summaryrefslogtreecommitdiff
path: root/drivers/i2c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/busses/i2c-at91.c3
-rw-r--r--drivers/i2c/busses/i2c-brcmstb.c27
-rw-r--r--drivers/i2c/busses/i2c-designware-platdrv.c14
-rw-r--r--drivers/i2c/busses/i2c-ismt.c5
-rw-r--r--drivers/i2c/busses/i2c-meson.c2
-rw-r--r--drivers/i2c/busses/i2c-piix4.c30
-rw-r--r--drivers/i2c/busses/i2c-riic.c30
7 files changed, 91 insertions, 20 deletions
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index 0b86c61..c925a69 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -1180,6 +1180,7 @@ static int at91_twi_suspend_noirq(struct device *dev)
static int at91_twi_resume_noirq(struct device *dev)
{
+ struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
int ret;
if (!pm_runtime_status_suspended(dev)) {
@@ -1191,6 +1192,8 @@ static int at91_twi_resume_noirq(struct device *dev)
pm_runtime_mark_last_busy(dev);
pm_request_autosuspend(dev);
+ at91_init_twi_bus(twi_dev);
+
return 0;
}
diff --git a/drivers/i2c/busses/i2c-brcmstb.c b/drivers/i2c/busses/i2c-brcmstb.c
index 0652281..78792b4 100644
--- a/drivers/i2c/busses/i2c-brcmstb.c
+++ b/drivers/i2c/busses/i2c-brcmstb.c
@@ -465,6 +465,7 @@ static int brcmstb_i2c_xfer(struct i2c_adapter *adapter,
u8 *tmp_buf;
int len = 0;
int xfersz = brcmstb_i2c_get_xfersz(dev);
+ u32 cond, cond_per_msg;
if (dev->is_suspended)
return -EBUSY;
@@ -481,10 +482,11 @@ static int brcmstb_i2c_xfer(struct i2c_adapter *adapter,
pmsg->buf ? pmsg->buf[0] : '0', pmsg->len);
if (i < (num - 1) && (msgs[i + 1].flags & I2C_M_NOSTART))
- brcmstb_set_i2c_start_stop(dev, ~(COND_START_STOP));
+ cond = ~COND_START_STOP;
else
- brcmstb_set_i2c_start_stop(dev,
- COND_RESTART | COND_NOSTOP);
+ cond = COND_RESTART | COND_NOSTOP;
+
+ brcmstb_set_i2c_start_stop(dev, cond);
/* Send slave address */
if (!(pmsg->flags & I2C_M_NOSTART)) {
@@ -497,13 +499,24 @@ static int brcmstb_i2c_xfer(struct i2c_adapter *adapter,
}
}
+ cond_per_msg = cond;
+
/* Perform data transfer */
while (len) {
bytes_to_xfer = min(len, xfersz);
- if (len <= xfersz && i == (num - 1))
- brcmstb_set_i2c_start_stop(dev,
- ~(COND_START_STOP));
+ if (len <= xfersz) {
+ if (i == (num - 1))
+ cond_per_msg = cond_per_msg &
+ ~(COND_RESTART | COND_NOSTOP);
+ else
+ cond_per_msg = cond;
+ } else {
+ cond_per_msg = (cond_per_msg & ~COND_RESTART) |
+ COND_NOSTOP;
+ }
+
+ brcmstb_set_i2c_start_stop(dev, cond_per_msg);
rc = brcmstb_i2c_xfer_bsc_data(dev, tmp_buf,
bytes_to_xfer, pmsg);
@@ -512,6 +525,8 @@ static int brcmstb_i2c_xfer(struct i2c_adapter *adapter,
len -= bytes_to_xfer;
tmp_buf += bytes_to_xfer;
+
+ cond_per_msg = COND_NOSTART | COND_NOSTOP;
}
}
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 0b42a12..b42d95f 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -319,7 +319,7 @@ static void dw_i2c_plat_complete(struct device *dev)
#endif
#ifdef CONFIG_PM
-static int dw_i2c_plat_suspend(struct device *dev)
+static int dw_i2c_plat_runtime_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev);
@@ -343,11 +343,21 @@ static int dw_i2c_plat_resume(struct device *dev)
return 0;
}
+#ifdef CONFIG_PM_SLEEP
+static int dw_i2c_plat_suspend(struct device *dev)
+{
+ pm_runtime_resume(dev);
+ return dw_i2c_plat_runtime_suspend(dev);
+}
+#endif
+
static const struct dev_pm_ops dw_i2c_dev_pm_ops = {
.prepare = dw_i2c_plat_prepare,
.complete = dw_i2c_plat_complete,
SET_SYSTEM_SLEEP_PM_OPS(dw_i2c_plat_suspend, dw_i2c_plat_resume)
- SET_RUNTIME_PM_OPS(dw_i2c_plat_suspend, dw_i2c_plat_resume, NULL)
+ SET_RUNTIME_PM_OPS(dw_i2c_plat_runtime_suspend,
+ dw_i2c_plat_resume,
+ NULL)
};
#define DW_I2C_DEV_PMOPS (&dw_i2c_dev_pm_ops)
diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c
index f573448..7aea288 100644
--- a/drivers/i2c/busses/i2c-ismt.c
+++ b/drivers/i2c/busses/i2c-ismt.c
@@ -340,6 +340,11 @@ static int ismt_process_desc(const struct ismt_desc *desc,
data->word = dma_buffer[0] | (dma_buffer[1] << 8);
break;
case I2C_SMBUS_BLOCK_DATA:
+ if (desc->rxbytes != dma_buffer[0] + 1)
+ return -EMSGSIZE;
+
+ memcpy(data->block, dma_buffer, desc->rxbytes);
+ break;
case I2C_SMBUS_I2C_BLOCK_DATA:
memcpy(&data->block[1], dma_buffer, desc->rxbytes);
data->block[0] = desc->rxbytes;
diff --git a/drivers/i2c/busses/i2c-meson.c b/drivers/i2c/busses/i2c-meson.c
index 2aa61bb..73b97c7 100644
--- a/drivers/i2c/busses/i2c-meson.c
+++ b/drivers/i2c/busses/i2c-meson.c
@@ -175,7 +175,7 @@ static void meson_i2c_put_data(struct meson_i2c *i2c, char *buf, int len)
wdata1 |= *buf++ << ((i - 4) * 8);
writel(wdata0, i2c->regs + REG_TOK_WDATA0);
- writel(wdata0, i2c->regs + REG_TOK_WDATA1);
+ writel(wdata1, i2c->regs + REG_TOK_WDATA1);
dev_dbg(i2c->dev, "%s: data %08x %08x len %d\n", __func__,
wdata0, wdata1, len);
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index c21ca7b..8f1c5f2 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -94,6 +94,12 @@
#define SB800_PIIX4_PORT_IDX_ALT 0x2e
#define SB800_PIIX4_PORT_IDX_SEL 0x2f
#define SB800_PIIX4_PORT_IDX_MASK 0x06
+#define SB800_PIIX4_PORT_IDX_SHIFT 1
+
+/* On kerncz, SmBus0Sel is at bit 20:19 of PMx00 DecodeEn */
+#define SB800_PIIX4_PORT_IDX_KERNCZ 0x02
+#define SB800_PIIX4_PORT_IDX_MASK_KERNCZ 0x18
+#define SB800_PIIX4_PORT_IDX_SHIFT_KERNCZ 3
/* insmod parameters */
@@ -149,6 +155,8 @@ static const struct dmi_system_id piix4_dmi_ibm[] = {
*/
static DEFINE_MUTEX(piix4_mutex_sb800);
static u8 piix4_port_sel_sb800;
+static u8 piix4_port_mask_sb800;
+static u8 piix4_port_shift_sb800;
static const char *piix4_main_port_names_sb800[PIIX4_MAX_ADAPTERS] = {
" port 0", " port 2", " port 3", " port 4"
};
@@ -347,7 +355,19 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
/* Find which register is used for port selection */
if (PIIX4_dev->vendor == PCI_VENDOR_ID_AMD) {
- piix4_port_sel_sb800 = SB800_PIIX4_PORT_IDX_ALT;
+ switch (PIIX4_dev->device) {
+ case PCI_DEVICE_ID_AMD_KERNCZ_SMBUS:
+ piix4_port_sel_sb800 = SB800_PIIX4_PORT_IDX_KERNCZ;
+ piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK_KERNCZ;
+ piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT_KERNCZ;
+ break;
+ case PCI_DEVICE_ID_AMD_HUDSON2_SMBUS:
+ default:
+ piix4_port_sel_sb800 = SB800_PIIX4_PORT_IDX_ALT;
+ piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK;
+ piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT;
+ break;
+ }
} else {
mutex_lock(&piix4_mutex_sb800);
outb_p(SB800_PIIX4_PORT_IDX_SEL, SB800_PIIX4_SMB_IDX);
@@ -355,6 +375,8 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
piix4_port_sel_sb800 = (port_sel & 0x01) ?
SB800_PIIX4_PORT_IDX_ALT :
SB800_PIIX4_PORT_IDX;
+ piix4_port_mask_sb800 = SB800_PIIX4_PORT_IDX_MASK;
+ piix4_port_shift_sb800 = SB800_PIIX4_PORT_IDX_SHIFT;
mutex_unlock(&piix4_mutex_sb800);
}
@@ -616,8 +638,8 @@ static s32 piix4_access_sb800(struct i2c_adapter *adap, u16 addr,
smba_en_lo = inb_p(SB800_PIIX4_SMB_IDX + 1);
port = adapdata->port;
- if ((smba_en_lo & SB800_PIIX4_PORT_IDX_MASK) != port)
- outb_p((smba_en_lo & ~SB800_PIIX4_PORT_IDX_MASK) | port,
+ if ((smba_en_lo & piix4_port_mask_sb800) != port)
+ outb_p((smba_en_lo & ~piix4_port_mask_sb800) | port,
SB800_PIIX4_SMB_IDX + 1);
retval = piix4_access(adap, addr, flags, read_write,
@@ -706,7 +728,7 @@ static int piix4_add_adapter(struct pci_dev *dev, unsigned short smba,
adapdata->smba = smba;
adapdata->sb800_main = sb800_main;
- adapdata->port = port << 1;
+ adapdata->port = port << piix4_port_shift_sb800;
/* set up the sysfs linkage to our parent device */
adap->dev.parent = &dev->dev;
diff --git a/drivers/i2c/busses/i2c-riic.c b/drivers/i2c/busses/i2c-riic.c
index 6263ea8..8f11d34 100644
--- a/drivers/i2c/busses/i2c-riic.c
+++ b/drivers/i2c/busses/i2c-riic.c
@@ -80,6 +80,7 @@
#define ICIER_TEIE 0x40
#define ICIER_RIE 0x20
#define ICIER_NAKIE 0x10
+#define ICIER_SPIE 0x08
#define ICSR2_NACKF 0x10
@@ -216,11 +217,10 @@ static irqreturn_t riic_tend_isr(int irq, void *data)
return IRQ_NONE;
}
- if (riic->is_last || riic->err)
+ if (riic->is_last || riic->err) {
+ riic_clear_set_bit(riic, 0, ICIER_SPIE, RIIC_ICIER);
writeb(ICCR2_SP, riic->base + RIIC_ICCR2);
-
- writeb(0, riic->base + RIIC_ICIER);
- complete(&riic->msg_done);
+ }
return IRQ_HANDLED;
}
@@ -240,13 +240,13 @@ static irqreturn_t riic_rdrf_isr(int irq, void *data)
if (riic->bytes_left == 1) {
/* STOP must come before we set ACKBT! */
- if (riic->is_last)
+ if (riic->is_last) {
+ riic_clear_set_bit(riic, 0, ICIER_SPIE, RIIC_ICIER);
writeb(ICCR2_SP, riic->base + RIIC_ICCR2);
+ }
riic_clear_set_bit(riic, 0, ICMR3_ACKBT, RIIC_ICMR3);
- writeb(0, riic->base + RIIC_ICIER);
- complete(&riic->msg_done);
} else {
riic_clear_set_bit(riic, ICMR3_ACKBT, 0, RIIC_ICMR3);
}
@@ -259,6 +259,21 @@ static irqreturn_t riic_rdrf_isr(int irq, void *data)
return IRQ_HANDLED;
}
+static irqreturn_t riic_stop_isr(int irq, void *data)
+{
+ struct riic_dev *riic = data;
+
+ /* read back registers to confirm writes have fully propagated */
+ writeb(0, riic->base + RIIC_ICSR2);
+ readb(riic->base + RIIC_ICSR2);
+ writeb(0, riic->base + RIIC_ICIER);
+ readb(riic->base + RIIC_ICIER);
+
+ complete(&riic->msg_done);
+
+ return IRQ_HANDLED;
+}
+
static u32 riic_func(struct i2c_adapter *adap)
{
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
@@ -326,6 +341,7 @@ static struct riic_irq_desc riic_irqs[] = {
{ .res_num = 0, .isr = riic_tend_isr, .name = "riic-tend" },
{ .res_num = 1, .isr = riic_rdrf_isr, .name = "riic-rdrf" },
{ .res_num = 2, .isr = riic_tdre_isr, .name = "riic-tdre" },
+ { .res_num = 3, .isr = riic_stop_isr, .name = "riic-stop" },
{ .res_num = 5, .isr = riic_tend_isr, .name = "riic-nack" },
};
generated by cgit v0.10.2 at 2024-06-08 20:39:48 (GMT)