diff options
Diffstat (limited to 'drivers/media')
-rw-r--r-- | drivers/media/video/gspca/sonixb.c | 100 |
1 files changed, 93 insertions, 7 deletions
diff --git a/drivers/media/video/gspca/sonixb.c b/drivers/media/video/gspca/sonixb.c index a512772..51435e3 100644 --- a/drivers/media/video/gspca/sonixb.c +++ b/drivers/media/video/gspca/sonixb.c @@ -44,6 +44,7 @@ struct sd { unsigned char brightness; unsigned char autogain; unsigned char autogain_ignore_frames; + unsigned char freq; /* light freq filter setting */ unsigned char fr_h_sz; /* size of frame header */ char sensor; /* Type of image sensor chip */ @@ -85,6 +86,8 @@ static int sd_setexposure(struct gspca_dev *gspca_dev, __s32 val); static int sd_getexposure(struct gspca_dev *gspca_dev, __s32 *val); static int sd_setautogain(struct gspca_dev *gspca_dev, __s32 val); static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val); +static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val); +static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val); static struct ctrl sd_ctrls[] = { { @@ -147,6 +150,20 @@ static struct ctrl sd_ctrls[] = { .set = sd_setautogain, .get = sd_getautogain, }, + { + { + .id = V4L2_CID_POWER_LINE_FREQUENCY, + .type = V4L2_CTRL_TYPE_MENU, + .name = "Light frequency filter", + .minimum = 0, + .maximum = 2, /* 0: 0, 1: 50Hz, 2:60Hz */ + .step = 1, +#define FREQ_DEF 1 + .default_value = FREQ_DEF, + }, + .set = sd_setfreq, + .get = sd_getfreq, + }, }; static struct v4l2_pix_format vga_mode[] = { @@ -225,11 +242,6 @@ static const __u8 ov6650_sensor_init[][8] = /* Some more unknown stuff */ {0xa0, 0x60, 0x68, 0x04, 0x68, 0xd8, 0xa4, 0x10}, {0xd0, 0x60, 0x17, 0x24, 0xd6, 0x04, 0x94, 0x10}, /* Clipreg */ - {0xa0, 0x60, 0x10, 0x57, 0x99, 0x04, 0x94, 0x16}, - /* Framerate adjust register for artificial light 50 hz flicker - compensation, identical to ov6630 0x2b register, see 6630 datasheet. - 0x4f -> (30 fps -> 25 fps), 0x00 -> no adjustment */ - {0xa0, 0x60, 0x2b, 0x4f, 0x99, 0x04, 0x94, 0x15}, }; static const __u8 initOv7630[] = { @@ -657,8 +669,12 @@ static void setexposure(struct gspca_dev *gspca_dev) */ __u8 i2c[] = {0xb0, 0x60, 0x10, 0x00, 0xc0, 0x00, 0x00, 0x10}; int reg10, reg11; - /* No clear idea why, but setting reg10 above this value - results in no change */ + /* ov6645 datasheet says reg10_max is 9a, but that uses + tline * 2 * reg10 as formula for calculating texpo, the + ov6650 probably uses the same formula as the 7730 which uses + tline * 4 * reg10, which explains why the reg10max we've + found experimentally for the ov6650 is exactly half that of + the ov6645. */ const int reg10_max = 0x4d; reg11 = (60 * sd->exposure + 999) / 1000; @@ -713,6 +729,34 @@ static void setexposure(struct gspca_dev *gspca_dev) } } +static void setfreq(struct gspca_dev *gspca_dev) +{ + struct sd *sd = (struct sd *) gspca_dev; + + switch (sd->sensor) { + case SENSOR_OV6650: { + /* Framerate adjust register for artificial light 50 hz flicker + compensation, identical to ov6630 0x2b register, see ov6630 + datasheet. + 0x4f -> (30 fps -> 25 fps), 0x00 -> no adjustment */ + __u8 i2c[] = {0xa0, 0x60, 0x2b, 0x00, 0x00, 0x00, 0x00, 0x10}; + switch (sd->freq) { + default: +/* case 0: * no filter*/ +/* case 2: * 60 hz */ + i2c[3] = 0; + break; + case 1: /* 50 hz */ + i2c[3] = 0x4f; + break; + } + if (i2c_w(gspca_dev, i2c) < 0) + PDEBUG(D_ERR, "i2c error setfreq"); + break; + } + } +} + static void do_autogain(struct gspca_dev *gspca_dev) { @@ -746,6 +790,7 @@ static int sd_config(struct gspca_dev *gspca_dev, sd->fr_h_sz = 12; /* default size of the frame header */ sd->sd_desc.nctrls = 2; /* default nb of ctrls */ sd->autogain = AUTOGAIN_DEF; /* default is autogain active */ + sd->freq = FREQ_DEF; product = id->idProduct; /* switch (id->idVendor) { */ @@ -1004,6 +1049,7 @@ static void sd_start(struct gspca_dev *gspca_dev) setgain(gspca_dev); setbrightness(gspca_dev); setexposure(gspca_dev); + setfreq(gspca_dev); sd->autogain_ignore_frames = 0; atomic_set(&sd->avg_lum, -1); @@ -1161,6 +1207,45 @@ static int sd_getautogain(struct gspca_dev *gspca_dev, __s32 *val) return 0; } +static int sd_setfreq(struct gspca_dev *gspca_dev, __s32 val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + sd->freq = val; + if (gspca_dev->streaming) + setfreq(gspca_dev); + return 0; +} + +static int sd_getfreq(struct gspca_dev *gspca_dev, __s32 *val) +{ + struct sd *sd = (struct sd *) gspca_dev; + + *val = sd->freq; + return 0; +} + +static int sd_querymenu(struct gspca_dev *gspca_dev, + struct v4l2_querymenu *menu) +{ + switch (menu->id) { + case V4L2_CID_POWER_LINE_FREQUENCY: + switch (menu->index) { + case 0: /* V4L2_CID_POWER_LINE_FREQUENCY_DISABLED */ + strcpy((char *) menu->name, "NoFliker"); + return 0; + case 1: /* V4L2_CID_POWER_LINE_FREQUENCY_50HZ */ + strcpy((char *) menu->name, "50 Hz"); + return 0; + case 2: /* V4L2_CID_POWER_LINE_FREQUENCY_60HZ */ + strcpy((char *) menu->name, "60 Hz"); + return 0; + } + break; + } + return -EINVAL; +} + /* sub-driver description */ static const struct sd_desc sd_desc = { .name = MODULE_NAME, @@ -1173,6 +1258,7 @@ static const struct sd_desc sd_desc = { .stop0 = sd_stop0, .close = sd_close, .pkt_scan = sd_pkt_scan, + .querymenu = sd_querymenu, }; /* -- module initialisation -- */ |