diff options
Diffstat (limited to 'drivers/gpu/drm/gma500/tc35876x-dsi-lvds.c')
| -rw-r--r-- | drivers/gpu/drm/gma500/tc35876x-dsi-lvds.c | 829 |
1 files changed, 829 insertions, 0 deletions
diff --git a/drivers/gpu/drm/gma500/tc35876x-dsi-lvds.c b/drivers/gpu/drm/gma500/tc35876x-dsi-lvds.c new file mode 100644 index 0000000..4a07ab5 --- /dev/null +++ b/drivers/gpu/drm/gma500/tc35876x-dsi-lvds.c @@ -0,0 +1,829 @@ +/* + * Copyright © 2011 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + */ + +#include "mdfld_dsi_dpi.h" +#include "mdfld_output.h" +#include "mdfld_dsi_pkg_sender.h" +#include "tc35876x-dsi-lvds.h" +#include <linux/i2c/tc35876x.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <asm/intel_scu_ipc.h> + +static struct i2c_client *tc35876x_client; +static struct i2c_client *cmi_lcd_i2c_client; + +#define FLD_MASK(start, end) (((1 << ((start) - (end) + 1)) - 1) << (end)) +#define FLD_VAL(val, start, end) (((val) << (end)) & FLD_MASK(start, end)) + +/* DSI D-PHY Layer Registers */ +#define D0W_DPHYCONTTX 0x0004 +#define CLW_DPHYCONTRX 0x0020 +#define D0W_DPHYCONTRX 0x0024 +#define D1W_DPHYCONTRX 0x0028 +#define D2W_DPHYCONTRX 0x002C +#define D3W_DPHYCONTRX 0x0030 +#define COM_DPHYCONTRX 0x0038 +#define CLW_CNTRL 0x0040 +#define D0W_CNTRL 0x0044 +#define D1W_CNTRL 0x0048 +#define D2W_CNTRL 0x004C +#define D3W_CNTRL 0x0050 +#define DFTMODE_CNTRL 0x0054 + +/* DSI PPI Layer Registers */ +#define PPI_STARTPPI 0x0104 +#define PPI_BUSYPPI 0x0108 +#define PPI_LINEINITCNT 0x0110 +#define PPI_LPTXTIMECNT 0x0114 +#define PPI_LANEENABLE 0x0134 +#define PPI_TX_RX_TA 0x013C +#define PPI_CLS_ATMR 0x0140 +#define PPI_D0S_ATMR 0x0144 +#define PPI_D1S_ATMR 0x0148 +#define PPI_D2S_ATMR 0x014C +#define PPI_D3S_ATMR 0x0150 +#define PPI_D0S_CLRSIPOCOUNT 0x0164 +#define PPI_D1S_CLRSIPOCOUNT 0x0168 +#define PPI_D2S_CLRSIPOCOUNT 0x016C +#define PPI_D3S_CLRSIPOCOUNT 0x0170 +#define CLS_PRE 0x0180 +#define D0S_PRE 0x0184 +#define D1S_PRE 0x0188 +#define D2S_PRE 0x018C +#define D3S_PRE 0x0190 +#define CLS_PREP 0x01A0 +#define D0S_PREP 0x01A4 +#define D1S_PREP 0x01A8 +#define D2S_PREP 0x01AC +#define D3S_PREP 0x01B0 +#define CLS_ZERO 0x01C0 +#define D0S_ZERO 0x01C4 +#define D1S_ZERO 0x01C8 +#define D2S_ZERO 0x01CC +#define D3S_ZERO 0x01D0 +#define PPI_CLRFLG 0x01E0 +#define PPI_CLRSIPO 0x01E4 +#define HSTIMEOUT 0x01F0 +#define HSTIMEOUTENABLE 0x01F4 + +/* DSI Protocol Layer Registers */ +#define DSI_STARTDSI 0x0204 +#define DSI_BUSYDSI 0x0208 +#define DSI_LANEENABLE 0x0210 +#define DSI_LANESTATUS0 0x0214 +#define DSI_LANESTATUS1 0x0218 +#define DSI_INTSTATUS 0x0220 +#define DSI_INTMASK 0x0224 +#define DSI_INTCLR 0x0228 +#define DSI_LPTXTO 0x0230 + +/* DSI General Registers */ +#define DSIERRCNT 0x0300 + +/* DSI Application Layer Registers */ +#define APLCTRL 0x0400 +#define RDPKTLN 0x0404 + +/* Video Path Registers */ +#define VPCTRL 0x0450 +#define HTIM1 0x0454 +#define HTIM2 0x0458 +#define VTIM1 0x045C +#define VTIM2 0x0460 +#define VFUEN 0x0464 + +/* LVDS Registers */ +#define LVMX0003 0x0480 +#define LVMX0407 0x0484 +#define LVMX0811 0x0488 +#define LVMX1215 0x048C +#define LVMX1619 0x0490 +#define LVMX2023 0x0494 +#define LVMX2427 0x0498 +#define LVCFG 0x049C +#define LVPHY0 0x04A0 +#define LVPHY1 0x04A4 + +/* System Registers */ +#define SYSSTAT 0x0500 +#define SYSRST 0x0504 + +/* GPIO Registers */ +/*#define GPIOC 0x0520*/ +#define GPIOO 0x0524 +#define GPIOI 0x0528 + +/* I2C Registers */ +#define I2CTIMCTRL 0x0540 +#define I2CMADDR 0x0544 +#define WDATAQ 0x0548 +#define RDATAQ 0x054C + +/* Chip/Rev Registers */ +#define IDREG 0x0580 + +/* Debug Registers */ +#define DEBUG00 0x05A0 +#define DEBUG01 0x05A4 + +/* Panel CABC registers */ +#define PANEL_PWM_CONTROL 0x90 +#define PANEL_FREQ_DIVIDER_HI 0x91 +#define PANEL_FREQ_DIVIDER_LO 0x92 +#define PANEL_DUTY_CONTROL 0x93 +#define PANEL_MODIFY_RGB 0x94 +#define PANEL_FRAMERATE_CONTROL 0x96 +#define PANEL_PWM_MIN 0x97 +#define PANEL_PWM_REF 0x98 +#define PANEL_PWM_MAX 0x99 +#define PANEL_ALLOW_DISTORT 0x9A +#define PANEL_BYPASS_PWMI 0x9B + +/* Panel color management registers */ +#define PANEL_CM_ENABLE 0x700 +#define PANEL_CM_HUE 0x701 +#define PANEL_CM_SATURATION 0x702 +#define PANEL_CM_INTENSITY 0x703 +#define PANEL_CM_BRIGHTNESS 0x704 +#define PANEL_CM_CE_ENABLE 0x705 +#define PANEL_CM_PEAK_EN 0x710 +#define PANEL_CM_GAIN 0x711 +#define PANEL_CM_HUETABLE_START 0x730 +#define PANEL_CM_HUETABLE_END 0x747 /* inclusive */ + +/* Input muxing for registers LVMX0003...LVMX2427 */ +enum { + INPUT_R0, /* 0 */ + INPUT_R1, + INPUT_R2, + INPUT_R3, + INPUT_R4, + INPUT_R5, + INPUT_R6, + INPUT_R7, + INPUT_G0, /* 8 */ + INPUT_G1, + INPUT_G2, + INPUT_G3, + INPUT_G4, + INPUT_G5, + INPUT_G6, + INPUT_G7, + INPUT_B0, /* 16 */ + INPUT_B1, + INPUT_B2, + INPUT_B3, + INPUT_B4, + INPUT_B5, + INPUT_B6, + INPUT_B7, + INPUT_HSYNC, /* 24 */ + INPUT_VSYNC, + INPUT_DE, + LOGIC_0, + /* 28...31 undefined */ +}; + +#define INPUT_MUX(lvmx03, lvmx02, lvmx01, lvmx00) \ + (FLD_VAL(lvmx03, 29, 24) | FLD_VAL(lvmx02, 20, 16) | \ + FLD_VAL(lvmx01, 12, 8) | FLD_VAL(lvmx00, 4, 0)) + +/** + * tc35876x_regw - Write DSI-LVDS bridge register using I2C + * @client: struct i2c_client to use + * @reg: register address + * @value: value to write + * + * Returns 0 on success, or a negative error value. + */ +static int tc35876x_regw(struct i2c_client *client, u16 reg, u32 value) +{ + int r; + u8 tx_data[] = { + /* NOTE: Register address big-endian, data little-endian. */ + (reg >> 8) & 0xff, + reg & 0xff, + value & 0xff, + (value >> 8) & 0xff, + (value >> 16) & 0xff, + (value >> 24) & 0xff, + }; + struct i2c_msg msgs[] = { + { + .addr = client->addr, + .flags = 0, + .buf = tx_data, + .len = ARRAY_SIZE(tx_data), + }, + }; + + r = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (r < 0) { + dev_err(&client->dev, "%s: reg 0x%04x val 0x%08x error %d\n", + __func__, reg, value, r); + return r; + } + + if (r < ARRAY_SIZE(msgs)) { + dev_err(&client->dev, "%s: reg 0x%04x val 0x%08x msgs %d\n", + __func__, reg, value, r); + return -EAGAIN; + } + + dev_dbg(&client->dev, "%s: reg 0x%04x val 0x%08x\n", + __func__, reg, value); + + return 0; +} + +/** + * tc35876x_regr - Read DSI-LVDS bridge register using I2C + * @client: struct i2c_client to use + * @reg: register address + * @value: pointer for storing the value + * + * Returns 0 on success, or a negative error value. + */ +static int tc35876x_regr(struct i2c_client *client, u16 reg, u32 *value) +{ + int r; + u8 tx_data[] = { + (reg >> 8) & 0xff, + reg & 0xff, + }; + u8 rx_data[4]; + struct i2c_msg msgs[] = { + { + .addr = client->addr, + .flags = 0, + .buf = tx_data, + .len = ARRAY_SIZE(tx_data), + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .buf = rx_data, + .len = ARRAY_SIZE(rx_data), + }, + }; + + r = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs)); + if (r < 0) { + dev_err(&client->dev, "%s: reg 0x%04x error %d\n", __func__, + reg, r); + return r; + } + + if (r < ARRAY_SIZE(msgs)) { + dev_err(&client->dev, "%s: reg 0x%04x msgs %d\n", __func__, + reg, r); + return -EAGAIN; + } + + *value = rx_data[0] << 24 | rx_data[1] << 16 | + rx_data[2] << 8 | rx_data[3]; + + dev_dbg(&client->dev, "%s: reg 0x%04x value 0x%08x\n", __func__, + reg, *value); + + return 0; +} + +void tc35876x_set_bridge_reset_state(struct drm_device *dev, int state) +{ + struct tc35876x_platform_data *pdata; + + if (WARN(!tc35876x_client, "%s called before probe", __func__)) + return; + + dev_dbg(&tc35876x_client->dev, "%s: state %d\n", __func__, state); + + pdata = dev_get_platdata(&tc35876x_client->dev); + + if (pdata->gpio_bridge_reset == -1) + return; + + if (state) { + gpio_set_value_cansleep(pdata->gpio_bridge_reset, 0); + mdelay(10); + } else { + /* Pull MIPI Bridge reset pin to Low */ + gpio_set_value_cansleep(pdata->gpio_bridge_reset, 0); + mdelay(20); + /* Pull MIPI Bridge reset pin to High */ + gpio_set_value_cansleep(pdata->gpio_bridge_reset, 1); + mdelay(40); + } +} + +void tc35876x_configure_lvds_bridge(struct drm_device *dev) +{ + struct i2c_client *i2c = tc35876x_client; + u32 ppi_lptxtimecnt; + u32 txtagocnt; + u32 txtasurecnt; + u32 id; + + if (WARN(!tc35876x_client, "%s called before probe", __func__)) + return; + + dev_dbg(&tc35876x_client->dev, "%s\n", __func__); + + if (!tc35876x_regr(i2c, IDREG, &id)) + dev_info(&tc35876x_client->dev, "tc35876x ID 0x%08x\n", id); + else + dev_err(&tc35876x_client->dev, "Cannot read ID\n"); + + ppi_lptxtimecnt = 4; + txtagocnt = (5 * ppi_lptxtimecnt - 3) / 4; + txtasurecnt = 3 * ppi_lptxtimecnt / 2; + tc35876x_regw(i2c, PPI_TX_RX_TA, FLD_VAL(txtagocnt, 26, 16) | + FLD_VAL(txtasurecnt, 10, 0)); + tc35876x_regw(i2c, PPI_LPTXTIMECNT, FLD_VAL(ppi_lptxtimecnt, 10, 0)); + + tc35876x_regw(i2c, PPI_D0S_CLRSIPOCOUNT, FLD_VAL(1, 5, 0)); + tc35876x_regw(i2c, PPI_D1S_CLRSIPOCOUNT, FLD_VAL(1, 5, 0)); + tc35876x_regw(i2c, PPI_D2S_CLRSIPOCOUNT, FLD_VAL(1, 5, 0)); + tc35876x_regw(i2c, PPI_D3S_CLRSIPOCOUNT, FLD_VAL(1, 5, 0)); + + /* Enabling MIPI & PPI lanes, Enable 4 lanes */ + tc35876x_regw(i2c, PPI_LANEENABLE, + BIT(4) | BIT(3) | BIT(2) | BIT(1) | BIT(0)); + tc35876x_regw(i2c, DSI_LANEENABLE, + BIT(4) | BIT(3) | BIT(2) | BIT(1) | BIT(0)); + tc35876x_regw(i2c, PPI_STARTPPI, BIT(0)); + tc35876x_regw(i2c, DSI_STARTDSI, BIT(0)); + + /* Setting LVDS output frequency */ + tc35876x_regw(i2c, LVPHY0, FLD_VAL(1, 20, 16) | + FLD_VAL(2, 15, 14) | FLD_VAL(6, 4, 0)); /* 0x00048006 */ + + /* Setting video panel control register,0x00000120 VTGen=ON ?!?!? */ + tc35876x_regw(i2c, VPCTRL, BIT(8) | BIT(5)); + + /* Horizontal back porch and horizontal pulse width. 0x00280028 */ + tc35876x_regw(i2c, HTIM1, FLD_VAL(40, 24, 16) | FLD_VAL(40, 8, 0)); + + /* Horizontal front porch and horizontal active video size. 0x00500500*/ + tc35876x_regw(i2c, HTIM2, FLD_VAL(80, 24, 16) | FLD_VAL(1280, 10, 0)); + + /* Vertical back porch and vertical sync pulse width. 0x000e000a */ + tc35876x_regw(i2c, VTIM1, FLD_VAL(14, 23, 16) | FLD_VAL(10, 7, 0)); + + /* Vertical front porch and vertical display size. 0x000e0320 */ + tc35876x_regw(i2c, VTIM2, FLD_VAL(14, 23, 16) | FLD_VAL(800, 10, 0)); + + /* Set above HTIM1, HTIM2, VTIM1, and VTIM2 at next VSYNC. */ + tc35876x_regw(i2c, VFUEN, BIT(0)); + + /* Soft reset LCD controller. */ + tc35876x_regw(i2c, SYSRST, BIT(2)); + + /* LVDS-TX input muxing */ + tc35876x_regw(i2c, LVMX0003, + INPUT_MUX(INPUT_R5, INPUT_R4, INPUT_R3, INPUT_R2)); + tc35876x_regw(i2c, LVMX0407, + INPUT_MUX(INPUT_G2, INPUT_R7, INPUT_R1, INPUT_R6)); + tc35876x_regw(i2c, LVMX0811, + INPUT_MUX(INPUT_G1, INPUT_G0, INPUT_G4, INPUT_G3)); + tc35876x_regw(i2c, LVMX1215, + INPUT_MUX(INPUT_B2, INPUT_G7, INPUT_G6, INPUT_G5)); + tc35876x_regw(i2c, LVMX1619, + INPUT_MUX(INPUT_B4, INPUT_B3, INPUT_B1, INPUT_B0)); + tc35876x_regw(i2c, LVMX2023, + INPUT_MUX(LOGIC_0, INPUT_B7, INPUT_B6, INPUT_B5)); + tc35876x_regw(i2c, LVMX2427, + INPUT_MUX(INPUT_R0, INPUT_DE, INPUT_VSYNC, INPUT_HSYNC)); + + /* Enable LVDS transmitter. */ + tc35876x_regw(i2c, LVCFG, BIT(0)); + + /* Clear notifications. Don't write reserved bits. Was write 0xffffffff + * to 0x0288, must be in error?! */ + tc35876x_regw(i2c, DSI_INTCLR, FLD_MASK(31, 30) | FLD_MASK(22, 0)); +} + +#define GPIOPWMCTRL 0x38F +#define PWM0CLKDIV0 0x62 /* low byte */ +#define PWM0CLKDIV1 0x61 /* high byte */ + +#define SYSTEMCLK 19200000UL /* 19.2 MHz */ +#define PWM_FREQUENCY 9600 /* Hz */ + +/* f = baseclk / (clkdiv + 1) => clkdiv = (baseclk - f) / f */ +static inline u16 calc_clkdiv(unsigned long baseclk, unsigned int f) +{ + return (baseclk - f) / f; +} + +static void tc35876x_brightness_init(struct drm_device *dev) +{ + int ret; + u8 pwmctrl; + u16 clkdiv; + + /* Make sure the PWM reference is the 19.2 MHz system clock. Read first + * instead of setting directly to catch potential conflicts between PWM + * users. */ + ret = intel_scu_ipc_ioread8(GPIOPWMCTRL, &pwmctrl); + if (ret || pwmctrl != 0x01) { + if (ret) + dev_err(&dev->pdev->dev, "GPIOPWMCTRL read failed\n"); + else + dev_warn(&dev->pdev->dev, "GPIOPWMCTRL was not set to system clock (pwmctrl = 0x%02x)\n", pwmctrl); + + ret = intel_scu_ipc_iowrite8(GPIOPWMCTRL, 0x01); + if (ret) + dev_err(&dev->pdev->dev, "GPIOPWMCTRL set failed\n"); + } + + clkdiv = calc_clkdiv(SYSTEMCLK, PWM_FREQUENCY); + + ret = intel_scu_ipc_iowrite8(PWM0CLKDIV1, (clkdiv >> 8) & 0xff); + if (!ret) + ret = intel_scu_ipc_iowrite8(PWM0CLKDIV0, clkdiv & 0xff); + + if (ret) + dev_err(&dev->pdev->dev, "PWM0CLKDIV set failed\n"); + else + dev_dbg(&dev->pdev->dev, "PWM0CLKDIV set to 0x%04x (%d Hz)\n", + clkdiv, PWM_FREQUENCY); +} + +#define PWM0DUTYCYCLE 0x67 + +void tc35876x_brightness_control(struct drm_device *dev, int level) +{ + int ret; + u8 duty_val; + u8 panel_duty_val; + + level = clamp(level, 0, MDFLD_DSI_BRIGHTNESS_MAX_LEVEL); + + /* PWM duty cycle 0x00...0x63 corresponds to 0...99% */ + duty_val = level * 0x63 / MDFLD_DSI_BRIGHTNESS_MAX_LEVEL; + + /* I won't pretend to understand this formula. The panel spec is quite + * bad engrish. + */ + panel_duty_val = (2 * level - 100) * 0xA9 / + MDFLD_DSI_BRIGHTNESS_MAX_LEVEL + 0x56; + + ret = intel_scu_ipc_iowrite8(PWM0DUTYCYCLE, duty_val); + if (ret) + dev_err(&tc35876x_client->dev, "%s: ipc write fail\n", + __func__); + + if (cmi_lcd_i2c_client) { + ret = i2c_smbus_write_byte_data(cmi_lcd_i2c_client, + PANEL_PWM_MAX, panel_duty_val); + if (ret < 0) + dev_err(&cmi_lcd_i2c_client->dev, "%s: i2c write failed\n", + __func__); + } +} + +void tc35876x_toshiba_bridge_panel_off(struct drm_device *dev) +{ + struct tc35876x_platform_data *pdata; + + if (WARN(!tc35876x_client, "%s called before probe", __func__)) + return; + + dev_dbg(&tc35876x_client->dev, "%s\n", __func__); + + pdata = dev_get_platdata(&tc35876x_client->dev); + + if (pdata->gpio_panel_bl_en != -1) + gpio_set_value_cansleep(pdata->gpio_panel_bl_en, 0); + + if (pdata->gpio_panel_vadd != -1) + gpio_set_value_cansleep(pdata->gpio_panel_vadd, 0); +} + +void tc35876x_toshiba_bridge_panel_on(struct drm_device *dev) +{ + struct tc35876x_platform_data *pdata; + struct drm_psb_private *dev_priv = dev->dev_private; + + if (WARN(!tc35876x_client, "%s called before probe", __func__)) + return; + + dev_dbg(&tc35876x_client->dev, "%s\n", __func__); + + pdata = dev_get_platdata(&tc35876x_client->dev); + + if (pdata->gpio_panel_vadd != -1) { + gpio_set_value_cansleep(pdata->gpio_panel_vadd, 1); + msleep(260); + } + + if (cmi_lcd_i2c_client) { + int ret; + dev_dbg(&cmi_lcd_i2c_client->dev, "setting TCON\n"); + /* Bit 4 is average_saving. Setting it to 1, the brightness is + * referenced to the average of the frame content. 0 means + * reference to the maximum of frame contents. Bits 3:0 are + * allow_distort. When set to a nonzero value, all color values + * between 255-allow_distort*2 and 255 are mapped to the + * 255-allow_distort*2 value. + */ + ret = i2c_smbus_write_byte_data(cmi_lcd_i2c_client, + PANEL_ALLOW_DISTORT, 0x10); + if (ret < 0) + dev_err(&cmi_lcd_i2c_client->dev, + "i2c write failed (%d)\n", ret); + ret = i2c_smbus_write_byte_data(cmi_lcd_i2c_client, + PANEL_BYPASS_PWMI, 0); + if (ret < 0) + dev_err(&cmi_lcd_i2c_client->dev, + "i2c write failed (%d)\n", ret); + /* Set minimum brightness value - this is tunable */ + ret = i2c_smbus_write_byte_data(cmi_lcd_i2c_client, + PANEL_PWM_MIN, 0x35); + if (ret < 0) + dev_err(&cmi_lcd_i2c_client->dev, + "i2c write failed (%d)\n", ret); + } + + if (pdata->gpio_panel_bl_en != -1) + gpio_set_value_cansleep(pdata->gpio_panel_bl_en, 1); + + tc35876x_brightness_control(dev, dev_priv->brightness_adjusted); +} + +static struct drm_display_mode *tc35876x_get_config_mode(struct drm_device *dev) +{ + struct drm_display_mode *mode; + + dev_dbg(&dev->pdev->dev, "%s\n", __func__); + + mode = kzalloc(sizeof(*mode), GFP_KERNEL); + if (!mode) + return NULL; + + /* FIXME: do this properly. */ + mode->hdisplay = 1280; + mode->vdisplay = 800; + mode->hsync_start = 1360; + mode->hsync_end = 1400; + mode->htotal = 1440; + mode->vsync_start = 814; + mode->vsync_end = 824; + mode->vtotal = 838; + mode->clock = 33324 << 1; + + dev_info(&dev->pdev->dev, "hdisplay(w) = %d\n", mode->hdisplay); + dev_info(&dev->pdev->dev, "vdisplay(h) = %d\n", mode->vdisplay); + dev_info(&dev->pdev->dev, "HSS = %d\n", mode->hsync_start); + dev_info(&dev->pdev->dev, "HSE = %d\n", mode->hsync_end); + dev_info(&dev->pdev->dev, "htotal = %d\n", mode->htotal); + dev_info(&dev->pdev->dev, "VSS = %d\n", mode->vsync_start); + dev_info(&dev->pdev->dev, "VSE = %d\n", mode->vsync_end); + dev_info(&dev->pdev->dev, "vtotal = %d\n", mode->vtotal); + dev_info(&dev->pdev->dev, "clock = %d\n", mode->clock); + + drm_mode_set_name(mode); + drm_mode_set_crtcinfo(mode, 0); + + mode->type |= DRM_MODE_TYPE_PREFERRED; + + return mode; +} + +/* DV1 Active area 216.96 x 135.6 mm */ +#define DV1_PANEL_WIDTH 217 +#define DV1_PANEL_HEIGHT 136 + +static int tc35876x_get_panel_info(struct drm_device *dev, int pipe, + struct panel_info *pi) +{ + if (!dev || !pi) + return -EINVAL; + + pi->width_mm = DV1_PANEL_WIDTH; + pi->height_mm = DV1_PANEL_HEIGHT; + + return 0; +} + +static int tc35876x_bridge_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct tc35876x_platform_data *pdata; + + dev_info(&client->dev, "%s\n", __func__); + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(&client->dev, "%s: i2c_check_functionality() failed\n", + __func__); + return -ENODEV; + } + + pdata = dev_get_platdata(&client->dev); + if (!pdata) { + dev_err(&client->dev, "%s: no platform data\n", __func__); + return -ENODEV; + } + + if (pdata->gpio_bridge_reset != -1) { + gpio_request(pdata->gpio_bridge_reset, "tc35876x bridge reset"); + gpio_direction_output(pdata->gpio_bridge_reset, 0); + } + + if (pdata->gpio_panel_bl_en != -1) { + gpio_request(pdata->gpio_panel_bl_en, "tc35876x panel bl en"); + gpio_direction_output(pdata->gpio_panel_bl_en, 0); + } + + if (pdata->gpio_panel_vadd != -1) { + gpio_request(pdata->gpio_panel_vadd, "tc35876x panel vadd"); + gpio_direction_output(pdata->gpio_panel_vadd, 0); + } + + tc35876x_client = client; + + return 0; +} + +static int tc35876x_bridge_remove(struct i2c_client *client) +{ + struct tc35876x_platform_data *pdata = dev_get_platdata(&client->dev); + + dev_dbg(&client->dev, "%s\n", __func__); + + if (pdata->gpio_bridge_reset != -1) + gpio_free(pdata->gpio_bridge_reset); + + if (pdata->gpio_panel_bl_en != -1) + gpio_free(pdata->gpio_panel_bl_en); + + if (pdata->gpio_panel_vadd != -1) + gpio_free(pdata->gpio_panel_vadd); + + tc35876x_client = NULL; + + return 0; +} + +static const struct i2c_device_id tc35876x_bridge_id[] = { + { "i2c_disp_brig", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tc35876x_bridge_id); + +static struct i2c_driver tc35876x_bridge_i2c_driver = { + .driver = { + .name = "i2c_disp_brig", + }, + .id_table = tc35876x_bridge_id, + .probe = tc35876x_bridge_probe, + .remove = __devexit_p(tc35876x_bridge_remove), +}; + +/* LCD panel I2C */ +static int cmi_lcd_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + dev_info(&client->dev, "%s\n", __func__); + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(&client->dev, "%s: i2c_check_functionality() failed\n", + __func__); + return -ENODEV; + } + + cmi_lcd_i2c_client = client; + + return 0; +} + +static int cmi_lcd_i2c_remove(struct i2c_client *client) +{ + dev_dbg(&client->dev, "%s\n", __func__); + + cmi_lcd_i2c_client = NULL; + + return 0; +} + +static const struct i2c_device_id cmi_lcd_i2c_id[] = { + { "cmi-lcd", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, cmi_lcd_i2c_id); + +static struct i2c_driver cmi_lcd_i2c_driver = { + .driver = { + .name = "cmi-lcd", + }, + .id_table = cmi_lcd_i2c_id, + .probe = cmi_lcd_i2c_probe, + .remove = __devexit_p(cmi_lcd_i2c_remove), +}; + +/* HACK to create I2C device while it's not created by platform code */ +#define CMI_LCD_I2C_ADAPTER 2 +#define CMI_LCD_I2C_ADDR 0x60 + +static int cmi_lcd_hack_create_device(void) +{ + struct i2c_adapter *adapter; + struct i2c_client *client; + struct i2c_board_info info = { + .type = "cmi-lcd", + .addr = CMI_LCD_I2C_ADDR, + }; + + pr_debug("%s\n", __func__); + + adapter = i2c_get_adapter(CMI_LCD_I2C_ADAPTER); + if (!adapter) { + pr_err("%s: i2c_get_adapter(%d) failed\n", __func__, + CMI_LCD_I2C_ADAPTER); + return -EINVAL; + } + + client = i2c_new_device(adapter, &info); + if (!client) { + pr_err("%s: i2c_new_device() failed\n", __func__); + i2c_put_adapter(adapter); + return -EINVAL; + } + + return 0; +} + +static const struct drm_encoder_helper_funcs tc35876x_encoder_helper_funcs = { + .dpms = mdfld_dsi_dpi_dpms, + .mode_fixup = mdfld_dsi_dpi_mode_fixup, + .prepare = mdfld_dsi_dpi_prepare, + .mode_set = mdfld_dsi_dpi_mode_set, + .commit = mdfld_dsi_dpi_commit, +}; + +static const struct drm_encoder_funcs tc35876x_encoder_funcs = { + .destroy = drm_encoder_cleanup, +}; + +const struct panel_funcs mdfld_tc35876x_funcs = { + .encoder_funcs = &tc35876x_encoder_funcs, + .encoder_helper_funcs = &tc35876x_encoder_helper_funcs, + .get_config_mode = tc35876x_get_config_mode, + .get_panel_info = tc35876x_get_panel_info, +}; + +void tc35876x_init(struct drm_device *dev) +{ + int r; + + dev_dbg(&dev->pdev->dev, "%s\n", __func__); + + cmi_lcd_hack_create_device(); + + r = i2c_add_driver(&cmi_lcd_i2c_driver); + if (r < 0) + dev_err(&dev->pdev->dev, + "%s: i2c_add_driver() for %s failed (%d)\n", + __func__, cmi_lcd_i2c_driver.driver.name, r); + + r = i2c_add_driver(&tc35876x_bridge_i2c_driver); + if (r < 0) + dev_err(&dev->pdev->dev, + "%s: i2c_add_driver() for %s failed (%d)\n", + __func__, tc35876x_bridge_i2c_driver.driver.name, r); + + tc35876x_brightness_init(dev); +} + +void tc35876x_exit(void) +{ + pr_debug("%s\n", __func__); + + i2c_del_driver(&tc35876x_bridge_i2c_driver); + + if (cmi_lcd_i2c_client) + i2c_del_driver(&cmi_lcd_i2c_driver); +} |