diff options
Diffstat (limited to 'drivers/dma/dpaa2-qdma/fsl_dpdmai.h')
| -rw-r--r-- | drivers/dma/dpaa2-qdma/fsl_dpdmai.h | 521 |
1 files changed, 521 insertions, 0 deletions
diff --git a/drivers/dma/dpaa2-qdma/fsl_dpdmai.h b/drivers/dma/dpaa2-qdma/fsl_dpdmai.h new file mode 100644 index 0000000..a9ef08c --- /dev/null +++ b/drivers/dma/dpaa2-qdma/fsl_dpdmai.h @@ -0,0 +1,521 @@ +/* Copyright 2013-2015 Freescale Semiconductor, Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of the above-listed copyright holders nor the + * names of any contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE + * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + */ +#ifndef __FSL_DPDMAI_H +#define __FSL_DPDMAI_H + +struct fsl_mc_io; + +/* Data Path DMA Interface API + * Contains initialization APIs and runtime control APIs for DPDMAI + */ + +/* General DPDMAI macros */ + +/** + * Maximum number of Tx/Rx priorities per DPDMAI object + */ +#define DPDMAI_PRIO_NUM 2 + +/** + * All queues considered; see dpdmai_set_rx_queue() + */ +#define DPDMAI_ALL_QUEUES (uint8_t)(-1) + +/** + * dpdmai_open() - Open a control session for the specified object + * @mc_io: Pointer to MC portal's I/O object + * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' + * @dpdmai_id: DPDMAI unique ID + * @token: Returned token; use in subsequent API calls + * + * This function can be used to open a control session for an + * already created object; an object may have been declared in + * the DPL or by calling the dpdmai_create() function. + * This function returns a unique authentication token, + * associated with the specific object ID and the specific MC + * portal; this token must be used in all subsequent commands for + * this specific object. + * + * Return: '0' on Success; Error code otherwise. + */ +int dpdmai_open(struct fsl_mc_io *mc_io, + uint32_t cmd_flags, + int dpdmai_id, + uint16_t *token); + +/** + * dpdmai_close() - Close the control session of the object + * @mc_io: Pointer to MC portal's I/O object + * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' + * @token: Token of DPDMAI object + * + * After this function is called, no further operations are + * allowed on the object without opening a new control session. + * + * Return: '0' on Success; Error code otherwise. + */ +int dpdmai_close(struct fsl_mc_io *mc_io, + uint32_t cmd_flags, + uint16_t token); + +/** + * struct dpdmai_cfg - Structure representing DPDMAI configuration + * @priorities: Priorities for the DMA hardware processing; valid priorities are + * configured with values 1-8; the entry following last valid entry + * should be configured with 0 + */ +struct dpdmai_cfg { + uint8_t priorities[DPDMAI_PRIO_NUM]; +}; + +/** + * dpdmai_create() - Create the DPDMAI object + * @mc_io: Pointer to MC portal's I/O object + * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' + * @cfg: Configuration structure + * @token: Returned token; use in subsequent API calls + * + * Create the DPDMAI object, allocate required resources and + * perform required initialization. + * + * The object can be created either by declaring it in the + * DPL file, or by calling this function. + * + * This function returns a unique authentication token, + * associated with the specific object ID and the specific MC + * portal; this token must be used in all subsequent calls to + * this specific object. For objects that are created using the + * DPL file, call dpdmai_open() function to get an authentication + * token first. + * + * Return: '0' on Success; Error code otherwise. + */ +int dpdmai_create(struct fsl_mc_io *mc_io, + uint32_t cmd_flags, + const struct dpdmai_cfg *cfg, + uint16_t *token); + +/** + * dpdmai_destroy() - Destroy the DPDMAI object and release all its resources. + * @mc_io: Pointer to MC portal's I/O object + * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' + * @token: Token of DPDMAI object + * + * Return: '0' on Success; error code otherwise. + */ +int dpdmai_destroy(struct fsl_mc_io *mc_io, + uint32_t cmd_flags, + uint16_t token); + +/** + * dpdmai_enable() - Enable the DPDMAI, allow sending and receiving frames. + * @mc_io: Pointer to MC portal's I/O object + * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' + * @token: Token of DPDMAI object + * + * Return: '0' on Success; Error code otherwise. + */ +int dpdmai_enable(struct fsl_mc_io *mc_io, + uint32_t cmd_flags, + uint16_t token); + +/** + * dpdmai_disable() - Disable the DPDMAI, stop sending and receiving frames. + * @mc_io: Pointer to MC portal's I/O object + * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' + * @token: Token of DPDMAI object + * + * Return: '0' on Success; Error code otherwise. + */ +int dpdmai_disable(struct fsl_mc_io *mc_io, + uint32_t cmd_flags, + uint16_t token); + +/** + * dpdmai_is_enabled() - Check if the DPDMAI is enabled. + * @mc_io: Pointer to MC portal's I/O object + * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' + * @token: Token of DPDMAI object + * @en: Returns '1' if object is enabled; '0' otherwise + * + * Return: '0' on Success; Error code otherwise. + */ +int dpdmai_is_enabled(struct fsl_mc_io *mc_io, + uint32_t cmd_flags, + uint16_t token, + int *en); + +/** + * dpdmai_reset() - Reset the DPDMAI, returns the object to initial state. + * @mc_io: Pointer to MC portal's I/O object + * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' + * @token: Token of DPDMAI object + * + * Return: '0' on Success; Error code otherwise. + */ +int dpdmai_reset(struct fsl_mc_io *mc_io, + uint32_t cmd_flags, + uint16_t token); + +/** + * struct dpdmai_irq_cfg - IRQ configuration + * @addr: Address that must be written to signal a message-based interrupt + * @val: Value to write into irq_addr address + * @irq_num: A user defined number associated with this IRQ + */ +struct dpdmai_irq_cfg { + uint64_t addr; + uint32_t val; + int irq_num; +}; + +/** + * dpdmai_set_irq() - Set IRQ information for the DPDMAI to trigger an interrupt. + * @mc_io: Pointer to MC portal's I/O object + * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' + * @token: Token of DPDMAI object + * @irq_index: Identifies the interrupt index to configure + * @irq_cfg: IRQ configuration + * + * Return: '0' on Success; Error code otherwise. + */ +int dpdmai_set_irq(struct fsl_mc_io *mc_io, + uint32_t cmd_flags, + uint16_t token, + uint8_t irq_index, + struct dpdmai_irq_cfg *irq_cfg); + +/** + * dpdmai_get_irq() - Get IRQ information from the DPDMAI + * + * @mc_io: Pointer to MC portal's I/O object + * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' + * @token: Token of DPDMAI object + * @irq_index: The interrupt index to configure + * @type: Interrupt type: 0 represents message interrupt + * type (both irq_addr and irq_val are valid) + * @irq_cfg: IRQ attributes + * + * Return: '0' on Success; Error code otherwise. + */ +int dpdmai_get_irq(struct fsl_mc_io *mc_io, + uint32_t cmd_flags, + uint16_t token, + uint8_t irq_index, + int *type, + struct dpdmai_irq_cfg *irq_cfg); + +/** + * dpdmai_set_irq_enable() - Set overall interrupt state. + * @mc_io: Pointer to MC portal's I/O object + * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' + * @token: Token of DPDMAI object + * @irq_index: The interrupt index to configure + * @en: Interrupt state - enable = 1, disable = 0 + * + * Allows GPP software to control when interrupts are generated. + * Each interrupt can have up to 32 causes. The enable/disable control's the + * overall interrupt state. if the interrupt is disabled no causes will cause + * an interrupt + * + * Return: '0' on Success; Error code otherwise. + */ +int dpdmai_set_irq_enable(struct fsl_mc_io *mc_io, + uint32_t cmd_flags, + uint16_t token, + uint8_t irq_index, + uint8_t en); + +/** + * dpdmai_get_irq_enable() - Get overall interrupt state + * @mc_io: Pointer to MC portal's I/O object + * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' + * @token: Token of DPDMAI object + * @irq_index: The interrupt index to configure + * @en: Returned Interrupt state - enable = 1, disable = 0 + * + * Return: '0' on Success; Error code otherwise. + */ +int dpdmai_get_irq_enable(struct fsl_mc_io *mc_io, + uint32_t cmd_flags, + uint16_t token, + uint8_t irq_index, + uint8_t *en); + +/** + * dpdmai_set_irq_mask() - Set interrupt mask. + * @mc_io: Pointer to MC portal's I/O object + * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' + * @token: Token of DPDMAI object + * @irq_index: The interrupt index to configure + * @mask: event mask to trigger interrupt; + * each bit: + * 0 = ignore event + * 1 = consider event for asserting IRQ + * + * Every interrupt can have up to 32 causes and the interrupt model supports + * masking/unmasking each cause independently + * + * Return: '0' on Success; Error code otherwise. + */ +int dpdmai_set_irq_mask(struct fsl_mc_io *mc_io, + uint32_t cmd_flags, + uint16_t token, + uint8_t irq_index, + uint32_t mask); + +/** + * dpdmai_get_irq_mask() - Get interrupt mask. + * @mc_io: Pointer to MC portal's I/O object + * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' + * @token: Token of DPDMAI object + * @irq_index: The interrupt index to configure + * @mask: Returned event mask to trigger interrupt + * + * Every interrupt can have up to 32 causes and the interrupt model supports + * masking/unmasking each cause independently + * + * Return: '0' on Success; Error code otherwise. + */ +int dpdmai_get_irq_mask(struct fsl_mc_io *mc_io, + uint32_t cmd_flags, + uint16_t token, + uint8_t irq_index, + uint32_t *mask); + +/** + * dpdmai_get_irq_status() - Get the current status of any pending interrupts + * @mc_io: Pointer to MC portal's I/O object + * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' + * @token: Token of DPDMAI object + * @irq_index: The interrupt index to configure + * @status: Returned interrupts status - one bit per cause: + * 0 = no interrupt pending + * 1 = interrupt pending + * + * Return: '0' on Success; Error code otherwise. + */ +int dpdmai_get_irq_status(struct fsl_mc_io *mc_io, + uint32_t cmd_flags, + uint16_t token, + uint8_t irq_index, + uint32_t *status); + +/** + * dpdmai_clear_irq_status() - Clear a pending interrupt's status + * @mc_io: Pointer to MC portal's I/O object + * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' + * @token: Token of DPDMAI object + * @irq_index: The interrupt index to configure + * @status: bits to clear (W1C) - one bit per cause: + * 0 = don't change + * 1 = clear status bit + * + * Return: '0' on Success; Error code otherwise. + */ +int dpdmai_clear_irq_status(struct fsl_mc_io *mc_io, + uint32_t cmd_flags, + uint16_t token, + uint8_t irq_index, + uint32_t status); + +/** + * struct dpdmai_attr - Structure representing DPDMAI attributes + * @id: DPDMAI object ID + * @version: DPDMAI version + * @num_of_priorities: number of priorities + */ +struct dpdmai_attr { + int id; + /** + * struct version - DPDMAI version + * @major: DPDMAI major version + * @minor: DPDMAI minor version + */ + struct { + uint16_t major; + uint16_t minor; + } version; + uint8_t num_of_priorities; +}; + +/** + * dpdmai_get_attributes() - Retrieve DPDMAI attributes. + * @mc_io: Pointer to MC portal's I/O object + * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' + * @token: Token of DPDMAI object + * @attr: Returned object's attributes + * + * Return: '0' on Success; Error code otherwise. + */ +int dpdmai_get_attributes(struct fsl_mc_io *mc_io, + uint32_t cmd_flags, + uint16_t token, + struct dpdmai_attr *attr); + +/** + * enum dpdmai_dest - DPDMAI destination types + * @DPDMAI_DEST_NONE: Unassigned destination; The queue is set in parked mode + * and does not generate FQDAN notifications; user is expected to dequeue + * from the queue based on polling or other user-defined method + * @DPDMAI_DEST_DPIO: The queue is set in schedule mode and generates FQDAN + * notifications to the specified DPIO; user is expected to dequeue + * from the queue only after notification is received + * @DPDMAI_DEST_DPCON: The queue is set in schedule mode and does not generate + * FQDAN notifications, but is connected to the specified DPCON object; + * user is expected to dequeue from the DPCON channel + */ +enum dpdmai_dest { + DPDMAI_DEST_NONE = 0, + DPDMAI_DEST_DPIO = 1, + DPDMAI_DEST_DPCON = 2 +}; + +/** + * struct dpdmai_dest_cfg - Structure representing DPDMAI destination parameters + * @dest_type: Destination type + * @dest_id: Either DPIO ID or DPCON ID, depending on the destination type + * @priority: Priority selection within the DPIO or DPCON channel; valid values + * are 0-1 or 0-7, depending on the number of priorities in that + * channel; not relevant for 'DPDMAI_DEST_NONE' option + */ +struct dpdmai_dest_cfg { + enum dpdmai_dest dest_type; + int dest_id; + uint8_t priority; +}; + +/* DPDMAI queue modification options */ + +/** + * Select to modify the user's context associated with the queue + */ +#define DPDMAI_QUEUE_OPT_USER_CTX 0x00000001 + +/** + * Select to modify the queue's destination + */ +#define DPDMAI_QUEUE_OPT_DEST 0x00000002 + +/** + * struct dpdmai_rx_queue_cfg - DPDMAI RX queue configuration + * @options: Flags representing the suggested modifications to the queue; + * Use any combination of 'DPDMAI_QUEUE_OPT_<X>' flags + * @user_ctx: User context value provided in the frame descriptor of each + * dequeued frame; + * valid only if 'DPDMAI_QUEUE_OPT_USER_CTX' is contained in 'options' + * @dest_cfg: Queue destination parameters; + * valid only if 'DPDMAI_QUEUE_OPT_DEST' is contained in 'options' + */ +struct dpdmai_rx_queue_cfg { + uint32_t options; + uint64_t user_ctx; + struct dpdmai_dest_cfg dest_cfg; + +}; + +/** + * dpdmai_set_rx_queue() - Set Rx queue configuration + * @mc_io: Pointer to MC portal's I/O object + * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' + * @token: Token of DPDMAI object + * @priority: Select the queue relative to number of + * priorities configured at DPDMAI creation; use + * DPDMAI_ALL_QUEUES to configure all Rx queues + * identically. + * @cfg: Rx queue configuration + * + * Return: '0' on Success; Error code otherwise. + */ +int dpdmai_set_rx_queue(struct fsl_mc_io *mc_io, + uint32_t cmd_flags, + uint16_t token, + uint8_t priority, + const struct dpdmai_rx_queue_cfg *cfg); + +/** + * struct dpdmai_rx_queue_attr - Structure representing attributes of Rx queues + * @user_ctx: User context value provided in the frame descriptor of each + * dequeued frame + * @dest_cfg: Queue destination configuration + * @fqid: Virtual FQID value to be used for dequeue operations + */ +struct dpdmai_rx_queue_attr { + uint64_t user_ctx; + struct dpdmai_dest_cfg dest_cfg; + uint32_t fqid; +}; + +/** + * dpdmai_get_rx_queue() - Retrieve Rx queue attributes. + * @mc_io: Pointer to MC portal's I/O object + * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' + * @token: Token of DPDMAI object + * @priority: Select the queue relative to number of + * priorities configured at DPDMAI creation + * @attr: Returned Rx queue attributes + * + * Return: '0' on Success; Error code otherwise. + */ +int dpdmai_get_rx_queue(struct fsl_mc_io *mc_io, + uint32_t cmd_flags, + uint16_t token, + uint8_t priority, + struct dpdmai_rx_queue_attr *attr); + +/** + * struct dpdmai_tx_queue_attr - Structure representing attributes of Tx queues + * @fqid: Virtual FQID to be used for sending frames to DMA hardware + */ + +struct dpdmai_tx_queue_attr { + uint32_t fqid; +}; + +/** + * dpdmai_get_tx_queue() - Retrieve Tx queue attributes. + * @mc_io: Pointer to MC portal's I/O object + * @cmd_flags: Command flags; one or more of 'MC_CMD_FLAG_' + * @token: Token of DPDMAI object + * @priority: Select the queue relative to number of + * priorities configured at DPDMAI creation + * @attr: Returned Tx queue attributes + * + * Return: '0' on Success; Error code otherwise. + */ +int dpdmai_get_tx_queue(struct fsl_mc_io *mc_io, + uint32_t cmd_flags, + uint16_t token, + uint8_t priority, + struct dpdmai_tx_queue_attr *attr); + +#endif /* __FSL_DPDMAI_H */ |