1 files changed, 350 insertions, 67 deletions

diff --git a/drivers/media/video/adv7180.c b/drivers/media/video/adv7180.c
index b8b6c4b..174bffa 100644
--- a/drivers/media/video/adv7180.c
+++ b/drivers/media/video/adv7180.c
@@ -48,6 +48,7 @@
 #define ADV7180_INPUT_CONTROL_PAL_COMB_N_PED		0xd0
 #define ADV7180_INPUT_CONTROL_PAL_SECAM			0xe0
 #define ADV7180_INPUT_CONTROL_PAL_SECAM_PED		0xf0
+#define ADV7180_INPUT_CONTROL_INSEL_MASK		0x0f
 
 #define ADV7180_EXTENDED_OUTPUT_CONTROL_REG		0x04
 #define ADV7180_EXTENDED_OUTPUT_CONTROL_NTSCDIS		0xC5
@@ -55,9 +56,29 @@
 #define ADV7180_AUTODETECT_ENABLE_REG			0x07
 #define ADV7180_AUTODETECT_DEFAULT			0x7f
 
+#define ADV7180_CON_REG		0x08	/*Unsigned */
+#define CON_REG_MIN		0
+#define CON_REG_DEF		128
+#define CON_REG_MAX		255
+
+#define ADV7180_BRI_REG		0x0a	/*Signed */
+#define BRI_REG_MIN		-128
+#define BRI_REG_DEF		0
+#define BRI_REG_MAX		127
+
+#define ADV7180_HUE_REG		0x0b	/*Signed, inverted */
+#define HUE_REG_MIN		-127
+#define HUE_REG_DEF		0
+#define HUE_REG_MAX		128
+
 #define ADV7180_ADI_CTRL_REG				0x0e
 #define ADV7180_ADI_CTRL_IRQ_SPACE			0x20
 
+#define ADV7180_PWR_MAN_REG		0x0f
+#define ADV7180_PWR_MAN_ON		0x04
+#define ADV7180_PWR_MAN_OFF		0x24
+#define ADV7180_PWR_MAN_RES		0x80
+
 #define ADV7180_STATUS1_REG				0x10
 #define ADV7180_STATUS1_IN_LOCK		0x01
 #define ADV7180_STATUS1_AUTOD_MASK	0x70
@@ -78,6 +99,12 @@
 #define ADV7180_ICONF1_PSYNC_ONLY	0x10
 #define ADV7180_ICONF1_ACTIVE_TO_CLR	0xC0
 
+#define ADV7180_SD_SAT_CB_REG	0xe3	/*Unsigned */
+#define ADV7180_SD_SAT_CR_REG	0xe4	/*Unsigned */
+#define SAT_REG_MIN		0
+#define SAT_REG_DEF		128
+#define SAT_REG_MAX		255
+
 #define ADV7180_IRQ1_LOCK	0x01
 #define ADV7180_IRQ1_UNLOCK	0x02
 #define ADV7180_ISR1_ADI	0x42
@@ -90,6 +117,9 @@
 #define ADV7180_IMR3_ADI	0x4C
 #define ADV7180_IMR4_ADI	0x50
 
+#define ADV7180_NTSC_V_BIT_END_REG	0xE6
+#define ADV7180_NTSC_V_BIT_END_MANUAL_NVEND	0x4F
+
 struct adv7180_state {
 	struct v4l2_subdev	sd;
 	struct work_struct	work;
@@ -97,6 +127,11 @@ struct adv7180_state {
 	int			irq;
 	v4l2_std_id		curr_norm;
 	bool			autodetect;
+	s8			brightness;
+	s16			hue;
+	u8			contrast;
+	u8			saturation;
+	u8			input;
 };
 
 static v4l2_std_id adv7180_std_to_v4l2(u8 status1)
@@ -155,7 +190,7 @@ static u32 adv7180_status_to_v4l2(u8 status1)
 }
 
 static int __adv7180_status(struct i2c_client *client, u32 *status,
-	v4l2_std_id *std)
+			    v4l2_std_id *std)
 {
 	int status1 = i2c_smbus_read_byte_data(client, ADV7180_STATUS1_REG);
 
@@ -192,6 +227,36 @@ static int adv7180_querystd(struct v4l2_subdev *sd, v4l2_std_id *std)
 	return err;
 }
 
+static int adv7180_s_routing(struct v4l2_subdev *sd, u32 input,
+			     u32 output, u32 config)
+{
+	struct adv7180_state *state = to_state(sd);
+	int ret = mutex_lock_interruptible(&state->mutex);
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+
+	if (ret)
+		return ret;
+
+	/*We cannot discriminate between LQFP and 40-pin LFCSP, so accept
+	 * all inputs and let the card driver take care of validation
+	 */
+	if ((input & ADV7180_INPUT_CONTROL_INSEL_MASK) != input)
+		goto out;
+
+	ret = i2c_smbus_read_byte_data(client, ADV7180_INPUT_CONTROL_REG);
+
+	if (ret < 0)
+		goto out;
+
+	ret &= ~ADV7180_INPUT_CONTROL_INSEL_MASK;
+	ret = i2c_smbus_write_byte_data(client,
+					ADV7180_INPUT_CONTROL_REG, ret | input);
+	state->input = input;
+out:
+	mutex_unlock(&state->mutex);
+	return ret;
+}
+
 static int adv7180_g_input_status(struct v4l2_subdev *sd, u32 *status)
 {
 	struct adv7180_state *state = to_state(sd);
@@ -205,7 +270,7 @@ static int adv7180_g_input_status(struct v4l2_subdev *sd, u32 *status)
 }
 
 static int adv7180_g_chip_ident(struct v4l2_subdev *sd,
-	struct v4l2_dbg_chip_ident *chip)
+				struct v4l2_dbg_chip_ident *chip)
 {
 	struct i2c_client *client = v4l2_get_subdevdata(sd);
 
@@ -222,9 +287,10 @@ static int adv7180_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
 
 	/* all standards -> autodetect */
 	if (std == V4L2_STD_ALL) {
-		ret = i2c_smbus_write_byte_data(client,
-			ADV7180_INPUT_CONTROL_REG,
-			ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM);
+		ret =
+		    i2c_smbus_write_byte_data(client, ADV7180_INPUT_CONTROL_REG,
+				ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM
+					      | state->input);
 		if (ret < 0)
 			goto out;
 
@@ -236,7 +302,8 @@ static int adv7180_s_std(struct v4l2_subdev *sd, v4l2_std_id std)
 			goto out;
 
 		ret = i2c_smbus_write_byte_data(client,
-			ADV7180_INPUT_CONTROL_REG, ret);
+						ADV7180_INPUT_CONTROL_REG,
+						ret | state->input);
 		if (ret < 0)
 			goto out;
 
@@ -249,14 +316,138 @@ out:
 	return ret;
 }
 
+static int adv7180_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
+{
+	switch (qc->id) {
+	case V4L2_CID_BRIGHTNESS:
+		return v4l2_ctrl_query_fill(qc, BRI_REG_MIN, BRI_REG_MAX,
+					    1, BRI_REG_DEF);
+	case V4L2_CID_HUE:
+		return v4l2_ctrl_query_fill(qc, HUE_REG_MIN, HUE_REG_MAX,
+					    1, HUE_REG_DEF);
+	case V4L2_CID_CONTRAST:
+		return v4l2_ctrl_query_fill(qc, CON_REG_MIN, CON_REG_MAX,
+					    1, CON_REG_DEF);
+	case V4L2_CID_SATURATION:
+		return v4l2_ctrl_query_fill(qc, SAT_REG_MIN, SAT_REG_MAX,
+					    1, SAT_REG_DEF);
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static int adv7180_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+	struct adv7180_state *state = to_state(sd);
+	int ret = mutex_lock_interruptible(&state->mutex);
+	if (ret)
+		return ret;
+
+	switch (ctrl->id) {
+	case V4L2_CID_BRIGHTNESS:
+		ctrl->value = state->brightness;
+		break;
+	case V4L2_CID_HUE:
+		ctrl->value = state->hue;
+		break;
+	case V4L2_CID_CONTRAST:
+		ctrl->value = state->contrast;
+		break;
+	case V4L2_CID_SATURATION:
+		ctrl->value = state->saturation;
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	mutex_unlock(&state->mutex);
+	return ret;
+}
+
+static int adv7180_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+{
+	struct adv7180_state *state = to_state(sd);
+	struct i2c_client *client = v4l2_get_subdevdata(sd);
+	int ret = mutex_lock_interruptible(&state->mutex);
+	if (ret)
+		return ret;
+
+	switch (ctrl->id) {
+	case V4L2_CID_BRIGHTNESS:
+		if ((ctrl->value > BRI_REG_MAX)
+		    || (ctrl->value < BRI_REG_MIN)) {
+			ret = -ERANGE;
+			break;
+		}
+		state->brightness = ctrl->value;
+		ret = i2c_smbus_write_byte_data(client,
+						ADV7180_BRI_REG,
+						state->brightness);
+		break;
+	case V4L2_CID_HUE:
+		if ((ctrl->value > HUE_REG_MAX)
+		    || (ctrl->value < HUE_REG_MIN)) {
+			ret = -ERANGE;
+			break;
+		}
+		state->hue = ctrl->value;
+		/*Hue is inverted according to HSL chart */
+		ret = i2c_smbus_write_byte_data(client,
+						ADV7180_HUE_REG, -state->hue);
+		break;
+	case V4L2_CID_CONTRAST:
+		if ((ctrl->value > CON_REG_MAX)
+		    || (ctrl->value < CON_REG_MIN)) {
+			ret = -ERANGE;
+			break;
+		}
+		state->contrast = ctrl->value;
+		ret = i2c_smbus_write_byte_data(client,
+						ADV7180_CON_REG,
+						state->contrast);
+		break;
+	case V4L2_CID_SATURATION:
+		if ((ctrl->value > SAT_REG_MAX)
+		    || (ctrl->value < SAT_REG_MIN)) {
+			ret = -ERANGE;
+			break;
+		}
+		/*
+		 *This could be V4L2_CID_BLUE_BALANCE/V4L2_CID_RED_BALANCE
+		 *Let's not confuse the user, everybody understands saturation
+		 */
+		state->saturation = ctrl->value;
+		ret = i2c_smbus_write_byte_data(client,
+						ADV7180_SD_SAT_CB_REG,
+						state->saturation);
+		if (ret < 0)
+			break;
+		ret = i2c_smbus_write_byte_data(client,
+						ADV7180_SD_SAT_CR_REG,
+						state->saturation);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+
+	mutex_unlock(&state->mutex);
+	return ret;
+}
+
 static const struct v4l2_subdev_video_ops adv7180_video_ops = {
 	.querystd = adv7180_querystd,
 	.g_input_status = adv7180_g_input_status,
+	.s_routing = adv7180_s_routing,
 };
 
 static const struct v4l2_subdev_core_ops adv7180_core_ops = {
 	.g_chip_ident = adv7180_g_chip_ident,
 	.s_std = adv7180_s_std,
+	.queryctrl = adv7180_queryctrl,
+	.g_ctrl = adv7180_g_ctrl,
+	.s_ctrl = adv7180_s_ctrl,
 };
 
 static const struct v4l2_subdev_ops adv7180_ops = {
@@ -267,13 +458,13 @@ static const struct v4l2_subdev_ops adv7180_ops = {
 static void adv7180_work(struct work_struct *work)
 {
 	struct adv7180_state *state = container_of(work, struct adv7180_state,
-		work);
+						   work);
 	struct i2c_client *client = v4l2_get_subdevdata(&state->sd);
 	u8 isr3;
 
 	mutex_lock(&state->mutex);
 	i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG,
-		ADV7180_ADI_CTRL_IRQ_SPACE);
+				  ADV7180_ADI_CTRL_IRQ_SPACE);
 	isr3 = i2c_smbus_read_byte_data(client, ADV7180_ISR3_ADI);
 	/* clear */
 	i2c_smbus_write_byte_data(client, ADV7180_ICR3_ADI, isr3);
@@ -297,56 +488,51 @@ static irqreturn_t adv7180_irq(int irq, void *devid)
 	return IRQ_HANDLED;
 }
 
-/*
- * Generic i2c probe
- * concerning the addresses: i2c wants 7 bit (without the r/w bit), so '>>1'
- */
-
-static __devinit int adv7180_probe(struct i2c_client *client,
-			const struct i2c_device_id *id)
+static int init_device(struct i2c_client *client, struct adv7180_state *state)
 {
-	struct adv7180_state *state;
-	struct v4l2_subdev *sd;
 	int ret;
 
-	/* Check if the adapter supports the needed features */
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
-		return -EIO;
-
-	v4l_info(client, "chip found @ 0x%02x (%s)\n",
-			client->addr << 1, client->adapter->name);
-
-	state = kzalloc(sizeof(struct adv7180_state), GFP_KERNEL);
-	if (state == NULL) {
-		ret = -ENOMEM;
-		goto err;
-	}
-
-	state->irq = client->irq;
-	INIT_WORK(&state->work, adv7180_work);
-	mutex_init(&state->mutex);
-	state->autodetect = true;
-	sd = &state->sd;
-	v4l2_i2c_subdev_init(sd, client, &adv7180_ops);
-
 	/* Initialize adv7180 */
 	/* Enable autodetection */
-	ret = i2c_smbus_write_byte_data(client, ADV7180_INPUT_CONTROL_REG,
-		ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM);
-	if (ret < 0)
-		goto err_unreg_subdev;
+	if (state->autodetect) {
+		ret =
+		    i2c_smbus_write_byte_data(client, ADV7180_INPUT_CONTROL_REG,
+				ADV7180_INPUT_CONTROL_AD_PAL_BG_NTSC_J_SECAM
+					      | state->input);
+		if (ret < 0)
+			return ret;
 
-	ret = i2c_smbus_write_byte_data(client, ADV7180_AUTODETECT_ENABLE_REG,
-		ADV7180_AUTODETECT_DEFAULT);
-	if (ret < 0)
-		goto err_unreg_subdev;
+		ret =
+		    i2c_smbus_write_byte_data(client,
+					      ADV7180_AUTODETECT_ENABLE_REG,
+					      ADV7180_AUTODETECT_DEFAULT);
+		if (ret < 0)
+			return ret;
+	} else {
+		ret = v4l2_std_to_adv7180(state->curr_norm);
+		if (ret < 0)
+			return ret;
 
+		ret =
+		    i2c_smbus_write_byte_data(client, ADV7180_INPUT_CONTROL_REG,
+					      ret | state->input);
+		if (ret < 0)
+			return ret;
+
+	}
 	/* ITU-R BT.656-4 compatible */
 	ret = i2c_smbus_write_byte_data(client,
-		ADV7180_EXTENDED_OUTPUT_CONTROL_REG,
-		ADV7180_EXTENDED_OUTPUT_CONTROL_NTSCDIS);
+			ADV7180_EXTENDED_OUTPUT_CONTROL_REG,
+			ADV7180_EXTENDED_OUTPUT_CONTROL_NTSCDIS);
 	if (ret < 0)
-		goto err_unreg_subdev;
+		return ret;
+
+	/* Manually set V bit end position in NTSC mode */
+	ret = i2c_smbus_write_byte_data(client,
+					ADV7180_NTSC_V_BIT_END_REG,
+					ADV7180_NTSC_V_BIT_END_MANUAL_NVEND);
+	if (ret < 0)
+		return ret;
 
 	/* read current norm */
 	__adv7180_status(client, NULL, &state->curr_norm);
@@ -354,45 +540,109 @@ static __devinit int adv7180_probe(struct i2c_client *client,
 	/* register for interrupts */
 	if (state->irq > 0) {
 		ret = request_irq(state->irq, adv7180_irq, 0, DRIVER_NAME,
-			state);
+				  state);
 		if (ret)
-			goto err_unreg_subdev;
+			return ret;
 
 		ret = i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG,
-			ADV7180_ADI_CTRL_IRQ_SPACE);
+						ADV7180_ADI_CTRL_IRQ_SPACE);
 		if (ret < 0)
-			goto err_unreg_subdev;
+			return ret;
 
 		/* config the Interrupt pin to be active low */
 		ret = i2c_smbus_write_byte_data(client, ADV7180_ICONF1_ADI,
-			ADV7180_ICONF1_ACTIVE_LOW | ADV7180_ICONF1_PSYNC_ONLY);
+						ADV7180_ICONF1_ACTIVE_LOW |
+						ADV7180_ICONF1_PSYNC_ONLY);
 		if (ret < 0)
-			goto err_unreg_subdev;
+			return ret;
 
 		ret = i2c_smbus_write_byte_data(client, ADV7180_IMR1_ADI, 0);
 		if (ret < 0)
-			goto err_unreg_subdev;
+			return ret;
 
 		ret = i2c_smbus_write_byte_data(client, ADV7180_IMR2_ADI, 0);
 		if (ret < 0)
-			goto err_unreg_subdev;
+			return ret;
 
 		/* enable AD change interrupts interrupts */
 		ret = i2c_smbus_write_byte_data(client, ADV7180_IMR3_ADI,
-			ADV7180_IRQ3_AD_CHANGE);
+						ADV7180_IRQ3_AD_CHANGE);
 		if (ret < 0)
-			goto err_unreg_subdev;
+			return ret;
 
 		ret = i2c_smbus_write_byte_data(client, ADV7180_IMR4_ADI, 0);
 		if (ret < 0)
-			goto err_unreg_subdev;
+			return ret;
 
 		ret = i2c_smbus_write_byte_data(client, ADV7180_ADI_CTRL_REG,
-			0);
+						0);
 		if (ret < 0)
-			goto err_unreg_subdev;
+			return ret;
 	}
 
+	/*Set default value for controls */
+	ret = i2c_smbus_write_byte_data(client, ADV7180_BRI_REG,
+					state->brightness);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_write_byte_data(client, ADV7180_HUE_REG, state->hue);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_write_byte_data(client, ADV7180_CON_REG,
+					state->contrast);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_write_byte_data(client, ADV7180_SD_SAT_CB_REG,
+					state->saturation);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_smbus_write_byte_data(client, ADV7180_SD_SAT_CR_REG,
+					state->saturation);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static __devinit int adv7180_probe(struct i2c_client *client,
+				   const struct i2c_device_id *id)
+{
+	struct adv7180_state *state;
+	struct v4l2_subdev *sd;
+	int ret;
+
+	/* Check if the adapter supports the needed features */
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		return -EIO;
+
+	v4l_info(client, "chip found @ 0x%02x (%s)\n",
+		 client->addr, client->adapter->name);
+
+	state = kzalloc(sizeof(struct adv7180_state), GFP_KERNEL);
+	if (state == NULL) {
+		ret = -ENOMEM;
+		goto err;
+	}
+
+	state->irq = client->irq;
+	INIT_WORK(&state->work, adv7180_work);
+	mutex_init(&state->mutex);
+	state->autodetect = true;
+	state->brightness = BRI_REG_DEF;
+	state->hue = HUE_REG_DEF;
+	state->contrast = CON_REG_DEF;
+	state->saturation = SAT_REG_DEF;
+	state->input = 0;
+	sd = &state->sd;
+	v4l2_i2c_subdev_init(sd, client, &adv7180_ops);
+
+	ret = init_device(client, state);
+	if (0 != ret)
+		goto err_unreg_subdev;
 	return 0;
 
 err_unreg_subdev:
@@ -432,16 +682,49 @@ static const struct i2c_device_id adv7180_id[] = {
 	{},
 };
 
+#ifdef CONFIG_PM
+static int adv7180_suspend(struct i2c_client *client, pm_message_t state)
+{
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, ADV7180_PWR_MAN_REG,
+					ADV7180_PWR_MAN_OFF);
+	if (ret < 0)
+		return ret;
+	return 0;
+}
+
+static int adv7180_resume(struct i2c_client *client)
+{
+	struct v4l2_subdev *sd = i2c_get_clientdata(client);
+	struct adv7180_state *state = to_state(sd);
+	int ret;
+
+	ret = i2c_smbus_write_byte_data(client, ADV7180_PWR_MAN_REG,
+					ADV7180_PWR_MAN_ON);
+	if (ret < 0)
+		return ret;
+	ret = init_device(client, state);
+	if (ret < 0)
+		return ret;
+	return 0;
+}
+#endif
+
 MODULE_DEVICE_TABLE(i2c, adv7180_id);
 
 static struct i2c_driver adv7180_driver = {
 	.driver = {
-		.owner	= THIS_MODULE,
-		.name	= DRIVER_NAME,
-	},
-	.probe		= adv7180_probe,
-	.remove		= __devexit_p(adv7180_remove),
-	.id_table	= adv7180_id,
+		   .owner = THIS_MODULE,
+		   .name = DRIVER_NAME,
+		   },
+	.probe = adv7180_probe,
+	.remove = __devexit_p(adv7180_remove),
+#ifdef CONFIG_PM
+	.suspend = adv7180_suspend,
+	.resume = adv7180_resume,
+#endif
+	.id_table = adv7180_id,
 };
 
 module_i2c_driver(adv7180_driver);