diff options
Diffstat (limited to 'drivers/edac/amd64_edac.c')
| -rw-r--r-- | drivers/edac/amd64_edac.c | 141 |
1 files changed, 141 insertions, 0 deletions
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c index 6876d43..a774f34 100644 --- a/drivers/edac/amd64_edac.c +++ b/drivers/edac/amd64_edac.c @@ -128,3 +128,144 @@ static int amd64_get_scrub_rate(struct mem_ctl_info *mci, u32 *bw) return status; } +/* Map from a CSROW entry to the mask entry that operates on it */ +static inline u32 amd64_map_to_dcs_mask(struct amd64_pvt *pvt, int csrow) +{ + return csrow >> (pvt->num_dcsm >> 3); +} + +/* return the 'base' address the i'th CS entry of the 'dct' DRAM controller */ +static u32 amd64_get_dct_base(struct amd64_pvt *pvt, int dct, int csrow) +{ + if (dct == 0) + return pvt->dcsb0[csrow]; + else + return pvt->dcsb1[csrow]; +} + +/* + * Return the 'mask' address the i'th CS entry. This function is needed because + * there number of DCSM registers on Rev E and prior vs Rev F and later is + * different. + */ +static u32 amd64_get_dct_mask(struct amd64_pvt *pvt, int dct, int csrow) +{ + if (dct == 0) + return pvt->dcsm0[amd64_map_to_dcs_mask(pvt, csrow)]; + else + return pvt->dcsm1[amd64_map_to_dcs_mask(pvt, csrow)]; +} + + +/* + * In *base and *limit, pass back the full 40-bit base and limit physical + * addresses for the node given by node_id. This information is obtained from + * DRAM Base (section 3.4.4.1) and DRAM Limit (section 3.4.4.2) registers. The + * base and limit addresses are of type SysAddr, as defined at the start of + * section 3.4.4 (p. 70). They are the lowest and highest physical addresses + * in the address range they represent. + */ +static void amd64_get_base_and_limit(struct amd64_pvt *pvt, int node_id, + u64 *base, u64 *limit) +{ + *base = pvt->dram_base[node_id]; + *limit = pvt->dram_limit[node_id]; +} + +/* + * Return 1 if the SysAddr given by sys_addr matches the base/limit associated + * with node_id + */ +static int amd64_base_limit_match(struct amd64_pvt *pvt, + u64 sys_addr, int node_id) +{ + u64 base, limit, addr; + + amd64_get_base_and_limit(pvt, node_id, &base, &limit); + + /* The K8 treats this as a 40-bit value. However, bits 63-40 will be + * all ones if the most significant implemented address bit is 1. + * Here we discard bits 63-40. See section 3.4.2 of AMD publication + * 24592: AMD x86-64 Architecture Programmer's Manual Volume 1 + * Application Programming. + */ + addr = sys_addr & 0x000000ffffffffffull; + + return (addr >= base) && (addr <= limit); +} + +/* + * Attempt to map a SysAddr to a node. On success, return a pointer to the + * mem_ctl_info structure for the node that the SysAddr maps to. + * + * On failure, return NULL. + */ +static struct mem_ctl_info *find_mc_by_sys_addr(struct mem_ctl_info *mci, + u64 sys_addr) +{ + struct amd64_pvt *pvt; + int node_id; + u32 intlv_en, bits; + + /* + * Here we use the DRAM Base (section 3.4.4.1) and DRAM Limit (section + * 3.4.4.2) registers to map the SysAddr to a node ID. + */ + pvt = mci->pvt_info; + + /* + * The value of this field should be the same for all DRAM Base + * registers. Therefore we arbitrarily choose to read it from the + * register for node 0. + */ + intlv_en = pvt->dram_IntlvEn[0]; + + if (intlv_en == 0) { + for (node_id = 0; ; ) { + if (amd64_base_limit_match(pvt, sys_addr, node_id)) + break; + + if (++node_id >= DRAM_REG_COUNT) + goto err_no_match; + } + goto found; + } + + if (unlikely((intlv_en != (0x01 << 8)) && + (intlv_en != (0x03 << 8)) && + (intlv_en != (0x07 << 8)))) { + amd64_printk(KERN_WARNING, "junk value of 0x%x extracted from " + "IntlvEn field of DRAM Base Register for node 0: " + "This probably indicates a BIOS bug.\n", intlv_en); + return NULL; + } + + bits = (((u32) sys_addr) >> 12) & intlv_en; + + for (node_id = 0; ; ) { + if ((pvt->dram_limit[node_id] & intlv_en) == bits) + break; /* intlv_sel field matches */ + + if (++node_id >= DRAM_REG_COUNT) + goto err_no_match; + } + + /* sanity test for sys_addr */ + if (unlikely(!amd64_base_limit_match(pvt, sys_addr, node_id))) { + amd64_printk(KERN_WARNING, + "%s(): sys_addr 0x%lx falls outside base/limit " + "address range for node %d with node interleaving " + "enabled.\n", __func__, (unsigned long)sys_addr, + node_id); + return NULL; + } + +found: + return edac_mc_find(node_id); + +err_no_match: + debugf2("sys_addr 0x%lx doesn't match any node\n", + (unsigned long)sys_addr); + + return NULL; +} |