diff options
Diffstat (limited to 'drivers/mfd/Kconfig')
| -rw-r--r-- | drivers/mfd/Kconfig | 72 |
1 files changed, 38 insertions, 34 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index ff553ba..671f5b1 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -65,7 +65,7 @@ config MFD_SM501_GPIO config MFD_RTSX_PCI tristate "Support for Realtek PCI-E card reader" - depends on PCI + depends on PCI && GENERIC_HARDIRQS select MFD_CORE help This supports for Realtek PCI-Express card reader including rts5209, @@ -95,7 +95,7 @@ config MFD_DM355EVM_MSP config MFD_TI_SSP tristate "TI Sequencer Serial Port support" - depends on ARCH_DAVINCI_TNETV107X + depends on ARCH_DAVINCI_TNETV107X && GENERIC_HARDIRQS select MFD_CORE ---help--- Say Y here if you want support for the Sequencer Serial Port @@ -109,6 +109,7 @@ config MFD_TI_AM335X_TSCADC select MFD_CORE select REGMAP select REGMAP_MMIO + depends on GENERIC_HARDIRQS help If you say yes here you get support for Texas Instruments series of Touch Screen /ADC chips. @@ -126,6 +127,7 @@ config HTC_EGPIO config HTC_PASIC3 tristate "HTC PASIC3 LED/DS1WM chip support" select MFD_CORE + depends on GENERIC_HARDIRQS help This core driver provides register access for the LED/DS1WM chips labeled "AIC2" and "AIC3", found on HTC Blueangel and @@ -157,6 +159,7 @@ config MFD_LM3533 depends on I2C select MFD_CORE select REGMAP_I2C + depends on GENERIC_HARDIRQS help Say yes here to enable support for National Semiconductor / TI LM3533 Lighting Power chips. @@ -171,6 +174,7 @@ config TPS6105X select REGULATOR select MFD_CORE select REGULATOR_FIXED_VOLTAGE + depends on GENERIC_HARDIRQS help This option enables a driver for the TP61050/TPS61052 high-power "white LED driver". This boost converter is @@ -193,7 +197,7 @@ config TPS65010 config TPS6507X tristate "TPS6507x Power Management / Touch Screen chips" select MFD_CORE - depends on I2C + depends on I2C && GENERIC_HARDIRQS help If you say yes here you get support for the TPS6507x series of Power Management / Touch Screen chips. These include voltage @@ -204,7 +208,7 @@ config TPS6507X config MFD_TPS65217 tristate "TPS65217 Power Management / White LED chips" - depends on I2C + depends on I2C && GENERIC_HARDIRQS select MFD_CORE select REGMAP_I2C help @@ -234,7 +238,7 @@ config MFD_TPS6586X config MFD_TPS65910 bool "TPS65910 Power Management chip" - depends on I2C=y && GPIOLIB + depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS select MFD_CORE select REGMAP_I2C select REGMAP_IRQ @@ -251,7 +255,7 @@ config MFD_TPS65912_I2C bool "TPS65912 Power Management chip with I2C" select MFD_CORE select MFD_TPS65912 - depends on I2C=y && GPIOLIB + depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS help If you say yes here you get support for the TPS65912 series of PM chips with I2C interface. @@ -260,7 +264,7 @@ config MFD_TPS65912_SPI bool "TPS65912 Power Management chip with SPI" select MFD_CORE select MFD_TPS65912 - depends on SPI_MASTER && GPIOLIB + depends on SPI_MASTER && GPIOLIB && GENERIC_HARDIRQS help If you say yes here you get support for the TPS65912 series of PM chips with SPI interface. @@ -330,13 +334,13 @@ config TWL4030_POWER config MFD_TWL4030_AUDIO bool - depends on TWL4030_CORE + depends on TWL4030_CORE && GENERIC_HARDIRQS select MFD_CORE default n config TWL6040_CORE bool "Support for TWL6040 audio codec" - depends on I2C=y + depends on I2C=y && GENERIC_HARDIRQS select MFD_CORE select REGMAP_I2C select REGMAP_IRQ @@ -405,7 +409,7 @@ config MFD_TMIO config MFD_T7L66XB bool "Support Toshiba T7L66XB" - depends on ARM && HAVE_CLK + depends on ARM && HAVE_CLK && GENERIC_HARDIRQS select MFD_CORE select MFD_TMIO help @@ -413,7 +417,7 @@ config MFD_T7L66XB config MFD_SMSC bool "Support for the SMSC ECE1099 series chips" - depends on I2C=y + depends on I2C=y && GENERIC_HARDIRQS select MFD_CORE select REGMAP_I2C help @@ -460,7 +464,7 @@ config MFD_DA9052_SPI select REGMAP_SPI select REGMAP_IRQ select PMIC_DA9052 - depends on SPI_MASTER=y + depends on SPI_MASTER=y && GENERIC_HARDIRQS help Support for the Dialog Semiconductor DA9052 PMIC when controlled using SPI. This driver provides common support @@ -472,7 +476,7 @@ config MFD_DA9052_I2C select REGMAP_I2C select REGMAP_IRQ select PMIC_DA9052 - depends on I2C=y + depends on I2C=y && GENERIC_HARDIRQS help Support for the Dialog Semiconductor DA9052 PMIC when controlled using I2C. This driver provides common support @@ -485,7 +489,7 @@ config MFD_DA9055 select REGMAP_IRQ select PMIC_DA9055 select MFD_CORE - depends on I2C=y + depends on I2C=y && GENERIC_HARDIRQS help Say yes here for support of Dialog Semiconductor DA9055. This is a Power Management IC. This driver provides common support for @@ -508,7 +512,7 @@ config PMIC_ADP5520 config MFD_LP8788 bool "Texas Instruments LP8788 Power Management Unit Driver" - depends on I2C=y + depends on I2C=y && GENERIC_HARDIRQS select MFD_CORE select REGMAP_I2C select IRQ_DOMAIN @@ -611,7 +615,7 @@ config MFD_ARIZONA_I2C select MFD_ARIZONA select MFD_CORE select REGMAP_I2C - depends on I2C + depends on I2C && GENERIC_HARDIRQS help Support for the Wolfson Microelectronics Arizona platform audio SoC core functionality controlled via I2C. @@ -621,7 +625,7 @@ config MFD_ARIZONA_SPI select MFD_ARIZONA select MFD_CORE select REGMAP_SPI - depends on SPI_MASTER + depends on SPI_MASTER && GENERIC_HARDIRQS help Support for the Wolfson Microelectronics Arizona platform audio SoC core functionality controlled via I2C. @@ -641,7 +645,7 @@ config MFD_WM5110 config MFD_WM8400 bool "Support Wolfson Microelectronics WM8400" select MFD_CORE - depends on I2C=y + depends on I2C=y && GENERIC_HARDIRQS select REGMAP_I2C help Support for the Wolfson Microelecronics WM8400 PMIC and audio @@ -785,7 +789,7 @@ config MFD_MC13783 config MFD_MC13XXX tristate - depends on SPI_MASTER || I2C + depends on (SPI_MASTER || I2C) && GENERIC_HARDIRQS select MFD_CORE select MFD_MC13783 help @@ -796,7 +800,7 @@ config MFD_MC13XXX config MFD_MC13XXX_SPI tristate "Freescale MC13783 and MC13892 SPI interface" - depends on SPI_MASTER + depends on SPI_MASTER && GENERIC_HARDIRQS select REGMAP_SPI select MFD_MC13XXX help @@ -804,7 +808,7 @@ config MFD_MC13XXX_SPI config MFD_MC13XXX_I2C tristate "Freescale MC13892 I2C interface" - depends on I2C + depends on I2C && GENERIC_HARDIRQS select REGMAP_I2C select MFD_MC13XXX help @@ -822,7 +826,7 @@ config ABX500_CORE config AB3100_CORE bool "ST-Ericsson AB3100 Mixed Signal Circuit core functions" - depends on I2C=y && ABX500_CORE + depends on I2C=y && ABX500_CORE && GENERIC_HARDIRQS select MFD_CORE default y if ARCH_U300 help @@ -909,7 +913,7 @@ config MFD_TIMBERDALE config LPC_SCH tristate "Intel SCH LPC" - depends on PCI + depends on PCI && GENERIC_HARDIRQS select MFD_CORE help LPC bridge function of the Intel SCH provides support for @@ -917,7 +921,7 @@ config LPC_SCH config LPC_ICH tristate "Intel ICH LPC" - depends on PCI + depends on PCI && GENERIC_HARDIRQS select MFD_CORE help The LPC bridge function of the Intel ICH provides support for @@ -928,7 +932,7 @@ config LPC_ICH config MFD_RDC321X tristate "Support for RDC-R321x southbridge" select MFD_CORE - depends on PCI + depends on PCI && GENERIC_HARDIRQS help Say yes here if you want to have support for the RDC R-321x SoC southbridge which provides access to GPIOs and Watchdog using the @@ -937,7 +941,7 @@ config MFD_RDC321X config MFD_JANZ_CMODIO tristate "Support for Janz CMOD-IO PCI MODULbus Carrier Board" select MFD_CORE - depends on PCI + depends on PCI && GENERIC_HARDIRQS help This is the core driver for the Janz CMOD-IO PCI MODULbus carrier board. This device is a PCI to MODULbus bridge which may @@ -955,7 +959,7 @@ config MFD_JZ4740_ADC config MFD_VX855 tristate "Support for VIA VX855/VX875 integrated south bridge" - depends on PCI + depends on PCI && GENERIC_HARDIRQS select MFD_CORE help Say yes here to enable support for various functions of the @@ -964,7 +968,7 @@ config MFD_VX855 config MFD_WL1273_CORE tristate "Support for TI WL1273 FM radio." - depends on I2C + depends on I2C && GENERIC_HARDIRQS select MFD_CORE default n help @@ -1028,7 +1032,7 @@ config MFD_TPS65090 config MFD_AAT2870_CORE bool "Support for the AnalogicTech AAT2870" select MFD_CORE - depends on I2C=y && GPIOLIB + depends on I2C=y && GPIOLIB && GENERIC_HARDIRQS help If you say yes here you get support for the AAT2870. This driver provides common support for accessing the device, @@ -1060,7 +1064,7 @@ config MFD_RC5T583 config MFD_STA2X11 bool "STA2X11 multi function device support" - depends on STA2X11 + depends on STA2X11 && GENERIC_HARDIRQS select MFD_CORE select REGMAP_MMIO @@ -1077,7 +1081,7 @@ config MFD_PALMAS select MFD_CORE select REGMAP_I2C select REGMAP_IRQ - depends on I2C=y + depends on I2C=y && GENERIC_HARDIRQS help If you say yes here you get support for the Palmas series of PMIC chips from Texas Instruments. @@ -1085,7 +1089,7 @@ config MFD_PALMAS config MFD_VIPERBOARD tristate "Support for Nano River Technologies Viperboard" select MFD_CORE - depends on USB + depends on USB && GENERIC_HARDIRQS default n help Say yes here if you want support for Nano River Technologies @@ -1099,7 +1103,7 @@ config MFD_VIPERBOARD config MFD_RETU tristate "Support for Retu multi-function device" select MFD_CORE - depends on I2C + depends on I2C && GENERIC_HARDIRQS select REGMAP_IRQ help Retu is a multi-function device found on Nokia Internet Tablets @@ -1110,7 +1114,7 @@ config MFD_AS3711 select MFD_CORE select REGMAP_I2C select REGMAP_IRQ - depends on I2C=y + depends on I2C=y && GENERIC_HARDIRQS help Support for the AS3711 PMIC from AMS |