diff options
Diffstat (limited to 'drivers/char')
-rw-r--r-- | drivers/char/Kconfig | 2 | ||||
-rw-r--r-- | drivers/char/agp/frontend.c | 1 | ||||
-rw-r--r-- | drivers/char/hw_random/bcm2835-rng.c | 10 | ||||
-rw-r--r-- | drivers/char/ipmi/Kconfig | 12 | ||||
-rw-r--r-- | drivers/char/ipmi/ipmi_bt_sm.c | 2 | ||||
-rw-r--r-- | drivers/char/ipmi/ipmi_kcs_sm.c | 5 | ||||
-rw-r--r-- | drivers/char/ipmi/ipmi_msghandler.c | 239 | ||||
-rw-r--r-- | drivers/char/ipmi/ipmi_si_intf.c | 145 | ||||
-rw-r--r-- | drivers/char/pcmcia/Kconfig | 2 | ||||
-rw-r--r-- | drivers/char/random.c | 7 | ||||
-rw-r--r-- | drivers/char/tpm/tpm_ppi.c | 8 | ||||
-rw-r--r-- | drivers/char/ttyprintk.c | 15 |
12 files changed, 279 insertions, 169 deletions
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index fbae63e..6e9f74a 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -40,7 +40,7 @@ config SGI_MBCS source "drivers/tty/serial/Kconfig" config TTY_PRINTK - bool "TTY driver to output user messages via printk" + tristate "TTY driver to output user messages via printk" depends on EXPERT && TTY default n ---help--- diff --git a/drivers/char/agp/frontend.c b/drivers/char/agp/frontend.c index 8121b4c..b297033 100644 --- a/drivers/char/agp/frontend.c +++ b/drivers/char/agp/frontend.c @@ -730,6 +730,7 @@ static int agpioc_info_wrap(struct agp_file_private *priv, void __user *arg) agp_copy_info(agp_bridge, &kerninfo); + memset(&userinfo, 0, sizeof(userinfo)); userinfo.version.major = kerninfo.version.major; userinfo.version.minor = kerninfo.version.minor; userinfo.bridge_id = kerninfo.device->vendor | diff --git a/drivers/char/hw_random/bcm2835-rng.c b/drivers/char/hw_random/bcm2835-rng.c index 8c3b255..e900961 100644 --- a/drivers/char/hw_random/bcm2835-rng.c +++ b/drivers/char/hw_random/bcm2835-rng.c @@ -61,18 +61,18 @@ static int bcm2835_rng_probe(struct platform_device *pdev) } bcm2835_rng_ops.priv = (unsigned long)rng_base; + /* set warm-up count & enable */ + __raw_writel(RNG_WARMUP_COUNT, rng_base + RNG_STATUS); + __raw_writel(RNG_RBGEN, rng_base + RNG_CTRL); + /* register driver */ err = hwrng_register(&bcm2835_rng_ops); if (err) { dev_err(dev, "hwrng registration failed\n"); iounmap(rng_base); - } else { + } else dev_info(dev, "hwrng registered\n"); - /* set warm-up count & enable */ - __raw_writel(RNG_WARMUP_COUNT, rng_base + RNG_STATUS); - __raw_writel(RNG_RBGEN, rng_base + RNG_CTRL); - } return err; } diff --git a/drivers/char/ipmi/Kconfig b/drivers/char/ipmi/Kconfig index 0baa8fa..db1c9b7 100644 --- a/drivers/char/ipmi/Kconfig +++ b/drivers/char/ipmi/Kconfig @@ -50,6 +50,18 @@ config IPMI_SI Currently, only KCS and SMIC are supported. If you are using IPMI, you should probably say "y" here. +config IPMI_SI_PROBE_DEFAULTS + bool 'Probe for all possible IPMI system interfaces by default' + default n + depends on IPMI_SI + help + Modern systems will usually expose IPMI interfaces via a discoverable + firmware mechanism such as ACPI or DMI. Older systems do not, and so + the driver is forced to probe hardware manually. This may cause boot + delays. Say "n" here to disable this manual probing. IPMI will then + only be available on older systems if the "ipmi_si_intf.trydefaults=1" + boot argument is passed. + config IPMI_WATCHDOG tristate 'IPMI Watchdog Timer' help diff --git a/drivers/char/ipmi/ipmi_bt_sm.c b/drivers/char/ipmi/ipmi_bt_sm.c index f5e4cd7..61e7161 100644 --- a/drivers/char/ipmi/ipmi_bt_sm.c +++ b/drivers/char/ipmi/ipmi_bt_sm.c @@ -352,7 +352,7 @@ static inline void write_all_bytes(struct si_sm_data *bt) static inline int read_all_bytes(struct si_sm_data *bt) { - unsigned char i; + unsigned int i; /* * length is "framing info", minimum = 4: NetFn, Seq, Cmd, cCode. diff --git a/drivers/char/ipmi/ipmi_kcs_sm.c b/drivers/char/ipmi/ipmi_kcs_sm.c index 6a4bdc1..8c25f59 100644 --- a/drivers/char/ipmi/ipmi_kcs_sm.c +++ b/drivers/char/ipmi/ipmi_kcs_sm.c @@ -251,8 +251,9 @@ static inline int check_obf(struct si_sm_data *kcs, unsigned char status, if (!GET_STATUS_OBF(status)) { kcs->obf_timeout -= time; if (kcs->obf_timeout < 0) { - start_error_recovery(kcs, "OBF not ready in time"); - return 1; + kcs->obf_timeout = OBF_RETRY_TIMEOUT; + start_error_recovery(kcs, "OBF not ready in time"); + return 1; } return 0; } diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c index ec4e10f..e6db938 100644 --- a/drivers/char/ipmi/ipmi_msghandler.c +++ b/drivers/char/ipmi/ipmi_msghandler.c @@ -55,6 +55,7 @@ static struct ipmi_recv_msg *ipmi_alloc_recv_msg(void); static int ipmi_init_msghandler(void); static void smi_recv_tasklet(unsigned long); static void handle_new_recv_msgs(ipmi_smi_t intf); +static void need_waiter(ipmi_smi_t intf); static int initialized; @@ -73,14 +74,28 @@ static struct proc_dir_entry *proc_ipmi_root; */ #define MAX_MSG_TIMEOUT 60000 +/* Call every ~1000 ms. */ +#define IPMI_TIMEOUT_TIME 1000 + +/* How many jiffies does it take to get to the timeout time. */ +#define IPMI_TIMEOUT_JIFFIES ((IPMI_TIMEOUT_TIME * HZ) / 1000) + +/* + * Request events from the queue every second (this is the number of + * IPMI_TIMEOUT_TIMES between event requests). Hopefully, in the + * future, IPMI will add a way to know immediately if an event is in + * the queue and this silliness can go away. + */ +#define IPMI_REQUEST_EV_TIME (1000 / (IPMI_TIMEOUT_TIME)) + /* * The main "user" data structure. */ struct ipmi_user { struct list_head link; - /* Set to "0" when the user is destroyed. */ - int valid; + /* Set to false when the user is destroyed. */ + bool valid; struct kref refcount; @@ -92,7 +107,7 @@ struct ipmi_user { ipmi_smi_t intf; /* Does this interface receive IPMI events? */ - int gets_events; + bool gets_events; }; struct cmd_rcvr { @@ -383,6 +398,9 @@ struct ipmi_smi { unsigned int waiting_events_count; /* How many events in queue? */ char delivering_events; char event_msg_printed; + atomic_t event_waiters; + unsigned int ticks_to_req_ev; + int last_needs_timer; /* * The event receiver for my BMC, only really used at panic @@ -395,7 +413,7 @@ struct ipmi_smi { /* For handling of maintenance mode. */ int maintenance_mode; - int maintenance_mode_enable; + bool maintenance_mode_enable; int auto_maintenance_timeout; spinlock_t maintenance_mode_lock; /* Used in a timer... */ @@ -451,7 +469,6 @@ static DEFINE_MUTEX(ipmi_interfaces_mutex); static LIST_HEAD(smi_watchers); static DEFINE_MUTEX(smi_watchers_mutex); - #define ipmi_inc_stat(intf, stat) \ atomic_inc(&(intf)->stats[IPMI_STAT_ ## stat]) #define ipmi_get_stat(intf, stat) \ @@ -772,6 +789,7 @@ static int intf_next_seq(ipmi_smi_t intf, *seq = i; *seqid = intf->seq_table[i].seqid; intf->curr_seq = (i+1)%IPMI_IPMB_NUM_SEQ; + need_waiter(intf); } else { rv = -EAGAIN; } @@ -941,7 +959,7 @@ int ipmi_create_user(unsigned int if_num, new_user->handler = handler; new_user->handler_data = handler_data; new_user->intf = intf; - new_user->gets_events = 0; + new_user->gets_events = false; if (!try_module_get(intf->handlers->owner)) { rv = -ENODEV; @@ -962,10 +980,15 @@ int ipmi_create_user(unsigned int if_num, */ mutex_unlock(&ipmi_interfaces_mutex); - new_user->valid = 1; + new_user->valid = true; spin_lock_irqsave(&intf->seq_lock, flags); list_add_rcu(&new_user->link, &intf->users); spin_unlock_irqrestore(&intf->seq_lock, flags); + if (handler->ipmi_watchdog_pretimeout) { + /* User wants pretimeouts, so make sure to watch for them. */ + if (atomic_inc_return(&intf->event_waiters) == 1) + need_waiter(intf); + } *user = new_user; return 0; @@ -1019,7 +1042,13 @@ int ipmi_destroy_user(ipmi_user_t user) struct cmd_rcvr *rcvr; struct cmd_rcvr *rcvrs = NULL; - user->valid = 0; + user->valid = false; + + if (user->handler->ipmi_watchdog_pretimeout) + atomic_dec(&intf->event_waiters); + + if (user->gets_events) + atomic_dec(&intf->event_waiters); /* Remove the user from the interface's sequence table. */ spin_lock_irqsave(&intf->seq_lock, flags); @@ -1155,25 +1184,23 @@ int ipmi_set_maintenance_mode(ipmi_user_t user, int mode) if (intf->maintenance_mode != mode) { switch (mode) { case IPMI_MAINTENANCE_MODE_AUTO: - intf->maintenance_mode = mode; intf->maintenance_mode_enable = (intf->auto_maintenance_timeout > 0); break; case IPMI_MAINTENANCE_MODE_OFF: - intf->maintenance_mode = mode; - intf->maintenance_mode_enable = 0; + intf->maintenance_mode_enable = false; break; case IPMI_MAINTENANCE_MODE_ON: - intf->maintenance_mode = mode; - intf->maintenance_mode_enable = 1; + intf->maintenance_mode_enable = true; break; default: rv = -EINVAL; goto out_unlock; } + intf->maintenance_mode = mode; maintenance_mode_update(intf); } @@ -1184,7 +1211,7 @@ int ipmi_set_maintenance_mode(ipmi_user_t user, int mode) } EXPORT_SYMBOL(ipmi_set_maintenance_mode); -int ipmi_set_gets_events(ipmi_user_t user, int val) +int ipmi_set_gets_events(ipmi_user_t user, bool val) { unsigned long flags; ipmi_smi_t intf = user->intf; @@ -1194,8 +1221,18 @@ int ipmi_set_gets_events(ipmi_user_t user, int val) INIT_LIST_HEAD(&msgs); spin_lock_irqsave(&intf->events_lock, flags); + if (user->gets_events == val) + goto out; + user->gets_events = val; + if (val) { + if (atomic_inc_return(&intf->event_waiters) == 1) + need_waiter(intf); + } else { + atomic_dec(&intf->event_waiters); + } + if (intf->delivering_events) /* * Another thread is delivering events for this, so @@ -1289,6 +1326,9 @@ int ipmi_register_for_cmd(ipmi_user_t user, goto out_unlock; } + if (atomic_inc_return(&intf->event_waiters) == 1) + need_waiter(intf); + list_add_rcu(&rcvr->link, &intf->cmd_rcvrs); out_unlock: @@ -1330,6 +1370,7 @@ int ipmi_unregister_for_cmd(ipmi_user_t user, mutex_unlock(&intf->cmd_rcvrs_mutex); synchronize_rcu(); while (rcvrs) { + atomic_dec(&intf->event_waiters); rcvr = rcvrs; rcvrs = rcvr->next; kfree(rcvr); @@ -1535,7 +1576,7 @@ static int i_ipmi_request(ipmi_user_t user, = IPMI_MAINTENANCE_MODE_TIMEOUT; if (!intf->maintenance_mode && !intf->maintenance_mode_enable) { - intf->maintenance_mode_enable = 1; + intf->maintenance_mode_enable = true; maintenance_mode_update(intf); } spin_unlock_irqrestore(&intf->maintenance_mode_lock, @@ -2876,6 +2917,8 @@ int ipmi_register_smi(struct ipmi_smi_handlers *handlers, (unsigned long) intf); atomic_set(&intf->watchdog_pretimeouts_to_deliver, 0); spin_lock_init(&intf->events_lock); + atomic_set(&intf->event_waiters, 0); + intf->ticks_to_req_ev = IPMI_REQUEST_EV_TIME; INIT_LIST_HEAD(&intf->waiting_events); intf->waiting_events_count = 0; mutex_init(&intf->cmd_rcvrs_mutex); @@ -3965,7 +4008,8 @@ smi_from_recv_msg(ipmi_smi_t intf, struct ipmi_recv_msg *recv_msg, static void check_msg_timeout(ipmi_smi_t intf, struct seq_table *ent, struct list_head *timeouts, long timeout_period, - int slot, unsigned long *flags) + int slot, unsigned long *flags, + unsigned int *waiting_msgs) { struct ipmi_recv_msg *msg; struct ipmi_smi_handlers *handlers; @@ -3977,8 +4021,10 @@ static void check_msg_timeout(ipmi_smi_t intf, struct seq_table *ent, return; ent->timeout -= timeout_period; - if (ent->timeout > 0) + if (ent->timeout > 0) { + (*waiting_msgs)++; return; + } if (ent->retries_left == 0) { /* The message has used all its retries. */ @@ -3995,6 +4041,8 @@ static void check_msg_timeout(ipmi_smi_t intf, struct seq_table *ent, struct ipmi_smi_msg *smi_msg; /* More retries, send again. */ + (*waiting_msgs)++; + /* * Start with the max timer, set to normal timer after * the message is sent. @@ -4040,117 +4088,118 @@ static void check_msg_timeout(ipmi_smi_t intf, struct seq_table *ent, } } -static void ipmi_timeout_handler(long timeout_period) +static unsigned int ipmi_timeout_handler(ipmi_smi_t intf, long timeout_period) { - ipmi_smi_t intf; struct list_head timeouts; struct ipmi_recv_msg *msg, *msg2; unsigned long flags; int i; + unsigned int waiting_msgs = 0; - rcu_read_lock(); - list_for_each_entry_rcu(intf, &ipmi_interfaces, link) { - tasklet_schedule(&intf->recv_tasklet); - - /* - * Go through the seq table and find any messages that - * have timed out, putting them in the timeouts - * list. - */ - INIT_LIST_HEAD(&timeouts); - spin_lock_irqsave(&intf->seq_lock, flags); - for (i = 0; i < IPMI_IPMB_NUM_SEQ; i++) - check_msg_timeout(intf, &(intf->seq_table[i]), - &timeouts, timeout_period, i, - &flags); - spin_unlock_irqrestore(&intf->seq_lock, flags); + /* + * Go through the seq table and find any messages that + * have timed out, putting them in the timeouts + * list. + */ + INIT_LIST_HEAD(&timeouts); + spin_lock_irqsave(&intf->seq_lock, flags); + for (i = 0; i < IPMI_IPMB_NUM_SEQ; i++) + check_msg_timeout(intf, &(intf->seq_table[i]), + &timeouts, timeout_period, i, + &flags, &waiting_msgs); + spin_unlock_irqrestore(&intf->seq_lock, flags); - list_for_each_entry_safe(msg, msg2, &timeouts, link) - deliver_err_response(msg, IPMI_TIMEOUT_COMPLETION_CODE); + list_for_each_entry_safe(msg, msg2, &timeouts, link) + deliver_err_response(msg, IPMI_TIMEOUT_COMPLETION_CODE); - /* - * Maintenance mode handling. Check the timeout - * optimistically before we claim the lock. It may - * mean a timeout gets missed occasionally, but that - * only means the timeout gets extended by one period - * in that case. No big deal, and it avoids the lock - * most of the time. - */ + /* + * Maintenance mode handling. Check the timeout + * optimistically before we claim the lock. It may + * mean a timeout gets missed occasionally, but that + * only means the timeout gets extended by one period + * in that case. No big deal, and it avoids the lock + * most of the time. + */ + if (intf->auto_maintenance_timeout > 0) { + spin_lock_irqsave(&intf->maintenance_mode_lock, flags); if (intf->auto_maintenance_timeout > 0) { - spin_lock_irqsave(&intf->maintenance_mode_lock, flags); - if (intf->auto_maintenance_timeout > 0) { - intf->auto_maintenance_timeout - -= timeout_period; - if (!intf->maintenance_mode - && (intf->auto_maintenance_timeout <= 0)) { - intf->maintenance_mode_enable = 0; - maintenance_mode_update(intf); - } + intf->auto_maintenance_timeout + -= timeout_period; + if (!intf->maintenance_mode + && (intf->auto_maintenance_timeout <= 0)) { + intf->maintenance_mode_enable = false; + maintenance_mode_update(intf); } - spin_unlock_irqrestore(&intf->maintenance_mode_lock, - flags); } + spin_unlock_irqrestore(&intf->maintenance_mode_lock, + flags); } - rcu_read_unlock(); + + tasklet_schedule(&intf->recv_tasklet); + + return waiting_msgs; } -static void ipmi_request_event(void) +static void ipmi_request_event(ipmi_smi_t intf) { - ipmi_smi_t intf; struct ipmi_smi_handlers *handlers; - rcu_read_lock(); - /* - * Called from the timer, no need to check if handlers is - * valid. - */ - list_for_each_entry_rcu(intf, &ipmi_interfaces, link) { - /* No event requests when in maintenance mode. */ - if (intf->maintenance_mode_enable) - continue; + /* No event requests when in maintenance mode. */ + if (intf->maintenance_mode_enable) + return; - handlers = intf->handlers; - if (handlers) - handlers->request_events(intf->send_info); - } - rcu_read_unlock(); + handlers = intf->handlers; + if (handlers) + handlers->request_events(intf->send_info); } static struct timer_list ipmi_timer; -/* Call every ~1000 ms. */ -#define IPMI_TIMEOUT_TIME 1000 - -/* How many jiffies does it take to get to the timeout time. */ -#define IPMI_TIMEOUT_JIFFIES ((IPMI_TIMEOUT_TIME * HZ) / 1000) - -/* - * Request events from the queue every second (this is the number of - * IPMI_TIMEOUT_TIMES between event requests). Hopefully, in the - * future, IPMI will add a way to know immediately if an event is in - * the queue and this silliness can go away. - */ -#define IPMI_REQUEST_EV_TIME (1000 / (IPMI_TIMEOUT_TIME)) - static atomic_t stop_operation; -static unsigned int ticks_to_req_ev = IPMI_REQUEST_EV_TIME; static void ipmi_timeout(unsigned long data) { + ipmi_smi_t intf; + int nt = 0; + if (atomic_read(&stop_operation)) return; - ticks_to_req_ev--; - if (ticks_to_req_ev == 0) { - ipmi_request_event(); - ticks_to_req_ev = IPMI_REQUEST_EV_TIME; - } + rcu_read_lock(); + list_for_each_entry_rcu(intf, &ipmi_interfaces, link) { + int lnt = 0; + + if (atomic_read(&intf->event_waiters)) { + intf->ticks_to_req_ev--; + if (intf->ticks_to_req_ev == 0) { + ipmi_request_event(intf); + intf->ticks_to_req_ev = IPMI_REQUEST_EV_TIME; + } + lnt++; + } - ipmi_timeout_handler(IPMI_TIMEOUT_TIME); + lnt += ipmi_timeout_handler(intf, IPMI_TIMEOUT_TIME); - mod_timer(&ipmi_timer, jiffies + IPMI_TIMEOUT_JIFFIES); + lnt = !!lnt; + if (lnt != intf->last_needs_timer && + intf->handlers->set_need_watch) + intf->handlers->set_need_watch(intf->send_info, lnt); + intf->last_needs_timer = lnt; + + nt += lnt; + } + rcu_read_unlock(); + + if (nt) + mod_timer(&ipmi_timer, jiffies + IPMI_TIMEOUT_JIFFIES); } +static void need_waiter(ipmi_smi_t intf) +{ + /* Racy, but worst case we start the timer twice. */ + if (!timer_pending(&ipmi_timer)) + mod_timer(&ipmi_timer, jiffies + IPMI_TIMEOUT_JIFFIES); +} static atomic_t smi_msg_inuse_count = ATOMIC_INIT(0); static atomic_t recv_msg_inuse_count = ATOMIC_INIT(0); diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index b7efd3c..1c4bb4f 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -217,7 +217,7 @@ struct smi_info { unsigned char msg_flags; /* Does the BMC have an event buffer? */ - char has_event_buffer; + bool has_event_buffer; /* * If set to true, this will request events the next time the @@ -230,7 +230,7 @@ struct smi_info { * call. Generally used after a panic to make sure stuff goes * out. */ - int run_to_completion; + bool run_to_completion; /* The I/O port of an SI interface. */ int port; @@ -248,19 +248,25 @@ struct smi_info { /* The timer for this si. */ struct timer_list si_timer; + /* This flag is set, if the timer is running (timer_pending() isn't enough) */ + bool timer_running; + /* The time (in jiffies) the last timeout occurred at. */ unsigned long last_timeout_jiffies; /* Used to gracefully stop the timer without race conditions. */ atomic_t stop_operation; + /* Are we waiting for the events, pretimeouts, received msgs? */ + atomic_t need_watch; + /* * The driver will disable interrupts when it gets into a * situation where it cannot handle messages due to lack of * memory. Once that situation clears up, it will re-enable * interrupts. */ - int interrupt_disabled; + bool interrupt_disabled; /* From the get device id response... */ struct ipmi_device_id device_id; @@ -273,7 +279,7 @@ struct smi_info { * True if we allocated the device, false if it came from * someplace else (like PCI). */ - int dev_registered; + bool dev_registered; /* Slave address, could be reported from DMI. */ unsigned char slave_addr; @@ -297,19 +303,19 @@ struct smi_info { static int force_kipmid[SI_MAX_PARMS]; static int num_force_kipmid; #ifdef CONFIG_PCI -static int pci_registered; +static bool pci_registered; #endif #ifdef CONFIG_ACPI -static int pnp_registered; +static bool pnp_registered; #endif #ifdef CONFIG_PARISC -static int parisc_registered; +static bool parisc_registered; #endif static unsigned int kipmid_max_busy_us[SI_MAX_PARMS]; static int num_max_busy_us; -static int unload_when_empty = 1; +static bool unload_when_empty = true; static int add_smi(struct smi_info *smi); static int try_smi_init(struct smi_info *smi); @@ -434,6 +440,13 @@ static void start_clear_flags(struct smi_info *smi_info) smi_info->si_state = SI_CLEARING_FLAGS; } +static void smi_mod_timer(struct smi_info *smi_info, unsigned long new_val) +{ + smi_info->last_timeout_jiffies = jiffies; + mod_timer(&smi_info->si_timer, new_val); + smi_info->timer_running = true; +} + /* * When we have a situtaion where we run out of memory and cannot * allocate messages, we just leave them in the BMC and run the system @@ -444,10 +457,9 @@ static inline void disable_si_irq(struct smi_info *smi_info) { if ((smi_info->irq) && (!smi_info->interrupt_disabled)) { start_disable_irq(smi_info); - smi_info->interrupt_disabled = 1; + smi_info->interrupt_disabled = true; if (!atomic_read(&smi_info->stop_operation)) - mod_timer(&smi_info->si_timer, - jiffies + SI_TIMEOUT_JIFFIES); + smi_mod_timer(smi_info, jiffies + SI_TIMEOUT_JIFFIES); } } @@ -455,7 +467,7 @@ static inline void enable_si_irq(struct smi_info *smi_info) { if ((smi_info->irq) && (smi_info->interrupt_disabled)) { start_enable_irq(smi_info); - smi_info->interrupt_disabled = 0; + smi_info->interrupt_disabled = false; } } @@ -700,7 +712,7 @@ static void handle_transaction_done(struct smi_info *smi_info) dev_warn(smi_info->dev, "Maybe ok, but ipmi might run very slowly.\n"); } else - smi_info->interrupt_disabled = 0; + smi_info->interrupt_disabled = false; smi_info->si_state = SI_NORMAL; break; } @@ -853,6 +865,19 @@ static enum si_sm_result smi_event_handler(struct smi_info *smi_info, return si_sm_result; } +static void check_start_timer_thread(struct smi_info *smi_info) +{ + if (smi_info->si_state == SI_NORMAL && smi_info->curr_msg == NULL) { + smi_mod_timer(smi_info, jiffies + SI_TIMEOUT_JIFFIES); + + if (smi_info->thread) + wake_up_process(smi_info->thread); + + start_next_msg(smi_info); + smi_event_handler(smi_info, 0); + } +} + static void sender(void *send_info, struct ipmi_smi_msg *msg, int priority) @@ -906,27 +931,11 @@ static void sender(void *send_info, else list_add_tail(&msg->link, &smi_info->xmit_msgs); - if (smi_info->si_state == SI_NORMAL && smi_info->curr_msg == NULL) { - /* - * last_timeout_jiffies is updated here to avoid - * smi_timeout() handler passing very large time_diff - * value to smi_event_handler() that causes - * the send command to abort. - */ - smi_info->last_timeout_jiffies = jiffies; - - mod_timer(&smi_info->si_timer, jiffies + SI_TIMEOUT_JIFFIES); - - if (smi_info->thread) - wake_up_process(smi_info->thread); - - start_next_msg(smi_info); - smi_event_handler(smi_info, 0); - } + check_start_timer_thread(smi_info); spin_unlock_irqrestore(&smi_info->si_lock, flags); } -static void set_run_to_completion(void *send_info, int i_run_to_completion) +static void set_run_to_completion(void *send_info, bool i_run_to_completion) { struct smi_info *smi_info = send_info; enum si_sm_result result; @@ -1004,6 +1013,17 @@ static int ipmi_thread(void *data) spin_lock_irqsave(&(smi_info->si_lock), flags); smi_result = smi_event_handler(smi_info, 0); + + /* + * If the driver is doing something, there is a possible + * race with the timer. If the timer handler see idle, + * and the thread here sees something else, the timer + * handler won't restart the timer even though it is + * required. So start it here if necessary. + */ + if (smi_result != SI_SM_IDLE && !smi_info->timer_running) + smi_mod_timer(smi_info, jiffies + SI_TIMEOUT_JIFFIES); + spin_unlock_irqrestore(&(smi_info->si_lock), flags); busy_wait = ipmi_thread_busy_wait(smi_result, smi_info, &busy_until); @@ -1011,9 +1031,15 @@ static int ipmi_thread(void *data) ; /* do nothing */ else if (smi_result == SI_SM_CALL_WITH_DELAY && busy_wait) schedule(); - else if (smi_result == SI_SM_IDLE) - schedule_timeout_interruptible(100); - else + else if (smi_result == SI_SM_IDLE) { + if (atomic_read(&smi_info->need_watch)) { + schedule_timeout_interruptible(100); + } else { + /* Wait to be woken up when we are needed. */ + __set_current_state(TASK_INTERRUPTIBLE); + schedule(); + } + } else schedule_timeout_interruptible(1); } return 0; @@ -1024,7 +1050,7 @@ static void poll(void *send_info) { struct smi_info *smi_info = send_info; unsigned long flags = 0; - int run_to_completion = smi_info->run_to_completion; + bool run_to_completion = smi_info->run_to_completion; /* * Make sure there is some delay in the poll loop so we can @@ -1049,6 +1075,17 @@ static void request_events(void *send_info) atomic_set(&smi_info->req_events, 1); } +static void set_need_watch(void *send_info, bool enable) +{ + struct smi_info *smi_info = send_info; + unsigned long flags; + + atomic_set(&smi_info->need_watch, enable); + spin_lock_irqsave(&smi_info->si_lock, flags); + check_start_timer_thread(smi_info); + spin_unlock_irqrestore(&smi_info->si_lock, flags); +} + static int initialized; static void smi_timeout(unsigned long data) @@ -1073,10 +1110,6 @@ static void smi_timeout(unsigned long data) * SI_USEC_PER_JIFFY); smi_result = smi_event_handler(smi_info, time_diff); - spin_unlock_irqrestore(&(smi_info->si_lock), flags); - - smi_info->last_timeout_jiffies = jiffies_now; - if ((smi_info->irq) && (!smi_info->interrupt_disabled)) { /* Running with interrupts, only do long timeouts. */ timeout = jiffies + SI_TIMEOUT_JIFFIES; @@ -1098,7 +1131,10 @@ static void smi_timeout(unsigned long data) do_mod_timer: if (smi_result != SI_SM_IDLE) - mod_timer(&(smi_info->si_timer), timeout); + smi_mod_timer(smi_info, timeout); + else + smi_info->timer_running = false; + spin_unlock_irqrestore(&(smi_info->si_lock), flags); } static irqreturn_t si_irq_handler(int irq, void *data) @@ -1146,8 +1182,7 @@ static int smi_start_processing(void *send_info, /* Set up the timer that drives the interface. */ setup_timer(&new_smi->si_timer, smi_timeout, (long)new_smi); - new_smi->last_timeout_jiffies = jiffies; - mod_timer(&new_smi->si_timer, jiffies + SI_TIMEOUT_JIFFIES); + smi_mod_timer(new_smi, jiffies + SI_TIMEOUT_JIFFIES); /* * Check if the user forcefully enabled the daemon. @@ -1188,7 +1223,7 @@ static int get_smi_info(void *send_info, struct ipmi_smi_info *data) return 0; } -static void set_maintenance_mode(void *send_info, int enable) +static void set_maintenance_mode(void *send_info, bool enable) { struct smi_info *smi_info = send_info; @@ -1202,6 +1237,7 @@ static struct ipmi_smi_handlers handlers = { .get_smi_info = get_smi_info, .sender = sender, .request_events = request_events, + .set_need_watch = set_need_watch, .set_maintenance_mode = set_maintenance_mode, .set_run_to_completion = set_run_to_completion, .poll = poll, @@ -1229,7 +1265,7 @@ static bool si_tryplatform = 1; #ifdef CONFIG_PCI static bool si_trypci = 1; #endif -static bool si_trydefaults = 1; +static bool si_trydefaults = IS_ENABLED(CONFIG_IPMI_SI_PROBE_DEFAULTS); static char *si_type[SI_MAX_PARMS]; #define MAX_SI_TYPE_STR 30 static char si_type_str[MAX_SI_TYPE_STR]; @@ -1328,7 +1364,7 @@ module_param_array(force_kipmid, int, &num_force_kipmid, 0); MODULE_PARM_DESC(force_kipmid, "Force the kipmi daemon to be enabled (1) or" " disabled(0). Normally the IPMI driver auto-detects" " this, but the value may be overridden by this parm."); -module_param(unload_when_empty, int, 0); +module_param(unload_when_empty, bool, 0); MODULE_PARM_DESC(unload_when_empty, "Unload the module if no interfaces are" " specified or found, default is 1. Setting to 0" " is useful for hot add of devices using hotmod."); @@ -3336,18 +3372,19 @@ static int try_smi_init(struct smi_info *new_smi) INIT_LIST_HEAD(&(new_smi->hp_xmit_msgs)); new_smi->curr_msg = NULL; atomic_set(&new_smi->req_events, 0); - new_smi->run_to_completion = 0; + new_smi->run_to_completion = false; for (i = 0; i < SI_NUM_STATS; i++) atomic_set(&new_smi->stats[i], 0); - new_smi->interrupt_disabled = 1; + new_smi->interrupt_disabled = true; atomic_set(&new_smi->stop_operation, 0); + atomic_set(&new_smi->need_watch, 0); new_smi->intf_num = smi_num; smi_num++; rv = try_enable_event_buffer(new_smi); if (rv == 0) - new_smi->has_event_buffer = 1; + new_smi->has_event_buffer = true; /* * Start clearing the flags before we enable interrupts or the @@ -3381,7 +3418,7 @@ static int try_smi_init(struct smi_info *new_smi) rv); goto out_err; } - new_smi->dev_registered = 1; + new_smi->dev_registered = true; } rv = ipmi_register_smi(&handlers, @@ -3430,7 +3467,7 @@ static int try_smi_init(struct smi_info *new_smi) wait_for_timer_and_thread(new_smi); out_err: - new_smi->interrupt_disabled = 1; + new_smi->interrupt_disabled = true; if (new_smi->intf) { ipmi_unregister_smi(new_smi->intf); @@ -3466,7 +3503,7 @@ static int try_smi_init(struct smi_info *new_smi) if (new_smi->dev_registered) { platform_device_unregister(new_smi->pdev); - new_smi->dev_registered = 0; + new_smi->dev_registered = false; } return rv; @@ -3521,14 +3558,14 @@ static int init_ipmi_si(void) printk(KERN_ERR PFX "Unable to register " "PCI driver: %d\n", rv); else - pci_registered = 1; + pci_registered = true; } #endif #ifdef CONFIG_ACPI if (si_tryacpi) { pnp_register_driver(&ipmi_pnp_driver); - pnp_registered = 1; + pnp_registered = true; } #endif @@ -3544,7 +3581,7 @@ static int init_ipmi_si(void) #ifdef CONFIG_PARISC register_parisc_driver(&ipmi_parisc_driver); - parisc_registered = 1; + parisc_registered = true; /* poking PC IO addresses will crash machine, don't do it */ si_trydefaults = 0; #endif diff --git a/drivers/char/pcmcia/Kconfig b/drivers/char/pcmcia/Kconfig index b27f534..8d3dfb0 100644 --- a/drivers/char/pcmcia/Kconfig +++ b/drivers/char/pcmcia/Kconfig @@ -15,7 +15,7 @@ config SYNCLINK_CS This driver may be built as a module ( = code which can be inserted in and removed from the running kernel whenever you want). - The module will be called synclinkmp. If you want to do that, say M + The module will be called synclink_cs. If you want to do that, say M here. config CARDMAN_4000 diff --git a/drivers/char/random.c b/drivers/char/random.c index 0a19d86..06cea7f 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -996,8 +996,11 @@ retry: ibytes = min_t(size_t, ibytes, have_bytes - reserved); if (ibytes < min) ibytes = 0; - entropy_count = max_t(int, 0, - entropy_count - (ibytes << (ENTROPY_SHIFT + 3))); + if (have_bytes >= ibytes + reserved) + entropy_count -= ibytes << (ENTROPY_SHIFT + 3); + else + entropy_count = reserved << (ENTROPY_SHIFT + 3); + if (cmpxchg(&r->entropy_count, orig, entropy_count) != orig) goto retry; diff --git a/drivers/char/tpm/tpm_ppi.c b/drivers/char/tpm/tpm_ppi.c index b3ea223..61dcc80 100644 --- a/drivers/char/tpm/tpm_ppi.c +++ b/drivers/char/tpm/tpm_ppi.c @@ -328,13 +328,11 @@ int tpm_add_ppi(struct kobject *parent) /* Cache TPM ACPI handle and version string */ acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX, ppi_callback, NULL, NULL, &tpm_ppi_handle); - if (tpm_ppi_handle == NULL) - return -ENODEV; - - return sysfs_create_group(parent, &ppi_attr_grp); + return tpm_ppi_handle ? sysfs_create_group(parent, &ppi_attr_grp) : 0; } void tpm_remove_ppi(struct kobject *parent) { - sysfs_remove_group(parent, &ppi_attr_grp); + if (tpm_ppi_handle) + sysfs_remove_group(parent, &ppi_attr_grp); } diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c index daea84c..a15ce4e 100644 --- a/drivers/char/ttyprintk.c +++ b/drivers/char/ttyprintk.c @@ -17,7 +17,7 @@ #include <linux/device.h> #include <linux/serial.h> #include <linux/tty.h> -#include <linux/export.h> +#include <linux/module.h> struct ttyprintk_port { struct tty_port port; @@ -210,10 +210,19 @@ static int __init ttyprintk_init(void) return 0; error: - tty_unregister_driver(ttyprintk_driver); put_tty_driver(ttyprintk_driver); tty_port_destroy(&tpk_port.port); - ttyprintk_driver = NULL; return ret; } + +static void __exit ttyprintk_exit(void) +{ + tty_unregister_driver(ttyprintk_driver); + put_tty_driver(ttyprintk_driver); + tty_port_destroy(&tpk_port.port); +} + device_initcall(ttyprintk_init); +module_exit(ttyprintk_exit); + +MODULE_LICENSE("GPL"); |