diff options
Diffstat (limited to 'drivers/input')
49 files changed, 3894 insertions, 308 deletions
diff --git a/drivers/input/input-mt.c b/drivers/input/input-mt.c index cb150a1..54fce56 100644 --- a/drivers/input/input-mt.c +++ b/drivers/input/input-mt.c @@ -88,10 +88,13 @@ int input_mt_init_slots(struct input_dev *dev, unsigned int num_slots, goto err_mem; } - /* Mark slots as 'unused' */ + /* Mark slots as 'inactive' */ for (i = 0; i < num_slots; i++) input_mt_set_value(&mt->slots[i], ABS_MT_TRACKING_ID, -1); + /* Mark slots as 'unused' */ + mt->frame = 1; + dev->mt = mt; return 0; err_mem: @@ -365,27 +368,35 @@ static void input_mt_set_slots(struct input_mt *mt, int *slots, int num_pos) { struct input_mt_slot *s; - int *w = mt->red, *p; + int *w = mt->red, j; - for (p = slots; p != slots + num_pos; p++) - *p = -1; + for (j = 0; j != num_pos; j++) + slots[j] = -1; for (s = mt->slots; s != mt->slots + mt->num_slots; s++) { if (!input_mt_is_active(s)) continue; - for (p = slots; p != slots + num_pos; p++) - if (*w++ < 0) - *p = s - mt->slots; + + for (j = 0; j != num_pos; j++) { + if (w[j] < 0) { + slots[j] = s - mt->slots; + break; + } + } + + w += num_pos; } for (s = mt->slots; s != mt->slots + mt->num_slots; s++) { if (input_mt_is_active(s)) continue; - for (p = slots; p != slots + num_pos; p++) - if (*p < 0) { - *p = s - mt->slots; + + for (j = 0; j != num_pos; j++) { + if (slots[j] < 0) { + slots[j] = s - mt->slots; break; } + } } } @@ -439,6 +450,8 @@ EXPORT_SYMBOL(input_mt_assign_slots); * set the key on the first unused slot and return. * * If no available slot can be found, -1 is returned. + * Note that for this function to work properly, input_mt_sync_frame() has + * to be called at each frame. */ int input_mt_get_slot_by_key(struct input_dev *dev, int key) { @@ -453,7 +466,7 @@ int input_mt_get_slot_by_key(struct input_dev *dev, int key) return s - mt->slots; for (s = mt->slots; s != mt->slots + mt->num_slots; s++) - if (!input_mt_is_active(s)) { + if (!input_mt_is_active(s) && !input_mt_is_used(mt, s)) { s->key = key; return s - mt->slots; } diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index a89ba7c..106fbac 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -588,6 +588,16 @@ config KEYBOARD_DAVINCI To compile this driver as a module, choose M here: the module will be called davinci_keyscan. +config KEYBOARD_IPAQ_MICRO + tristate "Buttons on Micro SoC (iPaq h3100,h3600,h3700)" + depends on MFD_IPAQ_MICRO + help + Say Y to enable support for the buttons attached to + Micro peripheral controller on iPAQ h3100/h3600/h3700 + + To compile this driver as a module, choose M here: the + module will be called ipaq-micro-keys. + config KEYBOARD_OMAP tristate "TI OMAP keypad support" depends on ARCH_OMAP1 @@ -686,4 +696,15 @@ config KEYBOARD_CAP11XX To compile this driver as a module, choose M here: the module will be called cap11xx. +config KEYBOARD_BCM + tristate "Broadcom keypad driver" + depends on OF && HAVE_CLK + select INPUT_MATRIXKMAP + default ARCH_BCM_CYGNUS + help + Say Y here if you want to use Broadcom keypad. + + To compile this driver as a module, choose M here: the + module will be called bcm-keypad. + endif diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 4707678..df28d55 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -10,6 +10,7 @@ obj-$(CONFIG_KEYBOARD_ADP5589) += adp5589-keys.o obj-$(CONFIG_KEYBOARD_AMIGA) += amikbd.o obj-$(CONFIG_KEYBOARD_ATARI) += atakbd.o obj-$(CONFIG_KEYBOARD_ATKBD) += atkbd.o +obj-$(CONFIG_KEYBOARD_BCM) += bcm-keypad.o obj-$(CONFIG_KEYBOARD_BFIN) += bf54x-keys.o obj-$(CONFIG_KEYBOARD_CAP11XX) += cap11xx.o obj-$(CONFIG_KEYBOARD_CLPS711X) += clps711x-keypad.o @@ -23,6 +24,7 @@ obj-$(CONFIG_KEYBOARD_TCA6416) += tca6416-keypad.o obj-$(CONFIG_KEYBOARD_TCA8418) += tca8418_keypad.o obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o +obj-$(CONFIG_KEYBOARD_IPAQ_MICRO) += ipaq-micro-keys.o obj-$(CONFIG_KEYBOARD_IMX) += imx_keypad.o obj-$(CONFIG_KEYBOARD_HP6XX) += jornada680_kbd.o obj-$(CONFIG_KEYBOARD_HP7XX) += jornada720_kbd.o diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 387c51f..ec876b5 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -1653,6 +1653,12 @@ static int __init atkbd_deactivate_fixup(const struct dmi_system_id *id) return 1; } +/* + * NOTE: do not add any more "force release" quirks to this table. The + * task of adjusting list of keys that should be "released" automatically + * by the driver is now delegated to userspace tools, such as udev, so + * submit such quirks there. + */ static const struct dmi_system_id atkbd_dmi_quirk_table[] __initconst = { { .matches = { diff --git a/drivers/input/keyboard/bcm-keypad.c b/drivers/input/keyboard/bcm-keypad.c new file mode 100644 index 0000000..86a8b72 --- /dev/null +++ b/drivers/input/keyboard/bcm-keypad.c @@ -0,0 +1,458 @@ +/* + * Copyright (C) 2014 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/gfp.h> +#include <linux/io.h> +#include <linux/input.h> +#include <linux/input/matrix_keypad.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/stddef.h> +#include <linux/types.h> + +#define DEFAULT_CLK_HZ 31250 +#define MAX_ROWS 8 +#define MAX_COLS 8 + +/* Register/field definitions */ +#define KPCR_OFFSET 0x00000080 +#define KPCR_MODE 0x00000002 +#define KPCR_MODE_SHIFT 1 +#define KPCR_MODE_MASK 1 +#define KPCR_ENABLE 0x00000001 +#define KPCR_STATUSFILTERENABLE 0x00008000 +#define KPCR_STATUSFILTERTYPE_SHIFT 12 +#define KPCR_COLFILTERENABLE 0x00000800 +#define KPCR_COLFILTERTYPE_SHIFT 8 +#define KPCR_ROWWIDTH_SHIFT 20 +#define KPCR_COLUMNWIDTH_SHIFT 16 + +#define KPIOR_OFFSET 0x00000084 +#define KPIOR_ROWOCONTRL_SHIFT 24 +#define KPIOR_ROWOCONTRL_MASK 0xFF000000 +#define KPIOR_COLUMNOCONTRL_SHIFT 16 +#define KPIOR_COLUMNOCONTRL_MASK 0x00FF0000 +#define KPIOR_COLUMN_IO_DATA_SHIFT 0 + +#define KPEMR0_OFFSET 0x00000090 +#define KPEMR1_OFFSET 0x00000094 +#define KPEMR2_OFFSET 0x00000098 +#define KPEMR3_OFFSET 0x0000009C +#define KPEMR_EDGETYPE_BOTH 3 + +#define KPSSR0_OFFSET 0x000000A0 +#define KPSSR1_OFFSET 0x000000A4 +#define KPSSRN_OFFSET(reg_n) (KPSSR0_OFFSET + 4 * (reg_n)) +#define KPIMR0_OFFSET 0x000000B0 +#define KPIMR1_OFFSET 0x000000B4 +#define KPICR0_OFFSET 0x000000B8 +#define KPICR1_OFFSET 0x000000BC +#define KPICRN_OFFSET(reg_n) (KPICR0_OFFSET + 4 * (reg_n)) +#define KPISR0_OFFSET 0x000000C0 +#define KPISR1_OFFSET 0x000000C4 + +#define KPCR_STATUSFILTERTYPE_MAX 7 +#define KPCR_COLFILTERTYPE_MAX 7 + +/* Macros to determine the row/column from a bit that is set in SSR0/1. */ +#define BIT_TO_ROW_SSRN(bit_nr, reg_n) (((bit_nr) >> 3) + 4 * (reg_n)) +#define BIT_TO_COL(bit_nr) ((bit_nr) % 8) + +/* Structure representing various run-time entities */ +struct bcm_kp { + void __iomem *base; + int irq; + struct clk *clk; + struct input_dev *input_dev; + unsigned long last_state[2]; + unsigned int n_rows; + unsigned int n_cols; + u32 kpcr; + u32 kpior; + u32 kpemr; + u32 imr0_val; + u32 imr1_val; +}; + +/* + * Returns the keycode from the input device keymap given the row and + * column. + */ +static int bcm_kp_get_keycode(struct bcm_kp *kp, int row, int col) +{ + unsigned int row_shift = get_count_order(kp->n_cols); + unsigned short *keymap = kp->input_dev->keycode; + + return keymap[MATRIX_SCAN_CODE(row, col, row_shift)]; +} + +static void bcm_kp_report_keys(struct bcm_kp *kp, int reg_num, int pull_mode) +{ + unsigned long state, change; + int bit_nr; + int key_press; + int row, col; + unsigned int keycode; + + /* Clear interrupts */ + writel(0xFFFFFFFF, kp->base + KPICRN_OFFSET(reg_num)); + + state = readl(kp->base + KPSSRN_OFFSET(reg_num)); + change = kp->last_state[reg_num] ^ state; + kp->last_state[reg_num] = state; + + for_each_set_bit(bit_nr, &change, BITS_PER_LONG) { + key_press = state & BIT(bit_nr); + /* The meaning of SSR register depends on pull mode. */ + key_press = pull_mode ? !key_press : key_press; + row = BIT_TO_ROW_SSRN(bit_nr, reg_num); + col = BIT_TO_COL(bit_nr); + keycode = bcm_kp_get_keycode(kp, row, col); + input_report_key(kp->input_dev, keycode, key_press); + } +} + +static irqreturn_t bcm_kp_isr_thread(int irq, void *dev_id) +{ + struct bcm_kp *kp = dev_id; + int pull_mode = (kp->kpcr >> KPCR_MODE_SHIFT) & KPCR_MODE_MASK; + int reg_num; + + for (reg_num = 0; reg_num <= 1; reg_num++) + bcm_kp_report_keys(kp, reg_num, pull_mode); + + input_sync(kp->input_dev); + + return IRQ_HANDLED; +} + +static int bcm_kp_start(struct bcm_kp *kp) +{ + int error; + + if (kp->clk) { + error = clk_prepare_enable(kp->clk); + if (error) + return error; + } + + writel(kp->kpior, kp->base + KPIOR_OFFSET); + + writel(kp->imr0_val, kp->base + KPIMR0_OFFSET); + writel(kp->imr1_val, kp->base + KPIMR1_OFFSET); + + writel(kp->kpemr, kp->base + KPEMR0_OFFSET); + writel(kp->kpemr, kp->base + KPEMR1_OFFSET); + writel(kp->kpemr, kp->base + KPEMR2_OFFSET); + writel(kp->kpemr, kp->base + KPEMR3_OFFSET); + + writel(0xFFFFFFFF, kp->base + KPICR0_OFFSET); + writel(0xFFFFFFFF, kp->base + KPICR1_OFFSET); + + kp->last_state[0] = readl(kp->base + KPSSR0_OFFSET); + kp->last_state[0] = readl(kp->base + KPSSR1_OFFSET); + + writel(kp->kpcr | KPCR_ENABLE, kp->base + KPCR_OFFSET); + + return 0; +} + +static void bcm_kp_stop(const struct bcm_kp *kp) +{ + u32 val; + + val = readl(kp->base + KPCR_OFFSET); + val &= ~KPCR_ENABLE; + writel(0, kp->base + KPCR_OFFSET); + writel(0, kp->base + KPIMR0_OFFSET); + writel(0, kp->base + KPIMR1_OFFSET); + writel(0xFFFFFFFF, kp->base + KPICR0_OFFSET); + writel(0xFFFFFFFF, kp->base + KPICR1_OFFSET); + + if (kp->clk) + clk_disable_unprepare(kp->clk); +} + +static int bcm_kp_open(struct input_dev *dev) +{ + struct bcm_kp *kp = input_get_drvdata(dev); + + return bcm_kp_start(kp); +} + +static void bcm_kp_close(struct input_dev *dev) +{ + struct bcm_kp *kp = input_get_drvdata(dev); + + bcm_kp_stop(kp); +} + +static int bcm_kp_matrix_key_parse_dt(struct bcm_kp *kp) +{ + struct device *dev = kp->input_dev->dev.parent; + struct device_node *np = dev->of_node; + int error; + unsigned int dt_val; + unsigned int i; + unsigned int num_rows, col_mask, rows_set; + + /* Initialize the KPCR Keypad Configuration Register */ + kp->kpcr = KPCR_STATUSFILTERENABLE | KPCR_COLFILTERENABLE; + + error = matrix_keypad_parse_of_params(dev, &kp->n_rows, &kp->n_cols); + if (error) { + dev_err(dev, "failed to parse kp params\n"); + return error; + } + + /* Set row width for the ASIC block. */ + kp->kpcr |= (kp->n_rows - 1) << KPCR_ROWWIDTH_SHIFT; + + /* Set column width for the ASIC block. */ + kp->kpcr |= (kp->n_cols - 1) << KPCR_COLUMNWIDTH_SHIFT; + + /* Configure the IMR registers */ + + /* + * IMR registers contain interrupt enable bits for 8x8 matrix + * IMR0 register format: <row3> <row2> <row1> <row0> + * IMR1 register format: <row7> <row6> <row5> <row4> + */ + col_mask = (1 << (kp->n_cols)) - 1; + num_rows = kp->n_rows; + + /* Set column bits in rows 0 to 3 in IMR0 */ + kp->imr0_val = col_mask; + + rows_set = 1; + while (--num_rows && rows_set++ < 4) + kp->imr0_val |= kp->imr0_val << MAX_COLS; + + /* Set column bits in rows 4 to 7 in IMR1 */ + kp->imr1_val = 0; + if (num_rows) { + kp->imr1_val = col_mask; + while (--num_rows) + kp->imr1_val |= kp->imr1_val << MAX_COLS; + } + + /* Initialize the KPEMR Keypress Edge Mode Registers */ + /* Trigger on both edges */ + kp->kpemr = 0; + for (i = 0; i <= 30; i += 2) + kp->kpemr |= (KPEMR_EDGETYPE_BOTH << i); + + /* + * Obtain the Status filter debounce value and verify against the + * possible values specified in the DT binding. + */ + of_property_read_u32(np, "status-debounce-filter-period", &dt_val); + + if (dt_val > KPCR_STATUSFILTERTYPE_MAX) { + dev_err(dev, "Invalid Status filter debounce value %d\n", + dt_val); + return -EINVAL; + } + + kp->kpcr |= dt_val << KPCR_STATUSFILTERTYPE_SHIFT; + + /* + * Obtain the Column filter debounce value and verify against the + * possible values specified in the DT binding. + */ + of_property_read_u32(np, "col-debounce-filter-period", &dt_val); + + if (dt_val > KPCR_COLFILTERTYPE_MAX) { + dev_err(dev, "Invalid Column filter debounce value %d\n", + dt_val); + return -EINVAL; + } + + kp->kpcr |= dt_val << KPCR_COLFILTERTYPE_SHIFT; + + /* + * Determine between the row and column, + * which should be configured as output. + */ + if (of_property_read_bool(np, "row-output-enabled")) { + /* + * Set RowOContrl or ColumnOContrl in KPIOR + * to the number of pins to drive as outputs + */ + kp->kpior = ((1 << kp->n_rows) - 1) << + KPIOR_ROWOCONTRL_SHIFT; + } else { + kp->kpior = ((1 << kp->n_cols) - 1) << + KPIOR_COLUMNOCONTRL_SHIFT; + } + + /* + * Determine if the scan pull up needs to be enabled + */ + if (of_property_read_bool(np, "pull-up-enabled")) + kp->kpcr |= KPCR_MODE; + + dev_dbg(dev, "n_rows=%d n_col=%d kpcr=%x kpior=%x kpemr=%x\n", + kp->n_rows, kp->n_cols, + kp->kpcr, kp->kpior, kp->kpemr); + + return 0; +} + + +static int bcm_kp_probe(struct platform_device *pdev) +{ + struct bcm_kp *kp; + struct input_dev *input_dev; + struct resource *res; + int error; + + kp = devm_kzalloc(&pdev->dev, sizeof(*kp), GFP_KERNEL); + if (!kp) + return -ENOMEM; + + input_dev = devm_input_allocate_device(&pdev->dev); + if (!input_dev) { + dev_err(&pdev->dev, "failed to allocate the input device\n"); + return -ENOMEM; + } + + __set_bit(EV_KEY, input_dev->evbit); + + /* Enable auto repeat feature of Linux input subsystem */ + if (of_property_read_bool(pdev->dev.of_node, "autorepeat")) + __set_bit(EV_REP, input_dev->evbit); + + input_dev->name = pdev->name; + input_dev->phys = "keypad/input0"; + input_dev->dev.parent = &pdev->dev; + input_dev->open = bcm_kp_open; + input_dev->close = bcm_kp_close; + + input_dev->id.bustype = BUS_HOST; + input_dev->id.vendor = 0x0001; + input_dev->id.product = 0x0001; + input_dev->id.version = 0x0100; + + input_set_drvdata(input_dev, kp); + + kp->input_dev = input_dev; + + platform_set_drvdata(pdev, kp); + + error = bcm_kp_matrix_key_parse_dt(kp); + if (error) + return error; + + error = matrix_keypad_build_keymap(NULL, NULL, + kp->n_rows, kp->n_cols, + NULL, input_dev); + if (error) { + dev_err(&pdev->dev, "failed to build keymap\n"); + return error; + } + + /* Get the KEYPAD base address */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "Missing keypad base address resource\n"); + return -ENODEV; + } + + kp->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(kp->base)) + return PTR_ERR(kp->base); + + /* Enable clock */ + kp->clk = devm_clk_get(&pdev->dev, "peri_clk"); + if (IS_ERR(kp->clk)) { + error = PTR_ERR(kp->clk); + if (error != -ENOENT) { + if (error != -EPROBE_DEFER) + dev_err(&pdev->dev, "Failed to get clock\n"); + return error; + } + dev_dbg(&pdev->dev, + "No clock specified. Assuming it's enabled\n"); + kp->clk = NULL; + } else { + unsigned int desired_rate; + long actual_rate; + + error = of_property_read_u32(pdev->dev.of_node, + "clock-frequency", &desired_rate); + if (error < 0) + desired_rate = DEFAULT_CLK_HZ; + + actual_rate = clk_round_rate(kp->clk, desired_rate); + if (actual_rate <= 0) + return -EINVAL; + + error = clk_set_rate(kp->clk, actual_rate); + if (error) + return error; + + error = clk_prepare_enable(kp->clk); + if (error) + return error; + } + + /* Put the kp into a known sane state */ + bcm_kp_stop(kp); + + kp->irq = platform_get_irq(pdev, 0); + if (kp->irq < 0) { + dev_err(&pdev->dev, "no IRQ specified\n"); + return -EINVAL; + } + + error = devm_request_threaded_irq(&pdev->dev, kp->irq, + NULL, bcm_kp_isr_thread, + IRQF_ONESHOT, pdev->name, kp); + if (error) { + dev_err(&pdev->dev, "failed to request IRQ\n"); + return error; + } + + error = input_register_device(input_dev); + if (error) { + dev_err(&pdev->dev, "failed to register input device\n"); + return error; + } + + return 0; +} + +static const struct of_device_id bcm_kp_of_match[] = { + { .compatible = "brcm,bcm-keypad" }, + { }, +}; +MODULE_DEVICE_TABLE(of, bcm_kp_of_match); + +static struct platform_driver bcm_kp_device_driver = { + .probe = bcm_kp_probe, + .driver = { + .name = "bcm-keypad", + .of_match_table = of_match_ptr(bcm_kp_of_match), + } +}; + +module_platform_driver(bcm_kp_device_driver); + +MODULE_AUTHOR("Broadcom Corporation"); +MODULE_DESCRIPTION("BCM Keypad Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/keyboard/cros_ec_keyb.c b/drivers/input/keyboard/cros_ec_keyb.c index ffa989f..64b9b59 100644 --- a/drivers/input/keyboard/cros_ec_keyb.c +++ b/drivers/input/keyboard/cros_ec_keyb.c @@ -338,7 +338,7 @@ static int cros_ec_keyb_resume(struct device *dev) * wake source (e.g. the lid is open and the user might press a key to * wake) then the key scan buffer should be preserved. */ - if (ckdev->ec->was_wake_device) + if (!ckdev->ec->was_wake_device) cros_ec_keyb_clear_keyboard(ckdev); return 0; diff --git a/drivers/input/keyboard/gpio_keys_polled.c b/drivers/input/keyboard/gpio_keys_polled.c index 90df4df..097d721 100644 --- a/drivers/input/keyboard/gpio_keys_polled.c +++ b/drivers/input/keyboard/gpio_keys_polled.c @@ -125,7 +125,7 @@ static struct gpio_keys_platform_data *gpio_keys_polled_get_devtree_pdata(struct device_for_each_child_node(dev, child) { struct gpio_desc *desc; - desc = devm_get_gpiod_from_child(dev, child); + desc = devm_get_gpiod_from_child(dev, NULL, child); if (IS_ERR(desc)) { error = PTR_ERR(desc); if (error != -EPROBE_DEFER) diff --git a/drivers/input/keyboard/ipaq-micro-keys.c b/drivers/input/keyboard/ipaq-micro-keys.c new file mode 100644 index 0000000..602900d --- /dev/null +++ b/drivers/input/keyboard/ipaq-micro-keys.c @@ -0,0 +1,168 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * h3600 atmel micro companion support, key subdevice + * based on previous kernel 2.4 version + * Author : Alessandro Gardich <gremlin@gremlin.it> + * Author : Linus Walleij <linus.walleij@linaro.org> + * + */ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/fs.h> +#include <linux/interrupt.h> +#include <linux/sched.h> +#include <linux/pm.h> +#include <linux/sysctl.h> +#include <linux/proc_fs.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/input.h> +#include <linux/platform_device.h> +#include <linux/mfd/ipaq-micro.h> + +struct ipaq_micro_keys { + struct ipaq_micro *micro; + struct input_dev *input; + u16 *codes; +}; + +static const u16 micro_keycodes[] = { + KEY_RECORD, /* 1: Record button */ + KEY_CALENDAR, /* 2: Calendar */ + KEY_ADDRESSBOOK, /* 3: Contacts (looks like Outlook) */ + KEY_MAIL, /* 4: Envelope (Q on older iPAQs) */ + KEY_HOMEPAGE, /* 5: Start (looks like swoopy arrow) */ + KEY_UP, /* 6: Up */ + KEY_RIGHT, /* 7: Right */ + KEY_LEFT, /* 8: Left */ + KEY_DOWN, /* 9: Down */ +}; + +static void micro_key_receive(void *data, int len, unsigned char *msg) +{ + struct ipaq_micro_keys *keys = data; + int key, down; + + down = 0x80 & msg[0]; + key = 0x7f & msg[0]; + + if (key < ARRAY_SIZE(micro_keycodes)) { + input_report_key(keys->input, keys->codes[key], down); + input_sync(keys->input); + } +} + +static void micro_key_start(struct ipaq_micro_keys *keys) +{ + spin_lock(&keys->micro->lock); + keys->micro->key = micro_key_receive; + keys->micro->key_data = keys; + spin_unlock(&keys->micro->lock); +} + +static void micro_key_stop(struct ipaq_micro_keys *keys) +{ + spin_lock(&keys->micro->lock); + keys->micro->key = NULL; + keys->micro->key_data = NULL; + spin_unlock(&keys->micro->lock); +} + +static int micro_key_open(struct input_dev *input) +{ + struct ipaq_micro_keys *keys = input_get_drvdata(input); + + micro_key_start(keys); + + return 0; +} + +static void micro_key_close(struct input_dev *input) +{ + struct ipaq_micro_keys *keys = input_get_drvdata(input); + + micro_key_stop(keys); +} + +static int micro_key_probe(struct platform_device *pdev) +{ + struct ipaq_micro_keys *keys; + int error; + int i; + + keys = devm_kzalloc(&pdev->dev, sizeof(*keys), GFP_KERNEL); + if (!keys) + return -ENOMEM; + + keys->micro = dev_get_drvdata(pdev->dev.parent); + + keys->input = devm_input_allocate_device(&pdev->dev); + if (!keys->input) + return -ENOMEM; + + keys->input->keycodesize = sizeof(micro_keycodes[0]); + keys->input->keycodemax = ARRAY_SIZE(micro_keycodes); + keys->codes = devm_kmemdup(&pdev->dev, micro_keycodes, + keys->input->keycodesize * keys->input->keycodemax, + GFP_KERNEL); + keys->input->keycode = keys->codes; + + __set_bit(EV_KEY, keys->input->evbit); + for (i = 0; i < ARRAY_SIZE(micro_keycodes); i++) + __set_bit(micro_keycodes[i], keys->input->keybit); + + keys->input->name = "h3600 micro keys"; + keys->input->open = micro_key_open; + keys->input->close = micro_key_close; + input_set_drvdata(keys->input, keys); + + error = input_register_device(keys->input); + if (error) + return error; + + platform_set_drvdata(pdev, keys); + return 0; +} + +static int __maybe_unused micro_key_suspend(struct device *dev) +{ + struct ipaq_micro_keys *keys = dev_get_drvdata(dev); + + micro_key_stop(keys); + + return 0; +} + +static int __maybe_unused micro_key_resume(struct device *dev) +{ + struct ipaq_micro_keys *keys = dev_get_drvdata(dev); + struct input_dev *input = keys->input; + + mutex_lock(&input->mutex); + + if (input->users) + micro_key_start(keys); + + mutex_unlock(&input->mutex); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(micro_key_dev_pm_ops, + micro_key_suspend, micro_key_resume); + +static struct platform_driver micro_key_device_driver = { + .driver = { + .name = "ipaq-micro-keys", + .pm = µ_key_dev_pm_ops, + }, + .probe = micro_key_probe, +}; +module_platform_driver(micro_key_device_driver); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("driver for iPAQ Atmel micro keys"); +MODULE_ALIAS("platform:ipaq-micro-keys"); diff --git a/drivers/input/keyboard/tc3589x-keypad.c b/drivers/input/keyboard/tc3589x-keypad.c index 8ff612d..31c606a 100644 --- a/drivers/input/keyboard/tc3589x-keypad.c +++ b/drivers/input/keyboard/tc3589x-keypad.c @@ -70,6 +70,28 @@ #define TC3589x_KBD_INT_CLR 0x1 /** + * struct tc35893_keypad_platform_data - platform specific keypad data + * @keymap_data: matrix scan code table for keycodes + * @krow: mask for available rows, value is 0xFF + * @kcol: mask for available columns, value is 0xFF + * @debounce_period: platform specific debounce time + * @settle_time: platform specific settle down time + * @irqtype: type of interrupt, falling or rising edge + * @enable_wakeup: specifies if keypad event can wake up system from sleep + * @no_autorepeat: flag for auto repetition + */ +struct tc3589x_keypad_platform_data { + const struct matrix_keymap_data *keymap_data; + u8 krow; + u8 kcol; + u8 debounce_period; + u8 settle_time; + unsigned long irqtype; + bool enable_wakeup; + bool no_autorepeat; +}; + +/** * struct tc_keypad - data structure used by keypad driver * @tc3589x: pointer to tc35893 * @input: pointer to input device object @@ -296,7 +318,6 @@ static void tc3589x_keypad_close(struct input_dev *input) tc3589x_keypad_disable(keypad); } -#ifdef CONFIG_OF static const struct tc3589x_keypad_platform_data * tc3589x_keypad_of_probe(struct device *dev) { @@ -346,14 +367,6 @@ tc3589x_keypad_of_probe(struct device *dev) return plat; } -#else -static inline const struct tc3589x_keypad_platform_data * -tc3589x_keypad_of_probe(struct device *dev) -{ - return ERR_PTR(-ENODEV); -} -#endif - static int tc3589x_keypad_probe(struct platform_device *pdev) { @@ -363,13 +376,10 @@ static int tc3589x_keypad_probe(struct platform_device *pdev) const struct tc3589x_keypad_platform_data *plat; int error, irq; - plat = tc3589x->pdata->keypad; - if (!plat) { - plat = tc3589x_keypad_of_probe(&pdev->dev); - if (IS_ERR(plat)) { - dev_err(&pdev->dev, "invalid keypad platform data\n"); - return PTR_ERR(plat); - } + plat = tc3589x_keypad_of_probe(&pdev->dev); + if (IS_ERR(plat)) { + dev_err(&pdev->dev, "invalid keypad platform data\n"); + return PTR_ERR(plat); } irq = platform_get_irq(pdev, 0); @@ -411,9 +421,9 @@ static int tc3589x_keypad_probe(struct platform_device *pdev) input_set_drvdata(input, keypad); - error = request_threaded_irq(irq, NULL, - tc3589x_keypad_irq, plat->irqtype, - "tc3589x-keypad", keypad); + error = request_threaded_irq(irq, NULL, tc3589x_keypad_irq, + plat->irqtype | IRQF_ONESHOT, + "tc3589x-keypad", keypad); if (error < 0) { dev_err(&pdev->dev, "Could not allocate irq %d,error %d\n", diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 6deb8da..4436ab1 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -115,6 +115,18 @@ config INPUT_PCSPKR To compile this driver as a module, choose M here: the module will be called pcspkr. +config INPUT_PM8941_PWRKEY + tristate "Qualcomm PM8941 power key support" + depends on MFD_SPMI_PMIC + help + Say Y here if you want support for the power key usually found + on boards using a Qualcomm PM8941 compatible PMIC. + + If unsure, say Y. + + To compile this driver as a module, choose M here: the module + will be called pm8941-pwrkey. + config INPUT_PM8XXX_VIBRATOR tristate "Qualcomm PM8XXX vibrator support" depends on MFD_PM8XXX @@ -165,6 +177,18 @@ config INPUT_MAX77693_HAPTIC To compile this driver as module, choose M here: the module will be called max77693-haptic. +config INPUT_MAX77843_HAPTIC + tristate "MAXIM MAX77843 haptic controller support" + depends on MFD_MAX77843 && REGULATOR + select INPUT_FF_MEMLESS + help + This option enables support for the haptic controller on + MAXIM MAX77843 chip. The driver supports ff-memless interface + from input framework. + + To compile this driver as module, choose M here: the + module will be called max77843-haptic. + config INPUT_MAX8925_ONKEY tristate "MAX8925 ONKEY support" depends on MFD_MAX8925 diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index 403a1a5..78ba4c1 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -39,6 +39,7 @@ obj-$(CONFIG_INPUT_KEYSPAN_REMOTE) += keyspan_remote.o obj-$(CONFIG_INPUT_KXTJ9) += kxtj9.o obj-$(CONFIG_INPUT_M68K_BEEP) += m68kspkr.o obj-$(CONFIG_INPUT_MAX77693_HAPTIC) += max77693-haptic.o +obj-$(CONFIG_INPUT_MAX77843_HAPTIC) += max77843-haptic.o obj-$(CONFIG_INPUT_MAX8925_ONKEY) += max8925_onkey.o obj-$(CONFIG_INPUT_MAX8997_HAPTIC) += max8997_haptic.o obj-$(CONFIG_INPUT_MC13783_PWRBUTTON) += mc13783-pwrbutton.o @@ -49,6 +50,7 @@ obj-$(CONFIG_INPUT_PCAP) += pcap_keys.o obj-$(CONFIG_INPUT_PCF50633_PMU) += pcf50633-input.o obj-$(CONFIG_INPUT_PCF8574) += pcf8574_keypad.o obj-$(CONFIG_INPUT_PCSPKR) += pcspkr.o +obj-$(CONFIG_INPUT_PM8941_PWRKEY) += pm8941-pwrkey.o obj-$(CONFIG_INPUT_PM8XXX_VIBRATOR) += pm8xxx-vibrator.o obj-$(CONFIG_INPUT_PMIC8XXX_PWRKEY) += pmic8xxx-pwrkey.o obj-$(CONFIG_INPUT_POWERMATE) += powermate.o diff --git a/drivers/input/misc/max77843-haptic.c b/drivers/input/misc/max77843-haptic.c new file mode 100644 index 0000000..dccbb46 --- /dev/null +++ b/drivers/input/misc/max77843-haptic.c @@ -0,0 +1,358 @@ +/* + * MAXIM MAX77693 Haptic device driver + * + * Copyright (C) 2015 Samsung Electronics + * Author: Jaewon Kim <jaewon02.kim@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/err.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/mfd/max77843-private.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/pwm.h> +#include <linux/regmap.h> +#include <linux/regulator/consumer.h> +#include <linux/slab.h> +#include <linux/workqueue.h> + +#define MAX_MAGNITUDE_SHIFT 16 + +enum max77843_haptic_motor_type { + MAX77843_HAPTIC_ERM = 0, + MAX77843_HAPTIC_LRA, +}; + +enum max77843_haptic_pwm_divisor { + MAX77843_HAPTIC_PWM_DIVISOR_32 = 0, + MAX77843_HAPTIC_PWM_DIVISOR_64, + MAX77843_HAPTIC_PWM_DIVISOR_128, + MAX77843_HAPTIC_PWM_DIVISOR_256, +}; + +struct max77843_haptic { + struct regmap *regmap_haptic; + struct device *dev; + struct input_dev *input_dev; + struct pwm_device *pwm_dev; + struct regulator *motor_reg; + struct work_struct work; + struct mutex mutex; + + unsigned int magnitude; + unsigned int pwm_duty; + + bool active; + bool suspended; + + enum max77843_haptic_motor_type type; + enum max77843_haptic_pwm_divisor pwm_divisor; +}; + +static int max77843_haptic_set_duty_cycle(struct max77843_haptic *haptic) +{ + int delta = (haptic->pwm_dev->period + haptic->pwm_duty) / 2; + int error; + + error = pwm_config(haptic->pwm_dev, delta, haptic->pwm_dev->period); + if (error) { + dev_err(haptic->dev, "failed to configure pwm: %d\n", error); + return error; + } + + return 0; +} + +static int max77843_haptic_bias(struct max77843_haptic *haptic, bool on) +{ + int error; + + error = regmap_update_bits(haptic->regmap_haptic, + MAX77843_SYS_REG_MAINCTRL1, + MAX77843_MAINCTRL1_BIASEN_MASK, + on << MAINCTRL1_BIASEN_SHIFT); + if (error) { + dev_err(haptic->dev, "failed to %s bias: %d\n", + on ? "enable" : "disable", error); + return error; + } + + return 0; +} + +static int max77843_haptic_config(struct max77843_haptic *haptic, bool enable) +{ + unsigned int value; + int error; + + value = (haptic->type << MCONFIG_MODE_SHIFT) | + (enable << MCONFIG_MEN_SHIFT) | + (haptic->pwm_divisor << MCONFIG_PDIV_SHIFT); + + error = regmap_write(haptic->regmap_haptic, + MAX77843_HAP_REG_MCONFIG, value); + if (error) { + dev_err(haptic->dev, + "failed to update haptic config: %d\n", error); + return error; + } + + return 0; +} + +static int max77843_haptic_enable(struct max77843_haptic *haptic) +{ + int error; + + if (haptic->active) + return 0; + + error = pwm_enable(haptic->pwm_dev); + if (error) { + dev_err(haptic->dev, + "failed to enable pwm device: %d\n", error); + return error; + } + + error = max77843_haptic_config(haptic, true); + if (error) + goto err_config; + + haptic->active = true; + + return 0; + +err_config: + pwm_disable(haptic->pwm_dev); + + return error; +} + +static int max77843_haptic_disable(struct max77843_haptic *haptic) +{ + int error; + + if (!haptic->active) + return 0; + + error = max77843_haptic_config(haptic, false); + if (error) + return error; + + pwm_disable(haptic->pwm_dev); + + haptic->active = false; + + return 0; +} + +static void max77843_haptic_play_work(struct work_struct *work) +{ + struct max77843_haptic *haptic = + container_of(work, struct max77843_haptic, work); + int error; + + mutex_lock(&haptic->mutex); + + if (haptic->suspended) + goto out_unlock; + + if (haptic->magnitude) { + error = max77843_haptic_set_duty_cycle(haptic); + if (error) { + dev_err(haptic->dev, + "failed to set duty cycle: %d\n", error); + goto out_unlock; + } + + error = max77843_haptic_enable(haptic); + if (error) + dev_err(haptic->dev, + "cannot enable haptic: %d\n", error); + } else { + error = max77843_haptic_disable(haptic); + if (error) + dev_err(haptic->dev, + "cannot disable haptic: %d\n", error); + } + +out_unlock: + mutex_unlock(&haptic->mutex); +} + +static int max77843_haptic_play_effect(struct input_dev *dev, void *data, + struct ff_effect *effect) +{ + struct max77843_haptic *haptic = input_get_drvdata(dev); + u64 period_mag_multi; + + haptic->magnitude = effect->u.rumble.strong_magnitude; + if (!haptic->magnitude) + haptic->magnitude = effect->u.rumble.weak_magnitude; + + period_mag_multi = (u64)haptic->pwm_dev->period * haptic->magnitude; + haptic->pwm_duty = (unsigned int)(period_mag_multi >> + MAX_MAGNITUDE_SHIFT); + + schedule_work(&haptic->work); + + return 0; +} + +static int max77843_haptic_open(struct input_dev *dev) +{ + struct max77843_haptic *haptic = input_get_drvdata(dev); + int error; + + error = max77843_haptic_bias(haptic, true); + if (error) + return error; + + error = regulator_enable(haptic->motor_reg); + if (error) { + dev_err(haptic->dev, + "failed to enable regulator: %d\n", error); + return error; + } + + return 0; +} + +static void max77843_haptic_close(struct input_dev *dev) +{ + struct max77843_haptic *haptic = input_get_drvdata(dev); + int error; + + cancel_work_sync(&haptic->work); + max77843_haptic_disable(haptic); + + error = regulator_disable(haptic->motor_reg); + if (error) + dev_err(haptic->dev, + "failed to disable regulator: %d\n", error); + + max77843_haptic_bias(haptic, false); +} + +static int max77843_haptic_probe(struct platform_device *pdev) +{ + struct max77843 *max77843 = dev_get_drvdata(pdev->dev.parent); + struct max77843_haptic *haptic; + int error; + + haptic = devm_kzalloc(&pdev->dev, sizeof(*haptic), GFP_KERNEL); + if (!haptic) + return -ENOMEM; + + haptic->regmap_haptic = max77843->regmap; + haptic->dev = &pdev->dev; + haptic->type = MAX77843_HAPTIC_LRA; + haptic->pwm_divisor = MAX77843_HAPTIC_PWM_DIVISOR_128; + + INIT_WORK(&haptic->work, max77843_haptic_play_work); + mutex_init(&haptic->mutex); + + haptic->pwm_dev = devm_pwm_get(&pdev->dev, NULL); + if (IS_ERR(haptic->pwm_dev)) { + dev_err(&pdev->dev, "failed to get pwm device\n"); + return PTR_ERR(haptic->pwm_dev); + } + + haptic->motor_reg = devm_regulator_get_exclusive(&pdev->dev, "haptic"); + if (IS_ERR(haptic->motor_reg)) { + dev_err(&pdev->dev, "failed to get regulator\n"); + return PTR_ERR(haptic->motor_reg); + } + + haptic->input_dev = devm_input_allocate_device(&pdev->dev); + if (!haptic->input_dev) { + dev_err(&pdev->dev, "failed to allocate input device\n"); + return -ENOMEM; + } + + haptic->input_dev->name = "max77843-haptic"; + haptic->input_dev->id.version = 1; + haptic->input_dev->dev.parent = &pdev->dev; + haptic->input_dev->open = max77843_haptic_open; + haptic->input_dev->close = max77843_haptic_close; + input_set_drvdata(haptic->input_dev, haptic); + input_set_capability(haptic->input_dev, EV_FF, FF_RUMBLE); + + error = input_ff_create_memless(haptic->input_dev, NULL, + max77843_haptic_play_effect); + if (error) { + dev_err(&pdev->dev, "failed to create force-feedback\n"); + return error; + } + + error = input_register_device(haptic->input_dev); + if (error) { + dev_err(&pdev->dev, "failed to register input device\n"); + return error; + } + + platform_set_drvdata(pdev, haptic); + + return 0; +} + +static int __maybe_unused max77843_haptic_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct max77843_haptic *haptic = platform_get_drvdata(pdev); + int error; + + error = mutex_lock_interruptible(&haptic->mutex); + if (error) + return error; + + max77843_haptic_disable(haptic); + + haptic->suspended = true; + + mutex_unlock(&haptic->mutex); + + return 0; +} + +static int __maybe_unused max77843_haptic_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct max77843_haptic *haptic = platform_get_drvdata(pdev); + unsigned int magnitude; + + mutex_lock(&haptic->mutex); + + haptic->suspended = false; + + magnitude = ACCESS_ONCE(haptic->magnitude); + if (magnitude) + max77843_haptic_enable(haptic); + + mutex_unlock(&haptic->mutex); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(max77843_haptic_pm_ops, + max77843_haptic_suspend, max77843_haptic_resume); + +static struct platform_driver max77843_haptic_driver = { + .driver = { + .name = "max77843-haptic", + .pm = &max77843_haptic_pm_ops, + }, + .probe = max77843_haptic_probe, +}; +module_platform_driver(max77843_haptic_driver); + +MODULE_AUTHOR("Jaewon Kim <jaewon02.kim@samsung.com>"); +MODULE_DESCRIPTION("MAXIM MAX77843 Haptic driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/misc/mma8450.c b/drivers/input/misc/mma8450.c index 59d4dcd..19c7357 100644 --- a/drivers/input/misc/mma8450.c +++ b/drivers/input/misc/mma8450.c @@ -174,12 +174,13 @@ static int mma8450_probe(struct i2c_client *c, struct mma8450 *m; int err; - m = kzalloc(sizeof(struct mma8450), GFP_KERNEL); - idev = input_allocate_polled_device(); - if (!m || !idev) { - err = -ENOMEM; - goto err_free_mem; - } + m = devm_kzalloc(&c->dev, sizeof(*m), GFP_KERNEL); + if (!m) + return -ENOMEM; + + idev = devm_input_allocate_polled_device(&c->dev); + if (!idev) + return -ENOMEM; m->client = c; m->idev = idev; @@ -201,29 +202,12 @@ static int mma8450_probe(struct i2c_client *c, err = input_register_polled_device(idev); if (err) { dev_err(&c->dev, "failed to register polled input device\n"); - goto err_free_mem; + return err; } i2c_set_clientdata(c, m); return 0; - -err_free_mem: - input_free_polled_device(idev); - kfree(m); - return err; -} - -static int mma8450_remove(struct i2c_client *c) -{ - struct mma8450 *m = i2c_get_clientdata(c); - struct input_polled_dev *idev = m->idev; - - input_unregister_polled_device(idev); - input_free_polled_device(idev); - kfree(m); - - return 0; } static const struct i2c_device_id mma8450_id[] = { @@ -241,11 +225,9 @@ MODULE_DEVICE_TABLE(of, mma8450_dt_ids); static struct i2c_driver mma8450_driver = { .driver = { .name = MMA8450_DRV_NAME, - .owner = THIS_MODULE, .of_match_table = mma8450_dt_ids, }, .probe = mma8450_probe, - .remove = mma8450_remove, .id_table = mma8450_id, }; diff --git a/drivers/input/misc/palmas-pwrbutton.c b/drivers/input/misc/palmas-pwrbutton.c index 1f9b5ee..1e1baed 100644 --- a/drivers/input/misc/palmas-pwrbutton.c +++ b/drivers/input/misc/palmas-pwrbutton.c @@ -304,7 +304,7 @@ static SIMPLE_DEV_PM_OPS(palmas_pwron_pm, palmas_pwron_suspend, palmas_pwron_resume); #ifdef CONFIG_OF -static struct of_device_id of_palmas_pwr_match[] = { +static const struct of_device_id of_palmas_pwr_match[] = { { .compatible = "ti,palmas-pwrbutton" }, { }, }; diff --git a/drivers/input/misc/pm8941-pwrkey.c b/drivers/input/misc/pm8941-pwrkey.c new file mode 100644 index 0000000..867db8a --- /dev/null +++ b/drivers/input/misc/pm8941-pwrkey.c @@ -0,0 +1,293 @@ +/* + * Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * Copyright (c) 2014, Sony Mobile Communications Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/log2.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/reboot.h> +#include <linux/regmap.h> + +#define PON_REV2 0x01 + +#define PON_RT_STS 0x10 +#define PON_KPDPWR_N_SET BIT(0) + +#define PON_PS_HOLD_RST_CTL 0x5a +#define PON_PS_HOLD_RST_CTL2 0x5b +#define PON_PS_HOLD_ENABLE BIT(7) +#define PON_PS_HOLD_TYPE_MASK 0x0f +#define PON_PS_HOLD_TYPE_SHUTDOWN 4 +#define PON_PS_HOLD_TYPE_HARD_RESET 7 + +#define PON_PULL_CTL 0x70 +#define PON_KPDPWR_PULL_UP BIT(1) + +#define PON_DBC_CTL 0x71 +#define PON_DBC_DELAY_MASK 0x7 + + +struct pm8941_pwrkey { + struct device *dev; + int irq; + u32 baseaddr; + struct regmap *regmap; + struct input_dev *input; + + unsigned int revision; + struct notifier_block reboot_notifier; +}; + +static int pm8941_reboot_notify(struct notifier_block *nb, + unsigned long code, void *unused) +{ + struct pm8941_pwrkey *pwrkey = container_of(nb, struct pm8941_pwrkey, + reboot_notifier); + unsigned int enable_reg; + unsigned int reset_type; + int error; + + /* PMICs with revision 0 have the enable bit in same register as ctrl */ + if (pwrkey->revision == 0) + enable_reg = PON_PS_HOLD_RST_CTL; + else + enable_reg = PON_PS_HOLD_RST_CTL2; + + error = regmap_update_bits(pwrkey->regmap, + pwrkey->baseaddr + enable_reg, + PON_PS_HOLD_ENABLE, + 0); + if (error) + dev_err(pwrkey->dev, + "unable to clear ps hold reset enable: %d\n", + error); + + /* + * Updates of PON_PS_HOLD_ENABLE requires 3 sleep cycles between + * writes. + */ + usleep_range(100, 1000); + + switch (code) { + case SYS_HALT: + case SYS_POWER_OFF: + reset_type = PON_PS_HOLD_TYPE_SHUTDOWN; + break; + case SYS_RESTART: + default: + reset_type = PON_PS_HOLD_TYPE_HARD_RESET; + break; + }; + + error = regmap_update_bits(pwrkey->regmap, + pwrkey->baseaddr + PON_PS_HOLD_RST_CTL, + PON_PS_HOLD_TYPE_MASK, + reset_type); + if (error) + dev_err(pwrkey->dev, "unable to set ps hold reset type: %d\n", + error); + + error = regmap_update_bits(pwrkey->regmap, + pwrkey->baseaddr + enable_reg, + PON_PS_HOLD_ENABLE, + PON_PS_HOLD_ENABLE); + if (error) + dev_err(pwrkey->dev, "unable to re-set enable: %d\n", error); + + return NOTIFY_DONE; +} + +static irqreturn_t pm8941_pwrkey_irq(int irq, void *_data) +{ + struct pm8941_pwrkey *pwrkey = _data; + unsigned int sts; + int error; + + error = regmap_read(pwrkey->regmap, + pwrkey->baseaddr + PON_RT_STS, &sts); + if (error) + return IRQ_HANDLED; + + input_report_key(pwrkey->input, KEY_POWER, !!(sts & PON_KPDPWR_N_SET)); + input_sync(pwrkey->input); + + return IRQ_HANDLED; +} + +static int __maybe_unused pm8941_pwrkey_suspend(struct device *dev) +{ + struct pm8941_pwrkey *pwrkey = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + enable_irq_wake(pwrkey->irq); + + return 0; +} + +static int __maybe_unused pm8941_pwrkey_resume(struct device *dev) +{ + struct pm8941_pwrkey *pwrkey = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + disable_irq_wake(pwrkey->irq); + + return 0; +} + +static SIMPLE_DEV_PM_OPS(pm8941_pwr_key_pm_ops, + pm8941_pwrkey_suspend, pm8941_pwrkey_resume); + +static int pm8941_pwrkey_probe(struct platform_device *pdev) +{ + struct pm8941_pwrkey *pwrkey; + bool pull_up; + u32 req_delay; + int error; + + if (of_property_read_u32(pdev->dev.of_node, "debounce", &req_delay)) + req_delay = 15625; + + if (req_delay > 2000000 || req_delay == 0) { + dev_err(&pdev->dev, "invalid debounce time: %u\n", req_delay); + return -EINVAL; + } + + pull_up = of_property_read_bool(pdev->dev.of_node, "bias-pull-up"); + + pwrkey = devm_kzalloc(&pdev->dev, sizeof(*pwrkey), GFP_KERNEL); + if (!pwrkey) + return -ENOMEM; + + pwrkey->dev = &pdev->dev; + + pwrkey->regmap = dev_get_regmap(pdev->dev.parent, NULL); + if (!pwrkey->regmap) { + dev_err(&pdev->dev, "failed to locate regmap\n"); + return -ENODEV; + } + + pwrkey->irq = platform_get_irq(pdev, 0); + if (pwrkey->irq < 0) { + dev_err(&pdev->dev, "failed to get irq\n"); + return pwrkey->irq; + } + + error = of_property_read_u32(pdev->dev.of_node, "reg", + &pwrkey->baseaddr); + if (error) + return error; + + error = regmap_read(pwrkey->regmap, pwrkey->baseaddr + PON_REV2, + &pwrkey->revision); + if (error) { + dev_err(&pdev->dev, "failed to set debounce: %d\n", error); + return error; + } + + pwrkey->input = devm_input_allocate_device(&pdev->dev); + if (!pwrkey->input) { + dev_dbg(&pdev->dev, "unable to allocate input device\n"); + return -ENOMEM; + } + + input_set_capability(pwrkey->input, EV_KEY, KEY_POWER); + + pwrkey->input->name = "pm8941_pwrkey"; + pwrkey->input->phys = "pm8941_pwrkey/input0"; + + req_delay = (req_delay << 6) / USEC_PER_SEC; + req_delay = ilog2(req_delay); + + error = regmap_update_bits(pwrkey->regmap, + pwrkey->baseaddr + PON_DBC_CTL, + PON_DBC_DELAY_MASK, + req_delay); + if (error) { + dev_err(&pdev->dev, "failed to set debounce: %d\n", error); + return error; + } + + error = regmap_update_bits(pwrkey->regmap, + pwrkey->baseaddr + PON_PULL_CTL, + PON_KPDPWR_PULL_UP, + pull_up ? PON_KPDPWR_PULL_UP : 0); + if (error) { + dev_err(&pdev->dev, "failed to set pull: %d\n", error); + return error; + } + + error = devm_request_threaded_irq(&pdev->dev, pwrkey->irq, + NULL, pm8941_pwrkey_irq, + IRQF_ONESHOT, + "pm8941_pwrkey", pwrkey); + if (error) { + dev_err(&pdev->dev, "failed requesting IRQ: %d\n", error); + return error; + } + + error = input_register_device(pwrkey->input); + if (error) { + dev_err(&pdev->dev, "failed to register input device: %d\n", + error); + return error; + } + + pwrkey->reboot_notifier.notifier_call = pm8941_reboot_notify, + error = register_reboot_notifier(&pwrkey->reboot_notifier); + if (error) { + dev_err(&pdev->dev, "failed to register reboot notifier: %d\n", + error); + return error; + } + + platform_set_drvdata(pdev, pwrkey); + device_init_wakeup(&pdev->dev, 1); + + return 0; +} + +static int pm8941_pwrkey_remove(struct platform_device *pdev) +{ + struct pm8941_pwrkey *pwrkey = platform_get_drvdata(pdev); + + device_init_wakeup(&pdev->dev, 0); + unregister_reboot_notifier(&pwrkey->reboot_notifier); + + return 0; +} + +static const struct of_device_id pm8941_pwr_key_id_table[] = { + { .compatible = "qcom,pm8941-pwrkey" }, + { } +}; +MODULE_DEVICE_TABLE(of, pm8941_pwr_key_id_table); + +static struct platform_driver pm8941_pwrkey_driver = { + .probe = pm8941_pwrkey_probe, + .remove = pm8941_pwrkey_remove, + .driver = { + .name = "pm8941-pwrkey", + .pm = &pm8941_pwr_key_pm_ops, + .of_match_table = of_match_ptr(pm8941_pwr_key_id_table), + }, +}; +module_platform_driver(pm8941_pwrkey_driver); + +MODULE_DESCRIPTION("PM8941 Power Key driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/misc/pwm-beeper.c b/drivers/input/misc/pwm-beeper.c index a28ee70..e82edf8 100644 --- a/drivers/input/misc/pwm-beeper.c +++ b/drivers/input/misc/pwm-beeper.c @@ -50,7 +50,6 @@ static int pwm_beeper_event(struct input_dev *input, } if (value == 0) { - pwm_config(beeper->pwm, 0, 0); pwm_disable(beeper->pwm); } else { period = HZ_TO_NANOSECONDS(value); @@ -169,12 +168,6 @@ static int __maybe_unused pwm_beeper_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(pwm_beeper_pm_ops, pwm_beeper_suspend, pwm_beeper_resume); -#ifdef CONFIG_PM_SLEEP -#define PWM_BEEPER_PM_OPS (&pwm_beeper_pm_ops) -#else -#define PWM_BEEPER_PM_OPS NULL -#endif - #ifdef CONFIG_OF static const struct of_device_id pwm_beeper_match[] = { { .compatible = "pwm-beeper", }, @@ -187,7 +180,7 @@ static struct platform_driver pwm_beeper_driver = { .remove = pwm_beeper_remove, .driver = { .name = "pwm-beeper", - .pm = PWM_BEEPER_PM_OPS, + .pm = &pwm_beeper_pm_ops, .of_match_table = of_match_ptr(pwm_beeper_match), }, }; diff --git a/drivers/input/misc/regulator-haptic.c b/drivers/input/misc/regulator-haptic.c index 132eb91..6bf3f10 100644 --- a/drivers/input/misc/regulator-haptic.c +++ b/drivers/input/misc/regulator-haptic.c @@ -245,7 +245,7 @@ static int __maybe_unused regulator_haptic_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(regulator_haptic_pm_ops, regulator_haptic_suspend, regulator_haptic_resume); -static struct of_device_id regulator_haptic_dt_match[] = { +static const struct of_device_id regulator_haptic_dt_match[] = { { .compatible = "regulator-haptic" }, { /* sentinel */ }, }; diff --git a/drivers/input/misc/tps65218-pwrbutton.c b/drivers/input/misc/tps65218-pwrbutton.c index 54508de..a39b626 100644 --- a/drivers/input/misc/tps65218-pwrbutton.c +++ b/drivers/input/misc/tps65218-pwrbutton.c @@ -106,7 +106,7 @@ static int tps65218_pwron_probe(struct platform_device *pdev) return 0; } -static struct of_device_id of_tps65218_pwr_match[] = { +static const struct of_device_id of_tps65218_pwr_match[] = { { .compatible = "ti,tps65218-pwrbutton" }, { }, }; diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c index d28726a..e6708f6 100644 --- a/drivers/input/mouse/alps.c +++ b/drivers/input/mouse/alps.c @@ -153,10 +153,18 @@ static const struct alps_protocol_info alps_v7_protocol_data = { ALPS_PROTO_V7, 0x48, 0x48, ALPS_DUALPOINT }; +static const struct alps_protocol_info alps_v8_protocol_data = { + ALPS_PROTO_V8, 0x18, 0x18, 0 +}; + static void alps_set_abs_params_st(struct alps_data *priv, struct input_dev *dev1); static void alps_set_abs_params_mt(struct alps_data *priv, struct input_dev *dev1); +static void alps_set_abs_params_v7(struct alps_data *priv, + struct input_dev *dev1); +static void alps_set_abs_params_ss4_v2(struct alps_data *priv, + struct input_dev *dev1); /* Packet formats are described in Documentation/input/alps.txt */ @@ -243,6 +251,14 @@ static void alps_process_packet_v1_v2(struct psmouse *psmouse) return; } + /* Non interleaved V2 dualpoint has separate stick button bits */ + if (priv->proto_version == ALPS_PROTO_V2 && + priv->flags == (ALPS_PASS | ALPS_DUALPOINT)) { + left |= packet[0] & 1; + right |= packet[0] & 2; + middle |= packet[0] & 4; + } + alps_report_buttons(dev, dev2, left, right, middle); /* Convert hardware tap to a reasonable Z value */ @@ -1085,6 +1101,176 @@ static void alps_process_packet_v7(struct psmouse *psmouse) alps_process_touchpad_packet_v7(psmouse); } +static unsigned char alps_get_pkt_id_ss4_v2(unsigned char *byte) +{ + unsigned char pkt_id = SS4_PACKET_ID_IDLE; + + if (byte[0] == 0x18 && byte[1] == 0x10 && byte[2] == 0x00 && + (byte[3] & 0x88) == 0x08 && byte[4] == 0x10 && byte[5] == 0x00) { + pkt_id = SS4_PACKET_ID_IDLE; + } else if (!(byte[3] & 0x10)) { + pkt_id = SS4_PACKET_ID_ONE; + } else if (!(byte[3] & 0x20)) { + pkt_id = SS4_PACKET_ID_TWO; + } else { + pkt_id = SS4_PACKET_ID_MULTI; + } + + return pkt_id; +} + +static int alps_decode_ss4_v2(struct alps_fields *f, + unsigned char *p, struct psmouse *psmouse) +{ + struct alps_data *priv = psmouse->private; + unsigned char pkt_id; + unsigned int no_data_x, no_data_y; + + pkt_id = alps_get_pkt_id_ss4_v2(p); + + /* Current packet is 1Finger coordinate packet */ + switch (pkt_id) { + case SS4_PACKET_ID_ONE: + f->mt[0].x = SS4_1F_X_V2(p); + f->mt[0].y = SS4_1F_Y_V2(p); + f->pressure = ((SS4_1F_Z_V2(p)) * 2) & 0x7f; + f->fingers = 1; + f->first_mp = 0; + f->is_mp = 0; + break; + + case SS4_PACKET_ID_TWO: + if (priv->flags & ALPS_BUTTONPAD) { + f->mt[0].x = SS4_BTL_MF_X_V2(p, 0); + f->mt[0].y = SS4_BTL_MF_Y_V2(p, 0); + f->mt[1].x = SS4_BTL_MF_X_V2(p, 1); + f->mt[1].y = SS4_BTL_MF_Y_V2(p, 1); + } else { + f->mt[0].x = SS4_STD_MF_X_V2(p, 0); + f->mt[0].y = SS4_STD_MF_Y_V2(p, 0); + f->mt[1].x = SS4_STD_MF_X_V2(p, 1); + f->mt[1].y = SS4_STD_MF_Y_V2(p, 1); + } + f->pressure = SS4_MF_Z_V2(p, 0) ? 0x30 : 0; + + if (SS4_IS_MF_CONTINUE(p)) { + f->first_mp = 1; + } else { + f->fingers = 2; + f->first_mp = 0; + } + f->is_mp = 0; + + break; + + case SS4_PACKET_ID_MULTI: + if (priv->flags & ALPS_BUTTONPAD) { + f->mt[2].x = SS4_BTL_MF_X_V2(p, 0); + f->mt[2].y = SS4_BTL_MF_Y_V2(p, 0); + f->mt[3].x = SS4_BTL_MF_X_V2(p, 1); + f->mt[3].y = SS4_BTL_MF_Y_V2(p, 1); + no_data_x = SS4_MFPACKET_NO_AX_BL; + no_data_y = SS4_MFPACKET_NO_AY_BL; + } else { + f->mt[2].x = SS4_STD_MF_X_V2(p, 0); + f->mt[2].y = SS4_STD_MF_Y_V2(p, 0); + f->mt[3].x = SS4_STD_MF_X_V2(p, 1); + f->mt[3].y = SS4_STD_MF_Y_V2(p, 1); + no_data_x = SS4_MFPACKET_NO_AX; + no_data_y = SS4_MFPACKET_NO_AY; + } + + f->first_mp = 0; + f->is_mp = 1; + + if (SS4_IS_5F_DETECTED(p)) { + f->fingers = 5; + } else if (f->mt[3].x == no_data_x && + f->mt[3].y == no_data_y) { + f->mt[3].x = 0; + f->mt[3].y = 0; + f->fingers = 3; + } else { + f->fingers = 4; + } + break; + + case SS4_PACKET_ID_IDLE: + default: + memset(f, 0, sizeof(struct alps_fields)); + break; + } + + f->left = !!(SS4_BTN_V2(p) & 0x01); + if (!(priv->flags & ALPS_BUTTONPAD)) { + f->right = !!(SS4_BTN_V2(p) & 0x02); + f->middle = !!(SS4_BTN_V2(p) & 0x04); + } + + return 0; +} + +static void alps_process_packet_ss4_v2(struct psmouse *psmouse) +{ + struct alps_data *priv = psmouse->private; + unsigned char *packet = psmouse->packet; + struct input_dev *dev = psmouse->dev; + struct alps_fields *f = &priv->f; + + memset(f, 0, sizeof(struct alps_fields)); + priv->decode_fields(f, packet, psmouse); + if (priv->multi_packet) { + /* + * Sometimes the first packet will indicate a multi-packet + * sequence, but sometimes the next multi-packet would not + * come. Check for this, and when it happens process the + * position packet as usual. + */ + if (f->is_mp) { + /* Now process the 1st packet */ + priv->decode_fields(f, priv->multi_data, psmouse); + } else { + priv->multi_packet = 0; + } + } + + /* + * "f.is_mp" would always be '0' after merging the 1st and 2nd packet. + * When it is set, it means 2nd packet comes without 1st packet come. + */ + if (f->is_mp) + return; + + /* Save the first packet */ + if (!priv->multi_packet && f->first_mp) { + priv->multi_packet = 1; + memcpy(priv->multi_data, packet, sizeof(priv->multi_data)); + return; + } + + priv->multi_packet = 0; + + alps_report_mt_data(psmouse, (f->fingers <= 4) ? f->fingers : 4); + + input_mt_report_finger_count(dev, f->fingers); + + input_report_key(dev, BTN_LEFT, f->left); + input_report_key(dev, BTN_RIGHT, f->right); + input_report_key(dev, BTN_MIDDLE, f->middle); + + input_report_abs(dev, ABS_PRESSURE, f->pressure); + input_sync(dev); +} + +static bool alps_is_valid_package_ss4_v2(struct psmouse *psmouse) +{ + if (psmouse->pktcnt == 4 && ((psmouse->packet[3] & 0x08) != 0x08)) + return false; + if (psmouse->pktcnt == 6 && ((psmouse->packet[5] & 0x10) != 0x0)) + return false; + return true; +} + static DEFINE_MUTEX(alps_mutex); static void alps_register_bare_ps2_mouse(struct work_struct *work) @@ -1154,12 +1340,31 @@ out: mutex_unlock(&alps_mutex); } -static void alps_report_bare_ps2_packet(struct input_dev *dev, +static void alps_report_bare_ps2_packet(struct psmouse *psmouse, unsigned char packet[], bool report_buttons) { + struct alps_data *priv = psmouse->private; + struct input_dev *dev, *dev2 = NULL; + + /* Figure out which device to use to report the bare packet */ + if (priv->proto_version == ALPS_PROTO_V2 && + (priv->flags & ALPS_DUALPOINT)) { + /* On V2 devices the DualPoint Stick reports bare packets */ + dev = priv->dev2; + dev2 = psmouse->dev; + } else if (unlikely(IS_ERR_OR_NULL(priv->dev3))) { + /* Register dev3 mouse if we received PS/2 packet first time */ + if (!IS_ERR(priv->dev3)) + psmouse_queue_work(psmouse, &priv->dev3_register_work, + 0); + return; + } else { + dev = priv->dev3; + } + if (report_buttons) - alps_report_buttons(dev, NULL, + alps_report_buttons(dev, dev2, packet[0] & 1, packet[0] & 2, packet[0] & 4); input_report_rel(dev, REL_X, @@ -1232,8 +1437,8 @@ static psmouse_ret_t alps_handle_interleaved_ps2(struct psmouse *psmouse) * de-synchronization. */ - alps_report_bare_ps2_packet(priv->dev2, - &psmouse->packet[3], false); + alps_report_bare_ps2_packet(psmouse, &psmouse->packet[3], + false); /* * Continue with the standard ALPS protocol handling, @@ -1287,20 +1492,15 @@ static psmouse_ret_t alps_process_byte(struct psmouse *psmouse) * a device connected to the external PS/2 port. Because bare PS/2 * protocol does not have enough constant bits to self-synchronize * properly we only do this if the device is fully synchronized. + * Can not distinguish V8's first byte from PS/2 packet's */ - if (!psmouse->out_of_sync_cnt && (psmouse->packet[0] & 0xc8) == 0x08) { - - /* Register dev3 mouse if we received PS/2 packet first time */ - if (unlikely(!priv->dev3)) - psmouse_queue_work(psmouse, - &priv->dev3_register_work, 0); + if (priv->proto_version != ALPS_PROTO_V8 && + !psmouse->out_of_sync_cnt && + (psmouse->packet[0] & 0xc8) == 0x08) { if (psmouse->pktcnt == 3) { - /* Once dev3 mouse device is registered report data */ - if (likely(!IS_ERR_OR_NULL(priv->dev3))) - alps_report_bare_ps2_packet(priv->dev3, - psmouse->packet, - true); + alps_report_bare_ps2_packet(psmouse, psmouse->packet, + true); return PSMOUSE_FULL_PACKET; } return PSMOUSE_GOOD_DATA; @@ -1345,8 +1545,10 @@ static psmouse_ret_t alps_process_byte(struct psmouse *psmouse) return PSMOUSE_BAD_DATA; } - if (priv->proto_version == ALPS_PROTO_V7 && - !alps_is_valid_package_v7(psmouse)) { + if ((priv->proto_version == ALPS_PROTO_V7 && + !alps_is_valid_package_v7(psmouse)) || + (priv->proto_version == ALPS_PROTO_V8 && + !alps_is_valid_package_ss4_v2(psmouse))) { psmouse_dbg(psmouse, "refusing packet[%i] = %x\n", psmouse->pktcnt - 1, psmouse->packet[psmouse->pktcnt - 1]); @@ -2121,6 +2323,88 @@ error: return -1; } +static int alps_get_otp_values_ss4_v2(struct psmouse *psmouse, + unsigned char index, unsigned char otp[]) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + + switch (index) { + case 0: + if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM) || + ps2_command(ps2dev, otp, PSMOUSE_CMD_GETINFO)) + return -1; + + break; + + case 1: + if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETPOLL) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETPOLL) || + ps2_command(ps2dev, otp, PSMOUSE_CMD_GETINFO)) + return -1; + + break; + } + + return 0; +} + +static int alps_update_device_area_ss4_v2(unsigned char otp[][4], + struct alps_data *priv) +{ + int num_x_electrode; + int num_y_electrode; + int x_pitch, y_pitch, x_phys, y_phys; + + num_x_electrode = SS4_NUMSENSOR_XOFFSET + (otp[1][0] & 0x0F); + num_y_electrode = SS4_NUMSENSOR_YOFFSET + ((otp[1][0] >> 4) & 0x0F); + + priv->x_max = (num_x_electrode - 1) * SS4_COUNT_PER_ELECTRODE; + priv->y_max = (num_y_electrode - 1) * SS4_COUNT_PER_ELECTRODE; + + x_pitch = ((otp[1][2] >> 2) & 0x07) + SS4_MIN_PITCH_MM; + y_pitch = ((otp[1][2] >> 5) & 0x07) + SS4_MIN_PITCH_MM; + + x_phys = x_pitch * (num_x_electrode - 1); /* In 0.1 mm units */ + y_phys = y_pitch * (num_y_electrode - 1); /* In 0.1 mm units */ + + priv->x_res = priv->x_max * 10 / x_phys; /* units / mm */ + priv->y_res = priv->y_max * 10 / y_phys; /* units / mm */ + + return 0; +} + +static int alps_update_btn_info_ss4_v2(unsigned char otp[][4], + struct alps_data *priv) +{ + unsigned char is_btnless; + + is_btnless = (otp[1][1] >> 3) & 0x01; + + if (is_btnless) + priv->flags |= ALPS_BUTTONPAD; + + return 0; +} + +static int alps_set_defaults_ss4_v2(struct psmouse *psmouse, + struct alps_data *priv) +{ + unsigned char otp[2][4]; + + memset(otp, 0, sizeof(otp)); + + if (alps_get_otp_values_ss4_v2(psmouse, 0, &otp[0][0]) || + alps_get_otp_values_ss4_v2(psmouse, 1, &otp[1][0])) + return -1; + + alps_update_device_area_ss4_v2(otp, priv); + + alps_update_btn_info_ss4_v2(otp, priv); + + return 0; +} + static int alps_dolphin_get_device_area(struct psmouse *psmouse, struct alps_data *priv) { @@ -2213,6 +2497,35 @@ error: return ret; } +static int alps_hw_init_ss4_v2(struct psmouse *psmouse) +{ + struct ps2dev *ps2dev = &psmouse->ps2dev; + char param[2] = {0x64, 0x28}; + int ret = -1; + + /* enter absolute mode */ + if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM) || + ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM) || + ps2_command(ps2dev, ¶m[0], PSMOUSE_CMD_SETRATE) || + ps2_command(ps2dev, ¶m[1], PSMOUSE_CMD_SETRATE)) { + goto error; + } + + /* T.B.D. Decread noise packet number, delete in the future */ + if (alps_exit_command_mode(psmouse) || + alps_enter_command_mode(psmouse) || + alps_command_mode_write_reg(psmouse, 0x001D, 0x20)) { + goto error; + } + alps_exit_command_mode(psmouse); + + return ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE); + +error: + alps_exit_command_mode(psmouse); + return ret; +} + static int alps_set_protocol(struct psmouse *psmouse, struct alps_data *priv, const struct alps_protocol_info *protocol) @@ -2281,10 +2594,12 @@ static int alps_set_protocol(struct psmouse *psmouse, priv->set_abs_params = alps_set_abs_params_mt; priv->nibble_commands = alps_v3_nibble_commands; priv->addr_command = PSMOUSE_CMD_RESET_WRAP; - priv->x_max = 1360; - priv->y_max = 660; priv->x_bits = 23; priv->y_bits = 12; + + if (alps_dolphin_get_device_area(psmouse, priv)) + return -EIO; + break; case ALPS_PROTO_V6: @@ -2300,17 +2615,29 @@ static int alps_set_protocol(struct psmouse *psmouse, priv->hw_init = alps_hw_init_v7; priv->process_packet = alps_process_packet_v7; priv->decode_fields = alps_decode_packet_v7; - priv->set_abs_params = alps_set_abs_params_mt; + priv->set_abs_params = alps_set_abs_params_v7; priv->nibble_commands = alps_v3_nibble_commands; priv->addr_command = PSMOUSE_CMD_RESET_WRAP; - - if (alps_dolphin_get_device_area(psmouse, priv)) - return -EIO; + priv->x_max = 0xfff; + priv->y_max = 0x7ff; if (priv->fw_ver[1] != 0xba) priv->flags |= ALPS_BUTTONPAD; break; + + case ALPS_PROTO_V8: + priv->hw_init = alps_hw_init_ss4_v2; + priv->process_packet = alps_process_packet_ss4_v2; + priv->decode_fields = alps_decode_ss4_v2; + priv->set_abs_params = alps_set_abs_params_ss4_v2; + priv->nibble_commands = alps_v3_nibble_commands; + priv->addr_command = PSMOUSE_CMD_RESET_WRAP; + + if (alps_set_defaults_ss4_v2(psmouse, priv)) + return -EIO; + + break; } return 0; @@ -2379,6 +2706,9 @@ static int alps_identify(struct psmouse *psmouse, struct alps_data *priv) } else if (ec[0] == 0x88 && ec[1] == 0x07 && ec[2] >= 0x90 && ec[2] <= 0x9d) { protocol = &alps_v3_protocol_data; + } else if (e7[0] == 0x73 && e7[1] == 0x03 && + e7[2] == 0x14 && ec[1] == 0x02) { + protocol = &alps_v8_protocol_data; } else { psmouse_dbg(psmouse, "Likely not an ALPS touchpad: E7=%3ph, EC=%3ph\n", e7, ec); @@ -2427,10 +2757,11 @@ static void alps_set_abs_params_st(struct alps_data *priv, { input_set_abs_params(dev1, ABS_X, 0, priv->x_max, 0, 0); input_set_abs_params(dev1, ABS_Y, 0, priv->y_max, 0, 0); + input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0); } -static void alps_set_abs_params_mt(struct alps_data *priv, - struct input_dev *dev1) +static void alps_set_abs_params_mt_common(struct alps_data *priv, + struct input_dev *dev1) { input_set_abs_params(dev1, ABS_MT_POSITION_X, 0, priv->x_max, 0, 0); input_set_abs_params(dev1, ABS_MT_POSITION_Y, 0, priv->y_max, 0, 0); @@ -2438,15 +2769,44 @@ static void alps_set_abs_params_mt(struct alps_data *priv, input_abs_set_res(dev1, ABS_MT_POSITION_X, priv->x_res); input_abs_set_res(dev1, ABS_MT_POSITION_Y, priv->y_res); - input_mt_init_slots(dev1, MAX_TOUCHES, INPUT_MT_POINTER | - INPUT_MT_DROP_UNUSED | INPUT_MT_TRACK | INPUT_MT_SEMI_MT); - set_bit(BTN_TOOL_TRIPLETAP, dev1->keybit); set_bit(BTN_TOOL_QUADTAP, dev1->keybit); +} + +static void alps_set_abs_params_mt(struct alps_data *priv, + struct input_dev *dev1) +{ + alps_set_abs_params_mt_common(priv, dev1); + input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0); + + input_mt_init_slots(dev1, MAX_TOUCHES, + INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED | + INPUT_MT_TRACK | INPUT_MT_SEMI_MT); +} - /* V7 is real multi-touch */ - if (priv->proto_version == ALPS_PROTO_V7) - clear_bit(INPUT_PROP_SEMI_MT, dev1->propbit); +static void alps_set_abs_params_v7(struct alps_data *priv, + struct input_dev *dev1) +{ + alps_set_abs_params_mt_common(priv, dev1); + set_bit(BTN_TOOL_QUINTTAP, dev1->keybit); + + input_mt_init_slots(dev1, MAX_TOUCHES, + INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED | + INPUT_MT_TRACK); + + set_bit(BTN_TOOL_QUINTTAP, dev1->keybit); +} + +static void alps_set_abs_params_ss4_v2(struct alps_data *priv, + struct input_dev *dev1) +{ + alps_set_abs_params_mt_common(priv, dev1); + input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0); + set_bit(BTN_TOOL_QUINTTAP, dev1->keybit); + + input_mt_init_slots(dev1, MAX_TOUCHES, + INPUT_MT_POINTER | INPUT_MT_DROP_UNUSED | + INPUT_MT_TRACK); } int alps_init(struct psmouse *psmouse) @@ -2479,9 +2839,6 @@ int alps_init(struct psmouse *psmouse) dev1->evbit[BIT_WORD(EV_ABS)] |= BIT_MASK(EV_ABS); priv->set_abs_params(priv, dev1); - /* No pressure on V7 */ - if (priv->proto_version != ALPS_PROTO_V7) - input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0); if (priv->flags & ALPS_WHEEL) { dev1->evbit[BIT_WORD(EV_REL)] |= BIT_MASK(EV_REL); @@ -2605,8 +2962,10 @@ int alps_detect(struct psmouse *psmouse, bool set_properties) return -ENOMEM; error = alps_identify(psmouse, priv); - if (error) + if (error) { + kfree(priv); return error; + } if (set_properties) { psmouse->vendor = "ALPS"; diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h index 02513c0..6dfdccc 100644 --- a/drivers/input/mouse/alps.h +++ b/drivers/input/mouse/alps.h @@ -22,14 +22,90 @@ #define ALPS_PROTO_V5 0x500 #define ALPS_PROTO_V6 0x600 #define ALPS_PROTO_V7 0x700 /* t3btl t4s */ +#define ALPS_PROTO_V8 0x800 /* SS4btl SS4s */ -#define MAX_TOUCHES 2 +#define MAX_TOUCHES 4 #define DOLPHIN_COUNT_PER_ELECTRODE 64 #define DOLPHIN_PROFILE_XOFFSET 8 /* x-electrode offset */ #define DOLPHIN_PROFILE_YOFFSET 1 /* y-electrode offset */ /* + * enum SS4_PACKET_ID - defines the packet type for V8 + * SS4_PACKET_ID_IDLE: There's no finger and no button activity. + * SS4_PACKET_ID_ONE: There's one finger on touchpad + * or there's button activities. + * SS4_PACKET_ID_TWO: There's two or more fingers on touchpad + * SS4_PACKET_ID_MULTI: There's three or more fingers on touchpad +*/ +enum SS4_PACKET_ID { + SS4_PACKET_ID_IDLE = 0, + SS4_PACKET_ID_ONE, + SS4_PACKET_ID_TWO, + SS4_PACKET_ID_MULTI, +}; + +#define SS4_COUNT_PER_ELECTRODE 256 +#define SS4_NUMSENSOR_XOFFSET 7 +#define SS4_NUMSENSOR_YOFFSET 7 +#define SS4_MIN_PITCH_MM 50 + +#define SS4_MASK_NORMAL_BUTTONS 0x07 + +#define SS4_1F_X_V2(_b) ((_b[0] & 0x0007) | \ + ((_b[1] << 3) & 0x0078) | \ + ((_b[1] << 2) & 0x0380) | \ + ((_b[2] << 5) & 0x1C00) \ + ) + +#define SS4_1F_Y_V2(_b) (((_b[2]) & 0x000F) | \ + ((_b[3] >> 2) & 0x0030) | \ + ((_b[4] << 6) & 0x03C0) | \ + ((_b[4] << 5) & 0x0C00) \ + ) + +#define SS4_1F_Z_V2(_b) (((_b[5]) & 0x0F) | \ + ((_b[5] >> 1) & 0x70) | \ + ((_b[4]) & 0x80) \ + ) + +#define SS4_1F_LFB_V2(_b) (((_b[2] >> 4) & 0x01) == 0x01) + +#define SS4_MF_LF_V2(_b, _i) ((_b[1 + (_i) * 3] & 0x0004) == 0x0004) + +#define SS4_BTN_V2(_b) ((_b[0] >> 5) & SS4_MASK_NORMAL_BUTTONS) + +#define SS4_STD_MF_X_V2(_b, _i) (((_b[0 + (_i) * 3] << 5) & 0x00E0) | \ + ((_b[1 + _i * 3] << 5) & 0x1F00) \ + ) + +#define SS4_STD_MF_Y_V2(_b, _i) (((_b[1 + (_i) * 3] << 3) & 0x0010) | \ + ((_b[2 + (_i) * 3] << 5) & 0x01E0) | \ + ((_b[2 + (_i) * 3] << 4) & 0x0E00) \ + ) + +#define SS4_BTL_MF_X_V2(_b, _i) (SS4_STD_MF_X_V2(_b, _i) | \ + ((_b[0 + (_i) * 3] >> 3) & 0x0010) \ + ) + +#define SS4_BTL_MF_Y_V2(_b, _i) (SS4_STD_MF_Y_V2(_b, _i) | \ + ((_b[0 + (_i) * 3] >> 3) & 0x0008) \ + ) + +#define SS4_MF_Z_V2(_b, _i) (((_b[1 + (_i) * 3]) & 0x0001) | \ + ((_b[1 + (_i) * 3] >> 1) & 0x0002) \ + ) + +#define SS4_IS_MF_CONTINUE(_b) ((_b[2] & 0x10) == 0x10) +#define SS4_IS_5F_DETECTED(_b) ((_b[2] & 0x10) == 0x10) + + +#define SS4_MFPACKET_NO_AX 8160 /* X-Coordinate value */ +#define SS4_MFPACKET_NO_AY 4080 /* Y-Coordinate value */ +#define SS4_MFPACKET_NO_AX_BL 8176 /* Buttonless X-Coordinate value */ +#define SS4_MFPACKET_NO_AY_BL 4088 /* Buttonless Y-Coordinate value */ + +/* * enum V7_PACKET_ID - defines the packet type for V7 * V7_PACKET_ID_IDLE: There's no finger and no button activity. * V7_PACKET_ID_TWO: There's one or two non-resting fingers on touchpad diff --git a/drivers/input/mouse/cyapa_gen3.c b/drivers/input/mouse/cyapa_gen3.c index 77e9d70..1e2291c 100644 --- a/drivers/input/mouse/cyapa_gen3.c +++ b/drivers/input/mouse/cyapa_gen3.c @@ -20,7 +20,7 @@ #include <linux/input/mt.h> #include <linux/module.h> #include <linux/slab.h> -#include <linux/unaligned/access_ok.h> +#include <asm/unaligned.h> #include "cyapa.h" diff --git a/drivers/input/mouse/cyapa_gen5.c b/drivers/input/mouse/cyapa_gen5.c index ddf5393..5b611dd 100644 --- a/drivers/input/mouse/cyapa_gen5.c +++ b/drivers/input/mouse/cyapa_gen5.c @@ -17,7 +17,7 @@ #include <linux/mutex.h> #include <linux/completion.h> #include <linux/slab.h> -#include <linux/unaligned/access_ok.h> +#include <asm/unaligned.h> #include <linux/crc-itu-t.h> #include "cyapa.h" @@ -1926,7 +1926,7 @@ static int cyapa_gen5_read_idac_data(struct cyapa *cyapa, electrodes_tx = cyapa->electrodes_x; max_element_cnt = ((cyapa->aligned_electrodes_rx + 7) & ~7u) * electrodes_tx; - } else if (idac_data_type == GEN5_RETRIEVE_SELF_CAP_PWC_DATA) { + } else { offset = 2; max_element_cnt = cyapa->electrodes_x + cyapa->electrodes_y; diff --git a/drivers/input/mouse/elan_i2c.h b/drivers/input/mouse/elan_i2c.h index e100c1b..9b2dc01 100644 --- a/drivers/input/mouse/elan_i2c.h +++ b/drivers/input/mouse/elan_i2c.h @@ -17,7 +17,7 @@ */ #ifndef _ELAN_I2C_H -#define _ELAN_i2C_H +#define _ELAN_I2C_H #include <linux/types.h> diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c index 7ce8bfe..375d98f 100644 --- a/drivers/input/mouse/elan_i2c_core.c +++ b/drivers/input/mouse/elan_i2c_core.c @@ -99,7 +99,7 @@ static int elan_enable_power(struct elan_tp_data *data) error = regulator_enable(data->vcc); if (error) { dev_err(&data->client->dev, - "Failed to enable regulator: %d\n", error); + "failed to enable regulator: %d\n", error); return error; } @@ -111,6 +111,7 @@ static int elan_enable_power(struct elan_tp_data *data) msleep(30); } while (--repeat > 0); + dev_err(&data->client->dev, "failed to enable power: %d\n", error); return error; } @@ -125,7 +126,7 @@ static int elan_disable_power(struct elan_tp_data *data) error = regulator_disable(data->vcc); if (error) { dev_err(&data->client->dev, - "Failed to disable regulator: %d\n", + "failed to disable regulator: %d\n", error); /* Attempt to power the chip back up */ data->ops->power_control(data->client, true); @@ -138,6 +139,7 @@ static int elan_disable_power(struct elan_tp_data *data) msleep(30); } while (--repeat > 0); + dev_err(&data->client->dev, "failed to disable power: %d\n", error); return error; } @@ -196,7 +198,6 @@ static int elan_initialize(struct elan_tp_data *data) if (!error) return 0; - repeat--; msleep(30); } while (--repeat > 0); @@ -1084,16 +1085,18 @@ static int __maybe_unused elan_resume(struct device *dev) } error = elan_enable_power(data); - if (error) + if (error) { dev_err(dev, "power up when resuming failed: %d\n", error); + goto err; + } error = elan_initialize(data); if (error) dev_err(dev, "initialize when resuming failed: %d\n", error); +err: enable_irq(data->client->irq); - - return 0; + return error; } static SIMPLE_DEV_PM_OPS(elan_pm_ops, elan_suspend, elan_resume); diff --git a/drivers/input/mouse/elan_i2c_i2c.c b/drivers/input/mouse/elan_i2c_i2c.c index 029941f..6cf0def 100644 --- a/drivers/input/mouse/elan_i2c_i2c.c +++ b/drivers/input/mouse/elan_i2c_i2c.c @@ -117,7 +117,15 @@ static int elan_i2c_write_cmd(struct i2c_client *client, u16 reg, u16 cmd) int ret; ret = i2c_transfer(client->adapter, &msg, 1); - return ret == 1 ? 0 : (ret < 0 ? ret : -EIO); + if (ret != 1) { + if (ret >= 0) + ret = -EIO; + dev_err(&client->dev, "writing cmd (0x%04x) failed: %d\n", + reg, ret); + return ret; + } + + return 0; } static int elan_i2c_initialize(struct i2c_client *client) diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 6e22682..991dc6b 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -893,6 +893,21 @@ static psmouse_ret_t elantech_process_byte(struct psmouse *psmouse) } /* + * This writes the reg_07 value again to the hardware at the end of every + * set_rate call because the register loses its value. reg_07 allows setting + * absolute mode on v4 hardware + */ +static void elantech_set_rate_restore_reg_07(struct psmouse *psmouse, + unsigned int rate) +{ + struct elantech_data *etd = psmouse->private; + + etd->original_set_rate(psmouse, rate); + if (elantech_write_reg(psmouse, 0x07, etd->reg_07)) + psmouse_err(psmouse, "restoring reg_07 failed\n"); +} + +/* * Put the touchpad into absolute mode */ static int elantech_set_absolute_mode(struct psmouse *psmouse) @@ -1094,6 +1109,8 @@ static int elantech_get_resolution_v4(struct psmouse *psmouse, * Asus K53SV 0x450f01 78, 15, 0c 2 hw buttons * Asus G46VW 0x460f02 00, 18, 0c 2 hw buttons * Asus G750JX 0x360f00 00, 16, 0c 2 hw buttons + * Asus TP500LN 0x381f17 10, 14, 0e clickpad + * Asus X750JN 0x381f17 10, 14, 0e clickpad * Asus UX31 0x361f00 20, 15, 0e clickpad * Asus UX32VD 0x361f02 00, 15, 0e clickpad * Avatar AVIU-145A2 0x361f00 ? clickpad @@ -1635,6 +1652,11 @@ int elantech_init(struct psmouse *psmouse) goto init_fail; } + if (etd->fw_version == 0x381f17) { + etd->original_set_rate = psmouse->set_rate; + psmouse->set_rate = elantech_set_rate_restore_reg_07; + } + if (elantech_set_input_params(psmouse)) { psmouse_err(psmouse, "failed to query touchpad range.\n"); goto init_fail; diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h index 6f3afec..f965d15 100644 --- a/drivers/input/mouse/elantech.h +++ b/drivers/input/mouse/elantech.h @@ -142,6 +142,7 @@ struct elantech_data { struct finger_pos mt[ETP_MAX_FINGERS]; unsigned char parity[256]; int (*send_cmd)(struct psmouse *psmouse, unsigned char c, unsigned char *param); + void (*original_set_rate)(struct psmouse *psmouse, unsigned int rate); }; #ifdef CONFIG_MOUSE_PS2_ELANTECH diff --git a/drivers/input/mouse/focaltech.c b/drivers/input/mouse/focaltech.c index 757f78a..23d2594 100644 --- a/drivers/input/mouse/focaltech.c +++ b/drivers/input/mouse/focaltech.c @@ -67,9 +67,6 @@ static void focaltech_reset(struct psmouse *psmouse) #define FOC_MAX_FINGERS 5 -#define FOC_MAX_X 2431 -#define FOC_MAX_Y 1663 - /* * Current state of a single finger on the touchpad. */ @@ -129,9 +126,17 @@ static void focaltech_report_state(struct psmouse *psmouse) input_mt_slot(dev, i); input_mt_report_slot_state(dev, MT_TOOL_FINGER, active); if (active) { - input_report_abs(dev, ABS_MT_POSITION_X, finger->x); + unsigned int clamped_x, clamped_y; + /* + * The touchpad might report invalid data, so we clamp + * the resulting values so that we do not confuse + * userspace. + */ + clamped_x = clamp(finger->x, 0U, priv->x_max); + clamped_y = clamp(finger->y, 0U, priv->y_max); + input_report_abs(dev, ABS_MT_POSITION_X, clamped_x); input_report_abs(dev, ABS_MT_POSITION_Y, - FOC_MAX_Y - finger->y); + priv->y_max - clamped_y); } } input_mt_report_pointer_emulation(dev, true); @@ -180,16 +185,6 @@ static void focaltech_process_abs_packet(struct psmouse *psmouse, state->pressed = (packet[0] >> 4) & 1; - /* - * packet[5] contains some kind of tool size in the most - * significant nibble. 0xff is a special value (latching) that - * signals a large contact area. - */ - if (packet[5] == 0xff) { - state->fingers[finger].valid = false; - return; - } - state->fingers[finger].x = ((packet[1] & 0xf) << 8) | packet[2]; state->fingers[finger].y = (packet[3] << 8) | packet[4]; state->fingers[finger].valid = true; @@ -381,6 +376,23 @@ static int focaltech_read_size(struct psmouse *psmouse) return 0; } + +void focaltech_set_resolution(struct psmouse *psmouse, unsigned int resolution) +{ + /* not supported yet */ +} + +static void focaltech_set_rate(struct psmouse *psmouse, unsigned int rate) +{ + /* not supported yet */ +} + +static void focaltech_set_scale(struct psmouse *psmouse, + enum psmouse_scale scale) +{ + /* not supported yet */ +} + int focaltech_init(struct psmouse *psmouse) { struct focaltech_data *priv; @@ -415,6 +427,14 @@ int focaltech_init(struct psmouse *psmouse) psmouse->cleanup = focaltech_reset; /* resync is not supported yet */ psmouse->resync_time = 0; + /* + * rate/resolution/scale changes are not supported yet, and + * the generic implementations of these functions seem to + * confuse some touchpads + */ + psmouse->set_resolution = focaltech_set_resolution; + psmouse->set_rate = focaltech_set_rate; + psmouse->set_scale = focaltech_set_scale; return 0; diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c index 23222dd..e5ed216 100644 --- a/drivers/input/mouse/lifebook.c +++ b/drivers/input/mouse/lifebook.c @@ -256,8 +256,8 @@ static void lifebook_disconnect(struct psmouse *psmouse) int lifebook_detect(struct psmouse *psmouse, bool set_properties) { - if (!lifebook_present) - return -1; + if (!lifebook_present) + return -1; if (desired_serio_phys && strcmp(psmouse->ps2dev.serio->phys, desired_serio_phys)) @@ -268,7 +268,7 @@ int lifebook_detect(struct psmouse *psmouse, bool set_properties) psmouse->name = "Lifebook TouchScreen"; } - return 0; + return 0; } static int lifebook_create_relative_device(struct psmouse *psmouse) diff --git a/drivers/input/mouse/psmouse-base.c b/drivers/input/mouse/psmouse-base.c index 4ccd01d..27057df 100644 --- a/drivers/input/mouse/psmouse-base.c +++ b/drivers/input/mouse/psmouse-base.c @@ -454,6 +454,17 @@ static void psmouse_set_rate(struct psmouse *psmouse, unsigned int rate) } /* + * Here we set the mouse scaling. + */ + +static void psmouse_set_scale(struct psmouse *psmouse, enum psmouse_scale scale) +{ + ps2_command(&psmouse->ps2dev, NULL, + scale == PSMOUSE_SCALE21 ? PSMOUSE_CMD_SETSCALE21 : + PSMOUSE_CMD_SETSCALE11); +} + +/* * psmouse_poll() - default poll handler. Everyone except for ALPS uses it. */ @@ -463,19 +474,45 @@ static int psmouse_poll(struct psmouse *psmouse) PSMOUSE_CMD_POLL | (psmouse->pktsize << 8)); } +static bool psmouse_check_pnp_id(const char *id, const char * const ids[]) +{ + int i; + + for (i = 0; ids[i]; i++) + if (!strcasecmp(id, ids[i])) + return true; + + return false; +} + /* * psmouse_matches_pnp_id - check if psmouse matches one of the passed in ids. */ bool psmouse_matches_pnp_id(struct psmouse *psmouse, const char * const ids[]) { - int i; - - if (!strncmp(psmouse->ps2dev.serio->firmware_id, "PNP:", 4)) - for (i = 0; ids[i]; i++) - if (strstr(psmouse->ps2dev.serio->firmware_id, ids[i])) - return true; + struct serio *serio = psmouse->ps2dev.serio; + char *p, *fw_id_copy, *save_ptr; + bool found = false; + + if (strncmp(serio->firmware_id, "PNP: ", 5)) + return false; + + fw_id_copy = kstrndup(&serio->firmware_id[5], + sizeof(serio->firmware_id) - 5, + GFP_KERNEL); + if (!fw_id_copy) + return false; + + save_ptr = fw_id_copy; + while ((p = strsep(&fw_id_copy, " ")) != NULL) { + if (psmouse_check_pnp_id(p, ids)) { + found = true; + break; + } + } - return false; + kfree(save_ptr); + return found; } /* @@ -689,6 +726,7 @@ static void psmouse_apply_defaults(struct psmouse *psmouse) psmouse->set_rate = psmouse_set_rate; psmouse->set_resolution = psmouse_set_resolution; + psmouse->set_scale = psmouse_set_scale; psmouse->poll = psmouse_poll; psmouse->protocol_handler = psmouse_process_byte; psmouse->pktsize = 3; @@ -1160,7 +1198,7 @@ static void psmouse_initialize(struct psmouse *psmouse) if (psmouse_max_proto != PSMOUSE_PS2) { psmouse->set_rate(psmouse, psmouse->rate); psmouse->set_resolution(psmouse, psmouse->resolution); - ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSCALE11); + psmouse->set_scale(psmouse, PSMOUSE_SCALE11); } } diff --git a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h index c2ff137..d02e1bd 100644 --- a/drivers/input/mouse/psmouse.h +++ b/drivers/input/mouse/psmouse.h @@ -36,6 +36,11 @@ typedef enum { PSMOUSE_FULL_PACKET } psmouse_ret_t; +enum psmouse_scale { + PSMOUSE_SCALE11, + PSMOUSE_SCALE21 +}; + struct psmouse { void *private; struct input_dev *dev; @@ -67,6 +72,7 @@ struct psmouse { psmouse_ret_t (*protocol_handler)(struct psmouse *psmouse); void (*set_rate)(struct psmouse *psmouse, unsigned int rate); void (*set_resolution)(struct psmouse *psmouse, unsigned int resolution); + void (*set_scale)(struct psmouse *psmouse, enum psmouse_scale scale); int (*reconnect)(struct psmouse *psmouse); void (*disconnect)(struct psmouse *psmouse); diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c index f2cceb6..630af73 100644 --- a/drivers/input/mouse/synaptics.c +++ b/drivers/input/mouse/synaptics.c @@ -123,32 +123,46 @@ void synaptics_reset(struct psmouse *psmouse) static bool cr48_profile_sensor; +#define ANY_BOARD_ID 0 struct min_max_quirk { const char * const *pnp_ids; + struct { + unsigned long int min, max; + } board_id; int x_min, x_max, y_min, y_max; }; static const struct min_max_quirk min_max_pnpid_table[] = { { (const char * const []){"LEN0033", NULL}, + {ANY_BOARD_ID, ANY_BOARD_ID}, 1024, 5052, 2258, 4832 }, { - (const char * const []){"LEN0035", "LEN0042", NULL}, + (const char * const []){"LEN0042", NULL}, + {ANY_BOARD_ID, ANY_BOARD_ID}, 1232, 5710, 1156, 4696 }, { (const char * const []){"LEN0034", "LEN0036", "LEN0037", "LEN0039", "LEN2002", "LEN2004", NULL}, + {ANY_BOARD_ID, 2961}, 1024, 5112, 2024, 4832 }, { (const char * const []){"LEN2001", NULL}, + {ANY_BOARD_ID, ANY_BOARD_ID}, 1024, 5022, 2508, 4832 }, { (const char * const []){"LEN2006", NULL}, + {2691, 2691}, + 1024, 5045, 2457, 4832 + }, + { + (const char * const []){"LEN2006", NULL}, + {ANY_BOARD_ID, ANY_BOARD_ID}, 1264, 5675, 1171, 4688 }, { } @@ -175,9 +189,7 @@ static const char * const topbuttonpad_pnp_ids[] = { "LEN0041", "LEN0042", /* Yoga */ "LEN0045", - "LEN0046", "LEN0047", - "LEN0048", "LEN0049", "LEN2000", "LEN2001", /* Edge E431 */ @@ -185,7 +197,7 @@ static const char * const topbuttonpad_pnp_ids[] = { "LEN2003", "LEN2004", /* L440 */ "LEN2005", - "LEN2006", + "LEN2006", /* Edge E440/E540 */ "LEN2007", "LEN2008", "LEN2009", @@ -194,6 +206,13 @@ static const char * const topbuttonpad_pnp_ids[] = { NULL }; +/* This list has been kindly provided by Synaptics. */ +static const char * const forcepad_pnp_ids[] = { + "SYN300D", + "SYN3014", + NULL +}; + /***************************************************************************** * Synaptics communications functions ****************************************************************************/ @@ -235,18 +254,39 @@ static int synaptics_model_id(struct psmouse *psmouse) return 0; } +static int synaptics_more_extended_queries(struct psmouse *psmouse) +{ + struct synaptics_data *priv = psmouse->private; + unsigned char buf[3]; + + if (synaptics_send_cmd(psmouse, SYN_QUE_MEXT_CAPAB_10, buf)) + return -1; + + priv->ext_cap_10 = (buf[0]<<16) | (buf[1]<<8) | buf[2]; + + return 0; +} + /* - * Read the board id from the touchpad + * Read the board id and the "More Extended Queries" from the touchpad * The board id is encoded in the "QUERY MODES" response */ -static int synaptics_board_id(struct psmouse *psmouse) +static int synaptics_query_modes(struct psmouse *psmouse) { struct synaptics_data *priv = psmouse->private; unsigned char bid[3]; + /* firmwares prior 7.5 have no board_id encoded */ + if (SYN_ID_FULL(priv->identity) < 0x705) + return 0; + if (synaptics_send_cmd(psmouse, SYN_QUE_MODES, bid)) return -1; priv->board_id = ((bid[0] & 0xfc) << 6) | bid[1]; + + if (SYN_MEXT_CAP_BIT(bid[0])) + return synaptics_more_extended_queries(psmouse); + return 0; } @@ -346,7 +386,6 @@ static int synaptics_resolution(struct psmouse *psmouse) { struct synaptics_data *priv = psmouse->private; unsigned char resp[3]; - int i; if (SYN_ID_MAJOR(priv->identity) < 4) return 0; @@ -358,17 +397,6 @@ static int synaptics_resolution(struct psmouse *psmouse) } } - for (i = 0; min_max_pnpid_table[i].pnp_ids; i++) { - if (psmouse_matches_pnp_id(psmouse, - min_max_pnpid_table[i].pnp_ids)) { - priv->x_min = min_max_pnpid_table[i].x_min; - priv->x_max = min_max_pnpid_table[i].x_max; - priv->y_min = min_max_pnpid_table[i].y_min; - priv->y_max = min_max_pnpid_table[i].y_max; - return 0; - } - } - if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 5 && SYN_CAP_MAX_DIMENSIONS(priv->ext_cap_0c)) { if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_MAX_COORDS, resp)) { @@ -377,23 +405,69 @@ static int synaptics_resolution(struct psmouse *psmouse) } else { priv->x_max = (resp[0] << 5) | ((resp[1] & 0x0f) << 1); priv->y_max = (resp[2] << 5) | ((resp[1] & 0xf0) >> 3); + psmouse_info(psmouse, + "queried max coordinates: x [..%d], y [..%d]\n", + priv->x_max, priv->y_max); } } - if (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 7 && - SYN_CAP_MIN_DIMENSIONS(priv->ext_cap_0c)) { + if (SYN_CAP_MIN_DIMENSIONS(priv->ext_cap_0c) && + (SYN_EXT_CAP_REQUESTS(priv->capabilities) >= 7 || + /* + * Firmware v8.1 does not report proper number of extended + * capabilities, but has been proven to report correct min + * coordinates. + */ + SYN_ID_FULL(priv->identity) == 0x801)) { if (synaptics_send_cmd(psmouse, SYN_QUE_EXT_MIN_COORDS, resp)) { psmouse_warn(psmouse, "device claims to have min coordinates query, but I'm not able to read it.\n"); } else { priv->x_min = (resp[0] << 5) | ((resp[1] & 0x0f) << 1); priv->y_min = (resp[2] << 5) | ((resp[1] & 0xf0) >> 3); + psmouse_info(psmouse, + "queried min coordinates: x [%d..], y [%d..]\n", + priv->x_min, priv->y_min); } } return 0; } +/* + * Apply quirk(s) if the hardware matches + */ + +static void synaptics_apply_quirks(struct psmouse *psmouse) +{ + struct synaptics_data *priv = psmouse->private; + int i; + + for (i = 0; min_max_pnpid_table[i].pnp_ids; i++) { + if (!psmouse_matches_pnp_id(psmouse, + min_max_pnpid_table[i].pnp_ids)) + continue; + + if (min_max_pnpid_table[i].board_id.min != ANY_BOARD_ID && + priv->board_id < min_max_pnpid_table[i].board_id.min) + continue; + + if (min_max_pnpid_table[i].board_id.max != ANY_BOARD_ID && + priv->board_id > min_max_pnpid_table[i].board_id.max) + continue; + + priv->x_min = min_max_pnpid_table[i].x_min; + priv->x_max = min_max_pnpid_table[i].x_max; + priv->y_min = min_max_pnpid_table[i].y_min; + priv->y_max = min_max_pnpid_table[i].y_max; + psmouse_info(psmouse, + "quirked min/max coordinates: x [%d..%d], y [%d..%d]\n", + priv->x_min, priv->x_max, + priv->y_min, priv->y_max); + break; + } +} + static int synaptics_query_hardware(struct psmouse *psmouse) { if (synaptics_identify(psmouse)) @@ -402,13 +476,15 @@ static int synaptics_query_hardware(struct psmouse *psmouse) return -1; if (synaptics_firmware_id(psmouse)) return -1; - if (synaptics_board_id(psmouse)) + if (synaptics_query_modes(psmouse)) return -1; if (synaptics_capability(psmouse)) return -1; if (synaptics_resolution(psmouse)) return -1; + synaptics_apply_quirks(psmouse); + return 0; } @@ -516,18 +592,22 @@ static int synaptics_is_pt_packet(unsigned char *buf) return (buf[0] & 0xFC) == 0x84 && (buf[3] & 0xCC) == 0xC4; } -static void synaptics_pass_pt_packet(struct serio *ptport, unsigned char *packet) +static void synaptics_pass_pt_packet(struct psmouse *psmouse, + struct serio *ptport, + unsigned char *packet) { + struct synaptics_data *priv = psmouse->private; struct psmouse *child = serio_get_drvdata(ptport); if (child && child->state == PSMOUSE_ACTIVATED) { - serio_interrupt(ptport, packet[1], 0); + serio_interrupt(ptport, packet[1] | priv->pt_buttons, 0); serio_interrupt(ptport, packet[4], 0); serio_interrupt(ptport, packet[5], 0); if (child->pktsize == 4) serio_interrupt(ptport, packet[2], 0); - } else + } else { serio_interrupt(ptport, packet[1], 0); + } } static void synaptics_pt_activate(struct psmouse *psmouse) @@ -605,7 +685,17 @@ static void synaptics_parse_agm(const unsigned char buf[], } } -static bool is_forcepad; +static void synaptics_parse_ext_buttons(const unsigned char buf[], + struct synaptics_data *priv, + struct synaptics_hw_state *hw) +{ + unsigned int ext_bits = + (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) + 1) >> 1; + unsigned int ext_mask = GENMASK(ext_bits - 1, 0); + + hw->ext_buttons = buf[4] & ext_mask; + hw->ext_buttons |= (buf[5] & ext_mask) << ext_bits; +} static int synaptics_parse_hw_state(const unsigned char buf[], struct synaptics_data *priv, @@ -636,7 +726,7 @@ static int synaptics_parse_hw_state(const unsigned char buf[], hw->left = (buf[0] & 0x01) ? 1 : 0; hw->right = (buf[0] & 0x02) ? 1 : 0; - if (is_forcepad) { + if (priv->is_forcepad) { /* * ForcePads, like Clickpads, use middle button * bits to report primary button clicks. @@ -691,28 +781,9 @@ static int synaptics_parse_hw_state(const unsigned char buf[], hw->down = ((buf[0] ^ buf[3]) & 0x02) ? 1 : 0; } - if (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) && + if (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) > 0 && ((buf[0] ^ buf[3]) & 0x02)) { - switch (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) & ~0x01) { - default: - /* - * if nExtBtn is greater than 8 it should be - * considered invalid and treated as 0 - */ - break; - case 8: - hw->ext_buttons |= ((buf[5] & 0x08)) ? 0x80 : 0; - hw->ext_buttons |= ((buf[4] & 0x08)) ? 0x40 : 0; - case 6: - hw->ext_buttons |= ((buf[5] & 0x04)) ? 0x20 : 0; - hw->ext_buttons |= ((buf[4] & 0x04)) ? 0x10 : 0; - case 4: - hw->ext_buttons |= ((buf[5] & 0x02)) ? 0x08 : 0; - hw->ext_buttons |= ((buf[4] & 0x02)) ? 0x04 : 0; - case 2: - hw->ext_buttons |= ((buf[5] & 0x01)) ? 0x02 : 0; - hw->ext_buttons |= ((buf[4] & 0x01)) ? 0x01 : 0; - } + synaptics_parse_ext_buttons(buf, priv, hw); } } else { hw->x = (((buf[1] & 0x1f) << 8) | buf[2]); @@ -774,12 +845,54 @@ static void synaptics_report_semi_mt_data(struct input_dev *dev, } } +static void synaptics_report_ext_buttons(struct psmouse *psmouse, + const struct synaptics_hw_state *hw) +{ + struct input_dev *dev = psmouse->dev; + struct synaptics_data *priv = psmouse->private; + int ext_bits = (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) + 1) >> 1; + char buf[6] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; + int i; + + if (!SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap)) + return; + + /* Bug in FW 8.1, buttons are reported only when ExtBit is 1 */ + if (SYN_ID_FULL(priv->identity) == 0x801 && + !((psmouse->packet[0] ^ psmouse->packet[3]) & 0x02)) + return; + + if (!SYN_CAP_EXT_BUTTONS_STICK(priv->ext_cap_10)) { + for (i = 0; i < ext_bits; i++) { + input_report_key(dev, BTN_0 + 2 * i, + hw->ext_buttons & (1 << i)); + input_report_key(dev, BTN_1 + 2 * i, + hw->ext_buttons & (1 << (i + ext_bits))); + } + return; + } + + /* + * This generation of touchpads has the trackstick buttons + * physically wired to the touchpad. Re-route them through + * the pass-through interface. + */ + if (!priv->pt_port) + return; + + /* The trackstick expects at most 3 buttons */ + priv->pt_buttons = SYN_CAP_EXT_BUTTON_STICK_L(hw->ext_buttons) | + SYN_CAP_EXT_BUTTON_STICK_R(hw->ext_buttons) << 1 | + SYN_CAP_EXT_BUTTON_STICK_M(hw->ext_buttons) << 2; + + synaptics_pass_pt_packet(psmouse, priv->pt_port, buf); +} + static void synaptics_report_buttons(struct psmouse *psmouse, const struct synaptics_hw_state *hw) { struct input_dev *dev = psmouse->dev; struct synaptics_data *priv = psmouse->private; - int i; input_report_key(dev, BTN_LEFT, hw->left); input_report_key(dev, BTN_RIGHT, hw->right); @@ -792,8 +905,7 @@ static void synaptics_report_buttons(struct psmouse *psmouse, input_report_key(dev, BTN_BACK, hw->down); } - for (i = 0; i < SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap); i++) - input_report_key(dev, BTN_0 + i, hw->ext_buttons & (1 << i)); + synaptics_report_ext_buttons(psmouse, hw); } static void synaptics_report_mt_data(struct psmouse *psmouse, @@ -1014,7 +1126,8 @@ static psmouse_ret_t synaptics_process_byte(struct psmouse *psmouse) if (SYN_CAP_PASS_THROUGH(priv->capabilities) && synaptics_is_pt_packet(psmouse->packet)) { if (priv->pt_port) - synaptics_pass_pt_packet(priv->pt_port, psmouse->packet); + synaptics_pass_pt_packet(psmouse, priv->pt_port, + psmouse->packet); } else synaptics_process_packet(psmouse); @@ -1081,7 +1194,7 @@ static void set_input_params(struct psmouse *psmouse, ABS_MT_POSITION_Y); /* Image sensors can report per-contact pressure */ input_set_abs_params(dev, ABS_MT_PRESSURE, 0, 255, 0, 0); - input_mt_init_slots(dev, 2, INPUT_MT_POINTER | INPUT_MT_TRACK); + input_mt_init_slots(dev, 3, INPUT_MT_POINTER | INPUT_MT_TRACK); /* Image sensors can signal 4 and 5 finger clicks */ __set_bit(BTN_TOOL_QUADTAP, dev->keybit); @@ -1116,8 +1229,9 @@ static void set_input_params(struct psmouse *psmouse, __set_bit(BTN_BACK, dev->keybit); } - for (i = 0; i < SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap); i++) - __set_bit(BTN_0 + i, dev->keybit); + if (!SYN_CAP_EXT_BUTTONS_STICK(priv->ext_cap_10)) + for (i = 0; i < SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap); i++) + __set_bit(BTN_0 + i, dev->keybit); __clear_bit(EV_REL, dev->evbit); __clear_bit(REL_X, dev->relbit); @@ -1125,7 +1239,8 @@ static void set_input_params(struct psmouse *psmouse, if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) { __set_bit(INPUT_PROP_BUTTONPAD, dev->propbit); - if (psmouse_matches_pnp_id(psmouse, topbuttonpad_pnp_ids)) + if (psmouse_matches_pnp_id(psmouse, topbuttonpad_pnp_ids) && + !SYN_CAP_EXT_BUTTONS_STICK(priv->ext_cap_10)) __set_bit(INPUT_PROP_TOPBUTTONPAD, dev->propbit); /* Clickpads report only left button */ __clear_bit(BTN_RIGHT, dev->keybit); @@ -1311,29 +1426,11 @@ static const struct dmi_system_id __initconst cr48_dmi_table[] = { { } }; -static const struct dmi_system_id forcepad_dmi_table[] __initconst = { -#if defined(CONFIG_DMI) && defined(CONFIG_X86) - { - .matches = { - DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), - DMI_MATCH(DMI_PRODUCT_NAME, "HP EliteBook Folio 1040 G1"), - }, - }, -#endif - { } -}; - void __init synaptics_module_init(void) { impaired_toshiba_kbc = dmi_check_system(toshiba_dmi_table); broken_olpc_ec = dmi_check_system(olpc_dmi_table); cr48_profile_sensor = dmi_check_system(cr48_dmi_table); - - /* - * Unfortunately ForcePad capability is not exported over PS/2, - * so we have to resort to checking DMI. - */ - is_forcepad = dmi_check_system(forcepad_dmi_table); } static int __synaptics_init(struct psmouse *psmouse, bool absolute_mode) @@ -1368,6 +1465,12 @@ static int __synaptics_init(struct psmouse *psmouse, bool absolute_mode) if (SYN_ID_DISGEST_SUPPORTED(priv->identity)) priv->disable_gesture = true; + /* + * Unfortunately ForcePad capability is not exported over PS/2, + * so we have to resort to checking PNP IDs. + */ + priv->is_forcepad = psmouse_matches_pnp_id(psmouse, forcepad_pnp_ids); + if (synaptics_set_mode(psmouse)) { psmouse_err(psmouse, "Unable to initialize device.\n"); goto init_fail; diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h index aedc329..56faa7e 100644 --- a/drivers/input/mouse/synaptics.h +++ b/drivers/input/mouse/synaptics.h @@ -22,6 +22,7 @@ #define SYN_QUE_EXT_CAPAB_0C 0x0c #define SYN_QUE_EXT_MAX_COORDS 0x0d #define SYN_QUE_EXT_MIN_COORDS 0x0f +#define SYN_QUE_MEXT_CAPAB_10 0x10 /* synatics modes */ #define SYN_BIT_ABSOLUTE_MODE (1 << 7) @@ -53,6 +54,7 @@ #define SYN_EXT_CAP_REQUESTS(c) (((c) & 0x700000) >> 20) #define SYN_CAP_MULTI_BUTTON_NO(ec) (((ec) & 0x00f000) >> 12) #define SYN_CAP_PRODUCT_ID(ec) (((ec) & 0xff0000) >> 16) +#define SYN_MEXT_CAP_BIT(m) ((m) & (1 << 1)) /* * The following describes response for the 0x0c query. @@ -89,6 +91,30 @@ #define SYN_CAP_REDUCED_FILTERING(ex0c) ((ex0c) & 0x000400) #define SYN_CAP_IMAGE_SENSOR(ex0c) ((ex0c) & 0x000800) +/* + * The following descibes response for the 0x10 query. + * + * byte mask name meaning + * ---- ---- ------- ------------ + * 1 0x01 ext buttons are stick buttons exported in the extended + * capability are actually meant to be used + * by the tracktick (pass-through). + * 1 0x02 SecurePad the touchpad is a SecurePad, so it + * contains a built-in fingerprint reader. + * 1 0xe0 more ext count how many more extented queries are + * available after this one. + * 2 0xff SecurePad width the width of the SecurePad fingerprint + * reader. + * 3 0xff SecurePad height the height of the SecurePad fingerprint + * reader. + */ +#define SYN_CAP_EXT_BUTTONS_STICK(ex10) ((ex10) & 0x010000) +#define SYN_CAP_SECUREPAD(ex10) ((ex10) & 0x020000) + +#define SYN_CAP_EXT_BUTTON_STICK_L(eb) (!!((eb) & 0x01)) +#define SYN_CAP_EXT_BUTTON_STICK_M(eb) (!!((eb) & 0x02)) +#define SYN_CAP_EXT_BUTTON_STICK_R(eb) (!!((eb) & 0x04)) + /* synaptics modes query bits */ #define SYN_MODE_ABSOLUTE(m) ((m) & (1 << 7)) #define SYN_MODE_RATE(m) ((m) & (1 << 6)) @@ -143,6 +169,7 @@ struct synaptics_data { unsigned long int capabilities; /* Capabilities */ unsigned long int ext_cap; /* Extended Capabilities */ unsigned long int ext_cap_0c; /* Ext Caps from 0x0c query */ + unsigned long int ext_cap_10; /* Ext Caps from 0x10 query */ unsigned long int identity; /* Identification */ unsigned int x_res, y_res; /* X/Y resolution in units/mm */ unsigned int x_max, y_max; /* Max coordinates (from FW) */ @@ -156,6 +183,7 @@ struct synaptics_data { bool disable_gesture; /* disable gestures */ struct serio *pt_port; /* Pass-through serio port */ + unsigned char pt_buttons; /* Pass-through buttons */ /* * Last received Advanced Gesture Mode (AGM) packet. An AGM packet @@ -168,6 +196,7 @@ struct synaptics_data { unsigned long press_start; bool press; bool report_press; + bool is_forcepad; }; void synaptics_module_init(void); diff --git a/drivers/input/serio/gscps2.c b/drivers/input/serio/gscps2.c index 94ab494..ecba666 100644 --- a/drivers/input/serio/gscps2.c +++ b/drivers/input/serio/gscps2.c @@ -31,7 +31,6 @@ #include <linux/spinlock.h> #include <linux/delay.h> #include <linux/ioport.h> -#include <linux/pci_ids.h> #include <asm/irq.h> #include <asm/io.h> diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index 986a71c..cb5ece7 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -1162,13 +1162,32 @@ static int i8042_controller_resume(bool force_reset) static int i8042_pm_suspend(struct device *dev) { + int i; + i8042_controller_reset(true); + /* Set up serio interrupts for system wakeup. */ + for (i = 0; i < I8042_NUM_PORTS; i++) { + struct serio *serio = i8042_ports[i].serio; + + if (serio && device_may_wakeup(&serio->dev)) + enable_irq_wake(i8042_ports[i].irq); + } + return 0; } static int i8042_pm_resume(struct device *dev) { + int i; + + for (i = 0; i < I8042_NUM_PORTS; i++) { + struct serio *serio = i8042_ports[i].serio; + + if (serio && device_may_wakeup(&serio->dev)) + disable_irq_wake(i8042_ports[i].irq); + } + /* * On resume from S2R we always try to reset the controller * to bring it in a sane state. (In case of S2D we expect @@ -1300,13 +1319,16 @@ static void __init i8042_register_ports(void) int i; for (i = 0; i < I8042_NUM_PORTS; i++) { - if (i8042_ports[i].serio) { + struct serio *serio = i8042_ports[i].serio; + + if (serio) { printk(KERN_INFO "serio: %s at %#lx,%#lx irq %d\n", - i8042_ports[i].serio->name, + serio->name, (unsigned long) I8042_DATA_REG, (unsigned long) I8042_COMMAND_REG, i8042_ports[i].irq); - serio_register_port(i8042_ports[i].serio); + serio_register_port(serio); + device_set_wakeup_capable(&serio->dev, true); } } } diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index f8d16f1..80f6386 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -140,6 +140,19 @@ config TOUCHSCREEN_BU21013 To compile this driver as a module, choose M here: the module will be called bu21013_ts. +config TOUCHSCREEN_CHIPONE_ICN8318 + tristate "chipone icn8318 touchscreen controller" + depends on GPIOLIB + depends on I2C + depends on OF + help + Say Y here if you have a ChipOne icn8318 based I2C touchscreen. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called chipone_icn8318. + config TOUCHSCREEN_CY8CTMG110 tristate "cy8ctmg110 touchscreen" depends on I2C @@ -297,11 +310,12 @@ config TOUCHSCREEN_FUJITSU config TOUCHSCREEN_GOODIX tristate "Goodix I2C touchscreen" - depends on I2C && ACPI + depends on I2C help Say Y here if you have the Goodix touchscreen (such as one installed in Onda v975w tablets) connected to your - system. + system. It also supports 5-finger chip models, which can be + found on ARM tablets, like Wexler TAB7200 and MSI Primo73. If unsure, say N. @@ -323,6 +337,18 @@ config TOUCHSCREEN_ILI210X To compile this driver as a module, choose M here: the module will be called ili210x. +config TOUCHSCREEN_IPROC + tristate "IPROC touch panel driver support" + depends on ARCH_BCM_IPROC || COMPILE_TEST + help + Say Y here if you want to add support for the IPROC touch + controller to your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called bcm_iproc_tsc. + config TOUCHSCREEN_S3C2410 tristate "Samsung S3C2410/generic touchscreen input driver" depends on ARCH_S3C24XX || SAMSUNG_DEV_TS @@ -943,6 +969,7 @@ config TOUCHSCREEN_SUN4I tristate "Allwinner sun4i resistive touchscreen controller support" depends on ARCH_SUNXI || COMPILE_TEST depends on HWMON + depends on THERMAL || !THERMAL_OF help This selects support for the resistive touchscreen controller found on Allwinner sunxi SoCs. @@ -963,6 +990,17 @@ config TOUCHSCREEN_SUR40 To compile this driver as a module, choose M here: the module will be called sur40. +config TOUCHSCREEN_SX8654 + tristate "Semtech SX8654 touchscreen" + depends on I2C + help + Say Y here if you have a Semtech SX8654 touchscreen controller. + + If unsure, say N + + To compile this driver as a module, choose M here: the + module will be called sx8654. + config TOUCHSCREEN_TPS6507X tristate "TPS6507x based touchscreens" depends on I2C diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 0242fea..44deea7 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_TOUCHSCREEN_AR1021_I2C) += ar1021_i2c.o obj-$(CONFIG_TOUCHSCREEN_ATMEL_MXT) += atmel_mxt_ts.o obj-$(CONFIG_TOUCHSCREEN_AUO_PIXCIR) += auo-pixcir-ts.o obj-$(CONFIG_TOUCHSCREEN_BU21013) += bu21013_ts.o +obj-$(CONFIG_TOUCHSCREEN_CHIPONE_ICN8318) += chipone_icn8318.o obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110) += cy8ctmg110_ts.o obj-$(CONFIG_TOUCHSCREEN_CYTTSP_CORE) += cyttsp_core.o obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C) += cyttsp_i2c.o cyttsp_i2c_common.o @@ -39,6 +40,7 @@ obj-$(CONFIG_TOUCHSCREEN_GOODIX) += goodix.o obj-$(CONFIG_TOUCHSCREEN_ILI210X) += ili210x.o obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o obj-$(CONFIG_TOUCHSCREEN_INTEL_MID) += intel-mid-touch.o +obj-$(CONFIG_TOUCHSCREEN_IPROC) += bcm_iproc_tsc.o obj-$(CONFIG_TOUCHSCREEN_LPC32XX) += lpc32xx_ts.o obj-$(CONFIG_TOUCHSCREEN_MAX11801) += max11801_ts.o obj-$(CONFIG_TOUCHSCREEN_MC13783) += mc13783_ts.o @@ -79,5 +81,6 @@ obj-$(CONFIG_TOUCHSCREEN_WM97XX_ATMEL) += atmel-wm97xx.o obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE) += mainstone-wm97xx.o obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE) += zylonite-wm97xx.o obj-$(CONFIG_TOUCHSCREEN_W90X900) += w90p910_ts.o +obj-$(CONFIG_TOUCHSCREEN_SX8654) += sx8654.o obj-$(CONFIG_TOUCHSCREEN_TPS6507X) += tps6507x-ts.o obj-$(CONFIG_TOUCHSCREEN_ZFORCE) += zforce_ts.o diff --git a/drivers/input/touchscreen/ar1021_i2c.c b/drivers/input/touchscreen/ar1021_i2c.c index ba30578..f0b954d 100644 --- a/drivers/input/touchscreen/ar1021_i2c.c +++ b/drivers/input/touchscreen/ar1021_i2c.c @@ -157,7 +157,7 @@ static const struct i2c_device_id ar1021_i2c_id[] = { }; MODULE_DEVICE_TABLE(i2c, ar1021_i2c_id); -static struct of_device_id ar1021_i2c_of_match[] = { +static const struct of_device_id ar1021_i2c_of_match[] = { { .compatible = "microchip,ar1021-i2c", }, { } }; diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index 95ee92a..2875ddf 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -25,6 +25,7 @@ #include <linux/interrupt.h> #include <linux/of.h> #include <linux/slab.h> +#include <asm/unaligned.h> /* Version */ #define MXT_VER_20 20 @@ -79,6 +80,7 @@ #define MXT_SPT_DIGITIZER_T43 43 #define MXT_SPT_MESSAGECOUNT_T44 44 #define MXT_SPT_CTECONFIG_T46 46 +#define MXT_TOUCH_MULTITOUCHSCREEN_T100 100 /* MXT_GEN_MESSAGE_T5 object */ #define MXT_RPTID_NOMSG 0xff @@ -185,6 +187,36 @@ struct t9_range { #define MXT_RESET_VALUE 0x01 #define MXT_BACKUP_VALUE 0x55 +/* T100 Multiple Touch Touchscreen */ +#define MXT_T100_CTRL 0 +#define MXT_T100_CFG1 1 +#define MXT_T100_TCHAUX 3 +#define MXT_T100_XRANGE 13 +#define MXT_T100_YRANGE 24 + +#define MXT_T100_CFG_SWITCHXY BIT(5) + +#define MXT_T100_TCHAUX_VECT BIT(0) +#define MXT_T100_TCHAUX_AMPL BIT(1) +#define MXT_T100_TCHAUX_AREA BIT(2) + +#define MXT_T100_DETECT BIT(7) +#define MXT_T100_TYPE_MASK 0x70 + +enum t100_type { + MXT_T100_TYPE_FINGER = 1, + MXT_T100_TYPE_PASSIVE_STYLUS = 2, + MXT_T100_TYPE_HOVERING_FINGER = 4, + MXT_T100_TYPE_GLOVE = 5, + MXT_T100_TYPE_LARGE_TOUCH = 6, +}; + +#define MXT_DISTANCE_ACTIVE_TOUCH 0 +#define MXT_DISTANCE_HOVERING 1 + +#define MXT_TOUCH_MAJOR_DEFAULT 1 +#define MXT_PRESSURE_DEFAULT 1 + /* Delay times */ #define MXT_BACKUP_TIME 50 /* msec */ #define MXT_RESET_TIME 200 /* msec */ @@ -244,6 +276,9 @@ struct mxt_data { unsigned int max_y; bool in_bootloader; u16 mem_size; + u8 t100_aux_ampl; + u8 t100_aux_area; + u8 t100_aux_vect; u8 max_reportid; u32 config_crc; u32 info_crc; @@ -253,6 +288,7 @@ struct mxt_data { bool update_input; u8 last_message_count; u8 num_touchids; + u8 multitouch; /* Cached parameters from object table */ u16 T5_address; @@ -264,6 +300,8 @@ struct mxt_data { u8 T9_reportid_max; u8 T19_reportid; u16 T44_address; + u8 T100_reportid_min; + u8 T100_reportid_max; /* for fw update in bootloader */ struct completion bl_completion; @@ -771,6 +809,114 @@ static void mxt_proc_t9_message(struct mxt_data *data, u8 *message) data->update_input = true; } +static void mxt_proc_t100_message(struct mxt_data *data, u8 *message) +{ + struct device *dev = &data->client->dev; + struct input_dev *input_dev = data->input_dev; + int id; + u8 status; + u8 type = 0; + u16 x; + u16 y; + int distance = 0; + int tool = 0; + u8 major = 0; + u8 pressure = 0; + u8 orientation = 0; + + id = message[0] - data->T100_reportid_min - 2; + + /* ignore SCRSTATUS events */ + if (id < 0) + return; + + status = message[1]; + x = get_unaligned_le16(&message[2]); + y = get_unaligned_le16(&message[4]); + + if (status & MXT_T100_DETECT) { + type = (status & MXT_T100_TYPE_MASK) >> 4; + + switch (type) { + case MXT_T100_TYPE_HOVERING_FINGER: + tool = MT_TOOL_FINGER; + distance = MXT_DISTANCE_HOVERING; + + if (data->t100_aux_vect) + orientation = message[data->t100_aux_vect]; + + break; + + case MXT_T100_TYPE_FINGER: + case MXT_T100_TYPE_GLOVE: + tool = MT_TOOL_FINGER; + distance = MXT_DISTANCE_ACTIVE_TOUCH; + + if (data->t100_aux_area) + major = message[data->t100_aux_area]; + + if (data->t100_aux_ampl) + pressure = message[data->t100_aux_ampl]; + + if (data->t100_aux_vect) + orientation = message[data->t100_aux_vect]; + + break; + + case MXT_T100_TYPE_PASSIVE_STYLUS: + tool = MT_TOOL_PEN; + + /* + * Passive stylus is reported with size zero so + * hardcode. + */ + major = MXT_TOUCH_MAJOR_DEFAULT; + + if (data->t100_aux_ampl) + pressure = message[data->t100_aux_ampl]; + + break; + + case MXT_T100_TYPE_LARGE_TOUCH: + /* Ignore suppressed touch */ + break; + + default: + dev_dbg(dev, "Unexpected T100 type\n"); + return; + } + } + + /* + * Values reported should be non-zero if tool is touching the + * device + */ + if (!pressure && type != MXT_T100_TYPE_HOVERING_FINGER) + pressure = MXT_PRESSURE_DEFAULT; + + input_mt_slot(input_dev, id); + + if (status & MXT_T100_DETECT) { + dev_dbg(dev, "[%u] type:%u x:%u y:%u a:%02X p:%02X v:%02X\n", + id, type, x, y, major, pressure, orientation); + + input_mt_report_slot_state(input_dev, tool, 1); + input_report_abs(input_dev, ABS_MT_POSITION_X, x); + input_report_abs(input_dev, ABS_MT_POSITION_Y, y); + input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, major); + input_report_abs(input_dev, ABS_MT_PRESSURE, pressure); + input_report_abs(input_dev, ABS_MT_DISTANCE, distance); + input_report_abs(input_dev, ABS_MT_ORIENTATION, orientation); + } else { + dev_dbg(dev, "[%u] release\n", id); + + /* close out slot */ + input_mt_report_slot_state(input_dev, 0, 0); + } + + data->update_input = true; +} + static int mxt_proc_message(struct mxt_data *data, u8 *message) { u8 report_id = message[0]; @@ -786,9 +932,12 @@ static int mxt_proc_message(struct mxt_data *data, u8 *message) * is not yet registered. */ mxt_dump_message(data, message); - } else if (report_id >= data->T9_reportid_min - && report_id <= data->T9_reportid_max) { + } else if (report_id >= data->T9_reportid_min && + report_id <= data->T9_reportid_max) { mxt_proc_t9_message(data, message); + } else if (report_id >= data->T100_reportid_min && + report_id <= data->T100_reportid_max) { + mxt_proc_t100_message(data, message); } else if (report_id == data->T19_reportid) { mxt_input_button(data, message); data->update_input = true; @@ -1411,6 +1560,8 @@ static void mxt_free_object_table(struct mxt_data *data) data->T9_reportid_max = 0; data->T19_reportid = 0; data->T44_address = 0; + data->T100_reportid_min = 0; + data->T100_reportid_max = 0; data->max_reportid = 0; } @@ -1487,6 +1638,7 @@ static int mxt_get_object_table(struct mxt_data *data) data->T7_address = object->start_address; break; case MXT_TOUCH_MULTI_T9: + data->multitouch = MXT_TOUCH_MULTI_T9; data->T9_reportid_min = min_id; data->T9_reportid_max = max_id; data->num_touchids = object->num_report_ids @@ -1498,6 +1650,13 @@ static int mxt_get_object_table(struct mxt_data *data) case MXT_SPT_GPIOPWM_T19: data->T19_reportid = min_id; break; + case MXT_TOUCH_MULTITOUCHSCREEN_T100: + data->multitouch = MXT_TOUCH_MULTITOUCHSCREEN_T100; + data->T100_reportid_min = min_id; + data->T100_reportid_max = max_id; + /* first two report IDs reserved */ + data->num_touchids = object->num_report_ids - 2; + break; } end_address = object->start_address @@ -1582,22 +1741,138 @@ static int mxt_read_t9_resolution(struct mxt_data *data) return 0; } +static int mxt_read_t100_config(struct mxt_data *data) +{ + struct i2c_client *client = data->client; + int error; + struct mxt_object *object; + u16 range_x, range_y; + u8 cfg, tchaux; + u8 aux; + + object = mxt_get_object(data, MXT_TOUCH_MULTITOUCHSCREEN_T100); + if (!object) + return -EINVAL; + + error = __mxt_read_reg(client, + object->start_address + MXT_T100_XRANGE, + sizeof(range_x), &range_x); + if (error) + return error; + + le16_to_cpus(&range_x); + + error = __mxt_read_reg(client, + object->start_address + MXT_T100_YRANGE, + sizeof(range_y), &range_y); + if (error) + return error; + + le16_to_cpus(&range_y); + + error = __mxt_read_reg(client, + object->start_address + MXT_T100_CFG1, + 1, &cfg); + if (error) + return error; + + error = __mxt_read_reg(client, + object->start_address + MXT_T100_TCHAUX, + 1, &tchaux); + if (error) + return error; + + /* Handle default values */ + if (range_x == 0) + range_x = 1023; + + if (range_y == 0) + range_y = 1023; + + if (cfg & MXT_T100_CFG_SWITCHXY) { + data->max_x = range_y; + data->max_y = range_x; + } else { + data->max_x = range_x; + data->max_y = range_y; + } + + /* allocate aux bytes */ + aux = 6; + + if (tchaux & MXT_T100_TCHAUX_VECT) + data->t100_aux_vect = aux++; + + if (tchaux & MXT_T100_TCHAUX_AMPL) + data->t100_aux_ampl = aux++; + + if (tchaux & MXT_T100_TCHAUX_AREA) + data->t100_aux_area = aux++; + + dev_dbg(&client->dev, + "T100 aux mappings vect:%u ampl:%u area:%u\n", + data->t100_aux_vect, data->t100_aux_ampl, data->t100_aux_area); + + dev_info(&client->dev, + "T100 Touchscreen size X%uY%u\n", data->max_x, data->max_y); + + return 0; +} + static int mxt_input_open(struct input_dev *dev); static void mxt_input_close(struct input_dev *dev); -static int mxt_initialize_t9_input_device(struct mxt_data *data) +static void mxt_set_up_as_touchpad(struct input_dev *input_dev, + struct mxt_data *data) { - struct device *dev = &data->client->dev; const struct mxt_platform_data *pdata = data->pdata; + int i; + + input_dev->name = "Atmel maXTouch Touchpad"; + + __set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit); + + input_abs_set_res(input_dev, ABS_X, MXT_PIXELS_PER_MM); + input_abs_set_res(input_dev, ABS_Y, MXT_PIXELS_PER_MM); + input_abs_set_res(input_dev, ABS_MT_POSITION_X, + MXT_PIXELS_PER_MM); + input_abs_set_res(input_dev, ABS_MT_POSITION_Y, + MXT_PIXELS_PER_MM); + + for (i = 0; i < pdata->t19_num_keys; i++) + if (pdata->t19_keymap[i] != KEY_RESERVED) + input_set_capability(input_dev, EV_KEY, + pdata->t19_keymap[i]); +} + +static int mxt_initialize_input_device(struct mxt_data *data) +{ + const struct mxt_platform_data *pdata = data->pdata; + struct device *dev = &data->client->dev; struct input_dev *input_dev; int error; unsigned int num_mt_slots; unsigned int mt_flags = 0; - int i; - error = mxt_read_t9_resolution(data); - if (error) - dev_warn(dev, "Failed to initialize T9 resolution\n"); + switch (data->multitouch) { + case MXT_TOUCH_MULTI_T9: + num_mt_slots = data->T9_reportid_max - data->T9_reportid_min + 1; + error = mxt_read_t9_resolution(data); + if (error) + dev_warn(dev, "Failed to initialize T9 resolution\n"); + break; + + case MXT_TOUCH_MULTITOUCHSCREEN_T100: + num_mt_slots = data->num_touchids; + error = mxt_read_t100_config(data); + if (error) + dev_warn(dev, "Failed to read T100 config\n"); + break; + + default: + dev_err(dev, "Invalid multitouch object\n"); + return -EINVAL; + } input_dev = input_allocate_device(); if (!input_dev) { @@ -1612,54 +1887,76 @@ static int mxt_initialize_t9_input_device(struct mxt_data *data) input_dev->open = mxt_input_open; input_dev->close = mxt_input_close; - __set_bit(EV_ABS, input_dev->evbit); - __set_bit(EV_KEY, input_dev->evbit); - __set_bit(BTN_TOUCH, input_dev->keybit); + input_set_capability(input_dev, EV_KEY, BTN_TOUCH); - if (pdata->t19_num_keys) { - __set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit); + /* For single touch */ + input_set_abs_params(input_dev, ABS_X, 0, data->max_x, 0, 0); + input_set_abs_params(input_dev, ABS_Y, 0, data->max_y, 0, 0); - for (i = 0; i < pdata->t19_num_keys; i++) - if (pdata->t19_keymap[i] != KEY_RESERVED) - input_set_capability(input_dev, EV_KEY, - pdata->t19_keymap[i]); + if (data->multitouch == MXT_TOUCH_MULTI_T9 || + (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 && + data->t100_aux_ampl)) { + input_set_abs_params(input_dev, ABS_PRESSURE, 0, 255, 0, 0); + } + /* If device has buttons we assume it is a touchpad */ + if (pdata->t19_num_keys) { + mxt_set_up_as_touchpad(input_dev, data); mt_flags |= INPUT_MT_POINTER; - - input_abs_set_res(input_dev, ABS_X, MXT_PIXELS_PER_MM); - input_abs_set_res(input_dev, ABS_Y, MXT_PIXELS_PER_MM); - input_abs_set_res(input_dev, ABS_MT_POSITION_X, - MXT_PIXELS_PER_MM); - input_abs_set_res(input_dev, ABS_MT_POSITION_Y, - MXT_PIXELS_PER_MM); - - input_dev->name = "Atmel maXTouch Touchpad"; } - /* For single touch */ - input_set_abs_params(input_dev, ABS_X, - 0, data->max_x, 0, 0); - input_set_abs_params(input_dev, ABS_Y, - 0, data->max_y, 0, 0); - input_set_abs_params(input_dev, ABS_PRESSURE, - 0, 255, 0, 0); - /* For multi touch */ - num_mt_slots = data->T9_reportid_max - data->T9_reportid_min + 1; error = input_mt_init_slots(input_dev, num_mt_slots, mt_flags); if (error) { dev_err(dev, "Error %d initialising slots\n", error); goto err_free_mem; } - input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, - 0, MXT_MAX_AREA, 0, 0); + if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100) { + input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE, + 0, MT_TOOL_MAX, 0, 0); + input_set_abs_params(input_dev, ABS_MT_DISTANCE, + MXT_DISTANCE_ACTIVE_TOUCH, + MXT_DISTANCE_HOVERING, + 0, 0); + } + input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0, data->max_x, 0, 0); input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0, data->max_y, 0, 0); - input_set_abs_params(input_dev, ABS_MT_PRESSURE, - 0, 255, 0, 0); + + if (data->multitouch == MXT_TOUCH_MULTI_T9 || + (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 && + data->t100_aux_area)) { + input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, + 0, MXT_MAX_AREA, 0, 0); + } + + if (data->multitouch == MXT_TOUCH_MULTI_T9 || + (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 && + data->t100_aux_ampl)) { + input_set_abs_params(input_dev, ABS_MT_PRESSURE, + 0, 255, 0, 0); + } + + if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 && + data->t100_aux_vect) { + input_set_abs_params(input_dev, ABS_MT_ORIENTATION, + 0, 255, 0, 0); + } + + if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 && + data->t100_aux_ampl) { + input_set_abs_params(input_dev, ABS_MT_PRESSURE, + 0, 255, 0, 0); + } + + if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 && + data->t100_aux_vect) { + input_set_abs_params(input_dev, ABS_MT_ORIENTATION, + 0, 255, 0, 0); + } input_set_drvdata(input_dev, data); @@ -1765,9 +2062,13 @@ static int mxt_configure_objects(struct mxt_data *data, dev_warn(dev, "Error %d updating config\n", error); } - error = mxt_initialize_t9_input_device(data); - if (error) - return error; + if (data->multitouch) { + error = mxt_initialize_input_device(data); + if (error) + return error; + } else { + dev_warn(dev, "No touch object detected\n"); + } dev_info(dev, "Family: %u Variant: %u Firmware V%u.%u.%02X Objects: %u\n", @@ -2044,15 +2345,13 @@ static const struct attribute_group mxt_attr_group = { static void mxt_start(struct mxt_data *data) { /* Touch enable */ - mxt_write_object(data, - MXT_TOUCH_MULTI_T9, MXT_TOUCH_CTRL, 0x83); + mxt_write_object(data, data->multitouch, MXT_TOUCH_CTRL, 0x83); } static void mxt_stop(struct mxt_data *data) { /* Touch disable */ - mxt_write_object(data, - MXT_TOUCH_MULTI_T9, MXT_TOUCH_CTRL, 0); + mxt_write_object(data, data->multitouch, MXT_TOUCH_CTRL, 0); } static int mxt_input_open(struct input_dev *dev) diff --git a/drivers/input/touchscreen/bcm_iproc_tsc.c b/drivers/input/touchscreen/bcm_iproc_tsc.c new file mode 100644 index 0000000..ae460a5c --- /dev/null +++ b/drivers/input/touchscreen/bcm_iproc_tsc.c @@ -0,0 +1,522 @@ +/* +* Copyright (C) 2015 Broadcom Corporation +* +* This program is free software; you can redistribute it and/or +* modify it under the terms of the GNU General Public License as +* published by the Free Software Foundation version 2. +* +* This program is distributed "as is" WITHOUT ANY WARRANTY of any +* kind, whether express or implied; without even the implied warranty +* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +*/ +#include <linux/module.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/delay.h> +#include <linux/interrupt.h> +#include <linux/keyboard.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/of.h> +#include <asm/irq.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/serio.h> + +#define IPROC_TS_NAME "iproc-ts" + +#define PEN_DOWN_STATUS 1 +#define PEN_UP_STATUS 0 + +#define X_MIN 0 +#define Y_MIN 0 +#define X_MAX 0xFFF +#define Y_MAX 0xFFF + +/* Value given by controller for invalid coordinate. */ +#define INVALID_COORD 0xFFFFFFFF + +/* Register offsets */ +#define REGCTL1 0x00 +#define REGCTL2 0x04 +#define INTERRUPT_THRES 0x08 +#define INTERRUPT_MASK 0x0c + +#define INTERRUPT_STATUS 0x10 +#define CONTROLLER_STATUS 0x14 +#define FIFO_DATA 0x18 +#define FIFO_DATA_X_Y_MASK 0xFFFF +#define ANALOG_CONTROL 0x1c + +#define AUX_DATA 0x20 +#define DEBOUNCE_CNTR_STAT 0x24 +#define SCAN_CNTR_STAT 0x28 +#define REM_CNTR_STAT 0x2c + +#define SETTLING_TIMER_STAT 0x30 +#define SPARE_REG 0x34 +#define SOFT_BYPASS_CONTROL 0x38 +#define SOFT_BYPASS_DATA 0x3c + + +/* Bit values for INTERRUPT_MASK and INTERRUPT_STATUS regs */ +#define TS_PEN_INTR_MASK BIT(0) +#define TS_FIFO_INTR_MASK BIT(2) + +/* Bit values for CONTROLLER_STATUS reg1 */ +#define TS_PEN_DOWN BIT(0) + +/* Shift values for control reg1 */ +#define SCANNING_PERIOD_SHIFT 24 +#define DEBOUNCE_TIMEOUT_SHIFT 16 +#define SETTLING_TIMEOUT_SHIFT 8 +#define TOUCH_TIMEOUT_SHIFT 0 + +/* Shift values for coordinates from fifo */ +#define X_COORD_SHIFT 0 +#define Y_COORD_SHIFT 16 + +/* Bit values for REGCTL2 */ +#define TS_CONTROLLER_EN_BIT BIT(16) +#define TS_CONTROLLER_AVGDATA_SHIFT 8 +#define TS_CONTROLLER_AVGDATA_MASK (0x7 << TS_CONTROLLER_AVGDATA_SHIFT) +#define TS_CONTROLLER_PWR_LDO BIT(5) +#define TS_CONTROLLER_PWR_ADC BIT(4) +#define TS_CONTROLLER_PWR_BGP BIT(3) +#define TS_CONTROLLER_PWR_TS BIT(2) +#define TS_WIRE_MODE_BIT BIT(1) + +#define dbg_reg(dev, priv, reg) \ + dev_dbg(dev, "%20s= 0x%08x\n", #reg, readl((priv)->regs + reg)) + +struct tsc_param { + /* Each step is 1024 us. Valid 1-256 */ + u32 scanning_period; + + /* Each step is 512 us. Valid 0-255 */ + u32 debounce_timeout; + + /* + * The settling duration (in ms) is the amount of time the tsc + * waits to allow the voltage to settle after turning on the + * drivers in detection mode. Valid values: 0-11 + * 0 = 0.008 ms + * 1 = 0.01 ms + * 2 = 0.02 ms + * 3 = 0.04 ms + * 4 = 0.08 ms + * 5 = 0.16 ms + * 6 = 0.32 ms + * 7 = 0.64 ms + * 8 = 1.28 ms + * 9 = 2.56 ms + * 10 = 5.12 ms + * 11 = 10.24 ms + */ + u32 settling_timeout; + + /* touch timeout in sample counts */ + u32 touch_timeout; + + /* + * Number of data samples which are averaged before a final data point + * is placed into the FIFO + */ + u32 average_data; + + /* FIFO threshold */ + u32 fifo_threshold; + + /* Optional standard touchscreen properties. */ + u32 max_x; + u32 max_y; + u32 fuzz_x; + u32 fuzz_y; + bool invert_x; + bool invert_y; +}; + +struct iproc_ts_priv { + struct platform_device *pdev; + struct input_dev *idev; + + void __iomem *regs; + struct clk *tsc_clk; + + int pen_status; + struct tsc_param cfg_params; +}; + +/* + * Set default values the same as hardware reset values + * except for fifo_threshold with is set to 1. + */ +static const struct tsc_param iproc_default_config = { + .scanning_period = 0x5, /* 1 to 256 */ + .debounce_timeout = 0x28, /* 0 to 255 */ + .settling_timeout = 0x7, /* 0 to 11 */ + .touch_timeout = 0xa, /* 0 to 255 */ + .average_data = 5, /* entry 5 = 32 pts */ + .fifo_threshold = 1, /* 0 to 31 */ + .max_x = X_MAX, + .max_y = Y_MAX, +}; + +static void ts_reg_dump(struct iproc_ts_priv *priv) +{ + struct device *dev = &priv->pdev->dev; + + dbg_reg(dev, priv, REGCTL1); + dbg_reg(dev, priv, REGCTL2); + dbg_reg(dev, priv, INTERRUPT_THRES); + dbg_reg(dev, priv, INTERRUPT_MASK); + dbg_reg(dev, priv, INTERRUPT_STATUS); + dbg_reg(dev, priv, CONTROLLER_STATUS); + dbg_reg(dev, priv, FIFO_DATA); + dbg_reg(dev, priv, ANALOG_CONTROL); + dbg_reg(dev, priv, AUX_DATA); + dbg_reg(dev, priv, DEBOUNCE_CNTR_STAT); + dbg_reg(dev, priv, SCAN_CNTR_STAT); + dbg_reg(dev, priv, REM_CNTR_STAT); + dbg_reg(dev, priv, SETTLING_TIMER_STAT); + dbg_reg(dev, priv, SPARE_REG); + dbg_reg(dev, priv, SOFT_BYPASS_CONTROL); + dbg_reg(dev, priv, SOFT_BYPASS_DATA); +} + +static irqreturn_t iproc_touchscreen_interrupt(int irq, void *data) +{ + struct platform_device *pdev = data; + struct iproc_ts_priv *priv = platform_get_drvdata(pdev); + u32 intr_status; + u32 raw_coordinate; + u16 x; + u16 y; + int i; + bool needs_sync = false; + + intr_status = readl(priv->regs + INTERRUPT_STATUS); + intr_status &= TS_PEN_INTR_MASK | TS_FIFO_INTR_MASK; + if (intr_status == 0) + return IRQ_NONE; + + /* Clear all interrupt status bits, write-1-clear */ + writel(intr_status, priv->regs + INTERRUPT_STATUS); + + /* Pen up/down */ + if (intr_status & TS_PEN_INTR_MASK) { + if (readl(priv->regs + CONTROLLER_STATUS) & TS_PEN_DOWN) + priv->pen_status = PEN_DOWN_STATUS; + else + priv->pen_status = PEN_UP_STATUS; + + input_report_key(priv->idev, BTN_TOUCH, priv->pen_status); + needs_sync = true; + + dev_dbg(&priv->pdev->dev, + "pen up-down (%d)\n", priv->pen_status); + } + + /* coordinates in FIFO exceed the theshold */ + if (intr_status & TS_FIFO_INTR_MASK) { + for (i = 0; i < priv->cfg_params.fifo_threshold; i++) { + raw_coordinate = readl(priv->regs + FIFO_DATA); + if (raw_coordinate == INVALID_COORD) + continue; + + /* + * The x and y coordinate are 16 bits each + * with the x in the lower 16 bits and y in the + * upper 16 bits. + */ + x = (raw_coordinate >> X_COORD_SHIFT) & + FIFO_DATA_X_Y_MASK; + y = (raw_coordinate >> Y_COORD_SHIFT) & + FIFO_DATA_X_Y_MASK; + + /* We only want to retain the 12 msb of the 16 */ + x = (x >> 4) & 0x0FFF; + y = (y >> 4) & 0x0FFF; + + /* adjust x y according to lcd tsc mount angle */ + if (priv->cfg_params.invert_x) + x = priv->cfg_params.max_x - x; + + if (priv->cfg_params.invert_y) + y = priv->cfg_params.max_y - y; + + input_report_abs(priv->idev, ABS_X, x); + input_report_abs(priv->idev, ABS_Y, y); + needs_sync = true; + + dev_dbg(&priv->pdev->dev, "xy (0x%x 0x%x)\n", x, y); + } + } + + if (needs_sync) + input_sync(priv->idev); + + return IRQ_HANDLED; +} + +static int iproc_ts_start(struct input_dev *idev) +{ + struct iproc_ts_priv *priv = input_get_drvdata(idev); + u32 val; + int error; + + /* Enable clock */ + error = clk_prepare_enable(priv->tsc_clk); + if (error) { + dev_err(&priv->pdev->dev, "%s clk_prepare_enable failed %d\n", + __func__, error); + return error; + } + + /* + * Interrupt is generated when: + * FIFO reaches the int_th value, and pen event(up/down) + */ + val = TS_PEN_INTR_MASK | TS_FIFO_INTR_MASK; + writel(val, priv->regs + INTERRUPT_MASK); + + writel(priv->cfg_params.fifo_threshold, priv->regs + INTERRUPT_THRES); + + /* Initialize control reg1 */ + val = 0; + val |= priv->cfg_params.scanning_period << SCANNING_PERIOD_SHIFT; + val |= priv->cfg_params.debounce_timeout << DEBOUNCE_TIMEOUT_SHIFT; + val |= priv->cfg_params.settling_timeout << SETTLING_TIMEOUT_SHIFT; + val |= priv->cfg_params.touch_timeout << TOUCH_TIMEOUT_SHIFT; + writel(val, priv->regs + REGCTL1); + + /* Try to clear all interrupt status */ + val = readl(priv->regs + INTERRUPT_STATUS); + val |= TS_FIFO_INTR_MASK | TS_PEN_INTR_MASK; + writel(val, priv->regs + INTERRUPT_STATUS); + + /* Initialize control reg2 */ + val = readl(priv->regs + REGCTL2); + val |= TS_CONTROLLER_EN_BIT | TS_WIRE_MODE_BIT; + + val &= ~TS_CONTROLLER_AVGDATA_MASK; + val |= priv->cfg_params.average_data << TS_CONTROLLER_AVGDATA_SHIFT; + + val &= ~(TS_CONTROLLER_PWR_LDO | /* PWR up LDO */ + TS_CONTROLLER_PWR_ADC | /* PWR up ADC */ + TS_CONTROLLER_PWR_BGP | /* PWR up BGP */ + TS_CONTROLLER_PWR_TS); /* PWR up TS */ + + writel(val, priv->regs + REGCTL2); + + ts_reg_dump(priv); + + return 0; +} + +static void iproc_ts_stop(struct input_dev *dev) +{ + u32 val; + struct iproc_ts_priv *priv = input_get_drvdata(dev); + + writel(0, priv->regs + INTERRUPT_MASK); /* Disable all interrupts */ + + /* Only power down touch screen controller */ + val = readl(priv->regs + REGCTL2); + val |= TS_CONTROLLER_PWR_TS; + writel(val, priv->regs + REGCTL2); + + clk_disable(priv->tsc_clk); +} + +static int iproc_get_tsc_config(struct device *dev, struct iproc_ts_priv *priv) +{ + struct device_node *np = dev->of_node; + u32 val; + + priv->cfg_params = iproc_default_config; + + if (!np) + return 0; + + if (of_property_read_u32(np, "scanning_period", &val) >= 0) { + if (val < 1 || val > 256) { + dev_err(dev, "scanning_period (%u) must be [1-256]\n", + val); + return -EINVAL; + } + priv->cfg_params.scanning_period = val; + } + + if (of_property_read_u32(np, "debounce_timeout", &val) >= 0) { + if (val > 255) { + dev_err(dev, "debounce_timeout (%u) must be [0-255]\n", + val); + return -EINVAL; + } + priv->cfg_params.debounce_timeout = val; + } + + if (of_property_read_u32(np, "settling_timeout", &val) >= 0) { + if (val > 11) { + dev_err(dev, "settling_timeout (%u) must be [0-11]\n", + val); + return -EINVAL; + } + priv->cfg_params.settling_timeout = val; + } + + if (of_property_read_u32(np, "touch_timeout", &val) >= 0) { + if (val > 255) { + dev_err(dev, "touch_timeout (%u) must be [0-255]\n", + val); + return -EINVAL; + } + priv->cfg_params.touch_timeout = val; + } + + if (of_property_read_u32(np, "average_data", &val) >= 0) { + if (val > 8) { + dev_err(dev, "average_data (%u) must be [0-8]\n", val); + return -EINVAL; + } + priv->cfg_params.average_data = val; + } + + if (of_property_read_u32(np, "fifo_threshold", &val) >= 0) { + if (val > 31) { + dev_err(dev, "fifo_threshold (%u)) must be [0-31]\n", + val); + return -EINVAL; + } + priv->cfg_params.fifo_threshold = val; + } + + /* Parse optional properties. */ + of_property_read_u32(np, "touchscreen-size-x", &priv->cfg_params.max_x); + of_property_read_u32(np, "touchscreen-size-y", &priv->cfg_params.max_y); + + of_property_read_u32(np, "touchscreen-fuzz-x", + &priv->cfg_params.fuzz_x); + of_property_read_u32(np, "touchscreen-fuzz-y", + &priv->cfg_params.fuzz_y); + + priv->cfg_params.invert_x = + of_property_read_bool(np, "touchscreen-inverted-x"); + priv->cfg_params.invert_y = + of_property_read_bool(np, "touchscreen-inverted-y"); + + return 0; +} + +static int iproc_ts_probe(struct platform_device *pdev) +{ + struct iproc_ts_priv *priv; + struct input_dev *idev; + struct resource *res; + int irq; + int error; + + priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + /* touchscreen controller memory mapped regs */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->regs = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(priv->regs)) { + error = PTR_ERR(priv->regs); + dev_err(&pdev->dev, "unable to map I/O memory: %d\n", error); + return error; + } + + priv->tsc_clk = devm_clk_get(&pdev->dev, "tsc_clk"); + if (IS_ERR(priv->tsc_clk)) { + error = PTR_ERR(priv->tsc_clk); + dev_err(&pdev->dev, + "failed getting clock tsc_clk: %d\n", error); + return error; + } + + priv->pdev = pdev; + error = iproc_get_tsc_config(&pdev->dev, priv); + if (error) { + dev_err(&pdev->dev, "get_tsc_config failed: %d\n", error); + return error; + } + + idev = devm_input_allocate_device(&pdev->dev); + if (!idev) { + dev_err(&pdev->dev, "failed to allocate input device\n"); + return -ENOMEM; + } + + priv->idev = idev; + priv->pen_status = PEN_UP_STATUS; + + /* Set input device info */ + idev->name = IPROC_TS_NAME; + idev->dev.parent = &pdev->dev; + + idev->id.bustype = BUS_HOST; + idev->id.vendor = SERIO_UNKNOWN; + idev->id.product = 0; + idev->id.version = 0; + + idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); + __set_bit(BTN_TOUCH, idev->keybit); + + input_set_abs_params(idev, ABS_X, X_MIN, priv->cfg_params.max_x, + priv->cfg_params.fuzz_x, 0); + input_set_abs_params(idev, ABS_Y, Y_MIN, priv->cfg_params.max_y, + priv->cfg_params.fuzz_y, 0); + + idev->open = iproc_ts_start; + idev->close = iproc_ts_stop; + + input_set_drvdata(idev, priv); + platform_set_drvdata(pdev, priv); + + /* get interrupt */ + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "platform_get_irq failed: %d\n", irq); + return irq; + } + + error = devm_request_irq(&pdev->dev, irq, + iproc_touchscreen_interrupt, + IRQF_SHARED, IPROC_TS_NAME, pdev); + if (error) + return error; + + error = input_register_device(priv->idev); + if (error) { + dev_err(&pdev->dev, + "failed to register input device: %d\n", error); + return error; + } + + return 0; +} + +static const struct of_device_id iproc_ts_of_match[] = { + {.compatible = "brcm,iproc-touchscreen", }, + { }, +}; +MODULE_DEVICE_TABLE(of, iproc_ts_of_match); + +static struct platform_driver iproc_ts_driver = { + .probe = iproc_ts_probe, + .driver = { + .name = IPROC_TS_NAME, + .of_match_table = of_match_ptr(iproc_ts_of_match), + }, +}; + +module_platform_driver(iproc_ts_driver); + +MODULE_DESCRIPTION("IPROC Touchscreen driver"); +MODULE_AUTHOR("Broadcom"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/input/touchscreen/chipone_icn8318.c b/drivers/input/touchscreen/chipone_icn8318.c new file mode 100644 index 0000000..32e9db0 --- /dev/null +++ b/drivers/input/touchscreen/chipone_icn8318.c @@ -0,0 +1,316 @@ +/* + * Driver for ChipOne icn8318 i2c touchscreen controller + * + * Copyright (c) 2015 Red Hat Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Red Hat authors: + * Hans de Goede <hdegoede@redhat.com> + */ + +#include <linux/gpio/consumer.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/input/mt.h> +#include <linux/module.h> +#include <linux/of.h> + +#define ICN8318_REG_POWER 4 +#define ICN8318_REG_TOUCHDATA 16 + +#define ICN8318_POWER_ACTIVE 0 +#define ICN8318_POWER_MONITOR 1 +#define ICN8318_POWER_HIBERNATE 2 + +#define ICN8318_MAX_TOUCHES 5 + +struct icn8318_touch { + __u8 slot; + __be16 x; + __be16 y; + __u8 pressure; /* Seems more like finger width then pressure really */ + __u8 event; +/* The difference between 2 and 3 is unclear */ +#define ICN8318_EVENT_NO_DATA 1 /* No finger seen yet since wakeup */ +#define ICN8318_EVENT_UPDATE1 2 /* New or updated coordinates */ +#define ICN8318_EVENT_UPDATE2 3 /* New or updated coordinates */ +#define ICN8318_EVENT_END 4 /* Finger lifted */ +} __packed; + +struct icn8318_touch_data { + __u8 softbutton; + __u8 touch_count; + struct icn8318_touch touches[ICN8318_MAX_TOUCHES]; +} __packed; + +struct icn8318_data { + struct i2c_client *client; + struct input_dev *input; + struct gpio_desc *wake_gpio; + u32 max_x; + u32 max_y; + bool invert_x; + bool invert_y; + bool swap_x_y; +}; + +static int icn8318_read_touch_data(struct i2c_client *client, + struct icn8318_touch_data *touch_data) +{ + u8 reg = ICN8318_REG_TOUCHDATA; + struct i2c_msg msg[2] = { + { + .addr = client->addr, + .len = 1, + .buf = ® + }, + { + .addr = client->addr, + .flags = I2C_M_RD, + .len = sizeof(struct icn8318_touch_data), + .buf = (u8 *)touch_data + } + }; + + return i2c_transfer(client->adapter, msg, 2); +} + +static inline bool icn8318_touch_active(u8 event) +{ + return (event == ICN8318_EVENT_UPDATE1) || + (event == ICN8318_EVENT_UPDATE2); +} + +static irqreturn_t icn8318_irq(int irq, void *dev_id) +{ + struct icn8318_data *data = dev_id; + struct device *dev = &data->client->dev; + struct icn8318_touch_data touch_data; + int i, ret, x, y; + + ret = icn8318_read_touch_data(data->client, &touch_data); + if (ret < 0) { + dev_err(dev, "Error reading touch data: %d\n", ret); + return IRQ_HANDLED; + } + + if (touch_data.softbutton) { + /* + * Other data is invalid when a softbutton is pressed. + * This needs some extra devicetree bindings to map the icn8318 + * softbutton codes to evdev codes. Currently no known devices + * use this. + */ + return IRQ_HANDLED; + } + + if (touch_data.touch_count > ICN8318_MAX_TOUCHES) { + dev_warn(dev, "Too much touches %d > %d\n", + touch_data.touch_count, ICN8318_MAX_TOUCHES); + touch_data.touch_count = ICN8318_MAX_TOUCHES; + } + + for (i = 0; i < touch_data.touch_count; i++) { + struct icn8318_touch *touch = &touch_data.touches[i]; + bool act = icn8318_touch_active(touch->event); + + input_mt_slot(data->input, touch->slot); + input_mt_report_slot_state(data->input, MT_TOOL_FINGER, act); + if (!act) + continue; + + x = be16_to_cpu(touch->x); + y = be16_to_cpu(touch->y); + + if (data->invert_x) + x = data->max_x - x; + + if (data->invert_y) + y = data->max_y - y; + + if (!data->swap_x_y) { + input_event(data->input, EV_ABS, ABS_MT_POSITION_X, x); + input_event(data->input, EV_ABS, ABS_MT_POSITION_Y, y); + } else { + input_event(data->input, EV_ABS, ABS_MT_POSITION_X, y); + input_event(data->input, EV_ABS, ABS_MT_POSITION_Y, x); + } + } + + input_mt_sync_frame(data->input); + input_sync(data->input); + + return IRQ_HANDLED; +} + +static int icn8318_start(struct input_dev *dev) +{ + struct icn8318_data *data = input_get_drvdata(dev); + + enable_irq(data->client->irq); + gpiod_set_value_cansleep(data->wake_gpio, 1); + + return 0; +} + +static void icn8318_stop(struct input_dev *dev) +{ + struct icn8318_data *data = input_get_drvdata(dev); + + disable_irq(data->client->irq); + i2c_smbus_write_byte_data(data->client, ICN8318_REG_POWER, + ICN8318_POWER_HIBERNATE); + gpiod_set_value_cansleep(data->wake_gpio, 0); +} + +#ifdef CONFIG_PM_SLEEP +static int icn8318_suspend(struct device *dev) +{ + struct icn8318_data *data = i2c_get_clientdata(to_i2c_client(dev)); + + mutex_lock(&data->input->mutex); + if (data->input->users) + icn8318_stop(data->input); + mutex_unlock(&data->input->mutex); + + return 0; +} + +static int icn8318_resume(struct device *dev) +{ + struct icn8318_data *data = i2c_get_clientdata(to_i2c_client(dev)); + + mutex_lock(&data->input->mutex); + if (data->input->users) + icn8318_start(data->input); + mutex_unlock(&data->input->mutex); + + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(icn8318_pm_ops, icn8318_suspend, icn8318_resume); + +static int icn8318_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct device_node *np = dev->of_node; + struct icn8318_data *data; + struct input_dev *input; + u32 fuzz_x = 0, fuzz_y = 0; + int error; + + if (!client->irq) { + dev_err(dev, "Error no irq specified\n"); + return -EINVAL; + } + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + data->wake_gpio = devm_gpiod_get(dev, "wake", GPIOD_OUT_LOW); + if (IS_ERR(data->wake_gpio)) { + error = PTR_ERR(data->wake_gpio); + if (error != -EPROBE_DEFER) + dev_err(dev, "Error getting wake gpio: %d\n", error); + return error; + } + + if (of_property_read_u32(np, "touchscreen-size-x", &data->max_x) || + of_property_read_u32(np, "touchscreen-size-y", &data->max_y)) { + dev_err(dev, "Error touchscreen-size-x and/or -y missing\n"); + return -EINVAL; + } + + /* Optional */ + of_property_read_u32(np, "touchscreen-fuzz-x", &fuzz_x); + of_property_read_u32(np, "touchscreen-fuzz-y", &fuzz_y); + data->invert_x = of_property_read_bool(np, "touchscreen-inverted-x"); + data->invert_y = of_property_read_bool(np, "touchscreen-inverted-y"); + data->swap_x_y = of_property_read_bool(np, "touchscreen-swapped-x-y"); + + input = devm_input_allocate_device(dev); + if (!input) + return -ENOMEM; + + input->name = client->name; + input->id.bustype = BUS_I2C; + input->open = icn8318_start; + input->close = icn8318_stop; + input->dev.parent = dev; + + if (!data->swap_x_y) { + input_set_abs_params(input, ABS_MT_POSITION_X, 0, + data->max_x, fuzz_x, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, 0, + data->max_y, fuzz_y, 0); + } else { + input_set_abs_params(input, ABS_MT_POSITION_X, 0, + data->max_y, fuzz_y, 0); + input_set_abs_params(input, ABS_MT_POSITION_Y, 0, + data->max_x, fuzz_x, 0); + } + + error = input_mt_init_slots(input, ICN8318_MAX_TOUCHES, + INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); + if (error) + return error; + + data->client = client; + data->input = input; + input_set_drvdata(input, data); + + error = devm_request_threaded_irq(dev, client->irq, NULL, icn8318_irq, + IRQF_ONESHOT, client->name, data); + if (error) { + dev_err(dev, "Error requesting irq: %d\n", error); + return error; + } + + /* Stop device till opened */ + icn8318_stop(data->input); + + error = input_register_device(input); + if (error) + return error; + + i2c_set_clientdata(client, data); + + return 0; +} + +static const struct of_device_id icn8318_of_match[] = { + { .compatible = "chipone,icn8318" }, + { } +}; +MODULE_DEVICE_TABLE(of, icn8318_of_match); + +/* This is useless for OF-enabled devices, but it is needed by I2C subsystem */ +static const struct i2c_device_id icn8318_i2c_id[] = { + { }, +}; +MODULE_DEVICE_TABLE(i2c, icn8318_i2c_id); + +static struct i2c_driver icn8318_driver = { + .driver = { + .owner = THIS_MODULE, + .name = "chipone_icn8318", + .pm = &icn8318_pm_ops, + .of_match_table = icn8318_of_match, + }, + .probe = icn8318_probe, + .id_table = icn8318_i2c_id, +}; + +module_i2c_driver(icn8318_driver); + +MODULE_DESCRIPTION("ChipOne icn8318 I2C Touchscreen Driver"); +MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c index d4c24fb..e6aef3e 100644 --- a/drivers/input/touchscreen/edt-ft5x06.c +++ b/drivers/input/touchscreen/edt-ft5x06.c @@ -37,6 +37,7 @@ #include <linux/gpio.h> #include <linux/of_gpio.h> #include <linux/input/mt.h> +#include <linux/input/touchscreen.h> #include <linux/input/edt-ft5x06.h> #define MAX_SUPPORT_POINTS 5 @@ -1034,7 +1035,6 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client, input->id.bustype = BUS_I2C; input->dev.parent = &client->dev; - __set_bit(EV_SYN, input->evbit); __set_bit(EV_KEY, input->evbit); __set_bit(EV_ABS, input->evbit); __set_bit(BTN_TOUCH, input->keybit); @@ -1044,6 +1044,10 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client, 0, tsdata->num_x * 64 - 1, 0, 0); input_set_abs_params(input, ABS_MT_POSITION_Y, 0, tsdata->num_y * 64 - 1, 0, 0); + + if (!pdata) + touchscreen_parse_of_params(input); + error = input_mt_init_slots(input, MAX_SUPPORT_POINTS, 0); if (error) { dev_err(&client->dev, "Unable to init MT slots.\n"); diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c index 926c58e..43b3c9c 100644 --- a/drivers/input/touchscreen/elants_i2c.c +++ b/drivers/input/touchscreen/elants_i2c.c @@ -98,7 +98,6 @@ #define MAX_FW_UPDATE_RETRIES 30 #define ELAN_FW_PAGESIZE 132 -#define ELAN_FW_FILENAME "elants_i2c.bin" /* calibration timeout definition */ #define ELAN_CALI_TIMEOUT_MSEC 10000 @@ -697,12 +696,19 @@ static int elants_i2c_fw_update(struct elants_data *ts) { struct i2c_client *client = ts->client; const struct firmware *fw; + char *fw_name; int error; - error = request_firmware(&fw, ELAN_FW_FILENAME, &client->dev); + fw_name = kasprintf(GFP_KERNEL, "elants_i2c_%4x.bin", ts->hw_version); + if (!fw_name) + return -ENOMEM; + + dev_info(&client->dev, "requesting fw name = %s\n", fw_name); + error = request_firmware(&fw, fw_name, &client->dev); + kfree(fw_name); if (error) { - dev_err(&client->dev, "failed to request firmware %s: %d\n", - ELAN_FW_FILENAME, error); + dev_err(&client->dev, "failed to request firmware: %d\n", + error); return error; } diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index ca19668..3af1698 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -23,6 +23,8 @@ #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/slab.h> +#include <linux/acpi.h> +#include <linux/of.h> #include <asm/unaligned.h> struct goodix_ts_data { @@ -48,6 +50,7 @@ struct goodix_ts_data { #define GOODIX_REG_VERSION 0x8140 #define RESOLUTION_LOC 1 +#define MAX_CONTACTS_LOC 5 #define TRIGGER_LOC 6 static const unsigned long goodix_irq_flags[] = { @@ -99,7 +102,7 @@ static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data) } touch_num = data[0] & 0x0f; - if (touch_num > GOODIX_MAX_CONTACTS) + if (touch_num > ts->max_touch_num) return -EPROTO; if (touch_num > 1) { @@ -141,7 +144,7 @@ static void goodix_ts_report_touch(struct goodix_ts_data *ts, u8 *coor_data) */ static void goodix_process_events(struct goodix_ts_data *ts) { - u8 point_data[1 + GOODIX_CONTACT_SIZE * GOODIX_MAX_CONTACTS]; + u8 point_data[1 + GOODIX_CONTACT_SIZE * ts->max_touch_num]; int touch_num; int i; @@ -202,21 +205,23 @@ static void goodix_read_config(struct goodix_ts_data *ts) ts->abs_x_max = GOODIX_MAX_WIDTH; ts->abs_y_max = GOODIX_MAX_HEIGHT; ts->int_trigger_type = GOODIX_INT_TRIGGER; + ts->max_touch_num = GOODIX_MAX_CONTACTS; return; } ts->abs_x_max = get_unaligned_le16(&config[RESOLUTION_LOC]); ts->abs_y_max = get_unaligned_le16(&config[RESOLUTION_LOC + 2]); - ts->int_trigger_type = (config[TRIGGER_LOC]) & 0x03; - if (!ts->abs_x_max || !ts->abs_y_max) { + ts->int_trigger_type = config[TRIGGER_LOC] & 0x03; + ts->max_touch_num = config[MAX_CONTACTS_LOC] & 0x0f; + if (!ts->abs_x_max || !ts->abs_y_max || !ts->max_touch_num) { dev_err(&ts->client->dev, "Invalid config, using defaults\n"); ts->abs_x_max = GOODIX_MAX_WIDTH; ts->abs_y_max = GOODIX_MAX_HEIGHT; + ts->max_touch_num = GOODIX_MAX_CONTACTS; } } - /** * goodix_read_version - Read goodix touchscreen version * @@ -295,7 +300,7 @@ static int goodix_request_input_dev(struct goodix_ts_data *ts) input_set_abs_params(ts->input_dev, ABS_MT_WIDTH_MAJOR, 0, 255, 0, 0); input_set_abs_params(ts->input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0); - input_mt_init_slots(ts->input_dev, GOODIX_MAX_CONTACTS, + input_mt_init_slots(ts->input_dev, ts->max_touch_num, INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED); ts->input_dev->name = "Goodix Capacitive TouchScreen"; @@ -372,11 +377,27 @@ static const struct i2c_device_id goodix_ts_id[] = { { } }; +#ifdef CONFIG_ACPI static const struct acpi_device_id goodix_acpi_match[] = { { "GDIX1001", 0 }, { } }; MODULE_DEVICE_TABLE(acpi, goodix_acpi_match); +#endif + +#ifdef CONFIG_OF +static const struct of_device_id goodix_of_match[] = { + { .compatible = "goodix,gt911" }, + { .compatible = "goodix,gt9110" }, + { .compatible = "goodix,gt912" }, + { .compatible = "goodix,gt927" }, + { .compatible = "goodix,gt9271" }, + { .compatible = "goodix,gt928" }, + { .compatible = "goodix,gt967" }, + { } +}; +MODULE_DEVICE_TABLE(of, goodix_of_match); +#endif static struct i2c_driver goodix_ts_driver = { .probe = goodix_ts_probe, @@ -384,7 +405,8 @@ static struct i2c_driver goodix_ts_driver = { .driver = { .name = "Goodix-TS", .owner = THIS_MODULE, - .acpi_match_table = goodix_acpi_match, + .acpi_match_table = ACPI_PTR(goodix_acpi_match), + .of_match_table = of_match_ptr(goodix_of_match), }, }; module_i2c_driver(goodix_ts_driver); diff --git a/drivers/input/touchscreen/of_touchscreen.c b/drivers/input/touchscreen/of_touchscreen.c index f8f9b84..b82b520 100644 --- a/drivers/input/touchscreen/of_touchscreen.c +++ b/drivers/input/touchscreen/of_touchscreen.c @@ -11,8 +11,41 @@ #include <linux/of.h> #include <linux/input.h> +#include <linux/input/mt.h> #include <linux/input/touchscreen.h> +static u32 of_get_optional_u32(struct device_node *np, + const char *property) +{ + u32 val = 0; + + of_property_read_u32(np, property, &val); + + return val; +} + +static void touchscreen_set_params(struct input_dev *dev, + unsigned long axis, + int max, int fuzz) +{ + struct input_absinfo *absinfo; + + if (!test_bit(axis, dev->absbit)) { + /* + * Emit a warning only if the axis is not a multitouch + * axis, which might not be set by the driver. + */ + if (!input_is_mt_axis(axis)) + dev_warn(&dev->dev, + "DT specifies parameters but the axis is not set up\n"); + return; + } + + absinfo = &dev->absinfo[axis]; + absinfo->maximum = max; + absinfo->fuzz = fuzz; +} + /** * touchscreen_parse_of_params - parse common touchscreen DT properties * @dev: device that should be parsed @@ -24,22 +57,31 @@ void touchscreen_parse_of_params(struct input_dev *dev) { struct device_node *np = dev->dev.parent->of_node; - struct input_absinfo *absinfo; + u32 maximum, fuzz; input_alloc_absinfo(dev); if (!dev->absinfo) return; - absinfo = &dev->absinfo[ABS_X]; - of_property_read_u32(np, "touchscreen-size-x", &absinfo->maximum); - of_property_read_u32(np, "touchscreen-fuzz-x", &absinfo->fuzz); + maximum = of_get_optional_u32(np, "touchscreen-size-x"); + fuzz = of_get_optional_u32(np, "touchscreen-fuzz-x"); + if (maximum || fuzz) { + touchscreen_set_params(dev, ABS_X, maximum, fuzz); + touchscreen_set_params(dev, ABS_MT_POSITION_X, maximum, fuzz); + } - absinfo = &dev->absinfo[ABS_Y]; - of_property_read_u32(np, "touchscreen-size-y", &absinfo->maximum); - of_property_read_u32(np, "touchscreen-fuzz-y", &absinfo->fuzz); + maximum = of_get_optional_u32(np, "touchscreen-size-y"); + fuzz = of_get_optional_u32(np, "touchscreen-fuzz-y"); + if (maximum || fuzz) { + touchscreen_set_params(dev, ABS_Y, maximum, fuzz); + touchscreen_set_params(dev, ABS_MT_POSITION_Y, maximum, fuzz); + } - absinfo = &dev->absinfo[ABS_PRESSURE]; - of_property_read_u32(np, "touchscreen-max-pressure", &absinfo->maximum); - of_property_read_u32(np, "touchscreen-fuzz-pressure", &absinfo->fuzz); + maximum = of_get_optional_u32(np, "touchscreen-max-pressure"); + fuzz = of_get_optional_u32(np, "touchscreen-fuzz-pressure"); + if (maximum || fuzz) { + touchscreen_set_params(dev, ABS_PRESSURE, maximum, fuzz); + touchscreen_set_params(dev, ABS_MT_PRESSURE, maximum, fuzz); + } } EXPORT_SYMBOL(touchscreen_parse_of_params); diff --git a/drivers/input/touchscreen/sun4i-ts.c b/drivers/input/touchscreen/sun4i-ts.c index b93a28b..c011699 100644 --- a/drivers/input/touchscreen/sun4i-ts.c +++ b/drivers/input/touchscreen/sun4i-ts.c @@ -30,6 +30,10 @@ * These kinds of heuristics are just asking for trouble (and don't belong * in the kernel). So this driver offers straight forward, reliable single * touch functionality only. + * + * s.a. A20 User Manual "1.15 TP" (Documentation/arm/sunxi/README) + * (looks like the description in the A20 User Manual v1.3 is better + * than the one in the A10 User Manual v.1.5) */ #include <linux/err.h> @@ -193,7 +197,7 @@ static int sun4i_get_temp(const struct sun4i_ts_data *ts, long *temp) if (ts->temp_data == -1) return -EAGAIN; - *temp = (ts->temp_data - ts->temp_offset) * ts->temp_step; + *temp = ts->temp_data * ts->temp_step - ts->temp_offset; return 0; } @@ -246,6 +250,8 @@ static int sun4i_ts_probe(struct platform_device *pdev) int error; u32 reg; bool ts_attached; + u32 tp_sensitive_adjust = 15; + u32 filter_type = 1; ts = devm_kzalloc(dev, sizeof(struct sun4i_ts_data), GFP_KERNEL); if (!ts) @@ -255,22 +261,31 @@ static int sun4i_ts_probe(struct platform_device *pdev) ts->ignore_fifo_data = true; ts->temp_data = -1; if (of_device_is_compatible(np, "allwinner,sun6i-a31-ts")) { - /* Allwinner SDK has temperature = -271 + (value / 6) (C) */ - ts->temp_offset = 1626; + /* Allwinner SDK has temperature (C) = (value / 6) - 271 */ + ts->temp_offset = 271000; ts->temp_step = 167; + } else if (of_device_is_compatible(np, "allwinner,sun4i-a10-ts")) { + /* + * The A10 temperature sensor has quite a wide spread, these + * parameters are based on the averaging of the calibration + * results of 4 completely different boards, with a spread of + * temp_step from 0.096 - 0.170 and temp_offset from 176 - 331. + */ + ts->temp_offset = 257000; + ts->temp_step = 133; } else { /* * The user manuals do not contain the formula for calculating * the temperature. The formula used here is from the AXP209, * which is designed by X-Powers, an affiliate of Allwinner: * - * temperature = -144.7 + (value * 0.1) + * temperature (C) = (value * 0.1) - 144.7 * * Allwinner does not have any documentation whatsoever for * this hardware. Moreover, it is claimed that the sensor * is inaccurate and cannot work properly. */ - ts->temp_offset = 1447; + ts->temp_offset = 144700; ts->temp_step = 100; } @@ -313,14 +328,20 @@ static int sun4i_ts_probe(struct platform_device *pdev) ts->base + TP_CTRL0); /* - * sensitive_adjust = 15 : max, which is not all that sensitive, + * tp_sensitive_adjust is an optional property * tp_mode = 0 : only x and y coordinates, as we don't use dual touch */ - writel(TP_SENSITIVE_ADJUST(15) | TP_MODE_SELECT(0), + of_property_read_u32(np, "allwinner,tp-sensitive-adjust", + &tp_sensitive_adjust); + writel(TP_SENSITIVE_ADJUST(tp_sensitive_adjust) | TP_MODE_SELECT(0), ts->base + TP_CTRL2); - /* Enable median filter, type 1 : 5/3 */ - writel(FILTER_EN(1) | FILTER_TYPE(1), ts->base + TP_CTRL3); + /* + * Enable median and averaging filter, optional property for + * filter type. + */ + of_property_read_u32(np, "allwinner,filter-type", &filter_type); + writel(FILTER_EN(1) | FILTER_TYPE(filter_type), ts->base + TP_CTRL3); /* Enable temperature measurement, period 1953 (2 seconds) */ writel(TEMP_ENABLE(1) | TEMP_PERIOD(1953), ts->base + TP_TPR); @@ -330,10 +351,10 @@ static int sun4i_ts_probe(struct platform_device *pdev) * finally enable tp mode. */ reg = STYLUS_UP_DEBOUN(5) | STYLUS_UP_DEBOUN_EN(1); - if (of_device_is_compatible(np, "allwinner,sun4i-a10-ts")) - reg |= TP_MODE_EN(1); - else + if (of_device_is_compatible(np, "allwinner,sun6i-a31-ts")) reg |= SUN6I_TP_MODE_EN(1); + else + reg |= TP_MODE_EN(1); writel(reg, ts->base + TP_CTRL1); /* @@ -383,6 +404,7 @@ static int sun4i_ts_remove(struct platform_device *pdev) static const struct of_device_id sun4i_ts_of_match[] = { { .compatible = "allwinner,sun4i-a10-ts", }, + { .compatible = "allwinner,sun5i-a13-ts", }, { .compatible = "allwinner,sun6i-a31-ts", }, { /* sentinel */ } }; diff --git a/drivers/input/touchscreen/sx8654.c b/drivers/input/touchscreen/sx8654.c new file mode 100644 index 0000000..aecb9ad --- /dev/null +++ b/drivers/input/touchscreen/sx8654.c @@ -0,0 +1,286 @@ +/* + * Driver for Semtech SX8654 I2C touchscreen controller. + * + * Copyright (c) 2015 Armadeus Systems + * Sébastien Szymanski <sebastien.szymanski@armadeus.com> + * + * Using code from: + * - sx865x.c + * Copyright (c) 2013 U-MoBo Srl + * Pierluigi Passaro <p.passaro@u-mobo.com> + * - sx8650.c + * Copyright (c) 2009 Wayne Roberts + * - tsc2007.c + * Copyright (c) 2008 Kwangwoo Lee + * - ads7846.c + * Copyright (c) 2005 David Brownell + * Copyright (c) 2006 Nokia Corporation + * - corgi_ts.c + * Copyright (C) 2004-2005 Richard Purdie + * - omap_ts.[hc], ads7846.h, ts_osk.c + * Copyright (C) 2002 MontaVista Software + * Copyright (C) 2004 Texas Instruments + * Copyright (C) 2005 Dirk Behme + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/input.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/irq.h> + +/* register addresses */ +#define I2C_REG_TOUCH0 0x00 +#define I2C_REG_TOUCH1 0x01 +#define I2C_REG_CHANMASK 0x04 +#define I2C_REG_IRQMASK 0x22 +#define I2C_REG_IRQSRC 0x23 +#define I2C_REG_SOFTRESET 0x3f + +/* commands */ +#define CMD_READ_REGISTER 0x40 +#define CMD_MANUAL 0xc0 +#define CMD_PENTRG 0xe0 + +/* value for I2C_REG_SOFTRESET */ +#define SOFTRESET_VALUE 0xde + +/* bits for I2C_REG_IRQSRC */ +#define IRQ_PENTOUCH_TOUCHCONVDONE 0x08 +#define IRQ_PENRELEASE 0x04 + +/* bits for RegTouch1 */ +#define CONDIRQ 0x20 +#define FILT_7SA 0x03 + +/* bits for I2C_REG_CHANMASK */ +#define CONV_X 0x80 +#define CONV_Y 0x40 + +/* coordinates rate: higher nibble of CTRL0 register */ +#define RATE_MANUAL 0x00 +#define RATE_5000CPS 0xf0 + +/* power delay: lower nibble of CTRL0 register */ +#define POWDLY_1_1MS 0x0b + +#define MAX_12BIT ((1 << 12) - 1) + +struct sx8654 { + struct input_dev *input; + struct i2c_client *client; +}; + +static irqreturn_t sx8654_irq(int irq, void *handle) +{ + struct sx8654 *sx8654 = handle; + int irqsrc; + u8 data[4]; + unsigned int x, y; + int retval; + + irqsrc = i2c_smbus_read_byte_data(sx8654->client, + CMD_READ_REGISTER | I2C_REG_IRQSRC); + dev_dbg(&sx8654->client->dev, "irqsrc = 0x%x", irqsrc); + + if (irqsrc < 0) + goto out; + + if (irqsrc & IRQ_PENRELEASE) { + dev_dbg(&sx8654->client->dev, "pen release interrupt"); + + input_report_key(sx8654->input, BTN_TOUCH, 0); + input_sync(sx8654->input); + } + + if (irqsrc & IRQ_PENTOUCH_TOUCHCONVDONE) { + dev_dbg(&sx8654->client->dev, "pen touch interrupt"); + + retval = i2c_master_recv(sx8654->client, data, sizeof(data)); + if (retval != sizeof(data)) + goto out; + + /* invalid data */ + if (unlikely(data[0] & 0x80 || data[2] & 0x80)) + goto out; + + x = ((data[0] & 0xf) << 8) | (data[1]); + y = ((data[2] & 0xf) << 8) | (data[3]); + + input_report_abs(sx8654->input, ABS_X, x); + input_report_abs(sx8654->input, ABS_Y, y); + input_report_key(sx8654->input, BTN_TOUCH, 1); + input_sync(sx8654->input); + + dev_dbg(&sx8654->client->dev, "point(%4d,%4d)\n", x, y); + } + +out: + return IRQ_HANDLED; +} + +static int sx8654_open(struct input_dev *dev) +{ + struct sx8654 *sx8654 = input_get_drvdata(dev); + struct i2c_client *client = sx8654->client; + int error; + + /* enable pen trigger mode */ + error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH0, + RATE_5000CPS | POWDLY_1_1MS); + if (error) { + dev_err(&client->dev, "writing to I2C_REG_TOUCH0 failed"); + return error; + } + + error = i2c_smbus_write_byte(client, CMD_PENTRG); + if (error) { + dev_err(&client->dev, "writing command CMD_PENTRG failed"); + return error; + } + + enable_irq(client->irq); + + return 0; +} + +static void sx8654_close(struct input_dev *dev) +{ + struct sx8654 *sx8654 = input_get_drvdata(dev); + struct i2c_client *client = sx8654->client; + int error; + + disable_irq(client->irq); + + /* enable manual mode mode */ + error = i2c_smbus_write_byte(client, CMD_MANUAL); + if (error) { + dev_err(&client->dev, "writing command CMD_MANUAL failed"); + return; + } + + error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH0, 0); + if (error) { + dev_err(&client->dev, "writing to I2C_REG_TOUCH0 failed"); + return; + } +} + +static int sx8654_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct sx8654 *sx8654; + struct input_dev *input; + int error; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_READ_WORD_DATA)) + return -ENXIO; + + sx8654 = devm_kzalloc(&client->dev, sizeof(*sx8654), GFP_KERNEL); + if (!sx8654) + return -ENOMEM; + + input = devm_input_allocate_device(&client->dev); + if (!sx8654) + return -ENOMEM; + + input->name = "SX8654 I2C Touchscreen"; + input->id.bustype = BUS_I2C; + input->dev.parent = &client->dev; + input->open = sx8654_open; + input->close = sx8654_close; + + __set_bit(INPUT_PROP_DIRECT, input->propbit); + input_set_capability(input, EV_KEY, BTN_TOUCH); + input_set_abs_params(input, ABS_X, 0, MAX_12BIT, 0, 0); + input_set_abs_params(input, ABS_Y, 0, MAX_12BIT, 0, 0); + + sx8654->client = client; + sx8654->input = input; + + input_set_drvdata(sx8654->input, sx8654); + + error = i2c_smbus_write_byte_data(client, I2C_REG_SOFTRESET, + SOFTRESET_VALUE); + if (error) { + dev_err(&client->dev, "writing softreset value failed"); + return error; + } + + error = i2c_smbus_write_byte_data(client, I2C_REG_CHANMASK, + CONV_X | CONV_Y); + if (error) { + dev_err(&client->dev, "writing to I2C_REG_CHANMASK failed"); + return error; + } + + error = i2c_smbus_write_byte_data(client, I2C_REG_IRQMASK, + IRQ_PENTOUCH_TOUCHCONVDONE | + IRQ_PENRELEASE); + if (error) { + dev_err(&client->dev, "writing to I2C_REG_IRQMASK failed"); + return error; + } + + error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH1, + CONDIRQ | FILT_7SA); + if (error) { + dev_err(&client->dev, "writing to I2C_REG_TOUCH1 failed"); + return error; + } + + error = devm_request_threaded_irq(&client->dev, client->irq, + NULL, sx8654_irq, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + client->name, sx8654); + if (error) { + dev_err(&client->dev, + "Failed to enable IRQ %d, error: %d\n", + client->irq, error); + return error; + } + + /* Disable the IRQ, we'll enable it in sx8654_open() */ + disable_irq(client->irq); + + error = input_register_device(sx8654->input); + if (error) + return error; + + i2c_set_clientdata(client, sx8654); + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id sx8654_of_match[] = { + { .compatible = "semtech,sx8654", }, + { }, +}; +MODULE_DEVICE_TABLE(of, sx8654_of_match); +#endif + +static const struct i2c_device_id sx8654_id_table[] = { + { "semtech_sx8654", 0 }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, sx8654_id_table); + +static struct i2c_driver sx8654_driver = { + .driver = { + .name = "sx8654", + .of_match_table = of_match_ptr(sx8654_of_match), + }, + .id_table = sx8654_id_table, + .probe = sx8654_probe, +}; +module_i2c_driver(sx8654_driver); + +MODULE_AUTHOR("Sébastien Szymanski <sebastien.szymanski@armadeus.com>"); +MODULE_DESCRIPTION("Semtech SX8654 I2C Touchscreen Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c index 1bf9906..ccc8aa6 100644 --- a/drivers/input/touchscreen/tsc2007.c +++ b/drivers/input/touchscreen/tsc2007.c @@ -75,7 +75,7 @@ struct tsc2007 { u16 model; u16 x_plate_ohms; u16 max_rt; - unsigned long poll_period; + unsigned long poll_period; /* in jiffies */ int fuzzx; int fuzzy; int fuzzz; @@ -214,8 +214,7 @@ static irqreturn_t tsc2007_soft_irq(int irq, void *handle) dev_dbg(&ts->client->dev, "ignored pressure %d\n", rt); } - wait_event_timeout(ts->wait, ts->stopped, - msecs_to_jiffies(ts->poll_period)); + wait_event_timeout(ts->wait, ts->stopped, ts->poll_period); } dev_dbg(&ts->client->dev, "UP\n"); @@ -314,9 +313,9 @@ static int tsc2007_probe_dt(struct i2c_client *client, struct tsc2007 *ts) ts->fuzzz = val32; if (!of_property_read_u64(np, "ti,poll-period", &val64)) - ts->poll_period = val64; + ts->poll_period = msecs_to_jiffies(val64); else - ts->poll_period = 1; + ts->poll_period = msecs_to_jiffies(1); if (!of_property_read_u32(np, "ti,x-plate-ohms", &val32)) { ts->x_plate_ohms = val32; @@ -350,7 +349,7 @@ static int tsc2007_probe_pdev(struct i2c_client *client, struct tsc2007 *ts, ts->model = pdata->model; ts->x_plate_ohms = pdata->x_plate_ohms; ts->max_rt = pdata->max_rt ? : MAX_12BIT; - ts->poll_period = pdata->poll_period ? : 1; + ts->poll_period = msecs_to_jiffies(pdata->poll_period ? : 1); ts->get_pendown_state = pdata->get_pendown_state; ts->clear_penirq = pdata->clear_penirq; ts->fuzzx = pdata->fuzzx; diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c index a096633..f2c6c35 100644 --- a/drivers/input/touchscreen/usbtouchscreen.c +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -132,6 +132,7 @@ enum { DEVTYPE_GUNZE, DEVTYPE_DMC_TSC10, DEVTYPE_IRTOUCH, + DEVTYPE_IRTOUCH_HIRES, DEVTYPE_IDEALTEK, DEVTYPE_GENERAL_TOUCH, DEVTYPE_GOTOP, @@ -198,6 +199,7 @@ static const struct usb_device_id usbtouch_devices[] = { #ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH {USB_DEVICE(0x595a, 0x0001), .driver_info = DEVTYPE_IRTOUCH}, {USB_DEVICE(0x6615, 0x0001), .driver_info = DEVTYPE_IRTOUCH}, + {USB_DEVICE(0x6615, 0x0012), .driver_info = DEVTYPE_IRTOUCH_HIRES}, #endif #ifdef CONFIG_TOUCHSCREEN_USB_IDEALTEK @@ -1177,6 +1179,15 @@ static struct usbtouch_device_info usbtouch_dev_info[] = { .rept_size = 8, .read_data = irtouch_read_data, }, + + [DEVTYPE_IRTOUCH_HIRES] = { + .min_xc = 0x0, + .max_xc = 0x7fff, + .min_yc = 0x0, + .max_yc = 0x7fff, + .rept_size = 8, + .read_data = irtouch_read_data, + }, #endif #ifdef CONFIG_TOUCHSCREEN_USB_IDEALTEK |