summaryrefslogtreecommitdiff
path: root/drivers/hwmon
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon')
-rw-r--r--drivers/hwmon/Kconfig4
-rw-r--r--drivers/hwmon/f71882fg.c192
2 files changed, 158 insertions, 38 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 79117c3..f8090e1 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -306,11 +306,11 @@ config SENSORS_F71805F
will be called f71805f.
config SENSORS_F71882FG
- tristate "Fintek F71862FG, F71882FG and F8000"
+ tristate "Fintek F71858FG, F71862FG, F71882FG and F8000"
depends on EXPERIMENTAL
help
If you say yes here you get support for hardware monitoring
- features of the Fintek F71882FG/F71883FG, F71862FG/71863FG
+ features of the Fintek F71858FG, F71862FG/71863FG, F71882FG/F71883FG
and F8000 Super-I/O chips.
This driver can also be built as a module. If so, the module
diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c
index 7e5b94c..4146105 100644
--- a/drivers/hwmon/f71882fg.c
+++ b/drivers/hwmon/f71882fg.c
@@ -32,6 +32,7 @@
#define DRVNAME "f71882fg"
+#define SIO_F71858FG_LD_HWM 0x02 /* Hardware monitor logical device */
#define SIO_F71882FG_LD_HWM 0x04 /* Hardware monitor logical device */
#define SIO_UNLOCK_KEY 0x87 /* Key to enable Super-I/O */
#define SIO_LOCK_KEY 0xAA /* Key to diasble Super-I/O */
@@ -44,6 +45,7 @@
#define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */
#define SIO_FINTEK_ID 0x1934 /* Manufacturers ID */
+#define SIO_F71858_ID 0x0507 /* Chipset ID */
#define SIO_F71862_ID 0x0601 /* Chipset ID */
#define SIO_F71882_ID 0x0541 /* Chipset ID */
#define SIO_F8000_ID 0x0581 /* Chipset ID */
@@ -70,6 +72,7 @@
#define F71882FG_REG_TEMP_HIGH(nr) (0x81 + 2 * (nr))
#define F71882FG_REG_TEMP_STATUS 0x62
#define F71882FG_REG_TEMP_BEEP 0x63
+#define F71882FG_REG_TEMP_CONFIG 0x69
#define F71882FG_REG_TEMP_HYST(nr) (0x6C + (nr))
#define F71882FG_REG_TEMP_TYPE 0x6B
#define F71882FG_REG_TEMP_DIODE_OPEN 0x6F
@@ -92,9 +95,10 @@ static unsigned short force_id;
module_param(force_id, ushort, 0);
MODULE_PARM_DESC(force_id, "Override the detected device ID");
-enum chips { f71862fg, f71882fg, f8000 };
+enum chips { f71858fg, f71862fg, f71882fg, f8000 };
static const char *f71882fg_names[] = {
+ "f71858fg",
"f71862fg",
"f71882fg",
"f8000",
@@ -119,6 +123,7 @@ struct f71882fg_data {
struct device *hwmon_dev;
struct mutex update_lock;
+ int temp_start; /* temp numbering start (0 or 1) */
char valid; /* !=0 if following fields are valid */
unsigned long last_updated; /* In jiffies */
unsigned long last_limits; /* In jiffies */
@@ -136,7 +141,7 @@ struct f71882fg_data {
/* Note: all models have only 3 temperature channels, but on some
they are addressed as 0-2 and on others as 1-3, so for coding
convenience we reserve space for 4 channels */
- u8 temp[4];
+ u16 temp[4];
u8 temp_ovt[4];
u8 temp_high[4];
u8 temp_hyst[2]; /* 2 hysts stored per reg */
@@ -144,6 +149,7 @@ struct f71882fg_data {
u8 temp_status;
u8 temp_beep;
u8 temp_diode_open;
+ u8 temp_config;
u8 pwm[4];
u8 pwm_enable;
u8 pwm_auto_point_hyst[2];
@@ -252,6 +258,50 @@ static struct platform_driver f71882fg_driver = {
static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
+/* Temp and in attr for the f71858fg */
+static struct sensor_device_attribute_2 f71858fg_in_temp_attr[] = {
+ SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0),
+ SENSOR_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 0, 1),
+ SENSOR_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 0, 2),
+ SENSOR_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0, 0),
+ SENSOR_ATTR_2(temp1_max, S_IRUGO|S_IWUSR, show_temp_max,
+ store_temp_max, 0, 0),
+ SENSOR_ATTR_2(temp1_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst,
+ store_temp_max_hyst, 0, 0),
+ SENSOR_ATTR_2(temp1_max_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 0),
+ SENSOR_ATTR_2(temp1_crit, S_IRUGO|S_IWUSR, show_temp_crit,
+ store_temp_crit, 0, 0),
+ SENSOR_ATTR_2(temp1_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL,
+ 0, 0),
+ SENSOR_ATTR_2(temp1_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 4),
+ SENSOR_ATTR_2(temp1_fault, S_IRUGO, show_temp_fault, NULL, 0, 0),
+ SENSOR_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0, 1),
+ SENSOR_ATTR_2(temp2_max, S_IRUGO|S_IWUSR, show_temp_max,
+ store_temp_max, 0, 1),
+ SENSOR_ATTR_2(temp2_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst,
+ store_temp_max_hyst, 0, 1),
+ SENSOR_ATTR_2(temp2_max_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 1),
+ SENSOR_ATTR_2(temp2_crit, S_IRUGO|S_IWUSR, show_temp_crit,
+ store_temp_crit, 0, 1),
+ SENSOR_ATTR_2(temp2_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL,
+ 0, 1),
+ SENSOR_ATTR_2(temp2_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 5),
+ SENSOR_ATTR_2(temp2_type, S_IRUGO, show_temp_type, NULL, 0, 1),
+ SENSOR_ATTR_2(temp2_fault, S_IRUGO, show_temp_fault, NULL, 0, 1),
+ SENSOR_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 0, 2),
+ SENSOR_ATTR_2(temp3_max, S_IRUGO|S_IWUSR, show_temp_max,
+ store_temp_max, 0, 2),
+ SENSOR_ATTR_2(temp3_max_hyst, S_IRUGO|S_IWUSR, show_temp_max_hyst,
+ store_temp_max_hyst, 0, 2),
+ SENSOR_ATTR_2(temp3_max_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 2),
+ SENSOR_ATTR_2(temp3_crit, S_IRUGO|S_IWUSR, show_temp_crit,
+ store_temp_crit, 0, 2),
+ SENSOR_ATTR_2(temp3_crit_hyst, S_IRUGO, show_temp_crit_hyst, NULL,
+ 0, 2),
+ SENSOR_ATTR_2(temp3_crit_alarm, S_IRUGO, show_temp_alarm, NULL, 0, 6),
+ SENSOR_ATTR_2(temp3_fault, S_IRUGO, show_temp_fault, NULL, 0, 2),
+};
+
/* Temp and in attr common to both the f71862fg and f71882fg */
static struct sensor_device_attribute_2 f718x2fg_in_temp_attr[] = {
SENSOR_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0),
@@ -476,22 +526,8 @@ static struct sensor_device_attribute_2 f71862fg_fan_attr[] = {
show_pwm_auto_point_temp_hyst, NULL, 3, 2),
};
-/* Fan / PWM attr for the f71882fg */
-static struct sensor_device_attribute_2 f71882fg_fan_attr[] = {
- SENSOR_ATTR_2(fan1_beep, S_IRUGO|S_IWUSR, show_fan_beep,
- store_fan_beep, 0, 0),
- SENSOR_ATTR_2(fan2_beep, S_IRUGO|S_IWUSR, show_fan_beep,
- store_fan_beep, 0, 1),
- SENSOR_ATTR_2(fan3_beep, S_IRUGO|S_IWUSR, show_fan_beep,
- store_fan_beep, 0, 2),
- SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3),
- SENSOR_ATTR_2(fan4_full_speed, S_IRUGO|S_IWUSR,
- show_fan_full_speed,
- store_fan_full_speed, 0, 3),
- SENSOR_ATTR_2(fan4_beep, S_IRUGO|S_IWUSR, show_fan_beep,
- store_fan_beep, 0, 3),
- SENSOR_ATTR_2(fan4_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 3),
-
+/* Fan / PWM attr common to both the f71882fg and f71858fg */
+static struct sensor_device_attribute_2 f71882fg_f71858fg_fan_attr[] = {
SENSOR_ATTR_2(pwm1_auto_point1_pwm, S_IRUGO|S_IWUSR,
show_pwm_auto_point_pwm, store_pwm_auto_point_pwm,
0, 0),
@@ -605,6 +641,24 @@ static struct sensor_device_attribute_2 f71882fg_fan_attr[] = {
show_pwm_auto_point_temp_hyst, NULL, 2, 2),
SENSOR_ATTR_2(pwm3_auto_point4_temp_hyst, S_IRUGO,
show_pwm_auto_point_temp_hyst, NULL, 3, 2),
+};
+
+/* Fan / PWM attr found on the f71882fg but not on the f71858fg */
+static struct sensor_device_attribute_2 f71882fg_fan_attr[] = {
+ SENSOR_ATTR_2(fan1_beep, S_IRUGO|S_IWUSR, show_fan_beep,
+ store_fan_beep, 0, 0),
+ SENSOR_ATTR_2(fan2_beep, S_IRUGO|S_IWUSR, show_fan_beep,
+ store_fan_beep, 0, 1),
+ SENSOR_ATTR_2(fan3_beep, S_IRUGO|S_IWUSR, show_fan_beep,
+ store_fan_beep, 0, 2),
+
+ SENSOR_ATTR_2(fan4_input, S_IRUGO, show_fan, NULL, 0, 3),
+ SENSOR_ATTR_2(fan4_full_speed, S_IRUGO|S_IWUSR,
+ show_fan_full_speed,
+ store_fan_full_speed, 0, 3),
+ SENSOR_ATTR_2(fan4_beep, S_IRUGO|S_IWUSR, show_fan_beep,
+ store_fan_beep, 0, 3),
+ SENSOR_ATTR_2(fan4_alarm, S_IRUGO, show_fan_alarm, NULL, 0, 3),
SENSOR_ATTR_2(pwm4, S_IRUGO|S_IWUSR, show_pwm, store_pwm, 0, 3),
SENSOR_ATTR_2(pwm4_enable, S_IRUGO|S_IWUSR, show_pwm_enable,
@@ -855,13 +909,20 @@ static void f71882fg_write16(struct f71882fg_data *data, u8 reg, u16 val)
outb(val & 255, data->addr + DATA_REG_OFFSET);
}
+static u16 f71882fg_read_temp(struct f71882fg_data *data, int nr)
+{
+ if (data->type == f71858fg)
+ return f71882fg_read16(data, F71882FG_REG_TEMP(nr));
+ else
+ return f71882fg_read8(data, F71882FG_REG_TEMP(nr));
+}
+
static struct f71882fg_data *f71882fg_update_device(struct device *dev)
{
struct f71882fg_data *data = dev_get_drvdata(dev);
int nr, reg = 0, reg2;
int nr_fans = (data->type == f71882fg) ? 4 : 3;
- int nr_ins = (data->type == f8000) ? 3 : 9;
- int temp_start = (data->type == f8000) ? 0 : 1;
+ int nr_ins = (data->type == f71858fg || data->type == f8000) ? 3 : 9;
mutex_lock(&data->update_lock);
@@ -876,7 +937,7 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
}
/* Get High & boundary temps*/
- for (nr = temp_start; nr < 3 + temp_start; nr++) {
+ for (nr = data->temp_start; nr < 3 + data->temp_start; nr++) {
data->temp_ovt[nr] = f71882fg_read8(data,
F71882FG_REG_TEMP_OVT(nr));
data->temp_high[nr] = f71882fg_read8(data,
@@ -884,14 +945,17 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
}
if (data->type != f8000) {
- data->fan_beep = f71882fg_read8(data,
- F71882FG_REG_FAN_BEEP);
- data->temp_beep = f71882fg_read8(data,
- F71882FG_REG_TEMP_BEEP);
data->temp_hyst[0] = f71882fg_read8(data,
F71882FG_REG_TEMP_HYST(0));
data->temp_hyst[1] = f71882fg_read8(data,
F71882FG_REG_TEMP_HYST(1));
+ }
+
+ if (data->type == f71862fg || data->type == f71882fg) {
+ data->fan_beep = f71882fg_read8(data,
+ F71882FG_REG_FAN_BEEP);
+ data->temp_beep = f71882fg_read8(data,
+ F71882FG_REG_TEMP_BEEP);
/* Have to hardcode type, because temp1 is special */
reg = f71882fg_read8(data, F71882FG_REG_TEMP_TYPE);
data->temp_type[2] = (reg & 0x04) ? 2 : 4;
@@ -902,10 +966,10 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
data->temp_type[1] = 6 /* PECI */;
else if ((reg2 & 0x03) == 0x02)
data->temp_type[1] = 5 /* AMDSI */;
- else if (data->type != f8000)
+ else if (data->type == f71862fg || data->type == f71882fg)
data->temp_type[1] = (reg & 0x02) ? 2 : 4;
else
- data->temp_type[1] = 2; /* F8000 only supports BJT */
+ data->temp_type[1] = 2; /* Only supports BJT */
data->pwm_enable = f71882fg_read8(data,
F71882FG_REG_PWM_ENABLE);
@@ -961,9 +1025,8 @@ static struct f71882fg_data *f71882fg_update_device(struct device *dev)
F71882FG_REG_TEMP_STATUS);
data->temp_diode_open = f71882fg_read8(data,
F71882FG_REG_TEMP_DIODE_OPEN);
- for (nr = temp_start; nr < 3 + temp_start; nr++)
- data->temp[nr] = f71882fg_read8(data,
- F71882FG_REG_TEMP(nr));
+ for (nr = data->temp_start; nr < 3 + data->temp_start; nr++)
+ data->temp[nr] = f71882fg_read_temp(data, nr);
data->fan_status = f71882fg_read8(data,
F71882FG_REG_FAN_STATUS);
@@ -1166,8 +1229,24 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
{
struct f71882fg_data *data = f71882fg_update_device(dev);
int nr = to_sensor_dev_attr_2(devattr)->index;
+ int sign, temp;
+
+ if (data->type == f71858fg) {
+ /* TEMP_TABLE_SEL 1 or 3 ? */
+ if (data->temp_config & 1) {
+ sign = data->temp[nr] & 0x0001;
+ temp = (data->temp[nr] >> 5) & 0x7ff;
+ } else {
+ sign = data->temp[nr] & 0x8000;
+ temp = (data->temp[nr] >> 5) & 0x3ff;
+ }
+ temp *= 125;
+ if (sign)
+ temp -= 128000;
+ } else
+ temp = data->temp[nr] * 1000;
- return sprintf(buf, "%d\n", data->temp[nr] * 1000);
+ return sprintf(buf, "%d\n", temp);
}
static ssize_t show_temp_max(struct device *dev, struct device_attribute
@@ -1460,6 +1539,12 @@ static ssize_t store_pwm_enable(struct device *dev, struct device_attribute
} else {
switch (val) {
case 1:
+ /* The f71858fg does not support manual RPM mode */
+ if (data->type == f71858fg &&
+ ((data->pwm_enable >> (2 * nr)) & 1)) {
+ count = -EINVAL;
+ goto leave;
+ }
data->pwm_enable |= 2 << (2 * nr);
break; /* Manual */
case 2:
@@ -1618,9 +1703,9 @@ static ssize_t show_pwm_auto_point_channel(struct device *dev,
int result;
struct f71882fg_data *data = f71882fg_update_device(dev);
int nr = to_sensor_dev_attr_2(devattr)->index;
- int temp_start = (data->type == f8000) ? 0 : 1;
- result = 1 << ((data->pwm_auto_point_mapping[nr] & 3) - temp_start);
+ result = 1 << ((data->pwm_auto_point_mapping[nr] & 3) -
+ data->temp_start);
return sprintf(buf, "%d\n", result);
}
@@ -1631,7 +1716,6 @@ static ssize_t store_pwm_auto_point_channel(struct device *dev,
{
struct f71882fg_data *data = dev_get_drvdata(dev);
int nr = to_sensor_dev_attr_2(devattr)->index;
- int temp_start = (data->type == f8000) ? 0 : 1;
long val = simple_strtol(buf, NULL, 10);
switch (val) {
@@ -1647,7 +1731,7 @@ static ssize_t store_pwm_auto_point_channel(struct device *dev,
default:
return -EINVAL;
}
- val += temp_start;
+ val += data->temp_start;
mutex_lock(&data->update_lock);
data->pwm_auto_point_mapping[nr] =
f71882fg_read8(data, F71882FG_REG_POINT_MAPPING(nr));
@@ -1723,6 +1807,8 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
data->addr = platform_get_resource(pdev, IORESOURCE_IO, 0)->start;
data->type = sio_data->type;
+ data->temp_start =
+ (data->type == f71858fg || data->type == f8000) ? 0 : 1;
mutex_init(&data->update_lock);
platform_set_drvdata(pdev, data);
@@ -1745,6 +1831,20 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
if (start_reg & 0x01) {
switch (data->type) {
+ case f71858fg:
+ data->temp_config =
+ f71882fg_read8(data, F71882FG_REG_TEMP_CONFIG);
+ if (data->temp_config & 0x10)
+ /* The f71858fg temperature alarms behave as
+ the f8000 alarms in this mode */
+ err = f71882fg_create_sysfs_files(pdev,
+ f8000_in_temp_attr,
+ ARRAY_SIZE(f8000_in_temp_attr));
+ else
+ err = f71882fg_create_sysfs_files(pdev,
+ f71858fg_in_temp_attr,
+ ARRAY_SIZE(f71858fg_in_temp_attr));
+ break;
case f71882fg:
err = f71882fg_create_sysfs_files(pdev,
f71882fg_in_temp_attr,
@@ -1773,6 +1873,12 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
/* Sanity check the pwm settings */
switch (data->type) {
+ case f71858fg:
+ err = 0;
+ for (i = 0; i < nr_fans; i++)
+ if (((data->pwm_enable >> (i * 2)) & 3) == 3)
+ err = 1;
+ break;
case f71862fg:
err = (data->pwm_enable & 0x15) != 0x15;
break;
@@ -1806,6 +1912,13 @@ static int __devinit f71882fg_probe(struct platform_device *pdev)
err = f71882fg_create_sysfs_files(pdev,
f71882fg_fan_attr,
ARRAY_SIZE(f71882fg_fan_attr));
+ if (err)
+ goto exit_unregister_sysfs;
+ /* fall through! */
+ case f71858fg:
+ err = f71882fg_create_sysfs_files(pdev,
+ f71882fg_f71858fg_fan_attr,
+ ARRAY_SIZE(f71882fg_f71858fg_fan_attr));
break;
case f8000:
err = f71882fg_create_sysfs_files(pdev,
@@ -1890,6 +2003,9 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
devid = force_id ? force_id : superio_inw(sioaddr, SIO_REG_DEVID);
switch (devid) {
+ case SIO_F71858_ID:
+ sio_data->type = f71858fg;
+ break;
case SIO_F71862_ID:
sio_data->type = f71862fg;
break;
@@ -1904,7 +2020,11 @@ static int __init f71882fg_find(int sioaddr, unsigned short *address,
goto exit;
}
- superio_select(sioaddr, SIO_F71882FG_LD_HWM);
+ if (sio_data->type == f71858fg)
+ superio_select(sioaddr, SIO_F71858FG_LD_HWM);
+ else
+ superio_select(sioaddr, SIO_F71882FG_LD_HWM);
+
if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) {
printk(KERN_WARNING DRVNAME ": Device not activated\n");
goto exit;
generated by cgit v0.10.2 at 2024-10-30 08:46:18 (GMT)