1 files changed, 89 insertions, 39 deletions

diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c
index a6ac0b4..c275bf0 100644
--- a/drivers/gpu/drm/i915/intel_sdvo.c
+++ b/drivers/gpu/drm/i915/intel_sdvo.c
@@ -509,7 +509,7 @@ out:
 static bool intel_sdvo_read_response(struct intel_sdvo *intel_sdvo,
 				     void *response, int response_len)
 {
-	u8 retry = 5;
+	u8 retry = 15; /* 5 quick checks, followed by 10 long checks */
 	u8 status;
 	int i;
 
@@ -522,14 +522,27 @@ static bool intel_sdvo_read_response(struct intel_sdvo *intel_sdvo,
 	 * command to be complete.
 	 *
 	 * Check 5 times in case the hardware failed to read the docs.
+	 *
+	 * Also beware that the first response by many devices is to
+	 * reply PENDING and stall for time. TVs are notorious for
+	 * requiring longer than specified to complete their replies.
+	 * Originally (in the DDX long ago), the delay was only ever 15ms
+	 * with an additional delay of 30ms applied for TVs added later after
+	 * many experiments. To accommodate both sets of delays, we do a
+	 * sequence of slow checks if the device is falling behind and fails
+	 * to reply within 5*15µs.
 	 */
 	if (!intel_sdvo_read_byte(intel_sdvo,
 				  SDVO_I2C_CMD_STATUS,
 				  &status))
 		goto log_fail;
 
-	while (status == SDVO_CMD_STATUS_PENDING && retry--) {
-		udelay(15);
+	while (status == SDVO_CMD_STATUS_PENDING && --retry) {
+		if (retry < 10)
+			msleep(15);
+		else
+			udelay(15);
+
 		if (!intel_sdvo_read_byte(intel_sdvo,
 					  SDVO_I2C_CMD_STATUS,
 					  &status))
@@ -1228,6 +1241,30 @@ static void intel_disable_sdvo(struct intel_encoder *encoder)
 
 	temp = I915_READ(intel_sdvo->sdvo_reg);
 	if ((temp & SDVO_ENABLE) != 0) {
+		/* HW workaround for IBX, we need to move the port to
+		 * transcoder A before disabling it. */
+		if (HAS_PCH_IBX(encoder->base.dev)) {
+			struct drm_crtc *crtc = encoder->base.crtc;
+			int pipe = crtc ? to_intel_crtc(crtc)->pipe : -1;
+
+			if (temp & SDVO_PIPE_B_SELECT) {
+				temp &= ~SDVO_PIPE_B_SELECT;
+				I915_WRITE(intel_sdvo->sdvo_reg, temp);
+				POSTING_READ(intel_sdvo->sdvo_reg);
+
+				/* Again we need to write this twice. */
+				I915_WRITE(intel_sdvo->sdvo_reg, temp);
+				POSTING_READ(intel_sdvo->sdvo_reg);
+
+				/* Transcoder selection bits only update
+				 * effectively on vblank. */
+				if (crtc)
+					intel_wait_for_vblank(encoder->base.dev, pipe);
+				else
+					msleep(50);
+			}
+		}
+
 		intel_sdvo_write_sdvox(intel_sdvo, temp & ~SDVO_ENABLE);
 	}
 }
@@ -1244,8 +1281,20 @@ static void intel_enable_sdvo(struct intel_encoder *encoder)
 	u8 status;
 
 	temp = I915_READ(intel_sdvo->sdvo_reg);
-	if ((temp & SDVO_ENABLE) == 0)
+	if ((temp & SDVO_ENABLE) == 0) {
+		/* HW workaround for IBX, we need to move the port
+		 * to transcoder A before disabling it. */
+		if (HAS_PCH_IBX(dev)) {
+			struct drm_crtc *crtc = encoder->base.crtc;
+			int pipe = crtc ? to_intel_crtc(crtc)->pipe : -1;
+
+			/* Restore the transcoder select bit. */
+			if (pipe == PIPE_B)
+				temp |= SDVO_PIPE_B_SELECT;
+		}
+
 		intel_sdvo_write_sdvox(intel_sdvo, temp | SDVO_ENABLE);
+	}
 	for (i = 0; i < 2; i++)
 		intel_wait_for_vblank(dev, intel_crtc->pipe);
 
@@ -1499,15 +1548,9 @@ intel_sdvo_detect(struct drm_connector *connector, bool force)
 	struct intel_sdvo_connector *intel_sdvo_connector = to_intel_sdvo_connector(connector);
 	enum drm_connector_status ret;
 
-	if (!intel_sdvo_write_cmd(intel_sdvo,
-				  SDVO_CMD_GET_ATTACHED_DISPLAYS, NULL, 0))
-		return connector_status_unknown;
-
-	/* add 30ms delay when the output type might be TV */
-	if (intel_sdvo->caps.output_flags & SDVO_TV_MASK)
-		msleep(30);
-
-	if (!intel_sdvo_read_response(intel_sdvo, &response, 2))
+	if (!intel_sdvo_get_value(intel_sdvo,
+				  SDVO_CMD_GET_ATTACHED_DISPLAYS,
+				  &response, 2))
 		return connector_status_unknown;
 
 	DRM_DEBUG_KMS("SDVO response %d %d [%x]\n",
@@ -1796,7 +1839,7 @@ static void intel_sdvo_destroy(struct drm_connector *connector)
 	intel_sdvo_destroy_enhance_property(connector);
 	drm_sysfs_connector_remove(connector);
 	drm_connector_cleanup(connector);
-	kfree(connector);
+	kfree(intel_sdvo_connector);
 }
 
 static bool intel_sdvo_detect_hdmi_audio(struct drm_connector *connector)
@@ -1828,7 +1871,7 @@ intel_sdvo_set_property(struct drm_connector *connector,
 	uint8_t cmd;
 	int ret;
 
-	ret = drm_connector_property_set_value(connector, property, val);
+	ret = drm_object_property_set_value(&connector->base, property, val);
 	if (ret)
 		return ret;
 
@@ -1883,7 +1926,7 @@ intel_sdvo_set_property(struct drm_connector *connector,
 	} else if (IS_TV_OR_LVDS(intel_sdvo_connector)) {
 		temp_value = val;
 		if (intel_sdvo_connector->left == property) {
-			drm_connector_property_set_value(connector,
+			drm_object_property_set_value(&connector->base,
 							 intel_sdvo_connector->right, val);
 			if (intel_sdvo_connector->left_margin == temp_value)
 				return 0;
@@ -1895,7 +1938,7 @@ intel_sdvo_set_property(struct drm_connector *connector,
 			cmd = SDVO_CMD_SET_OVERSCAN_H;
 			goto set_value;
 		} else if (intel_sdvo_connector->right == property) {
-			drm_connector_property_set_value(connector,
+			drm_object_property_set_value(&connector->base,
 							 intel_sdvo_connector->left, val);
 			if (intel_sdvo_connector->right_margin == temp_value)
 				return 0;
@@ -1907,7 +1950,7 @@ intel_sdvo_set_property(struct drm_connector *connector,
 			cmd = SDVO_CMD_SET_OVERSCAN_H;
 			goto set_value;
 		} else if (intel_sdvo_connector->top == property) {
-			drm_connector_property_set_value(connector,
+			drm_object_property_set_value(&connector->base,
 							 intel_sdvo_connector->bottom, val);
 			if (intel_sdvo_connector->top_margin == temp_value)
 				return 0;
@@ -1919,7 +1962,7 @@ intel_sdvo_set_property(struct drm_connector *connector,
 			cmd = SDVO_CMD_SET_OVERSCAN_V;
 			goto set_value;
 		} else if (intel_sdvo_connector->bottom == property) {
-			drm_connector_property_set_value(connector,
+			drm_object_property_set_value(&connector->base,
 							 intel_sdvo_connector->top, val);
 			if (intel_sdvo_connector->bottom_margin == temp_value)
 				return 0;
@@ -2072,17 +2115,24 @@ intel_sdvo_select_i2c_bus(struct drm_i915_private *dev_priv,
 	else
 		mapping = &dev_priv->sdvo_mappings[1];
 
-	pin = GMBUS_PORT_DPB;
-	if (mapping->initialized)
+	if (mapping->initialized && intel_gmbus_is_port_valid(mapping->i2c_pin))
 		pin = mapping->i2c_pin;
+	else
+		pin = GMBUS_PORT_DPB;
 
-	if (intel_gmbus_is_port_valid(pin)) {
-		sdvo->i2c = intel_gmbus_get_adapter(dev_priv, pin);
-		intel_gmbus_set_speed(sdvo->i2c, GMBUS_RATE_1MHZ);
-		intel_gmbus_force_bit(sdvo->i2c, true);
-	} else {
-		sdvo->i2c = intel_gmbus_get_adapter(dev_priv, GMBUS_PORT_DPB);
-	}
+	sdvo->i2c = intel_gmbus_get_adapter(dev_priv, pin);
+
+	/* With gmbus we should be able to drive sdvo i2c at 2MHz, but somehow
+	 * our code totally fails once we start using gmbus. Hence fall back to
+	 * bit banging for now. */
+	intel_gmbus_force_bit(sdvo->i2c, true);
+}
+
+/* undo any changes intel_sdvo_select_i2c_bus() did to sdvo->i2c */
+static void
+intel_sdvo_unselect_i2c_bus(struct intel_sdvo *sdvo)
+{
+	intel_gmbus_force_bit(sdvo->i2c, false);
 }
 
 static bool
@@ -2427,7 +2477,7 @@ static bool intel_sdvo_tv_create_property(struct intel_sdvo *intel_sdvo,
 				i, tv_format_names[intel_sdvo_connector->tv_format_supported[i]]);
 
 	intel_sdvo->tv_format_index = intel_sdvo_connector->tv_format_supported[0];
-	drm_connector_attach_property(&intel_sdvo_connector->base.base,
+	drm_object_attach_property(&intel_sdvo_connector->base.base.base,
 				      intel_sdvo_connector->tv_format, 0);
 	return true;
 
@@ -2443,7 +2493,7 @@ static bool intel_sdvo_tv_create_property(struct intel_sdvo *intel_sdvo,
 		intel_sdvo_connector->name = \
 			drm_property_create_range(dev, 0, #name, 0, data_value[0]); \
 		if (!intel_sdvo_connector->name) return false; \
-		drm_connector_attach_property(connector, \
+		drm_object_attach_property(&connector->base, \
 					      intel_sdvo_connector->name, \
 					      intel_sdvo_connector->cur_##name); \
 		DRM_DEBUG_KMS(#name ": max %d, default %d, current %d\n", \
@@ -2480,7 +2530,7 @@ intel_sdvo_create_enhance_property_tv(struct intel_sdvo *intel_sdvo,
 		if (!intel_sdvo_connector->left)
 			return false;
 
-		drm_connector_attach_property(connector,
+		drm_object_attach_property(&connector->base,
 					      intel_sdvo_connector->left,
 					      intel_sdvo_connector->left_margin);
 
@@ -2489,7 +2539,7 @@ intel_sdvo_create_enhance_property_tv(struct intel_sdvo *intel_sdvo,
 		if (!intel_sdvo_connector->right)
 			return false;
 
-		drm_connector_attach_property(connector,
+		drm_object_attach_property(&connector->base,
 					      intel_sdvo_connector->right,
 					      intel_sdvo_connector->right_margin);
 		DRM_DEBUG_KMS("h_overscan: max %d, "
@@ -2517,7 +2567,7 @@ intel_sdvo_create_enhance_property_tv(struct intel_sdvo *intel_sdvo,
 		if (!intel_sdvo_connector->top)
 			return false;
 
-		drm_connector_attach_property(connector,
+		drm_object_attach_property(&connector->base,
 					      intel_sdvo_connector->top,
 					      intel_sdvo_connector->top_margin);
 
@@ -2527,7 +2577,7 @@ intel_sdvo_create_enhance_property_tv(struct intel_sdvo *intel_sdvo,
 		if (!intel_sdvo_connector->bottom)
 			return false;
 
-		drm_connector_attach_property(connector,
+		drm_object_attach_property(&connector->base,
 					      intel_sdvo_connector->bottom,
 					      intel_sdvo_connector->bottom_margin);
 		DRM_DEBUG_KMS("v_overscan: max %d, "
@@ -2559,7 +2609,7 @@ intel_sdvo_create_enhance_property_tv(struct intel_sdvo *intel_sdvo,
 		if (!intel_sdvo_connector->dot_crawl)
 			return false;
 
-		drm_connector_attach_property(connector,
+		drm_object_attach_property(&connector->base,
 					      intel_sdvo_connector->dot_crawl,
 					      intel_sdvo_connector->cur_dot_crawl);
 		DRM_DEBUG_KMS("dot crawl: current %d\n", response);
@@ -2663,10 +2713,8 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob)
 	intel_sdvo->is_sdvob = is_sdvob;
 	intel_sdvo->slave_addr = intel_sdvo_get_slave_addr(dev, intel_sdvo) >> 1;
 	intel_sdvo_select_i2c_bus(dev_priv, intel_sdvo, sdvo_reg);
-	if (!intel_sdvo_init_ddc_proxy(intel_sdvo, dev)) {
-		kfree(intel_sdvo);
-		return false;
-	}
+	if (!intel_sdvo_init_ddc_proxy(intel_sdvo, dev))
+		goto err_i2c_bus;
 
 	/* encoder type will be decided later */
 	intel_encoder = &intel_sdvo->base;
@@ -2765,6 +2813,8 @@ err_output:
 err:
 	drm_encoder_cleanup(&intel_encoder->base);
 	i2c_del_adapter(&intel_sdvo->ddc);
+err_i2c_bus:
+	intel_sdvo_unselect_i2c_bus(intel_sdvo);
 	kfree(intel_sdvo);
 
 	return false;