diff options
Diffstat (limited to 'drivers/hwmon')
| -rw-r--r-- | drivers/hwmon/Kconfig | 19 | ||||
| -rw-r--r-- | drivers/hwmon/ad7414.c | 1 | ||||
| -rw-r--r-- | drivers/hwmon/adt7411.c | 1 | ||||
| -rw-r--r-- | drivers/hwmon/f71882fg.c | 4 | ||||
| -rw-r--r-- | drivers/hwmon/jc42.c | 35 | ||||
| -rw-r--r-- | drivers/hwmon/k10temp.c | 5 | ||||
| -rw-r--r-- | drivers/hwmon/lm85.c | 23 | ||||
| -rw-r--r-- | drivers/hwmon/ultra45_env.c | 9 |
8 files changed, 72 insertions, 25 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 773e484..297bc9a 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -238,13 +238,13 @@ config SENSORS_K8TEMP will be called k8temp. config SENSORS_K10TEMP - tristate "AMD Phenom/Sempron/Turion/Opteron temperature sensor" + tristate "AMD Family 10h/11h/12h/14h temperature sensor" depends on X86 && PCI help If you say yes here you get support for the temperature sensor(s) inside your CPU. Supported are later revisions of - the AMD Family 10h and all revisions of the AMD Family 11h - microarchitectures. + the AMD Family 10h and all revisions of the AMD Family 11h, + 12h (Llano), and 14h (Brazos) microarchitectures. This driver can also be built as a module. If so, the module will be called k10temp. @@ -455,13 +455,14 @@ config SENSORS_JZ4740 called jz4740-hwmon. config SENSORS_JC42 - tristate "JEDEC JC42.4 compliant temperature sensors" + tristate "JEDEC JC42.4 compliant memory module temperature sensors" depends on I2C help - If you say yes here you get support for Jedec JC42.4 compliant - temperature sensors. Support will include, but not be limited to, - ADT7408, CAT34TS02,, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243, - MCP9843, SE97, SE98, STTS424, TSE2002B3, and TS3000B3. + If you say yes here, you get support for JEDEC JC42.4 compliant + temperature sensors, which are used on many DDR3 memory modules for + mobile devices and servers. Support will include, but not be limited + to, ADT7408, CAT34TS02, CAT6095, MAX6604, MCP9805, MCP98242, MCP98243, + MCP9843, SE97, SE98, STTS424(E), TSE2002B3, and TS3000B3. This driver can also be built as a module. If so, the module will be called jc42. @@ -574,7 +575,7 @@ config SENSORS_LM85 help If you say yes here you get support for National Semiconductor LM85 sensor chips and clones: ADM1027, ADT7463, ADT7468, EMC6D100, - EMC6D101 and EMC6D102. + EMC6D101, EMC6D102, and EMC6D103. This driver can also be built as a module. If so, the module will be called lm85. diff --git a/drivers/hwmon/ad7414.c b/drivers/hwmon/ad7414.c index 86d822a..d46c0c7 100644 --- a/drivers/hwmon/ad7414.c +++ b/drivers/hwmon/ad7414.c @@ -242,6 +242,7 @@ static const struct i2c_device_id ad7414_id[] = { { "ad7414", 0 }, {} }; +MODULE_DEVICE_TABLE(i2c, ad7414_id); static struct i2c_driver ad7414_driver = { .driver = { diff --git a/drivers/hwmon/adt7411.c b/drivers/hwmon/adt7411.c index f13c843..5cc3e37 100644 --- a/drivers/hwmon/adt7411.c +++ b/drivers/hwmon/adt7411.c @@ -334,6 +334,7 @@ static const struct i2c_device_id adt7411_id[] = { { "adt7411", 0 }, { } }; +MODULE_DEVICE_TABLE(i2c, adt7411_id); static struct i2c_driver adt7411_driver = { .driver = { diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c index 3f49dd3..6e06019 100644 --- a/drivers/hwmon/f71882fg.c +++ b/drivers/hwmon/f71882fg.c @@ -37,7 +37,7 @@ #define SIO_F71858FG_LD_HWM 0x02 /* Hardware monitor logical device */ #define SIO_F71882FG_LD_HWM 0x04 /* Hardware monitor logical device */ #define SIO_UNLOCK_KEY 0x87 /* Key to enable Super-I/O */ -#define SIO_LOCK_KEY 0xAA /* Key to diasble Super-I/O */ +#define SIO_LOCK_KEY 0xAA /* Key to disable Super-I/O */ #define SIO_REG_LDSEL 0x07 /* Logical device select */ #define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */ @@ -2111,7 +2111,6 @@ static int f71882fg_remove(struct platform_device *pdev) int nr_fans = (data->type == f71882fg) ? 4 : 3; u8 start_reg = f71882fg_read8(data, F71882FG_REG_START); - platform_set_drvdata(pdev, NULL); if (data->hwmon_dev) hwmon_device_unregister(data->hwmon_dev); @@ -2178,6 +2177,7 @@ static int f71882fg_remove(struct platform_device *pdev) } } + platform_set_drvdata(pdev, NULL); kfree(data); return 0; diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c index 340fc78..9349912 100644 --- a/drivers/hwmon/jc42.c +++ b/drivers/hwmon/jc42.c @@ -53,6 +53,8 @@ static const unsigned short normal_i2c[] = { /* Configuration register defines */ #define JC42_CFG_CRIT_ONLY (1 << 2) +#define JC42_CFG_TCRIT_LOCK (1 << 6) +#define JC42_CFG_EVENT_LOCK (1 << 7) #define JC42_CFG_SHUTDOWN (1 << 8) #define JC42_CFG_HYST_SHIFT 9 #define JC42_CFG_HYST_MASK 0x03 @@ -332,7 +334,7 @@ static ssize_t set_temp_crit_hyst(struct device *dev, { struct i2c_client *client = to_i2c_client(dev); struct jc42_data *data = i2c_get_clientdata(client); - long val; + unsigned long val; int diff, hyst; int err; int ret = count; @@ -380,14 +382,14 @@ static ssize_t show_alarm(struct device *dev, static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL); -static DEVICE_ATTR(temp1_crit, S_IWUSR | S_IRUGO, +static DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp_crit, set_temp_crit); -static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, +static DEVICE_ATTR(temp1_min, S_IRUGO, show_temp_min, set_temp_min); -static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, +static DEVICE_ATTR(temp1_max, S_IRUGO, show_temp_max, set_temp_max); -static DEVICE_ATTR(temp1_crit_hyst, S_IWUSR | S_IRUGO, +static DEVICE_ATTR(temp1_crit_hyst, S_IRUGO, show_temp_crit_hyst, set_temp_crit_hyst); static DEVICE_ATTR(temp1_max_hyst, S_IRUGO, show_temp_max_hyst, NULL); @@ -412,8 +414,31 @@ static struct attribute *jc42_attributes[] = { NULL }; +static mode_t jc42_attribute_mode(struct kobject *kobj, + struct attribute *attr, int index) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct i2c_client *client = to_i2c_client(dev); + struct jc42_data *data = i2c_get_clientdata(client); + unsigned int config = data->config; + bool readonly; + + if (attr == &dev_attr_temp1_crit.attr) + readonly = config & JC42_CFG_TCRIT_LOCK; + else if (attr == &dev_attr_temp1_min.attr || + attr == &dev_attr_temp1_max.attr) + readonly = config & JC42_CFG_EVENT_LOCK; + else if (attr == &dev_attr_temp1_crit_hyst.attr) + readonly = config & (JC42_CFG_EVENT_LOCK | JC42_CFG_TCRIT_LOCK); + else + readonly = true; + + return S_IRUGO | (readonly ? 0 : S_IWUSR); +} + static const struct attribute_group jc42_group = { .attrs = jc42_attributes, + .is_visible = jc42_attribute_mode, }; /* Return 0 if detection is successful, -ENODEV otherwise */ diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c index da5a240..82bf65a 100644 --- a/drivers/hwmon/k10temp.c +++ b/drivers/hwmon/k10temp.c @@ -1,5 +1,5 @@ /* - * k10temp.c - AMD Family 10h/11h processor hardware monitoring + * k10temp.c - AMD Family 10h/11h/12h/14h processor hardware monitoring * * Copyright (c) 2009 Clemens Ladisch <clemens@ladisch.de> * @@ -25,7 +25,7 @@ #include <linux/pci.h> #include <asm/processor.h> -MODULE_DESCRIPTION("AMD Family 10h/11h CPU core temperature monitor"); +MODULE_DESCRIPTION("AMD Family 10h/11h/12h/14h CPU core temperature monitor"); MODULE_AUTHOR("Clemens Ladisch <clemens@ladisch.de>"); MODULE_LICENSE("GPL"); @@ -208,6 +208,7 @@ static void __devexit k10temp_remove(struct pci_dev *pdev) static const struct pci_device_id k10temp_id_table[] = { { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) }, { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CNB17H_F3) }, {} }; MODULE_DEVICE_TABLE(pci, k10temp_id_table); diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index 1e22984..d2cc286 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -41,7 +41,7 @@ static const unsigned short normal_i2c[] = { 0x2c, 0x2d, 0x2e, I2C_CLIENT_END }; enum chips { any_chip, lm85b, lm85c, adm1027, adt7463, adt7468, - emc6d100, emc6d102 + emc6d100, emc6d102, emc6d103 }; /* The LM85 registers */ @@ -90,6 +90,9 @@ enum chips { #define LM85_VERSTEP_EMC6D100_A0 0x60 #define LM85_VERSTEP_EMC6D100_A1 0x61 #define LM85_VERSTEP_EMC6D102 0x65 +#define LM85_VERSTEP_EMC6D103_A0 0x68 +#define LM85_VERSTEP_EMC6D103_A1 0x69 +#define LM85_VERSTEP_EMC6D103S 0x6A /* Also known as EMC6D103:A2 */ #define LM85_REG_CONFIG 0x40 @@ -348,6 +351,7 @@ static const struct i2c_device_id lm85_id[] = { { "emc6d100", emc6d100 }, { "emc6d101", emc6d100 }, { "emc6d102", emc6d102 }, + { "emc6d103", emc6d103 }, { } }; MODULE_DEVICE_TABLE(i2c, lm85_id); @@ -1250,6 +1254,20 @@ static int lm85_detect(struct i2c_client *client, struct i2c_board_info *info) case LM85_VERSTEP_EMC6D102: type_name = "emc6d102"; break; + case LM85_VERSTEP_EMC6D103_A0: + case LM85_VERSTEP_EMC6D103_A1: + type_name = "emc6d103"; + break; + /* + * Registers apparently missing in EMC6D103S/EMC6D103:A2 + * compared to EMC6D103:A0, EMC6D103:A1, and EMC6D102 + * (according to the data sheets), but used unconditionally + * in the driver: 62[5:7], 6D[0:7], and 6E[0:7]. + * So skip EMC6D103S for now. + case LM85_VERSTEP_EMC6D103S: + type_name = "emc6d103s"; + break; + */ } } else { dev_dbg(&adapter->dev, @@ -1283,6 +1301,7 @@ static int lm85_probe(struct i2c_client *client, case adt7468: case emc6d100: case emc6d102: + case emc6d103: data->freq_map = adm1027_freq_map; break; default: @@ -1468,7 +1487,7 @@ static struct lm85_data *lm85_update_device(struct device *dev) /* More alarm bits */ data->alarms |= lm85_read_value(client, EMC6D100_REG_ALARM3) << 16; - } else if (data->type == emc6d102) { + } else if (data->type == emc6d102 || data->type == emc6d103) { /* Have to read LSB bits after the MSB ones because the reading of the MSB bits has frozen the LSBs (backward from the ADM1027). diff --git a/drivers/hwmon/ultra45_env.c b/drivers/hwmon/ultra45_env.c index d863e13..1f36c63 100644 --- a/drivers/hwmon/ultra45_env.c +++ b/drivers/hwmon/ultra45_env.c @@ -234,8 +234,7 @@ static const struct attribute_group env_group = { .attrs = env_attributes, }; -static int __devinit env_probe(struct platform_device *op, - const struct of_device_id *match) +static int __devinit env_probe(struct platform_device *op) { struct env *p = kzalloc(sizeof(*p), GFP_KERNEL); int err = -ENOMEM; @@ -299,7 +298,7 @@ static const struct of_device_id env_match[] = { }; MODULE_DEVICE_TABLE(of, env_match); -static struct of_platform_driver env_driver = { +static struct platform_driver env_driver = { .driver = { .name = "ultra45_env", .owner = THIS_MODULE, @@ -311,12 +310,12 @@ static struct of_platform_driver env_driver = { static int __init env_init(void) { - return of_register_platform_driver(&env_driver); + return platform_driver_register(&env_driver); } static void __exit env_exit(void) { - of_unregister_platform_driver(&env_driver); + platform_driver_unregister(&env_driver); } module_init(env_init); |