diff options
Diffstat (limited to 'drivers/cpufreq')
| -rw-r--r-- | drivers/cpufreq/Kconfig.arm | 49 | ||||
| -rw-r--r-- | drivers/cpufreq/Makefile | 4 | ||||
| -rw-r--r-- | drivers/cpufreq/exynos-cpufreq.c | 237 | ||||
| -rw-r--r-- | drivers/cpufreq/exynos-cpufreq.h | 89 | ||||
| -rw-r--r-- | drivers/cpufreq/exynos4x12-cpufreq.c | 236 | ||||
| -rw-r--r-- | drivers/cpufreq/exynos5250-cpufreq.c | 210 |
6 files changed, 0 insertions, 825 deletions
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index cc8a71c..4937fe4 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -24,55 +24,6 @@ config ARM_VEXPRESS_SPC_CPUFREQ This add the CPUfreq driver support for Versatile Express big.LITTLE platforms using SPC for power management. - -config ARM_EXYNOS_CPUFREQ - tristate "SAMSUNG EXYNOS CPUfreq Driver" - depends on CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412 || SOC_EXYNOS5250 - depends on THERMAL - help - This adds the CPUFreq driver for Samsung EXYNOS platforms. - Supported SoC versions are: - Exynos4210, Exynos4212, Exynos4412, and Exynos5250. - - If in doubt, say N. - -config ARM_EXYNOS4X12_CPUFREQ - bool "SAMSUNG EXYNOS4x12" - depends on SOC_EXYNOS4212 || SOC_EXYNOS4412 - depends on ARM_EXYNOS_CPUFREQ - default y - help - This adds the CPUFreq driver for Samsung EXYNOS4X12 - SoC (EXYNOS4212 or EXYNOS4412). - - If in doubt, say N. - -config ARM_EXYNOS5250_CPUFREQ - bool "SAMSUNG EXYNOS5250" - depends on SOC_EXYNOS5250 - depends on ARM_EXYNOS_CPUFREQ - default y - help - This adds the CPUFreq driver for Samsung EXYNOS5250 - SoC. - - If in doubt, say N. - -config ARM_EXYNOS_CPU_FREQ_BOOST_SW - bool "EXYNOS Frequency Overclocking - Software" - depends on ARM_EXYNOS_CPUFREQ && THERMAL - select CPU_FREQ_BOOST_SW - select EXYNOS_THERMAL - help - This driver supports software managed overclocking (BOOST). - It allows usage of special frequencies for Samsung Exynos - processors if thermal conditions are appropriate. - - It requires, for safe operation, thermal framework with properly - defined trip points. - - If in doubt, say N. - config ARM_EXYNOS5440_CPUFREQ tristate "SAMSUNG EXYNOS5440" depends on SOC_EXYNOS5440 diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 2169bf7..6d8186d 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -52,10 +52,6 @@ obj-$(CONFIG_ARM_DT_BL_CPUFREQ) += arm_big_little_dt.o obj-$(CONFIG_ARCH_DAVINCI) += davinci-cpufreq.o obj-$(CONFIG_UX500_SOC_DB8500) += dbx500-cpufreq.o -obj-$(CONFIG_ARM_EXYNOS_CPUFREQ) += arm-exynos-cpufreq.o -arm-exynos-cpufreq-y := exynos-cpufreq.o -arm-exynos-cpufreq-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o -arm-exynos-cpufreq-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) += exynos5250-cpufreq.o obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o obj-$(CONFIG_ARM_HISI_ACPU_CPUFREQ) += hisi-acpu-cpufreq.o diff --git a/drivers/cpufreq/exynos-cpufreq.c b/drivers/cpufreq/exynos-cpufreq.c deleted file mode 100644 index ae5b2bd..0000000 --- a/drivers/cpufreq/exynos-cpufreq.c +++ /dev/null @@ -1,237 +0,0 @@ -/* - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS - CPU frequency scaling support for EXYNOS series - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/regulator/consumer.h> -#include <linux/cpufreq.h> -#include <linux/platform_device.h> -#include <linux/of.h> -#include <linux/cpu_cooling.h> -#include <linux/cpu.h> - -#include "exynos-cpufreq.h" - -static struct exynos_dvfs_info *exynos_info; -static struct thermal_cooling_device *cdev; -static struct regulator *arm_regulator; -static unsigned int locking_frequency; - -static int exynos_cpufreq_get_index(unsigned int freq) -{ - struct cpufreq_frequency_table *freq_table = exynos_info->freq_table; - struct cpufreq_frequency_table *pos; - - cpufreq_for_each_entry(pos, freq_table) - if (pos->frequency == freq) - break; - - if (pos->frequency == CPUFREQ_TABLE_END) - return -EINVAL; - - return pos - freq_table; -} - -static int exynos_cpufreq_scale(unsigned int target_freq) -{ - struct cpufreq_frequency_table *freq_table = exynos_info->freq_table; - unsigned int *volt_table = exynos_info->volt_table; - struct cpufreq_policy *policy = cpufreq_cpu_get(0); - unsigned int arm_volt, safe_arm_volt = 0; - unsigned int mpll_freq_khz = exynos_info->mpll_freq_khz; - struct device *dev = exynos_info->dev; - unsigned int old_freq; - int index, old_index; - int ret = 0; - - old_freq = policy->cur; - - /* - * The policy max have been changed so that we cannot get proper - * old_index with cpufreq_frequency_table_target(). Thus, ignore - * policy and get the index from the raw frequency table. - */ - old_index = exynos_cpufreq_get_index(old_freq); - if (old_index < 0) { - ret = old_index; - goto out; - } - - index = exynos_cpufreq_get_index(target_freq); - if (index < 0) { - ret = index; - goto out; - } - - /* - * ARM clock source will be changed APLL to MPLL temporary - * To support this level, need to control regulator for - * required voltage level - */ - if (exynos_info->need_apll_change != NULL) { - if (exynos_info->need_apll_change(old_index, index) && - (freq_table[index].frequency < mpll_freq_khz) && - (freq_table[old_index].frequency < mpll_freq_khz)) - safe_arm_volt = volt_table[exynos_info->pll_safe_idx]; - } - arm_volt = volt_table[index]; - - /* When the new frequency is higher than current frequency */ - if ((target_freq > old_freq) && !safe_arm_volt) { - /* Firstly, voltage up to increase frequency */ - ret = regulator_set_voltage(arm_regulator, arm_volt, arm_volt); - if (ret) { - dev_err(dev, "failed to set cpu voltage to %d\n", - arm_volt); - return ret; - } - } - - if (safe_arm_volt) { - ret = regulator_set_voltage(arm_regulator, safe_arm_volt, - safe_arm_volt); - if (ret) { - dev_err(dev, "failed to set cpu voltage to %d\n", - safe_arm_volt); - return ret; - } - } - - exynos_info->set_freq(old_index, index); - - /* When the new frequency is lower than current frequency */ - if ((target_freq < old_freq) || - ((target_freq > old_freq) && safe_arm_volt)) { - /* down the voltage after frequency change */ - ret = regulator_set_voltage(arm_regulator, arm_volt, - arm_volt); - if (ret) { - dev_err(dev, "failed to set cpu voltage to %d\n", - arm_volt); - goto out; - } - } - -out: - cpufreq_cpu_put(policy); - - return ret; -} - -static int exynos_target(struct cpufreq_policy *policy, unsigned int index) -{ - return exynos_cpufreq_scale(exynos_info->freq_table[index].frequency); -} - -static int exynos_cpufreq_cpu_init(struct cpufreq_policy *policy) -{ - policy->clk = exynos_info->cpu_clk; - policy->suspend_freq = locking_frequency; - return cpufreq_generic_init(policy, exynos_info->freq_table, 100000); -} - -static struct cpufreq_driver exynos_driver = { - .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK, - .verify = cpufreq_generic_frequency_table_verify, - .target_index = exynos_target, - .get = cpufreq_generic_get, - .init = exynos_cpufreq_cpu_init, - .name = "exynos_cpufreq", - .attr = cpufreq_generic_attr, -#ifdef CONFIG_ARM_EXYNOS_CPU_FREQ_BOOST_SW - .boost_supported = true, -#endif -#ifdef CONFIG_PM - .suspend = cpufreq_generic_suspend, -#endif -}; - -static int exynos_cpufreq_probe(struct platform_device *pdev) -{ - struct device_node *cpu0; - int ret = -EINVAL; - - exynos_info = kzalloc(sizeof(*exynos_info), GFP_KERNEL); - if (!exynos_info) - return -ENOMEM; - - exynos_info->dev = &pdev->dev; - - if (of_machine_is_compatible("samsung,exynos4212")) { - exynos_info->type = EXYNOS_SOC_4212; - ret = exynos4x12_cpufreq_init(exynos_info); - } else if (of_machine_is_compatible("samsung,exynos4412")) { - exynos_info->type = EXYNOS_SOC_4412; - ret = exynos4x12_cpufreq_init(exynos_info); - } else if (of_machine_is_compatible("samsung,exynos5250")) { - exynos_info->type = EXYNOS_SOC_5250; - ret = exynos5250_cpufreq_init(exynos_info); - } else { - pr_err("%s: Unknown SoC type\n", __func__); - return -ENODEV; - } - - if (ret) - goto err_vdd_arm; - - if (exynos_info->set_freq == NULL) { - dev_err(&pdev->dev, "No set_freq function (ERR)\n"); - goto err_vdd_arm; - } - - arm_regulator = regulator_get(NULL, "vdd_arm"); - if (IS_ERR(arm_regulator)) { - dev_err(&pdev->dev, "failed to get resource vdd_arm\n"); - goto err_vdd_arm; - } - - /* Done here as we want to capture boot frequency */ - locking_frequency = clk_get_rate(exynos_info->cpu_clk) / 1000; - - ret = cpufreq_register_driver(&exynos_driver); - if (ret) - goto err_cpufreq_reg; - - cpu0 = of_get_cpu_node(0, NULL); - if (!cpu0) { - pr_err("failed to find cpu0 node\n"); - return 0; - } - - if (of_find_property(cpu0, "#cooling-cells", NULL)) { - cdev = of_cpufreq_cooling_register(cpu0, - cpu_present_mask); - if (IS_ERR(cdev)) - pr_err("running cpufreq without cooling device: %ld\n", - PTR_ERR(cdev)); - } - - return 0; - -err_cpufreq_reg: - dev_err(&pdev->dev, "failed to register cpufreq driver\n"); - regulator_put(arm_regulator); -err_vdd_arm: - kfree(exynos_info); - return -EINVAL; -} - -static struct platform_driver exynos_cpufreq_platdrv = { - .driver = { - .name = "exynos-cpufreq", - }, - .probe = exynos_cpufreq_probe, -}; -module_platform_driver(exynos_cpufreq_platdrv); diff --git a/drivers/cpufreq/exynos-cpufreq.h b/drivers/cpufreq/exynos-cpufreq.h deleted file mode 100644 index a3855e4..0000000 --- a/drivers/cpufreq/exynos-cpufreq.h +++ /dev/null @@ -1,89 +0,0 @@ -/* - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS - CPUFreq support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -enum cpufreq_level_index { - L0, L1, L2, L3, L4, - L5, L6, L7, L8, L9, - L10, L11, L12, L13, L14, - L15, L16, L17, L18, L19, - L20, -}; - -enum exynos_soc_type { - EXYNOS_SOC_4212, - EXYNOS_SOC_4412, - EXYNOS_SOC_5250, -}; - -#define APLL_FREQ(f, a0, a1, a2, a3, a4, a5, a6, a7, b0, b1, b2, m, p, s) \ - { \ - .freq = (f) * 1000, \ - .clk_div_cpu0 = ((a0) | (a1) << 4 | (a2) << 8 | (a3) << 12 | \ - (a4) << 16 | (a5) << 20 | (a6) << 24 | (a7) << 28), \ - .clk_div_cpu1 = (b0 << 0 | b1 << 4 | b2 << 8), \ - .mps = ((m) << 16 | (p) << 8 | (s)), \ - } - -struct apll_freq { - unsigned int freq; - u32 clk_div_cpu0; - u32 clk_div_cpu1; - u32 mps; -}; - -struct exynos_dvfs_info { - enum exynos_soc_type type; - struct device *dev; - unsigned long mpll_freq_khz; - unsigned int pll_safe_idx; - struct clk *cpu_clk; - unsigned int *volt_table; - struct cpufreq_frequency_table *freq_table; - void (*set_freq)(unsigned int, unsigned int); - bool (*need_apll_change)(unsigned int, unsigned int); - void __iomem *cmu_regs; -}; - -#ifdef CONFIG_ARM_EXYNOS4X12_CPUFREQ -extern int exynos4x12_cpufreq_init(struct exynos_dvfs_info *); -#else -static inline int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info) -{ - return -EOPNOTSUPP; -} -#endif -#ifdef CONFIG_ARM_EXYNOS5250_CPUFREQ -extern int exynos5250_cpufreq_init(struct exynos_dvfs_info *); -#else -static inline int exynos5250_cpufreq_init(struct exynos_dvfs_info *info) -{ - return -EOPNOTSUPP; -} -#endif - -#define EXYNOS4_CLKSRC_CPU 0x14200 -#define EXYNOS4_CLKMUX_STATCPU 0x14400 - -#define EXYNOS4_CLKDIV_CPU 0x14500 -#define EXYNOS4_CLKDIV_CPU1 0x14504 -#define EXYNOS4_CLKDIV_STATCPU 0x14600 -#define EXYNOS4_CLKDIV_STATCPU1 0x14604 - -#define EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT (16) -#define EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK (0x7 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT) - -#define EXYNOS5_APLL_LOCK 0x00000 -#define EXYNOS5_APLL_CON0 0x00100 -#define EXYNOS5_CLKMUX_STATCPU 0x00400 -#define EXYNOS5_CLKDIV_CPU0 0x00500 -#define EXYNOS5_CLKDIV_CPU1 0x00504 -#define EXYNOS5_CLKDIV_STATCPU0 0x00600 -#define EXYNOS5_CLKDIV_STATCPU1 0x00604 diff --git a/drivers/cpufreq/exynos4x12-cpufreq.c b/drivers/cpufreq/exynos4x12-cpufreq.c deleted file mode 100644 index 9e78a85..0000000 --- a/drivers/cpufreq/exynos4x12-cpufreq.c +++ /dev/null @@ -1,236 +0,0 @@ -/* - * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4X12 - CPU frequency scaling support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/cpufreq.h> -#include <linux/of.h> -#include <linux/of_address.h> - -#include "exynos-cpufreq.h" - -static struct clk *cpu_clk; -static struct clk *moutcore; -static struct clk *mout_mpll; -static struct clk *mout_apll; -static struct exynos_dvfs_info *cpufreq; - -static unsigned int exynos4x12_volt_table[] = { - 1350000, 1287500, 1250000, 1187500, 1137500, 1087500, 1037500, - 1000000, 987500, 975000, 950000, 925000, 900000, 900000 -}; - -static struct cpufreq_frequency_table exynos4x12_freq_table[] = { - {CPUFREQ_BOOST_FREQ, L0, 1500 * 1000}, - {0, L1, 1400 * 1000}, - {0, L2, 1300 * 1000}, - {0, L3, 1200 * 1000}, - {0, L4, 1100 * 1000}, - {0, L5, 1000 * 1000}, - {0, L6, 900 * 1000}, - {0, L7, 800 * 1000}, - {0, L8, 700 * 1000}, - {0, L9, 600 * 1000}, - {0, L10, 500 * 1000}, - {0, L11, 400 * 1000}, - {0, L12, 300 * 1000}, - {0, L13, 200 * 1000}, - {0, 0, CPUFREQ_TABLE_END}, -}; - -static struct apll_freq *apll_freq_4x12; - -static struct apll_freq apll_freq_4212[] = { - /* - * values: - * freq - * clock divider for CORE, COREM0, COREM1, PERIPH, ATB, PCLK_DBG, APLL, CORE2 - * clock divider for COPY, HPM, RESERVED - * PLL M, P, S - */ - APLL_FREQ(1500, 0, 3, 7, 0, 6, 1, 2, 0, 6, 2, 0, 250, 4, 0), - APLL_FREQ(1400, 0, 3, 7, 0, 6, 1, 2, 0, 6, 2, 0, 175, 3, 0), - APLL_FREQ(1300, 0, 3, 7, 0, 5, 1, 2, 0, 5, 2, 0, 325, 6, 0), - APLL_FREQ(1200, 0, 3, 7, 0, 5, 1, 2, 0, 5, 2, 0, 200, 4, 0), - APLL_FREQ(1100, 0, 3, 6, 0, 4, 1, 2, 0, 4, 2, 0, 275, 6, 0), - APLL_FREQ(1000, 0, 2, 5, 0, 4, 1, 1, 0, 4, 2, 0, 125, 3, 0), - APLL_FREQ(900, 0, 2, 5, 0, 3, 1, 1, 0, 3, 2, 0, 150, 4, 0), - APLL_FREQ(800, 0, 2, 5, 0, 3, 1, 1, 0, 3, 2, 0, 100, 3, 0), - APLL_FREQ(700, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 175, 3, 1), - APLL_FREQ(600, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 200, 4, 1), - APLL_FREQ(500, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 125, 3, 1), - APLL_FREQ(400, 0, 2, 4, 0, 3, 1, 1, 0, 3, 2, 0, 100, 3, 1), - APLL_FREQ(300, 0, 2, 4, 0, 2, 1, 1, 0, 3, 2, 0, 200, 4, 2), - APLL_FREQ(200, 0, 1, 3, 0, 1, 1, 1, 0, 3, 2, 0, 100, 3, 2), -}; - -static struct apll_freq apll_freq_4412[] = { - /* - * values: - * freq - * clock divider for CORE, COREM0, COREM1, PERIPH, ATB, PCLK_DBG, APLL, CORE2 - * clock divider for COPY, HPM, CORES - * PLL M, P, S - */ - APLL_FREQ(1500, 0, 3, 7, 0, 6, 1, 2, 0, 6, 0, 7, 250, 4, 0), - APLL_FREQ(1400, 0, 3, 7, 0, 6, 1, 2, 0, 6, 0, 6, 175, 3, 0), - APLL_FREQ(1300, 0, 3, 7, 0, 5, 1, 2, 0, 5, 0, 6, 325, 6, 0), - APLL_FREQ(1200, 0, 3, 7, 0, 5, 1, 2, 0, 5, 0, 5, 200, 4, 0), - APLL_FREQ(1100, 0, 3, 6, 0, 4, 1, 2, 0, 4, 0, 5, 275, 6, 0), - APLL_FREQ(1000, 0, 2, 5, 0, 4, 1, 1, 0, 4, 0, 4, 125, 3, 0), - APLL_FREQ(900, 0, 2, 5, 0, 3, 1, 1, 0, 3, 0, 4, 150, 4, 0), - APLL_FREQ(800, 0, 2, 5, 0, 3, 1, 1, 0, 3, 0, 3, 100, 3, 0), - APLL_FREQ(700, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 3, 175, 3, 1), - APLL_FREQ(600, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 2, 200, 4, 1), - APLL_FREQ(500, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 2, 125, 3, 1), - APLL_FREQ(400, 0, 2, 4, 0, 3, 1, 1, 0, 3, 0, 1, 100, 3, 1), - APLL_FREQ(300, 0, 2, 4, 0, 2, 1, 1, 0, 3, 0, 1, 200, 4, 2), - APLL_FREQ(200, 0, 1, 3, 0, 1, 1, 1, 0, 3, 0, 0, 100, 3, 2), -}; - -static void exynos4x12_set_clkdiv(unsigned int div_index) -{ - unsigned int tmp; - - /* Change Divider - CPU0 */ - - tmp = apll_freq_4x12[div_index].clk_div_cpu0; - - __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU); - - while (__raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU) - & 0x11111111) - cpu_relax(); - - /* Change Divider - CPU1 */ - tmp = apll_freq_4x12[div_index].clk_div_cpu1; - - __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS4_CLKDIV_CPU1); - - do { - cpu_relax(); - tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKDIV_STATCPU1); - } while (tmp != 0x0); -} - -static void exynos4x12_set_apll(unsigned int index) -{ - unsigned int tmp, freq = apll_freq_4x12[index].freq; - - /* MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */ - clk_set_parent(moutcore, mout_mpll); - - do { - cpu_relax(); - tmp = (__raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU) - >> EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT); - tmp &= 0x7; - } while (tmp != 0x2); - - clk_set_rate(mout_apll, freq * 1000); - - /* MUX_CORE_SEL = APLL */ - clk_set_parent(moutcore, mout_apll); - - do { - cpu_relax(); - tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS4_CLKMUX_STATCPU); - tmp &= EXYNOS4_CLKMUX_STATCPU_MUXCORE_MASK; - } while (tmp != (0x1 << EXYNOS4_CLKSRC_CPU_MUXCORE_SHIFT)); -} - -static void exynos4x12_set_frequency(unsigned int old_index, - unsigned int new_index) -{ - if (old_index > new_index) { - exynos4x12_set_clkdiv(new_index); - exynos4x12_set_apll(new_index); - } else if (old_index < new_index) { - exynos4x12_set_apll(new_index); - exynos4x12_set_clkdiv(new_index); - } -} - -int exynos4x12_cpufreq_init(struct exynos_dvfs_info *info) -{ - struct device_node *np; - unsigned long rate; - - /* - * HACK: This is a temporary workaround to get access to clock - * controller registers directly and remove static mappings and - * dependencies on platform headers. It is necessary to enable - * Exynos multi-platform support and will be removed together with - * this whole driver as soon as Exynos gets migrated to use - * cpufreq-dt driver. - */ - np = of_find_compatible_node(NULL, NULL, "samsung,exynos4412-clock"); - if (!np) { - pr_err("%s: failed to find clock controller DT node\n", - __func__); - return -ENODEV; - } - - info->cmu_regs = of_iomap(np, 0); - if (!info->cmu_regs) { - pr_err("%s: failed to map CMU registers\n", __func__); - return -EFAULT; - } - - cpu_clk = clk_get(NULL, "armclk"); - if (IS_ERR(cpu_clk)) - return PTR_ERR(cpu_clk); - - moutcore = clk_get(NULL, "moutcore"); - if (IS_ERR(moutcore)) - goto err_moutcore; - - mout_mpll = clk_get(NULL, "mout_mpll"); - if (IS_ERR(mout_mpll)) - goto err_mout_mpll; - - rate = clk_get_rate(mout_mpll) / 1000; - - mout_apll = clk_get(NULL, "mout_apll"); - if (IS_ERR(mout_apll)) - goto err_mout_apll; - - if (info->type == EXYNOS_SOC_4212) - apll_freq_4x12 = apll_freq_4212; - else - apll_freq_4x12 = apll_freq_4412; - - info->mpll_freq_khz = rate; - /* 800Mhz */ - info->pll_safe_idx = L7; - info->cpu_clk = cpu_clk; - info->volt_table = exynos4x12_volt_table; - info->freq_table = exynos4x12_freq_table; - info->set_freq = exynos4x12_set_frequency; - - cpufreq = info; - - return 0; - -err_mout_apll: - clk_put(mout_mpll); -err_mout_mpll: - clk_put(moutcore); -err_moutcore: - clk_put(cpu_clk); - - pr_debug("%s: failed initialization\n", __func__); - return -EINVAL; -} diff --git a/drivers/cpufreq/exynos5250-cpufreq.c b/drivers/cpufreq/exynos5250-cpufreq.c deleted file mode 100644 index 3eafdc7..0000000 --- a/drivers/cpufreq/exynos5250-cpufreq.c +++ /dev/null @@ -1,210 +0,0 @@ -/* - * Copyright (c) 2010-20122Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS5250 - CPU frequency scaling support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/cpufreq.h> -#include <linux/of.h> -#include <linux/of_address.h> - -#include "exynos-cpufreq.h" - -static struct clk *cpu_clk; -static struct clk *moutcore; -static struct clk *mout_mpll; -static struct clk *mout_apll; -static struct exynos_dvfs_info *cpufreq; - -static unsigned int exynos5250_volt_table[] = { - 1300000, 1250000, 1225000, 1200000, 1150000, - 1125000, 1100000, 1075000, 1050000, 1025000, - 1012500, 1000000, 975000, 950000, 937500, - 925000 -}; - -static struct cpufreq_frequency_table exynos5250_freq_table[] = { - {0, L0, 1700 * 1000}, - {0, L1, 1600 * 1000}, - {0, L2, 1500 * 1000}, - {0, L3, 1400 * 1000}, - {0, L4, 1300 * 1000}, - {0, L5, 1200 * 1000}, - {0, L6, 1100 * 1000}, - {0, L7, 1000 * 1000}, - {0, L8, 900 * 1000}, - {0, L9, 800 * 1000}, - {0, L10, 700 * 1000}, - {0, L11, 600 * 1000}, - {0, L12, 500 * 1000}, - {0, L13, 400 * 1000}, - {0, L14, 300 * 1000}, - {0, L15, 200 * 1000}, - {0, 0, CPUFREQ_TABLE_END}, -}; - -static struct apll_freq apll_freq_5250[] = { - /* - * values: - * freq - * clock divider for ARM, CPUD, ACP, PERIPH, ATB, PCLK_DBG, APLL, ARM2 - * clock divider for COPY, HPM, RESERVED - * PLL M, P, S - */ - APLL_FREQ(1700, 0, 3, 7, 7, 7, 3, 5, 0, 0, 2, 0, 425, 6, 0), - APLL_FREQ(1600, 0, 3, 7, 7, 7, 1, 4, 0, 0, 2, 0, 200, 3, 0), - APLL_FREQ(1500, 0, 2, 7, 7, 7, 1, 4, 0, 0, 2, 0, 250, 4, 0), - APLL_FREQ(1400, 0, 2, 7, 7, 6, 1, 4, 0, 0, 2, 0, 175, 3, 0), - APLL_FREQ(1300, 0, 2, 7, 7, 6, 1, 3, 0, 0, 2, 0, 325, 6, 0), - APLL_FREQ(1200, 0, 2, 7, 7, 5, 1, 3, 0, 0, 2, 0, 200, 4, 0), - APLL_FREQ(1100, 0, 3, 7, 7, 5, 1, 3, 0, 0, 2, 0, 275, 6, 0), - APLL_FREQ(1000, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 125, 3, 0), - APLL_FREQ(900, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 150, 4, 0), - APLL_FREQ(800, 0, 1, 7, 7, 4, 1, 2, 0, 0, 2, 0, 100, 3, 0), - APLL_FREQ(700, 0, 1, 7, 7, 3, 1, 1, 0, 0, 2, 0, 175, 3, 1), - APLL_FREQ(600, 0, 1, 7, 7, 3, 1, 1, 0, 0, 2, 0, 200, 4, 1), - APLL_FREQ(500, 0, 1, 7, 7, 2, 1, 1, 0, 0, 2, 0, 125, 3, 1), - APLL_FREQ(400, 0, 1, 7, 7, 2, 1, 1, 0, 0, 2, 0, 100, 3, 1), - APLL_FREQ(300, 0, 1, 7, 7, 1, 1, 1, 0, 0, 2, 0, 200, 4, 2), - APLL_FREQ(200, 0, 1, 7, 7, 1, 1, 1, 0, 0, 2, 0, 100, 3, 2), -}; - -static void set_clkdiv(unsigned int div_index) -{ - unsigned int tmp; - - /* Change Divider - CPU0 */ - - tmp = apll_freq_5250[div_index].clk_div_cpu0; - - __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS5_CLKDIV_CPU0); - - while (__raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKDIV_STATCPU0) - & 0x11111111) - cpu_relax(); - - /* Change Divider - CPU1 */ - tmp = apll_freq_5250[div_index].clk_div_cpu1; - - __raw_writel(tmp, cpufreq->cmu_regs + EXYNOS5_CLKDIV_CPU1); - - while (__raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKDIV_STATCPU1) & 0x11) - cpu_relax(); -} - -static void set_apll(unsigned int index) -{ - unsigned int tmp; - unsigned int freq = apll_freq_5250[index].freq; - - /* MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */ - clk_set_parent(moutcore, mout_mpll); - - do { - cpu_relax(); - tmp = (__raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKMUX_STATCPU) - >> 16); - tmp &= 0x7; - } while (tmp != 0x2); - - clk_set_rate(mout_apll, freq * 1000); - - /* MUX_CORE_SEL = APLL */ - clk_set_parent(moutcore, mout_apll); - - do { - cpu_relax(); - tmp = __raw_readl(cpufreq->cmu_regs + EXYNOS5_CLKMUX_STATCPU); - tmp &= (0x7 << 16); - } while (tmp != (0x1 << 16)); -} - -static void exynos5250_set_frequency(unsigned int old_index, - unsigned int new_index) -{ - if (old_index > new_index) { - set_clkdiv(new_index); - set_apll(new_index); - } else if (old_index < new_index) { - set_apll(new_index); - set_clkdiv(new_index); - } -} - -int exynos5250_cpufreq_init(struct exynos_dvfs_info *info) -{ - struct device_node *np; - unsigned long rate; - - /* - * HACK: This is a temporary workaround to get access to clock - * controller registers directly and remove static mappings and - * dependencies on platform headers. It is necessary to enable - * Exynos multi-platform support and will be removed together with - * this whole driver as soon as Exynos gets migrated to use - * cpufreq-dt driver. - */ - np = of_find_compatible_node(NULL, NULL, "samsung,exynos5250-clock"); - if (!np) { - pr_err("%s: failed to find clock controller DT node\n", - __func__); - return -ENODEV; - } - - info->cmu_regs = of_iomap(np, 0); - if (!info->cmu_regs) { - pr_err("%s: failed to map CMU registers\n", __func__); - return -EFAULT; - } - - cpu_clk = clk_get(NULL, "armclk"); - if (IS_ERR(cpu_clk)) - return PTR_ERR(cpu_clk); - - moutcore = clk_get(NULL, "mout_cpu"); - if (IS_ERR(moutcore)) - goto err_moutcore; - - mout_mpll = clk_get(NULL, "mout_mpll"); - if (IS_ERR(mout_mpll)) - goto err_mout_mpll; - - rate = clk_get_rate(mout_mpll) / 1000; - - mout_apll = clk_get(NULL, "mout_apll"); - if (IS_ERR(mout_apll)) - goto err_mout_apll; - - info->mpll_freq_khz = rate; - /* 800Mhz */ - info->pll_safe_idx = L9; - info->cpu_clk = cpu_clk; - info->volt_table = exynos5250_volt_table; - info->freq_table = exynos5250_freq_table; - info->set_freq = exynos5250_set_frequency; - - cpufreq = info; - - return 0; - -err_mout_apll: - clk_put(mout_mpll); -err_mout_mpll: - clk_put(moutcore); -err_moutcore: - clk_put(cpu_clk); - - pr_err("%s: failed initialization\n", __func__); - return -EINVAL; -} |