diff options
Diffstat (limited to 'arch')
-rw-r--r-- | arch/arc/Kconfig | 21 | ||||
-rw-r--r-- | arch/arc/configs/vdk_hs38_smp_defconfig | 2 | ||||
-rw-r--r-- | arch/arc/include/asm/arcregs.h | 3 | ||||
-rw-r--r-- | arch/arc/include/asm/irqflags-arcv2.h | 7 | ||||
-rw-r--r-- | arch/arc/include/asm/mcip.h | 4 | ||||
-rw-r--r-- | arch/arc/include/asm/pgtable.h | 45 | ||||
-rw-r--r-- | arch/arc/kernel/entry-arcv2.S | 19 | ||||
-rw-r--r-- | arch/arc/kernel/intc-arcv2.c | 41 | ||||
-rw-r--r-- | arch/arc/kernel/mcip.c | 10 | ||||
-rw-r--r-- | arch/arc/kernel/setup.c | 20 | ||||
-rw-r--r-- | arch/arc/kernel/time.c | 8 |
11 files changed, 119 insertions, 61 deletions
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig index 76dde9d..0655495 100644 --- a/arch/arc/Kconfig +++ b/arch/arc/Kconfig @@ -338,6 +338,19 @@ config ARC_PAGE_SIZE_4K endchoice +choice + prompt "MMU Super Page Size" + depends on ISA_ARCV2 && TRANSPARENT_HUGEPAGE + default ARC_HUGEPAGE_2M + +config ARC_HUGEPAGE_2M + bool "2MB" + +config ARC_HUGEPAGE_16M + bool "16MB" + +endchoice + if ISA_ARCOMPACT config ARC_COMPACT_IRQ_LEVELS @@ -410,7 +423,7 @@ config ARC_HAS_RTC default n depends on !SMP -config ARC_HAS_GRTC +config ARC_HAS_GFRC bool "SMP synchronized 64-bit cycle counter" default y depends on SMP @@ -566,6 +579,12 @@ endmenu endmenu # "ARC Architecture Configuration" source "mm/Kconfig" + +config FORCE_MAX_ZONEORDER + int "Maximum zone order" + default "12" if ARC_HUGEPAGE_16M + default "11" + source "net/Kconfig" source "drivers/Kconfig" source "fs/Kconfig" diff --git a/arch/arc/configs/vdk_hs38_smp_defconfig b/arch/arc/configs/vdk_hs38_smp_defconfig index f36c047..7359859 100644 --- a/arch/arc/configs/vdk_hs38_smp_defconfig +++ b/arch/arc/configs/vdk_hs38_smp_defconfig @@ -16,7 +16,7 @@ CONFIG_ARC_PLAT_AXS10X=y CONFIG_AXS103=y CONFIG_ISA_ARCV2=y CONFIG_SMP=y -# CONFIG_ARC_HAS_GRTC is not set +# CONFIG_ARC_HAS_GFRC is not set CONFIG_ARC_UBOOT_SUPPORT=y CONFIG_ARC_BUILTIN_DTB_NAME="vdk_hs38_smp" CONFIG_PREEMPT=y diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h index 7fac7d8..fdc5be5 100644 --- a/arch/arc/include/asm/arcregs.h +++ b/arch/arc/include/asm/arcregs.h @@ -349,14 +349,13 @@ struct cpuinfo_arc { struct cpuinfo_arc_bpu bpu; struct bcr_identity core; struct bcr_isa isa; - struct bcr_timer timers; unsigned int vec_base; struct cpuinfo_arc_ccm iccm, dccm; struct { unsigned int swap:1, norm:1, minmax:1, barrel:1, crc:1, pad1:3, fpu_sp:1, fpu_dp:1, pad2:6, debug:1, ap:1, smart:1, rtt:1, pad3:4, - pad4:8; + timer0:1, timer1:1, rtc:1, gfrc:1, pad4:4; } extn; struct bcr_mpy extn_mpy; struct bcr_extn_xymem extn_xymem; diff --git a/arch/arc/include/asm/irqflags-arcv2.h b/arch/arc/include/asm/irqflags-arcv2.h index 258b0e5..1fc18ee 100644 --- a/arch/arc/include/asm/irqflags-arcv2.h +++ b/arch/arc/include/asm/irqflags-arcv2.h @@ -30,8 +30,11 @@ /* Was Intr taken in User Mode */ #define AUX_IRQ_ACT_BIT_U 31 -/* 0 is highest level, but taken by FIRQs, if present in design */ -#define ARCV2_IRQ_DEF_PRIO 0 +/* + * User space should be interruptable even by lowest prio interrupt + * Safe even if actual interrupt priorities is fewer or even one + */ +#define ARCV2_IRQ_DEF_PRIO 15 /* seed value for status register */ #define ISA_INIT_STATUS_BITS (STATUS_IE_MASK | STATUS_AD_MASK | \ diff --git a/arch/arc/include/asm/mcip.h b/arch/arc/include/asm/mcip.h index 46f4e53..847e3bb 100644 --- a/arch/arc/include/asm/mcip.h +++ b/arch/arc/include/asm/mcip.h @@ -39,8 +39,8 @@ struct mcip_cmd { #define CMD_DEBUG_SET_MASK 0x34 #define CMD_DEBUG_SET_SELECT 0x36 -#define CMD_GRTC_READ_LO 0x42 -#define CMD_GRTC_READ_HI 0x43 +#define CMD_GFRC_READ_LO 0x42 +#define CMD_GFRC_READ_HI 0x43 #define CMD_IDU_ENABLE 0x71 #define CMD_IDU_DISABLE 0x72 diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h index 57af2f0..d426d42 100644 --- a/arch/arc/include/asm/pgtable.h +++ b/arch/arc/include/asm/pgtable.h @@ -179,37 +179,44 @@ #define __S111 PAGE_U_X_W_R /**************************************************************** - * Page Table Lookup split + * 2 tier (PGD:PTE) software page walker * - * We implement 2 tier paging and since this is all software, we are free - * to customize the span of a PGD / PTE entry to suit us - * - * 32 bit virtual address + * [31] 32 bit virtual address [0] * ------------------------------------------------------- - * | BITS_FOR_PGD | BITS_FOR_PTE | BITS_IN_PAGE | + * | | <------------ PGDIR_SHIFT ----------> | + * | | | + * | BITS_FOR_PGD | BITS_FOR_PTE | <-- PAGE_SHIFT --> | * ------------------------------------------------------- * | | | * | | --> off in page frame - * | | * | ---> index into Page Table - * | * ----> index into Page Directory + * + * In a single page size configuration, only PAGE_SHIFT is fixed + * So both PGD and PTE sizing can be tweaked + * e.g. 8K page (PAGE_SHIFT 13) can have + * - PGDIR_SHIFT 21 -> 11:8:13 address split + * - PGDIR_SHIFT 24 -> 8:11:13 address split + * + * If Super Page is configured, PGDIR_SHIFT becomes fixed too, + * so the sizing flexibility is gone. */ -#define BITS_IN_PAGE PAGE_SHIFT - -/* Optimal Sizing of Pg Tbl - based on MMU page size */ -#if defined(CONFIG_ARC_PAGE_SIZE_8K) -#define BITS_FOR_PTE 8 /* 11:8:13 */ -#elif defined(CONFIG_ARC_PAGE_SIZE_16K) -#define BITS_FOR_PTE 8 /* 10:8:14 */ -#elif defined(CONFIG_ARC_PAGE_SIZE_4K) -#define BITS_FOR_PTE 9 /* 11:9:12 */ +#if defined(CONFIG_ARC_HUGEPAGE_16M) +#define PGDIR_SHIFT 24 +#elif defined(CONFIG_ARC_HUGEPAGE_2M) +#define PGDIR_SHIFT 21 +#else +/* + * Only Normal page support so "hackable" (see comment above) + * Default value provides 11:8:13 (8K), 11:9:12 (4K) + */ +#define PGDIR_SHIFT 21 #endif -#define BITS_FOR_PGD (32 - BITS_FOR_PTE - BITS_IN_PAGE) +#define BITS_FOR_PTE (PGDIR_SHIFT - PAGE_SHIFT) +#define BITS_FOR_PGD (32 - PGDIR_SHIFT) -#define PGDIR_SHIFT (32 - BITS_FOR_PGD) #define PGDIR_SIZE (1UL << PGDIR_SHIFT) /* vaddr span, not PDG sz */ #define PGDIR_MASK (~(PGDIR_SIZE-1)) diff --git a/arch/arc/kernel/entry-arcv2.S b/arch/arc/kernel/entry-arcv2.S index cbfec79..b178302 100644 --- a/arch/arc/kernel/entry-arcv2.S +++ b/arch/arc/kernel/entry-arcv2.S @@ -211,7 +211,11 @@ debug_marker_syscall: ; (since IRQ NOT allowed in DS in ARCv2, this can only happen if orig ; entry was via Exception in DS which got preempted in kernel). ; -; IRQ RTIE won't reliably restore DE bit and/or BTA, needs handling +; IRQ RTIE won't reliably restore DE bit and/or BTA, needs workaround +; +; Solution is return from Intr w/o any delay slot quirks into a kernel trampoline +; and from pure kernel mode return to delay slot which handles DS bit/BTA correctly + .Lintr_ret_to_delay_slot: debug_marker_ds: @@ -222,18 +226,23 @@ debug_marker_ds: ld r2, [sp, PT_ret] ld r3, [sp, PT_status32] + ; STAT32 for Int return created from scratch + ; (No delay dlot, disable Further intr in trampoline) + bic r0, r3, STATUS_U_MASK|STATUS_DE_MASK|STATUS_IE_MASK|STATUS_L_MASK st r0, [sp, PT_status32] mov r1, .Lintr_ret_to_delay_slot_2 st r1, [sp, PT_ret] + ; Orig exception PC/STAT32 safekept @orig_r0 and @event stack slots st r2, [sp, 0] st r3, [sp, 4] b .Lisr_ret_fast_path .Lintr_ret_to_delay_slot_2: + ; Trampoline to restore orig exception PC/STAT32/BTA/AUX_USER_SP sub sp, sp, SZ_PT_REGS st r9, [sp, -4] @@ -243,11 +252,19 @@ debug_marker_ds: ld r9, [sp, 4] sr r9, [erstatus] + ; restore AUX_USER_SP if returning to U mode + bbit0 r9, STATUS_U_BIT, 1f + ld r9, [sp, PT_sp] + sr r9, [AUX_USER_SP] + +1: ld r9, [sp, 8] sr r9, [erbta] ld r9, [sp, -4] add sp, sp, SZ_PT_REGS + + ; return from pure kernel mode to delay slot rtie END(ret_from_exception) diff --git a/arch/arc/kernel/intc-arcv2.c b/arch/arc/kernel/intc-arcv2.c index 0394f9f..9425263 100644 --- a/arch/arc/kernel/intc-arcv2.c +++ b/arch/arc/kernel/intc-arcv2.c @@ -14,6 +14,8 @@ #include <linux/irqchip.h> #include <asm/irq.h> +static int irq_prio; + /* * Early Hardware specific Interrupt setup * -Called very early (start_kernel -> setup_arch -> setup_processor) @@ -24,6 +26,14 @@ void arc_init_IRQ(void) { unsigned int tmp; + struct irq_build { +#ifdef CONFIG_CPU_BIG_ENDIAN + unsigned int pad:3, firq:1, prio:4, exts:8, irqs:8, ver:8; +#else + unsigned int ver:8, irqs:8, exts:8, prio:4, firq:1, pad:3; +#endif + } irq_bcr; + struct aux_irq_ctrl { #ifdef CONFIG_CPU_BIG_ENDIAN unsigned int res3:18, save_idx_regs:1, res2:1, @@ -46,28 +56,25 @@ void arc_init_IRQ(void) WRITE_AUX(AUX_IRQ_CTRL, ictrl); - /* setup status32, don't enable intr yet as kernel doesn't want */ - tmp = read_aux_reg(0xa); - tmp |= ISA_INIT_STATUS_BITS; - tmp &= ~STATUS_IE_MASK; - asm volatile("flag %0 \n"::"r"(tmp)); - /* * ARCv2 core intc provides multiple interrupt priorities (upto 16). * Typical builds though have only two levels (0-high, 1-low) * Linux by default uses lower prio 1 for most irqs, reserving 0 for * NMI style interrupts in future (say perf) - * - * Read the intc BCR to confirm that Linux default priority is avail - * in h/w - * - * Note: - * IRQ_BCR[27..24] contains N-1 (for N priority levels) and prio level - * is 0 based. */ - tmp = (read_aux_reg(ARC_REG_IRQ_BCR) >> 24 ) & 0xF; - if (ARCV2_IRQ_DEF_PRIO > tmp) - panic("Linux default irq prio incorrect\n"); + + READ_BCR(ARC_REG_IRQ_BCR, irq_bcr); + + irq_prio = irq_bcr.prio; /* Encoded as N-1 for N levels */ + pr_info("archs-intc\t: %d priority levels (default %d)%s\n", + irq_prio + 1, irq_prio, + irq_bcr.firq ? " FIRQ (not used)":""); + + /* setup status32, don't enable intr yet as kernel doesn't want */ + tmp = read_aux_reg(0xa); + tmp |= STATUS_AD_MASK | (irq_prio << 1); + tmp &= ~STATUS_IE_MASK; + asm volatile("flag %0 \n"::"r"(tmp)); } static void arcv2_irq_mask(struct irq_data *data) @@ -86,7 +93,7 @@ void arcv2_irq_enable(struct irq_data *data) { /* set default priority */ write_aux_reg(AUX_IRQ_SELECT, data->irq); - write_aux_reg(AUX_IRQ_PRIORITY, ARCV2_IRQ_DEF_PRIO); + write_aux_reg(AUX_IRQ_PRIORITY, irq_prio); /* * hw auto enables (linux unmask) all by default diff --git a/arch/arc/kernel/mcip.c b/arch/arc/kernel/mcip.c index bd237ac..bc771f5 100644 --- a/arch/arc/kernel/mcip.c +++ b/arch/arc/kernel/mcip.c @@ -96,13 +96,13 @@ static void mcip_probe_n_setup(void) #ifdef CONFIG_CPU_BIG_ENDIAN unsigned int pad3:8, idu:1, llm:1, num_cores:6, - iocoh:1, grtc:1, dbg:1, pad2:1, + iocoh:1, gfrc:1, dbg:1, pad2:1, msg:1, sem:1, ipi:1, pad:1, ver:8; #else unsigned int ver:8, pad:1, ipi:1, sem:1, msg:1, - pad2:1, dbg:1, grtc:1, iocoh:1, + pad2:1, dbg:1, gfrc:1, iocoh:1, num_cores:6, llm:1, idu:1, pad3:8; #endif @@ -116,7 +116,7 @@ static void mcip_probe_n_setup(void) IS_AVAIL1(mp.ipi, "IPI "), IS_AVAIL1(mp.idu, "IDU "), IS_AVAIL1(mp.dbg, "DEBUG "), - IS_AVAIL1(mp.grtc, "GRTC")); + IS_AVAIL1(mp.gfrc, "GFRC")); idu_detected = mp.idu; @@ -125,8 +125,8 @@ static void mcip_probe_n_setup(void) __mcip_cmd_data(CMD_DEBUG_SET_MASK, 0xf, 0xf); } - if (IS_ENABLED(CONFIG_ARC_HAS_GRTC) && !mp.grtc) - panic("kernel trying to use non-existent GRTC\n"); + if (IS_ENABLED(CONFIG_ARC_HAS_GFRC) && !mp.gfrc) + panic("kernel trying to use non-existent GFRC\n"); } struct plat_smp_ops plat_smp_ops = { diff --git a/arch/arc/kernel/setup.c b/arch/arc/kernel/setup.c index e1b8744..a7edceb 100644 --- a/arch/arc/kernel/setup.c +++ b/arch/arc/kernel/setup.c @@ -45,6 +45,7 @@ struct cpuinfo_arc cpuinfo_arc700[NR_CPUS]; static void read_arc_build_cfg_regs(void) { struct bcr_perip uncached_space; + struct bcr_timer timer; struct bcr_generic bcr; struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()]; unsigned long perip_space; @@ -53,7 +54,11 @@ static void read_arc_build_cfg_regs(void) READ_BCR(AUX_IDENTITY, cpu->core); READ_BCR(ARC_REG_ISA_CFG_BCR, cpu->isa); - READ_BCR(ARC_REG_TIMERS_BCR, cpu->timers); + READ_BCR(ARC_REG_TIMERS_BCR, timer); + cpu->extn.timer0 = timer.t0; + cpu->extn.timer1 = timer.t1; + cpu->extn.rtc = timer.rtc; + cpu->vec_base = read_aux_reg(AUX_INTR_VEC_BASE); READ_BCR(ARC_REG_D_UNCACH_BCR, uncached_space); @@ -208,9 +213,9 @@ static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len) (unsigned int)(arc_get_core_freq() / 10000) % 100); n += scnprintf(buf + n, len - n, "Timers\t\t: %s%s%s%s\nISA Extn\t: ", - IS_AVAIL1(cpu->timers.t0, "Timer0 "), - IS_AVAIL1(cpu->timers.t1, "Timer1 "), - IS_AVAIL2(cpu->timers.rtc, "64-bit RTC ", + IS_AVAIL1(cpu->extn.timer0, "Timer0 "), + IS_AVAIL1(cpu->extn.timer1, "Timer1 "), + IS_AVAIL2(cpu->extn.rtc, "Local-64-bit-Ctr ", CONFIG_ARC_HAS_RTC)); n += i = scnprintf(buf + n, len - n, "%s%s%s%s%s", @@ -293,13 +298,13 @@ static void arc_chk_core_config(void) struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()]; int fpu_enabled; - if (!cpu->timers.t0) + if (!cpu->extn.timer0) panic("Timer0 is not present!\n"); - if (!cpu->timers.t1) + if (!cpu->extn.timer1) panic("Timer1 is not present!\n"); - if (IS_ENABLED(CONFIG_ARC_HAS_RTC) && !cpu->timers.rtc) + if (IS_ENABLED(CONFIG_ARC_HAS_RTC) && !cpu->extn.rtc) panic("RTC is not present\n"); #ifdef CONFIG_ARC_HAS_DCCM @@ -334,6 +339,7 @@ static void arc_chk_core_config(void) panic("FPU non-existent, disable CONFIG_ARC_FPU_SAVE_RESTORE\n"); if (is_isa_arcv2() && IS_ENABLED(CONFIG_SMP) && cpu->isa.atomic && + IS_ENABLED(CONFIG_ARC_HAS_LLSC) && !IS_ENABLED(CONFIG_ARC_STAR_9000923308)) panic("llock/scond livelock workaround missing\n"); } diff --git a/arch/arc/kernel/time.c b/arch/arc/kernel/time.c index dfad287..156d983 100644 --- a/arch/arc/kernel/time.c +++ b/arch/arc/kernel/time.c @@ -62,7 +62,7 @@ /********** Clock Source Device *********/ -#ifdef CONFIG_ARC_HAS_GRTC +#ifdef CONFIG_ARC_HAS_GFRC static int arc_counter_setup(void) { @@ -83,10 +83,10 @@ static cycle_t arc_counter_read(struct clocksource *cs) local_irq_save(flags); - __mcip_cmd(CMD_GRTC_READ_LO, 0); + __mcip_cmd(CMD_GFRC_READ_LO, 0); stamp.l = read_aux_reg(ARC_REG_MCIP_READBACK); - __mcip_cmd(CMD_GRTC_READ_HI, 0); + __mcip_cmd(CMD_GFRC_READ_HI, 0); stamp.h = read_aux_reg(ARC_REG_MCIP_READBACK); local_irq_restore(flags); @@ -95,7 +95,7 @@ static cycle_t arc_counter_read(struct clocksource *cs) } static struct clocksource arc_counter = { - .name = "ARConnect GRTC", + .name = "ARConnect GFRC", .rating = 400, .read = arc_counter_read, .mask = CLOCKSOURCE_MASK(64), |