diff options
Diffstat (limited to 'drivers/ide/ide-timings.c')
-rw-r--r-- | drivers/ide/ide-timings.c | 183 |
1 files changed, 183 insertions, 0 deletions
diff --git a/drivers/ide/ide-timings.c b/drivers/ide/ide-timings.c new file mode 100644 index 0000000..ebef6d4 --- /dev/null +++ b/drivers/ide/ide-timings.c @@ -0,0 +1,183 @@ +/* + * Copyright (c) 1999-2001 Vojtech Pavlik + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * Should you need to contact me, the author, you can do so either by + * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail: + * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic + */ + +#include <linux/kernel.h> +#include <linux/hdreg.h> +#include <linux/ide.h> +#include <linux/module.h> + +/* + * PIO 0-5, MWDMA 0-2 and UDMA 0-6 timings (in nanoseconds). + * These were taken from ATA/ATAPI-6 standard, rev 0a, except + * for PIO 5, which is a nonstandard extension and UDMA6, which + * is currently supported only by Maxtor drives. + */ + +static struct ide_timing ide_timing[] = { + + { XFER_UDMA_6, 0, 0, 0, 0, 0, 0, 0, 15 }, + { XFER_UDMA_5, 0, 0, 0, 0, 0, 0, 0, 20 }, + { XFER_UDMA_4, 0, 0, 0, 0, 0, 0, 0, 30 }, + { XFER_UDMA_3, 0, 0, 0, 0, 0, 0, 0, 45 }, + + { XFER_UDMA_2, 0, 0, 0, 0, 0, 0, 0, 60 }, + { XFER_UDMA_1, 0, 0, 0, 0, 0, 0, 0, 80 }, + { XFER_UDMA_0, 0, 0, 0, 0, 0, 0, 0, 120 }, + + { XFER_MW_DMA_2, 25, 0, 0, 0, 70, 25, 120, 0 }, + { XFER_MW_DMA_1, 45, 0, 0, 0, 80, 50, 150, 0 }, + { XFER_MW_DMA_0, 60, 0, 0, 0, 215, 215, 480, 0 }, + + { XFER_SW_DMA_2, 60, 0, 0, 0, 120, 120, 240, 0 }, + { XFER_SW_DMA_1, 90, 0, 0, 0, 240, 240, 480, 0 }, + { XFER_SW_DMA_0, 120, 0, 0, 0, 480, 480, 960, 0 }, + + { XFER_PIO_5, 20, 50, 30, 100, 50, 30, 100, 0 }, + { XFER_PIO_4, 25, 70, 25, 120, 70, 25, 120, 0 }, + { XFER_PIO_3, 30, 80, 70, 180, 80, 70, 180, 0 }, + + { XFER_PIO_2, 30, 290, 40, 330, 100, 90, 240, 0 }, + { XFER_PIO_1, 50, 290, 93, 383, 125, 100, 383, 0 }, + { XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0 }, + + { XFER_PIO_SLOW, 120, 290, 240, 960, 290, 240, 960, 0 }, + + { 0xff } +}; + +struct ide_timing *ide_timing_find_mode(u8 speed) +{ + struct ide_timing *t; + + for (t = ide_timing; t->mode != speed; t++) + if (t->mode == 0xff) + return NULL; + return t; +} +EXPORT_SYMBOL_GPL(ide_timing_find_mode); + +#define ENOUGH(v, unit) (((v) - 1) / (unit) + 1) +#define EZ(v, unit) ((v) ? ENOUGH(v, unit) : 0) + +static void ide_timing_quantize(struct ide_timing *t, struct ide_timing *q, + int T, int UT) +{ + q->setup = EZ(t->setup * 1000, T); + q->act8b = EZ(t->act8b * 1000, T); + q->rec8b = EZ(t->rec8b * 1000, T); + q->cyc8b = EZ(t->cyc8b * 1000, T); + q->active = EZ(t->active * 1000, T); + q->recover = EZ(t->recover * 1000, T); + q->cycle = EZ(t->cycle * 1000, T); + q->udma = EZ(t->udma * 1000, UT); +} + +void ide_timing_merge(struct ide_timing *a, struct ide_timing *b, + struct ide_timing *m, unsigned int what) +{ + if (what & IDE_TIMING_SETUP) + m->setup = max(a->setup, b->setup); + if (what & IDE_TIMING_ACT8B) + m->act8b = max(a->act8b, b->act8b); + if (what & IDE_TIMING_REC8B) + m->rec8b = max(a->rec8b, b->rec8b); + if (what & IDE_TIMING_CYC8B) + m->cyc8b = max(a->cyc8b, b->cyc8b); + if (what & IDE_TIMING_ACTIVE) + m->active = max(a->active, b->active); + if (what & IDE_TIMING_RECOVER) + m->recover = max(a->recover, b->recover); + if (what & IDE_TIMING_CYCLE) + m->cycle = max(a->cycle, b->cycle); + if (what & IDE_TIMING_UDMA) + m->udma = max(a->udma, b->udma); +} +EXPORT_SYMBOL_GPL(ide_timing_merge); + +int ide_timing_compute(ide_drive_t *drive, u8 speed, + struct ide_timing *t, int T, int UT) +{ + struct hd_driveid *id = drive->id; + struct ide_timing *s, p; + + /* + * Find the mode. + */ + s = ide_timing_find_mode(speed); + if (s == NULL) + return -EINVAL; + + /* + * Copy the timing from the table. + */ + *t = *s; + + /* + * If the drive is an EIDE drive, it can tell us it needs extended + * PIO/MWDMA cycle timing. + */ + if (id && id->field_valid & 2) { /* EIDE drive */ + + memset(&p, 0, sizeof(p)); + + if (speed <= XFER_PIO_2) + p.cycle = p.cyc8b = id->eide_pio; + else if (speed <= XFER_PIO_5) + p.cycle = p.cyc8b = id->eide_pio_iordy; + else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2) + p.cycle = id->eide_dma_min; + + ide_timing_merge(&p, t, t, IDE_TIMING_CYCLE | IDE_TIMING_CYC8B); + } + + /* + * Convert the timing to bus clock counts. + */ + ide_timing_quantize(t, t, T, UT); + + /* + * Even in DMA/UDMA modes we still use PIO access for IDENTIFY, + * S.M.A.R.T and some other commands. We have to ensure that the + * DMA cycle timing is slower/equal than the fastest PIO timing. + */ + if (speed >= XFER_SW_DMA_0) { + u8 pio = ide_get_best_pio_mode(drive, 255, 5); + ide_timing_compute(drive, XFER_PIO_0 + pio, &p, T, UT); + ide_timing_merge(&p, t, t, IDE_TIMING_ALL); + } + + /* + * Lengthen active & recovery time so that cycle time is correct. + */ + if (t->act8b + t->rec8b < t->cyc8b) { + t->act8b += (t->cyc8b - (t->act8b + t->rec8b)) / 2; + t->rec8b = t->cyc8b - t->act8b; + } + + if (t->active + t->recover < t->cycle) { + t->active += (t->cycle - (t->active + t->recover)) / 2; + t->recover = t->cycle - t->active; + } + + return 0; +} +EXPORT_SYMBOL_GPL(ide_timing_compute); |