diff options
Diffstat (limited to 'drivers/gpu/drm/drm_blend.c')
-rw-r--r-- | drivers/gpu/drm/drm_blend.c | 238 |
1 files changed, 238 insertions, 0 deletions
diff --git a/drivers/gpu/drm/drm_blend.c b/drivers/gpu/drm/drm_blend.c new file mode 100644 index 0000000..f3c0942 --- /dev/null +++ b/drivers/gpu/drm/drm_blend.c @@ -0,0 +1,238 @@ +/* + * Copyright (C) 2016 Samsung Electronics Co.Ltd + * Authors: + * Marek Szyprowski <m.szyprowski@samsung.com> + * + * DRM core plane blending related functions + * + * Permission to use, copy, modify, distribute, and sell this software and its + * documentation for any purpose is hereby granted without fee, provided that + * the above copyright notice appear in all copies and that both that copyright + * notice and this permission notice appear in supporting documentation, and + * that the name of the copyright holders not be used in advertising or + * publicity pertaining to distribution of the software without specific, + * written prior permission. The copyright holders make no representations + * about the suitability of this software for any purpose. It is provided "as + * is" without express or implied warranty. + * + * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO + * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR + * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, + * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER + * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE + * OF THIS SOFTWARE. + */ +#include <drm/drmP.h> +#include <drm/drm_atomic.h> +#include <drm/drm_crtc.h> +#include <linux/export.h> +#include <linux/slab.h> +#include <linux/sort.h> + +#include "drm_internal.h" + +/** + * drm_plane_create_zpos_property - create mutable zpos property + * @plane: drm plane + * @zpos: initial value of zpos property + * @min: minimal possible value of zpos property + * @max: maximal possible value of zpos property + * + * This function initializes generic mutable zpos property and enables support + * for it in drm core. Drivers can then attach this property to planes to enable + * support for configurable planes arrangement during blending operation. + * Once mutable zpos property has been enabled, the DRM core will automatically + * calculate drm_plane_state->normalized_zpos values. Usually min should be set + * to 0 and max to maximal number of planes for given crtc - 1. + * + * If zpos of some planes cannot be changed (like fixed background or + * cursor/topmost planes), driver should adjust min/max values and assign those + * planes immutable zpos property with lower or higher values (for more + * information, see drm_mode_create_zpos_immutable_property() function). In such + * case driver should also assign proper initial zpos values for all planes in + * its plane_reset() callback, so the planes will be always sorted properly. + * + * Returns: + * Zero on success, negative errno on failure. + */ +int drm_plane_create_zpos_property(struct drm_plane *plane, + unsigned int zpos, + unsigned int min, unsigned int max) +{ + struct drm_property *prop; + + prop = drm_property_create_range(plane->dev, 0, "zpos", min, max); + if (!prop) + return -ENOMEM; + + drm_object_attach_property(&plane->base, prop, zpos); + + plane->zpos_property = prop; + + if (plane->state) { + plane->state->zpos = zpos; + plane->state->normalized_zpos = zpos; + } + + return 0; +} +EXPORT_SYMBOL(drm_plane_create_zpos_property); + +/** + * drm_plane_create_zpos_immutable_property - create immuttable zpos property + * @plane: drm plane + * @zpos: value of zpos property + * + * This function initializes generic immutable zpos property and enables + * support for it in drm core. Using this property driver lets userspace + * to get the arrangement of the planes for blending operation and notifies + * it that the hardware (or driver) doesn't support changing of the planes' + * order. + * + * Returns: + * Zero on success, negative errno on failure. + */ +int drm_plane_create_zpos_immutable_property(struct drm_plane *plane, + unsigned int zpos) +{ + struct drm_property *prop; + + prop = drm_property_create_range(plane->dev, DRM_MODE_PROP_IMMUTABLE, + "zpos", zpos, zpos); + if (!prop) + return -ENOMEM; + + drm_object_attach_property(&plane->base, prop, zpos); + + plane->zpos_property = prop; + + if (plane->state) { + plane->state->zpos = zpos; + plane->state->normalized_zpos = zpos; + } + + return 0; +} +EXPORT_SYMBOL(drm_plane_create_zpos_immutable_property); + +static int drm_atomic_state_zpos_cmp(const void *a, const void *b) +{ + const struct drm_plane_state *sa = *(struct drm_plane_state **)a; + const struct drm_plane_state *sb = *(struct drm_plane_state **)b; + + if (sa->zpos != sb->zpos) + return sa->zpos - sb->zpos; + else + return sa->plane->base.id - sb->plane->base.id; +} + +/** + * drm_atomic_helper_crtc_normalize_zpos - calculate normalized zpos values + * @crtc: crtc with planes, which have to be considered for normalization + * @crtc_state: new atomic state to apply + * + * This function checks new states of all planes assigned to given crtc and + * calculates normalized zpos value for them. Planes are compared first by their + * zpos values, then by plane id (if zpos equals). Plane with lowest zpos value + * is at the bottom. The plane_state->normalized_zpos is then filled with unique + * values from 0 to number of active planes in crtc minus one. + * + * RETURNS + * Zero for success or -errno + */ +static int drm_atomic_helper_crtc_normalize_zpos(struct drm_crtc *crtc, + struct drm_crtc_state *crtc_state) +{ + struct drm_atomic_state *state = crtc_state->state; + struct drm_device *dev = crtc->dev; + int total_planes = dev->mode_config.num_total_plane; + struct drm_plane_state **states; + struct drm_plane *plane; + int i, n = 0; + int ret = 0; + + DRM_DEBUG_ATOMIC("[CRTC:%d:%s] calculating normalized zpos values\n", + crtc->base.id, crtc->name); + + states = kmalloc_array(total_planes, sizeof(*states), GFP_TEMPORARY); + if (!states) + return -ENOMEM; + + /* + * Normalization process might create new states for planes which + * normalized_zpos has to be recalculated. + */ + drm_for_each_plane_mask(plane, dev, crtc_state->plane_mask) { + struct drm_plane_state *plane_state = + drm_atomic_get_plane_state(state, plane); + if (IS_ERR(plane_state)) { + ret = PTR_ERR(plane_state); + goto done; + } + states[n++] = plane_state; + DRM_DEBUG_ATOMIC("[PLANE:%d:%s] processing zpos value %d\n", + plane->base.id, plane->name, + plane_state->zpos); + } + + sort(states, n, sizeof(*states), drm_atomic_state_zpos_cmp, NULL); + + for (i = 0; i < n; i++) { + plane = states[i]->plane; + + states[i]->normalized_zpos = i; + DRM_DEBUG_ATOMIC("[PLANE:%d:%s] normalized zpos value %d\n", + plane->base.id, plane->name, i); + } + crtc_state->zpos_changed = true; + +done: + kfree(states); + return ret; +} + +/** + * drm_atomic_helper_normalize_zpos - calculate normalized zpos values for all + * crtcs + * @dev: DRM device + * @state: atomic state of DRM device + * + * This function calculates normalized zpos value for all modified planes in + * the provided atomic state of DRM device. For more information, see + * drm_atomic_helper_crtc_normalize_zpos() function. + * + * RETURNS + * Zero for success or -errno + */ +int drm_atomic_helper_normalize_zpos(struct drm_device *dev, + struct drm_atomic_state *state) +{ + struct drm_crtc *crtc; + struct drm_crtc_state *crtc_state; + struct drm_plane *plane; + struct drm_plane_state *plane_state; + int i, ret = 0; + + for_each_plane_in_state(state, plane, plane_state, i) { + crtc = plane_state->crtc; + if (!crtc) + continue; + if (plane->state->zpos != plane_state->zpos) { + crtc_state = + drm_atomic_get_existing_crtc_state(state, crtc); + crtc_state->zpos_changed = true; + } + } + + for_each_crtc_in_state(state, crtc, crtc_state, i) { + if (crtc_state->plane_mask != crtc->state->plane_mask || + crtc_state->zpos_changed) { + ret = drm_atomic_helper_crtc_normalize_zpos(crtc, + crtc_state); + if (ret) + return ret; + } + } + return 0; +} |