diff options
Diffstat (limited to 'drivers/md/raid5.h')
| -rw-r--r-- | drivers/md/raid5.h | 99 |
1 files changed, 51 insertions, 48 deletions
diff --git a/drivers/md/raid5.h b/drivers/md/raid5.h index 3ca77a2..11b9566 100644 --- a/drivers/md/raid5.h +++ b/drivers/md/raid5.h @@ -6,11 +6,11 @@ /* * - * Each stripe contains one buffer per disc. Each buffer can be in + * Each stripe contains one buffer per device. Each buffer can be in * one of a number of states stored in "flags". Changes between - * these states happen *almost* exclusively under a per-stripe - * spinlock. Some very specific changes can happen in bi_end_io, and - * these are not protected by the spin lock. + * these states happen *almost* exclusively under the protection of the + * STRIPE_ACTIVE flag. Some very specific changes can happen in bi_end_io, and + * these are not protected by STRIPE_ACTIVE. * * The flag bits that are used to represent these states are: * R5_UPTODATE and R5_LOCKED @@ -76,12 +76,10 @@ * block and the cached buffer are successfully written, any buffer on * a written list can be returned with b_end_io. * - * The write list and read list both act as fifos. The read list is - * protected by the device_lock. The write and written lists are - * protected by the stripe lock. The device_lock, which can be - * claimed while the stipe lock is held, is only for list - * manipulations and will only be held for a very short time. It can - * be claimed from interrupts. + * The write list and read list both act as fifos. The read list, + * write list and written list are protected by the device_lock. + * The device_lock is only for list manipulations and will only be + * held for a very short time. It can be claimed from interrupts. * * * Stripes in the stripe cache can be on one of two lists (or on @@ -96,7 +94,6 @@ * * The inactive_list, handle_list and hash bucket lists are all protected by the * device_lock. - * - stripes on the inactive_list never have their stripe_lock held. * - stripes have a reference counter. If count==0, they are on a list. * - If a stripe might need handling, STRIPE_HANDLE is set. * - When refcount reaches zero, then if STRIPE_HANDLE it is put on @@ -116,10 +113,10 @@ * attach a request to an active stripe (add_stripe_bh()) * lockdev attach-buffer unlockdev * handle a stripe (handle_stripe()) - * lockstripe clrSTRIPE_HANDLE ... + * setSTRIPE_ACTIVE, clrSTRIPE_HANDLE ... * (lockdev check-buffers unlockdev) .. * change-state .. - * record io/ops needed unlockstripe schedule io/ops + * record io/ops needed clearSTRIPE_ACTIVE schedule io/ops * release an active stripe (release_stripe()) * lockdev if (!--cnt) { if STRIPE_HANDLE, add to handle_list else add to inactive-list } unlockdev * @@ -128,8 +125,7 @@ * on a cached buffer, and plus one if the stripe is undergoing stripe * operations. * - * Stripe operations are performed outside the stripe lock, - * the stripe operations are: + * The stripe operations are: * -copying data between the stripe cache and user application buffers * -computing blocks to save a disk access, or to recover a missing block * -updating the parity on a write operation (reconstruct write and @@ -159,7 +155,8 @@ */ /* - * Operations state - intermediate states that are visible outside of sh->lock + * Operations state - intermediate states that are visible outside of + * STRIPE_ACTIVE. * In general _idle indicates nothing is running, _run indicates a data * processing operation is active, and _result means the data processing result * is stable and can be acted upon. For simple operations like biofill and @@ -209,7 +206,6 @@ struct stripe_head { short ddf_layout;/* use DDF ordering to calculate Q */ unsigned long state; /* state flags */ atomic_t count; /* nr of active thread/requests */ - spinlock_t lock; int bm_seq; /* sequence number for bitmap flushes */ int disks; /* disks in stripe */ enum check_states check_state; @@ -240,19 +236,20 @@ struct stripe_head { }; /* stripe_head_state - collects and tracks the dynamic state of a stripe_head - * for handle_stripe. It is only valid under spin_lock(sh->lock); + * for handle_stripe. */ struct stripe_head_state { int syncing, expanding, expanded; int locked, uptodate, to_read, to_write, failed, written; int to_fill, compute, req_compute, non_overwrite; - int failed_num; + int failed_num[2]; + int p_failed, q_failed; + int dec_preread_active; unsigned long ops_request; -}; -/* r6_state - extra state data only relevant to r6 */ -struct r6_state { - int p_failed, q_failed, failed_num[2]; + struct bio *return_bi; + mdk_rdev_t *blocked_rdev; + int handle_bad_blocks; }; /* Flags */ @@ -268,14 +265,16 @@ struct r6_state { #define R5_ReWrite 9 /* have tried to over-write the readerror */ #define R5_Expanded 10 /* This block now has post-expand data */ -#define R5_Wantcompute 11 /* compute_block in progress treat as - * uptodate - */ -#define R5_Wantfill 12 /* dev->toread contains a bio that needs - * filling - */ -#define R5_Wantdrain 13 /* dev->towrite needs to be drained */ -#define R5_WantFUA 14 /* Write should be FUA */ +#define R5_Wantcompute 11 /* compute_block in progress treat as + * uptodate + */ +#define R5_Wantfill 12 /* dev->toread contains a bio that needs + * filling + */ +#define R5_Wantdrain 13 /* dev->towrite needs to be drained */ +#define R5_WantFUA 14 /* Write should be FUA */ +#define R5_WriteError 15 /* got a write error - need to record it */ +#define R5_MadeGood 16 /* A bad block has been fixed by writing to it*/ /* * Write method */ @@ -289,21 +288,25 @@ struct r6_state { /* * Stripe state */ -#define STRIPE_HANDLE 2 -#define STRIPE_SYNCING 3 -#define STRIPE_INSYNC 4 -#define STRIPE_PREREAD_ACTIVE 5 -#define STRIPE_DELAYED 6 -#define STRIPE_DEGRADED 7 -#define STRIPE_BIT_DELAY 8 -#define STRIPE_EXPANDING 9 -#define STRIPE_EXPAND_SOURCE 10 -#define STRIPE_EXPAND_READY 11 -#define STRIPE_IO_STARTED 12 /* do not count towards 'bypass_count' */ -#define STRIPE_FULL_WRITE 13 /* all blocks are set to be overwritten */ -#define STRIPE_BIOFILL_RUN 14 -#define STRIPE_COMPUTE_RUN 15 -#define STRIPE_OPS_REQ_PENDING 16 +enum { + STRIPE_ACTIVE, + STRIPE_HANDLE, + STRIPE_SYNC_REQUESTED, + STRIPE_SYNCING, + STRIPE_INSYNC, + STRIPE_PREREAD_ACTIVE, + STRIPE_DELAYED, + STRIPE_DEGRADED, + STRIPE_BIT_DELAY, + STRIPE_EXPANDING, + STRIPE_EXPAND_SOURCE, + STRIPE_EXPAND_READY, + STRIPE_IO_STARTED, /* do not count towards 'bypass_count' */ + STRIPE_FULL_WRITE, /* all blocks are set to be overwritten */ + STRIPE_BIOFILL_RUN, + STRIPE_COMPUTE_RUN, + STRIPE_OPS_REQ_PENDING, +}; /* * Operation request flags @@ -336,7 +339,7 @@ struct r6_state { * PREREAD_ACTIVE. * In stripe_handle, if we find pre-reading is necessary, we do it if * PREREAD_ACTIVE is set, else we set DELAYED which will send it to the delayed queue. - * HANDLE gets cleared if stripe_handle leave nothing locked. + * HANDLE gets cleared if stripe_handle leaves nothing locked. */ @@ -399,7 +402,7 @@ struct raid5_private_data { * (fresh device added). * Cleared when a sync completes. */ - + int recovery_disabled; /* per cpu variables */ struct raid5_percpu { struct page *spare_page; /* Used when checking P/Q in raid6 */ |