diff options
Diffstat (limited to 'drivers/media/platform/davinci/vpif.c')
-rw-r--r-- | drivers/media/platform/davinci/vpif.c | 514 |
1 files changed, 514 insertions, 0 deletions
diff --git a/drivers/media/platform/davinci/vpif.c b/drivers/media/platform/davinci/vpif.c new file mode 100644 index 0000000..9bd3caa --- /dev/null +++ b/drivers/media/platform/davinci/vpif.c @@ -0,0 +1,514 @@ +/* + * vpif - Video Port Interface driver + * VPIF is a receiver and transmitter for video data. It has two channels(0, 1) + * that receiveing video byte stream and two channels(2, 3) for video output. + * The hardware supports SDTV, HDTV formats, raw data capture. + * Currently, the driver supports NTSC and PAL standards. + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <mach/hardware.h> + +#include "vpif.h" + +MODULE_DESCRIPTION("TI DaVinci Video Port Interface driver"); +MODULE_LICENSE("GPL"); + +#define VPIF_CH0_MAX_MODES (22) +#define VPIF_CH1_MAX_MODES (02) +#define VPIF_CH2_MAX_MODES (15) +#define VPIF_CH3_MAX_MODES (02) + +static resource_size_t res_len; +static struct resource *res; +spinlock_t vpif_lock; + +void __iomem *vpif_base; +struct clk *vpif_clk; + +/** + * ch_params: video standard configuration parameters for vpif + * The table must include all presets from supported subdevices. + */ +const struct vpif_channel_config_params ch_params[] = { + /* HDTV formats */ + { + .name = "480p59_94", + .width = 720, + .height = 480, + .frm_fmt = 1, + .ycmux_mode = 0, + .eav2sav = 138-8, + .sav2eav = 720, + .l1 = 1, + .l3 = 43, + .l5 = 523, + .vsize = 525, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_preset = V4L2_DV_480P59_94, + }, + { + .name = "576p50", + .width = 720, + .height = 576, + .frm_fmt = 1, + .ycmux_mode = 0, + .eav2sav = 144-8, + .sav2eav = 720, + .l1 = 1, + .l3 = 45, + .l5 = 621, + .vsize = 625, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_preset = V4L2_DV_576P50, + }, + { + .name = "720p50", + .width = 1280, + .height = 720, + .frm_fmt = 1, + .ycmux_mode = 0, + .eav2sav = 700-8, + .sav2eav = 1280, + .l1 = 1, + .l3 = 26, + .l5 = 746, + .vsize = 750, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_preset = V4L2_DV_720P50, + }, + { + .name = "720p60", + .width = 1280, + .height = 720, + .frm_fmt = 1, + .ycmux_mode = 0, + .eav2sav = 370 - 8, + .sav2eav = 1280, + .l1 = 1, + .l3 = 26, + .l5 = 746, + .vsize = 750, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_preset = V4L2_DV_720P60, + }, + { + .name = "1080I50", + .width = 1920, + .height = 1080, + .frm_fmt = 0, + .ycmux_mode = 0, + .eav2sav = 720 - 8, + .sav2eav = 1920, + .l1 = 1, + .l3 = 21, + .l5 = 561, + .l7 = 563, + .l9 = 584, + .l11 = 1124, + .vsize = 1125, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_preset = V4L2_DV_1080I50, + }, + { + .name = "1080I60", + .width = 1920, + .height = 1080, + .frm_fmt = 0, + .ycmux_mode = 0, + .eav2sav = 280 - 8, + .sav2eav = 1920, + .l1 = 1, + .l3 = 21, + .l5 = 561, + .l7 = 563, + .l9 = 584, + .l11 = 1124, + .vsize = 1125, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_preset = V4L2_DV_1080I60, + }, + { + .name = "1080p60", + .width = 1920, + .height = 1080, + .frm_fmt = 1, + .ycmux_mode = 0, + .eav2sav = 280 - 8, + .sav2eav = 1920, + .l1 = 1, + .l3 = 42, + .l5 = 1122, + .vsize = 1125, + .capture_format = 0, + .vbi_supported = 0, + .hd_sd = 1, + .dv_preset = V4L2_DV_1080P60, + }, + + /* SDTV formats */ + { + .name = "NTSC_M", + .width = 720, + .height = 480, + .frm_fmt = 0, + .ycmux_mode = 1, + .eav2sav = 268, + .sav2eav = 1440, + .l1 = 1, + .l3 = 23, + .l5 = 263, + .l7 = 266, + .l9 = 286, + .l11 = 525, + .vsize = 525, + .capture_format = 0, + .vbi_supported = 1, + .hd_sd = 0, + .stdid = V4L2_STD_525_60, + }, + { + .name = "PAL_BDGHIK", + .width = 720, + .height = 576, + .frm_fmt = 0, + .ycmux_mode = 1, + .eav2sav = 280, + .sav2eav = 1440, + .l1 = 1, + .l3 = 23, + .l5 = 311, + .l7 = 313, + .l9 = 336, + .l11 = 624, + .vsize = 625, + .capture_format = 0, + .vbi_supported = 1, + .hd_sd = 0, + .stdid = V4L2_STD_625_50, + }, +}; + +const unsigned int vpif_ch_params_count = ARRAY_SIZE(ch_params); + +static inline void vpif_wr_bit(u32 reg, u32 bit, u32 val) +{ + if (val) + vpif_set_bit(reg, bit); + else + vpif_clr_bit(reg, bit); +} + +/* This structure is used to keep track of VPIF size register's offsets */ +struct vpif_registers { + u32 h_cfg, v_cfg_00, v_cfg_01, v_cfg_02, v_cfg, ch_ctrl; + u32 line_offset, vanc0_strt, vanc0_size, vanc1_strt; + u32 vanc1_size, width_mask, len_mask; + u8 max_modes; +}; + +static const struct vpif_registers vpifregs[VPIF_NUM_CHANNELS] = { + /* Channel0 */ + { + VPIF_CH0_H_CFG, VPIF_CH0_V_CFG_00, VPIF_CH0_V_CFG_01, + VPIF_CH0_V_CFG_02, VPIF_CH0_V_CFG_03, VPIF_CH0_CTRL, + VPIF_CH0_IMG_ADD_OFST, 0, 0, 0, 0, 0x1FFF, 0xFFF, + VPIF_CH0_MAX_MODES, + }, + /* Channel1 */ + { + VPIF_CH1_H_CFG, VPIF_CH1_V_CFG_00, VPIF_CH1_V_CFG_01, + VPIF_CH1_V_CFG_02, VPIF_CH1_V_CFG_03, VPIF_CH1_CTRL, + VPIF_CH1_IMG_ADD_OFST, 0, 0, 0, 0, 0x1FFF, 0xFFF, + VPIF_CH1_MAX_MODES, + }, + /* Channel2 */ + { + VPIF_CH2_H_CFG, VPIF_CH2_V_CFG_00, VPIF_CH2_V_CFG_01, + VPIF_CH2_V_CFG_02, VPIF_CH2_V_CFG_03, VPIF_CH2_CTRL, + VPIF_CH2_IMG_ADD_OFST, VPIF_CH2_VANC0_STRT, VPIF_CH2_VANC0_SIZE, + VPIF_CH2_VANC1_STRT, VPIF_CH2_VANC1_SIZE, 0x7FF, 0x7FF, + VPIF_CH2_MAX_MODES + }, + /* Channel3 */ + { + VPIF_CH3_H_CFG, VPIF_CH3_V_CFG_00, VPIF_CH3_V_CFG_01, + VPIF_CH3_V_CFG_02, VPIF_CH3_V_CFG_03, VPIF_CH3_CTRL, + VPIF_CH3_IMG_ADD_OFST, VPIF_CH3_VANC0_STRT, VPIF_CH3_VANC0_SIZE, + VPIF_CH3_VANC1_STRT, VPIF_CH3_VANC1_SIZE, 0x7FF, 0x7FF, + VPIF_CH3_MAX_MODES + }, +}; + +/* vpif_set_mode_info: + * This function is used to set horizontal and vertical config parameters + * As per the standard in the channel, configure the values of L1, L3, + * L5, L7 L9, L11 in VPIF Register , also write width and height + */ +static void vpif_set_mode_info(const struct vpif_channel_config_params *config, + u8 channel_id, u8 config_channel_id) +{ + u32 value; + + value = (config->eav2sav & vpifregs[config_channel_id].width_mask); + value <<= VPIF_CH_LEN_SHIFT; + value |= (config->sav2eav & vpifregs[config_channel_id].width_mask); + regw(value, vpifregs[channel_id].h_cfg); + + value = (config->l1 & vpifregs[config_channel_id].len_mask); + value <<= VPIF_CH_LEN_SHIFT; + value |= (config->l3 & vpifregs[config_channel_id].len_mask); + regw(value, vpifregs[channel_id].v_cfg_00); + + value = (config->l5 & vpifregs[config_channel_id].len_mask); + value <<= VPIF_CH_LEN_SHIFT; + value |= (config->l7 & vpifregs[config_channel_id].len_mask); + regw(value, vpifregs[channel_id].v_cfg_01); + + value = (config->l9 & vpifregs[config_channel_id].len_mask); + value <<= VPIF_CH_LEN_SHIFT; + value |= (config->l11 & vpifregs[config_channel_id].len_mask); + regw(value, vpifregs[channel_id].v_cfg_02); + + value = (config->vsize & vpifregs[config_channel_id].len_mask); + regw(value, vpifregs[channel_id].v_cfg); +} + +/* config_vpif_params + * Function to set the parameters of a channel + * Mainly modifies the channel ciontrol register + * It sets frame format, yc mux mode + */ +static void config_vpif_params(struct vpif_params *vpifparams, + u8 channel_id, u8 found) +{ + const struct vpif_channel_config_params *config = &vpifparams->std_info; + u32 value, ch_nip, reg; + u8 start, end; + int i; + + start = channel_id; + end = channel_id + found; + + for (i = start; i < end; i++) { + reg = vpifregs[i].ch_ctrl; + if (channel_id < 2) + ch_nip = VPIF_CAPTURE_CH_NIP; + else + ch_nip = VPIF_DISPLAY_CH_NIP; + + vpif_wr_bit(reg, ch_nip, config->frm_fmt); + vpif_wr_bit(reg, VPIF_CH_YC_MUX_BIT, config->ycmux_mode); + vpif_wr_bit(reg, VPIF_CH_INPUT_FIELD_FRAME_BIT, + vpifparams->video_params.storage_mode); + + /* Set raster scanning SDR Format */ + vpif_clr_bit(reg, VPIF_CH_SDR_FMT_BIT); + vpif_wr_bit(reg, VPIF_CH_DATA_MODE_BIT, config->capture_format); + + if (channel_id > 1) /* Set the Pixel enable bit */ + vpif_set_bit(reg, VPIF_DISPLAY_PIX_EN_BIT); + else if (config->capture_format) { + /* Set the polarity of various pins */ + vpif_wr_bit(reg, VPIF_CH_FID_POLARITY_BIT, + vpifparams->iface.fid_pol); + vpif_wr_bit(reg, VPIF_CH_V_VALID_POLARITY_BIT, + vpifparams->iface.vd_pol); + vpif_wr_bit(reg, VPIF_CH_H_VALID_POLARITY_BIT, + vpifparams->iface.hd_pol); + + value = regr(reg); + /* Set data width */ + value &= ~(0x3u << + VPIF_CH_DATA_WIDTH_BIT); + value |= ((vpifparams->params.data_sz) << + VPIF_CH_DATA_WIDTH_BIT); + regw(value, reg); + } + + /* Write the pitch in the driver */ + regw((vpifparams->video_params.hpitch), + vpifregs[i].line_offset); + } +} + +/* vpif_set_video_params + * This function is used to set video parameters in VPIF register + */ +int vpif_set_video_params(struct vpif_params *vpifparams, u8 channel_id) +{ + const struct vpif_channel_config_params *config = &vpifparams->std_info; + int found = 1; + + vpif_set_mode_info(config, channel_id, channel_id); + if (!config->ycmux_mode) { + /* YC are on separate channels (HDTV formats) */ + vpif_set_mode_info(config, channel_id + 1, channel_id); + found = 2; + } + + config_vpif_params(vpifparams, channel_id, found); + + regw(0x80, VPIF_REQ_SIZE); + regw(0x01, VPIF_EMULATION_CTRL); + + return found; +} +EXPORT_SYMBOL(vpif_set_video_params); + +void vpif_set_vbi_display_params(struct vpif_vbi_params *vbiparams, + u8 channel_id) +{ + u32 value; + + value = 0x3F8 & (vbiparams->hstart0); + value |= 0x3FFFFFF & ((vbiparams->vstart0) << 16); + regw(value, vpifregs[channel_id].vanc0_strt); + + value = 0x3F8 & (vbiparams->hstart1); + value |= 0x3FFFFFF & ((vbiparams->vstart1) << 16); + regw(value, vpifregs[channel_id].vanc1_strt); + + value = 0x3F8 & (vbiparams->hsize0); + value |= 0x3FFFFFF & ((vbiparams->vsize0) << 16); + regw(value, vpifregs[channel_id].vanc0_size); + + value = 0x3F8 & (vbiparams->hsize1); + value |= 0x3FFFFFF & ((vbiparams->vsize1) << 16); + regw(value, vpifregs[channel_id].vanc1_size); + +} +EXPORT_SYMBOL(vpif_set_vbi_display_params); + +int vpif_channel_getfid(u8 channel_id) +{ + return (regr(vpifregs[channel_id].ch_ctrl) & VPIF_CH_FID_MASK) + >> VPIF_CH_FID_SHIFT; +} +EXPORT_SYMBOL(vpif_channel_getfid); + +static int __devinit vpif_probe(struct platform_device *pdev) +{ + int status = 0; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENOENT; + + res_len = resource_size(res); + + res = request_mem_region(res->start, res_len, res->name); + if (!res) + return -EBUSY; + + vpif_base = ioremap(res->start, res_len); + if (!vpif_base) { + status = -EBUSY; + goto fail; + } + + vpif_clk = clk_get(&pdev->dev, "vpif"); + if (IS_ERR(vpif_clk)) { + status = PTR_ERR(vpif_clk); + goto clk_fail; + } + clk_enable(vpif_clk); + + spin_lock_init(&vpif_lock); + dev_info(&pdev->dev, "vpif probe success\n"); + return 0; + +clk_fail: + iounmap(vpif_base); +fail: + release_mem_region(res->start, res_len); + return status; +} + +static int __devexit vpif_remove(struct platform_device *pdev) +{ + if (vpif_clk) { + clk_disable(vpif_clk); + clk_put(vpif_clk); + } + + iounmap(vpif_base); + release_mem_region(res->start, res_len); + return 0; +} + +#ifdef CONFIG_PM +static int vpif_suspend(struct device *dev) +{ + clk_disable(vpif_clk); + return 0; +} + +static int vpif_resume(struct device *dev) +{ + clk_enable(vpif_clk); + return 0; +} + +static const struct dev_pm_ops vpif_pm = { + .suspend = vpif_suspend, + .resume = vpif_resume, +}; + +#define vpif_pm_ops (&vpif_pm) +#else +#define vpif_pm_ops NULL +#endif + +static struct platform_driver vpif_driver = { + .driver = { + .name = "vpif", + .owner = THIS_MODULE, + .pm = vpif_pm_ops, + }, + .remove = __devexit_p(vpif_remove), + .probe = vpif_probe, +}; + +static void vpif_exit(void) +{ + platform_driver_unregister(&vpif_driver); +} + +static int __init vpif_init(void) +{ + return platform_driver_register(&vpif_driver); +} +subsys_initcall(vpif_init); +module_exit(vpif_exit); + |