summaryrefslogtreecommitdiff
path: root/drivers/i2c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/Kconfig1
-rw-r--r--drivers/i2c/busses/Kconfig12
-rw-r--r--drivers/i2c/busses/i2c-designware-core.c81
-rw-r--r--drivers/i2c/busses/i2c-digicolor.c3
-rw-r--r--drivers/i2c/busses/i2c-i801.c16
-rw-r--r--drivers/i2c/busses/i2c-imx.c11
-rw-r--r--drivers/i2c/busses/i2c-jz4780.c1
-rw-r--r--drivers/i2c/busses/i2c-octeon-core.c4
-rw-r--r--drivers/i2c/busses/i2c-octeon-core.h27
-rw-r--r--drivers/i2c/busses/i2c-rk3x.c2
-rw-r--r--drivers/i2c/busses/i2c-xgene-slimpro.c2
-rw-r--r--drivers/i2c/busses/i2c-xlp9xx.c1
-rw-r--r--drivers/i2c/busses/i2c-xlr.c1
-rw-r--r--drivers/i2c/i2c-core.c13
-rw-r--r--drivers/i2c/muxes/Kconfig1
-rw-r--r--drivers/i2c/muxes/i2c-demux-pinctrl.c22
-rw-r--r--drivers/i2c/muxes/i2c-mux-pca954x.c4
17 files changed, 119 insertions, 83 deletions
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index d223650..11edabf 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -59,7 +59,6 @@ config I2C_CHARDEV
config I2C_MUX
tristate "I2C bus multiplexing support"
- depends on HAS_IOMEM
help
Say Y here if you want the I2C core to support the ability to
handle multiplexed I2C bus topologies, by presenting each
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 6d94e2e..d252276 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -79,12 +79,12 @@ config I2C_AMD8111
config I2C_HIX5HD2
tristate "Hix5hd2 high-speed I2C driver"
- depends on ARCH_HIX5HD2 || COMPILE_TEST
+ depends on ARCH_HISI || ARCH_HIX5HD2 || COMPILE_TEST
help
- Say Y here to include support for high-speed I2C controller in the
- Hisilicon based hix5hd2 SoCs.
+ Say Y here to include support for the high-speed I2C controller
+ used in HiSilicon hix5hd2 SoCs.
- This driver can also be built as a module. If so, the module
+ This driver can also be built as a module. If so, the module
will be called i2c-hix5hd2.
config I2C_I801
@@ -589,10 +589,10 @@ config I2C_IMG
config I2C_IMX
tristate "IMX I2C interface"
- depends on ARCH_MXC || ARCH_LAYERSCAPE
+ depends on ARCH_MXC || ARCH_LAYERSCAPE || COLDFIRE
help
Say Y here if you want to use the IIC bus controller on
- the Freescale i.MX/MXC or Layerscape processors.
+ the Freescale i.MX/MXC, Layerscape or ColdFire processors.
This driver can also be built as a module. If so, the module
will be called i2c-imx.
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c
index 1fe93c4..b403fa5 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-core.c
@@ -91,9 +91,10 @@
DW_IC_INTR_TX_ABRT | \
DW_IC_INTR_STOP_DET)
-#define DW_IC_STATUS_ACTIVITY 0x1
-#define DW_IC_STATUS_TFE BIT(2)
-#define DW_IC_STATUS_MST_ACTIVITY BIT(5)
+#define DW_IC_STATUS_ACTIVITY 0x1
+
+#define DW_IC_SDA_HOLD_RX_SHIFT 16
+#define DW_IC_SDA_HOLD_RX_MASK GENMASK(23, DW_IC_SDA_HOLD_RX_SHIFT)
#define DW_IC_ERR_TX_ABRT 0x1
@@ -420,12 +421,20 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
/* Configure SDA Hold Time if required */
reg = dw_readl(dev, DW_IC_COMP_VERSION);
if (reg >= DW_IC_SDA_HOLD_MIN_VERS) {
- if (dev->sda_hold_time) {
- dw_writel(dev, dev->sda_hold_time, DW_IC_SDA_HOLD);
- } else {
+ if (!dev->sda_hold_time) {
/* Keep previous hold time setting if no one set it */
dev->sda_hold_time = dw_readl(dev, DW_IC_SDA_HOLD);
}
+ /*
+ * Workaround for avoiding TX arbitration lost in case I2C
+ * slave pulls SDA down "too quickly" after falling egde of
+ * SCL by enabling non-zero SDA RX hold. Specification says it
+ * extends incoming SDA low to high transition while SCL is
+ * high but it apprears to help also above issue.
+ */
+ if (!(dev->sda_hold_time & DW_IC_SDA_HOLD_RX_MASK))
+ dev->sda_hold_time |= 1 << DW_IC_SDA_HOLD_RX_SHIFT;
+ dw_writel(dev, dev->sda_hold_time, DW_IC_SDA_HOLD);
} else {
dev_warn(dev->dev,
"Hardware too old to adjust SDA hold time.\n");
@@ -467,25 +476,9 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
{
struct i2c_msg *msgs = dev->msgs;
u32 ic_tar = 0;
- bool enabled;
-
- enabled = dw_readl(dev, DW_IC_ENABLE_STATUS) & 1;
-
- if (enabled) {
- u32 ic_status;
- /*
- * Only disable adapter if ic_tar and ic_con can't be
- * dynamically updated
- */
- ic_status = dw_readl(dev, DW_IC_STATUS);
- if (!dev->dynamic_tar_update_enabled ||
- (ic_status & DW_IC_STATUS_MST_ACTIVITY) ||
- !(ic_status & DW_IC_STATUS_TFE)) {
- __i2c_dw_enable_and_wait(dev, false);
- enabled = false;
- }
- }
+ /* Disable the adapter */
+ __i2c_dw_enable_and_wait(dev, false);
/* if the slave address is ten bit address, enable 10BITADDR */
if (dev->dynamic_tar_update_enabled) {
@@ -515,8 +508,8 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
/* enforce disabled interrupts (due to HW issues) */
i2c_dw_disable_int(dev);
- if (!enabled)
- __i2c_dw_enable(dev, true);
+ /* Enable the adapter */
+ __i2c_dw_enable(dev, true);
/* Clear and enable interrupts */
dw_readl(dev, DW_IC_CLR_INTR);
@@ -600,7 +593,7 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
if (msgs[dev->msg_write_idx].flags & I2C_M_RD) {
/* avoid rx buffer overrun */
- if (rx_limit - dev->rx_outstanding <= 0)
+ if (dev->rx_outstanding >= dev->rx_fifo_depth)
break;
dw_writel(dev, cmd | 0x100, DW_IC_DATA_CMD);
@@ -697,8 +690,7 @@ static int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev)
}
/*
- * Prepare controller for a transaction and start transfer by calling
- * i2c_dw_xfer_init()
+ * Prepare controller for a transaction and call i2c_dw_xfer_msg
*/
static int
i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
@@ -741,13 +733,23 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
goto done;
}
+ /*
+ * We must disable the adapter before returning and signaling the end
+ * of the current transfer. Otherwise the hardware might continue
+ * generating interrupts which in turn causes a race condition with
+ * the following transfer. Needs some more investigation if the
+ * additional interrupts are a hardware bug or this driver doesn't
+ * handle them correctly yet.
+ */
+ __i2c_dw_enable(dev, false);
+
if (dev->msg_err) {
ret = dev->msg_err;
goto done;
}
/* no error */
- if (likely(!dev->cmd_err)) {
+ if (likely(!dev->cmd_err && !dev->status)) {
ret = num;
goto done;
}
@@ -757,6 +759,11 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
ret = i2c_dw_handle_tx_abort(dev);
goto done;
}
+
+ if (dev->status)
+ dev_err(dev->dev,
+ "transfer terminated early - interrupt latency too high?\n");
+
ret = -EIO;
done:
@@ -877,19 +884,9 @@ static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
*/
tx_aborted:
- if ((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET))
- || dev->msg_err) {
- /*
- * We must disable interruts before returning and signaling
- * the end of the current transfer. Otherwise the hardware
- * might continue generating interrupts for non-existent
- * transfers.
- */
- i2c_dw_disable_int(dev);
- dw_readl(dev, DW_IC_CLR_INTR);
-
+ if ((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET)) || dev->msg_err)
complete(&dev->cmd_complete);
- } else if (unlikely(dev->accessor_flags & ACCESS_INTR_MASK)) {
+ else if (unlikely(dev->accessor_flags & ACCESS_INTR_MASK)) {
/* workaround to trigger pending interrupt */
stat = dw_readl(dev, DW_IC_INTR_MASK);
i2c_dw_disable_int(dev);
diff --git a/drivers/i2c/busses/i2c-digicolor.c b/drivers/i2c/busses/i2c-digicolor.c
index 9604024..50813a2 100644
--- a/drivers/i2c/busses/i2c-digicolor.c
+++ b/drivers/i2c/busses/i2c-digicolor.c
@@ -347,7 +347,7 @@ static int dc_i2c_probe(struct platform_device *pdev)
ret = i2c_add_adapter(&i2c->adap);
if (ret < 0) {
- clk_unprepare(i2c->clk);
+ clk_disable_unprepare(i2c->clk);
return ret;
}
@@ -368,6 +368,7 @@ static const struct of_device_id dc_i2c_match[] = {
{ .compatible = "cnxt,cx92755-i2c" },
{ },
};
+MODULE_DEVICE_TABLE(of, dc_i2c_match);
static struct platform_driver dc_i2c_driver = {
.probe = dc_i2c_probe,
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 08847e8..eb3627f 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -146,6 +146,7 @@
#define SMBHSTCFG_HST_EN 1
#define SMBHSTCFG_SMB_SMI_EN 2
#define SMBHSTCFG_I2C_EN 4
+#define SMBHSTCFG_SPD_WD 0x10
/* TCO configuration bits for TCOCTL */
#define TCOCTL_EN 0x0100
@@ -865,9 +866,16 @@ static s32 i801_access(struct i2c_adapter *adap, u16 addr,
block = 1;
break;
case I2C_SMBUS_I2C_BLOCK_DATA:
- /* NB: page 240 of ICH5 datasheet shows that the R/#W
- * bit should be cleared here, even when reading */
- outb_p((addr & 0x7f) << 1, SMBHSTADD(priv));
+ /*
+ * NB: page 240 of ICH5 datasheet shows that the R/#W
+ * bit should be cleared here, even when reading.
+ * However if SPD Write Disable is set (Lynx Point and later),
+ * the read will fail if we don't set the R/#W bit.
+ */
+ outb_p(((addr & 0x7f) << 1) |
+ ((priv->original_hstcfg & SMBHSTCFG_SPD_WD) ?
+ (read_write & 0x01) : 0),
+ SMBHSTADD(priv));
if (read_write == I2C_SMBUS_READ) {
/* NB: page 240 of ICH5 datasheet also shows
* that DATA1 is the cmd field when reading */
@@ -1573,6 +1581,8 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
/* Disable SMBus interrupt feature if SMBus using SMI# */
priv->features &= ~FEATURE_IRQ;
}
+ if (temp & SMBHSTCFG_SPD_WD)
+ dev_info(&dev->dev, "SPD Write Disable is set\n");
/* Clear special mode bits */
if (priv->features & (FEATURE_SMBUS_PEC | FEATURE_BLOCK_BUFFER))
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 592a8f2..47fc1f1 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -1009,10 +1009,13 @@ static int i2c_imx_init_recovery_info(struct imx_i2c_struct *i2c_imx,
rinfo->sda_gpio = of_get_named_gpio(pdev->dev.of_node, "sda-gpios", 0);
rinfo->scl_gpio = of_get_named_gpio(pdev->dev.of_node, "scl-gpios", 0);
- if (!gpio_is_valid(rinfo->sda_gpio) ||
- !gpio_is_valid(rinfo->scl_gpio) ||
- IS_ERR(i2c_imx->pinctrl_pins_default) ||
- IS_ERR(i2c_imx->pinctrl_pins_gpio)) {
+ if (rinfo->sda_gpio == -EPROBE_DEFER ||
+ rinfo->scl_gpio == -EPROBE_DEFER) {
+ return -EPROBE_DEFER;
+ } else if (!gpio_is_valid(rinfo->sda_gpio) ||
+ !gpio_is_valid(rinfo->scl_gpio) ||
+ IS_ERR(i2c_imx->pinctrl_pins_default) ||
+ IS_ERR(i2c_imx->pinctrl_pins_gpio)) {
dev_dbg(&pdev->dev, "recovery information incomplete\n");
return 0;
}
diff --git a/drivers/i2c/busses/i2c-jz4780.c b/drivers/i2c/busses/i2c-jz4780.c
index b8ea621..30132c3 100644
--- a/drivers/i2c/busses/i2c-jz4780.c
+++ b/drivers/i2c/busses/i2c-jz4780.c
@@ -729,6 +729,7 @@ static const struct of_device_id jz4780_i2c_of_matches[] = {
{ .compatible = "ingenic,jz4780-i2c", },
{ /* sentinel */ }
};
+MODULE_DEVICE_TABLE(of, jz4780_i2c_of_matches);
static int jz4780_i2c_probe(struct platform_device *pdev)
{
diff --git a/drivers/i2c/busses/i2c-octeon-core.c b/drivers/i2c/busses/i2c-octeon-core.c
index 419b54b..5e63b17 100644
--- a/drivers/i2c/busses/i2c-octeon-core.c
+++ b/drivers/i2c/busses/i2c-octeon-core.c
@@ -381,9 +381,7 @@ static int octeon_i2c_read(struct octeon_i2c *i2c, int target,
if (result)
return result;
- data[i] = octeon_i2c_data_read(i2c, &result);
- if (result)
- return result;
+ data[i] = octeon_i2c_data_read(i2c);
if (recv_len && i == 0) {
if (data[i] > I2C_SMBUS_BLOCK_MAX + 1)
return -EPROTO;
diff --git a/drivers/i2c/busses/i2c-octeon-core.h b/drivers/i2c/busses/i2c-octeon-core.h
index 1db7c83..87151ea 100644
--- a/drivers/i2c/busses/i2c-octeon-core.h
+++ b/drivers/i2c/busses/i2c-octeon-core.h
@@ -5,7 +5,6 @@
#include <linux/i2c.h>
#include <linux/i2c-smbus.h>
#include <linux/io.h>
-#include <linux/iopoll.h>
#include <linux/kernel.h>
#include <linux/pci.h>
@@ -145,9 +144,9 @@ static inline void octeon_i2c_reg_write(struct octeon_i2c *i2c, u64 eop_reg, u8
u64 tmp;
__raw_writeq(SW_TWSI_V | eop_reg | data, i2c->twsi_base + SW_TWSI(i2c));
-
- readq_poll_timeout(i2c->twsi_base + SW_TWSI(i2c), tmp, tmp & SW_TWSI_V,
- I2C_OCTEON_EVENT_WAIT, i2c->adap.timeout);
+ do {
+ tmp = __raw_readq(i2c->twsi_base + SW_TWSI(i2c));
+ } while ((tmp & SW_TWSI_V) != 0);
}
#define octeon_i2c_ctl_write(i2c, val) \
@@ -164,28 +163,24 @@ static inline void octeon_i2c_reg_write(struct octeon_i2c *i2c, u64 eop_reg, u8
*
* The I2C core registers are accessed indirectly via the SW_TWSI CSR.
*/
-static inline int octeon_i2c_reg_read(struct octeon_i2c *i2c, u64 eop_reg,
- int *error)
+static inline u8 octeon_i2c_reg_read(struct octeon_i2c *i2c, u64 eop_reg)
{
u64 tmp;
- int ret;
__raw_writeq(SW_TWSI_V | eop_reg | SW_TWSI_R, i2c->twsi_base + SW_TWSI(i2c));
+ do {
+ tmp = __raw_readq(i2c->twsi_base + SW_TWSI(i2c));
+ } while ((tmp & SW_TWSI_V) != 0);
- ret = readq_poll_timeout(i2c->twsi_base + SW_TWSI(i2c), tmp,
- tmp & SW_TWSI_V, I2C_OCTEON_EVENT_WAIT,
- i2c->adap.timeout);
- if (error)
- *error = ret;
return tmp & 0xFF;
}
#define octeon_i2c_ctl_read(i2c) \
- octeon_i2c_reg_read(i2c, SW_TWSI_EOP_TWSI_CTL, NULL)
-#define octeon_i2c_data_read(i2c, error) \
- octeon_i2c_reg_read(i2c, SW_TWSI_EOP_TWSI_DATA, error)
+ octeon_i2c_reg_read(i2c, SW_TWSI_EOP_TWSI_CTL)
+#define octeon_i2c_data_read(i2c) \
+ octeon_i2c_reg_read(i2c, SW_TWSI_EOP_TWSI_DATA)
#define octeon_i2c_stat_read(i2c) \
- octeon_i2c_reg_read(i2c, SW_TWSI_EOP_TWSI_STAT, NULL)
+ octeon_i2c_reg_read(i2c, SW_TWSI_EOP_TWSI_STAT)
/**
* octeon_i2c_read_int - read the TWSI_INT register
diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c
index 50702c7..df22066 100644
--- a/drivers/i2c/busses/i2c-rk3x.c
+++ b/drivers/i2c/busses/i2c-rk3x.c
@@ -694,6 +694,8 @@ static int rk3x_i2c_v0_calc_timings(unsigned long clk_rate,
t_calc->div_low--;
t_calc->div_high--;
+ /* Give the tuning value 0, that would not update con register */
+ t_calc->tuning = 0;
/* Maximum divider supported by hw is 0xffff */
if (t_calc->div_low > 0xffff) {
t_calc->div_low = 0xffff;
diff --git a/drivers/i2c/busses/i2c-xgene-slimpro.c b/drivers/i2c/busses/i2c-xgene-slimpro.c
index 263685c..05cf192 100644
--- a/drivers/i2c/busses/i2c-xgene-slimpro.c
+++ b/drivers/i2c/busses/i2c-xgene-slimpro.c
@@ -105,7 +105,7 @@ struct slimpro_i2c_dev {
struct mbox_chan *mbox_chan;
struct mbox_client mbox_client;
struct completion rd_complete;
- u8 dma_buffer[I2C_SMBUS_BLOCK_MAX];
+ u8 dma_buffer[I2C_SMBUS_BLOCK_MAX + 1]; /* dma_buffer[0] is used for length */
u32 *resp_msg;
};
diff --git a/drivers/i2c/busses/i2c-xlp9xx.c b/drivers/i2c/busses/i2c-xlp9xx.c
index 2a972ed..e29ff37 100644
--- a/drivers/i2c/busses/i2c-xlp9xx.c
+++ b/drivers/i2c/busses/i2c-xlp9xx.c
@@ -426,6 +426,7 @@ static const struct of_device_id xlp9xx_i2c_of_match[] = {
{ .compatible = "netlogic,xlp980-i2c", },
{ /* sentinel */ },
};
+MODULE_DEVICE_TABLE(of, xlp9xx_i2c_of_match);
#ifdef CONFIG_ACPI
static const struct acpi_device_id xlp9xx_i2c_acpi_ids[] = {
diff --git a/drivers/i2c/busses/i2c-xlr.c b/drivers/i2c/busses/i2c-xlr.c
index 0968f59..ad17d88 100644
--- a/drivers/i2c/busses/i2c-xlr.c
+++ b/drivers/i2c/busses/i2c-xlr.c
@@ -358,6 +358,7 @@ static const struct of_device_id xlr_i2c_dt_ids[] = {
},
{ }
};
+MODULE_DEVICE_TABLE(of, xlr_i2c_dt_ids);
static int xlr_i2c_probe(struct platform_device *pdev)
{
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c
index 5ab6721..b432b64 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core.c
@@ -1681,6 +1681,7 @@ static struct i2c_client *of_i2c_register_device(struct i2c_adapter *adap,
static void of_i2c_register_devices(struct i2c_adapter *adap)
{
struct device_node *bus, *node;
+ struct i2c_client *client;
/* Only register child devices if the adapter has a node pointer set */
if (!adap->dev.of_node)
@@ -1695,7 +1696,14 @@ static void of_i2c_register_devices(struct i2c_adapter *adap)
for_each_available_child_of_node(bus, node) {
if (of_node_test_and_set_flag(node, OF_POPULATED))
continue;
- of_i2c_register_device(adap, node);
+
+ client = of_i2c_register_device(adap, node);
+ if (IS_ERR(client)) {
+ dev_warn(&adap->dev,
+ "Failed to create I2C device for %s\n",
+ node->full_name);
+ of_node_clear_flag(node, OF_POPULATED);
+ }
}
of_node_put(bus);
@@ -2171,6 +2179,7 @@ int i2c_register_driver(struct module *owner, struct i2c_driver *driver)
/* add the driver to the list of i2c drivers in the driver core */
driver->driver.owner = owner;
driver->driver.bus = &i2c_bus_type;
+ INIT_LIST_HEAD(&driver->clients);
/* When registration returns, the driver core
* will have called probe() for all matching-but-unbound devices.
@@ -2181,7 +2190,6 @@ int i2c_register_driver(struct module *owner, struct i2c_driver *driver)
pr_debug("driver [%s] registered\n", driver->driver.name);
- INIT_LIST_HEAD(&driver->clients);
/* Walk the adapters that are already present */
i2c_for_each_dev(driver, __process_new_driver);
@@ -2299,6 +2307,7 @@ static int of_i2c_notify(struct notifier_block *nb, unsigned long action,
if (IS_ERR(client)) {
dev_err(&adap->dev, "failed to create client for '%s'\n",
rd->dn->full_name);
+ of_node_clear_flag(rd->dn, OF_POPULATED);
return notifier_from_errno(PTR_ERR(client));
}
break;
diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig
index e280c8e..96de9ce 100644
--- a/drivers/i2c/muxes/Kconfig
+++ b/drivers/i2c/muxes/Kconfig
@@ -63,6 +63,7 @@ config I2C_MUX_PINCTRL
config I2C_MUX_REG
tristate "Register-based I2C multiplexer"
+ depends on HAS_IOMEM
help
If you say yes to this option, support will be included for a
register based I2C multiplexer. This driver provides access to
diff --git a/drivers/i2c/muxes/i2c-demux-pinctrl.c b/drivers/i2c/muxes/i2c-demux-pinctrl.c
index b3893f6..3e6fe17 100644
--- a/drivers/i2c/muxes/i2c-demux-pinctrl.c
+++ b/drivers/i2c/muxes/i2c-demux-pinctrl.c
@@ -69,10 +69,28 @@ static int i2c_demux_activate_master(struct i2c_demux_pinctrl_priv *priv, u32 ne
goto err_with_revert;
}
- p = devm_pinctrl_get_select(adap->dev.parent, priv->bus_name);
+ /*
+ * Check if there are pinctrl states at all. Note: we cant' use
+ * devm_pinctrl_get_select() because we need to distinguish between
+ * the -ENODEV from devm_pinctrl_get() and pinctrl_lookup_state().
+ */
+ p = devm_pinctrl_get(adap->dev.parent);
if (IS_ERR(p)) {
ret = PTR_ERR(p);
- goto err_with_put;
+ /* continue if just no pinctrl states (e.g. i2c-gpio), otherwise exit */
+ if (ret != -ENODEV)
+ goto err_with_put;
+ } else {
+ /* there are states. check and use them */
+ struct pinctrl_state *s = pinctrl_lookup_state(p, priv->bus_name);
+
+ if (IS_ERR(s)) {
+ ret = PTR_ERR(s);
+ goto err_with_put;
+ }
+ ret = pinctrl_select_state(p, s);
+ if (ret < 0)
+ goto err_with_put;
}
priv->chan[new_chan].parent_adap = adap;
diff --git a/drivers/i2c/muxes/i2c-mux-pca954x.c b/drivers/i2c/muxes/i2c-mux-pca954x.c
index 1091346..8bc3d36 100644
--- a/drivers/i2c/muxes/i2c-mux-pca954x.c
+++ b/drivers/i2c/muxes/i2c-mux-pca954x.c
@@ -268,9 +268,9 @@ static int pca954x_probe(struct i2c_client *client,
/* discard unconfigured channels */
break;
idle_disconnect_pd = pdata->modes[num].deselect_on_exit;
- data->deselect |= (idle_disconnect_pd
- || idle_disconnect_dt) << num;
}
+ data->deselect |= (idle_disconnect_pd ||
+ idle_disconnect_dt) << num;
ret = i2c_mux_add_adapter(muxc, force, num, class);
generated by cgit v0.10.2 at 2024-09-04 21:36:45 (GMT)