diff options
Diffstat (limited to 'drivers/gpu/drm/bridge')
| -rw-r--r-- | drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 274 | ||||
| -rw-r--r-- | drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 40 | ||||
| -rw-r--r-- | drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 451 |
3 files changed, 210 insertions, 555 deletions
diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c index efac8ab..774cc796 100644 --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c @@ -31,6 +31,7 @@ #include <drm/bridge/analogix_dp.h> #include "analogix_dp_core.h" +#include "analogix_dp_reg.h" #define to_dp(nm) container_of(nm, struct analogix_dp_device, nm) @@ -147,7 +148,7 @@ static bool analogix_dp_detect_sink_psr(struct analogix_dp_device *dp) { unsigned char psr_version; - analogix_dp_read_byte_from_dpcd(dp, DP_PSR_SUPPORT, &psr_version); + drm_dp_dpcd_readb(&dp->aux, DP_PSR_SUPPORT, &psr_version); dev_dbg(dp->dev, "Panel PSR version : %x\n", psr_version); return (psr_version & DP_PSR_IS_SUPPORTED) ? true : false; @@ -158,166 +159,37 @@ static void analogix_dp_enable_sink_psr(struct analogix_dp_device *dp) unsigned char psr_en; /* Disable psr function */ - analogix_dp_read_byte_from_dpcd(dp, DP_PSR_EN_CFG, &psr_en); + drm_dp_dpcd_readb(&dp->aux, DP_PSR_EN_CFG, &psr_en); psr_en &= ~DP_PSR_ENABLE; - analogix_dp_write_byte_to_dpcd(dp, DP_PSR_EN_CFG, psr_en); + drm_dp_dpcd_writeb(&dp->aux, DP_PSR_EN_CFG, psr_en); /* Main-Link transmitter remains active during PSR active states */ psr_en = DP_PSR_MAIN_LINK_ACTIVE | DP_PSR_CRC_VERIFICATION; - analogix_dp_write_byte_to_dpcd(dp, DP_PSR_EN_CFG, psr_en); + drm_dp_dpcd_writeb(&dp->aux, DP_PSR_EN_CFG, psr_en); /* Enable psr function */ psr_en = DP_PSR_ENABLE | DP_PSR_MAIN_LINK_ACTIVE | DP_PSR_CRC_VERIFICATION; - analogix_dp_write_byte_to_dpcd(dp, DP_PSR_EN_CFG, psr_en); + drm_dp_dpcd_writeb(&dp->aux, DP_PSR_EN_CFG, psr_en); analogix_dp_enable_psr_crc(dp); } -static unsigned char analogix_dp_calc_edid_check_sum(unsigned char *edid_data) -{ - int i; - unsigned char sum = 0; - - for (i = 0; i < EDID_BLOCK_LENGTH; i++) - sum = sum + edid_data[i]; - - return sum; -} - -static int analogix_dp_read_edid(struct analogix_dp_device *dp) -{ - unsigned char *edid = dp->edid; - unsigned int extend_block = 0; - unsigned char sum; - unsigned char test_vector; - int retval; - - /* - * EDID device address is 0x50. - * However, if necessary, you must have set upper address - * into E-EDID in I2C device, 0x30. - */ - - /* Read Extension Flag, Number of 128-byte EDID extension blocks */ - retval = analogix_dp_read_byte_from_i2c(dp, I2C_EDID_DEVICE_ADDR, - EDID_EXTENSION_FLAG, - &extend_block); - if (retval) - return retval; - - if (extend_block > 0) { - dev_dbg(dp->dev, "EDID data includes a single extension!\n"); - - /* Read EDID data */ - retval = analogix_dp_read_bytes_from_i2c(dp, - I2C_EDID_DEVICE_ADDR, - EDID_HEADER_PATTERN, - EDID_BLOCK_LENGTH, - &edid[EDID_HEADER_PATTERN]); - if (retval != 0) { - dev_err(dp->dev, "EDID Read failed!\n"); - return -EIO; - } - sum = analogix_dp_calc_edid_check_sum(edid); - if (sum != 0) { - dev_err(dp->dev, "EDID bad checksum!\n"); - return -EIO; - } - - /* Read additional EDID data */ - retval = analogix_dp_read_bytes_from_i2c(dp, - I2C_EDID_DEVICE_ADDR, - EDID_BLOCK_LENGTH, - EDID_BLOCK_LENGTH, - &edid[EDID_BLOCK_LENGTH]); - if (retval != 0) { - dev_err(dp->dev, "EDID Read failed!\n"); - return -EIO; - } - sum = analogix_dp_calc_edid_check_sum(&edid[EDID_BLOCK_LENGTH]); - if (sum != 0) { - dev_err(dp->dev, "EDID bad checksum!\n"); - return -EIO; - } - - analogix_dp_read_byte_from_dpcd(dp, DP_TEST_REQUEST, - &test_vector); - if (test_vector & DP_TEST_LINK_EDID_READ) { - analogix_dp_write_byte_to_dpcd(dp, - DP_TEST_EDID_CHECKSUM, - edid[EDID_BLOCK_LENGTH + EDID_CHECKSUM]); - analogix_dp_write_byte_to_dpcd(dp, - DP_TEST_RESPONSE, - DP_TEST_EDID_CHECKSUM_WRITE); - } - } else { - dev_info(dp->dev, "EDID data does not include any extensions.\n"); - - /* Read EDID data */ - retval = analogix_dp_read_bytes_from_i2c(dp, - I2C_EDID_DEVICE_ADDR, EDID_HEADER_PATTERN, - EDID_BLOCK_LENGTH, &edid[EDID_HEADER_PATTERN]); - if (retval != 0) { - dev_err(dp->dev, "EDID Read failed!\n"); - return -EIO; - } - sum = analogix_dp_calc_edid_check_sum(edid); - if (sum != 0) { - dev_err(dp->dev, "EDID bad checksum!\n"); - return -EIO; - } - - analogix_dp_read_byte_from_dpcd(dp, DP_TEST_REQUEST, - &test_vector); - if (test_vector & DP_TEST_LINK_EDID_READ) { - analogix_dp_write_byte_to_dpcd(dp, - DP_TEST_EDID_CHECKSUM, edid[EDID_CHECKSUM]); - analogix_dp_write_byte_to_dpcd(dp, - DP_TEST_RESPONSE, DP_TEST_EDID_CHECKSUM_WRITE); - } - } - - dev_dbg(dp->dev, "EDID Read success!\n"); - return 0; -} - -static int analogix_dp_handle_edid(struct analogix_dp_device *dp) -{ - u8 buf[12]; - int i; - int retval; - - /* Read DPCD DP_DPCD_REV~RECEIVE_PORT1_CAP_1 */ - retval = analogix_dp_read_bytes_from_dpcd(dp, DP_DPCD_REV, 12, buf); - if (retval) - return retval; - - /* Read EDID */ - for (i = 0; i < 3; i++) { - retval = analogix_dp_read_edid(dp); - if (!retval) - break; - } - - return retval; -} - static void analogix_dp_enable_rx_to_enhanced_mode(struct analogix_dp_device *dp, bool enable) { u8 data; - analogix_dp_read_byte_from_dpcd(dp, DP_LANE_COUNT_SET, &data); + drm_dp_dpcd_readb(&dp->aux, DP_LANE_COUNT_SET, &data); if (enable) - analogix_dp_write_byte_to_dpcd(dp, DP_LANE_COUNT_SET, - DP_LANE_COUNT_ENHANCED_FRAME_EN | - DPCD_LANE_COUNT_SET(data)); + drm_dp_dpcd_writeb(&dp->aux, DP_LANE_COUNT_SET, + DP_LANE_COUNT_ENHANCED_FRAME_EN | + DPCD_LANE_COUNT_SET(data)); else - analogix_dp_write_byte_to_dpcd(dp, DP_LANE_COUNT_SET, - DPCD_LANE_COUNT_SET(data)); + drm_dp_dpcd_writeb(&dp->aux, DP_LANE_COUNT_SET, + DPCD_LANE_COUNT_SET(data)); } static int analogix_dp_is_enhanced_mode_available(struct analogix_dp_device *dp) @@ -325,7 +197,7 @@ static int analogix_dp_is_enhanced_mode_available(struct analogix_dp_device *dp) u8 data; int retval; - analogix_dp_read_byte_from_dpcd(dp, DP_MAX_LANE_COUNT, &data); + drm_dp_dpcd_readb(&dp->aux, DP_MAX_LANE_COUNT, &data); retval = DPCD_ENHANCED_FRAME_CAP(data); return retval; @@ -344,8 +216,8 @@ static void analogix_dp_training_pattern_dis(struct analogix_dp_device *dp) { analogix_dp_set_training_pattern(dp, DP_NONE); - analogix_dp_write_byte_to_dpcd(dp, DP_TRAINING_PATTERN_SET, - DP_TRAINING_PATTERN_DISABLE); + drm_dp_dpcd_writeb(&dp->aux, DP_TRAINING_PATTERN_SET, + DP_TRAINING_PATTERN_DISABLE); } static void @@ -390,8 +262,8 @@ static int analogix_dp_link_start(struct analogix_dp_device *dp) /* Setup RX configuration */ buf[0] = dp->link_train.link_rate; buf[1] = dp->link_train.lane_count; - retval = analogix_dp_write_bytes_to_dpcd(dp, DP_LINK_BW_SET, 2, buf); - if (retval) + retval = drm_dp_dpcd_write(&dp->aux, DP_LINK_BW_SET, buf, 2); + if (retval < 0) return retval; /* Set TX pre-emphasis to minimum */ @@ -415,20 +287,22 @@ static int analogix_dp_link_start(struct analogix_dp_device *dp) analogix_dp_set_training_pattern(dp, TRAINING_PTN1); /* Set RX training pattern */ - retval = analogix_dp_write_byte_to_dpcd(dp, - DP_TRAINING_PATTERN_SET, - DP_LINK_SCRAMBLING_DISABLE | DP_TRAINING_PATTERN_1); - if (retval) + retval = drm_dp_dpcd_writeb(&dp->aux, DP_TRAINING_PATTERN_SET, + DP_LINK_SCRAMBLING_DISABLE | + DP_TRAINING_PATTERN_1); + if (retval < 0) return retval; for (lane = 0; lane < lane_count; lane++) buf[lane] = DP_TRAIN_PRE_EMPH_LEVEL_0 | DP_TRAIN_VOLTAGE_SWING_LEVEL_0; - retval = analogix_dp_write_bytes_to_dpcd(dp, DP_TRAINING_LANE0_SET, - lane_count, buf); + retval = drm_dp_dpcd_write(&dp->aux, DP_TRAINING_LANE0_SET, buf, + lane_count); + if (retval < 0) + return retval; - return retval; + return 0; } static unsigned char analogix_dp_get_lane_status(u8 link_status[2], int lane) @@ -580,25 +454,23 @@ static int analogix_dp_process_clock_recovery(struct analogix_dp_device *dp) lane_count = dp->link_train.lane_count; - retval = analogix_dp_read_bytes_from_dpcd(dp, - DP_LANE0_1_STATUS, 2, link_status); - if (retval) + retval = drm_dp_dpcd_read(&dp->aux, DP_LANE0_1_STATUS, link_status, 2); + if (retval < 0) return retval; - retval = analogix_dp_read_bytes_from_dpcd(dp, - DP_ADJUST_REQUEST_LANE0_1, 2, adjust_request); - if (retval) + retval = drm_dp_dpcd_read(&dp->aux, DP_ADJUST_REQUEST_LANE0_1, + adjust_request, 2); + if (retval < 0) return retval; if (analogix_dp_clock_recovery_ok(link_status, lane_count) == 0) { /* set training pattern 2 for EQ */ analogix_dp_set_training_pattern(dp, TRAINING_PTN2); - retval = analogix_dp_write_byte_to_dpcd(dp, - DP_TRAINING_PATTERN_SET, - DP_LINK_SCRAMBLING_DISABLE | - DP_TRAINING_PATTERN_2); - if (retval) + retval = drm_dp_dpcd_writeb(&dp->aux, DP_TRAINING_PATTERN_SET, + DP_LINK_SCRAMBLING_DISABLE | + DP_TRAINING_PATTERN_2); + if (retval < 0) return retval; dev_info(dp->dev, "Link Training Clock Recovery success\n"); @@ -636,13 +508,12 @@ static int analogix_dp_process_clock_recovery(struct analogix_dp_device *dp) analogix_dp_set_lane_link_training(dp, dp->link_train.training_lane[lane], lane); - retval = analogix_dp_write_bytes_to_dpcd(dp, - DP_TRAINING_LANE0_SET, lane_count, - dp->link_train.training_lane); - if (retval) + retval = drm_dp_dpcd_write(&dp->aux, DP_TRAINING_LANE0_SET, + dp->link_train.training_lane, lane_count); + if (retval < 0) return retval; - return retval; + return 0; } static int analogix_dp_process_equalizer_training(struct analogix_dp_device *dp) @@ -655,9 +526,8 @@ static int analogix_dp_process_equalizer_training(struct analogix_dp_device *dp) lane_count = dp->link_train.lane_count; - retval = analogix_dp_read_bytes_from_dpcd(dp, - DP_LANE0_1_STATUS, 2, link_status); - if (retval) + retval = drm_dp_dpcd_read(&dp->aux, DP_LANE0_1_STATUS, link_status, 2); + if (retval < 0) return retval; if (analogix_dp_clock_recovery_ok(link_status, lane_count)) { @@ -665,14 +535,14 @@ static int analogix_dp_process_equalizer_training(struct analogix_dp_device *dp) return -EIO; } - retval = analogix_dp_read_bytes_from_dpcd(dp, - DP_ADJUST_REQUEST_LANE0_1, 2, adjust_request); - if (retval) + retval = drm_dp_dpcd_read(&dp->aux, DP_ADJUST_REQUEST_LANE0_1, + adjust_request, 2); + if (retval < 0) return retval; - retval = analogix_dp_read_byte_from_dpcd(dp, - DP_LANE_ALIGN_STATUS_UPDATED, &link_align); - if (retval) + retval = drm_dp_dpcd_readb(&dp->aux, DP_LANE_ALIGN_STATUS_UPDATED, + &link_align); + if (retval < 0) return retval; analogix_dp_get_adjust_training_lane(dp, adjust_request); @@ -713,10 +583,12 @@ static int analogix_dp_process_equalizer_training(struct analogix_dp_device *dp) analogix_dp_set_lane_link_training(dp, dp->link_train.training_lane[lane], lane); - retval = analogix_dp_write_bytes_to_dpcd(dp, DP_TRAINING_LANE0_SET, - lane_count, dp->link_train.training_lane); + retval = drm_dp_dpcd_write(&dp->aux, DP_TRAINING_LANE0_SET, + dp->link_train.training_lane, lane_count); + if (retval < 0) + return retval; - return retval; + return 0; } static void analogix_dp_get_max_rx_bandwidth(struct analogix_dp_device *dp, @@ -730,7 +602,7 @@ static void analogix_dp_get_max_rx_bandwidth(struct analogix_dp_device *dp, * For DP rev.1.2, Maximum link rate of Main Link lanes * 0x06 = 1.62 Gbps, 0x0a = 2.7 Gbps, 0x14 = 5.4Gbps */ - analogix_dp_read_byte_from_dpcd(dp, DP_MAX_LINK_RATE, &data); + drm_dp_dpcd_readb(&dp->aux, DP_MAX_LINK_RATE, &data); *bandwidth = data; } @@ -743,7 +615,7 @@ static void analogix_dp_get_max_rx_lane_count(struct analogix_dp_device *dp, * For DP rev.1.1, Maximum number of Main Link lanes * 0x01 = 1 lane, 0x02 = 2 lanes, 0x04 = 4 lanes */ - analogix_dp_read_byte_from_dpcd(dp, DP_MAX_LANE_COUNT, &data); + drm_dp_dpcd_readb(&dp->aux, DP_MAX_LANE_COUNT, &data); *lane_count = DPCD_MAX_LANE_COUNT(data); } @@ -912,19 +784,15 @@ static void analogix_dp_enable_scramble(struct analogix_dp_device *dp, if (enable) { analogix_dp_enable_scrambling(dp); - analogix_dp_read_byte_from_dpcd(dp, DP_TRAINING_PATTERN_SET, - &data); - analogix_dp_write_byte_to_dpcd(dp, - DP_TRAINING_PATTERN_SET, - (u8)(data & ~DP_LINK_SCRAMBLING_DISABLE)); + drm_dp_dpcd_readb(&dp->aux, DP_TRAINING_PATTERN_SET, &data); + drm_dp_dpcd_writeb(&dp->aux, DP_TRAINING_PATTERN_SET, + (u8)(data & ~DP_LINK_SCRAMBLING_DISABLE)); } else { analogix_dp_disable_scrambling(dp); - analogix_dp_read_byte_from_dpcd(dp, DP_TRAINING_PATTERN_SET, - &data); - analogix_dp_write_byte_to_dpcd(dp, - DP_TRAINING_PATTERN_SET, - (u8)(data | DP_LINK_SCRAMBLING_DISABLE)); + drm_dp_dpcd_readb(&dp->aux, DP_TRAINING_PATTERN_SET, &data); + drm_dp_dpcd_writeb(&dp->aux, DP_TRAINING_PATTERN_SET, + (u8)(data | DP_LINK_SCRAMBLING_DISABLE)); } } @@ -1053,7 +921,7 @@ out: int analogix_dp_get_modes(struct drm_connector *connector) { struct analogix_dp_device *dp = to_dp(connector); - struct edid *edid = (struct edid *)dp->edid; + struct edid *edid; int ret, num_modes = 0; ret = analogix_dp_prepare_panel(dp, true, false); @@ -1062,9 +930,11 @@ int analogix_dp_get_modes(struct drm_connector *connector) return 0; } - if (analogix_dp_handle_edid(dp) == 0) { + edid = drm_get_edid(connector, &dp->aux.ddc); + if (edid) { drm_mode_connector_update_edid_property(&dp->connector, edid); num_modes += drm_add_edid_modes(&dp->connector, edid); + kfree(edid); } if (dp->plat_data->panel) @@ -1395,6 +1265,14 @@ static int analogix_dp_dt_parse_pdata(struct analogix_dp_device *dp) return 0; } +static ssize_t analogix_dpaux_transfer(struct drm_dp_aux *aux, + struct drm_dp_aux_msg *msg) +{ + struct analogix_dp_device *dp = to_dp(aux); + + return analogix_dp_transfer(dp, msg); +} + int analogix_dp_bind(struct device *dev, struct drm_device *drm_dev, struct analogix_dp_plat_data *plat_data) { @@ -1515,6 +1393,14 @@ int analogix_dp_bind(struct device *dev, struct drm_device *drm_dev, dp->drm_dev = drm_dev; dp->encoder = dp->plat_data->encoder; + dp->aux.name = "DP-AUX"; + dp->aux.transfer = analogix_dpaux_transfer; + dp->aux.dev = &pdev->dev; + + ret = drm_dp_aux_register(&dp->aux); + if (ret) + goto err_disable_pm_runtime; + ret = analogix_dp_create_bridge(drm_dev, dp); if (ret) { DRM_ERROR("failed to create bridge (%d)\n", ret); diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h index 473b980..5c6a288 100644 --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h @@ -20,15 +20,6 @@ #define MAX_CR_LOOP 5 #define MAX_EQ_LOOP 5 -/* I2C EDID Chip ID, Slave Address */ -#define I2C_EDID_DEVICE_ADDR 0x50 -#define I2C_E_EDID_DEVICE_ADDR 0x30 - -#define EDID_BLOCK_LENGTH 0x80 -#define EDID_HEADER_PATTERN 0x00 -#define EDID_EXTENSION_FLAG 0x7e -#define EDID_CHECKSUM 0x7f - /* DP_MAX_LANE_COUNT */ #define DPCD_ENHANCED_FRAME_CAP(x) (((x) >> 7) & 0x1) #define DPCD_MAX_LANE_COUNT(x) ((x) & 0x1f) @@ -166,6 +157,7 @@ struct analogix_dp_device { struct drm_device *drm_dev; struct drm_connector connector; struct drm_bridge *bridge; + struct drm_dp_aux aux; struct clk *clock; unsigned int irq; void __iomem *reg_base; @@ -176,7 +168,6 @@ struct analogix_dp_device { int dpms_mode; int hpd_gpio; bool force_hpd; - unsigned char edid[EDID_BLOCK_LENGTH * 2]; bool psr_support; struct mutex panel_lock; @@ -210,33 +201,6 @@ void analogix_dp_reset_aux(struct analogix_dp_device *dp); void analogix_dp_init_aux(struct analogix_dp_device *dp); int analogix_dp_get_plug_in_status(struct analogix_dp_device *dp); void analogix_dp_enable_sw_function(struct analogix_dp_device *dp); -int analogix_dp_start_aux_transaction(struct analogix_dp_device *dp); -int analogix_dp_write_byte_to_dpcd(struct analogix_dp_device *dp, - unsigned int reg_addr, - unsigned char data); -int analogix_dp_read_byte_from_dpcd(struct analogix_dp_device *dp, - unsigned int reg_addr, - unsigned char *data); -int analogix_dp_write_bytes_to_dpcd(struct analogix_dp_device *dp, - unsigned int reg_addr, - unsigned int count, - unsigned char data[]); -int analogix_dp_read_bytes_from_dpcd(struct analogix_dp_device *dp, - unsigned int reg_addr, - unsigned int count, - unsigned char data[]); -int analogix_dp_select_i2c_device(struct analogix_dp_device *dp, - unsigned int device_addr, - unsigned int reg_addr); -int analogix_dp_read_byte_from_i2c(struct analogix_dp_device *dp, - unsigned int device_addr, - unsigned int reg_addr, - unsigned int *data); -int analogix_dp_read_bytes_from_i2c(struct analogix_dp_device *dp, - unsigned int device_addr, - unsigned int reg_addr, - unsigned int count, - unsigned char edid[]); void analogix_dp_set_link_bandwidth(struct analogix_dp_device *dp, u32 bwtype); void analogix_dp_get_link_bandwidth(struct analogix_dp_device *dp, u32 *bwtype); void analogix_dp_set_lane_count(struct analogix_dp_device *dp, u32 count); @@ -285,5 +249,7 @@ void analogix_dp_disable_scrambling(struct analogix_dp_device *dp); void analogix_dp_enable_psr_crc(struct analogix_dp_device *dp); void analogix_dp_send_psr_spd(struct analogix_dp_device *dp, struct edp_vsc_psr *vsc); +ssize_t analogix_dp_transfer(struct analogix_dp_device *dp, + struct drm_dp_aux_msg *msg); #endif /* _ANALOGIX_DP_CORE_H */ diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c index fae0293..cd37ac0 100644 --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c @@ -585,330 +585,6 @@ int analogix_dp_write_byte_to_dpcd(struct analogix_dp_device *dp, return retval; } -int analogix_dp_read_byte_from_dpcd(struct analogix_dp_device *dp, - unsigned int reg_addr, - unsigned char *data) -{ - u32 reg; - int i; - int retval; - - for (i = 0; i < 3; i++) { - /* Clear AUX CH data buffer */ - reg = BUF_CLR; - writel(reg, dp->reg_base + ANALOGIX_DP_BUFFER_DATA_CTL); - - /* Select DPCD device address */ - reg = AUX_ADDR_7_0(reg_addr); - writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_7_0); - reg = AUX_ADDR_15_8(reg_addr); - writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_15_8); - reg = AUX_ADDR_19_16(reg_addr); - writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_19_16); - - /* - * Set DisplayPort transaction and read 1 byte - * If bit 3 is 1, DisplayPort transaction. - * If Bit 3 is 0, I2C transaction. - */ - reg = AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ; - writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_1); - - /* Start AUX transaction */ - retval = analogix_dp_start_aux_transaction(dp); - if (retval == 0) - break; - - dev_dbg(dp->dev, "%s: Aux Transaction fail!\n", __func__); - } - - /* Read data buffer */ - reg = readl(dp->reg_base + ANALOGIX_DP_BUF_DATA_0); - *data = (unsigned char)(reg & 0xff); - - return retval; -} - -int analogix_dp_write_bytes_to_dpcd(struct analogix_dp_device *dp, - unsigned int reg_addr, - unsigned int count, - unsigned char data[]) -{ - u32 reg; - unsigned int start_offset; - unsigned int cur_data_count; - unsigned int cur_data_idx; - int i; - int retval = 0; - - /* Clear AUX CH data buffer */ - reg = BUF_CLR; - writel(reg, dp->reg_base + ANALOGIX_DP_BUFFER_DATA_CTL); - - start_offset = 0; - while (start_offset < count) { - /* Buffer size of AUX CH is 16 * 4bytes */ - if ((count - start_offset) > 16) - cur_data_count = 16; - else - cur_data_count = count - start_offset; - - for (i = 0; i < 3; i++) { - /* Select DPCD device address */ - reg = AUX_ADDR_7_0(reg_addr + start_offset); - writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_7_0); - reg = AUX_ADDR_15_8(reg_addr + start_offset); - writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_15_8); - reg = AUX_ADDR_19_16(reg_addr + start_offset); - writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_19_16); - - for (cur_data_idx = 0; cur_data_idx < cur_data_count; - cur_data_idx++) { - reg = data[start_offset + cur_data_idx]; - writel(reg, dp->reg_base + - ANALOGIX_DP_BUF_DATA_0 + - 4 * cur_data_idx); - } - - /* - * Set DisplayPort transaction and write - * If bit 3 is 1, DisplayPort transaction. - * If Bit 3 is 0, I2C transaction. - */ - reg = AUX_LENGTH(cur_data_count) | - AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_WRITE; - writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_1); - - /* Start AUX transaction */ - retval = analogix_dp_start_aux_transaction(dp); - if (retval == 0) - break; - - dev_dbg(dp->dev, "%s: Aux Transaction fail!\n", - __func__); - } - - start_offset += cur_data_count; - } - - return retval; -} - -int analogix_dp_read_bytes_from_dpcd(struct analogix_dp_device *dp, - unsigned int reg_addr, - unsigned int count, - unsigned char data[]) -{ - u32 reg; - unsigned int start_offset; - unsigned int cur_data_count; - unsigned int cur_data_idx; - int i; - int retval = 0; - - /* Clear AUX CH data buffer */ - reg = BUF_CLR; - writel(reg, dp->reg_base + ANALOGIX_DP_BUFFER_DATA_CTL); - - start_offset = 0; - while (start_offset < count) { - /* Buffer size of AUX CH is 16 * 4bytes */ - if ((count - start_offset) > 16) - cur_data_count = 16; - else - cur_data_count = count - start_offset; - - /* AUX CH Request Transaction process */ - for (i = 0; i < 3; i++) { - /* Select DPCD device address */ - reg = AUX_ADDR_7_0(reg_addr + start_offset); - writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_7_0); - reg = AUX_ADDR_15_8(reg_addr + start_offset); - writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_15_8); - reg = AUX_ADDR_19_16(reg_addr + start_offset); - writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_19_16); - - /* - * Set DisplayPort transaction and read - * If bit 3 is 1, DisplayPort transaction. - * If Bit 3 is 0, I2C transaction. - */ - reg = AUX_LENGTH(cur_data_count) | - AUX_TX_COMM_DP_TRANSACTION | AUX_TX_COMM_READ; - writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_1); - - /* Start AUX transaction */ - retval = analogix_dp_start_aux_transaction(dp); - if (retval == 0) - break; - - dev_dbg(dp->dev, "%s: Aux Transaction fail!\n", - __func__); - } - - for (cur_data_idx = 0; cur_data_idx < cur_data_count; - cur_data_idx++) { - reg = readl(dp->reg_base + ANALOGIX_DP_BUF_DATA_0 - + 4 * cur_data_idx); - data[start_offset + cur_data_idx] = - (unsigned char)reg; - } - - start_offset += cur_data_count; - } - - return retval; -} - -int analogix_dp_select_i2c_device(struct analogix_dp_device *dp, - unsigned int device_addr, - unsigned int reg_addr) -{ - u32 reg; - int retval; - - /* Set EDID device address */ - reg = device_addr; - writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_7_0); - writel(0x0, dp->reg_base + ANALOGIX_DP_AUX_ADDR_15_8); - writel(0x0, dp->reg_base + ANALOGIX_DP_AUX_ADDR_19_16); - - /* Set offset from base address of EDID device */ - writel(reg_addr, dp->reg_base + ANALOGIX_DP_BUF_DATA_0); - - /* - * Set I2C transaction and write address - * If bit 3 is 1, DisplayPort transaction. - * If Bit 3 is 0, I2C transaction. - */ - reg = AUX_TX_COMM_I2C_TRANSACTION | AUX_TX_COMM_MOT | - AUX_TX_COMM_WRITE; - writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_1); - - /* Start AUX transaction */ - retval = analogix_dp_start_aux_transaction(dp); - if (retval != 0) - dev_dbg(dp->dev, "%s: Aux Transaction fail!\n", __func__); - - return retval; -} - -int analogix_dp_read_byte_from_i2c(struct analogix_dp_device *dp, - unsigned int device_addr, - unsigned int reg_addr, - unsigned int *data) -{ - u32 reg; - int i; - int retval; - - for (i = 0; i < 3; i++) { - /* Clear AUX CH data buffer */ - reg = BUF_CLR; - writel(reg, dp->reg_base + ANALOGIX_DP_BUFFER_DATA_CTL); - - /* Select EDID device */ - retval = analogix_dp_select_i2c_device(dp, device_addr, - reg_addr); - if (retval != 0) - continue; - - /* - * Set I2C transaction and read data - * If bit 3 is 1, DisplayPort transaction. - * If Bit 3 is 0, I2C transaction. - */ - reg = AUX_TX_COMM_I2C_TRANSACTION | - AUX_TX_COMM_READ; - writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_1); - - /* Start AUX transaction */ - retval = analogix_dp_start_aux_transaction(dp); - if (retval == 0) - break; - - dev_dbg(dp->dev, "%s: Aux Transaction fail!\n", __func__); - } - - /* Read data */ - if (retval == 0) - *data = readl(dp->reg_base + ANALOGIX_DP_BUF_DATA_0); - - return retval; -} - -int analogix_dp_read_bytes_from_i2c(struct analogix_dp_device *dp, - unsigned int device_addr, - unsigned int reg_addr, - unsigned int count, - unsigned char edid[]) -{ - u32 reg; - unsigned int i, j; - unsigned int cur_data_idx; - unsigned int defer = 0; - int retval = 0; - - for (i = 0; i < count; i += 16) { - for (j = 0; j < 3; j++) { - /* Clear AUX CH data buffer */ - reg = BUF_CLR; - writel(reg, dp->reg_base + ANALOGIX_DP_BUFFER_DATA_CTL); - - /* Set normal AUX CH command */ - reg = readl(dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_2); - reg &= ~ADDR_ONLY; - writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_2); - - /* - * If Rx sends defer, Tx sends only reads - * request without sending address - */ - if (!defer) - retval = analogix_dp_select_i2c_device(dp, - device_addr, reg_addr + i); - else - defer = 0; - - if (retval == 0) { - /* - * Set I2C transaction and write data - * If bit 3 is 1, DisplayPort transaction. - * If Bit 3 is 0, I2C transaction. - */ - reg = AUX_LENGTH(16) | - AUX_TX_COMM_I2C_TRANSACTION | - AUX_TX_COMM_READ; - writel(reg, dp->reg_base + - ANALOGIX_DP_AUX_CH_CTL_1); - - /* Start AUX transaction */ - retval = analogix_dp_start_aux_transaction(dp); - if (retval == 0) - break; - - dev_dbg(dp->dev, "%s: Aux Transaction fail!\n", - __func__); - } - /* Check if Rx sends defer */ - reg = readl(dp->reg_base + ANALOGIX_DP_AUX_RX_COMM); - if (reg == AUX_RX_COMM_AUX_DEFER || - reg == AUX_RX_COMM_I2C_DEFER) { - dev_err(dp->dev, "Defer: %d\n\n", reg); - defer = 1; - } - } - - for (cur_data_idx = 0; cur_data_idx < 16; cur_data_idx++) { - reg = readl(dp->reg_base + ANALOGIX_DP_BUF_DATA_0 - + 4 * cur_data_idx); - edid[i + cur_data_idx] = (unsigned char)reg; - } - } - - return retval; -} - void analogix_dp_set_link_bandwidth(struct analogix_dp_device *dp, u32 bwtype) { u32 reg; @@ -1361,3 +1037,130 @@ void analogix_dp_send_psr_spd(struct analogix_dp_device *dp, val |= IF_EN; writel(val, dp->reg_base + ANALOGIX_DP_PKT_SEND_CTL); } + +ssize_t analogix_dp_transfer(struct analogix_dp_device *dp, + struct drm_dp_aux_msg *msg) +{ + u32 reg; + u8 *buffer = msg->buffer; + int timeout_loop = 0; + unsigned int i; + int num_transferred = 0; + + /* Buffer size of AUX CH is 16 bytes */ + if (WARN_ON(msg->size > 16)) + return -E2BIG; + + /* Clear AUX CH data buffer */ + reg = BUF_CLR; + writel(reg, dp->reg_base + ANALOGIX_DP_BUFFER_DATA_CTL); + + switch (msg->request & ~DP_AUX_I2C_MOT) { + case DP_AUX_I2C_WRITE: + reg = AUX_TX_COMM_WRITE | AUX_TX_COMM_I2C_TRANSACTION; + if (msg->request & DP_AUX_I2C_MOT) + reg |= AUX_TX_COMM_MOT; + break; + + case DP_AUX_I2C_READ: + reg = AUX_TX_COMM_READ | AUX_TX_COMM_I2C_TRANSACTION; + if (msg->request & DP_AUX_I2C_MOT) + reg |= AUX_TX_COMM_MOT; + break; + + case DP_AUX_NATIVE_WRITE: + reg = AUX_TX_COMM_WRITE | AUX_TX_COMM_DP_TRANSACTION; + break; + + case DP_AUX_NATIVE_READ: + reg = AUX_TX_COMM_READ | AUX_TX_COMM_DP_TRANSACTION; + break; + + default: + return -EINVAL; + } + + reg |= AUX_LENGTH(msg->size); + writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_1); + + /* Select DPCD device address */ + reg = AUX_ADDR_7_0(msg->address); + writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_7_0); + reg = AUX_ADDR_15_8(msg->address); + writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_15_8); + reg = AUX_ADDR_19_16(msg->address); + writel(reg, dp->reg_base + ANALOGIX_DP_AUX_ADDR_19_16); + + if (!(msg->request & DP_AUX_I2C_READ)) { + for (i = 0; i < msg->size; i++) { + reg = buffer[i]; + writel(reg, dp->reg_base + ANALOGIX_DP_BUF_DATA_0 + + 4 * i); + num_transferred++; + } + } + + /* Enable AUX CH operation */ + reg = AUX_EN; + + /* Zero-sized messages specify address-only transactions. */ + if (msg->size < 1) + reg |= ADDR_ONLY; + + writel(reg, dp->reg_base + ANALOGIX_DP_AUX_CH_CTL_2); + + /* Is AUX CH command reply received? */ + /* TODO: Wait for an interrupt instead of looping? */ + reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA); + while (!(reg & RPLY_RECEIV)) { + timeout_loop++; + if (timeout_loop > DP_TIMEOUT_LOOP_COUNT) { + dev_err(dp->dev, "AUX CH command reply failed!\n"); + return -ETIMEDOUT; + } + reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA); + usleep_range(10, 11); + } + + /* Clear interrupt source for AUX CH command reply */ + writel(RPLY_RECEIV, dp->reg_base + ANALOGIX_DP_INT_STA); + + /* Clear interrupt source for AUX CH access error */ + reg = readl(dp->reg_base + ANALOGIX_DP_INT_STA); + if (reg & AUX_ERR) { + writel(AUX_ERR, dp->reg_base + ANALOGIX_DP_INT_STA); + return -EREMOTEIO; + } + + /* Check AUX CH error access status */ + reg = readl(dp->reg_base + ANALOGIX_DP_AUX_CH_STA); + if ((reg & AUX_STATUS_MASK)) { + dev_err(dp->dev, "AUX CH error happened: %d\n\n", + reg & AUX_STATUS_MASK); + return -EREMOTEIO; + } + + if (msg->request & DP_AUX_I2C_READ) { + for (i = 0; i < msg->size; i++) { + reg = readl(dp->reg_base + ANALOGIX_DP_BUF_DATA_0 + + 4 * i); + buffer[i] = (unsigned char)reg; + num_transferred++; + } + } + + /* Check if Rx sends defer */ + reg = readl(dp->reg_base + ANALOGIX_DP_AUX_RX_COMM); + if (reg == AUX_RX_COMM_AUX_DEFER) + msg->reply = DP_AUX_NATIVE_REPLY_DEFER; + else if (reg == AUX_RX_COMM_I2C_DEFER) + msg->reply = DP_AUX_I2C_REPLY_DEFER; + else if ((msg->request & ~DP_AUX_I2C_MOT) == DP_AUX_I2C_WRITE || + (msg->request & ~DP_AUX_I2C_MOT) == DP_AUX_I2C_READ) + msg->reply = DP_AUX_I2C_REPLY_ACK; + else if ((msg->request & ~DP_AUX_I2C_MOT) == DP_AUX_NATIVE_WRITE || + (msg->request & ~DP_AUX_I2C_MOT) == DP_AUX_NATIVE_READ) + msg->reply = DP_AUX_NATIVE_REPLY_ACK; + + return num_transferred; +} |