diff options
Diffstat (limited to 'drivers/mfd/88pm805.c')
| -rw-r--r-- | drivers/mfd/88pm805.c | 301 |
1 files changed, 301 insertions, 0 deletions
diff --git a/drivers/mfd/88pm805.c b/drivers/mfd/88pm805.c new file mode 100644 index 0000000..6146583 --- /dev/null +++ b/drivers/mfd/88pm805.c @@ -0,0 +1,301 @@ +/* + * Base driver for Marvell 88PM805 + * + * Copyright (C) 2012 Marvell International Ltd. + * Haojian Zhuang <haojian.zhuang@marvell.com> + * Joseph(Yossi) Hanin <yhanin@marvell.com> + * Qiao Zhou <zhouqiao@marvell.com> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file "COPYING" in the main directory of this + * archive for more details. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/irq.h> +#include <linux/mfd/core.h> +#include <linux/mfd/88pm80x.h> +#include <linux/slab.h> +#include <linux/delay.h> + +#define PM805_CHIP_ID (0x00) + +static const struct i2c_device_id pm80x_id_table[] = { + {"88PM805", CHIP_PM805}, + {} /* NULL terminated */ +}; +MODULE_DEVICE_TABLE(i2c, pm80x_id_table); + +/* Interrupt Number in 88PM805 */ +enum { + PM805_IRQ_LDO_OFF, /*0 */ + PM805_IRQ_SRC_DPLL_LOCK, /*1 */ + PM805_IRQ_CLIP_FAULT, + PM805_IRQ_MIC_CONFLICT, + PM805_IRQ_HP2_SHRT, + PM805_IRQ_HP1_SHRT, /*5 */ + PM805_IRQ_FINE_PLL_FAULT, + PM805_IRQ_RAW_PLL_FAULT, + PM805_IRQ_VOLP_BTN_DET, + PM805_IRQ_VOLM_BTN_DET, + PM805_IRQ_SHRT_BTN_DET, /*10 */ + PM805_IRQ_MIC_DET, /*11 */ + + PM805_MAX_IRQ, +}; + +static struct resource codec_resources[] = { + { + /* Headset microphone insertion or removal */ + .name = "micin", + .start = PM805_IRQ_MIC_DET, + .end = PM805_IRQ_MIC_DET, + .flags = IORESOURCE_IRQ, + }, + { + /* Audio short HP1 */ + .name = "audio-short1", + .start = PM805_IRQ_HP1_SHRT, + .end = PM805_IRQ_HP1_SHRT, + .flags = IORESOURCE_IRQ, + }, + { + /* Audio short HP2 */ + .name = "audio-short2", + .start = PM805_IRQ_HP2_SHRT, + .end = PM805_IRQ_HP2_SHRT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mfd_cell codec_devs[] = { + { + .name = "88pm80x-codec", + .num_resources = ARRAY_SIZE(codec_resources), + .resources = &codec_resources[0], + .id = -1, + }, +}; + +static struct regmap_irq pm805_irqs[] = { + /* INT0 */ + [PM805_IRQ_LDO_OFF] = { + .mask = PM805_INT1_HP1_SHRT, + }, + [PM805_IRQ_SRC_DPLL_LOCK] = { + .mask = PM805_INT1_HP2_SHRT, + }, + [PM805_IRQ_CLIP_FAULT] = { + .mask = PM805_INT1_MIC_CONFLICT, + }, + [PM805_IRQ_MIC_CONFLICT] = { + .mask = PM805_INT1_CLIP_FAULT, + }, + [PM805_IRQ_HP2_SHRT] = { + .mask = PM805_INT1_LDO_OFF, + }, + [PM805_IRQ_HP1_SHRT] = { + .mask = PM805_INT1_SRC_DPLL_LOCK, + }, + /* INT1 */ + [PM805_IRQ_FINE_PLL_FAULT] = { + .reg_offset = 1, + .mask = PM805_INT2_MIC_DET, + }, + [PM805_IRQ_RAW_PLL_FAULT] = { + .reg_offset = 1, + .mask = PM805_INT2_SHRT_BTN_DET, + }, + [PM805_IRQ_VOLP_BTN_DET] = { + .reg_offset = 1, + .mask = PM805_INT2_VOLM_BTN_DET, + }, + [PM805_IRQ_VOLM_BTN_DET] = { + .reg_offset = 1, + .mask = PM805_INT2_VOLP_BTN_DET, + }, + [PM805_IRQ_SHRT_BTN_DET] = { + .reg_offset = 1, + .mask = PM805_INT2_RAW_PLL_FAULT, + }, + [PM805_IRQ_MIC_DET] = { + .reg_offset = 1, + .mask = PM805_INT2_FINE_PLL_FAULT, + }, +}; + +static int __devinit device_irq_init_805(struct pm80x_chip *chip) +{ + struct regmap *map = chip->regmap; + unsigned long flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT; + int data, mask, ret = -EINVAL; + + if (!map || !chip->irq) { + dev_err(chip->dev, "incorrect parameters\n"); + return -EINVAL; + } + + /* + * irq_mode defines the way of clearing interrupt. it's read-clear by + * default. + */ + mask = + PM805_STATUS0_INT_CLEAR | PM805_STATUS0_INV_INT | + PM800_STATUS0_INT_MASK; + + data = PM805_STATUS0_INT_CLEAR; + ret = regmap_update_bits(map, PM805_INT_STATUS0, mask, data); + /* + * PM805_INT_STATUS is under 32K clock domain, so need to + * add proper delay before the next I2C register access. + */ + msleep(1); + + if (ret < 0) + goto out; + + ret = + regmap_add_irq_chip(chip->regmap, chip->irq, flags, -1, + chip->regmap_irq_chip, &chip->irq_data); + +out: + return ret; +} + +static void device_irq_exit_805(struct pm80x_chip *chip) +{ + regmap_del_irq_chip(chip->irq, chip->irq_data); +} + +static struct regmap_irq_chip pm805_irq_chip = { + .name = "88pm805", + .irqs = pm805_irqs, + .num_irqs = ARRAY_SIZE(pm805_irqs), + + .num_regs = 2, + .status_base = PM805_INT_STATUS1, + .mask_base = PM805_INT_MASK1, + .ack_base = PM805_INT_STATUS1, +}; + +static int __devinit device_805_init(struct pm80x_chip *chip) +{ + int ret = 0; + unsigned int val; + struct regmap *map = chip->regmap; + + if (!map) { + dev_err(chip->dev, "regmap is invalid\n"); + return -EINVAL; + } + + ret = regmap_read(map, PM805_CHIP_ID, &val); + if (ret < 0) { + dev_err(chip->dev, "Failed to read CHIP ID: %d\n", ret); + goto out_irq_init; + } + chip->version = val; + + chip->regmap_irq_chip = &pm805_irq_chip; + + ret = device_irq_init_805(chip); + if (ret < 0) { + dev_err(chip->dev, "Failed to init pm805 irq!\n"); + goto out_irq_init; + } + + ret = mfd_add_devices(chip->dev, 0, &codec_devs[0], + ARRAY_SIZE(codec_devs), &codec_resources[0], 0); + if (ret < 0) { + dev_err(chip->dev, "Failed to add codec subdev\n"); + goto out_codec; + } else + dev_info(chip->dev, "[%s]:Added mfd codec_devs\n", __func__); + + return 0; + +out_codec: + device_irq_exit_805(chip); +out_irq_init: + return ret; +} + +static int __devinit pm805_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret = 0; + struct pm80x_chip *chip; + struct pm80x_platform_data *pdata = client->dev.platform_data; + + ret = pm80x_init(client, id); + if (ret) { + dev_err(&client->dev, "pm805_init fail!\n"); + goto out_init; + } + + chip = i2c_get_clientdata(client); + + ret = device_805_init(chip); + if (ret) { + dev_err(chip->dev, "%s id 0x%x failed!\n", __func__, chip->id); + goto err_805_init; + } + + if (pdata->plat_config) + pdata->plat_config(chip, pdata); + +err_805_init: + pm80x_deinit(client); +out_init: + return ret; +} + +static int __devexit pm805_remove(struct i2c_client *client) +{ + struct pm80x_chip *chip = i2c_get_clientdata(client); + + mfd_remove_devices(chip->dev); + device_irq_exit_805(chip); + + pm80x_deinit(client); + + return 0; +} + +static struct i2c_driver pm805_driver = { + .driver = { + .name = "88PM80X", + .owner = THIS_MODULE, + .pm = &pm80x_pm_ops, + }, + .probe = pm805_probe, + .remove = __devexit_p(pm805_remove), + .id_table = pm80x_id_table, +}; + +static int __init pm805_i2c_init(void) +{ + return i2c_add_driver(&pm805_driver); +} +subsys_initcall(pm805_i2c_init); + +static void __exit pm805_i2c_exit(void) +{ + i2c_del_driver(&pm805_driver); +} +module_exit(pm805_i2c_exit); + +MODULE_DESCRIPTION("PMIC Driver for Marvell 88PM805"); +MODULE_AUTHOR("Qiao Zhou <zhouqiao@marvell.com>"); +MODULE_LICENSE("GPL"); |