diff options
Diffstat (limited to 'drivers/iio/light')
| -rw-r--r-- | drivers/iio/light/Kconfig | 32 | ||||
| -rw-r--r-- | drivers/iio/light/Makefile | 3 | ||||
| -rw-r--r-- | drivers/iio/light/adjd_s311.c | 77 | ||||
| -rw-r--r-- | drivers/iio/light/gp2ap020a00f.c | 1617 | ||||
| -rw-r--r-- | drivers/iio/light/hid-sensor-als.c | 7 | ||||
| -rw-r--r-- | drivers/iio/light/tcs3472.c | 367 | ||||
| -rw-r--r-- | drivers/iio/light/tsl4531.c | 258 |
7 files changed, 2303 insertions, 58 deletions
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig index bf9fa0d..0a25ae6 100644 --- a/drivers/iio/light/Kconfig +++ b/drivers/iio/light/Kconfig @@ -27,6 +27,18 @@ config APDS9300 To compile this driver as a module, choose M here: the module will be called apds9300. +config GP2AP020A00F + tristate "Sharp GP2AP020A00F Proximity/ALS sensor" + depends on I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say Y here if you have a Sharp GP2AP020A00F proximity/ALS combo-chip + hooked to an I2C bus. + + To compile this driver as a module, choose M here: the + module will be called gp2ap020a00f. + config HID_SENSOR_ALS depends on HID_SENSOR_HUB select IIO_BUFFER @@ -55,6 +67,16 @@ config SENSORS_LM3533 changes. The ALS-control output values can be set per zone for the three current output channels. +config TCS3472 + tristate "TAOS TCS3472 color light-to-digital converter" + depends on I2C + help + If you say yes here you get support for the TAOS TCS3472 + family of color light-to-digital converters with IR filter. + + This driver can also be built as a module. If so, the module + will be called tcs3472. + config SENSORS_TSL2563 tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors" depends on I2C @@ -65,6 +87,16 @@ config SENSORS_TSL2563 This driver can also be built as a module. If so, the module will be called tsl2563. +config TSL4531 + tristate "TAOS TSL4531 ambient light sensors" + depends on I2C + help + Say Y here if you want to build a driver for the TAOS TSL4531 family + of ambient light sensors with direct lux output. + + To compile this driver as a module, choose M here: the + module will be called tsl4531. + config VCNL4000 tristate "VCNL4000 combined ALS and proximity sensor" depends on I2C diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile index 354ee9a..cef590f 100644 --- a/drivers/iio/light/Makefile +++ b/drivers/iio/light/Makefile @@ -5,7 +5,10 @@ # When adding new entries keep the list in alphabetical order obj-$(CONFIG_ADJD_S311) += adjd_s311.o obj-$(CONFIG_APDS9300) += apds9300.o +obj-$(CONFIG_GP2AP020A00F) += gp2ap020a00f.o obj-$(CONFIG_HID_SENSOR_ALS) += hid-sensor-als.o obj-$(CONFIG_SENSORS_LM3533) += lm3533-als.o obj-$(CONFIG_SENSORS_TSL2563) += tsl2563.o +obj-$(CONFIG_TCS3472) += tcs3472.o +obj-$(CONFIG_TSL4531) += tsl4531.o obj-$(CONFIG_VCNL4000) += vcnl4000.o diff --git a/drivers/iio/light/adjd_s311.c b/drivers/iio/light/adjd_s311.c index 23cff79..83d15c5 100644 --- a/drivers/iio/light/adjd_s311.c +++ b/drivers/iio/light/adjd_s311.c @@ -114,43 +114,6 @@ static int adjd_s311_read_data(struct iio_dev *indio_dev, u8 reg, int *val) return 0; } -static ssize_t adjd_s311_read_int_time(struct iio_dev *indio_dev, - uintptr_t private, const struct iio_chan_spec *chan, char *buf) -{ - struct adjd_s311_data *data = iio_priv(indio_dev); - s32 ret; - - ret = i2c_smbus_read_word_data(data->client, - ADJD_S311_INT_REG(chan->address)); - if (ret < 0) - return ret; - - return sprintf(buf, "%d\n", ret & ADJD_S311_INT_MASK); -} - -static ssize_t adjd_s311_write_int_time(struct iio_dev *indio_dev, - uintptr_t private, const struct iio_chan_spec *chan, const char *buf, - size_t len) -{ - struct adjd_s311_data *data = iio_priv(indio_dev); - unsigned long int_time; - int ret; - - ret = kstrtoul(buf, 10, &int_time); - if (ret) - return ret; - - if (int_time > ADJD_S311_INT_MASK) - return -EINVAL; - - ret = i2c_smbus_write_word_data(data->client, - ADJD_S311_INT_REG(chan->address), int_time); - if (ret < 0) - return ret; - - return len; -} - static irqreturn_t adjd_s311_trigger_handler(int irq, void *p) { struct iio_poll_func *pf = p; @@ -175,10 +138,7 @@ static irqreturn_t adjd_s311_trigger_handler(int irq, void *p) len += 2; } - if (indio_dev->scan_timestamp) - *(s64 *)((u8 *)data->buffer + ALIGN(len, sizeof(s64))) - = time_ns; - iio_push_to_buffers(indio_dev, (u8 *)data->buffer); + iio_push_to_buffers_with_timestamp(indio_dev, data->buffer, time_ns); done: iio_trigger_notify_done(indio_dev->trig); @@ -186,25 +146,16 @@ done: return IRQ_HANDLED; } -static const struct iio_chan_spec_ext_info adjd_s311_ext_info[] = { - { - .name = "integration_time", - .read = adjd_s311_read_int_time, - .write = adjd_s311_write_int_time, - }, - { } -}; - #define ADJD_S311_CHANNEL(_color, _scan_idx) { \ .type = IIO_INTENSITY, \ .modified = 1, \ .address = (IDX_##_color), \ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \ - BIT(IIO_CHAN_INFO_HARDWAREGAIN), \ + BIT(IIO_CHAN_INFO_HARDWAREGAIN) | \ + BIT(IIO_CHAN_INFO_INT_TIME), \ .channel2 = (IIO_MOD_LIGHT_##_color), \ .scan_index = (_scan_idx), \ .scan_type = IIO_ST('u', 10, 16, 0), \ - .ext_info = adjd_s311_ext_info, \ } static const struct iio_chan_spec adjd_s311_channels[] = { @@ -236,6 +187,18 @@ static int adjd_s311_read_raw(struct iio_dev *indio_dev, return ret; *val = ret & ADJD_S311_CAP_MASK; return IIO_VAL_INT; + case IIO_CHAN_INFO_INT_TIME: + ret = i2c_smbus_read_word_data(data->client, + ADJD_S311_INT_REG(chan->address)); + if (ret < 0) + return ret; + *val = 0; + /* + * not documented, based on measurement: + * 4095 LSBs correspond to roughly 4 ms + */ + *val2 = ret & ADJD_S311_INT_MASK; + return IIO_VAL_INT_PLUS_MICRO; } return -EINVAL; } @@ -245,16 +208,20 @@ static int adjd_s311_write_raw(struct iio_dev *indio_dev, int val, int val2, long mask) { struct adjd_s311_data *data = iio_priv(indio_dev); - int ret; switch (mask) { case IIO_CHAN_INFO_HARDWAREGAIN: if (val < 0 || val > ADJD_S311_CAP_MASK) return -EINVAL; - ret = i2c_smbus_write_byte_data(data->client, + return i2c_smbus_write_byte_data(data->client, ADJD_S311_CAP_REG(chan->address), val); - return ret; + case IIO_CHAN_INFO_INT_TIME: + if (val != 0 || val2 < 0 || val2 > ADJD_S311_INT_MASK) + return -EINVAL; + + return i2c_smbus_write_word_data(data->client, + ADJD_S311_INT_REG(chan->address), val2); } return -EINVAL; } diff --git a/drivers/iio/light/gp2ap020a00f.c b/drivers/iio/light/gp2ap020a00f.c new file mode 100644 index 0000000..b1e4615 --- /dev/null +++ b/drivers/iio/light/gp2ap020a00f.c @@ -0,0 +1,1617 @@ +/* + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Jacek Anaszewski <j.anaszewski@samsung.com> + * + * IIO features supported by the driver: + * + * Read-only raw channels: + * - illiminance_clear [lux] + * - illiminance_ir + * - proximity + * + * Triggered buffer: + * - illiminance_clear + * - illiminance_ir + * - proximity + * + * Events: + * - illuminance_clear (rising and falling) + * - proximity (rising and falling) + * - both falling and rising thresholds for the proximity events + * must be set to the values greater than 0. + * + * The driver supports triggered buffers for all the three + * channels as well as high and low threshold events for the + * illuminance_clear and proxmimity channels. Triggers + * can be enabled simultaneously with both illuminance_clear + * events. Proximity events cannot be enabled simultaneously + * with any triggers or illuminance events. Enabling/disabling + * one of the proximity events automatically enables/disables + * the other one. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + */ + +#include <linux/debugfs.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/irq_work.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> +#include <linux/iio/buffer.h> +#include <linux/iio/events.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/trigger.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> + +#define GP2A_I2C_NAME "gp2ap020a00f" + +/* Registers */ +#define GP2AP020A00F_OP_REG 0x00 /* Basic operations */ +#define GP2AP020A00F_ALS_REG 0x01 /* ALS related settings */ +#define GP2AP020A00F_PS_REG 0x02 /* PS related settings */ +#define GP2AP020A00F_LED_REG 0x03 /* LED reg */ +#define GP2AP020A00F_TL_L_REG 0x04 /* ALS: Threshold low LSB */ +#define GP2AP020A00F_TL_H_REG 0x05 /* ALS: Threshold low MSB */ +#define GP2AP020A00F_TH_L_REG 0x06 /* ALS: Threshold high LSB */ +#define GP2AP020A00F_TH_H_REG 0x07 /* ALS: Threshold high MSB */ +#define GP2AP020A00F_PL_L_REG 0x08 /* PS: Threshold low LSB */ +#define GP2AP020A00F_PL_H_REG 0x09 /* PS: Threshold low MSB */ +#define GP2AP020A00F_PH_L_REG 0x0a /* PS: Threshold high LSB */ +#define GP2AP020A00F_PH_H_REG 0x0b /* PS: Threshold high MSB */ +#define GP2AP020A00F_D0_L_REG 0x0c /* ALS result: Clear/Illuminance LSB */ +#define GP2AP020A00F_D0_H_REG 0x0d /* ALS result: Clear/Illuminance MSB */ +#define GP2AP020A00F_D1_L_REG 0x0e /* ALS result: IR LSB */ +#define GP2AP020A00F_D1_H_REG 0x0f /* ALS result: IR LSB */ +#define GP2AP020A00F_D2_L_REG 0x10 /* PS result LSB */ +#define GP2AP020A00F_D2_H_REG 0x11 /* PS result MSB */ +#define GP2AP020A00F_NUM_REGS 0x12 /* Number of registers */ + +/* OP_REG bits */ +#define GP2AP020A00F_OP3_MASK 0x80 /* Software shutdown */ +#define GP2AP020A00F_OP3_SHUTDOWN 0x00 +#define GP2AP020A00F_OP3_OPERATION 0x80 +#define GP2AP020A00F_OP2_MASK 0x40 /* Auto shutdown/Continuous mode */ +#define GP2AP020A00F_OP2_AUTO_SHUTDOWN 0x00 +#define GP2AP020A00F_OP2_CONT_OPERATION 0x40 +#define GP2AP020A00F_OP_MASK 0x30 /* Operating mode selection */ +#define GP2AP020A00F_OP_ALS_AND_PS 0x00 +#define GP2AP020A00F_OP_ALS 0x10 +#define GP2AP020A00F_OP_PS 0x20 +#define GP2AP020A00F_OP_DEBUG 0x30 +#define GP2AP020A00F_PROX_MASK 0x08 /* PS: detection/non-detection */ +#define GP2AP020A00F_PROX_NON_DETECT 0x00 +#define GP2AP020A00F_PROX_DETECT 0x08 +#define GP2AP020A00F_FLAG_P 0x04 /* PS: interrupt result */ +#define GP2AP020A00F_FLAG_A 0x02 /* ALS: interrupt result */ +#define GP2AP020A00F_TYPE_MASK 0x01 /* Output data type selection */ +#define GP2AP020A00F_TYPE_MANUAL_CALC 0x00 +#define GP2AP020A00F_TYPE_AUTO_CALC 0x01 + +/* ALS_REG bits */ +#define GP2AP020A00F_PRST_MASK 0xc0 /* Number of measurement cycles */ +#define GP2AP020A00F_PRST_ONCE 0x00 +#define GP2AP020A00F_PRST_4_CYCLES 0x40 +#define GP2AP020A00F_PRST_8_CYCLES 0x80 +#define GP2AP020A00F_PRST_16_CYCLES 0xc0 +#define GP2AP020A00F_RES_A_MASK 0x38 /* ALS: Resolution */ +#define GP2AP020A00F_RES_A_800ms 0x00 +#define GP2AP020A00F_RES_A_400ms 0x08 +#define GP2AP020A00F_RES_A_200ms 0x10 +#define GP2AP020A00F_RES_A_100ms 0x18 +#define GP2AP020A00F_RES_A_25ms 0x20 +#define GP2AP020A00F_RES_A_6_25ms 0x28 +#define GP2AP020A00F_RES_A_1_56ms 0x30 +#define GP2AP020A00F_RES_A_0_39ms 0x38 +#define GP2AP020A00F_RANGE_A_MASK 0x07 /* ALS: Max measurable range */ +#define GP2AP020A00F_RANGE_A_x1 0x00 +#define GP2AP020A00F_RANGE_A_x2 0x01 +#define GP2AP020A00F_RANGE_A_x4 0x02 +#define GP2AP020A00F_RANGE_A_x8 0x03 +#define GP2AP020A00F_RANGE_A_x16 0x04 +#define GP2AP020A00F_RANGE_A_x32 0x05 +#define GP2AP020A00F_RANGE_A_x64 0x06 +#define GP2AP020A00F_RANGE_A_x128 0x07 + +/* PS_REG bits */ +#define GP2AP020A00F_ALC_MASK 0x80 /* Auto light cancel */ +#define GP2AP020A00F_ALC_ON 0x80 +#define GP2AP020A00F_ALC_OFF 0x00 +#define GP2AP020A00F_INTTYPE_MASK 0x40 /* Interrupt type setting */ +#define GP2AP020A00F_INTTYPE_LEVEL 0x00 +#define GP2AP020A00F_INTTYPE_PULSE 0x40 +#define GP2AP020A00F_RES_P_MASK 0x38 /* PS: Resolution */ +#define GP2AP020A00F_RES_P_800ms_x2 0x00 +#define GP2AP020A00F_RES_P_400ms_x2 0x08 +#define GP2AP020A00F_RES_P_200ms_x2 0x10 +#define GP2AP020A00F_RES_P_100ms_x2 0x18 +#define GP2AP020A00F_RES_P_25ms_x2 0x20 +#define GP2AP020A00F_RES_P_6_25ms_x2 0x28 +#define GP2AP020A00F_RES_P_1_56ms_x2 0x30 +#define GP2AP020A00F_RES_P_0_39ms_x2 0x38 +#define GP2AP020A00F_RANGE_P_MASK 0x07 /* PS: Max measurable range */ +#define GP2AP020A00F_RANGE_P_x1 0x00 +#define GP2AP020A00F_RANGE_P_x2 0x01 +#define GP2AP020A00F_RANGE_P_x4 0x02 +#define GP2AP020A00F_RANGE_P_x8 0x03 +#define GP2AP020A00F_RANGE_P_x16 0x04 +#define GP2AP020A00F_RANGE_P_x32 0x05 +#define GP2AP020A00F_RANGE_P_x64 0x06 +#define GP2AP020A00F_RANGE_P_x128 0x07 + +/* LED reg bits */ +#define GP2AP020A00F_INTVAL_MASK 0xc0 /* Intermittent operating */ +#define GP2AP020A00F_INTVAL_0 0x00 +#define GP2AP020A00F_INTVAL_4 0x40 +#define GP2AP020A00F_INTVAL_8 0x80 +#define GP2AP020A00F_INTVAL_16 0xc0 +#define GP2AP020A00F_IS_MASK 0x30 /* ILED drive peak current */ +#define GP2AP020A00F_IS_13_8mA 0x00 +#define GP2AP020A00F_IS_27_5mA 0x10 +#define GP2AP020A00F_IS_55mA 0x20 +#define GP2AP020A00F_IS_110mA 0x30 +#define GP2AP020A00F_PIN_MASK 0x0c /* INT terminal setting */ +#define GP2AP020A00F_PIN_ALS_OR_PS 0x00 +#define GP2AP020A00F_PIN_ALS 0x04 +#define GP2AP020A00F_PIN_PS 0x08 +#define GP2AP020A00F_PIN_PS_DETECT 0x0c +#define GP2AP020A00F_FREQ_MASK 0x02 /* LED modulation frequency */ +#define GP2AP020A00F_FREQ_327_5kHz 0x00 +#define GP2AP020A00F_FREQ_81_8kHz 0x02 +#define GP2AP020A00F_RST 0x01 /* Software reset */ + +#define GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR 0 +#define GP2AP020A00F_SCAN_MODE_LIGHT_IR 1 +#define GP2AP020A00F_SCAN_MODE_PROXIMITY 2 +#define GP2AP020A00F_CHAN_TIMESTAMP 3 + +#define GP2AP020A00F_DATA_READY_TIMEOUT msecs_to_jiffies(1000) +#define GP2AP020A00F_DATA_REG(chan) (GP2AP020A00F_D0_L_REG + \ + (chan) * 2) +#define GP2AP020A00F_THRESH_REG(th_val_id) (GP2AP020A00F_TL_L_REG + \ + (th_val_id) * 2) +#define GP2AP020A00F_THRESH_VAL_ID(reg_addr) ((reg_addr - 4) / 2) + +#define GP2AP020A00F_SUBTRACT_MODE 0 +#define GP2AP020A00F_ADD_MODE 1 + +#define GP2AP020A00F_MAX_CHANNELS 3 + +enum gp2ap020a00f_opmode { + GP2AP020A00F_OPMODE_READ_RAW_CLEAR, + GP2AP020A00F_OPMODE_READ_RAW_IR, + GP2AP020A00F_OPMODE_READ_RAW_PROXIMITY, + GP2AP020A00F_OPMODE_ALS, + GP2AP020A00F_OPMODE_PS, + GP2AP020A00F_OPMODE_ALS_AND_PS, + GP2AP020A00F_OPMODE_PROX_DETECT, + GP2AP020A00F_OPMODE_SHUTDOWN, + GP2AP020A00F_NUM_OPMODES, +}; + +enum gp2ap020a00f_cmd { + GP2AP020A00F_CMD_READ_RAW_CLEAR, + GP2AP020A00F_CMD_READ_RAW_IR, + GP2AP020A00F_CMD_READ_RAW_PROXIMITY, + GP2AP020A00F_CMD_TRIGGER_CLEAR_EN, + GP2AP020A00F_CMD_TRIGGER_CLEAR_DIS, + GP2AP020A00F_CMD_TRIGGER_IR_EN, + GP2AP020A00F_CMD_TRIGGER_IR_DIS, + GP2AP020A00F_CMD_TRIGGER_PROX_EN, + GP2AP020A00F_CMD_TRIGGER_PROX_DIS, + GP2AP020A00F_CMD_ALS_HIGH_EV_EN, + GP2AP020A00F_CMD_ALS_HIGH_EV_DIS, + GP2AP020A00F_CMD_ALS_LOW_EV_EN, + GP2AP020A00F_CMD_ALS_LOW_EV_DIS, + GP2AP020A00F_CMD_PROX_HIGH_EV_EN, + GP2AP020A00F_CMD_PROX_HIGH_EV_DIS, + GP2AP020A00F_CMD_PROX_LOW_EV_EN, + GP2AP020A00F_CMD_PROX_LOW_EV_DIS, +}; + +enum gp2ap020a00f_flags { + GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER, + GP2AP020A00F_FLAG_ALS_IR_TRIGGER, + GP2AP020A00F_FLAG_PROX_TRIGGER, + GP2AP020A00F_FLAG_PROX_RISING_EV, + GP2AP020A00F_FLAG_PROX_FALLING_EV, + GP2AP020A00F_FLAG_ALS_RISING_EV, + GP2AP020A00F_FLAG_ALS_FALLING_EV, + GP2AP020A00F_FLAG_LUX_MODE_HI, + GP2AP020A00F_FLAG_DATA_READY, +}; + +enum gp2ap020a00f_thresh_val_id { + GP2AP020A00F_THRESH_TL, + GP2AP020A00F_THRESH_TH, + GP2AP020A00F_THRESH_PL, + GP2AP020A00F_THRESH_PH, +}; + +struct gp2ap020a00f_data { + const struct gp2ap020a00f_platform_data *pdata; + struct i2c_client *client; + struct mutex lock; + char *buffer; + struct regulator *vled_reg; + unsigned long flags; + enum gp2ap020a00f_opmode cur_opmode; + struct iio_trigger *trig; + struct regmap *regmap; + unsigned int thresh_val[4]; + u8 debug_reg_addr; + struct irq_work work; + wait_queue_head_t data_ready_queue; +}; + +static const u8 gp2ap020a00f_reg_init_tab[] = { + [GP2AP020A00F_OP_REG] = GP2AP020A00F_OP3_SHUTDOWN, + [GP2AP020A00F_ALS_REG] = GP2AP020A00F_RES_A_25ms | + GP2AP020A00F_RANGE_A_x8, + [GP2AP020A00F_PS_REG] = GP2AP020A00F_ALC_ON | + GP2AP020A00F_RES_P_1_56ms_x2 | + GP2AP020A00F_RANGE_P_x4, + [GP2AP020A00F_LED_REG] = GP2AP020A00F_INTVAL_0 | + GP2AP020A00F_IS_110mA | + GP2AP020A00F_FREQ_327_5kHz, + [GP2AP020A00F_TL_L_REG] = 0, + [GP2AP020A00F_TL_H_REG] = 0, + [GP2AP020A00F_TH_L_REG] = 0, + [GP2AP020A00F_TH_H_REG] = 0, + [GP2AP020A00F_PL_L_REG] = 0, + [GP2AP020A00F_PL_H_REG] = 0, + [GP2AP020A00F_PH_L_REG] = 0, + [GP2AP020A00F_PH_H_REG] = 0, +}; + +static bool gp2ap020a00f_is_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case GP2AP020A00F_OP_REG: + case GP2AP020A00F_D0_L_REG: + case GP2AP020A00F_D0_H_REG: + case GP2AP020A00F_D1_L_REG: + case GP2AP020A00F_D1_H_REG: + case GP2AP020A00F_D2_L_REG: + case GP2AP020A00F_D2_H_REG: + return true; + default: + return false; + } +} + +static const struct regmap_config gp2ap020a00f_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + + .max_register = GP2AP020A00F_D2_H_REG, + .cache_type = REGCACHE_RBTREE, + + .volatile_reg = gp2ap020a00f_is_volatile_reg, +}; + +static const struct gp2ap020a00f_mutable_config_regs { + u8 op_reg; + u8 als_reg; + u8 ps_reg; + u8 led_reg; +} opmode_regs_settings[GP2AP020A00F_NUM_OPMODES] = { + [GP2AP020A00F_OPMODE_READ_RAW_CLEAR] = { + GP2AP020A00F_OP_ALS | GP2AP020A00F_OP2_CONT_OPERATION + | GP2AP020A00F_OP3_OPERATION + | GP2AP020A00F_TYPE_AUTO_CALC, + GP2AP020A00F_PRST_ONCE, + GP2AP020A00F_INTTYPE_LEVEL, + GP2AP020A00F_PIN_ALS + }, + [GP2AP020A00F_OPMODE_READ_RAW_IR] = { + GP2AP020A00F_OP_ALS | GP2AP020A00F_OP2_CONT_OPERATION + | GP2AP020A00F_OP3_OPERATION + | GP2AP020A00F_TYPE_MANUAL_CALC, + GP2AP020A00F_PRST_ONCE, + GP2AP020A00F_INTTYPE_LEVEL, + GP2AP020A00F_PIN_ALS + }, + [GP2AP020A00F_OPMODE_READ_RAW_PROXIMITY] = { + GP2AP020A00F_OP_PS | GP2AP020A00F_OP2_CONT_OPERATION + | GP2AP020A00F_OP3_OPERATION + | GP2AP020A00F_TYPE_MANUAL_CALC, + GP2AP020A00F_PRST_ONCE, + GP2AP020A00F_INTTYPE_LEVEL, + GP2AP020A00F_PIN_PS + }, + [GP2AP020A00F_OPMODE_PROX_DETECT] = { + GP2AP020A00F_OP_PS | GP2AP020A00F_OP2_CONT_OPERATION + | GP2AP020A00F_OP3_OPERATION + | GP2AP020A00F_TYPE_MANUAL_CALC, + GP2AP020A00F_PRST_4_CYCLES, + GP2AP020A00F_INTTYPE_PULSE, + GP2AP020A00F_PIN_PS_DETECT + }, + [GP2AP020A00F_OPMODE_ALS] = { + GP2AP020A00F_OP_ALS | GP2AP020A00F_OP2_CONT_OPERATION + | GP2AP020A00F_OP3_OPERATION + | GP2AP020A00F_TYPE_AUTO_CALC, + GP2AP020A00F_PRST_ONCE, + GP2AP020A00F_INTTYPE_LEVEL, + GP2AP020A00F_PIN_ALS + }, + [GP2AP020A00F_OPMODE_PS] = { + GP2AP020A00F_OP_PS | GP2AP020A00F_OP2_CONT_OPERATION + | GP2AP020A00F_OP3_OPERATION + | GP2AP020A00F_TYPE_MANUAL_CALC, + GP2AP020A00F_PRST_4_CYCLES, + GP2AP020A00F_INTTYPE_LEVEL, + GP2AP020A00F_PIN_PS + }, + [GP2AP020A00F_OPMODE_ALS_AND_PS] = { + GP2AP020A00F_OP_ALS_AND_PS + | GP2AP020A00F_OP2_CONT_OPERATION + | GP2AP020A00F_OP3_OPERATION + | GP2AP020A00F_TYPE_AUTO_CALC, + GP2AP020A00F_PRST_4_CYCLES, + GP2AP020A00F_INTTYPE_LEVEL, + GP2AP020A00F_PIN_ALS_OR_PS + }, + [GP2AP020A00F_OPMODE_SHUTDOWN] = { GP2AP020A00F_OP3_SHUTDOWN, }, +}; + +static int gp2ap020a00f_set_operation_mode(struct gp2ap020a00f_data *data, + enum gp2ap020a00f_opmode op) +{ + unsigned int op_reg_val; + int err; + + if (op != GP2AP020A00F_OPMODE_SHUTDOWN) { + err = regmap_read(data->regmap, GP2AP020A00F_OP_REG, + &op_reg_val); + if (err < 0) + return err; + /* + * Shutdown the device if the operation being executed entails + * mode transition. + */ + if ((opmode_regs_settings[op].op_reg & GP2AP020A00F_OP_MASK) != + (op_reg_val & GP2AP020A00F_OP_MASK)) { + /* set shutdown mode */ + err = regmap_update_bits(data->regmap, + GP2AP020A00F_OP_REG, GP2AP020A00F_OP3_MASK, + GP2AP020A00F_OP3_SHUTDOWN); + if (err < 0) + return err; + } + + err = regmap_update_bits(data->regmap, GP2AP020A00F_ALS_REG, + GP2AP020A00F_PRST_MASK, opmode_regs_settings[op] + .als_reg); + if (err < 0) + return err; + + err = regmap_update_bits(data->regmap, GP2AP020A00F_PS_REG, + GP2AP020A00F_INTTYPE_MASK, opmode_regs_settings[op] + .ps_reg); + if (err < 0) + return err; + + err = regmap_update_bits(data->regmap, GP2AP020A00F_LED_REG, + GP2AP020A00F_PIN_MASK, opmode_regs_settings[op] + .led_reg); + if (err < 0) + return err; + } + + /* Set OP_REG and apply operation mode (power on / off) */ + err = regmap_update_bits(data->regmap, + GP2AP020A00F_OP_REG, + GP2AP020A00F_OP_MASK | GP2AP020A00F_OP2_MASK | + GP2AP020A00F_OP3_MASK | GP2AP020A00F_TYPE_MASK, + opmode_regs_settings[op].op_reg); + if (err < 0) + return err; + + data->cur_opmode = op; + + return 0; +} + +static bool gp2ap020a00f_als_enabled(struct gp2ap020a00f_data *data) +{ + return test_bit(GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER, &data->flags) || + test_bit(GP2AP020A00F_FLAG_ALS_IR_TRIGGER, &data->flags) || + test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags) || + test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags); +} + +static bool gp2ap020a00f_prox_detect_enabled(struct gp2ap020a00f_data *data) +{ + return test_bit(GP2AP020A00F_FLAG_PROX_RISING_EV, &data->flags) || + test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV, &data->flags); +} + +static int gp2ap020a00f_write_event_threshold(struct gp2ap020a00f_data *data, + enum gp2ap020a00f_thresh_val_id th_val_id, + bool enable) +{ + __le16 thresh_buf = 0; + unsigned int thresh_reg_val; + + if (!enable) + thresh_reg_val = 0; + else if (test_bit(GP2AP020A00F_FLAG_LUX_MODE_HI, &data->flags) && + th_val_id != GP2AP020A00F_THRESH_PL && + th_val_id != GP2AP020A00F_THRESH_PH) + /* + * For the high lux mode ALS threshold has to be scaled down + * to allow for proper comparison with the output value. + */ + thresh_reg_val = data->thresh_val[th_val_id] / 16; + else + thresh_reg_val = data->thresh_val[th_val_id] > 16000 ? + 16000 : + data->thresh_val[th_val_id]; + + thresh_buf = cpu_to_le16(thresh_reg_val); + + return regmap_bulk_write(data->regmap, + GP2AP020A00F_THRESH_REG(th_val_id), + (u8 *)&thresh_buf, 2); +} + +static int gp2ap020a00f_alter_opmode(struct gp2ap020a00f_data *data, + enum gp2ap020a00f_opmode diff_mode, int add_sub) +{ + enum gp2ap020a00f_opmode new_mode; + + if (diff_mode != GP2AP020A00F_OPMODE_ALS && + diff_mode != GP2AP020A00F_OPMODE_PS) + return -EINVAL; + + if (add_sub == GP2AP020A00F_ADD_MODE) { + if (data->cur_opmode == GP2AP020A00F_OPMODE_SHUTDOWN) + new_mode = diff_mode; + else + new_mode = GP2AP020A00F_OPMODE_ALS_AND_PS; + } else { + if (data->cur_opmode == GP2AP020A00F_OPMODE_ALS_AND_PS) + new_mode = (diff_mode == GP2AP020A00F_OPMODE_ALS) ? + GP2AP020A00F_OPMODE_PS : + GP2AP020A00F_OPMODE_ALS; + else + new_mode = GP2AP020A00F_OPMODE_SHUTDOWN; + } + + return gp2ap020a00f_set_operation_mode(data, new_mode); +} + +static int gp2ap020a00f_exec_cmd(struct gp2ap020a00f_data *data, + enum gp2ap020a00f_cmd cmd) +{ + int err = 0; + + switch (cmd) { + case GP2AP020A00F_CMD_READ_RAW_CLEAR: + if (data->cur_opmode != GP2AP020A00F_OPMODE_SHUTDOWN) + return -EBUSY; + err = gp2ap020a00f_set_operation_mode(data, + GP2AP020A00F_OPMODE_READ_RAW_CLEAR); + break; + case GP2AP020A00F_CMD_READ_RAW_IR: + if (data->cur_opmode != GP2AP020A00F_OPMODE_SHUTDOWN) + return -EBUSY; + err = gp2ap020a00f_set_operation_mode(data, + GP2AP020A00F_OPMODE_READ_RAW_IR); + break; + case GP2AP020A00F_CMD_READ_RAW_PROXIMITY: + if (data->cur_opmode != GP2AP020A00F_OPMODE_SHUTDOWN) + return -EBUSY; + err = gp2ap020a00f_set_operation_mode(data, + GP2AP020A00F_OPMODE_READ_RAW_PROXIMITY); + break; + case GP2AP020A00F_CMD_TRIGGER_CLEAR_EN: + if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT) + return -EBUSY; + if (!gp2ap020a00f_als_enabled(data)) + err = gp2ap020a00f_alter_opmode(data, + GP2AP020A00F_OPMODE_ALS, + GP2AP020A00F_ADD_MODE); + set_bit(GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER, &data->flags); + break; + case GP2AP020A00F_CMD_TRIGGER_CLEAR_DIS: + clear_bit(GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER, &data->flags); + if (gp2ap020a00f_als_enabled(data)) + break; + err = gp2ap020a00f_alter_opmode(data, + GP2AP020A00F_OPMODE_ALS, + GP2AP020A00F_SUBTRACT_MODE); + break; + case GP2AP020A00F_CMD_TRIGGER_IR_EN: + if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT) + return -EBUSY; + if (!gp2ap020a00f_als_enabled(data)) + err = gp2ap020a00f_alter_opmode(data, + GP2AP020A00F_OPMODE_ALS, + GP2AP020A00F_ADD_MODE); + set_bit(GP2AP020A00F_FLAG_ALS_IR_TRIGGER, &data->flags); + break; + case GP2AP020A00F_CMD_TRIGGER_IR_DIS: + clear_bit(GP2AP020A00F_FLAG_ALS_IR_TRIGGER, &data->flags); + if (gp2ap020a00f_als_enabled(data)) + break; + err = gp2ap020a00f_alter_opmode(data, + GP2AP020A00F_OPMODE_ALS, + GP2AP020A00F_SUBTRACT_MODE); + break; + case GP2AP020A00F_CMD_TRIGGER_PROX_EN: + if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT) + return -EBUSY; + err = gp2ap020a00f_alter_opmode(data, + GP2AP020A00F_OPMODE_PS, + GP2AP020A00F_ADD_MODE); + set_bit(GP2AP020A00F_FLAG_PROX_TRIGGER, &data->flags); + break; + case GP2AP020A00F_CMD_TRIGGER_PROX_DIS: + clear_bit(GP2AP020A00F_FLAG_PROX_TRIGGER, &data->flags); + err = gp2ap020a00f_alter_opmode(data, + GP2AP020A00F_OPMODE_PS, + GP2AP020A00F_SUBTRACT_MODE); + break; + case GP2AP020A00F_CMD_ALS_HIGH_EV_EN: + if (test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags)) + return 0; + if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT) + return -EBUSY; + if (!gp2ap020a00f_als_enabled(data)) { + err = gp2ap020a00f_alter_opmode(data, + GP2AP020A00F_OPMODE_ALS, + GP2AP020A00F_ADD_MODE); + if (err < 0) + return err; + } + set_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags); + err = gp2ap020a00f_write_event_threshold(data, + GP2AP020A00F_THRESH_TH, true); + break; + case GP2AP020A00F_CMD_ALS_HIGH_EV_DIS: + if (!test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags)) + return 0; + clear_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags); + if (!gp2ap020a00f_als_enabled(data)) { + err = gp2ap020a00f_alter_opmode(data, + GP2AP020A00F_OPMODE_ALS, + GP2AP020A00F_SUBTRACT_MODE); + if (err < 0) + return err; + } + err = gp2ap020a00f_write_event_threshold(data, + GP2AP020A00F_THRESH_TH, false); + break; + case GP2AP020A00F_CMD_ALS_LOW_EV_EN: + if (test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags)) + return 0; + if (data->cur_opmode == GP2AP020A00F_OPMODE_PROX_DETECT) + return -EBUSY; + if (!gp2ap020a00f_als_enabled(data)) { + err = gp2ap020a00f_alter_opmode(data, + GP2AP020A00F_OPMODE_ALS, + GP2AP020A00F_ADD_MODE); + if (err < 0) + return err; + } + set_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags); + err = gp2ap020a00f_write_event_threshold(data, + GP2AP020A00F_THRESH_TL, true); + break; + case GP2AP020A00F_CMD_ALS_LOW_EV_DIS: + if (!test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags)) + return 0; + clear_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags); + if (!gp2ap020a00f_als_enabled(data)) { + err = gp2ap020a00f_alter_opmode(data, + GP2AP020A00F_OPMODE_ALS, + GP2AP020A00F_SUBTRACT_MODE); + if (err < 0) + return err; + } + err = gp2ap020a00f_write_event_threshold(data, + GP2AP020A00F_THRESH_TL, false); + break; + case GP2AP020A00F_CMD_PROX_HIGH_EV_EN: + if (test_bit(GP2AP020A00F_FLAG_PROX_RISING_EV, &data->flags)) + return 0; + if (gp2ap020a00f_als_enabled(data) || + data->cur_opmode == GP2AP020A00F_OPMODE_PS) + return -EBUSY; + if (!gp2ap020a00f_prox_detect_enabled(data)) { + err = gp2ap020a00f_set_operation_mode(data, + GP2AP020A00F_OPMODE_PROX_DETECT); + if (err < 0) + return err; + } + set_bit(GP2AP020A00F_FLAG_PROX_RISING_EV, &data->flags); + err = gp2ap020a00f_write_event_threshold(data, + GP2AP020A00F_THRESH_PH, true); + break; + case GP2AP020A00F_CMD_PROX_HIGH_EV_DIS: + if (!test_bit(GP2AP020A00F_FLAG_PROX_RISING_EV, &data->flags)) + return 0; + clear_bit(GP2AP020A00F_FLAG_PROX_RISING_EV, &data->flags); + err = gp2ap020a00f_set_operation_mode(data, + GP2AP020A00F_OPMODE_SHUTDOWN); + if (err < 0) + return err; + err = gp2ap020a00f_write_event_threshold(data, + GP2AP020A00F_THRESH_PH, false); + break; + case GP2AP020A00F_CMD_PROX_LOW_EV_EN: + if (test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV, &data->flags)) + return 0; + if (gp2ap020a00f_als_enabled(data) || + data->cur_opmode == GP2AP020A00F_OPMODE_PS) + return -EBUSY; + if (!gp2ap020a00f_prox_detect_enabled(data)) { + err = gp2ap020a00f_set_operation_mode(data, + GP2AP020A00F_OPMODE_PROX_DETECT); + if (err < 0) + return err; + } + set_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV, &data->flags); + err = gp2ap020a00f_write_event_threshold(data, + GP2AP020A00F_THRESH_PL, true); + break; + case GP2AP020A00F_CMD_PROX_LOW_EV_DIS: + if (!test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV, &data->flags)) + return 0; + clear_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV, &data->flags); + err = gp2ap020a00f_set_operation_mode(data, + GP2AP020A00F_OPMODE_SHUTDOWN); + if (err < 0) + return err; + err = gp2ap020a00f_write_event_threshold(data, + GP2AP020A00F_THRESH_PL, false); + break; + } + + return err; +} + +static int wait_conversion_complete_irq(struct gp2ap020a00f_data *data) +{ + int ret; + + ret = wait_event_timeout(data->data_ready_queue, + test_bit(GP2AP020A00F_FLAG_DATA_READY, + &data->flags), + GP2AP020A00F_DATA_READY_TIMEOUT); + clear_bit(GP2AP020A00F_FLAG_DATA_READY, &data->flags); + + return ret > 0 ? 0 : -ETIME; +} + +static int gp2ap020a00f_read_output(struct gp2ap020a00f_data *data, + unsigned int output_reg, int *val) +{ + u8 reg_buf[2]; + int err; + + err = wait_conversion_complete_irq(data); + if (err < 0) + dev_dbg(&data->client->dev, "data ready timeout\n"); + + err = regmap_bulk_read(data->regmap, output_reg, reg_buf, 2); + if (err < 0) + return err; + + *val = le16_to_cpup((__le16 *)reg_buf); + + return err; +} + +static bool gp2ap020a00f_adjust_lux_mode(struct gp2ap020a00f_data *data, + int output_val) +{ + u8 new_range = 0xff; + int err; + + if (!test_bit(GP2AP020A00F_FLAG_LUX_MODE_HI, &data->flags)) { + if (output_val > 16000) { + set_bit(GP2AP020A00F_FLAG_LUX_MODE_HI, &data->flags); + new_range = GP2AP020A00F_RANGE_A_x128; + } + } else { + if (output_val < 1000) { + clear_bit(GP2AP020A00F_FLAG_LUX_MODE_HI, &data->flags); + new_range = GP2AP020A00F_RANGE_A_x8; + } + } + + if (new_range != 0xff) { + /* Clear als threshold registers to avoid spurious + * events caused by lux mode transition. + */ + err = gp2ap020a00f_write_event_threshold(data, + GP2AP020A00F_THRESH_TH, false); + if (err < 0) { + dev_err(&data->client->dev, + "Clearing als threshold register failed.\n"); + return false; + } + + err = gp2ap020a00f_write_event_threshold(data, + GP2AP020A00F_THRESH_TL, false); + if (err < 0) { + dev_err(&data->client->dev, + "Clearing als threshold register failed.\n"); + return false; + } + + /* Change lux mode */ + err = regmap_update_bits(data->regmap, + GP2AP020A00F_OP_REG, + GP2AP020A00F_OP3_MASK, + GP2AP020A00F_OP3_SHUTDOWN); + + if (err < 0) { + dev_err(&data->client->dev, + "Shutting down the device failed.\n"); + return false; + } + + err = regmap_update_bits(data->regmap, + GP2AP020A00F_ALS_REG, + GP2AP020A00F_RANGE_A_MASK, + new_range); + + if (err < 0) { + dev_err(&data->client->dev, + "Adjusting device lux mode failed.\n"); + return false; + } + + err = regmap_update_bits(data->regmap, + GP2AP020A00F_OP_REG, + GP2AP020A00F_OP3_MASK, + GP2AP020A00F_OP3_OPERATION); + + if (err < 0) { + dev_err(&data->client->dev, + "Powering up the device failed.\n"); + return false; + } + + /* Adjust als threshold register values to the new lux mode */ + if (test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &data->flags)) { + err = gp2ap020a00f_write_event_threshold(data, + GP2AP020A00F_THRESH_TH, true); + if (err < 0) { + dev_err(&data->client->dev, + "Adjusting als threshold value failed.\n"); + return false; + } + } + + if (test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &data->flags)) { + err = gp2ap020a00f_write_event_threshold(data, + GP2AP020A00F_THRESH_TL, true); + if (err < 0) { + dev_err(&data->client->dev, + "Adjusting als threshold value failed.\n"); + return false; + } + } + + return true; + } + + return false; +} + +static void gp2ap020a00f_output_to_lux(struct gp2ap020a00f_data *data, + int *output_val) +{ + if (test_bit(GP2AP020A00F_FLAG_LUX_MODE_HI, &data->flags)) + *output_val *= 16; +} + +static void gp2ap020a00f_iio_trigger_work(struct irq_work *work) +{ + struct gp2ap020a00f_data *data = + container_of(work, struct gp2ap020a00f_data, work); + + iio_trigger_poll(data->trig, 0); +} + +static irqreturn_t gp2ap020a00f_prox_sensing_handler(int irq, void *data) +{ + struct iio_dev *indio_dev = data; + struct gp2ap020a00f_data *priv = iio_priv(indio_dev); + unsigned int op_reg_val; + int ret; + + /* Read interrupt flags */ + ret = regmap_read(priv->regmap, GP2AP020A00F_OP_REG, &op_reg_val); + if (ret < 0) + return IRQ_HANDLED; + + if (gp2ap020a00f_prox_detect_enabled(priv)) { + if (op_reg_val & GP2AP020A00F_PROX_DETECT) { + iio_push_event(indio_dev, + IIO_UNMOD_EVENT_CODE( + IIO_PROXIMITY, + GP2AP020A00F_SCAN_MODE_PROXIMITY, + IIO_EV_TYPE_ROC, + IIO_EV_DIR_RISING), + iio_get_time_ns()); + } else { + iio_push_event(indio_dev, + IIO_UNMOD_EVENT_CODE( + IIO_PROXIMITY, + GP2AP020A00F_SCAN_MODE_PROXIMITY, + IIO_EV_TYPE_ROC, + IIO_EV_DIR_FALLING), + iio_get_time_ns()); + } + } + + return IRQ_HANDLED; +} + +static irqreturn_t gp2ap020a00f_thresh_event_handler(int irq, void *data) +{ + struct iio_dev *indio_dev = data; + struct gp2ap020a00f_data *priv = iio_priv(indio_dev); + u8 op_reg_flags, d0_reg_buf[2]; + unsigned int output_val, op_reg_val; + int thresh_val_id, ret; + + /* Read interrupt flags */ + ret = regmap_read(priv->regmap, GP2AP020A00F_OP_REG, + &op_reg_val); + if (ret < 0) + goto done; + + op_reg_flags = op_reg_val & (GP2AP020A00F_FLAG_A | GP2AP020A00F_FLAG_P + | GP2AP020A00F_PROX_DETECT); + + op_reg_val &= (~GP2AP020A00F_FLAG_A & ~GP2AP020A00F_FLAG_P + & ~GP2AP020A00F_PROX_DETECT); + + /* Clear interrupt flags (if not in INTTYPE_PULSE mode) */ + if (priv->cur_opmode != GP2AP020A00F_OPMODE_PROX_DETECT) { + ret = regmap_write(priv->regmap, GP2AP020A00F_OP_REG, + op_reg_val); + if (ret < 0) + goto done; + } + + if (op_reg_flags & GP2AP020A00F_FLAG_A) { + /* Check D0 register to assess if the lux mode + * transition is required. + */ + ret = regmap_bulk_read(priv->regmap, GP2AP020A00F_D0_L_REG, + d0_reg_buf, 2); + if (ret < 0) + goto done; + + output_val = le16_to_cpup((__le16 *)d0_reg_buf); + + if (gp2ap020a00f_adjust_lux_mode(priv, output_val)) + goto done; + + gp2ap020a00f_output_to_lux(priv, &output_val); + + /* + * We need to check output value to distinguish + * between high and low ambient light threshold event. + */ + if (test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, &priv->flags)) { + thresh_val_id = + GP2AP020A00F_THRESH_VAL_ID(GP2AP020A00F_TH_L_REG); + if (output_val > priv->thresh_val[thresh_val_id]) + iio_push_event(indio_dev, + IIO_MOD_EVENT_CODE( + IIO_LIGHT, + GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR, + IIO_MOD_LIGHT_CLEAR, + IIO_EV_TYPE_THRESH, + IIO_EV_DIR_RISING), + iio_get_time_ns()); + } + + if (test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, &priv->flags)) { + thresh_val_id = + GP2AP020A00F_THRESH_VAL_ID(GP2AP020A00F_TL_L_REG); + if (output_val < priv->thresh_val[thresh_val_id]) + iio_push_event(indio_dev, + IIO_MOD_EVENT_CODE( + IIO_LIGHT, + GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR, + IIO_MOD_LIGHT_CLEAR, + IIO_EV_TYPE_THRESH, + IIO_EV_DIR_FALLING), + iio_get_time_ns()); + } + } + + if (priv->cur_opmode == GP2AP020A00F_OPMODE_READ_RAW_CLEAR || + priv->cur_opmode == GP2AP020A00F_OPMODE_READ_RAW_IR || + priv->cur_opmode == GP2AP020A00F_OPMODE_READ_RAW_PROXIMITY) { + set_bit(GP2AP020A00F_FLAG_DATA_READY, &priv->flags); + wake_up(&priv->data_ready_queue); + goto done; + } + + if (test_bit(GP2AP020A00F_FLAG_ALS_CLEAR_TRIGGER, &priv->flags) || + test_bit(GP2AP020A00F_FLAG_ALS_IR_TRIGGER, &priv->flags) || + test_bit(GP2AP020A00F_FLAG_PROX_TRIGGER, &priv->flags)) + /* This fires off the trigger. */ + irq_work_queue(&priv->work); + +done: + return IRQ_HANDLED; +} + +static irqreturn_t gp2ap020a00f_trigger_handler(int irq, void *data) +{ + struct iio_poll_func *pf = data; + struct iio_dev *indio_dev = pf->indio_dev; + struct gp2ap020a00f_data *priv = iio_priv(indio_dev); + size_t d_size = 0; + __le32 light_lux; + int i, out_val, ret; + + for_each_set_bit(i, indio_dev->active_scan_mask, + indio_dev->masklength) { + ret = regmap_bulk_read(priv->regmap, + GP2AP020A00F_DATA_REG(i), + &priv->buffer[d_size], 2); + if (ret < 0) + goto done; + + if (i == GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR || + i == GP2AP020A00F_SCAN_MODE_LIGHT_IR) { + out_val = le16_to_cpup((__le16 *)&priv->buffer[d_size]); + gp2ap020a00f_output_to_lux(priv, &out_val); + light_lux = cpu_to_le32(out_val); + memcpy(&priv->buffer[d_size], (u8 *)&light_lux, 4); + d_size += 4; + } else { + d_size += 2; + } + } + + iio_push_to_buffers_with_timestamp(indio_dev, priv->buffer, + pf->timestamp); +done: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static u8 gp2ap020a00f_get_reg_by_event_code(u64 event_code) +{ + int event_dir = IIO_EVENT_CODE_EXTRACT_DIR(event_code); + + switch (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code)) { + case IIO_PROXIMITY: + if (event_dir == IIO_EV_DIR_RISING) + return GP2AP020A00F_PH_L_REG; + else + return GP2AP020A00F_PL_L_REG; + case IIO_LIGHT: + if (event_dir == IIO_EV_DIR_RISING) + return GP2AP020A00F_TH_L_REG; + else + return GP2AP020A00F_TL_L_REG; + } + + return -EINVAL; +} + +static int gp2ap020a00f_write_event_val(struct iio_dev *indio_dev, + u64 event_code, int val) +{ + struct gp2ap020a00f_data *data = iio_priv(indio_dev); + bool event_en = false; + u8 thresh_val_id; + u8 thresh_reg_l; + int err = 0; + + mutex_lock(&data->lock); + + thresh_reg_l = gp2ap020a00f_get_reg_by_event_code(event_code); + thresh_val_id = GP2AP020A00F_THRESH_VAL_ID(thresh_reg_l); + + if (thresh_val_id > GP2AP020A00F_THRESH_PH) { + err = -EINVAL; + goto error_unlock; + } + + switch (thresh_reg_l) { + case GP2AP020A00F_TH_L_REG: + event_en = test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, + &data->flags); + break; + case GP2AP020A00F_TL_L_REG: + event_en = test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, + &data->flags); + break; + case GP2AP020A00F_PH_L_REG: + if (val == 0) { + err = -EINVAL; + goto error_unlock; + } + event_en = test_bit(GP2AP020A00F_FLAG_PROX_RISING_EV, + &data->flags); + break; + case GP2AP020A00F_PL_L_REG: + if (val == 0) { + err = -EINVAL; + goto error_unlock; + } + event_en = test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV, + &data->flags); + break; + } + + data->thresh_val[thresh_val_id] = val; + err = gp2ap020a00f_write_event_threshold(data, thresh_val_id, + event_en); +error_unlock: + mutex_unlock(&data->lock); + + return err; +} + +static int gp2ap020a00f_read_event_val(struct iio_dev *indio_dev, + u64 event_code, int *val) +{ + struct gp2ap020a00f_data *data = iio_priv(indio_dev); + u8 thresh_reg_l; + int err = 0; + + mutex_lock(&data->lock); + + thresh_reg_l = gp2ap020a00f_get_reg_by_event_code(event_code); + + if (thresh_reg_l > GP2AP020A00F_PH_L_REG) { + err = -EINVAL; + goto error_unlock; + } + + *val = data->thresh_val[GP2AP020A00F_THRESH_VAL_ID(thresh_reg_l)]; + +error_unlock: + mutex_unlock(&data->lock); + + return err; +} + +static int gp2ap020a00f_write_prox_event_config(struct iio_dev *indio_dev, + u64 event_code, int state) +{ + struct gp2ap020a00f_data *data = iio_priv(indio_dev); + enum gp2ap020a00f_cmd cmd_high_ev, cmd_low_ev; + int err; + + cmd_high_ev = state ? GP2AP020A00F_CMD_PROX_HIGH_EV_EN : + GP2AP020A00F_CMD_PROX_HIGH_EV_DIS; + cmd_low_ev = state ? GP2AP020A00F_CMD_PROX_LOW_EV_EN : + GP2AP020A00F_CMD_PROX_LOW_EV_DIS; + + /* + * In order to enable proximity detection feature in the device + * both high and low threshold registers have to be written + * with different values, greater than zero. + */ + if (state) { + if (data->thresh_val[GP2AP020A00F_THRESH_PL] == 0) + return -EINVAL; + + if (data->thresh_val[GP2AP020A00F_THRESH_PH] == 0) + return -EINVAL; + } + + err = gp2ap020a00f_exec_cmd(data, cmd_high_ev); + if (err < 0) + return err; + + err = gp2ap020a00f_exec_cmd(data, cmd_low_ev); + if (err < 0) + return err; + + free_irq(data->client->irq, indio_dev); + + if (state) + err = request_threaded_irq(data->client->irq, NULL, + &gp2ap020a00f_prox_sensing_handler, + IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING | + IRQF_ONESHOT, + "gp2ap020a00f_prox_sensing", + indio_dev); + else { + err = request_threaded_irq(data->client->irq, NULL, + &gp2ap020a00f_thresh_event_handler, + IRQF_TRIGGER_FALLING | + IRQF_ONESHOT, + "gp2ap020a00f_thresh_event", + indio_dev); + } + + return err; +} + +static int gp2ap020a00f_write_event_config(struct iio_dev *indio_dev, + u64 event_code, int state) +{ + struct gp2ap020a00f_data *data = iio_priv(indio_dev); + enum gp2ap020a00f_cmd cmd; + int err; + + mutex_lock(&data->lock); + + switch (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code)) { + case IIO_PROXIMITY: + err = gp2ap020a00f_write_prox_event_config(indio_dev, + event_code, state); + break; + case IIO_LIGHT: + if (IIO_EVENT_CODE_EXTRACT_DIR(event_code) + == IIO_EV_DIR_RISING) { + cmd = state ? GP2AP020A00F_CMD_ALS_HIGH_EV_EN : + GP2AP020A00F_CMD_ALS_HIGH_EV_DIS; + err = gp2ap020a00f_exec_cmd(data, cmd); + } else { + cmd = state ? GP2AP020A00F_CMD_ALS_LOW_EV_EN : + GP2AP020A00F_CMD_ALS_LOW_EV_DIS; + err = gp2ap020a00f_exec_cmd(data, cmd); + } + break; + default: + err = -EINVAL; + } + + mutex_unlock(&data->lock); + + return err; +} + +static int gp2ap020a00f_read_event_config(struct iio_dev *indio_dev, + u64 event_code) +{ + struct gp2ap020a00f_data *data = iio_priv(indio_dev); + int event_en = 0; + + mutex_lock(&data->lock); + + switch (IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(event_code)) { + case IIO_PROXIMITY: + if (IIO_EVENT_CODE_EXTRACT_DIR(event_code) + == IIO_EV_DIR_RISING) + event_en = test_bit(GP2AP020A00F_FLAG_PROX_RISING_EV, + &data->flags); + else + event_en = test_bit(GP2AP020A00F_FLAG_PROX_FALLING_EV, + &data->flags); + break; + case IIO_LIGHT: + if (IIO_EVENT_CODE_EXTRACT_DIR(event_code) + == IIO_EV_DIR_RISING) + event_en = test_bit(GP2AP020A00F_FLAG_ALS_RISING_EV, + &data->flags); + else + event_en = test_bit(GP2AP020A00F_FLAG_ALS_FALLING_EV, + &data->flags); + break; + } + + mutex_unlock(&data->lock); + + return event_en; +} + +static int gp2ap020a00f_read_channel(struct gp2ap020a00f_data *data, + struct iio_chan_spec const *chan, int *val) +{ + enum gp2ap020a00f_cmd cmd; + int err; + + switch (chan->scan_index) { + case GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR: + cmd = GP2AP020A00F_CMD_READ_RAW_CLEAR; + break; + case GP2AP020A00F_SCAN_MODE_LIGHT_IR: + cmd = GP2AP020A00F_CMD_READ_RAW_IR; + break; + case GP2AP020A00F_SCAN_MODE_PROXIMITY: + cmd = GP2AP020A00F_CMD_READ_RAW_PROXIMITY; + break; + default: + return -EINVAL; + } + + err = gp2ap020a00f_exec_cmd(data, cmd); + if (err < 0) { + dev_err(&data->client->dev, + "gp2ap020a00f_exec_cmd failed\n"); + goto error_ret; + } + + err = gp2ap020a00f_read_output(data, chan->address, val); + if (err < 0) + dev_err(&data->client->dev, + "gp2ap020a00f_read_output failed\n"); + + err = gp2ap020a00f_set_operation_mode(data, + GP2AP020A00F_OPMODE_SHUTDOWN); + if (err < 0) + dev_err(&data->client->dev, + "Failed to shut down the device.\n"); + + if (cmd == GP2AP020A00F_CMD_READ_RAW_CLEAR || + cmd == GP2AP020A00F_CMD_READ_RAW_IR) + gp2ap020a00f_output_to_lux(data, val); + +error_ret: + return err; +} + +static int gp2ap020a00f_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, + long mask) +{ + struct gp2ap020a00f_data *data = iio_priv(indio_dev); + int err = -EINVAL; + + mutex_lock(&data->lock); + + switch (mask) { + case IIO_CHAN_INFO_RAW: + if (iio_buffer_enabled(indio_dev)) { + err = -EBUSY; + goto error_unlock; + } + + err = gp2ap020a00f_read_channel(data, chan, val); + break; + } + +error_unlock: + mutex_unlock(&data->lock); + + return err < 0 ? err : IIO_VAL_INT; +} + +static const struct iio_chan_spec gp2ap020a00f_channels[] = { + { + .type = IIO_LIGHT, + .channel2 = IIO_MOD_LIGHT_CLEAR, + .modified = 1, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .scan_type = { + .sign = 'u', + .realbits = 24, + .shift = 0, + .storagebits = 32, + .endianness = IIO_LE, + }, + .scan_index = GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR, + .address = GP2AP020A00F_D0_L_REG, + .event_mask = IIO_EV_BIT(IIO_EV_TYPE_THRESH, + IIO_EV_DIR_RISING) | + IIO_EV_BIT(IIO_EV_TYPE_THRESH, + IIO_EV_DIR_FALLING), + }, + { + .type = IIO_LIGHT, + .channel2 = IIO_MOD_LIGHT_IR, + .modified = 1, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .scan_type = { + .sign = 'u', + .realbits = 24, + .shift = 0, + .storagebits = 32, + .endianness = IIO_LE, + }, + .scan_index = GP2AP020A00F_SCAN_MODE_LIGHT_IR, + .address = GP2AP020A00F_D1_L_REG, + }, + { + .type = IIO_PROXIMITY, + .modified = 0, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .scan_type = { + .sign = 'u', + .realbits = 16, + .shift = 0, + .storagebits = 16, + .endianness = IIO_LE, + }, + .scan_index = GP2AP020A00F_SCAN_MODE_PROXIMITY, + .address = GP2AP020A00F_D2_L_REG, + .event_mask = IIO_EV_BIT(IIO_EV_TYPE_ROC, + IIO_EV_DIR_RISING) | + IIO_EV_BIT(IIO_EV_TYPE_ROC, + IIO_EV_DIR_FALLING), + }, + IIO_CHAN_SOFT_TIMESTAMP(GP2AP020A00F_CHAN_TIMESTAMP), +}; + +static const struct iio_info gp2ap020a00f_info = { + .read_raw = &gp2ap020a00f_read_raw, + .read_event_value = &gp2ap020a00f_read_event_val, + .read_event_config = &gp2ap020a00f_read_event_config, + .write_event_value = &gp2ap020a00f_write_event_val, + .write_event_config = &gp2ap020a00f_write_event_config, + .driver_module = THIS_MODULE, +}; + +static int gp2ap020a00f_buffer_postenable(struct iio_dev *indio_dev) +{ + struct gp2ap020a00f_data *data = iio_priv(indio_dev); + int i, err = 0; + + mutex_lock(&data->lock); + + /* + * Enable triggers according to the scan_mask. Enabling either + * LIGHT_CLEAR or LIGHT_IR scan mode results in enabling ALS + * module in the device, which generates samples in both D0 (clear) + * and D1 (ir) registers. As the two registers are bound to the + * two separate IIO channels they are treated in the driver logic + * as if they were controlled independently. + */ + for_each_set_bit(i, indio_dev->active_scan_mask, + indio_dev->masklength) { + switch (i) { + case GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR: + err = gp2ap020a00f_exec_cmd(data, + GP2AP020A00F_CMD_TRIGGER_CLEAR_EN); + break; + case GP2AP020A00F_SCAN_MODE_LIGHT_IR: + err = gp2ap020a00f_exec_cmd(data, + GP2AP020A00F_CMD_TRIGGER_IR_EN); + break; + case GP2AP020A00F_SCAN_MODE_PROXIMITY: + err = gp2ap020a00f_exec_cmd(data, + GP2AP020A00F_CMD_TRIGGER_PROX_EN); + break; + } + } + + if (err < 0) + goto error_unlock; + + data->buffer = kmalloc(indio_dev->scan_bytes, GFP_KERNEL); + if (!data->buffer) { + err = -ENOMEM; + goto error_unlock; + } + + err = iio_triggered_buffer_postenable(indio_dev); + +error_unlock: + mutex_unlock(&data->lock); + + return err; +} + +static int gp2ap020a00f_buffer_predisable(struct iio_dev *indio_dev) +{ + struct gp2ap020a00f_data *data = iio_priv(indio_dev); + int i, err; + + mutex_lock(&data->lock); + + err = iio_triggered_buffer_predisable(indio_dev); + if (err < 0) + goto error_unlock; + + for_each_set_bit(i, indio_dev->active_scan_mask, + indio_dev->masklength) { + switch (i) { + case GP2AP020A00F_SCAN_MODE_LIGHT_CLEAR: + err = gp2ap020a00f_exec_cmd(data, + GP2AP020A00F_CMD_TRIGGER_CLEAR_DIS); + break; + case GP2AP020A00F_SCAN_MODE_LIGHT_IR: + err = gp2ap020a00f_exec_cmd(data, + GP2AP020A00F_CMD_TRIGGER_IR_DIS); + break; + case GP2AP020A00F_SCAN_MODE_PROXIMITY: + err = gp2ap020a00f_exec_cmd(data, + GP2AP020A00F_CMD_TRIGGER_PROX_DIS); + break; + } + } + + if (err == 0) + kfree(data->buffer); + +error_unlock: + mutex_unlock(&data->lock); + + return err; +} + +static const struct iio_buffer_setup_ops gp2ap020a00f_buffer_setup_ops = { + .preenable = &iio_sw_buffer_preenable, + .postenable = &gp2ap020a00f_buffer_postenable, + .predisable = &gp2ap020a00f_buffer_predisable, +}; + +static const struct iio_trigger_ops gp2ap020a00f_trigger_ops = { + .owner = THIS_MODULE, +}; + +static int gp2ap020a00f_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct gp2ap020a00f_data *data; + struct iio_dev *indio_dev; + struct regmap *regmap; + int err; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + + data->vled_reg = devm_regulator_get(&client->dev, "vled"); + if (IS_ERR(data->vled_reg)) + return PTR_ERR(data->vled_reg); + + err = regulator_enable(data->vled_reg); + if (err) + return err; + + regmap = devm_regmap_init_i2c(client, &gp2ap020a00f_regmap_config); + if (IS_ERR(regmap)) { + dev_err(&client->dev, "Regmap initialization failed.\n"); + err = PTR_ERR(regmap); + goto error_regulator_disable; + } + + /* Initialize device registers */ + err = regmap_bulk_write(regmap, GP2AP020A00F_OP_REG, + gp2ap020a00f_reg_init_tab, + ARRAY_SIZE(gp2ap020a00f_reg_init_tab)); + + if (err < 0) { + dev_err(&client->dev, "Device initialization failed.\n"); + goto error_regulator_disable; + } + + i2c_set_clientdata(client, indio_dev); + + data->client = client; + data->cur_opmode = GP2AP020A00F_OPMODE_SHUTDOWN; + data->regmap = regmap; + init_waitqueue_head(&data->data_ready_queue); + + mutex_init(&data->lock); + indio_dev->dev.parent = &client->dev; + indio_dev->channels = gp2ap020a00f_channels; + indio_dev->num_channels = ARRAY_SIZE(gp2ap020a00f_channels); + indio_dev->info = &gp2ap020a00f_info; + indio_dev->name = id->name; + indio_dev->modes = INDIO_DIRECT_MODE; + + /* Allocate buffer */ + err = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, + &gp2ap020a00f_trigger_handler, &gp2ap020a00f_buffer_setup_ops); + if (err < 0) + goto error_regulator_disable; + + /* Allocate trigger */ + data->trig = devm_iio_trigger_alloc(&client->dev, "%s-trigger", + indio_dev->name); + if (data->trig == NULL) { + err = -ENOMEM; + dev_err(&indio_dev->dev, "Failed to allocate iio trigger.\n"); + goto error_uninit_buffer; + } + + /* This needs to be requested here for read_raw calls to work. */ + err = request_threaded_irq(client->irq, NULL, + &gp2ap020a00f_thresh_event_handler, + IRQF_TRIGGER_FALLING | + IRQF_ONESHOT, + "gp2ap020a00f_als_event", + indio_dev); + if (err < 0) { + dev_err(&client->dev, "Irq request failed.\n"); + goto error_uninit_buffer; + } + + data->trig->ops = &gp2ap020a00f_trigger_ops; + data->trig->dev.parent = &data->client->dev; + + init_irq_work(&data->work, gp2ap020a00f_iio_trigger_work); + + err = iio_trigger_register(data->trig); + if (err < 0) { + dev_err(&client->dev, "Failed to register iio trigger.\n"); + goto error_free_irq; + } + + err = iio_device_register(indio_dev); + if (err < 0) + goto error_trigger_unregister; + + return 0; + +error_trigger_unregister: + iio_trigger_unregister(data->trig); +error_free_irq: + free_irq(client->irq, indio_dev); +error_uninit_buffer: + iio_triggered_buffer_cleanup(indio_dev); +error_regulator_disable: + regulator_disable(data->vled_reg); + + return err; +} + +static int gp2ap020a00f_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct gp2ap020a00f_data *data = iio_priv(indio_dev); + int err; + + err = gp2ap020a00f_set_operation_mode(data, + GP2AP020A00F_OPMODE_SHUTDOWN); + if (err < 0) + dev_err(&indio_dev->dev, "Failed to power off the device.\n"); + + iio_device_unregister(indio_dev); + iio_trigger_unregister(data->trig); + free_irq(client->irq, indio_dev); + iio_triggered_buffer_cleanup(indio_dev); + regulator_disable(data->vled_reg); + + return 0; +} + +static const struct i2c_device_id gp2ap020a00f_id[] = { + { GP2A_I2C_NAME, 0 }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, gp2ap020a00f_id); + +#ifdef CONFIG_OF +static const struct of_device_id gp2ap020a00f_of_match[] = { + { .compatible = "sharp,gp2ap020a00f" }, + { } +}; +#endif + +static struct i2c_driver gp2ap020a00f_driver = { + .driver = { + .name = GP2A_I2C_NAME, + .of_match_table = of_match_ptr(gp2ap020a00f_of_match), + .owner = THIS_MODULE, + }, + .probe = gp2ap020a00f_probe, + .remove = gp2ap020a00f_remove, + .id_table = gp2ap020a00f_id, +}; + +module_i2c_driver(gp2ap020a00f_driver); + +MODULE_AUTHOR("Jacek Anaszewski <j.anaszewski@samsung.com>"); +MODULE_DESCRIPTION("Sharp GP2AP020A00F Proximity/ALS sensor driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/light/hid-sensor-als.c b/drivers/iio/light/hid-sensor-als.c index e59d00c..fa6ae8c 100644 --- a/drivers/iio/light/hid-sensor-als.c +++ b/drivers/iio/light/hid-sensor-als.c @@ -161,10 +161,11 @@ static const struct iio_info als_info = { }; /* Function to push data to buffer */ -static void hid_sensor_push_data(struct iio_dev *indio_dev, u8 *data, int len) +static void hid_sensor_push_data(struct iio_dev *indio_dev, const void *data, + int len) { dev_dbg(&indio_dev->dev, "hid_sensor_push_data\n"); - iio_push_to_buffers(indio_dev, (u8 *)data); + iio_push_to_buffers(indio_dev, data); } /* Callback handler to send event after all samples are received and captured */ @@ -179,7 +180,7 @@ static int als_proc_event(struct hid_sensor_hub_device *hsdev, als_state->common_attributes.data_ready); if (als_state->common_attributes.data_ready) hid_sensor_push_data(indio_dev, - (u8 *)&als_state->illum, + &als_state->illum, sizeof(als_state->illum)); return 0; diff --git a/drivers/iio/light/tcs3472.c b/drivers/iio/light/tcs3472.c new file mode 100644 index 0000000..45df220 --- /dev/null +++ b/drivers/iio/light/tcs3472.c @@ -0,0 +1,367 @@ +/* + * tcs3472.c - Support for TAOS TCS3472 color light-to-digital converter + * + * Copyright (c) 2013 Peter Meerwald <pmeerw@pmeerw.net> + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * Color light sensor with 16-bit channels for red, green, blue, clear); + * 7-bit I2C slave address 0x39 (TCS34721, TCS34723) or 0x29 (TCS34725, + * TCS34727) + * + * TODO: interrupt support, thresholds, wait time + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/delay.h> +#include <linux/pm.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/buffer.h> +#include <linux/iio/triggered_buffer.h> + +#define TCS3472_DRV_NAME "tcs3472" + +#define TCS3472_COMMAND BIT(7) +#define TCS3472_AUTO_INCR BIT(5) + +#define TCS3472_ENABLE (TCS3472_COMMAND | 0x00) +#define TCS3472_ATIME (TCS3472_COMMAND | 0x01) +#define TCS3472_WTIME (TCS3472_COMMAND | 0x03) +#define TCS3472_AILT (TCS3472_COMMAND | 0x04) +#define TCS3472_AIHT (TCS3472_COMMAND | 0x06) +#define TCS3472_PERS (TCS3472_COMMAND | 0x0c) +#define TCS3472_CONFIG (TCS3472_COMMAND | 0x0d) +#define TCS3472_CONTROL (TCS3472_COMMAND | 0x0f) +#define TCS3472_ID (TCS3472_COMMAND | 0x12) +#define TCS3472_STATUS (TCS3472_COMMAND | 0x13) +#define TCS3472_CDATA (TCS3472_COMMAND | TCS3472_AUTO_INCR | 0x14) +#define TCS3472_RDATA (TCS3472_COMMAND | TCS3472_AUTO_INCR | 0x16) +#define TCS3472_GDATA (TCS3472_COMMAND | TCS3472_AUTO_INCR | 0x18) +#define TCS3472_BDATA (TCS3472_COMMAND | TCS3472_AUTO_INCR | 0x1a) + +#define TCS3472_STATUS_AVALID BIT(0) +#define TCS3472_ENABLE_AEN BIT(1) +#define TCS3472_ENABLE_PON BIT(0) +#define TCS3472_CONTROL_AGAIN_MASK (BIT(0) | BIT(1)) + +struct tcs3472_data { + struct i2c_client *client; + u8 enable; + u8 control; + u8 atime; + u16 buffer[8]; /* 4 16-bit channels + 64-bit timestamp */ +}; + +#define TCS3472_CHANNEL(_color, _si, _addr) { \ + .type = IIO_INTENSITY, \ + .modified = 1, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_CALIBSCALE) | \ + BIT(IIO_CHAN_INFO_INT_TIME), \ + .channel2 = IIO_MOD_LIGHT_##_color, \ + .address = _addr, \ + .scan_index = _si, \ + .scan_type = IIO_ST('u', 16, 16, 0), \ +} + +static const int tcs3472_agains[] = { 1, 4, 16, 60 }; + +static const struct iio_chan_spec tcs3472_channels[] = { + TCS3472_CHANNEL(CLEAR, 0, TCS3472_CDATA), + TCS3472_CHANNEL(RED, 1, TCS3472_RDATA), + TCS3472_CHANNEL(GREEN, 2, TCS3472_GDATA), + TCS3472_CHANNEL(BLUE, 3, TCS3472_BDATA), + IIO_CHAN_SOFT_TIMESTAMP(4), +}; + +static int tcs3472_req_data(struct tcs3472_data *data) +{ + int tries = 50; + int ret; + + while (tries--) { + ret = i2c_smbus_read_byte_data(data->client, TCS3472_STATUS); + if (ret < 0) + return ret; + if (ret & TCS3472_STATUS_AVALID) + break; + msleep(20); + } + + if (tries < 0) { + dev_err(&data->client->dev, "data not ready\n"); + return -EIO; + } + + return 0; +} + +static int tcs3472_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct tcs3472_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = tcs3472_req_data(data); + if (ret < 0) + return ret; + ret = i2c_smbus_read_word_data(data->client, chan->address); + if (ret < 0) + return ret; + *val = ret; + return IIO_VAL_INT; + case IIO_CHAN_INFO_CALIBSCALE: + *val = tcs3472_agains[data->control & + TCS3472_CONTROL_AGAIN_MASK]; + return IIO_VAL_INT; + case IIO_CHAN_INFO_INT_TIME: + *val = 0; + *val2 = (256 - data->atime) * 2400; + return IIO_VAL_INT_PLUS_MICRO; + } + return -EINVAL; +} + +static int tcs3472_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct tcs3472_data *data = iio_priv(indio_dev); + int i; + + switch (mask) { + case IIO_CHAN_INFO_CALIBSCALE: + if (val2 != 0) + return -EINVAL; + for (i = 0; i < ARRAY_SIZE(tcs3472_agains); i++) { + if (val == tcs3472_agains[i]) { + data->control &= ~TCS3472_CONTROL_AGAIN_MASK; + data->control |= i; + return i2c_smbus_write_byte_data( + data->client, TCS3472_CONTROL, + data->control); + } + } + return -EINVAL; + case IIO_CHAN_INFO_INT_TIME: + if (val != 0) + return -EINVAL; + for (i = 0; i < 256; i++) { + if (val2 == (256 - i) * 2400) { + data->atime = i; + return i2c_smbus_write_word_data( + data->client, TCS3472_ATIME, + data->atime); + } + + } + return -EINVAL; + } + return -EINVAL; +} + +static irqreturn_t tcs3472_trigger_handler(int irq, void *p) +{ + struct iio_poll_func *pf = p; + struct iio_dev *indio_dev = pf->indio_dev; + struct tcs3472_data *data = iio_priv(indio_dev); + int len = 0; + int i, j = 0; + + int ret = tcs3472_req_data(data); + if (ret < 0) + goto done; + + for_each_set_bit(i, indio_dev->active_scan_mask, + indio_dev->masklength) { + ret = i2c_smbus_read_word_data(data->client, + TCS3472_CDATA + 2*i); + if (ret < 0) + goto done; + + data->buffer[j++] = ret; + len += 2; + } + + iio_push_to_buffers_with_timestamp(indio_dev, data->buffer, + iio_get_time_ns()); + +done: + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static ssize_t tcs3472_show_int_time_available(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + size_t len = 0; + int i; + + for (i = 1; i <= 256; i++) + len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06d ", + 2400 * i); + + /* replace trailing space by newline */ + buf[len - 1] = '\n'; + + return len; +} + +static IIO_CONST_ATTR(calibscale_available, "1 4 16 60"); +static IIO_DEV_ATTR_INT_TIME_AVAIL(tcs3472_show_int_time_available); + +static struct attribute *tcs3472_attributes[] = { + &iio_const_attr_calibscale_available.dev_attr.attr, + &iio_dev_attr_integration_time_available.dev_attr.attr, + NULL +}; + +static const struct attribute_group tcs3472_attribute_group = { + .attrs = tcs3472_attributes, +}; + +static const struct iio_info tcs3472_info = { + .read_raw = tcs3472_read_raw, + .write_raw = tcs3472_write_raw, + .attrs = &tcs3472_attribute_group, + .driver_module = THIS_MODULE, +}; + +static int tcs3472_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct tcs3472_data *data; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (indio_dev == NULL) + return -ENOMEM; + + data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + data->client = client; + + indio_dev->dev.parent = &client->dev; + indio_dev->info = &tcs3472_info; + indio_dev->name = TCS3472_DRV_NAME; + indio_dev->channels = tcs3472_channels; + indio_dev->num_channels = ARRAY_SIZE(tcs3472_channels); + indio_dev->modes = INDIO_DIRECT_MODE; + + ret = i2c_smbus_read_byte_data(data->client, TCS3472_ID); + if (ret < 0) + return ret; + + if (ret == 0x44) + dev_info(&client->dev, "TCS34721/34725 found\n"); + else if (ret == 0x4d) + dev_info(&client->dev, "TCS34723/34727 found\n"); + else + return -ENODEV; + + ret = i2c_smbus_read_byte_data(data->client, TCS3472_CONTROL); + if (ret < 0) + return ret; + data->control = ret; + + ret = i2c_smbus_read_byte_data(data->client, TCS3472_ATIME); + if (ret < 0) + return ret; + data->atime = ret; + + ret = i2c_smbus_read_byte_data(data->client, TCS3472_ENABLE); + if (ret < 0) + return ret; + + /* enable device */ + data->enable = ret | TCS3472_ENABLE_PON | TCS3472_ENABLE_AEN; + ret = i2c_smbus_write_byte_data(data->client, TCS3472_ENABLE, + data->enable); + if (ret < 0) + return ret; + + ret = iio_triggered_buffer_setup(indio_dev, NULL, + tcs3472_trigger_handler, NULL); + if (ret < 0) + return ret; + + ret = iio_device_register(indio_dev); + if (ret < 0) + goto buffer_cleanup; + + return 0; + +buffer_cleanup: + iio_triggered_buffer_cleanup(indio_dev); + return ret; +} + +static int tcs3472_powerdown(struct tcs3472_data *data) +{ + return i2c_smbus_write_byte_data(data->client, TCS3472_ENABLE, + data->enable & ~(TCS3472_ENABLE_AEN | TCS3472_ENABLE_PON)); +} + +static int tcs3472_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + + iio_device_unregister(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); + tcs3472_powerdown(iio_priv(indio_dev)); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int tcs3472_suspend(struct device *dev) +{ + struct tcs3472_data *data = iio_priv(i2c_get_clientdata( + to_i2c_client(dev))); + return tcs3472_powerdown(data); +} + +static int tcs3472_resume(struct device *dev) +{ + struct tcs3472_data *data = iio_priv(i2c_get_clientdata( + to_i2c_client(dev))); + return i2c_smbus_write_byte_data(data->client, TCS3472_ENABLE, + data->enable | (TCS3472_ENABLE_AEN | TCS3472_ENABLE_PON)); +} +#endif + +static SIMPLE_DEV_PM_OPS(tcs3472_pm_ops, tcs3472_suspend, tcs3472_resume); + +static const struct i2c_device_id tcs3472_id[] = { + { "tcs3472", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tcs3472_id); + +static struct i2c_driver tcs3472_driver = { + .driver = { + .name = TCS3472_DRV_NAME, + .pm = &tcs3472_pm_ops, + .owner = THIS_MODULE, + }, + .probe = tcs3472_probe, + .remove = tcs3472_remove, + .id_table = tcs3472_id, +}; +module_i2c_driver(tcs3472_driver); + +MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>"); +MODULE_DESCRIPTION("TCS3472 color light sensors driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/light/tsl4531.c b/drivers/iio/light/tsl4531.c new file mode 100644 index 0000000..a15006e --- /dev/null +++ b/drivers/iio/light/tsl4531.c @@ -0,0 +1,258 @@ +/* + * tsl4531.c - Support for TAOS TSL4531 ambient light sensor + * + * Copyright 2013 Peter Meerwald <pmeerw@pmeerw.net> + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * IIO driver for the TSL4531x family + * TSL45311/TSL45313: 7-bit I2C slave address 0x39 + * TSL45315/TSL45317: 7-bit I2C slave address 0x29 + * + * TODO: single cycle measurement + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/err.h> +#include <linux/delay.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> + +#define TSL4531_DRV_NAME "tsl4531" + +#define TCS3472_COMMAND BIT(7) + +#define TSL4531_CONTROL (TCS3472_COMMAND | 0x00) +#define TSL4531_CONFIG (TCS3472_COMMAND | 0x01) +#define TSL4531_DATA (TCS3472_COMMAND | 0x04) +#define TSL4531_ID (TCS3472_COMMAND | 0x0a) + +/* operating modes in control register */ +#define TSL4531_MODE_POWERDOWN 0x00 +#define TSL4531_MODE_SINGLE_ADC 0x02 +#define TSL4531_MODE_NORMAL 0x03 + +/* integration time control in config register */ +#define TSL4531_TCNTRL_400MS 0x00 +#define TSL4531_TCNTRL_200MS 0x01 +#define TSL4531_TCNTRL_100MS 0x02 + +/* part number in id register */ +#define TSL45311_ID 0x8 +#define TSL45313_ID 0x9 +#define TSL45315_ID 0xa +#define TSL45317_ID 0xb +#define TSL4531_ID_SHIFT 4 + +struct tsl4531_data { + struct i2c_client *client; + struct mutex lock; + int int_time; +}; + +static IIO_CONST_ATTR_INT_TIME_AVAIL("0.1 0.2 0.4"); + +static struct attribute *tsl4531_attributes[] = { + &iio_const_attr_integration_time_available.dev_attr.attr, + NULL +}; + +static const struct attribute_group tsl4531_attribute_group = { + .attrs = tsl4531_attributes, +}; + +static const struct iio_chan_spec tsl4531_channels[] = { + { + .type = IIO_LIGHT, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | + BIT(IIO_CHAN_INFO_SCALE) | + BIT(IIO_CHAN_INFO_INT_TIME) + } +}; + +static int tsl4531_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct tsl4531_data *data = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = i2c_smbus_read_word_data(data->client, + TSL4531_DATA); + if (ret < 0) + return ret; + *val = ret; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + /* 0.. 1x, 1 .. 2x, 2 .. 4x */ + *val = 1 << data->int_time; + return IIO_VAL_INT; + case IIO_CHAN_INFO_INT_TIME: + if (data->int_time == 0) + *val2 = 400000; + else if (data->int_time == 1) + *val2 = 200000; + else if (data->int_time == 2) + *val2 = 100000; + else + return -EINVAL; + *val = 0; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } +} + +static int tsl4531_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct tsl4531_data *data = iio_priv(indio_dev); + int int_time, ret; + + switch (mask) { + case IIO_CHAN_INFO_INT_TIME: + if (val != 0) + return -EINVAL; + if (val2 == 400000) + int_time = 0; + else if (val2 == 200000) + int_time = 1; + else if (val2 == 100000) + int_time = 2; + else + return -EINVAL; + mutex_lock(&data->lock); + ret = i2c_smbus_write_byte_data(data->client, + TSL4531_CONFIG, int_time); + if (ret >= 0) + data->int_time = int_time; + mutex_unlock(&data->lock); + return ret; + default: + return -EINVAL; + } +} + +static const struct iio_info tsl4531_info = { + .read_raw = tsl4531_read_raw, + .write_raw = tsl4531_write_raw, + .attrs = &tsl4531_attribute_group, + .driver_module = THIS_MODULE, +}; + +static int tsl4531_check_id(struct i2c_client *client) +{ + int ret = i2c_smbus_read_byte_data(client, TSL4531_ID); + if (ret < 0) + return ret; + + switch (ret >> TSL4531_ID_SHIFT) { + case TSL45311_ID: + case TSL45313_ID: + case TSL45315_ID: + case TSL45317_ID: + return 1; + default: + return 0; + } +} + +static int tsl4531_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct tsl4531_data *data; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + data = iio_priv(indio_dev); + i2c_set_clientdata(client, indio_dev); + data->client = client; + mutex_init(&data->lock); + + if (!tsl4531_check_id(client)) { + dev_err(&client->dev, "no TSL4531 sensor\n"); + return -ENODEV; + } + + ret = i2c_smbus_write_byte_data(data->client, TSL4531_CONTROL, + TSL4531_MODE_NORMAL); + if (ret < 0) + return ret; + + ret = i2c_smbus_write_byte_data(data->client, TSL4531_CONFIG, + TSL4531_TCNTRL_400MS); + if (ret < 0) + return ret; + + indio_dev->dev.parent = &client->dev; + indio_dev->info = &tsl4531_info; + indio_dev->channels = tsl4531_channels; + indio_dev->num_channels = ARRAY_SIZE(tsl4531_channels); + indio_dev->name = TSL4531_DRV_NAME; + indio_dev->modes = INDIO_DIRECT_MODE; + + return iio_device_register(indio_dev); +} + +static int tsl4531_powerdown(struct i2c_client *client) +{ + return i2c_smbus_write_byte_data(client, TSL4531_CONTROL, + TSL4531_MODE_POWERDOWN); +} + +static int tsl4531_remove(struct i2c_client *client) +{ + iio_device_unregister(i2c_get_clientdata(client)); + tsl4531_powerdown(client); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int tsl4531_suspend(struct device *dev) +{ + return tsl4531_powerdown(to_i2c_client(dev)); +} + +static int tsl4531_resume(struct device *dev) +{ + return i2c_smbus_write_byte_data(to_i2c_client(dev), TSL4531_CONTROL, + TSL4531_MODE_NORMAL); +} +#endif + +static SIMPLE_DEV_PM_OPS(tsl4531_pm_ops, tsl4531_suspend, tsl4531_resume); + +static const struct i2c_device_id tsl4531_id[] = { + { "tsl4531", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, tsl4531_id); + +static struct i2c_driver tsl4531_driver = { + .driver = { + .name = TSL4531_DRV_NAME, + .pm = &tsl4531_pm_ops, + .owner = THIS_MODULE, + }, + .probe = tsl4531_probe, + .remove = tsl4531_remove, + .id_table = tsl4531_id, +}; + +module_i2c_driver(tsl4531_driver); + +MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>"); +MODULE_DESCRIPTION("TAOS TSL4531 ambient light sensors driver"); +MODULE_LICENSE("GPL"); |