diff options
Diffstat (limited to 'drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c')
| -rw-r--r-- | drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c | 271 |
1 files changed, 207 insertions, 64 deletions
diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c index b7b32c4..85f2fb4 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c @@ -1,4 +1,5 @@ /* + * Copyright (c) 2014 The Linux Foundation. All rights reserved. * Copyright (C) 2013 Red Hat * Author: Rob Clark <robdclark@gmail.com> * @@ -22,14 +23,21 @@ #include "drm_crtc_helper.h" #include "drm_flip_work.h" +#define SSPP_MAX (SSPP_RGB3 + 1) /* TODO: Add SSPP_MAX in mdp5.xml.h */ + struct mdp5_crtc { struct drm_crtc base; char name[8]; int id; bool enabled; - /* which mixer/encoder we route output to: */ - int mixer; + /* layer mixer used for this CRTC (+ its lock): */ +#define GET_LM_ID(crtc_id) ((crtc_id == 3) ? 5 : crtc_id) + int lm; + spinlock_t lm_lock; /* protect REG_MDP5_LM_* registers */ + + /* CTL used for this CRTC: */ + void *ctl; /* if there is a pending flip, these will be non-null: */ struct drm_pending_vblank_event *event; @@ -71,25 +79,38 @@ static void request_pending(struct drm_crtc *crtc, uint32_t pending) mdp_irq_register(&get_kms(crtc)->base, &mdp5_crtc->vblank); } -static void crtc_flush(struct drm_crtc *crtc) +#define mdp5_lm_get_flush(lm) mdp_ctl_flush_mask_lm(lm) + +static void crtc_flush(struct drm_crtc *crtc, u32 flush_mask) +{ + struct mdp5_crtc *mdp5_crtc = to_mdp5_crtc(crtc); + + DBG("%s: flush=%08x", mdp5_crtc->name, flush_mask); + mdp5_ctl_commit(mdp5_crtc->ctl, flush_mask); +} + +/* + * flush updates, to make sure hw is updated to new scanout fb, + * so that we can safely queue unref to current fb (ie. next + * vblank we know hw is done w/ previous scanout_fb). + */ +static void crtc_flush_all(struct drm_crtc *crtc) { struct mdp5_crtc *mdp5_crtc = to_mdp5_crtc(crtc); - struct mdp5_kms *mdp5_kms = get_kms(crtc); - int id = mdp5_crtc->id; struct drm_plane *plane; - uint32_t flush = 0; + uint32_t flush_mask = 0; + + /* we could have already released CTL in the disable path: */ + if (!mdp5_crtc->ctl) + return; for_each_plane_on_crtc(crtc, plane) { - enum mdp5_pipe pipe = mdp5_plane_pipe(plane); - flush |= pipe2flush(pipe); + flush_mask |= mdp5_plane_get_flush(plane); } + flush_mask |= mdp5_ctl_get_flush(mdp5_crtc->ctl); + flush_mask |= mdp5_lm_get_flush(mdp5_crtc->lm); - flush |= mixer2flush(mdp5_crtc->id); - flush |= MDP5_CTL_FLUSH_CTL; - - DBG("%s: flush=%08x", mdp5_crtc->name, flush); - - mdp5_write(mdp5_kms, REG_MDP5_CTL_FLUSH(id), flush); + crtc_flush(crtc, flush_mask); } static void update_fb(struct drm_crtc *crtc, struct drm_framebuffer *new_fb) @@ -117,12 +138,6 @@ static void update_scanout(struct drm_crtc *crtc, struct drm_framebuffer *fb) { struct mdp5_crtc *mdp5_crtc = to_mdp5_crtc(crtc); - /* flush updates, to make sure hw is updated to new scanout fb, - * so that we can safely queue unref to current fb (ie. next - * vblank we know hw is done w/ previous scanout_fb). - */ - crtc_flush(crtc); - if (mdp5_crtc->scanout_fb) drm_flip_work_queue(&mdp5_crtc->unref_fb_work, mdp5_crtc->scanout_fb); @@ -173,6 +188,7 @@ static void pageflip_cb(struct msm_fence_cb *cb) drm_framebuffer_reference(fb); mdp5_plane_set_scanout(crtc->primary, fb); update_scanout(crtc, fb); + crtc_flush_all(crtc); } static void unref_fb_worker(struct drm_flip_work *work, void *val) @@ -223,41 +239,68 @@ static bool mdp5_crtc_mode_fixup(struct drm_crtc *crtc, return true; } +/* + * blend_setup() - blend all the planes of a CRTC + * + * When border is enabled, the border color will ALWAYS be the base layer. + * Therefore, the first plane (private RGB pipe) will start at STAGE0. + * If disabled, the first plane starts at STAGE_BASE. + * + * Note: + * Border is not enabled here because the private plane is exactly + * the CRTC resolution. + */ static void blend_setup(struct drm_crtc *crtc) { struct mdp5_crtc *mdp5_crtc = to_mdp5_crtc(crtc); struct mdp5_kms *mdp5_kms = get_kms(crtc); - int id = mdp5_crtc->id; + struct drm_plane *plane; + const struct mdp5_cfg_hw *hw_cfg; + uint32_t lm = mdp5_crtc->lm, blend_cfg = 0; + enum mdp_mixer_stage_id stage; + unsigned long flags; +#define blender(stage) ((stage) - STAGE_BASE) - /* - * Hard-coded setup for now until I figure out how the - * layer-mixer works - */ + hw_cfg = mdp5_cfg_get_hw_config(mdp5_kms->cfg_priv); - /* LM[id]: */ - mdp5_write(mdp5_kms, REG_MDP5_LM_BLEND_COLOR_OUT(id), - MDP5_LM_BLEND_COLOR_OUT_STAGE0_FG_ALPHA); - mdp5_write(mdp5_kms, REG_MDP5_LM_BLEND_OP_MODE(id, 0), - MDP5_LM_BLEND_OP_MODE_FG_ALPHA(FG_CONST) | - MDP5_LM_BLEND_OP_MODE_BG_ALPHA(FG_PIXEL) | - MDP5_LM_BLEND_OP_MODE_BG_INV_ALPHA); - mdp5_write(mdp5_kms, REG_MDP5_LM_BLEND_FG_ALPHA(id, 0), 0xff); - mdp5_write(mdp5_kms, REG_MDP5_LM_BLEND_BG_ALPHA(id, 0), 0x00); - - /* NOTE: seems that LM[n] and CTL[m], we do not need n==m.. but - * we want to be setting CTL[m].LAYER[n]. Not sure what the - * point of having CTL[m].LAYER[o] (for o!=n).. maybe that is - * used when chaining up mixers for high resolution displays? - */ + spin_lock_irqsave(&mdp5_crtc->lm_lock, flags); + + /* ctl could be released already when we are shutting down: */ + if (!mdp5_crtc->ctl) + goto out; + + for_each_plane_on_crtc(crtc, plane) { + struct mdp5_overlay_info *overlay; + + overlay = mdp5_plane_get_overlay_info(plane); + stage = overlay->zorder; - /* CTL[id]: */ - mdp5_write(mdp5_kms, REG_MDP5_CTL_LAYER_REG(id, 0), - MDP5_CTL_LAYER_REG_RGB0(STAGE0) | - MDP5_CTL_LAYER_REG_BORDER_COLOR); - mdp5_write(mdp5_kms, REG_MDP5_CTL_LAYER_REG(id, 1), 0); - mdp5_write(mdp5_kms, REG_MDP5_CTL_LAYER_REG(id, 2), 0); - mdp5_write(mdp5_kms, REG_MDP5_CTL_LAYER_REG(id, 3), 0); - mdp5_write(mdp5_kms, REG_MDP5_CTL_LAYER_REG(id, 4), 0); + /* + * Note: This cannot happen with current implementation but + * we need to check this condition once z property is added + */ + BUG_ON(stage > hw_cfg->lm.nb_stages); + + /* LM */ + mdp5_write(mdp5_kms, + REG_MDP5_LM_BLEND_OP_MODE(lm, blender(stage)), + MDP5_LM_BLEND_OP_MODE_FG_ALPHA(FG_CONST) | + MDP5_LM_BLEND_OP_MODE_BG_ALPHA(BG_CONST)); + mdp5_write(mdp5_kms, REG_MDP5_LM_BLEND_FG_ALPHA(lm, + blender(stage)), 0xff); + mdp5_write(mdp5_kms, REG_MDP5_LM_BLEND_BG_ALPHA(lm, + blender(stage)), 0x00); + /* CTL */ + blend_cfg |= mdp_ctl_blend_mask(mdp5_plane_pipe(plane), stage); + DBG("%s: blending pipe %s on stage=%d", mdp5_crtc->name, + pipe2name(mdp5_plane_pipe(plane)), stage); + } + + DBG("%s: lm%d: blend config = 0x%08x", mdp5_crtc->name, lm, blend_cfg); + mdp5_ctl_blend(mdp5_crtc->ctl, lm, blend_cfg); + +out: + spin_unlock_irqrestore(&mdp5_crtc->lm_lock, flags); } static int mdp5_crtc_mode_set(struct drm_crtc *crtc, @@ -268,6 +311,7 @@ static int mdp5_crtc_mode_set(struct drm_crtc *crtc, { struct mdp5_crtc *mdp5_crtc = to_mdp5_crtc(crtc); struct mdp5_kms *mdp5_kms = get_kms(crtc); + unsigned long flags; int ret; mode = adjusted_mode; @@ -281,6 +325,13 @@ static int mdp5_crtc_mode_set(struct drm_crtc *crtc, mode->vsync_end, mode->vtotal, mode->type, mode->flags); + /* request a free CTL, if none is already allocated for this CRTC */ + if (!mdp5_crtc->ctl) { + mdp5_crtc->ctl = mdp5_ctl_request(mdp5_kms->ctl_priv, crtc); + if (!mdp5_crtc->ctl) + return -EBUSY; + } + /* grab extra ref for update_scanout() */ drm_framebuffer_reference(crtc->primary->fb); @@ -295,12 +346,15 @@ static int mdp5_crtc_mode_set(struct drm_crtc *crtc, return ret; } - mdp5_write(mdp5_kms, REG_MDP5_LM_OUT_SIZE(mdp5_crtc->id), + spin_lock_irqsave(&mdp5_crtc->lm_lock, flags); + mdp5_write(mdp5_kms, REG_MDP5_LM_OUT_SIZE(mdp5_crtc->lm), MDP5_LM_OUT_SIZE_WIDTH(mode->hdisplay) | MDP5_LM_OUT_SIZE_HEIGHT(mode->vdisplay)); + spin_unlock_irqrestore(&mdp5_crtc->lm_lock, flags); update_fb(crtc, crtc->primary->fb); update_scanout(crtc, crtc->primary->fb); + /* crtc_flush_all(crtc) will be called in _commit callback */ return 0; } @@ -317,7 +371,7 @@ static void mdp5_crtc_prepare(struct drm_crtc *crtc) static void mdp5_crtc_commit(struct drm_crtc *crtc) { mdp5_crtc_dpms(crtc, DRM_MODE_DPMS_ON); - crtc_flush(crtc); + crtc_flush_all(crtc); /* drop the ref to mdp clk's that we got in prepare: */ mdp5_disable(get_kms(crtc)); } @@ -343,6 +397,7 @@ static int mdp5_crtc_mode_set_base(struct drm_crtc *crtc, int x, int y, update_fb(crtc, crtc->primary->fb); update_scanout(crtc, crtc->primary->fb); + crtc_flush_all(crtc); return 0; } @@ -351,6 +406,19 @@ static void mdp5_crtc_load_lut(struct drm_crtc *crtc) { } +static void mdp5_crtc_disable(struct drm_crtc *crtc) +{ + struct mdp5_crtc *mdp5_crtc = to_mdp5_crtc(crtc); + + DBG("%s", mdp5_crtc->name); + + if (mdp5_crtc->ctl) { + mdp5_ctl_release(mdp5_crtc->ctl); + mdp5_crtc->ctl = NULL; + } +} + + static int mdp5_crtc_page_flip(struct drm_crtc *crtc, struct drm_framebuffer *new_fb, struct drm_pending_vblank_event *event, @@ -399,6 +467,7 @@ static const struct drm_crtc_helper_funcs mdp5_crtc_helper_funcs = { .commit = mdp5_crtc_commit, .mode_set_base = mdp5_crtc_mode_set_base, .load_lut = mdp5_crtc_load_lut, + .disable = mdp5_crtc_disable, }; static void mdp5_crtc_vblank_irq(struct mdp_irq *irq, uint32_t irqstatus) @@ -421,9 +490,8 @@ static void mdp5_crtc_vblank_irq(struct mdp_irq *irq, uint32_t irqstatus) static void mdp5_crtc_err_irq(struct mdp_irq *irq, uint32_t irqstatus) { struct mdp5_crtc *mdp5_crtc = container_of(irq, struct mdp5_crtc, err); - struct drm_crtc *crtc = &mdp5_crtc->base; + DBG("%s: error: %08x", mdp5_crtc->name, irqstatus); - crtc_flush(crtc); } uint32_t mdp5_crtc_vblank(struct drm_crtc *crtc) @@ -444,10 +512,9 @@ void mdp5_crtc_set_intf(struct drm_crtc *crtc, int intf, { struct mdp5_crtc *mdp5_crtc = to_mdp5_crtc(crtc); struct mdp5_kms *mdp5_kms = get_kms(crtc); - static const enum mdp5_intfnum intfnum[] = { - INTF0, INTF1, INTF2, INTF3, - }; + uint32_t flush_mask = 0; uint32_t intf_sel; + unsigned long flags; /* now that we know what irq's we want: */ mdp5_crtc->err.irqmask = intf2err(intf); @@ -457,6 +524,7 @@ void mdp5_crtc_set_intf(struct drm_crtc *crtc, int intf, if (!mdp5_kms) return; + spin_lock_irqsave(&mdp5_kms->resource_lock, flags); intf_sel = mdp5_read(mdp5_kms, REG_MDP5_DISP_INTF_SEL); switch (intf) { @@ -481,16 +549,24 @@ void mdp5_crtc_set_intf(struct drm_crtc *crtc, int intf, break; } - blend_setup(crtc); + mdp5_write(mdp5_kms, REG_MDP5_DISP_INTF_SEL, intf_sel); + spin_unlock_irqrestore(&mdp5_kms->resource_lock, flags); DBG("%s: intf_sel=%08x", mdp5_crtc->name, intf_sel); + mdp5_ctl_set_intf(mdp5_crtc->ctl, intf); + flush_mask |= mdp5_ctl_get_flush(mdp5_crtc->ctl); + flush_mask |= mdp5_lm_get_flush(mdp5_crtc->lm); - mdp5_write(mdp5_kms, REG_MDP5_DISP_INTF_SEL, intf_sel); - mdp5_write(mdp5_kms, REG_MDP5_CTL_OP(mdp5_crtc->id), - MDP5_CTL_OP_MODE(MODE_NONE) | - MDP5_CTL_OP_INTF_NUM(intfnum[intf])); + crtc_flush(crtc, flush_mask); +} - crtc_flush(crtc); +static int count_planes(struct drm_crtc *crtc) +{ + struct drm_plane *plane; + int cnt = 0; + for_each_plane_on_crtc(crtc, plane) + cnt++; + return cnt; } static void set_attach(struct drm_crtc *crtc, enum mdp5_pipe pipe_id, @@ -498,14 +574,68 @@ static void set_attach(struct drm_crtc *crtc, enum mdp5_pipe pipe_id, { struct mdp5_crtc *mdp5_crtc = to_mdp5_crtc(crtc); + if (plane) + plane->crtc = crtc; + + DBG("%s: %d planes attached", mdp5_crtc->name, count_planes(crtc)); + blend_setup(crtc); - if (mdp5_crtc->enabled && (plane != crtc->primary)) - crtc_flush(crtc); + if (mdp5_crtc->enabled) + crtc_flush_all(crtc); } -void mdp5_crtc_attach(struct drm_crtc *crtc, struct drm_plane *plane) +int mdp5_crtc_attach(struct drm_crtc *crtc, struct drm_plane *plane) { + struct mdp5_crtc *mdp5_crtc = to_mdp5_crtc(crtc); + struct mdp5_kms *mdp5_kms = get_kms(crtc); + struct device *dev = crtc->dev->dev; + const struct mdp5_cfg_hw *hw_cfg; + bool private_plane = (plane == crtc->primary); + struct mdp5_overlay_info overlay_info; + enum mdp_mixer_stage_id stage = STAGE_BASE; + int max_nb_planes; + + hw_cfg = mdp5_cfg_get_hw_config(mdp5_kms->cfg_priv); + max_nb_planes = hw_cfg->lm.nb_stages; + + if (count_planes(crtc) >= max_nb_planes) { + dev_err(dev, "%s: max # of planes (%d) reached\n", + mdp5_crtc->name, max_nb_planes); + return -EBUSY; + } + + /* + * Set default z-ordering depending on the type of plane + * private -> lower stage + * public -> topmost stage + * + * TODO: add a property to give userspace an API to change this... + * (will come in a subsequent patch) + */ + if (private_plane) { + stage = STAGE_BASE; + } else { + struct drm_plane *attached_plane; + for_each_plane_on_crtc(crtc, attached_plane) { + struct mdp5_overlay_info *overlay; + + if (!attached_plane) + continue; + overlay = mdp5_plane_get_overlay_info(attached_plane); + stage = max(stage, overlay->zorder); + } + stage++; + } + overlay_info.zorder = stage; + mdp5_plane_set_overlay_info(plane, &overlay_info); + + DBG("%s: %s plane %s set to stage %d by default", mdp5_crtc->name, + private_plane ? "private" : "public", + pipe2name(mdp5_plane_pipe(plane)), overlay_info.zorder); + set_attach(crtc, mdp5_plane_pipe(plane), plane); + + return 0; } void mdp5_crtc_detach(struct drm_crtc *crtc, struct drm_plane *plane) @@ -516,6 +646,16 @@ void mdp5_crtc_detach(struct drm_crtc *crtc, struct drm_plane *plane) set_attach(crtc, mdp5_plane_pipe(plane), NULL); } +int mdp5_crtc_get_lm(struct drm_crtc *crtc) +{ + struct mdp5_crtc *mdp5_crtc = to_mdp5_crtc(crtc); + + if (WARN_ON(!crtc)) + return -EINVAL; + + return mdp5_crtc->lm; +} + /* initialize crtc */ struct drm_crtc *mdp5_crtc_init(struct drm_device *dev, struct drm_plane *plane, int id) @@ -530,6 +670,9 @@ struct drm_crtc *mdp5_crtc_init(struct drm_device *dev, crtc = &mdp5_crtc->base; mdp5_crtc->id = id; + mdp5_crtc->lm = GET_LM_ID(id); + + spin_lock_init(&mdp5_crtc->lm_lock); mdp5_crtc->vblank.irq = mdp5_crtc_vblank_irq; mdp5_crtc->err.irq = mdp5_crtc_err_irq; |