diff options
Diffstat (limited to 'drivers/misc')
-rw-r--r-- | drivers/misc/eeprom/Kconfig | 2 | ||||
-rw-r--r-- | drivers/misc/eeprom/at24.c | 121 |
2 files changed, 82 insertions, 41 deletions
diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig index 04f2e1f..2493547 100644 --- a/drivers/misc/eeprom/Kconfig +++ b/drivers/misc/eeprom/Kconfig @@ -3,6 +3,8 @@ menu "EEPROM support" config EEPROM_AT24 tristate "I2C EEPROMs / RAMs / ROMs from most vendors" depends on I2C && SYSFS + select REGMAP + select NVMEM help Enable this driver to get read/write support to most I2C EEPROMs and compatible devices like FRAMs, SRAMs, ROMs etc. After you diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index d105c25..f15cda9 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -15,7 +15,6 @@ #include <linux/slab.h> #include <linux/delay.h> #include <linux/mutex.h> -#include <linux/sysfs.h> #include <linux/mod_devicetable.h> #include <linux/log2.h> #include <linux/bitops.h> @@ -23,6 +22,8 @@ #include <linux/of.h> #include <linux/acpi.h> #include <linux/i2c.h> +#include <linux/nvmem-provider.h> +#include <linux/regmap.h> #include <linux/platform_data/at24.h> /* @@ -64,12 +65,15 @@ struct at24_data { * but not from changes by other I2C masters. */ struct mutex lock; - struct bin_attribute bin; u8 *writebuf; unsigned write_max; unsigned num_addresses; + struct regmap_config regmap_config; + struct nvmem_config nvmem_config; + struct nvmem_device *nvmem; + /* * Some chips tie up multiple I2C addresses; dummy devices reserve * them for us, and we'll use them with SMBus calls. @@ -283,17 +287,6 @@ static ssize_t at24_read(struct at24_data *at24, return retval; } -static ssize_t at24_bin_read(struct file *filp, struct kobject *kobj, - struct bin_attribute *attr, - char *buf, loff_t off, size_t count) -{ - struct at24_data *at24; - - at24 = dev_get_drvdata(kobj_to_dev(kobj)); - return at24_read(at24, buf, off, count); -} - - /* * Note that if the hardware write-protect pin is pulled high, the whole * chip is normally write protected. But there are plenty of product @@ -414,16 +407,6 @@ static ssize_t at24_write(struct at24_data *at24, const char *buf, loff_t off, return retval; } -static ssize_t at24_bin_write(struct file *filp, struct kobject *kobj, - struct bin_attribute *attr, - char *buf, loff_t off, size_t count) -{ - struct at24_data *at24; - - at24 = dev_get_drvdata(kobj_to_dev(kobj)); - return at24_write(at24, buf, off, count); -} - /*-------------------------------------------------------------------------*/ /* @@ -450,6 +433,49 @@ static ssize_t at24_macc_write(struct memory_accessor *macc, const char *buf, /*-------------------------------------------------------------------------*/ +/* + * Provide a regmap interface, which is registered with the NVMEM + * framework +*/ +static int at24_regmap_read(void *context, const void *reg, size_t reg_size, + void *val, size_t val_size) +{ + struct at24_data *at24 = context; + off_t offset = *(u32 *)reg; + int err; + + err = at24_read(at24, val, offset, val_size); + if (err) + return err; + return 0; +} + +static int at24_regmap_write(void *context, const void *data, size_t count) +{ + struct at24_data *at24 = context; + const char *buf; + u32 offset; + size_t len; + int err; + + memcpy(&offset, data, sizeof(offset)); + buf = (const char *)data + sizeof(offset); + len = count - sizeof(offset); + + err = at24_write(at24, buf, offset, len); + if (err) + return err; + return 0; +} + +static const struct regmap_bus at24_regmap_bus = { + .read = at24_regmap_read, + .write = at24_regmap_write, + .reg_format_endian_default = REGMAP_ENDIAN_NATIVE, +}; + +/*-------------------------------------------------------------------------*/ + #ifdef CONFIG_OF static void at24_get_ofdata(struct i2c_client *client, struct at24_platform_data *chip) @@ -481,6 +507,7 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) struct at24_data *at24; int err; unsigned i, num_addresses; + struct regmap *regmap; if (client->dev.platform_data) { chip = *(struct at24_platform_data *)client->dev.platform_data; @@ -573,16 +600,6 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) at24->chip = chip; at24->num_addresses = num_addresses; - /* - * Export the EEPROM bytes through sysfs, since that's convenient. - * By default, only root should see the data (maybe passwords etc) - */ - sysfs_bin_attr_init(&at24->bin); - at24->bin.attr.name = "eeprom"; - at24->bin.attr.mode = chip.flags & AT24_FLAG_IRUGO ? S_IRUGO : S_IRUSR; - at24->bin.read = at24_bin_read; - at24->bin.size = chip.byte_len; - at24->macc.read = at24_macc_read; writable = !(chip.flags & AT24_FLAG_READONLY); @@ -593,9 +610,6 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) at24->macc.write = at24_macc_write; - at24->bin.write = at24_bin_write; - at24->bin.attr.mode |= S_IWUSR; - if (write_max > io_limit) write_max = io_limit; if (use_smbus && write_max > I2C_SMBUS_BLOCK_MAX) @@ -627,14 +641,38 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) } } - err = sysfs_create_bin_file(&client->dev.kobj, &at24->bin); - if (err) + at24->regmap_config.reg_bits = 32; + at24->regmap_config.val_bits = 8; + at24->regmap_config.reg_stride = 1; + at24->regmap_config.max_register = chip.byte_len - 1; + + regmap = devm_regmap_init(&client->dev, &at24_regmap_bus, at24, + &at24->regmap_config); + if (IS_ERR(regmap)) { + dev_err(&client->dev, "regmap init failed\n"); + err = PTR_ERR(regmap); goto err_clients; + } + + at24->nvmem_config.name = dev_name(&client->dev); + at24->nvmem_config.dev = &client->dev; + at24->nvmem_config.read_only = !writable; + at24->nvmem_config.root_only = true; + at24->nvmem_config.owner = THIS_MODULE; + at24->nvmem_config.compat = true; + at24->nvmem_config.base_dev = &client->dev; + + at24->nvmem = nvmem_register(&at24->nvmem_config); + + if (IS_ERR(at24->nvmem)) { + err = PTR_ERR(at24->nvmem); + goto err_clients; + } i2c_set_clientdata(client, at24); - dev_info(&client->dev, "%zu byte %s EEPROM, %s, %u bytes/write\n", - at24->bin.size, client->name, + dev_info(&client->dev, "%u byte %s EEPROM, %s, %u bytes/write\n", + chip.byte_len, client->name, writable ? "writable" : "read-only", at24->write_max); if (use_smbus == I2C_SMBUS_WORD_DATA || use_smbus == I2C_SMBUS_BYTE_DATA) { @@ -663,7 +701,8 @@ static int at24_remove(struct i2c_client *client) int i; at24 = i2c_get_clientdata(client); - sysfs_remove_bin_file(&client->dev.kobj, &at24->bin); + + nvmem_unregister(at24->nvmem); for (i = 1; i < at24->num_addresses; i++) i2c_unregister_device(at24->client[i]); |