diff options
Diffstat (limited to 'drivers/mfd/Kconfig')
-rw-r--r-- | drivers/mfd/Kconfig | 80 |
1 files changed, 63 insertions, 17 deletions
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index 1bc97c2..eea61e3 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -18,6 +18,17 @@ config MFD_CS5535 This is the core driver for CS5535/CS5536 MFD functions. This is necessary for using the board's GPIO and MFGPT functionality. +config MFD_ACT8945A + tristate "Active-semi ACT8945A" + select MFD_CORE + select REGMAP_I2C + depends on I2C && OF + help + Support for the ACT8945A PMIC from Active-semi. This device + features three step-down DC/DC converters and four low-dropout + linear regulators, along with a complete ActivePath battery + charger. + config MFD_AS3711 bool "AMS AS3711" select MFD_CORE @@ -91,14 +102,29 @@ config MFD_BCM590XX Support for the BCM590xx PMUs from Broadcom config MFD_AXP20X - bool "X-Powers AXP20X" + tristate select MFD_CORE - select REGMAP_I2C select REGMAP_IRQ - depends on I2C=y + +config MFD_AXP20X_I2C + tristate "X-Powers AXP series PMICs with I2C" + select MFD_AXP20X + select REGMAP_I2C + depends on I2C + help + If you say Y here you get support for the X-Powers AXP series power + management ICs (PMICs) controlled with I2C. + This driver include only the core APIs. You have to select individual + components like regulators or the PEK (Power Enable Key) under the + corresponding menus. + +config MFD_AXP20X_RSB + tristate "X-Powers AXP series PMICs with RSB" + select MFD_AXP20X + depends on SUNXI_RSB help - If you say Y here you get support for the X-Powers AXP202, AXP209 and - AXP288 power management IC (PMIC). + If you say Y here you get support for the X-Powers AXP series power + management ICs (PMICs) controlled with RSB. This driver include only the core APIs. You have to select individual components like regulators or the PEK (Power Enable Key) under the corresponding menus. @@ -203,7 +229,7 @@ config MFD_DA9062 select MFD_CORE select REGMAP_I2C select REGMAP_IRQ - depends on I2C=y + depends on I2C help Say yes here for support for the Dialog Semiconductor DA9062 PMIC. This includes the I2C driver and core APIs. @@ -215,7 +241,7 @@ config MFD_DA9063 select MFD_CORE select REGMAP_I2C select REGMAP_IRQ - depends on I2C=y + depends on I2C help Say yes here for support for the Dialog Semiconductor DA9063 PMIC. This includes the I2C driver and core APIs. @@ -224,7 +250,7 @@ config MFD_DA9063 config MFD_DA9150 tristate "Dialog Semiconductor DA9150 Charger Fuel-Gauge chip" - depends on I2C=y + depends on I2C select MFD_CORE select REGMAP_I2C select REGMAP_IRQ @@ -271,6 +297,15 @@ config MFD_MC13XXX_I2C help Select this if your MC13xxx is connected via an I2C bus. +config MFD_MX25_TSADC + tristate "Freescale i.MX25 integrated Touchscreen and ADC unit" + select REGMAP_MMIO + depends on (SOC_IMX25 && OF) || COMPILE_TEST + help + Enable support for the integrated Touchscreen and ADC unit of the + i.MX25 processors. They consist of a conversion queue for general + purpose ADC and a queue for Touchscreens. + config MFD_HI6421_PMIC tristate "HiSilicon Hi6421 PMU/Codec IC" depends on OF @@ -445,7 +480,7 @@ config MFD_KEMPLD config MFD_88PM800 tristate "Marvell 88PM800" - depends on I2C=y + depends on I2C select REGMAP_I2C select REGMAP_IRQ select MFD_CORE @@ -457,7 +492,7 @@ config MFD_88PM800 config MFD_88PM805 tristate "Marvell 88PM805" - depends on I2C=y + depends on I2C select REGMAP_I2C select REGMAP_IRQ select MFD_CORE @@ -493,8 +528,8 @@ config MFD_MAX14577 of the device. config MFD_MAX77686 - bool "Maxim Semiconductor MAX77686/802 PMIC Support" - depends on I2C=y + tristate "Maxim Semiconductor MAX77686/802 PMIC Support" + depends on I2C depends on OF select MFD_CORE select REGMAP_I2C @@ -538,7 +573,7 @@ config MFD_MAX77843 config MFD_MAX8907 tristate "Maxim Semiconductor MAX8907 PMIC Support" select MFD_CORE - depends on I2C=y + depends on I2C select REGMAP_I2C select REGMAP_IRQ help @@ -743,7 +778,7 @@ config MFD_RTSX_PCI config MFD_RT5033 tristate "Richtek RT5033 Power Management IC" - depends on I2C=y + depends on I2C select MFD_CORE select REGMAP_I2C select REGMAP_IRQ @@ -1106,6 +1141,19 @@ config TPS6507X This driver can also be built as a module. If so, the module will be called tps6507x. +config MFD_TPS65086 + tristate "TI TPS65086 Power Management Integrated Chips (PMICs)" + select REGMAP + select REGMAP_IRQ + select REGMAP_I2C + depends on I2C + help + If you say yes here you get support for the TPS65086 series of + Power Management chips. + This driver provides common support for accessing the device, + additional drivers must be enabled in order to use the + functionality of the device. + config TPS65911_COMPARATOR tristate @@ -1370,7 +1418,6 @@ config MFD_ARIZONA config MFD_ARIZONA_I2C tristate "Cirrus Logic/Wolfson Microelectronics Arizona platform with I2C" select MFD_ARIZONA - select MFD_CORE select REGMAP_I2C depends on I2C help @@ -1380,12 +1427,11 @@ config MFD_ARIZONA_I2C config MFD_ARIZONA_SPI tristate "Cirrus Logic/Wolfson Microelectronics Arizona platform with SPI" select MFD_ARIZONA - select MFD_CORE select REGMAP_SPI depends on SPI_MASTER help Support for the Cirrus Logic/Wolfson Microelectronics Arizona platform - audio SoC core functionality controlled via I2C. + audio SoC core functionality controlled via SPI. config MFD_CS47L24 bool "Cirrus Logic CS47L24 and WM1831" |