summaryrefslogtreecommitdiff
path: root/drivers/ata/pata_ali.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata/pata_ali.c')
-rw-r--r--drivers/ata/pata_ali.c141
1 files changed, 86 insertions, 55 deletions
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 1d695df..c5d61d1 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -34,7 +34,7 @@
#include <linux/dmi.h>
#define DRV_NAME "pata_ali"
-#define DRV_VERSION "0.6.6"
+#define DRV_VERSION "0.7.2"
/*
* Cable special cases
@@ -78,7 +78,7 @@ static int ali_c2_cable_detect(struct ata_port *ap)
implement the detect logic */
if (ali_cable_override(pdev))
- return ATA_CBL_PATA80;
+ return ATA_CBL_PATA40_SHORT;
/* Host view cable detect 0x4A bit 0 primary bit 1 secondary
Bit set for 40 pin */
@@ -337,16 +337,16 @@ static struct scsi_host_template ali_sht = {
.can_queue = ATA_DEF_QUEUE,
.this_id = ATA_SHT_THIS_ID,
.sg_tablesize = LIBATA_MAX_PRD,
- /* Keep LBA28 counts so large I/O's don't turn LBA48 and PIO
- with older controllers. Not locked so will grow on C5 or later */
- .max_sectors = 255,
.cmd_per_lun = ATA_SHT_CMD_PER_LUN,
.emulated = ATA_SHT_EMULATED,
.use_clustering = ATA_SHT_USE_CLUSTERING,
.proc_name = DRV_NAME,
.dma_boundary = ATA_DMA_BOUNDARY,
.slave_configure = ata_scsi_slave_config,
+ .slave_destroy = ata_scsi_slave_destroy,
.bios_param = ata_std_bios_param,
+ .resume = ata_scsi_device_resume,
+ .suspend = ata_scsi_device_suspend,
};
/*
@@ -496,6 +496,69 @@ static struct ata_port_operations ali_c5_port_ops = {
.host_stop = ata_host_stop
};
+
+/**
+ * ali_init_chipset - chip setup function
+ * @pdev: PCI device of ATA controller
+ *
+ * Perform the setup on the device that must be done both at boot
+ * and at resume time.
+ */
+
+static void ali_init_chipset(struct pci_dev *pdev)
+{
+ u8 rev, tmp;
+ struct pci_dev *north, *isa_bridge;
+
+ pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
+
+ /*
+ * The chipset revision selects the driver operations and
+ * mode data.
+ */
+
+ if (rev >= 0x20 && rev < 0xC2) {
+ /* 1543-E/F, 1543C-C, 1543C-D, 1543C-E */
+ pci_read_config_byte(pdev, 0x4B, &tmp);
+ /* Clear CD-ROM DMA write bit */
+ tmp &= 0x7F;
+ pci_write_config_byte(pdev, 0x4B, tmp);
+ } else if (rev >= 0xC2) {
+ /* Enable cable detection logic */
+ pci_read_config_byte(pdev, 0x4B, &tmp);
+ pci_write_config_byte(pdev, 0x4B, tmp | 0x08);
+ }
+ north = pci_get_bus_and_slot(0, PCI_DEVFN(0,0));
+ isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
+
+ if (north && north->vendor == PCI_VENDOR_ID_AL && isa_bridge) {
+ /* Configure the ALi bridge logic. For non ALi rely on BIOS.
+ Set the south bridge enable bit */
+ pci_read_config_byte(isa_bridge, 0x79, &tmp);
+ if (rev == 0xC2)
+ pci_write_config_byte(isa_bridge, 0x79, tmp | 0x04);
+ else if (rev > 0xC2 && rev < 0xC5)
+ pci_write_config_byte(isa_bridge, 0x79, tmp | 0x02);
+ }
+ if (rev >= 0x20) {
+ /*
+ * CD_ROM DMA on (0x53 bit 0). Enable this even if we want
+ * to use PIO. 0x53 bit 1 (rev 20 only) - enable FIFO control
+ * via 0x54/55.
+ */
+ pci_read_config_byte(pdev, 0x53, &tmp);
+ if (rev <= 0x20)
+ tmp &= ~0x02;
+ if (rev >= 0xc7)
+ tmp |= 0x03;
+ else
+ tmp |= 0x01; /* CD_ROM enable for DMA */
+ pci_write_config_byte(pdev, 0x53, tmp);
+ }
+ pci_dev_put(isa_bridge);
+ pci_dev_put(north);
+ ata_pci_clear_simplex(pdev);
+}
/**
* ali_init_one - discovery callback
* @pdev: PCI device ID
@@ -569,7 +632,7 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
static struct ata_port_info *port_info[2];
u8 rev, tmp;
- struct pci_dev *north, *isa_bridge;
+ struct pci_dev *isa_bridge;
pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
@@ -581,11 +644,6 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
if (rev < 0x20) {
port_info[0] = port_info[1] = &info_early;
} else if (rev < 0xC2) {
- /* 1543-E/F, 1543C-C, 1543C-D, 1543C-E */
- pci_read_config_byte(pdev, 0x4B, &tmp);
- /* Clear CD-ROM DMA write bit */
- tmp &= 0x7F;
- pci_write_config_byte(pdev, 0x4B, tmp);
port_info[0] = port_info[1] = &info_20;
} else if (rev == 0xC2) {
port_info[0] = port_info[1] = &info_c2;
@@ -596,54 +654,25 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
} else
port_info[0] = port_info[1] = &info_c5;
- if (rev >= 0xC2) {
- /* Enable cable detection logic */
- pci_read_config_byte(pdev, 0x4B, &tmp);
- pci_write_config_byte(pdev, 0x4B, tmp | 0x08);
- }
-
- north = pci_get_slot(pdev->bus, PCI_DEVFN(0,0));
+ ali_init_chipset(pdev);
+
isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
-
- if (north && north->vendor == PCI_VENDOR_ID_AL) {
- /* Configure the ALi bridge logic. For non ALi rely on BIOS.
- Set the south bridge enable bit */
- pci_read_config_byte(isa_bridge, 0x79, &tmp);
- if (rev == 0xC2)
- pci_write_config_byte(isa_bridge, 0x79, tmp | 0x04);
- else if (rev > 0xC2)
- pci_write_config_byte(isa_bridge, 0x79, tmp | 0x02);
- }
-
- if (rev >= 0x20) {
- if (rev < 0xC2) {
- /* Are we paired with a UDMA capable chip */
- pci_read_config_byte(isa_bridge, 0x5E, &tmp);
- if ((tmp & 0x1E) == 0x12)
- port_info[0] = port_info[1] = &info_20_udma;
- }
- /*
- * CD_ROM DMA on (0x53 bit 0). Enable this even if we want
- * to use PIO. 0x53 bit 1 (rev 20 only) - enable FIFO control
- * via 0x54/55.
- */
- pci_read_config_byte(pdev, 0x53, &tmp);
- if (rev <= 0x20)
- tmp &= ~0x02;
- if (rev >= 0xc7)
- tmp |= 0x03;
- else
- tmp |= 0x01; /* CD_ROM enable for DMA */
- pci_write_config_byte(pdev, 0x53, tmp);
+ if (isa_bridge && rev >= 0x20 && rev < 0xC2) {
+ /* Are we paired with a UDMA capable chip */
+ pci_read_config_byte(isa_bridge, 0x5E, &tmp);
+ if ((tmp & 0x1E) == 0x12)
+ port_info[0] = port_info[1] = &info_20_udma;
+ pci_dev_put(isa_bridge);
}
-
- pci_dev_put(isa_bridge);
- pci_dev_put(north);
-
- ata_pci_clear_simplex(pdev);
return ata_pci_init_one(pdev, port_info, 2);
}
+static int ali_reinit_one(struct pci_dev *pdev)
+{
+ ali_init_chipset(pdev);
+ return ata_pci_device_resume(pdev);
+}
+
static const struct pci_device_id ali[] = {
{ PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5228), },
{ PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5229), },
@@ -655,7 +684,9 @@ static struct pci_driver ali_pci_driver = {
.name = DRV_NAME,
.id_table = ali,
.probe = ali_init_one,
- .remove = ata_pci_remove_one
+ .remove = ata_pci_remove_one,
+ .suspend = ata_pci_device_suspend,
+ .resume = ali_reinit_one,
};
static int __init ali_init(void)
generated by cgit v0.10.2 at 2024-11-03 14:52:26 (GMT)