diff options
Diffstat (limited to 'drivers/media/video/gspca/stv06xx/stv06xx_hdcs.h')
| -rw-r--r-- | drivers/media/video/gspca/stv06xx/stv06xx_hdcs.h | 206 |
1 files changed, 0 insertions, 206 deletions
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.h b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.h deleted file mode 100644 index 1ba9158..0000000 --- a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.h +++ /dev/null @@ -1,206 +0,0 @@ -/* - * Copyright (c) 2001 Jean-Fredric Clere, Nikolas Zimmermann, Georg Acher - * Mark Cave-Ayland, Carlo E Prelz, Dick Streefland - * Copyright (c) 2002, 2003 Tuukka Toivonen - * Copyright (c) 2008 Erik Andrén - * Copyright (c) 2008 Chia-I Wu - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * P/N 861037: Sensor HDCS1000 ASIC STV0600 - * P/N 861050-0010: Sensor HDCS1000 ASIC STV0600 - * P/N 861050-0020: Sensor Photobit PB100 ASIC STV0600-1 - QuickCam Express - * P/N 861055: Sensor ST VV6410 ASIC STV0610 - LEGO cam - * P/N 861075-0040: Sensor HDCS1000 ASIC - * P/N 961179-0700: Sensor ST VV6410 ASIC STV0602 - Dexxa WebCam USB - * P/N 861040-0000: Sensor ST VV6410 ASIC STV0610 - QuickCam Web - */ - -#ifndef STV06XX_HDCS_H_ -#define STV06XX_HDCS_H_ - -#include "stv06xx_sensor.h" - -#define HDCS_REG_CONFIG(sd) (IS_1020(sd) ? HDCS20_CONFIG : HDCS00_CONFIG) -#define HDCS_REG_CONTROL(sd) (IS_1020(sd) ? HDCS20_CONTROL : HDCS00_CONTROL) - -#define HDCS_1X00_DEF_WIDTH 360 -#define HDCS_1X00_DEF_HEIGHT 296 - -#define HDCS_1020_DEF_WIDTH 352 -#define HDCS_1020_DEF_HEIGHT 292 - -#define HDCS_1020_BOTTOM_Y_SKIP 4 - -#define HDCS_CLK_FREQ_MHZ 25 - -#define HDCS_ADC_START_SIG_DUR 3 - -/* LSB bit of I2C or register address signifies write (0) or read (1) */ -/* I2C Registers common for both HDCS-1000/1100 and HDCS-1020 */ -/* Identifications Register */ -#define HDCS_IDENT (0x00 << 1) -/* Status Register */ -#define HDCS_STATUS (0x01 << 1) -/* Interrupt Mask Register */ -#define HDCS_IMASK (0x02 << 1) -/* Pad Control Register */ -#define HDCS_PCTRL (0x03 << 1) -/* Pad Drive Control Register */ -#define HDCS_PDRV (0x04 << 1) -/* Interface Control Register */ -#define HDCS_ICTRL (0x05 << 1) -/* Interface Timing Register */ -#define HDCS_ITMG (0x06 << 1) -/* Baud Fraction Register */ -#define HDCS_BFRAC (0x07 << 1) -/* Baud Rate Register */ -#define HDCS_BRATE (0x08 << 1) -/* ADC Control Register */ -#define HDCS_ADCCTRL (0x09 << 1) -/* First Window Row Register */ -#define HDCS_FWROW (0x0a << 1) -/* First Window Column Register */ -#define HDCS_FWCOL (0x0b << 1) -/* Last Window Row Register */ -#define HDCS_LWROW (0x0c << 1) -/* Last Window Column Register */ -#define HDCS_LWCOL (0x0d << 1) -/* Timing Control Register */ -#define HDCS_TCTRL (0x0e << 1) -/* PGA Gain Register: Even Row, Even Column */ -#define HDCS_ERECPGA (0x0f << 1) -/* PGA Gain Register: Even Row, Odd Column */ -#define HDCS_EROCPGA (0x10 << 1) -/* PGA Gain Register: Odd Row, Even Column */ -#define HDCS_ORECPGA (0x11 << 1) -/* PGA Gain Register: Odd Row, Odd Column */ -#define HDCS_OROCPGA (0x12 << 1) -/* Row Exposure Low Register */ -#define HDCS_ROWEXPL (0x13 << 1) -/* Row Exposure High Register */ -#define HDCS_ROWEXPH (0x14 << 1) - -/* I2C Registers only for HDCS-1000/1100 */ -/* Sub-Row Exposure Low Register */ -#define HDCS00_SROWEXPL (0x15 << 1) -/* Sub-Row Exposure High Register */ -#define HDCS00_SROWEXPH (0x16 << 1) -/* Configuration Register */ -#define HDCS00_CONFIG (0x17 << 1) -/* Control Register */ -#define HDCS00_CONTROL (0x18 << 1) - -/* I2C Registers only for HDCS-1020 */ -/* Sub-Row Exposure Register */ -#define HDCS20_SROWEXP (0x15 << 1) -/* Error Control Register */ -#define HDCS20_ERROR (0x16 << 1) -/* Interface Timing 2 Register */ -#define HDCS20_ITMG2 (0x17 << 1) -/* Interface Control 2 Register */ -#define HDCS20_ICTRL2 (0x18 << 1) -/* Horizontal Blank Register */ -#define HDCS20_HBLANK (0x19 << 1) -/* Vertical Blank Register */ -#define HDCS20_VBLANK (0x1a << 1) -/* Configuration Register */ -#define HDCS20_CONFIG (0x1b << 1) -/* Control Register */ -#define HDCS20_CONTROL (0x1c << 1) - -#define HDCS_RUN_ENABLE (1 << 2) -#define HDCS_SLEEP_MODE (1 << 1) - -#define HDCS_DEFAULT_EXPOSURE 48 -#define HDCS_DEFAULT_GAIN 50 - -static int hdcs_probe_1x00(struct sd *sd); -static int hdcs_probe_1020(struct sd *sd); -static int hdcs_start(struct sd *sd); -static int hdcs_init(struct sd *sd); -static int hdcs_init_controls(struct sd *sd); -static int hdcs_stop(struct sd *sd); -static int hdcs_dump(struct sd *sd); - -static int hdcs_set_exposure(struct gspca_dev *gspca_dev, __s32 val); -static int hdcs_set_gain(struct gspca_dev *gspca_dev, __s32 val); - -const struct stv06xx_sensor stv06xx_sensor_hdcs1x00 = { - .name = "HP HDCS-1000/1100", - .i2c_flush = 0, - .i2c_addr = (0x55 << 1), - .i2c_len = 1, - - /* FIXME (see if we can lower min_packet_size, needs testing, and also - adjusting framerate when the bandwidth gets lower) */ - .min_packet_size = { 847 }, - .max_packet_size = { 847 }, - - .init = hdcs_init, - .init_controls = hdcs_init_controls, - .probe = hdcs_probe_1x00, - .start = hdcs_start, - .stop = hdcs_stop, - .dump = hdcs_dump, -}; - -const struct stv06xx_sensor stv06xx_sensor_hdcs1020 = { - .name = "HDCS-1020", - .i2c_flush = 0, - .i2c_addr = (0x55 << 1), - .i2c_len = 1, - - /* FIXME (see if we can lower min_packet_size, needs testing, and also - adjusting framerate when the bandwidthm gets lower) */ - .min_packet_size = { 847 }, - .max_packet_size = { 847 }, - - .init = hdcs_init, - .init_controls = hdcs_init_controls, - .probe = hdcs_probe_1020, - .start = hdcs_start, - .stop = hdcs_stop, - .dump = hdcs_dump, -}; - -static const u16 stv_bridge_init[][2] = { - {STV_ISO_ENABLE, 0}, - {STV_REG23, 0}, - {STV_REG00, 0x1d}, - {STV_REG01, 0xb5}, - {STV_REG02, 0xa8}, - {STV_REG03, 0x95}, - {STV_REG04, 0x07}, - - {STV_SCAN_RATE, 0x20}, - {STV_Y_CTRL, 0x01}, - {STV_X_CTRL, 0x0a} -}; - -static const u8 stv_sensor_init[][2] = { - /* Clear status (writing 1 will clear the corresponding status bit) */ - {HDCS_STATUS, BIT(6) | BIT(5) | BIT(4) | BIT(3) | BIT(2) | BIT(1)}, - /* Disable all interrupts */ - {HDCS_IMASK, 0x00}, - {HDCS_PCTRL, BIT(6) | BIT(5) | BIT(1) | BIT(0)}, - {HDCS_PDRV, 0x00}, - {HDCS_ICTRL, BIT(5)}, - {HDCS_ITMG, BIT(4) | BIT(1)}, - /* ADC output resolution to 10 bits */ - {HDCS_ADCCTRL, 10} -}; - -#endif |