diff options
Diffstat (limited to 'drivers/i2c')
28 files changed, 1087 insertions, 167 deletions
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c index 525c734..7f0b832 100644 --- a/drivers/i2c/algos/i2c-algo-bit.c +++ b/drivers/i2c/algos/i2c-algo-bit.c @@ -15,7 +15,8 @@ You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + MA 02110-1301 USA. * ------------------------------------------------------------------------- */ /* With some changes from Frodo Looijaard <frodol@dds.nl>, Kyösti Mälkki @@ -103,9 +104,15 @@ static int sclhi(struct i2c_algo_bit_data *adap) * chips may hold it low ("clock stretching") while they * are processing data internally. */ - if (time_after(jiffies, start + adap->timeout)) + if (time_after(jiffies, start + adap->timeout)) { + /* Test one last time, as we may have been preempted + * between last check and timeout test. + */ + if (getscl(adap)) + break; return -ETIMEDOUT; - cond_resched(); + } + cpu_relax(); } #ifdef DEBUG if (jiffies != start && i2c_debug >= 3) @@ -610,10 +617,11 @@ static u32 bit_func(struct i2c_adapter *adap) /* -----exported algorithm data: ------------------------------------- */ -static const struct i2c_algorithm i2c_bit_algo = { +const struct i2c_algorithm i2c_bit_algo = { .master_xfer = bit_xfer, .functionality = bit_func, }; +EXPORT_SYMBOL(i2c_bit_algo); /* * registering functions to load algorithms at runtime diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c index beb9ffe..73133b1 100644 --- a/drivers/i2c/algos/i2c-algo-pca.c +++ b/drivers/i2c/algos/i2c-algo-pca.c @@ -15,7 +15,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA. */ #include <linux/kernel.h> diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c index 5eebf56..5c23795 100644 --- a/drivers/i2c/algos/i2c-algo-pcf.c +++ b/drivers/i2c/algos/i2c-algo-pcf.c @@ -16,7 +16,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA. * * With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and * Frodo Looijaard <frodol@dds.nl>, and also from Martin Bailey diff --git a/drivers/i2c/algos/i2c-algo-pcf.h b/drivers/i2c/algos/i2c-algo-pcf.h index 5263a9e..1ec703e 100644 --- a/drivers/i2c/algos/i2c-algo-pcf.h +++ b/drivers/i2c/algos/i2c-algo-pcf.h @@ -16,7 +16,8 @@ You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + MA 02110-1301 USA. */ /* -------------------------------------------------------------------- */ /* With some changes from Frodo Looijaard <frodol@dds.nl> */ diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 3101dd5..d2c5095 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -103,6 +103,7 @@ config I2C_I801 Patsburg (PCH) DH89xxCC (PCH) Panther Point (PCH) + Lynx Point (PCH) This driver can also be built as a module. If so, the module will be called i2c-i801. @@ -369,6 +370,21 @@ config I2C_DESIGNWARE_PCI This driver can also be built as a module. If so, the module will be called i2c-designware-pci. +config I2C_EG20T + tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) I2C" + depends on PCI + help + This driver is for PCH(Platform controller Hub) I2C of EG20T which + is an IOH(Input/Output Hub) for x86 embedded processor. + This driver can access PCH I2C bus device. + + This driver also can be used for LAPIS Semiconductor IOH(Input/ + Output Hub), ML7213, ML7223 and ML7831. + ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is + for MP(Media Phone) use and ML7831 IOH is for general purpose use. + ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series. + ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH. + config I2C_GPIO tristate "GPIO-based bitbanging I2C" depends on GENERIC_GPIO @@ -630,6 +646,16 @@ config I2C_SIMTEC This driver can also be built as a module. If so, the module will be called i2c-simtec. +config I2C_SIRF + tristate "CSR SiRFprimaII I2C interface" + depends on ARCH_PRIMA2 + help + If you say yes to this option, support will be included for the + CSR SiRFprimaII I2C interface. + + This driver can also be built as a module. If so, the module + will be called i2c-sirf. + config I2C_STU300 tristate "ST Microelectronics DDC I2C interface" depends on MACH_U300 @@ -681,20 +707,15 @@ config I2C_XILINX This driver can also be built as a module. If so, the module will be called xilinx_i2c. -config I2C_EG20T - tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) I2C" - depends on PCI +config I2C_XLR + tristate "XLR I2C support" + depends on CPU_XLR help - This driver is for PCH(Platform controller Hub) I2C of EG20T which - is an IOH(Input/Output Hub) for x86 embedded processor. - This driver can access PCH I2C bus device. + This driver enables support for the on-chip I2C interface of + the Netlogic XLR/XLS MIPS processors. - This driver also can be used for LAPIS Semiconductor IOH(Input/ - Output Hub), ML7213, ML7223 and ML7831. - ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is - for MP(Media Phone) use and ML7831 IOH is for general purpose use. - ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series. - ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH. + This driver can also be built as a module. If so, the module + will be called i2c-xlr. comment "External I2C/SMBus adapter drivers" diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index fba6da6..569567b 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -37,6 +37,7 @@ obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM) += i2c-designware-platform.o i2c-designware-platform-objs := i2c-designware-platdrv.o i2c-designware-core.o obj-$(CONFIG_I2C_DESIGNWARE_PCI) += i2c-designware-pci.o i2c-designware-pci-objs := i2c-designware-pcidrv.o i2c-designware-core.o +obj-$(CONFIG_I2C_EG20T) += i2c-eg20t.o obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o @@ -63,12 +64,13 @@ obj-$(CONFIG_I2C_S6000) += i2c-s6000.o obj-$(CONFIG_I2C_SH7760) += i2c-sh7760.o obj-$(CONFIG_I2C_SH_MOBILE) += i2c-sh_mobile.o obj-$(CONFIG_I2C_SIMTEC) += i2c-simtec.o +obj-$(CONFIG_I2C_SIRF) += i2c-sirf.o obj-$(CONFIG_I2C_STU300) += i2c-stu300.o obj-$(CONFIG_I2C_TEGRA) += i2c-tegra.o obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o obj-$(CONFIG_I2C_OCTEON) += i2c-octeon.o obj-$(CONFIG_I2C_XILINX) += i2c-xiic.o -obj-$(CONFIG_I2C_EG20T) += i2c-eg20t.o +obj-$(CONFIG_I2C_XLR) += i2c-xlr.o # External I2C/SMBus adapter drivers obj-$(CONFIG_I2C_DIOLAN_U2C) += i2c-diolan-u2c.o diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 5244c47..4ba589a 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -214,7 +214,7 @@ static int __init dw_i2c_init_driver(void) { return platform_driver_probe(&dw_i2c_driver, dw_i2c_probe); } -module_init(dw_i2c_init_driver); +subsys_initcall(dw_i2c_init_driver); static void __exit dw_i2c_exit_driver(void) { diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c index ca88776..f086131 100644 --- a/drivers/i2c/busses/i2c-eg20t.c +++ b/drivers/i2c/busses/i2c-eg20t.c @@ -271,30 +271,36 @@ static inline bool ktime_lt(const ktime_t cmp1, const ktime_t cmp2) /** * pch_i2c_wait_for_bus_idle() - check the status of bus. * @adap: Pointer to struct i2c_algo_pch_data. - * @timeout: waiting time counter (us). + * @timeout: waiting time counter (ms). */ static s32 pch_i2c_wait_for_bus_idle(struct i2c_algo_pch_data *adap, s32 timeout) { void __iomem *p = adap->pch_base_address; - ktime_t ns_val; + int schedule = 0; + unsigned long end = jiffies + msecs_to_jiffies(timeout); + + while (ioread32(p + PCH_I2CSR) & I2CMBB_BIT) { + if (time_after(jiffies, end)) { + pch_dbg(adap, "I2CSR = %x\n", ioread32(p + PCH_I2CSR)); + pch_err(adap, "%s: Timeout Error.return%d\n", + __func__, -ETIME); + pch_i2c_init(adap); - if ((ioread32(p + PCH_I2CSR) & I2CMBB_BIT) == 0) - return 0; + return -ETIME; + } - /* MAX timeout value is timeout*1000*1000nsec */ - ns_val = ktime_add_ns(ktime_get(), timeout*1000*1000); - do { - msleep(20); - if ((ioread32(p + PCH_I2CSR) & I2CMBB_BIT) == 0) - return 0; - } while (ktime_lt(ktime_get(), ns_val)); + if (!schedule) + /* Retry after some usecs */ + udelay(5); + else + /* Wait a bit more without consuming CPU */ + usleep_range(20, 1000); - pch_dbg(adap, "I2CSR = %x\n", ioread32(p + PCH_I2CSR)); - pch_err(adap, "%s: Timeout Error.return%d\n", __func__, -ETIME); - pch_i2c_init(adap); + schedule = 1; + } - return -ETIME; + return 0; } /** @@ -778,8 +784,6 @@ static s32 pch_i2c_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *pmsg; u32 i = 0; u32 status; - u32 msglen; - u32 subaddrlen; s32 ret; struct i2c_algo_pch_data *adap = i2c_adap->algo_data; @@ -804,12 +808,6 @@ static s32 pch_i2c_xfer(struct i2c_adapter *i2c_adap, status = pmsg->flags; pch_dbg(adap, "After invoking I2C_MODE_SEL :flag= 0x%x\n", status); - /* calculate sub address length and message length */ - /* these are applicable only for buffer mode */ - subaddrlen = pmsg->buf[0]; - /* calculate actual message length excluding - * the sub address fields */ - msglen = (pmsg->len) - (subaddrlen + 1); if ((status & (I2C_M_RD)) != false) { ret = pch_i2c_readbytes(i2c_adap, pmsg, (i + 1 == num), diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c index a651779..c0330a4 100644 --- a/drivers/i2c/busses/i2c-gpio.c +++ b/drivers/i2c/busses/i2c-gpio.c @@ -14,8 +14,15 @@ #include <linux/module.h> #include <linux/slab.h> #include <linux/platform_device.h> - -#include <asm/gpio.h> +#include <linux/gpio.h> +#include <linux/of_gpio.h> +#include <linux/of_i2c.h> + +struct i2c_gpio_private_data { + struct i2c_adapter adap; + struct i2c_algo_bit_data bit_data; + struct i2c_gpio_platform_data pdata; +}; /* Toggle SDA by changing the direction of the pin */ static void i2c_gpio_setsda_dir(void *data, int state) @@ -78,24 +85,62 @@ static int i2c_gpio_getscl(void *data) return gpio_get_value(pdata->scl_pin); } +static int __devinit of_i2c_gpio_probe(struct device_node *np, + struct i2c_gpio_platform_data *pdata) +{ + u32 reg; + + if (of_gpio_count(np) < 2) + return -ENODEV; + + pdata->sda_pin = of_get_gpio(np, 0); + pdata->scl_pin = of_get_gpio(np, 1); + + if (!gpio_is_valid(pdata->sda_pin) || !gpio_is_valid(pdata->scl_pin)) { + pr_err("%s: invalid GPIO pins, sda=%d/scl=%d\n", + np->full_name, pdata->sda_pin, pdata->scl_pin); + return -ENODEV; + } + + of_property_read_u32(np, "i2c-gpio,delay-us", &pdata->udelay); + + if (!of_property_read_u32(np, "i2c-gpio,timeout-ms", ®)) + pdata->timeout = msecs_to_jiffies(reg); + + pdata->sda_is_open_drain = + of_property_read_bool(np, "i2c-gpio,sda-open-drain"); + pdata->scl_is_open_drain = + of_property_read_bool(np, "i2c-gpio,scl-open-drain"); + pdata->scl_is_output_only = + of_property_read_bool(np, "i2c-gpio,scl-output-only"); + + return 0; +} + static int __devinit i2c_gpio_probe(struct platform_device *pdev) { + struct i2c_gpio_private_data *priv; struct i2c_gpio_platform_data *pdata; struct i2c_algo_bit_data *bit_data; struct i2c_adapter *adap; int ret; - pdata = pdev->dev.platform_data; - if (!pdata) - return -ENXIO; - - ret = -ENOMEM; - adap = kzalloc(sizeof(struct i2c_adapter), GFP_KERNEL); - if (!adap) - goto err_alloc_adap; - bit_data = kzalloc(sizeof(struct i2c_algo_bit_data), GFP_KERNEL); - if (!bit_data) - goto err_alloc_bit_data; + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + adap = &priv->adap; + bit_data = &priv->bit_data; + pdata = &priv->pdata; + + if (pdev->dev.of_node) { + ret = of_i2c_gpio_probe(pdev->dev.of_node, pdata); + if (ret) + return ret; + } else { + if (!pdev->dev.platform_data) + return -ENXIO; + memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata)); + } ret = gpio_request(pdata->sda_pin, "sda"); if (ret) @@ -143,6 +188,7 @@ static int __devinit i2c_gpio_probe(struct platform_device *pdev) adap->algo_data = bit_data; adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; adap->dev.parent = &pdev->dev; + adap->dev.of_node = pdev->dev.of_node; /* * If "dev->id" is negative we consider it as zero. @@ -154,7 +200,9 @@ static int __devinit i2c_gpio_probe(struct platform_device *pdev) if (ret) goto err_add_bus; - platform_set_drvdata(pdev, adap); + of_i2c_register_devices(adap); + + platform_set_drvdata(pdev, priv); dev_info(&pdev->dev, "using pins %u (SDA) and %u (SCL%s)\n", pdata->sda_pin, pdata->scl_pin, @@ -168,34 +216,40 @@ err_add_bus: err_request_scl: gpio_free(pdata->sda_pin); err_request_sda: - kfree(bit_data); -err_alloc_bit_data: - kfree(adap); -err_alloc_adap: return ret; } static int __devexit i2c_gpio_remove(struct platform_device *pdev) { + struct i2c_gpio_private_data *priv; struct i2c_gpio_platform_data *pdata; struct i2c_adapter *adap; - adap = platform_get_drvdata(pdev); - pdata = pdev->dev.platform_data; + priv = platform_get_drvdata(pdev); + adap = &priv->adap; + pdata = &priv->pdata; i2c_del_adapter(adap); gpio_free(pdata->scl_pin); gpio_free(pdata->sda_pin); - kfree(adap->algo_data); - kfree(adap); return 0; } +#if defined(CONFIG_OF) +static const struct of_device_id i2c_gpio_dt_ids[] = { + { .compatible = "i2c-gpio", }, + { /* sentinel */ } +}; + +MODULE_DEVICE_TABLE(of, i2c_gpio_dt_ids); +#endif + static struct platform_driver i2c_gpio_driver = { .driver = { .name = "i2c-gpio", .owner = THIS_MODULE, + .of_match_table = of_match_ptr(i2c_gpio_dt_ids), }, .probe = i2c_gpio_probe, .remove = __devexit_p(i2c_gpio_remove), diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 5d2e281..ae2945a5 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -2,7 +2,7 @@ Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>, Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker <mdsxyz123@yahoo.com> - Copyright (C) 2007, 2008 Jean Delvare <khali@linux-fr.org> + Copyright (C) 2007 - 2012 Jean Delvare <khali@linux-fr.org> Copyright (C) 2010 Intel Corporation, David Woodhouse <dwmw2@infradead.org> @@ -51,6 +51,7 @@ Patsburg (PCH) IDF 0x1d72 32 hard yes yes yes DH89xxCC (PCH) 0x2330 32 hard yes yes yes Panther Point (PCH) 0x1e22 32 hard yes yes yes + Lynx Point (PCH) 0x8c22 32 hard yes yes yes Features supported by this driver: Software PEC no @@ -105,7 +106,7 @@ #define SMBHSTCNT_KILL 2 /* Other settings */ -#define MAX_TIMEOUT 100 +#define MAX_RETRIES 400 #define ENABLE_INT9 0 /* set to 0x01 to enable - untested */ /* I801 command constants */ @@ -145,6 +146,7 @@ #define PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS 0x1e22 #define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30 +#define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22 struct i801_priv { struct i2c_adapter adapter; @@ -215,7 +217,7 @@ static int i801_check_post(struct i801_priv *priv, int status, int timeout) dev_dbg(&priv->pci_dev->dev, "Terminating the current operation\n"); outb_p(inb_p(SMBHSTCNT(priv)) | SMBHSTCNT_KILL, SMBHSTCNT(priv)); - msleep(1); + usleep_range(1000, 2000); outb_p(inb_p(SMBHSTCNT(priv)) & (~SMBHSTCNT_KILL), SMBHSTCNT(priv)); @@ -272,11 +274,11 @@ static int i801_transaction(struct i801_priv *priv, int xact) /* We will always wait for a fraction of a second! */ do { - msleep(1); + usleep_range(250, 500); status = inb_p(SMBHSTSTS(priv)); - } while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_TIMEOUT)); + } while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_RETRIES)); - result = i801_check_post(priv, status, timeout > MAX_TIMEOUT); + result = i801_check_post(priv, status, timeout > MAX_RETRIES); if (result < 0) return result; @@ -291,12 +293,12 @@ static void i801_wait_hwpec(struct i801_priv *priv) int status; do { - msleep(1); + usleep_range(250, 500); status = inb_p(SMBHSTSTS(priv)); } while ((!(status & SMBHSTSTS_INTR)) - && (timeout++ < MAX_TIMEOUT)); + && (timeout++ < MAX_RETRIES)); - if (timeout > MAX_TIMEOUT) + if (timeout > MAX_RETRIES) dev_dbg(&priv->pci_dev->dev, "PEC Timeout!\n"); outb_p(status, SMBHSTSTS(priv)); @@ -380,12 +382,12 @@ static int i801_block_transaction_byte_by_byte(struct i801_priv *priv, /* We will always wait for a fraction of a second! */ timeout = 0; do { - msleep(1); + usleep_range(250, 500); status = inb_p(SMBHSTSTS(priv)); } while ((!(status & SMBHSTSTS_BYTE_DONE)) - && (timeout++ < MAX_TIMEOUT)); + && (timeout++ < MAX_RETRIES)); - result = i801_check_post(priv, status, timeout > MAX_TIMEOUT); + result = i801_check_post(priv, status, timeout > MAX_RETRIES); if (result < 0) return result; @@ -633,6 +635,7 @@ static DEFINE_PCI_DEVICE_TABLE(i801_ids) = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PATSBURG_SMBUS_IDF2) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS) }, { 0, } }; diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index 58832e5..dfb84b7 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -149,11 +149,6 @@ static int i2c_imx_bus_busy(struct imx_i2c_struct *i2c_imx, int for_busy) break; if (!for_busy && !(temp & I2SR_IBB)) break; - if (signal_pending(current)) { - dev_dbg(&i2c_imx->adapter.dev, - "<%s> I2C Interrupted\n", __func__); - return -EINTR; - } if (time_after(jiffies, orig_jiffies + msecs_to_jiffies(500))) { dev_dbg(&i2c_imx->adapter.dev, "<%s> I2C bus is busy\n", __func__); @@ -196,7 +191,7 @@ static int i2c_imx_start(struct imx_i2c_struct *i2c_imx) dev_dbg(&i2c_imx->adapter.dev, "<%s>\n", __func__); - clk_enable(i2c_imx->clk); + clk_prepare_enable(i2c_imx->clk); writeb(i2c_imx->ifdr, i2c_imx->base + IMX_I2C_IFDR); /* Enable I2C controller */ writeb(0, i2c_imx->base + IMX_I2C_I2SR); @@ -245,7 +240,7 @@ static void i2c_imx_stop(struct imx_i2c_struct *i2c_imx) /* Disable I2C controller */ writeb(0, i2c_imx->base + IMX_I2C_I2CR); - clk_disable(i2c_imx->clk); + clk_disable_unprepare(i2c_imx->clk); } static void __init i2c_imx_set_clk(struct imx_i2c_struct *i2c_imx, diff --git a/drivers/i2c/busses/i2c-isch.c b/drivers/i2c/busses/i2c-isch.c index 6561d27..f90a605 100644 --- a/drivers/i2c/busses/i2c-isch.c +++ b/drivers/i2c/busses/i2c-isch.c @@ -47,7 +47,7 @@ #define SMBBLKDAT (0x20 + sch_smba) /* Other settings */ -#define MAX_TIMEOUT 500 +#define MAX_RETRIES 5000 /* I2C constants */ #define SCH_QUICK 0x00 @@ -68,7 +68,7 @@ static int sch_transaction(void) { int temp; int result = 0; - int timeout = 0; + int retries = 0; dev_dbg(&sch_adapter.dev, "Transaction (pre): CNT=%02x, CMD=%02x, " "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb(SMBHSTCNT), @@ -100,12 +100,12 @@ static int sch_transaction(void) outb(inb(SMBHSTCNT) | 0x10, SMBHSTCNT); do { - msleep(1); + usleep_range(100, 200); temp = inb(SMBHSTSTS) & 0x0f; - } while ((temp & 0x08) && (timeout++ < MAX_TIMEOUT)); + } while ((temp & 0x08) && (retries++ < MAX_RETRIES)); /* If the SMBus is still busy, we give up */ - if (timeout > MAX_TIMEOUT) { + if (retries > MAX_RETRIES) { dev_err(&sch_adapter.dev, "SMBus Timeout!\n"); result = -ETIMEDOUT; } diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index a8ebb84..206caac 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -454,7 +454,7 @@ static int mpc_write(struct mpc_i2c *i2c, int target, } static int mpc_read(struct mpc_i2c *i2c, int target, - u8 *data, int length, int restart) + u8 *data, int length, int restart, bool recv_len) { unsigned timeout = i2c->adap.timeout; int i, result; @@ -470,7 +470,7 @@ static int mpc_read(struct mpc_i2c *i2c, int target, return result; if (length) { - if (length == 1) + if (length == 1 && !recv_len) writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_TXAK); else writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA); @@ -479,17 +479,46 @@ static int mpc_read(struct mpc_i2c *i2c, int target, } for (i = 0; i < length; i++) { + u8 byte; + result = i2c_wait(i2c, timeout, 0); if (result < 0) return result; - /* Generate txack on next to last byte */ - if (i == length - 2) - writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_TXAK); - /* Do not generate stop on last byte */ - if (i == length - 1) - writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX); - data[i] = readb(i2c->base + MPC_I2C_DR); + /* + * For block reads, we have to know the total length (1st byte) + * before we can determine if we are done. + */ + if (i || !recv_len) { + /* Generate txack on next to last byte */ + if (i == length - 2) + writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA + | CCR_TXAK); + /* Do not generate stop on last byte */ + if (i == length - 1) + writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA + | CCR_MTX); + } + + byte = readb(i2c->base + MPC_I2C_DR); + + /* + * Adjust length if first received byte is length. + * The length is 1 length byte plus actually data length + */ + if (i == 0 && recv_len) { + if (byte == 0 || byte > I2C_SMBUS_BLOCK_MAX) + return -EPROTO; + length += byte; + /* + * For block reads, generate txack here if data length + * is 1 byte (total length is 2 bytes). + */ + if (length == 2) + writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA + | CCR_TXAK); + } + data[i] = byte; } return length; @@ -532,12 +561,17 @@ static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) "Doing %s %d bytes to 0x%02x - %d of %d messages\n", pmsg->flags & I2C_M_RD ? "read" : "write", pmsg->len, pmsg->addr, i + 1, num); - if (pmsg->flags & I2C_M_RD) - ret = - mpc_read(i2c, pmsg->addr, pmsg->buf, pmsg->len, i); - else + if (pmsg->flags & I2C_M_RD) { + bool recv_len = pmsg->flags & I2C_M_RECV_LEN; + + ret = mpc_read(i2c, pmsg->addr, pmsg->buf, pmsg->len, i, + recv_len); + if (recv_len && ret > 0) + pmsg->len = ret; + } else { ret = mpc_write(i2c, pmsg->addr, pmsg->buf, pmsg->len, i); + } } mpc_i2c_stop(i2c); return (ret < 0) ? ret : num; @@ -545,7 +579,8 @@ static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) static u32 mpc_functionality(struct i2c_adapter *adap) { - return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL + | I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL; } static const struct i2c_algorithm mpc_algo = { diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 7e78f7c..3d471d5 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -72,6 +72,7 @@ #define MXS_I2C_QUEUESTAT (0x70) #define MXS_I2C_QUEUESTAT_RD_QUEUE_EMPTY 0x00002000 +#define MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK 0x0000001F #define MXS_I2C_QUEUECMD (0x80) @@ -219,14 +220,14 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg, int ret; int flags; - init_completion(&i2c->cmd_complete); - dev_dbg(i2c->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n", msg->addr, msg->len, msg->flags, stop); if (msg->len == 0) return -EINVAL; + init_completion(&i2c->cmd_complete); + flags = stop ? MXS_I2C_CTRL0_POST_SEND_STOP : 0; if (msg->flags & I2C_M_RD) @@ -286,6 +287,7 @@ static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id) { struct mxs_i2c_dev *i2c = dev_id; u32 stat = readl(i2c->regs + MXS_I2C_CTRL1) & MXS_I2C_IRQ_MASK; + bool is_last_cmd; if (!stat) return IRQ_NONE; @@ -300,9 +302,14 @@ static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id) else i2c->cmd_err = 0; - complete(&i2c->cmd_complete); + is_last_cmd = (readl(i2c->regs + MXS_I2C_QUEUESTAT) & + MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK) == 0; + + if (is_last_cmd || i2c->cmd_err) + complete(&i2c->cmd_complete); writel(stat, i2c->regs + MXS_I2C_CTRL1_CLR); + return IRQ_HANDLED; } diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index f713eac..801df60 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -1018,7 +1018,7 @@ omap_i2c_probe(struct platform_device *pdev) goto err_release_region; } - match = of_match_device(omap_i2c_of_match, &pdev->dev); + match = of_match_device(of_match_ptr(omap_i2c_of_match), &pdev->dev); if (match) { u32 freq = 100000; /* default to 100000 Hz */ diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index d603646..f673326 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -29,6 +29,8 @@ #include <linux/errno.h> #include <linux/interrupt.h> #include <linux/i2c-pxa.h> +#include <linux/of.h> +#include <linux/of_device.h> #include <linux/of_i2c.h> #include <linux/platform_device.h> #include <linux/err.h> @@ -1044,23 +1046,60 @@ static const struct i2c_algorithm i2c_pxa_pio_algorithm = { .functionality = i2c_pxa_functionality, }; -static int i2c_pxa_probe(struct platform_device *dev) +static struct of_device_id i2c_pxa_dt_ids[] = { + { .compatible = "mrvl,pxa-i2c", .data = (void *)REGS_PXA2XX }, + { .compatible = "mrvl,pwri2c", .data = (void *)REGS_PXA3XX }, + { .compatible = "mrvl,mmp-twsi", .data = (void *)REGS_PXA2XX }, + {} +}; +MODULE_DEVICE_TABLE(of, i2c_pxa_dt_ids); + +static int i2c_pxa_probe_dt(struct platform_device *pdev, struct pxa_i2c *i2c, + enum pxa_i2c_types *i2c_types) { - struct pxa_i2c *i2c; - struct resource *res; - struct i2c_pxa_platform_data *plat = dev->dev.platform_data; - const struct platform_device_id *id = platform_get_device_id(dev); - enum pxa_i2c_types i2c_type = id->driver_data; + struct device_node *np = pdev->dev.of_node; + const struct of_device_id *of_id = + of_match_device(i2c_pxa_dt_ids, &pdev->dev); int ret; - int irq; - res = platform_get_resource(dev, IORESOURCE_MEM, 0); - irq = platform_get_irq(dev, 0); - if (res == NULL || irq < 0) - return -ENODEV; + if (!of_id) + return 1; + ret = of_alias_get_id(np, "i2c"); + if (ret < 0) { + dev_err(&pdev->dev, "failed to get alias id, errno %d\n", ret); + return ret; + } + pdev->id = ret; + if (of_get_property(np, "mrvl,i2c-polling", NULL)) + i2c->use_pio = 1; + if (of_get_property(np, "mrvl,i2c-fast-mode", NULL)) + i2c->fast_mode = 1; + *i2c_types = (u32)(of_id->data); + return 0; +} - if (!request_mem_region(res->start, resource_size(res), res->name)) - return -ENOMEM; +static int i2c_pxa_probe_pdata(struct platform_device *pdev, + struct pxa_i2c *i2c, + enum pxa_i2c_types *i2c_types) +{ + struct i2c_pxa_platform_data *plat = pdev->dev.platform_data; + const struct platform_device_id *id = platform_get_device_id(pdev); + + *i2c_types = id->driver_data; + if (plat) { + i2c->use_pio = plat->use_pio; + i2c->fast_mode = plat->fast_mode; + } + return 0; +} + +static int i2c_pxa_probe(struct platform_device *dev) +{ + struct i2c_pxa_platform_data *plat = dev->dev.platform_data; + enum pxa_i2c_types i2c_type; + struct pxa_i2c *i2c; + struct resource *res = NULL; + int ret, irq; i2c = kzalloc(sizeof(struct pxa_i2c), GFP_KERNEL); if (!i2c) { @@ -1068,6 +1107,24 @@ static int i2c_pxa_probe(struct platform_device *dev) goto emalloc; } + ret = i2c_pxa_probe_dt(dev, i2c, &i2c_type); + if (ret > 0) + ret = i2c_pxa_probe_pdata(dev, i2c, &i2c_type); + if (ret < 0) + goto eclk; + + res = platform_get_resource(dev, IORESOURCE_MEM, 0); + irq = platform_get_irq(dev, 0); + if (res == NULL || irq < 0) { + ret = -ENODEV; + goto eclk; + } + + if (!request_mem_region(res->start, resource_size(res), res->name)) { + ret = -ENOMEM; + goto eclk; + } + i2c->adap.owner = THIS_MODULE; i2c->adap.retries = 5; @@ -1109,21 +1166,16 @@ static int i2c_pxa_probe(struct platform_device *dev) i2c->slave_addr = I2C_PXA_SLAVE_ADDR; -#ifdef CONFIG_I2C_PXA_SLAVE if (plat) { +#ifdef CONFIG_I2C_PXA_SLAVE i2c->slave_addr = plat->slave_addr; i2c->slave = plat->slave; - } #endif - - clk_enable(i2c->clk); - - if (plat) { i2c->adap.class = plat->class; - i2c->use_pio = plat->use_pio; - i2c->fast_mode = plat->fast_mode; } + clk_enable(i2c->clk); + if (i2c->use_pio) { i2c->adap.algo = &i2c_pxa_pio_algorithm; } else { @@ -1234,6 +1286,7 @@ static struct platform_driver i2c_pxa_driver = { .name = "pxa2xx-i2c", .owner = THIS_MODULE, .pm = I2C_PXA_DEV_PM_OPS, + .of_match_table = i2c_pxa_dt_ids, }, .id_table = i2c_pxa_id_table, }; diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 4c17180..737f721 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -31,6 +31,7 @@ #include <linux/errno.h> #include <linux/err.h> #include <linux/platform_device.h> +#include <linux/pm_runtime.h> #include <linux/clk.h> #include <linux/cpufreq.h> #include <linux/slab.h> @@ -564,6 +565,7 @@ static int s3c24xx_i2c_xfer(struct i2c_adapter *adap, int retry; int ret; + pm_runtime_get_sync(&adap->dev); clk_enable(i2c->clk); for (retry = 0; retry < adap->retries; retry++) { @@ -572,6 +574,7 @@ static int s3c24xx_i2c_xfer(struct i2c_adapter *adap, if (ret != -EAGAIN) { clk_disable(i2c->clk); + pm_runtime_put_sync(&adap->dev); return ret; } @@ -581,6 +584,7 @@ static int s3c24xx_i2c_xfer(struct i2c_adapter *adap, } clk_disable(i2c->clk); + pm_runtime_put_sync(&adap->dev); return -EREMOTEIO; } @@ -890,7 +894,7 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) } } - i2c = kzalloc(sizeof(struct s3c24xx_i2c), GFP_KERNEL); + i2c = devm_kzalloc(&pdev->dev, sizeof(struct s3c24xx_i2c), GFP_KERNEL); if (!i2c) { dev_err(&pdev->dev, "no memory for state\n"); return -ENOMEM; @@ -1013,6 +1017,9 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) of_i2c_register_devices(&i2c->adap); platform_set_drvdata(pdev, i2c); + pm_runtime_enable(&pdev->dev); + pm_runtime_enable(&i2c->adap.dev); + dev_info(&pdev->dev, "%s: S3C I2C adapter\n", dev_name(&i2c->adap.dev)); clk_disable(i2c->clk); return 0; @@ -1035,7 +1042,6 @@ static int s3c24xx_i2c_probe(struct platform_device *pdev) clk_put(i2c->clk); err_noclk: - kfree(i2c); return ret; } @@ -1048,6 +1054,9 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev) { struct s3c24xx_i2c *i2c = platform_get_drvdata(pdev); + pm_runtime_disable(&i2c->adap.dev); + pm_runtime_disable(&pdev->dev); + s3c24xx_i2c_deregister_cpufreq(i2c); i2c_del_adapter(&i2c->adap); @@ -1061,7 +1070,6 @@ static int s3c24xx_i2c_remove(struct platform_device *pdev) release_resource(i2c->ioarea); s3c24xx_i2c_dt_gpio_free(i2c); kfree(i2c->ioarea); - kfree(i2c); return 0; } diff --git a/drivers/i2c/busses/i2c-sirf.c b/drivers/i2c/busses/i2c-sirf.c new file mode 100644 index 0000000..5574a47 --- /dev/null +++ b/drivers/i2c/busses/i2c-sirf.c @@ -0,0 +1,459 @@ +/* + * I2C bus driver for CSR SiRFprimaII + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/platform_device.h> +#include <linux/i2c.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> + +#define SIRFSOC_I2C_CLK_CTRL 0x00 +#define SIRFSOC_I2C_STATUS 0x0C +#define SIRFSOC_I2C_CTRL 0x10 +#define SIRFSOC_I2C_IO_CTRL 0x14 +#define SIRFSOC_I2C_SDA_DELAY 0x18 +#define SIRFSOC_I2C_CMD_START 0x1C +#define SIRFSOC_I2C_CMD_BUF 0x30 +#define SIRFSOC_I2C_DATA_BUF 0x80 + +#define SIRFSOC_I2C_CMD_BUF_MAX 16 +#define SIRFSOC_I2C_DATA_BUF_MAX 16 + +#define SIRFSOC_I2C_CMD(x) (SIRFSOC_I2C_CMD_BUF + (x)*0x04) +#define SIRFSOC_I2C_DATA_MASK(x) (0xFF<<(((x)&3)*8)) +#define SIRFSOC_I2C_DATA_SHIFT(x) (((x)&3)*8) + +#define SIRFSOC_I2C_DIV_MASK (0xFFFF) + +/* I2C status flags */ +#define SIRFSOC_I2C_STAT_BUSY BIT(0) +#define SIRFSOC_I2C_STAT_TIP BIT(1) +#define SIRFSOC_I2C_STAT_NACK BIT(2) +#define SIRFSOC_I2C_STAT_TR_INT BIT(4) +#define SIRFSOC_I2C_STAT_STOP BIT(6) +#define SIRFSOC_I2C_STAT_CMD_DONE BIT(8) +#define SIRFSOC_I2C_STAT_ERR BIT(9) +#define SIRFSOC_I2C_CMD_INDEX (0x1F<<16) + +/* I2C control flags */ +#define SIRFSOC_I2C_RESET BIT(0) +#define SIRFSOC_I2C_CORE_EN BIT(1) +#define SIRFSOC_I2C_MASTER_MODE BIT(2) +#define SIRFSOC_I2C_CMD_DONE_EN BIT(11) +#define SIRFSOC_I2C_ERR_INT_EN BIT(12) + +#define SIRFSOC_I2C_SDA_DELAY_MASK (0xFF) +#define SIRFSOC_I2C_SCLF_FILTER (3<<8) + +#define SIRFSOC_I2C_START_CMD BIT(0) + +#define SIRFSOC_I2C_CMD_RP(x) ((x)&0x7) +#define SIRFSOC_I2C_NACK BIT(3) +#define SIRFSOC_I2C_WRITE BIT(4) +#define SIRFSOC_I2C_READ BIT(5) +#define SIRFSOC_I2C_STOP BIT(6) +#define SIRFSOC_I2C_START BIT(7) + +#define SIRFSOC_I2C_DEFAULT_SPEED 100000 + +struct sirfsoc_i2c { + void __iomem *base; + struct clk *clk; + u32 cmd_ptr; /* Current position in CMD buffer */ + u8 *buf; /* Buffer passed by user */ + u32 msg_len; /* Message length */ + u32 finished_len; /* number of bytes read/written */ + u32 read_cmd_len; /* number of read cmd sent */ + int msg_read; /* 1 indicates a read message */ + int err_status; /* 1 indicates an error on bus */ + + u32 sda_delay; /* For suspend/resume */ + u32 clk_div; + int last; /* Last message in transfer, STOP cmd can be sent */ + + struct completion done; /* indicates completion of message transfer */ + struct i2c_adapter adapter; +}; + +static void i2c_sirfsoc_read_data(struct sirfsoc_i2c *siic) +{ + u32 data = 0; + int i; + + for (i = 0; i < siic->read_cmd_len; i++) { + if (!(i & 0x3)) + data = readl(siic->base + SIRFSOC_I2C_DATA_BUF + i); + siic->buf[siic->finished_len++] = + (u8)((data & SIRFSOC_I2C_DATA_MASK(i)) >> + SIRFSOC_I2C_DATA_SHIFT(i)); + } +} + +static void i2c_sirfsoc_queue_cmd(struct sirfsoc_i2c *siic) +{ + u32 regval; + int i = 0; + + if (siic->msg_read) { + while (((siic->finished_len + i) < siic->msg_len) + && (siic->cmd_ptr < SIRFSOC_I2C_CMD_BUF_MAX)) { + regval = SIRFSOC_I2C_READ | SIRFSOC_I2C_CMD_RP(0); + if (((siic->finished_len + i) == + (siic->msg_len - 1)) && siic->last) + regval |= SIRFSOC_I2C_STOP | SIRFSOC_I2C_NACK; + writel(regval, + siic->base + SIRFSOC_I2C_CMD(siic->cmd_ptr++)); + i++; + } + + siic->read_cmd_len = i; + } else { + while ((siic->cmd_ptr < SIRFSOC_I2C_CMD_BUF_MAX - 1) + && (siic->finished_len < siic->msg_len)) { + regval = SIRFSOC_I2C_WRITE | SIRFSOC_I2C_CMD_RP(0); + if ((siic->finished_len == (siic->msg_len - 1)) + && siic->last) + regval |= SIRFSOC_I2C_STOP; + writel(regval, + siic->base + SIRFSOC_I2C_CMD(siic->cmd_ptr++)); + writel(siic->buf[siic->finished_len++], + siic->base + SIRFSOC_I2C_CMD(siic->cmd_ptr++)); + } + } + siic->cmd_ptr = 0; + + /* Trigger the transfer */ + writel(SIRFSOC_I2C_START_CMD, siic->base + SIRFSOC_I2C_CMD_START); +} + +static irqreturn_t i2c_sirfsoc_irq(int irq, void *dev_id) +{ + struct sirfsoc_i2c *siic = (struct sirfsoc_i2c *)dev_id; + u32 i2c_stat = readl(siic->base + SIRFSOC_I2C_STATUS); + + if (i2c_stat & SIRFSOC_I2C_STAT_ERR) { + /* Error conditions */ + siic->err_status = 1; + writel(SIRFSOC_I2C_STAT_ERR, siic->base + SIRFSOC_I2C_STATUS); + + if (i2c_stat & SIRFSOC_I2C_STAT_NACK) + dev_err(&siic->adapter.dev, "ACK not received\n"); + else + dev_err(&siic->adapter.dev, "I2C error\n"); + + complete(&siic->done); + } else if (i2c_stat & SIRFSOC_I2C_STAT_CMD_DONE) { + /* CMD buffer execution complete */ + if (siic->msg_read) + i2c_sirfsoc_read_data(siic); + if (siic->finished_len == siic->msg_len) + complete(&siic->done); + else /* Fill a new CMD buffer for left data */ + i2c_sirfsoc_queue_cmd(siic); + + writel(SIRFSOC_I2C_STAT_CMD_DONE, siic->base + SIRFSOC_I2C_STATUS); + } + + return IRQ_HANDLED; +} + +static void i2c_sirfsoc_set_address(struct sirfsoc_i2c *siic, + struct i2c_msg *msg) +{ + unsigned char addr; + u32 regval = SIRFSOC_I2C_START | SIRFSOC_I2C_CMD_RP(0) | SIRFSOC_I2C_WRITE; + + /* no data and last message -> add STOP */ + if (siic->last && (msg->len == 0)) + regval |= SIRFSOC_I2C_STOP; + + writel(regval, siic->base + SIRFSOC_I2C_CMD(siic->cmd_ptr++)); + + addr = msg->addr << 1; /* Generate address */ + if (msg->flags & I2C_M_RD) + addr |= 1; + + writel(addr, siic->base + SIRFSOC_I2C_CMD(siic->cmd_ptr++)); +} + +static int i2c_sirfsoc_xfer_msg(struct sirfsoc_i2c *siic, struct i2c_msg *msg) +{ + u32 regval = readl(siic->base + SIRFSOC_I2C_CTRL); + /* timeout waiting for the xfer to finish or fail */ + int timeout = msecs_to_jiffies((msg->len + 1) * 50); + int ret = 0; + + i2c_sirfsoc_set_address(siic, msg); + + writel(regval | SIRFSOC_I2C_CMD_DONE_EN | SIRFSOC_I2C_ERR_INT_EN, + siic->base + SIRFSOC_I2C_CTRL); + i2c_sirfsoc_queue_cmd(siic); + + if (wait_for_completion_timeout(&siic->done, timeout) == 0) { + siic->err_status = 1; + dev_err(&siic->adapter.dev, "Transfer timeout\n"); + } + + writel(regval & ~(SIRFSOC_I2C_CMD_DONE_EN | SIRFSOC_I2C_ERR_INT_EN), + siic->base + SIRFSOC_I2C_CTRL); + writel(0, siic->base + SIRFSOC_I2C_CMD_START); + + if (siic->err_status) { + writel(readl(siic->base + SIRFSOC_I2C_CTRL) | SIRFSOC_I2C_RESET, + siic->base + SIRFSOC_I2C_CTRL); + while (readl(siic->base + SIRFSOC_I2C_CTRL) & SIRFSOC_I2C_RESET) + cpu_relax(); + + ret = -EIO; + } + + return ret; +} + +static u32 i2c_sirfsoc_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static int i2c_sirfsoc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, + int num) +{ + struct sirfsoc_i2c *siic = adap->algo_data; + int i, ret; + + clk_enable(siic->clk); + + for (i = 0; i < num; i++) { + siic->buf = msgs[i].buf; + siic->msg_len = msgs[i].len; + siic->msg_read = !!(msgs[i].flags & I2C_M_RD); + siic->err_status = 0; + siic->cmd_ptr = 0; + siic->finished_len = 0; + siic->last = (i == (num - 1)); + + ret = i2c_sirfsoc_xfer_msg(siic, &msgs[i]); + if (ret) { + clk_disable(siic->clk); + return ret; + } + } + + clk_disable(siic->clk); + return num; +} + +/* I2C algorithms associated with this master controller driver */ +static const struct i2c_algorithm i2c_sirfsoc_algo = { + .master_xfer = i2c_sirfsoc_xfer, + .functionality = i2c_sirfsoc_func, +}; + +static int __devinit i2c_sirfsoc_probe(struct platform_device *pdev) +{ + struct sirfsoc_i2c *siic; + struct i2c_adapter *adap; + struct resource *mem_res; + struct clk *clk; + int bitrate; + int ctrl_speed; + int irq; + + int err; + u32 regval; + + clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) { + err = PTR_ERR(clk); + dev_err(&pdev->dev, "Clock get failed\n"); + goto err_get_clk; + } + + err = clk_prepare(clk); + if (err) { + dev_err(&pdev->dev, "Clock prepare failed\n"); + goto err_clk_prep; + } + + err = clk_enable(clk); + if (err) { + dev_err(&pdev->dev, "Clock enable failed\n"); + goto err_clk_en; + } + + ctrl_speed = clk_get_rate(clk); + + siic = devm_kzalloc(&pdev->dev, sizeof(*siic), GFP_KERNEL); + if (!siic) { + dev_err(&pdev->dev, "Can't allocate driver data\n"); + err = -ENOMEM; + goto out; + } + adap = &siic->adapter; + adap->class = I2C_CLASS_HWMON; + + mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (mem_res == NULL) { + dev_err(&pdev->dev, "Unable to get MEM resource\n"); + err = -EINVAL; + goto out; + } + + siic->base = devm_request_and_ioremap(&pdev->dev, mem_res); + if (siic->base == NULL) { + dev_err(&pdev->dev, "IO remap failed!\n"); + err = -ENOMEM; + goto out; + } + + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + err = irq; + goto out; + } + err = devm_request_irq(&pdev->dev, irq, i2c_sirfsoc_irq, 0, + dev_name(&pdev->dev), siic); + if (err) + goto out; + + adap->algo = &i2c_sirfsoc_algo; + adap->algo_data = siic; + + adap->dev.parent = &pdev->dev; + adap->nr = pdev->id; + + strlcpy(adap->name, "sirfsoc-i2c", sizeof(adap->name)); + + platform_set_drvdata(pdev, adap); + init_completion(&siic->done); + + /* Controller Initalisation */ + + writel(SIRFSOC_I2C_RESET, siic->base + SIRFSOC_I2C_CTRL); + while (readl(siic->base + SIRFSOC_I2C_CTRL) & SIRFSOC_I2C_RESET) + cpu_relax(); + writel(SIRFSOC_I2C_CORE_EN | SIRFSOC_I2C_MASTER_MODE, + siic->base + SIRFSOC_I2C_CTRL); + + siic->clk = clk; + + err = of_property_read_u32(pdev->dev.of_node, + "clock-frequency", &bitrate); + if (err < 0) + bitrate = SIRFSOC_I2C_DEFAULT_SPEED; + + if (bitrate < 100000) + regval = + (2 * ctrl_speed) / (2 * bitrate * 11); + else + regval = ctrl_speed / (bitrate * 5); + + writel(regval, siic->base + SIRFSOC_I2C_CLK_CTRL); + if (regval > 0xFF) + writel(0xFF, siic->base + SIRFSOC_I2C_SDA_DELAY); + else + writel(regval, siic->base + SIRFSOC_I2C_SDA_DELAY); + + err = i2c_add_numbered_adapter(adap); + if (err < 0) { + dev_err(&pdev->dev, "Can't add new i2c adapter\n"); + goto out; + } + + clk_disable(clk); + + dev_info(&pdev->dev, " I2C adapter ready to operate\n"); + + return 0; + +out: + clk_disable(clk); +err_clk_en: + clk_unprepare(clk); +err_clk_prep: + clk_put(clk); +err_get_clk: + return err; +} + +static int __devexit i2c_sirfsoc_remove(struct platform_device *pdev) +{ + struct i2c_adapter *adapter = platform_get_drvdata(pdev); + struct sirfsoc_i2c *siic = adapter->algo_data; + + writel(SIRFSOC_I2C_RESET, siic->base + SIRFSOC_I2C_CTRL); + i2c_del_adapter(adapter); + clk_unprepare(siic->clk); + clk_put(siic->clk); + return 0; +} + +#ifdef CONFIG_PM +static int i2c_sirfsoc_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct i2c_adapter *adapter = platform_get_drvdata(pdev); + struct sirfsoc_i2c *siic = adapter->algo_data; + + clk_enable(siic->clk); + siic->sda_delay = readl(siic->base + SIRFSOC_I2C_SDA_DELAY); + siic->clk_div = readl(siic->base + SIRFSOC_I2C_CLK_CTRL); + clk_disable(siic->clk); + return 0; +} + +static int i2c_sirfsoc_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct i2c_adapter *adapter = platform_get_drvdata(pdev); + struct sirfsoc_i2c *siic = adapter->algo_data; + + clk_enable(siic->clk); + writel(SIRFSOC_I2C_RESET, siic->base + SIRFSOC_I2C_CTRL); + writel(SIRFSOC_I2C_CORE_EN | SIRFSOC_I2C_MASTER_MODE, + siic->base + SIRFSOC_I2C_CTRL); + writel(siic->clk_div, siic->base + SIRFSOC_I2C_CLK_CTRL); + writel(siic->sda_delay, siic->base + SIRFSOC_I2C_SDA_DELAY); + clk_disable(siic->clk); + return 0; +} + +static const struct dev_pm_ops i2c_sirfsoc_pm_ops = { + .suspend = i2c_sirfsoc_suspend, + .resume = i2c_sirfsoc_resume, +}; +#endif + +static const struct of_device_id sirfsoc_i2c_of_match[] __devinitconst = { + { .compatible = "sirf,prima2-i2c", }, + {}, +}; +MODULE_DEVICE_TABLE(of, sirfsoc_i2c_of_match); + +static struct platform_driver i2c_sirfsoc_driver = { + .driver = { + .name = "sirfsoc_i2c", + .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &i2c_sirfsoc_pm_ops, +#endif + .of_match_table = sirfsoc_i2c_of_match, + }, + .probe = i2c_sirfsoc_probe, + .remove = __devexit_p(i2c_sirfsoc_remove), +}; +module_platform_driver(i2c_sirfsoc_driver); + +MODULE_DESCRIPTION("SiRF SoC I2C master controller driver"); +MODULE_AUTHOR("Zhiwu Song <Zhiwu.Song@csr.com>, " + "Xiangzhen Ye <Xiangzhen.Ye@csr.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/i2c/busses/i2c-tegra.c b/drivers/i2c/busses/i2c-tegra.c index 6381604..e978635 100644 --- a/drivers/i2c/busses/i2c-tegra.c +++ b/drivers/i2c/busses/i2c-tegra.c @@ -457,7 +457,6 @@ static int tegra_i2c_xfer_msg(struct tegra_i2c_dev *i2c_dev, int ret; tegra_i2c_flush_fifos(i2c_dev); - i2c_writel(i2c_dev, 0xFF, I2C_INT_STATUS); if (msg->len == 0) return -EINVAL; @@ -755,7 +754,7 @@ MODULE_DEVICE_TABLE(of, tegra_i2c_of_match); static struct platform_driver tegra_i2c_driver = { .probe = tegra_i2c_probe, - .remove = tegra_i2c_remove, + .remove = __devexit_p(tegra_i2c_remove), #ifdef CONFIG_PM .suspend = tegra_i2c_suspend, .resume = tegra_i2c_resume, diff --git a/drivers/i2c/busses/i2c-versatile.c b/drivers/i2c/busses/i2c-versatile.c index 6055601..f585aea 100644 --- a/drivers/i2c/busses/i2c-versatile.c +++ b/drivers/i2c/busses/i2c-versatile.c @@ -16,6 +16,7 @@ #include <linux/platform_device.h> #include <linux/slab.h> #include <linux/io.h> +#include <linux/of_i2c.h> #define I2C_CONTROL 0x00 #define I2C_CONTROLS 0x00 @@ -99,6 +100,7 @@ static int i2c_versatile_probe(struct platform_device *dev) strlcpy(i2c->adap.name, "Versatile I2C adapter", sizeof(i2c->adap.name)); i2c->adap.algo_data = &i2c->algo; i2c->adap.dev.parent = &dev->dev; + i2c->adap.dev.of_node = dev->dev.of_node; i2c->algo = i2c_versatile_algo; i2c->algo.data = i2c; @@ -111,6 +113,7 @@ static int i2c_versatile_probe(struct platform_device *dev) ret = i2c_bit_add_bus(&i2c->adap); if (ret >= 0) { platform_set_drvdata(dev, i2c); + of_i2c_register_devices(&i2c->adap); return 0; } @@ -133,12 +136,19 @@ static int i2c_versatile_remove(struct platform_device *dev) return 0; } +static const struct of_device_id i2c_versatile_match[] = { + { .compatible = "arm,versatile-i2c", }, + {}, +}; +MODULE_DEVICE_TABLE(of, i2c_versatile_match); + static struct platform_driver i2c_versatile_driver = { .probe = i2c_versatile_probe, .remove = i2c_versatile_remove, .driver = { .name = "versatile-i2c", .owner = THIS_MODULE, + .of_match_table = i2c_versatile_match, }, }; diff --git a/drivers/i2c/busses/i2c-xlr.c b/drivers/i2c/busses/i2c-xlr.c new file mode 100644 index 0000000..96d3fab --- /dev/null +++ b/drivers/i2c/busses/i2c-xlr.c @@ -0,0 +1,278 @@ +/* + * Copyright 2011, Netlogic Microsystems Inc. + * Copyright 2004, Matt Porter <mporter@kernel.crashing.org> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/i2c.h> +#include <linux/io.h> +#include <linux/platform_device.h> + +/* XLR I2C REGISTERS */ +#define XLR_I2C_CFG 0x00 +#define XLR_I2C_CLKDIV 0x01 +#define XLR_I2C_DEVADDR 0x02 +#define XLR_I2C_ADDR 0x03 +#define XLR_I2C_DATAOUT 0x04 +#define XLR_I2C_DATAIN 0x05 +#define XLR_I2C_STATUS 0x06 +#define XLR_I2C_STARTXFR 0x07 +#define XLR_I2C_BYTECNT 0x08 +#define XLR_I2C_HDSTATIM 0x09 + +/* XLR I2C REGISTERS FLAGS */ +#define XLR_I2C_BUS_BUSY 0x01 +#define XLR_I2C_SDOEMPTY 0x02 +#define XLR_I2C_RXRDY 0x04 +#define XLR_I2C_ACK_ERR 0x08 +#define XLR_I2C_ARB_STARTERR 0x30 + +/* Register Values */ +#define XLR_I2C_CFG_ADDR 0xF8 +#define XLR_I2C_CFG_NOADDR 0xFA +#define XLR_I2C_STARTXFR_ND 0x02 /* No Data */ +#define XLR_I2C_STARTXFR_RD 0x01 /* Read */ +#define XLR_I2C_STARTXFR_WR 0x00 /* Write */ + +#define XLR_I2C_TIMEOUT 10 /* timeout per byte in msec */ + +/* + * On XLR/XLS, we need to use __raw_ IO to read the I2C registers + * because they are in the big-endian MMIO area on the SoC. + * + * The readl/writel implementation on XLR/XLS byteswaps, because + * those are for its little-endian PCI space (see arch/mips/Kconfig). + */ +static inline void xlr_i2c_wreg(u32 __iomem *base, unsigned int reg, u32 val) +{ + __raw_writel(val, base + reg); +} + +static inline u32 xlr_i2c_rdreg(u32 __iomem *base, unsigned int reg) +{ + return __raw_readl(base + reg); +} + +struct xlr_i2c_private { + struct i2c_adapter adap; + u32 __iomem *iobase; +}; + +static int xlr_i2c_tx(struct xlr_i2c_private *priv, u16 len, + u8 *buf, u16 addr) +{ + struct i2c_adapter *adap = &priv->adap; + unsigned long timeout, stoptime, checktime; + u32 i2c_status; + int pos, timedout; + u8 offset, byte; + + offset = buf[0]; + xlr_i2c_wreg(priv->iobase, XLR_I2C_ADDR, offset); + xlr_i2c_wreg(priv->iobase, XLR_I2C_DEVADDR, addr); + xlr_i2c_wreg(priv->iobase, XLR_I2C_CFG, XLR_I2C_CFG_ADDR); + xlr_i2c_wreg(priv->iobase, XLR_I2C_BYTECNT, len - 1); + + timeout = msecs_to_jiffies(XLR_I2C_TIMEOUT); + stoptime = jiffies + timeout; + timedout = 0; + pos = 1; +retry: + if (len == 1) { + xlr_i2c_wreg(priv->iobase, XLR_I2C_STARTXFR, + XLR_I2C_STARTXFR_ND); + } else { + xlr_i2c_wreg(priv->iobase, XLR_I2C_DATAOUT, buf[pos]); + xlr_i2c_wreg(priv->iobase, XLR_I2C_STARTXFR, + XLR_I2C_STARTXFR_WR); + } + + while (!timedout) { + checktime = jiffies; + i2c_status = xlr_i2c_rdreg(priv->iobase, XLR_I2C_STATUS); + + if (i2c_status & XLR_I2C_SDOEMPTY) { + pos++; + /* need to do a empty dataout after the last byte */ + byte = (pos < len) ? buf[pos] : 0; + xlr_i2c_wreg(priv->iobase, XLR_I2C_DATAOUT, byte); + + /* reset timeout on successful xmit */ + stoptime = jiffies + timeout; + } + timedout = time_after(checktime, stoptime); + + if (i2c_status & XLR_I2C_ARB_STARTERR) { + if (timedout) + break; + goto retry; + } + + if (i2c_status & XLR_I2C_ACK_ERR) + return -EIO; + + if ((i2c_status & XLR_I2C_BUS_BUSY) == 0 && pos >= len) + return 0; + } + dev_err(&adap->dev, "I2C transmit timeout\n"); + return -ETIMEDOUT; +} + +static int xlr_i2c_rx(struct xlr_i2c_private *priv, u16 len, u8 *buf, u16 addr) +{ + struct i2c_adapter *adap = &priv->adap; + u32 i2c_status; + unsigned long timeout, stoptime, checktime; + int nbytes, timedout; + u8 byte; + + xlr_i2c_wreg(priv->iobase, XLR_I2C_CFG, XLR_I2C_CFG_NOADDR); + xlr_i2c_wreg(priv->iobase, XLR_I2C_BYTECNT, len); + xlr_i2c_wreg(priv->iobase, XLR_I2C_DEVADDR, addr); + + timeout = msecs_to_jiffies(XLR_I2C_TIMEOUT); + stoptime = jiffies + timeout; + timedout = 0; + nbytes = 0; +retry: + xlr_i2c_wreg(priv->iobase, XLR_I2C_STARTXFR, XLR_I2C_STARTXFR_RD); + + while (!timedout) { + checktime = jiffies; + i2c_status = xlr_i2c_rdreg(priv->iobase, XLR_I2C_STATUS); + if (i2c_status & XLR_I2C_RXRDY) { + if (nbytes > len) + return -EIO; /* should not happen */ + + /* we need to do a dummy datain when nbytes == len */ + byte = xlr_i2c_rdreg(priv->iobase, XLR_I2C_DATAIN); + if (nbytes < len) + buf[nbytes] = byte; + nbytes++; + + /* reset timeout on successful read */ + stoptime = jiffies + timeout; + } + + timedout = time_after(checktime, stoptime); + if (i2c_status & XLR_I2C_ARB_STARTERR) { + if (timedout) + break; + goto retry; + } + + if (i2c_status & XLR_I2C_ACK_ERR) + return -EIO; + + if ((i2c_status & XLR_I2C_BUS_BUSY) == 0) + return 0; + } + + dev_err(&adap->dev, "I2C receive timeout\n"); + return -ETIMEDOUT; +} + +static int xlr_i2c_xfer(struct i2c_adapter *adap, + struct i2c_msg *msgs, int num) +{ + struct i2c_msg *msg; + int i; + int ret = 0; + struct xlr_i2c_private *priv = i2c_get_adapdata(adap); + + for (i = 0; ret == 0 && i < num; i++) { + msg = &msgs[i]; + if (msg->flags & I2C_M_RD) + ret = xlr_i2c_rx(priv, msg->len, &msg->buf[0], + msg->addr); + else + ret = xlr_i2c_tx(priv, msg->len, &msg->buf[0], + msg->addr); + } + + return (ret != 0) ? ret : num; +} + +static u32 xlr_func(struct i2c_adapter *adap) +{ + /* Emulate SMBUS over I2C */ + return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_I2C; +} + +static struct i2c_algorithm xlr_i2c_algo = { + .master_xfer = xlr_i2c_xfer, + .functionality = xlr_func, +}; + +static int __devinit xlr_i2c_probe(struct platform_device *pdev) +{ + struct xlr_i2c_private *priv; + struct resource *res; + int ret; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->iobase = devm_request_and_ioremap(&pdev->dev, res); + if (!priv->iobase) { + dev_err(&pdev->dev, "devm_request_and_ioremap failed\n"); + return -EBUSY; + } + + priv->adap.dev.parent = &pdev->dev; + priv->adap.owner = THIS_MODULE; + priv->adap.algo_data = priv; + priv->adap.algo = &xlr_i2c_algo; + priv->adap.nr = pdev->id; + priv->adap.class = I2C_CLASS_HWMON; + snprintf(priv->adap.name, sizeof(priv->adap.name), "xlr-i2c"); + + i2c_set_adapdata(&priv->adap, priv); + ret = i2c_add_numbered_adapter(&priv->adap); + if (ret < 0) { + dev_err(&priv->adap.dev, "Failed to add i2c bus.\n"); + return ret; + } + + platform_set_drvdata(pdev, priv); + dev_info(&priv->adap.dev, "Added I2C Bus.\n"); + return 0; +} + +static int __devexit xlr_i2c_remove(struct platform_device *pdev) +{ + struct xlr_i2c_private *priv; + + priv = platform_get_drvdata(pdev); + i2c_del_adapter(&priv->adap); + platform_set_drvdata(pdev, NULL); + return 0; +} + +static struct platform_driver xlr_i2c_driver = { + .probe = xlr_i2c_probe, + .remove = __devexit_p(xlr_i2c_remove), + .driver = { + .name = "xlr-i2cbus", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(xlr_i2c_driver); + +MODULE_AUTHOR("Ganesan Ramalingam <ganesanr@netlogicmicro.com>"); +MODULE_DESCRIPTION("XLR/XLS SoC I2C Controller driver"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:xlr-i2cbus"); diff --git a/drivers/i2c/i2c-boardinfo.c b/drivers/i2c/i2c-boardinfo.c index 10274ff..f24cc64 100644 --- a/drivers/i2c/i2c-boardinfo.c +++ b/drivers/i2c/i2c-boardinfo.c @@ -13,7 +13,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA. */ #include <linux/kernel.h> diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 1e56061..feb7dc3 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -14,7 +14,8 @@ You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + MA 02110-1301 USA. */ /* ------------------------------------------------------------------------- */ /* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi>. @@ -1386,8 +1387,10 @@ int i2c_master_send(const struct i2c_client *client, const char *buf, int count) ret = i2c_transfer(adap, &msg, 1); - /* If everything went ok (i.e. 1 msg transmitted), return #bytes - transmitted, else error code. */ + /* + * If everything went ok (i.e. 1 msg transmitted), return #bytes + * transmitted, else error code. + */ return (ret == 1) ? count : ret; } EXPORT_SYMBOL(i2c_master_send); @@ -1414,8 +1417,10 @@ int i2c_master_recv(const struct i2c_client *client, char *buf, int count) ret = i2c_transfer(adap, &msg, 1); - /* If everything went ok (i.e. 1 msg transmitted), return #bytes - transmitted, else error code. */ + /* + * If everything went ok (i.e. 1 msg received), return #bytes received, + * else error code. + */ return (ret == 1) ? count : ret; } EXPORT_SYMBOL(i2c_master_recv); diff --git a/drivers/i2c/i2c-core.h b/drivers/i2c/i2c-core.h index 9f9c57f..18a8fd2 100644 --- a/drivers/i2c/i2c-core.h +++ b/drivers/i2c/i2c-core.h @@ -13,7 +13,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA. */ #include <linux/rwsem.h> diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index 10e7f1e..4504832 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -17,7 +17,8 @@ You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + MA 02110-1301 USA. */ /* Note that this is a complete rewrite of Simon Vogl's i2c-dev module. diff --git a/drivers/i2c/i2c-smbus.c b/drivers/i2c/i2c-smbus.c index f61ccc1..9836d08 100644 --- a/drivers/i2c/i2c-smbus.c +++ b/drivers/i2c/i2c-smbus.c @@ -16,7 +16,8 @@ * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, + * MA 02110-1301 USA. */ #include <linux/kernel.h> diff --git a/drivers/i2c/muxes/pca9541.c b/drivers/i2c/muxes/pca9541.c index ed699c5..e0df9b6 100644 --- a/drivers/i2c/muxes/pca9541.c +++ b/drivers/i2c/muxes/pca9541.c @@ -393,18 +393,7 @@ static struct i2c_driver pca9541_driver = { .id_table = pca9541_id, }; -static int __init pca9541_init(void) -{ - return i2c_add_driver(&pca9541_driver); -} - -static void __exit pca9541_exit(void) -{ - i2c_del_driver(&pca9541_driver); -} - -module_init(pca9541_init); -module_exit(pca9541_exit); +module_i2c_driver(pca9541_driver); MODULE_AUTHOR("Guenter Roeck <guenter.roeck@ericsson.com>"); MODULE_DESCRIPTION("PCA9541 I2C master selector driver"); diff --git a/drivers/i2c/muxes/pca954x.c b/drivers/i2c/muxes/pca954x.c index 6f89536..0e37ef2 100644 --- a/drivers/i2c/muxes/pca954x.c +++ b/drivers/i2c/muxes/pca954x.c @@ -284,18 +284,7 @@ static struct i2c_driver pca954x_driver = { .id_table = pca954x_id, }; -static int __init pca954x_init(void) -{ - return i2c_add_driver(&pca954x_driver); -} - -static void __exit pca954x_exit(void) -{ - i2c_del_driver(&pca954x_driver); -} - -module_init(pca954x_init); -module_exit(pca954x_exit); +module_i2c_driver(pca954x_driver); MODULE_AUTHOR("Rodolfo Giometti <giometti@linux.it>"); MODULE_DESCRIPTION("PCA954x I2C mux/switch driver"); |