diff options
Diffstat (limited to 'drivers/clocksource')
| -rw-r--r-- | drivers/clocksource/Kconfig | 16 | ||||
| -rw-r--r-- | drivers/clocksource/arm_arch_timer.c | 51 | ||||
| -rw-r--r-- | drivers/clocksource/arm_global_timer.c | 3 | ||||
| -rw-r--r-- | drivers/clocksource/bcm2835_timer.c | 4 | ||||
| -rw-r--r-- | drivers/clocksource/clksrc-dbx500-prcmu.c | 5 | ||||
| -rw-r--r-- | drivers/clocksource/clksrc-of.c | 4 | ||||
| -rw-r--r-- | drivers/clocksource/dw_apb_timer_of.c | 16 | ||||
| -rw-r--r-- | drivers/clocksource/em_sti.c | 2 | ||||
| -rw-r--r-- | drivers/clocksource/exynos_mct.c | 10 | ||||
| -rw-r--r-- | drivers/clocksource/mxs_timer.c | 4 | ||||
| -rw-r--r-- | drivers/clocksource/nomadik-mtu.c | 4 | ||||
| -rw-r--r-- | drivers/clocksource/samsung_pwm_timer.c | 4 | ||||
| -rw-r--r-- | drivers/clocksource/tcb_clksrc.c | 61 | ||||
| -rw-r--r-- | drivers/clocksource/tegra20_timer.c | 8 | ||||
| -rw-r--r-- | drivers/clocksource/time-armada-370-xp.c | 4 | ||||
| -rw-r--r-- | drivers/clocksource/timer-prima2.c | 6 | ||||
| -rw-r--r-- | drivers/clocksource/vf_pit_timer.c | 4 | ||||
| -rw-r--r-- | drivers/clocksource/vt8500_timer.c | 2 |
18 files changed, 158 insertions, 50 deletions
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index 41c6946..5e940f8 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -26,6 +26,7 @@ config DW_APB_TIMER_OF config ARMADA_370_XP_TIMER bool + select CLKSRC_OF config ORION_TIMER select CLKSRC_OF @@ -74,6 +75,21 @@ config ARM_ARCH_TIMER bool select CLKSRC_OF if OF +config ARM_ARCH_TIMER_EVTSTREAM + bool "Support for ARM architected timer event stream generation" + default y if ARM_ARCH_TIMER + help + This option enables support for event stream generation based on + the ARM architected timer. It is used for waking up CPUs executing + the wfe instruction at a frequency represented as a power-of-2 + divisor of the clock rate. + The main use of the event stream is wfe-based timeouts of userspace + locking implementations. It might also be useful for imposing timeout + on wfe to safeguard against any programming errors in case an expected + event is not generated. + This must be disabled for hardware validation purposes to detect any + hardware anomalies of missing events. + config ARM_GLOBAL_TIMER bool select CLKSRC_OF if OF diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c index 5d52789..f655036 100644 --- a/drivers/clocksource/arm_arch_timer.c +++ b/drivers/clocksource/arm_arch_timer.c @@ -13,6 +13,7 @@ #include <linux/device.h> #include <linux/smp.h> #include <linux/cpu.h> +#include <linux/cpu_pm.h> #include <linux/clockchips.h> #include <linux/interrupt.h> #include <linux/of_irq.h> @@ -295,6 +296,19 @@ static void __arch_timer_setup(unsigned type, clockevents_config_and_register(clk, arch_timer_rate, 0xf, 0x7fffffff); } +static void arch_timer_configure_evtstream(void) +{ + int evt_stream_div, pos; + + /* Find the closest power of two to the divisor */ + evt_stream_div = arch_timer_rate / ARCH_TIMER_EVT_STREAM_FREQ; + pos = fls(evt_stream_div); + if (pos > 1 && !(evt_stream_div & (1 << (pos - 2)))) + pos--; + /* enable event stream */ + arch_timer_evtstrm_enable(min(pos, 15)); +} + static int arch_timer_setup(struct clock_event_device *clk) { __arch_timer_setup(ARCH_CP15_TIMER, clk); @@ -308,6 +322,8 @@ static int arch_timer_setup(struct clock_event_device *clk) } arch_counter_set_user_access(); + if (IS_ENABLED(CONFIG_ARM_ARCH_TIMER_EVTSTREAM)) + arch_timer_configure_evtstream(); return 0; } @@ -390,7 +406,7 @@ static struct clocksource clocksource_counter = { .rating = 400, .read = arch_counter_read, .mask = CLOCKSOURCE_MASK(56), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, + .flags = CLOCK_SOURCE_IS_CONTINUOUS | CLOCK_SOURCE_SUSPEND_NONSTOP, }; static struct cyclecounter cyclecounter = { @@ -461,6 +477,33 @@ static struct notifier_block arch_timer_cpu_nb = { .notifier_call = arch_timer_cpu_notify, }; +#ifdef CONFIG_CPU_PM +static unsigned int saved_cntkctl; +static int arch_timer_cpu_pm_notify(struct notifier_block *self, + unsigned long action, void *hcpu) +{ + if (action == CPU_PM_ENTER) + saved_cntkctl = arch_timer_get_cntkctl(); + else if (action == CPU_PM_ENTER_FAILED || action == CPU_PM_EXIT) + arch_timer_set_cntkctl(saved_cntkctl); + return NOTIFY_OK; +} + +static struct notifier_block arch_timer_cpu_pm_notifier = { + .notifier_call = arch_timer_cpu_pm_notify, +}; + +static int __init arch_timer_cpu_pm_init(void) +{ + return cpu_pm_register_notifier(&arch_timer_cpu_pm_notifier); +} +#else +static int __init arch_timer_cpu_pm_init(void) +{ + return 0; +} +#endif + static int __init arch_timer_register(void) { int err; @@ -509,11 +552,17 @@ static int __init arch_timer_register(void) if (err) goto out_free_irq; + err = arch_timer_cpu_pm_init(); + if (err) + goto out_unreg_notify; + /* Immediately configure the timer on the boot CPU */ arch_timer_setup(this_cpu_ptr(arch_timer_evt)); return 0; +out_unreg_notify: + unregister_cpu_notifier(&arch_timer_cpu_nb); out_free_irq: if (arch_timer_use_virtual) free_percpu_irq(arch_timer_ppi[VIRT_PPI], arch_timer_evt); diff --git a/drivers/clocksource/arm_global_timer.c b/drivers/clocksource/arm_global_timer.c index b66c1f3..c639b1a 100644 --- a/drivers/clocksource/arm_global_timer.c +++ b/drivers/clocksource/arm_global_timer.c @@ -169,7 +169,8 @@ static int gt_clockevents_init(struct clock_event_device *clk) int cpu = smp_processor_id(); clk->name = "arm_global_timer"; - clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; + clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT | + CLOCK_EVT_FEAT_PERCPU; clk->set_mode = gt_clockevent_set_mode; clk->set_next_event = gt_clockevent_set_next_event; clk->cpumask = cpumask_of(cpu); diff --git a/drivers/clocksource/bcm2835_timer.c b/drivers/clocksource/bcm2835_timer.c index 07ea7ce..26ed331 100644 --- a/drivers/clocksource/bcm2835_timer.c +++ b/drivers/clocksource/bcm2835_timer.c @@ -49,7 +49,7 @@ struct bcm2835_timer { static void __iomem *system_clock __read_mostly; -static u32 notrace bcm2835_sched_read(void) +static u64 notrace bcm2835_sched_read(void) { return readl_relaxed(system_clock); } @@ -110,7 +110,7 @@ static void __init bcm2835_timer_init(struct device_node *node) panic("Can't read clock-frequency"); system_clock = base + REG_COUNTER_LO; - setup_sched_clock(bcm2835_sched_read, 32, freq); + sched_clock_register(bcm2835_sched_read, 32, freq); clocksource_mmio_init(base + REG_COUNTER_LO, node->name, freq, 300, 32, clocksource_mmio_readl_up); diff --git a/drivers/clocksource/clksrc-dbx500-prcmu.c b/drivers/clocksource/clksrc-dbx500-prcmu.c index a9fd4ad..b375106 100644 --- a/drivers/clocksource/clksrc-dbx500-prcmu.c +++ b/drivers/clocksource/clksrc-dbx500-prcmu.c @@ -53,7 +53,7 @@ static struct clocksource clocksource_dbx500_prcmu = { #ifdef CONFIG_CLKSRC_DBX500_PRCMU_SCHED_CLOCK -static u32 notrace dbx500_prcmu_sched_clock_read(void) +static u64 notrace dbx500_prcmu_sched_clock_read(void) { if (unlikely(!clksrc_dbx500_timer_base)) return 0; @@ -81,8 +81,7 @@ void __init clksrc_dbx500_prcmu_init(void __iomem *base) clksrc_dbx500_timer_base + PRCMU_TIMER_REF); } #ifdef CONFIG_CLKSRC_DBX500_PRCMU_SCHED_CLOCK - setup_sched_clock(dbx500_prcmu_sched_clock_read, - 32, RATE_32K); + sched_clock_register(dbx500_prcmu_sched_clock_read, 32, RATE_32K); #endif clocksource_register_hz(&clocksource_dbx500_prcmu, RATE_32K); } diff --git a/drivers/clocksource/clksrc-of.c b/drivers/clocksource/clksrc-of.c index 37f5325..35639cf4 100644 --- a/drivers/clocksource/clksrc-of.c +++ b/drivers/clocksource/clksrc-of.c @@ -30,7 +30,11 @@ void __init clocksource_of_init(void) clocksource_of_init_fn init_func; for_each_matching_node_and_match(np, __clksrc_of_table, &match) { + if (!of_device_is_available(np)) + continue; + init_func = match->data; init_func(np); + of_node_put(np); } } diff --git a/drivers/clocksource/dw_apb_timer_of.c b/drivers/clocksource/dw_apb_timer_of.c index 4cbae4f..45ba8ae 100644 --- a/drivers/clocksource/dw_apb_timer_of.c +++ b/drivers/clocksource/dw_apb_timer_of.c @@ -23,7 +23,7 @@ #include <linux/clk.h> #include <linux/sched_clock.h> -static void timer_get_base_and_rate(struct device_node *np, +static void __init timer_get_base_and_rate(struct device_node *np, void __iomem **base, u32 *rate) { struct clk *timer_clk; @@ -55,11 +55,11 @@ static void timer_get_base_and_rate(struct device_node *np, try_clock_freq: if (of_property_read_u32(np, "clock-freq", rate) && - of_property_read_u32(np, "clock-frequency", rate)) + of_property_read_u32(np, "clock-frequency", rate)) panic("No clock nor clock-frequency property for %s", np->name); } -static void add_clockevent(struct device_node *event_timer) +static void __init add_clockevent(struct device_node *event_timer) { void __iomem *iobase; struct dw_apb_clock_event_device *ced; @@ -82,7 +82,7 @@ static void add_clockevent(struct device_node *event_timer) static void __iomem *sched_io_base; static u32 sched_rate; -static void add_clocksource(struct device_node *source_timer) +static void __init add_clocksource(struct device_node *source_timer) { void __iomem *iobase; struct dw_apb_clocksource *cs; @@ -106,7 +106,7 @@ static void add_clocksource(struct device_node *source_timer) sched_rate = rate; } -static u32 read_sched_clock(void) +static u64 read_sched_clock(void) { return __raw_readl(sched_io_base); } @@ -117,7 +117,7 @@ static const struct of_device_id sptimer_ids[] __initconst = { { /* Sentinel */ }, }; -static void init_sched_clock(void) +static void __init init_sched_clock(void) { struct device_node *sched_timer; @@ -128,7 +128,7 @@ static void init_sched_clock(void) of_node_put(sched_timer); } - setup_sched_clock(read_sched_clock, 32, sched_rate); + sched_clock_register(read_sched_clock, 32, sched_rate); } static int num_called; @@ -138,12 +138,10 @@ static void __init dw_apb_timer_init(struct device_node *timer) case 0: pr_debug("%s: found clockevent timer\n", __func__); add_clockevent(timer); - of_node_put(timer); break; case 1: pr_debug("%s: found clocksource timer\n", __func__); add_clocksource(timer); - of_node_put(timer); init_sched_clock(); break; default: diff --git a/drivers/clocksource/em_sti.c b/drivers/clocksource/em_sti.c index b9c81b7..3a5909c 100644 --- a/drivers/clocksource/em_sti.c +++ b/drivers/clocksource/em_sti.c @@ -301,7 +301,7 @@ static void em_sti_register_clockevent(struct em_sti_priv *p) ced->name = dev_name(&p->pdev->dev); ced->features = CLOCK_EVT_FEAT_ONESHOT; ced->rating = 200; - ced->cpumask = cpumask_of(0); + ced->cpumask = cpu_possible_mask; ced->set_next_event = em_sti_clock_event_next; ced->set_mode = em_sti_clock_event_mode; diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c index 5b34768..62b0de6 100644 --- a/drivers/clocksource/exynos_mct.c +++ b/drivers/clocksource/exynos_mct.c @@ -428,7 +428,6 @@ static int exynos4_local_timer_setup(struct clock_event_device *evt) evt->irq); return -EIO; } - irq_set_affinity(evt->irq, cpumask_of(cpu)); } else { enable_percpu_irq(mct_irqs[MCT_L0_IRQ], 0); } @@ -449,6 +448,7 @@ static int exynos4_mct_cpu_notify(struct notifier_block *self, unsigned long action, void *hcpu) { struct mct_clock_event_device *mevt; + unsigned int cpu; /* * Grab cpu pointer in each case to avoid spurious @@ -459,6 +459,12 @@ static int exynos4_mct_cpu_notify(struct notifier_block *self, mevt = this_cpu_ptr(&percpu_mct_tick); exynos4_local_timer_setup(&mevt->evt); break; + case CPU_ONLINE: + cpu = (unsigned long)hcpu; + if (mct_int_type == MCT_INT_SPI) + irq_set_affinity(mct_irqs[MCT_L0_IRQ + cpu], + cpumask_of(cpu)); + break; case CPU_DYING: mevt = this_cpu_ptr(&percpu_mct_tick); exynos4_local_timer_stop(&mevt->evt); @@ -500,6 +506,8 @@ static void __init exynos4_timer_resources(struct device_node *np, void __iomem &percpu_mct_tick); WARN(err, "MCT: can't request IRQ %d (%d)\n", mct_irqs[MCT_L0_IRQ], err); + } else { + irq_set_affinity(mct_irqs[MCT_L0_IRQ], cpumask_of(0)); } err = register_cpu_notifier(&exynos4_mct_cpu_nb); diff --git a/drivers/clocksource/mxs_timer.c b/drivers/clocksource/mxs_timer.c index 0f5e65f..445b68a 100644 --- a/drivers/clocksource/mxs_timer.c +++ b/drivers/clocksource/mxs_timer.c @@ -222,7 +222,7 @@ static struct clocksource clocksource_mxs = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -static u32 notrace mxs_read_sched_clock_v2(void) +static u64 notrace mxs_read_sched_clock_v2(void) { return ~readl_relaxed(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1)); } @@ -236,7 +236,7 @@ static int __init mxs_clocksource_init(struct clk *timer_clk) else { clocksource_mmio_init(mxs_timrot_base + HW_TIMROT_RUNNING_COUNTn(1), "mxs_timer", c, 200, 32, clocksource_mmio_readl_down); - setup_sched_clock(mxs_read_sched_clock_v2, 32, c); + sched_clock_register(mxs_read_sched_clock_v2, 32, c); } return 0; diff --git a/drivers/clocksource/nomadik-mtu.c b/drivers/clocksource/nomadik-mtu.c index 1b74bea..ed7b73b 100644 --- a/drivers/clocksource/nomadik-mtu.c +++ b/drivers/clocksource/nomadik-mtu.c @@ -76,7 +76,7 @@ static struct delay_timer mtu_delay_timer; * local implementation which uses the clocksource to get some * better resolution when scheduling the kernel. */ -static u32 notrace nomadik_read_sched_clock(void) +static u64 notrace nomadik_read_sched_clock(void) { if (unlikely(!mtu_base)) return 0; @@ -231,7 +231,7 @@ static void __init __nmdk_timer_init(void __iomem *base, int irq, "mtu_0"); #ifdef CONFIG_CLKSRC_NOMADIK_MTU_SCHED_CLOCK - setup_sched_clock(nomadik_read_sched_clock, 32, rate); + sched_clock_register(nomadik_read_sched_clock, 32, rate); #endif /* Timer 1 is used for events, register irq and clockevents */ diff --git a/drivers/clocksource/samsung_pwm_timer.c b/drivers/clocksource/samsung_pwm_timer.c index ab29476..85082e8 100644 --- a/drivers/clocksource/samsung_pwm_timer.c +++ b/drivers/clocksource/samsung_pwm_timer.c @@ -331,7 +331,7 @@ static struct clocksource samsung_clocksource = { * this wraps around for now, since it is just a relative time * stamp. (Inspired by U300 implementation.) */ -static u32 notrace samsung_read_sched_clock(void) +static u64 notrace samsung_read_sched_clock(void) { return samsung_clocksource_read(NULL); } @@ -357,7 +357,7 @@ static void __init samsung_clocksource_init(void) else pwm.source_reg = pwm.base + pwm.source_id * 0x0c + 0x14; - setup_sched_clock(samsung_read_sched_clock, + sched_clock_register(samsung_read_sched_clock, pwm.variant.bits, clock_rate); samsung_clocksource.mask = CLOCKSOURCE_MASK(pwm.variant.bits); diff --git a/drivers/clocksource/tcb_clksrc.c b/drivers/clocksource/tcb_clksrc.c index 8a61872..00fdd11 100644 --- a/drivers/clocksource/tcb_clksrc.c +++ b/drivers/clocksource/tcb_clksrc.c @@ -100,7 +100,7 @@ static void tc_mode(enum clock_event_mode m, struct clock_event_device *d) || tcd->clkevt.mode == CLOCK_EVT_MODE_ONESHOT) { __raw_writel(0xff, regs + ATMEL_TC_REG(2, IDR)); __raw_writel(ATMEL_TC_CLKDIS, regs + ATMEL_TC_REG(2, CCR)); - clk_disable(tcd->clk); + clk_disable_unprepare(tcd->clk); } switch (m) { @@ -109,7 +109,7 @@ static void tc_mode(enum clock_event_mode m, struct clock_event_device *d) * of oneshot, we get lower overhead and improved accuracy. */ case CLOCK_EVT_MODE_PERIODIC: - clk_enable(tcd->clk); + clk_prepare_enable(tcd->clk); /* slow clock, count up to RC, then irq and restart */ __raw_writel(timer_clock @@ -126,7 +126,7 @@ static void tc_mode(enum clock_event_mode m, struct clock_event_device *d) break; case CLOCK_EVT_MODE_ONESHOT: - clk_enable(tcd->clk); + clk_prepare_enable(tcd->clk); /* slow clock, count up to RC, then irq and stop */ __raw_writel(timer_clock | ATMEL_TC_CPCSTOP @@ -180,15 +180,22 @@ static irqreturn_t ch2_irq(int irq, void *handle) static struct irqaction tc_irqaction = { .name = "tc_clkevt", - .flags = IRQF_TIMER | IRQF_DISABLED, + .flags = IRQF_TIMER, .handler = ch2_irq, }; -static void __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx) +static int __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx) { + int ret; struct clk *t2_clk = tc->clk[2]; int irq = tc->irq[2]; + /* try to enable t2 clk to avoid future errors in mode change */ + ret = clk_prepare_enable(t2_clk); + if (ret) + return ret; + clk_disable_unprepare(t2_clk); + clkevt.regs = tc->regs; clkevt.clk = t2_clk; tc_irqaction.dev_id = &clkevt; @@ -197,16 +204,21 @@ static void __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx) clkevt.clkevt.cpumask = cpumask_of(0); + ret = setup_irq(irq, &tc_irqaction); + if (ret) + return ret; + clockevents_config_and_register(&clkevt.clkevt, 32768, 1, 0xffff); - setup_irq(irq, &tc_irqaction); + return ret; } #else /* !CONFIG_GENERIC_CLOCKEVENTS */ -static void __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx) +static int __init setup_clkevents(struct atmel_tc *tc, int clk32k_divisor_idx) { /* NOTHING */ + return 0; } #endif @@ -265,6 +277,7 @@ static int __init tcb_clksrc_init(void) int best_divisor_idx = -1; int clk32k_divisor_idx = -1; int i; + int ret; tc = atmel_tc_alloc(CONFIG_ATMEL_TCB_CLKSRC_BLOCK, clksrc.name); if (!tc) { @@ -275,7 +288,11 @@ static int __init tcb_clksrc_init(void) pdev = tc->pdev; t0_clk = tc->clk[0]; - clk_enable(t0_clk); + ret = clk_prepare_enable(t0_clk); + if (ret) { + pr_debug("can't enable T0 clk\n"); + goto err_free_tc; + } /* How fast will we be counting? Pick something over 5 MHz. */ rate = (u32) clk_get_rate(t0_clk); @@ -313,17 +330,39 @@ static int __init tcb_clksrc_init(void) /* tclib will give us three clocks no matter what the * underlying platform supports. */ - clk_enable(tc->clk[1]); + ret = clk_prepare_enable(tc->clk[1]); + if (ret) { + pr_debug("can't enable T1 clk\n"); + goto err_disable_t0; + } /* setup both channel 0 & 1 */ tcb_setup_dual_chan(tc, best_divisor_idx); } /* and away we go! */ - clocksource_register_hz(&clksrc, divided_rate); + ret = clocksource_register_hz(&clksrc, divided_rate); + if (ret) + goto err_disable_t1; /* channel 2: periodic and oneshot timer support */ - setup_clkevents(tc, clk32k_divisor_idx); + ret = setup_clkevents(tc, clk32k_divisor_idx); + if (ret) + goto err_unregister_clksrc; return 0; + +err_unregister_clksrc: + clocksource_unregister(&clksrc); + +err_disable_t1: + if (!tc->tcb_config || tc->tcb_config->counter_width != 32) + clk_disable_unprepare(tc->clk[1]); + +err_disable_t0: + clk_disable_unprepare(t0_clk); + +err_free_tc: + atmel_tc_free(tc); + return ret; } arch_initcall(tcb_clksrc_init); diff --git a/drivers/clocksource/tegra20_timer.c b/drivers/clocksource/tegra20_timer.c index 9396170..6428492 100644 --- a/drivers/clocksource/tegra20_timer.c +++ b/drivers/clocksource/tegra20_timer.c @@ -98,7 +98,7 @@ static struct clock_event_device tegra_clockevent = { .set_mode = tegra_timer_set_mode, }; -static u32 notrace tegra_read_sched_clock(void) +static u64 notrace tegra_read_sched_clock(void) { return timer_readl(TIMERUS_CNTR_1US); } @@ -181,8 +181,6 @@ static void __init tegra20_init_timer(struct device_node *np) rate = clk_get_rate(clk); } - of_node_put(np); - switch (rate) { case 12000000: timer_writel(0x000b, TIMERUS_USEC_CFG); @@ -200,7 +198,7 @@ static void __init tegra20_init_timer(struct device_node *np) WARN(1, "Unknown clock rate"); } - setup_sched_clock(tegra_read_sched_clock, 32, 1000000); + sched_clock_register(tegra_read_sched_clock, 32, 1000000); if (clocksource_mmio_init(timer_reg_base + TIMERUS_CNTR_1US, "timer_us", 1000000, 300, 32, clocksource_mmio_readl_up)) { @@ -241,8 +239,6 @@ static void __init tegra20_init_rtc(struct device_node *np) else clk_prepare_enable(clk); - of_node_put(np); - register_persistent_clock(NULL, tegra_read_persistent_clock); } CLOCKSOURCE_OF_DECLARE(tegra20_rtc, "nvidia,tegra20-rtc", tegra20_init_rtc); diff --git a/drivers/clocksource/time-armada-370-xp.c b/drivers/clocksource/time-armada-370-xp.c index 0198504..d8e47e5 100644 --- a/drivers/clocksource/time-armada-370-xp.c +++ b/drivers/clocksource/time-armada-370-xp.c @@ -96,7 +96,7 @@ static void local_timer_ctrl_clrset(u32 clr, u32 set) local_base + TIMER_CTRL_OFF); } -static u32 notrace armada_370_xp_read_sched_clock(void) +static u64 notrace armada_370_xp_read_sched_clock(void) { return ~readl(timer_base + TIMER0_VAL_OFF); } @@ -258,7 +258,7 @@ static void __init armada_370_xp_timer_common_init(struct device_node *np) /* * Set scale and timer for sched_clock. */ - setup_sched_clock(armada_370_xp_read_sched_clock, 32, timer_clk); + sched_clock_register(armada_370_xp_read_sched_clock, 32, timer_clk); /* * Setup free-running clocksource timer (interrupts diff --git a/drivers/clocksource/timer-prima2.c b/drivers/clocksource/timer-prima2.c index ef3cfb2..8a492d3 100644 --- a/drivers/clocksource/timer-prima2.c +++ b/drivers/clocksource/timer-prima2.c @@ -165,9 +165,9 @@ static struct irqaction sirfsoc_timer_irq = { }; /* Overwrite weak default sched_clock with more precise one */ -static u32 notrace sirfsoc_read_sched_clock(void) +static u64 notrace sirfsoc_read_sched_clock(void) { - return (u32)(sirfsoc_timer_read(NULL) & 0xffffffff); + return sirfsoc_timer_read(NULL); } static void __init sirfsoc_clockevent_init(void) @@ -206,7 +206,7 @@ static void __init sirfsoc_prima2_timer_init(struct device_node *np) BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE)); - setup_sched_clock(sirfsoc_read_sched_clock, 32, CLOCK_TICK_RATE); + sched_clock_register(sirfsoc_read_sched_clock, 64, CLOCK_TICK_RATE); BUG_ON(setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq)); diff --git a/drivers/clocksource/vf_pit_timer.c b/drivers/clocksource/vf_pit_timer.c index 587e020..02821b0 100644 --- a/drivers/clocksource/vf_pit_timer.c +++ b/drivers/clocksource/vf_pit_timer.c @@ -52,7 +52,7 @@ static inline void pit_irq_acknowledge(void) __raw_writel(PITTFLG_TIF, clkevt_base + PITTFLG); } -static unsigned int pit_read_sched_clock(void) +static u64 pit_read_sched_clock(void) { return __raw_readl(clksrc_base + PITCVAL); } @@ -64,7 +64,7 @@ static int __init pit_clocksource_init(unsigned long rate) __raw_writel(~0UL, clksrc_base + PITLDVAL); __raw_writel(PITTCTRL_TEN, clksrc_base + PITTCTRL); - setup_sched_clock(pit_read_sched_clock, 32, rate); + sched_clock_register(pit_read_sched_clock, 32, rate); return clocksource_mmio_init(clksrc_base + PITCVAL, "vf-pit", rate, 300, 32, clocksource_mmio_readl_down); } diff --git a/drivers/clocksource/vt8500_timer.c b/drivers/clocksource/vt8500_timer.c index 64f553f..ad3c0e8 100644 --- a/drivers/clocksource/vt8500_timer.c +++ b/drivers/clocksource/vt8500_timer.c @@ -137,14 +137,12 @@ static void __init vt8500_timer_init(struct device_node *np) if (!regbase) { pr_err("%s: Missing iobase description in Device Tree\n", __func__); - of_node_put(np); return; } timer_irq = irq_of_parse_and_map(np, 0); if (!timer_irq) { pr_err("%s: Missing irq description in Device Tree\n", __func__); - of_node_put(np); return; } |