diff options
Diffstat (limited to 'drivers/hwmon/Kconfig')
| -rw-r--r-- | drivers/hwmon/Kconfig | 600 |
1 files changed, 323 insertions, 277 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index ad4cdcb..b53d879 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -111,22 +111,6 @@ config SENSORS_AD7418 This driver can also be built as a module. If so, the module will be called ad7418. -config SENSORS_ADCXX - tristate "National Semiconductor ADCxxxSxxx" - depends on SPI_MASTER - help - If you say yes here you get support for the National Semiconductor - ADC<bb><c>S<sss> chip family, where - * bb is the resolution in number of bits (8, 10, 12) - * c is the number of channels (1, 2, 4, 8) - * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 - kSPS and 101 for 1 MSPS) - - Examples : ADC081S101, ADC124S501, ... - - This driver can also be built as a module. If so, the module - will be called adcxx. - config SENSORS_ADM1021 tristate "Analog Devices ADM1021 and compatibles" depends on I2C @@ -312,6 +296,31 @@ config SENSORS_FAM15H_POWER This driver can also be built as a module. If so, the module will be called fam15h_power. +config SENSORS_APPLESMC + tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" + depends on INPUT && X86 + select NEW_LEDS + select LEDS_CLASS + select INPUT_POLLDEV + default n + help + This driver provides support for the Apple System Management + Controller, which provides an accelerometer (Apple Sudden Motion + Sensor), light sensors, temperature sensors, keyboard backlight + control and fan control. + + Only Intel-based Apple's computers are supported (MacBook Pro, + MacBook, MacMini). + + Data from the different sensors, keyboard backlight control and fan + control are accessible via sysfs. + + This driver also provides an absolute input class device, allowing + the laptop to act as a pinball machine-esque joystick. + + Say Y here if you have an applicable laptop and want to experience + the awesome power of applesmc. + config SENSORS_ASB100 tristate "Asus ASB100 Bach" depends on X86 && I2C @@ -435,6 +444,12 @@ config SENSORS_F75375S This driver can also be built as a module. If so, the module will be called f75375s. +config SENSORS_MC13783_ADC + tristate "Freescale MC13783/MC13892 ADC" + depends on MFD_MC13XXX + help + Support for the A/D converter on MC13783 and MC13892 PMIC. + config SENSORS_FSCHMD tristate "Fujitsu Siemens Computers sensor chips" depends on X86 && I2C @@ -451,26 +466,6 @@ config SENSORS_FSCHMD This driver can also be built as a module. If so, the module will be called fschmd. -config SENSORS_G760A - tristate "GMT G760A" - depends on I2C - help - If you say yes here you get support for Global Mixed-mode - Technology Inc G760A fan speed PWM controller chips. - - This driver can also be built as a module. If so, the module - will be called g760a. - -config SENSORS_G762 - tristate "GMT G762 and G763" - depends on I2C - help - If you say yes here you get support for Global Mixed-mode - Technology Inc G762 and G763 fan speed PWM controller chips. - - This driver can also be built as a module. If so, the module - will be called g762. - config SENSORS_GL518SM tristate "Genesys Logic GL518SM" depends on I2C @@ -492,6 +487,26 @@ config SENSORS_GL520SM This driver can also be built as a module. If so, the module will be called gl520sm. +config SENSORS_G760A + tristate "GMT G760A" + depends on I2C + help + If you say yes here you get support for Global Mixed-mode + Technology Inc G760A fan speed PWM controller chips. + + This driver can also be built as a module. If so, the module + will be called g760a. + +config SENSORS_G762 + tristate "GMT G762 and G763" + depends on I2C + help + If you say yes here you get support for Global Mixed-mode + Technology Inc G762 and G763 fan speed PWM controller chips. + + This driver can also be built as a module. If so, the module + will be called g762. + config SENSORS_GPIO_FAN tristate "GPIO fan" depends on GPIOLIB @@ -511,24 +526,6 @@ config SENSORS_HIH6130 This driver can also be built as a module. If so, the module will be called hih6130. -config SENSORS_HTU21 - tristate "Measurement Specialties HTU21D humidity/temperature sensors" - depends on I2C - help - If you say yes here you get support for the Measurement Specialties - HTU21D humidity and temperature sensors. - - This driver can also be built as a module. If so, the module - will be called htu21. - -config SENSORS_CORETEMP - tristate "Intel Core/Core2/Atom temperature sensor" - depends on X86 - help - If you say yes here you get support for the temperature - sensor inside your CPU. Most of the family 6 CPUs - are supported. Check Documentation/hwmon/coretemp for details. - config SENSORS_IBMAEM tristate "IBM Active Energy Manager temperature/power sensors and control" select IPMI_SI @@ -574,6 +571,14 @@ config SENSORS_IIO_HWMON for those channels specified in the map. This map can be provided either via platform data or the device tree bindings. +config SENSORS_CORETEMP + tristate "Intel Core/Core2/Atom temperature sensor" + depends on X86 + help + If you say yes here you get support for the temperature + sensor inside your CPU. Most of the family 6 CPUs + are supported. Check Documentation/hwmon/coretemp for details. + config SENSORS_IT87 tristate "ITE IT87xx and compatibles" depends on !PPC @@ -622,6 +627,219 @@ config SENSORS_LINEAGE This driver can also be built as a module. If so, the module will be called lineage-pem. +config SENSORS_LTC2945 + tristate "Linear Technology LTC2945" + depends on I2C + select REGMAP_I2C + default n + help + If you say yes here you get support for Linear Technology LTC2945 + I2C System Monitor. + + This driver can also be built as a module. If so, the module will + be called ltc2945. + +config SENSORS_LTC4151 + tristate "Linear Technology LTC4151" + depends on I2C + default n + help + If you say yes here you get support for Linear Technology LTC4151 + High Voltage I2C Current and Voltage Monitor interface. + + This driver can also be built as a module. If so, the module will + be called ltc4151. + +config SENSORS_LTC4215 + tristate "Linear Technology LTC4215" + depends on I2C + default n + help + If you say yes here you get support for Linear Technology LTC4215 + Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4215. + +config SENSORS_LTC4222 + tristate "Linear Technology LTC4222" + depends on I2C + select REGMAP_I2C + default n + help + If you say yes here you get support for Linear Technology LTC4222 + Dual Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4222. + +config SENSORS_LTC4245 + tristate "Linear Technology LTC4245" + depends on I2C + default n + help + If you say yes here you get support for Linear Technology LTC4245 + Multiple Supply Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4245. + +config SENSORS_LTC4260 + tristate "Linear Technology LTC4260" + depends on I2C + select REGMAP_I2C + default n + help + If you say yes here you get support for Linear Technology LTC4260 + Positive Voltage Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4260. + +config SENSORS_LTC4261 + tristate "Linear Technology LTC4261" + depends on I2C + default n + help + If you say yes here you get support for Linear Technology LTC4261 + Negative Voltage Hot Swap Controller I2C interface. + + This driver can also be built as a module. If so, the module will + be called ltc4261. + +config SENSORS_MAX1111 + tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles" + depends on SPI_MASTER + help + Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113 + ADC chips. + + This driver can also be built as a module. If so, the module + will be called max1111. + +config SENSORS_MAX16065 + tristate "Maxim MAX16065 System Manager and compatibles" + depends on I2C + help + If you say yes here you get support for hardware monitoring + capabilities of the following Maxim System Manager chips. + MAX16065 + MAX16066 + MAX16067 + MAX16068 + MAX16070 + MAX16071 + + This driver can also be built as a module. If so, the module + will be called max16065. + +config SENSORS_MAX1619 + tristate "Maxim MAX1619 sensor chip" + depends on I2C + help + If you say yes here you get support for MAX1619 sensor chip. + + This driver can also be built as a module. If so, the module + will be called max1619. + +config SENSORS_MAX1668 + tristate "Maxim MAX1668 and compatibles" + depends on I2C + help + If you say yes here you get support for MAX1668, MAX1989 and + MAX1805 chips. + + This driver can also be built as a module. If so, the module + will be called max1668. + +config SENSORS_MAX197 + tristate "Maxim MAX197 and compatibles" + help + Support for the Maxim MAX197 A/D converter. + Support will include, but not be limited to, MAX197, and MAX199. + + This driver can also be built as a module. If so, the module + will be called max197. + +config SENSORS_MAX6639 + tristate "Maxim MAX6639 sensor chip" + depends on I2C + help + If you say yes here you get support for the MAX6639 + sensor chips. + + This driver can also be built as a module. If so, the module + will be called max6639. + +config SENSORS_MAX6642 + tristate "Maxim MAX6642 sensor chip" + depends on I2C + help + If you say yes here you get support for MAX6642 sensor chip. + MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor + with Overtemperature Alarm from Maxim. + + This driver can also be built as a module. If so, the module + will be called max6642. + +config SENSORS_MAX6650 + tristate "Maxim MAX6650 sensor chip" + depends on I2C + help + If you say yes here you get support for the MAX6650 / MAX6651 + sensor chips. + + This driver can also be built as a module. If so, the module + will be called max6650. + +config SENSORS_MAX6697 + tristate "Maxim MAX6697 and compatibles" + depends on I2C + help + If you say yes here you get support for MAX6581, MAX6602, MAX6622, + MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699 + temperature sensor chips. + + This driver can also be built as a module. If so, the module + will be called max6697. + +config SENSORS_HTU21 + tristate "Measurement Specialties HTU21D humidity/temperature sensors" + depends on I2C + help + If you say yes here you get support for the Measurement Specialties + HTU21D humidity and temperature sensors. + + This driver can also be built as a module. If so, the module + will be called htu21. + +config SENSORS_MCP3021 + tristate "Microchip MCP3021 and compatibles" + depends on I2C + help + If you say yes here you get support for MCP3021 and MCP3221. + The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221 + with 12-bit resolution. + + This driver can also be built as a module. If so, the module + will be called mcp3021. + +config SENSORS_ADCXX + tristate "National Semiconductor ADCxxxSxxx" + depends on SPI_MASTER + help + If you say yes here you get support for the National Semiconductor + ADC<bb><c>S<sss> chip family, where + * bb is the resolution in number of bits (8, 10, 12) + * c is the number of channels (1, 2, 4, 8) + * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 + kSPS and 101 for 1 MSPS) + + Examples : ADC081S101, ADC124S501, ... + + This driver can also be built as a module. If so, the module + will be called adcxx. + config SENSORS_LM63 tristate "National Semiconductor LM63 and compatibles" depends on I2C @@ -784,50 +1002,6 @@ config SENSORS_LM93 This driver can also be built as a module. If so, the module will be called lm93. -config SENSORS_LTC4151 - tristate "Linear Technology LTC4151" - depends on I2C - default n - help - If you say yes here you get support for Linear Technology LTC4151 - High Voltage I2C Current and Voltage Monitor interface. - - This driver can also be built as a module. If so, the module will - be called ltc4151. - -config SENSORS_LTC4215 - tristate "Linear Technology LTC4215" - depends on I2C - default n - help - If you say yes here you get support for Linear Technology LTC4215 - Hot Swap Controller I2C interface. - - This driver can also be built as a module. If so, the module will - be called ltc4215. - -config SENSORS_LTC4245 - tristate "Linear Technology LTC4245" - depends on I2C - default n - help - If you say yes here you get support for Linear Technology LTC4245 - Multiple Supply Hot Swap Controller I2C interface. - - This driver can also be built as a module. If so, the module will - be called ltc4245. - -config SENSORS_LTC4261 - tristate "Linear Technology LTC4261" - depends on I2C - default n - help - If you say yes here you get support for Linear Technology LTC4261 - Negative Voltage Hot Swap Controller I2C interface. - - This driver can also be built as a module. If so, the module will - be called ltc4261. - config SENSORS_LM95234 tristate "National Semiconductor LM95234" depends on I2C @@ -857,125 +1031,33 @@ config SENSORS_LM95245 This driver can also be built as a module. If so, the module will be called lm95245. -config SENSORS_MAX1111 - tristate "Maxim MAX1111 Serial 8-bit ADC chip and compatibles" - depends on SPI_MASTER - help - Say y here to support Maxim's MAX1110, MAX1111, MAX1112, and MAX1113 - ADC chips. - - This driver can also be built as a module. If so, the module - will be called max1111. - -config SENSORS_MAX16065 - tristate "Maxim MAX16065 System Manager and compatibles" - depends on I2C - help - If you say yes here you get support for hardware monitoring - capabilities of the following Maxim System Manager chips. - MAX16065 - MAX16066 - MAX16067 - MAX16068 - MAX16070 - MAX16071 - - This driver can also be built as a module. If so, the module - will be called max16065. - -config SENSORS_MAX1619 - tristate "Maxim MAX1619 sensor chip" - depends on I2C - help - If you say yes here you get support for MAX1619 sensor chip. - - This driver can also be built as a module. If so, the module - will be called max1619. - -config SENSORS_MAX1668 - tristate "Maxim MAX1668 and compatibles" - depends on I2C - help - If you say yes here you get support for MAX1668, MAX1989 and - MAX1805 chips. - - This driver can also be built as a module. If so, the module - will be called max1668. - -config SENSORS_MAX197 - tristate "Maxim MAX197 and compatibles" - help - Support for the Maxim MAX197 A/D converter. - Support will include, but not be limited to, MAX197, and MAX199. - - This driver can also be built as a module. If so, the module - will be called max197. - -config SENSORS_MAX6639 - tristate "Maxim MAX6639 sensor chip" - depends on I2C - help - If you say yes here you get support for the MAX6639 - sensor chips. - - This driver can also be built as a module. If so, the module - will be called max6639. - -config SENSORS_MAX6642 - tristate "Maxim MAX6642 sensor chip" - depends on I2C - help - If you say yes here you get support for MAX6642 sensor chip. - MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor - with Overtemperature Alarm from Maxim. - - This driver can also be built as a module. If so, the module - will be called max6642. - -config SENSORS_MAX6650 - tristate "Maxim MAX6650 sensor chip" - depends on I2C - help - If you say yes here you get support for the MAX6650 / MAX6651 - sensor chips. - - This driver can also be built as a module. If so, the module - will be called max6650. - -config SENSORS_MAX6697 - tristate "Maxim MAX6697 and compatibles" - depends on I2C - help - If you say yes here you get support for MAX6581, MAX6602, MAX6622, - MAX6636, MAX6689, MAX6693, MAX6694, MAX6697, MAX6698, and MAX6699 - temperature sensor chips. - - This driver can also be built as a module. If so, the module - will be called max6697. - -config SENSORS_MCP3021 - tristate "Microchip MCP3021 and compatibles" - depends on I2C +config SENSORS_PC87360 + tristate "National Semiconductor PC87360 family" + depends on !PPC + select HWMON_VID help - If you say yes here you get support for MCP3021 and MCP3221. - The MCP3021 is a A/D converter (ADC) with 10-bit and the MCP3221 - with 12-bit resolution. + If you say yes here you get access to the hardware monitoring + functions of the National Semiconductor PC8736x Super-I/O chips. + The PC87360, PC87363 and PC87364 only have fan monitoring and + control. The PC87365 and PC87366 additionally have voltage and + temperature monitoring. This driver can also be built as a module. If so, the module - will be called mcp3021. + will be called pc87360. -config SENSORS_NCT6775 - tristate "Nuvoton NCT6775F and compatibles" +config SENSORS_PC87427 + tristate "National Semiconductor PC87427" depends on !PPC - select HWMON_VID help - If you say yes here you get support for the hardware monitoring - functionality of the Nuvoton NCT6775F, NCT6776F, NCT6779D - and compatible Super-I/O chips. This driver replaces the - w83627ehf driver for NCT6775F and NCT6776F. + If you say yes here you get access to the hardware monitoring + functions of the National Semiconductor PC87427 Super-I/O chip. + The chip has two distinct logical devices, one for fan speed + monitoring and control, and one for voltage and temperature + monitoring. Fan speed monitoring and control are supported, as + well as temperature monitoring. Voltages aren't supported yet. This driver can also be built as a module. If so, the module - will be called nct6775. + will be called pc87427. config SENSORS_NTC_THERMISTOR tristate "NTC thermistor support" @@ -991,33 +1073,18 @@ config SENSORS_NTC_THERMISTOR This driver can also be built as a module. If so, the module will be called ntc-thermistor. -config SENSORS_PC87360 - tristate "National Semiconductor PC87360 family" +config SENSORS_NCT6775 + tristate "Nuvoton NCT6775F and compatibles" depends on !PPC select HWMON_VID help - If you say yes here you get access to the hardware monitoring - functions of the National Semiconductor PC8736x Super-I/O chips. - The PC87360, PC87363 and PC87364 only have fan monitoring and - control. The PC87365 and PC87366 additionally have voltage and - temperature monitoring. - - This driver can also be built as a module. If so, the module - will be called pc87360. - -config SENSORS_PC87427 - tristate "National Semiconductor PC87427" - depends on !PPC - help - If you say yes here you get access to the hardware monitoring - functions of the National Semiconductor PC87427 Super-I/O chip. - The chip has two distinct logical devices, one for fan speed - monitoring and control, and one for voltage and temperature - monitoring. Fan speed monitoring and control are supported, as - well as temperature monitoring. Voltages aren't supported yet. + If you say yes here you get support for the hardware monitoring + functionality of the Nuvoton NCT6775F, NCT6776F, NCT6779D + and compatible Super-I/O chips. This driver replaces the + w83627ehf driver for NCT6775F and NCT6776F. This driver can also be built as a module. If so, the module - will be called pc87427. + will be called nct6775. config SENSORS_PCF8591 tristate "Philips PCF8591 ADC/DAC" @@ -1082,21 +1149,6 @@ config SENSORS_SIS5595 This driver can also be built as a module. If so, the module will be called sis5595. -config SENSORS_SMM665 - tristate "Summit Microelectronics SMM665" - depends on I2C - default n - help - If you say yes here you get support for the hardware monitoring - features of the Summit Microelectronics SMM665/SMM665B Six-Channel - Active DC Output Controller / Monitor. - - Other supported chips are SMM465, SMM665C, SMM764, and SMM766. - Support for those chips is untested. - - This driver can also be built as a module. If so, the module will - be called smm665. - config SENSORS_DME1737 tristate "SMSC DME1737, SCH311x and compatibles" depends on I2C && !PPC @@ -1218,6 +1270,31 @@ config SENSORS_SCH5636 This driver can also be built as a module. If so, the module will be called sch5636. +config SENSORS_SMM665 + tristate "Summit Microelectronics SMM665" + depends on I2C + default n + help + If you say yes here you get support for the hardware monitoring + features of the Summit Microelectronics SMM665/SMM665B Six-Channel + Active DC Output Controller / Monitor. + + Other supported chips are SMM465, SMM665C, SMM764, and SMM766. + Support for those chips is untested. + + This driver can also be built as a module. If so, the module will + be called smm665. + +config SENSORS_ADC128D818 + tristate "Texas Instruments ADC128D818" + depends on I2C + help + If you say yes here you get support for the Texas Instruments + ADC128D818 System Monitor with Temperature Sensor chip. + + This driver can also be built as a module. If so, the module + will be called adc128d818. + config SENSORS_ADS1015 tristate "Texas Instruments ADS1015" depends on I2C @@ -1533,37 +1610,6 @@ config SENSORS_ULTRA45 This driver provides support for the Ultra45 workstation environmental sensors. -config SENSORS_APPLESMC - tristate "Apple SMC (Motion sensor, light sensor, keyboard backlight)" - depends on INPUT && X86 - select NEW_LEDS - select LEDS_CLASS - select INPUT_POLLDEV - default n - help - This driver provides support for the Apple System Management - Controller, which provides an accelerometer (Apple Sudden Motion - Sensor), light sensors, temperature sensors, keyboard backlight - control and fan control. - - Only Intel-based Apple's computers are supported (MacBook Pro, - MacBook, MacMini). - - Data from the different sensors, keyboard backlight control and fan - control are accessible via sysfs. - - This driver also provides an absolute input class device, allowing - the laptop to act as a pinball machine-esque joystick. - - Say Y here if you have an applicable laptop and want to experience - the awesome power of applesmc. - -config SENSORS_MC13783_ADC - tristate "Freescale MC13783/MC13892 ADC" - depends on MFD_MC13XXX - help - Support for the A/D converter on MC13783 and MC13892 PMIC. - if ACPI comment "ACPI drivers" |