diff options
Diffstat (limited to 'drivers/char')
52 files changed, 3059 insertions, 251 deletions
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 0e6f35f..ad8b537 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -409,14 +409,6 @@ config SGI_MBCS If you have an SGI Altix with an attached SABrick say Y or M here, otherwise say N. -config MSPEC - tristate "Memory special operations driver" - depends on IA64 - help - If you have an ia64 and you want to enable memory special - operations support (formerly known as fetchop), say Y here, - otherwise say N. - source "drivers/serial/Kconfig" config UNIX98_PTYS @@ -1002,7 +994,7 @@ config HPET help If you say Y here, you will have a miscdevice named "/dev/hpet/". Each open selects one of the timers supported by the HPET. The timers are - non-periodioc and/or periodic. + non-periodic and/or periodic. config HPET_RTC_IRQ bool "HPET Control RTC IRQ" if !HPET_EMULATE_RTC @@ -1046,7 +1038,7 @@ source "drivers/char/tpm/Kconfig" config TELCLOCK tristate "Telecom clock driver for MPBL0010 ATCA SBC" - depends on EXPERIMENTAL + depends on EXPERIMENTAL && X86 default n help The telecom clock device is specific to the MPBL0010 ATCA computer and diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c index c392001..5ff457b 100644 --- a/drivers/char/agp/generic.c +++ b/drivers/char/agp/generic.c @@ -1054,7 +1054,7 @@ void *agp_generic_alloc_page(struct agp_bridge_data *bridge) { struct page * page; - page = alloc_page(GFP_KERNEL); + page = alloc_page(GFP_KERNEL | GFP_DMA32); if (page == NULL) return NULL; diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index d1ede7d..555b3a8 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -169,7 +169,7 @@ static void *i8xx_alloc_pages(void) { struct page * page; - page = alloc_pages(GFP_KERNEL, 2); + page = alloc_pages(GFP_KERNEL | GFP_DMA32, 2); if (page == NULL) return NULL; @@ -387,11 +387,7 @@ static void intel_i830_init_gtt_entries(void) /* We obtain the size of the GTT, which is also stored (for some * reason) at the top of stolen memory. Then we add 4KB to that * for the video BIOS popup, which is also stored in there. */ - - if (IS_I965) - size = 512 + 4; - else - size = agp_bridge->driver->fetch_size() + 4; + size = agp_bridge->driver->fetch_size() + 4; if (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82830_HB || agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_82845G_HB) { @@ -805,6 +801,26 @@ static int intel_i915_create_gatt_table(struct agp_bridge_data *bridge) return 0; } + +/* + * The i965 supports 36-bit physical addresses, but to keep + * the format of the GTT the same, the bits that don't fit + * in a 32-bit word are shifted down to bits 4..7. + * + * Gcc is smart enough to notice that "(addr >> 28) & 0xf0" + * is always zero on 32-bit architectures, so no need to make + * this conditional. + */ +static unsigned long intel_i965_mask_memory(struct agp_bridge_data *bridge, + unsigned long addr, int type) +{ + /* Shift high bits down */ + addr |= (addr >> 28) & 0xf0; + + /* Type checking must be done elsewhere */ + return addr | bridge->driver->masks[type].mask; +} + static int intel_i965_fetch_size(void) { struct aper_size_info_fixed *values; @@ -832,7 +848,8 @@ static int intel_i965_fetch_size(void) agp_bridge->previous_size = agp_bridge->current_size = (void *)(values + offset); - return values[offset].size; + /* The i965 GTT is always sized as if it had a 512kB aperture size */ + return 512; } /* The intel i965 automatically initializes the agp aperture during POST. @@ -1584,7 +1601,7 @@ static struct agp_bridge_driver intel_i965_driver = { .fetch_size = intel_i965_fetch_size, .cleanup = intel_i915_cleanup, .tlb_flush = intel_i810_tlbflush, - .mask_memory = intel_i810_mask_memory, + .mask_memory = intel_i965_mask_memory, .masks = intel_i810_masks, .agp_enable = intel_i810_agp_enable, .cache_flush = global_cache_flush, diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c index 91b71e7..dffc193 100644 --- a/drivers/char/agp/uninorth-agp.c +++ b/drivers/char/agp/uninorth-agp.c @@ -27,32 +27,42 @@ static int uninorth_rev; static int is_u3; +static char __devinitdata *aperture = NULL; static int uninorth_fetch_size(void) { - int i; - u32 temp; - struct aper_size_info_32 *values; - - pci_read_config_dword(agp_bridge->dev, UNI_N_CFG_GART_BASE, &temp); - temp &= ~(0xfffff000); - values = A_SIZE_32(agp_bridge->driver->aperture_sizes); - - for (i = 0; i < agp_bridge->driver->num_aperture_sizes; i++) { - if (temp == values[i].size_value) { - agp_bridge->previous_size = - agp_bridge->current_size = (void *) (values + i); - agp_bridge->aperture_size_idx = i; - return values[i].size; + int i, size = 0; + struct aper_size_info_32 *values = + A_SIZE_32(agp_bridge->driver->aperture_sizes); + + if (aperture) { + char *save = aperture; + + size = memparse(aperture, &aperture) >> 20; + aperture = save; + + for (i = 0; i < agp_bridge->driver->num_aperture_sizes; i++) + if (size == values[i].size) + break; + + if (i == agp_bridge->driver->num_aperture_sizes) { + printk(KERN_ERR PFX "Invalid aperture size, using" + " default\n"); + size = 0; + aperture = NULL; } } - agp_bridge->previous_size = - agp_bridge->current_size = (void *) (values + 1); - agp_bridge->aperture_size_idx = 1; - return values[1].size; + if (!size) { + for (i = 0; i < agp_bridge->driver->num_aperture_sizes; i++) + if (values[i].size == 32) + break; + } - return 0; + agp_bridge->previous_size = + agp_bridge->current_size = (void *)(values + i); + agp_bridge->aperture_size_idx = i; + return values[i].size; } static void uninorth_tlbflush(struct agp_memory *mem) @@ -683,5 +693,11 @@ static void __exit agp_uninorth_cleanup(void) module_init(agp_uninorth_init); module_exit(agp_uninorth_cleanup); +module_param(aperture, charp, 0); +MODULE_PARM_DESC(aperture, + "Aperture size, must be power of two between 4MB and an\n" + "\t\tupper limit specific to the UniNorth revision.\n" + "\t\tDefault: 32M"); + MODULE_AUTHOR("Ben Herrenschmidt & Paul Mackerras"); MODULE_LICENSE("GPL"); diff --git a/drivers/char/drm/drm_bufs.c b/drivers/char/drm/drm_bufs.c index 029baea..6eafff1 100644 --- a/drivers/char/drm/drm_bufs.c +++ b/drivers/char/drm/drm_bufs.c @@ -237,6 +237,8 @@ static int drm_addmap_core(drm_device_t * dev, unsigned int offset, list = drm_alloc(sizeof(*list), DRM_MEM_MAPS); if (!list) { + if (map->type == _DRM_REGISTERS) + drm_ioremapfree(map->handle, map->size, dev); drm_free(map, sizeof(*map), DRM_MEM_MAPS); return -EINVAL; } @@ -252,6 +254,8 @@ static int drm_addmap_core(drm_device_t * dev, unsigned int offset, map->offset; ret = drm_map_handle(dev, &list->hash, user_token, 0); if (ret) { + if (map->type == _DRM_REGISTERS) + drm_ioremapfree(map->handle, map->size, dev); drm_free(map, sizeof(*map), DRM_MEM_MAPS); drm_free(list, sizeof(*list), DRM_MEM_MAPS); mutex_unlock(&dev->struct_mutex); diff --git a/drivers/char/drm/drm_sysfs.c b/drivers/char/drm/drm_sysfs.c index 51ad98c..ba4b8de 100644 --- a/drivers/char/drm/drm_sysfs.c +++ b/drivers/char/drm/drm_sysfs.c @@ -42,13 +42,24 @@ static CLASS_ATTR(version, S_IRUGO, version_show, NULL); struct class *drm_sysfs_create(struct module *owner, char *name) { struct class *class; + int err; class = class_create(owner, name); - if (!class) - return class; + if (!class) { + err = -ENOMEM; + goto err_out; + } + + err = class_create_file(class, &class_attr_version); + if (err) + goto err_out_class; - class_create_file(class, &class_attr_version); return class; + +err_out_class: + class_destroy(class); +err_out: + return ERR_PTR(err); } /** @@ -96,20 +107,36 @@ static struct class_device_attribute class_device_attrs[] = { struct class_device *drm_sysfs_device_add(struct class *cs, drm_head_t *head) { struct class_device *class_dev; - int i; + int i, j, err; class_dev = class_device_create(cs, NULL, MKDEV(DRM_MAJOR, head->minor), &(head->dev->pdev)->dev, "card%d", head->minor); - if (!class_dev) - return NULL; + if (!class_dev) { + err = -ENOMEM; + goto err_out; + } class_set_devdata(class_dev, head); - for (i = 0; i < ARRAY_SIZE(class_device_attrs); i++) - class_device_create_file(class_dev, &class_device_attrs[i]); + for (i = 0; i < ARRAY_SIZE(class_device_attrs); i++) { + err = class_device_create_file(class_dev, + &class_device_attrs[i]); + if (err) + goto err_out_files; + } + return class_dev; + +err_out_files: + if (i > 0) + for (j = 0; j < i; j++) + class_device_remove_file(class_dev, + &class_device_attrs[i]); + class_device_unregister(class_dev); +err_out: + return ERR_PTR(err); } /** diff --git a/drivers/char/drm/mga_drv.c b/drivers/char/drm/mga_drv.c index e30f556..be49dbb 100644 --- a/drivers/char/drm/mga_drv.c +++ b/drivers/char/drm/mga_drv.c @@ -47,6 +47,7 @@ static struct drm_driver driver = { DRIVER_USE_AGP | DRIVER_USE_MTRR | DRIVER_PCI_DMA | DRIVER_HAVE_DMA | DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_IRQ_VBL, + .dev_priv_size = sizeof(drm_mga_buf_priv_t), .load = mga_driver_load, .unload = mga_driver_unload, .lastclose = mga_driver_lastclose, diff --git a/drivers/char/drm/r300_cmdbuf.c b/drivers/char/drm/r300_cmdbuf.c index 26bdf2c..d14477b 100644 --- a/drivers/char/drm/r300_cmdbuf.c +++ b/drivers/char/drm/r300_cmdbuf.c @@ -538,6 +538,36 @@ static __inline__ int r300_emit_bitblt_multi(drm_radeon_private_t *dev_priv, return 0; } +static __inline__ int r300_emit_indx_buffer(drm_radeon_private_t *dev_priv, + drm_radeon_kcmd_buffer_t *cmdbuf) +{ + u32 *cmd = (u32 *) cmdbuf->buf; + int count, ret; + RING_LOCALS; + + count=(cmd[0]>>16) & 0x3fff; + + if ((cmd[1] & 0x8000ffff) != 0x80000810) { + DRM_ERROR("Invalid indx_buffer reg address %08X\n", cmd[1]); + return DRM_ERR(EINVAL); + } + ret = r300_check_offset(dev_priv, cmd[2]); + if (ret) { + DRM_ERROR("Invalid indx_buffer offset is %08X\n", cmd[2]); + return DRM_ERR(EINVAL); + } + + BEGIN_RING(count+2); + OUT_RING(cmd[0]); + OUT_RING_TABLE((int *)(cmdbuf->buf + 4), count + 1); + ADVANCE_RING(); + + cmdbuf->buf += (count+2)*4; + cmdbuf->bufsz -= (count+2)*4; + + return 0; +} + static __inline__ int r300_emit_raw_packet3(drm_radeon_private_t *dev_priv, drm_radeon_kcmd_buffer_t *cmdbuf) { @@ -578,10 +608,11 @@ static __inline__ int r300_emit_raw_packet3(drm_radeon_private_t *dev_priv, case RADEON_CNTL_BITBLT_MULTI: return r300_emit_bitblt_multi(dev_priv, cmdbuf); + case RADEON_CP_INDX_BUFFER: /* DRAW_INDX_2 without INDX_BUFFER seems to lock up the gpu */ + return r300_emit_indx_buffer(dev_priv, cmdbuf); case RADEON_CP_3D_DRAW_IMMD_2: /* triggers drawing using in-packet vertex data */ case RADEON_CP_3D_DRAW_VBUF_2: /* triggers drawing of vertex buffers setup elsewhere */ case RADEON_CP_3D_DRAW_INDX_2: /* triggers drawing using indices to vertex buffer */ - case RADEON_CP_INDX_BUFFER: /* DRAW_INDX_2 without INDX_BUFFER seems to lock up the gpu */ case RADEON_WAIT_FOR_IDLE: case RADEON_CP_NOP: /* these packets are safe */ diff --git a/drivers/char/drm/radeon_state.c b/drivers/char/drm/radeon_state.c index feac5f0..6e04fdd 100644 --- a/drivers/char/drm/radeon_state.c +++ b/drivers/char/drm/radeon_state.c @@ -275,6 +275,8 @@ static __inline__ int radeon_check_and_fixup_packet3(drm_radeon_private_t * unsigned int *cmdsz) { u32 *cmd = (u32 *) cmdbuf->buf; + u32 offset, narrays; + int count, i, k; *cmdsz = 2 + ((cmd[0] & RADEON_CP_PACKET_COUNT_MASK) >> 16); @@ -288,10 +290,106 @@ static __inline__ int radeon_check_and_fixup_packet3(drm_radeon_private_t * return DRM_ERR(EINVAL); } - /* Check client state and fix it up if necessary */ - if (cmd[0] & 0x8000) { /* MSB of opcode: next DWORD GUI_CNTL */ - u32 offset; + switch(cmd[0] & 0xff00) { + /* XXX Are there old drivers needing other packets? */ + case RADEON_3D_DRAW_IMMD: + case RADEON_3D_DRAW_VBUF: + case RADEON_3D_DRAW_INDX: + case RADEON_WAIT_FOR_IDLE: + case RADEON_CP_NOP: + case RADEON_3D_CLEAR_ZMASK: +/* case RADEON_CP_NEXT_CHAR: + case RADEON_CP_PLY_NEXTSCAN: + case RADEON_CP_SET_SCISSORS: */ /* probably safe but will never need them? */ + /* these packets are safe */ + break; + + case RADEON_CP_3D_DRAW_IMMD_2: + case RADEON_CP_3D_DRAW_VBUF_2: + case RADEON_CP_3D_DRAW_INDX_2: + case RADEON_3D_CLEAR_HIZ: + /* safe but r200 only */ + if (dev_priv->microcode_version != UCODE_R200) { + DRM_ERROR("Invalid 3d packet for r100-class chip\n"); + return DRM_ERR(EINVAL); + } + break; + + case RADEON_3D_LOAD_VBPNTR: + count = (cmd[0] >> 16) & 0x3fff; + + if (count > 18) { /* 12 arrays max */ + DRM_ERROR("Too large payload in 3D_LOAD_VBPNTR (count=%d)\n", + count); + return DRM_ERR(EINVAL); + } + + /* carefully check packet contents */ + narrays = cmd[1] & ~0xc000; + k = 0; + i = 2; + while ((k < narrays) && (i < (count + 2))) { + i++; /* skip attribute field */ + if (radeon_check_and_fixup_offset(dev_priv, filp_priv, &cmd[i])) { + DRM_ERROR + ("Invalid offset (k=%d i=%d) in 3D_LOAD_VBPNTR packet.\n", + k, i); + return DRM_ERR(EINVAL); + } + k++; + i++; + if (k == narrays) + break; + /* have one more to process, they come in pairs */ + if (radeon_check_and_fixup_offset(dev_priv, filp_priv, &cmd[i])) { + DRM_ERROR + ("Invalid offset (k=%d i=%d) in 3D_LOAD_VBPNTR packet.\n", + k, i); + return DRM_ERR(EINVAL); + } + k++; + i++; + } + /* do the counts match what we expect ? */ + if ((k != narrays) || (i != (count + 2))) { + DRM_ERROR + ("Malformed 3D_LOAD_VBPNTR packet (k=%d i=%d narrays=%d count+1=%d).\n", + k, i, narrays, count + 1); + return DRM_ERR(EINVAL); + } + break; + + case RADEON_3D_RNDR_GEN_INDX_PRIM: + if (dev_priv->microcode_version != UCODE_R100) { + DRM_ERROR("Invalid 3d packet for r200-class chip\n"); + return DRM_ERR(EINVAL); + } + if (radeon_check_and_fixup_offset(dev_priv, filp_priv, &cmd[1])) { + DRM_ERROR("Invalid rndr_gen_indx offset\n"); + return DRM_ERR(EINVAL); + } + break; + + case RADEON_CP_INDX_BUFFER: + if (dev_priv->microcode_version != UCODE_R200) { + DRM_ERROR("Invalid 3d packet for r100-class chip\n"); + return DRM_ERR(EINVAL); + } + if ((cmd[1] & 0x8000ffff) != 0x80000810) { + DRM_ERROR("Invalid indx_buffer reg address %08X\n", cmd[1]); + return DRM_ERR(EINVAL); + } + if (radeon_check_and_fixup_offset(dev_priv, filp_priv, &cmd[2])) { + DRM_ERROR("Invalid indx_buffer offset is %08X\n", cmd[2]); + return DRM_ERR(EINVAL); + } + break; + + case RADEON_CNTL_HOSTDATA_BLT: + case RADEON_CNTL_PAINT_MULTI: + case RADEON_CNTL_BITBLT_MULTI: + /* MSB of opcode: next DWORD GUI_CNTL */ if (cmd[1] & (RADEON_GMC_SRC_PITCH_OFFSET_CNTL | RADEON_GMC_DST_PITCH_OFFSET_CNTL)) { offset = cmd[2] << 10; @@ -313,6 +411,11 @@ static __inline__ int radeon_check_and_fixup_packet3(drm_radeon_private_t * } cmd[3] = (cmd[3] & 0xffc00000) | offset >> 10; } + break; + + default: + DRM_ERROR("Invalid packet type %x\n", cmd[0] & 0xff00); + return DRM_ERR(EINVAL); } return 0; diff --git a/drivers/char/drm/savage_bci.c b/drivers/char/drm/savage_bci.c index 59c7520..a9a84f8 100644 --- a/drivers/char/drm/savage_bci.c +++ b/drivers/char/drm/savage_bci.c @@ -728,6 +728,7 @@ static int savage_do_init_bci(drm_device_t * dev, drm_savage_init_t * init) dev_priv->status = NULL; } if (dev_priv->dma_type == SAVAGE_DMA_AGP && init->buffers_offset) { + dev->agp_buffer_token = init->buffers_offset; dev->agp_buffer_map = drm_core_findmap(dev, init->buffers_offset); if (!dev->agp_buffer_map) { diff --git a/drivers/char/drm/savage_state.c b/drivers/char/drm/savage_state.c index ef2581d..1ca1e9c 100644 --- a/drivers/char/drm/savage_state.c +++ b/drivers/char/drm/savage_state.c @@ -994,7 +994,7 @@ int savage_bci_cmdbuf(DRM_IOCTL_ARGS) if (cmdbuf.size) { kcmd_addr = drm_alloc(cmdbuf.size * 8, DRM_MEM_DRIVER); if (kcmd_addr == NULL) - return ENOMEM; + return DRM_ERR(ENOMEM); if (DRM_COPY_FROM_USER(kcmd_addr, cmdbuf.cmd_addr, cmdbuf.size * 8)) diff --git a/drivers/char/epca.c b/drivers/char/epca.c index c3f9558..706733c 100644 --- a/drivers/char/epca.c +++ b/drivers/char/epca.c @@ -1157,6 +1157,7 @@ static int __init pc_init(void) int crd; struct board_info *bd; unsigned char board_id = 0; + int err = -ENOMEM; int pci_boards_found, pci_count; @@ -1164,13 +1165,11 @@ static int __init pc_init(void) pc_driver = alloc_tty_driver(MAX_ALLOC); if (!pc_driver) - return -ENOMEM; + goto out1; pc_info = alloc_tty_driver(MAX_ALLOC); - if (!pc_info) { - put_tty_driver(pc_driver); - return -ENOMEM; - } + if (!pc_info) + goto out2; /* ----------------------------------------------------------------------- If epca_setup has not been ran by LILO set num_cards to defaults; copy @@ -1370,11 +1369,17 @@ static int __init pc_init(void) } /* End for each card */ - if (tty_register_driver(pc_driver)) - panic("Couldn't register Digi PC/ driver"); + err = tty_register_driver(pc_driver); + if (err) { + printk(KERN_ERR "Couldn't register Digi PC/ driver"); + goto out3; + } - if (tty_register_driver(pc_info)) - panic("Couldn't register Digi PC/ info "); + err = tty_register_driver(pc_info); + if (err) { + printk(KERN_ERR "Couldn't register Digi PC/ info "); + goto out4; + } /* ------------------------------------------------------------------- Start up the poller to check for events on all enabled boards @@ -1385,6 +1390,15 @@ static int __init pc_init(void) mod_timer(&epca_timer, jiffies + HZ/25); return 0; +out4: + tty_unregister_driver(pc_driver); +out3: + put_tty_driver(pc_info); +out2: + put_tty_driver(pc_driver); +out1: + return err; + } /* End pc_init */ /* ------------------ Begin post_fep_init ---------------------- */ diff --git a/drivers/char/ftape/zftape/zftape-buffers.c b/drivers/char/ftape/zftape/zftape-buffers.c index da06f13..7ebce2e 100644 --- a/drivers/char/ftape/zftape/zftape-buffers.c +++ b/drivers/char/ftape/zftape/zftape-buffers.c @@ -85,7 +85,7 @@ int zft_vmalloc_once(void *new, size_t size) peak_memory = used_memory; } TRACE_ABORT(0, ft_t_noise, - "allocated buffer @ %p, %d bytes", *(void **)new, size); + "allocated buffer @ %p, %zd bytes", *(void **)new, size); } int zft_vmalloc_always(void *new, size_t size) { @@ -101,7 +101,7 @@ void zft_vfree(void *old, size_t size) if (*(void **)old) { vfree(*(void **)old); used_memory -= size; - TRACE(ft_t_noise, "released buffer @ %p, %d bytes", + TRACE(ft_t_noise, "released buffer @ %p, %zd bytes", *(void **)old, size); *(void **)old = NULL; } diff --git a/drivers/char/hw_random/core.c b/drivers/char/hw_random/core.c index 154a81d..ebace20 100644 --- a/drivers/char/hw_random/core.c +++ b/drivers/char/hw_random/core.c @@ -162,7 +162,8 @@ static struct miscdevice rng_miscdev = { }; -static ssize_t hwrng_attr_current_store(struct class_device *class, +static ssize_t hwrng_attr_current_store(struct device *dev, + struct device_attribute *attr, const char *buf, size_t len) { int err; @@ -192,7 +193,8 @@ static ssize_t hwrng_attr_current_store(struct class_device *class, return err ? : len; } -static ssize_t hwrng_attr_current_show(struct class_device *class, +static ssize_t hwrng_attr_current_show(struct device *dev, + struct device_attribute *attr, char *buf) { int err; @@ -210,7 +212,8 @@ static ssize_t hwrng_attr_current_show(struct class_device *class, return ret; } -static ssize_t hwrng_attr_available_show(struct class_device *class, +static ssize_t hwrng_attr_available_show(struct device *dev, + struct device_attribute *attr, char *buf) { int err; @@ -234,20 +237,18 @@ static ssize_t hwrng_attr_available_show(struct class_device *class, return ret; } -static CLASS_DEVICE_ATTR(rng_current, S_IRUGO | S_IWUSR, - hwrng_attr_current_show, - hwrng_attr_current_store); -static CLASS_DEVICE_ATTR(rng_available, S_IRUGO, - hwrng_attr_available_show, - NULL); +static DEVICE_ATTR(rng_current, S_IRUGO | S_IWUSR, + hwrng_attr_current_show, + hwrng_attr_current_store); +static DEVICE_ATTR(rng_available, S_IRUGO, + hwrng_attr_available_show, + NULL); static void unregister_miscdev(void) { - class_device_remove_file(rng_miscdev.class, - &class_device_attr_rng_available); - class_device_remove_file(rng_miscdev.class, - &class_device_attr_rng_current); + device_remove_file(rng_miscdev.this_device, &dev_attr_rng_available); + device_remove_file(rng_miscdev.this_device, &dev_attr_rng_current); misc_deregister(&rng_miscdev); } @@ -258,20 +259,19 @@ static int register_miscdev(void) err = misc_register(&rng_miscdev); if (err) goto out; - err = class_device_create_file(rng_miscdev.class, - &class_device_attr_rng_current); + err = device_create_file(rng_miscdev.this_device, + &dev_attr_rng_current); if (err) goto err_misc_dereg; - err = class_device_create_file(rng_miscdev.class, - &class_device_attr_rng_available); + err = device_create_file(rng_miscdev.this_device, + &dev_attr_rng_available); if (err) goto err_remove_current; out: return err; err_remove_current: - class_device_remove_file(rng_miscdev.class, - &class_device_attr_rng_current); + device_remove_file(rng_miscdev.this_device, &dev_attr_rng_current); err_misc_dereg: misc_deregister(&rng_miscdev); goto out; diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index 34a4fd1..c47add8 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -376,13 +376,23 @@ static void free_recv_msg_list(struct list_head *q) } } +static void free_smi_msg_list(struct list_head *q) +{ + struct ipmi_smi_msg *msg, *msg2; + + list_for_each_entry_safe(msg, msg2, q, link) { + list_del(&msg->link); + ipmi_free_smi_msg(msg); + } +} + static void clean_up_interface_data(ipmi_smi_t intf) { int i; struct cmd_rcvr *rcvr, *rcvr2; struct list_head list; - free_recv_msg_list(&intf->waiting_msgs); + free_smi_msg_list(&intf->waiting_msgs); free_recv_msg_list(&intf->waiting_events); /* Wholesale remove all the entries from the list in the @@ -1844,7 +1854,7 @@ static ssize_t provides_dev_sdrs_show(struct device *dev, struct bmc_device *bmc = dev_get_drvdata(dev); return snprintf(buf, 10, "%u\n", - bmc->id.device_revision && 0x80 >> 7); + (bmc->id.device_revision & 0x80) >> 7); } static ssize_t revision_show(struct device *dev, struct device_attribute *attr, @@ -1853,7 +1863,7 @@ static ssize_t revision_show(struct device *dev, struct device_attribute *attr, struct bmc_device *bmc = dev_get_drvdata(dev); return snprintf(buf, 20, "%u\n", - bmc->id.device_revision && 0x0F); + bmc->id.device_revision & 0x0F); } static ssize_t firmware_rev_show(struct device *dev, @@ -2108,7 +2118,7 @@ static int ipmi_bmc_register(ipmi_smi_t intf) dev_set_drvdata(&bmc->dev->dev, bmc); kref_init(&bmc->refcount); - rv = platform_device_register(bmc->dev); + rv = platform_device_add(bmc->dev); mutex_unlock(&ipmidriver_mutex); if (rv) { printk(KERN_ERR @@ -3232,7 +3242,9 @@ void ipmi_smi_msg_received(ipmi_smi_t intf, report the error immediately. */ if ((msg->rsp_size >= 3) && (msg->rsp[2] != 0) && (msg->rsp[2] != IPMI_NODE_BUSY_ERR) - && (msg->rsp[2] != IPMI_LOST_ARBITRATION_ERR)) + && (msg->rsp[2] != IPMI_LOST_ARBITRATION_ERR) + && (msg->rsp[2] != IPMI_BUS_ERR) + && (msg->rsp[2] != IPMI_NAK_ON_WRITE_ERR)) { int chan = msg->rsp[3] & 0xf; diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index 24825bd..bb1fac1 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -1211,7 +1211,7 @@ static void intf_mem_outb(struct si_sm_io *io, unsigned int offset, static unsigned char intf_mem_inw(struct si_sm_io *io, unsigned int offset) { return (readw((io->addr)+(offset * io->regspacing)) >> io->regshift) - && 0xff; + & 0xff; } static void intf_mem_outw(struct si_sm_io *io, unsigned int offset, @@ -1223,7 +1223,7 @@ static void intf_mem_outw(struct si_sm_io *io, unsigned int offset, static unsigned char intf_mem_inl(struct si_sm_io *io, unsigned int offset) { return (readl((io->addr)+(offset * io->regspacing)) >> io->regshift) - && 0xff; + & 0xff; } static void intf_mem_outl(struct si_sm_io *io, unsigned int offset, @@ -1236,7 +1236,7 @@ static void intf_mem_outl(struct si_sm_io *io, unsigned int offset, static unsigned char mem_inq(struct si_sm_io *io, unsigned int offset) { return (readq((io->addr)+(offset * io->regspacing)) >> io->regshift) - && 0xff; + & 0xff; } static void mem_outq(struct si_sm_io *io, unsigned int offset, @@ -1789,7 +1789,7 @@ static int __devinit ipmi_pci_probe(struct pci_dev *pdev, info = kzalloc(sizeof(*info), GFP_KERNEL); if (!info) - return ENOMEM; + return -ENOMEM; info->addr_source = "PCI"; @@ -1810,7 +1810,7 @@ static int __devinit ipmi_pci_probe(struct pci_dev *pdev, kfree(info); printk(KERN_INFO "ipmi_si: %s: Unknown IPMI type: %d\n", pci_name(pdev), class_type); - return ENOMEM; + return -ENOMEM; } rv = pci_enable_device(pdev); @@ -1867,7 +1867,7 @@ static int ipmi_pci_resume(struct pci_dev *pdev) static struct pci_device_id ipmi_pci_devices[] = { { PCI_DEVICE(PCI_HP_VENDOR_ID, PCI_MMC_DEVICE_ID) }, - { PCI_DEVICE_CLASS(PCI_ERMC_CLASSCODE, PCI_ERMC_CLASSCODE) } + { PCI_DEVICE_CLASS(PCI_ERMC_CLASSCODE, PCI_ERMC_CLASSCODE_MASK) } }; MODULE_DEVICE_TABLE(pci, ipmi_pci_devices); @@ -2346,7 +2346,7 @@ static int try_smi_init(struct smi_info *new_smi) new_smi->dev = &new_smi->pdev->dev; new_smi->dev->driver = &ipmi_driver; - rv = platform_device_register(new_smi->pdev); + rv = platform_device_add(new_smi->pdev); if (rv) { printk(KERN_ERR "ipmi_si_intf:" diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c index e9e9bf3..58c955e 100644 --- a/drivers/char/isicom.c +++ b/drivers/char/isicom.c @@ -1062,11 +1062,12 @@ static void isicom_shutdown_port(struct isi_port *port) static void isicom_close(struct tty_struct *tty, struct file *filp) { struct isi_port *port = tty->driver_data; - struct isi_board *card = port->card; + struct isi_board *card; unsigned long flags; if (!port) return; + card = port->card; if (isicom_paranoia_check(port, tty->name, "isicom_close")) return; diff --git a/drivers/char/mem.c b/drivers/char/mem.c index 5547337..e67eef4 100644 --- a/drivers/char/mem.c +++ b/drivers/char/mem.c @@ -980,10 +980,10 @@ static int __init chr_dev_init(void) mem_class = class_create(THIS_MODULE, "mem"); for (i = 0; i < ARRAY_SIZE(devlist); i++) - class_device_create(mem_class, NULL, - MKDEV(MEM_MAJOR, devlist[i].minor), - NULL, devlist[i].name); - + device_create(mem_class, NULL, + MKDEV(MEM_MAJOR, devlist[i].minor), + devlist[i].name); + return 0; } diff --git a/drivers/char/misc.c b/drivers/char/misc.c index 62ebe09..7a484fc 100644 --- a/drivers/char/misc.c +++ b/drivers/char/misc.c @@ -169,11 +169,6 @@ fail: return err; } -/* - * TODO for 2.7: - * - add a struct kref to struct miscdevice and make all usages of - * them dynamic. - */ static struct class *misc_class; static const struct file_operations misc_fops = { @@ -228,10 +223,10 @@ int misc_register(struct miscdevice * misc) misc_minors[misc->minor >> 3] |= 1 << (misc->minor & 7); dev = MKDEV(MISC_MAJOR, misc->minor); - misc->class = class_device_create(misc_class, NULL, dev, misc->dev, + misc->this_device = device_create(misc_class, misc->parent, dev, "%s", misc->name); - if (IS_ERR(misc->class)) { - err = PTR_ERR(misc->class); + if (IS_ERR(misc->this_device)) { + err = PTR_ERR(misc->this_device); goto out; } @@ -264,7 +259,7 @@ int misc_deregister(struct miscdevice * misc) down(&misc_sem); list_del(&misc->list); - class_device_destroy(misc_class, MKDEV(MISC_MAJOR, misc->minor)); + device_destroy(misc_class, MKDEV(MISC_MAJOR, misc->minor)); if (i < DYNAMIC_MINORS && i>0) { misc_minors[i>>3] &= ~(1 << (misc->minor & 7)); } diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c index b401383..96cb1f0 100644 --- a/drivers/char/moxa.c +++ b/drivers/char/moxa.c @@ -130,6 +130,7 @@ static moxa_isa_board_conf moxa_isa_boards[] = typedef struct _moxa_pci_devinfo { ushort busNum; ushort devNum; + struct pci_dev *pdev; } moxa_pci_devinfo; typedef struct _moxa_board_conf { @@ -324,6 +325,9 @@ static int moxa_get_PCI_conf(struct pci_dev *p, int board_type, moxa_board_conf board->busType = MOXA_BUS_TYPE_PCI; board->pciInfo.busNum = p->bus->number; board->pciInfo.devNum = p->devfn >> 3; + board->pciInfo.pdev = p; + /* don't lose the reference in the next pci_get_device iteration */ + pci_dev_get(p); return (0); } @@ -493,6 +497,11 @@ static void __exit moxa_exit(void) if (tty_unregister_driver(moxaDriver)) printk("Couldn't unregister MOXA Intellio family serial driver\n"); put_tty_driver(moxaDriver); + + for (i = 0; i < MAX_BOARDS; i++) + if (moxa_boards[i].busType == MOXA_BUS_TYPE_PCI) + pci_dev_put(moxa_boards[i].pciInfo.pdev); + if (verbose) printk("Done\n"); } diff --git a/drivers/char/mspec.c b/drivers/char/mspec.c index 5c0dec3..235e892 100644 --- a/drivers/char/mspec.c +++ b/drivers/char/mspec.c @@ -72,7 +72,11 @@ enum { MSPEC_UNCACHED }; +#ifdef CONFIG_SGI_SN static int is_sn2; +#else +#define is_sn2 0 +#endif /* * One of these structures is allocated when an mspec region is mmaped. The @@ -211,7 +215,7 @@ mspec_nopfn(struct vm_area_struct *vma, unsigned long address) if (vdata->type == MSPEC_FETCHOP) paddr = TO_AMO(maddr); else - paddr = __pa(TO_CAC(maddr)); + paddr = maddr & ~__IA64_UNCACHED_OFFSET; pfn = paddr >> PAGE_SHIFT; @@ -335,6 +339,7 @@ mspec_init(void) * The fetchop device only works on SN2 hardware, uncached and cached * memory drivers should both be valid on all ia64 hardware */ +#ifdef CONFIG_SGI_SN if (ia64_platform_is("sn2")) { is_sn2 = 1; if (is_shub2()) { @@ -363,6 +368,7 @@ mspec_init(void) goto free_scratch_pages; } } +#endif ret = misc_register(&cached_miscdev); if (ret) { printk(KERN_ERR "%s: failed to register device %i\n", diff --git a/drivers/char/ppdev.c b/drivers/char/ppdev.c index efc485e..c1e3dd8 100644 --- a/drivers/char/ppdev.c +++ b/drivers/char/ppdev.c @@ -752,13 +752,13 @@ static const struct file_operations pp_fops = { static void pp_attach(struct parport *port) { - class_device_create(ppdev_class, NULL, MKDEV(PP_MAJOR, port->number), - NULL, "parport%d", port->number); + device_create(ppdev_class, NULL, MKDEV(PP_MAJOR, port->number), + "parport%d", port->number); } static void pp_detach(struct parport *port) { - class_device_destroy(ppdev_class, MKDEV(PP_MAJOR, port->number)); + device_destroy(ppdev_class, MKDEV(PP_MAJOR, port->number)); } static struct parport_driver pp_driver = { diff --git a/drivers/char/random.c b/drivers/char/random.c index 07f47a0..d40df30 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -645,6 +645,7 @@ void add_input_randomness(unsigned int type, unsigned int code, add_timer_randomness(&input_timer_state, (type << 4) ^ code ^ (code >> 4) ^ value); } +EXPORT_SYMBOL_GPL(add_input_randomness); void add_interrupt_randomness(int irq) { @@ -1465,8 +1466,8 @@ static __init int seqgen_init(void) late_initcall(seqgen_init); #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) -__u32 secure_tcpv6_sequence_number(__u32 *saddr, __u32 *daddr, - __u16 sport, __u16 dport) +__u32 secure_tcpv6_sequence_number(__be32 *saddr, __be32 *daddr, + __be16 sport, __be16 dport) { struct timeval tv; __u32 seq; @@ -1478,10 +1479,10 @@ __u32 secure_tcpv6_sequence_number(__u32 *saddr, __u32 *daddr, */ memcpy(hash, saddr, 16); - hash[4]=(sport << 16) + dport; + hash[4]=((__force u16)sport << 16) + (__force u16)dport; memcpy(&hash[5],keyptr->secret,sizeof(__u32) * 7); - seq = twothirdsMD4Transform(daddr, hash) & HASH_MASK; + seq = twothirdsMD4Transform((const __u32 *)daddr, hash) & HASH_MASK; seq += keyptr->count; do_gettimeofday(&tv); @@ -1495,7 +1496,7 @@ EXPORT_SYMBOL(secure_tcpv6_sequence_number); /* The code below is shamelessly stolen from secure_tcp_sequence_number(). * All blames to Andrey V. Savochkin <saw@msu.ru>. */ -__u32 secure_ip_id(__u32 daddr) +__u32 secure_ip_id(__be32 daddr) { struct keydata *keyptr; __u32 hash[4]; @@ -1507,7 +1508,7 @@ __u32 secure_ip_id(__u32 daddr) * The dest ip address is placed in the starting vector, * which is then hashed with random data. */ - hash[0] = daddr; + hash[0] = (__force __u32)daddr; hash[1] = keyptr->secret[9]; hash[2] = keyptr->secret[10]; hash[3] = keyptr->secret[11]; @@ -1517,8 +1518,8 @@ __u32 secure_ip_id(__u32 daddr) #ifdef CONFIG_INET -__u32 secure_tcp_sequence_number(__u32 saddr, __u32 daddr, - __u16 sport, __u16 dport) +__u32 secure_tcp_sequence_number(__be32 saddr, __be32 daddr, + __be16 sport, __be16 dport) { struct timeval tv; __u32 seq; @@ -1531,9 +1532,9 @@ __u32 secure_tcp_sequence_number(__u32 saddr, __u32 daddr, * Note that the words are placed into the starting vector, which is * then mixed with a partial MD4 over random data. */ - hash[0]=saddr; - hash[1]=daddr; - hash[2]=(sport << 16) + dport; + hash[0]=(__force u32)saddr; + hash[1]=(__force u32)daddr; + hash[2]=((__force u16)sport << 16) + (__force u16)dport; hash[3]=keyptr->secret[11]; seq = half_md4_transform(hash, keyptr->secret) & HASH_MASK; @@ -1558,7 +1559,7 @@ __u32 secure_tcp_sequence_number(__u32 saddr, __u32 daddr, EXPORT_SYMBOL(secure_tcp_sequence_number); /* Generate secure starting point for ephemeral IPV4 transport port search */ -u32 secure_ipv4_port_ephemeral(__u32 saddr, __u32 daddr, __u16 dport) +u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport) { struct keydata *keyptr = get_keyptr(); u32 hash[4]; @@ -1567,25 +1568,25 @@ u32 secure_ipv4_port_ephemeral(__u32 saddr, __u32 daddr, __u16 dport) * Pick a unique starting offset for each ephemeral port search * (saddr, daddr, dport) and 48bits of random data. */ - hash[0] = saddr; - hash[1] = daddr; - hash[2] = dport ^ keyptr->secret[10]; + hash[0] = (__force u32)saddr; + hash[1] = (__force u32)daddr; + hash[2] = (__force u32)dport ^ keyptr->secret[10]; hash[3] = keyptr->secret[11]; return half_md4_transform(hash, keyptr->secret); } #if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) -u32 secure_ipv6_port_ephemeral(const __u32 *saddr, const __u32 *daddr, __u16 dport) +u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr, __be16 dport) { struct keydata *keyptr = get_keyptr(); u32 hash[12]; memcpy(hash, saddr, 16); - hash[4] = dport; + hash[4] = (__force u32)dport; memcpy(&hash[5],keyptr->secret,sizeof(__u32) * 7); - return twothirdsMD4Transform(daddr, hash); + return twothirdsMD4Transform((const __u32 *)daddr, hash); } #endif @@ -1594,17 +1595,17 @@ u32 secure_ipv6_port_ephemeral(const __u32 *saddr, const __u32 *daddr, __u16 dpo * bit's 32-47 increase every key exchange * 0-31 hash(source, dest) */ -u64 secure_dccp_sequence_number(__u32 saddr, __u32 daddr, - __u16 sport, __u16 dport) +u64 secure_dccp_sequence_number(__be32 saddr, __be32 daddr, + __be16 sport, __be16 dport) { struct timeval tv; u64 seq; __u32 hash[4]; struct keydata *keyptr = get_keyptr(); - hash[0] = saddr; - hash[1] = daddr; - hash[2] = (sport << 16) + dport; + hash[0] = (__force u32)saddr; + hash[1] = (__force u32)daddr; + hash[2] = ((__force u16)sport << 16) + (__force u16)dport; hash[3] = keyptr->secret[11]; seq = half_md4_transform(hash, keyptr->secret); @@ -1640,7 +1641,7 @@ unsigned int get_random_int(void) * drain on it), and uses halfMD4Transform within the second. We * also mix it with jiffies and the PID: */ - return secure_ip_id(current->pid + jiffies); + return secure_ip_id((__force __be32)(current->pid + jiffies)); } /* diff --git a/drivers/char/raw.c b/drivers/char/raw.c index 89b718e..3b32313 100644 --- a/drivers/char/raw.c +++ b/drivers/char/raw.c @@ -127,9 +127,9 @@ raw_ioctl(struct inode *inode, struct file *filp, static void bind_device(struct raw_config_request *rq) { - class_device_destroy(raw_class, MKDEV(RAW_MAJOR, rq->raw_minor)); - class_device_create(raw_class, NULL, MKDEV(RAW_MAJOR, rq->raw_minor), - NULL, "raw%d", rq->raw_minor); + device_destroy(raw_class, MKDEV(RAW_MAJOR, rq->raw_minor)); + device_create(raw_class, NULL, MKDEV(RAW_MAJOR, rq->raw_minor), + "raw%d", rq->raw_minor); } /* @@ -200,7 +200,7 @@ static int raw_ctl_ioctl(struct inode *inode, struct file *filp, if (rq.block_major == 0 && rq.block_minor == 0) { /* unbind */ rawdev->binding = NULL; - class_device_destroy(raw_class, + device_destroy(raw_class, MKDEV(RAW_MAJOR, rq.raw_minor)); } else { rawdev->binding = bdget(dev); @@ -283,7 +283,7 @@ static int __init raw_init(void) ret = PTR_ERR(raw_class); goto error_region; } - class_device_create(raw_class, NULL, MKDEV(RAW_MAJOR, 0), NULL, "rawctl"); + device_create(raw_class, NULL, MKDEV(RAW_MAJOR, 0), "rawctl"); return 0; @@ -295,7 +295,7 @@ error: static void __exit raw_exit(void) { - class_device_destroy(raw_class, MKDEV(RAW_MAJOR, 0)); + device_destroy(raw_class, MKDEV(RAW_MAJOR, 0)); class_destroy(raw_class); cdev_del(&raw_cdev); unregister_chrdev_region(MKDEV(RAW_MAJOR, 0), MAX_RAW_MINORS); diff --git a/drivers/char/rio/host.h b/drivers/char/rio/host.h index ee2ddea..23d0681 100644 --- a/drivers/char/rio/host.h +++ b/drivers/char/rio/host.h @@ -44,6 +44,7 @@ ** the host. */ struct Host { + struct pci_dev *pdev; unsigned char Type; /* RIO_EISA, RIO_MCA, ... */ unsigned char Ivec; /* POLLED or ivec number */ unsigned char Mode; /* Control stuff */ diff --git a/drivers/char/rio/rio_linux.c b/drivers/char/rio/rio_linux.c index c382df0..7ac68cb 100644 --- a/drivers/char/rio/rio_linux.c +++ b/drivers/char/rio/rio_linux.c @@ -1017,6 +1017,10 @@ static int __init rio_init(void) rio_dprintk(RIO_DEBUG_PROBE, "Hmm Tested ok, uniqid = %x.\n", p->RIOHosts[p->RIONumHosts].UniqueNum); fix_rio_pci(pdev); + + p->RIOHosts[p->RIONumHosts].pdev = pdev; + pci_dev_get(pdev); + p->RIOLastPCISearch = 0; p->RIONumHosts++; found++; @@ -1066,6 +1070,9 @@ static int __init rio_init(void) ((readb(&p->RIOHosts[p->RIONumHosts].Unique[1]) & 0xFF) << 8) | ((readb(&p->RIOHosts[p->RIONumHosts].Unique[2]) & 0xFF) << 16) | ((readb(&p->RIOHosts[p->RIONumHosts].Unique[3]) & 0xFF) << 24); rio_dprintk(RIO_DEBUG_PROBE, "Hmm Tested ok, uniqid = %x.\n", p->RIOHosts[p->RIONumHosts].UniqueNum); + p->RIOHosts[p->RIONumHosts].pdev = pdev; + pci_dev_get(pdev); + p->RIOLastPCISearch = 0; p->RIONumHosts++; found++; @@ -1181,6 +1188,8 @@ static void __exit rio_exit(void) } /* It is safe/allowed to del_timer a non-active timer */ del_timer(&hp->timer); + if (hp->Type == RIO_PCI) + pci_dev_put(hp->pdev); } if (misc_deregister(&rio_fw_device) < 0) { diff --git a/drivers/char/rio/riocmd.c b/drivers/char/rio/riocmd.c index 4df6ab2..167ebc8 100644 --- a/drivers/char/rio/riocmd.c +++ b/drivers/char/rio/riocmd.c @@ -922,7 +922,7 @@ int RIOUnUse(unsigned long iPortP, struct CmdBlk *CmdBlkP) ** ** Packet is an actual packet structure to be filled in with the packet ** information associated with the command. You need to fill in everything, -** as the command processore doesn't process the command packet in any way. +** as the command processor doesn't process the command packet in any way. ** ** The PreFuncP is called before the packet is enqueued on the host rup. ** PreFuncP is called as (*PreFuncP)(PreArg, CmdBlkP);. PreFuncP must diff --git a/drivers/char/rio/rioctrl.c b/drivers/char/rio/rioctrl.c index 052e812..7ce7761 100644 --- a/drivers/char/rio/rioctrl.c +++ b/drivers/char/rio/rioctrl.c @@ -662,7 +662,7 @@ int riocontrol(struct rio_info *p, dev_t dev, int cmd, unsigned long arg, int su p->RIOError.Error = COPYIN_FAILED; return -EFAULT; } - if (portStats.port >= RIO_PORTS) { + if (portStats.port < 0 || portStats.port >= RIO_PORTS) { p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; return -ENXIO; } @@ -702,7 +702,7 @@ int riocontrol(struct rio_info *p, dev_t dev, int cmd, unsigned long arg, int su p->RIOError.Error = COPYIN_FAILED; return -EFAULT; } - if (portStats.port >= RIO_PORTS) { + if (portStats.port < 0 || portStats.port >= RIO_PORTS) { p->RIOError.Error = PORT_NUMBER_OUT_OF_RANGE; return -ENXIO; } diff --git a/drivers/char/rio/rioinit.c b/drivers/char/rio/rioinit.c index 99f3df0..0794844 100644 --- a/drivers/char/rio/rioinit.c +++ b/drivers/char/rio/rioinit.c @@ -222,7 +222,7 @@ int RIOBoardTest(unsigned long paddr, void __iomem *caddr, unsigned char type, i ** which value will be written into memory. ** Call with op set to zero means that the RAM will not be read and checked ** before it is written. -** Call with op not zero, and the RAM will be read and compated with val[op-1] +** Call with op not zero and the RAM will be read and compared with val[op-1] ** to check that the data from the previous phase was retained. */ diff --git a/drivers/char/rio/rioparam.c b/drivers/char/rio/rioparam.c index 1066d97..bb498d2 100644 --- a/drivers/char/rio/rioparam.c +++ b/drivers/char/rio/rioparam.c @@ -87,8 +87,8 @@ static char *_rioparam_c_sccs_ = "@(#)rioparam.c 1.3"; ** command bit set onto the port. The command bit is in the len field, ** and gets ORed in with the actual byte count. ** -** When you send a packet with the command bit set, then the first -** data byte ( data[0] ) is interpretted as the command to execute. +** When you send a packet with the command bit set the first +** data byte (data[0]) is interpreted as the command to execute. ** It also governs what data structure overlay should accompany the packet. ** Commands are defined in cirrus/cirrus.h ** @@ -103,7 +103,7 @@ static char *_rioparam_c_sccs_ = "@(#)rioparam.c 1.3"; ** ** Most commands do not use the remaining bytes in the data array. The ** exceptions are OPEN MOPEN and CONFIG. (NB. As with the SI CONFIG and -** OPEN are currently analagous). With these three commands the following +** OPEN are currently analogous). With these three commands the following ** 11 data bytes are all used to pass config information such as baud rate etc. ** The fields are also defined in cirrus.h. Some contain straightforward ** information such as the transmit XON character. Two contain the transmit and diff --git a/drivers/char/specialix.c b/drivers/char/specialix.c index d0b88d0..7e1bd95 100644 --- a/drivers/char/specialix.c +++ b/drivers/char/specialix.c @@ -183,11 +183,6 @@ static int sx_poll = HZ; static struct tty_driver *specialix_driver; -static unsigned long baud_table[] = { - 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, - 9600, 19200, 38400, 57600, 115200, 0, -}; - static struct specialix_board sx_board[SX_NBOARD] = { { 0, SX_IOBASE1, 9, }, { 0, SX_IOBASE2, 11, }, @@ -1090,9 +1085,9 @@ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *p if (baud == 38400) { if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - baud ++; + baud = 57600; if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - baud += 2; + baud = 115200; } if (!baud) { @@ -1150,11 +1145,9 @@ static void sx_change_speed(struct specialix_board *bp, struct specialix_port *p sx_out(bp, CD186x_RBPRL, tmp & 0xff); sx_out(bp, CD186x_TBPRL, tmp & 0xff); spin_unlock_irqrestore(&bp->lock, flags); - if (port->custom_divisor) { + if (port->custom_divisor) baud = (SX_OSCFREQ + port->custom_divisor/2) / port->custom_divisor; - baud = ( baud + 5 ) / 10; - } else - baud = (baud_table[baud] + 5) / 10; /* Estimated CPS */ + baud = (baud + 5) / 10; /* Estimated CPS */ /* Two timer ticks seems enough to wakeup something like SLIP driver */ tmp = ((baud + HZ/2) / HZ) * 2 - CD186x_NFIFO; diff --git a/drivers/char/sx.c b/drivers/char/sx.c index 5fec626..cc10af0 100644 --- a/drivers/char/sx.c +++ b/drivers/char/sx.c @@ -2602,7 +2602,7 @@ static void __exit sx_exit (void) } } if (misc_deregister(&sx_fw_device) < 0) { - printk (KERN_INFO "sx: couldn't deregister firmware loader devic\n"); + printk (KERN_INFO "sx: couldn't deregister firmware loader device\n"); } sx_dprintk (SX_DEBUG_CLEANUP, "Cleaning up drivers (%d)\n", sx_initialized); if (sx_initialized) diff --git a/drivers/char/synclink.c b/drivers/char/synclink.c index f2864cc..06784ad 100644 --- a/drivers/char/synclink.c +++ b/drivers/char/synclink.c @@ -133,8 +133,8 @@ static MGSL_PARAMS default_params = { }; #define SHARED_MEM_ADDRESS_SIZE 0x40000 -#define BUFFERLISTSIZE (PAGE_SIZE) -#define DMABUFFERSIZE (PAGE_SIZE) +#define BUFFERLISTSIZE 4096 +#define DMABUFFERSIZE 4096 #define MAXRXFRAMES 7 typedef struct _DMABUFFERENTRY diff --git a/drivers/char/tlclk.c b/drivers/char/tlclk.c index 2444a0e..244d30a 100644 --- a/drivers/char/tlclk.c +++ b/drivers/char/tlclk.c @@ -792,15 +792,14 @@ static int __init tlclk_init(void) ret = misc_register(&tlclk_miscdev); if (ret < 0) { printk(KERN_ERR "tlclk: misc_register returns %d.\n", ret); - ret = -EBUSY; goto out3; } tlclk_device = platform_device_register_simple("telco_clock", -1, NULL, 0); - if (!tlclk_device) { + if (IS_ERR(tlclk_device)) { printk(KERN_ERR "tlclk: platform_device_register failed.\n"); - ret = -EBUSY; + ret = PTR_ERR(tlclk_device); goto out4; } diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c index 6ad2d3b..6e1329d 100644 --- a/drivers/char/tpm/tpm.c +++ b/drivers/char/tpm/tpm.c @@ -1130,7 +1130,7 @@ struct tpm_chip *tpm_register_hardware(struct device *dev, const struct tpm_vend scnprintf(devname, DEVNAME_SIZE, "%s%d", "tpm", chip->dev_num); chip->vendor.miscdev.name = devname; - chip->vendor.miscdev.dev = dev; + chip->vendor.miscdev.parent = dev; chip->dev = get_device(dev); if (misc_register(&chip->vendor.miscdev)) { diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index e90ea39..50dc492 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -3612,7 +3612,8 @@ static struct class *tty_class; * This field is optional, if there is no known struct device * for this tty device it can be set to NULL safely. * - * Returns a pointer to the class device (or ERR_PTR(-EFOO) on error). + * Returns a pointer to the struct device for this tty device + * (or ERR_PTR(-EFOO) on error). * * This call is required to be made to register an individual tty device * if the tty driver's flags have the TTY_DRIVER_DYNAMIC_DEV bit set. If @@ -3622,8 +3623,8 @@ static struct class *tty_class; * Locking: ?? */ -struct class_device *tty_register_device(struct tty_driver *driver, - unsigned index, struct device *device) +struct device *tty_register_device(struct tty_driver *driver, unsigned index, + struct device *device) { char name[64]; dev_t dev = MKDEV(driver->major, driver->minor_start) + index; @@ -3639,7 +3640,7 @@ struct class_device *tty_register_device(struct tty_driver *driver, else tty_line_name(driver, index, name); - return class_device_create(tty_class, NULL, dev, device, "%s", name); + return device_create(tty_class, device, dev, name); } /** @@ -3655,7 +3656,7 @@ struct class_device *tty_register_device(struct tty_driver *driver, void tty_unregister_device(struct tty_driver *driver, unsigned index) { - class_device_destroy(tty_class, MKDEV(driver->major, driver->minor_start) + index); + device_destroy(tty_class, MKDEV(driver->major, driver->minor_start) + index); } EXPORT_SYMBOL(tty_register_device); @@ -3895,20 +3896,20 @@ static int __init tty_init(void) if (cdev_add(&tty_cdev, MKDEV(TTYAUX_MAJOR, 0), 1) || register_chrdev_region(MKDEV(TTYAUX_MAJOR, 0), 1, "/dev/tty") < 0) panic("Couldn't register /dev/tty driver\n"); - class_device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 0), NULL, "tty"); + device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 0), "tty"); cdev_init(&console_cdev, &console_fops); if (cdev_add(&console_cdev, MKDEV(TTYAUX_MAJOR, 1), 1) || register_chrdev_region(MKDEV(TTYAUX_MAJOR, 1), 1, "/dev/console") < 0) panic("Couldn't register /dev/console driver\n"); - class_device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 1), NULL, "console"); + device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 1), "console"); #ifdef CONFIG_UNIX98_PTYS cdev_init(&ptmx_cdev, &ptmx_fops); if (cdev_add(&ptmx_cdev, MKDEV(TTYAUX_MAJOR, 2), 1) || register_chrdev_region(MKDEV(TTYAUX_MAJOR, 2), 1, "/dev/ptmx") < 0) panic("Couldn't register /dev/ptmx driver\n"); - class_device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 2), NULL, "ptmx"); + device_create(tty_class, NULL, MKDEV(TTYAUX_MAJOR, 2), "ptmx"); #endif #ifdef CONFIG_VT @@ -3916,7 +3917,7 @@ static int __init tty_init(void) if (cdev_add(&vc0_cdev, MKDEV(TTY_MAJOR, 0), 1) || register_chrdev_region(MKDEV(TTY_MAJOR, 0), 1, "/dev/vc/0") < 0) panic("Couldn't register /dev/tty0 driver\n"); - class_device_create(tty_class, NULL, MKDEV(TTY_MAJOR, 0), NULL, "tty0"); + device_create(tty_class, NULL, MKDEV(TTY_MAJOR, 0), "tty0"); vty_init(); #endif diff --git a/drivers/char/vc_screen.c b/drivers/char/vc_screen.c index bd7a98c..f442b57 100644 --- a/drivers/char/vc_screen.c +++ b/drivers/char/vc_screen.c @@ -476,16 +476,16 @@ static struct class *vc_class; void vcs_make_sysfs(struct tty_struct *tty) { - class_device_create(vc_class, NULL, MKDEV(VCS_MAJOR, tty->index + 1), - NULL, "vcs%u", tty->index + 1); - class_device_create(vc_class, NULL, MKDEV(VCS_MAJOR, tty->index + 129), - NULL, "vcsa%u", tty->index + 1); + device_create(vc_class, NULL, MKDEV(VCS_MAJOR, tty->index + 1), + "vcs%u", tty->index + 1); + device_create(vc_class, NULL, MKDEV(VCS_MAJOR, tty->index + 129), + "vcsa%u", tty->index + 1); } void vcs_remove_sysfs(struct tty_struct *tty) { - class_device_destroy(vc_class, MKDEV(VCS_MAJOR, tty->index + 1)); - class_device_destroy(vc_class, MKDEV(VCS_MAJOR, tty->index + 129)); + device_destroy(vc_class, MKDEV(VCS_MAJOR, tty->index + 1)); + device_destroy(vc_class, MKDEV(VCS_MAJOR, tty->index + 129)); } int __init vcs_init(void) @@ -494,7 +494,7 @@ int __init vcs_init(void) panic("unable to get major %d for vcs device", VCS_MAJOR); vc_class = class_create(THIS_MODULE, "vc"); - class_device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 0), NULL, "vcs"); - class_device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 128), NULL, "vcsa"); + device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 0), "vcs"); + device_create(vc_class, NULL, MKDEV(VCS_MAJOR, 128), "vcsa"); return 0; } diff --git a/drivers/char/vt.c b/drivers/char/vt.c index 8e4413f..87587b4 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -112,7 +112,7 @@ struct con_driver { const struct consw *con; const char *desc; - struct class_device *class_dev; + struct device *dev; int node; int first; int last; @@ -3023,10 +3023,10 @@ static inline int vt_unbind(struct con_driver *con) } #endif /* CONFIG_VT_HW_CONSOLE_BINDING */ -static ssize_t store_bind(struct class_device *class_device, +static ssize_t store_bind(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) { - struct con_driver *con = class_get_devdata(class_device); + struct con_driver *con = dev_get_drvdata(dev); int bind = simple_strtoul(buf, NULL, 0); if (bind) @@ -3037,17 +3037,19 @@ static ssize_t store_bind(struct class_device *class_device, return count; } -static ssize_t show_bind(struct class_device *class_device, char *buf) +static ssize_t show_bind(struct device *dev, struct device_attribute *attr, + char *buf) { - struct con_driver *con = class_get_devdata(class_device); + struct con_driver *con = dev_get_drvdata(dev); int bind = con_is_bound(con->con); return snprintf(buf, PAGE_SIZE, "%i\n", bind); } -static ssize_t show_name(struct class_device *class_device, char *buf) +static ssize_t show_name(struct device *dev, struct device_attribute *attr, + char *buf) { - struct con_driver *con = class_get_devdata(class_device); + struct con_driver *con = dev_get_drvdata(dev); return snprintf(buf, PAGE_SIZE, "%s %s\n", (con->flag & CON_DRIVER_FLAG_MODULE) ? "(M)" : "(S)", @@ -3055,43 +3057,40 @@ static ssize_t show_name(struct class_device *class_device, char *buf) } -static struct class_device_attribute class_device_attrs[] = { +static struct device_attribute device_attrs[] = { __ATTR(bind, S_IRUGO|S_IWUSR, show_bind, store_bind), __ATTR(name, S_IRUGO, show_name, NULL), }; -static int vtconsole_init_class_device(struct con_driver *con) +static int vtconsole_init_device(struct con_driver *con) { int i; int error = 0; con->flag |= CON_DRIVER_FLAG_ATTR; - class_set_devdata(con->class_dev, con); - for (i = 0; i < ARRAY_SIZE(class_device_attrs); i++) { - error = class_device_create_file(con->class_dev, - &class_device_attrs[i]); + dev_set_drvdata(con->dev, con); + for (i = 0; i < ARRAY_SIZE(device_attrs); i++) { + error = device_create_file(con->dev, &device_attrs[i]); if (error) break; } if (error) { while (--i >= 0) - class_device_remove_file(con->class_dev, - &class_device_attrs[i]); + device_remove_file(con->dev, &device_attrs[i]); con->flag &= ~CON_DRIVER_FLAG_ATTR; } return error; } -static void vtconsole_deinit_class_device(struct con_driver *con) +static void vtconsole_deinit_device(struct con_driver *con) { int i; if (con->flag & CON_DRIVER_FLAG_ATTR) { - for (i = 0; i < ARRAY_SIZE(class_device_attrs); i++) - class_device_remove_file(con->class_dev, - &class_device_attrs[i]); + for (i = 0; i < ARRAY_SIZE(device_attrs); i++) + device_remove_file(con->dev, &device_attrs[i]); con->flag &= ~CON_DRIVER_FLAG_ATTR; } } @@ -3179,18 +3178,17 @@ int register_con_driver(const struct consw *csw, int first, int last) if (retval) goto err; - con_driver->class_dev = class_device_create(vtconsole_class, NULL, - MKDEV(0, con_driver->node), - NULL, "vtcon%i", - con_driver->node); + con_driver->dev = device_create(vtconsole_class, NULL, + MKDEV(0, con_driver->node), + "vtcon%i", con_driver->node); - if (IS_ERR(con_driver->class_dev)) { - printk(KERN_WARNING "Unable to create class_device for %s; " + if (IS_ERR(con_driver->dev)) { + printk(KERN_WARNING "Unable to create device for %s; " "errno = %ld\n", con_driver->desc, - PTR_ERR(con_driver->class_dev)); - con_driver->class_dev = NULL; + PTR_ERR(con_driver->dev)); + con_driver->dev = NULL; } else { - vtconsole_init_class_device(con_driver); + vtconsole_init_device(con_driver); } err: @@ -3226,12 +3224,12 @@ int unregister_con_driver(const struct consw *csw) if (con_driver->con == csw && con_driver->flag & CON_DRIVER_FLAG_MODULE) { - vtconsole_deinit_class_device(con_driver); - class_device_destroy(vtconsole_class, - MKDEV(0, con_driver->node)); + vtconsole_deinit_device(con_driver); + device_destroy(vtconsole_class, + MKDEV(0, con_driver->node)); con_driver->con = NULL; con_driver->desc = NULL; - con_driver->class_dev = NULL; + con_driver->dev = NULL; con_driver->node = 0; con_driver->flag = 0; con_driver->first = 0; @@ -3289,19 +3287,18 @@ static int __init vtconsole_class_init(void) for (i = 0; i < MAX_NR_CON_DRIVER; i++) { struct con_driver *con = ®istered_con_driver[i]; - if (con->con && !con->class_dev) { - con->class_dev = - class_device_create(vtconsole_class, NULL, - MKDEV(0, con->node), NULL, - "vtcon%i", con->node); + if (con->con && !con->dev) { + con->dev = device_create(vtconsole_class, NULL, + MKDEV(0, con->node), + "vtcon%i", con->node); - if (IS_ERR(con->class_dev)) { + if (IS_ERR(con->dev)) { printk(KERN_WARNING "Unable to create " - "class_device for %s; errno = %ld\n", - con->desc, PTR_ERR(con->class_dev)); - con->class_dev = NULL; + "device for %s; errno = %ld\n", + con->desc, PTR_ERR(con->dev)); + con->dev = NULL; } else { - vtconsole_init_class_device(con); + vtconsole_init_device(con); } } } diff --git a/drivers/char/watchdog/Kconfig b/drivers/char/watchdog/Kconfig index 89e46d6d..ea09d0c 100644 --- a/drivers/char/watchdog/Kconfig +++ b/drivers/char/watchdog/Kconfig @@ -13,7 +13,7 @@ config WATCHDOG subsequently opening the file and then failing to write to it for longer than 1 minute will result in rebooting the machine. This could be useful for a networked machine that needs to come back - online as fast as possible after a lock-up. There's both a watchdog + on-line as fast as possible after a lock-up. There's both a watchdog implementation entirely in software (which can sometimes fail to reboot the machine) and a driver for hardware watchdog boards, which are more robust and can also keep track of the temperature inside @@ -60,7 +60,7 @@ config SOFT_WATCHDOG # ARM Architecture -config AT91_WATCHDOG +config AT91RM9200_WATCHDOG tristate "AT91RM9200 watchdog" depends on WATCHDOG && ARCH_AT91RM9200 help @@ -71,7 +71,7 @@ config 21285_WATCHDOG tristate "DC21285 watchdog" depends on WATCHDOG && FOOTBRIDGE help - The Intel Footbridge chip contains a builtin watchdog circuit. Say Y + The Intel Footbridge chip contains a built-in watchdog circuit. Say Y here if you wish to use this. Alternatively say M to compile the driver as a module, which will be called wdt285. @@ -269,11 +269,11 @@ config IB700_WDT Most people will say N. config IBMASR - tristate "IBM Automatic Server Restart" - depends on WATCHDOG && X86 - help + tristate "IBM Automatic Server Restart" + depends on WATCHDOG && X86 + help This is the driver for the IBM Automatic Server Restart watchdog - timer builtin into some eServer xSeries machines. + timer built-in into some eServer xSeries machines. To compile this driver as a module, choose M here: the module will be called ibmasr. @@ -316,13 +316,16 @@ config I8XX_TCO To compile this driver as a module, choose M here: the module will be called i8xx_tco. + Note: This driver will be removed in the near future. Please + use the Intel TCO Timer/Watchdog driver. + config ITCO_WDT - tristate "Intel TCO Timer/Watchdog (EXPERIMENTAL)" - depends on WATCHDOG && (X86 || IA64) && PCI && EXPERIMENTAL + tristate "Intel TCO Timer/Watchdog" + depends on WATCHDOG && (X86 || IA64) && PCI ---help--- Hardware driver for the intel TCO timer based watchdog devices. These drivers are included in the Intel 82801 I/O Controller - Hub family 'from ICH0 up to ICH7) and in the Intel 6300ESB + Hub family (from ICH0 up to ICH8) and in the Intel 6300ESB controller hub. The TCO (Total Cost of Ownership) timer is a watchdog timer @@ -337,6 +340,14 @@ config ITCO_WDT To compile this driver as a module, choose M here: the module will be called iTCO_wdt. +config ITCO_VENDOR_SUPPORT + bool "Intel TCO Timer/Watchdog Specific Vendor Support" + depends on ITCO_WDT + ---help--- + Add vendor specific support to the intel TCO timer based watchdog + devices. At this moment we only have additional support for some + SuperMicro Inc. motherboards. + config SC1200_WDT tristate "National Semiconductor PC87307/PC97307 (ala SC1200) Watchdog" depends on WATCHDOG && X86 @@ -360,6 +371,20 @@ config SCx200_WDT If compiled as a module, it will be called scx200_wdt. +config PC87413_WDT + tristate "NS PC87413 watchdog" + depends on WATCHDOG && X86 + ---help--- + This is the driver for the hardware watchdog on the PC87413 chipset + This watchdog simply watches your kernel to make sure it doesn't + freeze, and if it does, it reboots your computer after a certain + amount of time. + + To compile this driver as a module, choose M here: the + module will be called pc87413_wdt. + + Most people will say N. + config 60XX_WDT tristate "SBC-60XX Watchdog Timer" depends on WATCHDOG && X86 @@ -395,6 +420,26 @@ config CPU5_WDT To compile this driver as a module, choose M here: the module will be called cpu5wdt. +config SMSC37B787_WDT + tristate "Winbond SMsC37B787 Watchdog Timer" + depends on WATCHDOG && X86 + ---help--- + This is the driver for the hardware watchdog component on the + Winbond SMsC37B787 chipset as used on the NetRunner Mainboard + from Vision Systems and maybe others. + + This watchdog simply watches your kernel to make sure it doesn't + freeze, and if it does, it reboots your computer after a certain + amount of time. + + Usually a userspace daemon will notify the kernel WDT driver that + userspace is still alive, at regular intervals. + + To compile this driver as a module, choose M here: the + module will be called smsc37b787_wdt. + + Most people will say N. + config W83627HF_WDT tristate "W83627HF Watchdog Timer" depends on WATCHDOG && X86 @@ -410,6 +455,21 @@ config W83627HF_WDT Most people will say N. +config W83697HF_WDT + tristate "W83697HF/W83697HG Watchdog Timer" + depends on WATCHDOG && X86 + ---help--- + This is the driver for the hardware watchdog on the W83697HF/HG + chipset as used in Dedibox/VIA motherboards (and likely others). + This watchdog simply watches your kernel to make sure it doesn't + freeze, and if it does, it reboots your computer after a certain + amount of time. + + To compile this driver as a module, choose M here: the + module will be called w83697hf_wdt. + + Most people will say N. + config W83877F_WDT tristate "W83877F (EMACS) Watchdog Timer" depends on WATCHDOG && X86 @@ -443,7 +503,7 @@ config MACHZ_WDT depends on WATCHDOG && X86 ---help--- If you are using a ZF Micro MachZ processor, say Y here, otherwise - N. This is the driver for the watchdog timer builtin on that + N. This is the driver for the watchdog timer built-in on that processor using ZF-Logic interface. This watchdog simply watches your kernel to make sure it doesn't freeze, and if it does, it reboots your computer after a certain amount of time. @@ -472,7 +532,6 @@ config SBC_EPX_C3_WATCHDOG To compile this driver as a module, choose M here: the module will be called sbc_epx_c3. - # PowerPC Architecture config 8xx_WDT @@ -502,7 +561,7 @@ config WATCHDOG_RTAS help This driver adds watchdog support for the RTAS watchdog. - To compile this driver as a module, choose M here. The module + To compile this driver as a module, choose M here. The module will be called wdrtas. # MIPS Architecture @@ -516,6 +575,16 @@ config INDYDOG timer expired and no process has written to /dev/watchdog during that time. +config WDT_RM9K_GPI + tristate "RM9000/GPI hardware watchdog" + depends on WATCHDOG && CPU_RM9000 + help + Watchdog implementation using the GPI hardware found on + PMC-Sierra RM9xxx CPUs. + + To compile this driver as a module, choose M here: the + module will be called rm9k_wdt. + # S390 Architecture config ZVM_WATCHDOG @@ -556,7 +625,7 @@ config SH_WDT_MMAP help If you say Y here, user applications will be able to mmap the WDT/CPG registers. -# + # SPARC64 Architecture config WATCHDOG_CP1XXX diff --git a/drivers/char/watchdog/Makefile b/drivers/char/watchdog/Makefile index 7f70aba..2cd8ff8 100644 --- a/drivers/char/watchdog/Makefile +++ b/drivers/char/watchdog/Makefile @@ -23,7 +23,7 @@ obj-$(CONFIG_WDTPCI) += wdt_pci.o obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb.o # ARM Architecture -obj-$(CONFIG_AT91_WATCHDOG) += at91_wdt.o +obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o obj-$(CONFIG_21285_WATCHDOG) += wdt285.o obj-$(CONFIG_977_WATCHDOG) += wdt977.o @@ -47,13 +47,16 @@ obj-$(CONFIG_IBMASR) += ibmasr.o obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o obj-$(CONFIG_I8XX_TCO) += i8xx_tco.o -obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o +obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o iTCO_vendor_support.o obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o +obj-$(CONFIG_PC87413_WDT) += pc87413_wdt.o obj-$(CONFIG_60XX_WDT) += sbc60xxwdt.o obj-$(CONFIG_SBC8360_WDT) += sbc8360.o obj-$(CONFIG_CPU5_WDT) += cpu5wdt.o +obj-$(CONFIG_SMSC37B787_WDT) += smsc37b787_wdt.o obj-$(CONFIG_W83627HF_WDT) += w83627hf_wdt.o +obj-$(CONFIG_W83697HF_WDT) += w83697hf_wdt.o obj-$(CONFIG_W83877F_WDT) += w83877f_wdt.o obj-$(CONFIG_W83977F_WDT) += w83977f_wdt.o obj-$(CONFIG_MACHZ_WDT) += machzwd.o @@ -70,6 +73,7 @@ obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o # MIPS Architecture obj-$(CONFIG_INDYDOG) += indydog.o +obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o # S390 Architecture diff --git a/drivers/char/watchdog/alim7101_wdt.c b/drivers/char/watchdog/alim7101_wdt.c index 5948863..bf25d0a 100644 --- a/drivers/char/watchdog/alim7101_wdt.c +++ b/drivers/char/watchdog/alim7101_wdt.c @@ -77,7 +77,8 @@ static struct pci_dev *alim7101_pmu; static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" + __stringify(CONFIG_WATCHDOG_NOWAYOUT) ")"); /* * Whack the dog @@ -415,6 +416,16 @@ err_out: module_init(alim7101_wdt_init); module_exit(alim7101_wdt_unload); +static struct pci_device_id alim7101_pci_tbl[] __devinitdata = { + { PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { } +}; + +MODULE_DEVICE_TABLE(pci, alim7101_pci_tbl); + MODULE_AUTHOR("Steve Hill"); MODULE_DESCRIPTION("ALi M7101 PMU Computer Watchdog Timer driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/char/watchdog/at91_wdt.c b/drivers/char/watchdog/at91rm9200_wdt.c index 4e7a114..4e7a114 100644 --- a/drivers/char/watchdog/at91_wdt.c +++ b/drivers/char/watchdog/at91rm9200_wdt.c diff --git a/drivers/char/watchdog/iTCO_vendor_support.c b/drivers/char/watchdog/iTCO_vendor_support.c new file mode 100644 index 0000000..4150839 --- /dev/null +++ b/drivers/char/watchdog/iTCO_vendor_support.c @@ -0,0 +1,307 @@ +/* + * intel TCO vendor specific watchdog driver support + * + * (c) Copyright 2006 Wim Van Sebroeck <wim@iguana.be>. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Neither Wim Van Sebroeck nor Iguana vzw. admit liability nor + * provide warranty for any of this software. This material is + * provided "AS-IS" and at no charge. + */ + +/* + * Includes, defines, variables, module parameters, ... + */ + +/* Module and version information */ +#define DRV_NAME "iTCO_vendor_support" +#define DRV_VERSION "1.01" +#define DRV_RELDATE "11-Nov-2006" +#define PFX DRV_NAME ": " + +/* Includes */ +#include <linux/module.h> /* For module specific items */ +#include <linux/moduleparam.h> /* For new moduleparam's */ +#include <linux/types.h> /* For standard types (like size_t) */ +#include <linux/errno.h> /* For the -ENODEV/... values */ +#include <linux/kernel.h> /* For printk/panic/... */ +#include <linux/init.h> /* For __init/__exit/... */ +#include <linux/ioport.h> /* For io-port access */ + +#include <asm/io.h> /* For inb/outb/... */ + +/* iTCO defines */ +#define SMI_EN acpibase + 0x30 /* SMI Control and Enable Register */ +#define TCOBASE acpibase + 0x60 /* TCO base address */ +#define TCO1_STS TCOBASE + 0x04 /* TCO1 Status Register */ + +/* List of vendor support modes */ +#define SUPERMICRO_OLD_BOARD 1 /* SuperMicro Pentium 3 Era 370SSE+-OEM1/P3TSSE */ +#define SUPERMICRO_NEW_BOARD 2 /* SuperMicro Pentium 4 / Xeon 4 / EMT64T Era Systems */ + +static int vendorsupport = 0; +module_param(vendorsupport, int, 0); +MODULE_PARM_DESC(vendorsupport, "iTCO vendor specific support mode, default=0 (none), 1=SuperMicro Pent3, 2=SuperMicro Pent4+"); + +/* + * Vendor Specific Support + */ + +/* + * Vendor Support: 1 + * Board: Super Micro Computer Inc. 370SSE+-OEM1/P3TSSE + * iTCO chipset: ICH2 + * + * Code contributed by: R. Seretny <lkpatches@paypc.com> + * Documentation obtained by R. Seretny from SuperMicro Technical Support + * + * To enable Watchdog function: + * BIOS setup -> Power -> TCO Logic SMI Enable -> Within5Minutes + * This setting enables SMI to clear the watchdog expired flag. + * If BIOS or CPU fail which may cause SMI hang, then system will + * reboot. When application starts to use watchdog function, + * application has to take over the control from SMI. + * + * For P3TSSE, J36 jumper needs to be removed to enable the Watchdog + * function. + * + * Note: The system will reboot when Expire Flag is set TWICE. + * So, if the watchdog timer is 20 seconds, then the maximum hang + * time is about 40 seconds, and the minimum hang time is about + * 20.6 seconds. + */ + +static void supermicro_old_pre_start(unsigned long acpibase) +{ + unsigned long val32; + + val32 = inl(SMI_EN); + val32 &= 0xffffdfff; /* Turn off SMI clearing watchdog */ + outl(val32, SMI_EN); /* Needed to activate watchdog */ +} + +static void supermicro_old_pre_stop(unsigned long acpibase) +{ + unsigned long val32; + + val32 = inl(SMI_EN); + val32 &= 0x00002000; /* Turn on SMI clearing watchdog */ + outl(val32, SMI_EN); /* Needed to deactivate watchdog */ +} + +static void supermicro_old_pre_keepalive(unsigned long acpibase) +{ + /* Reload TCO Timer (done in iTCO_wdt_keepalive) + */ + /* Clear "Expire Flag" (Bit 3 of TC01_STS register) */ + outb(0x08, TCO1_STS); +} + +/* + * Vendor Support: 2 + * Board: Super Micro Computer Inc. P4SBx, P4DPx + * iTCO chipset: ICH4 + * + * Code contributed by: R. Seretny <lkpatches@paypc.com> + * Documentation obtained by R. Seretny from SuperMicro Technical Support + * + * To enable Watchdog function: + * 1. BIOS + * For P4SBx: + * BIOS setup -> Advanced -> Integrated Peripherals -> Watch Dog Feature + * For P4DPx: + * BIOS setup -> Advanced -> I/O Device Configuration -> Watch Dog + * This setting enables or disables Watchdog function. When enabled, the + * default watchdog timer is set to be 5 minutes (about 4’35”). It is + * enough to load and run the OS. The application (service or driver) has + * to take over the control once OS is running up and before watchdog + * expires. + * + * 2. JUMPER + * For P4SBx: JP39 + * For P4DPx: JP37 + * This jumper is used for safety. Closed is enabled. This jumper + * prevents user enables watchdog in BIOS by accident. + * + * To enable Watch Dog function, both BIOS and JUMPER must be enabled. + * + * The documentation lists motherboards P4SBx and P4DPx series as of + * 20-March-2002. However, this code works flawlessly with much newer + * motherboards, such as my X6DHR-8G2 (SuperServer 6014H-82). + * + * The original iTCO driver as written does not actually reset the + * watchdog timer on these machines, as a result they reboot after five + * minutes. + * + * NOTE: You may leave the Watchdog function disabled in the SuperMicro + * BIOS to avoid a "boot-race"... This driver will enable watchdog + * functionality even if it's disabled in the BIOS once the /dev/watchdog + * file is opened. + */ + +/* I/O Port's */ +#define SM_REGINDEX 0x2e /* SuperMicro ICH4+ Register Index */ +#define SM_DATAIO 0x2f /* SuperMicro ICH4+ Register Data I/O */ + +/* Control Register's */ +#define SM_CTLPAGESW 0x07 /* SuperMicro ICH4+ Control Page Switch */ +#define SM_CTLPAGE 0x08 /* SuperMicro ICH4+ Control Page Num */ + +#define SM_WATCHENABLE 0x30 /* Watchdog enable: Bit 0: 0=off, 1=on */ + +#define SM_WATCHPAGE 0x87 /* Watchdog unlock control page */ + +#define SM_ENDWATCH 0xAA /* Watchdog lock control page */ + +#define SM_COUNTMODE 0xf5 /* Watchdog count mode select */ + /* (Bit 3: 0 = seconds, 1 = minutes */ + +#define SM_WATCHTIMER 0xf6 /* 8-bits, Watchdog timer counter (RW) */ + +#define SM_RESETCONTROL 0xf7 /* Watchdog reset control */ + /* Bit 6: timer is reset by kbd interrupt */ + /* Bit 7: timer is reset by mouse interrupt */ + +static void supermicro_new_unlock_watchdog(void) +{ + outb(SM_WATCHPAGE, SM_REGINDEX); /* Write 0x87 to port 0x2e twice */ + outb(SM_WATCHPAGE, SM_REGINDEX); + + outb(SM_CTLPAGESW, SM_REGINDEX); /* Switch to watchdog control page */ + outb(SM_CTLPAGE, SM_DATAIO); +} + +static void supermicro_new_lock_watchdog(void) +{ + outb(SM_ENDWATCH, SM_REGINDEX); +} + +static void supermicro_new_pre_start(unsigned int heartbeat) +{ + unsigned int val; + + supermicro_new_unlock_watchdog(); + + /* Watchdog timer setting needs to be in seconds*/ + outb(SM_COUNTMODE, SM_REGINDEX); + val = inb(SM_DATAIO); + val &= 0xF7; + outb(val, SM_DATAIO); + + /* Write heartbeat interval to WDOG */ + outb (SM_WATCHTIMER, SM_REGINDEX); + outb((heartbeat & 255), SM_DATAIO); + + /* Make sure keyboard/mouse interrupts don't interfere */ + outb(SM_RESETCONTROL, SM_REGINDEX); + val = inb(SM_DATAIO); + val &= 0x3f; + outb(val, SM_DATAIO); + + /* enable watchdog by setting bit 0 of Watchdog Enable to 1 */ + outb(SM_WATCHENABLE, SM_REGINDEX); + val = inb(SM_DATAIO); + val |= 0x01; + outb(val, SM_DATAIO); + + supermicro_new_lock_watchdog(); +} + +static void supermicro_new_pre_stop(void) +{ + unsigned int val; + + supermicro_new_unlock_watchdog(); + + /* disable watchdog by setting bit 0 of Watchdog Enable to 0 */ + outb(SM_WATCHENABLE, SM_REGINDEX); + val = inb(SM_DATAIO); + val &= 0xFE; + outb(val, SM_DATAIO); + + supermicro_new_lock_watchdog(); +} + +static void supermicro_new_pre_set_heartbeat(unsigned int heartbeat) +{ + supermicro_new_unlock_watchdog(); + + /* reset watchdog timeout to heartveat value */ + outb(SM_WATCHTIMER, SM_REGINDEX); + outb((heartbeat & 255), SM_DATAIO); + + supermicro_new_lock_watchdog(); +} + +/* + * Generic Support Functions + */ + +void iTCO_vendor_pre_start(unsigned long acpibase, + unsigned int heartbeat) +{ + if (vendorsupport == SUPERMICRO_OLD_BOARD) + supermicro_old_pre_start(acpibase); + else if (vendorsupport == SUPERMICRO_NEW_BOARD) + supermicro_new_pre_start(heartbeat); +} +EXPORT_SYMBOL(iTCO_vendor_pre_start); + +void iTCO_vendor_pre_stop(unsigned long acpibase) +{ + if (vendorsupport == SUPERMICRO_OLD_BOARD) + supermicro_old_pre_stop(acpibase); + else if (vendorsupport == SUPERMICRO_NEW_BOARD) + supermicro_new_pre_stop(); +} +EXPORT_SYMBOL(iTCO_vendor_pre_stop); + +void iTCO_vendor_pre_keepalive(unsigned long acpibase, unsigned int heartbeat) +{ + if (vendorsupport == SUPERMICRO_OLD_BOARD) + supermicro_old_pre_keepalive(acpibase); + else if (vendorsupport == SUPERMICRO_NEW_BOARD) + supermicro_new_pre_set_heartbeat(heartbeat); +} +EXPORT_SYMBOL(iTCO_vendor_pre_keepalive); + +void iTCO_vendor_pre_set_heartbeat(unsigned int heartbeat) +{ + if (vendorsupport == SUPERMICRO_NEW_BOARD) + supermicro_new_pre_set_heartbeat(heartbeat); +} +EXPORT_SYMBOL(iTCO_vendor_pre_set_heartbeat); + +int iTCO_vendor_check_noreboot_on(void) +{ + switch(vendorsupport) { + case SUPERMICRO_OLD_BOARD: + return 0; + default: + return 1; + } +} +EXPORT_SYMBOL(iTCO_vendor_check_noreboot_on); + +static int __init iTCO_vendor_init_module(void) +{ + printk (KERN_INFO PFX "vendor-support=%d\n", vendorsupport); + return 0; +} + +static void __exit iTCO_vendor_exit_module(void) +{ + printk (KERN_INFO PFX "Module Unloaded\n"); +} + +module_init(iTCO_vendor_init_module); +module_exit(iTCO_vendor_exit_module); + +MODULE_AUTHOR("Wim Van Sebroeck <wim@iguana.be>, R. Seretny <lkpatches@paypc.com>"); +MODULE_DESCRIPTION("Intel TCO Vendor Specific WatchDog Timer Driver Support"); +MODULE_VERSION(DRV_VERSION); +MODULE_LICENSE("GPL"); + diff --git a/drivers/char/watchdog/iTCO_wdt.c b/drivers/char/watchdog/iTCO_wdt.c index aaac94d..7eac922 100644 --- a/drivers/char/watchdog/iTCO_wdt.c +++ b/drivers/char/watchdog/iTCO_wdt.c @@ -35,6 +35,10 @@ * 82801GDH (ICH7DH) : document number 307013-002, 307014-009, * 82801GBM (ICH7-M) : document number 307013-002, 307014-009, * 82801GHM (ICH7-M DH) : document number 307013-002, 307014-009, + * 82801HB (ICH8) : document number 313056-002, 313057-004, + * 82801HR (ICH8R) : document number 313056-002, 313057-004, + * 82801HH (ICH8DH) : document number 313056-002, 313057-004, + * 82801HO (ICH8DO) : document number 313056-002, 313057-004, * 6300ESB (6300ESB) : document number 300641-003 */ @@ -44,8 +48,8 @@ /* Module and version information */ #define DRV_NAME "iTCO_wdt" -#define DRV_VERSION "1.00" -#define DRV_RELDATE "30-Jul-2006" +#define DRV_VERSION "1.01" +#define DRV_RELDATE "11-Nov-2006" #define PFX DRV_NAME ": " /* Includes */ @@ -85,6 +89,9 @@ enum iTCO_chipsets { TCO_ICH7, /* ICH7 & ICH7R */ TCO_ICH7M, /* ICH7-M */ TCO_ICH7MDH, /* ICH7-M DH */ + TCO_ICH8, /* ICH8 & ICH8R */ + TCO_ICH8DH, /* ICH8DH */ + TCO_ICH8DO, /* ICH8DO */ }; static struct { @@ -108,6 +115,9 @@ static struct { {"ICH7 or ICH7R", 2}, {"ICH7-M", 2}, {"ICH7-M DH", 2}, + {"ICH8 or ICH8R", 2}, + {"ICH8DH", 2}, + {"ICH8DO", 2}, {NULL,0} }; @@ -135,6 +145,9 @@ static struct pci_device_id iTCO_wdt_pci_tbl[] = { { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7 }, { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7M }, { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH7MDH }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH8 }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH8DH }, + { PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, TCO_ICH8DO }, { 0, }, /* End of list */ }; MODULE_DEVICE_TABLE (pci, iTCO_wdt_pci_tbl); @@ -176,6 +189,21 @@ static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); +/* iTCO Vendor Specific Support hooks */ +#ifdef CONFIG_ITCO_VENDOR_SUPPORT +extern void iTCO_vendor_pre_start(unsigned long, unsigned int); +extern void iTCO_vendor_pre_stop(unsigned long); +extern void iTCO_vendor_pre_keepalive(unsigned long, unsigned int); +extern void iTCO_vendor_pre_set_heartbeat(unsigned int); +extern int iTCO_vendor_check_noreboot_on(void); +#else +#define iTCO_vendor_pre_start(acpibase, heartbeat) {} +#define iTCO_vendor_pre_stop(acpibase) {} +#define iTCO_vendor_pre_keepalive(acpibase,heartbeat) {} +#define iTCO_vendor_pre_set_heartbeat(heartbeat) {} +#define iTCO_vendor_check_noreboot_on() 1 /* 1=check noreboot; 0=don't check */ +#endif + /* * Some TCO specific functions */ @@ -236,6 +264,8 @@ static int iTCO_wdt_start(void) spin_lock(&iTCO_wdt_private.io_lock); + iTCO_vendor_pre_start(iTCO_wdt_private.ACPIBASE, heartbeat); + /* disable chipset's NO_REBOOT bit */ if (iTCO_wdt_unset_NO_REBOOT_bit()) { printk(KERN_ERR PFX "failed to reset NO_REBOOT flag, reboot disabled by hardware\n"); @@ -260,6 +290,8 @@ static int iTCO_wdt_stop(void) spin_lock(&iTCO_wdt_private.io_lock); + iTCO_vendor_pre_stop(iTCO_wdt_private.ACPIBASE); + /* Bit 11: TCO Timer Halt -> 1 = The TCO timer is disabled */ val = inw(TCO1_CNT); val |= 0x0800; @@ -280,6 +312,8 @@ static int iTCO_wdt_keepalive(void) { spin_lock(&iTCO_wdt_private.io_lock); + iTCO_vendor_pre_keepalive(iTCO_wdt_private.ACPIBASE, heartbeat); + /* Reload the timer by writing to the TCO Timer Counter register */ if (iTCO_wdt_private.iTCO_version == 2) { outw(0x01, TCO_RLD); @@ -306,6 +340,8 @@ static int iTCO_wdt_set_heartbeat(int t) ((iTCO_wdt_private.iTCO_version == 1) && (tmrval > 0x03f))) return -EINVAL; + iTCO_vendor_pre_set_heartbeat(tmrval); + /* Write new heartbeat to watchdog */ if (iTCO_wdt_private.iTCO_version == 2) { spin_lock(&iTCO_wdt_private.io_lock); @@ -355,7 +391,8 @@ static int iTCO_wdt_get_timeleft (int *time_left) spin_unlock(&iTCO_wdt_private.io_lock); *time_left = (val8 * 6) / 10; - } + } else + return -EINVAL; return 0; } @@ -426,7 +463,6 @@ static int iTCO_wdt_ioctl (struct inode *inode, struct file *file, { int new_options, retval = -EINVAL; int new_heartbeat; - int time_left; void __user *argp = (void __user *)arg; int __user *p = argp; static struct watchdog_info ident = { @@ -486,6 +522,8 @@ static int iTCO_wdt_ioctl (struct inode *inode, struct file *file, case WDIOC_GETTIMELEFT: { + int time_left; + if (iTCO_wdt_get_timeleft(&time_left)) return -EINVAL; @@ -554,7 +592,7 @@ static int iTCO_wdt_init(struct pci_dev *pdev, const struct pci_device_id *ent, } /* Check chipset's NO_REBOOT bit */ - if (iTCO_wdt_unset_NO_REBOOT_bit()) { + if (iTCO_wdt_unset_NO_REBOOT_bit() && iTCO_vendor_check_noreboot_on()) { printk(KERN_ERR PFX "failed to reset NO_REBOOT flag, reboot disabled by hardware\n"); ret = -ENODEV; /* Cannot reset NO_REBOOT bit */ goto out; diff --git a/drivers/char/watchdog/pc87413_wdt.c b/drivers/char/watchdog/pc87413_wdt.c new file mode 100644 index 0000000..1d447e3 --- /dev/null +++ b/drivers/char/watchdog/pc87413_wdt.c @@ -0,0 +1,635 @@ +/* + * NS pc87413-wdt Watchdog Timer driver for Linux 2.6.x.x + * + * This code is based on wdt.c with original copyright. + * + * (C) Copyright 2006 Sven Anders, <anders@anduras.de> + * and Marcus Junker, <junker@anduras.de> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Neither Sven Anders, Marcus Junker nor ANDURAS AG + * admit liability nor provide warranty for any of this software. + * This material is provided "AS-IS" and at no charge. + * + * Release 1.1 + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/ioport.h> +#include <linux/delay.h> +#include <linux/notifier.h> +#include <linux/fs.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/moduleparam.h> +#include <linux/version.h> + +#include <asm/io.h> +#include <asm/uaccess.h> +#include <asm/system.h> + +/* #define DEBUG 1 */ + +#define DEFAULT_TIMEOUT 1 /* 1 minute */ +#define MAX_TIMEOUT 255 + +#define VERSION "1.1" +#define MODNAME "pc87413 WDT" +#define PFX MODNAME ": " +#define DPFX MODNAME " - DEBUG: " + +#define WDT_INDEX_IO_PORT (io+0) /* I/O port base (index register) */ +#define WDT_DATA_IO_PORT (WDT_INDEX_IO_PORT+1) +#define SWC_LDN 0x04 +#define SIOCFG2 0x22 /* Serial IO register */ +#define WDCTL 0x10 /* Watchdog-Timer-Controll-Register */ +#define WDTO 0x11 /* Watchdog timeout register */ +#define WDCFG 0x12 /* Watchdog config register */ + +static int io = 0x2E; /* Address used on Portwell Boards */ + +static int timeout = DEFAULT_TIMEOUT; /* timeout value */ +static unsigned long timer_enabled = 0; /* is the timer enabled? */ + +static char expect_close; /* is the close expected? */ + +static spinlock_t io_lock; /* to guard the watchdog from io races */ + +static int nowayout = WATCHDOG_NOWAYOUT; + +/* -- Low level function ----------------------------------------*/ + +/* Select pins for Watchdog output */ + +static inline void pc87413_select_wdt_out (void) +{ + unsigned int cr_data = 0; + + /* Step 1: Select multiple pin,pin55,as WDT output */ + + outb_p(SIOCFG2, WDT_INDEX_IO_PORT); + + cr_data = inb (WDT_DATA_IO_PORT); + + cr_data |= 0x80; /* Set Bit7 to 1*/ + outb_p(SIOCFG2, WDT_INDEX_IO_PORT); + + outb_p(cr_data, WDT_DATA_IO_PORT); + +#ifdef DEBUG + printk(KERN_INFO DPFX "Select multiple pin,pin55,as WDT output:" + " Bit7 to 1: %d\n", cr_data); +#endif +} + +/* Enable SWC functions */ + +static inline void pc87413_enable_swc(void) +{ + unsigned int cr_data=0; + + /* Step 2: Enable SWC functions */ + + outb_p(0x07, WDT_INDEX_IO_PORT); /* Point SWC_LDN (LDN=4) */ + outb_p(SWC_LDN, WDT_DATA_IO_PORT); + + outb_p(0x30, WDT_INDEX_IO_PORT); /* Read Index 0x30 First */ + cr_data = inb(WDT_DATA_IO_PORT); + cr_data |= 0x01; /* Set Bit0 to 1 */ + outb_p(0x30, WDT_INDEX_IO_PORT); + outb_p(cr_data, WDT_DATA_IO_PORT); /* Index0x30_bit0P1 */ + +#ifdef DEBUG + printk(KERN_INFO DPFX "pc87413 - Enable SWC functions\n"); +#endif +} + +/* Read SWC I/O base address */ + +static inline unsigned int pc87413_get_swc_base(void) +{ + unsigned int swc_base_addr = 0; + unsigned char addr_l, addr_h = 0; + + /* Step 3: Read SWC I/O Base Address */ + + outb_p(0x60, WDT_INDEX_IO_PORT); /* Read Index 0x60 */ + addr_h = inb(WDT_DATA_IO_PORT); + + outb_p(0x61, WDT_INDEX_IO_PORT); /* Read Index 0x61 */ + + addr_l = inb(WDT_DATA_IO_PORT); + + swc_base_addr = (addr_h << 8) + addr_l; + +#ifdef DEBUG + printk(KERN_INFO DPFX "Read SWC I/O Base Address: low %d, high %d," + " res %d\n", addr_l, addr_h, swc_base_addr); +#endif + + return swc_base_addr; +} + +/* Select Bank 3 of SWC */ + +static inline void pc87413_swc_bank3(unsigned int swc_base_addr) +{ + /* Step 4: Select Bank3 of SWC */ + + outb_p(inb(swc_base_addr + 0x0f) | 0x03, swc_base_addr + 0x0f); + +#ifdef DEBUG + printk(KERN_INFO DPFX "Select Bank3 of SWC\n"); +#endif +} + +/* Set watchdog timeout to x minutes */ + +static inline void pc87413_programm_wdto(unsigned int swc_base_addr, + char pc87413_time) +{ + /* Step 5: Programm WDTO, Twd. */ + + outb_p(pc87413_time, swc_base_addr + WDTO); + +#ifdef DEBUG + printk(KERN_INFO DPFX "Set WDTO to %d minutes\n", pc87413_time); +#endif +} + +/* Enable WDEN */ + +static inline void pc87413_enable_wden(unsigned int swc_base_addr) +{ + /* Step 6: Enable WDEN */ + + outb_p(inb (swc_base_addr + WDCTL) | 0x01, swc_base_addr + WDCTL); + +#ifdef DEBUG + printk(KERN_INFO DPFX "Enable WDEN\n"); +#endif +} + +/* Enable SW_WD_TREN */ +static inline void pc87413_enable_sw_wd_tren(unsigned int swc_base_addr) +{ + /* Enable SW_WD_TREN */ + + outb_p(inb (swc_base_addr + WDCFG) | 0x80, swc_base_addr + WDCFG); + +#ifdef DEBUG + printk(KERN_INFO DPFX "Enable SW_WD_TREN\n"); +#endif +} + +/* Disable SW_WD_TREN */ + +static inline void pc87413_disable_sw_wd_tren(unsigned int swc_base_addr) +{ + /* Disable SW_WD_TREN */ + + outb_p(inb (swc_base_addr + WDCFG) & 0x7f, swc_base_addr + WDCFG); + +#ifdef DEBUG + printk(KERN_INFO DPFX "pc87413 - Disable SW_WD_TREN\n"); +#endif +} + +/* Enable SW_WD_TRG */ + +static inline void pc87413_enable_sw_wd_trg(unsigned int swc_base_addr) +{ + /* Enable SW_WD_TRG */ + + outb_p(inb (swc_base_addr + WDCTL) | 0x80, swc_base_addr + WDCTL); + +#ifdef DEBUG + printk(KERN_INFO DPFX "pc87413 - Enable SW_WD_TRG\n"); +#endif +} + +/* Disable SW_WD_TRG */ + +static inline void pc87413_disable_sw_wd_trg(unsigned int swc_base_addr) +{ + /* Disable SW_WD_TRG */ + + outb_p(inb (swc_base_addr + WDCTL) & 0x7f, swc_base_addr + WDCTL); + +#ifdef DEBUG + printk(KERN_INFO DPFX "Disable SW_WD_TRG\n"); +#endif +} + +/* -- Higher level functions ------------------------------------*/ + +/* Enable the watchdog */ + +static void pc87413_enable(void) +{ + unsigned int swc_base_addr; + + spin_lock(&io_lock); + + pc87413_select_wdt_out(); + pc87413_enable_swc(); + swc_base_addr = pc87413_get_swc_base(); + pc87413_swc_bank3(swc_base_addr); + pc87413_programm_wdto(swc_base_addr, timeout); + pc87413_enable_wden(swc_base_addr); + pc87413_enable_sw_wd_tren(swc_base_addr); + pc87413_enable_sw_wd_trg(swc_base_addr); + + spin_unlock(&io_lock); +} + +/* Disable the watchdog */ + +static void pc87413_disable(void) +{ + unsigned int swc_base_addr; + + spin_lock(&io_lock); + + pc87413_select_wdt_out(); + pc87413_enable_swc(); + swc_base_addr = pc87413_get_swc_base(); + pc87413_swc_bank3(swc_base_addr); + pc87413_disable_sw_wd_tren(swc_base_addr); + pc87413_disable_sw_wd_trg(swc_base_addr); + pc87413_programm_wdto(swc_base_addr, 0); + + spin_unlock(&io_lock); +} + +/* Refresh the watchdog */ + +static void pc87413_refresh(void) +{ + unsigned int swc_base_addr; + + spin_lock(&io_lock); + + pc87413_select_wdt_out(); + pc87413_enable_swc(); + swc_base_addr = pc87413_get_swc_base(); + pc87413_swc_bank3(swc_base_addr); + pc87413_disable_sw_wd_tren(swc_base_addr); + pc87413_disable_sw_wd_trg(swc_base_addr); + pc87413_programm_wdto(swc_base_addr, timeout); + pc87413_enable_wden(swc_base_addr); + pc87413_enable_sw_wd_tren(swc_base_addr); + pc87413_enable_sw_wd_trg(swc_base_addr); + + spin_unlock(&io_lock); +} + +/* -- File operations -------------------------------------------*/ + +/** + * pc87413_open: + * @inode: inode of device + * @file: file handle to device + * + */ + +static int pc87413_open(struct inode *inode, struct file *file) +{ + /* /dev/watchdog can only be opened once */ + + if (test_and_set_bit(0, &timer_enabled)) + return -EBUSY; + + if (nowayout) + __module_get(THIS_MODULE); + + /* Reload and activate timer */ + pc87413_refresh(); + + printk(KERN_INFO MODNAME "Watchdog enabled. Timeout set to" + " %d minute(s).\n", timeout); + + return nonseekable_open(inode, file); +} + +/** + * pc87413_release: + * @inode: inode to board + * @file: file handle to board + * + * The watchdog has a configurable API. There is a religious dispute + * between people who want their watchdog to be able to shut down and + * those who want to be sure if the watchdog manager dies the machine + * reboots. In the former case we disable the counters, in the latter + * case you have to open it again very soon. + */ + +static int pc87413_release(struct inode *inode, struct file *file) +{ + /* Shut off the timer. */ + + if (expect_close == 42) { + pc87413_disable(); + printk(KERN_INFO MODNAME "Watchdog disabled," + " sleeping again...\n"); + } else { + printk(KERN_CRIT MODNAME "Unexpected close, not stopping" + " watchdog!\n"); + pc87413_refresh(); + } + + clear_bit(0, &timer_enabled); + expect_close = 0; + + return 0; +} + +/** + * pc87413_status: + * + * return, if the watchdog is enabled (timeout is set...) + */ + + +static int pc87413_status(void) +{ + return 0; /* currently not supported */ +} + +/** + * pc87413_write: + * @file: file handle to the watchdog + * @data: data buffer to write + * @len: length in bytes + * @ppos: pointer to the position to write. No seeks allowed + * + * A write to a watchdog device is defined as a keepalive signal. Any + * write of data will do, as we we don't define content meaning. + */ + +static ssize_t pc87413_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) +{ + /* See if we got the magic character 'V' and reload the timer */ + if (len) { + if (!nowayout) { + size_t i; + + /* reset expect flag */ + expect_close = 0; + + /* scan to see whether or not we got the magic character */ + for (i = 0; i != len; i++) { + char c; + if (get_user(c, data+i)) + return -EFAULT; + if (c == 'V') + expect_close = 42; + } + } + + /* someone wrote to us, we should reload the timer */ + pc87413_refresh(); + } + return len; +} + +/** + * pc87413_ioctl: + * @inode: inode of the device + * @file: file handle to the device + * @cmd: watchdog command + * @arg: argument pointer + * + * The watchdog API defines a common set of functions for all watchdogs + * according to their available features. We only actually usefully support + * querying capabilities and current status. + */ + +static int pc87413_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + int new_timeout; + + union { + struct watchdog_info __user *ident; + int __user *i; + } uarg; + + static struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | + WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE, + .firmware_version = 1, + .identity = "PC87413(HF/F) watchdog" + }; + + uarg.i = (int __user *)arg; + + switch(cmd) { + default: + return -ENOTTY; + + case WDIOC_GETSUPPORT: + return copy_to_user(uarg.ident, &ident, + sizeof(ident)) ? -EFAULT : 0; + + case WDIOC_GETSTATUS: + return put_user(pc87413_status(), uarg.i); + + case WDIOC_GETBOOTSTATUS: + return put_user(0, uarg.i); + + case WDIOC_KEEPALIVE: + pc87413_refresh(); +#ifdef DEBUG + printk(KERN_INFO DPFX "keepalive\n"); +#endif + return 0; + + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, uarg.i)) + return -EFAULT; + + // the API states this is given in secs + new_timeout /= 60; + + if (new_timeout < 0 || new_timeout > MAX_TIMEOUT) + return -EINVAL; + + timeout = new_timeout; + pc87413_refresh(); + + // fall through and return the new timeout... + + case WDIOC_GETTIMEOUT: + + new_timeout = timeout * 60; + + return put_user(new_timeout, uarg.i); + + case WDIOC_SETOPTIONS: + { + int options, retval = -EINVAL; + + if (get_user(options, uarg.i)) + return -EFAULT; + + if (options & WDIOS_DISABLECARD) { + pc87413_disable(); + retval = 0; + } + + if (options & WDIOS_ENABLECARD) { + pc87413_enable(); + retval = 0; + } + + return retval; + } + } +} + +/* -- Notifier funtions -----------------------------------------*/ + +/** + * notify_sys: + * @this: our notifier block + * @code: the event being reported + * @unused: unused + * + * Our notifier is called on system shutdowns. We want to turn the card + * off at reboot otherwise the machine will reboot again during memory + * test or worse yet during the following fsck. This would suck, in fact + * trust me - if it happens it does suck. + */ + +static int pc87413_notify_sys(struct notifier_block *this, + unsigned long code, + void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) + { + /* Turn the card off */ + pc87413_disable(); + } + return NOTIFY_DONE; +} + +/* -- Module's structures ---------------------------------------*/ + +static struct file_operations pc87413_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = pc87413_write, + .ioctl = pc87413_ioctl, + .open = pc87413_open, + .release = pc87413_release, +}; + +static struct notifier_block pc87413_notifier = +{ + .notifier_call = pc87413_notify_sys, +}; + +static struct miscdevice pc87413_miscdev= +{ + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &pc87413_fops +}; + +/* -- Module init functions -------------------------------------*/ + +/** + * pc87413_init: module's "constructor" + * + * Set up the WDT watchdog board. All we have to do is grab the + * resources we require and bitch if anyone beat us to them. + * The open() function will actually kick the board off. + */ + +static int __init pc87413_init(void) +{ + int ret; + + spin_lock_init(&io_lock); + + printk(KERN_INFO PFX "Version " VERSION " at io 0x%X\n", WDT_INDEX_IO_PORT); + + /* request_region(io, 2, "pc87413"); */ + + ret = register_reboot_notifier(&pc87413_notifier); + if (ret != 0) { + printk(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", + ret); + } + + ret = misc_register(&pc87413_miscdev); + + if (ret != 0) { + printk(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); + unregister_reboot_notifier(&pc87413_notifier); + return ret; + } + + printk(KERN_INFO PFX "initialized. timeout=%d min \n", timeout); + + pc87413_enable(); + + return 0; +} + +/** + * pc87413_exit: module's "destructor" + * + * Unload the watchdog. You cannot do this with any file handles open. + * If your watchdog is set to continue ticking on close and you unload + * it, well it keeps ticking. We won't get the interrupt but the board + * will not touch PC memory so all is fine. You just have to load a new + * module in 60 seconds or reboot. + */ + +static void __exit pc87413_exit(void) +{ + /* Stop the timer before we leave */ + if (!nowayout) + { + pc87413_disable(); + printk(KERN_INFO MODNAME "Watchdog disabled.\n"); + } + + misc_deregister(&pc87413_miscdev); + unregister_reboot_notifier(&pc87413_notifier); + /* release_region(io,2); */ + + printk(MODNAME " watchdog component driver removed.\n"); +} + +module_init(pc87413_init); +module_exit(pc87413_exit); + +MODULE_AUTHOR("Sven Anders <anders@anduras.de>, Marcus Junker <junker@anduras.de>,"); +MODULE_DESCRIPTION("PC87413 WDT driver"); +MODULE_LICENSE("GPL"); + +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); + +module_param(io, int, 0); +MODULE_PARM_DESC(io, MODNAME " I/O port (default: " __MODULE_STRING(io) ")."); + +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, "Watchdog timeout in minutes (default=" __MODULE_STRING(timeout) ")."); + +module_param(nowayout, int, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); + diff --git a/drivers/char/watchdog/pcwd_usb.c b/drivers/char/watchdog/pcwd_usb.c index bda4533..e275dd4 100644 --- a/drivers/char/watchdog/pcwd_usb.c +++ b/drivers/char/watchdog/pcwd_usb.c @@ -561,8 +561,7 @@ static struct notifier_block usb_pcwd_notifier = { */ static inline void usb_pcwd_delete (struct usb_pcwd_private *usb_pcwd) { - if (usb_pcwd->intr_urb != NULL) - usb_free_urb (usb_pcwd->intr_urb); + usb_free_urb(usb_pcwd->intr_urb); if (usb_pcwd->intr_buffer != NULL) usb_buffer_free(usb_pcwd->udev, usb_pcwd->intr_size, usb_pcwd->intr_buffer, usb_pcwd->intr_dma); diff --git a/drivers/char/watchdog/rm9k_wdt.c b/drivers/char/watchdog/rm9k_wdt.c new file mode 100644 index 0000000..ec39093 --- /dev/null +++ b/drivers/char/watchdog/rm9k_wdt.c @@ -0,0 +1,420 @@ +/* + * Watchdog implementation for GPI h/w found on PMC-Sierra RM9xxx + * chips. + * + * Copyright (C) 2004 by Basler Vision Technologies AG + * Author: Thomas Koeller <thomas.koeller@baslerweb.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/platform_device.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/interrupt.h> +#include <linux/fs.h> +#include <linux/reboot.h> +#include <linux/notifier.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <asm/io.h> +#include <asm/atomic.h> +#include <asm/processor.h> +#include <asm/uaccess.h> +#include <asm/system.h> +#include <asm/rm9k-ocd.h> + +#include <rm9k_wdt.h> + + +#define CLOCK 125000000 +#define MAX_TIMEOUT_SECONDS 32 +#define CPCCR 0x0080 +#define CPGIG1SR 0x0044 +#define CPGIG1ER 0x0054 + + +/* Function prototypes */ +static irqreturn_t wdt_gpi_irqhdl(int, void *, struct pt_regs *); +static void wdt_gpi_start(void); +static void wdt_gpi_stop(void); +static void wdt_gpi_set_timeout(unsigned int); +static int wdt_gpi_open(struct inode *, struct file *); +static int wdt_gpi_release(struct inode *, struct file *); +static ssize_t wdt_gpi_write(struct file *, const char __user *, size_t, loff_t *); +static long wdt_gpi_ioctl(struct file *, unsigned int, unsigned long); +static int wdt_gpi_notify(struct notifier_block *, unsigned long, void *); +static const struct resource *wdt_gpi_get_resource(struct platform_device *, const char *, unsigned int); +static int __init wdt_gpi_probe(struct device *); +static int __exit wdt_gpi_remove(struct device *); + + +static const char wdt_gpi_name[] = "wdt_gpi"; +static atomic_t opencnt; +static int expect_close; +static int locked; + + +/* These are set from device resources */ +static void __iomem * wd_regs; +static unsigned int wd_irq, wd_ctr; + + +/* Module arguments */ +static int timeout = MAX_TIMEOUT_SECONDS; +module_param(timeout, int, 0444); +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds"); + +static unsigned long resetaddr = 0xbffdc200; +module_param(resetaddr, ulong, 0444); +MODULE_PARM_DESC(resetaddr, "Address to write to to force a reset"); + +static unsigned long flagaddr = 0xbffdc104; +module_param(flagaddr, ulong, 0444); +MODULE_PARM_DESC(flagaddr, "Address to write to boot flags to"); + +static int powercycle; +module_param(powercycle, bool, 0444); +MODULE_PARM_DESC(powercycle, "Cycle power if watchdog expires"); + +static int nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, bool, 0444); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be disabled once started"); + + +/* Interrupt handler */ +static irqreturn_t wdt_gpi_irqhdl(int irq, void *ctxt, struct pt_regs *regs) +{ + if (!unlikely(__raw_readl(wd_regs + 0x0008) & 0x1)) + return IRQ_NONE; + __raw_writel(0x1, wd_regs + 0x0008); + + + printk(KERN_CRIT "%s: watchdog expired - resetting system\n", + wdt_gpi_name); + + *(volatile char *) flagaddr |= 0x01; + *(volatile char *) resetaddr = powercycle ? 0x01 : 0x2; + iob(); + while (1) + cpu_relax(); +} + + +/* Watchdog functions */ +static void wdt_gpi_start(void) +{ + u32 reg; + + lock_titan_regs(); + reg = titan_readl(CPGIG1ER); + titan_writel(reg | (0x100 << wd_ctr), CPGIG1ER); + iob(); + unlock_titan_regs(); +} + +static void wdt_gpi_stop(void) +{ + u32 reg; + + lock_titan_regs(); + reg = titan_readl(CPCCR) & ~(0xf << (wd_ctr * 4)); + titan_writel(reg, CPCCR); + reg = titan_readl(CPGIG1ER); + titan_writel(reg & ~(0x100 << wd_ctr), CPGIG1ER); + iob(); + unlock_titan_regs(); +} + +static void wdt_gpi_set_timeout(unsigned int to) +{ + u32 reg; + const u32 wdval = (to * CLOCK) & ~0x0000000f; + + lock_titan_regs(); + reg = titan_readl(CPCCR) & ~(0xf << (wd_ctr * 4)); + titan_writel(reg, CPCCR); + wmb(); + __raw_writel(wdval, wd_regs + 0x0000); + wmb(); + titan_writel(reg | (0x2 << (wd_ctr * 4)), CPCCR); + wmb(); + titan_writel(reg | (0x5 << (wd_ctr * 4)), CPCCR); + iob(); + unlock_titan_regs(); +} + + +/* /dev/watchdog operations */ +static int wdt_gpi_open(struct inode *inode, struct file *file) +{ + int res; + + if (unlikely(atomic_dec_if_positive(&opencnt) < 0)) + return -EBUSY; + + expect_close = 0; + if (locked) { + module_put(THIS_MODULE); + free_irq(wd_irq, &miscdev); + locked = 0; + } + + res = request_irq(wd_irq, wdt_gpi_irqhdl, SA_SHIRQ | SA_INTERRUPT, + wdt_gpi_name, &miscdev); + if (unlikely(res)) + return res; + + wdt_gpi_set_timeout(timeout); + wdt_gpi_start(); + + printk(KERN_INFO "%s: watchdog started, timeout = %u seconds\n", + wdt_gpi_name, timeout); + return nonseekable_open(inode, file); +} + +static int wdt_gpi_release(struct inode *inode, struct file *file) +{ + if (nowayout) { + printk(KERN_INFO "%s: no way out - watchdog left running\n", + wdt_gpi_name); + __module_get(THIS_MODULE); + locked = 1; + } else { + if (expect_close) { + wdt_gpi_stop(); + free_irq(wd_irq, &miscdev); + printk(KERN_INFO "%s: watchdog stopped\n", wdt_gpi_name); + } else { + printk(KERN_CRIT "%s: unexpected close() -" + " watchdog left running\n", + wdt_gpi_name); + wdt_gpi_set_timeout(timeout); + __module_get(THIS_MODULE); + locked = 1; + } + } + + atomic_inc(&opencnt); + return 0; +} + +static ssize_t +wdt_gpi_write(struct file *f, const char __user *d, size_t s, loff_t *o) +{ + char val; + + wdt_gpi_set_timeout(timeout); + expect_close = (s > 0) && !get_user(val, d) && (val == 'V'); + return s ? 1 : 0; +} + +static long +wdt_gpi_ioctl(struct file *f, unsigned int cmd, unsigned long arg) +{ + long res = -ENOTTY; + const long size = _IOC_SIZE(cmd); + int stat; + void __user *argp = (void __user *)arg; + static struct watchdog_info wdinfo = { + .identity = "RM9xxx/GPI watchdog", + .firmware_version = 0, + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING + }; + + if (unlikely(_IOC_TYPE(cmd) != WATCHDOG_IOCTL_BASE)) + return -ENOTTY; + + if ((_IOC_DIR(cmd) & _IOC_READ) + && !access_ok(VERIFY_WRITE, arg, size)) + return -EFAULT; + + if ((_IOC_DIR(cmd) & _IOC_WRITE) + && !access_ok(VERIFY_READ, arg, size)) + return -EFAULT; + + expect_close = 0; + + switch (cmd) { + case WDIOC_GETSUPPORT: + wdinfo.options = nowayout ? + WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING : + WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE; + res = __copy_to_user(argp, &wdinfo, size) ? -EFAULT : size; + break; + + case WDIOC_GETSTATUS: + break; + + case WDIOC_GETBOOTSTATUS: + stat = (*(volatile char *) flagaddr & 0x01) + ? WDIOF_CARDRESET : 0; + res = __copy_to_user(argp, &stat, size) ? + -EFAULT : size; + break; + + case WDIOC_SETOPTIONS: + break; + + case WDIOC_KEEPALIVE: + wdt_gpi_set_timeout(timeout); + res = size; + break; + + case WDIOC_SETTIMEOUT: + { + int val; + if (unlikely(__copy_from_user(&val, argp, size))) { + res = -EFAULT; + break; + } + + if (val > MAX_TIMEOUT_SECONDS) + val = MAX_TIMEOUT_SECONDS; + timeout = val; + wdt_gpi_set_timeout(val); + res = size; + printk(KERN_INFO "%s: timeout set to %u seconds\n", + wdt_gpi_name, timeout); + } + break; + + case WDIOC_GETTIMEOUT: + res = __copy_to_user(argp, &timeout, size) ? + -EFAULT : size; + break; + } + + return res; +} + + +/* Shutdown notifier */ +static int +wdt_gpi_notify(struct notifier_block *this, unsigned long code, void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) + wdt_gpi_stop(); + + return NOTIFY_DONE; +} + + +/* Kernel interfaces */ +static struct file_operations fops = { + .owner = THIS_MODULE, + .open = wdt_gpi_open, + .release = wdt_gpi_release, + .write = wdt_gpi_write, + .unlocked_ioctl = wdt_gpi_ioctl, +}; + +static struct miscdevice miscdev = { + .minor = WATCHDOG_MINOR, + .name = wdt_gpi_name, + .fops = &fops, +}; + +static struct notifier_block wdt_gpi_shutdown = { + .notifier_call = wdt_gpi_notify, +}; + + +/* Init & exit procedures */ +static const struct resource * +wdt_gpi_get_resource(struct platform_device *pdv, const char *name, + unsigned int type) +{ + char buf[80]; + if (snprintf(buf, sizeof buf, "%s_0", name) >= sizeof buf) + return NULL; + return platform_get_resource_byname(pdv, type, buf); +} + +/* No hotplugging on the platform bus - use __init */ +static int __init wdt_gpi_probe(struct device *dev) +{ + int res; + struct platform_device * const pdv = to_platform_device(dev); + const struct resource + * const rr = wdt_gpi_get_resource(pdv, WDT_RESOURCE_REGS, + IORESOURCE_MEM), + * const ri = wdt_gpi_get_resource(pdv, WDT_RESOURCE_IRQ, + IORESOURCE_IRQ), + * const rc = wdt_gpi_get_resource(pdv, WDT_RESOURCE_COUNTER, + 0); + + if (unlikely(!rr || !ri || !rc)) + return -ENXIO; + + wd_regs = ioremap_nocache(rr->start, rr->end + 1 - rr->start); + if (unlikely(!wd_regs)) + return -ENOMEM; + wd_irq = ri->start; + wd_ctr = rc->start; + res = misc_register(&miscdev); + if (res) + iounmap(wd_regs); + else + register_reboot_notifier(&wdt_gpi_shutdown); + return res; +} + +static int __exit wdt_gpi_remove(struct device *dev) +{ + int res; + + unregister_reboot_notifier(&wdt_gpi_shutdown); + res = misc_deregister(&miscdev); + iounmap(wd_regs); + wd_regs = NULL; + return res; +} + + +/* Device driver init & exit */ +static struct device_driver wdt_gpi_driver = { + .name = (char *) wdt_gpi_name, + .bus = &platform_bus_type, + .owner = THIS_MODULE, + .probe = wdt_gpi_probe, + .remove = __exit_p(wdt_gpi_remove), + .shutdown = NULL, + .suspend = NULL, + .resume = NULL, +}; + +static int __init wdt_gpi_init_module(void) +{ + atomic_set(&opencnt, 1); + if (timeout > MAX_TIMEOUT_SECONDS) + timeout = MAX_TIMEOUT_SECONDS; + return driver_register(&wdt_gpi_driver); +} + +static void __exit wdt_gpi_cleanup_module(void) +{ + driver_unregister(&wdt_gpi_driver); +} + +module_init(wdt_gpi_init_module); +module_exit(wdt_gpi_cleanup_module); + +MODULE_AUTHOR("Thomas Koeller <thomas.koeller@baslerweb.com>"); +MODULE_DESCRIPTION("Basler eXcite watchdog driver for gpi devices"); +MODULE_VERSION("0.1"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); + diff --git a/drivers/char/watchdog/s3c2410_wdt.c b/drivers/char/watchdog/s3c2410_wdt.c index 68b1ca976..18cb050 100644 --- a/drivers/char/watchdog/s3c2410_wdt.c +++ b/drivers/char/watchdog/s3c2410_wdt.c @@ -380,18 +380,21 @@ static int s3c2410wdt_probe(struct platform_device *pdev) res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (res == NULL) { printk(KERN_INFO PFX "failed to get irq resource\n"); + iounmap(wdt_base); return -ENOENT; } ret = request_irq(res->start, s3c2410wdt_irq, 0, pdev->name, pdev); if (ret != 0) { printk(KERN_INFO PFX "failed to install irq (%d)\n", ret); + iounmap(wdt_base); return ret; } wdt_clock = clk_get(&pdev->dev, "watchdog"); if (wdt_clock == NULL) { printk(KERN_INFO PFX "failed to find watchdog clock source\n"); + iounmap(wdt_base); return -ENOENT; } @@ -415,6 +418,7 @@ static int s3c2410wdt_probe(struct platform_device *pdev) if (ret) { printk (KERN_ERR PFX "cannot register miscdev on minor=%d (%d)\n", WATCHDOG_MINOR, ret); + iounmap(wdt_base); return ret; } @@ -451,6 +455,7 @@ static int s3c2410wdt_remove(struct platform_device *dev) wdt_clock = NULL; } + iounmap(wdt_base); misc_deregister(&s3c2410wdt_miscdev); return 0; } diff --git a/drivers/char/watchdog/sc1200wdt.c b/drivers/char/watchdog/sc1200wdt.c index d8d0f28..e323983 100644 --- a/drivers/char/watchdog/sc1200wdt.c +++ b/drivers/char/watchdog/sc1200wdt.c @@ -392,7 +392,7 @@ static int __init sc1200wdt_init(void) if (io == -1) { printk(KERN_ERR PFX "io parameter must be specified\n"); ret = -EINVAL; - goto out_clean; + goto out_pnp; } #if defined CONFIG_PNP @@ -405,7 +405,7 @@ static int __init sc1200wdt_init(void) if (!request_region(io, io_len, SC1200_MODULE_NAME)) { printk(KERN_ERR PFX "Unable to register IO port %#x\n", io); ret = -EBUSY; - goto out_clean; + goto out_pnp; } ret = sc1200wdt_probe(); @@ -435,6 +435,11 @@ out_rbt: out_io: release_region(io, io_len); +out_pnp: +#if defined CONFIG_PNP + if (isapnp) + pnp_unregister_driver(&scl200wdt_pnp_driver); +#endif goto out_clean; } diff --git a/drivers/char/watchdog/smsc37b787_wdt.c b/drivers/char/watchdog/smsc37b787_wdt.c new file mode 100644 index 0000000..9f56913 --- /dev/null +++ b/drivers/char/watchdog/smsc37b787_wdt.c @@ -0,0 +1,627 @@ +/* + * SMsC 37B787 Watchdog Timer driver for Linux 2.6.x.x + * + * Based on acquirewdt.c by Alan Cox <alan@redhat.com> + * and some other existing drivers + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * The authors do NOT admit liability nor provide warranty for + * any of this software. This material is provided "AS-IS" in + * the hope that it may be useful for others. + * + * (C) Copyright 2003-2006 Sven Anders <anders@anduras.de> + * + * History: + * 2003 - Created version 1.0 for Linux 2.4.x. + * 2006 - Ported to Linux 2.6, added nowayout and MAGICCLOSE + * features. Released version 1.1 + * + * Theory of operation: + * + * A Watchdog Timer (WDT) is a hardware circuit that can + * reset the computer system in case of a software fault. + * You probably knew that already. + * + * Usually a userspace daemon will notify the kernel WDT driver + * via the /dev/watchdog special device file that userspace is + * still alive, at regular intervals. When such a notification + * occurs, the driver will usually tell the hardware watchdog + * that everything is in order, and that the watchdog should wait + * for yet another little while to reset the system. + * If userspace fails (RAM error, kernel bug, whatever), the + * notifications cease to occur, and the hardware watchdog will + * reset the system (causing a reboot) after the timeout occurs. + * + * Create device with: + * mknod /dev/watchdog c 10 130 + * + * For an example userspace keep-alive daemon, see: + * Documentation/watchdog/watchdog.txt + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/delay.h> +#include <linux/fs.h> +#include <linux/ioport.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/spinlock.h> + +#include <asm/io.h> +#include <asm/uaccess.h> +#include <asm/system.h> + +/* enable support for minutes as units? */ +/* (does not always work correctly, so disabled by default!) */ +#define SMSC_SUPPORT_MINUTES +#undef SMSC_SUPPORT_MINUTES + +#define MAX_TIMEOUT 255 + +#define UNIT_SECOND 0 +#define UNIT_MINUTE 1 + +#define MODNAME "smsc37b787_wdt: " +#define VERSION "1.1" + +#define IOPORT 0x3F0 +#define IOPORT_SIZE 2 +#define IODEV_NO 8 + +static int unit = UNIT_SECOND; /* timer's unit */ +static int timeout = 60; /* timeout value: default is 60 "units" */ +static unsigned long timer_enabled = 0; /* is the timer enabled? */ + +static char expect_close; /* is the close expected? */ + +static spinlock_t io_lock; /* to guard the watchdog from io races */ + +static int nowayout = WATCHDOG_NOWAYOUT; + +/* -- Low level function ----------------------------------------*/ + +/* unlock the IO chip */ + +static inline void open_io_config(void) +{ + outb(0x55, IOPORT); + mdelay(1); + outb(0x55, IOPORT); +} + +/* lock the IO chip */ +static inline void close_io_config(void) +{ + outb(0xAA, IOPORT); +} + +/* select the IO device */ +static inline void select_io_device(unsigned char devno) +{ + outb(0x07, IOPORT); + outb(devno, IOPORT+1); +} + +/* write to the control register */ +static inline void write_io_cr(unsigned char reg, unsigned char data) +{ + outb(reg, IOPORT); + outb(data, IOPORT+1); +} + +/* read from the control register */ +static inline char read_io_cr(unsigned char reg) +{ + outb(reg, IOPORT); + return inb(IOPORT+1); +} + +/* -- Medium level functions ------------------------------------*/ + +static inline void gpio_bit12(unsigned char reg) +{ + // -- General Purpose I/O Bit 1.2 -- + // Bit 0, In/Out: 0 = Output, 1 = Input + // Bit 1, Polarity: 0 = No Invert, 1 = Invert + // Bit 2, Group Enable Intr.: 0 = Disable, 1 = Enable + // Bit 3/4, Function select: 00 = GPI/O, 01 = WDT, 10 = P17, + // 11 = Either Edge Triggered Intr. 2 + // Bit 5/6 (Reserved) + // Bit 7, Output Type: 0 = Push Pull Bit, 1 = Open Drain + write_io_cr(0xE2, reg); +} + +static inline void gpio_bit13(unsigned char reg) +{ + // -- General Purpose I/O Bit 1.3 -- + // Bit 0, In/Out: 0 = Output, 1 = Input + // Bit 1, Polarity: 0 = No Invert, 1 = Invert + // Bit 2, Group Enable Intr.: 0 = Disable, 1 = Enable + // Bit 3, Function select: 0 = GPI/O, 1 = LED + // Bit 4-6 (Reserved) + // Bit 7, Output Type: 0 = Push Pull Bit, 1 = Open Drain + write_io_cr(0xE3, reg); +} + +static inline void wdt_timer_units(unsigned char new_units) +{ + // -- Watchdog timer units -- + // Bit 0-6 (Reserved) + // Bit 7, WDT Time-out Value Units Select + // (0 = Minutes, 1 = Seconds) + write_io_cr(0xF1, new_units); +} + +static inline void wdt_timeout_value(unsigned char new_timeout) +{ + // -- Watchdog Timer Time-out Value -- + // Bit 0-7 Binary coded units (0=Disabled, 1..255) + write_io_cr(0xF2, new_timeout); +} + +static inline void wdt_timer_conf(unsigned char conf) +{ + // -- Watchdog timer configuration -- + // Bit 0 Joystick enable: 0* = No Reset, 1 = Reset WDT upon Gameport I/O + // Bit 1 Keyboard enable: 0* = No Reset, 1 = Reset WDT upon KBD Intr. + // Bit 2 Mouse enable: 0* = No Reset, 1 = Reset WDT upon Mouse Intr. + // Bit 3 Reset the timer + // (Wrong in SMsC documentation? Given as: PowerLED Timout Enabled) + // Bit 4-7 WDT Interrupt Mapping: (0000* = Disabled, + // 0001=IRQ1, 0010=(Invalid), 0011=IRQ3 to 1111=IRQ15) + write_io_cr(0xF3, conf); +} + +static inline void wdt_timer_ctrl(unsigned char reg) +{ + // -- Watchdog timer control -- + // Bit 0 Status Bit: 0 = Timer counting, 1 = Timeout occured + // Bit 1 Power LED Toggle: 0 = Disable Toggle, 1 = Toggle at 1 Hz + // Bit 2 Force Timeout: 1 = Forces WD timeout event (self-cleaning) + // Bit 3 P20 Force Timeout enabled: + // 0 = P20 activity does not generate the WD timeout event + // 1 = P20 Allows rising edge of P20, from the keyboard + // controller, to force the WD timeout event. + // Bit 4 (Reserved) + // -- Soft power management -- + // Bit 5 Stop Counter: 1 = Stop software power down counter + // set via register 0xB8, (self-cleaning) + // (Upon read: 0 = Counter running, 1 = Counter stopped) + // Bit 6 Restart Counter: 1 = Restart software power down counter + // set via register 0xB8, (self-cleaning) + // Bit 7 SPOFF: 1 = Force software power down (self-cleaning) + + write_io_cr(0xF4, reg); +} + +/* -- Higher level functions ------------------------------------*/ + +/* initialize watchdog */ + +static void wb_smsc_wdt_initialize(void) +{ + unsigned char old; + + spin_lock(&io_lock); + open_io_config(); + select_io_device(IODEV_NO); + + // enable the watchdog + gpio_bit13(0x08); // Select pin 80 = LED not GPIO + gpio_bit12(0x0A); // Set pin 79 = WDT not GPIO/Output/Polarity=Invert + + // disable the timeout + wdt_timeout_value(0); + + // reset control register + wdt_timer_ctrl(0x00); + + // reset configuration register + wdt_timer_conf(0x00); + + // read old (timer units) register + old = read_io_cr(0xF1) & 0x7F; + if (unit == UNIT_SECOND) old |= 0x80; // set to seconds + + // set the watchdog timer units + wdt_timer_units(old); + + close_io_config(); + spin_unlock(&io_lock); +} + +/* shutdown the watchdog */ + +static void wb_smsc_wdt_shutdown(void) +{ + spin_lock(&io_lock); + open_io_config(); + select_io_device(IODEV_NO); + + // disable the watchdog + gpio_bit13(0x09); + gpio_bit12(0x09); + + // reset watchdog config register + wdt_timer_conf(0x00); + + // reset watchdog control register + wdt_timer_ctrl(0x00); + + // disable timeout + wdt_timeout_value(0x00); + + close_io_config(); + spin_unlock(&io_lock); +} + +/* set timeout => enable watchdog */ + +static void wb_smsc_wdt_set_timeout(unsigned char new_timeout) +{ + spin_lock(&io_lock); + open_io_config(); + select_io_device(IODEV_NO); + + // set Power LED to blink, if we enable the timeout + wdt_timer_ctrl((new_timeout == 0) ? 0x00 : 0x02); + + // set timeout value + wdt_timeout_value(new_timeout); + + close_io_config(); + spin_unlock(&io_lock); +} + +/* get timeout */ + +static unsigned char wb_smsc_wdt_get_timeout(void) +{ + unsigned char set_timeout; + + spin_lock(&io_lock); + open_io_config(); + select_io_device(IODEV_NO); + set_timeout = read_io_cr(0xF2); + close_io_config(); + spin_unlock(&io_lock); + + return set_timeout; +} + +/* disable watchdog */ + +static void wb_smsc_wdt_disable(void) +{ + // set the timeout to 0 to disable the watchdog + wb_smsc_wdt_set_timeout(0); +} + +/* enable watchdog by setting the current timeout */ + +static void wb_smsc_wdt_enable(void) +{ + // set the current timeout... + wb_smsc_wdt_set_timeout(timeout); +} + +/* reset the timer */ + +static void wb_smsc_wdt_reset_timer(void) +{ + spin_lock(&io_lock); + open_io_config(); + select_io_device(IODEV_NO); + + // reset the timer + wdt_timeout_value(timeout); + wdt_timer_conf(0x08); + + close_io_config(); + spin_unlock(&io_lock); +} + +/* return, if the watchdog is enabled (timeout is set...) */ + +static int wb_smsc_wdt_status(void) +{ + return (wb_smsc_wdt_get_timeout() == 0) ? 0 : WDIOF_KEEPALIVEPING; +} + + +/* -- File operations -------------------------------------------*/ + +/* open => enable watchdog and set initial timeout */ + +static int wb_smsc_wdt_open(struct inode *inode, struct file *file) +{ + /* /dev/watchdog can only be opened once */ + + if (test_and_set_bit(0, &timer_enabled)) + return -EBUSY; + + if (nowayout) + __module_get(THIS_MODULE); + + /* Reload and activate timer */ + wb_smsc_wdt_enable(); + + printk(KERN_INFO MODNAME "Watchdog enabled. Timeout set to %d %s.\n", timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)"); + + return nonseekable_open(inode, file); +} + +/* close => shut off the timer */ + +static int wb_smsc_wdt_release(struct inode *inode, struct file *file) +{ + /* Shut off the timer. */ + + if (expect_close == 42) { + wb_smsc_wdt_disable(); + printk(KERN_INFO MODNAME "Watchdog disabled, sleeping again...\n"); + } else { + printk(KERN_CRIT MODNAME "Unexpected close, not stopping watchdog!\n"); + wb_smsc_wdt_reset_timer(); + } + + clear_bit(0, &timer_enabled); + expect_close = 0; + return 0; +} + +/* write => update the timer to keep the machine alive */ + +static ssize_t wb_smsc_wdt_write(struct file *file, const char __user *data, + size_t len, loff_t *ppos) +{ + /* See if we got the magic character 'V' and reload the timer */ + if (len) { + if (!nowayout) { + size_t i; + + /* reset expect flag */ + expect_close = 0; + + /* scan to see whether or not we got the magic character */ + for (i = 0; i != len; i++) { + char c; + if (get_user(c, data+i)) + return -EFAULT; + if (c == 'V') + expect_close = 42; + } + } + + /* someone wrote to us, we should reload the timer */ + wb_smsc_wdt_reset_timer(); + } + return len; +} + +/* ioctl => control interface */ + +static int wb_smsc_wdt_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + int new_timeout; + + union { + struct watchdog_info __user *ident; + int __user *i; + } uarg; + + static struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | + WDIOF_SETTIMEOUT | + WDIOF_MAGICCLOSE, + .firmware_version = 0, + .identity = "SMsC 37B787 Watchdog" + }; + + uarg.i = (int __user *)arg; + + switch (cmd) { + default: + return -ENOTTY; + + case WDIOC_GETSUPPORT: + return copy_to_user(uarg.ident, &ident, + sizeof(ident)) ? -EFAULT : 0; + + case WDIOC_GETSTATUS: + return put_user(wb_smsc_wdt_status(), uarg.i); + + case WDIOC_GETBOOTSTATUS: + return put_user(0, uarg.i); + + case WDIOC_KEEPALIVE: + wb_smsc_wdt_reset_timer(); + return 0; + + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, uarg.i)) + return -EFAULT; + + // the API states this is given in secs + if (unit == UNIT_MINUTE) + new_timeout /= 60; + + if (new_timeout < 0 || new_timeout > MAX_TIMEOUT) + return -EINVAL; + + timeout = new_timeout; + wb_smsc_wdt_set_timeout(timeout); + + // fall through and return the new timeout... + + case WDIOC_GETTIMEOUT: + + new_timeout = timeout; + + if (unit == UNIT_MINUTE) + new_timeout *= 60; + + return put_user(new_timeout, uarg.i); + + case WDIOC_SETOPTIONS: + { + int options, retval = -EINVAL; + + if (get_user(options, uarg.i)) + return -EFAULT; + + if (options & WDIOS_DISABLECARD) { + wb_smsc_wdt_disable(); + retval = 0; + } + + if (options & WDIOS_ENABLECARD) { + wb_smsc_wdt_enable(); + retval = 0; + } + + return retval; + } + } +} + +/* -- Notifier funtions -----------------------------------------*/ + +static int wb_smsc_wdt_notify_sys(struct notifier_block *this, unsigned long code, void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) + { + // set timeout to 0, to avoid possible race-condition + timeout = 0; + wb_smsc_wdt_disable(); + } + return NOTIFY_DONE; +} + +/* -- Module's structures ---------------------------------------*/ + +static struct file_operations wb_smsc_wdt_fops = +{ + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = wb_smsc_wdt_write, + .ioctl = wb_smsc_wdt_ioctl, + .open = wb_smsc_wdt_open, + .release = wb_smsc_wdt_release, +}; + +static struct notifier_block wb_smsc_wdt_notifier = +{ + .notifier_call = wb_smsc_wdt_notify_sys, +}; + +static struct miscdevice wb_smsc_wdt_miscdev = +{ + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &wb_smsc_wdt_fops, +}; + +/* -- Module init functions -------------------------------------*/ + +/* module's "constructor" */ + +static int __init wb_smsc_wdt_init(void) +{ + int ret; + + spin_lock_init(&io_lock); + + printk("SMsC 37B787 watchdog component driver " VERSION " initialising...\n"); + + if (!request_region(IOPORT, IOPORT_SIZE, "SMsC 37B787 watchdog")) { + printk(KERN_ERR MODNAME "Unable to register IO port %#x\n", IOPORT); + ret = -EBUSY; + goto out_pnp; + } + + // set new maximum, if it's too big + if (timeout > MAX_TIMEOUT) + timeout = MAX_TIMEOUT; + + // init the watchdog timer + wb_smsc_wdt_initialize(); + + ret = register_reboot_notifier(&wb_smsc_wdt_notifier); + if (ret) { + printk(KERN_ERR MODNAME "Unable to register reboot notifier err = %d\n", ret); + goto out_io; + } + + ret = misc_register(&wb_smsc_wdt_miscdev); + if (ret) { + printk(KERN_ERR MODNAME "Unable to register miscdev on minor %d\n", WATCHDOG_MINOR); + goto out_rbt; + } + + // output info + printk(KERN_INFO MODNAME "Timeout set to %d %s.\n", timeout, (unit == UNIT_SECOND) ? "second(s)" : "minute(s)"); + printk(KERN_INFO MODNAME "Watchdog initialized and sleeping (nowayout=%d)...\n", nowayout); + + // ret = 0 + +out_clean: + return ret; + +out_rbt: + unregister_reboot_notifier(&wb_smsc_wdt_notifier); + +out_io: + release_region(IOPORT, IOPORT_SIZE); + +out_pnp: + goto out_clean; +} + +/* module's "destructor" */ + +static void __exit wb_smsc_wdt_exit(void) +{ + /* Stop the timer before we leave */ + if (!nowayout) + { + wb_smsc_wdt_shutdown(); + printk(KERN_INFO MODNAME "Watchdog disabled.\n"); + } + + misc_deregister(&wb_smsc_wdt_miscdev); + unregister_reboot_notifier(&wb_smsc_wdt_notifier); + release_region(IOPORT, IOPORT_SIZE); + + printk("SMsC 37B787 watchdog component driver removed.\n"); +} + +module_init(wb_smsc_wdt_init); +module_exit(wb_smsc_wdt_exit); + +MODULE_AUTHOR("Sven Anders <anders@anduras.de>"); +MODULE_DESCRIPTION("Driver for SMsC 37B787 watchdog component (Version " VERSION ")"); +MODULE_LICENSE("GPL"); + +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); + +#ifdef SMSC_SUPPORT_MINUTES +module_param(unit, int, 0); +MODULE_PARM_DESC(unit, "set unit to use, 0=seconds or 1=minutes, default is 0"); +#endif + +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, "range is 1-255 units, default is 60"); + +module_param(nowayout, int, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); diff --git a/drivers/char/watchdog/w83627hf_wdt.c b/drivers/char/watchdog/w83627hf_wdt.c index b4adc52..07d4bff 100644 --- a/drivers/char/watchdog/w83627hf_wdt.c +++ b/drivers/char/watchdog/w83627hf_wdt.c @@ -33,6 +33,7 @@ #include <linux/notifier.h> #include <linux/reboot.h> #include <linux/init.h> +#include <linux/spinlock.h> #include <asm/io.h> #include <asm/uaccess.h> @@ -44,6 +45,7 @@ static unsigned long wdt_is_open; static char expect_close; +static spinlock_t io_lock; /* You must set this - there is no sane way to probe for this board. */ static int wdt_io = 0x2E; @@ -110,12 +112,16 @@ w83627hf_init(void) static void wdt_ctrl(int timeout) { + spin_lock(&io_lock); + w83627hf_select_wd_register(); outb_p(0xF6, WDT_EFER); /* Select CRF6 */ outb_p(timeout, WDT_EFDR); /* Write Timeout counter to CRF6 */ w83627hf_unselect_wd_register(); + + spin_unlock(&io_lock); } static int @@ -303,6 +309,8 @@ wdt_init(void) { int ret; + spin_lock_init(&io_lock); + printk(KERN_INFO "WDT driver for the Winbond(TM) W83627HF Super I/O chip initialising.\n"); if (wdt_set_heartbeat(timeout)) { diff --git a/drivers/char/watchdog/w83697hf_wdt.c b/drivers/char/watchdog/w83697hf_wdt.c new file mode 100644 index 0000000..7768b55 --- /dev/null +++ b/drivers/char/watchdog/w83697hf_wdt.c @@ -0,0 +1,450 @@ +/* + * w83697hf/hg WDT driver + * + * (c) Copyright 2006 Samuel Tardieu <sam@rfc1149.net> + * (c) Copyright 2006 Marcus Junker <junker@anduras.de> + * + * Based on w83627hf_wdt.c which is based on advantechwdt.c + * which is based on wdt.c. + * Original copyright messages: + * + * (c) Copyright 2003 Pádraig Brady <P@draigBrady.com> + * + * (c) Copyright 2000-2001 Marek Michalkiewicz <marekm@linux.org.pl> + * + * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved. + * http://www.redhat.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * Neither Marcus Junker nor ANDURAS AG admit liability nor provide + * warranty for any of this software. This material is provided + * "AS-IS" and at no charge. + */ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/types.h> +#include <linux/miscdevice.h> +#include <linux/watchdog.h> +#include <linux/fs.h> +#include <linux/ioport.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <linux/init.h> +#include <linux/spinlock.h> + +#include <asm/io.h> +#include <asm/uaccess.h> +#include <asm/system.h> + +#define WATCHDOG_NAME "w83697hf/hg WDT" +#define PFX WATCHDOG_NAME ": " +#define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */ + +static unsigned long wdt_is_open; +static char expect_close; +static spinlock_t io_lock; + +/* You must set this - there is no sane way to probe for this board. */ +static int wdt_io = 0x2e; +module_param(wdt_io, int, 0); +MODULE_PARM_DESC(wdt_io, "w83697hf/hg WDT io port (default 0x2e, 0 = autodetect)"); + +static int timeout = WATCHDOG_TIMEOUT; /* in seconds */ +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=255, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) "."); + +static int nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, int, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=CONFIG_WATCHDOG_NOWAYOUT)"); + +/* + * Kernel methods. + */ + +#define W83697HF_EFER (wdt_io+0) /* Extended Function Enable Register */ +#define W83697HF_EFIR (wdt_io+0) /* Extended Function Index Register (same as EFER) */ +#define W83697HF_EFDR (wdt_io+1) /* Extended Function Data Register */ + +static inline void +w83697hf_unlock(void) +{ + outb_p(0x87, W83697HF_EFER); /* Enter extended function mode */ + outb_p(0x87, W83697HF_EFER); /* Again according to manual */ +} + +static inline void +w83697hf_lock(void) +{ + outb_p(0xAA, W83697HF_EFER); /* Leave extended function mode */ +} + +/* + * The three functions w83697hf_get_reg(), w83697hf_set_reg() and + * w83697hf_write_timeout() must be called with the device unlocked. + */ + +static unsigned char +w83697hf_get_reg(unsigned char reg) +{ + outb_p(reg, W83697HF_EFIR); + return inb_p(W83697HF_EFDR); +} + +static void +w83697hf_set_reg(unsigned char reg, unsigned char data) +{ + outb_p(reg, W83697HF_EFIR); + outb_p(data, W83697HF_EFDR); +} + +static void +w83697hf_write_timeout(int timeout) +{ + w83697hf_set_reg(0xF4, timeout); /* Write Timeout counter to CRF4 */ +} + +static void +w83697hf_select_wdt(void) +{ + w83697hf_unlock(); + w83697hf_set_reg(0x07, 0x08); /* Switch to logic device 8 (GPIO2) */ +} + +static inline void +w83697hf_deselect_wdt(void) +{ + w83697hf_lock(); +} + +static void +w83697hf_init(void) +{ + unsigned char bbuf; + + w83697hf_select_wdt(); + + bbuf = w83697hf_get_reg(0x29); + bbuf &= ~0x60; + bbuf |= 0x20; + w83697hf_set_reg(0x29, bbuf); /* Set pin 119 to WDTO# mode (= CR29, WDT0) */ + + bbuf = w83697hf_get_reg(0xF3); + bbuf &= ~0x04; + w83697hf_set_reg(0xF3, bbuf); /* Count mode is seconds */ + + w83697hf_deselect_wdt(); +} + +static int +wdt_ping(void) +{ + spin_lock(&io_lock); + w83697hf_select_wdt(); + + w83697hf_write_timeout(timeout); + + w83697hf_deselect_wdt(); + spin_unlock(&io_lock); + return 0; +} + +static int +wdt_enable(void) +{ + spin_lock(&io_lock); + w83697hf_select_wdt(); + + w83697hf_write_timeout(timeout); + w83697hf_set_reg(0x30, 1); /* Enable timer */ + + w83697hf_deselect_wdt(); + spin_unlock(&io_lock); + return 0; +} + +static int +wdt_disable(void) +{ + spin_lock(&io_lock); + w83697hf_select_wdt(); + + w83697hf_set_reg(0x30, 0); /* Disable timer */ + w83697hf_write_timeout(0); + + w83697hf_deselect_wdt(); + spin_unlock(&io_lock); + return 0; +} + +static int +wdt_set_heartbeat(int t) +{ + if ((t < 1) || (t > 255)) + return -EINVAL; + + timeout = t; + return 0; +} + +static ssize_t +wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) +{ + if (count) { + if (!nowayout) { + size_t i; + + expect_close = 0; + + for (i = 0; i != count; i++) { + char c; + if (get_user(c, buf+i)) + return -EFAULT; + if (c == 'V') + expect_close = 42; + } + } + wdt_ping(); + } + return count; +} + +static int +wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, + unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int __user *p = argp; + int new_timeout; + static struct watchdog_info ident = { + .options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE, + .firmware_version = 1, + .identity = "W83697HF WDT", + }; + + switch (cmd) { + case WDIOC_GETSUPPORT: + if (copy_to_user(argp, &ident, sizeof(ident))) + return -EFAULT; + break; + + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + + case WDIOC_KEEPALIVE: + wdt_ping(); + break; + + case WDIOC_SETTIMEOUT: + if (get_user(new_timeout, p)) + return -EFAULT; + if (wdt_set_heartbeat(new_timeout)) + return -EINVAL; + wdt_ping(); + /* Fall */ + + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); + + case WDIOC_SETOPTIONS: + { + int options, retval = -EINVAL; + + if (get_user(options, p)) + return -EFAULT; + + if (options & WDIOS_DISABLECARD) { + wdt_disable(); + retval = 0; + } + + if (options & WDIOS_ENABLECARD) { + wdt_enable(); + retval = 0; + } + + return retval; + } + + default: + return -ENOTTY; + } + return 0; +} + +static int +wdt_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(0, &wdt_is_open)) + return -EBUSY; + /* + * Activate + */ + + wdt_enable(); + return nonseekable_open(inode, file); +} + +static int +wdt_close(struct inode *inode, struct file *file) +{ + if (expect_close == 42) { + wdt_disable(); + } else { + printk (KERN_CRIT PFX "Unexpected close, not stopping watchdog!\n"); + wdt_ping(); + } + expect_close = 0; + clear_bit(0, &wdt_is_open); + return 0; +} + +/* + * Notifier for system down + */ + +static int +wdt_notify_sys(struct notifier_block *this, unsigned long code, + void *unused) +{ + if (code == SYS_DOWN || code == SYS_HALT) { + /* Turn the WDT off */ + wdt_disable(); + } + return NOTIFY_DONE; +} + +/* + * Kernel Interfaces + */ + +static struct file_operations wdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = wdt_write, + .ioctl = wdt_ioctl, + .open = wdt_open, + .release = wdt_close, +}; + +static struct miscdevice wdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &wdt_fops, +}; + +/* + * The WDT needs to learn about soft shutdowns in order to + * turn the timebomb registers off. + */ + +static struct notifier_block wdt_notifier = { + .notifier_call = wdt_notify_sys, +}; + +static int +w83697hf_check_wdt(void) +{ + if (!request_region(wdt_io, 2, WATCHDOG_NAME)) { + printk (KERN_ERR PFX "I/O address 0x%x already in use\n", wdt_io); + return -EIO; + } + + printk (KERN_DEBUG PFX "Looking for watchdog at address 0x%x\n", wdt_io); + w83697hf_unlock(); + if (w83697hf_get_reg(0x20) == 0x60) { + printk (KERN_INFO PFX "watchdog found at address 0x%x\n", wdt_io); + w83697hf_lock(); + return 0; + } + w83697hf_lock(); /* Reprotect in case it was a compatible device */ + + printk (KERN_INFO PFX "watchdog not found at address 0x%x\n", wdt_io); + release_region(wdt_io, 2); + return -EIO; +} + +static int w83697hf_ioports[] = { 0x2e, 0x4e, 0x00 }; + +static int __init +wdt_init(void) +{ + int ret, i, found = 0; + + spin_lock_init(&io_lock); + + printk (KERN_INFO PFX "WDT driver for W83697HF/HG initializing\n"); + + if (wdt_io == 0) { + /* we will autodetect the W83697HF/HG watchdog */ + for (i = 0; ((!found) && (w83697hf_ioports[i] != 0)); i++) { + wdt_io = w83697hf_ioports[i]; + if (!w83697hf_check_wdt()) + found++; + } + } else { + if (!w83697hf_check_wdt()) + found++; + } + + if (!found) { + printk (KERN_ERR PFX "No W83697HF/HG could be found\n"); + ret = -EIO; + goto out; + } + + w83697hf_init(); + wdt_disable(); /* Disable watchdog until first use */ + + if (wdt_set_heartbeat(timeout)) { + wdt_set_heartbeat(WATCHDOG_TIMEOUT); + printk (KERN_INFO PFX "timeout value must be 1<=timeout<=255, using %d\n", + WATCHDOG_TIMEOUT); + } + + ret = register_reboot_notifier(&wdt_notifier); + if (ret != 0) { + printk (KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", + ret); + goto unreg_regions; + } + + ret = misc_register(&wdt_miscdev); + if (ret != 0) { + printk (KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); + goto unreg_reboot; + } + + printk (KERN_INFO PFX "initialized. timeout=%d sec (nowayout=%d)\n", + timeout, nowayout); + +out: + return ret; +unreg_reboot: + unregister_reboot_notifier(&wdt_notifier); +unreg_regions: + release_region(wdt_io, 2); + goto out; +} + +static void __exit +wdt_exit(void) +{ + misc_deregister(&wdt_miscdev); + unregister_reboot_notifier(&wdt_notifier); + release_region(wdt_io, 2); +} + +module_init(wdt_init); +module_exit(wdt_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Marcus Junker <junker@anduras.de>, Samuel Tardieu <sam@rfc1149.net>"); +MODULE_DESCRIPTION("w83697hf/hg WDT driver"); +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); |