b/arch/mips/kernel/prom.c @@ -83,7 +83,8 @@ void __init early_init_devtree(void *params) * device-tree, including the platform type, initrd location and * size, and more ... */ - of_scan_flat_dt(early_init_dt_scan_chosen, NULL); + of_scan_flat_dt(early_init_dt_scan_chosen, arcs_cmdline); + /* Scan memory nodes */ of_scan_flat_dt(early_init_dt_scan_root, NULL); diff --git a/arch/mips/txx9/generic/setup.c b/arch/mips/txx9/generic/setup.c index 812816c..ec38e00 100644 --- a/arch/mips/txx9/generic/setup.c +++ b/arch/mips/txx9/generic/setup.c @@ -639,7 +639,6 @@ void __init txx9_physmap_flash_init(int no, unsigned long addr, .flags = IORESOURCE_MEM, }; struct platform_device *pdev; -#ifdef CONFIG_MTD_PARTITIONS static struct mtd_partition parts[2]; struct physmap_flash_data pdata_part; @@ -658,7 +657,7 @@ void __init txx9_physmap_flash_init(int no, unsigned long addr, pdata_part.parts = parts; pdata = &pdata_part; } -#endif + pdev = platform_device_alloc("physmap-flash", no); if (!pdev || platform_device_add_resources(pdev, &res, 1) || diff --git a/arch/mn10300/Kconfig b/arch/mn10300/Kconfig index feaf09c..1f87034 100644 --- a/arch/mn10300/Kconfig +++ b/arch/mn10300/Kconfig @@ -44,9 +44,6 @@ config GENERIC_CALIBRATE_DELAY config GENERIC_CMOS_UPDATE def_bool n -config GENERIC_FIND_NEXT_BIT - def_bool y - config GENERIC_HWEIGHT def_bool y diff --git a/arch/mn10300/configs/asb2364_defconfig b/arch/mn10300/configs/asb2364_defconfig index 31d7626..fbb96ae 100644 --- a/arch/mn10300/configs/asb2364_defconfig +++ b/arch/mn10300/configs/asb2364_defconfig @@ -8,7 +8,6 @@ CONFIG_TASK_XACCT=y CONFIG_TASK_IO_ACCOUNTING=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CGROUPS=y -CONFIG_CGROUP_NS=y CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_DEVICE=y CONFIG_CGROUP_CPUACCT=y diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig index 69ff049..65adc86 100644 --- a/arch/parisc/Kconfig +++ b/arch/parisc/Kconfig @@ -47,14 +47,6 @@ config ARCH_HAS_ILOG2_U64 bool default n -config GENERIC_FIND_NEXT_BIT - bool - default y - -config GENERIC_FIND_BIT_LE - bool - default y - config GENERIC_BUG bool default y diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 423145a6..2729c66 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -91,14 +91,6 @@ config GENERIC_HWEIGHT bool default y -config GENERIC_FIND_NEXT_BIT - bool - default y - -config GENERIC_FIND_BIT_LE - bool - default y - config GENERIC_GPIO bool help @@ -141,6 +133,7 @@ config PPC select GENERIC_IRQ_SHOW select GENERIC_IRQ_SHOW_LEVEL select HAVE_RCU_TABLE_FREE if SMP + select HAVE_SYSCALL_TRACEPOINTS config EARLY_PRINTK bool diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts index 2779f08..22dd6ae 100644 --- a/arch/powerpc/boot/dts/canyonlands.dts +++ b/arch/powerpc/boot/dts/canyonlands.dts @@ -530,5 +530,23 @@ 0x0 0x0 0x0 0x3 &UIC3 0x12 0x4 /* swizzled int C */ 0x0 0x0 0x0 0x4 &UIC3 0x13 0x4 /* swizzled int D */>; }; + + MSI: ppc4xx-msi@C10000000 { + compatible = "amcc,ppc4xx-msi", "ppc4xx-msi"; + reg = < 0xC 0x10000000 0x100>; + sdr-base = <0x36C>; + msi-data = <0x00000000>; + msi-mask = <0x44440000>; + interrupt-count = <3>; + interrupts = <0 1 2 3>; + interrupt-parent = <&UIC3>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0 &UIC3 0x18 1 + 1 &UIC3 0x19 1 + 2 &UIC3 0x1A 1 + 3 &UIC3 0x1B 1>; + }; }; }; diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts index 7c3be5e..f913dbe 100644 --- a/arch/powerpc/boot/dts/katmai.dts +++ b/arch/powerpc/boot/dts/katmai.dts @@ -442,6 +442,24 @@ 0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>; }; + MSI: ppc4xx-msi@400300000 { + compatible = "amcc,ppc4xx-msi", "ppc4xx-msi"; + reg = < 0x4 0x00300000 0x100>; + sdr-base = <0x3B0>; + msi-data = <0x00000000>; + msi-mask = <0x44440000>; + interrupt-count = <3>; + interrupts =<0 1 2 3>; + interrupt-parent = <&UIC0>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0 &UIC0 0xC 1 + 1 &UIC0 0x0D 1 + 2 &UIC0 0x0E 1 + 3 &UIC0 0x0F 1>; + }; + I2O: i2o@400100000 { compatible = "ibm,i2o-440spe"; reg = <0x00000004 0x00100000 0x100>; diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts index 89edb16..1613d6e 100644 --- a/arch/powerpc/boot/dts/kilauea.dts +++ b/arch/powerpc/boot/dts/kilauea.dts @@ -403,5 +403,33 @@ 0x0 0x0 0x0 0x3 &UIC2 0xd 0x4 /* swizzled int C */ 0x0 0x0 0x0 0x4 &UIC2 0xe 0x4 /* swizzled int D */>; }; + + MSI: ppc4xx-msi@C10000000 { + compatible = "amcc,ppc4xx-msi", "ppc4xx-msi"; + reg = < 0x0 0xEF620000 0x100>; + sdr-base = <0x4B0>; + msi-data = <0x00000000>; + msi-mask = <0x44440000>; + interrupt-count = <12>; + interrupts = <0 1 2 3 4 5 6 7 8 9 0xA 0xB 0xC 0xD>; + interrupt-parent = <&UIC2>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0 &UIC2 0x10 1 + 1 &UIC2 0x11 1 + 2 &UIC2 0x12 1 + 2 &UIC2 0x13 1 + 2 &UIC2 0x14 1 + 2 &UIC2 0x15 1 + 2 &UIC2 0x16 1 + 2 &UIC2 0x17 1 + 2 &UIC2 0x18 1 + 2 &UIC2 0x19 1 + 2 &UIC2 0x1A 1 + 2 &UIC2 0x1B 1 + 2 &UIC2 0x1C 1 + 3 &UIC2 0x1D 1>; + }; }; }; diff --git a/arch/powerpc/boot/dts/redwood.dts b/arch/powerpc/boot/dts/redwood.dts index 81636c0..d86a3a4 100644 --- a/arch/powerpc/boot/dts/redwood.dts +++ b/arch/powerpc/boot/dts/redwood.dts @@ -358,8 +358,28 @@ 0x0 0x0 0x0 0x4 &UIC3 0xb 0x4 /* swizzled int D */>; }; + MSI: ppc4xx-msi@400300000 { + compatible = "amcc,ppc4xx-msi", "ppc4xx-msi"; + reg = < 0x4 0x00300000 0x100 + 0x4 0x00300000 0x100>; + sdr-base = <0x3B0>; + msi-data = <0x00000000>; + msi-mask = <0x44440000>; + interrupt-count = <3>; + interrupts =<0 1 2 3>; + interrupt-parent = <&UIC0>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0 &UIC0 0xC 1 + 1 &UIC0 0x0D 1 + 2 &UIC0 0x0E 1 + 3 &UIC0 0x0F 1>; + }; + }; + chosen { linux,stdout-path = "/plb/opb/serial@ef600200"; }; diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig index 2142089..04360f9 100644 --- a/arch/powerpc/configs/ppc6xx_defconfig +++ b/arch/powerpc/configs/ppc6xx_defconfig @@ -10,7 +10,6 @@ CONFIG_TASK_XACCT=y CONFIG_TASK_IO_ACCOUNTING=y CONFIG_AUDIT=y CONFIG_CGROUPS=y -CONFIG_CGROUP_NS=y CONFIG_CGROUP_DEVICE=y CONFIG_CGROUP_CPUACCT=y CONFIG_RESOURCE_COUNTERS=y diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index 7de1386..c9f212b 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -15,7 +15,6 @@ CONFIG_AUDITSYSCALL=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_CGROUPS=y -CONFIG_CGROUP_NS=y CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_DEVICE=y CONFIG_CPUSETS=y diff --git a/arch/powerpc/include/asm/fsl_lbc.h b/arch/powerpc/include/asm/fsl_lbc.h index 5c1bf34..8a0b5ec 100644 --- a/arch/powerpc/include/asm/fsl_lbc.h +++ b/arch/powerpc/include/asm/fsl_lbc.h @@ -157,6 +157,8 @@ struct fsl_lbc_regs { #define LBCR_EPAR_SHIFT 16 #define LBCR_BMT 0x0000FF00 #define LBCR_BMT_SHIFT 8 +#define LBCR_BMTPS 0x0000000F +#define LBCR_BMTPS_SHIFT 0 #define LBCR_INIT 0x00040000 __be32 lcrr; /**< Clock Ratio Register */ #define LCRR_DBYP 0x80000000 diff --git a/arch/powerpc/include/asm/ftrace.h b/arch/powerpc/include/asm/ftrace.h index dde1296..169d039 100644 --- a/arch/powerpc/include/asm/ftrace.h +++ b/arch/powerpc/include/asm/ftrace.h @@ -60,4 +60,18 @@ struct dyn_arch_ftrace { #endif +#if defined(CONFIG_FTRACE_SYSCALLS) && defined(CONFIG_PPC64) && !defined(__ASSEMBLY__) +#define ARCH_HAS_SYSCALL_MATCH_SYM_NAME +static inline bool arch_syscall_match_sym_name(const char *sym, const char *name) +{ + /* + * Compare the symbol name with the system call name. Skip the .sys or .SyS + * prefix from the symbol name and the sys prefix from the system call name and + * just match the rest. This is only needed on ppc64 since symbol names on + * 32bit do not start with a period so the generic function will work. + */ + return !strcmp(sym + 4, name + 3); +} +#endif /* CONFIG_FTRACE_SYSCALLS && CONFIG_PPC64 && !__ASSEMBLY__ */ + #endif /* _ASM_POWERPC_FTRACE */ diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h index 852b8c1..fd8201d 100644 --- a/arch/powerpc/include/asm/hvcall.h +++ b/arch/powerpc/include/asm/hvcall.h @@ -236,7 +236,7 @@ #define H_HOME_NODE_ASSOCIATIVITY 0x2EC #define H_BEST_ENERGY 0x2F4 #define H_GET_MPP_X 0x314 -#define MAX_HCALL_OPCODE H_BEST_ENERGY +#define MAX_HCALL_OPCODE H_GET_MPP_X #ifndef __ASSEMBLY__ diff --git a/arch/powerpc/include/asm/rio.h b/arch/powerpc/include/asm/rio.h index 0018bf8..d902abd 100644 --- a/arch/powerpc/include/asm/rio.h +++ b/arch/powerpc/include/asm/rio.h @@ -14,5 +14,10 @@ #define ASM_PPC_RIO_H extern void platform_rio_init(void); +#ifdef CONFIG_RAPIDIO +extern int fsl_rio_mcheck_exception(struct pt_regs *); +#else +static inline int fsl_rio_mcheck_exception(struct pt_regs *regs) {return 0; } +#endif #endif /* ASM_PPC_RIO_H */ diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h index 880b8c1..11eb404 100644 --- a/arch/powerpc/include/asm/smp.h +++ b/arch/powerpc/include/asm/smp.h @@ -191,8 +191,6 @@ extern unsigned long __secondary_hold_spinloop; extern unsigned long __secondary_hold_acknowledge; extern char __secondary_hold; -extern irqreturn_t debug_ipi_action(int irq, void *data); - #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ diff --git a/arch/powerpc/include/asm/suspend.h b/arch/powerpc/include/asm/suspend.h deleted file mode 100644 index c6efc34..0000000 --- a/arch/powerpc/include/asm/suspend.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_POWERPC_SUSPEND_H -#define __ASM_POWERPC_SUSPEND_H - -static inline int arch_prepare_suspend(void) { return 0; } - -#endif /* __ASM_POWERPC_SUSPEND_H */ diff --git a/arch/powerpc/include/asm/syscall.h b/arch/powerpc/include/asm/syscall.h index 23913e9..b54b2ad 100644 --- a/arch/powerpc/include/asm/syscall.h +++ b/arch/powerpc/include/asm/syscall.h @@ -15,6 +15,11 @@ #include <linux/sched.h> +/* ftrace syscalls requires exporting the sys_call_table */ +#ifdef CONFIG_FTRACE_SYSCALLS +extern const unsigned long *sys_call_table; +#endif /* CONFIG_FTRACE_SYSCALLS */ + static inline long syscall_get_nr(struct task_struct *task, struct pt_regs *regs) { diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h index 37c353e..836f231 100644 --- a/arch/powerpc/include/asm/thread_info.h +++ b/arch/powerpc/include/asm/thread_info.h @@ -110,7 +110,8 @@ static inline struct thread_info *current_thread_info(void) #define TIF_NOERROR 12 /* Force successful syscall return */ #define TIF_NOTIFY_RESUME 13 /* callback before returning to user */ #define TIF_FREEZE 14 /* Freezing for suspend */ -#define TIF_RUNLATCH 15 /* Is the runlatch enabled? */ +#define TIF_SYSCALL_TRACEPOINT 15 /* syscall tracepoint instrumentation */ +#define TIF_RUNLATCH 16 /* Is the runlatch enabled? */ /* as above, but as bit values */ #define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) @@ -127,8 +128,10 @@ static inline struct thread_info *current_thread_info(void) #define _TIF_NOERROR (1<<TIF_NOERROR) #define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME) #define _TIF_FREEZE (1<<TIF_FREEZE) +#define _TIF_SYSCALL_TRACEPOINT (1<<TIF_SYSCALL_TRACEPOINT) #define _TIF_RUNLATCH (1<<TIF_RUNLATCH) -#define _TIF_SYSCALL_T_OR_A (_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP) +#define _TIF_SYSCALL_T_OR_A (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \ + _TIF_SECCOMP | _TIF_SYSCALL_TRACEPOINT) #define _TIF_USER_WORK_MASK (_TIF_SIGPENDING | _TIF_NEED_RESCHED | \ _TIF_NOTIFY_RESUME) diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile index 9aab363..e8b9818 100644 --- a/arch/powerpc/kernel/Makefile +++ b/arch/powerpc/kernel/Makefile @@ -109,6 +109,7 @@ obj-$(CONFIG_PPC_IO_WORKAROUNDS) += io-workarounds.o obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o +obj-$(CONFIG_FTRACE_SYSCALLS) += ftrace.o obj-$(CONFIG_PERF_EVENTS) += perf_callchain.o obj-$(CONFIG_PPC_PERF_CTRS) += perf_event.o diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c index ce1f3e44..bf99cfa 100644 --- a/arch/powerpc/kernel/ftrace.c +++ b/arch/powerpc/kernel/ftrace.c @@ -22,6 +22,7 @@ #include <asm/cacheflush.h> #include <asm/code-patching.h> #include <asm/ftrace.h> +#include <asm/syscall.h> #ifdef CONFIG_DYNAMIC_FTRACE @@ -600,3 +601,10 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr) } } #endif /* CONFIG_FUNCTION_GRAPH_TRACER */ + +#if defined(CONFIG_FTRACE_SYSCALLS) && defined(CONFIG_PPC64) +unsigned long __init arch_syscall_addr(int nr) +{ + return sys_call_table[nr*2]; +} +#endif /* CONFIG_FTRACE_SYSCALLS && CONFIG_PPC64 */ diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index a24d37d..5b428e3 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -295,17 +295,20 @@ static inline void handle_one_irq(unsigned int irq) unsigned long saved_sp_limit; struct irq_desc *desc; + desc = irq_to_desc(irq); + if (!desc) + return; + /* Switch to the irq stack to handle this */ curtp = current_thread_info(); irqtp = hardirq_ctx[smp_processor_id()]; if (curtp == irqtp) { /* We're already on the irq stack, just handle it */ - generic_handle_irq(irq); + desc->handle_irq(irq, desc); return; } - desc = irq_to_desc(irq); saved_sp_limit = current->thread.ksp_limit; irqtp->task = curtp->task; @@ -557,15 +560,8 @@ struct irq_host *irq_alloc_host(struct device_node *of_node, if (revmap_type == IRQ_HOST_MAP_LEGACY) { if (irq_map[0].host != NULL) { raw_spin_unlock_irqrestore(&irq_big_lock, flags); - /* If we are early boot, we can't free the structure, - * too bad... - * this will be fixed once slab is made available early - * instead of the current cruft - */ - if (mem_init_done) { - of_node_put(host->of_node); - kfree(host); - } + of_node_put(host->of_node); + kfree(host); return NULL; } irq_map[0].host = host; @@ -727,9 +723,7 @@ unsigned int irq_create_mapping(struct irq_host *host, } pr_debug("irq: -> using host @%p\n", host); - /* Check if mapping already exist, if it does, call - * host->ops->map() to update the flags - */ + /* Check if mapping already exists */ virq = irq_find_mapping(host, hwirq); if (virq != NO_IRQ) { pr_debug("irq: -> existing mapping on virq %d\n", virq); @@ -899,10 +893,13 @@ unsigned int irq_radix_revmap_lookup(struct irq_host *host, return irq_find_mapping(host, hwirq); /* - * No rcu_read_lock(ing) needed, the ptr returned can't go under us - * as it's referencing an entry in the static irq_map table. + * The ptr returned references the static global irq_map. + * but freeing an irq can delete nodes along the path to + * do the lookup via call_rcu. */ + rcu_read_lock(); ptr = radix_tree_lookup(&host->revmap_data.tree, hwirq); + rcu_read_unlock(); /* * If found in radix tree, then fine. @@ -1010,14 +1007,23 @@ void irq_free_virt(unsigned int virq, unsigned int count) WARN_ON (virq < NUM_ISA_INTERRUPTS); WARN_ON (count == 0 || (virq + count) > irq_virq_count); + if (virq < NUM_ISA_INTERRUPTS) { + if (virq + count < NUM_ISA_INTERRUPTS) + return; + count =- NUM_ISA_INTERRUPTS - virq; + virq = NUM_ISA_INTERRUPTS; + } + + if (count > irq_virq_count || virq > irq_virq_count - count) { + if (virq > irq_virq_count) + return; + count = irq_virq_count - virq; + } + raw_spin_lock_irqsave(&irq_big_lock, flags); for (i = virq; i < (virq + count); i++) { struct irq_host *host; - if (i < NUM_ISA_INTERRUPTS || - (virq + count) > irq_virq_count) - continue; - host = irq_map[i].host; irq_map[i].hwirq = host->inval_irq; smp_wmb(); diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 48aeb55..f2c906b 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -694,7 +694,7 @@ void __init early_init_devtree(void *params) * device-tree, including the platform type, initrd location and * size, TCE reserve, and more ... */ - of_scan_flat_dt(early_init_dt_scan_chosen_ppc, NULL); + of_scan_flat_dt(early_init_dt_scan_chosen_ppc, cmd_line); /* Scan memory nodes and rebuild MEMBLOCKs */ memblock_init(); diff --git a/arch/powerpc/kernel/ptrace.c b/arch/powerpc/kernel/ptrace.c index a6ae1cf..cb22024 100644 --- a/arch/powerpc/kernel/ptrace.c +++ b/arch/powerpc/kernel/ptrace.c @@ -29,6 +29,7 @@ #include <linux/signal.h> #include <linux/seccomp.h> #include <linux/audit.h> +#include <trace/syscall.h> #ifdef CONFIG_PPC32 #include <linux/module.h> #endif @@ -40,6 +41,9 @@ #include <asm/pgtable.h> #include <asm/system.h> +#define CREATE_TRACE_POINTS +#include <trace/events/syscalls.h> + /* * The parameter save area on the stack is used to store arguments being passed * to callee function and is located at fixed offset from stack pointer. @@ -1710,6 +1714,9 @@ long do_syscall_trace_enter(struct pt_regs *regs) */ ret = -1L; + if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT))) + trace_sys_enter(regs, regs->gpr[0]); + if (unlikely(current->audit_context)) { #ifdef CONFIG_PPC64 if (!is_32bit_task()) @@ -1738,6 +1745,9 @@ void do_syscall_trace_leave(struct pt_regs *regs) audit_syscall_exit((regs->ccr&0x10000000)?AUDITSC_FAILURE:AUDITSC_SUCCESS, regs->result); + if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT))) + trace_sys_exit(regs, regs->result); + step = test_thread_flag(TIF_SINGLESTEP); if (step || test_thread_flag(TIF_SYSCALL_TRACE)) tracehook_report_syscall_exit(regs, step); diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c index 4a6f2ec..8ebc670 100644 --- a/arch/powerpc/kernel/smp.c +++ b/arch/powerpc/kernel/smp.c @@ -129,7 +129,7 @@ static irqreturn_t call_function_single_action(int irq, void *data) return IRQ_HANDLED; } -irqreturn_t debug_ipi_action(int irq, void *data) +static irqreturn_t debug_ipi_action(int irq, void *data) { if (crash_ipi_function_ptr) { crash_ipi_function_ptr(get_irq_regs()); diff --git a/arch/powerpc/kernel/swsusp.c b/arch/powerpc/kernel/swsusp.c index 560c961..aa17b76 100644 --- a/arch/powerpc/kernel/swsusp.c +++ b/arch/powerpc/kernel/swsusp.c @@ -10,7 +10,6 @@ */ #include <linux/sched.h> -#include <asm/suspend.h> #include <asm/system.h> #include <asm/current.h> #include <asm/mmu_context.h> diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index b13306b..0ff4ab9 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -55,6 +55,7 @@ #endif #include <asm/kexec.h> #include <asm/ppc-opcode.h> +#include <asm/rio.h> #if defined(CONFIG_DEBUGGER) || defined(CONFIG_KEXEC) int (*__debugger)(struct pt_regs *regs) __read_mostly; @@ -424,6 +425,12 @@ int machine_check_e500mc(struct pt_regs *regs) unsigned long reason = mcsr; int recoverable = 1; + if (reason & MCSR_BUS_RBERR) { + recoverable = fsl_rio_mcheck_exception(regs); + if (recoverable == 1) + goto silent_out; + } + printk("Machine check in kernel mode.\n"); printk("Caused by (from MCSR=%lx): ", reason); @@ -499,6 +506,7 @@ int machine_check_e500mc(struct pt_regs *regs) reason & MCSR_MEA ? "Effective" : "Physical", addr); } +silent_out: mtspr(SPRN_MCSR, mcsr); return mfspr(SPRN_MCSR) == 0 && recoverable; } @@ -507,6 +515,11 @@ int machine_check_e500(struct pt_regs *regs) { unsigned long reason = get_mc_reason(regs); + if (reason & MCSR_BUS_RBERR) { + if (fsl_rio_mcheck_exception(regs)) + return 1; + } + printk("Machine check in kernel mode.\n"); printk("Caused by (from MCSR=%lx): ", reason); diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c index 8ee51a2..e6bec74 100644 --- a/arch/powerpc/oprofile/op_model_power4.c +++ b/arch/powerpc/oprofile/op_model_power4.c @@ -261,6 +261,28 @@ static int get_kernel(unsigned long pc, unsigned long mmcra) return is_kernel; } +static bool pmc_overflow(unsigned long val) +{ + if ((int)val < 0) + return true; + + /* + * Events on POWER7 can roll back if a speculative event doesn't + * eventually complete. Unfortunately in some rare cases they will + * raise a performance monitor exception. We need to catch this to + * ensure we reset the PMC. In all cases the PMC will be 256 or less + * cycles from overflow. + * + * We only do this if the first pass fails to find any overflowing + * PMCs because a user might set a period of less than 256 and we + * don't want to mistakenly reset them. + */ + if (__is_processor(PV_POWER7) && ((0x80000000 - val) <= 256)) + return true; + + return false; +} + static void power4_handle_interrupt(struct pt_regs *regs, struct op_counter_config *ctr) { @@ -281,7 +303,7 @@ static void power4_handle_interrupt(struct pt_regs *regs, for (i = 0; i < cur_cpu_spec->num_pmcs; ++i) { val = classic_ctr_read(i); - if (val < 0) { + if (pmc_overflow(val)) { if (oprofile_running && ctr[i].enabled) { oprofile_add_ext_sample(pc, regs, i, is_kernel); classic_ctr_write(i, reset_value[i]); diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig index b721764..d733d7c 100644 --- a/arch/powerpc/platforms/40x/Kconfig +++ b/arch/powerpc/platforms/40x/Kconfig @@ -57,6 +57,8 @@ config KILAUEA select 405EX select PPC40x_SIMPLE select PPC4xx_PCI_EXPRESS + select PCI_MSI + select PPC4xx_MSI help This option enables support for the AMCC PPC405EX evaluation board. diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index f485fc5f..e958b6f 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -74,6 +74,8 @@ config KATMAI select 440SPe select PCI select PPC4xx_PCI_EXPRESS + select PCI_MSI + select PCC4xx_MSI help This option enables support for the AMCC PPC440SPe evaluation board. @@ -118,6 +120,8 @@ config CANYONLANDS select 460EX select PCI select PPC4xx_PCI_EXPRESS + select PCI_MSI + select PPC4xx_MSI select IBM_NEW_EMAC_RGMII select IBM_NEW_EMAC_ZMII help @@ -144,6 +148,8 @@ config REDWOOD select 460SX select PCI select PPC4xx_PCI_EXPRESS + select PCI_MSI + select PPC4xx_MSI help This option enables support for the AMCC PPC460SX Redwood board. diff --git a/arch/powerpc/platforms/cell/interrupt.c b/arch/powerpc/platforms/cell/interrupt.c index 449c08c..3e4eba6 100644 --- a/arch/powerpc/platforms/cell/interrupt.c +++ b/arch/powerpc/platforms/cell/interrupt.c @@ -176,14 +176,14 @@ EXPORT_SYMBOL_GPL(iic_get_target_id); #ifdef CONFIG_SMP /* Use the highest interrupt priorities for IPI */ -static inline int iic_ipi_to_irq(int ipi) +static inline int iic_msg_to_irq(int msg) { - return IIC_IRQ_TYPE_IPI + 0xf - ipi; + return IIC_IRQ_TYPE_IPI + 0xf - msg; } -void iic_cause_IPI(int cpu, int mesg) +void iic_message_pass(int cpu, int msg) { - out_be64(&per_cpu(cpu_iic, cpu).regs->generate, (0xf - mesg) << 4); + out_be64(&per_cpu(cpu_iic, cpu).regs->generate, (0xf - msg) << 4); } struct irq_host *iic_get_irq_host(int node) @@ -192,50 +192,31 @@ struct irq_host *iic_get_irq_host(int node) } EXPORT_SYMBOL_GPL(iic_get_irq_host); -static irqreturn_t iic_ipi_action(int irq, void *dev_id) -{ - int ipi = (int)(long)dev_id; - - switch(ipi) { - case PPC_MSG_CALL_FUNCTION: - generic_smp_call_function_interrupt(); - break; - case PPC_MSG_RESCHEDULE: - scheduler_ipi(); - break; - case PPC_MSG_CALL_FUNC_SINGLE: - generic_smp_call_function_single_interrupt(); - break; - case PPC_MSG_DEBUGGER_BREAK: - debug_ipi_action(0, NULL); - break; - } - return IRQ_HANDLED; -} -static void iic_request_ipi(int ipi, const char *name) +static void iic_request_ipi(int msg) { int virq; - virq = irq_create_mapping(iic_host, iic_ipi_to_irq(ipi)); + virq = irq_create_mapping(iic_host, iic_msg_to_irq(msg)); if (virq == NO_IRQ) { printk(KERN_ERR - "iic: failed to map IPI %s\n", name); + "iic: failed to map IPI %s\n", smp_ipi_name[msg]); return; } - if (request_irq(virq, iic_ipi_action, IRQF_DISABLED, name, - (void *)(long)ipi)) - printk(KERN_ERR - "iic: failed to request IPI %s\n", name); + + /* + * If smp_request_message_ipi encounters an error it will notify + * the error. If a message is not needed it will return non-zero. + */ + if (smp_request_message_ipi(virq, msg)) + irq_dispose_mapping(virq); } void iic_request_IPIs(void) { - iic_request_ipi(PPC_MSG_CALL_FUNCTION, "IPI-call"); - iic_request_ipi(PPC_MSG_RESCHEDULE, "IPI-resched"); - iic_request_ipi(PPC_MSG_CALL_FUNC_SINGLE, "IPI-call-single"); -#ifdef CONFIG_DEBUGGER - iic_request_ipi(PPC_MSG_DEBUGGER_BREAK, "IPI-debug"); -#endif /* CONFIG_DEBUGGER */ + iic_request_ipi(PPC_MSG_CALL_FUNCTION); + iic_request_ipi(PPC_MSG_RESCHEDULE); + iic_request_ipi(PPC_MSG_CALL_FUNC_SINGLE); + iic_request_ipi(PPC_MSG_DEBUGGER_BREAK); } #endif /* CONFIG_SMP */ diff --git a/arch/powerpc/platforms/cell/interrupt.h b/arch/powerpc/platforms/cell/interrupt.h index 942dc39..4f60ae6 100644 --- a/arch/powerpc/platforms/cell/interrupt.h +++ b/arch/powerpc/platforms/cell/interrupt.h @@ -75,7 +75,7 @@ enum { }; extern void iic_init_IRQ(void); -extern void iic_cause_IPI(int cpu, int mesg); +extern void iic_message_pass(int cpu, int msg); extern void iic_request_IPIs(void); extern void iic_setup_cpu(void); diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c index d176e61..dbb641e 100644 --- a/arch/powerpc/platforms/cell/smp.c +++ b/arch/powerpc/platforms/cell/smp.c @@ -152,7 +152,7 @@ static int smp_cell_cpu_bootable(unsigned int nr) return 1; } static struct smp_ops_t bpa_iic_smp_ops = { - .message_pass = iic_cause_IPI, + .message_pass = iic_message_pass, .probe = smp_iic_probe, .kick_cpu = smp_cell_kick_cpu, .setup_cpu = smp_cell_setup_cpu, diff --git a/arch/powerpc/sysdev/Kconfig b/arch/powerpc/sysdev/Kconfig index d775fd1..7b4df37 100644 --- a/arch/powerpc/sysdev/Kconfig +++ b/arch/powerpc/sysdev/Kconfig @@ -7,11 +7,18 @@ config PPC4xx_PCI_EXPRESS depends on PCI && 4xx default n +config PPC4xx_MSI + bool + depends on PCI_MSI + depends on PCI && 4xx + default n + config PPC_MSI_BITMAP bool depends on PCI_MSI default y if MPIC default y if FSL_PCI + default y if PPC4xx_MSI source "arch/powerpc/sysdev/xics/Kconfig" diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 6076e00..0efa990 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_OF_RTC) += of_rtc.o ifeq ($(CONFIG_PCI),y) obj-$(CONFIG_4xx) += ppc4xx_pci.o endif +obj-$(CONFIG_PPC4xx_MSI) += ppc4xx_msi.o obj-$(CONFIG_PPC4xx_CPM) += ppc4xx_cpm.o obj-$(CONFIG_PPC4xx_GPIO) += ppc4xx_gpio.o diff --git a/arch/powerpc/sysdev/fsl_lbc.c b/arch/powerpc/sysdev/fsl_lbc.c index 4fcb5a4..0608b16 100644 --- a/arch/powerpc/sysdev/fsl_lbc.c +++ b/arch/powerpc/sysdev/fsl_lbc.c @@ -184,7 +184,8 @@ int fsl_upm_run_pattern(struct fsl_upm *upm, void __iomem *io_base, u32 mar) } EXPORT_SYMBOL(fsl_upm_run_pattern); -static int __devinit fsl_lbc_ctrl_init(struct fsl_lbc_ctrl *ctrl) +static int __devinit fsl_lbc_ctrl_init(struct fsl_lbc_ctrl *ctrl, + struct device_node *node) { struct fsl_lbc_regs __iomem *lbc = ctrl->regs; @@ -198,6 +199,10 @@ static int __devinit fsl_lbc_ctrl_init(struct fsl_lbc_ctrl *ctrl) /* Enable interrupts for any detected events */ out_be32(&lbc->lteir, LTEIR_ENABLE); + /* Set the monitor timeout value to the maximum for erratum A001 */ + if (of_device_is_compatible(node, "fsl,elbc")) + clrsetbits_be32(&lbc->lbcr, LBCR_BMT, LBCR_BMTPS); + return 0; } @@ -304,7 +309,7 @@ static int __devinit fsl_lbc_ctrl_probe(struct platform_device *dev) fsl_lbc_ctrl_dev->dev = &dev->dev; - ret = fsl_lbc_ctrl_init(fsl_lbc_ctrl_dev); + ret = fsl_lbc_ctrl_init(fsl_lbc_ctrl_dev, dev->dev.of_node); if (ret < 0) goto err; diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index 4979853..5b206a2 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -10,7 +10,7 @@ * - Added Port-Write message handling * - Added Machine Check exception handling * - * Copyright (C) 2007, 2008 Freescale Semiconductor, Inc. + * Copyright (C) 2007, 2008, 2010 Freescale Semiconductor, Inc. * Zhang Wei <wei.zhang@freescale.com> * * Copyright 2005 MontaVista Software, Inc. @@ -47,15 +47,33 @@ #define IRQ_RIO_RX(m) (((struct rio_priv *)(m->priv))->rxirq) #define IRQ_RIO_PW(m) (((struct rio_priv *)(m->priv))->pwirq) +#define IPWSR_CLEAR 0x98 +#define OMSR_CLEAR 0x1cb3 +#define IMSR_CLEAR 0x491 +#define IDSR_CLEAR 0x91 +#define ODSR_CLEAR 0x1c00 +#define LTLEECSR_ENABLE_ALL 0xFFC000FC +#define ESCSR_CLEAR 0x07120204 + +#define RIO_PORT1_EDCSR 0x0640 +#define RIO_PORT2_EDCSR 0x0680 +#define RIO_PORT1_IECSR 0x10130 +#define RIO_PORT2_IECSR 0x101B0 +#define RIO_IM0SR 0x13064 +#define RIO_IM1SR 0x13164 +#define RIO_OM0SR 0x13004 +#define RIO_OM1SR 0x13104 + #define RIO_ATMU_REGS_OFFSET 0x10c00 #define RIO_P_MSG_REGS_OFFSET 0x11000 #define RIO_S_MSG_REGS_OFFSET 0x13000 #define RIO_GCCSR 0x13c #define RIO_ESCSR 0x158 +#define RIO_PORT2_ESCSR 0x178 #define RIO_CCSR 0x15c #define RIO_LTLEDCSR 0x0608 -#define RIO_LTLEDCSR_IER 0x80000000 -#define RIO_LTLEDCSR_PRT 0x01000000 +#define RIO_LTLEDCSR_IER 0x80000000 +#define RIO_LTLEDCSR_PRT 0x01000000 #define RIO_LTLEECSR 0x060c #define RIO_EPWISR 0x10010 #define RIO_ISR_AACR 0x10120 @@ -88,7 +106,10 @@ #define RIO_IPWSR_PWD 0x00000008 #define RIO_IPWSR_PWB 0x00000004 -#define RIO_EPWISR_PINT 0x80000000 +/* EPWISR Error match value */ +#define RIO_EPWISR_PINT1 0x80000000 +#define RIO_EPWISR_PINT2 0x40000000 +#define RIO_EPWISR_MU 0x00000002 #define RIO_EPWISR_PW 0x00000001 #define RIO_MSG_DESC_SIZE 32 @@ -260,9 +281,7 @@ struct rio_priv { static void __iomem *rio_regs_win; #ifdef CONFIG_E500 -static int (*saved_mcheck_exception)(struct pt_regs *regs); - -static int fsl_rio_mcheck_exception(struct pt_regs *regs) +int fsl_rio_mcheck_exception(struct pt_regs *regs) { const struct exception_table_entry *entry = NULL; unsigned long reason = mfspr(SPRN_MCSR); @@ -284,11 +303,9 @@ static int fsl_rio_mcheck_exception(struct pt_regs *regs) } } - if (saved_mcheck_exception) - return saved_mcheck_exception(regs); - else - return cur_cpu_spec->machine_check(regs); + return 0; } +EXPORT_SYMBOL_GPL(fsl_rio_mcheck_exception); #endif /** @@ -1064,6 +1081,40 @@ static int fsl_rio_doorbell_init(struct rio_mport *mport) return rc; } +static void port_error_handler(struct rio_mport *port, int offset) +{ + /*XXX: Error recovery is not implemented, we just clear errors */ + out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0); + + if (offset == 0) { + out_be32((u32 *)(rio_regs_win + RIO_PORT1_EDCSR), 0); + out_be32((u32 *)(rio_regs_win + RIO_PORT1_IECSR), 0); + out_be32((u32 *)(rio_regs_win + RIO_ESCSR), ESCSR_CLEAR); + } else { + out_be32((u32 *)(rio_regs_win + RIO_PORT2_EDCSR), 0); + out_be32((u32 *)(rio_regs_win + RIO_PORT2_IECSR), 0); + out_be32((u32 *)(rio_regs_win + RIO_PORT2_ESCSR), ESCSR_CLEAR); + } +} + +static void msg_unit_error_handler(struct rio_mport *port) +{ + struct rio_priv *priv = port->priv; + + /*XXX: Error recovery is not implemented, we just clear errors */ + out_be32((u32 *)(rio_regs_win + RIO_LTLEDCSR), 0); + + out_be32((u32 *)(rio_regs_win + RIO_IM0SR), IMSR_CLEAR); + out_be32((u32 *)(rio_regs_win + RIO_IM1SR), IMSR_CLEAR); + out_be32((u32 *)(rio_regs_win + RIO_OM0SR), OMSR_CLEAR); + out_be32((u32 *)(rio_regs_win + RIO_OM1SR), OMSR_CLEAR); + + out_be32(&priv->msg_regs->odsr, ODSR_CLEAR); + out_be32(&priv->msg_regs->dsr, IDSR_CLEAR); + + out_be32(&priv->msg_regs->pwsr, IPWSR_CLEAR); +} + /** * fsl_rio_port_write_handler - MPC85xx port write interrupt handler * @irq: Linux interrupt number @@ -1144,10 +1195,22 @@ fsl_rio_port_write_handler(int irq, void *dev_instance) } pw_done: - if (epwisr & RIO_EPWISR_PINT) { + if (epwisr & RIO_EPWISR_PINT1) { + tmp = in_be32(priv->regs_win + RIO_LTLEDCSR); + pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp); + port_error_handler(port, 0); + } + + if (epwisr & RIO_EPWISR_PINT2) { tmp = in_be32(priv->regs_win + RIO_LTLEDCSR); pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp); - out_be32(priv->regs_win + RIO_LTLEDCSR, 0); + port_error_handler(port, 1); + } + + if (epwisr & RIO_EPWISR_MU) { + tmp = in_be32(priv->regs_win + RIO_LTLEDCSR); + pr_debug("RIO_LTLEDCSR = 0x%x\n", tmp); + msg_unit_error_handler(port); } return IRQ_HANDLED; @@ -1258,12 +1321,14 @@ static int fsl_rio_port_write_init(struct rio_mport *mport) /* Hook up port-write handler */ - rc = request_irq(IRQ_RIO_PW(mport), fsl_rio_port_write_handler, 0, - "port-write", (void *)mport); + rc = request_irq(IRQ_RIO_PW(mport), fsl_rio_port_write_handler, + IRQF_SHARED, "port-write", (void *)mport); if (rc < 0) { pr_err("MPC85xx RIO: unable to request inbound doorbell irq"); goto err_out; } + /* Enable Error Interrupt */ + out_be32((u32 *)(rio_regs_win + RIO_LTLEECSR), LTLEECSR_ENABLE_ALL); INIT_WORK(&priv->pw_work, fsl_pw_dpc); spin_lock_init(&priv->pw_fifo_lock); @@ -1538,11 +1603,6 @@ int fsl_rio_setup(struct platform_device *dev) fsl_rio_doorbell_init(port); fsl_rio_port_write_init(port); -#ifdef CONFIG_E500 - saved_mcheck_exception = ppc_md.machine_check_exception; - ppc_md.machine_check_exception = fsl_rio_mcheck_exception; -#endif - return 0; err: iounmap(priv->regs_win); diff --git a/arch/powerpc/sysdev/ppc4xx_msi.c b/arch/powerpc/sysdev/ppc4xx_msi.c new file mode 100644 index 0000000..367af02 --- /dev/null +++ b/arch/powerpc/sysdev/ppc4xx_msi.c @@ -0,0 +1,276 @@ +/* + * Adding PCI-E MSI support for PPC4XX SoCs. + * + * Copyright (c) 2010, Applied Micro Circuits Corporation + * Authors: Tirumala R Marri <tmarri@apm.com> + * Feng Kan <fkan@apm.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <linux/irq.h> +#include <linux/bootmem.h> +#include <linux/pci.h> +#include <linux/msi.h> +#include <linux/of_platform.h> +#include <linux/interrupt.h> +#include <asm/prom.h> +#include <asm/hw_irq.h> +#include <asm/ppc-pci.h> +#include <boot/dcr.h> +#include <asm/dcr-regs.h> +#include <asm/msi_bitmap.h> + +#define PEIH_TERMADH 0x00 +#define PEIH_TERMADL 0x08 +#define PEIH_MSIED 0x10 +#define PEIH_MSIMK 0x18 +#define PEIH_MSIASS 0x20 +#define PEIH_FLUSH0 0x30 +#define PEIH_FLUSH1 0x38 +#define PEIH_CNTRST 0x48 +#define NR_MSI_IRQS 4 + +struct ppc4xx_msi { + u32 msi_addr_lo; + u32 msi_addr_hi; + void __iomem *msi_regs; + int msi_virqs[NR_MSI_IRQS]; + struct msi_bitmap bitmap; + struct device_node *msi_dev; +}; + +static struct ppc4xx_msi ppc4xx_msi; + +static int ppc4xx_msi_init_allocator(struct platform_device *dev, + struct ppc4xx_msi *msi_data) +{ + int err; + + err = msi_bitmap_alloc(&msi_data->bitmap, NR_MSI_IRQS, + dev->dev.of_node); + if (err) + return err; + + err = msi_bitmap_reserve_dt_hwirqs(&msi_data->bitmap); + if (err < 0) { + msi_bitmap_free(&msi_data->bitmap); + return err; + } + + return 0; +} + +static int ppc4xx_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) +{ + int int_no = -ENOMEM; + unsigned int virq; + struct msi_msg msg; + struct msi_desc *entry; + struct ppc4xx_msi *msi_data = &ppc4xx_msi; + + list_for_each_entry(entry, &dev->msi_list, list) { + int_no = msi_bitmap_alloc_hwirqs(&msi_data->bitmap, 1); + if (int_no >= 0) + break; + if (int_no < 0) { + pr_debug("%s: fail allocating msi interrupt\n", + __func__); + } + virq = irq_of_parse_and_map(msi_data->msi_dev, int_no); + if (virq == NO_IRQ) { + dev_err(&dev->dev, "%s: fail mapping irq\n", __func__); + msi_bitmap_free_hwirqs(&msi_data->bitmap, int_no, 1); + return -ENOSPC; + } + dev_dbg(&dev->dev, "%s: virq = %d\n", __func__, virq); + + /* Setup msi address space */ + msg.address_hi = msi_data->msi_addr_hi; + msg.address_lo = msi_data->msi_addr_lo; + + irq_set_msi_desc(virq, entry); + msg.data = int_no; + write_msi_msg(virq, &msg); + } + return 0; +} + +void ppc4xx_teardown_msi_irqs(struct pci_dev *dev) +{ + struct msi_desc *entry; + struct ppc4xx_msi *msi_data = &ppc4xx_msi; + + dev_dbg(&dev->dev, "PCIE-MSI: tearing down msi irqs\n"); + + list_for_each_entry(entry, &dev->msi_list, list) { + if (entry->irq == NO_IRQ) + continue; + irq_set_msi_desc(entry->irq, NULL); + msi_bitmap_free_hwirqs(&msi_data->bitmap, + virq_to_hw(entry->irq), 1); + irq_dispose_mapping(entry->irq); + } +} + +static int ppc4xx_msi_check_device(struct pci_dev *pdev, int nvec, int type) +{ + dev_dbg(&pdev->dev, "PCIE-MSI:%s called. vec %x type %d\n", + __func__, nvec, type); + if (type == PCI_CAP_ID_MSIX) + pr_debug("ppc4xx msi: MSI-X untested, trying anyway.\n"); + + return 0; +} + +static int ppc4xx_setup_pcieh_hw(struct platform_device *dev, + struct resource res, struct ppc4xx_msi *msi) +{ + const u32 *msi_data; + const u32 *msi_mask; + const u32 *sdr_addr; + dma_addr_t msi_phys; + void *msi_virt; + + sdr_addr = of_get_property(dev->dev.of_node, "sdr-base", NULL); + if (!sdr_addr) + return -1; + + SDR0_WRITE(sdr_addr, (u64)res.start >> 32); /*HIGH addr */ + SDR0_WRITE(sdr_addr + 1, res.start & 0xFFFFFFFF); /* Low addr */ + + + msi->msi_dev = of_find_node_by_name(NULL, "ppc4xx-msi"); + if (msi->msi_dev) + return -ENODEV; + + msi->msi_regs = of_iomap(msi->msi_dev, 0); + if (!msi->msi_regs) { + dev_err(&dev->dev, "of_iomap problem failed\n"); + return -ENOMEM; + } + dev_dbg(&dev->dev, "PCIE-MSI: msi register mapped 0x%x 0x%x\n", + (u32) (msi->msi_regs + PEIH_TERMADH), (u32) (msi->msi_regs)); + + msi_virt = dma_alloc_coherent(&dev->dev, 64, &msi_phys, GFP_KERNEL); + msi->msi_addr_hi = 0x0; + msi->msi_addr_lo = (u32) msi_phys; + dev_dbg(&dev->dev, "PCIE-MSI: msi address 0x%x\n", msi->msi_addr_lo); + + /* Progam the Interrupt handler Termination addr registers */ + out_be32(msi->msi_regs + PEIH_TERMADH, msi->msi_addr_hi); + out_be32(msi->msi_regs + PEIH_TERMADL, msi->msi_addr_lo); + + msi_data = of_get_property(dev->dev.of_node, "msi-data", NULL); + if (!msi_data) + return -1; + msi_mask = of_get_property(dev->dev.of_node, "msi-mask", NULL); + if (!msi_mask) + return -1; + /* Program MSI Expected data and Mask bits */ + out_be32(msi->msi_regs + PEIH_MSIED, *msi_data); + out_be32(msi->msi_regs + PEIH_MSIMK, *msi_mask); + + return 0; +} + +static int ppc4xx_of_msi_remove(struct platform_device *dev) +{ + struct ppc4xx_msi *msi = dev->dev.platform_data; + int i; + int virq; + + for (i = 0; i < NR_MSI_IRQS; i++) { + virq = msi->msi_virqs[i]; + if (virq != NO_IRQ) + irq_dispose_mapping(virq); + } + + if (msi->bitmap.bitmap) + msi_bitmap_free(&msi->bitmap); + iounmap(msi->msi_regs); + of_node_put(msi->msi_dev); + kfree(msi); + + return 0; +} + +static int __devinit ppc4xx_msi_probe(struct platform_device *dev) +{ + struct ppc4xx_msi *msi; + struct resource res; + int err = 0; + + msi = &ppc4xx_msi;/*keep the msi data for further use*/ + + dev_dbg(&dev->dev, "PCIE-MSI: Setting up MSI support...\n"); + + msi = kzalloc(sizeof(struct ppc4xx_msi), GFP_KERNEL); + if (!msi) { + dev_err(&dev->dev, "No memory for MSI structure\n"); + return -ENOMEM; + } + dev->dev.platform_data = msi; + + /* Get MSI ranges */ + err = of_address_to_resource(dev->dev.of_node, 0, &res); + if (err) { + dev_err(&dev->dev, "%s resource error!\n", + dev->dev.of_node->full_name); + goto error_out; + } + + if (ppc4xx_setup_pcieh_hw(dev, res, msi)) + goto error_out; + + err = ppc4xx_msi_init_allocator(dev, msi); + if (err) { + dev_err(&dev->dev, "Error allocating MSI bitmap\n"); + goto error_out; + } + + ppc_md.setup_msi_irqs = ppc4xx_setup_msi_irqs; + ppc_md.teardown_msi_irqs = ppc4xx_teardown_msi_irqs; + ppc_md.msi_check_device = ppc4xx_msi_check_device; + return err; + +error_out: + ppc4xx_of_msi_remove(dev); + return err; +} +static const struct of_device_id ppc4xx_msi_ids[] = { + { + .compatible = "amcc,ppc4xx-msi", + }, + {} +}; +static struct platform_driver ppc4xx_msi_driver = { + .probe = ppc4xx_msi_probe, + .remove = ppc4xx_of_msi_remove, + .driver = { + .name = "ppc4xx-msi", + .owner = THIS_MODULE, + .of_match_table = ppc4xx_msi_ids, + }, + +}; + +static __init int ppc4xx_msi_init(void) +{ + return platform_driver_register(&ppc4xx_msi_driver); +} + +subsys_initcall(ppc4xx_msi_init); diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index ff2d237..9fab2aa 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -2,7 +2,7 @@ config MMU def_bool y config ZONE_DMA - def_bool y if 64BIT + def_bool y config LOCKDEP_SUPPORT def_bool y diff --git a/arch/s390/appldata/appldata_mem.c b/arch/s390/appldata/appldata_mem.c index e43fe75..f7d3dc5 100644 --- a/arch/s390/appldata/appldata_mem.c +++ b/arch/s390/appldata/appldata_mem.c @@ -92,9 +92,7 @@ static void appldata_get_mem_data(void *data) mem_data->pswpin = ev[PSWPIN]; mem_data->pswpout = ev[PSWPOUT]; mem_data->pgalloc = ev[PGALLOC_NORMAL]; -#ifdef CONFIG_ZONE_DMA mem_data->pgalloc += ev[PGALLOC_DMA]; -#endif mem_data->pgfault = ev[PGFAULT]; mem_data->pgmajfault = ev[PGMAJFAULT]; diff --git a/arch/s390/include/asm/bitops.h b/arch/s390/include/asm/bitops.h index e1c8f3a..667c6e9 100644 --- a/arch/s390/include/asm/bitops.h +++ b/arch/s390/include/asm/bitops.h @@ -621,6 +621,7 @@ static inline unsigned long find_first_zero_bit(const unsigned long *addr, bits = __ffz_word(bytes*8, __load_ulong_be(addr, bytes)); return (bits < size) ? bits : size; } +#define find_first_zero_bit find_first_zero_bit /** * find_first_bit - find the first set bit in a memory region @@ -641,6 +642,7 @@ static inline unsigned long find_first_bit(const unsigned long * addr, bits = __ffs_word(bytes*8, __load_ulong_be(addr, bytes)); return (bits < size) ? bits : size; } +#define find_first_bit find_first_bit /** * find_next_zero_bit - find the first zero bit in a memory region @@ -677,6 +679,7 @@ static inline int find_next_zero_bit (const unsigned long * addr, } return offset + find_first_zero_bit(p, size); } +#define find_next_zero_bit find_next_zero_bit /** * find_next_bit - find the first set bit in a memory region @@ -713,6 +716,7 @@ static inline int find_next_bit (const unsigned long * addr, } return offset + find_first_bit(p, size); } +#define find_next_bit find_next_bit /* * Every architecture must define this function. It's the fastest @@ -742,41 +746,6 @@ static inline int sched_find_first_bit(unsigned long *b) * 23 22 21 20 19 18 17 16 31 30 29 28 27 26 25 24 */ -static inline void __set_bit_le(unsigned long nr, void *addr) -{ - __set_bit(nr ^ (__BITOPS_WORDSIZE - 8), addr); -} - -static inline void __clear_bit_le(unsigned long nr, void *addr) -{ - __clear_bit(nr ^ (__BITOPS_WORDSIZE - 8), addr); -} - -static inline int __test_and_set_bit_le(unsigned long nr, void *addr) -{ - return __test_and_set_bit(nr ^ (__BITOPS_WORDSIZE - 8), addr); -} - -static inline int test_and_set_bit_le(unsigned long nr, void *addr) -{ - return test_and_set_bit(nr ^ (__BITOPS_WORDSIZE - 8), addr); -} - -static inline int __test_and_clear_bit_le(unsigned long nr, void *addr) -{ - return __test_and_clear_bit(nr ^ (__BITOPS_WORDSIZE - 8), addr); -} - -static inline int test_and_clear_bit_le(unsigned long nr, void *addr) -{ - return test_and_clear_bit(nr ^ (__BITOPS_WORDSIZE - 8), addr); -} - -static inline int test_bit_le(unsigned long nr, const void *addr) -{ - return test_bit(nr ^ (__BITOPS_WORDSIZE - 8), addr); -} - static inline int find_first_zero_bit_le(void *vaddr, unsigned int size) { unsigned long bytes, bits; @@ -787,6 +756,7 @@ static inline int find_first_zero_bit_le(void *vaddr, unsigned int size) bits = __ffz_word(bytes*8, __load_ulong_le(vaddr, bytes)); return (bits < size) ? bits : size; } +#define find_first_zero_bit_le find_first_zero_bit_le static inline int find_next_zero_bit_le(void *vaddr, unsigned long size, unsigned long offset) @@ -816,6 +786,7 @@ static inline int find_next_zero_bit_le(void *vaddr, unsigned long size, } return offset + find_first_zero_bit_le(p, size); } +#define find_next_zero_bit_le find_next_zero_bit_le static inline unsigned long find_first_bit_le(void *vaddr, unsigned long size) { @@ -827,6 +798,7 @@ static inline unsigned long find_first_bit_le(void *vaddr, unsigned long size) bits = __ffs_word(bytes*8, __load_ulong_le(vaddr, bytes)); return (bits < size) ? bits : size; } +#define find_first_bit_le find_first_bit_le static inline int find_next_bit_le(void *vaddr, unsigned long size, unsigned long offset) @@ -856,6 +828,9 @@ static inline int find_next_bit_le(void *vaddr, unsigned long size, } return offset + find_first_bit_le(p, size); } +#define find_next_bit_le find_next_bit_le + +#include <asm-generic/bitops/le.h> #define ext2_set_bit_atomic(lock, nr, addr) \ test_and_set_bit_le(nr, addr) diff --git a/arch/s390/include/asm/delay.h b/arch/s390/include/asm/delay.h index 8a096b8..0e3b35f 100644 --- a/arch/s390/include/asm/delay.h +++ b/arch/s390/include/asm/delay.h @@ -14,10 +14,12 @@ #ifndef _S390_DELAY_H #define _S390_DELAY_H -extern void __udelay(unsigned long long usecs); -extern void udelay_simple(unsigned long long usecs); -extern void __delay(unsigned long loops); +void __ndelay(unsigned long long nsecs); +void __udelay(unsigned long long usecs); +void udelay_simple(unsigned long long usecs); +void __delay(unsigned long loops); +#define ndelay(n) __ndelay((unsigned long long) (n)) #define udelay(n) __udelay((unsigned long long) (n)) #define mdelay(n) __udelay((unsigned long long) (n) * 1000) diff --git a/arch/s390/include/asm/irq.h b/arch/s390/include/asm/irq.h index 1544b90..ba7b01c 100644 --- a/arch/s390/include/asm/irq.h +++ b/arch/s390/include/asm/irq.h @@ -2,6 +2,7 @@ #define _ASM_IRQ_H #include <linux/hardirq.h> +#include <linux/types.h> enum interruption_class { EXTERNAL_INTERRUPT, @@ -31,4 +32,11 @@ enum interruption_class { NR_IRQS, }; +typedef void (*ext_int_handler_t)(unsigned int, unsigned int, unsigned long); + +int register_external_interrupt(u16 code, ext_int_handler_t handler); +int unregister_external_interrupt(u16 code, ext_int_handler_t handler); +void service_subclass_irq_register(void); +void service_subclass_irq_unregister(void); + #endif /* _ASM_IRQ_H */ diff --git a/arch/s390/include/asm/s390_ext.h b/arch/s390/include/asm/s390_ext.h deleted file mode 100644 index 080876d..0000000 --- a/arch/s390/include/asm/s390_ext.h +++ /dev/null @@ -1,17 +0,0 @@ -/* - * Copyright IBM Corp. 1999,2010 - * Author(s): Holger Smolinski <Holger.Smolinski@de.ibm.com>, - * Martin Schwidefsky <schwidefsky@de.ibm.com>, - */ - -#ifndef _S390_EXTINT_H -#define _S390_EXTINT_H - -#include <linux/types.h> - -typedef void (*ext_int_handler_t)(unsigned int, unsigned int, unsigned long); - -int register_external_interrupt(__u16 code, ext_int_handler_t handler); -int unregister_external_interrupt(__u16 code, ext_int_handler_t handler); - -#endif /* _S390_EXTINT_H */ diff --git a/arch/s390/include/asm/suspend.h b/arch/s390/include/asm/suspend.h deleted file mode 100644 index dc75c61..0000000 --- a/arch/s390/include/asm/suspend.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef __ASM_S390_SUSPEND_H -#define __ASM_S390_SUSPEND_H - -static inline int arch_prepare_suspend(void) -{ - return 0; -} - -#endif - diff --git a/arch/s390/include/asm/topology.h b/arch/s390/include/asm/topology.h index c533883..005d77d 100644 --- a/arch/s390/include/asm/topology.h +++ b/arch/s390/include/asm/topology.h @@ -7,7 +7,7 @@ extern unsigned char cpu_core_id[NR_CPUS]; extern cpumask_t cpu_core_map[NR_CPUS]; -static inline const struct cpumask *cpu_coregroup_mask(unsigned int cpu) +static inline const struct cpumask *cpu_coregroup_mask(int cpu) { return &cpu_core_map[cpu]; } @@ -21,7 +21,7 @@ static inline const struct cpumask *cpu_coregroup_mask(unsigned int cpu) extern unsigned char cpu_book_id[NR_CPUS]; extern cpumask_t cpu_book_map[NR_CPUS]; -static inline const struct cpumask *cpu_book_mask(unsigned int cpu) +static inline const struct cpumask *cpu_book_mask(int cpu) { return &cpu_book_map[cpu]; } diff --git a/arch/s390/include/asm/uaccess.h b/arch/s390/include/asm/uaccess.h index 2d9ea11f..2b23885 100644 --- a/arch/s390/include/asm/uaccess.h +++ b/arch/s390/include/asm/uaccess.h @@ -49,12 +49,13 @@ #define segment_eq(a,b) ((a).ar4 == (b).ar4) +#define __access_ok(addr, size) \ +({ \ + __chk_user_ptr(addr); \ + 1; \ +}) -static inline int __access_ok(const void __user *addr, unsigned long size) -{ - return 1; -} -#define access_ok(type,addr,size) __access_ok(addr,size) +#define access_ok(type, addr, size) __access_ok(addr, size) /* * The exception table consists of pairs of addresses: the first is the diff --git a/arch/s390/kernel/Makefile b/arch/s390/kernel/Makefile index 5ff15da..df37322 100644 --- a/arch/s390/kernel/Makefile +++ b/arch/s390/kernel/Makefile @@ -20,10 +20,10 @@ CFLAGS_ptrace.o += -DUTS_MACHINE='"$(UTS_MACHINE)"' CFLAGS_sysinfo.o += -Iinclude/math-emu -Iarch/s390/math-emu -w -obj-y := bitmap.o traps.o time.o process.o base.o early.o setup.o \ - processor.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o \ - s390_ext.o debug.o irq.o ipl.o dis.o diag.o mem_detect.o \ - vdso.o vtime.o sysinfo.o nmi.o sclp.o jump_label.o +obj-y := bitmap.o traps.o time.o process.o base.o early.o setup.o vtime.o \ + processor.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o nmi.o \ + debug.o irq.o ipl.o dis.o diag.o mem_detect.o sclp.o vdso.o \ + sysinfo.o jump_label.o obj-y += $(if $(CONFIG_64BIT),entry64.o,entry.o) obj-y += $(if $(CONFIG_64BIT),reipl64.o,reipl.o) diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c index 3d4a78f..1ca3d1d 100644 --- a/arch/s390/kernel/dis.c +++ b/arch/s390/kernel/dis.c @@ -30,9 +30,9 @@ #include <asm/atomic.h> #include <asm/mathemu.h> #include <asm/cpcmd.h> -#include <asm/s390_ext.h> #include <asm/lowcore.h> #include <asm/debug.h> +#include <asm/irq.h> #ifndef CONFIG_64BIT #define ONELONG "%08lx: " diff --git a/arch/s390/kernel/irq.c b/arch/s390/kernel/irq.c index e204f95..e3264f6 100644 --- a/arch/s390/kernel/irq.c +++ b/arch/s390/kernel/irq.c @@ -1,19 +1,28 @@ /* - * Copyright IBM Corp. 2004,2010 - * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com), - * Thomas Spatzier (tspat@de.ibm.com) + * Copyright IBM Corp. 2004,2011 + * Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>, + * Holger Smolinski <Holger.Smolinski@de.ibm.com>, + * Thomas Spatzier <tspat@de.ibm.com>, * * This file contains interrupt related functions. */ -#include <linux/module.h> -#include <linux/kernel.h> #include <linux/kernel_stat.h> #include <linux/interrupt.h> #include <linux/seq_file.h> -#include <linux/cpu.h> #include <linux/proc_fs.h> #include <linux/profile.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/ftrace.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/cpu.h> +#include <asm/irq_regs.h> +#include <asm/cputime.h> +#include <asm/lowcore.h> +#include <asm/irq.h> +#include "entry.h" struct irq_class { char *name; @@ -82,8 +91,7 @@ int show_interrupts(struct seq_file *p, void *v) * For compatibilty only. S/390 specific setup of interrupts et al. is done * much later in init_channel_subsystem(). */ -void __init -init_IRQ(void) +void __init init_IRQ(void) { /* nothing... */ } @@ -134,3 +142,116 @@ void init_irq_proc(void) create_prof_cpu_mask(root_irq_dir); } #endif + +/* + * ext_int_hash[index] is the start of the list for all external interrupts + * that hash to this index. With the current set of external interrupts + * (0x1202 external call, 0x1004 cpu timer, 0x2401 hwc console, 0x4000 + * iucv and 0x2603 pfault) this is always the first element. + */ + +struct ext_int_info { + struct ext_int_info *next; + ext_int_handler_t handler; + u16 code; +}; + +static struct ext_int_info *ext_int_hash[256]; + +static inline int ext_hash(u16 code) +{ + return (code + (code >> 9)) & 0xff; +} + +int register_external_interrupt(u16 code, ext_int_handler_t handler) +{ + struct ext_int_info *p; + int index; + + p = kmalloc(sizeof(*p), GFP_ATOMIC); + if (!p) + return -ENOMEM; + p->code = code; + p->handler = handler; + index = ext_hash(code); + p->next = ext_int_hash[index]; + ext_int_hash[index] = p; + return 0; +} +EXPORT_SYMBOL(register_external_interrupt); + +int unregister_external_interrupt(u16 code, ext_int_handler_t handler) +{ + struct ext_int_info *p, *q; + int index; + + index = ext_hash(code); + q = NULL; + p = ext_int_hash[index]; + while (p) { + if (p->code == code && p->handler == handler) + break; + q = p; + p = p->next; + } + if (!p) + return -ENOENT; + if (q) + q->next = p->next; + else + ext_int_hash[index] = p->next; + kfree(p); + return 0; +} +EXPORT_SYMBOL(unregister_external_interrupt); + +void __irq_entry do_extint(struct pt_regs *regs, unsigned int ext_int_code, + unsigned int param32, unsigned long param64) +{ + struct pt_regs *old_regs; + unsigned short code; + struct ext_int_info *p; + int index; + + code = (unsigned short) ext_int_code; + old_regs = set_irq_regs(regs); + s390_idle_check(regs, S390_lowcore.int_clock, + S390_lowcore.async_enter_timer); + irq_enter(); + if (S390_lowcore.int_clock >= S390_lowcore.clock_comparator) + /* Serve timer interrupts first. */ + clock_comparator_work(); + kstat_cpu(smp_processor_id()).irqs[EXTERNAL_INTERRUPT]++; + if (code != 0x1004) + __get_cpu_var(s390_idle).nohz_delay = 1; + index = ext_hash(code); + for (p = ext_int_hash[index]; p; p = p->next) { + if (likely(p->code == code)) + p->handler(ext_int_code, param32, param64); + } + irq_exit(); + set_irq_regs(old_regs); +} + +static DEFINE_SPINLOCK(sc_irq_lock); +static int sc_irq_refcount; + +void service_subclass_irq_register(void) +{ + spin_lock(&sc_irq_lock); + if (!sc_irq_refcount) + ctl_set_bit(0, 9); + sc_irq_refcount++; + spin_unlock(&sc_irq_lock); +} +EXPORT_SYMBOL(service_subclass_irq_register); + +void service_subclass_irq_unregister(void) +{ + spin_lock(&sc_irq_lock); + sc_irq_refcount--; + if (!sc_irq_refcount) + ctl_clear_bit(0, 9); + spin_unlock(&sc_irq_lock); +} +EXPORT_SYMBOL(service_subclass_irq_unregister); diff --git a/arch/s390/kernel/s390_ext.c b/arch/s390/kernel/s390_ext.c deleted file mode 100644 index 1850299..0000000 --- a/arch/s390/kernel/s390_ext.c +++ /dev/null @@ -1,108 +0,0 @@ -/* - * Copyright IBM Corp. 1999,2010 - * Author(s): Holger Smolinski <Holger.Smolinski@de.ibm.com>, - * Martin Schwidefsky <schwidefsky@de.ibm.com>, - */ - -#include <linux/kernel_stat.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/ftrace.h> -#include <linux/errno.h> -#include <linux/slab.h> -#include <asm/s390_ext.h> -#include <asm/irq_regs.h> -#include <asm/cputime.h> -#include <asm/lowcore.h> -#include <asm/irq.h> -#include "entry.h" - -struct ext_int_info { - struct ext_int_info *next; - ext_int_handler_t handler; - __u16 code; -}; - -/* - * ext_int_hash[index] is the start of the list for all external interrupts - * that hash to this index. With the current set of external interrupts - * (0x1202 external call, 0x1004 cpu timer, 0x2401 hwc console, 0x4000 - * iucv and 0x2603 pfault) this is always the first element. - */ -static struct ext_int_info *ext_int_hash[256]; - -static inline int ext_hash(__u16 code) -{ - return (code + (code >> 9)) & 0xff; -} - -int register_external_interrupt(__u16 code, ext_int_handler_t handler) -{ - struct ext_int_info *p; - int index; - - p = kmalloc(sizeof(*p), GFP_ATOMIC); - if (!p) - return -ENOMEM; - p->code = code; - p->handler = handler; - index = ext_hash(code); - p->next = ext_int_hash[index]; - ext_int_hash[index] = p; - return 0; -} -EXPORT_SYMBOL(register_external_interrupt); - -int unregister_external_interrupt(__u16 code, ext_int_handler_t handler) -{ - struct ext_int_info *p, *q; - int index; - - index = ext_hash(code); - q = NULL; - p = ext_int_hash[index]; - while (p) { - if (p->code == code && p->handler == handler) - break; - q = p; - p = p->next; - } - if (!p) - return -ENOENT; - if (q) - q->next = p->next; - else - ext_int_hash[index] = p->next; - kfree(p); - return 0; -} -EXPORT_SYMBOL(unregister_external_interrupt); - -void __irq_entry do_extint(struct pt_regs *regs, unsigned int ext_int_code, - unsigned int param32, unsigned long param64) -{ - struct pt_regs *old_regs; - unsigned short code; - struct ext_int_info *p; - int index; - - code = (unsigned short) ext_int_code; - old_regs = set_irq_regs(regs); - s390_idle_check(regs, S390_lowcore.int_clock, - S390_lowcore.async_enter_timer); - irq_enter(); - if (S390_lowcore.int_clock >= S390_lowcore.clock_comparator) - /* Serve timer interrupts first. */ - clock_comparator_work(); - kstat_cpu(smp_processor_id()).irqs[EXTERNAL_INTERRUPT]++; - if (code != 0x1004) - __get_cpu_var(s390_idle).nohz_delay = 1; - index = ext_hash(code); - for (p = ext_int_hash[index]; p; p = p->next) { - if (likely(p->code == code)) - p->handler(ext_int_code, param32, param64); - } - irq_exit(); - set_irq_regs(old_regs); -} diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index f8e85ec..52420d2 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -44,7 +44,6 @@ #include <asm/sigp.h> #include <asm/pgalloc.h> #include <asm/irq.h> -#include <asm/s390_ext.h> #include <asm/cpcmd.h> #include <asm/tlbflush.h> #include <asm/timer.h> diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index a59557f..dff9330 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -41,7 +41,6 @@ #include <linux/kprobes.h> #include <asm/uaccess.h> #include <asm/delay.h> -#include <asm/s390_ext.h> #include <asm/div64.h> #include <asm/vdso.h> #include <asm/irq.h> diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c index 2eafb8c..0cd340b7 100644 --- a/arch/s390/kernel/topology.c +++ b/arch/s390/kernel/topology.c @@ -17,7 +17,6 @@ #include <linux/smp.h> #include <linux/cpuset.h> #include <asm/delay.h> -#include <asm/s390_ext.h> #define PTF_HORIZONTAL (0UL) #define PTF_VERTICAL (1UL) diff --git a/arch/s390/kernel/traps.c b/arch/s390/kernel/traps.c index b5a4a73..a65d2e8 100644 --- a/arch/s390/kernel/traps.c +++ b/arch/s390/kernel/traps.c @@ -39,7 +39,6 @@ #include <asm/atomic.h> #include <asm/mathemu.h> #include <asm/cpcmd.h> -#include <asm/s390_ext.h> #include <asm/lowcore.h> #include <asm/debug.h> #include "entry.h" diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c index 5e8ead4..2d6228f 100644 --- a/arch/s390/kernel/vtime.c +++ b/arch/s390/kernel/vtime.c @@ -22,10 +22,10 @@ #include <linux/cpu.h> #include <linux/kprobes.h> -#include <asm/s390_ext.h> #include <asm/timer.h> #include <asm/irq_regs.h> #include <asm/cputime.h> +#include <asm/irq.h> static DEFINE_PER_CPU(struct vtimer_queue, virt_cpu_timer); diff --git a/arch/s390/lib/delay.c b/arch/s390/lib/delay.c index 0f53110..a65229d 100644 --- a/arch/s390/lib/delay.c +++ b/arch/s390/lib/delay.c @@ -12,6 +12,7 @@ #include <linux/module.h> #include <linux/irqflags.h> #include <linux/interrupt.h> +#include <asm/div64.h> void __delay(unsigned long loops) { @@ -116,3 +117,17 @@ void udelay_simple(unsigned long long usecs) while (get_clock() < end) cpu_relax(); } + +void __ndelay(unsigned long long nsecs) +{ + u64 end; + + nsecs <<= 9; + do_div(nsecs, 125); + end = get_clock() + nsecs; + if (nsecs & ~0xfffUL) + __udelay(nsecs >> 12); + while (get_clock() < end) + barrier(); +} +EXPORT_SYMBOL(__ndelay); diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c index a0f9e73..fe103e8 100644 --- a/arch/s390/mm/fault.c +++ b/arch/s390/mm/fault.c @@ -34,7 +34,7 @@ #include <asm/asm-offsets.h> #include <asm/system.h> #include <asm/pgtable.h> -#include <asm/s390_ext.h> +#include <asm/irq.h> #include <asm/mmu_context.h> #include <asm/compat.h> #include "../kernel/entry.h" @@ -245,9 +245,12 @@ static noinline void do_fault_error(struct pt_regs *regs, long int_code, do_no_context(regs, int_code, trans_exc_code); break; default: /* fault & VM_FAULT_ERROR */ - if (fault & VM_FAULT_OOM) - pagefault_out_of_memory(); - else if (fault & VM_FAULT_SIGBUS) { + if (fault & VM_FAULT_OOM) { + if (!(regs->psw.mask & PSW_MASK_PSTATE)) + do_no_context(regs, int_code, trans_exc_code); + else + pagefault_out_of_memory(); + } else if (fault & VM_FAULT_SIGBUS) { /* Kernel mode? Handle exceptions or die */ if (!(regs->psw.mask & PSW_MASK_PSTATE)) do_no_context(regs, int_code, trans_exc_code); @@ -277,7 +280,8 @@ static inline int do_exception(struct pt_regs *regs, int access, struct mm_struct *mm; struct vm_area_struct *vma; unsigned long address; - int fault, write; + unsigned int flags; + int fault; if (notify_page_fault(regs)) return 0; @@ -296,6 +300,10 @@ static inline int do_exception(struct pt_regs *regs, int access, address = trans_exc_code & __FAIL_ADDR_MASK; perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, address); + flags = FAULT_FLAG_ALLOW_RETRY; + if (access == VM_WRITE || (trans_exc_code & store_indication) == 0x400) + flags |= FAULT_FLAG_WRITE; +retry: down_read(&mm->mmap_sem); fault = VM_FAULT_BADMAP; @@ -325,21 +333,31 @@ static inline int do_exception(struct pt_regs *regs, int access, * make sure we exit gracefully rather than endlessly redo * the fault. */ - write = (access == VM_WRITE || - (trans_exc_code & store_indication) == 0x400) ? - FAULT_FLAG_WRITE : 0; - fault = handle_mm_fault(mm, vma, address, write); + fault = handle_mm_fault(mm, vma, address, flags); if (unlikely(fault & VM_FAULT_ERROR)) goto out_up; - if (fault & VM_FAULT_MAJOR) { - tsk->maj_flt++; - perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0, - regs, address); - } else { - tsk->min_flt++; - perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0, - regs, address); + /* + * Major/minor page fault accounting is only done on the + * initial attempt. If we go through a retry, it is extremely + * likely that the page will be found in page cache at that point. + */ + if (flags & FAULT_FLAG_ALLOW_RETRY) { + if (fault & VM_FAULT_MAJOR) { + tsk->maj_flt++; + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0, + regs, address); + } else { + tsk->min_flt++; + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0, + regs, address); + } + if (fault & VM_FAULT_RETRY) { + /* Clear FAULT_FLAG_ALLOW_RETRY to avoid any risk + * of starvation. */ + flags &= ~FAULT_FLAG_ALLOW_RETRY; + goto retry; + } } /* * The instruction that caused the program check will @@ -429,10 +447,9 @@ int __handle_fault(unsigned long uaddr, unsigned long pgm_int_code, int write) access = write ? VM_WRITE : VM_READ; fault = do_exception(®s, access, uaddr | 2); if (unlikely(fault)) { - if (fault & VM_FAULT_OOM) { - pagefault_out_of_memory(); - fault = 0; - } else if (fault & VM_FAULT_SIGBUS) + if (fault & VM_FAULT_OOM) + return -EFAULT; + else if (fault & VM_FAULT_SIGBUS) do_sigbus(®s, pgm_int_code, uaddr); } return fault ? -EFAULT : 0; @@ -485,7 +502,6 @@ int pfault_init(void) "2:\n" EX_TABLE(0b,1b) : "=d" (rc) : "a" (&refbk), "m" (refbk) : "cc"); - __ctl_set_bit(0, 9); return rc; } @@ -500,7 +516,6 @@ void pfault_fini(void) if (!MACHINE_IS_VM || pfault_disable) return; - __ctl_clear_bit(0,9); asm volatile( " diag %0,0,0x258\n" "0:\n" @@ -615,6 +630,7 @@ static int __init pfault_irq_init(void) rc = pfault_init() == 0 ? 0 : -EOPNOTSUPP; if (rc) goto out_pfault; + service_subclass_irq_register(); hotcpu_notifier(pfault_cpu_notify, 0); return 0; diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c index dfefc21..59b6631 100644 --- a/arch/s390/mm/init.c +++ b/arch/s390/mm/init.c @@ -119,9 +119,7 @@ void __init paging_init(void) sparse_memory_present_with_active_regions(MAX_NUMNODES); sparse_init(); memset(max_zone_pfns, 0, sizeof(max_zone_pfns)); -#ifdef CONFIG_ZONE_DMA max_zone_pfns[ZONE_DMA] = PFN_DOWN(MAX_DMA_ADDRESS); -#endif max_zone_pfns[ZONE_NORMAL] = max_low_pfn; free_area_init_nodes(max_zone_pfns); fault_init(); diff --git a/arch/s390/oprofile/hwsampler.c b/arch/s390/oprofile/hwsampler.c index 053caa0..4552ce4 100644 --- a/arch/s390/oprofile/hwsampler.c +++ b/arch/s390/oprofile/hwsampler.c @@ -19,7 +19,7 @@ #include <linux/oprofile.h> #include <asm/lowcore.h> -#include <asm/s390_ext.h> +#include <asm/irq.h> #include "hwsampler.h" @@ -580,7 +580,7 @@ static int hws_cpu_callback(struct notifier_block *nfb, { /* We do not have sampler space available for all possible CPUs. All CPUs should be online when hw sampling is activated. */ - return NOTIFY_BAD; + return (hws_state <= HWS_DEALLOCATED) ? NOTIFY_OK : NOTIFY_BAD; } static struct notifier_block hws_cpu_notifier = { diff --git a/arch/score/Kconfig b/arch/score/Kconfig index e73bc78..288add8 100644 --- a/arch/score/Kconfig +++ b/arch/score/Kconfig @@ -43,9 +43,6 @@ config NO_DMA config RWSEM_GENERIC_SPINLOCK def_bool y -config GENERIC_FIND_NEXT_BIT - def_bool y - config GENERIC_HWEIGHT def_bool y diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index b44e377..74495a5 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -71,12 +71,6 @@ config GENERIC_CSUM def_bool y depends on SUPERH64 -config GENERIC_FIND_NEXT_BIT - def_bool y - -config GENERIC_FIND_BIT_LE - def_bool y - config GENERIC_HWEIGHT def_bool y diff --git a/arch/sh/configs/apsh4ad0a_defconfig b/arch/sh/configs/apsh4ad0a_defconfig index 77ec0e7..e758348 100644 --- a/arch/sh/configs/apsh4ad0a_defconfig +++ b/arch/sh/configs/apsh4ad0a_defconfig @@ -7,7 +7,6 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CGROUPS=y -CONFIG_CGROUP_NS=y CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_DEVICE=y CONFIG_CGROUP_CPUACCT=y diff --git a/arch/sh/configs/sdk7786_defconfig b/arch/sh/configs/sdk7786_defconfig index c416505..8a7dd7b 100644 --- a/arch/sh/configs/sdk7786_defconfig +++ b/arch/sh/configs/sdk7786_defconfig @@ -12,7 +12,6 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_CGROUPS=y CONFIG_CGROUP_DEBUG=y -CONFIG_CGROUP_NS=y CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_DEVICE=y CONFIG_CPUSETS=y diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig index a468ff2..72c3fad 100644 --- a/arch/sh/configs/se7206_defconfig +++ b/arch/sh/configs/se7206_defconfig @@ -8,7 +8,6 @@ CONFIG_RCU_TRACE=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CGROUPS=y CONFIG_CGROUP_DEBUG=y -CONFIG_CGROUP_NS=y CONFIG_CGROUP_DEVICE=y CONFIG_CGROUP_CPUACCT=y CONFIG_RESOURCE_COUNTERS=y diff --git a/arch/sh/configs/shx3_defconfig b/arch/sh/configs/shx3_defconfig index 3f92d37..6bb4130 100644 --- a/arch/sh/configs/shx3_defconfig +++ b/arch/sh/configs/shx3_defconfig @@ -9,7 +9,6 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CGROUPS=y -CONFIG_CGROUP_NS=y CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_DEVICE=y CONFIG_CGROUP_CPUACCT=y diff --git a/arch/sh/configs/urquell_defconfig b/arch/sh/configs/urquell_defconfig index 7b3daec..8bfa4d0 100644 --- a/arch/sh/configs/urquell_defconfig +++ b/arch/sh/configs/urquell_defconfig @@ -9,7 +9,6 @@ CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_CGROUPS=y CONFIG_CGROUP_DEBUG=y -CONFIG_CGROUP_NS=y CONFIG_CGROUP_FREEZER=y CONFIG_CGROUP_DEVICE=y CONFIG_CPUSETS=y diff --git a/arch/sh/include/asm/kgdb.h b/arch/sh/include/asm/kgdb.h index 4235e22..f361395 100644 --- a/arch/sh/include/asm/kgdb.h +++ b/arch/sh/include/asm/kgdb.h @@ -34,5 +34,6 @@ static inline void arch_kgdb_breakpoint(void) #define CACHE_FLUSH_IS_SAFE 1 #define BREAK_INSTR_SIZE 2 +#define GDB_ADJUSTS_BREAK_OFFSET #endif /* __ASM_SH_KGDB_H */ diff --git a/arch/sh/include/asm/ptrace.h b/arch/sh/include/asm/ptrace.h index de167d3..40725b4 100644 --- a/arch/sh/include/asm/ptrace.h +++ b/arch/sh/include/asm/ptrace.h @@ -40,9 +40,8 @@ #include <asm/system.h> #define user_mode(regs) (((regs)->sr & 0x40000000)==0) -#define user_stack_pointer(_regs) ((unsigned long)(_regs)->regs[15]) #define kernel_stack_pointer(_regs) ((unsigned long)(_regs)->regs[15]) -#define instruction_pointer(regs) ((unsigned long)(regs)->pc) +#define GET_USP(regs) ((regs)->regs[15]) extern void show_regs(struct pt_regs *); @@ -139,6 +138,9 @@ static inline unsigned long profile_pc(struct pt_regs *regs) return pc; } +#define profile_pc profile_pc + +#include <asm-generic/ptrace.h> #endif /* __KERNEL__ */ #endif /* __ASM_SH_PTRACE_H */ diff --git a/arch/sh/include/asm/suspend.h b/arch/sh/include/asm/suspend.h index 64eb41a..e14567a 100644 --- a/arch/sh/include/asm/suspend.h +++ b/arch/sh/include/asm/suspend.h @@ -3,7 +3,6 @@ #ifndef __ASSEMBLY__ #include <linux/notifier.h> -static inline int arch_prepare_suspend(void) { return 0; } #include <asm/ptrace.h> diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index 63a027c..af32e17 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -190,14 +190,6 @@ config RWSEM_XCHGADD_ALGORITHM bool default y if SPARC64 -config GENERIC_FIND_NEXT_BIT - bool - default y - -config GENERIC_FIND_BIT_LE - bool - default y - config GENERIC_HWEIGHT bool default y if !ULTRA_HAS_POPULATION_COUNT diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig index 635e1bf..e1e5010 100644 --- a/arch/tile/Kconfig +++ b/arch/tile/Kconfig @@ -5,7 +5,6 @@ config TILE def_bool y select HAVE_KVM if !TILEGX select GENERIC_FIND_FIRST_BIT - select GENERIC_FIND_NEXT_BIT select USE_GENERIC_SMP_HELPERS select CC_OPTIMIZE_FOR_SIZE select HAVE_GENERIC_HARDIRQS diff --git a/arch/um/Kconfig.x86 b/arch/um/Kconfig.x86 index 795ea8e..8aae429 100644 --- a/arch/um/Kconfig.x86 +++ b/arch/um/Kconfig.x86 @@ -15,7 +15,6 @@ endmenu config UML_X86 def_bool y select GENERIC_FIND_FIRST_BIT - select GENERIC_FIND_NEXT_BIT config 64BIT bool diff --git a/arch/unicore32/include/asm/suspend.h b/arch/unicore32/include/asm/suspend.h index 88a9c0f..65bad75 100644 --- a/arch/unicore32/include/asm/suspend.h +++ b/arch/unicore32/include/asm/suspend.h @@ -14,7 +14,6 @@ #define __UNICORE_SUSPEND_H__ #ifndef __ASSEMBLY__ -static inline int arch_prepare_suspend(void) { return 0; } #include <asm/ptrace.h> diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 483775f..da34972 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -64,7 +64,6 @@ config X86 select HAVE_GENERIC_HARDIRQS select HAVE_SPARSE_IRQ select GENERIC_FIND_FIRST_BIT - select GENERIC_FIND_NEXT_BIT select GENERIC_IRQ_PROBE select GENERIC_PENDING_IRQ if SMP select GENERIC_IRQ_SHOW diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig index 6f98726..2bf18059f 100644 --- a/arch/x86/configs/i386_defconfig +++ b/arch/x86/configs/i386_defconfig @@ -10,7 +10,6 @@ CONFIG_TASK_IO_ACCOUNTING=y CONFIG_AUDIT=y CONFIG_LOG_BUF_SHIFT=18 CONFIG_CGROUPS=y -CONFIG_CGROUP_NS=y CONFIG_CGROUP_FREEZER=y CONFIG_CPUSETS=y CONFIG_CGROUP_CPUACCT=y diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig index ee01a9d..22a0dc8 100644 --- a/arch/x86/configs/x86_64_defconfig +++ b/arch/x86/configs/x86_64_defconfig @@ -11,7 +11,6 @@ CONFIG_TASK_IO_ACCOUNTING=y CONFIG_AUDIT=y CONFIG_LOG_BUF_SHIFT=18 CONFIG_CGROUPS=y -CONFIG_CGROUP_NS=y CONFIG_CGROUP_FREEZER=y CONFIG_CPUSETS=y CONFIG_CGROUP_CPUACCT=y diff --git a/arch/x86/include/asm/kgdb.h b/arch/x86/include/asm/kgdb.h index 396f5b5..77e95f5 100644 --- a/arch/x86/include/asm/kgdb.h +++ b/arch/x86/include/asm/kgdb.h @@ -77,6 +77,7 @@ static inline void arch_kgdb_breakpoint(void) } #define BREAK_INSTR_SIZE 1 #define CACHE_FLUSH_IS_SAFE 1 +#define GDB_ADJUSTS_BREAK_OFFSET extern int kgdb_ll_trap(int cmd, const char *str, struct pt_regs *regs, long err, int trap, int sig); diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h index 1babf8a..94e7618 100644 --- a/arch/x86/include/asm/ptrace.h +++ b/arch/x86/include/asm/ptrace.h @@ -136,6 +136,7 @@ struct cpuinfo_x86; struct task_struct; extern unsigned long profile_pc(struct pt_regs *regs); +#define profile_pc profile_pc extern unsigned long convert_ip_to_linear(struct task_struct *child, struct pt_regs *regs); @@ -202,20 +203,11 @@ static inline unsigned long kernel_stack_pointer(struct pt_regs *regs) #endif } -static inline unsigned long instruction_pointer(struct pt_regs *regs) -{ - return regs->ip; -} - -static inline unsigned long frame_pointer(struct pt_regs *regs) -{ - return regs->bp; -} +#define GET_IP(regs) ((regs)->ip) +#define GET_FP(regs) ((regs)->bp) +#define GET_USP(regs) ((regs)->sp) -static inline unsigned long user_stack_pointer(struct pt_regs *regs) -{ - return regs->sp; -} +#include <asm-generic/ptrace.h> /* Query offset/name of register from its name/offset */ extern int regs_query_register_offset(const char *name); diff --git a/arch/x86/include/asm/suspend_32.h b/arch/x86/include/asm/suspend_32.h index fd921c3..487055c 100644 --- a/arch/x86/include/asm/suspend_32.h +++ b/arch/x86/include/asm/suspend_32.h @@ -9,8 +9,6 @@ #include <asm/desc.h> #include <asm/i387.h> -static inline int arch_prepare_suspend(void) { return 0; } - /* image of the saved processor state */ struct saved_context { u16 es, fs, gs, ss; diff --git a/arch/x86/include/asm/suspend_64.h b/arch/x86/include/asm/suspend_64.h index 8d942af..09b0bf1 100644 --- a/arch/x86/include/asm/suspend_64.h +++ b/arch/x86/include/asm/suspend_64.h @@ -9,11 +9,6 @@ #include <asm/desc.h> #include <asm/i387.h> -static inline int arch_prepare_suspend(void) -{ - return 0; -} - /* * Image of the saved processor state, used by the low level ACPI suspend to * RAM code and by the low level hibernation code. diff --git a/arch/x86/include/asm/tsc.h b/arch/x86/include/asm/tsc.h index 83e2efd..9db5583 100644 --- a/arch/x86/include/asm/tsc.h +++ b/arch/x86/include/asm/tsc.h @@ -51,6 +51,10 @@ extern int unsynchronized_tsc(void); extern int check_tsc_unstable(void); extern unsigned long native_calibrate_tsc(void); +#ifdef CONFIG_X86_64 +extern cycles_t vread_tsc(void); +#endif + /* * Boot-time check whether the TSCs are synchronized across * all CPUs/cores: diff --git a/arch/x86/include/asm/vdso.h b/arch/x86/include/asm/vdso.h index 9064052..bb05228 100644 --- a/arch/x86/include/asm/vdso.h +++ b/arch/x86/include/asm/vdso.h @@ -1,20 +1,6 @@ #ifndef _ASM_X86_VDSO_H #define _ASM_X86_VDSO_H -#ifdef CONFIG_X86_64 -extern const char VDSO64_PRELINK[]; - -/* - * Given a pointer to the vDSO image, find the pointer to VDSO64_name - * as that symbol is defined in the vDSO sources or linker script. - */ -#define VDSO64_SYMBOL(base, name) \ -({ \ - extern const char VDSO64_##name[]; \ - (void *)(VDSO64_##name - VDSO64_PRELINK + (unsigned long)(base)); \ -}) -#endif - #if defined CONFIG_X86_32 || defined CONFIG_COMPAT extern const char VDSO32_PRELINK[]; diff --git a/arch/x86/include/asm/vgtod.h b/arch/x86/include/asm/vgtod.h index 3d61e20..646b4c1 100644 --- a/arch/x86/include/asm/vgtod.h +++ b/arch/x86/include/asm/vgtod.h @@ -23,8 +23,6 @@ struct vsyscall_gtod_data { struct timespec wall_to_monotonic; struct timespec wall_time_coarse; }; -extern struct vsyscall_gtod_data __vsyscall_gtod_data -__section_vsyscall_gtod_data; extern struct vsyscall_gtod_data vsyscall_gtod_data; #endif /* _ASM_X86_VGTOD_H */ diff --git a/arch/x86/include/asm/vsyscall.h b/arch/x86/include/asm/vsyscall.h index d0983d2..d555973 100644 --- a/arch/x86/include/asm/vsyscall.h +++ b/arch/x86/include/asm/vsyscall.h @@ -16,27 +16,19 @@ enum vsyscall_num { #ifdef __KERNEL__ #include <linux/seqlock.h> -#define __section_vgetcpu_mode __attribute__ ((unused, __section__ (".vgetcpu_mode"), aligned(16))) -#define __section_jiffies __attribute__ ((unused, __section__ (".jiffies"), aligned(16))) - /* Definitions for CONFIG_GENERIC_TIME definitions */ -#define __section_vsyscall_gtod_data __attribute__ \ - ((unused, __section__ (".vsyscall_gtod_data"),aligned(16))) -#define __section_vsyscall_clock __attribute__ \ - ((unused, __section__ (".vsyscall_clock"),aligned(16))) #define __vsyscall_fn \ __attribute__ ((unused, __section__(".vsyscall_fn"))) notrace #define VGETCPU_RDTSCP 1 #define VGETCPU_LSL 2 -extern int __vgetcpu_mode; -extern volatile unsigned long __jiffies; - /* kernel space (writeable) */ extern int vgetcpu_mode; extern struct timezone sys_tz; +#include <asm/vvar.h> + extern void map_vsyscall(void); #endif /* __KERNEL__ */ diff --git a/arch/x86/include/asm/vvar.h b/arch/x86/include/asm/vvar.h new file mode 100644 index 0000000..341b355 --- /dev/null +++ b/arch/x86/include/asm/vvar.h @@ -0,0 +1,52 @@ +/* + * vvar.h: Shared vDSO/kernel variable declarations + * Copyright (c) 2011 Andy Lutomirski + * Subject to the GNU General Public License, version 2 + * + * A handful of variables are accessible (read-only) from userspace + * code in the vsyscall page and the vdso. They are declared here. + * Some other file must define them with DEFINE_VVAR. + * + * In normal kernel code, they are used like any other variable. + * In user code, they are accessed through the VVAR macro. + * + * Each of these variables lives in the vsyscall page, and each + * one needs a unique offset within the little piece of the page + * reserved for vvars. Specify that offset in DECLARE_VVAR. + * (There are 896 bytes available. If you mess up, the linker will + * catch it.) + */ + +/* Offset of vars within vsyscall page */ +#define VSYSCALL_VARS_OFFSET (3072 + 128) + +#if defined(__VVAR_KERNEL_LDS) + +/* The kernel linker script defines its own magic to put vvars in the + * right place. + */ +#define DECLARE_VVAR(offset, type, name) \ + EMIT_VVAR(name, VSYSCALL_VARS_OFFSET + offset) + +#else + +#define DECLARE_VVAR(offset, type, name) \ + static type const * const vvaraddr_ ## name = \ + (void *)(VSYSCALL_START + VSYSCALL_VARS_OFFSET + (offset)); + +#define DEFINE_VVAR(type, name) \ + type __vvar_ ## name \ + __attribute__((section(".vsyscall_var_" #name), aligned(16))) + +#define VVAR(name) (*vvaraddr_ ## name) + +#endif + +/* DECLARE_VVAR(offset, type, name) */ + +DECLARE_VVAR(0, volatile unsigned long, jiffies) +DECLARE_VVAR(8, int, vgetcpu_mode) +DECLARE_VVAR(128, struct vsyscall_gtod_data, vsyscall_gtod_data) + +#undef DECLARE_VVAR +#undef VSYSCALL_VARS_OFFSET diff --git a/arch/x86/include/asm/xen/hypercall.h b/arch/x86/include/asm/xen/hypercall.h index 8508bfe..d240ea9 100644 --- a/arch/x86/include/asm/xen/hypercall.h +++ b/arch/x86/include/asm/xen/hypercall.h @@ -447,6 +447,13 @@ HYPERVISOR_hvm_op(int op, void *arg) return _hypercall2(unsigned long, hvm_op, op, arg); } +static inline int +HYPERVISOR_tmem_op( + struct tmem_op *op) +{ + return _hypercall1(int, tmem_op, op); +} + static inline void MULTI_fpu_taskswitch(struct multicall_entry *mcl, int set) { diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 2508064..f5abe3a 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -8,7 +8,6 @@ CPPFLAGS_vmlinux.lds += -U$(UTS_MACHINE) ifdef CONFIG_FUNCTION_TRACER # Do not profile debug and lowlevel utilities -CFLAGS_REMOVE_tsc.o = -pg CFLAGS_REMOVE_rtc.o = -pg CFLAGS_REMOVE_paravirt-spinlocks.o = -pg CFLAGS_REMOVE_pvclock.o = -pg @@ -24,13 +23,16 @@ endif nostackp := $(call cc-option, -fno-stack-protector) CFLAGS_vsyscall_64.o := $(PROFILING) -g0 $(nostackp) CFLAGS_hpet.o := $(nostackp) -CFLAGS_tsc.o := $(nostackp) +CFLAGS_vread_tsc_64.o := $(nostackp) CFLAGS_paravirt.o := $(nostackp) GCOV_PROFILE_vsyscall_64.o := n GCOV_PROFILE_hpet.o := n GCOV_PROFILE_tsc.o := n GCOV_PROFILE_paravirt.o := n +# vread_tsc_64 is hot and should be fully optimized: +CFLAGS_REMOVE_vread_tsc_64.o = -pg -fno-optimize-sibling-calls + obj-y := process_$(BITS).o signal.o entry_$(BITS).o obj-y += traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o obj-y += time.o ioport.o ldt.o dumpstack.o @@ -39,7 +41,7 @@ obj-$(CONFIG_IRQ_WORK) += irq_work.o obj-y += probe_roms.o obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o obj-$(CONFIG_X86_64) += sys_x86_64.o x8664_ksyms_64.o -obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o +obj-$(CONFIG_X86_64) += syscall_64.o vsyscall_64.o vread_tsc_64.o obj-y += bootflag.o e820.o obj-y += pci-dma.o quirks.o topology.o kdebugfs.o obj-y += alternative.o i8253.o pci-nommu.o hw_breakpoint.o diff --git a/arch/x86/kernel/time.c b/arch/x86/kernel/time.c index 25a28a2..00cbb27 100644 --- a/arch/x86/kernel/time.c +++ b/arch/x86/kernel/time.c @@ -23,7 +23,7 @@ #include <asm/time.h> #ifdef CONFIG_X86_64 -volatile unsigned long __jiffies __section_jiffies = INITIAL_JIFFIES; +DEFINE_VVAR(volatile unsigned long, jiffies) = INITIAL_JIFFIES; #endif unsigned long profile_pc(struct pt_regs *regs) diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index 9335bf7..6cc6922 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -763,25 +763,6 @@ static cycle_t read_tsc(struct clocksource *cs) ret : clocksource_tsc.cycle_last; } -#ifdef CONFIG_X86_64 -static cycle_t __vsyscall_fn vread_tsc(void) -{ - cycle_t ret; - - /* - * Surround the RDTSC by barriers, to make sure it's not - * speculated to outside the seqlock critical section and - * does not cause time warps: - */ - rdtsc_barrier(); - ret = (cycle_t)vget_cycles(); - rdtsc_barrier(); - - return ret >= __vsyscall_gtod_data.clock.cycle_last ? - ret : __vsyscall_gtod_data.clock.cycle_last; -} -#endif - static void resume_tsc(struct clocksource *cs) { clocksource_tsc.cycle_last = 0; diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S index 61682f0..89aed99 100644 --- a/arch/x86/kernel/vmlinux.lds.S +++ b/arch/x86/kernel/vmlinux.lds.S @@ -161,6 +161,12 @@ SECTIONS #define VVIRT_OFFSET (VSYSCALL_ADDR - __vsyscall_0) #define VVIRT(x) (ADDR(x) - VVIRT_OFFSET) +#define EMIT_VVAR(x, offset) .vsyscall_var_ ## x \ + ADDR(.vsyscall_0) + offset \ + : AT(VLOAD(.vsyscall_var_ ## x)) { \ + *(.vsyscall_var_ ## x) \ + } \ + x = VVIRT(.vsyscall_var_ ## x); . = ALIGN(4096); __vsyscall_0 = .; @@ -175,18 +181,6 @@ SECTIONS *(.vsyscall_fn) } - . = ALIGN(L1_CACHE_BYTES); - .vsyscall_gtod_data : AT(VLOAD(.vsyscall_gtod_data)) { - *(.vsyscall_gtod_data) - } - - vsyscall_gtod_data = VVIRT(.vsyscall_gtod_data); - .vsyscall_clock : AT(VLOAD(.vsyscall_clock)) { - *(.vsyscall_clock) - } - vsyscall_clock = VVIRT(.vsyscall_clock); - - .vsyscall_1 ADDR(.vsyscall_0) + 1024: AT(VLOAD(.vsyscall_1)) { *(.vsyscall_1) } @@ -194,21 +188,14 @@ SECTIONS *(.vsyscall_2) } - .vgetcpu_mode : AT(VLOAD(.vgetcpu_mode)) { - *(.vgetcpu_mode) - } - vgetcpu_mode = VVIRT(.vgetcpu_mode); - - . = ALIGN(L1_CACHE_BYTES); - .jiffies : AT(VLOAD(.jiffies)) { - *(.jiffies) - } - jiffies = VVIRT(.jiffies); - .vsyscall_3 ADDR(.vsyscall_0) + 3072: AT(VLOAD(.vsyscall_3)) { *(.vsyscall_3) } +#define __VVAR_KERNEL_LDS +#include <asm/vvar.h> +#undef __VVAR_KERNEL_LDS + . = __vsyscall_0 + PAGE_SIZE; #undef VSYSCALL_ADDR @@ -216,6 +203,7 @@ SECTIONS #undef VLOAD #undef VVIRT_OFFSET #undef VVIRT +#undef EMIT_VVAR #endif /* CONFIG_X86_64 */ diff --git a/arch/x86/kernel/vread_tsc_64.c b/arch/x86/kernel/vread_tsc_64.c new file mode 100644 index 0000000..a81aa9e --- /dev/null +++ b/arch/x86/kernel/vread_tsc_64.c @@ -0,0 +1,36 @@ +/* This code runs in userspace. */ + +#define DISABLE_BRANCH_PROFILING +#include <asm/vgtod.h> + +notrace cycle_t __vsyscall_fn vread_tsc(void) +{ + cycle_t ret; + u64 last; + + /* + * Empirically, a fence (of type that depends on the CPU) + * before rdtsc is enough to ensure that rdtsc is ordered + * with respect to loads. The various CPU manuals are unclear + * as to whether rdtsc can be reordered with later loads, + * but no one has ever seen it happen. + */ + rdtsc_barrier(); + ret = (cycle_t)vget_cycles(); + + last = VVAR(vsyscall_gtod_data).clock.cycle_last; + + if (likely(ret >= last)) + return ret; + + /* + * GCC likes to generate cmov here, but this branch is extremely + * predictable (it's just a funciton of time and the likely is + * very likely) and there's a data dependence, so force GCC + * to generate a branch instead. I don't barrier() because + * we don't actually need a barrier, and if this function + * ever gets inlined it will generate worse code. + */ + asm volatile (""); + return last; +} diff --git a/arch/x86/kernel/vsyscall_64.c b/arch/x86/kernel/vsyscall_64.c index dcbb28c..3e68218 100644 --- a/arch/x86/kernel/vsyscall_64.c +++ b/arch/x86/kernel/vsyscall_64.c @@ -49,17 +49,10 @@ __attribute__ ((unused, __section__(".vsyscall_" #nr))) notrace #define __syscall_clobber "r11","cx","memory" -/* - * vsyscall_gtod_data contains data that is : - * - readonly from vsyscalls - * - written by timer interrupt or systcl (/proc/sys/kernel/vsyscall64) - * Try to keep this structure as small as possible to avoid cache line ping pongs - */ -int __vgetcpu_mode __section_vgetcpu_mode; - -struct vsyscall_gtod_data __vsyscall_gtod_data __section_vsyscall_gtod_data = +DEFINE_VVAR(int, vgetcpu_mode); +DEFINE_VVAR(struct vsyscall_gtod_data, vsyscall_gtod_data) = { - .lock = SEQLOCK_UNLOCKED, + .lock = __SEQLOCK_UNLOCKED(__vsyscall_gtod_data.lock), .sysctl_enabled = 1, }; @@ -97,7 +90,7 @@ void update_vsyscall(struct timespec *wall_time, struct timespec *wtm, */ static __always_inline void do_get_tz(struct timezone * tz) { - *tz = __vsyscall_gtod_data.sys_tz; + *tz = VVAR(vsyscall_gtod_data).sys_tz; } static __always_inline int gettimeofday(struct timeval *tv, struct timezone *tz) @@ -126,23 +119,24 @@ static __always_inline void do_vgettimeofday(struct timeval * tv) unsigned long mult, shift, nsec; cycle_t (*vread)(void); do { - seq = read_seqbegin(&__vsyscall_gtod_data.lock); + seq = read_seqbegin(&VVAR(vsyscall_gtod_data).lock); - vread = __vsyscall_gtod_data.clock.vread; - if (unlikely(!__vsyscall_gtod_data.sysctl_enabled || !vread)) { + vread = VVAR(vsyscall_gtod_data).clock.vread; + if (unlikely(!VVAR(vsyscall_gtod_data).sysctl_enabled || + !vread)) { gettimeofday(tv,NULL); return; } now = vread(); - base = __vsyscall_gtod_data.clock.cycle_last; - mask = __vsyscall_gtod_data.clock.mask; - mult = __vsyscall_gtod_data.clock.mult; - shift = __vsyscall_gtod_data.clock.shift; + base = VVAR(vsyscall_gtod_data).clock.cycle_last; + mask = VVAR(vsyscall_gtod_data).clock.mask; + mult = VVAR(vsyscall_gtod_data).clock.mult; + shift = VVAR(vsyscall_gtod_data).clock.shift; - tv->tv_sec = __vsyscall_gtod_data.wall_time_sec; - nsec = __vsyscall_gtod_data.wall_time_nsec; - } while (read_seqretry(&__vsyscall_gtod_data.lock, seq)); + tv->tv_sec = VVAR(vsyscall_gtod_data).wall_time_sec; + nsec = VVAR(vsyscall_gtod_data).wall_time_nsec; + } while (read_seqretry(&VVAR(vsyscall_gtod_data).lock, seq)); /* calculate interval: */ cycle_delta = (now - base) & mask; @@ -171,15 +165,15 @@ time_t __vsyscall(1) vtime(time_t *t) { unsigned seq; time_t result; - if (unlikely(!__vsyscall_gtod_data.sysctl_enabled)) + if (unlikely(!VVAR(vsyscall_gtod_data).sysctl_enabled)) return time_syscall(t); do { - seq = read_seqbegin(&__vsyscall_gtod_data.lock); + seq = read_seqbegin(&VVAR(vsyscall_gtod_data).lock); - result = __vsyscall_gtod_data.wall_time_sec; + result = VVAR(vsyscall_gtod_data).wall_time_sec; - } while (read_seqretry(&__vsyscall_gtod_data.lock, seq)); + } while (read_seqretry(&VVAR(vsyscall_gtod_data).lock, seq)); if (t) *t = result; @@ -208,9 +202,9 @@ vgetcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *tcache) We do this here because otherwise user space would do it on its own in a likely inferior way (no access to jiffies). If you don't like it pass NULL. */ - if (tcache && tcache->blob[0] == (j = __jiffies)) { + if (tcache && tcache->blob[0] == (j = VVAR(jiffies))) { p = tcache->blob[1]; - } else if (__vgetcpu_mode == VGETCPU_RDTSCP) { + } else if (VVAR(vgetcpu_mode) == VGETCPU_RDTSCP) { /* Load per CPU data from RDTSCP */ native_read_tscp(&p); } else { diff --git a/arch/x86/vdso/Makefile b/arch/x86/vdso/Makefile index b6552b1..bef0bc9 100644 --- a/arch/x86/vdso/Makefile +++ b/arch/x86/vdso/Makefile @@ -11,7 +11,7 @@ vdso-install-$(VDSO32-y) += $(vdso32-images) # files to link into the vdso -vobjs-y := vdso-note.o vclock_gettime.o vgetcpu.o vvar.o +vobjs-y := vdso-note.o vclock_gettime.o vgetcpu.o # files to link into kernel obj-$(VDSO64-y) += vma.o vdso.o @@ -37,11 +37,24 @@ $(obj)/%.so: OBJCOPYFLAGS := -S $(obj)/%.so: $(obj)/%.so.dbg FORCE $(call if_changed,objcopy) +# +# Don't omit frame pointers for ease of userspace debugging, but do +# optimize sibling calls. +# CFL := $(PROFILING) -mcmodel=small -fPIC -O2 -fasynchronous-unwind-tables -m64 \ - $(filter -g%,$(KBUILD_CFLAGS)) $(call cc-option, -fno-stack-protector) + $(filter -g%,$(KBUILD_CFLAGS)) $(call cc-option, -fno-stack-protector) \ + -fno-omit-frame-pointer -foptimize-sibling-calls $(vobjs): KBUILD_CFLAGS += $(CFL) +# +# vDSO code runs in userspace and -pg doesn't help with profiling anyway. +# +CFLAGS_REMOVE_vdso-note.o = -pg +CFLAGS_REMOVE_vclock_gettime.o = -pg +CFLAGS_REMOVE_vgetcpu.o = -pg +CFLAGS_REMOVE_vvar.o = -pg + targets += vdso-syms.lds obj-$(VDSO64-y) += vdso-syms.lds diff --git a/arch/x86/vdso/vclock_gettime.c b/arch/x86/vdso/vclock_gettime.c index ee55754..a724905 100644 --- a/arch/x86/vdso/vclock_gettime.c +++ b/arch/x86/vdso/vclock_gettime.c @@ -2,7 +2,7 @@ * Copyright 2006 Andi Kleen, SUSE Labs. * Subject to the GNU Public License, v.2 * - * Fast user context implementation of clock_gettime and gettimeofday. + * Fast user context implementation of clock_gettime, gettimeofday, and time. * * The code should have no internal unresolved relocations. * Check with readelf after changing. @@ -22,9 +22,8 @@ #include <asm/hpet.h> #include <asm/unistd.h> #include <asm/io.h> -#include "vextern.h" -#define gtod vdso_vsyscall_gtod_data +#define gtod (&VVAR(vsyscall_gtod_data)) notrace static long vdso_fallback_gettime(long clock, struct timespec *ts) { @@ -56,22 +55,6 @@ notrace static noinline int do_realtime(struct timespec *ts) return 0; } -/* Copy of the version in kernel/time.c which we cannot directly access */ -notrace static void -vset_normalized_timespec(struct timespec *ts, long sec, long nsec) -{ - while (nsec >= NSEC_PER_SEC) { - nsec -= NSEC_PER_SEC; - ++sec; - } - while (nsec < 0) { - nsec += NSEC_PER_SEC; - --sec; - } - ts->tv_sec = sec; - ts->tv_nsec = nsec; -} - notrace static noinline int do_monotonic(struct timespec *ts) { unsigned long seq, ns, secs; @@ -82,7 +65,17 @@ notrace static noinline int do_monotonic(struct timespec *ts) secs += gtod->wall_to_monotonic.tv_sec; ns += gtod->wall_to_monotonic.tv_nsec; } while (unlikely(read_seqretry(>od->lock, seq))); - vset_normalized_timespec(ts, secs, ns); + + /* wall_time_nsec, vgetns(), and wall_to_monotonic.tv_nsec + * are all guaranteed to be nonnegative. + */ + while (ns >= NSEC_PER_SEC) { + ns -= NSEC_PER_SEC; + ++secs; + } + ts->tv_sec = secs; + ts->tv_nsec = ns; + return 0; } @@ -107,7 +100,17 @@ notrace static noinline int do_monotonic_coarse(struct timespec *ts) secs += gtod->wall_to_monotonic.tv_sec; ns += gtod->wall_to_monotonic.tv_nsec; } while (unlikely(read_seqretry(>od->lock, seq))); - vset_normalized_timespec(ts, secs, ns); + + /* wall_time_nsec and wall_to_monotonic.tv_nsec are + * guaranteed to be between 0 and NSEC_PER_SEC. + */ + if (ns >= NSEC_PER_SEC) { + ns -= NSEC_PER_SEC; + ++secs; + } + ts->tv_sec = secs; + ts->tv_nsec = ns; + return 0; } @@ -157,3 +160,32 @@ notrace int __vdso_gettimeofday(struct timeval *tv, struct timezone *tz) } int gettimeofday(struct timeval *, struct timezone *) __attribute__((weak, alias("__vdso_gettimeofday"))); + +/* This will break when the xtime seconds get inaccurate, but that is + * unlikely */ + +static __always_inline long time_syscall(long *t) +{ + long secs; + asm volatile("syscall" + : "=a" (secs) + : "0" (__NR_time), "D" (t) : "cc", "r11", "cx", "memory"); + return secs; +} + +notrace time_t __vdso_time(time_t *t) +{ + time_t result; + + if (unlikely(!VVAR(vsyscall_gtod_data).sysctl_enabled)) + return time_syscall(t); + + /* This is atomic on x86_64 so we don't need any locks. */ + result = ACCESS_ONCE(VVAR(vsyscall_gtod_data).wall_time_sec); + + if (t) + *t = result; + return result; +} +int time(time_t *t) + __attribute__((weak, alias("__vdso_time"))); diff --git a/arch/x86/vdso/vdso.lds.S b/arch/x86/vdso/vdso.lds.S index 4e5dd3b..b96b267 100644 --- a/arch/x86/vdso/vdso.lds.S +++ b/arch/x86/vdso/vdso.lds.S @@ -23,15 +23,10 @@ VERSION { __vdso_gettimeofday; getcpu; __vdso_getcpu; + time; + __vdso_time; local: *; }; } VDSO64_PRELINK = VDSO_PRELINK; - -/* - * Define VDSO64_x for each VEXTERN(x), for use via VDSO64_SYMBOL. - */ -#define VEXTERN(x) VDSO64_ ## x = vdso_ ## x; -#include "vextern.h" -#undef VEXTERN diff --git a/arch/x86/vdso/vextern.h b/arch/x86/vdso/vextern.h deleted file mode 100644 index 1683ba2..0000000 --- a/arch/x86/vdso/vextern.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef VEXTERN -#include <asm/vsyscall.h> -#define VEXTERN(x) \ - extern typeof(x) *vdso_ ## x __attribute__((visibility("hidden"))); -#endif - -#define VMAGIC 0xfeedbabeabcdefabUL - -/* Any kernel variables used in the vDSO must be exported in the main - kernel's vmlinux.lds.S/vsyscall.h/proper __section and - put into vextern.h and be referenced as a pointer with vdso prefix. - The main kernel later fills in the values. */ - -VEXTERN(jiffies) -VEXTERN(vgetcpu_mode) -VEXTERN(vsyscall_gtod_data) diff --git a/arch/x86/vdso/vgetcpu.c b/arch/x86/vdso/vgetcpu.c index 9fbc6b2..5463ad5 100644 --- a/arch/x86/vdso/vgetcpu.c +++ b/arch/x86/vdso/vgetcpu.c @@ -11,14 +11,13 @@ #include <linux/time.h> #include <asm/vsyscall.h> #include <asm/vgtod.h> -#include "vextern.h" notrace long __vdso_getcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *unused) { unsigned int p; - if (*vdso_vgetcpu_mode == VGETCPU_RDTSCP) { + if (VVAR(vgetcpu_mode) == VGETCPU_RDTSCP) { /* Load per CPU data from RDTSCP */ native_read_tscp(&p); } else { diff --git a/arch/x86/vdso/vma.c b/arch/x86/vdso/vma.c index 4b5d26f..7abd2be 100644 --- a/arch/x86/vdso/vma.c +++ b/arch/x86/vdso/vma.c @@ -15,9 +15,6 @@ #include <asm/proto.h> #include <asm/vdso.h> -#include "vextern.h" /* Just for VMAGIC. */ -#undef VEXTERN - unsigned int __read_mostly vdso_enabled = 1; extern char vdso_start[], vdso_end[]; @@ -26,20 +23,10 @@ extern unsigned short vdso_sync_cpuid; static struct page **vdso_pages; static unsigned vdso_size; -static inline void *var_ref(void *p, char *name) -{ - if (*(void **)p != (void *)VMAGIC) { - printk("VDSO: variable %s broken\n", name); - vdso_enabled = 0; - } - return p; -} - static int __init init_vdso_vars(void) { int npages = (vdso_end - vdso_start + PAGE_SIZE - 1) / PAGE_SIZE; int i; - char *vbase; vdso_size = npages << PAGE_SHIFT; vdso_pages = kmalloc(sizeof(struct page *) * npages, GFP_KERNEL); @@ -54,20 +41,6 @@ static int __init init_vdso_vars(void) copy_page(page_address(p), vdso_start + i*PAGE_SIZE); } - vbase = vmap(vdso_pages, npages, 0, PAGE_KERNEL); - if (!vbase) - goto oom; - - if (memcmp(vbase, "\177ELF", 4)) { - printk("VDSO: I'm broken; not ELF\n"); - vdso_enabled = 0; - } - -#define VEXTERN(x) \ - *(typeof(__ ## x) **) var_ref(VDSO64_SYMBOL(vbase, x), #x) = &__ ## x; -#include "vextern.h" -#undef VEXTERN - vunmap(vbase); return 0; oom: diff --git a/arch/x86/vdso/vvar.c b/arch/x86/vdso/vvar.c deleted file mode 100644 index 1b7e703..0000000 --- a/arch/x86/vdso/vvar.c +++ /dev/null @@ -1,12 +0,0 @@ -/* Define pointer to external vDSO variables. - These are part of the vDSO. The kernel fills in the real addresses - at boot time. This is done because when the vdso is linked the - kernel isn't yet and we don't know the final addresses. */ -#include <linux/kernel.h> -#include <linux/time.h> -#include <asm/vsyscall.h> -#include <asm/timex.h> -#include <asm/vgtod.h> - -#define VEXTERN(x) typeof (__ ## x) *const vdso_ ## x = (void *)VMAGIC; -#include "vextern.h" diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 02d7524..dc708dc 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -75,67 +75,12 @@ #include "mmu.h" #include "debugfs.h" -#define MMU_UPDATE_HISTO 30 - /* * Protects atomic reservation decrease/increase against concurrent increases. * Also protects non-atomic updates of current_pages and balloon lists. */ DEFINE_SPINLOCK(xen_reservation_lock); -#ifdef CONFIG_XEN_DEBUG_FS - -static struct { - u32 pgd_update; - u32 pgd_update_pinned; - u32 pgd_update_batched; - - u32 pud_update; - u32 pud_update_pinned; - u32 pud_update_batched; - - u32 pmd_update; - u32 pmd_update_pinned; - u32 pmd_update_batched; - - u32 pte_update; - u32 pte_update_pinned; - u32 pte_update_batched; - - u32 mmu_update; - u32 mmu_update_extended; - u32 mmu_update_histo[MMU_UPDATE_HISTO]; - - u32 prot_commit; - u32 prot_commit_batched; - - u32 set_pte_at; - u32 set_pte_at_batched; - u32 set_pte_at_pinned; - u32 set_pte_at_current; - u32 set_pte_at_kernel; -} mmu_stats; - -static u8 zero_stats; - -static inline void check_zero(void) -{ - if (unlikely(zero_stats)) { - memset(&mmu_stats, 0, sizeof(mmu_stats)); - zero_stats = 0; - } -} - -#define ADD_STATS(elem, val) \ - do { check_zero(); mmu_stats.elem += (val); } while(0) - -#else /* !CONFIG_XEN_DEBUG_FS */ - -#define ADD_STATS(elem, val) do { (void)(val); } while(0) - -#endif /* CONFIG_XEN_DEBUG_FS */ - - /* * Identity map, in addition to plain kernel map. This needs to be * large enough to allocate page table pages to allocate the rest. @@ -243,11 +188,6 @@ static bool xen_page_pinned(void *ptr) return PagePinned(page); } -static bool xen_iomap_pte(pte_t pte) -{ - return pte_flags(pte) & _PAGE_IOMAP; -} - void xen_set_domain_pte(pte_t *ptep, pte_t pteval, unsigned domid) { struct multicall_space mcs; @@ -257,7 +197,7 @@ void xen_set_domain_pte(pte_t *ptep, pte_t pteval, unsigned domid) u = mcs.args; /* ptep might be kmapped when using 32-bit HIGHPTE */ - u->ptr = arbitrary_virt_to_machine(ptep).maddr; + u->ptr = virt_to_machine(ptep).maddr; u->val = pte_val_ma(pteval); MULTI_mmu_update(mcs.mc, mcs.args, 1, NULL, domid); @@ -266,11 +206,6 @@ void xen_set_domain_pte(pte_t *ptep, pte_t pteval, unsigned domid) } EXPORT_SYMBOL_GPL(xen_set_domain_pte); -static void xen_set_iomap_pte(pte_t *ptep, pte_t pteval) -{ - xen_set_domain_pte(ptep, pteval, DOMID_IO); -} - static void xen_extend_mmu_update(const struct mmu_update *update) { struct multicall_space mcs; @@ -279,27 +214,17 @@ static void xen_extend_mmu_update(const struct mmu_update *update) mcs = xen_mc_extend_args(__HYPERVISOR_mmu_update, sizeof(*u)); if (mcs.mc != NULL) { - ADD_STATS(mmu_update_extended, 1); - ADD_STATS(mmu_update_histo[mcs.mc->args[1]], -1); - mcs.mc->args[1]++; - - if (mcs.mc->args[1] < MMU_UPDATE_HISTO) - ADD_STATS(mmu_update_histo[mcs.mc->args[1]], 1); - else - ADD_STATS(mmu_update_histo[0], 1); } else { - ADD_STATS(mmu_update, 1); mcs = __xen_mc_entry(sizeof(*u)); MULTI_mmu_update(mcs.mc, mcs.args, 1, NULL, DOMID_SELF); - ADD_STATS(mmu_update_histo[1], 1); } u = mcs.args; *u = *update; } -void xen_set_pmd_hyper(pmd_t *ptr, pmd_t val) +static void xen_set_pmd_hyper(pmd_t *ptr, pmd_t val) { struct mmu_update u; @@ -312,17 +237,13 @@ void xen_set_pmd_hyper(pmd_t *ptr, pmd_t val) u.val = pmd_val_ma(val); xen_extend_mmu_update(&u); - ADD_STATS(pmd_update_batched, paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU); - xen_mc_issue(PARAVIRT_LAZY_MMU); preempt_enable(); } -void xen_set_pmd(pmd_t *ptr, pmd_t val) +static void xen_set_pmd(pmd_t *ptr, pmd_t val) { - ADD_STATS(pmd_update, 1); - /* If page is not pinned, we can just update the entry directly */ if (!xen_page_pinned(ptr)) { @@ -330,8 +251,6 @@ void xen_set_pmd(pmd_t *ptr, pmd_t val) return; } - ADD_STATS(pmd_update_pinned, 1); - xen_set_pmd_hyper(ptr, val); } @@ -344,35 +263,34 @@ void set_pte_mfn(unsigned long vaddr, unsigned long mfn, pgprot_t flags) set_pte_vaddr(vaddr, mfn_pte(mfn, flags)); } -void xen_set_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pteval) +static bool xen_batched_set_pte(pte_t *ptep, pte_t pteval) { - if (xen_iomap_pte(pteval)) { - xen_set_iomap_pte(ptep, pteval); - goto out; - } + struct mmu_update u; - ADD_STATS(set_pte_at, 1); -// ADD_STATS(set_pte_at_pinned, xen_page_pinned(ptep)); - ADD_STATS(set_pte_at_current, mm == current->mm); - ADD_STATS(set_pte_at_kernel, mm == &init_mm); + if (paravirt_get_lazy_mode() != PARAVIRT_LAZY_MMU) + return false; - if (mm == current->mm || mm == &init_mm) { - if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU) { - struct multicall_space mcs; - mcs = xen_mc_entry(0); + xen_mc_batch(); - MULTI_update_va_mapping(mcs.mc, addr, pteval, 0); - ADD_STATS(set_pte_at_batched, 1); - xen_mc_issue(PARAVIRT_LAZY_MMU); - goto out; - } else - if (HYPERVISOR_update_va_mapping(addr, pteval, 0) == 0) - goto out; - } - xen_set_pte(ptep, pteval); + u.ptr = virt_to_machine(ptep).maddr | MMU_NORMAL_PT_UPDATE; + u.val = pte_val_ma(pteval); + xen_extend_mmu_update(&u); + + xen_mc_issue(PARAVIRT_LAZY_MMU); -out: return; + return true; +} + +static void xen_set_pte(pte_t *ptep, pte_t pteval) +{ + if (!xen_batched_set_pte(ptep, pteval)) + native_set_pte(ptep, pteval); +} + +static void xen_set_pte_at(struct mm_struct *mm, unsigned long addr, + pte_t *ptep, pte_t pteval) +{ + xen_set_pte(ptep, pteval); } pte_t xen_ptep_modify_prot_start(struct mm_struct *mm, @@ -389,13 +307,10 @@ void xen_ptep_modify_prot_commit(struct mm_struct *mm, unsigned long addr, xen_mc_batch(); - u.ptr = arbitrary_virt_to_machine(ptep).maddr | MMU_PT_UPDATE_PRESERVE_AD; + u.ptr = virt_to_machine(ptep).maddr | MMU_PT_UPDATE_PRESERVE_AD; u.val = pte_val_ma(pte); xen_extend_mmu_update(&u); - ADD_STATS(prot_commit, 1); - ADD_STATS(prot_commit_batched, paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU); - xen_mc_issue(PARAVIRT_LAZY_MMU); } @@ -463,7 +378,7 @@ static pteval_t iomap_pte(pteval_t val) return val; } -pteval_t xen_pte_val(pte_t pte) +static pteval_t xen_pte_val(pte_t pte) { pteval_t pteval = pte.pte; @@ -480,7 +395,7 @@ pteval_t xen_pte_val(pte_t pte) } PV_CALLEE_SAVE_REGS_THUNK(xen_pte_val); -pgdval_t xen_pgd_val(pgd_t pgd) +static pgdval_t xen_pgd_val(pgd_t pgd) { return pte_mfn_to_pfn(pgd.pgd); } @@ -511,7 +426,7 @@ void xen_set_pat(u64 pat) WARN_ON(pat != 0x0007010600070106ull); } -pte_t xen_make_pte(pteval_t pte) +static pte_t xen_make_pte(pteval_t pte) { phys_addr_t addr = (pte & PTE_PFN_MASK); @@ -581,20 +496,20 @@ pte_t xen_make_pte_debug(pteval_t pte) PV_CALLEE_SAVE_REGS_THUNK(xen_make_pte_debug); #endif -pgd_t xen_make_pgd(pgdval_t pgd) +static pgd_t xen_make_pgd(pgdval_t pgd) { pgd = pte_pfn_to_mfn(pgd); return native_make_pgd(pgd); } PV_CALLEE_SAVE_REGS_THUNK(xen_make_pgd); -pmdval_t xen_pmd_val(pmd_t pmd) +static pmdval_t xen_pmd_val(pmd_t pmd) { return pte_mfn_to_pfn(pmd.pmd); } PV_CALLEE_SAVE_REGS_THUNK(xen_pmd_val); -void xen_set_pud_hyper(pud_t *ptr, pud_t val) +static void xen_set_pud_hyper(pud_t *ptr, pud_t val) { struct mmu_update u; @@ -607,17 +522,13 @@ void xen_set_pud_hyper(pud_t *ptr, pud_t val) u.val = pud_val_ma(val); xen_extend_mmu_update(&u); - ADD_STATS(pud_update_batched, paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU); - xen_mc_issue(PARAVIRT_LAZY_MMU); preempt_enable(); } -void xen_set_pud(pud_t *ptr, pud_t val) +static void xen_set_pud(pud_t *ptr, pud_t val) { - ADD_STATS(pud_update, 1); - /* If page is not pinned, we can just update the entry directly */ if (!xen_page_pinned(ptr)) { @@ -625,56 +536,28 @@ void xen_set_pud(pud_t *ptr, pud_t val) return; } - ADD_STATS(pud_update_pinned, 1); - xen_set_pud_hyper(ptr, val); } -void xen_set_pte(pte_t *ptep, pte_t pte) -{ - if (xen_iomap_pte(pte)) { - xen_set_iomap_pte(ptep, pte); - return; - } - - ADD_STATS(pte_update, 1); -// ADD_STATS(pte_update_pinned, xen_page_pinned(ptep)); - ADD_STATS(pte_update_batched, paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU); - #ifdef CONFIG_X86_PAE - ptep->pte_high = pte.pte_high; - smp_wmb(); - ptep->pte_low = pte.pte_low; -#else - *ptep = pte; -#endif -} - -#ifdef CONFIG_X86_PAE -void xen_set_pte_atomic(pte_t *ptep, pte_t pte) +static void xen_set_pte_atomic(pte_t *ptep, pte_t pte) { - if (xen_iomap_pte(pte)) { - xen_set_iomap_pte(ptep, pte); - return; - } - set_64bit((u64 *)ptep, native_pte_val(pte)); } -void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) +static void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { - ptep->pte_low = 0; - smp_wmb(); /* make sure low gets written first */ - ptep->pte_high = 0; + if (!xen_batched_set_pte(ptep, native_make_pte(0))) + native_pte_clear(mm, addr, ptep); } -void xen_pmd_clear(pmd_t *pmdp) +static void xen_pmd_clear(pmd_t *pmdp) { set_pmd(pmdp, __pmd(0)); } #endif /* CONFIG_X86_PAE */ -pmd_t xen_make_pmd(pmdval_t pmd) +static pmd_t xen_make_pmd(pmdval_t pmd) { pmd = pte_pfn_to_mfn(pmd); return native_make_pmd(pmd); @@ -682,13 +565,13 @@ pmd_t xen_make_pmd(pmdval_t pmd) PV_CALLEE_SAVE_REGS_THUNK(xen_make_pmd); #if PAGETABLE_LEVELS == 4 -pudval_t xen_pud_val(pud_t pud) +static pudval_t xen_pud_val(pud_t pud) { return pte_mfn_to_pfn(pud.pud); } PV_CALLEE_SAVE_REGS_THUNK(xen_pud_val); -pud_t xen_make_pud(pudval_t pud) +static pud_t xen_make_pud(pudval_t pud) { pud = pte_pfn_to_mfn(pud); @@ -696,7 +579,7 @@ pud_t xen_make_pud(pudval_t pud) } PV_CALLEE_SAVE_REGS_THUNK(xen_make_pud); -pgd_t *xen_get_user_pgd(pgd_t *pgd) +static pgd_t *xen_get_user_pgd(pgd_t *pgd) { pgd_t *pgd_page = (pgd_t *)(((unsigned long)pgd) & PAGE_MASK); unsigned offset = pgd - pgd_page; @@ -728,7 +611,7 @@ static void __xen_set_pgd_hyper(pgd_t *ptr, pgd_t val) * 2. It is always pinned * 3. It has no user pagetable attached to it */ -void __init xen_set_pgd_hyper(pgd_t *ptr, pgd_t val) +static void __init xen_set_pgd_hyper(pgd_t *ptr, pgd_t val) { preempt_disable(); @@ -741,12 +624,10 @@ void __init xen_set_pgd_hyper(pgd_t *ptr, pgd_t val) preempt_enable(); } -void xen_set_pgd(pgd_t *ptr, pgd_t val) +static void xen_set_pgd(pgd_t *ptr, pgd_t val) { pgd_t *user_ptr = xen_get_user_pgd(ptr); - ADD_STATS(pgd_update, 1); - /* If page is not pinned, we can just update the entry directly */ if (!xen_page_pinned(ptr)) { @@ -758,9 +639,6 @@ void xen_set_pgd(pgd_t *ptr, pgd_t val) return; } - ADD_STATS(pgd_update_pinned, 1); - ADD_STATS(pgd_update_batched, paravirt_get_lazy_mode() == PARAVIRT_LAZY_MMU); - /* If it's pinned, then we can at least batch the kernel and user updates together. */ xen_mc_batch(); @@ -1162,14 +1040,14 @@ void xen_mm_unpin_all(void) spin_unlock(&pgd_lock); } -void xen_activate_mm(struct mm_struct *prev, struct mm_struct *next) +static void xen_activate_mm(struct mm_struct *prev, struct mm_struct *next) { spin_lock(&next->page_table_lock); xen_pgd_pin(next); spin_unlock(&next->page_table_lock); } -void xen_dup_mmap(struct mm_struct *oldmm, struct mm_struct *mm) +static void xen_dup_mmap(struct mm_struct *oldmm, struct mm_struct *mm) { spin_lock(&mm->page_table_lock); xen_pgd_pin(mm); @@ -1256,7 +1134,7 @@ static void xen_drop_mm_ref(struct mm_struct *mm) * pagetable because of lazy tlb flushing. This means we need need to * switch all CPUs off this pagetable before we can unpin it. */ -void xen_exit_mmap(struct mm_struct *mm) +static void xen_exit_mmap(struct mm_struct *mm) { get_cpu(); /* make sure we don't move around */ xen_drop_mm_ref(mm); @@ -2371,7 +2249,7 @@ static int remap_area_mfn_pte_fn(pte_t *ptep, pgtable_t token, struct remap_data *rmd = data; pte_t pte = pte_mkspecial(pfn_pte(rmd->mfn++, rmd->prot)); - rmd->mmu_update->ptr = arbitrary_virt_to_machine(ptep).maddr; + rmd->mmu_update->ptr = virt_to_machine(ptep).maddr; rmd->mmu_update->val = pte_val_ma(pte); rmd->mmu_update++; @@ -2425,7 +2303,6 @@ out: EXPORT_SYMBOL_GPL(xen_remap_domain_mfn_range); #ifdef CONFIG_XEN_DEBUG_FS - static int p2m_dump_open(struct inode *inode, struct file *filp) { return single_open(filp, p2m_dump_show, NULL); @@ -2437,65 +2314,4 @@ static const struct file_operations p2m_dump_fops = { .llseek = seq_lseek, .release = single_release, }; - -static struct dentry *d_mmu_debug; - -static int __init xen_mmu_debugfs(void) -{ - struct dentry *d_xen = xen_init_debugfs(); - - if (d_xen == NULL) - return -ENOMEM; - - d_mmu_debug = debugfs_create_dir("mmu", d_xen); - - debugfs_create_u8("zero_stats", 0644, d_mmu_debug, &zero_stats); - - debugfs_create_u32("pgd_update", 0444, d_mmu_debug, &mmu_stats.pgd_update); - debugfs_create_u32("pgd_update_pinned", 0444, d_mmu_debug, - &mmu_stats.pgd_update_pinned); - debugfs_create_u32("pgd_update_batched", 0444, d_mmu_debug, - &mmu_stats.pgd_update_pinned); - - debugfs_create_u32("pud_update", 0444, d_mmu_debug, &mmu_stats.pud_update); - debugfs_create_u32("pud_update_pinned", 0444, d_mmu_debug, - &mmu_stats.pud_update_pinned); - debugfs_create_u32("pud_update_batched", 0444, d_mmu_debug, - &mmu_stats.pud_update_pinned); - - debugfs_create_u32("pmd_update", 0444, d_mmu_debug, &mmu_stats.pmd_update); - debugfs_create_u32("pmd_update_pinned", 0444, d_mmu_debug, - &mmu_stats.pmd_update_pinned); - debugfs_create_u32("pmd_update_batched", 0444, d_mmu_debug, - &mmu_stats.pmd_update_pinned); - - debugfs_create_u32("pte_update", 0444, d_mmu_debug, &mmu_stats.pte_update); -// debugfs_create_u32("pte_update_pinned", 0444, d_mmu_debug, -// &mmu_stats.pte_update_pinned); - debugfs_create_u32("pte_update_batched", 0444, d_mmu_debug, - &mmu_stats.pte_update_pinned); - - debugfs_create_u32("mmu_update", 0444, d_mmu_debug, &mmu_stats.mmu_update); - debugfs_create_u32("mmu_update_extended", 0444, d_mmu_debug, - &mmu_stats.mmu_update_extended); - xen_debugfs_create_u32_array("mmu_update_histo", 0444, d_mmu_debug, - mmu_stats.mmu_update_histo, 20); - - debugfs_create_u32("set_pte_at", 0444, d_mmu_debug, &mmu_stats.set_pte_at); - debugfs_create_u32("set_pte_at_batched", 0444, d_mmu_debug, - &mmu_stats.set_pte_at_batched); - debugfs_create_u32("set_pte_at_current", 0444, d_mmu_debug, - &mmu_stats.set_pte_at_current); - debugfs_create_u32("set_pte_at_kernel", 0444, d_mmu_debug, - &mmu_stats.set_pte_at_kernel); - - debugfs_create_u32("prot_commit", 0444, d_mmu_debug, &mmu_stats.prot_commit); - debugfs_create_u32("prot_commit_batched", 0444, d_mmu_debug, - &mmu_stats.prot_commit_batched); - - debugfs_create_file("p2m", 0600, d_mmu_debug, NULL, &p2m_dump_fops); - return 0; -} -fs_initcall(xen_mmu_debugfs); - -#endif /* CONFIG_XEN_DEBUG_FS */ +#endif /* CONFIG_XEN_DEBUG_FS */ diff --git a/arch/x86/xen/mmu.h b/arch/x86/xen/mmu.h index 537bb9a..73809bb 100644 --- a/arch/x86/xen/mmu.h +++ b/arch/x86/xen/mmu.h @@ -15,43 +15,6 @@ bool __set_phys_to_machine(unsigned long pfn, unsigned long mfn); void set_pte_mfn(unsigned long vaddr, unsigned long pfn, pgprot_t flags); - -void xen_activate_mm(struct mm_struct *prev, struct mm_struct *next); -void xen_dup_mmap(struct mm_struct *oldmm, struct mm_struct *mm); -void xen_exit_mmap(struct mm_struct *mm); - -pteval_t xen_pte_val(pte_t); -pmdval_t xen_pmd_val(pmd_t); -pgdval_t xen_pgd_val(pgd_t); - -pte_t xen_make_pte(pteval_t); -pmd_t xen_make_pmd(pmdval_t); -pgd_t xen_make_pgd(pgdval_t); - -void xen_set_pte(pte_t *ptep, pte_t pteval); -void xen_set_pte_at(struct mm_struct *mm, unsigned long addr, - pte_t *ptep, pte_t pteval); - -#ifdef CONFIG_X86_PAE -void xen_set_pte_atomic(pte_t *ptep, pte_t pte); -void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep); -void xen_pmd_clear(pmd_t *pmdp); -#endif /* CONFIG_X86_PAE */ - -void xen_set_pmd(pmd_t *pmdp, pmd_t pmdval); -void xen_set_pud(pud_t *ptr, pud_t val); -void xen_set_pmd_hyper(pmd_t *pmdp, pmd_t pmdval); -void xen_set_pud_hyper(pud_t *ptr, pud_t val); - -#if PAGETABLE_LEVELS == 4 -pudval_t xen_pud_val(pud_t pud); -pud_t xen_make_pud(pudval_t pudval); -void xen_set_pgd(pgd_t *pgdp, pgd_t pgd); -void xen_set_pgd_hyper(pgd_t *pgdp, pgd_t pgd); -#endif - -pgd_t *xen_get_user_pgd(pgd_t *pgd); - pte_t xen_ptep_modify_prot_start(struct mm_struct *mm, unsigned long addr, pte_t *ptep); void xen_ptep_modify_prot_commit(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pte); diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index 7c275f5..5d43c1f 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -20,12 +20,6 @@ config XTENSA config RWSEM_XCHGADD_ALGORITHM def_bool y -config GENERIC_FIND_NEXT_BIT - def_bool y - -config GENERIC_FIND_BIT_LE - def_bool y - config GENERIC_HWEIGHT def_bool y |