summaryrefslogtreecommitdiff
path: root/drivers/i2c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/algos/i2c-algo-pca.c6
-rw-r--r--drivers/i2c/busses/Kconfig6
-rw-r--r--drivers/i2c/busses/Makefile5
-rw-r--r--drivers/i2c/busses/i2c-designware-core.c11
-rw-r--r--drivers/i2c/busses/i2c-diolan-u2c.c1
-rw-r--r--drivers/i2c/busses/i2c-i801.c3
-rw-r--r--drivers/i2c/busses/i2c-mxs.c13
-rw-r--r--drivers/i2c/busses/i2c-nomadik.c28
-rw-r--r--drivers/i2c/busses/i2c-omap.c2
-rw-r--r--drivers/i2c/busses/i2c-pnx.c53
-rw-r--r--drivers/i2c/busses/i2c-tegra.c2
-rw-r--r--drivers/i2c/i2c-core.c22
12 files changed, 104 insertions, 48 deletions
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index 73133b1..6f5f98d 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -476,17 +476,17 @@ static int pca_init(struct i2c_adapter *adap)
/* To avoid integer overflow, use clock/100 for calculations */
clock = pca_clock(pca_data) / 100;
- if (pca_data->i2c_clock > 10000) {
+ if (pca_data->i2c_clock > 1000000) {
mode = I2C_PCA_MODE_TURBO;
min_tlow = 14;
min_thi = 5;
raise_fall_time = 22; /* Raise 11e-8s, Fall 11e-8s */
- } else if (pca_data->i2c_clock > 4000) {
+ } else if (pca_data->i2c_clock > 400000) {
mode = I2C_PCA_MODE_FASTP;
min_tlow = 17;
min_thi = 9;
raise_fall_time = 22; /* Raise 11e-8s, Fall 11e-8s */
- } else if (pca_data->i2c_clock > 1000) {
+ } else if (pca_data->i2c_clock > 100000) {
mode = I2C_PCA_MODE_FAST;
min_tlow = 44;
min_thi = 20;
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index b4aaa1b..970a161 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -104,6 +104,7 @@ config I2C_I801
DH89xxCC (PCH)
Panther Point (PCH)
Lynx Point (PCH)
+ Lynx Point-LP (PCH)
This driver can also be built as a module. If so, the module
will be called i2c-i801.
@@ -354,9 +355,13 @@ config I2C_DAVINCI
devices such as DaVinci NIC.
For details please see http://www.ti.com/davinci
+config I2C_DESIGNWARE_CORE
+ tristate
+
config I2C_DESIGNWARE_PLATFORM
tristate "Synopsys DesignWare Platform"
depends on HAVE_CLK
+ select I2C_DESIGNWARE_CORE
help
If you say yes to this option, support will be included for the
Synopsys DesignWare I2C adapter. Only master mode is supported.
@@ -367,6 +372,7 @@ config I2C_DESIGNWARE_PLATFORM
config I2C_DESIGNWARE_PCI
tristate "Synopsys DesignWare PCI"
depends on PCI
+ select I2C_DESIGNWARE_CORE
help
If you say yes to this option, support will be included for the
Synopsys DesignWare I2C adapter. Only master mode is supported.
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index ce3c2be..37c4182 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -33,10 +33,11 @@ obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o
obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o
obj-$(CONFIG_I2C_CPM) += i2c-cpm.o
obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o
+obj-$(CONFIG_I2C_DESIGNWARE_CORE) += i2c-designware-core.o
obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM) += i2c-designware-platform.o
-i2c-designware-platform-objs := i2c-designware-platdrv.o i2c-designware-core.o
+i2c-designware-platform-objs := i2c-designware-platdrv.o
obj-$(CONFIG_I2C_DESIGNWARE_PCI) += i2c-designware-pci.o
-i2c-designware-pci-objs := i2c-designware-pcidrv.o i2c-designware-core.o
+i2c-designware-pci-objs := i2c-designware-pcidrv.o
obj-$(CONFIG_I2C_EG20T) += i2c-eg20t.o
obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o
obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index 1e48bec..7b8ebbe 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -25,6 +25,7 @@
* ----------------------------------------------------------------------------
*
*/
+#include <linux/export.h>
#include <linux/clk.h>
#include <linux/errno.h>
#include <linux/err.h>
@@ -316,6 +317,7 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
dw_writel(dev, dev->master_cfg , DW_IC_CON);
return 0;
}
+EXPORT_SYMBOL_GPL(i2c_dw_init);
/*
* Waiting for bus not busy
@@ -568,12 +570,14 @@ done:
return ret;
}
+EXPORT_SYMBOL_GPL(i2c_dw_xfer);
u32 i2c_dw_func(struct i2c_adapter *adap)
{
struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
return dev->functionality;
}
+EXPORT_SYMBOL_GPL(i2c_dw_func);
static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev)
{
@@ -678,17 +682,20 @@ tx_aborted:
return IRQ_HANDLED;
}
+EXPORT_SYMBOL_GPL(i2c_dw_isr);
void i2c_dw_enable(struct dw_i2c_dev *dev)
{
/* Enable the adapter */
dw_writel(dev, 1, DW_IC_ENABLE);
}
+EXPORT_SYMBOL_GPL(i2c_dw_enable);
u32 i2c_dw_is_enabled(struct dw_i2c_dev *dev)
{
return dw_readl(dev, DW_IC_ENABLE);
}
+EXPORT_SYMBOL_GPL(i2c_dw_is_enabled);
void i2c_dw_disable(struct dw_i2c_dev *dev)
{
@@ -699,18 +706,22 @@ void i2c_dw_disable(struct dw_i2c_dev *dev)
dw_writel(dev, 0, DW_IC_INTR_MASK);
dw_readl(dev, DW_IC_CLR_INTR);
}
+EXPORT_SYMBOL_GPL(i2c_dw_disable);
void i2c_dw_clear_int(struct dw_i2c_dev *dev)
{
dw_readl(dev, DW_IC_CLR_INTR);
}
+EXPORT_SYMBOL_GPL(i2c_dw_clear_int);
void i2c_dw_disable_int(struct dw_i2c_dev *dev)
{
dw_writel(dev, 0, DW_IC_INTR_MASK);
}
+EXPORT_SYMBOL_GPL(i2c_dw_disable_int);
u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev)
{
return dw_readl(dev, DW_IC_COMP_PARAM_1);
}
+EXPORT_SYMBOL_GPL(i2c_dw_read_comp_param);
diff --git a/drivers/i2c/busses/i2c-diolan-u2c.c b/drivers/i2c/busses/i2c-diolan-u2c.c
index aedb94f..dae3ddfe 100644
--- a/drivers/i2c/busses/i2c-diolan-u2c.c
+++ b/drivers/i2c/busses/i2c-diolan-u2c.c
@@ -405,6 +405,7 @@ static int diolan_usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs,
}
}
}
+ ret = num;
abort:
sret = diolan_i2c_stop(dev);
if (sret < 0 && ret >= 0)
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 898dcf9..33e9b0c 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -52,6 +52,7 @@
DH89xxCC (PCH) 0x2330 32 hard yes yes yes
Panther Point (PCH) 0x1e22 32 hard yes yes yes
Lynx Point (PCH) 0x8c22 32 hard yes yes yes
+ Lynx Point-LP (PCH) 0x9c22 32 hard yes yes yes
Features supported by this driver:
Software PEC no
@@ -155,6 +156,7 @@
#define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330
#define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30
#define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22
+#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22
struct i801_priv {
struct i2c_adapter adapter;
@@ -771,6 +773,7 @@ static DEFINE_PCI_DEVICE_TABLE(i801_ids) = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS) },
{ 0, }
};
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 088c5c1..51f05b8 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -365,10 +365,6 @@ static int mxs_i2c_get_ofdata(struct mxs_i2c_dev *i2c)
struct device_node *node = dev->of_node;
int ret;
- if (!node)
- return -EINVAL;
-
- i2c->speed = &mxs_i2c_95kHz_config;
ret = of_property_read_u32(node, "clock-frequency", &speed);
if (ret)
dev_warn(dev, "No I2C speed selected, using 100kHz\n");
@@ -419,10 +415,13 @@ static int __devinit mxs_i2c_probe(struct platform_device *pdev)
return err;
i2c->dev = dev;
+ i2c->speed = &mxs_i2c_95kHz_config;
- err = mxs_i2c_get_ofdata(i2c);
- if (err)
- return err;
+ if (dev->of_node) {
+ err = mxs_i2c_get_ofdata(i2c);
+ if (err)
+ return err;
+ }
platform_set_drvdata(pdev, i2c);
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
index 5e6f1ee..61b00ed 100644
--- a/drivers/i2c/busses/i2c-nomadik.c
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -350,10 +350,6 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
i2c_clk = clk_get_rate(dev->clk);
- /* fallback to std. mode if machine has not provided it */
- if (dev->cfg.clk_freq == 0)
- dev->cfg.clk_freq = 100000;
-
/*
* The spec says, in case of std. mode the divider is
* 2 whereas it is 3 for fast and fastplus mode of
@@ -911,20 +907,32 @@ static const struct i2c_algorithm nmk_i2c_algo = {
.functionality = nmk_i2c_functionality
};
+static struct nmk_i2c_controller u8500_i2c = {
+ /*
+ * Slave data setup time; 250ns, 100ns, and 10ns, which
+ * is 14, 6 and 2 respectively for a 48Mhz i2c clock.
+ */
+ .slsu = 0xe,
+ .tft = 1, /* Tx FIFO threshold */
+ .rft = 8, /* Rx FIFO threshold */
+ .clk_freq = 400000, /* fast mode operation */
+ .timeout = 200, /* Slave response timeout(ms) */
+ .sm = I2C_FREQ_MODE_FAST,
+};
+
static atomic_t adapter_id = ATOMIC_INIT(0);
static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
{
int ret = 0;
- struct nmk_i2c_controller *pdata =
- adev->dev.platform_data;
+ struct nmk_i2c_controller *pdata = adev->dev.platform_data;
struct nmk_i2c_dev *dev;
struct i2c_adapter *adap;
- if (!pdata) {
- dev_warn(&adev->dev, "no platform data\n");
- return -ENODEV;
- }
+ if (!pdata)
+ /* No i2c configuration found, using the default. */
+ pdata = &u8500_i2c;
+
dev = kzalloc(sizeof(struct nmk_i2c_dev), GFP_KERNEL);
if (!dev) {
dev_err(&adev->dev, "cannot allocate memory\n");
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 6849635..5d19a49 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -584,7 +584,7 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
r = pm_runtime_get_sync(dev->dev);
if (IS_ERR_VALUE(r))
- return r;
+ goto out;
r = omap_i2c_wait_for_bb(dev);
if (r < 0)
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 5d54416..8488bdd 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -48,8 +48,9 @@ enum {
mcntrl_afie = 0x00000002,
mcntrl_naie = 0x00000004,
mcntrl_drmie = 0x00000008,
- mcntrl_daie = 0x00000020,
- mcntrl_rffie = 0x00000040,
+ mcntrl_drsie = 0x00000010,
+ mcntrl_rffie = 0x00000020,
+ mcntrl_daie = 0x00000040,
mcntrl_tffie = 0x00000080,
mcntrl_reset = 0x00000100,
mcntrl_cdbmode = 0x00000400,
@@ -290,31 +291,37 @@ static int i2c_pnx_master_rcv(struct i2c_pnx_algo_data *alg_data)
* or we didn't 'ask' for it yet.
*/
if (ioread32(I2C_REG_STS(alg_data)) & mstatus_rfe) {
- dev_dbg(&alg_data->adapter.dev,
- "%s(): Write dummy data to fill Rx-fifo...\n",
- __func__);
+ /* 'Asking' is done asynchronously, e.g. dummy TX of several
+ * bytes is done before the first actual RX arrives in FIFO.
+ * Therefore, ordered bytes (via TX) are counted separately.
+ */
+ if (alg_data->mif.order) {
+ dev_dbg(&alg_data->adapter.dev,
+ "%s(): Write dummy data to fill Rx-fifo...\n",
+ __func__);
- if (alg_data->mif.len == 1) {
- /* Last byte, do not acknowledge next rcv. */
- val |= stop_bit;
+ if (alg_data->mif.order == 1) {
+ /* Last byte, do not acknowledge next rcv. */
+ val |= stop_bit;
+
+ /*
+ * Enable interrupt RFDAIE (data in Rx fifo),
+ * and disable DRMIE (need data for Tx)
+ */
+ ctl = ioread32(I2C_REG_CTL(alg_data));
+ ctl |= mcntrl_rffie | mcntrl_daie;
+ ctl &= ~mcntrl_drmie;
+ iowrite32(ctl, I2C_REG_CTL(alg_data));
+ }
/*
- * Enable interrupt RFDAIE (data in Rx fifo),
- * and disable DRMIE (need data for Tx)
+ * Now we'll 'ask' for data:
+ * For each byte we want to receive, we must
+ * write a (dummy) byte to the Tx-FIFO.
*/
- ctl = ioread32(I2C_REG_CTL(alg_data));
- ctl |= mcntrl_rffie | mcntrl_daie;
- ctl &= ~mcntrl_drmie;
- iowrite32(ctl, I2C_REG_CTL(alg_data));
+ iowrite32(val, I2C_REG_TX(alg_data));
+ alg_data->mif.order--;
}
-
- /*
- * Now we'll 'ask' for data:
- * For each byte we want to receive, we must
- * write a (dummy) byte to the Tx-FIFO.
- */
- iowrite32(val, I2C_REG_TX(alg_data));
-
return 0;
}
@@ -514,6 +521,7 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
alg_data->mif.buf = pmsg->buf;
alg_data->mif.len = pmsg->len;
+ alg_data->mif.order = pmsg->len;
alg_data->mif.mode = (pmsg->flags & I2C_M_RD) ?
I2C_SMBUS_READ : I2C_SMBUS_WRITE;
alg_data->mif.ret = 0;
@@ -566,6 +574,7 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
/* Cleanup to be sure... */
alg_data->mif.buf = NULL;
alg_data->mif.len = 0;
+ alg_data->mif.order = 0;
dev_dbg(&alg_data->adapter.dev, "%s(): exiting, stat = %x\n",
__func__, ioread32(I2C_REG_STS(alg_data)));
diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c
index 66eb53f..9a08c57 100644
--- a/drivers/i2c/busses/i2c-tegra.c
+++ b/drivers/i2c/busses/i2c-tegra.c
@@ -712,7 +712,7 @@ static int __devexit tegra_i2c_remove(struct platform_device *pdev)
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int tegra_i2c_suspend(struct device *dev)
{
struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 2efa56c..2091ae8f 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -637,6 +637,22 @@ static void i2c_adapter_dev_release(struct device *dev)
}
/*
+ * This function is only needed for mutex_lock_nested, so it is never
+ * called unless locking correctness checking is enabled. Thus we
+ * make it inline to avoid a compiler warning. That's what gcc ends up
+ * doing anyway.
+ */
+static inline unsigned int i2c_adapter_depth(struct i2c_adapter *adapter)
+{
+ unsigned int depth = 0;
+
+ while ((adapter = i2c_parent_is_i2c_adapter(adapter)))
+ depth++;
+
+ return depth;
+}
+
+/*
* Let users instantiate I2C devices through sysfs. This can be used when
* platform initialization code doesn't contain the proper data for
* whatever reason. Also useful for drivers that do device detection and
@@ -726,7 +742,8 @@ i2c_sysfs_delete_device(struct device *dev, struct device_attribute *attr,
/* Make sure the device was added through sysfs */
res = -ENOENT;
- mutex_lock(&adap->userspace_clients_lock);
+ mutex_lock_nested(&adap->userspace_clients_lock,
+ i2c_adapter_depth(adap));
list_for_each_entry_safe(client, next, &adap->userspace_clients,
detected) {
if (client->addr == addr) {
@@ -1073,7 +1090,8 @@ int i2c_del_adapter(struct i2c_adapter *adap)
return res;
/* Remove devices instantiated from sysfs */
- mutex_lock(&adap->userspace_clients_lock);
+ mutex_lock_nested(&adap->userspace_clients_lock,
+ i2c_adapter_depth(adap));
list_for_each_entry_safe(client, next, &adap->userspace_clients,
detected) {
dev_dbg(&adap->dev, "Removing %s at 0x%x\n", client->name,
generated by cgit v0.10.2 at 2024-11-12 01:26:44 (GMT)