diff options
Diffstat (limited to 'drivers/ata/libata-sff.c')
| -rw-r--r-- | drivers/ata/libata-sff.c | 1387 |
1 files changed, 714 insertions, 673 deletions
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index e3877b6..19ddf92 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -40,10 +40,12 @@ #include "libata.h" +static struct workqueue_struct *ata_sff_wq; + const struct ata_port_operations ata_sff_port_ops = { .inherits = &ata_base_port_ops, - .qc_prep = ata_sff_qc_prep, + .qc_prep = ata_noop_qc_prep, .qc_issue = ata_sff_qc_issue, .qc_fill_rtf = ata_sff_qc_fill_rtf, @@ -53,9 +55,7 @@ const struct ata_port_operations ata_sff_port_ops = { .softreset = ata_sff_softreset, .hardreset = sata_sff_hardreset, .postreset = ata_sff_postreset, - .drain_fifo = ata_sff_drain_fifo, .error_handler = ata_sff_error_handler, - .post_internal_cmd = ata_sff_post_internal_cmd, .sff_dev_select = ata_sff_dev_select, .sff_check_status = ata_sff_check_status, @@ -63,178 +63,13 @@ const struct ata_port_operations ata_sff_port_ops = { .sff_tf_read = ata_sff_tf_read, .sff_exec_command = ata_sff_exec_command, .sff_data_xfer = ata_sff_data_xfer, - .sff_irq_on = ata_sff_irq_on, .sff_irq_clear = ata_sff_irq_clear, + .sff_drain_fifo = ata_sff_drain_fifo, .lost_interrupt = ata_sff_lost_interrupt, - - .port_start = ata_sff_port_start, }; EXPORT_SYMBOL_GPL(ata_sff_port_ops); -const struct ata_port_operations ata_bmdma_port_ops = { - .inherits = &ata_sff_port_ops, - - .mode_filter = ata_bmdma_mode_filter, - - .bmdma_setup = ata_bmdma_setup, - .bmdma_start = ata_bmdma_start, - .bmdma_stop = ata_bmdma_stop, - .bmdma_status = ata_bmdma_status, -}; -EXPORT_SYMBOL_GPL(ata_bmdma_port_ops); - -const struct ata_port_operations ata_bmdma32_port_ops = { - .inherits = &ata_bmdma_port_ops, - - .sff_data_xfer = ata_sff_data_xfer32, - .port_start = ata_sff_port_start32, -}; -EXPORT_SYMBOL_GPL(ata_bmdma32_port_ops); - -/** - * ata_fill_sg - Fill PCI IDE PRD table - * @qc: Metadata associated with taskfile to be transferred - * - * Fill PCI IDE PRD (scatter-gather) table with segments - * associated with the current disk command. - * - * LOCKING: - * spin_lock_irqsave(host lock) - * - */ -static void ata_fill_sg(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct scatterlist *sg; - unsigned int si, pi; - - pi = 0; - for_each_sg(qc->sg, sg, qc->n_elem, si) { - u32 addr, offset; - u32 sg_len, len; - - /* determine if physical DMA addr spans 64K boundary. - * Note h/w doesn't support 64-bit, so we unconditionally - * truncate dma_addr_t to u32. - */ - addr = (u32) sg_dma_address(sg); - sg_len = sg_dma_len(sg); - - while (sg_len) { - offset = addr & 0xffff; - len = sg_len; - if ((offset + sg_len) > 0x10000) - len = 0x10000 - offset; - - ap->prd[pi].addr = cpu_to_le32(addr); - ap->prd[pi].flags_len = cpu_to_le32(len & 0xffff); - VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len); - - pi++; - sg_len -= len; - addr += len; - } - } - - ap->prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); -} - -/** - * ata_fill_sg_dumb - Fill PCI IDE PRD table - * @qc: Metadata associated with taskfile to be transferred - * - * Fill PCI IDE PRD (scatter-gather) table with segments - * associated with the current disk command. Perform the fill - * so that we avoid writing any length 64K records for - * controllers that don't follow the spec. - * - * LOCKING: - * spin_lock_irqsave(host lock) - * - */ -static void ata_fill_sg_dumb(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - struct scatterlist *sg; - unsigned int si, pi; - - pi = 0; - for_each_sg(qc->sg, sg, qc->n_elem, si) { - u32 addr, offset; - u32 sg_len, len, blen; - - /* determine if physical DMA addr spans 64K boundary. - * Note h/w doesn't support 64-bit, so we unconditionally - * truncate dma_addr_t to u32. - */ - addr = (u32) sg_dma_address(sg); - sg_len = sg_dma_len(sg); - - while (sg_len) { - offset = addr & 0xffff; - len = sg_len; - if ((offset + sg_len) > 0x10000) - len = 0x10000 - offset; - - blen = len & 0xffff; - ap->prd[pi].addr = cpu_to_le32(addr); - if (blen == 0) { - /* Some PATA chipsets like the CS5530 can't - cope with 0x0000 meaning 64K as the spec - says */ - ap->prd[pi].flags_len = cpu_to_le32(0x8000); - blen = 0x8000; - ap->prd[++pi].addr = cpu_to_le32(addr + 0x8000); - } - ap->prd[pi].flags_len = cpu_to_le32(blen); - VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len); - - pi++; - sg_len -= len; - addr += len; - } - } - - ap->prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); -} - -/** - * ata_sff_qc_prep - Prepare taskfile for submission - * @qc: Metadata associated with taskfile to be prepared - * - * Prepare ATA taskfile for submission. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ -void ata_sff_qc_prep(struct ata_queued_cmd *qc) -{ - if (!(qc->flags & ATA_QCFLAG_DMAMAP)) - return; - - ata_fill_sg(qc); -} -EXPORT_SYMBOL_GPL(ata_sff_qc_prep); - -/** - * ata_sff_dumb_qc_prep - Prepare taskfile for submission - * @qc: Metadata associated with taskfile to be prepared - * - * Prepare ATA taskfile for submission. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ -void ata_sff_dumb_qc_prep(struct ata_queued_cmd *qc) -{ - if (!(qc->flags & ATA_QCFLAG_DMAMAP)) - return; - - ata_fill_sg_dumb(qc); -} -EXPORT_SYMBOL_GPL(ata_sff_dumb_qc_prep); - /** * ata_sff_check_status - Read device status reg & clear interrupt * @ap: port where the device is @@ -446,6 +281,27 @@ int ata_sff_wait_ready(struct ata_link *link, unsigned long deadline) EXPORT_SYMBOL_GPL(ata_sff_wait_ready); /** + * ata_sff_set_devctl - Write device control reg + * @ap: port where the device is + * @ctl: value to write + * + * Writes ATA taskfile device control register. + * + * Note: may NOT be used as the sff_set_devctl() entry in + * ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ +static void ata_sff_set_devctl(struct ata_port *ap, u8 ctl) +{ + if (ap->ops->sff_set_devctl) + ap->ops->sff_set_devctl(ap, ctl); + else + iowrite8(ctl, ap->ioaddr.ctl_addr); +} + +/** * ata_sff_dev_select - Select device 0/1 on ATA bus * @ap: ATA channel to manipulate * @device: ATA device (numbered from zero) to select @@ -491,7 +347,7 @@ EXPORT_SYMBOL_GPL(ata_sff_dev_select); * LOCKING: * caller. */ -void ata_dev_select(struct ata_port *ap, unsigned int device, +static void ata_dev_select(struct ata_port *ap, unsigned int device, unsigned int wait, unsigned int can_sleep) { if (ata_msg_probe(ap)) @@ -517,24 +373,29 @@ void ata_dev_select(struct ata_port *ap, unsigned int device, * Enable interrupts on a legacy IDE device using MMIO or PIO, * wait for idle, clear any pending interrupts. * + * Note: may NOT be used as the sff_irq_on() entry in + * ata_port_operations. + * * LOCKING: * Inherited from caller. */ -u8 ata_sff_irq_on(struct ata_port *ap) +void ata_sff_irq_on(struct ata_port *ap) { struct ata_ioports *ioaddr = &ap->ioaddr; - u8 tmp; + + if (ap->ops->sff_irq_on) { + ap->ops->sff_irq_on(ap); + return; + } ap->ctl &= ~ATA_NIEN; ap->last_ctl = ap->ctl; - if (ioaddr->ctl_addr) - iowrite8(ap->ctl, ioaddr->ctl_addr); - tmp = ata_wait_idle(ap); + if (ap->ops->sff_set_devctl || ioaddr->ctl_addr) + ata_sff_set_devctl(ap, ap->ctl); + ata_wait_idle(ap); ap->ops->sff_irq_clear(ap); - - return tmp; } EXPORT_SYMBOL_GPL(ata_sff_irq_on); @@ -579,7 +440,6 @@ void ata_sff_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) if (ioaddr->ctl_addr) iowrite8(tf->ctl, ioaddr->ctl_addr); ap->last_ctl = tf->ctl; - ata_wait_idle(ap); } if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) { @@ -615,8 +475,6 @@ void ata_sff_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) iowrite8(tf->device, ioaddr->device_addr); VPRINTK("device 0x%X\n", tf->device); } - - ata_wait_idle(ap); } EXPORT_SYMBOL_GPL(ata_sff_tf_load); @@ -894,7 +752,7 @@ static void ata_pio_sector(struct ata_queued_cmd *qc) do_write); } - if (!do_write) + if (!do_write && !PageSlab(page)) flush_dcache_page(page); qc->curbytes += qc->sect_size; @@ -1165,7 +1023,7 @@ static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq) qc = ata_qc_from_tag(ap, qc->tag); if (qc) { if (likely(!(qc->err_mask & AC_ERR_HSM))) { - ap->ops->sff_irq_on(ap); + ata_sff_irq_on(ap); ata_qc_complete(qc); } else ata_port_freeze(ap); @@ -1181,7 +1039,7 @@ static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq) } else { if (in_wq) { spin_lock_irqsave(ap->lock, flags); - ap->ops->sff_irq_on(ap); + ata_sff_irq_on(ap); ata_qc_complete(qc); spin_unlock_irqrestore(ap->lock, flags); } else @@ -1293,7 +1151,7 @@ fsm_start: if (in_wq) spin_unlock_irqrestore(ap->lock, flags); - /* if polling, ata_pio_task() handles the rest. + /* if polling, ata_sff_pio_task() handles the rest. * otherwise, interrupt handler takes over from here. */ break; @@ -1458,14 +1316,38 @@ fsm_start: } EXPORT_SYMBOL_GPL(ata_sff_hsm_move); -void ata_pio_task(struct work_struct *work) +void ata_sff_queue_pio_task(struct ata_port *ap, unsigned long delay) +{ + /* may fail if ata_sff_flush_pio_task() in progress */ + queue_delayed_work(ata_sff_wq, &ap->sff_pio_task, + msecs_to_jiffies(delay)); +} +EXPORT_SYMBOL_GPL(ata_sff_queue_pio_task); + +void ata_sff_flush_pio_task(struct ata_port *ap) +{ + DPRINTK("ENTER\n"); + + cancel_rearming_delayed_work(&ap->sff_pio_task); + ap->hsm_task_state = HSM_ST_IDLE; + + if (ata_msg_ctl(ap)) + ata_port_printk(ap, KERN_DEBUG, "%s: EXIT\n", __func__); +} + +static void ata_sff_pio_task(struct work_struct *work) { struct ata_port *ap = - container_of(work, struct ata_port, port_task.work); - struct ata_queued_cmd *qc = ap->port_task_data; + container_of(work, struct ata_port, sff_pio_task.work); + struct ata_queued_cmd *qc; u8 status; int poll_next; + /* qc can be NULL if timeout occurred */ + qc = ata_qc_from_tag(ap, ap->link.active_tag); + if (!qc) + return; + fsm_start: WARN_ON_ONCE(ap->hsm_task_state == HSM_ST_IDLE); @@ -1481,7 +1363,7 @@ fsm_start: msleep(2); status = ata_sff_busy_wait(ap, ATA_BUSY, 10); if (status & ATA_BUSY) { - ata_pio_queue_task(ap, qc, ATA_SHORT_PAUSE); + ata_sff_queue_pio_task(ap, ATA_SHORT_PAUSE); return; } } @@ -1497,15 +1379,11 @@ fsm_start: } /** - * ata_sff_qc_issue - issue taskfile to device in proto-dependent manner + * ata_sff_qc_issue - issue taskfile to a SFF controller * @qc: command to issue to device * - * Using various libata functions and hooks, this function - * starts an ATA command. ATA commands are grouped into - * classes called "protocols", and issuing each type of protocol - * is slightly different. - * - * May be used as the qc_issue() entry in ata_port_operations. + * This function issues a PIO or NODATA command to a SFF + * controller. * * LOCKING: * spin_lock_irqsave(host lock) @@ -1520,23 +1398,8 @@ unsigned int ata_sff_qc_issue(struct ata_queued_cmd *qc) /* Use polling pio if the LLD doesn't handle * interrupt driven pio and atapi CDB interrupt. */ - if (ap->flags & ATA_FLAG_PIO_POLLING) { - switch (qc->tf.protocol) { - case ATA_PROT_PIO: - case ATA_PROT_NODATA: - case ATAPI_PROT_PIO: - case ATAPI_PROT_NODATA: - qc->tf.flags |= ATA_TFLAG_POLLING; - break; - case ATAPI_PROT_DMA: - if (qc->dev->flags & ATA_DFLAG_CDB_INTR) - /* see ata_dma_blacklisted() */ - BUG(); - break; - default: - break; - } - } + if (ap->flags & ATA_FLAG_PIO_POLLING) + qc->tf.flags |= ATA_TFLAG_POLLING; /* select the device */ ata_dev_select(ap, qc->dev->devno, 1, 0); @@ -1551,17 +1414,8 @@ unsigned int ata_sff_qc_issue(struct ata_queued_cmd *qc) ap->hsm_task_state = HSM_ST_LAST; if (qc->tf.flags & ATA_TFLAG_POLLING) - ata_pio_queue_task(ap, qc, 0); - - break; - - case ATA_PROT_DMA: - WARN_ON_ONCE(qc->tf.flags & ATA_TFLAG_POLLING); + ata_sff_queue_pio_task(ap, 0); - ap->ops->sff_tf_load(ap, &qc->tf); /* load tf registers */ - ap->ops->bmdma_setup(qc); /* set up bmdma */ - ap->ops->bmdma_start(qc); /* initiate bmdma */ - ap->hsm_task_state = HSM_ST_LAST; break; case ATA_PROT_PIO: @@ -1573,20 +1427,21 @@ unsigned int ata_sff_qc_issue(struct ata_queued_cmd *qc) if (qc->tf.flags & ATA_TFLAG_WRITE) { /* PIO data out protocol */ ap->hsm_task_state = HSM_ST_FIRST; - ata_pio_queue_task(ap, qc, 0); + ata_sff_queue_pio_task(ap, 0); - /* always send first data block using - * the ata_pio_task() codepath. + /* always send first data block using the + * ata_sff_pio_task() codepath. */ } else { /* PIO data in protocol */ ap->hsm_task_state = HSM_ST; if (qc->tf.flags & ATA_TFLAG_POLLING) - ata_pio_queue_task(ap, qc, 0); + ata_sff_queue_pio_task(ap, 0); - /* if polling, ata_pio_task() handles the rest. - * otherwise, interrupt handler takes over from here. + /* if polling, ata_sff_pio_task() handles the + * rest. otherwise, interrupt handler takes + * over from here. */ } @@ -1604,19 +1459,7 @@ unsigned int ata_sff_qc_issue(struct ata_queued_cmd *qc) /* send cdb by polling if no cdb interrupt */ if ((!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) || (qc->tf.flags & ATA_TFLAG_POLLING)) - ata_pio_queue_task(ap, qc, 0); - break; - - case ATAPI_PROT_DMA: - WARN_ON_ONCE(qc->tf.flags & ATA_TFLAG_POLLING); - - ap->ops->sff_tf_load(ap, &qc->tf); /* load tf registers */ - ap->ops->bmdma_setup(qc); /* set up bmdma */ - ap->hsm_task_state = HSM_ST_FIRST; - - /* send cdb by polling if no cdb interrupt */ - if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) - ata_pio_queue_task(ap, qc, 0); + ata_sff_queue_pio_task(ap, 0); break; default: @@ -1728,7 +1571,7 @@ unsigned int ata_sff_host_intr(struct ata_port *ap, goto idle_irq; } - /* ack bmdma irq events */ + /* clear irq events */ ap->ops->sff_irq_clear(ap); ata_sff_hsm_move(ap, qc, status, 0); @@ -1785,9 +1628,6 @@ retry: struct ata_port *ap = host->ports[i]; struct ata_queued_cmd *qc; - if (unlikely(ap->flags & ATA_FLAG_DISABLED)) - continue; - qc = ata_qc_from_tag(ap, ap->link.active_tag); if (qc) { if (!(qc->tf.flags & ATA_TFLAG_POLLING)) @@ -1862,11 +1702,8 @@ void ata_sff_lost_interrupt(struct ata_port *ap) /* Only one outstanding command per SFF channel */ qc = ata_qc_from_tag(ap, ap->link.active_tag); - /* Check we have a live one.. */ - if (qc == NULL || !(qc->flags & ATA_QCFLAG_ACTIVE)) - return; - /* We cannot lose an interrupt on a polled command */ - if (qc->tf.flags & ATA_TFLAG_POLLING) + /* We cannot lose an interrupt on a non-existent or polled command */ + if (!qc || qc->tf.flags & ATA_TFLAG_POLLING) return; /* See if the controller thinks it is still busy - if so the command isn't a lost IRQ but is still in progress */ @@ -1888,20 +1725,18 @@ EXPORT_SYMBOL_GPL(ata_sff_lost_interrupt); * ata_sff_freeze - Freeze SFF controller port * @ap: port to freeze * - * Freeze BMDMA controller port. + * Freeze SFF controller port. * * LOCKING: * Inherited from caller. */ void ata_sff_freeze(struct ata_port *ap) { - struct ata_ioports *ioaddr = &ap->ioaddr; - ap->ctl |= ATA_NIEN; ap->last_ctl = ap->ctl; - if (ioaddr->ctl_addr) - iowrite8(ap->ctl, ioaddr->ctl_addr); + if (ap->ops->sff_set_devctl || ap->ioaddr.ctl_addr) + ata_sff_set_devctl(ap, ap->ctl); /* Under certain circumstances, some controllers raise IRQ on * ATA_NIEN manipulation. Also, many controllers fail to mask @@ -1927,7 +1762,7 @@ void ata_sff_thaw(struct ata_port *ap) /* clear & re-enable interrupts */ ap->ops->sff_check_status(ap); ap->ops->sff_irq_clear(ap); - ap->ops->sff_irq_on(ap); + ata_sff_irq_on(ap); } EXPORT_SYMBOL_GPL(ata_sff_thaw); @@ -2301,8 +2136,8 @@ void ata_sff_postreset(struct ata_link *link, unsigned int *classes) } /* set up device control */ - if (ap->ioaddr.ctl_addr) { - iowrite8(ap->ctl, ap->ioaddr.ctl_addr); + if (ap->ops->sff_set_devctl || ap->ioaddr.ctl_addr) { + ata_sff_set_devctl(ap, ap->ctl); ap->last_ctl = ap->ctl; } } @@ -2342,7 +2177,7 @@ void ata_sff_drain_fifo(struct ata_queued_cmd *qc) EXPORT_SYMBOL_GPL(ata_sff_drain_fifo); /** - * ata_sff_error_handler - Stock error handler for BMDMA controller + * ata_sff_error_handler - Stock error handler for SFF controller * @ap: port to handle error for * * Stock error handler for SFF controller. It can handle both @@ -2359,62 +2194,32 @@ void ata_sff_error_handler(struct ata_port *ap) ata_reset_fn_t hardreset = ap->ops->hardreset; struct ata_queued_cmd *qc; unsigned long flags; - int thaw = 0; qc = __ata_qc_from_tag(ap, ap->link.active_tag); if (qc && !(qc->flags & ATA_QCFLAG_FAILED)) qc = NULL; - /* reset PIO HSM and stop DMA engine */ spin_lock_irqsave(ap->lock, flags); - ap->hsm_task_state = HSM_ST_IDLE; - - if (ap->ioaddr.bmdma_addr && - qc && (qc->tf.protocol == ATA_PROT_DMA || - qc->tf.protocol == ATAPI_PROT_DMA)) { - u8 host_stat; - - host_stat = ap->ops->bmdma_status(ap); - - /* BMDMA controllers indicate host bus error by - * setting DMA_ERR bit and timing out. As it wasn't - * really a timeout event, adjust error mask and - * cancel frozen state. - */ - if (qc->err_mask == AC_ERR_TIMEOUT - && (host_stat & ATA_DMA_ERR)) { - qc->err_mask = AC_ERR_HOST_BUS; - thaw = 1; - } - - ap->ops->bmdma_stop(qc); - } - - ata_sff_sync(ap); /* FIXME: We don't need this */ - ap->ops->sff_check_status(ap); - ap->ops->sff_irq_clear(ap); - /* We *MUST* do FIFO draining before we issue a reset as several - * devices helpfully clear their internal state and will lock solid - * if we touch the data port post reset. Pass qc in case anyone wants - * to do different PIO/DMA recovery or has per command fixups + /* + * We *MUST* do FIFO draining before we issue a reset as + * several devices helpfully clear their internal state and + * will lock solid if we touch the data port post reset. Pass + * qc in case anyone wants to do different PIO/DMA recovery or + * has per command fixups */ - if (ap->ops->drain_fifo) - ap->ops->drain_fifo(qc); + if (ap->ops->sff_drain_fifo) + ap->ops->sff_drain_fifo(qc); spin_unlock_irqrestore(ap->lock, flags); - if (thaw) - ata_eh_thaw_port(ap); - - /* PIO and DMA engines have been stopped, perform recovery */ - - /* Ignore ata_sff_softreset if ctl isn't accessible and - * built-in hardresets if SCR access isn't available. - */ + /* ignore ata_sff_softreset if ctl isn't accessible */ if (softreset == ata_sff_softreset && !ap->ioaddr.ctl_addr) softreset = NULL; - if (ata_is_builtin_hardreset(hardreset) && !sata_scr_valid(&ap->link)) + + /* ignore built-in hardresets if SCR access is not available */ + if ((hardreset == sata_std_hardreset || + hardreset == sata_sff_hardreset) && !sata_scr_valid(&ap->link)) hardreset = NULL; ata_do_eh(ap, ap->ops->prereset, softreset, hardreset, @@ -2423,73 +2228,6 @@ void ata_sff_error_handler(struct ata_port *ap) EXPORT_SYMBOL_GPL(ata_sff_error_handler); /** - * ata_sff_post_internal_cmd - Stock post_internal_cmd for SFF controller - * @qc: internal command to clean up - * - * LOCKING: - * Kernel thread context (may sleep) - */ -void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - unsigned long flags; - - spin_lock_irqsave(ap->lock, flags); - - ap->hsm_task_state = HSM_ST_IDLE; - - if (ap->ioaddr.bmdma_addr) - ap->ops->bmdma_stop(qc); - - spin_unlock_irqrestore(ap->lock, flags); -} -EXPORT_SYMBOL_GPL(ata_sff_post_internal_cmd); - -/** - * ata_sff_port_start - Set port up for dma. - * @ap: Port to initialize - * - * Called just after data structures for each port are - * initialized. Allocates space for PRD table if the device - * is DMA capable SFF. - * - * May be used as the port_start() entry in ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ -int ata_sff_port_start(struct ata_port *ap) -{ - if (ap->ioaddr.bmdma_addr) - return ata_port_start(ap); - return 0; -} -EXPORT_SYMBOL_GPL(ata_sff_port_start); - -/** - * ata_sff_port_start32 - Set port up for dma. - * @ap: Port to initialize - * - * Called just after data structures for each port are - * initialized. Allocates space for PRD table if the device - * is DMA capable SFF. - * - * May be used as the port_start() entry in ata_port_operations for - * devices that are capable of 32bit PIO. - * - * LOCKING: - * Inherited from caller. - */ -int ata_sff_port_start32(struct ata_port *ap) -{ - ap->pflags |= ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE; - if (ap->ioaddr.bmdma_addr) - return ata_port_start(ap); - return 0; -} -EXPORT_SYMBOL_GPL(ata_sff_port_start32); - -/** * ata_sff_std_ports - initialize ioaddr with standard port offsets. * @ioaddr: IO address structure to be initialized * @@ -2515,302 +2253,8 @@ void ata_sff_std_ports(struct ata_ioports *ioaddr) } EXPORT_SYMBOL_GPL(ata_sff_std_ports); -unsigned long ata_bmdma_mode_filter(struct ata_device *adev, - unsigned long xfer_mask) -{ - /* Filter out DMA modes if the device has been configured by - the BIOS as PIO only */ - - if (adev->link->ap->ioaddr.bmdma_addr == NULL) - xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); - return xfer_mask; -} -EXPORT_SYMBOL_GPL(ata_bmdma_mode_filter); - -/** - * ata_bmdma_setup - Set up PCI IDE BMDMA transaction - * @qc: Info associated with this ATA transaction. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ -void ata_bmdma_setup(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); - u8 dmactl; - - /* load PRD table addr. */ - mb(); /* make sure PRD table writes are visible to controller */ - iowrite32(ap->prd_dma, ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS); - - /* specify data direction, triple-check start bit is clear */ - dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); - dmactl &= ~(ATA_DMA_WR | ATA_DMA_START); - if (!rw) - dmactl |= ATA_DMA_WR; - iowrite8(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD); - - /* issue r/w command */ - ap->ops->sff_exec_command(ap, &qc->tf); -} -EXPORT_SYMBOL_GPL(ata_bmdma_setup); - -/** - * ata_bmdma_start - Start a PCI IDE BMDMA transaction - * @qc: Info associated with this ATA transaction. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ -void ata_bmdma_start(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - u8 dmactl; - - /* start host DMA transaction */ - dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); - iowrite8(dmactl | ATA_DMA_START, ap->ioaddr.bmdma_addr + ATA_DMA_CMD); - - /* Strictly, one may wish to issue an ioread8() here, to - * flush the mmio write. However, control also passes - * to the hardware at this point, and it will interrupt - * us when we are to resume control. So, in effect, - * we don't care when the mmio write flushes. - * Further, a read of the DMA status register _immediately_ - * following the write may not be what certain flaky hardware - * is expected, so I think it is best to not add a readb() - * without first all the MMIO ATA cards/mobos. - * Or maybe I'm just being paranoid. - * - * FIXME: The posting of this write means I/O starts are - * unneccessarily delayed for MMIO - */ -} -EXPORT_SYMBOL_GPL(ata_bmdma_start); - -/** - * ata_bmdma_stop - Stop PCI IDE BMDMA transfer - * @qc: Command we are ending DMA for - * - * Clears the ATA_DMA_START flag in the dma control register - * - * May be used as the bmdma_stop() entry in ata_port_operations. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ -void ata_bmdma_stop(struct ata_queued_cmd *qc) -{ - struct ata_port *ap = qc->ap; - void __iomem *mmio = ap->ioaddr.bmdma_addr; - - /* clear start/stop bit */ - iowrite8(ioread8(mmio + ATA_DMA_CMD) & ~ATA_DMA_START, - mmio + ATA_DMA_CMD); - - /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ - ata_sff_dma_pause(ap); -} -EXPORT_SYMBOL_GPL(ata_bmdma_stop); - -/** - * ata_bmdma_status - Read PCI IDE BMDMA status - * @ap: Port associated with this ATA transaction. - * - * Read and return BMDMA status register. - * - * May be used as the bmdma_status() entry in ata_port_operations. - * - * LOCKING: - * spin_lock_irqsave(host lock) - */ -u8 ata_bmdma_status(struct ata_port *ap) -{ - return ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); -} -EXPORT_SYMBOL_GPL(ata_bmdma_status); - -/** - * ata_bus_reset - reset host port and associated ATA channel - * @ap: port to reset - * - * This is typically the first time we actually start issuing - * commands to the ATA channel. We wait for BSY to clear, then - * issue EXECUTE DEVICE DIAGNOSTIC command, polling for its - * result. Determine what devices, if any, are on the channel - * by looking at the device 0/1 error register. Look at the signature - * stored in each device's taskfile registers, to determine if - * the device is ATA or ATAPI. - * - * LOCKING: - * PCI/etc. bus probe sem. - * Obtains host lock. - * - * SIDE EFFECTS: - * Sets ATA_FLAG_DISABLED if bus reset fails. - * - * DEPRECATED: - * This function is only for drivers which still use old EH and - * will be removed soon. - */ -void ata_bus_reset(struct ata_port *ap) -{ - struct ata_device *device = ap->link.device; - struct ata_ioports *ioaddr = &ap->ioaddr; - unsigned int slave_possible = ap->flags & ATA_FLAG_SLAVE_POSS; - u8 err; - unsigned int dev0, dev1 = 0, devmask = 0; - int rc; - - DPRINTK("ENTER, host %u, port %u\n", ap->print_id, ap->port_no); - - /* determine if device 0/1 are present */ - if (ap->flags & ATA_FLAG_SATA_RESET) - dev0 = 1; - else { - dev0 = ata_devchk(ap, 0); - if (slave_possible) - dev1 = ata_devchk(ap, 1); - } - - if (dev0) - devmask |= (1 << 0); - if (dev1) - devmask |= (1 << 1); - - /* select device 0 again */ - ap->ops->sff_dev_select(ap, 0); - - /* issue bus reset */ - if (ap->flags & ATA_FLAG_SRST) { - rc = ata_bus_softreset(ap, devmask, - ata_deadline(jiffies, 40000)); - if (rc && rc != -ENODEV) - goto err_out; - } - - /* - * determine by signature whether we have ATA or ATAPI devices - */ - device[0].class = ata_sff_dev_classify(&device[0], dev0, &err); - if ((slave_possible) && (err != 0x81)) - device[1].class = ata_sff_dev_classify(&device[1], dev1, &err); - - /* is double-select really necessary? */ - if (device[1].class != ATA_DEV_NONE) - ap->ops->sff_dev_select(ap, 1); - if (device[0].class != ATA_DEV_NONE) - ap->ops->sff_dev_select(ap, 0); - - /* if no devices were detected, disable this port */ - if ((device[0].class == ATA_DEV_NONE) && - (device[1].class == ATA_DEV_NONE)) - goto err_out; - - if (ap->flags & (ATA_FLAG_SATA_RESET | ATA_FLAG_SRST)) { - /* set up device control for ATA_FLAG_SATA_RESET */ - iowrite8(ap->ctl, ioaddr->ctl_addr); - ap->last_ctl = ap->ctl; - } - - DPRINTK("EXIT\n"); - return; - -err_out: - ata_port_printk(ap, KERN_ERR, "disabling port\n"); - ata_port_disable(ap); - - DPRINTK("EXIT\n"); -} -EXPORT_SYMBOL_GPL(ata_bus_reset); - #ifdef CONFIG_PCI -/** - * ata_pci_bmdma_clear_simplex - attempt to kick device out of simplex - * @pdev: PCI device - * - * Some PCI ATA devices report simplex mode but in fact can be told to - * enter non simplex mode. This implements the necessary logic to - * perform the task on such devices. Calling it on other devices will - * have -undefined- behaviour. - */ -int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev) -{ - unsigned long bmdma = pci_resource_start(pdev, 4); - u8 simplex; - - if (bmdma == 0) - return -ENOENT; - - simplex = inb(bmdma + 0x02); - outb(simplex & 0x60, bmdma + 0x02); - simplex = inb(bmdma + 0x02); - if (simplex & 0x80) - return -EOPNOTSUPP; - return 0; -} -EXPORT_SYMBOL_GPL(ata_pci_bmdma_clear_simplex); - -/** - * ata_pci_bmdma_init - acquire PCI BMDMA resources and init ATA host - * @host: target ATA host - * - * Acquire PCI BMDMA resources and initialize @host accordingly. - * - * LOCKING: - * Inherited from calling layer (may sleep). - * - * RETURNS: - * 0 on success, -errno otherwise. - */ -int ata_pci_bmdma_init(struct ata_host *host) -{ - struct device *gdev = host->dev; - struct pci_dev *pdev = to_pci_dev(gdev); - int i, rc; - - /* No BAR4 allocation: No DMA */ - if (pci_resource_start(pdev, 4) == 0) - return 0; - - /* TODO: If we get no DMA mask we should fall back to PIO */ - rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - return rc; - rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - return rc; - - /* request and iomap DMA region */ - rc = pcim_iomap_regions(pdev, 1 << 4, dev_driver_string(gdev)); - if (rc) { - dev_printk(KERN_ERR, gdev, "failed to request/iomap BAR4\n"); - return -ENOMEM; - } - host->iomap = pcim_iomap_table(pdev); - - for (i = 0; i < 2; i++) { - struct ata_port *ap = host->ports[i]; - void __iomem *bmdma = host->iomap[4] + 8 * i; - - if (ata_port_is_dummy(ap)) - continue; - - ap->ioaddr.bmdma_addr = bmdma; - if ((!(ap->flags & ATA_FLAG_IGN_SIMPLEX)) && - (ioread8(bmdma + 2) & 0x80)) - host->flags |= ATA_HOST_SIMPLEX; - - ata_port_desc(ap, "bmdma 0x%llx", - (unsigned long long)pci_resource_start(pdev, 4) + 8 * i); - } - - return 0; -} -EXPORT_SYMBOL_GPL(ata_pci_bmdma_init); - static int ata_resources_present(struct pci_dev *pdev, int port) { int i; @@ -2942,21 +2386,12 @@ int ata_pci_sff_prepare_host(struct pci_dev *pdev, goto err_out; /* init DMA related stuff */ - rc = ata_pci_bmdma_init(host); - if (rc) - goto err_bmdma; + ata_pci_bmdma_init(host); devres_remove_group(&pdev->dev, NULL); *r_host = host; return 0; -err_bmdma: - /* This is necessary because PCI and iomap resources are - * merged and releasing the top group won't release the - * acquired resources if some of those have been acquired - * before entering this function. - */ - pcim_iounmap_regions(pdev, 0xf); err_out: devres_release_group(&pdev->dev, NULL); return rc; @@ -3135,3 +2570,609 @@ out: EXPORT_SYMBOL_GPL(ata_pci_sff_init_one); #endif /* CONFIG_PCI */ + +const struct ata_port_operations ata_bmdma_port_ops = { + .inherits = &ata_sff_port_ops, + + .error_handler = ata_bmdma_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .qc_prep = ata_bmdma_qc_prep, + .qc_issue = ata_bmdma_qc_issue, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + + .port_start = ata_bmdma_port_start, +}; +EXPORT_SYMBOL_GPL(ata_bmdma_port_ops); + +const struct ata_port_operations ata_bmdma32_port_ops = { + .inherits = &ata_bmdma_port_ops, + + .sff_data_xfer = ata_sff_data_xfer32, + .port_start = ata_bmdma_port_start32, +}; +EXPORT_SYMBOL_GPL(ata_bmdma32_port_ops); + +/** + * ata_bmdma_fill_sg - Fill PCI IDE PRD table + * @qc: Metadata associated with taskfile to be transferred + * + * Fill PCI IDE PRD (scatter-gather) table with segments + * associated with the current disk command. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + */ +static void ata_bmdma_fill_sg(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_bmdma_prd *prd = ap->bmdma_prd; + struct scatterlist *sg; + unsigned int si, pi; + + pi = 0; + for_each_sg(qc->sg, sg, qc->n_elem, si) { + u32 addr, offset; + u32 sg_len, len; + + /* determine if physical DMA addr spans 64K boundary. + * Note h/w doesn't support 64-bit, so we unconditionally + * truncate dma_addr_t to u32. + */ + addr = (u32) sg_dma_address(sg); + sg_len = sg_dma_len(sg); + + while (sg_len) { + offset = addr & 0xffff; + len = sg_len; + if ((offset + sg_len) > 0x10000) + len = 0x10000 - offset; + + prd[pi].addr = cpu_to_le32(addr); + prd[pi].flags_len = cpu_to_le32(len & 0xffff); + VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len); + + pi++; + sg_len -= len; + addr += len; + } + } + + prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); +} + +/** + * ata_bmdma_fill_sg_dumb - Fill PCI IDE PRD table + * @qc: Metadata associated with taskfile to be transferred + * + * Fill PCI IDE PRD (scatter-gather) table with segments + * associated with the current disk command. Perform the fill + * so that we avoid writing any length 64K records for + * controllers that don't follow the spec. + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + */ +static void ata_bmdma_fill_sg_dumb(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ata_bmdma_prd *prd = ap->bmdma_prd; + struct scatterlist *sg; + unsigned int si, pi; + + pi = 0; + for_each_sg(qc->sg, sg, qc->n_elem, si) { + u32 addr, offset; + u32 sg_len, len, blen; + + /* determine if physical DMA addr spans 64K boundary. + * Note h/w doesn't support 64-bit, so we unconditionally + * truncate dma_addr_t to u32. + */ + addr = (u32) sg_dma_address(sg); + sg_len = sg_dma_len(sg); + + while (sg_len) { + offset = addr & 0xffff; + len = sg_len; + if ((offset + sg_len) > 0x10000) + len = 0x10000 - offset; + + blen = len & 0xffff; + prd[pi].addr = cpu_to_le32(addr); + if (blen == 0) { + /* Some PATA chipsets like the CS5530 can't + cope with 0x0000 meaning 64K as the spec + says */ + prd[pi].flags_len = cpu_to_le32(0x8000); + blen = 0x8000; + prd[++pi].addr = cpu_to_le32(addr + 0x8000); + } + prd[pi].flags_len = cpu_to_le32(blen); + VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, len); + + pi++; + sg_len -= len; + addr += len; + } + } + + prd[pi - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT); +} + +/** + * ata_bmdma_qc_prep - Prepare taskfile for submission + * @qc: Metadata associated with taskfile to be prepared + * + * Prepare ATA taskfile for submission. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_bmdma_qc_prep(struct ata_queued_cmd *qc) +{ + if (!(qc->flags & ATA_QCFLAG_DMAMAP)) + return; + + ata_bmdma_fill_sg(qc); +} +EXPORT_SYMBOL_GPL(ata_bmdma_qc_prep); + +/** + * ata_bmdma_dumb_qc_prep - Prepare taskfile for submission + * @qc: Metadata associated with taskfile to be prepared + * + * Prepare ATA taskfile for submission. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_bmdma_dumb_qc_prep(struct ata_queued_cmd *qc) +{ + if (!(qc->flags & ATA_QCFLAG_DMAMAP)) + return; + + ata_bmdma_fill_sg_dumb(qc); +} +EXPORT_SYMBOL_GPL(ata_bmdma_dumb_qc_prep); + +/** + * ata_bmdma_qc_issue - issue taskfile to a BMDMA controller + * @qc: command to issue to device + * + * This function issues a PIO, NODATA or DMA command to a + * SFF/BMDMA controller. PIO and NODATA are handled by + * ata_sff_qc_issue(). + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * Zero on success, AC_ERR_* mask on failure + */ +unsigned int ata_bmdma_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + + /* see ata_dma_blacklisted() */ + BUG_ON((ap->flags & ATA_FLAG_PIO_POLLING) && + qc->tf.protocol == ATAPI_PROT_DMA); + + /* defer PIO handling to sff_qc_issue */ + if (!ata_is_dma(qc->tf.protocol)) + return ata_sff_qc_issue(qc); + + /* select the device */ + ata_dev_select(ap, qc->dev->devno, 1, 0); + + /* start the command */ + switch (qc->tf.protocol) { + case ATA_PROT_DMA: + WARN_ON_ONCE(qc->tf.flags & ATA_TFLAG_POLLING); + + ap->ops->sff_tf_load(ap, &qc->tf); /* load tf registers */ + ap->ops->bmdma_setup(qc); /* set up bmdma */ + ap->ops->bmdma_start(qc); /* initiate bmdma */ + ap->hsm_task_state = HSM_ST_LAST; + break; + + case ATAPI_PROT_DMA: + WARN_ON_ONCE(qc->tf.flags & ATA_TFLAG_POLLING); + + ap->ops->sff_tf_load(ap, &qc->tf); /* load tf registers */ + ap->ops->bmdma_setup(qc); /* set up bmdma */ + ap->hsm_task_state = HSM_ST_FIRST; + + /* send cdb by polling if no cdb interrupt */ + if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR)) + ata_sff_queue_pio_task(ap, 0); + break; + + default: + WARN_ON(1); + return AC_ERR_SYSTEM; + } + + return 0; +} +EXPORT_SYMBOL_GPL(ata_bmdma_qc_issue); + +/** + * ata_bmdma_error_handler - Stock error handler for BMDMA controller + * @ap: port to handle error for + * + * Stock error handler for BMDMA controller. It can handle both + * PATA and SATA controllers. Most BMDMA controllers should be + * able to use this EH as-is or with some added handling before + * and after. + * + * LOCKING: + * Kernel thread context (may sleep) + */ +void ata_bmdma_error_handler(struct ata_port *ap) +{ + struct ata_queued_cmd *qc; + unsigned long flags; + bool thaw = false; + + qc = __ata_qc_from_tag(ap, ap->link.active_tag); + if (qc && !(qc->flags & ATA_QCFLAG_FAILED)) + qc = NULL; + + /* reset PIO HSM and stop DMA engine */ + spin_lock_irqsave(ap->lock, flags); + + if (qc && ata_is_dma(qc->tf.protocol)) { + u8 host_stat; + + host_stat = ap->ops->bmdma_status(ap); + + /* BMDMA controllers indicate host bus error by + * setting DMA_ERR bit and timing out. As it wasn't + * really a timeout event, adjust error mask and + * cancel frozen state. + */ + if (qc->err_mask == AC_ERR_TIMEOUT && (host_stat & ATA_DMA_ERR)) { + qc->err_mask = AC_ERR_HOST_BUS; + thaw = true; + } + + ap->ops->bmdma_stop(qc); + + /* if we're gonna thaw, make sure IRQ is clear */ + if (thaw) { + ap->ops->sff_check_status(ap); + ap->ops->sff_irq_clear(ap); + } + } + + spin_unlock_irqrestore(ap->lock, flags); + + if (thaw) + ata_eh_thaw_port(ap); + + ata_sff_error_handler(ap); +} +EXPORT_SYMBOL_GPL(ata_bmdma_error_handler); + +/** + * ata_bmdma_post_internal_cmd - Stock post_internal_cmd for BMDMA + * @qc: internal command to clean up + * + * LOCKING: + * Kernel thread context (may sleep) + */ +void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + unsigned long flags; + + if (ata_is_dma(qc->tf.protocol)) { + spin_lock_irqsave(ap->lock, flags); + ap->ops->bmdma_stop(qc); + spin_unlock_irqrestore(ap->lock, flags); + } +} +EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd); + +/** + * ata_bmdma_setup - Set up PCI IDE BMDMA transaction + * @qc: Info associated with this ATA transaction. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_bmdma_setup(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); + u8 dmactl; + + /* load PRD table addr. */ + mb(); /* make sure PRD table writes are visible to controller */ + iowrite32(ap->bmdma_prd_dma, ap->ioaddr.bmdma_addr + ATA_DMA_TABLE_OFS); + + /* specify data direction, triple-check start bit is clear */ + dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); + dmactl &= ~(ATA_DMA_WR | ATA_DMA_START); + if (!rw) + dmactl |= ATA_DMA_WR; + iowrite8(dmactl, ap->ioaddr.bmdma_addr + ATA_DMA_CMD); + + /* issue r/w command */ + ap->ops->sff_exec_command(ap, &qc->tf); +} +EXPORT_SYMBOL_GPL(ata_bmdma_setup); + +/** + * ata_bmdma_start - Start a PCI IDE BMDMA transaction + * @qc: Info associated with this ATA transaction. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + u8 dmactl; + + /* start host DMA transaction */ + dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); + iowrite8(dmactl | ATA_DMA_START, ap->ioaddr.bmdma_addr + ATA_DMA_CMD); + + /* Strictly, one may wish to issue an ioread8() here, to + * flush the mmio write. However, control also passes + * to the hardware at this point, and it will interrupt + * us when we are to resume control. So, in effect, + * we don't care when the mmio write flushes. + * Further, a read of the DMA status register _immediately_ + * following the write may not be what certain flaky hardware + * is expected, so I think it is best to not add a readb() + * without first all the MMIO ATA cards/mobos. + * Or maybe I'm just being paranoid. + * + * FIXME: The posting of this write means I/O starts are + * unneccessarily delayed for MMIO + */ +} +EXPORT_SYMBOL_GPL(ata_bmdma_start); + +/** + * ata_bmdma_stop - Stop PCI IDE BMDMA transfer + * @qc: Command we are ending DMA for + * + * Clears the ATA_DMA_START flag in the dma control register + * + * May be used as the bmdma_stop() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +void ata_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *mmio = ap->ioaddr.bmdma_addr; + + /* clear start/stop bit */ + iowrite8(ioread8(mmio + ATA_DMA_CMD) & ~ATA_DMA_START, + mmio + ATA_DMA_CMD); + + /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ + ata_sff_dma_pause(ap); +} +EXPORT_SYMBOL_GPL(ata_bmdma_stop); + +/** + * ata_bmdma_status - Read PCI IDE BMDMA status + * @ap: Port associated with this ATA transaction. + * + * Read and return BMDMA status register. + * + * May be used as the bmdma_status() entry in ata_port_operations. + * + * LOCKING: + * spin_lock_irqsave(host lock) + */ +u8 ata_bmdma_status(struct ata_port *ap) +{ + return ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS); +} +EXPORT_SYMBOL_GPL(ata_bmdma_status); + + +/** + * ata_bmdma_port_start - Set port up for bmdma. + * @ap: Port to initialize + * + * Called just after data structures for each port are + * initialized. Allocates space for PRD table. + * + * May be used as the port_start() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ +int ata_bmdma_port_start(struct ata_port *ap) +{ + if (ap->mwdma_mask || ap->udma_mask) { + ap->bmdma_prd = + dmam_alloc_coherent(ap->host->dev, ATA_PRD_TBL_SZ, + &ap->bmdma_prd_dma, GFP_KERNEL); + if (!ap->bmdma_prd) + return -ENOMEM; + } + + return 0; +} +EXPORT_SYMBOL_GPL(ata_bmdma_port_start); + +/** + * ata_bmdma_port_start32 - Set port up for dma. + * @ap: Port to initialize + * + * Called just after data structures for each port are + * initialized. Enables 32bit PIO and allocates space for PRD + * table. + * + * May be used as the port_start() entry in ata_port_operations for + * devices that are capable of 32bit PIO. + * + * LOCKING: + * Inherited from caller. + */ +int ata_bmdma_port_start32(struct ata_port *ap) +{ + ap->pflags |= ATA_PFLAG_PIO32 | ATA_PFLAG_PIO32CHANGE; + return ata_bmdma_port_start(ap); +} +EXPORT_SYMBOL_GPL(ata_bmdma_port_start32); + +#ifdef CONFIG_PCI + +/** + * ata_pci_bmdma_clear_simplex - attempt to kick device out of simplex + * @pdev: PCI device + * + * Some PCI ATA devices report simplex mode but in fact can be told to + * enter non simplex mode. This implements the necessary logic to + * perform the task on such devices. Calling it on other devices will + * have -undefined- behaviour. + */ +int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev) +{ + unsigned long bmdma = pci_resource_start(pdev, 4); + u8 simplex; + + if (bmdma == 0) + return -ENOENT; + + simplex = inb(bmdma + 0x02); + outb(simplex & 0x60, bmdma + 0x02); + simplex = inb(bmdma + 0x02); + if (simplex & 0x80) + return -EOPNOTSUPP; + return 0; +} +EXPORT_SYMBOL_GPL(ata_pci_bmdma_clear_simplex); + +static void ata_bmdma_nodma(struct ata_host *host, const char *reason) +{ + int i; + + dev_printk(KERN_ERR, host->dev, "BMDMA: %s, falling back to PIO\n", + reason); + + for (i = 0; i < 2; i++) { + host->ports[i]->mwdma_mask = 0; + host->ports[i]->udma_mask = 0; + } +} + +/** + * ata_pci_bmdma_init - acquire PCI BMDMA resources and init ATA host + * @host: target ATA host + * + * Acquire PCI BMDMA resources and initialize @host accordingly. + * + * LOCKING: + * Inherited from calling layer (may sleep). + */ +void ata_pci_bmdma_init(struct ata_host *host) +{ + struct device *gdev = host->dev; + struct pci_dev *pdev = to_pci_dev(gdev); + int i, rc; + + /* No BAR4 allocation: No DMA */ + if (pci_resource_start(pdev, 4) == 0) { + ata_bmdma_nodma(host, "BAR4 is zero"); + return; + } + + /* + * Some controllers require BMDMA region to be initialized + * even if DMA is not in use to clear IRQ status via + * ->sff_irq_clear method. Try to initialize bmdma_addr + * regardless of dma masks. + */ + rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + ata_bmdma_nodma(host, "failed to set dma mask"); + if (!rc) { + rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); + if (rc) + ata_bmdma_nodma(host, + "failed to set consistent dma mask"); + } + + /* request and iomap DMA region */ + rc = pcim_iomap_regions(pdev, 1 << 4, dev_driver_string(gdev)); + if (rc) { + ata_bmdma_nodma(host, "failed to request/iomap BAR4"); + return; + } + host->iomap = pcim_iomap_table(pdev); + + for (i = 0; i < 2; i++) { + struct ata_port *ap = host->ports[i]; + void __iomem *bmdma = host->iomap[4] + 8 * i; + + if (ata_port_is_dummy(ap)) + continue; + + ap->ioaddr.bmdma_addr = bmdma; + if ((!(ap->flags & ATA_FLAG_IGN_SIMPLEX)) && + (ioread8(bmdma + 2) & 0x80)) + host->flags |= ATA_HOST_SIMPLEX; + + ata_port_desc(ap, "bmdma 0x%llx", + (unsigned long long)pci_resource_start(pdev, 4) + 8 * i); + } +} +EXPORT_SYMBOL_GPL(ata_pci_bmdma_init); + +#endif /* CONFIG_PCI */ + +/** + * ata_sff_port_init - Initialize SFF/BMDMA ATA port + * @ap: Port to initialize + * + * Called on port allocation to initialize SFF/BMDMA specific + * fields. + * + * LOCKING: + * None. + */ +void ata_sff_port_init(struct ata_port *ap) +{ + INIT_DELAYED_WORK(&ap->sff_pio_task, ata_sff_pio_task); + ap->ctl = ATA_DEVCTL_OBS; + ap->last_ctl = 0xFF; +} + +int __init ata_sff_init(void) +{ + /* + * FIXME: In UP case, there is only one workqueue thread and if you + * have more than one PIO device, latency is bloody awful, with + * occasional multi-second "hiccups" as one PIO device waits for + * another. It's an ugly wart that users DO occasionally complain + * about; luckily most users have at most one PIO polled device. + */ + ata_sff_wq = create_workqueue("ata_sff"); + if (!ata_sff_wq) + return -ENOMEM; + + return 0; +} + +void __exit ata_sff_exit(void) +{ + destroy_workqueue(ata_sff_wq); +} |