diff options
Diffstat (limited to 'drivers/hwmon')
-rw-r--r-- | drivers/hwmon/it87.c | 125 |
1 files changed, 99 insertions, 26 deletions
diff --git a/drivers/hwmon/it87.c b/drivers/hwmon/it87.c index 0b204e4..aebac13 100644 --- a/drivers/hwmon/it87.c +++ b/drivers/hwmon/it87.c @@ -19,6 +19,8 @@ * IT8726F Super I/O chip w/LPC interface * IT8728F Super I/O chip w/LPC interface * IT8758E Super I/O chip w/LPC interface + * IT8782F Super I/O chip w/LPC interface + * IT8783E/F Super I/O chip w/LPC interface * Sis950 A clone of the IT8705F * * Copyright (C) 2001 Chris Gauthron @@ -59,7 +61,8 @@ #define DRVNAME "it87" -enum chips { it87, it8712, it8716, it8718, it8720, it8721, it8728 }; +enum chips { it87, it8712, it8716, it8718, it8720, it8721, it8728, it8782, + it8783 }; static unsigned short force_id; module_param(force_id, ushort, 0); @@ -137,13 +140,18 @@ static inline void superio_exit(void) #define IT8721F_DEVID 0x8721 #define IT8726F_DEVID 0x8726 #define IT8728F_DEVID 0x8728 +#define IT8782F_DEVID 0x8782 +#define IT8783E_DEVID 0x8783 #define IT87_ACT_REG 0x30 #define IT87_BASE_REG 0x60 /* Logical device 7 registers (IT8712F and later) */ +#define IT87_SIO_GPIO1_REG 0x25 #define IT87_SIO_GPIO3_REG 0x27 #define IT87_SIO_GPIO5_REG 0x29 +#define IT87_SIO_PINX1_REG 0x2a /* Pin selection */ #define IT87_SIO_PINX2_REG 0x2c /* Pin selection */ +#define IT87_SIO_SPI_REG 0xef /* SPI function pin select */ #define IT87_SIO_VID_REG 0xfc /* VID value */ #define IT87_SIO_BEEP_PIN_REG 0xf6 /* Beep pin mapping */ @@ -304,31 +312,23 @@ static inline int has_newer_autopwm(const struct it87_data *data) || data->type == it8728; } -static u8 in_to_reg(const struct it87_data *data, int nr, long val) +static int adc_lsb(const struct it87_data *data, int nr) { - long lsb; - - if (has_12mv_adc(data)) { - if (data->in_scaled & (1 << nr)) - lsb = 24; - else - lsb = 12; - } else - lsb = 16; + int lsb = has_12mv_adc(data) ? 12 : 16; + if (data->in_scaled & (1 << nr)) + lsb <<= 1; + return lsb; +} - val = DIV_ROUND_CLOSEST(val, lsb); +static u8 in_to_reg(const struct it87_data *data, int nr, long val) +{ + val = DIV_ROUND_CLOSEST(val, adc_lsb(data, nr)); return SENSORS_LIMIT(val, 0, 255); } static int in_from_reg(const struct it87_data *data, int nr, int val) { - if (has_12mv_adc(data)) { - if (data->in_scaled & (1 << nr)) - return val * 24; - else - return val * 12; - } else - return val * 16; + return val * adc_lsb(data, nr); } static inline u8 FAN_TO_REG(long rpm, int div) @@ -407,7 +407,9 @@ static inline int has_16bit_fans(const struct it87_data *data) || data->type == it8718 || data->type == it8720 || data->type == it8721 - || data->type == it8728; + || data->type == it8728 + || data->type == it8782 + || data->type == it8783; } static inline int has_old_autopwm(const struct it87_data *data) @@ -1651,6 +1653,12 @@ static int __init it87_find(unsigned short *address, case IT8728F_DEVID: sio_data->type = it8728; break; + case IT8782F_DEVID: + sio_data->type = it8782; + break; + case IT8783E_DEVID: + sio_data->type = it8783; + break; case 0xffff: /* No device at all */ goto exit; default: @@ -1686,16 +1694,68 @@ static int __init it87_find(unsigned short *address, /* The IT8705F has a different LD number for GPIO */ superio_select(5); sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f; + } else if (sio_data->type == it8783) { + int reg25, reg27, reg2A, reg2C, regEF; + bool uart6; + + sio_data->skip_vid = 1; /* No VID */ + + superio_select(GPIO); + + reg25 = superio_inb(IT87_SIO_GPIO1_REG); + reg27 = superio_inb(IT87_SIO_GPIO3_REG); + reg2A = superio_inb(IT87_SIO_PINX1_REG); + reg2C = superio_inb(IT87_SIO_PINX2_REG); + regEF = superio_inb(IT87_SIO_SPI_REG); + + uart6 = reg2C & (1 << 2); + + /* Check if fan3 is there or not */ + if ((reg27 & (1 << 0)) || !uart6) + sio_data->skip_fan |= (1 << 2); + if ((reg25 & (1 << 4)) + || (!(reg2A & (1 << 1)) && (regEF & (1 << 0)))) + sio_data->skip_pwm |= (1 << 2); + + /* Check if fan2 is there or not */ + if (reg27 & (1 << 7)) + sio_data->skip_fan |= (1 << 1); + if (reg27 & (1 << 3)) + sio_data->skip_pwm |= (1 << 1); + + /* VIN5 */ + if ((reg27 & (1 << 0)) || uart6) + ; /* No VIN5 */ + + /* VIN6 */ + if ((reg27 & (1 << 1)) || uart6) + ; /* No VIN6 */ + + /* + * VIN7 + * Does not depend on bit 2 of Reg2C, contrary to datasheet. + */ + if (reg27 & (1 << 2)) + ; /* No VIN7 (unless internal) */ + + if (reg2C & (1 << 0)) + sio_data->internal |= (1 << 0); + if (reg2C & (1 << 1)) + sio_data->internal |= (1 << 1); + + sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f; + } else { int reg; superio_select(GPIO); reg = superio_inb(IT87_SIO_GPIO3_REG); - if (sio_data->type == it8721 || sio_data->type == it8728) { + if (sio_data->type == it8721 || sio_data->type == it8728 || + sio_data->type == it8782) { /* - * The IT8721F/IT8758E doesn't have VID pins at all, - * not sure about the IT8728F. + * IT8721F/IT8758E, and IT8782F don't have VID pins + * at all, not sure about the IT8728F. */ sio_data->skip_vid = 1; } else { @@ -1733,8 +1793,13 @@ static int __init it87_find(unsigned short *address, * configured, even though the IT8720F datasheet claims * that the internal routing of VCCH to VIN7 is the default * setting. So we force the internal routing in this case. + * + * On IT8782F, VIN7 is multiplexed with one of the UART6 pins. + * If UART6 is enabled, re-route VIN7 to the internal divider. */ - if (sio_data->type == it8720 && !(reg & (1 << 1))) { + if ((sio_data->type == it8720 || + (sio_data->type == it8782 && (reg & (1 << 2)))) + && !(reg & (1 << 1))) { reg |= (1 << 1); superio_outb(IT87_SIO_PINX2_REG, reg); pr_notice("Routing internal VCCH to in7\n"); @@ -1823,6 +1888,8 @@ static int __devinit it87_probe(struct platform_device *pdev) "it8720", "it8721", "it8728", + "it8782", + "it8783", }; res = platform_get_resource(pdev, IORESOURCE_IO, 0); @@ -1867,6 +1934,11 @@ static int __devinit it87_probe(struct platform_device *pdev) data->in_scaled |= (1 << 7); /* in7 is VSB */ if (sio_data->internal & (1 << 2)) data->in_scaled |= (1 << 8); /* in8 is Vbat */ + } else if (sio_data->type == it8782 || sio_data->type == it8783) { + if (sio_data->internal & (1 << 0)) + data->in_scaled |= (1 << 3); /* in3 is VCC5V */ + if (sio_data->internal & (1 << 1)) + data->in_scaled |= (1 << 7); /* in7 is VCCH5V */ } /* Initialize the IT87 chip */ @@ -2143,8 +2215,9 @@ static void __devinit it87_init_device(struct platform_device *pdev) it87_write_value(data, IT87_REG_FAN_16BIT, tmp | 0x07); } - /* IT8705F only supports three fans. */ - if (data->type != it87) { + /* IT8705F, IT8782F, and IT8783E/F only support three fans. */ + if (data->type != it87 && data->type != it8782 && + data->type != it8783) { if (tmp & (1 << 4)) data->has_fan |= (1 << 3); /* fan4 enabled */ if (tmp & (1 << 5)) |