diff options
Diffstat (limited to 'drivers/misc')
93 files changed, 11170 insertions, 4004 deletions
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 054fc10..a216b46 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -440,7 +440,7 @@ config ARM_CHARLCD still useful. config BMP085 - bool + tristate depends on SYSFS config BMP085_I2C @@ -470,7 +470,7 @@ config BMP085_SPI config PCH_PHUB tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB" select GENERIC_NET_UTILS - depends on PCI && (X86_32 || COMPILE_TEST) + depends on PCI && (X86_32 || MIPS || COMPILE_TEST) help This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of Intel Topcliff which is an IOH(Input/Output Hub) for x86 embedded @@ -525,6 +525,284 @@ config VEXPRESS_SYSCFG ARM Ltd. Versatile Express uses specialised platform configuration bus. System Configuration interface is one of the possible means of generating transactions on this bus. +config PANEL + tristate "Parallel port LCD/Keypad Panel support" + depends on PARPORT + ---help--- + Say Y here if you have an HD44780 or KS-0074 LCD connected to your + parallel port. This driver also features 4 and 6-key keypads. The LCD + is accessible through the /dev/lcd char device (10, 156), and the + keypad through /dev/keypad (10, 185). Both require misc device to be + enabled. This code can either be compiled as a module, or linked into + the kernel and started at boot. If you don't understand what all this + is about, say N. + +config PANEL_PARPORT + int "Default parallel port number (0=LPT1)" + depends on PANEL + range 0 255 + default "0" + ---help--- + This is the index of the parallel port the panel is connected to. One + driver instance only supports one parallel port, so if your keypad + and LCD are connected to two separate ports, you have to start two + modules with different arguments. Numbering starts with '0' for LPT1, + and so on. + +config PANEL_PROFILE + int "Default panel profile (0-5, 0=custom)" + depends on PANEL + range 0 5 + default "5" + ---help--- + To ease configuration, the driver supports different configuration + profiles for past and recent wirings. These profiles can also be + used to define an approximative configuration, completed by a few + other options. Here are the profiles : + + 0 = custom (see further) + 1 = 2x16 parallel LCD, old keypad + 2 = 2x16 serial LCD (KS-0074), new keypad + 3 = 2x16 parallel LCD (Hantronix), no keypad + 4 = 2x16 parallel LCD (Nexcom NSA1045) with Nexcom's keypad + 5 = 2x40 parallel LCD (old one), with old keypad + + Custom configurations allow you to define how your display is + wired to the parallel port, and how it works. This is only intended + for experts. + +config PANEL_KEYPAD + depends on PANEL && PANEL_PROFILE="0" + int "Keypad type (0=none, 1=old 6 keys, 2=new 6 keys, 3=Nexcom 4 keys)" + range 0 3 + default 0 + ---help--- + This enables and configures a keypad connected to the parallel port. + The keys will be read from character device 10,185. Valid values are : + + 0 : do not enable this driver + 1 : old 6 keys keypad + 2 : new 6 keys keypad, as used on the server at www.ant-computing.com + 3 : Nexcom NSA1045's 4 keys keypad + + New profiles can be described in the driver source. The driver also + supports simultaneous keys pressed when the keypad supports them. + +config PANEL_LCD + depends on PANEL && PANEL_PROFILE="0" + int "LCD type (0=none, 1=custom, 2=old //, 3=ks0074, 4=hantronix, 5=Nexcom)" + range 0 5 + default 0 + ---help--- + This enables and configures an LCD connected to the parallel port. + The driver includes an interpreter for escape codes starting with + '\e[L' which are specific to the LCD, and a few ANSI codes. The + driver will be registered as character device 10,156, usually + under the name '/dev/lcd'. There are a total of 6 supported types : + + 0 : do not enable the driver + 1 : custom configuration and wiring (see further) + 2 : 2x16 & 2x40 parallel LCD (old wiring) + 3 : 2x16 serial LCD (KS-0074 based) + 4 : 2x16 parallel LCD (Hantronix wiring) + 5 : 2x16 parallel LCD (Nexcom wiring) + + When type '1' is specified, other options will appear to configure + more precise aspects (wiring, dimensions, protocol, ...). Please note + that those values changed from the 2.4 driver for better consistency. + +config PANEL_LCD_HEIGHT + depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" + int "Number of lines on the LCD (1-2)" + range 1 2 + default 2 + ---help--- + This is the number of visible character lines on the LCD in custom profile. + It can either be 1 or 2. + +config PANEL_LCD_WIDTH + depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" + int "Number of characters per line on the LCD (1-40)" + range 1 40 + default 40 + ---help--- + This is the number of characters per line on the LCD in custom profile. + Common values are 16,20,24,40. + +config PANEL_LCD_BWIDTH + depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" + int "Internal LCD line width (1-40, 40 by default)" + range 1 40 + default 40 + ---help--- + Most LCDs use a standard controller which supports hardware lines of 40 + characters, although sometimes only 16, 20 or 24 of them are really wired + to the terminal. This results in some non-visible but addressable characters, + and is the case for most parallel LCDs. Other LCDs, and some serial ones, + however, use the same line width internally as what is visible. The KS0074 + for example, uses 16 characters per line for 16 visible characters per line. + + This option lets you configure the value used by your LCD in 'custom' profile. + If you don't know, put '40' here. + +config PANEL_LCD_HWIDTH + depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" + int "Hardware LCD line width (1-64, 64 by default)" + range 1 64 + default 64 + ---help--- + Most LCDs use a single address bit to differentiate line 0 and line 1. Since + some of them need to be able to address 40 chars with the lower bits, they + often use the immediately superior power of 2, which is 64, to address the + next line. + + If you don't know what your LCD uses, in doubt let 16 here for a 2x16, and + 64 here for a 2x40. + +config PANEL_LCD_CHARSET + depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" + int "LCD character set (0=normal, 1=KS0074)" + range 0 1 + default 0 + ---help--- + Some controllers such as the KS0074 use a somewhat strange character set + where many symbols are at unusual places. The driver knows how to map + 'standard' ASCII characters to the character sets used by these controllers. + Valid values are : + + 0 : normal (untranslated) character set + 1 : KS0074 character set + + If you don't know, use the normal one (0). + +config PANEL_LCD_PROTO + depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" + int "LCD communication mode (0=parallel 8 bits, 1=serial)" + range 0 1 + default 0 + ---help--- + This driver now supports any serial or parallel LCD wired to a parallel + port. But before assigning signals, the driver needs to know if it will + be driving a serial LCD or a parallel one. Serial LCDs only use 2 wires + (SDA/SCL), while parallel ones use 2 or 3 wires for the control signals + (E, RS, sometimes RW), and 4 or 8 for the data. Use 0 here for a 8 bits + parallel LCD, and 1 for a serial LCD. + +config PANEL_LCD_PIN_E + depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0" + int "Parallel port pin number & polarity connected to the LCD E signal (-17...17) " + range -17 17 + default 14 + ---help--- + This describes the number of the parallel port pin to which the LCD 'E' + signal has been connected. It can be : + + 0 : no connection (eg: connected to ground) + 1..17 : directly connected to any of these pins on the DB25 plug + -1..-17 : connected to the same pin through an inverter (eg: transistor). + + Default for the 'E' pin in custom profile is '14' (AUTOFEED). + +config PANEL_LCD_PIN_RS + depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0" + int "Parallel port pin number & polarity connected to the LCD RS signal (-17...17) " + range -17 17 + default 17 + ---help--- + This describes the number of the parallel port pin to which the LCD 'RS' + signal has been connected. It can be : + + 0 : no connection (eg: connected to ground) + 1..17 : directly connected to any of these pins on the DB25 plug + -1..-17 : connected to the same pin through an inverter (eg: transistor). + + Default for the 'RS' pin in custom profile is '17' (SELECT IN). + +config PANEL_LCD_PIN_RW + depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0" + int "Parallel port pin number & polarity connected to the LCD RW signal (-17...17) " + range -17 17 + default 16 + ---help--- + This describes the number of the parallel port pin to which the LCD 'RW' + signal has been connected. It can be : + + 0 : no connection (eg: connected to ground) + 1..17 : directly connected to any of these pins on the DB25 plug + -1..-17 : connected to the same pin through an inverter (eg: transistor). + + Default for the 'RW' pin in custom profile is '16' (INIT). + +config PANEL_LCD_PIN_SCL + depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO!="0" + int "Parallel port pin number & polarity connected to the LCD SCL signal (-17...17) " + range -17 17 + default 1 + ---help--- + This describes the number of the parallel port pin to which the serial + LCD 'SCL' signal has been connected. It can be : + + 0 : no connection (eg: connected to ground) + 1..17 : directly connected to any of these pins on the DB25 plug + -1..-17 : connected to the same pin through an inverter (eg: transistor). + + Default for the 'SCL' pin in custom profile is '1' (STROBE). + +config PANEL_LCD_PIN_SDA + depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO!="0" + int "Parallel port pin number & polarity connected to the LCD SDA signal (-17...17) " + range -17 17 + default 2 + ---help--- + This describes the number of the parallel port pin to which the serial + LCD 'SDA' signal has been connected. It can be : + + 0 : no connection (eg: connected to ground) + 1..17 : directly connected to any of these pins on the DB25 plug + -1..-17 : connected to the same pin through an inverter (eg: transistor). + + Default for the 'SDA' pin in custom profile is '2' (D0). + +config PANEL_LCD_PIN_BL + depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" + int "Parallel port pin number & polarity connected to the LCD backlight signal (-17...17) " + range -17 17 + default 0 + ---help--- + This describes the number of the parallel port pin to which the LCD 'BL' signal + has been connected. It can be : + + 0 : no connection (eg: connected to ground) + 1..17 : directly connected to any of these pins on the DB25 plug + -1..-17 : connected to the same pin through an inverter (eg: transistor). + + Default for the 'BL' pin in custom profile is '0' (uncontrolled). + +config PANEL_CHANGE_MESSAGE + depends on PANEL + bool "Change LCD initialization message ?" + default "n" + ---help--- + This allows you to replace the boot message indicating the kernel version + and the driver version with a custom message. This is useful on appliances + where a simple 'Starting system' message can be enough to stop a customer + from worrying. + + If you say 'Y' here, you'll be able to choose a message yourself. Otherwise, + say 'N' and keep the default message with the version. + +config PANEL_BOOT_MESSAGE + depends on PANEL && PANEL_CHANGE_MESSAGE="y" + string "New initialization message" + default "" + ---help--- + This allows you to replace the boot message indicating the kernel version + and the driver version with a custom message. This is useful on appliances + where a simple 'Starting system' message can be enough to stop a customer + from worrying. + + An empty message will only clear the display at driver init time. Any other + printf()-formatted message is valid with newline and escape codes. source "drivers/misc/c2port/Kconfig" source "drivers/misc/eeprom/Kconfig" diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 537d7f3..b2fb6dbf 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -56,3 +56,4 @@ obj-$(CONFIG_GENWQE) += genwqe/ obj-$(CONFIG_ECHO) += echo/ obj-$(CONFIG_VEXPRESS_SYSCFG) += vexpress-syscfg.o obj-$(CONFIG_CXL_BASE) += cxl/ +obj-$(CONFIG_PANEL) += panel.o diff --git a/drivers/misc/ad525x_dpot.c b/drivers/misc/ad525x_dpot.c index 15e88078..fe16727 100644 --- a/drivers/misc/ad525x_dpot.c +++ b/drivers/misc/ad525x_dpot.c @@ -216,7 +216,7 @@ static s32 dpot_read_i2c(struct dpot_data *dpot, u8 reg) */ value = swab16(value); - if (dpot->uid == DPOT_UID(AD5271_ID)) + if (dpot->uid == DPOT_UID(AD5274_ID)) value = value >> 2; return value; default: @@ -452,7 +452,7 @@ static ssize_t sysfs_set_reg(struct device *dev, int err; if (reg & DPOT_ADDR_OTP_EN) { - if (!strncmp(buf, "enabled", sizeof("enabled"))) + if (sysfs_streq(buf, "enabled")) set_bit(DPOT_RDAC_MASK & reg, data->otp_en_mask); else clear_bit(DPOT_RDAC_MASK & reg, data->otp_en_mask); diff --git a/drivers/misc/apds990x.c b/drivers/misc/apds990x.c index a3e789b..dfb72ec 100644 --- a/drivers/misc/apds990x.c +++ b/drivers/misc/apds990x.c @@ -1215,7 +1215,7 @@ static int apds990x_remove(struct i2c_client *client) #ifdef CONFIG_PM_SLEEP static int apds990x_suspend(struct device *dev) { - struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct i2c_client *client = to_i2c_client(dev); struct apds990x_chip *chip = i2c_get_clientdata(client); apds990x_chip_off(chip); @@ -1224,7 +1224,7 @@ static int apds990x_suspend(struct device *dev) static int apds990x_resume(struct device *dev) { - struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct i2c_client *client = to_i2c_client(dev); struct apds990x_chip *chip = i2c_get_clientdata(client); /* @@ -1240,7 +1240,7 @@ static int apds990x_resume(struct device *dev) #ifdef CONFIG_PM static int apds990x_runtime_suspend(struct device *dev) { - struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct i2c_client *client = to_i2c_client(dev); struct apds990x_chip *chip = i2c_get_clientdata(client); apds990x_chip_off(chip); @@ -1249,7 +1249,7 @@ static int apds990x_runtime_suspend(struct device *dev) static int apds990x_runtime_resume(struct device *dev) { - struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct i2c_client *client = to_i2c_client(dev); struct apds990x_chip *chip = i2c_get_clientdata(client); apds990x_chip_on(chip); diff --git a/drivers/misc/arm-charlcd.c b/drivers/misc/arm-charlcd.c index c65b5ea..b3176ee 100644 --- a/drivers/misc/arm-charlcd.c +++ b/drivers/misc/arm-charlcd.c @@ -8,7 +8,6 @@ * Author: Linus Walleij <triad@df.lth.se> */ #include <linux/init.h> -#include <linux/module.h> #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/of.h> @@ -328,20 +327,6 @@ out_no_resource: return ret; } -static int __exit charlcd_remove(struct platform_device *pdev) -{ - struct charlcd *lcd = platform_get_drvdata(pdev); - - if (lcd) { - free_irq(lcd->irq, lcd); - iounmap(lcd->virtbase); - release_mem_region(lcd->phybase, lcd->physize); - kfree(lcd); - } - - return 0; -} - static int charlcd_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); @@ -376,13 +361,8 @@ static struct platform_driver charlcd_driver = { .driver = { .name = DRIVERNAME, .pm = &charlcd_pm_ops, + .suppress_bind_attrs = true, .of_match_table = of_match_ptr(charlcd_match), }, - .remove = __exit_p(charlcd_remove), }; - -module_platform_driver_probe(charlcd_driver, charlcd_probe); - -MODULE_AUTHOR("Linus Walleij <triad@df.lth.se>"); -MODULE_DESCRIPTION("ARM Character LCD Driver"); -MODULE_LICENSE("GPL v2"); +builtin_platform_driver_probe(charlcd_driver, charlcd_probe); diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c index e11a0bd..0516ecd 100644 --- a/drivers/misc/atmel-ssc.c +++ b/drivers/misc/atmel-ssc.c @@ -34,6 +34,7 @@ struct ssc_device *ssc_request(unsigned int ssc_num) if (ssc->pdev->dev.of_node) { if (of_alias_get_id(ssc->pdev->dev.of_node, "ssc") == ssc_num) { + ssc->pdev->id = ssc_num; ssc_valid = 1; break; } diff --git a/drivers/misc/bh1770glc.c b/drivers/misc/bh1770glc.c index 753d7ec..845466e 100644 --- a/drivers/misc/bh1770glc.c +++ b/drivers/misc/bh1770glc.c @@ -1323,7 +1323,7 @@ static int bh1770_remove(struct i2c_client *client) #ifdef CONFIG_PM_SLEEP static int bh1770_suspend(struct device *dev) { - struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct i2c_client *client = to_i2c_client(dev); struct bh1770_chip *chip = i2c_get_clientdata(client); bh1770_chip_off(chip); @@ -1333,7 +1333,7 @@ static int bh1770_suspend(struct device *dev) static int bh1770_resume(struct device *dev) { - struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct i2c_client *client = to_i2c_client(dev); struct bh1770_chip *chip = i2c_get_clientdata(client); int ret = 0; @@ -1361,7 +1361,7 @@ static int bh1770_resume(struct device *dev) #ifdef CONFIG_PM static int bh1770_runtime_suspend(struct device *dev) { - struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct i2c_client *client = to_i2c_client(dev); struct bh1770_chip *chip = i2c_get_clientdata(client); bh1770_chip_off(chip); @@ -1371,7 +1371,7 @@ static int bh1770_runtime_suspend(struct device *dev) static int bh1770_runtime_resume(struct device *dev) { - struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct i2c_client *client = to_i2c_client(dev); struct bh1770_chip *chip = i2c_get_clientdata(client); bh1770_chip_on(chip); diff --git a/drivers/misc/c2port/core.c b/drivers/misc/c2port/core.c index cc8645b..1922cb8 100644 --- a/drivers/misc/c2port/core.c +++ b/drivers/misc/c2port/core.c @@ -721,9 +721,7 @@ static ssize_t c2port_read_flash_data(struct file *filp, struct kobject *kobj, struct bin_attribute *attr, char *buffer, loff_t offset, size_t count) { - struct c2port_device *c2dev = - dev_get_drvdata(container_of(kobj, - struct device, kobj)); + struct c2port_device *c2dev = dev_get_drvdata(kobj_to_dev(kobj)); ssize_t ret; /* Check the device and flash access status */ @@ -838,9 +836,7 @@ static ssize_t c2port_write_flash_data(struct file *filp, struct kobject *kobj, struct bin_attribute *attr, char *buffer, loff_t offset, size_t count) { - struct c2port_device *c2dev = - dev_get_drvdata(container_of(kobj, - struct device, kobj)); + struct c2port_device *c2dev = dev_get_drvdata(kobj_to_dev(kobj)); int ret; /* Check the device access status */ diff --git a/drivers/misc/cxl/Makefile b/drivers/misc/cxl/Makefile index be2ac5c..8a55c1a 100644 --- a/drivers/misc/cxl/Makefile +++ b/drivers/misc/cxl/Makefile @@ -4,6 +4,7 @@ ccflags-$(CONFIG_PPC_WERROR) += -Werror cxl-y += main.o file.o irq.o fault.o native.o cxl-y += context.o sysfs.o debugfs.o pci.o trace.o cxl-y += vphb.o api.o +cxl-$(CONFIG_PPC_PSERIES) += flash.o guest.o of.o hcalls.o obj-$(CONFIG_CXL) += cxl.o obj-$(CONFIG_CXL_BASE) += base.o diff --git a/drivers/misc/cxl/api.c b/drivers/misc/cxl/api.c index ea3eeb7..2107c94 100644 --- a/drivers/misc/cxl/api.c +++ b/drivers/misc/cxl/api.c @@ -51,8 +51,6 @@ struct cxl_context *cxl_dev_context_init(struct pci_dev *dev) if (rc) goto err_mapping; - cxl_assign_psn_space(ctx); - return ctx; err_mapping: @@ -78,7 +76,6 @@ struct device *cxl_get_phys_dev(struct pci_dev *dev) return afu->adapter->dev.parent; } -EXPORT_SYMBOL_GPL(cxl_get_phys_dev); int cxl_release_context(struct cxl_context *ctx) { @@ -91,28 +88,11 @@ int cxl_release_context(struct cxl_context *ctx) } EXPORT_SYMBOL_GPL(cxl_release_context); -int cxl_allocate_afu_irqs(struct cxl_context *ctx, int num) -{ - if (num == 0) - num = ctx->afu->pp_irqs; - return afu_allocate_irqs(ctx, num); -} -EXPORT_SYMBOL_GPL(cxl_allocate_afu_irqs); - -void cxl_free_afu_irqs(struct cxl_context *ctx) -{ - afu_irq_name_free(ctx); - cxl_release_irq_ranges(&ctx->irqs, ctx->afu->adapter); -} -EXPORT_SYMBOL_GPL(cxl_free_afu_irqs); - static irq_hw_number_t cxl_find_afu_irq(struct cxl_context *ctx, int num) { __u16 range; int r; - WARN_ON(num == 0); - for (r = 0; r < CXL_IRQ_RANGES; r++) { range = ctx->irqs.range[r]; if (num < range) { @@ -123,6 +103,44 @@ static irq_hw_number_t cxl_find_afu_irq(struct cxl_context *ctx, int num) return 0; } +int cxl_allocate_afu_irqs(struct cxl_context *ctx, int num) +{ + int res; + irq_hw_number_t hwirq; + + if (num == 0) + num = ctx->afu->pp_irqs; + res = afu_allocate_irqs(ctx, num); + if (!res && !cpu_has_feature(CPU_FTR_HVMODE)) { + /* In a guest, the PSL interrupt is not multiplexed. It was + * allocated above, and we need to set its handler + */ + hwirq = cxl_find_afu_irq(ctx, 0); + if (hwirq) + cxl_map_irq(ctx->afu->adapter, hwirq, cxl_ops->psl_interrupt, ctx, "psl"); + } + return res; +} +EXPORT_SYMBOL_GPL(cxl_allocate_afu_irqs); + +void cxl_free_afu_irqs(struct cxl_context *ctx) +{ + irq_hw_number_t hwirq; + unsigned int virq; + + if (!cpu_has_feature(CPU_FTR_HVMODE)) { + hwirq = cxl_find_afu_irq(ctx, 0); + if (hwirq) { + virq = irq_find_mapping(NULL, hwirq); + if (virq) + cxl_unmap_irq(virq, ctx); + } + } + afu_irq_name_free(ctx); + cxl_ops->release_irq_ranges(&ctx->irqs, ctx->afu->adapter); +} +EXPORT_SYMBOL_GPL(cxl_free_afu_irqs); + int cxl_map_afu_irq(struct cxl_context *ctx, int num, irq_handler_t handler, void *cookie, char *name) { @@ -178,7 +196,7 @@ int cxl_start_context(struct cxl_context *ctx, u64 wed, cxl_ctx_get(); - if ((rc = cxl_attach_process(ctx, kernel, wed , 0))) { + if ((rc = cxl_ops->attach_process(ctx, kernel, wed, 0))) { put_pid(ctx->pid); cxl_ctx_put(); goto out; @@ -193,7 +211,7 @@ EXPORT_SYMBOL_GPL(cxl_start_context); int cxl_process_element(struct cxl_context *ctx) { - return ctx->pe; + return ctx->external_pe; } EXPORT_SYMBOL_GPL(cxl_process_element); @@ -207,7 +225,6 @@ EXPORT_SYMBOL_GPL(cxl_stop_context); void cxl_set_master(struct cxl_context *ctx) { ctx->master = true; - cxl_assign_psn_space(ctx); } EXPORT_SYMBOL_GPL(cxl_set_master); @@ -325,15 +342,11 @@ EXPORT_SYMBOL_GPL(cxl_start_work); void __iomem *cxl_psa_map(struct cxl_context *ctx) { - struct cxl_afu *afu = ctx->afu; - int rc; - - rc = cxl_afu_check_and_enable(afu); - if (rc) + if (ctx->status != STARTED) return NULL; pr_devel("%s: psn_phys%llx size:%llx\n", - __func__, afu->psn_phys, afu->adapter->ps_size); + __func__, ctx->psn_phys, ctx->psn_size); return ioremap(ctx->psn_phys, ctx->psn_size); } EXPORT_SYMBOL_GPL(cxl_psa_map); @@ -349,11 +362,11 @@ int cxl_afu_reset(struct cxl_context *ctx) struct cxl_afu *afu = ctx->afu; int rc; - rc = __cxl_afu_reset(afu); + rc = cxl_ops->afu_reset(afu); if (rc) return rc; - return cxl_afu_check_and_enable(afu); + return cxl_ops->afu_check_and_enable(afu); } EXPORT_SYMBOL_GPL(cxl_afu_reset); @@ -363,3 +376,11 @@ void cxl_perst_reloads_same_image(struct cxl_afu *afu, afu->adapter->perst_same_image = perst_reloads_same_image; } EXPORT_SYMBOL_GPL(cxl_perst_reloads_same_image); + +ssize_t cxl_read_adapter_vpd(struct pci_dev *dev, void *buf, size_t count) +{ + struct cxl_afu *afu = cxl_pci_to_afu(dev); + + return cxl_ops->read_adapter_vpd(afu->adapter, buf, count); +} +EXPORT_SYMBOL_GPL(cxl_read_adapter_vpd); diff --git a/drivers/misc/cxl/base.c b/drivers/misc/cxl/base.c index a9f0dd3..9b90ec6 100644 --- a/drivers/misc/cxl/base.c +++ b/drivers/misc/cxl/base.c @@ -11,6 +11,7 @@ #include <linux/rcupdate.h> #include <asm/errno.h> #include <misc/cxl-base.h> +#include <linux/of_platform.h> #include "cxl.h" /* protected by rcu */ @@ -84,3 +85,34 @@ void unregister_cxl_calls(struct cxl_calls *calls) synchronize_rcu(); } EXPORT_SYMBOL_GPL(unregister_cxl_calls); + +int cxl_update_properties(struct device_node *dn, + struct property *new_prop) +{ + return of_update_property(dn, new_prop); +} +EXPORT_SYMBOL_GPL(cxl_update_properties); + +static int __init cxl_base_init(void) +{ + struct device_node *np = NULL; + struct platform_device *dev; + int count = 0; + + /* + * Scan for compatible devices in guest only + */ + if (cpu_has_feature(CPU_FTR_HVMODE)) + return 0; + + while ((np = of_find_compatible_node(np, NULL, + "ibm,coherent-platform-facility"))) { + dev = of_platform_device_create(np, NULL, NULL); + if (dev) + count++; + } + pr_devel("Found %d cxl device(s)\n", count); + return 0; +} + +module_init(cxl_base_init); diff --git a/drivers/misc/cxl/context.c b/drivers/misc/cxl/context.c index 262b88e..10370f2 100644 --- a/drivers/misc/cxl/context.c +++ b/drivers/misc/cxl/context.c @@ -95,7 +95,12 @@ int cxl_context_init(struct cxl_context *ctx, struct cxl_afu *afu, bool master, return i; ctx->pe = i; - ctx->elem = &ctx->afu->spa[i]; + if (cpu_has_feature(CPU_FTR_HVMODE)) { + ctx->elem = &ctx->afu->native->spa[i]; + ctx->external_pe = ctx->pe; + } else { + ctx->external_pe = -1; /* assigned when attaching */ + } ctx->pe_inserted = false; /* @@ -214,8 +219,8 @@ int __detach_context(struct cxl_context *ctx) /* Only warn if we detached while the link was OK. * If detach fails when hw is down, we don't care. */ - WARN_ON(cxl_detach_process(ctx) && - cxl_adapter_link_ok(ctx->afu->adapter)); + WARN_ON(cxl_ops->detach_process(ctx) && + cxl_ops->link_ok(ctx->afu->adapter, ctx->afu)); flush_work(&ctx->fault_work); /* Only needed for dedicated process */ /* release the reference to the group leader and mm handling pid */ diff --git a/drivers/misc/cxl/cxl.h b/drivers/misc/cxl/cxl.h index a521bc7..38e21cf 100644 --- a/drivers/misc/cxl/cxl.h +++ b/drivers/misc/cxl/cxl.h @@ -324,6 +324,10 @@ static const cxl_p2n_reg_t CXL_PSL_WED_An = {0x0A0}; #define CXL_MODE_TIME_SLICED 0x4 #define CXL_SUPPORTED_MODES (CXL_MODE_DEDICATED | CXL_MODE_DIRECTED) +#define CXL_DEV_MINORS 13 /* 1 control + 4 AFUs * 3 (dedicated/master/shared) */ +#define CXL_CARD_MINOR(adapter) (adapter->adapter_num * CXL_DEV_MINORS) +#define CXL_DEVT_ADAPTER(dev) (MINOR(dev) / CXL_DEV_MINORS) + enum cxl_context_status { CLOSED, OPENED, @@ -336,6 +340,12 @@ enum prefault_modes { CXL_PREFAULT_ALL, }; +enum cxl_attrs { + CXL_ADAPTER_ATTRS, + CXL_AFU_MASTER_ATTRS, + CXL_AFU_ATTRS, +}; + struct cxl_sste { __be64 esid_data; __be64 vsid_data; @@ -344,18 +354,46 @@ struct cxl_sste { #define to_cxl_adapter(d) container_of(d, struct cxl, dev) #define to_cxl_afu(d) container_of(d, struct cxl_afu, dev) -struct cxl_afu { +struct cxl_afu_native { + void __iomem *p1n_mmio; + void __iomem *afu_desc_mmio; irq_hw_number_t psl_hwirq; + unsigned int psl_virq; + struct mutex spa_mutex; + /* + * Only the first part of the SPA is used for the process element + * linked list. The only other part that software needs to worry about + * is sw_command_status, which we store a separate pointer to. + * Everything else in the SPA is only used by hardware + */ + struct cxl_process_element *spa; + __be64 *sw_command_status; + unsigned int spa_size; + int spa_order; + int spa_max_procs; + u64 pp_offset; +}; + +struct cxl_afu_guest { + u64 handle; + phys_addr_t p2n_phys; + u64 p2n_size; + int max_ints; + struct mutex recovery_lock; + int previous_state; +}; + +struct cxl_afu { + struct cxl_afu_native *native; + struct cxl_afu_guest *guest; irq_hw_number_t serr_hwirq; - char *err_irq_name; - char *psl_irq_name; unsigned int serr_virq; - void __iomem *p1n_mmio; + char *psl_irq_name; + char *err_irq_name; void __iomem *p2n_mmio; phys_addr_t psn_phys; - u64 pp_offset; u64 pp_size; - void __iomem *afu_desc_mmio; + struct cxl *adapter; struct device dev; struct cdev afu_cdev_s, afu_cdev_m, afu_cdev_d; @@ -363,26 +401,12 @@ struct cxl_afu { struct idr contexts_idr; struct dentry *debugfs; struct mutex contexts_lock; - struct mutex spa_mutex; spinlock_t afu_cntl_lock; /* AFU error buffer fields and bin attribute for sysfs */ u64 eb_len, eb_offset; struct bin_attribute attr_eb; - /* - * Only the first part of the SPA is used for the process element - * linked list. The only other part that software needs to worry about - * is sw_command_status, which we store a separate pointer to. - * Everything else in the SPA is only used by hardware - */ - struct cxl_process_element *spa; - __be64 *sw_command_status; - unsigned int spa_size; - int spa_order; - int spa_max_procs; - unsigned int psl_virq; - /* pointer to the vphb */ struct pci_controller *phb; @@ -421,6 +445,12 @@ struct cxl_irq_name { char *name; }; +struct irq_avail { + irq_hw_number_t offset; + irq_hw_number_t range; + unsigned long *bitmap; +}; + /* * This is a cxl context. If the PSL is in dedicated mode, there will be one * of these per AFU. If in AFU directed there can be lots of these. @@ -476,7 +506,19 @@ struct cxl_context { struct cxl_process_element *elem; - int pe; /* process element handle */ + /* + * pe is the process element handle, assigned by this driver when the + * context is initialized. + * + * external_pe is the PE shown outside of cxl. + * On bare-metal, pe=external_pe, because we decide what the handle is. + * In a guest, we only find out about the pe used by pHyp when the + * context is attached, and that's the value we want to report outside + * of cxl. + */ + int pe; + int external_pe; + u32 irq_count; bool pe_inserted; bool master; @@ -488,11 +530,34 @@ struct cxl_context { struct rcu_head rcu; }; -struct cxl { +struct cxl_native { + u64 afu_desc_off; + u64 afu_desc_size; void __iomem *p1_mmio; void __iomem *p2_mmio; irq_hw_number_t err_hwirq; unsigned int err_virq; + u64 ps_off; +}; + +struct cxl_guest { + struct platform_device *pdev; + int irq_nranges; + struct cdev cdev; + irq_hw_number_t irq_base_offset; + struct irq_avail *irq_avail; + spinlock_t irq_alloc_lock; + u64 handle; + char *status; + u16 vendor; + u16 device; + u16 subsystem_vendor; + u16 subsystem; +}; + +struct cxl { + struct cxl_native *native; + struct cxl_guest *guest; spinlock_t afu_list_lock; struct cxl_afu *afu[CXL_MAX_SLICES]; struct device dev; @@ -503,9 +568,6 @@ struct cxl { struct bin_attribute cxl_attr; int adapter_num; int user_irqs; - u64 afu_desc_off; - u64 afu_desc_size; - u64 ps_off; u64 ps_size; u16 psl_rev; u16 base_image; @@ -519,13 +581,15 @@ struct cxl { bool perst_same_image; }; -int cxl_alloc_one_irq(struct cxl *adapter); -void cxl_release_one_irq(struct cxl *adapter, int hwirq); -int cxl_alloc_irq_ranges(struct cxl_irq_ranges *irqs, struct cxl *adapter, unsigned int num); -void cxl_release_irq_ranges(struct cxl_irq_ranges *irqs, struct cxl *adapter); -int cxl_setup_irq(struct cxl *adapter, unsigned int hwirq, unsigned int virq); +int cxl_pci_alloc_one_irq(struct cxl *adapter); +void cxl_pci_release_one_irq(struct cxl *adapter, int hwirq); +int cxl_pci_alloc_irq_ranges(struct cxl_irq_ranges *irqs, struct cxl *adapter, unsigned int num); +void cxl_pci_release_irq_ranges(struct cxl_irq_ranges *irqs, struct cxl *adapter); +int cxl_pci_setup_irq(struct cxl *adapter, unsigned int hwirq, unsigned int virq); int cxl_update_image_control(struct cxl *adapter); -int cxl_reset(struct cxl *adapter); +int cxl_pci_reset(struct cxl *adapter); +void cxl_pci_release_afu(struct device *dev); +ssize_t cxl_pci_read_adapter_vpd(struct cxl *adapter, void *buf, size_t len); /* common == phyp + powernv */ struct cxl_process_element_common { @@ -555,29 +619,32 @@ struct cxl_process_element { __be32 software_state; } __packed; -static inline bool cxl_adapter_link_ok(struct cxl *cxl) +static inline bool cxl_adapter_link_ok(struct cxl *cxl, struct cxl_afu *afu) { struct pci_dev *pdev; - pdev = to_pci_dev(cxl->dev.parent); - return !pci_channel_offline(pdev); + if (cpu_has_feature(CPU_FTR_HVMODE)) { + pdev = to_pci_dev(cxl->dev.parent); + return !pci_channel_offline(pdev); + } + return true; } static inline void __iomem *_cxl_p1_addr(struct cxl *cxl, cxl_p1_reg_t reg) { WARN_ON(!cpu_has_feature(CPU_FTR_HVMODE)); - return cxl->p1_mmio + cxl_reg_off(reg); + return cxl->native->p1_mmio + cxl_reg_off(reg); } static inline void cxl_p1_write(struct cxl *cxl, cxl_p1_reg_t reg, u64 val) { - if (likely(cxl_adapter_link_ok(cxl))) + if (likely(cxl_adapter_link_ok(cxl, NULL))) out_be64(_cxl_p1_addr(cxl, reg), val); } static inline u64 cxl_p1_read(struct cxl *cxl, cxl_p1_reg_t reg) { - if (likely(cxl_adapter_link_ok(cxl))) + if (likely(cxl_adapter_link_ok(cxl, NULL))) return in_be64(_cxl_p1_addr(cxl, reg)); else return ~0ULL; @@ -586,18 +653,18 @@ static inline u64 cxl_p1_read(struct cxl *cxl, cxl_p1_reg_t reg) static inline void __iomem *_cxl_p1n_addr(struct cxl_afu *afu, cxl_p1n_reg_t reg) { WARN_ON(!cpu_has_feature(CPU_FTR_HVMODE)); - return afu->p1n_mmio + cxl_reg_off(reg); + return afu->native->p1n_mmio + cxl_reg_off(reg); } static inline void cxl_p1n_write(struct cxl_afu *afu, cxl_p1n_reg_t reg, u64 val) { - if (likely(cxl_adapter_link_ok(afu->adapter))) + if (likely(cxl_adapter_link_ok(afu->adapter, afu))) out_be64(_cxl_p1n_addr(afu, reg), val); } static inline u64 cxl_p1n_read(struct cxl_afu *afu, cxl_p1n_reg_t reg) { - if (likely(cxl_adapter_link_ok(afu->adapter))) + if (likely(cxl_adapter_link_ok(afu->adapter, afu))) return in_be64(_cxl_p1n_addr(afu, reg)); else return ~0ULL; @@ -610,39 +677,19 @@ static inline void __iomem *_cxl_p2n_addr(struct cxl_afu *afu, cxl_p2n_reg_t reg static inline void cxl_p2n_write(struct cxl_afu *afu, cxl_p2n_reg_t reg, u64 val) { - if (likely(cxl_adapter_link_ok(afu->adapter))) + if (likely(cxl_adapter_link_ok(afu->adapter, afu))) out_be64(_cxl_p2n_addr(afu, reg), val); } static inline u64 cxl_p2n_read(struct cxl_afu *afu, cxl_p2n_reg_t reg) { - if (likely(cxl_adapter_link_ok(afu->adapter))) + if (likely(cxl_adapter_link_ok(afu->adapter, afu))) return in_be64(_cxl_p2n_addr(afu, reg)); else return ~0ULL; } -static inline u64 cxl_afu_cr_read64(struct cxl_afu *afu, int cr, u64 off) -{ - if (likely(cxl_adapter_link_ok(afu->adapter))) - return in_le64((afu)->afu_desc_mmio + (afu)->crs_offset + - ((cr) * (afu)->crs_len) + (off)); - else - return ~0ULL; -} - -static inline u32 cxl_afu_cr_read32(struct cxl_afu *afu, int cr, u64 off) -{ - if (likely(cxl_adapter_link_ok(afu->adapter))) - return in_le32((afu)->afu_desc_mmio + (afu)->crs_offset + - ((cr) * (afu)->crs_len) + (off)); - else - return 0xffffffff; -} -u16 cxl_afu_cr_read16(struct cxl_afu *afu, int cr, u64 off); -u8 cxl_afu_cr_read8(struct cxl_afu *afu, int cr, u64 off); - -ssize_t cxl_afu_read_err_buffer(struct cxl_afu *afu, char *buf, +ssize_t cxl_pci_afu_read_err_buffer(struct cxl_afu *afu, char *buf, loff_t off, size_t count); @@ -652,13 +699,14 @@ struct cxl_calls { }; int register_cxl_calls(struct cxl_calls *calls); void unregister_cxl_calls(struct cxl_calls *calls); +int cxl_update_properties(struct device_node *dn, struct property *new_prop); -int cxl_alloc_adapter_nr(struct cxl *adapter); void cxl_remove_adapter_nr(struct cxl *adapter); int cxl_alloc_spa(struct cxl_afu *afu); void cxl_release_spa(struct cxl_afu *afu); +dev_t cxl_get_dev(void); int cxl_file_init(void); void cxl_file_exit(void); int cxl_register_adapter(struct cxl *adapter); @@ -679,21 +727,19 @@ void cxl_sysfs_afu_remove(struct cxl_afu *afu); int cxl_sysfs_afu_m_add(struct cxl_afu *afu); void cxl_sysfs_afu_m_remove(struct cxl_afu *afu); -int cxl_afu_activate_mode(struct cxl_afu *afu, int mode); -int _cxl_afu_deactivate_mode(struct cxl_afu *afu, int mode); -int cxl_afu_deactivate_mode(struct cxl_afu *afu); +struct cxl *cxl_alloc_adapter(void); +struct cxl_afu *cxl_alloc_afu(struct cxl *adapter, int slice); int cxl_afu_select_best_mode(struct cxl_afu *afu); -int cxl_register_psl_irq(struct cxl_afu *afu); -void cxl_release_psl_irq(struct cxl_afu *afu); -int cxl_register_psl_err_irq(struct cxl *adapter); -void cxl_release_psl_err_irq(struct cxl *adapter); -int cxl_register_serr_irq(struct cxl_afu *afu); -void cxl_release_serr_irq(struct cxl_afu *afu); +int cxl_native_register_psl_irq(struct cxl_afu *afu); +void cxl_native_release_psl_irq(struct cxl_afu *afu); +int cxl_native_register_psl_err_irq(struct cxl *adapter); +void cxl_native_release_psl_err_irq(struct cxl *adapter); +int cxl_native_register_serr_irq(struct cxl_afu *afu); +void cxl_native_release_serr_irq(struct cxl_afu *afu); int afu_register_irqs(struct cxl_context *ctx, u32 count); void afu_release_irqs(struct cxl_context *ctx, void *cookie); void afu_irq_name_free(struct cxl_context *ctx); -irqreturn_t cxl_slice_irq_err(int irq, void *data); int cxl_debugfs_init(void); void cxl_debugfs_exit(void); @@ -707,6 +753,7 @@ void cxl_prefault(struct cxl_context *ctx, u64 wed); struct cxl *get_cxl_adapter(int num); int cxl_alloc_sst(struct cxl_context *ctx); +void cxl_dump_debug_buffer(void *addr, size_t size); void init_cxl_native(void); @@ -720,40 +767,54 @@ unsigned int cxl_map_irq(struct cxl *adapter, irq_hw_number_t hwirq, void cxl_unmap_irq(unsigned int virq, void *cookie); int __detach_context(struct cxl_context *ctx); -/* This matches the layout of the H_COLLECT_CA_INT_INFO retbuf */ +/* + * This must match the layout of the H_COLLECT_CA_INT_INFO retbuf defined + * in PAPR. + * A word about endianness: a pointer to this structure is passed when + * calling the hcall. However, it is not a block of memory filled up by + * the hypervisor. The return values are found in registers, and copied + * one by one when returning from the hcall. See the end of the call to + * plpar_hcall9() in hvCall.S + * As a consequence: + * - we don't need to do any endianness conversion + * - the pid and tid are an exception. They are 32-bit values returned in + * the same 64-bit register. So we do need to worry about byte ordering. + */ struct cxl_irq_info { u64 dsisr; u64 dar; u64 dsr; +#ifndef CONFIG_CPU_LITTLE_ENDIAN u32 pid; u32 tid; +#else + u32 tid; + u32 pid; +#endif u64 afu_err; u64 errstat; - u64 padding[3]; /* to match the expected retbuf size for plpar_hcall9 */ + u64 proc_handle; + u64 padding[2]; /* to match the expected retbuf size for plpar_hcall9 */ }; void cxl_assign_psn_space(struct cxl_context *ctx); -int cxl_attach_process(struct cxl_context *ctx, bool kernel, u64 wed, - u64 amr); -int cxl_detach_process(struct cxl_context *ctx); - -int cxl_get_irq(struct cxl_afu *afu, struct cxl_irq_info *info); -int cxl_ack_irq(struct cxl_context *ctx, u64 tfc, u64 psl_reset_mask); +irqreturn_t cxl_irq(int irq, struct cxl_context *ctx, struct cxl_irq_info *irq_info); +int cxl_register_one_irq(struct cxl *adapter, irq_handler_t handler, + void *cookie, irq_hw_number_t *dest_hwirq, + unsigned int *dest_virq, const char *name); int cxl_check_error(struct cxl_afu *afu); int cxl_afu_slbia(struct cxl_afu *afu); int cxl_tlb_slb_invalidate(struct cxl *adapter); int cxl_afu_disable(struct cxl_afu *afu); -int __cxl_afu_reset(struct cxl_afu *afu); -int cxl_afu_check_and_enable(struct cxl_afu *afu); int cxl_psl_purge(struct cxl_afu *afu); void cxl_stop_trace(struct cxl *cxl); int cxl_pci_vphb_add(struct cxl_afu *afu); -void cxl_pci_vphb_reconfigure(struct cxl_afu *afu); void cxl_pci_vphb_remove(struct cxl_afu *afu); extern struct pci_driver cxl_pci_driver; +extern struct platform_driver cxl_of_driver; int afu_allocate_irqs(struct cxl_context *ctx, u32 count); int afu_open(struct inode *inode, struct file *file); @@ -764,4 +825,61 @@ unsigned int afu_poll(struct file *file, struct poll_table_struct *poll); ssize_t afu_read(struct file *file, char __user *buf, size_t count, loff_t *off); extern const struct file_operations afu_fops; +struct cxl *cxl_guest_init_adapter(struct device_node *np, struct platform_device *dev); +void cxl_guest_remove_adapter(struct cxl *adapter); +int cxl_of_read_adapter_handle(struct cxl *adapter, struct device_node *np); +int cxl_of_read_adapter_properties(struct cxl *adapter, struct device_node *np); +ssize_t cxl_guest_read_adapter_vpd(struct cxl *adapter, void *buf, size_t len); +ssize_t cxl_guest_read_afu_vpd(struct cxl_afu *afu, void *buf, size_t len); +int cxl_guest_init_afu(struct cxl *adapter, int slice, struct device_node *afu_np); +void cxl_guest_remove_afu(struct cxl_afu *afu); +int cxl_of_read_afu_handle(struct cxl_afu *afu, struct device_node *afu_np); +int cxl_of_read_afu_properties(struct cxl_afu *afu, struct device_node *afu_np); +int cxl_guest_add_chardev(struct cxl *adapter); +void cxl_guest_remove_chardev(struct cxl *adapter); +void cxl_guest_reload_module(struct cxl *adapter); +int cxl_of_probe(struct platform_device *pdev); + +struct cxl_backend_ops { + struct module *module; + int (*adapter_reset)(struct cxl *adapter); + int (*alloc_one_irq)(struct cxl *adapter); + void (*release_one_irq)(struct cxl *adapter, int hwirq); + int (*alloc_irq_ranges)(struct cxl_irq_ranges *irqs, + struct cxl *adapter, unsigned int num); + void (*release_irq_ranges)(struct cxl_irq_ranges *irqs, + struct cxl *adapter); + int (*setup_irq)(struct cxl *adapter, unsigned int hwirq, + unsigned int virq); + irqreturn_t (*handle_psl_slice_error)(struct cxl_context *ctx, + u64 dsisr, u64 errstat); + irqreturn_t (*psl_interrupt)(int irq, void *data); + int (*ack_irq)(struct cxl_context *ctx, u64 tfc, u64 psl_reset_mask); + int (*attach_process)(struct cxl_context *ctx, bool kernel, + u64 wed, u64 amr); + int (*detach_process)(struct cxl_context *ctx); + bool (*support_attributes)(const char *attr_name, enum cxl_attrs type); + bool (*link_ok)(struct cxl *cxl, struct cxl_afu *afu); + void (*release_afu)(struct device *dev); + ssize_t (*afu_read_err_buffer)(struct cxl_afu *afu, char *buf, + loff_t off, size_t count); + int (*afu_check_and_enable)(struct cxl_afu *afu); + int (*afu_activate_mode)(struct cxl_afu *afu, int mode); + int (*afu_deactivate_mode)(struct cxl_afu *afu, int mode); + int (*afu_reset)(struct cxl_afu *afu); + int (*afu_cr_read8)(struct cxl_afu *afu, int cr_idx, u64 offset, u8 *val); + int (*afu_cr_read16)(struct cxl_afu *afu, int cr_idx, u64 offset, u16 *val); + int (*afu_cr_read32)(struct cxl_afu *afu, int cr_idx, u64 offset, u32 *val); + int (*afu_cr_read64)(struct cxl_afu *afu, int cr_idx, u64 offset, u64 *val); + int (*afu_cr_write8)(struct cxl_afu *afu, int cr_idx, u64 offset, u8 val); + int (*afu_cr_write16)(struct cxl_afu *afu, int cr_idx, u64 offset, u16 val); + int (*afu_cr_write32)(struct cxl_afu *afu, int cr_idx, u64 offset, u32 val); + ssize_t (*read_adapter_vpd)(struct cxl *adapter, void *buf, size_t count); +}; +extern const struct cxl_backend_ops cxl_native_ops; +extern const struct cxl_backend_ops cxl_guest_ops; +extern const struct cxl_backend_ops *cxl_ops; + +/* check if the given pci_dev is on the the cxl vphb bus */ +bool cxl_pci_is_vphb_device(struct pci_dev *dev); #endif diff --git a/drivers/misc/cxl/debugfs.c b/drivers/misc/cxl/debugfs.c index 18df6f4..5751899 100644 --- a/drivers/misc/cxl/debugfs.c +++ b/drivers/misc/cxl/debugfs.c @@ -118,6 +118,10 @@ void cxl_debugfs_afu_remove(struct cxl_afu *afu) int __init cxl_debugfs_init(void) { struct dentry *ent; + + if (!cpu_has_feature(CPU_FTR_HVMODE)) + return 0; + ent = debugfs_create_dir("cxl", NULL); if (IS_ERR(ent)) return PTR_ERR(ent); diff --git a/drivers/misc/cxl/fault.c b/drivers/misc/cxl/fault.c index 81c3f75..9a8650b 100644 --- a/drivers/misc/cxl/fault.c +++ b/drivers/misc/cxl/fault.c @@ -101,7 +101,7 @@ static void cxl_ack_ae(struct cxl_context *ctx) { unsigned long flags; - cxl_ack_irq(ctx, CXL_PSL_TFC_An_AE, 0); + cxl_ops->ack_irq(ctx, CXL_PSL_TFC_An_AE, 0); spin_lock_irqsave(&ctx->lock, flags); ctx->pending_fault = true; @@ -125,7 +125,7 @@ static int cxl_handle_segment_miss(struct cxl_context *ctx, else { mb(); /* Order seg table write to TFC MMIO write */ - cxl_ack_irq(ctx, CXL_PSL_TFC_An_R, 0); + cxl_ops->ack_irq(ctx, CXL_PSL_TFC_An_R, 0); } return IRQ_HANDLED; @@ -163,7 +163,7 @@ static void cxl_handle_page_fault(struct cxl_context *ctx, local_irq_restore(flags); pr_devel("Page fault successfully handled for pe: %i!\n", ctx->pe); - cxl_ack_irq(ctx, CXL_PSL_TFC_An_R, 0); + cxl_ops->ack_irq(ctx, CXL_PSL_TFC_An_R, 0); } /* @@ -254,14 +254,17 @@ void cxl_handle_fault(struct work_struct *fault_work) u64 dar = ctx->dar; struct mm_struct *mm = NULL; - if (cxl_p2n_read(ctx->afu, CXL_PSL_DSISR_An) != dsisr || - cxl_p2n_read(ctx->afu, CXL_PSL_DAR_An) != dar || - cxl_p2n_read(ctx->afu, CXL_PSL_PEHandle_An) != ctx->pe) { - /* Most likely explanation is harmless - a dedicated process - * has detached and these were cleared by the PSL purge, but - * warn about it just in case */ - dev_notice(&ctx->afu->dev, "cxl_handle_fault: Translation fault regs changed\n"); - return; + if (cpu_has_feature(CPU_FTR_HVMODE)) { + if (cxl_p2n_read(ctx->afu, CXL_PSL_DSISR_An) != dsisr || + cxl_p2n_read(ctx->afu, CXL_PSL_DAR_An) != dar || + cxl_p2n_read(ctx->afu, CXL_PSL_PEHandle_An) != ctx->pe) { + /* Most likely explanation is harmless - a dedicated + * process has detached and these were cleared by the + * PSL purge, but warn about it just in case + */ + dev_notice(&ctx->afu->dev, "cxl_handle_fault: Translation fault regs changed\n"); + return; + } } /* Early return if the context is being / has been detached */ diff --git a/drivers/misc/cxl/file.c b/drivers/misc/cxl/file.c index 783337d..eec468f 100644 --- a/drivers/misc/cxl/file.c +++ b/drivers/misc/cxl/file.c @@ -26,9 +26,7 @@ #include "trace.h" #define CXL_NUM_MINORS 256 /* Total to reserve */ -#define CXL_DEV_MINORS 13 /* 1 control + 4 AFUs * 3 (dedicated/master/shared) */ -#define CXL_CARD_MINOR(adapter) (adapter->adapter_num * CXL_DEV_MINORS) #define CXL_AFU_MINOR_D(afu) (CXL_CARD_MINOR(afu->adapter) + 1 + (3 * afu->slice)) #define CXL_AFU_MINOR_M(afu) (CXL_AFU_MINOR_D(afu) + 1) #define CXL_AFU_MINOR_S(afu) (CXL_AFU_MINOR_D(afu) + 2) @@ -36,7 +34,6 @@ #define CXL_AFU_MKDEV_M(afu) MKDEV(MAJOR(cxl_dev), CXL_AFU_MINOR_M(afu)) #define CXL_AFU_MKDEV_S(afu) MKDEV(MAJOR(cxl_dev), CXL_AFU_MINOR_S(afu)) -#define CXL_DEVT_ADAPTER(dev) (MINOR(dev) / CXL_DEV_MINORS) #define CXL_DEVT_AFU(dev) ((MINOR(dev) % CXL_DEV_MINORS - 1) / 3) #define CXL_DEVT_IS_CARD(dev) (MINOR(dev) % CXL_DEV_MINORS == 0) @@ -79,7 +76,7 @@ static int __afu_open(struct inode *inode, struct file *file, bool master) if (!afu->current_mode) goto err_put_afu; - if (!cxl_adapter_link_ok(adapter)) { + if (!cxl_ops->link_ok(adapter, afu)) { rc = -EIO; goto err_put_afu; } @@ -210,8 +207,8 @@ static long afu_ioctl_start_work(struct cxl_context *ctx, trace_cxl_attach(ctx, work.work_element_descriptor, work.num_interrupts, amr); - if ((rc = cxl_attach_process(ctx, false, work.work_element_descriptor, - amr))) { + if ((rc = cxl_ops->attach_process(ctx, false, work.work_element_descriptor, + amr))) { afu_release_irqs(ctx, ctx); goto out; } @@ -222,12 +219,13 @@ out: mutex_unlock(&ctx->status_mutex); return rc; } + static long afu_ioctl_process_element(struct cxl_context *ctx, int __user *upe) { pr_devel("%s: pe: %i\n", __func__, ctx->pe); - if (copy_to_user(upe, &ctx->pe, sizeof(__u32))) + if (copy_to_user(upe, &ctx->external_pe, sizeof(__u32))) return -EFAULT; return 0; @@ -259,7 +257,7 @@ long afu_ioctl(struct file *file, unsigned int cmd, unsigned long arg) if (ctx->status == CLOSED) return -EIO; - if (!cxl_adapter_link_ok(ctx->afu->adapter)) + if (!cxl_ops->link_ok(ctx->afu->adapter, ctx->afu)) return -EIO; pr_devel("afu_ioctl\n"); @@ -289,7 +287,7 @@ int afu_mmap(struct file *file, struct vm_area_struct *vm) if (ctx->status != STARTED) return -EIO; - if (!cxl_adapter_link_ok(ctx->afu->adapter)) + if (!cxl_ops->link_ok(ctx->afu->adapter, ctx->afu)) return -EIO; return cxl_context_iomap(ctx, vm); @@ -336,7 +334,7 @@ ssize_t afu_read(struct file *file, char __user *buf, size_t count, int rc; DEFINE_WAIT(wait); - if (!cxl_adapter_link_ok(ctx->afu->adapter)) + if (!cxl_ops->link_ok(ctx->afu->adapter, ctx->afu)) return -EIO; if (count < CXL_READ_MIN_SIZE) @@ -349,7 +347,7 @@ ssize_t afu_read(struct file *file, char __user *buf, size_t count, if (ctx_event_pending(ctx)) break; - if (!cxl_adapter_link_ok(ctx->afu->adapter)) { + if (!cxl_ops->link_ok(ctx->afu->adapter, ctx->afu)) { rc = -EIO; goto out; } @@ -445,7 +443,8 @@ static const struct file_operations afu_master_fops = { static char *cxl_devnode(struct device *dev, umode_t *mode) { - if (CXL_DEVT_IS_CARD(dev->devt)) { + if (cpu_has_feature(CPU_FTR_HVMODE) && + CXL_DEVT_IS_CARD(dev->devt)) { /* * These minor numbers will eventually be used to program the * PSL and AFUs once we have dynamic reprogramming support @@ -546,6 +545,11 @@ int cxl_register_adapter(struct cxl *adapter) return device_register(&adapter->dev); } +dev_t cxl_get_dev(void) +{ + return cxl_dev; +} + int __init cxl_file_init(void) { int rc; diff --git a/drivers/misc/cxl/flash.c b/drivers/misc/cxl/flash.c new file mode 100644 index 0000000..68dd0b7 --- /dev/null +++ b/drivers/misc/cxl/flash.c @@ -0,0 +1,538 @@ +#include <linux/kernel.h> +#include <linux/fs.h> +#include <linux/semaphore.h> +#include <linux/slab.h> +#include <linux/uaccess.h> +#include <asm/rtas.h> + +#include "cxl.h" +#include "hcalls.h" + +#define DOWNLOAD_IMAGE 1 +#define VALIDATE_IMAGE 2 + +struct ai_header { + u16 version; + u8 reserved0[6]; + u16 vendor; + u16 device; + u16 subsystem_vendor; + u16 subsystem; + u64 image_offset; + u64 image_length; + u8 reserved1[96]; +}; + +static struct semaphore sem; +unsigned long *buffer[CXL_AI_MAX_ENTRIES]; +struct sg_list *le; +static u64 continue_token; +static unsigned int transfer; + +struct update_props_workarea { + __be32 phandle; + __be32 state; + __be64 reserved; + __be32 nprops; +} __packed; + +struct update_nodes_workarea { + __be32 state; + __be64 unit_address; + __be32 reserved; +} __packed; + +#define DEVICE_SCOPE 3 +#define NODE_ACTION_MASK 0xff000000 +#define NODE_COUNT_MASK 0x00ffffff +#define OPCODE_DELETE 0x01000000 +#define OPCODE_UPDATE 0x02000000 +#define OPCODE_ADD 0x03000000 + +static int rcall(int token, char *buf, s32 scope) +{ + int rc; + + spin_lock(&rtas_data_buf_lock); + + memcpy(rtas_data_buf, buf, RTAS_DATA_BUF_SIZE); + rc = rtas_call(token, 2, 1, NULL, rtas_data_buf, scope); + memcpy(buf, rtas_data_buf, RTAS_DATA_BUF_SIZE); + + spin_unlock(&rtas_data_buf_lock); + return rc; +} + +static int update_property(struct device_node *dn, const char *name, + u32 vd, char *value) +{ + struct property *new_prop; + u32 *val; + int rc; + + new_prop = kzalloc(sizeof(*new_prop), GFP_KERNEL); + if (!new_prop) + return -ENOMEM; + + new_prop->name = kstrdup(name, GFP_KERNEL); + if (!new_prop->name) { + kfree(new_prop); + return -ENOMEM; + } + + new_prop->length = vd; + new_prop->value = kzalloc(new_prop->length, GFP_KERNEL); + if (!new_prop->value) { + kfree(new_prop->name); + kfree(new_prop); + return -ENOMEM; + } + memcpy(new_prop->value, value, vd); + + val = (u32 *)new_prop->value; + rc = cxl_update_properties(dn, new_prop); + pr_devel("%s: update property (%s, length: %i, value: %#x)\n", + dn->name, name, vd, be32_to_cpu(*val)); + + if (rc) { + kfree(new_prop->name); + kfree(new_prop->value); + kfree(new_prop); + } + return rc; +} + +static int update_node(__be32 phandle, s32 scope) +{ + struct update_props_workarea *upwa; + struct device_node *dn; + int i, rc, ret; + char *prop_data; + char *buf; + int token; + u32 nprops; + u32 vd; + + token = rtas_token("ibm,update-properties"); + if (token == RTAS_UNKNOWN_SERVICE) + return -EINVAL; + + buf = kzalloc(RTAS_DATA_BUF_SIZE, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + dn = of_find_node_by_phandle(be32_to_cpu(phandle)); + if (!dn) { + kfree(buf); + return -ENOENT; + } + + upwa = (struct update_props_workarea *)&buf[0]; + upwa->phandle = phandle; + do { + rc = rcall(token, buf, scope); + if (rc < 0) + break; + + prop_data = buf + sizeof(*upwa); + nprops = be32_to_cpu(upwa->nprops); + + if (*prop_data == 0) { + prop_data++; + vd = be32_to_cpu(*(__be32 *)prop_data); + prop_data += vd + sizeof(vd); + nprops--; + } + + for (i = 0; i < nprops; i++) { + char *prop_name; + + prop_name = prop_data; + prop_data += strlen(prop_name) + 1; + vd = be32_to_cpu(*(__be32 *)prop_data); + prop_data += sizeof(vd); + + if ((vd != 0x00000000) && (vd != 0x80000000)) { + ret = update_property(dn, prop_name, vd, + prop_data); + if (ret) + pr_err("cxl: Could not update property %s - %i\n", + prop_name, ret); + + prop_data += vd; + } + } + } while (rc == 1); + + of_node_put(dn); + kfree(buf); + return rc; +} + +static int update_devicetree(struct cxl *adapter, s32 scope) +{ + struct update_nodes_workarea *unwa; + u32 action, node_count; + int token, rc, i; + __be32 *data, drc_index, phandle; + char *buf; + + token = rtas_token("ibm,update-nodes"); + if (token == RTAS_UNKNOWN_SERVICE) + return -EINVAL; + + buf = kzalloc(RTAS_DATA_BUF_SIZE, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + unwa = (struct update_nodes_workarea *)&buf[0]; + unwa->unit_address = cpu_to_be64(adapter->guest->handle); + do { + rc = rcall(token, buf, scope); + if (rc && rc != 1) + break; + + data = (__be32 *)buf + 4; + while (be32_to_cpu(*data) & NODE_ACTION_MASK) { + action = be32_to_cpu(*data) & NODE_ACTION_MASK; + node_count = be32_to_cpu(*data) & NODE_COUNT_MASK; + pr_devel("device reconfiguration - action: %#x, nodes: %#x\n", + action, node_count); + data++; + + for (i = 0; i < node_count; i++) { + phandle = *data++; + + switch (action) { + case OPCODE_DELETE: + /* nothing to do */ + break; + case OPCODE_UPDATE: + update_node(phandle, scope); + break; + case OPCODE_ADD: + /* nothing to do, just move pointer */ + drc_index = *data++; + break; + } + } + } + } while (rc == 1); + + kfree(buf); + return 0; +} + +static int handle_image(struct cxl *adapter, int operation, + long (*fct)(u64, u64, u64, u64 *), + struct cxl_adapter_image *ai) +{ + size_t mod, s_copy, len_chunk = 0; + struct ai_header *header = NULL; + unsigned int entries = 0, i; + void *dest, *from; + int rc = 0, need_header; + + /* base adapter image header */ + need_header = (ai->flags & CXL_AI_NEED_HEADER); + if (need_header) { + header = kzalloc(sizeof(struct ai_header), GFP_KERNEL); + if (!header) + return -ENOMEM; + header->version = cpu_to_be16(1); + header->vendor = cpu_to_be16(adapter->guest->vendor); + header->device = cpu_to_be16(adapter->guest->device); + header->subsystem_vendor = cpu_to_be16(adapter->guest->subsystem_vendor); + header->subsystem = cpu_to_be16(adapter->guest->subsystem); + header->image_offset = cpu_to_be64(CXL_AI_HEADER_SIZE); + header->image_length = cpu_to_be64(ai->len_image); + } + + /* number of entries in the list */ + len_chunk = ai->len_data; + if (need_header) + len_chunk += CXL_AI_HEADER_SIZE; + + entries = len_chunk / CXL_AI_BUFFER_SIZE; + mod = len_chunk % CXL_AI_BUFFER_SIZE; + if (mod) + entries++; + + if (entries > CXL_AI_MAX_ENTRIES) { + rc = -EINVAL; + goto err; + } + + /* < -- MAX_CHUNK_SIZE = 4096 * 256 = 1048576 bytes --> + * chunk 0 ---------------------------------------------------- + * | header | data | + * ---------------------------------------------------- + * chunk 1 ---------------------------------------------------- + * | data | + * ---------------------------------------------------- + * .... + * chunk n ---------------------------------------------------- + * | data | + * ---------------------------------------------------- + */ + from = (void *) ai->data; + for (i = 0; i < entries; i++) { + dest = buffer[i]; + s_copy = CXL_AI_BUFFER_SIZE; + + if ((need_header) && (i == 0)) { + /* add adapter image header */ + memcpy(buffer[i], header, sizeof(struct ai_header)); + s_copy = CXL_AI_BUFFER_SIZE - CXL_AI_HEADER_SIZE; + dest += CXL_AI_HEADER_SIZE; /* image offset */ + } + if ((i == (entries - 1)) && mod) + s_copy = mod; + + /* copy data */ + if (copy_from_user(dest, from, s_copy)) + goto err; + + /* fill in the list */ + le[i].phys_addr = cpu_to_be64(virt_to_phys(buffer[i])); + le[i].len = cpu_to_be64(CXL_AI_BUFFER_SIZE); + if ((i == (entries - 1)) && mod) + le[i].len = cpu_to_be64(mod); + from += s_copy; + } + pr_devel("%s (op: %i, need header: %i, entries: %i, token: %#llx)\n", + __func__, operation, need_header, entries, continue_token); + + /* + * download/validate the adapter image to the coherent + * platform facility + */ + rc = fct(adapter->guest->handle, virt_to_phys(le), entries, + &continue_token); + if (rc == 0) /* success of download/validation operation */ + continue_token = 0; + +err: + kfree(header); + + return rc; +} + +static int transfer_image(struct cxl *adapter, int operation, + struct cxl_adapter_image *ai) +{ + int rc = 0; + int afu; + + switch (operation) { + case DOWNLOAD_IMAGE: + rc = handle_image(adapter, operation, + &cxl_h_download_adapter_image, ai); + if (rc < 0) { + pr_devel("resetting adapter\n"); + cxl_h_reset_adapter(adapter->guest->handle); + } + return rc; + + case VALIDATE_IMAGE: + rc = handle_image(adapter, operation, + &cxl_h_validate_adapter_image, ai); + if (rc < 0) { + pr_devel("resetting adapter\n"); + cxl_h_reset_adapter(adapter->guest->handle); + return rc; + } + if (rc == 0) { + pr_devel("remove curent afu\n"); + for (afu = 0; afu < adapter->slices; afu++) + cxl_guest_remove_afu(adapter->afu[afu]); + + pr_devel("resetting adapter\n"); + cxl_h_reset_adapter(adapter->guest->handle); + + /* The entire image has now been + * downloaded and the validation has + * been successfully performed. + * After that, the partition should call + * ibm,update-nodes and + * ibm,update-properties to receive the + * current configuration + */ + rc = update_devicetree(adapter, DEVICE_SCOPE); + transfer = 1; + } + return rc; + } + + return -EINVAL; +} + +static long ioctl_transfer_image(struct cxl *adapter, int operation, + struct cxl_adapter_image __user *uai) +{ + struct cxl_adapter_image ai; + + pr_devel("%s\n", __func__); + + if (copy_from_user(&ai, uai, sizeof(struct cxl_adapter_image))) + return -EFAULT; + + /* + * Make sure reserved fields and bits are set to 0 + */ + if (ai.reserved1 || ai.reserved2 || ai.reserved3 || ai.reserved4 || + (ai.flags & ~CXL_AI_ALL)) + return -EINVAL; + + return transfer_image(adapter, operation, &ai); +} + +static int device_open(struct inode *inode, struct file *file) +{ + int adapter_num = CXL_DEVT_ADAPTER(inode->i_rdev); + struct cxl *adapter; + int rc = 0, i; + + pr_devel("in %s\n", __func__); + + BUG_ON(sizeof(struct ai_header) != CXL_AI_HEADER_SIZE); + + /* Allows one process to open the device by using a semaphore */ + if (down_interruptible(&sem) != 0) + return -EPERM; + + if (!(adapter = get_cxl_adapter(adapter_num))) + return -ENODEV; + + file->private_data = adapter; + continue_token = 0; + transfer = 0; + + for (i = 0; i < CXL_AI_MAX_ENTRIES; i++) + buffer[i] = NULL; + + /* aligned buffer containing list entries which describes up to + * 1 megabyte of data (256 entries of 4096 bytes each) + * Logical real address of buffer 0 - Buffer 0 length in bytes + * Logical real address of buffer 1 - Buffer 1 length in bytes + * Logical real address of buffer 2 - Buffer 2 length in bytes + * .... + * .... + * Logical real address of buffer N - Buffer N length in bytes + */ + le = (struct sg_list *)get_zeroed_page(GFP_KERNEL); + if (!le) { + rc = -ENOMEM; + goto err; + } + + for (i = 0; i < CXL_AI_MAX_ENTRIES; i++) { + buffer[i] = (unsigned long *)get_zeroed_page(GFP_KERNEL); + if (!buffer[i]) { + rc = -ENOMEM; + goto err1; + } + } + + return 0; + +err1: + for (i = 0; i < CXL_AI_MAX_ENTRIES; i++) { + if (buffer[i]) + free_page((unsigned long) buffer[i]); + } + + if (le) + free_page((unsigned long) le); +err: + put_device(&adapter->dev); + + return rc; +} + +static long device_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + struct cxl *adapter = file->private_data; + + pr_devel("in %s\n", __func__); + + if (cmd == CXL_IOCTL_DOWNLOAD_IMAGE) + return ioctl_transfer_image(adapter, + DOWNLOAD_IMAGE, + (struct cxl_adapter_image __user *)arg); + else if (cmd == CXL_IOCTL_VALIDATE_IMAGE) + return ioctl_transfer_image(adapter, + VALIDATE_IMAGE, + (struct cxl_adapter_image __user *)arg); + else + return -EINVAL; +} + +static long device_compat_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + return device_ioctl(file, cmd, arg); +} + +static int device_close(struct inode *inode, struct file *file) +{ + struct cxl *adapter = file->private_data; + int i; + + pr_devel("in %s\n", __func__); + + for (i = 0; i < CXL_AI_MAX_ENTRIES; i++) { + if (buffer[i]) + free_page((unsigned long) buffer[i]); + } + + if (le) + free_page((unsigned long) le); + + up(&sem); + put_device(&adapter->dev); + continue_token = 0; + + /* reload the module */ + if (transfer) + cxl_guest_reload_module(adapter); + else { + pr_devel("resetting adapter\n"); + cxl_h_reset_adapter(adapter->guest->handle); + } + + transfer = 0; + return 0; +} + +static const struct file_operations fops = { + .owner = THIS_MODULE, + .open = device_open, + .unlocked_ioctl = device_ioctl, + .compat_ioctl = device_compat_ioctl, + .release = device_close, +}; + +void cxl_guest_remove_chardev(struct cxl *adapter) +{ + cdev_del(&adapter->guest->cdev); +} + +int cxl_guest_add_chardev(struct cxl *adapter) +{ + dev_t devt; + int rc; + + devt = MKDEV(MAJOR(cxl_get_dev()), CXL_CARD_MINOR(adapter)); + cdev_init(&adapter->guest->cdev, &fops); + if ((rc = cdev_add(&adapter->guest->cdev, devt, 1))) { + dev_err(&adapter->dev, + "Unable to add chardev on adapter (card%i): %i\n", + adapter->adapter_num, rc); + goto err; + } + adapter->dev.devt = devt; + sema_init(&sem, 1); +err: + return rc; +} diff --git a/drivers/misc/cxl/guest.c b/drivers/misc/cxl/guest.c new file mode 100644 index 0000000..8213372 --- /dev/null +++ b/drivers/misc/cxl/guest.c @@ -0,0 +1,1177 @@ +/* + * Copyright 2015 IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/spinlock.h> +#include <linux/uaccess.h> +#include <linux/delay.h> + +#include "cxl.h" +#include "hcalls.h" +#include "trace.h" + +#define CXL_ERROR_DETECTED_EVENT 1 +#define CXL_SLOT_RESET_EVENT 2 +#define CXL_RESUME_EVENT 3 + +static void pci_error_handlers(struct cxl_afu *afu, + int bus_error_event, + pci_channel_state_t state) +{ + struct pci_dev *afu_dev; + + if (afu->phb == NULL) + return; + + list_for_each_entry(afu_dev, &afu->phb->bus->devices, bus_list) { + if (!afu_dev->driver) + continue; + + switch (bus_error_event) { + case CXL_ERROR_DETECTED_EVENT: + afu_dev->error_state = state; + + if (afu_dev->driver->err_handler && + afu_dev->driver->err_handler->error_detected) + afu_dev->driver->err_handler->error_detected(afu_dev, state); + break; + case CXL_SLOT_RESET_EVENT: + afu_dev->error_state = state; + + if (afu_dev->driver->err_handler && + afu_dev->driver->err_handler->slot_reset) + afu_dev->driver->err_handler->slot_reset(afu_dev); + break; + case CXL_RESUME_EVENT: + if (afu_dev->driver->err_handler && + afu_dev->driver->err_handler->resume) + afu_dev->driver->err_handler->resume(afu_dev); + break; + } + } +} + +static irqreturn_t guest_handle_psl_slice_error(struct cxl_context *ctx, u64 dsisr, + u64 errstat) +{ + pr_devel("in %s\n", __func__); + dev_crit(&ctx->afu->dev, "PSL ERROR STATUS: 0x%.16llx\n", errstat); + + return cxl_ops->ack_irq(ctx, 0, errstat); +} + +static ssize_t guest_collect_vpd(struct cxl *adapter, struct cxl_afu *afu, + void *buf, size_t len) +{ + unsigned int entries, mod; + unsigned long **vpd_buf = NULL; + struct sg_list *le; + int rc = 0, i, tocopy; + u64 out = 0; + + if (buf == NULL) + return -EINVAL; + + /* number of entries in the list */ + entries = len / SG_BUFFER_SIZE; + mod = len % SG_BUFFER_SIZE; + if (mod) + entries++; + + if (entries > SG_MAX_ENTRIES) { + entries = SG_MAX_ENTRIES; + len = SG_MAX_ENTRIES * SG_BUFFER_SIZE; + mod = 0; + } + + vpd_buf = kzalloc(entries * sizeof(unsigned long *), GFP_KERNEL); + if (!vpd_buf) + return -ENOMEM; + + le = (struct sg_list *)get_zeroed_page(GFP_KERNEL); + if (!le) { + rc = -ENOMEM; + goto err1; + } + + for (i = 0; i < entries; i++) { + vpd_buf[i] = (unsigned long *)get_zeroed_page(GFP_KERNEL); + if (!vpd_buf[i]) { + rc = -ENOMEM; + goto err2; + } + le[i].phys_addr = cpu_to_be64(virt_to_phys(vpd_buf[i])); + le[i].len = cpu_to_be64(SG_BUFFER_SIZE); + if ((i == (entries - 1)) && mod) + le[i].len = cpu_to_be64(mod); + } + + if (adapter) + rc = cxl_h_collect_vpd_adapter(adapter->guest->handle, + virt_to_phys(le), entries, &out); + else + rc = cxl_h_collect_vpd(afu->guest->handle, 0, + virt_to_phys(le), entries, &out); + pr_devel("length of available (entries: %i), vpd: %#llx\n", + entries, out); + + if (!rc) { + /* + * hcall returns in 'out' the size of available VPDs. + * It fills the buffer with as much data as possible. + */ + if (out < len) + len = out; + rc = len; + if (out) { + for (i = 0; i < entries; i++) { + if (len < SG_BUFFER_SIZE) + tocopy = len; + else + tocopy = SG_BUFFER_SIZE; + memcpy(buf, vpd_buf[i], tocopy); + buf += tocopy; + len -= tocopy; + } + } + } +err2: + for (i = 0; i < entries; i++) { + if (vpd_buf[i]) + free_page((unsigned long) vpd_buf[i]); + } + free_page((unsigned long) le); +err1: + kfree(vpd_buf); + return rc; +} + +static int guest_get_irq_info(struct cxl_context *ctx, struct cxl_irq_info *info) +{ + return cxl_h_collect_int_info(ctx->afu->guest->handle, ctx->process_token, info); +} + +static irqreturn_t guest_psl_irq(int irq, void *data) +{ + struct cxl_context *ctx = data; + struct cxl_irq_info irq_info; + int rc; + + pr_devel("%d: received PSL interrupt %i\n", ctx->pe, irq); + rc = guest_get_irq_info(ctx, &irq_info); + if (rc) { + WARN(1, "Unable to get IRQ info: %i\n", rc); + return IRQ_HANDLED; + } + + rc = cxl_irq(irq, ctx, &irq_info); + return rc; +} + +static int afu_read_error_state(struct cxl_afu *afu, int *state_out) +{ + u64 state; + int rc = 0; + + rc = cxl_h_read_error_state(afu->guest->handle, &state); + if (!rc) { + WARN_ON(state != H_STATE_NORMAL && + state != H_STATE_DISABLE && + state != H_STATE_TEMP_UNAVAILABLE && + state != H_STATE_PERM_UNAVAILABLE); + *state_out = state & 0xffffffff; + } + return rc; +} + +static irqreturn_t guest_slice_irq_err(int irq, void *data) +{ + struct cxl_afu *afu = data; + int rc; + u64 serr; + + WARN(irq, "CXL SLICE ERROR interrupt %i\n", irq); + rc = cxl_h_get_fn_error_interrupt(afu->guest->handle, &serr); + if (rc) { + dev_crit(&afu->dev, "Couldn't read PSL_SERR_An: %d\n", rc); + return IRQ_HANDLED; + } + dev_crit(&afu->dev, "PSL_SERR_An: 0x%.16llx\n", serr); + + rc = cxl_h_ack_fn_error_interrupt(afu->guest->handle, serr); + if (rc) + dev_crit(&afu->dev, "Couldn't ack slice error interrupt: %d\n", + rc); + + return IRQ_HANDLED; +} + + +static int irq_alloc_range(struct cxl *adapter, int len, int *irq) +{ + int i, n; + struct irq_avail *cur; + + for (i = 0; i < adapter->guest->irq_nranges; i++) { + cur = &adapter->guest->irq_avail[i]; + n = bitmap_find_next_zero_area(cur->bitmap, cur->range, + 0, len, 0); + if (n < cur->range) { + bitmap_set(cur->bitmap, n, len); + *irq = cur->offset + n; + pr_devel("guest: allocate IRQs %#x->%#x\n", + *irq, *irq + len - 1); + + return 0; + } + } + return -ENOSPC; +} + +static int irq_free_range(struct cxl *adapter, int irq, int len) +{ + int i, n; + struct irq_avail *cur; + + if (len == 0) + return -ENOENT; + + for (i = 0; i < adapter->guest->irq_nranges; i++) { + cur = &adapter->guest->irq_avail[i]; + if (irq >= cur->offset && + (irq + len) <= (cur->offset + cur->range)) { + n = irq - cur->offset; + bitmap_clear(cur->bitmap, n, len); + pr_devel("guest: release IRQs %#x->%#x\n", + irq, irq + len - 1); + return 0; + } + } + return -ENOENT; +} + +static int guest_reset(struct cxl *adapter) +{ + struct cxl_afu *afu = NULL; + int i, rc; + + pr_devel("Adapter reset request\n"); + for (i = 0; i < adapter->slices; i++) { + if ((afu = adapter->afu[i])) { + pci_error_handlers(afu, CXL_ERROR_DETECTED_EVENT, + pci_channel_io_frozen); + cxl_context_detach_all(afu); + } + } + + rc = cxl_h_reset_adapter(adapter->guest->handle); + for (i = 0; i < adapter->slices; i++) { + if (!rc && (afu = adapter->afu[i])) { + pci_error_handlers(afu, CXL_SLOT_RESET_EVENT, + pci_channel_io_normal); + pci_error_handlers(afu, CXL_RESUME_EVENT, 0); + } + } + return rc; +} + +static int guest_alloc_one_irq(struct cxl *adapter) +{ + int irq; + + spin_lock(&adapter->guest->irq_alloc_lock); + if (irq_alloc_range(adapter, 1, &irq)) + irq = -ENOSPC; + spin_unlock(&adapter->guest->irq_alloc_lock); + return irq; +} + +static void guest_release_one_irq(struct cxl *adapter, int irq) +{ + spin_lock(&adapter->guest->irq_alloc_lock); + irq_free_range(adapter, irq, 1); + spin_unlock(&adapter->guest->irq_alloc_lock); +} + +static int guest_alloc_irq_ranges(struct cxl_irq_ranges *irqs, + struct cxl *adapter, unsigned int num) +{ + int i, try, irq; + + memset(irqs, 0, sizeof(struct cxl_irq_ranges)); + + spin_lock(&adapter->guest->irq_alloc_lock); + for (i = 0; i < CXL_IRQ_RANGES && num; i++) { + try = num; + while (try) { + if (irq_alloc_range(adapter, try, &irq) == 0) + break; + try /= 2; + } + if (!try) + goto error; + irqs->offset[i] = irq; + irqs->range[i] = try; + num -= try; + } + if (num) + goto error; + spin_unlock(&adapter->guest->irq_alloc_lock); + return 0; + +error: + for (i = 0; i < CXL_IRQ_RANGES; i++) + irq_free_range(adapter, irqs->offset[i], irqs->range[i]); + spin_unlock(&adapter->guest->irq_alloc_lock); + return -ENOSPC; +} + +static void guest_release_irq_ranges(struct cxl_irq_ranges *irqs, + struct cxl *adapter) +{ + int i; + + spin_lock(&adapter->guest->irq_alloc_lock); + for (i = 0; i < CXL_IRQ_RANGES; i++) + irq_free_range(adapter, irqs->offset[i], irqs->range[i]); + spin_unlock(&adapter->guest->irq_alloc_lock); +} + +static int guest_register_serr_irq(struct cxl_afu *afu) +{ + afu->err_irq_name = kasprintf(GFP_KERNEL, "cxl-%s-err", + dev_name(&afu->dev)); + if (!afu->err_irq_name) + return -ENOMEM; + + if (!(afu->serr_virq = cxl_map_irq(afu->adapter, afu->serr_hwirq, + guest_slice_irq_err, afu, afu->err_irq_name))) { + kfree(afu->err_irq_name); + afu->err_irq_name = NULL; + return -ENOMEM; + } + + return 0; +} + +static void guest_release_serr_irq(struct cxl_afu *afu) +{ + cxl_unmap_irq(afu->serr_virq, afu); + cxl_ops->release_one_irq(afu->adapter, afu->serr_hwirq); + kfree(afu->err_irq_name); +} + +static int guest_ack_irq(struct cxl_context *ctx, u64 tfc, u64 psl_reset_mask) +{ + return cxl_h_control_faults(ctx->afu->guest->handle, ctx->process_token, + tfc >> 32, (psl_reset_mask != 0)); +} + +static void disable_afu_irqs(struct cxl_context *ctx) +{ + irq_hw_number_t hwirq; + unsigned int virq; + int r, i; + + pr_devel("Disabling AFU(%d) interrupts\n", ctx->afu->slice); + for (r = 0; r < CXL_IRQ_RANGES; r++) { + hwirq = ctx->irqs.offset[r]; + for (i = 0; i < ctx->irqs.range[r]; hwirq++, i++) { + virq = irq_find_mapping(NULL, hwirq); + disable_irq(virq); + } + } +} + +static void enable_afu_irqs(struct cxl_context *ctx) +{ + irq_hw_number_t hwirq; + unsigned int virq; + int r, i; + + pr_devel("Enabling AFU(%d) interrupts\n", ctx->afu->slice); + for (r = 0; r < CXL_IRQ_RANGES; r++) { + hwirq = ctx->irqs.offset[r]; + for (i = 0; i < ctx->irqs.range[r]; hwirq++, i++) { + virq = irq_find_mapping(NULL, hwirq); + enable_irq(virq); + } + } +} + +static int _guest_afu_cr_readXX(int sz, struct cxl_afu *afu, int cr_idx, + u64 offset, u64 *val) +{ + unsigned long cr; + char c; + int rc = 0; + + if (afu->crs_len < sz) + return -ENOENT; + + if (unlikely(offset >= afu->crs_len)) + return -ERANGE; + + cr = get_zeroed_page(GFP_KERNEL); + if (!cr) + return -ENOMEM; + + rc = cxl_h_get_config(afu->guest->handle, cr_idx, offset, + virt_to_phys((void *)cr), sz); + if (rc) + goto err; + + switch (sz) { + case 1: + c = *((char *) cr); + *val = c; + break; + case 2: + *val = in_le16((u16 *)cr); + break; + case 4: + *val = in_le32((unsigned *)cr); + break; + case 8: + *val = in_le64((u64 *)cr); + break; + default: + WARN_ON(1); + } +err: + free_page(cr); + return rc; +} + +static int guest_afu_cr_read32(struct cxl_afu *afu, int cr_idx, u64 offset, + u32 *out) +{ + int rc; + u64 val; + + rc = _guest_afu_cr_readXX(4, afu, cr_idx, offset, &val); + if (!rc) + *out = (u32) val; + return rc; +} + +static int guest_afu_cr_read16(struct cxl_afu *afu, int cr_idx, u64 offset, + u16 *out) +{ + int rc; + u64 val; + + rc = _guest_afu_cr_readXX(2, afu, cr_idx, offset, &val); + if (!rc) + *out = (u16) val; + return rc; +} + +static int guest_afu_cr_read8(struct cxl_afu *afu, int cr_idx, u64 offset, + u8 *out) +{ + int rc; + u64 val; + + rc = _guest_afu_cr_readXX(1, afu, cr_idx, offset, &val); + if (!rc) + *out = (u8) val; + return rc; +} + +static int guest_afu_cr_read64(struct cxl_afu *afu, int cr_idx, u64 offset, + u64 *out) +{ + return _guest_afu_cr_readXX(8, afu, cr_idx, offset, out); +} + +static int guest_afu_cr_write32(struct cxl_afu *afu, int cr, u64 off, u32 in) +{ + /* config record is not writable from guest */ + return -EPERM; +} + +static int guest_afu_cr_write16(struct cxl_afu *afu, int cr, u64 off, u16 in) +{ + /* config record is not writable from guest */ + return -EPERM; +} + +static int guest_afu_cr_write8(struct cxl_afu *afu, int cr, u64 off, u8 in) +{ + /* config record is not writable from guest */ + return -EPERM; +} + +static int attach_afu_directed(struct cxl_context *ctx, u64 wed, u64 amr) +{ + struct cxl_process_element_hcall *elem; + struct cxl *adapter = ctx->afu->adapter; + const struct cred *cred; + u32 pid, idx; + int rc, r, i; + u64 mmio_addr, mmio_size; + __be64 flags = 0; + + /* Must be 8 byte aligned and cannot cross a 4096 byte boundary */ + if (!(elem = (struct cxl_process_element_hcall *) + get_zeroed_page(GFP_KERNEL))) + return -ENOMEM; + + elem->version = cpu_to_be64(CXL_PROCESS_ELEMENT_VERSION); + if (ctx->kernel) { + pid = 0; + flags |= CXL_PE_TRANSLATION_ENABLED; + flags |= CXL_PE_PRIVILEGED_PROCESS; + if (mfmsr() & MSR_SF) + flags |= CXL_PE_64_BIT; + } else { + pid = current->pid; + flags |= CXL_PE_PROBLEM_STATE; + flags |= CXL_PE_TRANSLATION_ENABLED; + if (!test_tsk_thread_flag(current, TIF_32BIT)) + flags |= CXL_PE_64_BIT; + cred = get_current_cred(); + if (uid_eq(cred->euid, GLOBAL_ROOT_UID)) + flags |= CXL_PE_PRIVILEGED_PROCESS; + put_cred(cred); + } + elem->flags = cpu_to_be64(flags); + elem->common.tid = cpu_to_be32(0); /* Unused */ + elem->common.pid = cpu_to_be32(pid); + elem->common.csrp = cpu_to_be64(0); /* disable */ + elem->common.aurp0 = cpu_to_be64(0); /* disable */ + elem->common.aurp1 = cpu_to_be64(0); /* disable */ + + cxl_prefault(ctx, wed); + + elem->common.sstp0 = cpu_to_be64(ctx->sstp0); + elem->common.sstp1 = cpu_to_be64(ctx->sstp1); + for (r = 0; r < CXL_IRQ_RANGES; r++) { + for (i = 0; i < ctx->irqs.range[r]; i++) { + if (r == 0 && i == 0) { + elem->pslVirtualIsn = cpu_to_be32(ctx->irqs.offset[0]); + } else { + idx = ctx->irqs.offset[r] + i - adapter->guest->irq_base_offset; + elem->applicationVirtualIsnBitmap[idx / 8] |= 0x80 >> (idx % 8); + } + } + } + elem->common.amr = cpu_to_be64(amr); + elem->common.wed = cpu_to_be64(wed); + + disable_afu_irqs(ctx); + + rc = cxl_h_attach_process(ctx->afu->guest->handle, elem, + &ctx->process_token, &mmio_addr, &mmio_size); + if (rc == H_SUCCESS) { + if (ctx->master || !ctx->afu->pp_psa) { + ctx->psn_phys = ctx->afu->psn_phys; + ctx->psn_size = ctx->afu->adapter->ps_size; + } else { + ctx->psn_phys = mmio_addr; + ctx->psn_size = mmio_size; + } + if (ctx->afu->pp_psa && mmio_size && + ctx->afu->pp_size == 0) { + /* + * There's no property in the device tree to read the + * pp_size. We only find out at the 1st attach. + * Compared to bare-metal, it is too late and we + * should really lock here. However, on powerVM, + * pp_size is really only used to display in /sys. + * Being discussed with pHyp for their next release. + */ + ctx->afu->pp_size = mmio_size; + } + /* from PAPR: process element is bytes 4-7 of process token */ + ctx->external_pe = ctx->process_token & 0xFFFFFFFF; + pr_devel("CXL pe=%i is known as %i for pHyp, mmio_size=%#llx", + ctx->pe, ctx->external_pe, ctx->psn_size); + ctx->pe_inserted = true; + enable_afu_irqs(ctx); + } + + free_page((u64)elem); + return rc; +} + +static int guest_attach_process(struct cxl_context *ctx, bool kernel, u64 wed, u64 amr) +{ + pr_devel("in %s\n", __func__); + + ctx->kernel = kernel; + if (ctx->afu->current_mode == CXL_MODE_DIRECTED) + return attach_afu_directed(ctx, wed, amr); + + /* dedicated mode not supported on FW840 */ + + return -EINVAL; +} + +static int detach_afu_directed(struct cxl_context *ctx) +{ + if (!ctx->pe_inserted) + return 0; + if (cxl_h_detach_process(ctx->afu->guest->handle, ctx->process_token)) + return -1; + return 0; +} + +static int guest_detach_process(struct cxl_context *ctx) +{ + pr_devel("in %s\n", __func__); + trace_cxl_detach(ctx); + + if (!cxl_ops->link_ok(ctx->afu->adapter, ctx->afu)) + return -EIO; + + if (ctx->afu->current_mode == CXL_MODE_DIRECTED) + return detach_afu_directed(ctx); + + return -EINVAL; +} + +static void guest_release_afu(struct device *dev) +{ + struct cxl_afu *afu = to_cxl_afu(dev); + + pr_devel("%s\n", __func__); + + idr_destroy(&afu->contexts_idr); + + kfree(afu->guest); + kfree(afu); +} + +ssize_t cxl_guest_read_afu_vpd(struct cxl_afu *afu, void *buf, size_t len) +{ + return guest_collect_vpd(NULL, afu, buf, len); +} + +#define ERR_BUFF_MAX_COPY_SIZE PAGE_SIZE +static ssize_t guest_afu_read_err_buffer(struct cxl_afu *afu, char *buf, + loff_t off, size_t count) +{ + void *tbuf = NULL; + int rc = 0; + + tbuf = (void *) get_zeroed_page(GFP_KERNEL); + if (!tbuf) + return -ENOMEM; + + rc = cxl_h_get_afu_err(afu->guest->handle, + off & 0x7, + virt_to_phys(tbuf), + count); + if (rc) + goto err; + + if (count > ERR_BUFF_MAX_COPY_SIZE) + count = ERR_BUFF_MAX_COPY_SIZE - (off & 0x7); + memcpy(buf, tbuf, count); +err: + free_page((u64)tbuf); + + return rc; +} + +static int guest_afu_check_and_enable(struct cxl_afu *afu) +{ + return 0; +} + +static bool guest_support_attributes(const char *attr_name, + enum cxl_attrs type) +{ + switch (type) { + case CXL_ADAPTER_ATTRS: + if ((strcmp(attr_name, "base_image") == 0) || + (strcmp(attr_name, "load_image_on_perst") == 0) || + (strcmp(attr_name, "perst_reloads_same_image") == 0) || + (strcmp(attr_name, "image_loaded") == 0)) + return false; + break; + case CXL_AFU_MASTER_ATTRS: + if ((strcmp(attr_name, "pp_mmio_off") == 0)) + return false; + break; + case CXL_AFU_ATTRS: + break; + default: + break; + } + + return true; +} + +static int activate_afu_directed(struct cxl_afu *afu) +{ + int rc; + + dev_info(&afu->dev, "Activating AFU(%d) directed mode\n", afu->slice); + + afu->current_mode = CXL_MODE_DIRECTED; + + afu->num_procs = afu->max_procs_virtualised; + + if ((rc = cxl_chardev_m_afu_add(afu))) + return rc; + + if ((rc = cxl_sysfs_afu_m_add(afu))) + goto err; + + if ((rc = cxl_chardev_s_afu_add(afu))) + goto err1; + + return 0; +err1: + cxl_sysfs_afu_m_remove(afu); +err: + cxl_chardev_afu_remove(afu); + return rc; +} + +static int guest_afu_activate_mode(struct cxl_afu *afu, int mode) +{ + if (!mode) + return 0; + if (!(mode & afu->modes_supported)) + return -EINVAL; + + if (mode == CXL_MODE_DIRECTED) + return activate_afu_directed(afu); + + if (mode == CXL_MODE_DEDICATED) + dev_err(&afu->dev, "Dedicated mode not supported\n"); + + return -EINVAL; +} + +static int deactivate_afu_directed(struct cxl_afu *afu) +{ + dev_info(&afu->dev, "Deactivating AFU(%d) directed mode\n", afu->slice); + + afu->current_mode = 0; + afu->num_procs = 0; + + cxl_sysfs_afu_m_remove(afu); + cxl_chardev_afu_remove(afu); + + cxl_ops->afu_reset(afu); + + return 0; +} + +static int guest_afu_deactivate_mode(struct cxl_afu *afu, int mode) +{ + if (!mode) + return 0; + if (!(mode & afu->modes_supported)) + return -EINVAL; + + if (mode == CXL_MODE_DIRECTED) + return deactivate_afu_directed(afu); + return 0; +} + +static int guest_afu_reset(struct cxl_afu *afu) +{ + pr_devel("AFU(%d) reset request\n", afu->slice); + return cxl_h_reset_afu(afu->guest->handle); +} + +static int guest_map_slice_regs(struct cxl_afu *afu) +{ + if (!(afu->p2n_mmio = ioremap(afu->guest->p2n_phys, afu->guest->p2n_size))) { + dev_err(&afu->dev, "Error mapping AFU(%d) MMIO regions\n", + afu->slice); + return -ENOMEM; + } + return 0; +} + +static void guest_unmap_slice_regs(struct cxl_afu *afu) +{ + if (afu->p2n_mmio) + iounmap(afu->p2n_mmio); +} + +static int afu_update_state(struct cxl_afu *afu) +{ + int rc, cur_state; + + rc = afu_read_error_state(afu, &cur_state); + if (rc) + return rc; + + if (afu->guest->previous_state == cur_state) + return 0; + + pr_devel("AFU(%d) update state to %#x\n", afu->slice, cur_state); + + switch (cur_state) { + case H_STATE_NORMAL: + afu->guest->previous_state = cur_state; + rc = 1; + break; + + case H_STATE_DISABLE: + pci_error_handlers(afu, CXL_ERROR_DETECTED_EVENT, + pci_channel_io_frozen); + + cxl_context_detach_all(afu); + if ((rc = cxl_ops->afu_reset(afu))) + pr_devel("reset hcall failed %d\n", rc); + + rc = afu_read_error_state(afu, &cur_state); + if (!rc && cur_state == H_STATE_NORMAL) { + pci_error_handlers(afu, CXL_SLOT_RESET_EVENT, + pci_channel_io_normal); + pci_error_handlers(afu, CXL_RESUME_EVENT, 0); + rc = 1; + } + afu->guest->previous_state = 0; + break; + + case H_STATE_TEMP_UNAVAILABLE: + afu->guest->previous_state = cur_state; + break; + + case H_STATE_PERM_UNAVAILABLE: + dev_err(&afu->dev, "AFU is in permanent error state\n"); + pci_error_handlers(afu, CXL_ERROR_DETECTED_EVENT, + pci_channel_io_perm_failure); + afu->guest->previous_state = cur_state; + break; + + default: + pr_err("Unexpected AFU(%d) error state: %#x\n", + afu->slice, cur_state); + return -EINVAL; + } + + return rc; +} + +static int afu_do_recovery(struct cxl_afu *afu) +{ + int rc; + + /* many threads can arrive here, in case of detach_all for example. + * Only one needs to drive the recovery + */ + if (mutex_trylock(&afu->guest->recovery_lock)) { + rc = afu_update_state(afu); + mutex_unlock(&afu->guest->recovery_lock); + return rc; + } + return 0; +} + +static bool guest_link_ok(struct cxl *cxl, struct cxl_afu *afu) +{ + int state; + + if (afu) { + if (afu_read_error_state(afu, &state) || + state != H_STATE_NORMAL) { + if (afu_do_recovery(afu) > 0) { + /* check again in case we've just fixed it */ + if (!afu_read_error_state(afu, &state) && + state == H_STATE_NORMAL) + return true; + } + return false; + } + } + + return true; +} + +static int afu_properties_look_ok(struct cxl_afu *afu) +{ + if (afu->pp_irqs < 0) { + dev_err(&afu->dev, "Unexpected per-process minimum interrupt value\n"); + return -EINVAL; + } + + if (afu->max_procs_virtualised < 1) { + dev_err(&afu->dev, "Unexpected max number of processes virtualised value\n"); + return -EINVAL; + } + + if (afu->crs_len < 0) { + dev_err(&afu->dev, "Unexpected configuration record size value\n"); + return -EINVAL; + } + + return 0; +} + +int cxl_guest_init_afu(struct cxl *adapter, int slice, struct device_node *afu_np) +{ + struct cxl_afu *afu; + bool free = true; + int rc; + + pr_devel("in %s - AFU(%d)\n", __func__, slice); + if (!(afu = cxl_alloc_afu(adapter, slice))) + return -ENOMEM; + + if (!(afu->guest = kzalloc(sizeof(struct cxl_afu_guest), GFP_KERNEL))) { + kfree(afu); + return -ENOMEM; + } + + mutex_init(&afu->guest->recovery_lock); + + if ((rc = dev_set_name(&afu->dev, "afu%i.%i", + adapter->adapter_num, + slice))) + goto err1; + + adapter->slices++; + + if ((rc = cxl_of_read_afu_handle(afu, afu_np))) + goto err1; + + if ((rc = cxl_ops->afu_reset(afu))) + goto err1; + + if ((rc = cxl_of_read_afu_properties(afu, afu_np))) + goto err1; + + if ((rc = afu_properties_look_ok(afu))) + goto err1; + + if ((rc = guest_map_slice_regs(afu))) + goto err1; + + if ((rc = guest_register_serr_irq(afu))) + goto err2; + + /* + * After we call this function we must not free the afu directly, even + * if it returns an error! + */ + if ((rc = cxl_register_afu(afu))) + goto err_put1; + + if ((rc = cxl_sysfs_afu_add(afu))) + goto err_put1; + + /* + * pHyp doesn't expose the programming models supported by the + * AFU. pHyp currently only supports directed mode. If it adds + * dedicated mode later, this version of cxl has no way to + * detect it. So we'll initialize the driver, but the first + * attach will fail. + * Being discussed with pHyp to do better (likely new property) + */ + if (afu->max_procs_virtualised == 1) + afu->modes_supported = CXL_MODE_DEDICATED; + else + afu->modes_supported = CXL_MODE_DIRECTED; + + if ((rc = cxl_afu_select_best_mode(afu))) + goto err_put2; + + adapter->afu[afu->slice] = afu; + + afu->enabled = true; + + if ((rc = cxl_pci_vphb_add(afu))) + dev_info(&afu->dev, "Can't register vPHB\n"); + + return 0; + +err_put2: + cxl_sysfs_afu_remove(afu); +err_put1: + device_unregister(&afu->dev); + free = false; + guest_release_serr_irq(afu); +err2: + guest_unmap_slice_regs(afu); +err1: + if (free) { + kfree(afu->guest); + kfree(afu); + } + return rc; +} + +void cxl_guest_remove_afu(struct cxl_afu *afu) +{ + pr_devel("in %s - AFU(%d)\n", __func__, afu->slice); + + if (!afu) + return; + + cxl_pci_vphb_remove(afu); + cxl_sysfs_afu_remove(afu); + + spin_lock(&afu->adapter->afu_list_lock); + afu->adapter->afu[afu->slice] = NULL; + spin_unlock(&afu->adapter->afu_list_lock); + + cxl_context_detach_all(afu); + cxl_ops->afu_deactivate_mode(afu, afu->current_mode); + guest_release_serr_irq(afu); + guest_unmap_slice_regs(afu); + + device_unregister(&afu->dev); +} + +static void free_adapter(struct cxl *adapter) +{ + struct irq_avail *cur; + int i; + + if (adapter->guest->irq_avail) { + for (i = 0; i < adapter->guest->irq_nranges; i++) { + cur = &adapter->guest->irq_avail[i]; + kfree(cur->bitmap); + } + kfree(adapter->guest->irq_avail); + } + kfree(adapter->guest->status); + cxl_remove_adapter_nr(adapter); + kfree(adapter->guest); + kfree(adapter); +} + +static int properties_look_ok(struct cxl *adapter) +{ + /* The absence of this property means that the operational + * status is unknown or okay + */ + if (strlen(adapter->guest->status) && + strcmp(adapter->guest->status, "okay")) { + pr_err("ABORTING:Bad operational status of the device\n"); + return -EINVAL; + } + + return 0; +} + +ssize_t cxl_guest_read_adapter_vpd(struct cxl *adapter, void *buf, size_t len) +{ + return guest_collect_vpd(adapter, NULL, buf, len); +} + +void cxl_guest_remove_adapter(struct cxl *adapter) +{ + pr_devel("in %s\n", __func__); + + cxl_sysfs_adapter_remove(adapter); + + cxl_guest_remove_chardev(adapter); + device_unregister(&adapter->dev); +} + +static void release_adapter(struct device *dev) +{ + free_adapter(to_cxl_adapter(dev)); +} + +struct cxl *cxl_guest_init_adapter(struct device_node *np, struct platform_device *pdev) +{ + struct cxl *adapter; + bool free = true; + int rc; + + if (!(adapter = cxl_alloc_adapter())) + return ERR_PTR(-ENOMEM); + + if (!(adapter->guest = kzalloc(sizeof(struct cxl_guest), GFP_KERNEL))) { + free_adapter(adapter); + return ERR_PTR(-ENOMEM); + } + + adapter->slices = 0; + adapter->guest->pdev = pdev; + adapter->dev.parent = &pdev->dev; + adapter->dev.release = release_adapter; + dev_set_drvdata(&pdev->dev, adapter); + + if ((rc = cxl_of_read_adapter_handle(adapter, np))) + goto err1; + + if ((rc = cxl_of_read_adapter_properties(adapter, np))) + goto err1; + + if ((rc = properties_look_ok(adapter))) + goto err1; + + if ((rc = cxl_guest_add_chardev(adapter))) + goto err1; + + /* + * After we call this function we must not free the adapter directly, + * even if it returns an error! + */ + if ((rc = cxl_register_adapter(adapter))) + goto err_put1; + + if ((rc = cxl_sysfs_adapter_add(adapter))) + goto err_put1; + + return adapter; + +err_put1: + device_unregister(&adapter->dev); + free = false; + cxl_guest_remove_chardev(adapter); +err1: + if (free) + free_adapter(adapter); + return ERR_PTR(rc); +} + +void cxl_guest_reload_module(struct cxl *adapter) +{ + struct platform_device *pdev; + + pdev = adapter->guest->pdev; + cxl_guest_remove_adapter(adapter); + + cxl_of_probe(pdev); +} + +const struct cxl_backend_ops cxl_guest_ops = { + .module = THIS_MODULE, + .adapter_reset = guest_reset, + .alloc_one_irq = guest_alloc_one_irq, + .release_one_irq = guest_release_one_irq, + .alloc_irq_ranges = guest_alloc_irq_ranges, + .release_irq_ranges = guest_release_irq_ranges, + .setup_irq = NULL, + .handle_psl_slice_error = guest_handle_psl_slice_error, + .psl_interrupt = guest_psl_irq, + .ack_irq = guest_ack_irq, + .attach_process = guest_attach_process, + .detach_process = guest_detach_process, + .support_attributes = guest_support_attributes, + .link_ok = guest_link_ok, + .release_afu = guest_release_afu, + .afu_read_err_buffer = guest_afu_read_err_buffer, + .afu_check_and_enable = guest_afu_check_and_enable, + .afu_activate_mode = guest_afu_activate_mode, + .afu_deactivate_mode = guest_afu_deactivate_mode, + .afu_reset = guest_afu_reset, + .afu_cr_read8 = guest_afu_cr_read8, + .afu_cr_read16 = guest_afu_cr_read16, + .afu_cr_read32 = guest_afu_cr_read32, + .afu_cr_read64 = guest_afu_cr_read64, + .afu_cr_write8 = guest_afu_cr_write8, + .afu_cr_write16 = guest_afu_cr_write16, + .afu_cr_write32 = guest_afu_cr_write32, + .read_adapter_vpd = cxl_guest_read_adapter_vpd, +}; diff --git a/drivers/misc/cxl/hcalls.c b/drivers/misc/cxl/hcalls.c new file mode 100644 index 0000000..d6d11f4 --- /dev/null +++ b/drivers/misc/cxl/hcalls.c @@ -0,0 +1,647 @@ +/* + * Copyright 2015 IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + + +#include <linux/compiler.h> +#include <linux/types.h> +#include <linux/delay.h> +#include <asm/byteorder.h> +#include "hcalls.h" +#include "trace.h" + +#define CXL_HCALL_TIMEOUT 60000 +#define CXL_HCALL_TIMEOUT_DOWNLOAD 120000 + +#define H_ATTACH_CA_PROCESS 0x344 +#define H_CONTROL_CA_FUNCTION 0x348 +#define H_DETACH_CA_PROCESS 0x34C +#define H_COLLECT_CA_INT_INFO 0x350 +#define H_CONTROL_CA_FAULTS 0x354 +#define H_DOWNLOAD_CA_FUNCTION 0x35C +#define H_DOWNLOAD_CA_FACILITY 0x364 +#define H_CONTROL_CA_FACILITY 0x368 + +#define H_CONTROL_CA_FUNCTION_RESET 1 /* perform a reset */ +#define H_CONTROL_CA_FUNCTION_SUSPEND_PROCESS 2 /* suspend a process from being executed */ +#define H_CONTROL_CA_FUNCTION_RESUME_PROCESS 3 /* resume a process to be executed */ +#define H_CONTROL_CA_FUNCTION_READ_ERR_STATE 4 /* read the error state */ +#define H_CONTROL_CA_FUNCTION_GET_AFU_ERR 5 /* collect the AFU error buffer */ +#define H_CONTROL_CA_FUNCTION_GET_CONFIG 6 /* collect configuration record */ +#define H_CONTROL_CA_FUNCTION_GET_DOWNLOAD_STATE 7 /* query to return download status */ +#define H_CONTROL_CA_FUNCTION_TERMINATE_PROCESS 8 /* terminate the process before completion */ +#define H_CONTROL_CA_FUNCTION_COLLECT_VPD 9 /* collect VPD */ +#define H_CONTROL_CA_FUNCTION_GET_FUNCTION_ERR_INT 11 /* read the function-wide error data based on an interrupt */ +#define H_CONTROL_CA_FUNCTION_ACK_FUNCTION_ERR_INT 12 /* acknowledge function-wide error data based on an interrupt */ +#define H_CONTROL_CA_FUNCTION_GET_ERROR_LOG 13 /* retrieve the Platform Log ID (PLID) of an error log */ + +#define H_CONTROL_CA_FAULTS_RESPOND_PSL 1 +#define H_CONTROL_CA_FAULTS_RESPOND_AFU 2 + +#define H_CONTROL_CA_FACILITY_RESET 1 /* perform a reset */ +#define H_CONTROL_CA_FACILITY_COLLECT_VPD 2 /* collect VPD */ + +#define H_DOWNLOAD_CA_FACILITY_DOWNLOAD 1 /* download adapter image */ +#define H_DOWNLOAD_CA_FACILITY_VALIDATE 2 /* validate adapter image */ + + +#define _CXL_LOOP_HCALL(call, rc, retbuf, fn, ...) \ + { \ + unsigned int delay, total_delay = 0; \ + u64 token = 0; \ + \ + memset(retbuf, 0, sizeof(retbuf)); \ + while (1) { \ + rc = call(fn, retbuf, __VA_ARGS__, token); \ + token = retbuf[0]; \ + if (rc != H_BUSY && !H_IS_LONG_BUSY(rc)) \ + break; \ + \ + if (rc == H_BUSY) \ + delay = 10; \ + else \ + delay = get_longbusy_msecs(rc); \ + \ + total_delay += delay; \ + if (total_delay > CXL_HCALL_TIMEOUT) { \ + WARN(1, "Warning: Giving up waiting for CXL hcall " \ + "%#x after %u msec\n", fn, total_delay); \ + rc = H_BUSY; \ + break; \ + } \ + msleep(delay); \ + } \ + } +#define CXL_H_WAIT_UNTIL_DONE(...) _CXL_LOOP_HCALL(plpar_hcall, __VA_ARGS__) +#define CXL_H9_WAIT_UNTIL_DONE(...) _CXL_LOOP_HCALL(plpar_hcall9, __VA_ARGS__) + +#define _PRINT_MSG(rc, format, ...) \ + { \ + if ((rc != H_SUCCESS) && (rc != H_CONTINUE)) \ + pr_err(format, __VA_ARGS__); \ + else \ + pr_devel(format, __VA_ARGS__); \ + } \ + + +static char *afu_op_names[] = { + "UNKNOWN_OP", /* 0 undefined */ + "RESET", /* 1 */ + "SUSPEND_PROCESS", /* 2 */ + "RESUME_PROCESS", /* 3 */ + "READ_ERR_STATE", /* 4 */ + "GET_AFU_ERR", /* 5 */ + "GET_CONFIG", /* 6 */ + "GET_DOWNLOAD_STATE", /* 7 */ + "TERMINATE_PROCESS", /* 8 */ + "COLLECT_VPD", /* 9 */ + "UNKNOWN_OP", /* 10 undefined */ + "GET_FUNCTION_ERR_INT", /* 11 */ + "ACK_FUNCTION_ERR_INT", /* 12 */ + "GET_ERROR_LOG", /* 13 */ +}; + +static char *control_adapter_op_names[] = { + "UNKNOWN_OP", /* 0 undefined */ + "RESET", /* 1 */ + "COLLECT_VPD", /* 2 */ +}; + +static char *download_op_names[] = { + "UNKNOWN_OP", /* 0 undefined */ + "DOWNLOAD", /* 1 */ + "VALIDATE", /* 2 */ +}; + +static char *op_str(unsigned int op, char *name_array[], int array_len) +{ + if (op >= array_len) + return "UNKNOWN_OP"; + return name_array[op]; +} + +#define OP_STR(op, name_array) op_str(op, name_array, ARRAY_SIZE(name_array)) + +#define OP_STR_AFU(op) OP_STR(op, afu_op_names) +#define OP_STR_CONTROL_ADAPTER(op) OP_STR(op, control_adapter_op_names) +#define OP_STR_DOWNLOAD_ADAPTER(op) OP_STR(op, download_op_names) + + +long cxl_h_attach_process(u64 unit_address, + struct cxl_process_element_hcall *element, + u64 *process_token, u64 *mmio_addr, u64 *mmio_size) +{ + unsigned long retbuf[PLPAR_HCALL_BUFSIZE]; + long rc; + + CXL_H_WAIT_UNTIL_DONE(rc, retbuf, H_ATTACH_CA_PROCESS, unit_address, virt_to_phys(element)); + _PRINT_MSG(rc, "cxl_h_attach_process(%#.16llx, %#.16lx): %li\n", + unit_address, virt_to_phys(element), rc); + trace_cxl_hcall_attach(unit_address, virt_to_phys(element), retbuf[0], retbuf[1], retbuf[2], rc); + + pr_devel("token: 0x%.8lx mmio_addr: 0x%lx mmio_size: 0x%lx\nProcess Element Structure:\n", + retbuf[0], retbuf[1], retbuf[2]); + cxl_dump_debug_buffer(element, sizeof(*element)); + + switch (rc) { + case H_SUCCESS: /* The process info is attached to the coherent platform function */ + *process_token = retbuf[0]; + if (mmio_addr) + *mmio_addr = retbuf[1]; + if (mmio_size) + *mmio_size = retbuf[2]; + return 0; + case H_PARAMETER: /* An incorrect parameter was supplied. */ + case H_FUNCTION: /* The function is not supported. */ + return -EINVAL; + case H_AUTHORITY: /* The partition does not have authority to perform this hcall */ + case H_RESOURCE: /* The coherent platform function does not have enough additional resource to attach the process */ + case H_HARDWARE: /* A hardware event prevented the attach operation */ + case H_STATE: /* The coherent platform function is not in a valid state */ + case H_BUSY: + return -EBUSY; + default: + WARN(1, "Unexpected return code: %lx", rc); + return -EINVAL; + } +} + +/** + * cxl_h_detach_process - Detach a process element from a coherent + * platform function. + */ +long cxl_h_detach_process(u64 unit_address, u64 process_token) +{ + unsigned long retbuf[PLPAR_HCALL_BUFSIZE]; + long rc; + + CXL_H_WAIT_UNTIL_DONE(rc, retbuf, H_DETACH_CA_PROCESS, unit_address, process_token); + _PRINT_MSG(rc, "cxl_h_detach_process(%#.16llx, 0x%.8llx): %li\n", unit_address, process_token, rc); + trace_cxl_hcall_detach(unit_address, process_token, rc); + + switch (rc) { + case H_SUCCESS: /* The process was detached from the coherent platform function */ + return 0; + case H_PARAMETER: /* An incorrect parameter was supplied. */ + return -EINVAL; + case H_AUTHORITY: /* The partition does not have authority to perform this hcall */ + case H_RESOURCE: /* The function has page table mappings for MMIO */ + case H_HARDWARE: /* A hardware event prevented the detach operation */ + case H_STATE: /* The coherent platform function is not in a valid state */ + case H_BUSY: + return -EBUSY; + default: + WARN(1, "Unexpected return code: %lx", rc); + return -EINVAL; + } +} + +/** + * cxl_h_control_function - This H_CONTROL_CA_FUNCTION hypervisor call allows + * the partition to manipulate or query + * certain coherent platform function behaviors. + */ +static long cxl_h_control_function(u64 unit_address, u64 op, + u64 p1, u64 p2, u64 p3, u64 p4, u64 *out) +{ + unsigned long retbuf[PLPAR_HCALL9_BUFSIZE]; + long rc; + + CXL_H9_WAIT_UNTIL_DONE(rc, retbuf, H_CONTROL_CA_FUNCTION, unit_address, op, p1, p2, p3, p4); + _PRINT_MSG(rc, "cxl_h_control_function(%#.16llx, %s(%#llx, %#llx, %#llx, %#llx, R4: %#lx)): %li\n", + unit_address, OP_STR_AFU(op), p1, p2, p3, p4, retbuf[0], rc); + trace_cxl_hcall_control_function(unit_address, OP_STR_AFU(op), p1, p2, p3, p4, retbuf[0], rc); + + switch (rc) { + case H_SUCCESS: /* The operation is completed for the coherent platform function */ + if ((op == H_CONTROL_CA_FUNCTION_GET_FUNCTION_ERR_INT || + op == H_CONTROL_CA_FUNCTION_READ_ERR_STATE || + op == H_CONTROL_CA_FUNCTION_COLLECT_VPD)) + *out = retbuf[0]; + return 0; + case H_PARAMETER: /* An incorrect parameter was supplied. */ + case H_FUNCTION: /* The function is not supported. */ + case H_NOT_FOUND: /* The operation supplied was not valid */ + case H_NOT_AVAILABLE: /* The operation cannot be performed because the AFU has not been downloaded */ + case H_SG_LIST: /* An block list entry was invalid */ + return -EINVAL; + case H_AUTHORITY: /* The partition does not have authority to perform this hcall */ + case H_RESOURCE: /* The function has page table mappings for MMIO */ + case H_HARDWARE: /* A hardware event prevented the attach operation */ + case H_STATE: /* The coherent platform function is not in a valid state */ + case H_BUSY: + return -EBUSY; + default: + WARN(1, "Unexpected return code: %lx", rc); + return -EINVAL; + } +} + +/** + * cxl_h_reset_afu - Perform a reset to the coherent platform function. + */ +long cxl_h_reset_afu(u64 unit_address) +{ + return cxl_h_control_function(unit_address, + H_CONTROL_CA_FUNCTION_RESET, + 0, 0, 0, 0, + NULL); +} + +/** + * cxl_h_suspend_process - Suspend a process from being executed + * Parameter1 = process-token as returned from H_ATTACH_CA_PROCESS when + * process was attached. + */ +long cxl_h_suspend_process(u64 unit_address, u64 process_token) +{ + return cxl_h_control_function(unit_address, + H_CONTROL_CA_FUNCTION_SUSPEND_PROCESS, + process_token, 0, 0, 0, + NULL); +} + +/** + * cxl_h_resume_process - Resume a process to be executed + * Parameter1 = process-token as returned from H_ATTACH_CA_PROCESS when + * process was attached. + */ +long cxl_h_resume_process(u64 unit_address, u64 process_token) +{ + return cxl_h_control_function(unit_address, + H_CONTROL_CA_FUNCTION_RESUME_PROCESS, + process_token, 0, 0, 0, + NULL); +} + +/** + * cxl_h_read_error_state - Checks the error state of the coherent + * platform function. + * R4 contains the error state + */ +long cxl_h_read_error_state(u64 unit_address, u64 *state) +{ + return cxl_h_control_function(unit_address, + H_CONTROL_CA_FUNCTION_READ_ERR_STATE, + 0, 0, 0, 0, + state); +} + +/** + * cxl_h_get_afu_err - collect the AFU error buffer + * Parameter1 = byte offset into error buffer to retrieve, valid values + * are between 0 and (ibm,error-buffer-size - 1) + * Parameter2 = 4K aligned real address of error buffer, to be filled in + * Parameter3 = length of error buffer, valid values are 4K or less + */ +long cxl_h_get_afu_err(u64 unit_address, u64 offset, + u64 buf_address, u64 len) +{ + return cxl_h_control_function(unit_address, + H_CONTROL_CA_FUNCTION_GET_AFU_ERR, + offset, buf_address, len, 0, + NULL); +} + +/** + * cxl_h_get_config - collect configuration record for the + * coherent platform function + * Parameter1 = # of configuration record to retrieve, valid values are + * between 0 and (ibm,#config-records - 1) + * Parameter2 = byte offset into configuration record to retrieve, + * valid values are between 0 and (ibm,config-record-size - 1) + * Parameter3 = 4K aligned real address of configuration record buffer, + * to be filled in + * Parameter4 = length of configuration buffer, valid values are 4K or less + */ +long cxl_h_get_config(u64 unit_address, u64 cr_num, u64 offset, + u64 buf_address, u64 len) +{ + return cxl_h_control_function(unit_address, + H_CONTROL_CA_FUNCTION_GET_CONFIG, + cr_num, offset, buf_address, len, + NULL); +} + +/** + * cxl_h_terminate_process - Terminate the process before completion + * Parameter1 = process-token as returned from H_ATTACH_CA_PROCESS when + * process was attached. + */ +long cxl_h_terminate_process(u64 unit_address, u64 process_token) +{ + return cxl_h_control_function(unit_address, + H_CONTROL_CA_FUNCTION_TERMINATE_PROCESS, + process_token, 0, 0, 0, + NULL); +} + +/** + * cxl_h_collect_vpd - Collect VPD for the coherent platform function. + * Parameter1 = # of VPD record to retrieve, valid values are between 0 + * and (ibm,#config-records - 1). + * Parameter2 = 4K naturally aligned real buffer containing block + * list entries + * Parameter3 = number of block list entries in the block list, valid + * values are between 0 and 256 + */ +long cxl_h_collect_vpd(u64 unit_address, u64 record, u64 list_address, + u64 num, u64 *out) +{ + return cxl_h_control_function(unit_address, + H_CONTROL_CA_FUNCTION_COLLECT_VPD, + record, list_address, num, 0, + out); +} + +/** + * cxl_h_get_fn_error_interrupt - Read the function-wide error data based on an interrupt + */ +long cxl_h_get_fn_error_interrupt(u64 unit_address, u64 *reg) +{ + return cxl_h_control_function(unit_address, + H_CONTROL_CA_FUNCTION_GET_FUNCTION_ERR_INT, + 0, 0, 0, 0, reg); +} + +/** + * cxl_h_ack_fn_error_interrupt - Acknowledge function-wide error data + * based on an interrupt + * Parameter1 = value to write to the function-wide error interrupt register + */ +long cxl_h_ack_fn_error_interrupt(u64 unit_address, u64 value) +{ + return cxl_h_control_function(unit_address, + H_CONTROL_CA_FUNCTION_ACK_FUNCTION_ERR_INT, + value, 0, 0, 0, + NULL); +} + +/** + * cxl_h_get_error_log - Retrieve the Platform Log ID (PLID) of + * an error log + */ +long cxl_h_get_error_log(u64 unit_address, u64 value) +{ + return cxl_h_control_function(unit_address, + H_CONTROL_CA_FUNCTION_GET_ERROR_LOG, + 0, 0, 0, 0, + NULL); +} + +/** + * cxl_h_collect_int_info - Collect interrupt info about a coherent + * platform function after an interrupt occurred. + */ +long cxl_h_collect_int_info(u64 unit_address, u64 process_token, + struct cxl_irq_info *info) +{ + long rc; + + BUG_ON(sizeof(*info) != sizeof(unsigned long[PLPAR_HCALL9_BUFSIZE])); + + rc = plpar_hcall9(H_COLLECT_CA_INT_INFO, (unsigned long *) info, + unit_address, process_token); + _PRINT_MSG(rc, "cxl_h_collect_int_info(%#.16llx, 0x%llx): %li\n", + unit_address, process_token, rc); + trace_cxl_hcall_collect_int_info(unit_address, process_token, rc); + + switch (rc) { + case H_SUCCESS: /* The interrupt info is returned in return registers. */ + pr_devel("dsisr:%#llx, dar:%#llx, dsr:%#llx, pid:%u, tid:%u, afu_err:%#llx, errstat:%#llx\n", + info->dsisr, info->dar, info->dsr, info->pid, + info->tid, info->afu_err, info->errstat); + return 0; + case H_PARAMETER: /* An incorrect parameter was supplied. */ + return -EINVAL; + case H_AUTHORITY: /* The partition does not have authority to perform this hcall. */ + case H_HARDWARE: /* A hardware event prevented the collection of the interrupt info.*/ + case H_STATE: /* The coherent platform function is not in a valid state to collect interrupt info. */ + return -EBUSY; + default: + WARN(1, "Unexpected return code: %lx", rc); + return -EINVAL; + } +} + +/** + * cxl_h_control_faults - Control the operation of a coherent platform + * function after a fault occurs. + * + * Parameters + * control-mask: value to control the faults + * looks like PSL_TFC_An shifted >> 32 + * reset-mask: mask to control reset of function faults + * Set reset_mask = 1 to reset PSL errors + */ +long cxl_h_control_faults(u64 unit_address, u64 process_token, + u64 control_mask, u64 reset_mask) +{ + unsigned long retbuf[PLPAR_HCALL_BUFSIZE]; + long rc; + + memset(retbuf, 0, sizeof(retbuf)); + + rc = plpar_hcall(H_CONTROL_CA_FAULTS, retbuf, unit_address, + H_CONTROL_CA_FAULTS_RESPOND_PSL, process_token, + control_mask, reset_mask); + _PRINT_MSG(rc, "cxl_h_control_faults(%#.16llx, 0x%llx, %#llx, %#llx): %li (%#lx)\n", + unit_address, process_token, control_mask, reset_mask, + rc, retbuf[0]); + trace_cxl_hcall_control_faults(unit_address, process_token, + control_mask, reset_mask, retbuf[0], rc); + + switch (rc) { + case H_SUCCESS: /* Faults were successfully controlled for the function. */ + return 0; + case H_PARAMETER: /* An incorrect parameter was supplied. */ + return -EINVAL; + case H_HARDWARE: /* A hardware event prevented the control of faults. */ + case H_STATE: /* The function was in an invalid state. */ + case H_AUTHORITY: /* The partition does not have authority to perform this hcall; the coherent platform facilities may need to be licensed. */ + return -EBUSY; + case H_FUNCTION: /* The function is not supported */ + case H_NOT_FOUND: /* The operation supplied was not valid */ + return -EINVAL; + default: + WARN(1, "Unexpected return code: %lx", rc); + return -EINVAL; + } +} + +/** + * cxl_h_control_facility - This H_CONTROL_CA_FACILITY hypervisor call + * allows the partition to manipulate or query + * certain coherent platform facility behaviors. + */ +static long cxl_h_control_facility(u64 unit_address, u64 op, + u64 p1, u64 p2, u64 p3, u64 p4, u64 *out) +{ + unsigned long retbuf[PLPAR_HCALL9_BUFSIZE]; + long rc; + + CXL_H9_WAIT_UNTIL_DONE(rc, retbuf, H_CONTROL_CA_FACILITY, unit_address, op, p1, p2, p3, p4); + _PRINT_MSG(rc, "cxl_h_control_facility(%#.16llx, %s(%#llx, %#llx, %#llx, %#llx, R4: %#lx)): %li\n", + unit_address, OP_STR_CONTROL_ADAPTER(op), p1, p2, p3, p4, retbuf[0], rc); + trace_cxl_hcall_control_facility(unit_address, OP_STR_CONTROL_ADAPTER(op), p1, p2, p3, p4, retbuf[0], rc); + + switch (rc) { + case H_SUCCESS: /* The operation is completed for the coherent platform facility */ + if (op == H_CONTROL_CA_FACILITY_COLLECT_VPD) + *out = retbuf[0]; + return 0; + case H_PARAMETER: /* An incorrect parameter was supplied. */ + case H_FUNCTION: /* The function is not supported. */ + case H_NOT_FOUND: /* The operation supplied was not valid */ + case H_NOT_AVAILABLE: /* The operation cannot be performed because the AFU has not been downloaded */ + case H_SG_LIST: /* An block list entry was invalid */ + return -EINVAL; + case H_AUTHORITY: /* The partition does not have authority to perform this hcall */ + case H_RESOURCE: /* The function has page table mappings for MMIO */ + case H_HARDWARE: /* A hardware event prevented the attach operation */ + case H_STATE: /* The coherent platform facility is not in a valid state */ + case H_BUSY: + return -EBUSY; + default: + WARN(1, "Unexpected return code: %lx", rc); + return -EINVAL; + } +} + +/** + * cxl_h_reset_adapter - Perform a reset to the coherent platform facility. + */ +long cxl_h_reset_adapter(u64 unit_address) +{ + return cxl_h_control_facility(unit_address, + H_CONTROL_CA_FACILITY_RESET, + 0, 0, 0, 0, + NULL); +} + +/** + * cxl_h_collect_vpd - Collect VPD for the coherent platform function. + * Parameter1 = 4K naturally aligned real buffer containing block + * list entries + * Parameter2 = number of block list entries in the block list, valid + * values are between 0 and 256 + */ +long cxl_h_collect_vpd_adapter(u64 unit_address, u64 list_address, + u64 num, u64 *out) +{ + return cxl_h_control_facility(unit_address, + H_CONTROL_CA_FACILITY_COLLECT_VPD, + list_address, num, 0, 0, + out); +} + +/** + * cxl_h_download_facility - This H_DOWNLOAD_CA_FACILITY + * hypervisor call provide platform support for + * downloading a base adapter image to the coherent + * platform facility, and for validating the entire + * image after the download. + * Parameters + * op: operation to perform to the coherent platform function + * Download: operation = 1, the base image in the coherent platform + * facility is first erased, and then + * programmed using the image supplied + * in the scatter/gather list. + * Validate: operation = 2, the base image in the coherent platform + * facility is compared with the image + * supplied in the scatter/gather list. + * list_address: 4K naturally aligned real buffer containing + * scatter/gather list entries. + * num: number of block list entries in the scatter/gather list. + */ +static long cxl_h_download_facility(u64 unit_address, u64 op, + u64 list_address, u64 num, + u64 *out) +{ + unsigned long retbuf[PLPAR_HCALL_BUFSIZE]; + unsigned int delay, total_delay = 0; + u64 token = 0; + long rc; + + if (*out != 0) + token = *out; + + memset(retbuf, 0, sizeof(retbuf)); + while (1) { + rc = plpar_hcall(H_DOWNLOAD_CA_FACILITY, retbuf, + unit_address, op, list_address, num, + token); + token = retbuf[0]; + if (rc != H_BUSY && !H_IS_LONG_BUSY(rc)) + break; + + if (rc != H_BUSY) { + delay = get_longbusy_msecs(rc); + total_delay += delay; + if (total_delay > CXL_HCALL_TIMEOUT_DOWNLOAD) { + WARN(1, "Warning: Giving up waiting for CXL hcall " + "%#x after %u msec\n", + H_DOWNLOAD_CA_FACILITY, total_delay); + rc = H_BUSY; + break; + } + msleep(delay); + } + } + _PRINT_MSG(rc, "cxl_h_download_facility(%#.16llx, %s(%#llx, %#llx), %#lx): %li\n", + unit_address, OP_STR_DOWNLOAD_ADAPTER(op), list_address, num, retbuf[0], rc); + trace_cxl_hcall_download_facility(unit_address, OP_STR_DOWNLOAD_ADAPTER(op), list_address, num, retbuf[0], rc); + + switch (rc) { + case H_SUCCESS: /* The operation is completed for the coherent platform facility */ + return 0; + case H_PARAMETER: /* An incorrect parameter was supplied */ + case H_FUNCTION: /* The function is not supported. */ + case H_SG_LIST: /* An block list entry was invalid */ + case H_BAD_DATA: /* Image verification failed */ + return -EINVAL; + case H_AUTHORITY: /* The partition does not have authority to perform this hcall */ + case H_RESOURCE: /* The function has page table mappings for MMIO */ + case H_HARDWARE: /* A hardware event prevented the attach operation */ + case H_STATE: /* The coherent platform facility is not in a valid state */ + case H_BUSY: + return -EBUSY; + case H_CONTINUE: + *out = retbuf[0]; + return 1; /* More data is needed for the complete image */ + default: + WARN(1, "Unexpected return code: %lx", rc); + return -EINVAL; + } +} + +/** + * cxl_h_download_adapter_image - Download the base image to the coherent + * platform facility. + */ +long cxl_h_download_adapter_image(u64 unit_address, + u64 list_address, u64 num, + u64 *out) +{ + return cxl_h_download_facility(unit_address, + H_DOWNLOAD_CA_FACILITY_DOWNLOAD, + list_address, num, out); +} + +/** + * cxl_h_validate_adapter_image - Validate the base image in the coherent + * platform facility. + */ +long cxl_h_validate_adapter_image(u64 unit_address, + u64 list_address, u64 num, + u64 *out) +{ + return cxl_h_download_facility(unit_address, + H_DOWNLOAD_CA_FACILITY_VALIDATE, + list_address, num, out); +} diff --git a/drivers/misc/cxl/hcalls.h b/drivers/misc/cxl/hcalls.h new file mode 100644 index 0000000..3e25522 --- /dev/null +++ b/drivers/misc/cxl/hcalls.h @@ -0,0 +1,204 @@ +/* + * Copyright 2015 IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#ifndef _HCALLS_H +#define _HCALLS_H + +#include <linux/types.h> +#include <asm/byteorder.h> +#include <asm/hvcall.h> +#include "cxl.h" + +#define SG_BUFFER_SIZE 4096 +#define SG_MAX_ENTRIES 256 + +struct sg_list { + u64 phys_addr; + u64 len; +}; + +/* + * This is straight out of PAPR, but replacing some of the compound fields with + * a single field, where they were identical to the register layout. + * + * The 'flags' parameter regroups the various bit-fields + */ +#define CXL_PE_CSRP_VALID (1ULL << 63) +#define CXL_PE_PROBLEM_STATE (1ULL << 62) +#define CXL_PE_SECONDARY_SEGMENT_TBL_SRCH (1ULL << 61) +#define CXL_PE_TAGS_ACTIVE (1ULL << 60) +#define CXL_PE_USER_STATE (1ULL << 59) +#define CXL_PE_TRANSLATION_ENABLED (1ULL << 58) +#define CXL_PE_64_BIT (1ULL << 57) +#define CXL_PE_PRIVILEGED_PROCESS (1ULL << 56) + +#define CXL_PROCESS_ELEMENT_VERSION 1 +struct cxl_process_element_hcall { + __be64 version; + __be64 flags; + u8 reserved0[12]; + __be32 pslVirtualIsn; + u8 applicationVirtualIsnBitmap[256]; + u8 reserved1[144]; + struct cxl_process_element_common common; + u8 reserved4[12]; +} __packed; + +#define H_STATE_NORMAL 1 +#define H_STATE_DISABLE 2 +#define H_STATE_TEMP_UNAVAILABLE 3 +#define H_STATE_PERM_UNAVAILABLE 4 + +/* NOTE: element must be a logical real address, and must be pinned */ +long cxl_h_attach_process(u64 unit_address, struct cxl_process_element_hcall *element, + u64 *process_token, u64 *mmio_addr, u64 *mmio_size); + +/** + * cxl_h_detach_process - Detach a process element from a coherent + * platform function. + */ +long cxl_h_detach_process(u64 unit_address, u64 process_token); + +/** + * cxl_h_reset_afu - Perform a reset to the coherent platform function. + */ +long cxl_h_reset_afu(u64 unit_address); + +/** + * cxl_h_suspend_process - Suspend a process from being executed + * Parameter1 = process-token as returned from H_ATTACH_CA_PROCESS when + * process was attached. + */ +long cxl_h_suspend_process(u64 unit_address, u64 process_token); + +/** + * cxl_h_resume_process - Resume a process to be executed + * Parameter1 = process-token as returned from H_ATTACH_CA_PROCESS when + * process was attached. + */ +long cxl_h_resume_process(u64 unit_address, u64 process_token); + +/** + * cxl_h_read_error_state - Reads the error state of the coherent + * platform function. + * R4 contains the error state + */ +long cxl_h_read_error_state(u64 unit_address, u64 *state); + +/** + * cxl_h_get_afu_err - collect the AFU error buffer + * Parameter1 = byte offset into error buffer to retrieve, valid values + * are between 0 and (ibm,error-buffer-size - 1) + * Parameter2 = 4K aligned real address of error buffer, to be filled in + * Parameter3 = length of error buffer, valid values are 4K or less + */ +long cxl_h_get_afu_err(u64 unit_address, u64 offset, u64 buf_address, u64 len); + +/** + * cxl_h_get_config - collect configuration record for the + * coherent platform function + * Parameter1 = # of configuration record to retrieve, valid values are + * between 0 and (ibm,#config-records - 1) + * Parameter2 = byte offset into configuration record to retrieve, + * valid values are between 0 and (ibm,config-record-size - 1) + * Parameter3 = 4K aligned real address of configuration record buffer, + * to be filled in + * Parameter4 = length of configuration buffer, valid values are 4K or less + */ +long cxl_h_get_config(u64 unit_address, u64 cr_num, u64 offset, + u64 buf_address, u64 len); + +/** + * cxl_h_terminate_process - Terminate the process before completion + * Parameter1 = process-token as returned from H_ATTACH_CA_PROCESS when + * process was attached. + */ +long cxl_h_terminate_process(u64 unit_address, u64 process_token); + +/** + * cxl_h_collect_vpd - Collect VPD for the coherent platform function. + * Parameter1 = # of VPD record to retrieve, valid values are between 0 + * and (ibm,#config-records - 1). + * Parameter2 = 4K naturally aligned real buffer containing block + * list entries + * Parameter3 = number of block list entries in the block list, valid + * values are between 0 and 256 + */ +long cxl_h_collect_vpd(u64 unit_address, u64 record, u64 list_address, + u64 num, u64 *out); + +/** + * cxl_h_get_fn_error_interrupt - Read the function-wide error data based on an interrupt + */ +long cxl_h_get_fn_error_interrupt(u64 unit_address, u64 *reg); + +/** + * cxl_h_ack_fn_error_interrupt - Acknowledge function-wide error data + * based on an interrupt + * Parameter1 = value to write to the function-wide error interrupt register + */ +long cxl_h_ack_fn_error_interrupt(u64 unit_address, u64 value); + +/** + * cxl_h_get_error_log - Retrieve the Platform Log ID (PLID) of + * an error log + */ +long cxl_h_get_error_log(u64 unit_address, u64 value); + +/** + * cxl_h_collect_int_info - Collect interrupt info about a coherent + * platform function after an interrupt occurred. + */ +long cxl_h_collect_int_info(u64 unit_address, u64 process_token, + struct cxl_irq_info *info); + +/** + * cxl_h_control_faults - Control the operation of a coherent platform + * function after a fault occurs. + * + * Parameters + * control-mask: value to control the faults + * looks like PSL_TFC_An shifted >> 32 + * reset-mask: mask to control reset of function faults + * Set reset_mask = 1 to reset PSL errors + */ +long cxl_h_control_faults(u64 unit_address, u64 process_token, + u64 control_mask, u64 reset_mask); + +/** + * cxl_h_reset_adapter - Perform a reset to the coherent platform facility. + */ +long cxl_h_reset_adapter(u64 unit_address); + +/** + * cxl_h_collect_vpd - Collect VPD for the coherent platform function. + * Parameter1 = 4K naturally aligned real buffer containing block + * list entries + * Parameter2 = number of block list entries in the block list, valid + * values are between 0 and 256 + */ +long cxl_h_collect_vpd_adapter(u64 unit_address, u64 list_address, + u64 num, u64 *out); + +/** + * cxl_h_download_adapter_image - Download the base image to the coherent + * platform facility. + */ +long cxl_h_download_adapter_image(u64 unit_address, + u64 list_address, u64 num, + u64 *out); + +/** + * cxl_h_validate_adapter_image - Validate the base image in the coherent + * platform facility. + */ +long cxl_h_validate_adapter_image(u64 unit_address, + u64 list_address, u64 num, + u64 *out); +#endif /* _HCALLS_H */ diff --git a/drivers/misc/cxl/irq.c b/drivers/misc/cxl/irq.c index 09a4060..be646dc 100644 --- a/drivers/misc/cxl/irq.c +++ b/drivers/misc/cxl/irq.c @@ -19,70 +19,11 @@ #include "cxl.h" #include "trace.h" -/* XXX: This is implementation specific */ -static irqreturn_t handle_psl_slice_error(struct cxl_context *ctx, u64 dsisr, u64 errstat) +static int afu_irq_range_start(void) { - u64 fir1, fir2, fir_slice, serr, afu_debug; - - fir1 = cxl_p1_read(ctx->afu->adapter, CXL_PSL_FIR1); - fir2 = cxl_p1_read(ctx->afu->adapter, CXL_PSL_FIR2); - fir_slice = cxl_p1n_read(ctx->afu, CXL_PSL_FIR_SLICE_An); - serr = cxl_p1n_read(ctx->afu, CXL_PSL_SERR_An); - afu_debug = cxl_p1n_read(ctx->afu, CXL_AFU_DEBUG_An); - - dev_crit(&ctx->afu->dev, "PSL ERROR STATUS: 0x%016llx\n", errstat); - dev_crit(&ctx->afu->dev, "PSL_FIR1: 0x%016llx\n", fir1); - dev_crit(&ctx->afu->dev, "PSL_FIR2: 0x%016llx\n", fir2); - dev_crit(&ctx->afu->dev, "PSL_SERR_An: 0x%016llx\n", serr); - dev_crit(&ctx->afu->dev, "PSL_FIR_SLICE_An: 0x%016llx\n", fir_slice); - dev_crit(&ctx->afu->dev, "CXL_PSL_AFU_DEBUG_An: 0x%016llx\n", afu_debug); - - dev_crit(&ctx->afu->dev, "STOPPING CXL TRACE\n"); - cxl_stop_trace(ctx->afu->adapter); - - return cxl_ack_irq(ctx, 0, errstat); -} - -irqreturn_t cxl_slice_irq_err(int irq, void *data) -{ - struct cxl_afu *afu = data; - u64 fir_slice, errstat, serr, afu_debug; - - WARN(irq, "CXL SLICE ERROR interrupt %i\n", irq); - - serr = cxl_p1n_read(afu, CXL_PSL_SERR_An); - fir_slice = cxl_p1n_read(afu, CXL_PSL_FIR_SLICE_An); - errstat = cxl_p2n_read(afu, CXL_PSL_ErrStat_An); - afu_debug = cxl_p1n_read(afu, CXL_AFU_DEBUG_An); - dev_crit(&afu->dev, "PSL_SERR_An: 0x%016llx\n", serr); - dev_crit(&afu->dev, "PSL_FIR_SLICE_An: 0x%016llx\n", fir_slice); - dev_crit(&afu->dev, "CXL_PSL_ErrStat_An: 0x%016llx\n", errstat); - dev_crit(&afu->dev, "CXL_PSL_AFU_DEBUG_An: 0x%016llx\n", afu_debug); - - cxl_p1n_write(afu, CXL_PSL_SERR_An, serr); - - return IRQ_HANDLED; -} - -static irqreturn_t cxl_irq_err(int irq, void *data) -{ - struct cxl *adapter = data; - u64 fir1, fir2, err_ivte; - - WARN(1, "CXL ERROR interrupt %i\n", irq); - - err_ivte = cxl_p1_read(adapter, CXL_PSL_ErrIVTE); - dev_crit(&adapter->dev, "PSL_ErrIVTE: 0x%016llx\n", err_ivte); - - dev_crit(&adapter->dev, "STOPPING CXL TRACE\n"); - cxl_stop_trace(adapter); - - fir1 = cxl_p1_read(adapter, CXL_PSL_FIR1); - fir2 = cxl_p1_read(adapter, CXL_PSL_FIR2); - - dev_crit(&adapter->dev, "PSL_FIR1: 0x%016llx\nPSL_FIR2: 0x%016llx\n", fir1, fir2); - - return IRQ_HANDLED; + if (cpu_has_feature(CPU_FTR_HVMODE)) + return 1; + return 0; } static irqreturn_t schedule_cxl_fault(struct cxl_context *ctx, u64 dsisr, u64 dar) @@ -93,9 +34,8 @@ static irqreturn_t schedule_cxl_fault(struct cxl_context *ctx, u64 dsisr, u64 da return IRQ_HANDLED; } -static irqreturn_t cxl_irq(int irq, void *data, struct cxl_irq_info *irq_info) +irqreturn_t cxl_irq(int irq, struct cxl_context *ctx, struct cxl_irq_info *irq_info) { - struct cxl_context *ctx = data; u64 dsisr, dar; dsisr = irq_info->dsisr; @@ -145,7 +85,8 @@ static irqreturn_t cxl_irq(int irq, void *data, struct cxl_irq_info *irq_info) if (dsisr & CXL_PSL_DSISR_An_UR) pr_devel("CXL interrupt: AURP PTE not found\n"); if (dsisr & CXL_PSL_DSISR_An_PE) - return handle_psl_slice_error(ctx, dsisr, irq_info->errstat); + return cxl_ops->handle_psl_slice_error(ctx, dsisr, + irq_info->errstat); if (dsisr & CXL_PSL_DSISR_An_AE) { pr_devel("CXL interrupt: AFU Error 0x%016llx\n", irq_info->afu_err); @@ -169,7 +110,7 @@ static irqreturn_t cxl_irq(int irq, void *data, struct cxl_irq_info *irq_info) wake_up_all(&ctx->wq); } - cxl_ack_irq(ctx, CXL_PSL_TFC_An_A, 0); + cxl_ops->ack_irq(ctx, CXL_PSL_TFC_An_A, 0); return IRQ_HANDLED; } if (dsisr & CXL_PSL_DSISR_An_OC) @@ -179,54 +120,27 @@ static irqreturn_t cxl_irq(int irq, void *data, struct cxl_irq_info *irq_info) return IRQ_HANDLED; } -static irqreturn_t fail_psl_irq(struct cxl_afu *afu, struct cxl_irq_info *irq_info) -{ - if (irq_info->dsisr & CXL_PSL_DSISR_TRANS) - cxl_p2n_write(afu, CXL_PSL_TFC_An, CXL_PSL_TFC_An_AE); - else - cxl_p2n_write(afu, CXL_PSL_TFC_An, CXL_PSL_TFC_An_A); - - return IRQ_HANDLED; -} - -static irqreturn_t cxl_irq_multiplexed(int irq, void *data) -{ - struct cxl_afu *afu = data; - struct cxl_context *ctx; - struct cxl_irq_info irq_info; - int ph = cxl_p2n_read(afu, CXL_PSL_PEHandle_An) & 0xffff; - int ret; - - if ((ret = cxl_get_irq(afu, &irq_info))) { - WARN(1, "Unable to get CXL IRQ Info: %i\n", ret); - return fail_psl_irq(afu, &irq_info); - } - - rcu_read_lock(); - ctx = idr_find(&afu->contexts_idr, ph); - if (ctx) { - ret = cxl_irq(irq, ctx, &irq_info); - rcu_read_unlock(); - return ret; - } - rcu_read_unlock(); - - WARN(1, "Unable to demultiplex CXL PSL IRQ for PE %i DSISR %016llx DAR" - " %016llx\n(Possible AFU HW issue - was a term/remove acked" - " with outstanding transactions?)\n", ph, irq_info.dsisr, - irq_info.dar); - return fail_psl_irq(afu, &irq_info); -} - static irqreturn_t cxl_irq_afu(int irq, void *data) { struct cxl_context *ctx = data; irq_hw_number_t hwirq = irqd_to_hwirq(irq_get_irq_data(irq)); - int irq_off, afu_irq = 1; + int irq_off, afu_irq = 0; __u16 range; int r; - for (r = 1; r < CXL_IRQ_RANGES; r++) { + /* + * Look for the interrupt number. + * On bare-metal, we know range 0 only contains the PSL + * interrupt so we could start counting at range 1 and initialize + * afu_irq at 1. + * In a guest, range 0 also contains AFU interrupts, so it must + * be counted for. Therefore we initialize afu_irq at 0 to take into + * account the PSL interrupt. + * + * For code-readability, it just seems easier to go over all + * the ranges on bare-metal and guest. The end result is the same. + */ + for (r = 0; r < CXL_IRQ_RANGES; r++) { irq_off = hwirq - ctx->irqs.offset[r]; range = ctx->irqs.range[r]; if (irq_off >= 0 && irq_off < range) { @@ -236,7 +150,7 @@ static irqreturn_t cxl_irq_afu(int irq, void *data) afu_irq += range; } if (unlikely(r >= CXL_IRQ_RANGES)) { - WARN(1, "Recieved AFU IRQ out of range for pe %i (virq %i hwirq %lx)\n", + WARN(1, "Received AFU IRQ out of range for pe %i (virq %i hwirq %lx)\n", ctx->pe, irq, hwirq); return IRQ_HANDLED; } @@ -246,7 +160,7 @@ static irqreturn_t cxl_irq_afu(int irq, void *data) afu_irq, ctx->pe, irq, hwirq); if (unlikely(!ctx->irq_bitmap)) { - WARN(1, "Recieved AFU IRQ for context with no IRQ bitmap\n"); + WARN(1, "Received AFU IRQ for context with no IRQ bitmap\n"); return IRQ_HANDLED; } spin_lock(&ctx->lock); @@ -272,7 +186,8 @@ unsigned int cxl_map_irq(struct cxl *adapter, irq_hw_number_t hwirq, return 0; } - cxl_setup_irq(adapter, hwirq, virq); + if (cxl_ops->setup_irq) + cxl_ops->setup_irq(adapter, hwirq, virq); pr_devel("hwirq %#lx mapped to virq %u\n", hwirq, virq); @@ -291,16 +206,16 @@ void cxl_unmap_irq(unsigned int virq, void *cookie) irq_dispose_mapping(virq); } -static int cxl_register_one_irq(struct cxl *adapter, - irq_handler_t handler, - void *cookie, - irq_hw_number_t *dest_hwirq, - unsigned int *dest_virq, - const char *name) +int cxl_register_one_irq(struct cxl *adapter, + irq_handler_t handler, + void *cookie, + irq_hw_number_t *dest_hwirq, + unsigned int *dest_virq, + const char *name) { int hwirq, virq; - if ((hwirq = cxl_alloc_one_irq(adapter)) < 0) + if ((hwirq = cxl_ops->alloc_one_irq(adapter)) < 0) return hwirq; if (!(virq = cxl_map_irq(adapter, hwirq, handler, cookie, name))) @@ -312,108 +227,10 @@ static int cxl_register_one_irq(struct cxl *adapter, return 0; err: - cxl_release_one_irq(adapter, hwirq); + cxl_ops->release_one_irq(adapter, hwirq); return -ENOMEM; } -int cxl_register_psl_err_irq(struct cxl *adapter) -{ - int rc; - - adapter->irq_name = kasprintf(GFP_KERNEL, "cxl-%s-err", - dev_name(&adapter->dev)); - if (!adapter->irq_name) - return -ENOMEM; - - if ((rc = cxl_register_one_irq(adapter, cxl_irq_err, adapter, - &adapter->err_hwirq, - &adapter->err_virq, - adapter->irq_name))) { - kfree(adapter->irq_name); - adapter->irq_name = NULL; - return rc; - } - - cxl_p1_write(adapter, CXL_PSL_ErrIVTE, adapter->err_hwirq & 0xffff); - - return 0; -} - -void cxl_release_psl_err_irq(struct cxl *adapter) -{ - if (adapter->err_virq != irq_find_mapping(NULL, adapter->err_hwirq)) - return; - - cxl_p1_write(adapter, CXL_PSL_ErrIVTE, 0x0000000000000000); - cxl_unmap_irq(adapter->err_virq, adapter); - cxl_release_one_irq(adapter, adapter->err_hwirq); - kfree(adapter->irq_name); -} - -int cxl_register_serr_irq(struct cxl_afu *afu) -{ - u64 serr; - int rc; - - afu->err_irq_name = kasprintf(GFP_KERNEL, "cxl-%s-err", - dev_name(&afu->dev)); - if (!afu->err_irq_name) - return -ENOMEM; - - if ((rc = cxl_register_one_irq(afu->adapter, cxl_slice_irq_err, afu, - &afu->serr_hwirq, - &afu->serr_virq, afu->err_irq_name))) { - kfree(afu->err_irq_name); - afu->err_irq_name = NULL; - return rc; - } - - serr = cxl_p1n_read(afu, CXL_PSL_SERR_An); - serr = (serr & 0x00ffffffffff0000ULL) | (afu->serr_hwirq & 0xffff); - cxl_p1n_write(afu, CXL_PSL_SERR_An, serr); - - return 0; -} - -void cxl_release_serr_irq(struct cxl_afu *afu) -{ - if (afu->serr_virq != irq_find_mapping(NULL, afu->serr_hwirq)) - return; - - cxl_p1n_write(afu, CXL_PSL_SERR_An, 0x0000000000000000); - cxl_unmap_irq(afu->serr_virq, afu); - cxl_release_one_irq(afu->adapter, afu->serr_hwirq); - kfree(afu->err_irq_name); -} - -int cxl_register_psl_irq(struct cxl_afu *afu) -{ - int rc; - - afu->psl_irq_name = kasprintf(GFP_KERNEL, "cxl-%s", - dev_name(&afu->dev)); - if (!afu->psl_irq_name) - return -ENOMEM; - - if ((rc = cxl_register_one_irq(afu->adapter, cxl_irq_multiplexed, afu, - &afu->psl_hwirq, &afu->psl_virq, - afu->psl_irq_name))) { - kfree(afu->psl_irq_name); - afu->psl_irq_name = NULL; - } - return rc; -} - -void cxl_release_psl_irq(struct cxl_afu *afu) -{ - if (afu->psl_virq != irq_find_mapping(NULL, afu->psl_hwirq)) - return; - - cxl_unmap_irq(afu->psl_virq, afu); - cxl_release_one_irq(afu->adapter, afu->psl_hwirq); - kfree(afu->psl_irq_name); -} - void afu_irq_name_free(struct cxl_context *ctx) { struct cxl_irq_name *irq_name, *tmp; @@ -429,16 +246,33 @@ int afu_allocate_irqs(struct cxl_context *ctx, u32 count) { int rc, r, i, j = 1; struct cxl_irq_name *irq_name; + int alloc_count; + + /* + * In native mode, range 0 is reserved for the multiplexed + * PSL interrupt. It has been allocated when the AFU was initialized. + * + * In a guest, the PSL interrupt is not mutliplexed, but per-context, + * and is the first interrupt from range 0. It still needs to be + * allocated, so bump the count by one. + */ + if (cpu_has_feature(CPU_FTR_HVMODE)) + alloc_count = count; + else + alloc_count = count + 1; /* Initialize the list head to hold irq names */ INIT_LIST_HEAD(&ctx->irq_names); - if ((rc = cxl_alloc_irq_ranges(&ctx->irqs, ctx->afu->adapter, count))) + if ((rc = cxl_ops->alloc_irq_ranges(&ctx->irqs, ctx->afu->adapter, + alloc_count))) return rc; - /* Multiplexed PSL Interrupt */ - ctx->irqs.offset[0] = ctx->afu->psl_hwirq; - ctx->irqs.range[0] = 1; + if (cpu_has_feature(CPU_FTR_HVMODE)) { + /* Multiplexed PSL Interrupt */ + ctx->irqs.offset[0] = ctx->afu->native->psl_hwirq; + ctx->irqs.range[0] = 1; + } ctx->irq_count = count; ctx->irq_bitmap = kcalloc(BITS_TO_LONGS(count), @@ -450,7 +284,7 @@ int afu_allocate_irqs(struct cxl_context *ctx, u32 count) * Allocate names first. If any fail, bail out before allocating * actual hardware IRQs. */ - for (r = 1; r < CXL_IRQ_RANGES; r++) { + for (r = afu_irq_range_start(); r < CXL_IRQ_RANGES; r++) { for (i = 0; i < ctx->irqs.range[r]; i++) { irq_name = kmalloc(sizeof(struct cxl_irq_name), GFP_KERNEL); @@ -471,7 +305,7 @@ int afu_allocate_irqs(struct cxl_context *ctx, u32 count) return 0; out: - cxl_release_irq_ranges(&ctx->irqs, ctx->afu->adapter); + cxl_ops->release_irq_ranges(&ctx->irqs, ctx->afu->adapter); afu_irq_name_free(ctx); return -ENOMEM; } @@ -480,15 +314,30 @@ static void afu_register_hwirqs(struct cxl_context *ctx) { irq_hw_number_t hwirq; struct cxl_irq_name *irq_name; - int r,i; + int r, i; + irqreturn_t (*handler)(int irq, void *data); /* We've allocated all memory now, so let's do the irq allocations */ irq_name = list_first_entry(&ctx->irq_names, struct cxl_irq_name, list); - for (r = 1; r < CXL_IRQ_RANGES; r++) { + for (r = afu_irq_range_start(); r < CXL_IRQ_RANGES; r++) { hwirq = ctx->irqs.offset[r]; for (i = 0; i < ctx->irqs.range[r]; hwirq++, i++) { - cxl_map_irq(ctx->afu->adapter, hwirq, - cxl_irq_afu, ctx, irq_name->name); + if (r == 0 && i == 0) + /* + * The very first interrupt of range 0 is + * always the PSL interrupt, but we only + * need to connect a handler for guests, + * because there's one PSL interrupt per + * context. + * On bare-metal, the PSL interrupt is + * multiplexed and was setup when the AFU + * was configured. + */ + handler = cxl_ops->psl_interrupt; + else + handler = cxl_irq_afu; + cxl_map_irq(ctx->afu->adapter, hwirq, handler, ctx, + irq_name->name); irq_name = list_next_entry(irq_name, list); } } @@ -504,7 +353,7 @@ int afu_register_irqs(struct cxl_context *ctx, u32 count) afu_register_hwirqs(ctx); return 0; - } +} void afu_release_irqs(struct cxl_context *ctx, void *cookie) { @@ -512,7 +361,7 @@ void afu_release_irqs(struct cxl_context *ctx, void *cookie) unsigned int virq; int r, i; - for (r = 1; r < CXL_IRQ_RANGES; r++) { + for (r = afu_irq_range_start(); r < CXL_IRQ_RANGES; r++) { hwirq = ctx->irqs.offset[r]; for (i = 0; i < ctx->irqs.range[r]; hwirq++, i++) { virq = irq_find_mapping(NULL, hwirq); @@ -522,7 +371,7 @@ void afu_release_irqs(struct cxl_context *ctx, void *cookie) } afu_irq_name_free(ctx); - cxl_release_irq_ranges(&ctx->irqs, ctx->afu->adapter); + cxl_ops->release_irq_ranges(&ctx->irqs, ctx->afu->adapter); ctx->irq_count = 0; } diff --git a/drivers/misc/cxl/main.c b/drivers/misc/cxl/main.c index 9fde75e..ae68c32 100644 --- a/drivers/misc/cxl/main.c +++ b/drivers/misc/cxl/main.c @@ -32,6 +32,29 @@ uint cxl_verbose; module_param_named(verbose, cxl_verbose, uint, 0600); MODULE_PARM_DESC(verbose, "Enable verbose dmesg output"); +const struct cxl_backend_ops *cxl_ops; + +int cxl_afu_slbia(struct cxl_afu *afu) +{ + unsigned long timeout = jiffies + (HZ * CXL_TIMEOUT); + + pr_devel("cxl_afu_slbia issuing SLBIA command\n"); + cxl_p2n_write(afu, CXL_SLBIA_An, CXL_TLB_SLB_IQ_ALL); + while (cxl_p2n_read(afu, CXL_SLBIA_An) & CXL_TLB_SLB_P) { + if (time_after_eq(jiffies, timeout)) { + dev_warn(&afu->dev, "WARNING: CXL AFU SLBIA timed out!\n"); + return -EBUSY; + } + /* If the adapter has gone down, we can assume that we + * will PERST it and that will invalidate everything. + */ + if (!cxl_ops->link_ok(afu->adapter, afu)) + return -EIO; + cpu_relax(); + } + return 0; +} + static inline void _cxl_slbia(struct cxl_context *ctx, struct mm_struct *mm) { struct task_struct *task; @@ -139,6 +162,32 @@ int cxl_alloc_sst(struct cxl_context *ctx) return 0; } +/* print buffer content as integers when debugging */ +void cxl_dump_debug_buffer(void *buf, size_t buf_len) +{ +#ifdef DEBUG + int i, *ptr; + + /* + * We want to regroup up to 4 integers per line, which means they + * need to be in the same pr_devel() statement + */ + ptr = (int *) buf; + for (i = 0; i * 4 < buf_len; i += 4) { + if ((i + 3) * 4 < buf_len) + pr_devel("%.8x %.8x %.8x %.8x\n", ptr[i], ptr[i + 1], + ptr[i + 2], ptr[i + 3]); + else if ((i + 2) * 4 < buf_len) + pr_devel("%.8x %.8x %.8x\n", ptr[i], ptr[i + 1], + ptr[i + 2]); + else if ((i + 1) * 4 < buf_len) + pr_devel("%.8x %.8x\n", ptr[i], ptr[i + 1]); + else + pr_devel("%.8x\n", ptr[i]); + } +#endif /* DEBUG */ +} + /* Find a CXL adapter by it's number and increase it's refcount */ struct cxl *get_cxl_adapter(int num) { @@ -152,7 +201,7 @@ struct cxl *get_cxl_adapter(int num) return adapter; } -int cxl_alloc_adapter_nr(struct cxl *adapter) +static int cxl_alloc_adapter_nr(struct cxl *adapter) { int i; @@ -174,13 +223,58 @@ void cxl_remove_adapter_nr(struct cxl *adapter) idr_remove(&cxl_adapter_idr, adapter->adapter_num); } +struct cxl *cxl_alloc_adapter(void) +{ + struct cxl *adapter; + + if (!(adapter = kzalloc(sizeof(struct cxl), GFP_KERNEL))) + return NULL; + + spin_lock_init(&adapter->afu_list_lock); + + if (cxl_alloc_adapter_nr(adapter)) + goto err1; + + if (dev_set_name(&adapter->dev, "card%i", adapter->adapter_num)) + goto err2; + + return adapter; + +err2: + cxl_remove_adapter_nr(adapter); +err1: + kfree(adapter); + return NULL; +} + +struct cxl_afu *cxl_alloc_afu(struct cxl *adapter, int slice) +{ + struct cxl_afu *afu; + + if (!(afu = kzalloc(sizeof(struct cxl_afu), GFP_KERNEL))) + return NULL; + + afu->adapter = adapter; + afu->dev.parent = &adapter->dev; + afu->dev.release = cxl_ops->release_afu; + afu->slice = slice; + idr_init(&afu->contexts_idr); + mutex_init(&afu->contexts_lock); + spin_lock_init(&afu->afu_cntl_lock); + + afu->prefault_mode = CXL_PREFAULT_NONE; + afu->irqs_max = afu->adapter->user_irqs; + + return afu; +} + int cxl_afu_select_best_mode(struct cxl_afu *afu) { if (afu->modes_supported & CXL_MODE_DIRECTED) - return cxl_afu_activate_mode(afu, CXL_MODE_DIRECTED); + return cxl_ops->afu_activate_mode(afu, CXL_MODE_DIRECTED); if (afu->modes_supported & CXL_MODE_DEDICATED) - return cxl_afu_activate_mode(afu, CXL_MODE_DEDICATED); + return cxl_ops->afu_activate_mode(afu, CXL_MODE_DEDICATED); dev_warn(&afu->dev, "No supported programming modes available\n"); /* We don't fail this so the user can inspect sysfs */ @@ -191,9 +285,6 @@ static int __init init_cxl(void) { int rc = 0; - if (!cpu_has_feature(CPU_FTR_HVMODE)) - return -EPERM; - if ((rc = cxl_file_init())) return rc; @@ -202,7 +293,17 @@ static int __init init_cxl(void) if ((rc = register_cxl_calls(&cxl_calls))) goto err; - if ((rc = pci_register_driver(&cxl_pci_driver))) + if (cpu_has_feature(CPU_FTR_HVMODE)) { + cxl_ops = &cxl_native_ops; + rc = pci_register_driver(&cxl_pci_driver); + } +#ifdef CONFIG_PPC_PSERIES + else { + cxl_ops = &cxl_guest_ops; + rc = platform_driver_register(&cxl_of_driver); + } +#endif + if (rc) goto err1; return 0; @@ -217,7 +318,12 @@ err: static void exit_cxl(void) { - pci_unregister_driver(&cxl_pci_driver); + if (cpu_has_feature(CPU_FTR_HVMODE)) + pci_unregister_driver(&cxl_pci_driver); +#ifdef CONFIG_PPC_PSERIES + else + platform_driver_unregister(&cxl_of_driver); +#endif cxl_debugfs_exit(); cxl_file_exit(); diff --git a/drivers/misc/cxl/native.c b/drivers/misc/cxl/native.c index f409097..387fcbd 100644 --- a/drivers/misc/cxl/native.c +++ b/drivers/misc/cxl/native.c @@ -42,7 +42,7 @@ static int afu_control(struct cxl_afu *afu, u64 command, goto out; } - if (!cxl_adapter_link_ok(afu->adapter)) { + if (!cxl_ops->link_ok(afu->adapter, afu)) { afu->enabled = enabled; rc = -EIO; goto out; @@ -80,7 +80,7 @@ int cxl_afu_disable(struct cxl_afu *afu) } /* This will disable as well as reset */ -int __cxl_afu_reset(struct cxl_afu *afu) +static int native_afu_reset(struct cxl_afu *afu) { pr_devel("AFU reset request\n"); @@ -90,9 +90,9 @@ int __cxl_afu_reset(struct cxl_afu *afu) false); } -int cxl_afu_check_and_enable(struct cxl_afu *afu) +static int native_afu_check_and_enable(struct cxl_afu *afu) { - if (!cxl_adapter_link_ok(afu->adapter)) { + if (!cxl_ops->link_ok(afu->adapter, afu)) { WARN(1, "Refusing to enable afu while link down!\n"); return -EIO; } @@ -114,7 +114,7 @@ int cxl_psl_purge(struct cxl_afu *afu) pr_devel("PSL purge request\n"); - if (!cxl_adapter_link_ok(afu->adapter)) { + if (!cxl_ops->link_ok(afu->adapter, afu)) { dev_warn(&afu->dev, "PSL Purge called with link down, ignoring\n"); rc = -EIO; goto out; @@ -136,7 +136,7 @@ int cxl_psl_purge(struct cxl_afu *afu) rc = -EBUSY; goto out; } - if (!cxl_adapter_link_ok(afu->adapter)) { + if (!cxl_ops->link_ok(afu->adapter, afu)) { rc = -EIO; goto out; } @@ -186,22 +186,22 @@ static int spa_max_procs(int spa_size) int cxl_alloc_spa(struct cxl_afu *afu) { /* Work out how many pages to allocate */ - afu->spa_order = 0; + afu->native->spa_order = 0; do { - afu->spa_order++; - afu->spa_size = (1 << afu->spa_order) * PAGE_SIZE; - afu->spa_max_procs = spa_max_procs(afu->spa_size); - } while (afu->spa_max_procs < afu->num_procs); + afu->native->spa_order++; + afu->native->spa_size = (1 << afu->native->spa_order) * PAGE_SIZE; + afu->native->spa_max_procs = spa_max_procs(afu->native->spa_size); + } while (afu->native->spa_max_procs < afu->num_procs); - WARN_ON(afu->spa_size > 0x100000); /* Max size supported by the hardware */ + WARN_ON(afu->native->spa_size > 0x100000); /* Max size supported by the hardware */ - if (!(afu->spa = (struct cxl_process_element *) - __get_free_pages(GFP_KERNEL | __GFP_ZERO, afu->spa_order))) { + if (!(afu->native->spa = (struct cxl_process_element *) + __get_free_pages(GFP_KERNEL | __GFP_ZERO, afu->native->spa_order))) { pr_err("cxl_alloc_spa: Unable to allocate scheduled process area\n"); return -ENOMEM; } pr_devel("spa pages: %i afu->spa_max_procs: %i afu->num_procs: %i\n", - 1<<afu->spa_order, afu->spa_max_procs, afu->num_procs); + 1<<afu->native->spa_order, afu->native->spa_max_procs, afu->num_procs); return 0; } @@ -210,13 +210,15 @@ static void attach_spa(struct cxl_afu *afu) { u64 spap; - afu->sw_command_status = (__be64 *)((char *)afu->spa + - ((afu->spa_max_procs + 3) * 128)); + afu->native->sw_command_status = (__be64 *)((char *)afu->native->spa + + ((afu->native->spa_max_procs + 3) * 128)); - spap = virt_to_phys(afu->spa) & CXL_PSL_SPAP_Addr; - spap |= ((afu->spa_size >> (12 - CXL_PSL_SPAP_Size_Shift)) - 1) & CXL_PSL_SPAP_Size; + spap = virt_to_phys(afu->native->spa) & CXL_PSL_SPAP_Addr; + spap |= ((afu->native->spa_size >> (12 - CXL_PSL_SPAP_Size_Shift)) - 1) & CXL_PSL_SPAP_Size; spap |= CXL_PSL_SPAP_V; - pr_devel("cxl: SPA allocated at 0x%p. Max processes: %i, sw_command_status: 0x%p CXL_PSL_SPAP_An=0x%016llx\n", afu->spa, afu->spa_max_procs, afu->sw_command_status, spap); + pr_devel("cxl: SPA allocated at 0x%p. Max processes: %i, sw_command_status: 0x%p CXL_PSL_SPAP_An=0x%016llx\n", + afu->native->spa, afu->native->spa_max_procs, + afu->native->sw_command_status, spap); cxl_p1n_write(afu, CXL_PSL_SPAP_An, spap); } @@ -227,9 +229,10 @@ static inline void detach_spa(struct cxl_afu *afu) void cxl_release_spa(struct cxl_afu *afu) { - if (afu->spa) { - free_pages((unsigned long) afu->spa, afu->spa_order); - afu->spa = NULL; + if (afu->native->spa) { + free_pages((unsigned long) afu->native->spa, + afu->native->spa_order); + afu->native->spa = NULL; } } @@ -247,7 +250,7 @@ int cxl_tlb_slb_invalidate(struct cxl *adapter) dev_warn(&adapter->dev, "WARNING: CXL adapter wide TLBIA timed out!\n"); return -EBUSY; } - if (!cxl_adapter_link_ok(adapter)) + if (!cxl_ops->link_ok(adapter, NULL)) return -EIO; cpu_relax(); } @@ -258,28 +261,7 @@ int cxl_tlb_slb_invalidate(struct cxl *adapter) dev_warn(&adapter->dev, "WARNING: CXL adapter wide SLBIA timed out!\n"); return -EBUSY; } - if (!cxl_adapter_link_ok(adapter)) - return -EIO; - cpu_relax(); - } - return 0; -} - -int cxl_afu_slbia(struct cxl_afu *afu) -{ - unsigned long timeout = jiffies + (HZ * CXL_TIMEOUT); - - pr_devel("cxl_afu_slbia issuing SLBIA command\n"); - cxl_p2n_write(afu, CXL_SLBIA_An, CXL_TLB_SLB_IQ_ALL); - while (cxl_p2n_read(afu, CXL_SLBIA_An) & CXL_TLB_SLB_P) { - if (time_after_eq(jiffies, timeout)) { - dev_warn(&afu->dev, "WARNING: CXL AFU SLBIA timed out!\n"); - return -EBUSY; - } - /* If the adapter has gone down, we can assume that we - * will PERST it and that will invalidate everything. - */ - if (!cxl_adapter_link_ok(afu->adapter)) + if (!cxl_ops->link_ok(adapter, NULL)) return -EIO; cpu_relax(); } @@ -312,7 +294,7 @@ static void slb_invalid(struct cxl_context *ctx) struct cxl *adapter = ctx->afu->adapter; u64 slbia; - WARN_ON(!mutex_is_locked(&ctx->afu->spa_mutex)); + WARN_ON(!mutex_is_locked(&ctx->afu->native->spa_mutex)); cxl_p1_write(adapter, CXL_PSL_LBISEL, ((u64)be32_to_cpu(ctx->elem->common.pid) << 32) | @@ -320,7 +302,7 @@ static void slb_invalid(struct cxl_context *ctx) cxl_p1_write(adapter, CXL_PSL_SLBIA, CXL_TLB_SLB_IQ_LPIDPID); while (1) { - if (!cxl_adapter_link_ok(adapter)) + if (!cxl_ops->link_ok(adapter, NULL)) break; slbia = cxl_p1_read(adapter, CXL_PSL_SLBIA); if (!(slbia & CXL_TLB_SLB_P)) @@ -342,7 +324,7 @@ static int do_process_element_cmd(struct cxl_context *ctx, ctx->elem->software_state = cpu_to_be32(pe_state); smp_wmb(); - *(ctx->afu->sw_command_status) = cpu_to_be64(cmd | 0 | ctx->pe); + *(ctx->afu->native->sw_command_status) = cpu_to_be64(cmd | 0 | ctx->pe); smp_mb(); cxl_p1n_write(ctx->afu, CXL_PSL_LLCMD_An, cmd | ctx->pe); while (1) { @@ -351,12 +333,12 @@ static int do_process_element_cmd(struct cxl_context *ctx, rc = -EBUSY; goto out; } - if (!cxl_adapter_link_ok(ctx->afu->adapter)) { + if (!cxl_ops->link_ok(ctx->afu->adapter, ctx->afu)) { dev_warn(&ctx->afu->dev, "WARNING: Device link down, aborting Process Element Command!\n"); rc = -EIO; goto out; } - state = be64_to_cpup(ctx->afu->sw_command_status); + state = be64_to_cpup(ctx->afu->native->sw_command_status); if (state == ~0ULL) { pr_err("cxl: Error adding process element to AFU\n"); rc = -1; @@ -384,12 +366,12 @@ static int add_process_element(struct cxl_context *ctx) { int rc = 0; - mutex_lock(&ctx->afu->spa_mutex); + mutex_lock(&ctx->afu->native->spa_mutex); pr_devel("%s Adding pe: %i started\n", __func__, ctx->pe); if (!(rc = do_process_element_cmd(ctx, CXL_SPA_SW_CMD_ADD, CXL_PE_SOFTWARE_STATE_V))) ctx->pe_inserted = true; pr_devel("%s Adding pe: %i finished\n", __func__, ctx->pe); - mutex_unlock(&ctx->afu->spa_mutex); + mutex_unlock(&ctx->afu->native->spa_mutex); return rc; } @@ -401,18 +383,18 @@ static int terminate_process_element(struct cxl_context *ctx) if (!(ctx->elem->software_state & cpu_to_be32(CXL_PE_SOFTWARE_STATE_V))) return rc; - mutex_lock(&ctx->afu->spa_mutex); + mutex_lock(&ctx->afu->native->spa_mutex); pr_devel("%s Terminate pe: %i started\n", __func__, ctx->pe); /* We could be asked to terminate when the hw is down. That * should always succeed: it's not running if the hw has gone * away and is being reset. */ - if (cxl_adapter_link_ok(ctx->afu->adapter)) + if (cxl_ops->link_ok(ctx->afu->adapter, ctx->afu)) rc = do_process_element_cmd(ctx, CXL_SPA_SW_CMD_TERMINATE, CXL_PE_SOFTWARE_STATE_V | CXL_PE_SOFTWARE_STATE_T); ctx->elem->software_state = 0; /* Remove Valid bit */ pr_devel("%s Terminate pe: %i finished\n", __func__, ctx->pe); - mutex_unlock(&ctx->afu->spa_mutex); + mutex_unlock(&ctx->afu->native->spa_mutex); return rc; } @@ -420,20 +402,20 @@ static int remove_process_element(struct cxl_context *ctx) { int rc = 0; - mutex_lock(&ctx->afu->spa_mutex); + mutex_lock(&ctx->afu->native->spa_mutex); pr_devel("%s Remove pe: %i started\n", __func__, ctx->pe); /* We could be asked to remove when the hw is down. Again, if * the hw is down, the PE is gone, so we succeed. */ - if (cxl_adapter_link_ok(ctx->afu->adapter)) + if (cxl_ops->link_ok(ctx->afu->adapter, ctx->afu)) rc = do_process_element_cmd(ctx, CXL_SPA_SW_CMD_REMOVE, 0); if (!rc) ctx->pe_inserted = false; slb_invalid(ctx); pr_devel("%s Remove pe: %i finished\n", __func__, ctx->pe); - mutex_unlock(&ctx->afu->spa_mutex); + mutex_unlock(&ctx->afu->native->spa_mutex); return rc; } @@ -446,7 +428,7 @@ void cxl_assign_psn_space(struct cxl_context *ctx) ctx->psn_size = ctx->afu->adapter->ps_size; } else { ctx->psn_phys = ctx->afu->psn_phys + - (ctx->afu->pp_offset + ctx->afu->pp_size * ctx->pe); + (ctx->afu->native->pp_offset + ctx->afu->pp_size * ctx->pe); ctx->psn_size = ctx->afu->pp_size; } } @@ -458,7 +440,7 @@ static int activate_afu_directed(struct cxl_afu *afu) dev_info(&afu->dev, "Activating AFU directed mode\n"); afu->num_procs = afu->max_procs_virtualised; - if (afu->spa == NULL) { + if (afu->native->spa == NULL) { if (cxl_alloc_spa(afu)) return -ENOMEM; } @@ -552,7 +534,7 @@ static int attach_afu_directed(struct cxl_context *ctx, u64 wed, u64 amr) ctx->elem->common.wed = cpu_to_be64(wed); /* first guy needs to enable */ - if ((result = cxl_afu_check_and_enable(ctx->afu))) + if ((result = cxl_ops->afu_check_and_enable(ctx->afu))) return result; return add_process_element(ctx); @@ -568,7 +550,7 @@ static int deactivate_afu_directed(struct cxl_afu *afu) cxl_sysfs_afu_m_remove(afu); cxl_chardev_afu_remove(afu); - __cxl_afu_reset(afu); + cxl_ops->afu_reset(afu); cxl_afu_disable(afu); cxl_psl_purge(afu); @@ -632,7 +614,7 @@ static int attach_dedicated(struct cxl_context *ctx, u64 wed, u64 amr) /* master only context for dedicated */ cxl_assign_psn_space(ctx); - if ((rc = __cxl_afu_reset(afu))) + if ((rc = cxl_ops->afu_reset(afu))) return rc; cxl_p2n_write(afu, CXL_PSL_WED_An, wed); @@ -652,7 +634,7 @@ static int deactivate_dedicated_process(struct cxl_afu *afu) return 0; } -int _cxl_afu_deactivate_mode(struct cxl_afu *afu, int mode) +static int native_afu_deactivate_mode(struct cxl_afu *afu, int mode) { if (mode == CXL_MODE_DIRECTED) return deactivate_afu_directed(afu); @@ -661,19 +643,14 @@ int _cxl_afu_deactivate_mode(struct cxl_afu *afu, int mode) return 0; } -int cxl_afu_deactivate_mode(struct cxl_afu *afu) -{ - return _cxl_afu_deactivate_mode(afu, afu->current_mode); -} - -int cxl_afu_activate_mode(struct cxl_afu *afu, int mode) +static int native_afu_activate_mode(struct cxl_afu *afu, int mode) { if (!mode) return 0; if (!(mode & afu->modes_supported)) return -EINVAL; - if (!cxl_adapter_link_ok(afu->adapter)) { + if (!cxl_ops->link_ok(afu->adapter, afu)) { WARN(1, "Device link is down, refusing to activate!\n"); return -EIO; } @@ -686,9 +663,10 @@ int cxl_afu_activate_mode(struct cxl_afu *afu, int mode) return -EINVAL; } -int cxl_attach_process(struct cxl_context *ctx, bool kernel, u64 wed, u64 amr) +static int native_attach_process(struct cxl_context *ctx, bool kernel, + u64 wed, u64 amr) { - if (!cxl_adapter_link_ok(ctx->afu->adapter)) { + if (!cxl_ops->link_ok(ctx->afu->adapter, ctx->afu)) { WARN(1, "Device link is down, refusing to attach process!\n"); return -EIO; } @@ -705,7 +683,7 @@ int cxl_attach_process(struct cxl_context *ctx, bool kernel, u64 wed, u64 amr) static inline int detach_process_native_dedicated(struct cxl_context *ctx) { - __cxl_afu_reset(ctx->afu); + cxl_ops->afu_reset(ctx->afu); cxl_afu_disable(ctx->afu); cxl_psl_purge(ctx->afu); return 0; @@ -723,7 +701,7 @@ static inline int detach_process_native_afu_directed(struct cxl_context *ctx) return 0; } -int cxl_detach_process(struct cxl_context *ctx) +static int native_detach_process(struct cxl_context *ctx) { trace_cxl_detach(ctx); @@ -733,14 +711,14 @@ int cxl_detach_process(struct cxl_context *ctx) return detach_process_native_afu_directed(ctx); } -int cxl_get_irq(struct cxl_afu *afu, struct cxl_irq_info *info) +static int native_get_irq_info(struct cxl_afu *afu, struct cxl_irq_info *info) { u64 pidtid; /* If the adapter has gone away, we can't get any meaningful * information. */ - if (!cxl_adapter_link_ok(afu->adapter)) + if (!cxl_ops->link_ok(afu->adapter, afu)) return -EIO; info->dsisr = cxl_p2n_read(afu, CXL_PSL_DSISR_An); @@ -751,10 +729,214 @@ int cxl_get_irq(struct cxl_afu *afu, struct cxl_irq_info *info) info->tid = pidtid & 0xffffffff; info->afu_err = cxl_p2n_read(afu, CXL_AFU_ERR_An); info->errstat = cxl_p2n_read(afu, CXL_PSL_ErrStat_An); + info->proc_handle = 0; + + return 0; +} + +static irqreturn_t native_handle_psl_slice_error(struct cxl_context *ctx, + u64 dsisr, u64 errstat) +{ + u64 fir1, fir2, fir_slice, serr, afu_debug; + + fir1 = cxl_p1_read(ctx->afu->adapter, CXL_PSL_FIR1); + fir2 = cxl_p1_read(ctx->afu->adapter, CXL_PSL_FIR2); + fir_slice = cxl_p1n_read(ctx->afu, CXL_PSL_FIR_SLICE_An); + serr = cxl_p1n_read(ctx->afu, CXL_PSL_SERR_An); + afu_debug = cxl_p1n_read(ctx->afu, CXL_AFU_DEBUG_An); + + dev_crit(&ctx->afu->dev, "PSL ERROR STATUS: 0x%016llx\n", errstat); + dev_crit(&ctx->afu->dev, "PSL_FIR1: 0x%016llx\n", fir1); + dev_crit(&ctx->afu->dev, "PSL_FIR2: 0x%016llx\n", fir2); + dev_crit(&ctx->afu->dev, "PSL_SERR_An: 0x%016llx\n", serr); + dev_crit(&ctx->afu->dev, "PSL_FIR_SLICE_An: 0x%016llx\n", fir_slice); + dev_crit(&ctx->afu->dev, "CXL_PSL_AFU_DEBUG_An: 0x%016llx\n", afu_debug); + + dev_crit(&ctx->afu->dev, "STOPPING CXL TRACE\n"); + cxl_stop_trace(ctx->afu->adapter); + + return cxl_ops->ack_irq(ctx, 0, errstat); +} + +static irqreturn_t fail_psl_irq(struct cxl_afu *afu, struct cxl_irq_info *irq_info) +{ + if (irq_info->dsisr & CXL_PSL_DSISR_TRANS) + cxl_p2n_write(afu, CXL_PSL_TFC_An, CXL_PSL_TFC_An_AE); + else + cxl_p2n_write(afu, CXL_PSL_TFC_An, CXL_PSL_TFC_An_A); + + return IRQ_HANDLED; +} + +static irqreturn_t native_irq_multiplexed(int irq, void *data) +{ + struct cxl_afu *afu = data; + struct cxl_context *ctx; + struct cxl_irq_info irq_info; + int ph = cxl_p2n_read(afu, CXL_PSL_PEHandle_An) & 0xffff; + int ret; + + if ((ret = native_get_irq_info(afu, &irq_info))) { + WARN(1, "Unable to get CXL IRQ Info: %i\n", ret); + return fail_psl_irq(afu, &irq_info); + } + + rcu_read_lock(); + ctx = idr_find(&afu->contexts_idr, ph); + if (ctx) { + ret = cxl_irq(irq, ctx, &irq_info); + rcu_read_unlock(); + return ret; + } + rcu_read_unlock(); + + WARN(1, "Unable to demultiplex CXL PSL IRQ for PE %i DSISR %016llx DAR" + " %016llx\n(Possible AFU HW issue - was a term/remove acked" + " with outstanding transactions?)\n", ph, irq_info.dsisr, + irq_info.dar); + return fail_psl_irq(afu, &irq_info); +} + +static irqreturn_t native_slice_irq_err(int irq, void *data) +{ + struct cxl_afu *afu = data; + u64 fir_slice, errstat, serr, afu_debug; + + WARN(irq, "CXL SLICE ERROR interrupt %i\n", irq); + + serr = cxl_p1n_read(afu, CXL_PSL_SERR_An); + fir_slice = cxl_p1n_read(afu, CXL_PSL_FIR_SLICE_An); + errstat = cxl_p2n_read(afu, CXL_PSL_ErrStat_An); + afu_debug = cxl_p1n_read(afu, CXL_AFU_DEBUG_An); + dev_crit(&afu->dev, "PSL_SERR_An: 0x%016llx\n", serr); + dev_crit(&afu->dev, "PSL_FIR_SLICE_An: 0x%016llx\n", fir_slice); + dev_crit(&afu->dev, "CXL_PSL_ErrStat_An: 0x%016llx\n", errstat); + dev_crit(&afu->dev, "CXL_PSL_AFU_DEBUG_An: 0x%016llx\n", afu_debug); + + cxl_p1n_write(afu, CXL_PSL_SERR_An, serr); + + return IRQ_HANDLED; +} + +static irqreturn_t native_irq_err(int irq, void *data) +{ + struct cxl *adapter = data; + u64 fir1, fir2, err_ivte; + + WARN(1, "CXL ERROR interrupt %i\n", irq); + + err_ivte = cxl_p1_read(adapter, CXL_PSL_ErrIVTE); + dev_crit(&adapter->dev, "PSL_ErrIVTE: 0x%016llx\n", err_ivte); + + dev_crit(&adapter->dev, "STOPPING CXL TRACE\n"); + cxl_stop_trace(adapter); + + fir1 = cxl_p1_read(adapter, CXL_PSL_FIR1); + fir2 = cxl_p1_read(adapter, CXL_PSL_FIR2); + + dev_crit(&adapter->dev, "PSL_FIR1: 0x%016llx\nPSL_FIR2: 0x%016llx\n", fir1, fir2); + + return IRQ_HANDLED; +} + +int cxl_native_register_psl_err_irq(struct cxl *adapter) +{ + int rc; + + adapter->irq_name = kasprintf(GFP_KERNEL, "cxl-%s-err", + dev_name(&adapter->dev)); + if (!adapter->irq_name) + return -ENOMEM; + + if ((rc = cxl_register_one_irq(adapter, native_irq_err, adapter, + &adapter->native->err_hwirq, + &adapter->native->err_virq, + adapter->irq_name))) { + kfree(adapter->irq_name); + adapter->irq_name = NULL; + return rc; + } + + cxl_p1_write(adapter, CXL_PSL_ErrIVTE, adapter->native->err_hwirq & 0xffff); + + return 0; +} + +void cxl_native_release_psl_err_irq(struct cxl *adapter) +{ + if (adapter->native->err_virq != irq_find_mapping(NULL, adapter->native->err_hwirq)) + return; + + cxl_p1_write(adapter, CXL_PSL_ErrIVTE, 0x0000000000000000); + cxl_unmap_irq(adapter->native->err_virq, adapter); + cxl_ops->release_one_irq(adapter, adapter->native->err_hwirq); + kfree(adapter->irq_name); +} + +int cxl_native_register_serr_irq(struct cxl_afu *afu) +{ + u64 serr; + int rc; + + afu->err_irq_name = kasprintf(GFP_KERNEL, "cxl-%s-err", + dev_name(&afu->dev)); + if (!afu->err_irq_name) + return -ENOMEM; + + if ((rc = cxl_register_one_irq(afu->adapter, native_slice_irq_err, afu, + &afu->serr_hwirq, + &afu->serr_virq, afu->err_irq_name))) { + kfree(afu->err_irq_name); + afu->err_irq_name = NULL; + return rc; + } + + serr = cxl_p1n_read(afu, CXL_PSL_SERR_An); + serr = (serr & 0x00ffffffffff0000ULL) | (afu->serr_hwirq & 0xffff); + cxl_p1n_write(afu, CXL_PSL_SERR_An, serr); return 0; } +void cxl_native_release_serr_irq(struct cxl_afu *afu) +{ + if (afu->serr_virq != irq_find_mapping(NULL, afu->serr_hwirq)) + return; + + cxl_p1n_write(afu, CXL_PSL_SERR_An, 0x0000000000000000); + cxl_unmap_irq(afu->serr_virq, afu); + cxl_ops->release_one_irq(afu->adapter, afu->serr_hwirq); + kfree(afu->err_irq_name); +} + +int cxl_native_register_psl_irq(struct cxl_afu *afu) +{ + int rc; + + afu->psl_irq_name = kasprintf(GFP_KERNEL, "cxl-%s", + dev_name(&afu->dev)); + if (!afu->psl_irq_name) + return -ENOMEM; + + if ((rc = cxl_register_one_irq(afu->adapter, native_irq_multiplexed, + afu, &afu->native->psl_hwirq, &afu->native->psl_virq, + afu->psl_irq_name))) { + kfree(afu->psl_irq_name); + afu->psl_irq_name = NULL; + } + return rc; +} + +void cxl_native_release_psl_irq(struct cxl_afu *afu) +{ + if (afu->native->psl_virq != irq_find_mapping(NULL, afu->native->psl_hwirq)) + return; + + cxl_unmap_irq(afu->native->psl_virq, afu); + cxl_ops->release_one_irq(afu->adapter, afu->native->psl_hwirq); + kfree(afu->psl_irq_name); +} + static void recover_psl_err(struct cxl_afu *afu, u64 errstat) { u64 dsisr; @@ -769,7 +951,7 @@ static void recover_psl_err(struct cxl_afu *afu, u64 errstat) cxl_p2n_write(afu, CXL_PSL_ErrStat_An, errstat); } -int cxl_ack_irq(struct cxl_context *ctx, u64 tfc, u64 psl_reset_mask) +static int native_ack_irq(struct cxl_context *ctx, u64 tfc, u64 psl_reset_mask) { trace_cxl_psl_irq_ack(ctx, tfc); if (tfc) @@ -784,3 +966,132 @@ int cxl_check_error(struct cxl_afu *afu) { return (cxl_p1n_read(afu, CXL_PSL_SCNTL_An) == ~0ULL); } + +static bool native_support_attributes(const char *attr_name, + enum cxl_attrs type) +{ + return true; +} + +static int native_afu_cr_read64(struct cxl_afu *afu, int cr, u64 off, u64 *out) +{ + if (unlikely(!cxl_ops->link_ok(afu->adapter, afu))) + return -EIO; + if (unlikely(off >= afu->crs_len)) + return -ERANGE; + *out = in_le64(afu->native->afu_desc_mmio + afu->crs_offset + + (cr * afu->crs_len) + off); + return 0; +} + +static int native_afu_cr_read32(struct cxl_afu *afu, int cr, u64 off, u32 *out) +{ + if (unlikely(!cxl_ops->link_ok(afu->adapter, afu))) + return -EIO; + if (unlikely(off >= afu->crs_len)) + return -ERANGE; + *out = in_le32(afu->native->afu_desc_mmio + afu->crs_offset + + (cr * afu->crs_len) + off); + return 0; +} + +static int native_afu_cr_read16(struct cxl_afu *afu, int cr, u64 off, u16 *out) +{ + u64 aligned_off = off & ~0x3L; + u32 val; + int rc; + + rc = native_afu_cr_read32(afu, cr, aligned_off, &val); + if (!rc) + *out = (val >> ((off & 0x3) * 8)) & 0xffff; + return rc; +} + +static int native_afu_cr_read8(struct cxl_afu *afu, int cr, u64 off, u8 *out) +{ + u64 aligned_off = off & ~0x3L; + u32 val; + int rc; + + rc = native_afu_cr_read32(afu, cr, aligned_off, &val); + if (!rc) + *out = (val >> ((off & 0x3) * 8)) & 0xff; + return rc; +} + +static int native_afu_cr_write32(struct cxl_afu *afu, int cr, u64 off, u32 in) +{ + if (unlikely(!cxl_ops->link_ok(afu->adapter, afu))) + return -EIO; + if (unlikely(off >= afu->crs_len)) + return -ERANGE; + out_le32(afu->native->afu_desc_mmio + afu->crs_offset + + (cr * afu->crs_len) + off, in); + return 0; +} + +static int native_afu_cr_write16(struct cxl_afu *afu, int cr, u64 off, u16 in) +{ + u64 aligned_off = off & ~0x3L; + u32 val32, mask, shift; + int rc; + + rc = native_afu_cr_read32(afu, cr, aligned_off, &val32); + if (rc) + return rc; + shift = (off & 0x3) * 8; + WARN_ON(shift == 24); + mask = 0xffff << shift; + val32 = (val32 & ~mask) | (in << shift); + + rc = native_afu_cr_write32(afu, cr, aligned_off, val32); + return rc; +} + +static int native_afu_cr_write8(struct cxl_afu *afu, int cr, u64 off, u8 in) +{ + u64 aligned_off = off & ~0x3L; + u32 val32, mask, shift; + int rc; + + rc = native_afu_cr_read32(afu, cr, aligned_off, &val32); + if (rc) + return rc; + shift = (off & 0x3) * 8; + mask = 0xff << shift; + val32 = (val32 & ~mask) | (in << shift); + + rc = native_afu_cr_write32(afu, cr, aligned_off, val32); + return rc; +} + +const struct cxl_backend_ops cxl_native_ops = { + .module = THIS_MODULE, + .adapter_reset = cxl_pci_reset, + .alloc_one_irq = cxl_pci_alloc_one_irq, + .release_one_irq = cxl_pci_release_one_irq, + .alloc_irq_ranges = cxl_pci_alloc_irq_ranges, + .release_irq_ranges = cxl_pci_release_irq_ranges, + .setup_irq = cxl_pci_setup_irq, + .handle_psl_slice_error = native_handle_psl_slice_error, + .psl_interrupt = NULL, + .ack_irq = native_ack_irq, + .attach_process = native_attach_process, + .detach_process = native_detach_process, + .support_attributes = native_support_attributes, + .link_ok = cxl_adapter_link_ok, + .release_afu = cxl_pci_release_afu, + .afu_read_err_buffer = cxl_pci_afu_read_err_buffer, + .afu_check_and_enable = native_afu_check_and_enable, + .afu_activate_mode = native_afu_activate_mode, + .afu_deactivate_mode = native_afu_deactivate_mode, + .afu_reset = native_afu_reset, + .afu_cr_read8 = native_afu_cr_read8, + .afu_cr_read16 = native_afu_cr_read16, + .afu_cr_read32 = native_afu_cr_read32, + .afu_cr_read64 = native_afu_cr_read64, + .afu_cr_write8 = native_afu_cr_write8, + .afu_cr_write16 = native_afu_cr_write16, + .afu_cr_write32 = native_afu_cr_write32, + .read_adapter_vpd = cxl_pci_read_adapter_vpd, +}; diff --git a/drivers/misc/cxl/of.c b/drivers/misc/cxl/of.c new file mode 100644 index 0000000..edc4583 --- /dev/null +++ b/drivers/misc/cxl/of.c @@ -0,0 +1,513 @@ +/* + * Copyright 2015 IBM Corp. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> + +#include "cxl.h" + + +static const __be32 *read_prop_string(const struct device_node *np, + const char *prop_name) +{ + const __be32 *prop; + + prop = of_get_property(np, prop_name, NULL); + if (cxl_verbose && prop) + pr_info("%s: %s\n", prop_name, (char *) prop); + return prop; +} + +static const __be32 *read_prop_dword(const struct device_node *np, + const char *prop_name, u32 *val) +{ + const __be32 *prop; + + prop = of_get_property(np, prop_name, NULL); + if (prop) + *val = be32_to_cpu(prop[0]); + if (cxl_verbose && prop) + pr_info("%s: %#x (%u)\n", prop_name, *val, *val); + return prop; +} + +static const __be64 *read_prop64_dword(const struct device_node *np, + const char *prop_name, u64 *val) +{ + const __be64 *prop; + + prop = of_get_property(np, prop_name, NULL); + if (prop) + *val = be64_to_cpu(prop[0]); + if (cxl_verbose && prop) + pr_info("%s: %#llx (%llu)\n", prop_name, *val, *val); + return prop; +} + + +static int read_handle(struct device_node *np, u64 *handle) +{ + const __be32 *prop; + u64 size; + + /* Get address and size of the node */ + prop = of_get_address(np, 0, &size, NULL); + if (size) + return -EINVAL; + + /* Helper to read a big number; size is in cells (not bytes) */ + *handle = of_read_number(prop, of_n_addr_cells(np)); + return 0; +} + +static int read_phys_addr(struct device_node *np, char *prop_name, + struct cxl_afu *afu) +{ + int i, len, entry_size, naddr, nsize, type; + u64 addr, size; + const __be32 *prop; + + naddr = of_n_addr_cells(np); + nsize = of_n_size_cells(np); + + prop = of_get_property(np, prop_name, &len); + if (prop) { + entry_size = naddr + nsize; + for (i = 0; i < (len / 4); i += entry_size, prop += entry_size) { + type = be32_to_cpu(prop[0]); + addr = of_read_number(prop, naddr); + size = of_read_number(&prop[naddr], nsize); + switch (type) { + case 0: /* unit address */ + afu->guest->handle = addr; + break; + case 1: /* p2 area */ + afu->guest->p2n_phys += addr; + afu->guest->p2n_size = size; + break; + case 2: /* problem state area */ + afu->psn_phys += addr; + afu->adapter->ps_size = size; + break; + default: + pr_err("Invalid address type %d found in %s property of AFU\n", + type, prop_name); + return -EINVAL; + } + if (cxl_verbose) + pr_info("%s: %#x %#llx (size %#llx)\n", + prop_name, type, addr, size); + } + } + return 0; +} + +static int read_vpd(struct cxl *adapter, struct cxl_afu *afu) +{ + char vpd[256]; + int rc; + size_t len = sizeof(vpd); + + memset(vpd, 0, len); + + if (adapter) + rc = cxl_guest_read_adapter_vpd(adapter, vpd, len); + else + rc = cxl_guest_read_afu_vpd(afu, vpd, len); + + if (rc > 0) { + cxl_dump_debug_buffer(vpd, rc); + rc = 0; + } + return rc; +} + +int cxl_of_read_afu_handle(struct cxl_afu *afu, struct device_node *afu_np) +{ + if (read_handle(afu_np, &afu->guest->handle)) + return -EINVAL; + pr_devel("AFU handle: 0x%.16llx\n", afu->guest->handle); + + return 0; +} + +int cxl_of_read_afu_properties(struct cxl_afu *afu, struct device_node *np) +{ + int i, len, rc; + char *p; + const __be32 *prop; + u16 device_id, vendor_id; + u32 val = 0, class_code; + + /* Properties are read in the same order as listed in PAPR */ + + if (cxl_verbose) { + pr_info("Dump of the 'ibm,coherent-platform-function' node properties:\n"); + + prop = of_get_property(np, "compatible", &len); + i = 0; + while (i < len) { + p = (char *) prop + i; + pr_info("compatible: %s\n", p); + i += strlen(p) + 1; + } + read_prop_string(np, "name"); + } + + rc = read_phys_addr(np, "reg", afu); + if (rc) + return rc; + + rc = read_phys_addr(np, "assigned-addresses", afu); + if (rc) + return rc; + + if (afu->psn_phys == 0) + afu->psa = false; + else + afu->psa = true; + + if (cxl_verbose) { + read_prop_string(np, "ibm,loc-code"); + read_prop_string(np, "device_type"); + } + + read_prop_dword(np, "ibm,#processes", &afu->max_procs_virtualised); + + if (cxl_verbose) { + read_prop_dword(np, "ibm,scratchpad-size", &val); + read_prop_dword(np, "ibm,programmable", &val); + read_prop_string(np, "ibm,phandle"); + read_vpd(NULL, afu); + } + + read_prop_dword(np, "ibm,max-ints-per-process", &afu->guest->max_ints); + afu->irqs_max = afu->guest->max_ints; + + prop = read_prop_dword(np, "ibm,min-ints-per-process", &afu->pp_irqs); + if (prop) { + /* One extra interrupt for the PSL interrupt is already + * included. Remove it now to keep only AFU interrupts and + * match the native case. + */ + afu->pp_irqs--; + } + + if (cxl_verbose) { + read_prop_dword(np, "ibm,max-ints", &val); + read_prop_dword(np, "ibm,vpd-size", &val); + } + + read_prop64_dword(np, "ibm,error-buffer-size", &afu->eb_len); + afu->eb_offset = 0; + + if (cxl_verbose) + read_prop_dword(np, "ibm,config-record-type", &val); + + read_prop64_dword(np, "ibm,config-record-size", &afu->crs_len); + afu->crs_offset = 0; + + read_prop_dword(np, "ibm,#config-records", &afu->crs_num); + + if (cxl_verbose) { + for (i = 0; i < afu->crs_num; i++) { + rc = cxl_ops->afu_cr_read16(afu, i, PCI_DEVICE_ID, + &device_id); + if (!rc) + pr_info("record %d - device-id: %#x\n", + i, device_id); + rc = cxl_ops->afu_cr_read16(afu, i, PCI_VENDOR_ID, + &vendor_id); + if (!rc) + pr_info("record %d - vendor-id: %#x\n", + i, vendor_id); + rc = cxl_ops->afu_cr_read32(afu, i, PCI_CLASS_REVISION, + &class_code); + if (!rc) { + class_code >>= 8; + pr_info("record %d - class-code: %#x\n", + i, class_code); + } + } + + read_prop_dword(np, "ibm,function-number", &val); + read_prop_dword(np, "ibm,privileged-function", &val); + read_prop_dword(np, "vendor-id", &val); + read_prop_dword(np, "device-id", &val); + read_prop_dword(np, "revision-id", &val); + read_prop_dword(np, "class-code", &val); + read_prop_dword(np, "subsystem-vendor-id", &val); + read_prop_dword(np, "subsystem-id", &val); + } + /* + * if "ibm,process-mmio" doesn't exist then per-process mmio is + * not supported + */ + val = 0; + prop = read_prop_dword(np, "ibm,process-mmio", &val); + if (prop && val == 1) + afu->pp_psa = true; + else + afu->pp_psa = false; + + if (cxl_verbose) { + read_prop_dword(np, "ibm,supports-aur", &val); + read_prop_dword(np, "ibm,supports-csrp", &val); + read_prop_dword(np, "ibm,supports-prr", &val); + } + + prop = read_prop_dword(np, "ibm,function-error-interrupt", &val); + if (prop) + afu->serr_hwirq = val; + + pr_devel("AFU handle: %#llx\n", afu->guest->handle); + pr_devel("p2n_phys: %#llx (size %#llx)\n", + afu->guest->p2n_phys, afu->guest->p2n_size); + pr_devel("psn_phys: %#llx (size %#llx)\n", + afu->psn_phys, afu->adapter->ps_size); + pr_devel("Max number of processes virtualised=%i\n", + afu->max_procs_virtualised); + pr_devel("Per-process irqs min=%i, max=%i\n", afu->pp_irqs, + afu->irqs_max); + pr_devel("Slice error interrupt=%#lx\n", afu->serr_hwirq); + + return 0; +} + +static int read_adapter_irq_config(struct cxl *adapter, struct device_node *np) +{ + const __be32 *ranges; + int len, nranges, i; + struct irq_avail *cur; + + ranges = of_get_property(np, "interrupt-ranges", &len); + if (ranges == NULL || len < (2 * sizeof(int))) + return -EINVAL; + + /* + * encoded array of two cells per entry, each cell encoded as + * with encode-int + */ + nranges = len / (2 * sizeof(int)); + if (nranges == 0 || (nranges * 2 * sizeof(int)) != len) + return -EINVAL; + + adapter->guest->irq_avail = kzalloc(nranges * sizeof(struct irq_avail), + GFP_KERNEL); + if (adapter->guest->irq_avail == NULL) + return -ENOMEM; + + adapter->guest->irq_base_offset = be32_to_cpu(ranges[0]); + for (i = 0; i < nranges; i++) { + cur = &adapter->guest->irq_avail[i]; + cur->offset = be32_to_cpu(ranges[i * 2]); + cur->range = be32_to_cpu(ranges[i * 2 + 1]); + cur->bitmap = kcalloc(BITS_TO_LONGS(cur->range), + sizeof(*cur->bitmap), GFP_KERNEL); + if (cur->bitmap == NULL) + goto err; + if (cur->offset < adapter->guest->irq_base_offset) + adapter->guest->irq_base_offset = cur->offset; + if (cxl_verbose) + pr_info("available IRQ range: %#lx-%#lx (%lu)\n", + cur->offset, cur->offset + cur->range - 1, + cur->range); + } + adapter->guest->irq_nranges = nranges; + spin_lock_init(&adapter->guest->irq_alloc_lock); + + return 0; +err: + for (i--; i >= 0; i--) { + cur = &adapter->guest->irq_avail[i]; + kfree(cur->bitmap); + } + kfree(adapter->guest->irq_avail); + adapter->guest->irq_avail = NULL; + return -ENOMEM; +} + +int cxl_of_read_adapter_handle(struct cxl *adapter, struct device_node *np) +{ + if (read_handle(np, &adapter->guest->handle)) + return -EINVAL; + pr_devel("Adapter handle: 0x%.16llx\n", adapter->guest->handle); + + return 0; +} + +int cxl_of_read_adapter_properties(struct cxl *adapter, struct device_node *np) +{ + int rc, len, naddr, i; + char *p; + const __be32 *prop; + u32 val = 0; + + /* Properties are read in the same order as listed in PAPR */ + + naddr = of_n_addr_cells(np); + + if (cxl_verbose) { + pr_info("Dump of the 'ibm,coherent-platform-facility' node properties:\n"); + + read_prop_dword(np, "#address-cells", &val); + read_prop_dword(np, "#size-cells", &val); + + prop = of_get_property(np, "compatible", &len); + i = 0; + while (i < len) { + p = (char *) prop + i; + pr_info("compatible: %s\n", p); + i += strlen(p) + 1; + } + read_prop_string(np, "name"); + read_prop_string(np, "model"); + + prop = of_get_property(np, "reg", NULL); + if (prop) { + pr_info("reg: addr:%#llx size:%#x\n", + of_read_number(prop, naddr), + be32_to_cpu(prop[naddr])); + } + + read_prop_string(np, "ibm,loc-code"); + } + + if ((rc = read_adapter_irq_config(adapter, np))) + return rc; + + if (cxl_verbose) { + read_prop_string(np, "device_type"); + read_prop_string(np, "ibm,phandle"); + } + + prop = read_prop_dword(np, "ibm,caia-version", &val); + if (prop) { + adapter->caia_major = (val & 0xFF00) >> 8; + adapter->caia_minor = val & 0xFF; + } + + prop = read_prop_dword(np, "ibm,psl-revision", &val); + if (prop) + adapter->psl_rev = val; + + prop = read_prop_string(np, "status"); + if (prop) { + adapter->guest->status = kasprintf(GFP_KERNEL, "%s", (char *) prop); + if (adapter->guest->status == NULL) + return -ENOMEM; + } + + prop = read_prop_dword(np, "vendor-id", &val); + if (prop) + adapter->guest->vendor = val; + + prop = read_prop_dword(np, "device-id", &val); + if (prop) + adapter->guest->device = val; + + if (cxl_verbose) { + read_prop_dword(np, "ibm,privileged-facility", &val); + read_prop_dword(np, "revision-id", &val); + read_prop_dword(np, "class-code", &val); + } + + prop = read_prop_dword(np, "subsystem-vendor-id", &val); + if (prop) + adapter->guest->subsystem_vendor = val; + + prop = read_prop_dword(np, "subsystem-id", &val); + if (prop) + adapter->guest->subsystem = val; + + if (cxl_verbose) + read_vpd(adapter, NULL); + + return 0; +} + +static int cxl_of_remove(struct platform_device *pdev) +{ + struct cxl *adapter; + int afu; + + adapter = dev_get_drvdata(&pdev->dev); + for (afu = 0; afu < adapter->slices; afu++) + cxl_guest_remove_afu(adapter->afu[afu]); + + cxl_guest_remove_adapter(adapter); + return 0; +} + +static void cxl_of_shutdown(struct platform_device *pdev) +{ + cxl_of_remove(pdev); +} + +int cxl_of_probe(struct platform_device *pdev) +{ + struct device_node *np = NULL; + struct device_node *afu_np = NULL; + struct cxl *adapter = NULL; + int ret; + int slice, slice_ok; + + pr_devel("in %s\n", __func__); + + np = pdev->dev.of_node; + if (np == NULL) + return -ENODEV; + + /* init adapter */ + adapter = cxl_guest_init_adapter(np, pdev); + if (IS_ERR(adapter)) { + dev_err(&pdev->dev, "guest_init_adapter failed: %li\n", PTR_ERR(adapter)); + return PTR_ERR(adapter); + } + + /* init afu */ + slice_ok = 0; + for (afu_np = NULL, slice = 0; (afu_np = of_get_next_child(np, afu_np)); slice++) { + if ((ret = cxl_guest_init_afu(adapter, slice, afu_np))) + dev_err(&pdev->dev, "AFU %i failed to initialise: %i\n", + slice, ret); + else + slice_ok++; + } + + if (slice_ok == 0) { + dev_info(&pdev->dev, "No active AFU"); + adapter->slices = 0; + } + + if (afu_np) + of_node_put(afu_np); + return 0; +} + +static const struct of_device_id cxl_of_match[] = { + { .compatible = "ibm,coherent-platform-facility",}, + {}, +}; +MODULE_DEVICE_TABLE(of, cxl_of_match); + +struct platform_driver cxl_of_driver = { + .driver = { + .name = "cxl_of", + .of_match_table = cxl_of_match, + .owner = THIS_MODULE + }, + .probe = cxl_of_probe, + .remove = cxl_of_remove, + .shutdown = cxl_of_shutdown, +}; diff --git a/drivers/misc/cxl/pci.c b/drivers/misc/cxl/pci.c index 4c1903f..2844e97 100644 --- a/drivers/misc/cxl/pci.c +++ b/drivers/misc/cxl/pci.c @@ -19,7 +19,6 @@ #include <linux/delay.h> #include <asm/opal.h> #include <asm/msi_bitmap.h> -#include <asm/pci-bridge.h> /* for struct pci_controller */ #include <asm/pnv-pci.h> #include <asm/io.h> @@ -90,8 +89,8 @@ /* This works a little different than the p1/p2 register accesses to make it * easier to pull out individual fields */ -#define AFUD_READ(afu, off) in_be64(afu->afu_desc_mmio + off) -#define AFUD_READ_LE(afu, off) in_le64(afu->afu_desc_mmio + off) +#define AFUD_READ(afu, off) in_be64(afu->native->afu_desc_mmio + off) +#define AFUD_READ_LE(afu, off) in_le64(afu->native->afu_desc_mmio + off) #define EXTRACT_PPC_BIT(val, bit) (!!(val & PPC_BIT(bit))) #define EXTRACT_PPC_BITS(val, bs, be) ((val & PPC_BITMASK(bs, be)) >> PPC_BITLSHIFT(be)) @@ -116,24 +115,6 @@ #define AFUD_EB_LEN(val) EXTRACT_PPC_BITS(val, 8, 63) #define AFUD_READ_EB_OFF(afu) AFUD_READ(afu, 0x48) -u16 cxl_afu_cr_read16(struct cxl_afu *afu, int cr, u64 off) -{ - u64 aligned_off = off & ~0x3L; - u32 val; - - val = cxl_afu_cr_read32(afu, cr, aligned_off); - return (val >> ((off & 0x2) * 8)) & 0xffff; -} - -u8 cxl_afu_cr_read8(struct cxl_afu *afu, int cr, u64 off) -{ - u64 aligned_off = off & ~0x3L; - u32 val; - - val = cxl_afu_cr_read32(afu, cr, aligned_off); - return (val >> ((off & 0x3) * 8)) & 0xff; -} - static const struct pci_device_id cxl_pci_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_IBM, 0x0477), }, { PCI_DEVICE(PCI_VENDOR_ID_IBM, 0x044b), }, @@ -415,7 +396,7 @@ static int cxl_setup_psl_timebase(struct cxl *adapter, struct pci_dev *dev) delta = mftb() - psl_tb; if (delta < 0) delta = -delta; - } while (cputime_to_usecs(delta) > 16); + } while (tb_to_ns(delta) > 16000); return 0; } @@ -433,8 +414,8 @@ static int init_implementation_afu_regs(struct cxl_afu *afu) return 0; } -int cxl_setup_irq(struct cxl *adapter, unsigned int hwirq, - unsigned int virq) +int cxl_pci_setup_irq(struct cxl *adapter, unsigned int hwirq, + unsigned int virq) { struct pci_dev *dev = to_pci_dev(adapter->dev.parent); @@ -476,28 +457,30 @@ int cxl_update_image_control(struct cxl *adapter) return 0; } -int cxl_alloc_one_irq(struct cxl *adapter) +int cxl_pci_alloc_one_irq(struct cxl *adapter) { struct pci_dev *dev = to_pci_dev(adapter->dev.parent); return pnv_cxl_alloc_hwirqs(dev, 1); } -void cxl_release_one_irq(struct cxl *adapter, int hwirq) +void cxl_pci_release_one_irq(struct cxl *adapter, int hwirq) { struct pci_dev *dev = to_pci_dev(adapter->dev.parent); return pnv_cxl_release_hwirqs(dev, hwirq, 1); } -int cxl_alloc_irq_ranges(struct cxl_irq_ranges *irqs, struct cxl *adapter, unsigned int num) +int cxl_pci_alloc_irq_ranges(struct cxl_irq_ranges *irqs, + struct cxl *adapter, unsigned int num) { struct pci_dev *dev = to_pci_dev(adapter->dev.parent); return pnv_cxl_alloc_hwirq_ranges(irqs, dev, num); } -void cxl_release_irq_ranges(struct cxl_irq_ranges *irqs, struct cxl *adapter) +void cxl_pci_release_irq_ranges(struct cxl_irq_ranges *irqs, + struct cxl *adapter) { struct pci_dev *dev = to_pci_dev(adapter->dev.parent); @@ -558,7 +541,7 @@ static int switch_card_to_cxl(struct pci_dev *dev) return 0; } -static int cxl_map_slice_regs(struct cxl_afu *afu, struct cxl *adapter, struct pci_dev *dev) +static int pci_map_slice_regs(struct cxl_afu *afu, struct cxl *adapter, struct pci_dev *dev) { u64 p1n_base, p2n_base, afu_desc; const u64 p1n_size = 0x100; @@ -566,15 +549,15 @@ static int cxl_map_slice_regs(struct cxl_afu *afu, struct cxl *adapter, struct p p1n_base = p1_base(dev) + 0x10000 + (afu->slice * p1n_size); p2n_base = p2_base(dev) + (afu->slice * p2n_size); - afu->psn_phys = p2_base(dev) + (adapter->ps_off + (afu->slice * adapter->ps_size)); - afu_desc = p2_base(dev) + adapter->afu_desc_off + (afu->slice * adapter->afu_desc_size); + afu->psn_phys = p2_base(dev) + (adapter->native->ps_off + (afu->slice * adapter->ps_size)); + afu_desc = p2_base(dev) + adapter->native->afu_desc_off + (afu->slice * adapter->native->afu_desc_size); - if (!(afu->p1n_mmio = ioremap(p1n_base, p1n_size))) + if (!(afu->native->p1n_mmio = ioremap(p1n_base, p1n_size))) goto err; if (!(afu->p2n_mmio = ioremap(p2n_base, p2n_size))) goto err1; if (afu_desc) { - if (!(afu->afu_desc_mmio = ioremap(afu_desc, adapter->afu_desc_size))) + if (!(afu->native->afu_desc_mmio = ioremap(afu_desc, adapter->native->afu_desc_size))) goto err2; } @@ -582,62 +565,41 @@ static int cxl_map_slice_regs(struct cxl_afu *afu, struct cxl *adapter, struct p err2: iounmap(afu->p2n_mmio); err1: - iounmap(afu->p1n_mmio); + iounmap(afu->native->p1n_mmio); err: dev_err(&afu->dev, "Error mapping AFU MMIO regions\n"); return -ENOMEM; } -static void cxl_unmap_slice_regs(struct cxl_afu *afu) +static void pci_unmap_slice_regs(struct cxl_afu *afu) { if (afu->p2n_mmio) { iounmap(afu->p2n_mmio); afu->p2n_mmio = NULL; } - if (afu->p1n_mmio) { - iounmap(afu->p1n_mmio); - afu->p1n_mmio = NULL; + if (afu->native->p1n_mmio) { + iounmap(afu->native->p1n_mmio); + afu->native->p1n_mmio = NULL; } - if (afu->afu_desc_mmio) { - iounmap(afu->afu_desc_mmio); - afu->afu_desc_mmio = NULL; + if (afu->native->afu_desc_mmio) { + iounmap(afu->native->afu_desc_mmio); + afu->native->afu_desc_mmio = NULL; } } -static void cxl_release_afu(struct device *dev) +void cxl_pci_release_afu(struct device *dev) { struct cxl_afu *afu = to_cxl_afu(dev); - pr_devel("cxl_release_afu\n"); + pr_devel("%s\n", __func__); idr_destroy(&afu->contexts_idr); cxl_release_spa(afu); + kfree(afu->native); kfree(afu); } -static struct cxl_afu *cxl_alloc_afu(struct cxl *adapter, int slice) -{ - struct cxl_afu *afu; - - if (!(afu = kzalloc(sizeof(struct cxl_afu), GFP_KERNEL))) - return NULL; - - afu->adapter = adapter; - afu->dev.parent = &adapter->dev; - afu->dev.release = cxl_release_afu; - afu->slice = slice; - idr_init(&afu->contexts_idr); - mutex_init(&afu->contexts_lock); - spin_lock_init(&afu->afu_cntl_lock); - mutex_init(&afu->spa_mutex); - - afu->prefault_mode = CXL_PREFAULT_NONE; - afu->irqs_max = afu->adapter->user_irqs; - - return afu; -} - /* Expects AFU struct to have recently been zeroed out */ static int cxl_read_afu_descriptor(struct cxl_afu *afu) { @@ -659,7 +621,7 @@ static int cxl_read_afu_descriptor(struct cxl_afu *afu) afu->pp_size = AFUD_PPPSA_LEN(val) * 4096; afu->psa = AFUD_PPPSA_PSA(val); if ((afu->pp_psa = AFUD_PPPSA_PP(val))) - afu->pp_offset = AFUD_READ_PPPSA_OFF(afu); + afu->native->pp_offset = AFUD_READ_PPPSA_OFF(afu); val = AFUD_READ_CR(afu); afu->crs_len = AFUD_CR_LEN(val) * 256; @@ -686,10 +648,11 @@ static int cxl_read_afu_descriptor(struct cxl_afu *afu) static int cxl_afu_descriptor_looks_ok(struct cxl_afu *afu) { - int i; + int i, rc; + u32 val; if (afu->psa && afu->adapter->ps_size < - (afu->pp_offset + afu->pp_size*afu->max_procs_virtualised)) { + (afu->native->pp_offset + afu->pp_size*afu->max_procs_virtualised)) { dev_err(&afu->dev, "per-process PSA can't fit inside the PSA!\n"); return -ENODEV; } @@ -698,7 +661,8 @@ static int cxl_afu_descriptor_looks_ok(struct cxl_afu *afu) dev_warn(&afu->dev, "AFU uses < PAGE_SIZE per-process PSA!"); for (i = 0; i < afu->crs_num; i++) { - if ((cxl_afu_cr_read32(afu, i, 0) == 0)) { + rc = cxl_ops->afu_cr_read32(afu, i, 0, &val); + if (rc || val == 0) { dev_err(&afu->dev, "ABORTING: AFU configuration record %i is invalid\n", i); return -EINVAL; } @@ -719,7 +683,7 @@ static int sanitise_afu_regs(struct cxl_afu *afu) reg = cxl_p2n_read(afu, CXL_AFU_Cntl_An); if ((reg & CXL_AFU_Cntl_An_ES_MASK) != CXL_AFU_Cntl_An_ES_Disabled) { dev_warn(&afu->dev, "WARNING: AFU was not disabled: %#016llx\n", reg); - if (__cxl_afu_reset(afu)) + if (cxl_ops->afu_reset(afu)) return -EIO; if (cxl_afu_disable(afu)) return -EIO; @@ -767,13 +731,13 @@ static int sanitise_afu_regs(struct cxl_afu *afu) * 4/8 bytes aligned access. So in case the requested offset/count arent 8 byte * aligned the function uses a bounce buffer which can be max PAGE_SIZE. */ -ssize_t cxl_afu_read_err_buffer(struct cxl_afu *afu, char *buf, +ssize_t cxl_pci_afu_read_err_buffer(struct cxl_afu *afu, char *buf, loff_t off, size_t count) { loff_t aligned_start, aligned_end; size_t aligned_length; void *tbuf; - const void __iomem *ebuf = afu->afu_desc_mmio + afu->eb_offset; + const void __iomem *ebuf = afu->native->afu_desc_mmio + afu->eb_offset; if (count == 0 || off < 0 || (size_t)off >= afu->eb_len) return 0; @@ -804,18 +768,18 @@ ssize_t cxl_afu_read_err_buffer(struct cxl_afu *afu, char *buf, return count; } -static int cxl_configure_afu(struct cxl_afu *afu, struct cxl *adapter, struct pci_dev *dev) +static int pci_configure_afu(struct cxl_afu *afu, struct cxl *adapter, struct pci_dev *dev) { int rc; - if ((rc = cxl_map_slice_regs(afu, adapter, dev))) + if ((rc = pci_map_slice_regs(afu, adapter, dev))) return rc; if ((rc = sanitise_afu_regs(afu))) goto err1; /* We need to reset the AFU before we can read the AFU descriptor */ - if ((rc = __cxl_afu_reset(afu))) + if ((rc = cxl_ops->afu_reset(afu))) goto err1; if (cxl_verbose) @@ -830,44 +794,50 @@ static int cxl_configure_afu(struct cxl_afu *afu, struct cxl *adapter, struct pc if ((rc = init_implementation_afu_regs(afu))) goto err1; - if ((rc = cxl_register_serr_irq(afu))) + if ((rc = cxl_native_register_serr_irq(afu))) goto err1; - if ((rc = cxl_register_psl_irq(afu))) + if ((rc = cxl_native_register_psl_irq(afu))) goto err2; return 0; err2: - cxl_release_serr_irq(afu); + cxl_native_release_serr_irq(afu); err1: - cxl_unmap_slice_regs(afu); + pci_unmap_slice_regs(afu); return rc; } -static void cxl_deconfigure_afu(struct cxl_afu *afu) +static void pci_deconfigure_afu(struct cxl_afu *afu) { - cxl_release_psl_irq(afu); - cxl_release_serr_irq(afu); - cxl_unmap_slice_regs(afu); + cxl_native_release_psl_irq(afu); + cxl_native_release_serr_irq(afu); + pci_unmap_slice_regs(afu); } -static int cxl_init_afu(struct cxl *adapter, int slice, struct pci_dev *dev) +static int pci_init_afu(struct cxl *adapter, int slice, struct pci_dev *dev) { struct cxl_afu *afu; - int rc; + int rc = -ENOMEM; afu = cxl_alloc_afu(adapter, slice); if (!afu) return -ENOMEM; + afu->native = kzalloc(sizeof(struct cxl_afu_native), GFP_KERNEL); + if (!afu->native) + goto err_free_afu; + + mutex_init(&afu->native->spa_mutex); + rc = dev_set_name(&afu->dev, "afu%i.%i", adapter->adapter_num, slice); if (rc) - goto err_free; + goto err_free_native; - rc = cxl_configure_afu(afu, adapter, dev); + rc = pci_configure_afu(afu, adapter, dev); if (rc) - goto err_free; + goto err_free_native; /* Don't care if this fails */ cxl_debugfs_afu_add(afu); @@ -890,24 +860,27 @@ static int cxl_init_afu(struct cxl *adapter, int slice, struct pci_dev *dev) return 0; err_put1: - cxl_deconfigure_afu(afu); + pci_deconfigure_afu(afu); cxl_debugfs_afu_remove(afu); device_unregister(&afu->dev); return rc; -err_free: +err_free_native: + kfree(afu->native); +err_free_afu: kfree(afu); return rc; } -static void cxl_remove_afu(struct cxl_afu *afu) +static void cxl_pci_remove_afu(struct cxl_afu *afu) { - pr_devel("cxl_remove_afu\n"); + pr_devel("%s\n", __func__); if (!afu) return; + cxl_pci_vphb_remove(afu); cxl_sysfs_afu_remove(afu); cxl_debugfs_afu_remove(afu); @@ -916,13 +889,13 @@ static void cxl_remove_afu(struct cxl_afu *afu) spin_unlock(&afu->adapter->afu_list_lock); cxl_context_detach_all(afu); - cxl_afu_deactivate_mode(afu); + cxl_ops->afu_deactivate_mode(afu, afu->current_mode); - cxl_deconfigure_afu(afu); + pci_deconfigure_afu(afu); device_unregister(&afu->dev); } -int cxl_reset(struct cxl *adapter) +int cxl_pci_reset(struct cxl *adapter) { struct pci_dev *dev = to_pci_dev(adapter->dev.parent); int rc; @@ -956,17 +929,17 @@ static int cxl_map_adapter_regs(struct cxl *adapter, struct pci_dev *dev) pr_devel("cxl_map_adapter_regs: p1: %#016llx %#llx, p2: %#016llx %#llx", p1_base(dev), p1_size(dev), p2_base(dev), p2_size(dev)); - if (!(adapter->p1_mmio = ioremap(p1_base(dev), p1_size(dev)))) + if (!(adapter->native->p1_mmio = ioremap(p1_base(dev), p1_size(dev)))) goto err3; - if (!(adapter->p2_mmio = ioremap(p2_base(dev), p2_size(dev)))) + if (!(adapter->native->p2_mmio = ioremap(p2_base(dev), p2_size(dev)))) goto err4; return 0; err4: - iounmap(adapter->p1_mmio); - adapter->p1_mmio = NULL; + iounmap(adapter->native->p1_mmio); + adapter->native->p1_mmio = NULL; err3: pci_release_region(dev, 0); err2: @@ -977,14 +950,14 @@ err1: static void cxl_unmap_adapter_regs(struct cxl *adapter) { - if (adapter->p1_mmio) { - iounmap(adapter->p1_mmio); - adapter->p1_mmio = NULL; + if (adapter->native->p1_mmio) { + iounmap(adapter->native->p1_mmio); + adapter->native->p1_mmio = NULL; pci_release_region(to_pci_dev(adapter->dev.parent), 2); } - if (adapter->p2_mmio) { - iounmap(adapter->p2_mmio); - adapter->p2_mmio = NULL; + if (adapter->native->p2_mmio) { + iounmap(adapter->native->p2_mmio); + adapter->native->p2_mmio = NULL; pci_release_region(to_pci_dev(adapter->dev.parent), 0); } } @@ -1025,10 +998,10 @@ static int cxl_read_vsec(struct cxl *adapter, struct pci_dev *dev) /* Convert everything to bytes, because there is NO WAY I'd look at the * code a month later and forget what units these are in ;-) */ - adapter->ps_off = ps_off * 64 * 1024; + adapter->native->ps_off = ps_off * 64 * 1024; adapter->ps_size = ps_size * 64 * 1024; - adapter->afu_desc_off = afu_desc_off * 64 * 1024; - adapter->afu_desc_size = afu_desc_size *64 * 1024; + adapter->native->afu_desc_off = afu_desc_off * 64 * 1024; + adapter->native->afu_desc_size = afu_desc_size * 64 * 1024; /* Total IRQs - 1 PSL ERROR - #AFU*(1 slice error + 1 DSI) */ adapter->user_irqs = pnv_cxl_get_irq_count(dev) - 1 - 2*adapter->slices; @@ -1079,21 +1052,26 @@ static int cxl_vsec_looks_ok(struct cxl *adapter, struct pci_dev *dev) return -EINVAL; } - if (!adapter->afu_desc_off || !adapter->afu_desc_size) { + if (!adapter->native->afu_desc_off || !adapter->native->afu_desc_size) { dev_err(&dev->dev, "ABORTING: VSEC shows no AFU descriptors\n"); return -EINVAL; } - if (adapter->ps_size > p2_size(dev) - adapter->ps_off) { + if (adapter->ps_size > p2_size(dev) - adapter->native->ps_off) { dev_err(&dev->dev, "ABORTING: Problem state size larger than " "available in BAR2: 0x%llx > 0x%llx\n", - adapter->ps_size, p2_size(dev) - adapter->ps_off); + adapter->ps_size, p2_size(dev) - adapter->native->ps_off); return -EINVAL; } return 0; } +ssize_t cxl_pci_read_adapter_vpd(struct cxl *adapter, void *buf, size_t len) +{ + return pci_read_vpd(to_pci_dev(adapter->dev.parent), 0, len, buf); +} + static void cxl_release_adapter(struct device *dev) { struct cxl *adapter = to_cxl_adapter(dev); @@ -1102,33 +1080,10 @@ static void cxl_release_adapter(struct device *dev) cxl_remove_adapter_nr(adapter); + kfree(adapter->native); kfree(adapter); } -static struct cxl *cxl_alloc_adapter(void) -{ - struct cxl *adapter; - - if (!(adapter = kzalloc(sizeof(struct cxl), GFP_KERNEL))) - return NULL; - - spin_lock_init(&adapter->afu_list_lock); - - if (cxl_alloc_adapter_nr(adapter)) - goto err1; - - if (dev_set_name(&adapter->dev, "card%i", adapter->adapter_num)) - goto err2; - - return adapter; - -err2: - cxl_remove_adapter_nr(adapter); -err1: - kfree(adapter); - return NULL; -} - #define CXL_PSL_ErrIVTE_tberror (0x1ull << (63-31)) static int sanitise_adapter_regs(struct cxl *adapter) @@ -1192,7 +1147,7 @@ static int cxl_configure_adapter(struct cxl *adapter, struct pci_dev *dev) if ((rc = cxl_setup_psl_timebase(adapter, dev))) goto err; - if ((rc = cxl_register_psl_err_irq(adapter))) + if ((rc = cxl_native_register_psl_err_irq(adapter))) goto err; return 0; @@ -1207,13 +1162,13 @@ static void cxl_deconfigure_adapter(struct cxl *adapter) { struct pci_dev *pdev = to_pci_dev(adapter->dev.parent); - cxl_release_psl_err_irq(adapter); + cxl_native_release_psl_err_irq(adapter); cxl_unmap_adapter_regs(adapter); pci_disable_device(pdev); } -static struct cxl *cxl_init_adapter(struct pci_dev *dev) +static struct cxl *cxl_pci_init_adapter(struct pci_dev *dev) { struct cxl *adapter; int rc; @@ -1222,6 +1177,12 @@ static struct cxl *cxl_init_adapter(struct pci_dev *dev) if (!adapter) return ERR_PTR(-ENOMEM); + adapter->native = kzalloc(sizeof(struct cxl_native), GFP_KERNEL); + if (!adapter->native) { + rc = -ENOMEM; + goto err_release; + } + /* Set defaults for parameters which need to persist over * configure/reconfigure */ @@ -1231,8 +1192,7 @@ static struct cxl *cxl_init_adapter(struct pci_dev *dev) rc = cxl_configure_adapter(adapter, dev); if (rc) { pci_disable_device(dev); - cxl_release_adapter(&adapter->dev); - return ERR_PTR(rc); + goto err_release; } /* Don't care if this one fails: */ @@ -1258,9 +1218,13 @@ err_put1: cxl_deconfigure_adapter(adapter); device_unregister(&adapter->dev); return ERR_PTR(rc); + +err_release: + cxl_release_adapter(&adapter->dev); + return ERR_PTR(rc); } -static void cxl_remove_adapter(struct cxl *adapter) +static void cxl_pci_remove_adapter(struct cxl *adapter) { pr_devel("cxl_remove_adapter\n"); @@ -1278,17 +1242,22 @@ static int cxl_probe(struct pci_dev *dev, const struct pci_device_id *id) int slice; int rc; + if (cxl_pci_is_vphb_device(dev)) { + dev_dbg(&dev->dev, "cxl_init_adapter: Ignoring cxl vphb device\n"); + return -ENODEV; + } + if (cxl_verbose) dump_cxl_config_space(dev); - adapter = cxl_init_adapter(dev); + adapter = cxl_pci_init_adapter(dev); if (IS_ERR(adapter)) { dev_err(&dev->dev, "cxl_init_adapter failed: %li\n", PTR_ERR(adapter)); return PTR_ERR(adapter); } for (slice = 0; slice < adapter->slices; slice++) { - if ((rc = cxl_init_afu(adapter, slice, dev))) { + if ((rc = pci_init_afu(adapter, slice, dev))) { dev_err(&dev->dev, "AFU %i failed to initialise: %i\n", slice, rc); continue; } @@ -1313,10 +1282,9 @@ static void cxl_remove(struct pci_dev *dev) */ for (i = 0; i < adapter->slices; i++) { afu = adapter->afu[i]; - cxl_pci_vphb_remove(afu); - cxl_remove_afu(afu); + cxl_pci_remove_afu(afu); } - cxl_remove_adapter(adapter); + cxl_pci_remove_adapter(adapter); } static pci_ers_result_t cxl_vphb_error_detected(struct cxl_afu *afu, @@ -1462,8 +1430,8 @@ static pci_ers_result_t cxl_pci_error_detected(struct pci_dev *pdev, return result; cxl_context_detach_all(afu); - cxl_afu_deactivate_mode(afu); - cxl_deconfigure_afu(afu); + cxl_ops->afu_deactivate_mode(afu, afu->current_mode); + pci_deconfigure_afu(afu); } cxl_deconfigure_adapter(adapter); @@ -1486,14 +1454,12 @@ static pci_ers_result_t cxl_pci_slot_reset(struct pci_dev *pdev) for (i = 0; i < adapter->slices; i++) { afu = adapter->afu[i]; - if (cxl_configure_afu(afu, adapter, pdev)) + if (pci_configure_afu(afu, adapter, pdev)) goto err; if (cxl_afu_select_best_mode(afu)) goto err; - cxl_pci_vphb_reconfigure(afu); - list_for_each_entry(afu_dev, &afu->phb->bus->devices, bus_list) { /* Reset the device context. * TODO: make this less disruptive @@ -1509,7 +1475,7 @@ static pci_ers_result_t cxl_pci_slot_reset(struct pci_dev *pdev) afu_dev->dev.archdata.cxl_ctx = ctx; - if (cxl_afu_check_and_enable(afu)) + if (cxl_ops->afu_check_and_enable(afu)) goto err; afu_dev->error_state = pci_channel_io_normal; diff --git a/drivers/misc/cxl/sysfs.c b/drivers/misc/cxl/sysfs.c index 02006f71..25913c0 100644 --- a/drivers/misc/cxl/sysfs.c +++ b/drivers/misc/cxl/sysfs.c @@ -69,7 +69,7 @@ static ssize_t reset_adapter_store(struct device *device, if ((rc != 1) || (val != 1)) return -EINVAL; - if ((rc = cxl_reset(adapter))) + if ((rc = cxl_ops->adapter_reset(adapter))) return rc; return count; } @@ -165,7 +165,7 @@ static ssize_t pp_mmio_off_show(struct device *device, { struct cxl_afu *afu = to_afu_chardev_m(device); - return scnprintf(buf, PAGE_SIZE, "%llu\n", afu->pp_offset); + return scnprintf(buf, PAGE_SIZE, "%llu\n", afu->native->pp_offset); } static ssize_t pp_mmio_len_show(struct device *device, @@ -211,7 +211,7 @@ static ssize_t reset_store_afu(struct device *device, goto err; } - if ((rc = __cxl_afu_reset(afu))) + if ((rc = cxl_ops->afu_reset(afu))) goto err; rc = count; @@ -253,8 +253,14 @@ static ssize_t irqs_max_store(struct device *device, if (irqs_max < afu->pp_irqs) return -EINVAL; - if (irqs_max > afu->adapter->user_irqs) - return -EINVAL; + if (cpu_has_feature(CPU_FTR_HVMODE)) { + if (irqs_max > afu->adapter->user_irqs) + return -EINVAL; + } else { + /* pHyp sets a per-AFU limit */ + if (irqs_max > afu->guest->max_ints) + return -EINVAL; + } afu->irqs_max = irqs_max; return count; @@ -348,7 +354,7 @@ static ssize_t mode_store(struct device *device, struct device_attribute *attr, } /* - * cxl_afu_deactivate_mode needs to be done outside the lock, prevent + * afu_deactivate_mode needs to be done outside the lock, prevent * other contexts coming in before we are ready: */ old_mode = afu->current_mode; @@ -357,9 +363,9 @@ static ssize_t mode_store(struct device *device, struct device_attribute *attr, mutex_unlock(&afu->contexts_lock); - if ((rc = _cxl_afu_deactivate_mode(afu, old_mode))) + if ((rc = cxl_ops->afu_deactivate_mode(afu, old_mode))) return rc; - if ((rc = cxl_afu_activate_mode(afu, mode))) + if ((rc = cxl_ops->afu_activate_mode(afu, mode))) return rc; return count; @@ -386,10 +392,9 @@ static ssize_t afu_eb_read(struct file *filp, struct kobject *kobj, struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) { - struct cxl_afu *afu = to_cxl_afu(container_of(kobj, - struct device, kobj)); + struct cxl_afu *afu = to_cxl_afu(kobj_to_dev(kobj)); - return cxl_afu_read_err_buffer(afu, buf, off, count); + return cxl_ops->afu_read_err_buffer(afu, buf, off, count); } static struct device_attribute afu_attrs[] = { @@ -406,24 +411,39 @@ static struct device_attribute afu_attrs[] = { int cxl_sysfs_adapter_add(struct cxl *adapter) { + struct device_attribute *dev_attr; int i, rc; for (i = 0; i < ARRAY_SIZE(adapter_attrs); i++) { - if ((rc = device_create_file(&adapter->dev, &adapter_attrs[i]))) - goto err; + dev_attr = &adapter_attrs[i]; + if (cxl_ops->support_attributes(dev_attr->attr.name, + CXL_ADAPTER_ATTRS)) { + if ((rc = device_create_file(&adapter->dev, dev_attr))) + goto err; + } } return 0; err: - for (i--; i >= 0; i--) - device_remove_file(&adapter->dev, &adapter_attrs[i]); + for (i--; i >= 0; i--) { + dev_attr = &adapter_attrs[i]; + if (cxl_ops->support_attributes(dev_attr->attr.name, + CXL_ADAPTER_ATTRS)) + device_remove_file(&adapter->dev, dev_attr); + } return rc; } + void cxl_sysfs_adapter_remove(struct cxl *adapter) { + struct device_attribute *dev_attr; int i; - for (i = 0; i < ARRAY_SIZE(adapter_attrs); i++) - device_remove_file(&adapter->dev, &adapter_attrs[i]); + for (i = 0; i < ARRAY_SIZE(adapter_attrs); i++) { + dev_attr = &adapter_attrs[i]; + if (cxl_ops->support_attributes(dev_attr->attr.name, + CXL_ADAPTER_ATTRS)) + device_remove_file(&adapter->dev, dev_attr); + } } struct afu_config_record { @@ -467,12 +487,14 @@ static ssize_t afu_read_config(struct file *filp, struct kobject *kobj, loff_t off, size_t count) { struct afu_config_record *cr = to_cr(kobj); - struct cxl_afu *afu = to_cxl_afu(container_of(kobj->parent, struct device, kobj)); + struct cxl_afu *afu = to_cxl_afu(kobj_to_dev(kobj->parent)); - u64 i, j, val; + u64 i, j, val, rc; for (i = 0; i < count;) { - val = cxl_afu_cr_read64(afu, cr->cr, off & ~0x7); + rc = cxl_ops->afu_cr_read64(afu, cr->cr, off & ~0x7, &val); + if (rc) + val = ~0ULL; for (j = off & 0x7; j < 8 && i < count; i++, j++, off++) buf[i] = (val >> (j * 8)) & 0xff; } @@ -517,14 +539,22 @@ static struct afu_config_record *cxl_sysfs_afu_new_cr(struct cxl_afu *afu, int c return ERR_PTR(-ENOMEM); cr->cr = cr_idx; - cr->device = cxl_afu_cr_read16(afu, cr_idx, PCI_DEVICE_ID); - cr->vendor = cxl_afu_cr_read16(afu, cr_idx, PCI_VENDOR_ID); - cr->class = cxl_afu_cr_read32(afu, cr_idx, PCI_CLASS_REVISION) >> 8; + + rc = cxl_ops->afu_cr_read16(afu, cr_idx, PCI_DEVICE_ID, &cr->device); + if (rc) + goto err; + rc = cxl_ops->afu_cr_read16(afu, cr_idx, PCI_VENDOR_ID, &cr->vendor); + if (rc) + goto err; + rc = cxl_ops->afu_cr_read32(afu, cr_idx, PCI_CLASS_REVISION, &cr->class); + if (rc) + goto err; + cr->class >>= 8; /* * Export raw AFU PCIe like config record. For now this is read only by * root - we can expand that later to be readable by non-root and maybe - * even writable provided we have a good use-case. Once we suport + * even writable provided we have a good use-case. Once we support * exposing AFUs through a virtual PHB they will get that for free from * Linux' PCI infrastructure, but until then it's not clear that we * need it for anything since the main use case is just identifying @@ -562,6 +592,7 @@ err: void cxl_sysfs_afu_remove(struct cxl_afu *afu) { + struct device_attribute *dev_attr; struct afu_config_record *cr, *tmp; int i; @@ -569,8 +600,12 @@ void cxl_sysfs_afu_remove(struct cxl_afu *afu) if (afu->eb_len) device_remove_bin_file(&afu->dev, &afu->attr_eb); - for (i = 0; i < ARRAY_SIZE(afu_attrs); i++) - device_remove_file(&afu->dev, &afu_attrs[i]); + for (i = 0; i < ARRAY_SIZE(afu_attrs); i++) { + dev_attr = &afu_attrs[i]; + if (cxl_ops->support_attributes(dev_attr->attr.name, + CXL_AFU_ATTRS)) + device_remove_file(&afu->dev, &afu_attrs[i]); + } list_for_each_entry_safe(cr, tmp, &afu->crs, list) { sysfs_remove_bin_file(&cr->kobj, &cr->config_attr); @@ -580,14 +615,19 @@ void cxl_sysfs_afu_remove(struct cxl_afu *afu) int cxl_sysfs_afu_add(struct cxl_afu *afu) { + struct device_attribute *dev_attr; struct afu_config_record *cr; int i, rc; INIT_LIST_HEAD(&afu->crs); for (i = 0; i < ARRAY_SIZE(afu_attrs); i++) { - if ((rc = device_create_file(&afu->dev, &afu_attrs[i]))) - goto err; + dev_attr = &afu_attrs[i]; + if (cxl_ops->support_attributes(dev_attr->attr.name, + CXL_AFU_ATTRS)) { + if ((rc = device_create_file(&afu->dev, &afu_attrs[i]))) + goto err; + } } /* conditionally create the add the binary file for error info buffer */ @@ -626,32 +666,50 @@ err: /* reset the eb_len as we havent created the bin attr */ afu->eb_len = 0; - for (i--; i >= 0; i--) + for (i--; i >= 0; i--) { + dev_attr = &afu_attrs[i]; + if (cxl_ops->support_attributes(dev_attr->attr.name, + CXL_AFU_ATTRS)) device_remove_file(&afu->dev, &afu_attrs[i]); + } return rc; } int cxl_sysfs_afu_m_add(struct cxl_afu *afu) { + struct device_attribute *dev_attr; int i, rc; for (i = 0; i < ARRAY_SIZE(afu_master_attrs); i++) { - if ((rc = device_create_file(afu->chardev_m, &afu_master_attrs[i]))) - goto err; + dev_attr = &afu_master_attrs[i]; + if (cxl_ops->support_attributes(dev_attr->attr.name, + CXL_AFU_MASTER_ATTRS)) { + if ((rc = device_create_file(afu->chardev_m, &afu_master_attrs[i]))) + goto err; + } } return 0; err: - for (i--; i >= 0; i--) - device_remove_file(afu->chardev_m, &afu_master_attrs[i]); + for (i--; i >= 0; i--) { + dev_attr = &afu_master_attrs[i]; + if (cxl_ops->support_attributes(dev_attr->attr.name, + CXL_AFU_MASTER_ATTRS)) + device_remove_file(afu->chardev_m, &afu_master_attrs[i]); + } return rc; } void cxl_sysfs_afu_m_remove(struct cxl_afu *afu) { + struct device_attribute *dev_attr; int i; - for (i = 0; i < ARRAY_SIZE(afu_master_attrs); i++) - device_remove_file(afu->chardev_m, &afu_master_attrs[i]); + for (i = 0; i < ARRAY_SIZE(afu_master_attrs); i++) { + dev_attr = &afu_master_attrs[i]; + if (cxl_ops->support_attributes(dev_attr->attr.name, + CXL_AFU_MASTER_ATTRS)) + device_remove_file(afu->chardev_m, &afu_master_attrs[i]); + } } diff --git a/drivers/misc/cxl/trace.h b/drivers/misc/cxl/trace.h index 6e1e2ad..751d611 100644 --- a/drivers/misc/cxl/trace.h +++ b/drivers/misc/cxl/trace.h @@ -450,6 +450,199 @@ DEFINE_EVENT(cxl_pe_class, cxl_slbia, TP_ARGS(ctx) ); +TRACE_EVENT(cxl_hcall, + TP_PROTO(u64 unit_address, u64 process_token, long rc), + + TP_ARGS(unit_address, process_token, rc), + + TP_STRUCT__entry( + __field(u64, unit_address) + __field(u64, process_token) + __field(long, rc) + ), + + TP_fast_assign( + __entry->unit_address = unit_address; + __entry->process_token = process_token; + __entry->rc = rc; + ), + + TP_printk("unit_address=0x%016llx process_token=0x%016llx rc=%li", + __entry->unit_address, + __entry->process_token, + __entry->rc + ) +); + +TRACE_EVENT(cxl_hcall_control, + TP_PROTO(u64 unit_address, char *fct, u64 p1, u64 p2, u64 p3, + u64 p4, unsigned long r4, long rc), + + TP_ARGS(unit_address, fct, p1, p2, p3, p4, r4, rc), + + TP_STRUCT__entry( + __field(u64, unit_address) + __field(char *, fct) + __field(u64, p1) + __field(u64, p2) + __field(u64, p3) + __field(u64, p4) + __field(unsigned long, r4) + __field(long, rc) + ), + + TP_fast_assign( + __entry->unit_address = unit_address; + __entry->fct = fct; + __entry->p1 = p1; + __entry->p2 = p2; + __entry->p3 = p3; + __entry->p4 = p4; + __entry->r4 = r4; + __entry->rc = rc; + ), + + TP_printk("unit_address=%#.16llx %s(%#llx, %#llx, %#llx, %#llx, R4: %#lx)): %li", + __entry->unit_address, + __entry->fct, + __entry->p1, + __entry->p2, + __entry->p3, + __entry->p4, + __entry->r4, + __entry->rc + ) +); + +TRACE_EVENT(cxl_hcall_attach, + TP_PROTO(u64 unit_address, u64 phys_addr, unsigned long process_token, + unsigned long mmio_addr, unsigned long mmio_size, long rc), + + TP_ARGS(unit_address, phys_addr, process_token, + mmio_addr, mmio_size, rc), + + TP_STRUCT__entry( + __field(u64, unit_address) + __field(u64, phys_addr) + __field(unsigned long, process_token) + __field(unsigned long, mmio_addr) + __field(unsigned long, mmio_size) + __field(long, rc) + ), + + TP_fast_assign( + __entry->unit_address = unit_address; + __entry->phys_addr = phys_addr; + __entry->process_token = process_token; + __entry->mmio_addr = mmio_addr; + __entry->mmio_size = mmio_size; + __entry->rc = rc; + ), + + TP_printk("unit_address=0x%016llx phys_addr=0x%016llx " + "token=0x%.8lx mmio_addr=0x%lx mmio_size=0x%lx rc=%li", + __entry->unit_address, + __entry->phys_addr, + __entry->process_token, + __entry->mmio_addr, + __entry->mmio_size, + __entry->rc + ) +); + +DEFINE_EVENT(cxl_hcall, cxl_hcall_detach, + TP_PROTO(u64 unit_address, u64 process_token, long rc), + TP_ARGS(unit_address, process_token, rc) +); + +DEFINE_EVENT(cxl_hcall_control, cxl_hcall_control_function, + TP_PROTO(u64 unit_address, char *fct, u64 p1, u64 p2, u64 p3, + u64 p4, unsigned long r4, long rc), + TP_ARGS(unit_address, fct, p1, p2, p3, p4, r4, rc) +); + +DEFINE_EVENT(cxl_hcall, cxl_hcall_collect_int_info, + TP_PROTO(u64 unit_address, u64 process_token, long rc), + TP_ARGS(unit_address, process_token, rc) +); + +TRACE_EVENT(cxl_hcall_control_faults, + TP_PROTO(u64 unit_address, u64 process_token, + u64 control_mask, u64 reset_mask, unsigned long r4, + long rc), + + TP_ARGS(unit_address, process_token, + control_mask, reset_mask, r4, rc), + + TP_STRUCT__entry( + __field(u64, unit_address) + __field(u64, process_token) + __field(u64, control_mask) + __field(u64, reset_mask) + __field(unsigned long, r4) + __field(long, rc) + ), + + TP_fast_assign( + __entry->unit_address = unit_address; + __entry->process_token = process_token; + __entry->control_mask = control_mask; + __entry->reset_mask = reset_mask; + __entry->r4 = r4; + __entry->rc = rc; + ), + + TP_printk("unit_address=0x%016llx process_token=0x%llx " + "control_mask=%#llx reset_mask=%#llx r4=%#lx rc=%li", + __entry->unit_address, + __entry->process_token, + __entry->control_mask, + __entry->reset_mask, + __entry->r4, + __entry->rc + ) +); + +DEFINE_EVENT(cxl_hcall_control, cxl_hcall_control_facility, + TP_PROTO(u64 unit_address, char *fct, u64 p1, u64 p2, u64 p3, + u64 p4, unsigned long r4, long rc), + TP_ARGS(unit_address, fct, p1, p2, p3, p4, r4, rc) +); + +TRACE_EVENT(cxl_hcall_download_facility, + TP_PROTO(u64 unit_address, char *fct, u64 list_address, u64 num, + unsigned long r4, long rc), + + TP_ARGS(unit_address, fct, list_address, num, r4, rc), + + TP_STRUCT__entry( + __field(u64, unit_address) + __field(char *, fct) + __field(u64, list_address) + __field(u64, num) + __field(unsigned long, r4) + __field(long, rc) + ), + + TP_fast_assign( + __entry->unit_address = unit_address; + __entry->fct = fct; + __entry->list_address = list_address; + __entry->num = num; + __entry->r4 = r4; + __entry->rc = rc; + ), + + TP_printk("%#.16llx, %s(%#llx, %#llx), %#lx): %li", + __entry->unit_address, + __entry->fct, + __entry->list_address, + __entry->num, + __entry->r4, + __entry->rc + ) +); + #endif /* _CXL_TRACE_H */ /* This part must be outside protection */ diff --git a/drivers/misc/cxl/vphb.c b/drivers/misc/cxl/vphb.c index cbd4331..cdc7723 100644 --- a/drivers/misc/cxl/vphb.c +++ b/drivers/misc/cxl/vphb.c @@ -49,7 +49,7 @@ static bool cxl_pci_enable_device_hook(struct pci_dev *dev) phb = pci_bus_to_host(dev->bus); afu = (struct cxl_afu *)phb->private_data; - if (!cxl_adapter_link_ok(afu->adapter)) { + if (!cxl_ops->link_ok(afu->adapter, afu)) { dev_warn(&dev->dev, "%s: Device link is down, refusing to enable AFU\n", __func__); return false; } @@ -66,7 +66,7 @@ static bool cxl_pci_enable_device_hook(struct pci_dev *dev) return false; dev->dev.archdata.cxl_ctx = ctx; - return (cxl_afu_check_and_enable(afu) == 0); + return (cxl_ops->afu_check_and_enable(afu) == 0); } static void cxl_pci_disable_device(struct pci_dev *dev) @@ -99,113 +99,90 @@ static int cxl_pcie_cfg_record(u8 bus, u8 devfn) return (bus << 8) + devfn; } -static unsigned long cxl_pcie_cfg_addr(struct pci_controller* phb, - u8 bus, u8 devfn, int offset) -{ - int record = cxl_pcie_cfg_record(bus, devfn); - - return (unsigned long)phb->cfg_addr + ((unsigned long)phb->cfg_data * record) + offset; -} - - static int cxl_pcie_config_info(struct pci_bus *bus, unsigned int devfn, - int offset, int len, - volatile void __iomem **ioaddr, - u32 *mask, int *shift) + struct cxl_afu **_afu, int *_record) { struct pci_controller *phb; struct cxl_afu *afu; - unsigned long addr; + int record; phb = pci_bus_to_host(bus); if (phb == NULL) return PCIBIOS_DEVICE_NOT_FOUND; - afu = (struct cxl_afu *)phb->private_data; - if (cxl_pcie_cfg_record(bus->number, devfn) > afu->crs_num) + afu = (struct cxl_afu *)phb->private_data; + record = cxl_pcie_cfg_record(bus->number, devfn); + if (record > afu->crs_num) return PCIBIOS_DEVICE_NOT_FOUND; - if (offset >= (unsigned long)phb->cfg_data) - return PCIBIOS_BAD_REGISTER_NUMBER; - addr = cxl_pcie_cfg_addr(phb, bus->number, devfn, offset); - *ioaddr = (void *)(addr & ~0x3ULL); - *shift = ((addr & 0x3) * 8); - switch (len) { - case 1: - *mask = 0xff; - break; - case 2: - *mask = 0xffff; - break; - default: - *mask = 0xffffffff; - break; - } + *_afu = afu; + *_record = record; return 0; } - -static inline bool cxl_config_link_ok(struct pci_bus *bus) -{ - struct pci_controller *phb; - struct cxl_afu *afu; - - /* Config space IO is based on phb->cfg_addr, which is based on - * afu_desc_mmio. This isn't safe to read/write when the link - * goes down, as EEH tears down MMIO space. - * - * Check if the link is OK before proceeding. - */ - - phb = pci_bus_to_host(bus); - if (phb == NULL) - return false; - afu = (struct cxl_afu *)phb->private_data; - return cxl_adapter_link_ok(afu->adapter); -} - static int cxl_pcie_read_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 *val) { - volatile void __iomem *ioaddr; - int shift, rc; - u32 mask; + int rc, record; + struct cxl_afu *afu; + u8 val8; + u16 val16; + u32 val32; - rc = cxl_pcie_config_info(bus, devfn, offset, len, &ioaddr, - &mask, &shift); + rc = cxl_pcie_config_info(bus, devfn, &afu, &record); if (rc) return rc; - if (!cxl_config_link_ok(bus)) + switch (len) { + case 1: + rc = cxl_ops->afu_cr_read8(afu, record, offset, &val8); + *val = val8; + break; + case 2: + rc = cxl_ops->afu_cr_read16(afu, record, offset, &val16); + *val = val16; + break; + case 4: + rc = cxl_ops->afu_cr_read32(afu, record, offset, &val32); + *val = val32; + break; + default: + WARN_ON(1); + } + + if (rc) return PCIBIOS_DEVICE_NOT_FOUND; - /* Can only read 32 bits */ - *val = (in_le32(ioaddr) >> shift) & mask; return PCIBIOS_SUCCESSFUL; } static int cxl_pcie_write_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 val) { - volatile void __iomem *ioaddr; - u32 v, mask; - int shift, rc; + int rc, record; + struct cxl_afu *afu; - rc = cxl_pcie_config_info(bus, devfn, offset, len, &ioaddr, - &mask, &shift); + rc = cxl_pcie_config_info(bus, devfn, &afu, &record); if (rc) return rc; - if (!cxl_config_link_ok(bus)) - return PCIBIOS_DEVICE_NOT_FOUND; - - /* Can only write 32 bits so do read-modify-write */ - mask <<= shift; - val <<= shift; + switch (len) { + case 1: + rc = cxl_ops->afu_cr_write8(afu, record, offset, val & 0xff); + break; + case 2: + rc = cxl_ops->afu_cr_write16(afu, record, offset, val & 0xffff); + break; + case 4: + rc = cxl_ops->afu_cr_write32(afu, record, offset, val); + break; + default: + WARN_ON(1); + } - v = (in_le32(ioaddr) & ~mask) | (val & mask); + if (rc) + return PCIBIOS_SET_FAILED; - out_le32(ioaddr, v); return PCIBIOS_SUCCESSFUL; } @@ -233,23 +210,31 @@ int cxl_pci_vphb_add(struct cxl_afu *afu) { struct pci_dev *phys_dev; struct pci_controller *phb, *phys_phb; - - phys_dev = to_pci_dev(afu->adapter->dev.parent); - phys_phb = pci_bus_to_host(phys_dev->bus); + struct device_node *vphb_dn; + struct device *parent; + + if (cpu_has_feature(CPU_FTR_HVMODE)) { + phys_dev = to_pci_dev(afu->adapter->dev.parent); + phys_phb = pci_bus_to_host(phys_dev->bus); + vphb_dn = phys_phb->dn; + parent = &phys_dev->dev; + } else { + vphb_dn = afu->adapter->dev.parent->of_node; + parent = afu->adapter->dev.parent; + } /* Alloc and setup PHB data structure */ - phb = pcibios_alloc_controller(phys_phb->dn); - + phb = pcibios_alloc_controller(vphb_dn); if (!phb) return -ENODEV; /* Setup parent in sysfs */ - phb->parent = &phys_dev->dev; + phb->parent = parent; /* Setup the PHB using arch provided callback */ phb->ops = &cxl_pcie_pci_ops; - phb->cfg_addr = afu->afu_desc_mmio + afu->crs_offset; - phb->cfg_data = (void *)(u64)afu->crs_len; + phb->cfg_addr = NULL; + phb->cfg_data = 0; phb->private_data = afu; phb->controller_ops = cxl_pci_controller_ops; @@ -272,15 +257,6 @@ int cxl_pci_vphb_add(struct cxl_afu *afu) return 0; } -void cxl_pci_vphb_reconfigure(struct cxl_afu *afu) -{ - /* When we are reconfigured, the AFU's MMIO space is unmapped - * and remapped. We need to reflect this in the PHB's view of - * the world. - */ - afu->phb->cfg_addr = afu->afu_desc_mmio + afu->crs_offset; -} - void cxl_pci_vphb_remove(struct cxl_afu *afu) { struct pci_controller *phb; @@ -296,6 +272,15 @@ void cxl_pci_vphb_remove(struct cxl_afu *afu) pcibios_free_controller(phb); } +bool cxl_pci_is_vphb_device(struct pci_dev *dev) +{ + struct pci_controller *phb; + + phb = pci_bus_to_host(dev->bus); + + return (phb->ops == &cxl_pcie_pci_ops); +} + struct cxl_afu *cxl_pci_to_afu(struct pci_dev *dev) { struct pci_controller *phb; diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig index 04f2e1f..cfc493c 100644 --- a/drivers/misc/eeprom/Kconfig +++ b/drivers/misc/eeprom/Kconfig @@ -3,6 +3,8 @@ menu "EEPROM support" config EEPROM_AT24 tristate "I2C EEPROMs / RAMs / ROMs from most vendors" depends on I2C && SYSFS + select REGMAP + select NVMEM help Enable this driver to get read/write support to most I2C EEPROMs and compatible devices like FRAMs, SRAMs, ROMs etc. After you @@ -30,6 +32,8 @@ config EEPROM_AT24 config EEPROM_AT25 tristate "SPI EEPROMs from most vendors" depends on SPI && SYSFS + select REGMAP + select NVMEM help Enable this driver to get read/write support to most SPI EEPROMs, after you configure the board init code to know about each eeprom @@ -74,6 +78,8 @@ config EEPROM_93CX6 config EEPROM_93XX46 tristate "Microwire EEPROM 93XX46 support" depends on SPI && SYSFS + select REGMAP + select NVMEM help Driver for the microwire EEPROM chipsets 93xx46x. The driver supports both read and write commands and also the command to diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index 5d7c090..089d694 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -15,7 +15,6 @@ #include <linux/slab.h> #include <linux/delay.h> #include <linux/mutex.h> -#include <linux/sysfs.h> #include <linux/mod_devicetable.h> #include <linux/log2.h> #include <linux/bitops.h> @@ -23,6 +22,8 @@ #include <linux/of.h> #include <linux/acpi.h> #include <linux/i2c.h> +#include <linux/nvmem-provider.h> +#include <linux/regmap.h> #include <linux/platform_data/at24.h> /* @@ -55,7 +56,6 @@ struct at24_data { struct at24_platform_data chip; - struct memory_accessor macc; int use_smbus; int use_smbus_write; @@ -64,12 +64,15 @@ struct at24_data { * but not from changes by other I2C masters. */ struct mutex lock; - struct bin_attribute bin; u8 *writebuf; unsigned write_max; unsigned num_addresses; + struct regmap_config regmap_config; + struct nvmem_config nvmem_config; + struct nvmem_device *nvmem; + /* * Some chips tie up multiple I2C addresses; dummy devices reserve * them for us, and we'll use them with SMBus calls. @@ -283,17 +286,6 @@ static ssize_t at24_read(struct at24_data *at24, return retval; } -static ssize_t at24_bin_read(struct file *filp, struct kobject *kobj, - struct bin_attribute *attr, - char *buf, loff_t off, size_t count) -{ - struct at24_data *at24; - - at24 = dev_get_drvdata(container_of(kobj, struct device, kobj)); - return at24_read(at24, buf, off, count); -} - - /* * Note that if the hardware write-protect pin is pulled high, the whole * chip is normally write protected. But there are plenty of product @@ -414,40 +406,49 @@ static ssize_t at24_write(struct at24_data *at24, const char *buf, loff_t off, return retval; } -static ssize_t at24_bin_write(struct file *filp, struct kobject *kobj, - struct bin_attribute *attr, - char *buf, loff_t off, size_t count) -{ - struct at24_data *at24; - - at24 = dev_get_drvdata(container_of(kobj, struct device, kobj)); - return at24_write(at24, buf, off, count); -} - /*-------------------------------------------------------------------------*/ /* - * This lets other kernel code access the eeprom data. For example, it - * might hold a board's Ethernet address, or board-specific calibration - * data generated on the manufacturing floor. - */ - -static ssize_t at24_macc_read(struct memory_accessor *macc, char *buf, - off_t offset, size_t count) + * Provide a regmap interface, which is registered with the NVMEM + * framework +*/ +static int at24_regmap_read(void *context, const void *reg, size_t reg_size, + void *val, size_t val_size) { - struct at24_data *at24 = container_of(macc, struct at24_data, macc); + struct at24_data *at24 = context; + off_t offset = *(u32 *)reg; + int err; - return at24_read(at24, buf, offset, count); + err = at24_read(at24, val, offset, val_size); + if (err) + return err; + return 0; } -static ssize_t at24_macc_write(struct memory_accessor *macc, const char *buf, - off_t offset, size_t count) +static int at24_regmap_write(void *context, const void *data, size_t count) { - struct at24_data *at24 = container_of(macc, struct at24_data, macc); + struct at24_data *at24 = context; + const char *buf; + u32 offset; + size_t len; + int err; - return at24_write(at24, buf, offset, count); + memcpy(&offset, data, sizeof(offset)); + buf = (const char *)data + sizeof(offset); + len = count - sizeof(offset); + + err = at24_write(at24, buf, offset, len); + if (err) + return err; + return 0; } +static const struct regmap_bus at24_regmap_bus = { + .read = at24_regmap_read, + .write = at24_regmap_write, + .reg_format_endian_default = REGMAP_ENDIAN_NATIVE, +}; + /*-------------------------------------------------------------------------*/ #ifdef CONFIG_OF @@ -481,6 +482,7 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) struct at24_data *at24; int err; unsigned i, num_addresses; + struct regmap *regmap; if (client->dev.platform_data) { chip = *(struct at24_platform_data *)client->dev.platform_data; @@ -573,29 +575,12 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) at24->chip = chip; at24->num_addresses = num_addresses; - /* - * Export the EEPROM bytes through sysfs, since that's convenient. - * By default, only root should see the data (maybe passwords etc) - */ - sysfs_bin_attr_init(&at24->bin); - at24->bin.attr.name = "eeprom"; - at24->bin.attr.mode = chip.flags & AT24_FLAG_IRUGO ? S_IRUGO : S_IRUSR; - at24->bin.read = at24_bin_read; - at24->bin.size = chip.byte_len; - - at24->macc.read = at24_macc_read; - writable = !(chip.flags & AT24_FLAG_READONLY); if (writable) { if (!use_smbus || use_smbus_write) { unsigned write_max = chip.page_size; - at24->macc.write = at24_macc_write; - - at24->bin.write = at24_bin_write; - at24->bin.attr.mode |= S_IWUSR; - if (write_max > io_limit) write_max = io_limit; if (use_smbus && write_max > I2C_SMBUS_BLOCK_MAX) @@ -627,14 +612,38 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) } } - err = sysfs_create_bin_file(&client->dev.kobj, &at24->bin); - if (err) + at24->regmap_config.reg_bits = 32; + at24->regmap_config.val_bits = 8; + at24->regmap_config.reg_stride = 1; + at24->regmap_config.max_register = chip.byte_len - 1; + + regmap = devm_regmap_init(&client->dev, &at24_regmap_bus, at24, + &at24->regmap_config); + if (IS_ERR(regmap)) { + dev_err(&client->dev, "regmap init failed\n"); + err = PTR_ERR(regmap); + goto err_clients; + } + + at24->nvmem_config.name = dev_name(&client->dev); + at24->nvmem_config.dev = &client->dev; + at24->nvmem_config.read_only = !writable; + at24->nvmem_config.root_only = true; + at24->nvmem_config.owner = THIS_MODULE; + at24->nvmem_config.compat = true; + at24->nvmem_config.base_dev = &client->dev; + + at24->nvmem = nvmem_register(&at24->nvmem_config); + + if (IS_ERR(at24->nvmem)) { + err = PTR_ERR(at24->nvmem); goto err_clients; + } i2c_set_clientdata(client, at24); - dev_info(&client->dev, "%zu byte %s EEPROM, %s, %u bytes/write\n", - at24->bin.size, client->name, + dev_info(&client->dev, "%u byte %s EEPROM, %s, %u bytes/write\n", + chip.byte_len, client->name, writable ? "writable" : "read-only", at24->write_max); if (use_smbus == I2C_SMBUS_WORD_DATA || use_smbus == I2C_SMBUS_BYTE_DATA) { @@ -645,7 +654,7 @@ static int at24_probe(struct i2c_client *client, const struct i2c_device_id *id) /* export data to kernel code */ if (chip.setup) - chip.setup(&at24->macc, chip.context); + chip.setup(at24->nvmem, chip.context); return 0; @@ -663,7 +672,8 @@ static int at24_remove(struct i2c_client *client) int i; at24 = i2c_get_clientdata(client); - sysfs_remove_bin_file(&client->dev.kobj, &at24->bin); + + nvmem_unregister(at24->nvmem); for (i = 1; i < at24->num_addresses; i++) i2c_unregister_device(at24->client[i]); diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c index f850ef5..fa36a6e 100644 --- a/drivers/misc/eeprom/at25.c +++ b/drivers/misc/eeprom/at25.c @@ -16,6 +16,8 @@ #include <linux/device.h> #include <linux/sched.h> +#include <linux/nvmem-provider.h> +#include <linux/regmap.h> #include <linux/spi/spi.h> #include <linux/spi/eeprom.h> #include <linux/property.h> @@ -29,11 +31,12 @@ struct at25_data { struct spi_device *spi; - struct memory_accessor mem; struct mutex lock; struct spi_eeprom chip; - struct bin_attribute bin; unsigned addrlen; + struct regmap_config regmap_config; + struct nvmem_config nvmem_config; + struct nvmem_device *nvmem; }; #define AT25_WREN 0x06 /* latch the write enable */ @@ -77,10 +80,10 @@ at25_ee_read( struct spi_message m; u8 instr; - if (unlikely(offset >= at25->bin.size)) + if (unlikely(offset >= at25->chip.byte_len)) return 0; - if ((offset + count) > at25->bin.size) - count = at25->bin.size - offset; + if ((offset + count) > at25->chip.byte_len) + count = at25->chip.byte_len - offset; if (unlikely(!count)) return count; @@ -131,21 +134,19 @@ at25_ee_read( return status ? status : count; } -static ssize_t -at25_bin_read(struct file *filp, struct kobject *kobj, - struct bin_attribute *bin_attr, - char *buf, loff_t off, size_t count) +static int at25_regmap_read(void *context, const void *reg, size_t reg_size, + void *val, size_t val_size) { - struct device *dev; - struct at25_data *at25; + struct at25_data *at25 = context; + off_t offset = *(u32 *)reg; + int err; - dev = container_of(kobj, struct device, kobj); - at25 = dev_get_drvdata(dev); - - return at25_ee_read(at25, buf, off, count); + err = at25_ee_read(at25, val, offset, val_size); + if (err) + return err; + return 0; } - static ssize_t at25_ee_write(struct at25_data *at25, const char *buf, loff_t off, size_t count) @@ -155,10 +156,10 @@ at25_ee_write(struct at25_data *at25, const char *buf, loff_t off, unsigned buf_size; u8 *bounce; - if (unlikely(off >= at25->bin.size)) + if (unlikely(off >= at25->chip.byte_len)) return -EFBIG; - if ((off + count) > at25->bin.size) - count = at25->bin.size - off; + if ((off + count) > at25->chip.byte_len) + count = at25->chip.byte_len - off; if (unlikely(!count)) return count; @@ -265,39 +266,29 @@ at25_ee_write(struct at25_data *at25, const char *buf, loff_t off, return written ? written : status; } -static ssize_t -at25_bin_write(struct file *filp, struct kobject *kobj, - struct bin_attribute *bin_attr, - char *buf, loff_t off, size_t count) +static int at25_regmap_write(void *context, const void *data, size_t count) { - struct device *dev; - struct at25_data *at25; - - dev = container_of(kobj, struct device, kobj); - at25 = dev_get_drvdata(dev); - - return at25_ee_write(at25, buf, off, count); -} + struct at25_data *at25 = context; + const char *buf; + u32 offset; + size_t len; + int err; -/*-------------------------------------------------------------------------*/ - -/* Let in-kernel code access the eeprom data. */ - -static ssize_t at25_mem_read(struct memory_accessor *mem, char *buf, - off_t offset, size_t count) -{ - struct at25_data *at25 = container_of(mem, struct at25_data, mem); + memcpy(&offset, data, sizeof(offset)); + buf = (const char *)data + sizeof(offset); + len = count - sizeof(offset); - return at25_ee_read(at25, buf, offset, count); + err = at25_ee_write(at25, buf, offset, len); + if (err) + return err; + return 0; } -static ssize_t at25_mem_write(struct memory_accessor *mem, const char *buf, - off_t offset, size_t count) -{ - struct at25_data *at25 = container_of(mem, struct at25_data, mem); - - return at25_ee_write(at25, buf, offset, count); -} +static const struct regmap_bus at25_regmap_bus = { + .read = at25_regmap_read, + .write = at25_regmap_write, + .reg_format_endian_default = REGMAP_ENDIAN_NATIVE, +}; /*-------------------------------------------------------------------------*/ @@ -358,6 +349,7 @@ static int at25_probe(struct spi_device *spi) { struct at25_data *at25 = NULL; struct spi_eeprom chip; + struct regmap *regmap; int err; int sr; int addrlen; @@ -402,40 +394,35 @@ static int at25_probe(struct spi_device *spi) spi_set_drvdata(spi, at25); at25->addrlen = addrlen; - /* Export the EEPROM bytes through sysfs, since that's convenient. - * And maybe to other kernel code; it might hold a board's Ethernet - * address, or board-specific calibration data generated on the - * manufacturing floor. - * - * Default to root-only access to the data; EEPROMs often hold data - * that's sensitive for read and/or write, like ethernet addresses, - * security codes, board-specific manufacturing calibrations, etc. - */ - sysfs_bin_attr_init(&at25->bin); - at25->bin.attr.name = "eeprom"; - at25->bin.attr.mode = S_IRUSR; - at25->bin.read = at25_bin_read; - at25->mem.read = at25_mem_read; - - at25->bin.size = at25->chip.byte_len; - if (!(chip.flags & EE_READONLY)) { - at25->bin.write = at25_bin_write; - at25->bin.attr.mode |= S_IWUSR; - at25->mem.write = at25_mem_write; - } + at25->regmap_config.reg_bits = 32; + at25->regmap_config.val_bits = 8; + at25->regmap_config.reg_stride = 1; + at25->regmap_config.max_register = chip.byte_len - 1; - err = sysfs_create_bin_file(&spi->dev.kobj, &at25->bin); - if (err) - return err; - - if (chip.setup) - chip.setup(&at25->mem, chip.context); + regmap = devm_regmap_init(&spi->dev, &at25_regmap_bus, at25, + &at25->regmap_config); + if (IS_ERR(regmap)) { + dev_err(&spi->dev, "regmap init failed\n"); + return PTR_ERR(regmap); + } - dev_info(&spi->dev, "%Zd %s %s eeprom%s, pagesize %u\n", - (at25->bin.size < 1024) - ? at25->bin.size - : (at25->bin.size / 1024), - (at25->bin.size < 1024) ? "Byte" : "KByte", + at25->nvmem_config.name = dev_name(&spi->dev); + at25->nvmem_config.dev = &spi->dev; + at25->nvmem_config.read_only = chip.flags & EE_READONLY; + at25->nvmem_config.root_only = true; + at25->nvmem_config.owner = THIS_MODULE; + at25->nvmem_config.compat = true; + at25->nvmem_config.base_dev = &spi->dev; + + at25->nvmem = nvmem_register(&at25->nvmem_config); + if (IS_ERR(at25->nvmem)) + return PTR_ERR(at25->nvmem); + + dev_info(&spi->dev, "%d %s %s eeprom%s, pagesize %u\n", + (chip.byte_len < 1024) + ? chip.byte_len + : (chip.byte_len / 1024), + (chip.byte_len < 1024) ? "Byte" : "KByte", at25->chip.name, (chip.flags & EE_READONLY) ? " (readonly)" : "", at25->chip.page_size); @@ -447,7 +434,8 @@ static int at25_remove(struct spi_device *spi) struct at25_data *at25; at25 = spi_get_drvdata(spi); - sysfs_remove_bin_file(&spi->dev.kobj, &at25->bin); + nvmem_unregister(at25->nvmem); + return 0; } diff --git a/drivers/misc/eeprom/eeprom.c b/drivers/misc/eeprom/eeprom.c index 7342fd6..3d1d551 100644 --- a/drivers/misc/eeprom/eeprom.c +++ b/drivers/misc/eeprom/eeprom.c @@ -84,7 +84,7 @@ static ssize_t eeprom_read(struct file *filp, struct kobject *kobj, struct bin_attribute *bin_attr, char *buf, loff_t off, size_t count) { - struct i2c_client *client = to_i2c_client(container_of(kobj, struct device, kobj)); + struct i2c_client *client = to_i2c_client(kobj_to_dev(kobj)); struct eeprom_data *data = i2c_get_clientdata(client); u8 slice; diff --git a/drivers/misc/eeprom/eeprom_93xx46.c b/drivers/misc/eeprom/eeprom_93xx46.c index ff63f05..426fe2f 100644 --- a/drivers/misc/eeprom/eeprom_93xx46.c +++ b/drivers/misc/eeprom/eeprom_93xx46.c @@ -10,12 +10,17 @@ #include <linux/delay.h> #include <linux/device.h> +#include <linux/gpio/consumer.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/mutex.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/of_gpio.h> #include <linux/slab.h> #include <linux/spi/spi.h> -#include <linux/sysfs.h> +#include <linux/nvmem-provider.h> +#include <linux/regmap.h> #include <linux/eeprom_93xx46.h> #define OP_START 0x4 @@ -25,73 +30,111 @@ #define ADDR_ERAL 0x20 #define ADDR_EWEN 0x30 +struct eeprom_93xx46_devtype_data { + unsigned int quirks; +}; + +static const struct eeprom_93xx46_devtype_data atmel_at93c46d_data = { + .quirks = EEPROM_93XX46_QUIRK_SINGLE_WORD_READ | + EEPROM_93XX46_QUIRK_INSTRUCTION_LENGTH, +}; + struct eeprom_93xx46_dev { struct spi_device *spi; struct eeprom_93xx46_platform_data *pdata; - struct bin_attribute bin; struct mutex lock; + struct regmap_config regmap_config; + struct nvmem_config nvmem_config; + struct nvmem_device *nvmem; int addrlen; + int size; }; +static inline bool has_quirk_single_word_read(struct eeprom_93xx46_dev *edev) +{ + return edev->pdata->quirks & EEPROM_93XX46_QUIRK_SINGLE_WORD_READ; +} + +static inline bool has_quirk_instruction_length(struct eeprom_93xx46_dev *edev) +{ + return edev->pdata->quirks & EEPROM_93XX46_QUIRK_INSTRUCTION_LENGTH; +} + static ssize_t -eeprom_93xx46_bin_read(struct file *filp, struct kobject *kobj, - struct bin_attribute *bin_attr, - char *buf, loff_t off, size_t count) +eeprom_93xx46_read(struct eeprom_93xx46_dev *edev, char *buf, + unsigned off, size_t count) { - struct eeprom_93xx46_dev *edev; - struct device *dev; - struct spi_message m; - struct spi_transfer t[2]; - int bits, ret; - u16 cmd_addr; + ssize_t ret = 0; - dev = container_of(kobj, struct device, kobj); - edev = dev_get_drvdata(dev); + if (unlikely(off >= edev->size)) + return 0; + if ((off + count) > edev->size) + count = edev->size - off; + if (unlikely(!count)) + return count; - cmd_addr = OP_READ << edev->addrlen; + mutex_lock(&edev->lock); - if (edev->addrlen == 7) { - cmd_addr |= off & 0x7f; - bits = 10; - } else { - cmd_addr |= off & 0x3f; - bits = 9; - } + if (edev->pdata->prepare) + edev->pdata->prepare(edev); - dev_dbg(&edev->spi->dev, "read cmd 0x%x, %d Hz\n", - cmd_addr, edev->spi->max_speed_hz); + while (count) { + struct spi_message m; + struct spi_transfer t[2] = { { 0 } }; + u16 cmd_addr = OP_READ << edev->addrlen; + size_t nbytes = count; + int bits; + int err; + + if (edev->addrlen == 7) { + cmd_addr |= off & 0x7f; + bits = 10; + if (has_quirk_single_word_read(edev)) + nbytes = 1; + } else { + cmd_addr |= (off >> 1) & 0x3f; + bits = 9; + if (has_quirk_single_word_read(edev)) + nbytes = 2; + } - spi_message_init(&m); - memset(t, 0, sizeof(t)); + dev_dbg(&edev->spi->dev, "read cmd 0x%x, %d Hz\n", + cmd_addr, edev->spi->max_speed_hz); - t[0].tx_buf = (char *)&cmd_addr; - t[0].len = 2; - t[0].bits_per_word = bits; - spi_message_add_tail(&t[0], &m); + spi_message_init(&m); - t[1].rx_buf = buf; - t[1].len = count; - t[1].bits_per_word = 8; - spi_message_add_tail(&t[1], &m); + t[0].tx_buf = (char *)&cmd_addr; + t[0].len = 2; + t[0].bits_per_word = bits; + spi_message_add_tail(&t[0], &m); - mutex_lock(&edev->lock); + t[1].rx_buf = buf; + t[1].len = count; + t[1].bits_per_word = 8; + spi_message_add_tail(&t[1], &m); - if (edev->pdata->prepare) - edev->pdata->prepare(edev); + err = spi_sync(edev->spi, &m); + /* have to wait at least Tcsl ns */ + ndelay(250); - ret = spi_sync(edev->spi, &m); - /* have to wait at least Tcsl ns */ - ndelay(250); - if (ret) { - dev_err(&edev->spi->dev, "read %zu bytes at %d: err. %d\n", - count, (int)off, ret); + if (err) { + dev_err(&edev->spi->dev, "read %zu bytes at %d: err. %d\n", + nbytes, (int)off, err); + ret = err; + break; + } + + buf += nbytes; + off += nbytes; + count -= nbytes; + ret += nbytes; } if (edev->pdata->finish) edev->pdata->finish(edev); mutex_unlock(&edev->lock); - return ret ? : count; + return ret; } static int eeprom_93xx46_ew(struct eeprom_93xx46_dev *edev, int is_on) @@ -110,7 +153,13 @@ static int eeprom_93xx46_ew(struct eeprom_93xx46_dev *edev, int is_on) bits = 9; } - dev_dbg(&edev->spi->dev, "ew cmd 0x%04x\n", cmd_addr); + if (has_quirk_instruction_length(edev)) { + cmd_addr <<= 2; + bits += 2; + } + + dev_dbg(&edev->spi->dev, "ew%s cmd 0x%04x, %d bits\n", + is_on ? "en" : "ds", cmd_addr, bits); spi_message_init(&m); memset(&t, 0, sizeof(t)); @@ -155,7 +204,7 @@ eeprom_93xx46_write_word(struct eeprom_93xx46_dev *edev, bits = 10; data_len = 1; } else { - cmd_addr |= off & 0x3f; + cmd_addr |= (off >> 1) & 0x3f; bits = 9; data_len = 2; } @@ -182,16 +231,17 @@ eeprom_93xx46_write_word(struct eeprom_93xx46_dev *edev, } static ssize_t -eeprom_93xx46_bin_write(struct file *filp, struct kobject *kobj, - struct bin_attribute *bin_attr, - char *buf, loff_t off, size_t count) +eeprom_93xx46_write(struct eeprom_93xx46_dev *edev, const char *buf, + loff_t off, size_t count) { - struct eeprom_93xx46_dev *edev; - struct device *dev; int i, ret, step = 1; - dev = container_of(kobj, struct device, kobj); - edev = dev_get_drvdata(dev); + if (unlikely(off >= edev->size)) + return -EFBIG; + if ((off + count) > edev->size) + count = edev->size - off; + if (unlikely(!count)) + return count; /* only write even number of bytes on 16-bit devices */ if (edev->addrlen == 6) { @@ -228,6 +278,49 @@ eeprom_93xx46_bin_write(struct file *filp, struct kobject *kobj, return ret ? : count; } +/* + * Provide a regmap interface, which is registered with the NVMEM + * framework +*/ +static int eeprom_93xx46_regmap_read(void *context, const void *reg, + size_t reg_size, void *val, + size_t val_size) +{ + struct eeprom_93xx46_dev *eeprom_93xx46 = context; + off_t offset = *(u32 *)reg; + int err; + + err = eeprom_93xx46_read(eeprom_93xx46, val, offset, val_size); + if (err) + return err; + return 0; +} + +static int eeprom_93xx46_regmap_write(void *context, const void *data, + size_t count) +{ + struct eeprom_93xx46_dev *eeprom_93xx46 = context; + const char *buf; + u32 offset; + size_t len; + int err; + + memcpy(&offset, data, sizeof(offset)); + buf = (const char *)data + sizeof(offset); + len = count - sizeof(offset); + + err = eeprom_93xx46_write(eeprom_93xx46, buf, offset, len); + if (err) + return err; + return 0; +} + +static const struct regmap_bus eeprom_93xx46_regmap_bus = { + .read = eeprom_93xx46_regmap_read, + .write = eeprom_93xx46_regmap_write, + .reg_format_endian_default = REGMAP_ENDIAN_NATIVE, +}; + static int eeprom_93xx46_eral(struct eeprom_93xx46_dev *edev) { struct eeprom_93xx46_platform_data *pd = edev->pdata; @@ -245,6 +338,13 @@ static int eeprom_93xx46_eral(struct eeprom_93xx46_dev *edev) bits = 9; } + if (has_quirk_instruction_length(edev)) { + cmd_addr <<= 2; + bits += 2; + } + + dev_dbg(&edev->spi->dev, "eral cmd 0x%04x, %d bits\n", cmd_addr, bits); + spi_message_init(&m); memset(&t, 0, sizeof(t)); @@ -294,12 +394,101 @@ static ssize_t eeprom_93xx46_store_erase(struct device *dev, } static DEVICE_ATTR(erase, S_IWUSR, NULL, eeprom_93xx46_store_erase); +static void select_assert(void *context) +{ + struct eeprom_93xx46_dev *edev = context; + + gpiod_set_value_cansleep(edev->pdata->select, 1); +} + +static void select_deassert(void *context) +{ + struct eeprom_93xx46_dev *edev = context; + + gpiod_set_value_cansleep(edev->pdata->select, 0); +} + +static const struct of_device_id eeprom_93xx46_of_table[] = { + { .compatible = "eeprom-93xx46", }, + { .compatible = "atmel,at93c46d", .data = &atmel_at93c46d_data, }, + {} +}; +MODULE_DEVICE_TABLE(of, eeprom_93xx46_of_table); + +static int eeprom_93xx46_probe_dt(struct spi_device *spi) +{ + const struct of_device_id *of_id = + of_match_device(eeprom_93xx46_of_table, &spi->dev); + struct device_node *np = spi->dev.of_node; + struct eeprom_93xx46_platform_data *pd; + u32 tmp; + int gpio; + enum of_gpio_flags of_flags; + int ret; + + pd = devm_kzalloc(&spi->dev, sizeof(*pd), GFP_KERNEL); + if (!pd) + return -ENOMEM; + + ret = of_property_read_u32(np, "data-size", &tmp); + if (ret < 0) { + dev_err(&spi->dev, "data-size property not found\n"); + return ret; + } + + if (tmp == 8) { + pd->flags |= EE_ADDR8; + } else if (tmp == 16) { + pd->flags |= EE_ADDR16; + } else { + dev_err(&spi->dev, "invalid data-size (%d)\n", tmp); + return -EINVAL; + } + + if (of_property_read_bool(np, "read-only")) + pd->flags |= EE_READONLY; + + gpio = of_get_named_gpio_flags(np, "select-gpios", 0, &of_flags); + if (gpio_is_valid(gpio)) { + unsigned long flags = + of_flags == OF_GPIO_ACTIVE_LOW ? GPIOF_ACTIVE_LOW : 0; + + ret = devm_gpio_request_one(&spi->dev, gpio, flags, + "eeprom_93xx46_select"); + if (ret) + return ret; + + pd->select = gpio_to_desc(gpio); + pd->prepare = select_assert; + pd->finish = select_deassert; + + gpiod_direction_output(pd->select, 0); + } + + if (of_id->data) { + const struct eeprom_93xx46_devtype_data *data = of_id->data; + + pd->quirks = data->quirks; + } + + spi->dev.platform_data = pd; + + return 0; +} + static int eeprom_93xx46_probe(struct spi_device *spi) { struct eeprom_93xx46_platform_data *pd; struct eeprom_93xx46_dev *edev; + struct regmap *regmap; int err; + if (spi->dev.of_node) { + err = eeprom_93xx46_probe_dt(spi); + if (err < 0) + return err; + } + pd = spi->dev.platform_data; if (!pd) { dev_err(&spi->dev, "missing platform data\n"); @@ -325,19 +514,34 @@ static int eeprom_93xx46_probe(struct spi_device *spi) edev->spi = spi_dev_get(spi); edev->pdata = pd; - sysfs_bin_attr_init(&edev->bin); - edev->bin.attr.name = "eeprom"; - edev->bin.attr.mode = S_IRUSR; - edev->bin.read = eeprom_93xx46_bin_read; - edev->bin.size = 128; - if (!(pd->flags & EE_READONLY)) { - edev->bin.write = eeprom_93xx46_bin_write; - edev->bin.attr.mode |= S_IWUSR; + edev->size = 128; + + edev->regmap_config.reg_bits = 32; + edev->regmap_config.val_bits = 8; + edev->regmap_config.reg_stride = 1; + edev->regmap_config.max_register = edev->size - 1; + + regmap = devm_regmap_init(&spi->dev, &eeprom_93xx46_regmap_bus, edev, + &edev->regmap_config); + if (IS_ERR(regmap)) { + dev_err(&spi->dev, "regmap init failed\n"); + err = PTR_ERR(regmap); + goto fail; } - err = sysfs_create_bin_file(&spi->dev.kobj, &edev->bin); - if (err) + edev->nvmem_config.name = dev_name(&spi->dev); + edev->nvmem_config.dev = &spi->dev; + edev->nvmem_config.read_only = pd->flags & EE_READONLY; + edev->nvmem_config.root_only = true; + edev->nvmem_config.owner = THIS_MODULE; + edev->nvmem_config.compat = true; + edev->nvmem_config.base_dev = &spi->dev; + + edev->nvmem = nvmem_register(&edev->nvmem_config); + if (IS_ERR(edev->nvmem)) { + err = PTR_ERR(edev->nvmem); goto fail; + } dev_info(&spi->dev, "%d-bit eeprom %s\n", (pd->flags & EE_ADDR8) ? 8 : 16, @@ -359,10 +563,11 @@ static int eeprom_93xx46_remove(struct spi_device *spi) { struct eeprom_93xx46_dev *edev = spi_get_drvdata(spi); + nvmem_unregister(edev->nvmem); + if (!(edev->pdata->flags & EE_READONLY)) device_remove_file(&spi->dev, &dev_attr_erase); - sysfs_remove_bin_file(&spi->dev.kobj, &edev->bin); kfree(edev); return 0; } @@ -370,6 +575,7 @@ static int eeprom_93xx46_remove(struct spi_device *spi) static struct spi_driver eeprom_93xx46_driver = { .driver = { .name = "93xx46", + .of_match_table = of_match_ptr(eeprom_93xx46_of_table), }, .probe = eeprom_93xx46_probe, .remove = eeprom_93xx46_remove, diff --git a/drivers/misc/genwqe/card_sysfs.c b/drivers/misc/genwqe/card_sysfs.c index 6ab31ef..c24c9b7 100644 --- a/drivers/misc/genwqe/card_sysfs.c +++ b/drivers/misc/genwqe/card_sysfs.c @@ -278,7 +278,7 @@ static umode_t genwqe_is_visible(struct kobject *kobj, struct attribute *attr, int n) { unsigned int j; - struct device *dev = container_of(kobj, struct device, kobj); + struct device *dev = kobj_to_dev(kobj); struct genwqe_dev *cd = dev_get_drvdata(dev); umode_t mode = attr->mode; diff --git a/drivers/misc/ibmasm/ibmasm.h b/drivers/misc/ibmasm/ibmasm.h index 5bd1277..9fea49d 100644 --- a/drivers/misc/ibmasm/ibmasm.h +++ b/drivers/misc/ibmasm/ibmasm.h @@ -34,6 +34,7 @@ #include <linux/kref.h> #include <linux/device.h> #include <linux/input.h> +#include <linux/time64.h> /* Driver identification */ #define DRIVER_NAME "ibmasm" @@ -53,9 +54,11 @@ extern int ibmasm_debug; static inline char *get_timestamp(char *buf) { - struct timeval now; - do_gettimeofday(&now); - sprintf(buf, "%lu.%lu", now.tv_sec, now.tv_usec); + struct timespec64 now; + + ktime_get_real_ts64(&now); + sprintf(buf, "%llu.%.08lu", (long long)now.tv_sec, + now.tv_nsec / NSEC_PER_USEC); return buf; } diff --git a/drivers/misc/lis3lv02d/lis3lv02d_i2c.c b/drivers/misc/lis3lv02d/lis3lv02d_i2c.c index 0c3bb7e..14b7d53 100644 --- a/drivers/misc/lis3lv02d/lis3lv02d_i2c.c +++ b/drivers/misc/lis3lv02d/lis3lv02d_i2c.c @@ -209,7 +209,7 @@ static int lis3lv02d_i2c_remove(struct i2c_client *client) #ifdef CONFIG_PM_SLEEP static int lis3lv02d_i2c_suspend(struct device *dev) { - struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct i2c_client *client = to_i2c_client(dev); struct lis3lv02d *lis3 = i2c_get_clientdata(client); if (!lis3->pdata || !lis3->pdata->wakeup_flags) @@ -219,7 +219,7 @@ static int lis3lv02d_i2c_suspend(struct device *dev) static int lis3lv02d_i2c_resume(struct device *dev) { - struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct i2c_client *client = to_i2c_client(dev); struct lis3lv02d *lis3 = i2c_get_clientdata(client); /* @@ -238,7 +238,7 @@ static int lis3lv02d_i2c_resume(struct device *dev) #ifdef CONFIG_PM static int lis3_i2c_runtime_suspend(struct device *dev) { - struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct i2c_client *client = to_i2c_client(dev); struct lis3lv02d *lis3 = i2c_get_clientdata(client); lis3lv02d_poweroff(lis3); @@ -247,7 +247,7 @@ static int lis3_i2c_runtime_suspend(struct device *dev) static int lis3_i2c_runtime_resume(struct device *dev) { - struct i2c_client *client = container_of(dev, struct i2c_client, dev); + struct i2c_client *client = to_i2c_client(dev); struct lis3lv02d *lis3 = i2c_get_clientdata(client); lis3lv02d_poweron(lis3); diff --git a/drivers/misc/lkdtm.c b/drivers/misc/lkdtm.c index 11fdadc..5f1a36b 100644 --- a/drivers/misc/lkdtm.c +++ b/drivers/misc/lkdtm.c @@ -92,6 +92,9 @@ enum ctype { CT_UNALIGNED_LOAD_STORE_WRITE, CT_OVERWRITE_ALLOCATION, CT_WRITE_AFTER_FREE, + CT_READ_AFTER_FREE, + CT_WRITE_BUDDY_AFTER_FREE, + CT_READ_BUDDY_AFTER_FREE, CT_SOFTLOCKUP, CT_HARDLOCKUP, CT_SPINLOCKUP, @@ -103,7 +106,9 @@ enum ctype { CT_EXEC_USERSPACE, CT_ACCESS_USERSPACE, CT_WRITE_RO, + CT_WRITE_RO_AFTER_INIT, CT_WRITE_KERN, + CT_WRAP_ATOMIC }; static char* cp_name[] = { @@ -129,6 +134,9 @@ static char* cp_type[] = { "UNALIGNED_LOAD_STORE_WRITE", "OVERWRITE_ALLOCATION", "WRITE_AFTER_FREE", + "READ_AFTER_FREE", + "WRITE_BUDDY_AFTER_FREE", + "READ_BUDDY_AFTER_FREE", "SOFTLOCKUP", "HARDLOCKUP", "SPINLOCKUP", @@ -140,7 +148,9 @@ static char* cp_type[] = { "EXEC_USERSPACE", "ACCESS_USERSPACE", "WRITE_RO", + "WRITE_RO_AFTER_INIT", "WRITE_KERN", + "WRAP_ATOMIC" }; static struct jprobe lkdtm; @@ -162,6 +172,7 @@ static DEFINE_SPINLOCK(lock_me_up); static u8 data_area[EXEC_SIZE]; static const unsigned long rodata = 0xAA55AA55; +static unsigned long ro_after_init __ro_after_init = 0x55AA5500; module_param(recur_count, int, 0644); MODULE_PARM_DESC(recur_count, " Recursion level for the stack overflow test"); @@ -335,7 +346,7 @@ static noinline void corrupt_stack(void) memset((void *)data, 0, 64); } -static void execute_location(void *dst) +static void noinline execute_location(void *dst) { void (*func)(void) = dst; @@ -409,12 +420,109 @@ static void lkdtm_do_action(enum ctype which) break; } case CT_WRITE_AFTER_FREE: { + int *base, *again; size_t len = 1024; - u32 *data = kmalloc(len, GFP_KERNEL); + /* + * The slub allocator uses the first word to store the free + * pointer in some configurations. Use the middle of the + * allocation to avoid running into the freelist + */ + size_t offset = (len / sizeof(*base)) / 2; + + base = kmalloc(len, GFP_KERNEL); + pr_info("Allocated memory %p-%p\n", base, &base[offset * 2]); + pr_info("Attempting bad write to freed memory at %p\n", + &base[offset]); + kfree(base); + base[offset] = 0x0abcdef0; + /* Attempt to notice the overwrite. */ + again = kmalloc(len, GFP_KERNEL); + kfree(again); + if (again != base) + pr_info("Hmm, didn't get the same memory range.\n"); - kfree(data); + break; + } + case CT_READ_AFTER_FREE: { + int *base, *val, saw; + size_t len = 1024; + /* + * The slub allocator uses the first word to store the free + * pointer in some configurations. Use the middle of the + * allocation to avoid running into the freelist + */ + size_t offset = (len / sizeof(*base)) / 2; + + base = kmalloc(len, GFP_KERNEL); + if (!base) + break; + + val = kmalloc(len, GFP_KERNEL); + if (!val) + break; + + *val = 0x12345678; + base[offset] = *val; + pr_info("Value in memory before free: %x\n", base[offset]); + + kfree(base); + + pr_info("Attempting bad read from freed memory\n"); + saw = base[offset]; + if (saw != *val) { + /* Good! Poisoning happened, so declare a win. */ + pr_info("Memory correctly poisoned (%x)\n", saw); + BUG(); + } + pr_info("Memory was not poisoned\n"); + + kfree(val); + break; + } + case CT_WRITE_BUDDY_AFTER_FREE: { + unsigned long p = __get_free_page(GFP_KERNEL); + if (!p) + break; + pr_info("Writing to the buddy page before free\n"); + memset((void *)p, 0x3, PAGE_SIZE); + free_page(p); schedule(); - memset(data, 0x78, len); + pr_info("Attempting bad write to the buddy page after free\n"); + memset((void *)p, 0x78, PAGE_SIZE); + /* Attempt to notice the overwrite. */ + p = __get_free_page(GFP_KERNEL); + free_page(p); + schedule(); + + break; + } + case CT_READ_BUDDY_AFTER_FREE: { + unsigned long p = __get_free_page(GFP_KERNEL); + int saw, *val = kmalloc(1024, GFP_KERNEL); + int *base; + + if (!p) + break; + + if (!val) + break; + + base = (int *)p; + + *val = 0x12345678; + base[0] = *val; + pr_info("Value in memory before free: %x\n", base[0]); + free_page(p); + pr_info("Attempting to read from freed memory\n"); + saw = base[0]; + if (saw != *val) { + /* Good! Poisoning happened, so declare a win. */ + pr_info("Memory correctly poisoned (%x)\n", saw); + BUG(); + } + pr_info("Buddy page was not poisoned\n"); + + kfree(val); break; } case CT_SOFTLOCKUP: @@ -503,11 +611,28 @@ static void lkdtm_do_action(enum ctype which) break; } case CT_WRITE_RO: { - unsigned long *ptr; + /* Explicitly cast away "const" for the test. */ + unsigned long *ptr = (unsigned long *)&rodata; - ptr = (unsigned long *)&rodata; + pr_info("attempting bad rodata write at %p\n", ptr); + *ptr ^= 0xabcd1234; - pr_info("attempting bad write at %p\n", ptr); + break; + } + case CT_WRITE_RO_AFTER_INIT: { + unsigned long *ptr = &ro_after_init; + + /* + * Verify we were written to during init. Since an Oops + * is considered a "success", a failure is to just skip the + * real test. + */ + if ((*ptr & 0xAA) != 0xAA) { + pr_info("%p was NOT written during init!?\n", ptr); + break; + } + + pr_info("attempting bad ro_after_init write at %p\n", ptr); *ptr ^= 0xabcd1234; break; @@ -528,6 +653,17 @@ static void lkdtm_do_action(enum ctype which) do_overwritten(); break; } + case CT_WRAP_ATOMIC: { + atomic_t under = ATOMIC_INIT(INT_MIN); + atomic_t over = ATOMIC_INIT(INT_MAX); + + pr_info("attempting atomic underflow\n"); + atomic_dec(&under); + pr_info("attempting atomic overflow\n"); + atomic_inc(&over); + + return; + } case CT_NONE: default: break; @@ -817,6 +953,9 @@ static int __init lkdtm_module_init(void) int n_debugfs_entries = 1; /* Assume only the direct entry */ int i; + /* Make sure we can write to __ro_after_init values during __init */ + ro_after_init |= 0xAA; + /* Register debugfs interface */ lkdtm_debugfs_root = debugfs_create_dir("provoke-crash", NULL); if (!lkdtm_debugfs_root) { diff --git a/drivers/misc/mei/Kconfig b/drivers/misc/mei/Kconfig index d23384d..c49e1d2 100644 --- a/drivers/misc/mei/Kconfig +++ b/drivers/misc/mei/Kconfig @@ -1,6 +1,6 @@ config INTEL_MEI tristate "Intel Management Engine Interface" - depends on X86 && PCI && WATCHDOG_CORE + depends on X86 && PCI help The Intel Management Engine (Intel ME) provides Manageability, Security and Media services for system containing Intel chipsets. @@ -12,7 +12,7 @@ config INTEL_MEI config INTEL_MEI_ME tristate "ME Enabled Intel Chipsets" select INTEL_MEI - depends on X86 && PCI && WATCHDOG_CORE + depends on X86 && PCI help MEI support for ME Enabled Intel chipsets. @@ -37,7 +37,7 @@ config INTEL_MEI_ME config INTEL_MEI_TXE tristate "Intel Trusted Execution Environment with ME Interface" select INTEL_MEI - depends on X86 && PCI && WATCHDOG_CORE + depends on X86 && PCI help MEI Support for Trusted Execution Environment device on Intel SoCs diff --git a/drivers/misc/mei/Makefile b/drivers/misc/mei/Makefile index 01447ca..59e6b0a 100644 --- a/drivers/misc/mei/Makefile +++ b/drivers/misc/mei/Makefile @@ -9,7 +9,6 @@ mei-objs += interrupt.o mei-objs += client.o mei-objs += main.o mei-objs += amthif.o -mei-objs += wd.o mei-objs += bus.o mei-objs += bus-fixup.o mei-$(CONFIG_DEBUG_FS) += debugfs.o diff --git a/drivers/misc/mei/amthif.c b/drivers/misc/mei/amthif.c index cd0403f..194360a 100644 --- a/drivers/misc/mei/amthif.c +++ b/drivers/misc/mei/amthif.c @@ -50,7 +50,6 @@ void mei_amthif_reset_params(struct mei_device *dev) dev->iamthif_current_cb = NULL; dev->iamthif_canceled = false; dev->iamthif_state = MEI_IAMTHIF_IDLE; - dev->iamthif_timer = 0; dev->iamthif_stall_timer = 0; dev->iamthif_open_count = 0; } @@ -68,11 +67,14 @@ int mei_amthif_host_init(struct mei_device *dev, struct mei_me_client *me_cl) struct mei_cl *cl = &dev->iamthif_cl; int ret; + if (mei_cl_is_connected(cl)) + return 0; + dev->iamthif_state = MEI_IAMTHIF_IDLE; mei_cl_init(cl, dev); - ret = mei_cl_link(cl, MEI_IAMTHIF_HOST_CLIENT_ID); + ret = mei_cl_link(cl); if (ret < 0) { dev_err(dev->dev, "amthif: failed cl_link %d\n", ret); return ret; @@ -80,32 +82,10 @@ int mei_amthif_host_init(struct mei_device *dev, struct mei_me_client *me_cl) ret = mei_cl_connect(cl, me_cl, NULL); - dev->iamthif_state = MEI_IAMTHIF_IDLE; - return ret; } /** - * mei_amthif_find_read_list_entry - finds a amthilist entry for current file - * - * @dev: the device structure - * @file: pointer to file object - * - * Return: returned a list entry on success, NULL on failure. - */ -struct mei_cl_cb *mei_amthif_find_read_list_entry(struct mei_device *dev, - struct file *file) -{ - struct mei_cl_cb *cb; - - list_for_each_entry(cb, &dev->amthif_rd_complete_list.list, list) - if (cb->file_object == file) - return cb; - return NULL; -} - - -/** * mei_amthif_read - read data from AMTHIF client * * @dev: the device structure @@ -126,18 +106,11 @@ int mei_amthif_read(struct mei_device *dev, struct file *file, { struct mei_cl *cl = file->private_data; struct mei_cl_cb *cb; - unsigned long timeout; int rets; int wait_ret; - /* Only possible if we are in timeout */ - if (!cl) { - dev_err(dev->dev, "bad file ext.\n"); - return -ETIME; - } - dev_dbg(dev->dev, "checking amthif data\n"); - cb = mei_amthif_find_read_list_entry(dev, file); + cb = mei_cl_read_cb(cl, file); /* Check for if we can block or not*/ if (cb == NULL && file->f_flags & O_NONBLOCK) @@ -149,8 +122,9 @@ int mei_amthif_read(struct mei_device *dev, struct file *file, /* unlock the Mutex */ mutex_unlock(&dev->device_lock); - wait_ret = wait_event_interruptible(dev->iamthif_cl.wait, - (cb = mei_amthif_find_read_list_entry(dev, file))); + wait_ret = wait_event_interruptible(cl->rx_wait, + !list_empty(&cl->rd_completed) || + !mei_cl_is_connected(cl)); /* Locking again the Mutex */ mutex_lock(&dev->device_lock); @@ -158,7 +132,12 @@ int mei_amthif_read(struct mei_device *dev, struct file *file, if (wait_ret) return -ERESTARTSYS; - dev_dbg(dev->dev, "woke up from sleep\n"); + if (!mei_cl_is_connected(cl)) { + rets = -EBUSY; + goto out; + } + + cb = mei_cl_read_cb(cl, file); } if (cb->status) { @@ -168,24 +147,10 @@ int mei_amthif_read(struct mei_device *dev, struct file *file, } dev_dbg(dev->dev, "Got amthif data\n"); - dev->iamthif_timer = 0; - - timeout = cb->read_time + - mei_secs_to_jiffies(MEI_IAMTHIF_READ_TIMER); - dev_dbg(dev->dev, "amthif timeout = %lud\n", - timeout); - - if (time_after(jiffies, timeout)) { - dev_dbg(dev->dev, "amthif Time out\n"); - /* 15 sec for the message has expired */ - list_del_init(&cb->list); - rets = -ETIME; - goto free; - } /* if the whole message will fit remove it from the list */ if (cb->buf_idx >= *offset && length >= (cb->buf_idx - *offset)) list_del_init(&cb->list); - else if (cb->buf_idx > 0 && cb->buf_idx <= *offset) { + else if (cb->buf_idx <= *offset) { /* end of the message has been reached */ list_del_init(&cb->list); rets = 0; @@ -195,9 +160,8 @@ int mei_amthif_read(struct mei_device *dev, struct file *file, * remove message from deletion list */ - dev_dbg(dev->dev, "amthif cb->buf size - %d\n", - cb->buf.size); - dev_dbg(dev->dev, "amthif cb->buf_idx - %lu\n", cb->buf_idx); + dev_dbg(dev->dev, "amthif cb->buf.size - %zu cb->buf_idx - %zu\n", + cb->buf.size, cb->buf_idx); /* length is being truncated to PAGE_SIZE, however, * the buf_idx may point beyond */ @@ -229,7 +193,7 @@ out: * * Return: 0 on success, <0 on failure. */ -static int mei_amthif_read_start(struct mei_cl *cl, struct file *file) +static int mei_amthif_read_start(struct mei_cl *cl, const struct file *file) { struct mei_device *dev = cl->dev; struct mei_cl_cb *cb; @@ -248,7 +212,7 @@ static int mei_amthif_read_start(struct mei_cl *cl, struct file *file) list_add_tail(&cb->list, &dev->ctrl_wr_list.list); dev->iamthif_state = MEI_IAMTHIF_READING; - dev->iamthif_file_object = cb->file_object; + dev->iamthif_fp = cb->fp; dev->iamthif_current_cb = cb; return 0; @@ -277,7 +241,7 @@ static int mei_amthif_send_cmd(struct mei_cl *cl, struct mei_cl_cb *cb) dev->iamthif_state = MEI_IAMTHIF_WRITING; dev->iamthif_current_cb = cb; - dev->iamthif_file_object = cb->file_object; + dev->iamthif_fp = cb->fp; dev->iamthif_canceled = false; ret = mei_cl_write(cl, cb, false); @@ -285,7 +249,7 @@ static int mei_amthif_send_cmd(struct mei_cl *cl, struct mei_cl_cb *cb) return ret; if (cb->completed) - cb->status = mei_amthif_read_start(cl, cb->file_object); + cb->status = mei_amthif_read_start(cl, cb->fp); return 0; } @@ -304,8 +268,7 @@ int mei_amthif_run_next_cmd(struct mei_device *dev) dev->iamthif_canceled = false; dev->iamthif_state = MEI_IAMTHIF_IDLE; - dev->iamthif_timer = 0; - dev->iamthif_file_object = NULL; + dev->iamthif_fp = NULL; dev_dbg(dev->dev, "complete amthif cmd_list cb.\n"); @@ -329,17 +292,17 @@ int mei_amthif_run_next_cmd(struct mei_device *dev) int mei_amthif_write(struct mei_cl *cl, struct mei_cl_cb *cb) { - struct mei_device *dev; - - if (WARN_ON(!cl || !cl->dev)) - return -ENODEV; + struct mei_device *dev = cl->dev; - if (WARN_ON(!cb)) - return -EINVAL; + list_add_tail(&cb->list, &dev->amthif_cmd_list.list); - dev = cl->dev; + /* + * The previous request is still in processing, queue this one. + */ + if (dev->iamthif_state > MEI_IAMTHIF_IDLE && + dev->iamthif_state < MEI_IAMTHIF_READ_COMPLETE) + return 0; - list_add_tail(&cb->list, &dev->amthif_cmd_list.list); return mei_amthif_run_next_cmd(dev); } @@ -360,10 +323,10 @@ unsigned int mei_amthif_poll(struct mei_device *dev, { unsigned int mask = 0; - poll_wait(file, &dev->iamthif_cl.wait, wait); + poll_wait(file, &dev->iamthif_cl.rx_wait, wait); if (dev->iamthif_state == MEI_IAMTHIF_READ_COMPLETE && - dev->iamthif_file_object == file) { + dev->iamthif_fp == file) { mask |= POLLIN | POLLRDNORM; mei_amthif_run_next_cmd(dev); @@ -393,7 +356,7 @@ int mei_amthif_irq_write(struct mei_cl *cl, struct mei_cl_cb *cb, return ret; if (cb->completed) - cb->status = mei_amthif_read_start(cl, cb->file_object); + cb->status = mei_amthif_read_start(cl, cb->fp); return 0; } @@ -437,11 +400,12 @@ int mei_amthif_irq_read_msg(struct mei_cl *cl, /** * mei_amthif_complete - complete amthif callback. * - * @dev: the device structure. + * @cl: host client * @cb: callback block. */ -void mei_amthif_complete(struct mei_device *dev, struct mei_cl_cb *cb) +void mei_amthif_complete(struct mei_cl *cl, struct mei_cl_cb *cb) { + struct mei_device *dev = cl->dev; if (cb->fop_type == MEI_FOP_WRITE) { if (!cb->status) { @@ -453,25 +417,22 @@ void mei_amthif_complete(struct mei_device *dev, struct mei_cl_cb *cb) * in case of error enqueue the write cb to complete read list * so it can be propagated to the reader */ - list_add_tail(&cb->list, &dev->amthif_rd_complete_list.list); - wake_up_interruptible(&dev->iamthif_cl.wait); + list_add_tail(&cb->list, &cl->rd_completed); + wake_up_interruptible(&cl->rx_wait); return; } if (!dev->iamthif_canceled) { dev->iamthif_state = MEI_IAMTHIF_READ_COMPLETE; dev->iamthif_stall_timer = 0; - list_add_tail(&cb->list, &dev->amthif_rd_complete_list.list); + list_add_tail(&cb->list, &cl->rd_completed); dev_dbg(dev->dev, "amthif read completed\n"); - dev->iamthif_timer = jiffies; - dev_dbg(dev->dev, "dev->iamthif_timer = %ld\n", - dev->iamthif_timer); } else { mei_amthif_run_next_cmd(dev); } dev_dbg(dev->dev, "completing amthif call back.\n"); - wake_up_interruptible(&dev->iamthif_cl.wait); + wake_up_interruptible(&cl->rx_wait); } /** @@ -497,7 +458,7 @@ static bool mei_clear_list(struct mei_device *dev, /* list all list member */ list_for_each_entry_safe(cb, next, mei_cb_list, list) { /* check if list member associated with a file */ - if (file == cb->file_object) { + if (file == cb->fp) { /* check if cb equal to current iamthif cb */ if (dev->iamthif_current_cb == cb) { dev->iamthif_current_cb = NULL; @@ -523,13 +484,14 @@ static bool mei_clear_list(struct mei_device *dev, * * Return: true if callback removed from the list, false otherwise */ -static bool mei_clear_lists(struct mei_device *dev, struct file *file) +static bool mei_clear_lists(struct mei_device *dev, const struct file *file) { bool removed = false; + struct mei_cl *cl = &dev->iamthif_cl; /* remove callbacks associated with a file */ mei_clear_list(dev, file, &dev->amthif_cmd_list.list); - if (mei_clear_list(dev, file, &dev->amthif_rd_complete_list.list)) + if (mei_clear_list(dev, file, &cl->rd_completed)) removed = true; mei_clear_list(dev, file, &dev->ctrl_rd_list.list); @@ -546,7 +508,7 @@ static bool mei_clear_lists(struct mei_device *dev, struct file *file) /* check if iamthif_current_cb not NULL */ if (dev->iamthif_current_cb && !removed) { /* check file and iamthif current cb association */ - if (dev->iamthif_current_cb->file_object == file) { + if (dev->iamthif_current_cb->fp == file) { /* remove cb */ mei_io_cb_free(dev->iamthif_current_cb); dev->iamthif_current_cb = NULL; @@ -569,7 +531,7 @@ int mei_amthif_release(struct mei_device *dev, struct file *file) if (dev->iamthif_open_count > 0) dev->iamthif_open_count--; - if (dev->iamthif_file_object == file && + if (dev->iamthif_fp == file && dev->iamthif_state != MEI_IAMTHIF_IDLE) { dev_dbg(dev->dev, "amthif canceled iamthif state %d\n", diff --git a/drivers/misc/mei/bus-fixup.c b/drivers/misc/mei/bus-fixup.c index 020de59..e9e6ea3 100644 --- a/drivers/misc/mei/bus-fixup.c +++ b/drivers/misc/mei/bus-fixup.c @@ -35,6 +35,9 @@ static const uuid_le mei_nfc_info_guid = MEI_UUID_NFC_INFO; #define MEI_UUID_NFC_HCI UUID_LE(0x0bb17a78, 0x2a8e, 0x4c50, \ 0x94, 0xd4, 0x50, 0x26, 0x67, 0x23, 0x77, 0x5c) +#define MEI_UUID_WD UUID_LE(0x05B79A6F, 0x4628, 0x4D7F, \ + 0x89, 0x9D, 0xA9, 0x15, 0x14, 0xCB, 0x32, 0xAB) + #define MEI_UUID_ANY NULL_UUID_LE /** @@ -48,8 +51,7 @@ static const uuid_le mei_nfc_info_guid = MEI_UUID_NFC_INFO; */ static void number_of_connections(struct mei_cl_device *cldev) { - dev_dbg(&cldev->dev, "running hook %s on %pUl\n", - __func__, mei_me_cl_uuid(cldev->me_cl)); + dev_dbg(&cldev->dev, "running hook %s\n", __func__); if (cldev->me_cl->props.max_number_of_connections > 1) cldev->do_match = 0; @@ -62,11 +64,36 @@ static void number_of_connections(struct mei_cl_device *cldev) */ static void blacklist(struct mei_cl_device *cldev) { - dev_dbg(&cldev->dev, "running hook %s on %pUl\n", - __func__, mei_me_cl_uuid(cldev->me_cl)); + dev_dbg(&cldev->dev, "running hook %s\n", __func__); + cldev->do_match = 0; } +/** + * mei_wd - wd client on the bus, change protocol version + * as the API has changed. + * + * @cldev: me clients device + */ +#if IS_ENABLED(CONFIG_INTEL_MEI_ME) +#include <linux/pci.h> +#include "hw-me-regs.h" +static void mei_wd(struct mei_cl_device *cldev) +{ + struct pci_dev *pdev = to_pci_dev(cldev->dev.parent); + + dev_dbg(&cldev->dev, "running hook %s\n", __func__); + if (pdev->device == MEI_DEV_ID_WPT_LP || + pdev->device == MEI_DEV_ID_SPT || + pdev->device == MEI_DEV_ID_SPT_H) + cldev->me_cl->props.protocol_version = 0x2; + + cldev->do_match = 1; +} +#else +static inline void mei_wd(struct mei_cl_device *cldev) {} +#endif /* CONFIG_INTEL_MEI_ME */ + struct mei_nfc_cmd { u8 command; u8 status; @@ -208,12 +235,11 @@ static void mei_nfc(struct mei_cl_device *cldev) bus = cldev->bus; - dev_dbg(bus->dev, "running hook %s: %pUl match=%d\n", - __func__, mei_me_cl_uuid(cldev->me_cl), cldev->do_match); + dev_dbg(&cldev->dev, "running hook %s\n", __func__); mutex_lock(&bus->device_lock); /* we need to connect to INFO GUID */ - cl = mei_cl_alloc_linked(bus, MEI_HOST_CLIENT_ID_ANY); + cl = mei_cl_alloc_linked(bus); if (IS_ERR(cl)) { ret = PTR_ERR(cl); cl = NULL; @@ -282,6 +308,7 @@ static struct mei_fixup { MEI_FIXUP(MEI_UUID_ANY, number_of_connections), MEI_FIXUP(MEI_UUID_NFC_INFO, blacklist), MEI_FIXUP(MEI_UUID_NFC_HCI, mei_nfc), + MEI_FIXUP(MEI_UUID_WD, mei_wd), }; /** diff --git a/drivers/misc/mei/bus.c b/drivers/misc/mei/bus.c index 0b05aa9..5d5996e 100644 --- a/drivers/misc/mei/bus.c +++ b/drivers/misc/mei/bus.c @@ -44,7 +44,7 @@ ssize_t __mei_cl_send(struct mei_cl *cl, u8 *buf, size_t length, bool blocking) { struct mei_device *bus; - struct mei_cl_cb *cb = NULL; + struct mei_cl_cb *cb; ssize_t rets; if (WARN_ON(!cl || !cl->dev)) @@ -53,6 +53,11 @@ ssize_t __mei_cl_send(struct mei_cl *cl, u8 *buf, size_t length, bus = cl->dev; mutex_lock(&bus->device_lock); + if (bus->dev_state != MEI_DEV_ENABLED) { + rets = -ENODEV; + goto out; + } + if (!mei_cl_is_connected(cl)) { rets = -ENODEV; goto out; @@ -81,8 +86,6 @@ ssize_t __mei_cl_send(struct mei_cl *cl, u8 *buf, size_t length, out: mutex_unlock(&bus->device_lock); - if (rets < 0) - mei_io_cb_free(cb); return rets; } @@ -109,6 +112,10 @@ ssize_t __mei_cl_recv(struct mei_cl *cl, u8 *buf, size_t length) bus = cl->dev; mutex_lock(&bus->device_lock); + if (bus->dev_state != MEI_DEV_ENABLED) { + rets = -ENODEV; + goto out; + } cb = mei_cl_read_cb(cl, NULL); if (cb) @@ -230,45 +237,55 @@ static void mei_cl_bus_event_work(struct work_struct *work) * mei_cl_bus_notify_event - schedule notify cb on bus client * * @cl: host client + * + * Return: true if event was scheduled + * false if the client is not waiting for event */ -void mei_cl_bus_notify_event(struct mei_cl *cl) +bool mei_cl_bus_notify_event(struct mei_cl *cl) { struct mei_cl_device *cldev = cl->cldev; if (!cldev || !cldev->event_cb) - return; + return false; if (!(cldev->events_mask & BIT(MEI_CL_EVENT_NOTIF))) - return; + return false; if (!cl->notify_ev) - return; + return false; set_bit(MEI_CL_EVENT_NOTIF, &cldev->events); schedule_work(&cldev->event_work); cl->notify_ev = false; + + return true; } /** - * mei_cl_bus_rx_event - schedule rx evenet + * mei_cl_bus_rx_event - schedule rx event * * @cl: host client + * + * Return: true if event was scheduled + * false if the client is not waiting for event */ -void mei_cl_bus_rx_event(struct mei_cl *cl) +bool mei_cl_bus_rx_event(struct mei_cl *cl) { struct mei_cl_device *cldev = cl->cldev; if (!cldev || !cldev->event_cb) - return; + return false; if (!(cldev->events_mask & BIT(MEI_CL_EVENT_RX))) - return; + return false; set_bit(MEI_CL_EVENT_RX, &cldev->events); schedule_work(&cldev->event_work); + + return true; } /** @@ -398,7 +415,7 @@ int mei_cldev_enable(struct mei_cl_device *cldev) if (!cl) { mutex_lock(&bus->device_lock); - cl = mei_cl_alloc_linked(bus, MEI_HOST_CLIENT_ID_ANY); + cl = mei_cl_alloc_linked(bus); mutex_unlock(&bus->device_lock); if (IS_ERR(cl)) return PTR_ERR(cl); @@ -958,6 +975,22 @@ void mei_cl_bus_rescan(struct mei_device *bus) dev_dbg(bus->dev, "rescan end"); } +void mei_cl_bus_rescan_work(struct work_struct *work) +{ + struct mei_device *bus = + container_of(work, struct mei_device, bus_rescan_work); + struct mei_me_client *me_cl; + + mutex_lock(&bus->device_lock); + me_cl = mei_me_cl_by_uuid(bus, &mei_amthif_guid); + if (me_cl) + mei_amthif_host_init(bus, me_cl); + mei_me_cl_put(me_cl); + mutex_unlock(&bus->device_lock); + + mei_cl_bus_rescan(bus); +} + int __mei_cldev_driver_register(struct mei_cl_driver *cldrv, struct module *owner) { diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c index a6c87c7..bab17e4 100644 --- a/drivers/misc/mei/client.c +++ b/drivers/misc/mei/client.c @@ -359,7 +359,7 @@ void mei_io_cb_free(struct mei_cl_cb *cb) * Return: mei_cl_cb pointer or NULL; */ struct mei_cl_cb *mei_io_cb_init(struct mei_cl *cl, enum mei_cb_file_ops type, - struct file *fp) + const struct file *fp) { struct mei_cl_cb *cb; @@ -368,7 +368,7 @@ struct mei_cl_cb *mei_io_cb_init(struct mei_cl *cl, enum mei_cb_file_ops type, return NULL; INIT_LIST_HEAD(&cb->list); - cb->file_object = fp; + cb->fp = fp; cb->cl = cl; cb->buf_idx = 0; cb->fop_type = type; @@ -455,7 +455,8 @@ int mei_io_cb_alloc_buf(struct mei_cl_cb *cb, size_t length) * Return: cb on success and NULL on failure */ struct mei_cl_cb *mei_cl_alloc_cb(struct mei_cl *cl, size_t length, - enum mei_cb_file_ops type, struct file *fp) + enum mei_cb_file_ops type, + const struct file *fp) { struct mei_cl_cb *cb; @@ -485,7 +486,7 @@ struct mei_cl_cb *mei_cl_read_cb(const struct mei_cl *cl, const struct file *fp) struct mei_cl_cb *cb; list_for_each_entry(cb, &cl->rd_completed, list) - if (!fp || fp == cb->file_object) + if (!fp || fp == cb->fp) return cb; return NULL; @@ -503,12 +504,12 @@ void mei_cl_read_cb_flush(const struct mei_cl *cl, const struct file *fp) struct mei_cl_cb *cb, *next; list_for_each_entry_safe(cb, next, &cl->rd_completed, list) - if (!fp || fp == cb->file_object) + if (!fp || fp == cb->fp) mei_io_cb_free(cb); list_for_each_entry_safe(cb, next, &cl->rd_pending, list) - if (!fp || fp == cb->file_object) + if (!fp || fp == cb->fp) mei_io_cb_free(cb); } @@ -535,7 +536,6 @@ int mei_cl_flush_queues(struct mei_cl *cl, const struct file *fp) mei_io_list_flush(&cl->dev->ctrl_wr_list, cl); mei_io_list_flush(&cl->dev->ctrl_rd_list, cl); mei_io_list_flush(&cl->dev->amthif_cmd_list, cl); - mei_io_list_flush(&cl->dev->amthif_rd_complete_list, cl); mei_cl_read_cb_flush(cl, fp); @@ -587,27 +587,23 @@ struct mei_cl *mei_cl_allocate(struct mei_device *dev) * mei_cl_link - allocate host id in the host map * * @cl: host client - * @id: fixed host id or MEI_HOST_CLIENT_ID_ANY (-1) for generic one * * Return: 0 on success * -EINVAL on incorrect values * -EMFILE if open count exceeded. */ -int mei_cl_link(struct mei_cl *cl, int id) +int mei_cl_link(struct mei_cl *cl) { struct mei_device *dev; long open_handle_count; + int id; if (WARN_ON(!cl || !cl->dev)) return -EINVAL; dev = cl->dev; - /* If Id is not assigned get one*/ - if (id == MEI_HOST_CLIENT_ID_ANY) - id = find_first_zero_bit(dev->host_clients_map, - MEI_CLIENTS_MAX); - + id = find_first_zero_bit(dev->host_clients_map, MEI_CLIENTS_MAX); if (id >= MEI_CLIENTS_MAX) { dev_err(dev->dev, "id exceeded %d", MEI_CLIENTS_MAX); return -EMFILE; @@ -648,7 +644,7 @@ int mei_cl_unlink(struct mei_cl *cl) if (!cl) return 0; - /* wd and amthif might not be initialized */ + /* amthif might not be initialized */ if (!cl->dev) return 0; @@ -670,31 +666,12 @@ int mei_cl_unlink(struct mei_cl *cl) return 0; } - -void mei_host_client_init(struct work_struct *work) +void mei_host_client_init(struct mei_device *dev) { - struct mei_device *dev = - container_of(work, struct mei_device, init_work); - struct mei_me_client *me_cl; - - mutex_lock(&dev->device_lock); - - - me_cl = mei_me_cl_by_uuid(dev, &mei_amthif_guid); - if (me_cl) - mei_amthif_host_init(dev, me_cl); - mei_me_cl_put(me_cl); - - me_cl = mei_me_cl_by_uuid(dev, &mei_wd_guid); - if (me_cl) - mei_wd_host_init(dev, me_cl); - mei_me_cl_put(me_cl); - dev->dev_state = MEI_DEV_ENABLED; dev->reset_count = 0; - mutex_unlock(&dev->device_lock); - mei_cl_bus_rescan(dev); + schedule_work(&dev->bus_rescan_work); pm_runtime_mark_last_busy(dev->dev); dev_dbg(dev->dev, "rpm: autosuspend\n"); @@ -726,6 +703,33 @@ bool mei_hbuf_acquire(struct mei_device *dev) } /** + * mei_cl_wake_all - wake up readers, writers and event waiters so + * they can be interrupted + * + * @cl: host client + */ +static void mei_cl_wake_all(struct mei_cl *cl) +{ + struct mei_device *dev = cl->dev; + + /* synchronized under device mutex */ + if (waitqueue_active(&cl->rx_wait)) { + cl_dbg(dev, cl, "Waking up reading client!\n"); + wake_up_interruptible(&cl->rx_wait); + } + /* synchronized under device mutex */ + if (waitqueue_active(&cl->tx_wait)) { + cl_dbg(dev, cl, "Waking up writing client!\n"); + wake_up_interruptible(&cl->tx_wait); + } + /* synchronized under device mutex */ + if (waitqueue_active(&cl->ev_wait)) { + cl_dbg(dev, cl, "Waking up waiting for event clients!\n"); + wake_up_interruptible(&cl->ev_wait); + } +} + +/** * mei_cl_set_disconnected - set disconnected state and clear * associated states and resources * @@ -740,8 +744,11 @@ void mei_cl_set_disconnected(struct mei_cl *cl) return; cl->state = MEI_FILE_DISCONNECTED; + mei_io_list_free(&dev->write_list, cl); + mei_io_list_free(&dev->write_waiting_list, cl); mei_io_list_flush(&dev->ctrl_rd_list, cl); mei_io_list_flush(&dev->ctrl_wr_list, cl); + mei_cl_wake_all(cl); cl->mei_flow_ctrl_creds = 0; cl->timer_count = 0; @@ -1034,7 +1041,7 @@ int mei_cl_irq_connect(struct mei_cl *cl, struct mei_cl_cb *cb, * Return: 0 on success, <0 on failure. */ int mei_cl_connect(struct mei_cl *cl, struct mei_me_client *me_cl, - struct file *file) + const struct file *file) { struct mei_device *dev; struct mei_cl_cb *cb; @@ -1119,11 +1126,10 @@ nortpm: * mei_cl_alloc_linked - allocate and link host client * * @dev: the device structure - * @id: fixed host id or MEI_HOST_CLIENT_ID_ANY (-1) for generic one * * Return: cl on success ERR_PTR on failure */ -struct mei_cl *mei_cl_alloc_linked(struct mei_device *dev, int id) +struct mei_cl *mei_cl_alloc_linked(struct mei_device *dev) { struct mei_cl *cl; int ret; @@ -1134,7 +1140,7 @@ struct mei_cl *mei_cl_alloc_linked(struct mei_device *dev, int id) goto err; } - ret = mei_cl_link(cl, id); + ret = mei_cl_link(cl); if (ret) goto err; @@ -1149,11 +1155,12 @@ err: /** * mei_cl_flow_ctrl_creds - checks flow_control credits for cl. * - * @cl: private data of the file object + * @cl: host client + * @fp: the file pointer associated with the pointer * * Return: 1 if mei_flow_ctrl_creds >0, 0 - otherwise. */ -int mei_cl_flow_ctrl_creds(struct mei_cl *cl) +static int mei_cl_flow_ctrl_creds(struct mei_cl *cl, const struct file *fp) { int rets; @@ -1164,7 +1171,7 @@ int mei_cl_flow_ctrl_creds(struct mei_cl *cl) return 1; if (mei_cl_is_fixed_address(cl)) { - rets = mei_cl_read_start(cl, mei_cl_mtu(cl), NULL); + rets = mei_cl_read_start(cl, mei_cl_mtu(cl), fp); if (rets && rets != -EBUSY) return rets; return 1; @@ -1186,7 +1193,7 @@ int mei_cl_flow_ctrl_creds(struct mei_cl *cl) * 0 on success * -EINVAL when ctrl credits are <= 0 */ -int mei_cl_flow_ctrl_reduce(struct mei_cl *cl) +static int mei_cl_flow_ctrl_reduce(struct mei_cl *cl) { if (WARN_ON(!cl || !cl->me_cl)) return -EINVAL; @@ -1283,7 +1290,8 @@ int mei_cl_irq_notify(struct mei_cl *cl, struct mei_cl_cb *cb, * * Return: 0 on such and error otherwise. */ -int mei_cl_notify_request(struct mei_cl *cl, struct file *file, u8 request) +int mei_cl_notify_request(struct mei_cl *cl, + const struct file *file, u8 request) { struct mei_device *dev; struct mei_cl_cb *cb; @@ -1368,12 +1376,12 @@ void mei_cl_notify(struct mei_cl *cl) cl_dbg(dev, cl, "notify event"); cl->notify_ev = true; - wake_up_interruptible_all(&cl->ev_wait); + if (!mei_cl_bus_notify_event(cl)) + wake_up_interruptible(&cl->ev_wait); if (cl->ev_async) kill_fasync(&cl->ev_async, SIGIO, POLL_PRI); - mei_cl_bus_notify_event(cl); } /** @@ -1422,6 +1430,25 @@ out: } /** + * mei_cl_is_read_fc_cb - check if read cb is waiting for flow control + * for given host client + * + * @cl: host client + * + * Return: true, if found at least one cb. + */ +static bool mei_cl_is_read_fc_cb(struct mei_cl *cl) +{ + struct mei_device *dev = cl->dev; + struct mei_cl_cb *cb; + + list_for_each_entry(cb, &dev->ctrl_wr_list.list, list) + if (cb->fop_type == MEI_FOP_READ && cb->cl == cl) + return true; + return false; +} + +/** * mei_cl_read_start - the start read client message function. * * @cl: host client @@ -1430,7 +1457,7 @@ out: * * Return: 0 on success, <0 on failure. */ -int mei_cl_read_start(struct mei_cl *cl, size_t length, struct file *fp) +int mei_cl_read_start(struct mei_cl *cl, size_t length, const struct file *fp) { struct mei_device *dev; struct mei_cl_cb *cb; @@ -1445,7 +1472,7 @@ int mei_cl_read_start(struct mei_cl *cl, size_t length, struct file *fp) return -ENODEV; /* HW currently supports only one pending read */ - if (!list_empty(&cl->rd_pending)) + if (!list_empty(&cl->rd_pending) || mei_cl_is_read_fc_cb(cl)) return -EBUSY; if (!mei_me_cl_is_active(cl->me_cl)) { @@ -1524,7 +1551,7 @@ int mei_cl_irq_write(struct mei_cl *cl, struct mei_cl_cb *cb, first_chunk = cb->buf_idx == 0; - rets = first_chunk ? mei_cl_flow_ctrl_creds(cl) : 1; + rets = first_chunk ? mei_cl_flow_ctrl_creds(cl, cb->fp) : 1; if (rets < 0) return rets; @@ -1556,7 +1583,7 @@ int mei_cl_irq_write(struct mei_cl *cl, struct mei_cl_cb *cb, return 0; } - cl_dbg(dev, cl, "buf: size = %d idx = %lu\n", + cl_dbg(dev, cl, "buf: size = %zu idx = %zu\n", cb->buf.size, cb->buf_idx); rets = mei_write_message(dev, &mei_hdr, buf->data + cb->buf_idx); @@ -1618,7 +1645,7 @@ int mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb, bool blocking) if (rets < 0 && rets != -EINPROGRESS) { pm_runtime_put_noidle(dev->dev); cl_err(dev, cl, "rpm: get failed %d\n", rets); - return rets; + goto free; } cb->buf_idx = 0; @@ -1630,7 +1657,7 @@ int mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb, bool blocking) mei_hdr.msg_complete = 0; mei_hdr.internal = cb->internal; - rets = mei_cl_flow_ctrl_creds(cl); + rets = mei_cl_flow_ctrl_creds(cl, cb->fp); if (rets < 0) goto err; @@ -1677,7 +1704,8 @@ out: mutex_unlock(&dev->device_lock); rets = wait_event_interruptible(cl->tx_wait, - cl->writing_state == MEI_WRITE_COMPLETE); + cl->writing_state == MEI_WRITE_COMPLETE || + (!mei_cl_is_connected(cl))); mutex_lock(&dev->device_lock); /* wait_event_interruptible returns -ERESTARTSYS */ if (rets) { @@ -1685,6 +1713,10 @@ out: rets = -EINTR; goto err; } + if (cl->writing_state != MEI_WRITE_COMPLETE) { + rets = -EFAULT; + goto err; + } } rets = size; @@ -1692,6 +1724,8 @@ err: cl_dbg(dev, cl, "rpm: autosuspend\n"); pm_runtime_mark_last_busy(dev->dev); pm_runtime_put_autosuspend(dev->dev); +free: + mei_io_cb_free(cb); return rets; } @@ -1721,10 +1755,8 @@ void mei_cl_complete(struct mei_cl *cl, struct mei_cl_cb *cb) case MEI_FOP_READ: list_add_tail(&cb->list, &cl->rd_completed); - if (waitqueue_active(&cl->rx_wait)) - wake_up_interruptible_all(&cl->rx_wait); - else - mei_cl_bus_rx_event(cl); + if (!mei_cl_bus_rx_event(cl)) + wake_up_interruptible(&cl->rx_wait); break; case MEI_FOP_CONNECT: @@ -1753,44 +1785,3 @@ void mei_cl_all_disconnect(struct mei_device *dev) list_for_each_entry(cl, &dev->file_list, link) mei_cl_set_disconnected(cl); } - - -/** - * mei_cl_all_wakeup - wake up all readers and writers they can be interrupted - * - * @dev: mei device - */ -void mei_cl_all_wakeup(struct mei_device *dev) -{ - struct mei_cl *cl; - - list_for_each_entry(cl, &dev->file_list, link) { - if (waitqueue_active(&cl->rx_wait)) { - cl_dbg(dev, cl, "Waking up reading client!\n"); - wake_up_interruptible(&cl->rx_wait); - } - if (waitqueue_active(&cl->tx_wait)) { - cl_dbg(dev, cl, "Waking up writing client!\n"); - wake_up_interruptible(&cl->tx_wait); - } - - /* synchronized under device mutex */ - if (waitqueue_active(&cl->ev_wait)) { - cl_dbg(dev, cl, "Waking up waiting for event clients!\n"); - wake_up_interruptible(&cl->ev_wait); - } - } -} - -/** - * mei_cl_all_write_clear - clear all pending writes - * - * @dev: mei device - */ -void mei_cl_all_write_clear(struct mei_device *dev) -{ - mei_io_list_free(&dev->write_list, NULL); - mei_io_list_free(&dev->write_waiting_list, NULL); -} - - diff --git a/drivers/misc/mei/client.h b/drivers/misc/mei/client.h index 04e1aa3..0d7a3a1 100644 --- a/drivers/misc/mei/client.h +++ b/drivers/misc/mei/client.h @@ -18,7 +18,6 @@ #define _MEI_CLIENT_H_ #include <linux/types.h> -#include <linux/watchdog.h> #include <linux/poll.h> #include <linux/mei.h> @@ -84,7 +83,7 @@ static inline u8 mei_me_cl_ver(const struct mei_me_client *me_cl) * MEI IO Functions */ struct mei_cl_cb *mei_io_cb_init(struct mei_cl *cl, enum mei_cb_file_ops type, - struct file *fp); + const struct file *fp); void mei_io_cb_free(struct mei_cl_cb *priv_cb); int mei_io_cb_alloc_buf(struct mei_cl_cb *cb, size_t length); @@ -108,21 +107,19 @@ struct mei_cl *mei_cl_allocate(struct mei_device *dev); void mei_cl_init(struct mei_cl *cl, struct mei_device *dev); -int mei_cl_link(struct mei_cl *cl, int id); +int mei_cl_link(struct mei_cl *cl); int mei_cl_unlink(struct mei_cl *cl); -struct mei_cl *mei_cl_alloc_linked(struct mei_device *dev, int id); +struct mei_cl *mei_cl_alloc_linked(struct mei_device *dev); struct mei_cl_cb *mei_cl_read_cb(const struct mei_cl *cl, const struct file *fp); void mei_cl_read_cb_flush(const struct mei_cl *cl, const struct file *fp); struct mei_cl_cb *mei_cl_alloc_cb(struct mei_cl *cl, size_t length, - enum mei_cb_file_ops type, struct file *fp); + enum mei_cb_file_ops type, + const struct file *fp); int mei_cl_flush_queues(struct mei_cl *cl, const struct file *fp); -int mei_cl_flow_ctrl_creds(struct mei_cl *cl); - -int mei_cl_flow_ctrl_reduce(struct mei_cl *cl); /* * MEI input output function prototype */ @@ -217,10 +214,10 @@ void mei_cl_set_disconnected(struct mei_cl *cl); int mei_cl_irq_disconnect(struct mei_cl *cl, struct mei_cl_cb *cb, struct mei_cl_cb *cmpl_list); int mei_cl_connect(struct mei_cl *cl, struct mei_me_client *me_cl, - struct file *file); + const struct file *file); int mei_cl_irq_connect(struct mei_cl *cl, struct mei_cl_cb *cb, struct mei_cl_cb *cmpl_list); -int mei_cl_read_start(struct mei_cl *cl, size_t length, struct file *fp); +int mei_cl_read_start(struct mei_cl *cl, size_t length, const struct file *fp); int mei_cl_irq_read_msg(struct mei_cl *cl, struct mei_msg_hdr *hdr, struct mei_cl_cb *cmpl_list); int mei_cl_write(struct mei_cl *cl, struct mei_cl_cb *cb, bool blocking); @@ -229,19 +226,18 @@ int mei_cl_irq_write(struct mei_cl *cl, struct mei_cl_cb *cb, void mei_cl_complete(struct mei_cl *cl, struct mei_cl_cb *cb); -void mei_host_client_init(struct work_struct *work); +void mei_host_client_init(struct mei_device *dev); u8 mei_cl_notify_fop2req(enum mei_cb_file_ops fop); enum mei_cb_file_ops mei_cl_notify_req2fop(u8 request); -int mei_cl_notify_request(struct mei_cl *cl, struct file *file, u8 request); +int mei_cl_notify_request(struct mei_cl *cl, + const struct file *file, u8 request); int mei_cl_irq_notify(struct mei_cl *cl, struct mei_cl_cb *cb, struct mei_cl_cb *cmpl_list); int mei_cl_notify_get(struct mei_cl *cl, bool block, bool *notify_ev); void mei_cl_notify(struct mei_cl *cl); void mei_cl_all_disconnect(struct mei_device *dev); -void mei_cl_all_wakeup(struct mei_device *dev); -void mei_cl_all_write_clear(struct mei_device *dev); #define MEI_CL_FMT "cl:host=%02d me=%02d " #define MEI_CL_PRM(cl) (cl)->host_client_id, mei_cl_me_id(cl) @@ -249,6 +245,9 @@ void mei_cl_all_write_clear(struct mei_device *dev); #define cl_dbg(dev, cl, format, arg...) \ dev_dbg((dev)->dev, MEI_CL_FMT format, MEI_CL_PRM(cl), ##arg) +#define cl_warn(dev, cl, format, arg...) \ + dev_warn((dev)->dev, MEI_CL_FMT format, MEI_CL_PRM(cl), ##arg) + #define cl_err(dev, cl, format, arg...) \ dev_err((dev)->dev, MEI_CL_FMT format, MEI_CL_PRM(cl), ##arg) diff --git a/drivers/misc/mei/debugfs.c b/drivers/misc/mei/debugfs.c index a138d8a..c6c051b 100644 --- a/drivers/misc/mei/debugfs.c +++ b/drivers/misc/mei/debugfs.c @@ -50,6 +50,7 @@ static ssize_t mei_dbgfs_read_meclients(struct file *fp, char __user *ubuf, } pos += scnprintf(buf + pos, bufsz - pos, HDR); +#undef HDR /* if the driver is not enabled the list won't be consistent */ if (dev->dev_state != MEI_DEV_ENABLED) @@ -90,23 +91,37 @@ static ssize_t mei_dbgfs_read_active(struct file *fp, char __user *ubuf, { struct mei_device *dev = fp->private_data; struct mei_cl *cl; - const size_t bufsz = 1024; + size_t bufsz = 1; char *buf; int i = 0; int pos = 0; int ret; +#define HDR " |me|host|state|rd|wr|\n" + if (!dev) return -ENODEV; + mutex_lock(&dev->device_lock); + + /* + * if the driver is not enabled the list won't be consistent, + * we output empty table + */ + if (dev->dev_state == MEI_DEV_ENABLED) + list_for_each_entry(cl, &dev->file_list, link) + bufsz++; + + bufsz *= sizeof(HDR) + 1; + buf = kzalloc(bufsz, GFP_KERNEL); - if (!buf) + if (!buf) { + mutex_unlock(&dev->device_lock); return -ENOMEM; + } - pos += scnprintf(buf + pos, bufsz - pos, - " |me|host|state|rd|wr|\n"); - - mutex_lock(&dev->device_lock); + pos += scnprintf(buf + pos, bufsz - pos, HDR); +#undef HDR /* if the driver is not enabled the list won't be consistent */ if (dev->dev_state != MEI_DEV_ENABLED) @@ -115,7 +130,7 @@ static ssize_t mei_dbgfs_read_active(struct file *fp, char __user *ubuf, list_for_each_entry(cl, &dev->file_list, link) { pos += scnprintf(buf + pos, bufsz - pos, - "%2d|%2d|%4d|%5d|%2d|%2d|\n", + "%3d|%2d|%4d|%5d|%2d|%2d|\n", i, mei_cl_me_id(cl), cl->host_client_id, cl->state, !list_empty(&cl->rd_completed), cl->writing_state); i++; @@ -150,16 +165,21 @@ static ssize_t mei_dbgfs_read_devstate(struct file *fp, char __user *ubuf, pos += scnprintf(buf + pos, bufsz - pos, "hbm: %s\n", mei_hbm_state_str(dev->hbm_state)); - if (dev->hbm_state == MEI_HBM_STARTED) { + if (dev->hbm_state >= MEI_HBM_ENUM_CLIENTS && + dev->hbm_state <= MEI_HBM_STARTED) { pos += scnprintf(buf + pos, bufsz - pos, "hbm features:\n"); pos += scnprintf(buf + pos, bufsz - pos, "\tPG: %01d\n", dev->hbm_f_pg_supported); pos += scnprintf(buf + pos, bufsz - pos, "\tDC: %01d\n", dev->hbm_f_dc_supported); + pos += scnprintf(buf + pos, bufsz - pos, "\tIE: %01d\n", + dev->hbm_f_ie_supported); pos += scnprintf(buf + pos, bufsz - pos, "\tDOT: %01d\n", dev->hbm_f_dot_supported); pos += scnprintf(buf + pos, bufsz - pos, "\tEV: %01d\n", dev->hbm_f_ev_supported); + pos += scnprintf(buf + pos, bufsz - pos, "\tFA: %01d\n", + dev->hbm_f_fa_supported); } pos += scnprintf(buf + pos, bufsz - pos, "pg: %s, %s\n", @@ -175,6 +195,30 @@ static const struct file_operations mei_dbgfs_fops_devstate = { .llseek = generic_file_llseek, }; +static ssize_t mei_dbgfs_write_allow_fa(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct mei_device *dev; + int ret; + + dev = container_of(file->private_data, + struct mei_device, allow_fixed_address); + + ret = debugfs_write_file_bool(file, user_buf, count, ppos); + if (ret < 0) + return ret; + dev->override_fixed_address = true; + return ret; +} + +static const struct file_operations mei_dbgfs_fops_allow_fa = { + .open = simple_open, + .read = debugfs_read_file_bool, + .write = mei_dbgfs_write_allow_fa, + .llseek = generic_file_llseek, +}; + /** * mei_dbgfs_deregister - Remove the debugfs files and directories * @@ -224,8 +268,9 @@ int mei_dbgfs_register(struct mei_device *dev, const char *name) dev_err(dev->dev, "devstate: registration failed\n"); goto err; } - f = debugfs_create_bool("allow_fixed_address", S_IRUSR | S_IWUSR, dir, - &dev->allow_fixed_address); + f = debugfs_create_file("allow_fixed_address", S_IRUSR | S_IWUSR, dir, + &dev->allow_fixed_address, + &mei_dbgfs_fops_allow_fa); if (!f) { dev_err(dev->dev, "allow_fixed_address: registration failed\n"); goto err; diff --git a/drivers/misc/mei/hbm.c b/drivers/misc/mei/hbm.c index e7b7aad..5e305d2 100644 --- a/drivers/misc/mei/hbm.c +++ b/drivers/misc/mei/hbm.c @@ -301,7 +301,10 @@ static int mei_hbm_enum_clients_req(struct mei_device *dev) enum_req = (struct hbm_host_enum_request *)dev->wr_msg.data; memset(enum_req, 0, len); enum_req->hbm_cmd = HOST_ENUM_REQ_CMD; - enum_req->allow_add = dev->hbm_f_dc_supported; + enum_req->flags |= dev->hbm_f_dc_supported ? + MEI_HBM_ENUM_F_ALLOW_ADD : 0; + enum_req->flags |= dev->hbm_f_ie_supported ? + MEI_HBM_ENUM_F_IMMEDIATE_ENUM : 0; ret = mei_write_message(dev, mei_hdr, dev->wr_msg.data); if (ret) { @@ -401,6 +404,9 @@ static int mei_hbm_fw_add_cl_req(struct mei_device *dev, if (ret) status = !MEI_HBMS_SUCCESS; + if (dev->dev_state == MEI_DEV_ENABLED) + schedule_work(&dev->bus_rescan_work); + return mei_hbm_add_cl_resp(dev, req->me_addr, status); } @@ -543,7 +549,7 @@ static int mei_hbm_prop_req(struct mei_device *dev) /* We got all client properties */ if (next_client_index == MEI_CLIENTS_MAX) { dev->hbm_state = MEI_HBM_STARTED; - schedule_work(&dev->init_work); + mei_host_client_init(dev); return 0; } @@ -789,8 +795,11 @@ static void mei_hbm_cl_connect_res(struct mei_device *dev, struct mei_cl *cl, cl->state = MEI_FILE_CONNECTED; else { cl->state = MEI_FILE_DISCONNECT_REPLY; - if (rs->status == MEI_CL_CONN_NOT_FOUND) + if (rs->status == MEI_CL_CONN_NOT_FOUND) { mei_me_cl_del(dev, cl->me_cl); + if (dev->dev_state == MEI_DEV_ENABLED) + schedule_work(&dev->bus_rescan_work); + } } cl->status = mei_cl_conn_status_to_errno(rs->status); } @@ -866,7 +875,7 @@ static int mei_hbm_fw_disconnect_req(struct mei_device *dev, cl = mei_hbm_cl_find_by_cmd(dev, disconnect_req); if (cl) { - cl_dbg(dev, cl, "fw disconnect request received\n"); + cl_warn(dev, cl, "fw disconnect request received\n"); cl->state = MEI_FILE_DISCONNECTING; cl->timer_count = 0; @@ -972,6 +981,9 @@ static void mei_hbm_config_features(struct mei_device *dev) if (dev->version.major_version >= HBM_MAJOR_VERSION_DC) dev->hbm_f_dc_supported = 1; + if (dev->version.major_version >= HBM_MAJOR_VERSION_IE) + dev->hbm_f_ie_supported = 1; + /* disconnect on connect timeout instead of link reset */ if (dev->version.major_version >= HBM_MAJOR_VERSION_DOT) dev->hbm_f_dot_supported = 1; @@ -979,6 +991,10 @@ static void mei_hbm_config_features(struct mei_device *dev) /* Notification Event Support */ if (dev->version.major_version >= HBM_MAJOR_VERSION_EV) dev->hbm_f_ev_supported = 1; + + /* Fixed Address Client Support */ + if (dev->version.major_version >= HBM_MAJOR_VERSION_FA) + dev->hbm_f_fa_supported = 1; } /** diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h index a8a68ac..0dcb854 100644 --- a/drivers/misc/mei/hw-me-regs.h +++ b/drivers/misc/mei/hw-me-regs.h @@ -121,6 +121,10 @@ #define MEI_DEV_ID_SPT_2 0x9D3B /* Sunrise Point 2 */ #define MEI_DEV_ID_SPT_H 0xA13A /* Sunrise Point H */ #define MEI_DEV_ID_SPT_H_2 0xA13B /* Sunrise Point H 2 */ + +#define MEI_DEV_ID_BXT_M 0x1A9A /* Broxton M */ +#define MEI_DEV_ID_APL_I 0x5A9A /* Apollo Lake I */ + /* * MEI HW Section */ diff --git a/drivers/misc/mei/hw-me.c b/drivers/misc/mei/hw-me.c index 25b1997..e2fb44c 100644 --- a/drivers/misc/mei/hw-me.c +++ b/drivers/misc/mei/hw-me.c @@ -189,8 +189,11 @@ static int mei_me_fw_status(struct mei_device *dev, fw_status->count = fw_src->count; for (i = 0; i < fw_src->count && i < MEI_FW_STATUS_MAX; i++) { - ret = pci_read_config_dword(pdev, - fw_src->status[i], &fw_status->status[i]); + ret = pci_read_config_dword(pdev, fw_src->status[i], + &fw_status->status[i]); + trace_mei_pci_cfg_read(dev->dev, "PCI_CFG_HSF_X", + fw_src->status[i], + fw_status->status[i]); if (ret) return ret; } @@ -215,6 +218,7 @@ static void mei_me_hw_config(struct mei_device *dev) reg = 0; pci_read_config_dword(pdev, PCI_CFG_HFS_1, ®); + trace_mei_pci_cfg_read(dev->dev, "PCI_CFG_HFS_1", PCI_CFG_HFS_1, reg); hw->d0i3_supported = ((reg & PCI_CFG_HFS_1_D0I3_MSK) == PCI_CFG_HFS_1_D0I3_MSK); @@ -1248,6 +1252,7 @@ static bool mei_me_fw_type_nm(struct pci_dev *pdev) u32 reg; pci_read_config_dword(pdev, PCI_CFG_HFS_2, ®); + trace_mei_pci_cfg_read(&pdev->dev, "PCI_CFG_HFS_2", PCI_CFG_HFS_2, reg); /* make sure that bit 9 (NM) is up and bit 10 (DM) is down */ return (reg & 0x600) == 0x200; } @@ -1260,6 +1265,7 @@ static bool mei_me_fw_type_sps(struct pci_dev *pdev) u32 reg; /* Read ME FW Status check for SPS Firmware */ pci_read_config_dword(pdev, PCI_CFG_HFS_1, ®); + trace_mei_pci_cfg_read(&pdev->dev, "PCI_CFG_HFS_1", PCI_CFG_HFS_1, reg); /* if bits [19:16] = 15, running SPS Firmware */ return (reg & 0xf0000) == 0xf0000; } diff --git a/drivers/misc/mei/hw-txe.c b/drivers/misc/mei/hw-txe.c index bae680c..4a6c1b8 100644 --- a/drivers/misc/mei/hw-txe.c +++ b/drivers/misc/mei/hw-txe.c @@ -28,6 +28,9 @@ #include "client.h" #include "hbm.h" +#include "mei-trace.h" + + /** * mei_txe_reg_read - Reads 32bit data from the txe device * @@ -640,8 +643,11 @@ static int mei_txe_fw_status(struct mei_device *dev, fw_status->count = fw_src->count; for (i = 0; i < fw_src->count && i < MEI_FW_STATUS_MAX; i++) { - ret = pci_read_config_dword(pdev, - fw_src->status[i], &fw_status->status[i]); + ret = pci_read_config_dword(pdev, fw_src->status[i], + &fw_status->status[i]); + trace_mei_pci_cfg_read(dev->dev, "PCI_CFG_HSF_X", + fw_src->status[i], + fw_status->status[i]); if (ret) return ret; } diff --git a/drivers/misc/mei/hw.h b/drivers/misc/mei/hw.h index 4cebde8..9daf3f9 100644 --- a/drivers/misc/mei/hw.h +++ b/drivers/misc/mei/hw.h @@ -29,7 +29,6 @@ #define MEI_CLIENTS_INIT_TIMEOUT 15 /* HPS: Clients Enumeration Timeout */ #define MEI_IAMTHIF_STALL_TIMER 12 /* HPS */ -#define MEI_IAMTHIF_READ_TIMER 10 /* HPS */ #define MEI_PGI_TIMEOUT 1 /* PG Isolation time response 1 sec */ #define MEI_D0I3_TIMEOUT 5 /* D0i3 set/unset max response time */ @@ -54,6 +53,12 @@ #define HBM_MAJOR_VERSION_DC 2 /* + * MEI version with immediate reply to enum request support + */ +#define HBM_MINOR_VERSION_IE 0 +#define HBM_MAJOR_VERSION_IE 2 + +/* * MEI version with disconnect on connection timeout support */ #define HBM_MINOR_VERSION_DOT 0 @@ -65,6 +70,12 @@ #define HBM_MINOR_VERSION_EV 0 #define HBM_MAJOR_VERSION_EV 2 +/* + * MEI version with fixed address client support + */ +#define HBM_MINOR_VERSION_FA 0 +#define HBM_MAJOR_VERSION_FA 2 + /* Host bus message command opcode */ #define MEI_HBM_CMD_OP_MSK 0x7f /* Host bus message command RESPONSE */ @@ -241,15 +252,26 @@ struct hbm_me_stop_request { } __packed; /** - * struct hbm_host_enum_request - enumeration request from host to fw + * enum hbm_host_enum_flags - enumeration request flags (HBM version >= 2.0) * - * @hbm_cmd: bus message command header - * @allow_add: allow dynamic clients add HBM version >= 2.0 + * @MEI_HBM_ENUM_F_ALLOW_ADD: allow dynamic clients add + * @MEI_HBM_ENUM_F_IMMEDIATE_ENUM: allow FW to send answer immediately + */ +enum hbm_host_enum_flags { + MEI_HBM_ENUM_F_ALLOW_ADD = BIT(0), + MEI_HBM_ENUM_F_IMMEDIATE_ENUM = BIT(1), +}; + +/** + * struct hbm_host_enum_request - enumeration request from host to fw + * + * @hbm_cmd : bus message command header + * @flags : request flags * @reserved: reserved */ struct hbm_host_enum_request { u8 hbm_cmd; - u8 allow_add; + u8 flags; u8 reserved[2]; } __packed; diff --git a/drivers/misc/mei/init.c b/drivers/misc/mei/init.c index 3edafc8..f7c8dfd 100644 --- a/drivers/misc/mei/init.c +++ b/drivers/misc/mei/init.c @@ -91,8 +91,8 @@ EXPORT_SYMBOL_GPL(mei_fw_status2str); */ void mei_cancel_work(struct mei_device *dev) { - cancel_work_sync(&dev->init_work); cancel_work_sync(&dev->reset_work); + cancel_work_sync(&dev->bus_rescan_work); cancel_delayed_work(&dev->timer_work); } @@ -148,16 +148,10 @@ int mei_reset(struct mei_device *dev) state != MEI_DEV_POWER_UP) { /* remove all waiting requests */ - mei_cl_all_write_clear(dev); - mei_cl_all_disconnect(dev); - /* wake up all readers and writers so they can be interrupted */ - mei_cl_all_wakeup(dev); - /* remove entry if already in list */ - dev_dbg(dev->dev, "remove iamthif and wd from the file list.\n"); - mei_cl_unlink(&dev->wd_cl); + dev_dbg(dev->dev, "remove iamthif from the file list.\n"); mei_cl_unlink(&dev->iamthif_cl); mei_amthif_reset_params(dev); } @@ -165,7 +159,6 @@ int mei_reset(struct mei_device *dev) mei_hbm_reset(dev); dev->rd_msg_hdr = 0; - dev->wd_pending = false; if (ret) { dev_err(dev->dev, "hw_reset failed ret = %d\n", ret); @@ -335,16 +328,12 @@ void mei_stop(struct mei_device *dev) mutex_lock(&dev->device_lock); - mei_wd_stop(dev); - dev->dev_state = MEI_DEV_POWER_DOWN; mei_reset(dev); /* move device to disabled state unconditionally */ dev->dev_state = MEI_DEV_DISABLED; mutex_unlock(&dev->device_lock); - - mei_watchdog_unregister(dev); } EXPORT_SYMBOL_GPL(mei_stop); @@ -394,7 +383,6 @@ void mei_device_init(struct mei_device *dev, init_waitqueue_head(&dev->wait_hw_ready); init_waitqueue_head(&dev->wait_pg); init_waitqueue_head(&dev->wait_hbm_start); - init_waitqueue_head(&dev->wait_stop_wd); dev->dev_state = MEI_DEV_INITIALIZING; dev->reset_count = 0; @@ -404,13 +392,11 @@ void mei_device_init(struct mei_device *dev, mei_io_list_init(&dev->ctrl_rd_list); INIT_DELAYED_WORK(&dev->timer_work, mei_timer); - INIT_WORK(&dev->init_work, mei_host_client_init); INIT_WORK(&dev->reset_work, mei_reset_work); + INIT_WORK(&dev->bus_rescan_work, mei_cl_bus_rescan_work); - INIT_LIST_HEAD(&dev->wd_cl.link); INIT_LIST_HEAD(&dev->iamthif_cl.link); mei_io_list_init(&dev->amthif_cmd_list); - mei_io_list_init(&dev->amthif_rd_complete_list); bitmap_zero(dev->host_clients_map, MEI_CLIENTS_MAX); dev->open_handle_count = 0; diff --git a/drivers/misc/mei/interrupt.c b/drivers/misc/mei/interrupt.c index 64b568a..1e5cb1f 100644 --- a/drivers/misc/mei/interrupt.c +++ b/drivers/misc/mei/interrupt.c @@ -48,7 +48,7 @@ void mei_irq_compl_handler(struct mei_device *dev, struct mei_cl_cb *compl_list) dev_dbg(dev->dev, "completing call back.\n"); if (cl == &dev->iamthif_cl) - mei_amthif_complete(dev, cb); + mei_amthif_complete(cl, cb); else mei_cl_complete(cl, cb); } @@ -104,6 +104,7 @@ int mei_cl_irq_read_msg(struct mei_cl *cl, struct mei_device *dev = cl->dev; struct mei_cl_cb *cb; unsigned char *buffer = NULL; + size_t buf_sz; cb = list_first_entry_or_null(&cl->rd_pending, struct mei_cl_cb, list); if (!cb) { @@ -124,11 +125,21 @@ int mei_cl_irq_read_msg(struct mei_cl *cl, goto out; } - if (cb->buf.size < mei_hdr->length + cb->buf_idx) { - cl_dbg(dev, cl, "message overflow. size %d len %d idx %ld\n", + buf_sz = mei_hdr->length + cb->buf_idx; + /* catch for integer overflow */ + if (buf_sz < cb->buf_idx) { + cl_err(dev, cl, "message is too big len %d idx %zu\n", + mei_hdr->length, cb->buf_idx); + + list_move_tail(&cb->list, &complete_list->list); + cb->status = -EMSGSIZE; + goto out; + } + + if (cb->buf.size < buf_sz) { + cl_dbg(dev, cl, "message overflow. size %zu len %d idx %zu\n", cb->buf.size, mei_hdr->length, cb->buf_idx); - buffer = krealloc(cb->buf.data, mei_hdr->length + cb->buf_idx, - GFP_KERNEL); + buffer = krealloc(cb->buf.data, buf_sz, GFP_KERNEL); if (!buffer) { cb->status = -ENOMEM; @@ -136,7 +147,7 @@ int mei_cl_irq_read_msg(struct mei_cl *cl, goto out; } cb->buf.data = buffer; - cb->buf.size = mei_hdr->length + cb->buf_idx; + cb->buf.size = buf_sz; } buffer = cb->buf.data + cb->buf_idx; @@ -145,8 +156,7 @@ int mei_cl_irq_read_msg(struct mei_cl *cl, cb->buf_idx += mei_hdr->length; if (mei_hdr->msg_complete) { - cb->read_time = jiffies; - cl_dbg(dev, cl, "completed read length = %lu\n", cb->buf_idx); + cl_dbg(dev, cl, "completed read length = %zu\n", cb->buf_idx); list_move_tail(&cb->list, &complete_list->list); } else { pm_runtime_mark_last_busy(dev->dev); @@ -229,6 +239,16 @@ static int mei_cl_irq_read(struct mei_cl *cl, struct mei_cl_cb *cb, return 0; } +static inline bool hdr_is_hbm(struct mei_msg_hdr *mei_hdr) +{ + return mei_hdr->host_addr == 0 && mei_hdr->me_addr == 0; +} + +static inline bool hdr_is_fixed(struct mei_msg_hdr *mei_hdr) +{ + return mei_hdr->host_addr == 0 && mei_hdr->me_addr != 0; +} + /** * mei_irq_read_handler - bottom half read routine after ISR to * handle the read processing. @@ -270,7 +290,7 @@ int mei_irq_read_handler(struct mei_device *dev, } /* HBM message */ - if (mei_hdr->host_addr == 0 && mei_hdr->me_addr == 0) { + if (hdr_is_hbm(mei_hdr)) { ret = mei_hbm_dispatch(dev, mei_hdr); if (ret) { dev_dbg(dev->dev, "mei_hbm_dispatch failed ret = %d\n", @@ -290,6 +310,14 @@ int mei_irq_read_handler(struct mei_device *dev, /* if no recipient cl was found we assume corrupted header */ if (&cl->link == &dev->file_list) { + /* A message for not connected fixed address clients + * should be silently discarded + */ + if (hdr_is_fixed(mei_hdr)) { + mei_irq_discard_msg(dev, mei_hdr); + ret = 0; + goto reset_slots; + } dev_err(dev->dev, "no destination client found 0x%08X\n", dev->rd_msg_hdr); ret = -EBADMSG; @@ -360,21 +388,6 @@ int mei_irq_write_handler(struct mei_device *dev, struct mei_cl_cb *cmpl_list) list_move_tail(&cb->list, &cmpl_list->list); } - if (dev->wd_state == MEI_WD_STOPPING) { - dev->wd_state = MEI_WD_IDLE; - wake_up(&dev->wait_stop_wd); - } - - if (mei_cl_is_connected(&dev->wd_cl)) { - if (dev->wd_pending && - mei_cl_flow_ctrl_creds(&dev->wd_cl) > 0) { - ret = mei_wd_send(dev); - if (ret) - return ret; - dev->wd_pending = false; - } - } - /* complete control write list CB */ dev_dbg(dev->dev, "complete control write list cb.\n"); list_for_each_entry_safe(cb, next, &dev->ctrl_wr_list.list, list) { @@ -462,7 +475,6 @@ static void mei_connect_timeout(struct mei_cl *cl) */ void mei_timer(struct work_struct *work) { - unsigned long timeout; struct mei_cl *cl; struct mei_device *dev = container_of(work, @@ -508,45 +520,15 @@ void mei_timer(struct work_struct *work) mei_reset(dev); dev->iamthif_canceled = false; dev->iamthif_state = MEI_IAMTHIF_IDLE; - dev->iamthif_timer = 0; mei_io_cb_free(dev->iamthif_current_cb); dev->iamthif_current_cb = NULL; - dev->iamthif_file_object = NULL; + dev->iamthif_fp = NULL; mei_amthif_run_next_cmd(dev); } } - if (dev->iamthif_timer) { - - timeout = dev->iamthif_timer + - mei_secs_to_jiffies(MEI_IAMTHIF_READ_TIMER); - - dev_dbg(dev->dev, "dev->iamthif_timer = %ld\n", - dev->iamthif_timer); - dev_dbg(dev->dev, "timeout = %ld\n", timeout); - dev_dbg(dev->dev, "jiffies = %ld\n", jiffies); - if (time_after(jiffies, timeout)) { - /* - * User didn't read the AMTHI data on time (15sec) - * freeing AMTHI for other requests - */ - - dev_dbg(dev->dev, "freeing AMTHI for other requests\n"); - - mei_io_list_flush(&dev->amthif_rd_complete_list, - &dev->iamthif_cl); - mei_io_cb_free(dev->iamthif_current_cb); - dev->iamthif_current_cb = NULL; - - dev->iamthif_file_object->private_data = NULL; - dev->iamthif_file_object = NULL; - dev->iamthif_timer = 0; - mei_amthif_run_next_cmd(dev); - - } - } out: if (dev->dev_state != MEI_DEV_DISABLED) schedule_delayed_work(&dev->timer_work, 2 * HZ); diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c index 80f9afc..52635b0 100644 --- a/drivers/misc/mei/main.c +++ b/drivers/misc/mei/main.c @@ -65,7 +65,7 @@ static int mei_open(struct inode *inode, struct file *file) goto err_unlock; } - cl = mei_cl_alloc_linked(dev, MEI_HOST_CLIENT_ID_ANY); + cl = mei_cl_alloc_linked(dev); if (IS_ERR(cl)) { err = PTR_ERR(cl); goto err_unlock; @@ -159,27 +159,22 @@ static ssize_t mei_read(struct file *file, char __user *ubuf, goto out; } + if (ubuf == NULL) { + rets = -EMSGSIZE; + goto out; + } + if (cl == &dev->iamthif_cl) { rets = mei_amthif_read(dev, file, ubuf, length, offset); goto out; } cb = mei_cl_read_cb(cl, file); - if (cb) { - /* read what left */ - if (cb->buf_idx > *offset) - goto copy_buffer; - /* offset is beyond buf_idx we have no more data return 0 */ - if (cb->buf_idx > 0 && cb->buf_idx <= *offset) { - rets = 0; - goto free; - } - /* Offset needs to be cleaned for contiguous reads*/ - if (cb->buf_idx == 0 && *offset > 0) - *offset = 0; - } else if (*offset > 0) { + if (cb) + goto copy_buffer; + + if (*offset > 0) *offset = 0; - } err = mei_cl_read_start(cl, length, file); if (err && err != -EBUSY) { @@ -214,11 +209,6 @@ static ssize_t mei_read(struct file *file, char __user *ubuf, cb = mei_cl_read_cb(cl, file); if (!cb) { - if (mei_cl_is_fixed_address(cl) && dev->allow_fixed_address) { - cb = mei_cl_read_cb(cl, NULL); - if (cb) - goto copy_buffer; - } rets = 0; goto out; } @@ -231,10 +221,10 @@ copy_buffer: goto free; } - cl_dbg(dev, cl, "buf.size = %d buf.idx = %ld\n", - cb->buf.size, cb->buf_idx); - if (length == 0 || ubuf == NULL || *offset > cb->buf_idx) { - rets = -EMSGSIZE; + cl_dbg(dev, cl, "buf.size = %zu buf.idx = %zu offset = %lld\n", + cb->buf.size, cb->buf_idx, *offset); + if (*offset >= cb->buf_idx) { + rets = 0; goto free; } @@ -250,11 +240,13 @@ copy_buffer: rets = length; *offset += length; - if ((unsigned long)*offset < cb->buf_idx) + /* not all data was read, keep the cb */ + if (*offset < cb->buf_idx) goto out; free: mei_io_cb_free(cb); + *offset = 0; out: cl_dbg(dev, cl, "end mei read rets = %d\n", rets); @@ -275,9 +267,8 @@ static ssize_t mei_write(struct file *file, const char __user *ubuf, size_t length, loff_t *offset) { struct mei_cl *cl = file->private_data; - struct mei_cl_cb *write_cb = NULL; + struct mei_cl_cb *cb; struct mei_device *dev; - unsigned long timeout = 0; int rets; if (WARN_ON(!cl || !cl->dev)) @@ -313,52 +304,31 @@ static ssize_t mei_write(struct file *file, const char __user *ubuf, goto out; } - if (cl == &dev->iamthif_cl) { - write_cb = mei_amthif_find_read_list_entry(dev, file); - - if (write_cb) { - timeout = write_cb->read_time + - mei_secs_to_jiffies(MEI_IAMTHIF_READ_TIMER); - - if (time_after(jiffies, timeout)) { - *offset = 0; - mei_io_cb_free(write_cb); - write_cb = NULL; - } - } - } - *offset = 0; - write_cb = mei_cl_alloc_cb(cl, length, MEI_FOP_WRITE, file); - if (!write_cb) { + cb = mei_cl_alloc_cb(cl, length, MEI_FOP_WRITE, file); + if (!cb) { rets = -ENOMEM; goto out; } - rets = copy_from_user(write_cb->buf.data, ubuf, length); + rets = copy_from_user(cb->buf.data, ubuf, length); if (rets) { dev_dbg(dev->dev, "failed to copy data from userland\n"); rets = -EFAULT; + mei_io_cb_free(cb); goto out; } if (cl == &dev->iamthif_cl) { - rets = mei_amthif_write(cl, write_cb); - - if (rets) { - dev_err(dev->dev, - "amthif write failed with status = %d\n", rets); - goto out; - } - mutex_unlock(&dev->device_lock); - return length; + rets = mei_amthif_write(cl, cb); + if (!rets) + rets = length; + goto out; } - rets = mei_cl_write(cl, write_cb, false); + rets = mei_cl_write(cl, cb, false); out: mutex_unlock(&dev->device_lock); - if (rets < 0) - mei_io_cb_free(write_cb); return rets; } @@ -393,12 +363,22 @@ static int mei_ioctl_connect_client(struct file *file, /* find ME client we're trying to connect to */ me_cl = mei_me_cl_by_uuid(dev, &data->in_client_uuid); - if (!me_cl || - (me_cl->props.fixed_address && !dev->allow_fixed_address)) { + if (!me_cl) { dev_dbg(dev->dev, "Cannot connect to FW Client UUID = %pUl\n", &data->in_client_uuid); - mei_me_cl_put(me_cl); - return -ENOTTY; + rets = -ENOTTY; + goto end; + } + + if (me_cl->props.fixed_address) { + bool forbidden = dev->override_fixed_address ? + !dev->allow_fixed_address : !dev->hbm_f_fa_supported; + if (forbidden) { + dev_dbg(dev->dev, "Connection forbidden to FW Client UUID = %pUl\n", + &data->in_client_uuid); + rets = -ENOTTY; + goto end; + } } dev_dbg(dev->dev, "Connect to FW Client ID = %d\n", @@ -454,7 +434,7 @@ end: * * Return: 0 on success , <0 on error */ -static int mei_ioctl_client_notify_request(struct file *file, u32 request) +static int mei_ioctl_client_notify_request(const struct file *file, u32 request) { struct mei_cl *cl = file->private_data; @@ -473,7 +453,7 @@ static int mei_ioctl_client_notify_request(struct file *file, u32 request) * * Return: 0 on success , <0 on error */ -static int mei_ioctl_client_notify_get(struct file *file, u32 *notify_get) +static int mei_ioctl_client_notify_get(const struct file *file, u32 *notify_get) { struct mei_cl *cl = file->private_data; bool notify_ev; diff --git a/drivers/misc/mei/mei-trace.c b/drivers/misc/mei/mei-trace.c index 388efb5..e19e6ac 100644 --- a/drivers/misc/mei/mei-trace.c +++ b/drivers/misc/mei/mei-trace.c @@ -22,4 +22,6 @@ EXPORT_TRACEPOINT_SYMBOL(mei_reg_read); EXPORT_TRACEPOINT_SYMBOL(mei_reg_write); +EXPORT_TRACEPOINT_SYMBOL(mei_pci_cfg_read); +EXPORT_TRACEPOINT_SYMBOL(mei_pci_cfg_write); #endif /* __CHECKER__ */ diff --git a/drivers/misc/mei/mei-trace.h b/drivers/misc/mei/mei-trace.h index 47e1bc6..7d2d5d4 100644 --- a/drivers/misc/mei/mei-trace.h +++ b/drivers/misc/mei/mei-trace.h @@ -60,7 +60,45 @@ TRACE_EVENT(mei_reg_write, __entry->offs = offs; __entry->val = val; ), - TP_printk("[%s] write %s[%#x] = %#x)", + TP_printk("[%s] write %s[%#x] = %#x", + __get_str(dev), __entry->reg, __entry->offs, __entry->val) +); + +TRACE_EVENT(mei_pci_cfg_read, + TP_PROTO(const struct device *dev, const char *reg, u32 offs, u32 val), + TP_ARGS(dev, reg, offs, val), + TP_STRUCT__entry( + __string(dev, dev_name(dev)) + __field(const char *, reg) + __field(u32, offs) + __field(u32, val) + ), + TP_fast_assign( + __assign_str(dev, dev_name(dev)) + __entry->reg = reg; + __entry->offs = offs; + __entry->val = val; + ), + TP_printk("[%s] pci cfg read %s:[%#x] = %#x", + __get_str(dev), __entry->reg, __entry->offs, __entry->val) +); + +TRACE_EVENT(mei_pci_cfg_write, + TP_PROTO(const struct device *dev, const char *reg, u32 offs, u32 val), + TP_ARGS(dev, reg, offs, val), + TP_STRUCT__entry( + __string(dev, dev_name(dev)) + __field(const char *, reg) + __field(u32, offs) + __field(u32, val) + ), + TP_fast_assign( + __assign_str(dev, dev_name(dev)) + __entry->reg = reg; + __entry->offs = offs; + __entry->val = val; + ), + TP_printk("[%s] pci cfg write %s[%#x] = %#x", __get_str(dev), __entry->reg, __entry->offs, __entry->val) ); diff --git a/drivers/misc/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h index 4250555..db78e6d 100644 --- a/drivers/misc/mei/mei_dev.h +++ b/drivers/misc/mei/mei_dev.h @@ -18,7 +18,7 @@ #define _MEI_DEV_H_ #include <linux/types.h> -#include <linux/watchdog.h> +#include <linux/cdev.h> #include <linux/poll.h> #include <linux/mei.h> #include <linux/mei_cl_bus.h> @@ -26,33 +26,13 @@ #include "hw.h" #include "hbm.h" -/* - * watch dog definition - */ -#define MEI_WD_HDR_SIZE 4 -#define MEI_WD_STOP_MSG_SIZE MEI_WD_HDR_SIZE -#define MEI_WD_START_MSG_SIZE (MEI_WD_HDR_SIZE + 16) - -#define MEI_WD_DEFAULT_TIMEOUT 120 /* seconds */ -#define MEI_WD_MIN_TIMEOUT 120 /* seconds */ -#define MEI_WD_MAX_TIMEOUT 65535 /* seconds */ - -#define MEI_WD_STOP_TIMEOUT 10 /* msecs */ - -#define MEI_WD_STATE_INDEPENDENCE_MSG_SENT (1 << 0) - -#define MEI_RD_MSG_BUF_SIZE (128 * sizeof(u32)) - /* * AMTHI Client UUID */ extern const uuid_le mei_amthif_guid; -/* - * Watchdog Client UUID - */ -extern const uuid_le mei_wd_guid; +#define MEI_RD_MSG_BUF_SIZE (128 * sizeof(u32)) /* * Number of Maximum MEI Clients @@ -73,15 +53,6 @@ extern const uuid_le mei_wd_guid; */ #define MEI_MAX_OPEN_HANDLE_COUNT (MEI_CLIENTS_MAX - 1) -/* - * Internal Clients Number - */ -#define MEI_HOST_CLIENT_ID_ANY (-1) -#define MEI_HBM_HOST_CLIENT_ID 0 /* not used, just for documentation */ -#define MEI_WD_HOST_CLIENT_ID 1 -#define MEI_IAMTHIF_HOST_CLIENT_ID 2 - - /* File state */ enum file_state { MEI_FILE_INITIALIZING = 0, @@ -123,12 +94,6 @@ enum mei_file_transaction_states { MEI_READ_COMPLETE }; -enum mei_wd_states { - MEI_WD_IDLE, - MEI_WD_RUNNING, - MEI_WD_STOPPING, -}; - /** * enum mei_cb_file_ops - file operation associated with the callback * @MEI_FOP_READ: read @@ -153,7 +118,7 @@ enum mei_cb_file_ops { * Intel MEI message data struct */ struct mei_msg_data { - u32 size; + size_t size; unsigned char *data; }; @@ -206,8 +171,7 @@ struct mei_cl; * @fop_type: file operation type * @buf: buffer for data associated with the callback * @buf_idx: last read index - * @read_time: last read operation time stamp (iamthif) - * @file_object: pointer to file structure + * @fp: pointer to file structure * @status: io status of the cb * @internal: communication between driver and FW flag * @completed: the transfer or reception has completed @@ -217,9 +181,8 @@ struct mei_cl_cb { struct mei_cl *cl; enum mei_cb_file_ops fop_type; struct mei_msg_data buf; - unsigned long buf_idx; - unsigned long read_time; - struct file *file_object; + size_t buf_idx; + const struct file *fp; int status; u32 internal:1; u32 completed:1; @@ -341,12 +304,13 @@ struct mei_hw_ops { /* MEI bus API*/ void mei_cl_bus_rescan(struct mei_device *bus); +void mei_cl_bus_rescan_work(struct work_struct *work); void mei_cl_bus_dev_fixup(struct mei_cl_device *dev); ssize_t __mei_cl_send(struct mei_cl *cl, u8 *buf, size_t length, bool blocking); ssize_t __mei_cl_recv(struct mei_cl *cl, u8 *buf, size_t length); -void mei_cl_bus_rx_event(struct mei_cl *cl); -void mei_cl_bus_notify_event(struct mei_cl *cl); +bool mei_cl_bus_rx_event(struct mei_cl *cl); +bool mei_cl_bus_notify_event(struct mei_cl *cl); void mei_cl_bus_remove_devices(struct mei_device *bus); int mei_cl_bus_init(void); void mei_cl_bus_exit(void); @@ -404,7 +368,6 @@ const char *mei_pg_state_str(enum mei_pg_state state); * @wait_hw_ready : wait queue for receive HW ready message form FW * @wait_pg : wait queue for receive PG message from FW * @wait_hbm_start : wait queue for receive HBM start message from FW - * @wait_stop_wd : wait queue for receive WD stop message from FW * * @reset_count : number of consecutive resets * @dev_state : device state @@ -426,6 +389,8 @@ const char *mei_pg_state_str(enum mei_pg_state state); * @hbm_f_dc_supported : hbm feature dynamic clients * @hbm_f_dot_supported : hbm feature disconnect on timeout * @hbm_f_ev_supported : hbm feature event notification + * @hbm_f_fa_supported : hbm feature fixed address client + * @hbm_f_ie_supported : hbm feature immediate reply to enum request * * @me_clients_rwsem: rw lock over me_clients list * @me_clients : list of FW clients @@ -434,26 +399,19 @@ const char *mei_pg_state_str(enum mei_pg_state state); * @me_client_index : last FW client index in enumeration * * @allow_fixed_address: allow user space to connect a fixed client - * - * @wd_cl : watchdog client - * @wd_state : watchdog client state - * @wd_pending : watchdog command is pending - * @wd_timeout : watchdog expiration timeout - * @wd_data : watchdog message buffer + * @override_fixed_address: force allow fixed address behavior * * @amthif_cmd_list : amthif list for cmd waiting - * @amthif_rd_complete_list : amthif list for reading completed cmd data - * @iamthif_file_object : file for current amthif operation + * @iamthif_fp : file for current amthif operation * @iamthif_cl : amthif host client * @iamthif_current_cb : amthif current operation callback * @iamthif_open_count : number of opened amthif connections - * @iamthif_timer : time stamp of current amthif command completion * @iamthif_stall_timer : timer to detect amthif hang * @iamthif_state : amthif processor state * @iamthif_canceled : current amthif command is canceled * - * @init_work : work item for the device init * @reset_work : work item for the device reset + * @bus_rescan_work : work item for the bus rescan * * @device_list : mei client bus list * @cl_bus_lock : client bus list lock @@ -486,7 +444,6 @@ struct mei_device { wait_queue_head_t wait_hw_ready; wait_queue_head_t wait_pg; wait_queue_head_t wait_hbm_start; - wait_queue_head_t wait_stop_wd; /* * mei device states @@ -522,6 +479,8 @@ struct mei_device { unsigned int hbm_f_dc_supported:1; unsigned int hbm_f_dot_supported:1; unsigned int hbm_f_ev_supported:1; + unsigned int hbm_f_fa_supported:1; + unsigned int hbm_f_ie_supported:1; struct rw_semaphore me_clients_rwsem; struct list_head me_clients; @@ -530,29 +489,21 @@ struct mei_device { unsigned long me_client_index; bool allow_fixed_address; - - struct mei_cl wd_cl; - enum mei_wd_states wd_state; - bool wd_pending; - u16 wd_timeout; - unsigned char wd_data[MEI_WD_START_MSG_SIZE]; - + bool override_fixed_address; /* amthif list for cmd waiting */ struct mei_cl_cb amthif_cmd_list; /* driver managed amthif list for reading completed amthif cmd data */ - struct mei_cl_cb amthif_rd_complete_list; - struct file *iamthif_file_object; + const struct file *iamthif_fp; struct mei_cl iamthif_cl; struct mei_cl_cb *iamthif_current_cb; long iamthif_open_count; - unsigned long iamthif_timer; u32 iamthif_stall_timer; enum iamthif_states iamthif_state; bool iamthif_canceled; - struct work_struct init_work; struct work_struct reset_work; + struct work_struct bus_rescan_work; /* List of bus devices */ struct list_head device_list; @@ -635,47 +586,18 @@ unsigned int mei_amthif_poll(struct mei_device *dev, int mei_amthif_release(struct mei_device *dev, struct file *file); -struct mei_cl_cb *mei_amthif_find_read_list_entry(struct mei_device *dev, - struct file *file); - int mei_amthif_write(struct mei_cl *cl, struct mei_cl_cb *cb); int mei_amthif_run_next_cmd(struct mei_device *dev); int mei_amthif_irq_write(struct mei_cl *cl, struct mei_cl_cb *cb, struct mei_cl_cb *cmpl_list); -void mei_amthif_complete(struct mei_device *dev, struct mei_cl_cb *cb); +void mei_amthif_complete(struct mei_cl *cl, struct mei_cl_cb *cb); int mei_amthif_irq_read_msg(struct mei_cl *cl, struct mei_msg_hdr *mei_hdr, struct mei_cl_cb *complete_list); int mei_amthif_irq_read(struct mei_device *dev, s32 *slots); /* - * NFC functions - */ -int mei_nfc_host_init(struct mei_device *dev, struct mei_me_client *me_cl); -void mei_nfc_host_exit(struct mei_device *dev); - -/* - * NFC Client UUID - */ -extern const uuid_le mei_nfc_guid; - -int mei_wd_send(struct mei_device *dev); -int mei_wd_stop(struct mei_device *dev); -int mei_wd_host_init(struct mei_device *dev, struct mei_me_client *me_cl); -/* - * mei_watchdog_register - Registering watchdog interface - * once we got connection to the WD Client - * @dev: mei device - */ -int mei_watchdog_register(struct mei_device *dev); -/* - * mei_watchdog_unregister - Unregistering watchdog interface - * @dev: mei device - */ -void mei_watchdog_unregister(struct mei_device *dev); - -/* * Register Access Function */ diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c index 75fc9c6..64e64da 100644 --- a/drivers/misc/mei/pci-me.c +++ b/drivers/misc/mei/pci-me.c @@ -88,6 +88,9 @@ static const struct pci_device_id mei_me_pci_tbl[] = { {MEI_PCI_DEVICE(MEI_DEV_ID_SPT_H, mei_me_pch8_cfg)}, {MEI_PCI_DEVICE(MEI_DEV_ID_SPT_H_2, mei_me_pch8_cfg)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_BXT_M, mei_me_pch8_cfg)}, + {MEI_PCI_DEVICE(MEI_DEV_ID_APL_I, mei_me_pch8_cfg)}, + /* required last entry */ {0, } }; @@ -210,7 +213,7 @@ static int mei_me_probe(struct pci_dev *pdev, const struct pci_device_id *ent) err = mei_register(dev, &pdev->dev); if (err) - goto release_irq; + goto stop; pci_set_drvdata(pdev, dev); @@ -231,6 +234,8 @@ static int mei_me_probe(struct pci_dev *pdev, const struct pci_device_id *ent) return 0; +stop: + mei_stop(dev); release_irq: mei_cancel_work(dev); mei_disable_interrupts(dev); diff --git a/drivers/misc/mei/pci-txe.c b/drivers/misc/mei/pci-txe.c index 71f8a74..30cc306 100644 --- a/drivers/misc/mei/pci-txe.c +++ b/drivers/misc/mei/pci-txe.c @@ -154,7 +154,7 @@ static int mei_txe_probe(struct pci_dev *pdev, const struct pci_device_id *ent) err = mei_register(dev, &pdev->dev); if (err) - goto release_irq; + goto stop; pci_set_drvdata(pdev, dev); @@ -170,6 +170,8 @@ static int mei_txe_probe(struct pci_dev *pdev, const struct pci_device_id *ent) return 0; +stop: + mei_stop(dev); release_irq: mei_cancel_work(dev); diff --git a/drivers/misc/mei/wd.c b/drivers/misc/mei/wd.c deleted file mode 100644 index b346638..0000000 --- a/drivers/misc/mei/wd.c +++ /dev/null @@ -1,391 +0,0 @@ -/* - * - * Intel Management Engine Interface (Intel MEI) Linux driver - * Copyright (c) 2003-2012, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - */ -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/device.h> -#include <linux/sched.h> -#include <linux/watchdog.h> - -#include <linux/mei.h> - -#include "mei_dev.h" -#include "hbm.h" -#include "client.h" - -static const u8 mei_start_wd_params[] = { 0x02, 0x12, 0x13, 0x10 }; -static const u8 mei_stop_wd_params[] = { 0x02, 0x02, 0x14, 0x10 }; - -/* - * AMT Watchdog Device - */ -#define INTEL_AMT_WATCHDOG_ID "INTCAMT" - -/* UUIDs for AMT F/W clients */ -const uuid_le mei_wd_guid = UUID_LE(0x05B79A6F, 0x4628, 0x4D7F, 0x89, - 0x9D, 0xA9, 0x15, 0x14, 0xCB, - 0x32, 0xAB); - -static void mei_wd_set_start_timeout(struct mei_device *dev, u16 timeout) -{ - dev_dbg(dev->dev, "wd: set timeout=%d.\n", timeout); - memcpy(dev->wd_data, mei_start_wd_params, MEI_WD_HDR_SIZE); - memcpy(dev->wd_data + MEI_WD_HDR_SIZE, &timeout, sizeof(u16)); -} - -/** - * mei_wd_host_init - connect to the watchdog client - * - * @dev: the device structure - * @me_cl: me client - * - * Return: -ENOTTY if wd client cannot be found - * -EIO if write has failed - * 0 on success - */ -int mei_wd_host_init(struct mei_device *dev, struct mei_me_client *me_cl) -{ - struct mei_cl *cl = &dev->wd_cl; - int ret; - - mei_cl_init(cl, dev); - - dev->wd_timeout = MEI_WD_DEFAULT_TIMEOUT; - dev->wd_state = MEI_WD_IDLE; - - ret = mei_cl_link(cl, MEI_WD_HOST_CLIENT_ID); - if (ret < 0) { - dev_info(dev->dev, "wd: failed link client\n"); - return ret; - } - - ret = mei_cl_connect(cl, me_cl, NULL); - if (ret) { - dev_err(dev->dev, "wd: failed to connect = %d\n", ret); - mei_cl_unlink(cl); - return ret; - } - - ret = mei_watchdog_register(dev); - if (ret) { - mei_cl_disconnect(cl); - mei_cl_unlink(cl); - } - return ret; -} - -/** - * mei_wd_send - sends watch dog message to fw. - * - * @dev: the device structure - * - * Return: 0 if success, - * -EIO when message send fails - * -EINVAL when invalid message is to be sent - * -ENODEV on flow control failure - */ -int mei_wd_send(struct mei_device *dev) -{ - struct mei_cl *cl = &dev->wd_cl; - struct mei_msg_hdr hdr; - int ret; - - hdr.host_addr = cl->host_client_id; - hdr.me_addr = mei_cl_me_id(cl); - hdr.msg_complete = 1; - hdr.reserved = 0; - hdr.internal = 0; - - if (!memcmp(dev->wd_data, mei_start_wd_params, MEI_WD_HDR_SIZE)) - hdr.length = MEI_WD_START_MSG_SIZE; - else if (!memcmp(dev->wd_data, mei_stop_wd_params, MEI_WD_HDR_SIZE)) - hdr.length = MEI_WD_STOP_MSG_SIZE; - else { - dev_err(dev->dev, "wd: invalid message is to be sent, aborting\n"); - return -EINVAL; - } - - ret = mei_write_message(dev, &hdr, dev->wd_data); - if (ret) { - dev_err(dev->dev, "wd: write message failed\n"); - return ret; - } - - ret = mei_cl_flow_ctrl_reduce(cl); - if (ret) { - dev_err(dev->dev, "wd: flow_ctrl_reduce failed.\n"); - return ret; - } - - return 0; -} - -/** - * mei_wd_stop - sends watchdog stop message to fw. - * - * @dev: the device structure - * - * Return: 0 if success - * on error: - * -EIO when message send fails - * -EINVAL when invalid message is to be sent - * -ETIME on message timeout - */ -int mei_wd_stop(struct mei_device *dev) -{ - struct mei_cl *cl = &dev->wd_cl; - int ret; - - if (!mei_cl_is_connected(cl) || - dev->wd_state != MEI_WD_RUNNING) - return 0; - - memcpy(dev->wd_data, mei_stop_wd_params, MEI_WD_STOP_MSG_SIZE); - - dev->wd_state = MEI_WD_STOPPING; - - ret = mei_cl_flow_ctrl_creds(cl); - if (ret < 0) - goto err; - - if (ret && mei_hbuf_acquire(dev)) { - ret = mei_wd_send(dev); - if (ret) - goto err; - dev->wd_pending = false; - } else { - dev->wd_pending = true; - } - - mutex_unlock(&dev->device_lock); - - ret = wait_event_timeout(dev->wait_stop_wd, - dev->wd_state == MEI_WD_IDLE, - msecs_to_jiffies(MEI_WD_STOP_TIMEOUT)); - mutex_lock(&dev->device_lock); - if (dev->wd_state != MEI_WD_IDLE) { - /* timeout */ - ret = -ETIME; - dev_warn(dev->dev, "wd: stop failed to complete ret=%d\n", ret); - goto err; - } - dev_dbg(dev->dev, "wd: stop completed after %u msec\n", - MEI_WD_STOP_TIMEOUT - jiffies_to_msecs(ret)); - return 0; -err: - return ret; -} - -/** - * mei_wd_ops_start - wd start command from the watchdog core. - * - * @wd_dev: watchdog device struct - * - * Return: 0 if success, negative errno code for failure - */ -static int mei_wd_ops_start(struct watchdog_device *wd_dev) -{ - struct mei_device *dev; - struct mei_cl *cl; - int err = -ENODEV; - - dev = watchdog_get_drvdata(wd_dev); - if (!dev) - return -ENODEV; - - cl = &dev->wd_cl; - - mutex_lock(&dev->device_lock); - - if (dev->dev_state != MEI_DEV_ENABLED) { - dev_dbg(dev->dev, "wd: dev_state != MEI_DEV_ENABLED dev_state = %s\n", - mei_dev_state_str(dev->dev_state)); - goto end_unlock; - } - - if (!mei_cl_is_connected(cl)) { - cl_dbg(dev, cl, "MEI Driver is not connected to Watchdog Client\n"); - goto end_unlock; - } - - mei_wd_set_start_timeout(dev, dev->wd_timeout); - - err = 0; -end_unlock: - mutex_unlock(&dev->device_lock); - return err; -} - -/** - * mei_wd_ops_stop - wd stop command from the watchdog core. - * - * @wd_dev: watchdog device struct - * - * Return: 0 if success, negative errno code for failure - */ -static int mei_wd_ops_stop(struct watchdog_device *wd_dev) -{ - struct mei_device *dev; - - dev = watchdog_get_drvdata(wd_dev); - if (!dev) - return -ENODEV; - - mutex_lock(&dev->device_lock); - mei_wd_stop(dev); - mutex_unlock(&dev->device_lock); - - return 0; -} - -/** - * mei_wd_ops_ping - wd ping command from the watchdog core. - * - * @wd_dev: watchdog device struct - * - * Return: 0 if success, negative errno code for failure - */ -static int mei_wd_ops_ping(struct watchdog_device *wd_dev) -{ - struct mei_device *dev; - struct mei_cl *cl; - int ret; - - dev = watchdog_get_drvdata(wd_dev); - if (!dev) - return -ENODEV; - - cl = &dev->wd_cl; - - mutex_lock(&dev->device_lock); - - if (!mei_cl_is_connected(cl)) { - cl_err(dev, cl, "wd: not connected.\n"); - ret = -ENODEV; - goto end; - } - - dev->wd_state = MEI_WD_RUNNING; - - ret = mei_cl_flow_ctrl_creds(cl); - if (ret < 0) - goto end; - - /* Check if we can send the ping to HW*/ - if (ret && mei_hbuf_acquire(dev)) { - dev_dbg(dev->dev, "wd: sending ping\n"); - - ret = mei_wd_send(dev); - if (ret) - goto end; - dev->wd_pending = false; - } else { - dev->wd_pending = true; - } - -end: - mutex_unlock(&dev->device_lock); - return ret; -} - -/** - * mei_wd_ops_set_timeout - wd set timeout command from the watchdog core. - * - * @wd_dev: watchdog device struct - * @timeout: timeout value to set - * - * Return: 0 if success, negative errno code for failure - */ -static int mei_wd_ops_set_timeout(struct watchdog_device *wd_dev, - unsigned int timeout) -{ - struct mei_device *dev; - - dev = watchdog_get_drvdata(wd_dev); - if (!dev) - return -ENODEV; - - /* Check Timeout value */ - if (timeout < MEI_WD_MIN_TIMEOUT || timeout > MEI_WD_MAX_TIMEOUT) - return -EINVAL; - - mutex_lock(&dev->device_lock); - - dev->wd_timeout = timeout; - wd_dev->timeout = timeout; - mei_wd_set_start_timeout(dev, dev->wd_timeout); - - mutex_unlock(&dev->device_lock); - - return 0; -} - -/* - * Watchdog Device structs - */ -static const struct watchdog_ops wd_ops = { - .owner = THIS_MODULE, - .start = mei_wd_ops_start, - .stop = mei_wd_ops_stop, - .ping = mei_wd_ops_ping, - .set_timeout = mei_wd_ops_set_timeout, -}; -static const struct watchdog_info wd_info = { - .identity = INTEL_AMT_WATCHDOG_ID, - .options = WDIOF_KEEPALIVEPING | - WDIOF_SETTIMEOUT | - WDIOF_ALARMONLY, -}; - -static struct watchdog_device amt_wd_dev = { - .info = &wd_info, - .ops = &wd_ops, - .timeout = MEI_WD_DEFAULT_TIMEOUT, - .min_timeout = MEI_WD_MIN_TIMEOUT, - .max_timeout = MEI_WD_MAX_TIMEOUT, -}; - - -int mei_watchdog_register(struct mei_device *dev) -{ - - int ret; - - amt_wd_dev.parent = dev->dev; - /* unlock to perserve correct locking order */ - mutex_unlock(&dev->device_lock); - ret = watchdog_register_device(&amt_wd_dev); - mutex_lock(&dev->device_lock); - if (ret) { - dev_err(dev->dev, "wd: unable to register watchdog device = %d.\n", - ret); - return ret; - } - - dev_dbg(dev->dev, "wd: successfully register watchdog interface.\n"); - watchdog_set_drvdata(&amt_wd_dev, dev); - return 0; -} - -void mei_watchdog_unregister(struct mei_device *dev) -{ - if (watchdog_get_drvdata(&amt_wd_dev) == NULL) - return; - - watchdog_set_drvdata(&amt_wd_dev, NULL); - watchdog_unregister_device(&amt_wd_dev); -} - diff --git a/drivers/misc/mic/Kconfig b/drivers/misc/mic/Kconfig index 40677df..2e4f3ba 100644 --- a/drivers/misc/mic/Kconfig +++ b/drivers/misc/mic/Kconfig @@ -32,12 +32,29 @@ config SCIF_BUS OS and tools for MIC to use with this driver are available from <http://software.intel.com/en-us/mic-developer>. +comment "VOP Bus Driver" + +config VOP_BUS + tristate "VOP Bus Driver" + depends on 64BIT && PCI && X86 && X86_DEV_DMA_OPS + help + This option is selected by any driver which registers a + device or driver on the VOP Bus, such as CONFIG_INTEL_MIC_HOST + and CONFIG_INTEL_MIC_CARD. + + If you are building a host/card kernel with an Intel MIC device + then say M (recommended) or Y, else say N. If unsure say N. + + More information about the Intel MIC family as well as the Linux + OS and tools for MIC to use with this driver are available from + <http://software.intel.com/en-us/mic-developer>. + comment "Intel MIC Host Driver" config INTEL_MIC_HOST tristate "Intel MIC Host Driver" - depends on 64BIT && PCI && X86 && INTEL_MIC_BUS && SCIF_BUS && MIC_COSM - select VHOST_RING + depends on 64BIT && PCI && X86 + depends on INTEL_MIC_BUS && SCIF_BUS && MIC_COSM && VOP_BUS help This enables Host Driver support for the Intel Many Integrated Core (MIC) family of PCIe form factor coprocessor devices that @@ -56,7 +73,8 @@ comment "Intel MIC Card Driver" config INTEL_MIC_CARD tristate "Intel MIC Card Driver" - depends on 64BIT && X86 && INTEL_MIC_BUS && SCIF_BUS && MIC_COSM + depends on 64BIT && X86 + depends on INTEL_MIC_BUS && SCIF_BUS && MIC_COSM && VOP_BUS select VIRTIO help This enables card driver support for the Intel Many Integrated @@ -107,3 +125,23 @@ config MIC_COSM More information about the Intel MIC family as well as the Linux OS and tools for MIC to use with this driver are available from <http://software.intel.com/en-us/mic-developer>. + +comment "VOP Driver" + +config VOP + tristate "VOP Driver" + depends on 64BIT && PCI && X86 && VOP_BUS + select VHOST_RING + help + This enables VOP (Virtio over PCIe) Driver support for the Intel + Many Integrated Core (MIC) family of PCIe form factor coprocessor + devices. The VOP driver allows virtio drivers, e.g. net, console + and block drivers, on the card connect to user space virtio + devices on the host. + + If you are building a host kernel with an Intel MIC device then + say M (recommended) or Y, else say N. If unsure say N. + + More information about the Intel MIC family as well as the Linux + OS and tools for MIC to use with this driver are available from + <http://software.intel.com/en-us/mic-developer>. diff --git a/drivers/misc/mic/Makefile b/drivers/misc/mic/Makefile index e288a11..f2b1323 100644 --- a/drivers/misc/mic/Makefile +++ b/drivers/misc/mic/Makefile @@ -8,3 +8,4 @@ obj-y += bus/ obj-$(CONFIG_SCIF) += scif/ obj-$(CONFIG_MIC_COSM) += cosm/ obj-$(CONFIG_MIC_COSM) += cosm_client/ +obj-$(CONFIG_VOP) += vop/ diff --git a/drivers/misc/mic/bus/Makefile b/drivers/misc/mic/bus/Makefile index 761842b..8758a7d 100644 --- a/drivers/misc/mic/bus/Makefile +++ b/drivers/misc/mic/bus/Makefile @@ -5,3 +5,4 @@ obj-$(CONFIG_INTEL_MIC_BUS) += mic_bus.o obj-$(CONFIG_SCIF_BUS) += scif_bus.o obj-$(CONFIG_MIC_COSM) += cosm_bus.o +obj-$(CONFIG_VOP_BUS) += vop_bus.o diff --git a/drivers/misc/mic/bus/cosm_bus.h b/drivers/misc/mic/bus/cosm_bus.h index f7c57f2..8b63418 100644 --- a/drivers/misc/mic/bus/cosm_bus.h +++ b/drivers/misc/mic/bus/cosm_bus.h @@ -30,6 +30,7 @@ * @attr_group: Pointer to list of sysfs attribute groups. * @sdev: Device for sysfs entries. * @state: MIC state. + * @prev_state: MIC state previous to MIC_RESETTING * @shutdown_status: MIC status reported by card for shutdown/crashes. * @shutdown_status_int: Internal shutdown status maintained by the driver * @cosm_mutex: Mutex for synchronizing access to data structures. @@ -55,6 +56,7 @@ struct cosm_device { const struct attribute_group **attr_group; struct device *sdev; u8 state; + u8 prev_state; u8 shutdown_status; u8 shutdown_status_int; struct mutex cosm_mutex; diff --git a/drivers/misc/mic/bus/vop_bus.c b/drivers/misc/mic/bus/vop_bus.c new file mode 100644 index 0000000..303da22 --- /dev/null +++ b/drivers/misc/mic/bus/vop_bus.c @@ -0,0 +1,203 @@ +/* + * Intel MIC Platform Software Stack (MPSS) + * + * Copyright(c) 2016 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Intel Virtio Over PCIe (VOP) Bus driver. + */ +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/idr.h> +#include <linux/dma-mapping.h> + +#include "vop_bus.h" + +static ssize_t device_show(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct vop_device *dev = dev_to_vop(d); + + return sprintf(buf, "0x%04x\n", dev->id.device); +} +static DEVICE_ATTR_RO(device); + +static ssize_t vendor_show(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct vop_device *dev = dev_to_vop(d); + + return sprintf(buf, "0x%04x\n", dev->id.vendor); +} +static DEVICE_ATTR_RO(vendor); + +static ssize_t modalias_show(struct device *d, + struct device_attribute *attr, char *buf) +{ + struct vop_device *dev = dev_to_vop(d); + + return sprintf(buf, "vop:d%08Xv%08X\n", + dev->id.device, dev->id.vendor); +} +static DEVICE_ATTR_RO(modalias); + +static struct attribute *vop_dev_attrs[] = { + &dev_attr_device.attr, + &dev_attr_vendor.attr, + &dev_attr_modalias.attr, + NULL, +}; +ATTRIBUTE_GROUPS(vop_dev); + +static inline int vop_id_match(const struct vop_device *dev, + const struct vop_device_id *id) +{ + if (id->device != dev->id.device && id->device != VOP_DEV_ANY_ID) + return 0; + + return id->vendor == VOP_DEV_ANY_ID || id->vendor == dev->id.vendor; +} + +/* + * This looks through all the IDs a driver claims to support. If any of them + * match, we return 1 and the kernel will call vop_dev_probe(). + */ +static int vop_dev_match(struct device *dv, struct device_driver *dr) +{ + unsigned int i; + struct vop_device *dev = dev_to_vop(dv); + const struct vop_device_id *ids; + + ids = drv_to_vop(dr)->id_table; + for (i = 0; ids[i].device; i++) + if (vop_id_match(dev, &ids[i])) + return 1; + return 0; +} + +static int vop_uevent(struct device *dv, struct kobj_uevent_env *env) +{ + struct vop_device *dev = dev_to_vop(dv); + + return add_uevent_var(env, "MODALIAS=vop:d%08Xv%08X", + dev->id.device, dev->id.vendor); +} + +static int vop_dev_probe(struct device *d) +{ + struct vop_device *dev = dev_to_vop(d); + struct vop_driver *drv = drv_to_vop(dev->dev.driver); + + return drv->probe(dev); +} + +static int vop_dev_remove(struct device *d) +{ + struct vop_device *dev = dev_to_vop(d); + struct vop_driver *drv = drv_to_vop(dev->dev.driver); + + drv->remove(dev); + return 0; +} + +static struct bus_type vop_bus = { + .name = "vop_bus", + .match = vop_dev_match, + .dev_groups = vop_dev_groups, + .uevent = vop_uevent, + .probe = vop_dev_probe, + .remove = vop_dev_remove, +}; + +int vop_register_driver(struct vop_driver *driver) +{ + driver->driver.bus = &vop_bus; + return driver_register(&driver->driver); +} +EXPORT_SYMBOL_GPL(vop_register_driver); + +void vop_unregister_driver(struct vop_driver *driver) +{ + driver_unregister(&driver->driver); +} +EXPORT_SYMBOL_GPL(vop_unregister_driver); + +static void vop_release_dev(struct device *d) +{ + put_device(d); +} + +struct vop_device * +vop_register_device(struct device *pdev, int id, + const struct dma_map_ops *dma_ops, + struct vop_hw_ops *hw_ops, u8 dnode, struct mic_mw *aper, + struct dma_chan *chan) +{ + int ret; + struct vop_device *vdev; + + vdev = kzalloc(sizeof(*vdev), GFP_KERNEL); + if (!vdev) + return ERR_PTR(-ENOMEM); + + vdev->dev.parent = pdev; + vdev->id.device = id; + vdev->id.vendor = VOP_DEV_ANY_ID; + vdev->dev.archdata.dma_ops = (struct dma_map_ops *)dma_ops; + vdev->dev.dma_mask = &vdev->dev.coherent_dma_mask; + dma_set_mask(&vdev->dev, DMA_BIT_MASK(64)); + vdev->dev.release = vop_release_dev; + vdev->hw_ops = hw_ops; + vdev->dev.bus = &vop_bus; + vdev->dnode = dnode; + vdev->aper = aper; + vdev->dma_ch = chan; + vdev->index = dnode - 1; + dev_set_name(&vdev->dev, "vop-dev%u", vdev->index); + /* + * device_register() causes the bus infrastructure to look for a + * matching driver. + */ + ret = device_register(&vdev->dev); + if (ret) + goto free_vdev; + return vdev; +free_vdev: + kfree(vdev); + return ERR_PTR(ret); +} +EXPORT_SYMBOL_GPL(vop_register_device); + +void vop_unregister_device(struct vop_device *dev) +{ + device_unregister(&dev->dev); +} +EXPORT_SYMBOL_GPL(vop_unregister_device); + +static int __init vop_init(void) +{ + return bus_register(&vop_bus); +} + +static void __exit vop_exit(void) +{ + bus_unregister(&vop_bus); +} + +core_initcall(vop_init); +module_exit(vop_exit); + +MODULE_AUTHOR("Intel Corporation"); +MODULE_DESCRIPTION("Intel(R) VOP Bus driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/misc/mic/bus/vop_bus.h b/drivers/misc/mic/bus/vop_bus.h new file mode 100644 index 0000000..fff7a86 --- /dev/null +++ b/drivers/misc/mic/bus/vop_bus.h @@ -0,0 +1,140 @@ +/* + * Intel MIC Platform Software Stack (MPSS) + * + * Copyright(c) 2016 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Intel Virtio over PCIe Bus driver. + */ +#ifndef _VOP_BUS_H_ +#define _VOP_BUS_H_ +/* + * Everything a vop driver needs to work with any particular vop + * implementation. + */ +#include <linux/dmaengine.h> +#include <linux/interrupt.h> + +#include "../common/mic_dev.h" + +struct vop_device_id { + u32 device; + u32 vendor; +}; + +#define VOP_DEV_TRNSP 1 +#define VOP_DEV_ANY_ID 0xffffffff +/* + * Size of the internal buffer used during DMA's as an intermediate buffer + * for copy to/from user. Must be an integral number of pages. + */ +#define VOP_INT_DMA_BUF_SIZE PAGE_ALIGN(64 * 1024ULL) + +/** + * vop_device - representation of a device using vop + * @hw_ops: the hardware ops supported by this device. + * @id: the device type identification (used to match it with a driver). + * @dev: underlying device. + * @dnode - The destination node which this device will communicate with. + * @aper: Aperture memory window + * @dma_ch - DMA channel + * @index: unique position on the vop bus + */ +struct vop_device { + struct vop_hw_ops *hw_ops; + struct vop_device_id id; + struct device dev; + u8 dnode; + struct mic_mw *aper; + struct dma_chan *dma_ch; + int index; +}; + +/** + * vop_driver - operations for a vop I/O driver + * @driver: underlying device driver (populate name and owner). + * @id_table: the ids serviced by this driver. + * @probe: the function to call when a device is found. Returns 0 or -errno. + * @remove: the function to call when a device is removed. + */ +struct vop_driver { + struct device_driver driver; + const struct vop_device_id *id_table; + int (*probe)(struct vop_device *dev); + void (*remove)(struct vop_device *dev); +}; + +/** + * vop_hw_ops - Hardware operations for accessing a VOP device on the VOP bus. + * + * @next_db: Obtain the next available doorbell. + * @request_irq: Request an interrupt on a particular doorbell. + * @free_irq: Free an interrupt requested previously. + * @ack_interrupt: acknowledge an interrupt in the ISR. + * @get_remote_dp: Get access to the virtio device page used by the remote + * node to add/remove/configure virtio devices. + * @get_dp: Get access to the virtio device page used by the self + * node to add/remove/configure virtio devices. + * @send_intr: Send an interrupt to the peer node on a specified doorbell. + * @ioremap: Map a buffer with the specified DMA address and length. + * @iounmap: Unmap a buffer previously mapped. + * @dma_filter: The DMA filter function to use for obtaining access to + * a DMA channel on the peer node. + */ +struct vop_hw_ops { + int (*next_db)(struct vop_device *vpdev); + struct mic_irq *(*request_irq)(struct vop_device *vpdev, + irqreturn_t (*func)(int irq, void *data), + const char *name, void *data, + int intr_src); + void (*free_irq)(struct vop_device *vpdev, + struct mic_irq *cookie, void *data); + void (*ack_interrupt)(struct vop_device *vpdev, int num); + void __iomem * (*get_remote_dp)(struct vop_device *vpdev); + void * (*get_dp)(struct vop_device *vpdev); + void (*send_intr)(struct vop_device *vpdev, int db); + void __iomem * (*ioremap)(struct vop_device *vpdev, + dma_addr_t pa, size_t len); + void (*iounmap)(struct vop_device *vpdev, void __iomem *va); +}; + +struct vop_device * +vop_register_device(struct device *pdev, int id, + const struct dma_map_ops *dma_ops, + struct vop_hw_ops *hw_ops, u8 dnode, struct mic_mw *aper, + struct dma_chan *chan); +void vop_unregister_device(struct vop_device *dev); +int vop_register_driver(struct vop_driver *drv); +void vop_unregister_driver(struct vop_driver *drv); + +/* + * module_vop_driver() - Helper macro for drivers that don't do + * anything special in module init/exit. This eliminates a lot of + * boilerplate. Each module may only use this macro once, and + * calling it replaces module_init() and module_exit() + */ +#define module_vop_driver(__vop_driver) \ + module_driver(__vop_driver, vop_register_driver, \ + vop_unregister_driver) + +static inline struct vop_device *dev_to_vop(struct device *dev) +{ + return container_of(dev, struct vop_device, dev); +} + +static inline struct vop_driver *drv_to_vop(struct device_driver *drv) +{ + return container_of(drv, struct vop_driver, driver); +} +#endif /* _VOP_BUS_H */ diff --git a/drivers/misc/mic/card/Makefile b/drivers/misc/mic/card/Makefile index 69d58be..6e9675e 100644 --- a/drivers/misc/mic/card/Makefile +++ b/drivers/misc/mic/card/Makefile @@ -8,4 +8,3 @@ obj-$(CONFIG_INTEL_MIC_CARD) += mic_card.o mic_card-y += mic_x100.o mic_card-y += mic_device.o mic_card-y += mic_debugfs.o -mic_card-y += mic_virtio.o diff --git a/drivers/misc/mic/card/mic_device.c b/drivers/misc/mic/card/mic_device.c index d0edaf7..e749af4 100644 --- a/drivers/misc/mic/card/mic_device.c +++ b/drivers/misc/mic/card/mic_device.c @@ -34,7 +34,6 @@ #include <linux/mic_common.h> #include "../common/mic_dev.h" #include "mic_device.h" -#include "mic_virtio.h" static struct mic_driver *g_drv; @@ -250,12 +249,82 @@ static struct scif_hw_ops scif_hw_ops = { .iounmap = ___mic_iounmap, }; +static inline struct mic_driver *vpdev_to_mdrv(struct vop_device *vpdev) +{ + return dev_get_drvdata(vpdev->dev.parent); +} + +static struct mic_irq * +__mic_request_irq(struct vop_device *vpdev, + irqreturn_t (*func)(int irq, void *data), + const char *name, void *data, int intr_src) +{ + return mic_request_card_irq(func, NULL, name, data, intr_src); +} + +static void __mic_free_irq(struct vop_device *vpdev, + struct mic_irq *cookie, void *data) +{ + return mic_free_card_irq(cookie, data); +} + +static void __mic_ack_interrupt(struct vop_device *vpdev, int num) +{ + struct mic_driver *mdrv = vpdev_to_mdrv(vpdev); + + mic_ack_interrupt(&mdrv->mdev); +} + +static int __mic_next_db(struct vop_device *vpdev) +{ + return mic_next_card_db(); +} + +static void __iomem *__mic_get_remote_dp(struct vop_device *vpdev) +{ + struct mic_driver *mdrv = vpdev_to_mdrv(vpdev); + + return mdrv->dp; +} + +static void __mic_send_intr(struct vop_device *vpdev, int db) +{ + struct mic_driver *mdrv = vpdev_to_mdrv(vpdev); + + mic_send_intr(&mdrv->mdev, db); +} + +static void __iomem *__mic_ioremap(struct vop_device *vpdev, + dma_addr_t pa, size_t len) +{ + struct mic_driver *mdrv = vpdev_to_mdrv(vpdev); + + return mic_card_map(&mdrv->mdev, pa, len); +} + +static void __mic_iounmap(struct vop_device *vpdev, void __iomem *va) +{ + struct mic_driver *mdrv = vpdev_to_mdrv(vpdev); + + mic_card_unmap(&mdrv->mdev, va); +} + +static struct vop_hw_ops vop_hw_ops = { + .request_irq = __mic_request_irq, + .free_irq = __mic_free_irq, + .ack_interrupt = __mic_ack_interrupt, + .next_db = __mic_next_db, + .get_remote_dp = __mic_get_remote_dp, + .send_intr = __mic_send_intr, + .ioremap = __mic_ioremap, + .iounmap = __mic_iounmap, +}; + static int mic_request_dma_chans(struct mic_driver *mdrv) { dma_cap_mask_t mask; struct dma_chan *chan; - request_module("mic_x100_dma"); dma_cap_zero(mask); dma_cap_set(DMA_MEMCPY, mask); @@ -309,9 +378,13 @@ int __init mic_driver_init(struct mic_driver *mdrv) rc = -ENODEV; goto irq_uninit; } - rc = mic_devices_init(mdrv); - if (rc) + mdrv->vpdev = vop_register_device(mdrv->dev, VOP_DEV_TRNSP, + NULL, &vop_hw_ops, 0, + NULL, mdrv->dma_ch[0]); + if (IS_ERR(mdrv->vpdev)) { + rc = PTR_ERR(mdrv->vpdev); goto dma_free; + } bootparam = mdrv->dp; node_id = ioread8(&bootparam->node_id); mdrv->scdev = scif_register_device(mdrv->dev, MIC_SCIF_DEV, @@ -321,13 +394,13 @@ int __init mic_driver_init(struct mic_driver *mdrv) mdrv->num_dma_ch, true); if (IS_ERR(mdrv->scdev)) { rc = PTR_ERR(mdrv->scdev); - goto device_uninit; + goto vop_remove; } mic_create_card_debug_dir(mdrv); done: return rc; -device_uninit: - mic_devices_uninit(mdrv); +vop_remove: + vop_unregister_device(mdrv->vpdev); dma_free: mic_free_dma_chans(mdrv); irq_uninit: @@ -348,7 +421,7 @@ void mic_driver_uninit(struct mic_driver *mdrv) { mic_delete_card_debug_dir(mdrv); scif_unregister_device(mdrv->scdev); - mic_devices_uninit(mdrv); + vop_unregister_device(mdrv->vpdev); mic_free_dma_chans(mdrv); mic_uninit_irq(); mic_dp_uninit(); diff --git a/drivers/misc/mic/card/mic_device.h b/drivers/misc/mic/card/mic_device.h index 1dbf83c..333dbed 100644 --- a/drivers/misc/mic/card/mic_device.h +++ b/drivers/misc/mic/card/mic_device.h @@ -32,6 +32,7 @@ #include <linux/interrupt.h> #include <linux/mic_bus.h> #include "../bus/scif_bus.h" +#include "../bus/vop_bus.h" /** * struct mic_intr_info - Contains h/w specific interrupt sources info @@ -76,6 +77,7 @@ struct mic_device { * @dma_ch - Array of DMA channels * @num_dma_ch - Number of DMA channels available * @scdev: SCIF device on the SCIF virtual bus. + * @vpdev: Virtio over PCIe device on the VOP virtual bus. */ struct mic_driver { char name[20]; @@ -90,6 +92,7 @@ struct mic_driver { struct dma_chan *dma_ch[MIC_MAX_DMA_CHAN]; int num_dma_ch; struct scif_hw_dev *scdev; + struct vop_device *vpdev; }; /** diff --git a/drivers/misc/mic/card/mic_virtio.c b/drivers/misc/mic/card/mic_virtio.c deleted file mode 100644 index f6ed57d..0000000 --- a/drivers/misc/mic/card/mic_virtio.c +++ /dev/null @@ -1,634 +0,0 @@ -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2013 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * The full GNU General Public License is included in this distribution in - * the file called "COPYING". - * - * Disclaimer: The codes contained in these modules may be specific to - * the Intel Software Development Platform codenamed: Knights Ferry, and - * the Intel product codenamed: Knights Corner, and are not backward - * compatible with other Intel products. Additionally, Intel will NOT - * support the codes or instruction set in future products. - * - * Adapted from: - * - * virtio for kvm on s390 - * - * Copyright IBM Corp. 2008 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License (version 2 only) - * as published by the Free Software Foundation. - * - * Author(s): Christian Borntraeger <borntraeger@de.ibm.com> - * - * Intel MIC Card driver. - * - */ -#include <linux/delay.h> -#include <linux/slab.h> -#include <linux/virtio_config.h> - -#include "../common/mic_dev.h" -#include "mic_virtio.h" - -#define VIRTIO_SUBCODE_64 0x0D00 - -#define MIC_MAX_VRINGS 4 -struct mic_vdev { - struct virtio_device vdev; - struct mic_device_desc __iomem *desc; - struct mic_device_ctrl __iomem *dc; - struct mic_device *mdev; - void __iomem *vr[MIC_MAX_VRINGS]; - int used_size[MIC_MAX_VRINGS]; - struct completion reset_done; - struct mic_irq *virtio_cookie; - int c2h_vdev_db; -}; - -static struct mic_irq *virtio_config_cookie; -#define to_micvdev(vd) container_of(vd, struct mic_vdev, vdev) - -/* Helper API to obtain the parent of the virtio device */ -static inline struct device *mic_dev(struct mic_vdev *mvdev) -{ - return mvdev->vdev.dev.parent; -} - -/* This gets the device's feature bits. */ -static u64 mic_get_features(struct virtio_device *vdev) -{ - unsigned int i, bits; - u32 features = 0; - struct mic_device_desc __iomem *desc = to_micvdev(vdev)->desc; - u8 __iomem *in_features = mic_vq_features(desc); - int feature_len = ioread8(&desc->feature_len); - - bits = min_t(unsigned, feature_len, sizeof(features)) * 8; - for (i = 0; i < bits; i++) - if (ioread8(&in_features[i / 8]) & (BIT(i % 8))) - features |= BIT(i); - - return features; -} - -static int mic_finalize_features(struct virtio_device *vdev) -{ - unsigned int i, bits; - struct mic_device_desc __iomem *desc = to_micvdev(vdev)->desc; - u8 feature_len = ioread8(&desc->feature_len); - /* Second half of bitmap is features we accept. */ - u8 __iomem *out_features = - mic_vq_features(desc) + feature_len; - - /* Give virtio_ring a chance to accept features. */ - vring_transport_features(vdev); - - /* Make sure we don't have any features > 32 bits! */ - BUG_ON((u32)vdev->features != vdev->features); - - memset_io(out_features, 0, feature_len); - bits = min_t(unsigned, feature_len, - sizeof(vdev->features)) * 8; - for (i = 0; i < bits; i++) { - if (__virtio_test_bit(vdev, i)) - iowrite8(ioread8(&out_features[i / 8]) | (1 << (i % 8)), - &out_features[i / 8]); - } - - return 0; -} - -/* - * Reading and writing elements in config space - */ -static void mic_get(struct virtio_device *vdev, unsigned int offset, - void *buf, unsigned len) -{ - struct mic_device_desc __iomem *desc = to_micvdev(vdev)->desc; - - if (offset + len > ioread8(&desc->config_len)) - return; - memcpy_fromio(buf, mic_vq_configspace(desc) + offset, len); -} - -static void mic_set(struct virtio_device *vdev, unsigned int offset, - const void *buf, unsigned len) -{ - struct mic_device_desc __iomem *desc = to_micvdev(vdev)->desc; - - if (offset + len > ioread8(&desc->config_len)) - return; - memcpy_toio(mic_vq_configspace(desc) + offset, buf, len); -} - -/* - * The operations to get and set the status word just access the status - * field of the device descriptor. set_status also interrupts the host - * to tell about status changes. - */ -static u8 mic_get_status(struct virtio_device *vdev) -{ - return ioread8(&to_micvdev(vdev)->desc->status); -} - -static void mic_set_status(struct virtio_device *vdev, u8 status) -{ - struct mic_vdev *mvdev = to_micvdev(vdev); - if (!status) - return; - iowrite8(status, &mvdev->desc->status); - mic_send_intr(mvdev->mdev, mvdev->c2h_vdev_db); -} - -/* Inform host on a virtio device reset and wait for ack from host */ -static void mic_reset_inform_host(struct virtio_device *vdev) -{ - struct mic_vdev *mvdev = to_micvdev(vdev); - struct mic_device_ctrl __iomem *dc = mvdev->dc; - int retry; - - iowrite8(0, &dc->host_ack); - iowrite8(1, &dc->vdev_reset); - mic_send_intr(mvdev->mdev, mvdev->c2h_vdev_db); - - /* Wait till host completes all card accesses and acks the reset */ - for (retry = 100; retry--;) { - if (ioread8(&dc->host_ack)) - break; - msleep(100); - }; - - dev_dbg(mic_dev(mvdev), "%s: retry: %d\n", __func__, retry); - - /* Reset status to 0 in case we timed out */ - iowrite8(0, &mvdev->desc->status); -} - -static void mic_reset(struct virtio_device *vdev) -{ - struct mic_vdev *mvdev = to_micvdev(vdev); - - dev_dbg(mic_dev(mvdev), "%s: virtio id %d\n", - __func__, vdev->id.device); - - mic_reset_inform_host(vdev); - complete_all(&mvdev->reset_done); -} - -/* - * The virtio_ring code calls this API when it wants to notify the Host. - */ -static bool mic_notify(struct virtqueue *vq) -{ - struct mic_vdev *mvdev = vq->priv; - - mic_send_intr(mvdev->mdev, mvdev->c2h_vdev_db); - return true; -} - -static void mic_del_vq(struct virtqueue *vq, int n) -{ - struct mic_vdev *mvdev = to_micvdev(vq->vdev); - struct vring *vr = (struct vring *)(vq + 1); - - free_pages((unsigned long) vr->used, get_order(mvdev->used_size[n])); - vring_del_virtqueue(vq); - mic_card_unmap(mvdev->mdev, mvdev->vr[n]); - mvdev->vr[n] = NULL; -} - -static void mic_del_vqs(struct virtio_device *vdev) -{ - struct mic_vdev *mvdev = to_micvdev(vdev); - struct virtqueue *vq, *n; - int idx = 0; - - dev_dbg(mic_dev(mvdev), "%s\n", __func__); - - list_for_each_entry_safe(vq, n, &vdev->vqs, list) - mic_del_vq(vq, idx++); -} - -/* - * This routine will assign vring's allocated in host/io memory. Code in - * virtio_ring.c however continues to access this io memory as if it were local - * memory without io accessors. - */ -static struct virtqueue *mic_find_vq(struct virtio_device *vdev, - unsigned index, - void (*callback)(struct virtqueue *vq), - const char *name) -{ - struct mic_vdev *mvdev = to_micvdev(vdev); - struct mic_vqconfig __iomem *vqconfig; - struct mic_vqconfig config; - struct virtqueue *vq; - void __iomem *va; - struct _mic_vring_info __iomem *info; - void *used; - int vr_size, _vr_size, err, magic; - struct vring *vr; - u8 type = ioread8(&mvdev->desc->type); - - if (index >= ioread8(&mvdev->desc->num_vq)) - return ERR_PTR(-ENOENT); - - if (!name) - return ERR_PTR(-ENOENT); - - /* First assign the vring's allocated in host memory */ - vqconfig = mic_vq_config(mvdev->desc) + index; - memcpy_fromio(&config, vqconfig, sizeof(config)); - _vr_size = vring_size(le16_to_cpu(config.num), MIC_VIRTIO_RING_ALIGN); - vr_size = PAGE_ALIGN(_vr_size + sizeof(struct _mic_vring_info)); - va = mic_card_map(mvdev->mdev, le64_to_cpu(config.address), vr_size); - if (!va) - return ERR_PTR(-ENOMEM); - mvdev->vr[index] = va; - memset_io(va, 0x0, _vr_size); - vq = vring_new_virtqueue(index, le16_to_cpu(config.num), - MIC_VIRTIO_RING_ALIGN, vdev, false, - (void __force *)va, mic_notify, callback, - name); - if (!vq) { - err = -ENOMEM; - goto unmap; - } - info = va + _vr_size; - magic = ioread32(&info->magic); - - if (WARN(magic != MIC_MAGIC + type + index, "magic mismatch")) { - err = -EIO; - goto unmap; - } - - /* Allocate and reassign used ring now */ - mvdev->used_size[index] = PAGE_ALIGN(sizeof(__u16) * 3 + - sizeof(struct vring_used_elem) * - le16_to_cpu(config.num)); - used = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, - get_order(mvdev->used_size[index])); - if (!used) { - err = -ENOMEM; - dev_err(mic_dev(mvdev), "%s %d err %d\n", - __func__, __LINE__, err); - goto del_vq; - } - iowrite64(virt_to_phys(used), &vqconfig->used_address); - - /* - * To reassign the used ring here we are directly accessing - * struct vring_virtqueue which is a private data structure - * in virtio_ring.c. At the minimum, a BUILD_BUG_ON() in - * vring_new_virtqueue() would ensure that - * (&vq->vring == (struct vring *) (&vq->vq + 1)); - */ - vr = (struct vring *)(vq + 1); - vr->used = used; - - vq->priv = mvdev; - return vq; -del_vq: - vring_del_virtqueue(vq); -unmap: - mic_card_unmap(mvdev->mdev, mvdev->vr[index]); - return ERR_PTR(err); -} - -static int mic_find_vqs(struct virtio_device *vdev, unsigned nvqs, - struct virtqueue *vqs[], - vq_callback_t *callbacks[], - const char * const names[]) -{ - struct mic_vdev *mvdev = to_micvdev(vdev); - struct mic_device_ctrl __iomem *dc = mvdev->dc; - int i, err, retry; - - /* We must have this many virtqueues. */ - if (nvqs > ioread8(&mvdev->desc->num_vq)) - return -ENOENT; - - for (i = 0; i < nvqs; ++i) { - dev_dbg(mic_dev(mvdev), "%s: %d: %s\n", - __func__, i, names[i]); - vqs[i] = mic_find_vq(vdev, i, callbacks[i], names[i]); - if (IS_ERR(vqs[i])) { - err = PTR_ERR(vqs[i]); - goto error; - } - } - - iowrite8(1, &dc->used_address_updated); - /* - * Send an interrupt to the host to inform it that used - * rings have been re-assigned. - */ - mic_send_intr(mvdev->mdev, mvdev->c2h_vdev_db); - for (retry = 100; retry--;) { - if (!ioread8(&dc->used_address_updated)) - break; - msleep(100); - }; - - dev_dbg(mic_dev(mvdev), "%s: retry: %d\n", __func__, retry); - if (!retry) { - err = -ENODEV; - goto error; - } - - return 0; -error: - mic_del_vqs(vdev); - return err; -} - -/* - * The config ops structure as defined by virtio config - */ -static struct virtio_config_ops mic_vq_config_ops = { - .get_features = mic_get_features, - .finalize_features = mic_finalize_features, - .get = mic_get, - .set = mic_set, - .get_status = mic_get_status, - .set_status = mic_set_status, - .reset = mic_reset, - .find_vqs = mic_find_vqs, - .del_vqs = mic_del_vqs, -}; - -static irqreturn_t -mic_virtio_intr_handler(int irq, void *data) -{ - struct mic_vdev *mvdev = data; - struct virtqueue *vq; - - mic_ack_interrupt(mvdev->mdev); - list_for_each_entry(vq, &mvdev->vdev.vqs, list) - vring_interrupt(0, vq); - - return IRQ_HANDLED; -} - -static void mic_virtio_release_dev(struct device *_d) -{ - /* - * No need for a release method similar to virtio PCI. - * Provide an empty one to avoid getting a warning from core. - */ -} - -/* - * adds a new device and register it with virtio - * appropriate drivers are loaded by the device model - */ -static int mic_add_device(struct mic_device_desc __iomem *d, - unsigned int offset, struct mic_driver *mdrv) -{ - struct mic_vdev *mvdev; - int ret; - int virtio_db; - u8 type = ioread8(&d->type); - - mvdev = kzalloc(sizeof(*mvdev), GFP_KERNEL); - if (!mvdev) { - dev_err(mdrv->dev, "Cannot allocate mic dev %u type %u\n", - offset, type); - return -ENOMEM; - } - - mvdev->mdev = &mdrv->mdev; - mvdev->vdev.dev.parent = mdrv->dev; - mvdev->vdev.dev.release = mic_virtio_release_dev; - mvdev->vdev.id.device = type; - mvdev->vdev.config = &mic_vq_config_ops; - mvdev->desc = d; - mvdev->dc = (void __iomem *)d + mic_aligned_desc_size(d); - init_completion(&mvdev->reset_done); - - virtio_db = mic_next_card_db(); - mvdev->virtio_cookie = mic_request_card_irq(mic_virtio_intr_handler, - NULL, "virtio intr", mvdev, virtio_db); - if (IS_ERR(mvdev->virtio_cookie)) { - ret = PTR_ERR(mvdev->virtio_cookie); - goto kfree; - } - iowrite8((u8)virtio_db, &mvdev->dc->h2c_vdev_db); - mvdev->c2h_vdev_db = ioread8(&mvdev->dc->c2h_vdev_db); - - ret = register_virtio_device(&mvdev->vdev); - if (ret) { - dev_err(mic_dev(mvdev), - "Failed to register mic device %u type %u\n", - offset, type); - goto free_irq; - } - iowrite64((u64)mvdev, &mvdev->dc->vdev); - dev_dbg(mic_dev(mvdev), "%s: registered mic device %u type %u mvdev %p\n", - __func__, offset, type, mvdev); - - return 0; - -free_irq: - mic_free_card_irq(mvdev->virtio_cookie, mvdev); -kfree: - kfree(mvdev); - return ret; -} - -/* - * match for a mic device with a specific desc pointer - */ -static int mic_match_desc(struct device *dev, void *data) -{ - struct virtio_device *vdev = dev_to_virtio(dev); - struct mic_vdev *mvdev = to_micvdev(vdev); - - return mvdev->desc == (void __iomem *)data; -} - -static void mic_handle_config_change(struct mic_device_desc __iomem *d, - unsigned int offset, struct mic_driver *mdrv) -{ - struct mic_device_ctrl __iomem *dc - = (void __iomem *)d + mic_aligned_desc_size(d); - struct mic_vdev *mvdev = (struct mic_vdev *)ioread64(&dc->vdev); - - if (ioread8(&dc->config_change) != MIC_VIRTIO_PARAM_CONFIG_CHANGED) - return; - - dev_dbg(mdrv->dev, "%s %d\n", __func__, __LINE__); - virtio_config_changed(&mvdev->vdev); - iowrite8(1, &dc->guest_ack); -} - -/* - * removes a virtio device if a hot remove event has been - * requested by the host. - */ -static int mic_remove_device(struct mic_device_desc __iomem *d, - unsigned int offset, struct mic_driver *mdrv) -{ - struct mic_device_ctrl __iomem *dc - = (void __iomem *)d + mic_aligned_desc_size(d); - struct mic_vdev *mvdev = (struct mic_vdev *)ioread64(&dc->vdev); - u8 status; - int ret = -1; - - if (ioread8(&dc->config_change) == MIC_VIRTIO_PARAM_DEV_REMOVE) { - dev_dbg(mdrv->dev, - "%s %d config_change %d type %d mvdev %p\n", - __func__, __LINE__, - ioread8(&dc->config_change), ioread8(&d->type), mvdev); - - status = ioread8(&d->status); - reinit_completion(&mvdev->reset_done); - unregister_virtio_device(&mvdev->vdev); - mic_free_card_irq(mvdev->virtio_cookie, mvdev); - if (status & VIRTIO_CONFIG_S_DRIVER_OK) - wait_for_completion(&mvdev->reset_done); - kfree(mvdev); - iowrite8(1, &dc->guest_ack); - dev_dbg(mdrv->dev, "%s %d guest_ack %d\n", - __func__, __LINE__, ioread8(&dc->guest_ack)); - ret = 0; - } - - return ret; -} - -#define REMOVE_DEVICES true - -static void mic_scan_devices(struct mic_driver *mdrv, bool remove) -{ - s8 type; - unsigned int i; - struct mic_device_desc __iomem *d; - struct mic_device_ctrl __iomem *dc; - struct device *dev; - int ret; - - for (i = sizeof(struct mic_bootparam); i < MIC_DP_SIZE; - i += mic_total_desc_size(d)) { - d = mdrv->dp + i; - dc = (void __iomem *)d + mic_aligned_desc_size(d); - /* - * This read barrier is paired with the corresponding write - * barrier on the host which is inserted before adding or - * removing a virtio device descriptor, by updating the type. - */ - rmb(); - type = ioread8(&d->type); - - /* end of list */ - if (type == 0) - break; - - if (type == -1) - continue; - - /* device already exists */ - dev = device_find_child(mdrv->dev, (void __force *)d, - mic_match_desc); - if (dev) { - if (remove) - iowrite8(MIC_VIRTIO_PARAM_DEV_REMOVE, - &dc->config_change); - put_device(dev); - mic_handle_config_change(d, i, mdrv); - ret = mic_remove_device(d, i, mdrv); - if (!ret && !remove) - iowrite8(-1, &d->type); - if (remove) { - iowrite8(0, &dc->config_change); - iowrite8(0, &dc->guest_ack); - } - continue; - } - - /* new device */ - dev_dbg(mdrv->dev, "%s %d Adding new virtio device %p\n", - __func__, __LINE__, d); - if (!remove) - mic_add_device(d, i, mdrv); - } -} - -/* - * mic_hotplug_device tries to find changes in the device page. - */ -static void mic_hotplug_devices(struct work_struct *work) -{ - struct mic_driver *mdrv = container_of(work, - struct mic_driver, hotplug_work); - - mic_scan_devices(mdrv, !REMOVE_DEVICES); -} - -/* - * Interrupt handler for hot plug/config changes etc. - */ -static irqreturn_t -mic_extint_handler(int irq, void *data) -{ - struct mic_driver *mdrv = (struct mic_driver *)data; - - dev_dbg(mdrv->dev, "%s %d hotplug work\n", - __func__, __LINE__); - mic_ack_interrupt(&mdrv->mdev); - schedule_work(&mdrv->hotplug_work); - return IRQ_HANDLED; -} - -/* - * Init function for virtio - */ -int mic_devices_init(struct mic_driver *mdrv) -{ - int rc; - struct mic_bootparam __iomem *bootparam; - int config_db; - - INIT_WORK(&mdrv->hotplug_work, mic_hotplug_devices); - mic_scan_devices(mdrv, !REMOVE_DEVICES); - - config_db = mic_next_card_db(); - virtio_config_cookie = mic_request_card_irq(mic_extint_handler, NULL, - "virtio_config_intr", mdrv, - config_db); - if (IS_ERR(virtio_config_cookie)) { - rc = PTR_ERR(virtio_config_cookie); - goto exit; - } - - bootparam = mdrv->dp; - iowrite8(config_db, &bootparam->h2c_config_db); - return 0; -exit: - return rc; -} - -/* - * Uninit function for virtio - */ -void mic_devices_uninit(struct mic_driver *mdrv) -{ - struct mic_bootparam __iomem *bootparam = mdrv->dp; - iowrite8(-1, &bootparam->h2c_config_db); - mic_free_card_irq(virtio_config_cookie, mdrv); - flush_work(&mdrv->hotplug_work); - mic_scan_devices(mdrv, REMOVE_DEVICES); -} diff --git a/drivers/misc/mic/card/mic_virtio.h b/drivers/misc/mic/card/mic_virtio.h deleted file mode 100644 index d0407ba..0000000 --- a/drivers/misc/mic/card/mic_virtio.h +++ /dev/null @@ -1,76 +0,0 @@ -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2013 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * The full GNU General Public License is included in this distribution in - * the file called "COPYING". - * - * Disclaimer: The codes contained in these modules may be specific to - * the Intel Software Development Platform codenamed: Knights Ferry, and - * the Intel product codenamed: Knights Corner, and are not backward - * compatible with other Intel products. Additionally, Intel will NOT - * support the codes or instruction set in future products. - * - * Intel MIC Card driver. - * - */ -#ifndef __MIC_CARD_VIRTIO_H -#define __MIC_CARD_VIRTIO_H - -#include <linux/mic_common.h> -#include "mic_device.h" - -/* - * 64 bit I/O access - */ -#ifndef ioread64 -#define ioread64 readq -#endif -#ifndef iowrite64 -#define iowrite64 writeq -#endif - -static inline unsigned mic_desc_size(struct mic_device_desc __iomem *desc) -{ - return sizeof(*desc) - + ioread8(&desc->num_vq) * sizeof(struct mic_vqconfig) - + ioread8(&desc->feature_len) * 2 - + ioread8(&desc->config_len); -} - -static inline struct mic_vqconfig __iomem * -mic_vq_config(struct mic_device_desc __iomem *desc) -{ - return (struct mic_vqconfig __iomem *)(desc + 1); -} - -static inline __u8 __iomem * -mic_vq_features(struct mic_device_desc __iomem *desc) -{ - return (__u8 __iomem *)(mic_vq_config(desc) + ioread8(&desc->num_vq)); -} - -static inline __u8 __iomem * -mic_vq_configspace(struct mic_device_desc __iomem *desc) -{ - return mic_vq_features(desc) + ioread8(&desc->feature_len) * 2; -} -static inline unsigned mic_total_desc_size(struct mic_device_desc __iomem *desc) -{ - return mic_aligned_desc_size(desc) + sizeof(struct mic_device_ctrl); -} - -int mic_devices_init(struct mic_driver *mdrv); -void mic_devices_uninit(struct mic_driver *mdrv); - -#endif diff --git a/drivers/misc/mic/card/mic_x100.c b/drivers/misc/mic/card/mic_x100.c index b2958ce..b9f0710 100644 --- a/drivers/misc/mic/card/mic_x100.c +++ b/drivers/misc/mic/card/mic_x100.c @@ -326,6 +326,7 @@ static int __init mic_init(void) goto done; } + request_module("mic_x100_dma"); mic_init_card_debugfs(); ret = platform_device_register(&mic_platform_dev); if (ret) { diff --git a/drivers/misc/mic/cosm/cosm_main.c b/drivers/misc/mic/cosm/cosm_main.c index 4b4b356..7005cb1 100644 --- a/drivers/misc/mic/cosm/cosm_main.c +++ b/drivers/misc/mic/cosm/cosm_main.c @@ -153,8 +153,10 @@ void cosm_stop(struct cosm_device *cdev, bool force) * stop(..) calls device_unregister and will crash the system if * called multiple times. */ - bool call_hw_ops = cdev->state != MIC_RESET_FAILED && - cdev->state != MIC_READY; + u8 state = cdev->state == MIC_RESETTING ? + cdev->prev_state : cdev->state; + bool call_hw_ops = state != MIC_RESET_FAILED && + state != MIC_READY; if (cdev->state != MIC_RESETTING) cosm_set_state(cdev, MIC_RESETTING); @@ -195,8 +197,11 @@ int cosm_reset(struct cosm_device *cdev) mutex_lock(&cdev->cosm_mutex); if (cdev->state != MIC_READY) { - cosm_set_state(cdev, MIC_RESETTING); - schedule_work(&cdev->reset_trigger_work); + if (cdev->state != MIC_RESETTING) { + cdev->prev_state = cdev->state; + cosm_set_state(cdev, MIC_RESETTING); + schedule_work(&cdev->reset_trigger_work); + } } else { dev_err(&cdev->dev, "%s %d MIC is READY\n", __func__, __LINE__); rc = -EINVAL; diff --git a/drivers/misc/mic/host/Makefile b/drivers/misc/mic/host/Makefile index 004d3db..f3b5023 100644 --- a/drivers/misc/mic/host/Makefile +++ b/drivers/misc/mic/host/Makefile @@ -9,5 +9,3 @@ mic_host-objs += mic_smpt.o mic_host-objs += mic_intr.o mic_host-objs += mic_boot.o mic_host-objs += mic_debugfs.o -mic_host-objs += mic_fops.o -mic_host-objs += mic_virtio.o diff --git a/drivers/misc/mic/host/mic_boot.c b/drivers/misc/mic/host/mic_boot.c index 7845564..8c91c99 100644 --- a/drivers/misc/mic/host/mic_boot.c +++ b/drivers/misc/mic/host/mic_boot.c @@ -25,10 +25,117 @@ #include <linux/mic_common.h> #include <linux/mic_bus.h> #include "../bus/scif_bus.h" +#include "../bus/vop_bus.h" #include "../common/mic_dev.h" #include "mic_device.h" #include "mic_smpt.h" -#include "mic_virtio.h" + +static inline struct mic_device *vpdev_to_mdev(struct device *dev) +{ + return dev_get_drvdata(dev->parent); +} + +static dma_addr_t +_mic_dma_map_page(struct device *dev, struct page *page, + unsigned long offset, size_t size, + enum dma_data_direction dir, struct dma_attrs *attrs) +{ + void *va = phys_to_virt(page_to_phys(page)) + offset; + struct mic_device *mdev = vpdev_to_mdev(dev); + + return mic_map_single(mdev, va, size); +} + +static void _mic_dma_unmap_page(struct device *dev, dma_addr_t dma_addr, + size_t size, enum dma_data_direction dir, + struct dma_attrs *attrs) +{ + struct mic_device *mdev = vpdev_to_mdev(dev); + + mic_unmap_single(mdev, dma_addr, size); +} + +static const struct dma_map_ops _mic_dma_ops = { + .map_page = _mic_dma_map_page, + .unmap_page = _mic_dma_unmap_page, +}; + +static struct mic_irq * +__mic_request_irq(struct vop_device *vpdev, + irqreturn_t (*func)(int irq, void *data), + const char *name, void *data, int intr_src) +{ + struct mic_device *mdev = vpdev_to_mdev(&vpdev->dev); + + return mic_request_threaded_irq(mdev, func, NULL, name, data, + intr_src, MIC_INTR_DB); +} + +static void __mic_free_irq(struct vop_device *vpdev, + struct mic_irq *cookie, void *data) +{ + struct mic_device *mdev = vpdev_to_mdev(&vpdev->dev); + + return mic_free_irq(mdev, cookie, data); +} + +static void __mic_ack_interrupt(struct vop_device *vpdev, int num) +{ + struct mic_device *mdev = vpdev_to_mdev(&vpdev->dev); + + mdev->ops->intr_workarounds(mdev); +} + +static int __mic_next_db(struct vop_device *vpdev) +{ + struct mic_device *mdev = vpdev_to_mdev(&vpdev->dev); + + return mic_next_db(mdev); +} + +static void *__mic_get_dp(struct vop_device *vpdev) +{ + struct mic_device *mdev = vpdev_to_mdev(&vpdev->dev); + + return mdev->dp; +} + +static void __iomem *__mic_get_remote_dp(struct vop_device *vpdev) +{ + return NULL; +} + +static void __mic_send_intr(struct vop_device *vpdev, int db) +{ + struct mic_device *mdev = vpdev_to_mdev(&vpdev->dev); + + mdev->ops->send_intr(mdev, db); +} + +static void __iomem *__mic_ioremap(struct vop_device *vpdev, + dma_addr_t pa, size_t len) +{ + struct mic_device *mdev = vpdev_to_mdev(&vpdev->dev); + + return mdev->aper.va + pa; +} + +static void __mic_iounmap(struct vop_device *vpdev, void __iomem *va) +{ + /* nothing to do */ +} + +static struct vop_hw_ops vop_hw_ops = { + .request_irq = __mic_request_irq, + .free_irq = __mic_free_irq, + .ack_interrupt = __mic_ack_interrupt, + .next_db = __mic_next_db, + .get_dp = __mic_get_dp, + .get_remote_dp = __mic_get_remote_dp, + .send_intr = __mic_send_intr, + .ioremap = __mic_ioremap, + .iounmap = __mic_iounmap, +}; static inline struct mic_device *scdev_to_mdev(struct scif_hw_dev *scdev) { @@ -315,7 +422,6 @@ static int mic_request_dma_chans(struct mic_device *mdev) dma_cap_mask_t mask; struct dma_chan *chan; - request_module("mic_x100_dma"); dma_cap_zero(mask); dma_cap_set(DMA_MEMCPY, mask); @@ -387,9 +493,18 @@ static int _mic_start(struct cosm_device *cdev, int id) goto dma_free; } + mdev->vpdev = vop_register_device(&mdev->pdev->dev, + VOP_DEV_TRNSP, &_mic_dma_ops, + &vop_hw_ops, id + 1, &mdev->aper, + mdev->dma_ch[0]); + if (IS_ERR(mdev->vpdev)) { + rc = PTR_ERR(mdev->vpdev); + goto scif_remove; + } + rc = mdev->ops->load_mic_fw(mdev, NULL); if (rc) - goto scif_remove; + goto vop_remove; mic_smpt_restore(mdev); mic_intr_restore(mdev); mdev->intr_ops->enable_interrupts(mdev); @@ -397,6 +512,8 @@ static int _mic_start(struct cosm_device *cdev, int id) mdev->ops->write_spad(mdev, MIC_DPHI_SPAD, mdev->dp_dma_addr >> 32); mdev->ops->send_firmware_intr(mdev); goto unlock_ret; +vop_remove: + vop_unregister_device(mdev->vpdev); scif_remove: scif_unregister_device(mdev->scdev); dma_free: @@ -423,7 +540,7 @@ static void _mic_stop(struct cosm_device *cdev, bool force) * will be the first to be registered and the last to be * unregistered. */ - mic_virtio_reset_devices(mdev); + vop_unregister_device(mdev->vpdev); scif_unregister_device(mdev->scdev); mic_free_dma_chans(mdev); mbus_unregister_device(mdev->dma_mbdev); diff --git a/drivers/misc/mic/host/mic_debugfs.c b/drivers/misc/mic/host/mic_debugfs.c index 1058160..0a9daba 100644 --- a/drivers/misc/mic/host/mic_debugfs.c +++ b/drivers/misc/mic/host/mic_debugfs.c @@ -26,7 +26,6 @@ #include "../common/mic_dev.h" #include "mic_device.h" #include "mic_smpt.h" -#include "mic_virtio.h" /* Debugfs parent dir */ static struct dentry *mic_dbg; @@ -100,190 +99,6 @@ static const struct file_operations post_code_ops = { .release = mic_post_code_debug_release }; -static int mic_dp_show(struct seq_file *s, void *pos) -{ - struct mic_device *mdev = s->private; - struct mic_device_desc *d; - struct mic_device_ctrl *dc; - struct mic_vqconfig *vqconfig; - __u32 *features; - __u8 *config; - struct mic_bootparam *bootparam = mdev->dp; - int i, j; - - seq_printf(s, "Bootparam: magic 0x%x\n", - bootparam->magic); - seq_printf(s, "Bootparam: h2c_config_db %d\n", - bootparam->h2c_config_db); - seq_printf(s, "Bootparam: node_id %d\n", - bootparam->node_id); - seq_printf(s, "Bootparam: c2h_scif_db %d\n", - bootparam->c2h_scif_db); - seq_printf(s, "Bootparam: h2c_scif_db %d\n", - bootparam->h2c_scif_db); - seq_printf(s, "Bootparam: scif_host_dma_addr 0x%llx\n", - bootparam->scif_host_dma_addr); - seq_printf(s, "Bootparam: scif_card_dma_addr 0x%llx\n", - bootparam->scif_card_dma_addr); - - - for (i = sizeof(*bootparam); i < MIC_DP_SIZE; - i += mic_total_desc_size(d)) { - d = mdev->dp + i; - dc = (void *)d + mic_aligned_desc_size(d); - - /* end of list */ - if (d->type == 0) - break; - - if (d->type == -1) - continue; - - seq_printf(s, "Type %d ", d->type); - seq_printf(s, "Num VQ %d ", d->num_vq); - seq_printf(s, "Feature Len %d\n", d->feature_len); - seq_printf(s, "Config Len %d ", d->config_len); - seq_printf(s, "Shutdown Status %d\n", d->status); - - for (j = 0; j < d->num_vq; j++) { - vqconfig = mic_vq_config(d) + j; - seq_printf(s, "vqconfig[%d]: ", j); - seq_printf(s, "address 0x%llx ", vqconfig->address); - seq_printf(s, "num %d ", vqconfig->num); - seq_printf(s, "used address 0x%llx\n", - vqconfig->used_address); - } - - features = (__u32 *)mic_vq_features(d); - seq_printf(s, "Features: Host 0x%x ", features[0]); - seq_printf(s, "Guest 0x%x\n", features[1]); - - config = mic_vq_configspace(d); - for (j = 0; j < d->config_len; j++) - seq_printf(s, "config[%d]=%d\n", j, config[j]); - - seq_puts(s, "Device control:\n"); - seq_printf(s, "Config Change %d ", dc->config_change); - seq_printf(s, "Vdev reset %d\n", dc->vdev_reset); - seq_printf(s, "Guest Ack %d ", dc->guest_ack); - seq_printf(s, "Host ack %d\n", dc->host_ack); - seq_printf(s, "Used address updated %d ", - dc->used_address_updated); - seq_printf(s, "Vdev 0x%llx\n", dc->vdev); - seq_printf(s, "c2h doorbell %d ", dc->c2h_vdev_db); - seq_printf(s, "h2c doorbell %d\n", dc->h2c_vdev_db); - } - - return 0; -} - -static int mic_dp_debug_open(struct inode *inode, struct file *file) -{ - return single_open(file, mic_dp_show, inode->i_private); -} - -static int mic_dp_debug_release(struct inode *inode, struct file *file) -{ - return single_release(inode, file); -} - -static const struct file_operations dp_ops = { - .owner = THIS_MODULE, - .open = mic_dp_debug_open, - .read = seq_read, - .llseek = seq_lseek, - .release = mic_dp_debug_release -}; - -static int mic_vdev_info_show(struct seq_file *s, void *unused) -{ - struct mic_device *mdev = s->private; - struct list_head *pos, *tmp; - struct mic_vdev *mvdev; - int i, j; - - mutex_lock(&mdev->mic_mutex); - list_for_each_safe(pos, tmp, &mdev->vdev_list) { - mvdev = list_entry(pos, struct mic_vdev, list); - seq_printf(s, "VDEV type %d state %s in %ld out %ld\n", - mvdev->virtio_id, - mic_vdevup(mvdev) ? "UP" : "DOWN", - mvdev->in_bytes, - mvdev->out_bytes); - for (i = 0; i < MIC_MAX_VRINGS; i++) { - struct vring_desc *desc; - struct vring_avail *avail; - struct vring_used *used; - struct mic_vringh *mvr = &mvdev->mvr[i]; - struct vringh *vrh = &mvr->vrh; - int num = vrh->vring.num; - if (!num) - continue; - desc = vrh->vring.desc; - seq_printf(s, "vring i %d avail_idx %d", - i, mvr->vring.info->avail_idx & (num - 1)); - seq_printf(s, " vring i %d avail_idx %d\n", - i, mvr->vring.info->avail_idx); - seq_printf(s, "vrh i %d weak_barriers %d", - i, vrh->weak_barriers); - seq_printf(s, " last_avail_idx %d last_used_idx %d", - vrh->last_avail_idx, vrh->last_used_idx); - seq_printf(s, " completed %d\n", vrh->completed); - for (j = 0; j < num; j++) { - seq_printf(s, "desc[%d] addr 0x%llx len %d", - j, desc->addr, desc->len); - seq_printf(s, " flags 0x%x next %d\n", - desc->flags, desc->next); - desc++; - } - avail = vrh->vring.avail; - seq_printf(s, "avail flags 0x%x idx %d\n", - vringh16_to_cpu(vrh, avail->flags), - vringh16_to_cpu(vrh, avail->idx) & (num - 1)); - seq_printf(s, "avail flags 0x%x idx %d\n", - vringh16_to_cpu(vrh, avail->flags), - vringh16_to_cpu(vrh, avail->idx)); - for (j = 0; j < num; j++) - seq_printf(s, "avail ring[%d] %d\n", - j, avail->ring[j]); - used = vrh->vring.used; - seq_printf(s, "used flags 0x%x idx %d\n", - vringh16_to_cpu(vrh, used->flags), - vringh16_to_cpu(vrh, used->idx) & (num - 1)); - seq_printf(s, "used flags 0x%x idx %d\n", - vringh16_to_cpu(vrh, used->flags), - vringh16_to_cpu(vrh, used->idx)); - for (j = 0; j < num; j++) - seq_printf(s, "used ring[%d] id %d len %d\n", - j, vringh32_to_cpu(vrh, - used->ring[j].id), - vringh32_to_cpu(vrh, - used->ring[j].len)); - } - } - mutex_unlock(&mdev->mic_mutex); - - return 0; -} - -static int mic_vdev_info_debug_open(struct inode *inode, struct file *file) -{ - return single_open(file, mic_vdev_info_show, inode->i_private); -} - -static int mic_vdev_info_debug_release(struct inode *inode, struct file *file) -{ - return single_release(inode, file); -} - -static const struct file_operations vdev_info_ops = { - .owner = THIS_MODULE, - .open = mic_vdev_info_debug_open, - .read = seq_read, - .llseek = seq_lseek, - .release = mic_vdev_info_debug_release -}; - static int mic_msi_irq_info_show(struct seq_file *s, void *pos) { struct mic_device *mdev = s->private; @@ -367,11 +182,6 @@ void mic_create_debug_dir(struct mic_device *mdev) debugfs_create_file("post_code", 0444, mdev->dbg_dir, mdev, &post_code_ops); - debugfs_create_file("dp", 0444, mdev->dbg_dir, mdev, &dp_ops); - - debugfs_create_file("vdev_info", 0444, mdev->dbg_dir, mdev, - &vdev_info_ops); - debugfs_create_file("msi_irq_info", 0444, mdev->dbg_dir, mdev, &msi_irq_info_ops); } diff --git a/drivers/misc/mic/host/mic_device.h b/drivers/misc/mic/host/mic_device.h index 461184a..52b12b2 100644 --- a/drivers/misc/mic/host/mic_device.h +++ b/drivers/misc/mic/host/mic_device.h @@ -29,6 +29,7 @@ #include <linux/miscdevice.h> #include <linux/mic_bus.h> #include "../bus/scif_bus.h" +#include "../bus/vop_bus.h" #include "../bus/cosm_bus.h" #include "mic_intr.h" @@ -64,13 +65,11 @@ extern struct cosm_hw_ops cosm_hw_ops; * @bootaddr: MIC boot address. * @dp: virtio device page * @dp_dma_addr: virtio device page DMA address. - * @name: name for the misc char device - * @miscdev: registered misc char device - * @vdev_list: list of virtio devices. * @dma_mbdev: MIC BUS DMA device. * @dma_ch - Array of DMA channels * @num_dma_ch - Number of DMA channels available * @scdev: SCIF device on the SCIF virtual bus. + * @vpdev: Virtio over PCIe device on the VOP virtual bus. * @cosm_dev: COSM device */ struct mic_device { @@ -91,13 +90,11 @@ struct mic_device { u32 bootaddr; void *dp; dma_addr_t dp_dma_addr; - char name[16]; - struct miscdevice miscdev; - struct list_head vdev_list; struct mbus_device *dma_mbdev; struct dma_chan *dma_ch[MIC_MAX_DMA_CHAN]; int num_dma_ch; struct scif_hw_dev *scdev; + struct vop_device *vpdev; struct cosm_device *cosm_dev; }; diff --git a/drivers/misc/mic/host/mic_fops.c b/drivers/misc/mic/host/mic_fops.c deleted file mode 100644 index 8cc1d90..0000000 --- a/drivers/misc/mic/host/mic_fops.c +++ /dev/null @@ -1,222 +0,0 @@ -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2013 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * The full GNU General Public License is included in this distribution in - * the file called "COPYING". - * - * Intel MIC Host driver. - * - */ -#include <linux/poll.h> -#include <linux/pci.h> - -#include <linux/mic_common.h> -#include "../common/mic_dev.h" -#include "mic_device.h" -#include "mic_fops.h" -#include "mic_virtio.h" - -int mic_open(struct inode *inode, struct file *f) -{ - struct mic_vdev *mvdev; - struct mic_device *mdev = container_of(f->private_data, - struct mic_device, miscdev); - - mvdev = kzalloc(sizeof(*mvdev), GFP_KERNEL); - if (!mvdev) - return -ENOMEM; - - init_waitqueue_head(&mvdev->waitq); - INIT_LIST_HEAD(&mvdev->list); - mvdev->mdev = mdev; - mvdev->virtio_id = -1; - - f->private_data = mvdev; - return 0; -} - -int mic_release(struct inode *inode, struct file *f) -{ - struct mic_vdev *mvdev = (struct mic_vdev *)f->private_data; - - if (-1 != mvdev->virtio_id) - mic_virtio_del_device(mvdev); - f->private_data = NULL; - kfree(mvdev); - return 0; -} - -long mic_ioctl(struct file *f, unsigned int cmd, unsigned long arg) -{ - struct mic_vdev *mvdev = (struct mic_vdev *)f->private_data; - void __user *argp = (void __user *)arg; - int ret; - - switch (cmd) { - case MIC_VIRTIO_ADD_DEVICE: - { - ret = mic_virtio_add_device(mvdev, argp); - if (ret < 0) { - dev_err(mic_dev(mvdev), - "%s %d errno ret %d\n", - __func__, __LINE__, ret); - return ret; - } - break; - } - case MIC_VIRTIO_COPY_DESC: - { - struct mic_copy_desc copy; - - ret = mic_vdev_inited(mvdev); - if (ret) - return ret; - - if (copy_from_user(©, argp, sizeof(copy))) - return -EFAULT; - - dev_dbg(mic_dev(mvdev), - "%s %d === iovcnt 0x%x vr_idx 0x%x update_used %d\n", - __func__, __LINE__, copy.iovcnt, copy.vr_idx, - copy.update_used); - - ret = mic_virtio_copy_desc(mvdev, ©); - if (ret < 0) { - dev_err(mic_dev(mvdev), - "%s %d errno ret %d\n", - __func__, __LINE__, ret); - return ret; - } - if (copy_to_user( - &((struct mic_copy_desc __user *)argp)->out_len, - ©.out_len, sizeof(copy.out_len))) { - dev_err(mic_dev(mvdev), "%s %d errno ret %d\n", - __func__, __LINE__, -EFAULT); - return -EFAULT; - } - break; - } - case MIC_VIRTIO_CONFIG_CHANGE: - { - ret = mic_vdev_inited(mvdev); - if (ret) - return ret; - - ret = mic_virtio_config_change(mvdev, argp); - if (ret < 0) { - dev_err(mic_dev(mvdev), - "%s %d errno ret %d\n", - __func__, __LINE__, ret); - return ret; - } - break; - } - default: - return -ENOIOCTLCMD; - }; - return 0; -} - -/* - * We return POLLIN | POLLOUT from poll when new buffers are enqueued, and - * not when previously enqueued buffers may be available. This means that - * in the card->host (TX) path, when userspace is unblocked by poll it - * must drain all available descriptors or it can stall. - */ -unsigned int mic_poll(struct file *f, poll_table *wait) -{ - struct mic_vdev *mvdev = (struct mic_vdev *)f->private_data; - int mask = 0; - - poll_wait(f, &mvdev->waitq, wait); - - if (mic_vdev_inited(mvdev)) { - mask = POLLERR; - } else if (mvdev->poll_wake) { - mvdev->poll_wake = 0; - mask = POLLIN | POLLOUT; - } - - return mask; -} - -static inline int -mic_query_offset(struct mic_vdev *mvdev, unsigned long offset, - unsigned long *size, unsigned long *pa) -{ - struct mic_device *mdev = mvdev->mdev; - unsigned long start = MIC_DP_SIZE; - int i; - - /* - * MMAP interface is as follows: - * offset region - * 0x0 virtio device_page - * 0x1000 first vring - * 0x1000 + size of 1st vring second vring - * .... - */ - if (!offset) { - *pa = virt_to_phys(mdev->dp); - *size = MIC_DP_SIZE; - return 0; - } - - for (i = 0; i < mvdev->dd->num_vq; i++) { - struct mic_vringh *mvr = &mvdev->mvr[i]; - if (offset == start) { - *pa = virt_to_phys(mvr->vring.va); - *size = mvr->vring.len; - return 0; - } - start += mvr->vring.len; - } - return -1; -} - -/* - * Maps the device page and virtio rings to user space for readonly access. - */ -int -mic_mmap(struct file *f, struct vm_area_struct *vma) -{ - struct mic_vdev *mvdev = (struct mic_vdev *)f->private_data; - unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; - unsigned long pa, size = vma->vm_end - vma->vm_start, size_rem = size; - int i, err; - - err = mic_vdev_inited(mvdev); - if (err) - return err; - - if (vma->vm_flags & VM_WRITE) - return -EACCES; - - while (size_rem) { - i = mic_query_offset(mvdev, offset, &size, &pa); - if (i < 0) - return -EINVAL; - err = remap_pfn_range(vma, vma->vm_start + offset, - pa >> PAGE_SHIFT, size, vma->vm_page_prot); - if (err) - return err; - dev_dbg(mic_dev(mvdev), - "%s %d type %d size 0x%lx off 0x%lx pa 0x%lx vma 0x%lx\n", - __func__, __LINE__, mvdev->virtio_id, size, offset, - pa, vma->vm_start + offset); - size_rem -= size; - offset += size; - } - return 0; -} diff --git a/drivers/misc/mic/host/mic_fops.h b/drivers/misc/mic/host/mic_fops.h deleted file mode 100644 index dc3893d..0000000 --- a/drivers/misc/mic/host/mic_fops.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2013 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * The full GNU General Public License is included in this distribution in - * the file called "COPYING". - * - * Intel MIC Host driver. - * - */ -#ifndef _MIC_FOPS_H_ -#define _MIC_FOPS_H_ - -int mic_open(struct inode *inode, struct file *filp); -int mic_release(struct inode *inode, struct file *filp); -ssize_t mic_read(struct file *filp, char __user *buf, - size_t count, loff_t *pos); -long mic_ioctl(struct file *filp, unsigned int cmd, unsigned long arg); -int mic_mmap(struct file *f, struct vm_area_struct *vma); -unsigned int mic_poll(struct file *f, poll_table *wait); - -#endif diff --git a/drivers/misc/mic/host/mic_main.c b/drivers/misc/mic/host/mic_main.c index 153894e..035be3e 100644 --- a/drivers/misc/mic/host/mic_main.c +++ b/drivers/misc/mic/host/mic_main.c @@ -27,8 +27,6 @@ #include "mic_device.h" #include "mic_x100.h" #include "mic_smpt.h" -#include "mic_fops.h" -#include "mic_virtio.h" static const char mic_driver_name[] = "mic"; @@ -57,17 +55,6 @@ MODULE_DEVICE_TABLE(pci, mic_pci_tbl); /* ID allocator for MIC devices */ static struct ida g_mic_ida; -/* Base device node number for MIC devices */ -static dev_t g_mic_devno; - -static const struct file_operations mic_fops = { - .open = mic_open, - .release = mic_release, - .unlocked_ioctl = mic_ioctl, - .poll = mic_poll, - .mmap = mic_mmap, - .owner = THIS_MODULE, -}; /* Initialize the device page */ static int mic_dp_init(struct mic_device *mdev) @@ -169,7 +156,6 @@ mic_device_init(struct mic_device *mdev, struct pci_dev *pdev) mic_ops_init(mdev); mutex_init(&mdev->mic_mutex); mdev->irq_info.next_avail_src = 0; - INIT_LIST_HEAD(&mdev->vdev_list); } /** @@ -259,30 +245,15 @@ static int mic_probe(struct pci_dev *pdev, goto smpt_uninit; } mic_bootparam_init(mdev); - mic_create_debug_dir(mdev); - mdev->miscdev.minor = MISC_DYNAMIC_MINOR; - snprintf(mdev->name, sizeof(mdev->name), "mic%d", mdev->id); - mdev->miscdev.name = mdev->name; - mdev->miscdev.fops = &mic_fops; - mdev->miscdev.parent = &mdev->pdev->dev; - rc = misc_register(&mdev->miscdev); - if (rc) { - dev_err(&pdev->dev, "misc_register err id %d rc %d\n", - mdev->id, rc); - goto cleanup_debug_dir; - } - mdev->cosm_dev = cosm_register_device(&mdev->pdev->dev, &cosm_hw_ops); if (IS_ERR(mdev->cosm_dev)) { rc = PTR_ERR(mdev->cosm_dev); dev_err(&pdev->dev, "cosm_add_device failed rc %d\n", rc); - goto misc_dereg; + goto cleanup_debug_dir; } return 0; -misc_dereg: - misc_deregister(&mdev->miscdev); cleanup_debug_dir: mic_delete_debug_dir(mdev); mic_dp_uninit(mdev); @@ -323,7 +294,6 @@ static void mic_remove(struct pci_dev *pdev) return; cosm_unregister_device(mdev->cosm_dev); - misc_deregister(&mdev->miscdev); mic_delete_debug_dir(mdev); mic_dp_uninit(mdev); mic_smpt_uninit(mdev); @@ -347,26 +317,18 @@ static int __init mic_init(void) { int ret; - ret = alloc_chrdev_region(&g_mic_devno, 0, - MIC_MAX_NUM_DEVS, mic_driver_name); - if (ret) { - pr_err("alloc_chrdev_region failed ret %d\n", ret); - goto error; - } - + request_module("mic_x100_dma"); mic_init_debugfs(); ida_init(&g_mic_ida); ret = pci_register_driver(&mic_driver); if (ret) { pr_err("pci_register_driver failed ret %d\n", ret); - goto cleanup_chrdev; + goto cleanup_debugfs; } - return ret; -cleanup_chrdev: + return 0; +cleanup_debugfs: ida_destroy(&g_mic_ida); mic_exit_debugfs(); - unregister_chrdev_region(g_mic_devno, MIC_MAX_NUM_DEVS); -error: return ret; } @@ -375,7 +337,6 @@ static void __exit mic_exit(void) pci_unregister_driver(&mic_driver); ida_destroy(&g_mic_ida); mic_exit_debugfs(); - unregister_chrdev_region(g_mic_devno, MIC_MAX_NUM_DEVS); } module_init(mic_init); diff --git a/drivers/misc/mic/host/mic_virtio.c b/drivers/misc/mic/host/mic_virtio.c deleted file mode 100644 index 58b107a..0000000 --- a/drivers/misc/mic/host/mic_virtio.c +++ /dev/null @@ -1,811 +0,0 @@ -/* - * Intel MIC Platform Software Stack (MPSS) - * - * Copyright(c) 2013 Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, version 2, as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * The full GNU General Public License is included in this distribution in - * the file called "COPYING". - * - * Intel MIC Host driver. - * - */ -#include <linux/pci.h> -#include <linux/sched.h> -#include <linux/uaccess.h> -#include <linux/dmaengine.h> -#include <linux/mic_common.h> -#include "../common/mic_dev.h" -#include "mic_device.h" -#include "mic_smpt.h" -#include "mic_virtio.h" - -/* - * Size of the internal buffer used during DMA's as an intermediate buffer - * for copy to/from user. - */ -#define MIC_INT_DMA_BUF_SIZE PAGE_ALIGN(64 * 1024ULL) - -static int mic_sync_dma(struct mic_device *mdev, dma_addr_t dst, - dma_addr_t src, size_t len) -{ - int err = 0; - struct dma_async_tx_descriptor *tx; - struct dma_chan *mic_ch = mdev->dma_ch[0]; - - if (!mic_ch) { - err = -EBUSY; - goto error; - } - - tx = mic_ch->device->device_prep_dma_memcpy(mic_ch, dst, src, len, - DMA_PREP_FENCE); - if (!tx) { - err = -ENOMEM; - goto error; - } else { - dma_cookie_t cookie = tx->tx_submit(tx); - - err = dma_submit_error(cookie); - if (err) - goto error; - err = dma_sync_wait(mic_ch, cookie); - } -error: - if (err) - dev_err(&mdev->pdev->dev, "%s %d err %d\n", - __func__, __LINE__, err); - return err; -} - -/* - * Initiates the copies across the PCIe bus from card memory to a user - * space buffer. When transfers are done using DMA, source/destination - * addresses and transfer length must follow the alignment requirements of - * the MIC DMA engine. - */ -static int mic_virtio_copy_to_user(struct mic_vdev *mvdev, void __user *ubuf, - size_t len, u64 daddr, size_t dlen, - int vr_idx) -{ - struct mic_device *mdev = mvdev->mdev; - void __iomem *dbuf = mdev->aper.va + daddr; - struct mic_vringh *mvr = &mvdev->mvr[vr_idx]; - size_t dma_alignment = 1 << mdev->dma_ch[0]->device->copy_align; - size_t dma_offset; - size_t partlen; - int err; - - dma_offset = daddr - round_down(daddr, dma_alignment); - daddr -= dma_offset; - len += dma_offset; - - while (len) { - partlen = min_t(size_t, len, MIC_INT_DMA_BUF_SIZE); - - err = mic_sync_dma(mdev, mvr->buf_da, daddr, - ALIGN(partlen, dma_alignment)); - if (err) - goto err; - - if (copy_to_user(ubuf, mvr->buf + dma_offset, - partlen - dma_offset)) { - err = -EFAULT; - goto err; - } - daddr += partlen; - ubuf += partlen; - dbuf += partlen; - mvdev->in_bytes_dma += partlen; - mvdev->in_bytes += partlen; - len -= partlen; - dma_offset = 0; - } - return 0; -err: - dev_err(mic_dev(mvdev), "%s %d err %d\n", __func__, __LINE__, err); - return err; -} - -/* - * Initiates copies across the PCIe bus from a user space buffer to card - * memory. When transfers are done using DMA, source/destination addresses - * and transfer length must follow the alignment requirements of the MIC - * DMA engine. - */ -static int mic_virtio_copy_from_user(struct mic_vdev *mvdev, void __user *ubuf, - size_t len, u64 daddr, size_t dlen, - int vr_idx) -{ - struct mic_device *mdev = mvdev->mdev; - void __iomem *dbuf = mdev->aper.va + daddr; - struct mic_vringh *mvr = &mvdev->mvr[vr_idx]; - size_t dma_alignment = 1 << mdev->dma_ch[0]->device->copy_align; - size_t partlen; - int err; - - if (daddr & (dma_alignment - 1)) { - mvdev->tx_dst_unaligned += len; - goto memcpy; - } else if (ALIGN(len, dma_alignment) > dlen) { - mvdev->tx_len_unaligned += len; - goto memcpy; - } - - while (len) { - partlen = min_t(size_t, len, MIC_INT_DMA_BUF_SIZE); - - if (copy_from_user(mvr->buf, ubuf, partlen)) { - err = -EFAULT; - goto err; - } - err = mic_sync_dma(mdev, daddr, mvr->buf_da, - ALIGN(partlen, dma_alignment)); - if (err) - goto err; - daddr += partlen; - ubuf += partlen; - dbuf += partlen; - mvdev->out_bytes_dma += partlen; - mvdev->out_bytes += partlen; - len -= partlen; - } -memcpy: - /* - * We are copying to IO below and should ideally use something - * like copy_from_user_toio(..) if it existed. - */ - if (copy_from_user((void __force *)dbuf, ubuf, len)) { - err = -EFAULT; - goto err; - } - mvdev->out_bytes += len; - return 0; -err: - dev_err(mic_dev(mvdev), "%s %d err %d\n", __func__, __LINE__, err); - return err; -} - -#define MIC_VRINGH_READ true - -/* The function to call to notify the card about added buffers */ -static void mic_notify(struct vringh *vrh) -{ - struct mic_vringh *mvrh = container_of(vrh, struct mic_vringh, vrh); - struct mic_vdev *mvdev = mvrh->mvdev; - s8 db = mvdev->dc->h2c_vdev_db; - - if (db != -1) - mvdev->mdev->ops->send_intr(mvdev->mdev, db); -} - -/* Determine the total number of bytes consumed in a VRINGH KIOV */ -static inline u32 mic_vringh_iov_consumed(struct vringh_kiov *iov) -{ - int i; - u32 total = iov->consumed; - - for (i = 0; i < iov->i; i++) - total += iov->iov[i].iov_len; - return total; -} - -/* - * Traverse the VRINGH KIOV and issue the APIs to trigger the copies. - * This API is heavily based on the vringh_iov_xfer(..) implementation - * in vringh.c. The reason we cannot reuse vringh_iov_pull_kern(..) - * and vringh_iov_push_kern(..) directly is because there is no - * way to override the VRINGH xfer(..) routines as of v3.10. - */ -static int mic_vringh_copy(struct mic_vdev *mvdev, struct vringh_kiov *iov, - void __user *ubuf, size_t len, bool read, int vr_idx, - size_t *out_len) -{ - int ret = 0; - size_t partlen, tot_len = 0; - - while (len && iov->i < iov->used) { - partlen = min(iov->iov[iov->i].iov_len, len); - if (read) - ret = mic_virtio_copy_to_user(mvdev, ubuf, partlen, - (u64)iov->iov[iov->i].iov_base, - iov->iov[iov->i].iov_len, - vr_idx); - else - ret = mic_virtio_copy_from_user(mvdev, ubuf, partlen, - (u64)iov->iov[iov->i].iov_base, - iov->iov[iov->i].iov_len, - vr_idx); - if (ret) { - dev_err(mic_dev(mvdev), "%s %d err %d\n", - __func__, __LINE__, ret); - break; - } - len -= partlen; - ubuf += partlen; - tot_len += partlen; - iov->consumed += partlen; - iov->iov[iov->i].iov_len -= partlen; - iov->iov[iov->i].iov_base += partlen; - if (!iov->iov[iov->i].iov_len) { - /* Fix up old iov element then increment. */ - iov->iov[iov->i].iov_len = iov->consumed; - iov->iov[iov->i].iov_base -= iov->consumed; - - iov->consumed = 0; - iov->i++; - } - } - *out_len = tot_len; - return ret; -} - -/* - * Use the standard VRINGH infrastructure in the kernel to fetch new - * descriptors, initiate the copies and update the used ring. - */ -static int _mic_virtio_copy(struct mic_vdev *mvdev, - struct mic_copy_desc *copy) -{ - int ret = 0; - u32 iovcnt = copy->iovcnt; - struct iovec iov; - struct iovec __user *u_iov = copy->iov; - void __user *ubuf = NULL; - struct mic_vringh *mvr = &mvdev->mvr[copy->vr_idx]; - struct vringh_kiov *riov = &mvr->riov; - struct vringh_kiov *wiov = &mvr->wiov; - struct vringh *vrh = &mvr->vrh; - u16 *head = &mvr->head; - struct mic_vring *vr = &mvr->vring; - size_t len = 0, out_len; - - copy->out_len = 0; - /* Fetch a new IOVEC if all previous elements have been processed */ - if (riov->i == riov->used && wiov->i == wiov->used) { - ret = vringh_getdesc_kern(vrh, riov, wiov, - head, GFP_KERNEL); - /* Check if there are available descriptors */ - if (ret <= 0) - return ret; - } - while (iovcnt) { - if (!len) { - /* Copy over a new iovec from user space. */ - ret = copy_from_user(&iov, u_iov, sizeof(*u_iov)); - if (ret) { - ret = -EINVAL; - dev_err(mic_dev(mvdev), "%s %d err %d\n", - __func__, __LINE__, ret); - break; - } - len = iov.iov_len; - ubuf = iov.iov_base; - } - /* Issue all the read descriptors first */ - ret = mic_vringh_copy(mvdev, riov, ubuf, len, MIC_VRINGH_READ, - copy->vr_idx, &out_len); - if (ret) { - dev_err(mic_dev(mvdev), "%s %d err %d\n", - __func__, __LINE__, ret); - break; - } - len -= out_len; - ubuf += out_len; - copy->out_len += out_len; - /* Issue the write descriptors next */ - ret = mic_vringh_copy(mvdev, wiov, ubuf, len, !MIC_VRINGH_READ, - copy->vr_idx, &out_len); - if (ret) { - dev_err(mic_dev(mvdev), "%s %d err %d\n", - __func__, __LINE__, ret); - break; - } - len -= out_len; - ubuf += out_len; - copy->out_len += out_len; - if (!len) { - /* One user space iovec is now completed */ - iovcnt--; - u_iov++; - } - /* Exit loop if all elements in KIOVs have been processed. */ - if (riov->i == riov->used && wiov->i == wiov->used) - break; - } - /* - * Update the used ring if a descriptor was available and some data was - * copied in/out and the user asked for a used ring update. - */ - if (*head != USHRT_MAX && copy->out_len && copy->update_used) { - u32 total = 0; - - /* Determine the total data consumed */ - total += mic_vringh_iov_consumed(riov); - total += mic_vringh_iov_consumed(wiov); - vringh_complete_kern(vrh, *head, total); - *head = USHRT_MAX; - if (vringh_need_notify_kern(vrh) > 0) - vringh_notify(vrh); - vringh_kiov_cleanup(riov); - vringh_kiov_cleanup(wiov); - /* Update avail idx for user space */ - vr->info->avail_idx = vrh->last_avail_idx; - } - return ret; -} - -static inline int mic_verify_copy_args(struct mic_vdev *mvdev, - struct mic_copy_desc *copy) -{ - if (copy->vr_idx >= mvdev->dd->num_vq) { - dev_err(mic_dev(mvdev), "%s %d err %d\n", - __func__, __LINE__, -EINVAL); - return -EINVAL; - } - return 0; -} - -/* Copy a specified number of virtio descriptors in a chain */ -int mic_virtio_copy_desc(struct mic_vdev *mvdev, - struct mic_copy_desc *copy) -{ - int err; - struct mic_vringh *mvr = &mvdev->mvr[copy->vr_idx]; - - err = mic_verify_copy_args(mvdev, copy); - if (err) - return err; - - mutex_lock(&mvr->vr_mutex); - if (!mic_vdevup(mvdev)) { - err = -ENODEV; - dev_err(mic_dev(mvdev), "%s %d err %d\n", - __func__, __LINE__, err); - goto err; - } - err = _mic_virtio_copy(mvdev, copy); - if (err) { - dev_err(mic_dev(mvdev), "%s %d err %d\n", - __func__, __LINE__, err); - } -err: - mutex_unlock(&mvr->vr_mutex); - return err; -} - -static void mic_virtio_init_post(struct mic_vdev *mvdev) -{ - struct mic_vqconfig *vqconfig = mic_vq_config(mvdev->dd); - int i; - - for (i = 0; i < mvdev->dd->num_vq; i++) { - if (!le64_to_cpu(vqconfig[i].used_address)) { - dev_warn(mic_dev(mvdev), "used_address zero??\n"); - continue; - } - mvdev->mvr[i].vrh.vring.used = - (void __force *)mvdev->mdev->aper.va + - le64_to_cpu(vqconfig[i].used_address); - } - - mvdev->dc->used_address_updated = 0; - - dev_dbg(mic_dev(mvdev), "%s: device type %d LINKUP\n", - __func__, mvdev->virtio_id); -} - -static inline void mic_virtio_device_reset(struct mic_vdev *mvdev) -{ - int i; - - dev_dbg(mic_dev(mvdev), "%s: status %d device type %d RESET\n", - __func__, mvdev->dd->status, mvdev->virtio_id); - - for (i = 0; i < mvdev->dd->num_vq; i++) - /* - * Avoid lockdep false positive. The + 1 is for the mic - * mutex which is held in the reset devices code path. - */ - mutex_lock_nested(&mvdev->mvr[i].vr_mutex, i + 1); - - /* 0 status means "reset" */ - mvdev->dd->status = 0; - mvdev->dc->vdev_reset = 0; - mvdev->dc->host_ack = 1; - - for (i = 0; i < mvdev->dd->num_vq; i++) { - struct vringh *vrh = &mvdev->mvr[i].vrh; - mvdev->mvr[i].vring.info->avail_idx = 0; - vrh->completed = 0; - vrh->last_avail_idx = 0; - vrh->last_used_idx = 0; - } - - for (i = 0; i < mvdev->dd->num_vq; i++) - mutex_unlock(&mvdev->mvr[i].vr_mutex); -} - -void mic_virtio_reset_devices(struct mic_device *mdev) -{ - struct list_head *pos, *tmp; - struct mic_vdev *mvdev; - - dev_dbg(&mdev->pdev->dev, "%s\n", __func__); - - list_for_each_safe(pos, tmp, &mdev->vdev_list) { - mvdev = list_entry(pos, struct mic_vdev, list); - mic_virtio_device_reset(mvdev); - mvdev->poll_wake = 1; - wake_up(&mvdev->waitq); - } -} - -void mic_bh_handler(struct work_struct *work) -{ - struct mic_vdev *mvdev = container_of(work, struct mic_vdev, - virtio_bh_work); - - if (mvdev->dc->used_address_updated) - mic_virtio_init_post(mvdev); - - if (mvdev->dc->vdev_reset) - mic_virtio_device_reset(mvdev); - - mvdev->poll_wake = 1; - wake_up(&mvdev->waitq); -} - -static irqreturn_t mic_virtio_intr_handler(int irq, void *data) -{ - struct mic_vdev *mvdev = data; - struct mic_device *mdev = mvdev->mdev; - - mdev->ops->intr_workarounds(mdev); - schedule_work(&mvdev->virtio_bh_work); - return IRQ_HANDLED; -} - -int mic_virtio_config_change(struct mic_vdev *mvdev, - void __user *argp) -{ - DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake); - int ret = 0, retry, i; - struct mic_bootparam *bootparam = mvdev->mdev->dp; - s8 db = bootparam->h2c_config_db; - - mutex_lock(&mvdev->mdev->mic_mutex); - for (i = 0; i < mvdev->dd->num_vq; i++) - mutex_lock_nested(&mvdev->mvr[i].vr_mutex, i + 1); - - if (db == -1 || mvdev->dd->type == -1) { - ret = -EIO; - goto exit; - } - - if (copy_from_user(mic_vq_configspace(mvdev->dd), - argp, mvdev->dd->config_len)) { - dev_err(mic_dev(mvdev), "%s %d err %d\n", - __func__, __LINE__, -EFAULT); - ret = -EFAULT; - goto exit; - } - mvdev->dc->config_change = MIC_VIRTIO_PARAM_CONFIG_CHANGED; - mvdev->mdev->ops->send_intr(mvdev->mdev, db); - - for (retry = 100; retry--;) { - ret = wait_event_timeout(wake, - mvdev->dc->guest_ack, msecs_to_jiffies(100)); - if (ret) - break; - } - - dev_dbg(mic_dev(mvdev), - "%s %d retry: %d\n", __func__, __LINE__, retry); - mvdev->dc->config_change = 0; - mvdev->dc->guest_ack = 0; -exit: - for (i = 0; i < mvdev->dd->num_vq; i++) - mutex_unlock(&mvdev->mvr[i].vr_mutex); - mutex_unlock(&mvdev->mdev->mic_mutex); - return ret; -} - -static int mic_copy_dp_entry(struct mic_vdev *mvdev, - void __user *argp, - __u8 *type, - struct mic_device_desc **devpage) -{ - struct mic_device *mdev = mvdev->mdev; - struct mic_device_desc dd, *dd_config, *devp; - struct mic_vqconfig *vqconfig; - int ret = 0, i; - bool slot_found = false; - - if (copy_from_user(&dd, argp, sizeof(dd))) { - dev_err(mic_dev(mvdev), "%s %d err %d\n", - __func__, __LINE__, -EFAULT); - return -EFAULT; - } - - if (mic_aligned_desc_size(&dd) > MIC_MAX_DESC_BLK_SIZE || - dd.num_vq > MIC_MAX_VRINGS) { - dev_err(mic_dev(mvdev), "%s %d err %d\n", - __func__, __LINE__, -EINVAL); - return -EINVAL; - } - - dd_config = kmalloc(mic_desc_size(&dd), GFP_KERNEL); - if (dd_config == NULL) { - dev_err(mic_dev(mvdev), "%s %d err %d\n", - __func__, __LINE__, -ENOMEM); - return -ENOMEM; - } - if (copy_from_user(dd_config, argp, mic_desc_size(&dd))) { - ret = -EFAULT; - dev_err(mic_dev(mvdev), "%s %d err %d\n", - __func__, __LINE__, ret); - goto exit; - } - - vqconfig = mic_vq_config(dd_config); - for (i = 0; i < dd.num_vq; i++) { - if (le16_to_cpu(vqconfig[i].num) > MIC_MAX_VRING_ENTRIES) { - ret = -EINVAL; - dev_err(mic_dev(mvdev), "%s %d err %d\n", - __func__, __LINE__, ret); - goto exit; - } - } - - /* Find the first free device page entry */ - for (i = sizeof(struct mic_bootparam); - i < MIC_DP_SIZE - mic_total_desc_size(dd_config); - i += mic_total_desc_size(devp)) { - devp = mdev->dp + i; - if (devp->type == 0 || devp->type == -1) { - slot_found = true; - break; - } - } - if (!slot_found) { - ret = -EINVAL; - dev_err(mic_dev(mvdev), "%s %d err %d\n", - __func__, __LINE__, ret); - goto exit; - } - /* - * Save off the type before doing the memcpy. Type will be set in the - * end after completing all initialization for the new device. - */ - *type = dd_config->type; - dd_config->type = 0; - memcpy(devp, dd_config, mic_desc_size(dd_config)); - - *devpage = devp; -exit: - kfree(dd_config); - return ret; -} - -static void mic_init_device_ctrl(struct mic_vdev *mvdev, - struct mic_device_desc *devpage) -{ - struct mic_device_ctrl *dc; - - dc = (void *)devpage + mic_aligned_desc_size(devpage); - - dc->config_change = 0; - dc->guest_ack = 0; - dc->vdev_reset = 0; - dc->host_ack = 0; - dc->used_address_updated = 0; - dc->c2h_vdev_db = -1; - dc->h2c_vdev_db = -1; - mvdev->dc = dc; -} - -int mic_virtio_add_device(struct mic_vdev *mvdev, - void __user *argp) -{ - struct mic_device *mdev = mvdev->mdev; - struct mic_device_desc *dd = NULL; - struct mic_vqconfig *vqconfig; - int vr_size, i, j, ret; - u8 type = 0; - s8 db; - char irqname[10]; - struct mic_bootparam *bootparam = mdev->dp; - u16 num; - dma_addr_t vr_addr; - - mutex_lock(&mdev->mic_mutex); - - ret = mic_copy_dp_entry(mvdev, argp, &type, &dd); - if (ret) { - mutex_unlock(&mdev->mic_mutex); - return ret; - } - - mic_init_device_ctrl(mvdev, dd); - - mvdev->dd = dd; - mvdev->virtio_id = type; - vqconfig = mic_vq_config(dd); - INIT_WORK(&mvdev->virtio_bh_work, mic_bh_handler); - - for (i = 0; i < dd->num_vq; i++) { - struct mic_vringh *mvr = &mvdev->mvr[i]; - struct mic_vring *vr = &mvdev->mvr[i].vring; - num = le16_to_cpu(vqconfig[i].num); - mutex_init(&mvr->vr_mutex); - vr_size = PAGE_ALIGN(vring_size(num, MIC_VIRTIO_RING_ALIGN) + - sizeof(struct _mic_vring_info)); - vr->va = (void *) - __get_free_pages(GFP_KERNEL | __GFP_ZERO, - get_order(vr_size)); - if (!vr->va) { - ret = -ENOMEM; - dev_err(mic_dev(mvdev), "%s %d err %d\n", - __func__, __LINE__, ret); - goto err; - } - vr->len = vr_size; - vr->info = vr->va + vring_size(num, MIC_VIRTIO_RING_ALIGN); - vr->info->magic = cpu_to_le32(MIC_MAGIC + mvdev->virtio_id + i); - vr_addr = mic_map_single(mdev, vr->va, vr_size); - if (mic_map_error(vr_addr)) { - free_pages((unsigned long)vr->va, get_order(vr_size)); - ret = -ENOMEM; - dev_err(mic_dev(mvdev), "%s %d err %d\n", - __func__, __LINE__, ret); - goto err; - } - vqconfig[i].address = cpu_to_le64(vr_addr); - - vring_init(&vr->vr, num, vr->va, MIC_VIRTIO_RING_ALIGN); - ret = vringh_init_kern(&mvr->vrh, - *(u32 *)mic_vq_features(mvdev->dd), num, false, - vr->vr.desc, vr->vr.avail, vr->vr.used); - if (ret) { - dev_err(mic_dev(mvdev), "%s %d err %d\n", - __func__, __LINE__, ret); - goto err; - } - vringh_kiov_init(&mvr->riov, NULL, 0); - vringh_kiov_init(&mvr->wiov, NULL, 0); - mvr->head = USHRT_MAX; - mvr->mvdev = mvdev; - mvr->vrh.notify = mic_notify; - dev_dbg(&mdev->pdev->dev, - "%s %d index %d va %p info %p vr_size 0x%x\n", - __func__, __LINE__, i, vr->va, vr->info, vr_size); - mvr->buf = (void *)__get_free_pages(GFP_KERNEL, - get_order(MIC_INT_DMA_BUF_SIZE)); - mvr->buf_da = mic_map_single(mvdev->mdev, mvr->buf, - MIC_INT_DMA_BUF_SIZE); - } - - snprintf(irqname, sizeof(irqname), "mic%dvirtio%d", mdev->id, - mvdev->virtio_id); - mvdev->virtio_db = mic_next_db(mdev); - mvdev->virtio_cookie = mic_request_threaded_irq(mdev, - mic_virtio_intr_handler, - NULL, irqname, mvdev, - mvdev->virtio_db, MIC_INTR_DB); - if (IS_ERR(mvdev->virtio_cookie)) { - ret = PTR_ERR(mvdev->virtio_cookie); - dev_dbg(&mdev->pdev->dev, "request irq failed\n"); - goto err; - } - - mvdev->dc->c2h_vdev_db = mvdev->virtio_db; - - list_add_tail(&mvdev->list, &mdev->vdev_list); - /* - * Order the type update with previous stores. This write barrier - * is paired with the corresponding read barrier before the uncached - * system memory read of the type, on the card while scanning the - * device page. - */ - smp_wmb(); - dd->type = type; - - dev_dbg(&mdev->pdev->dev, "Added virtio device id %d\n", dd->type); - - db = bootparam->h2c_config_db; - if (db != -1) - mdev->ops->send_intr(mdev, db); - mutex_unlock(&mdev->mic_mutex); - return 0; -err: - vqconfig = mic_vq_config(dd); - for (j = 0; j < i; j++) { - struct mic_vringh *mvr = &mvdev->mvr[j]; - mic_unmap_single(mdev, le64_to_cpu(vqconfig[j].address), - mvr->vring.len); - free_pages((unsigned long)mvr->vring.va, - get_order(mvr->vring.len)); - } - mutex_unlock(&mdev->mic_mutex); - return ret; -} - -void mic_virtio_del_device(struct mic_vdev *mvdev) -{ - struct list_head *pos, *tmp; - struct mic_vdev *tmp_mvdev; - struct mic_device *mdev = mvdev->mdev; - DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake); - int i, ret, retry; - struct mic_vqconfig *vqconfig; - struct mic_bootparam *bootparam = mdev->dp; - s8 db; - - mutex_lock(&mdev->mic_mutex); - db = bootparam->h2c_config_db; - if (db == -1) - goto skip_hot_remove; - dev_dbg(&mdev->pdev->dev, - "Requesting hot remove id %d\n", mvdev->virtio_id); - mvdev->dc->config_change = MIC_VIRTIO_PARAM_DEV_REMOVE; - mdev->ops->send_intr(mdev, db); - for (retry = 100; retry--;) { - ret = wait_event_timeout(wake, - mvdev->dc->guest_ack, msecs_to_jiffies(100)); - if (ret) - break; - } - dev_dbg(&mdev->pdev->dev, - "Device id %d config_change %d guest_ack %d retry %d\n", - mvdev->virtio_id, mvdev->dc->config_change, - mvdev->dc->guest_ack, retry); - mvdev->dc->config_change = 0; - mvdev->dc->guest_ack = 0; -skip_hot_remove: - mic_free_irq(mdev, mvdev->virtio_cookie, mvdev); - flush_work(&mvdev->virtio_bh_work); - vqconfig = mic_vq_config(mvdev->dd); - for (i = 0; i < mvdev->dd->num_vq; i++) { - struct mic_vringh *mvr = &mvdev->mvr[i]; - - mic_unmap_single(mvdev->mdev, mvr->buf_da, - MIC_INT_DMA_BUF_SIZE); - free_pages((unsigned long)mvr->buf, - get_order(MIC_INT_DMA_BUF_SIZE)); - vringh_kiov_cleanup(&mvr->riov); - vringh_kiov_cleanup(&mvr->wiov); - mic_unmap_single(mdev, le64_to_cpu(vqconfig[i].address), - mvr->vring.len); - free_pages((unsigned long)mvr->vring.va, - get_order(mvr->vring.len)); - } - - list_for_each_safe(pos, tmp, &mdev->vdev_list) { - tmp_mvdev = list_entry(pos, struct mic_vdev, list); - if (tmp_mvdev == mvdev) { - list_del(pos); - dev_dbg(&mdev->pdev->dev, - "Removing virtio device id %d\n", - mvdev->virtio_id); - break; - } - } - /* - * Order the type update with previous stores. This write barrier - * is paired with the corresponding read barrier before the uncached - * system memory read of the type, on the card while scanning the - * device page. - */ - smp_wmb(); - mvdev->dd->type = -1; - mutex_unlock(&mdev->mic_mutex); -} diff --git a/drivers/misc/mic/host/mic_x100.c b/drivers/misc/mic/host/mic_x100.c index 8118ac4..82a973c 100644 --- a/drivers/misc/mic/host/mic_x100.c +++ b/drivers/misc/mic/host/mic_x100.c @@ -450,26 +450,29 @@ mic_x100_load_firmware(struct mic_device *mdev, const char *buf) rc = mic_x100_get_boot_addr(mdev); if (rc) - goto error; + return rc; /* load OS */ rc = request_firmware(&fw, mdev->cosm_dev->firmware, &mdev->pdev->dev); if (rc < 0) { dev_err(&mdev->pdev->dev, "ramdisk request_firmware failed: %d %s\n", rc, mdev->cosm_dev->firmware); - goto error; + return rc; } if (mdev->bootaddr > mdev->aper.len - fw->size) { rc = -EINVAL; dev_err(&mdev->pdev->dev, "%s %d rc %d bootaddr 0x%x\n", __func__, __LINE__, rc, mdev->bootaddr); - release_firmware(fw); goto error; } memcpy_toio(mdev->aper.va + mdev->bootaddr, fw->data, fw->size); mdev->ops->write_spad(mdev, MIC_X100_FW_SIZE, fw->size); - if (!strcmp(mdev->cosm_dev->bootmode, "flash")) - goto done; + if (!strcmp(mdev->cosm_dev->bootmode, "flash")) { + rc = -EINVAL; + dev_err(&mdev->pdev->dev, "%s %d rc %d\n", + __func__, __LINE__, rc); + goto error; + } /* load command line */ rc = mic_x100_load_command_line(mdev, fw); if (rc) { @@ -481,9 +484,11 @@ mic_x100_load_firmware(struct mic_device *mdev, const char *buf) /* load ramdisk */ if (mdev->cosm_dev->ramdisk) rc = mic_x100_load_ramdisk(mdev); + + return rc; + error: - dev_dbg(&mdev->pdev->dev, "%s %d rc %d\n", __func__, __LINE__, rc); -done: + release_firmware(fw); return rc; } diff --git a/drivers/misc/mic/scif/scif_dma.c b/drivers/misc/mic/scif/scif_dma.c index 95a13c6..cd01a0e 100644 --- a/drivers/misc/mic/scif/scif_dma.c +++ b/drivers/misc/mic/scif/scif_dma.c @@ -74,11 +74,6 @@ struct scif_copy_work { bool ordered; }; -#ifndef list_entry_next -#define list_entry_next(pos, member) \ - list_entry(pos->member.next, typeof(*pos), member) -#endif - /** * scif_reserve_dma_chan: * @ep: Endpoint Descriptor. @@ -276,13 +271,10 @@ static struct scif_mmu_notif * scif_find_mmu_notifier(struct mm_struct *mm, struct scif_endpt_rma_info *rma) { struct scif_mmu_notif *mmn; - struct list_head *item; - list_for_each(item, &rma->mmn_list) { - mmn = list_entry(item, struct scif_mmu_notif, list); + list_for_each_entry(mmn, &rma->mmn_list, list) if (mmn->mm == mm) return mmn; - } return NULL; } @@ -293,13 +285,12 @@ scif_add_mmu_notifier(struct mm_struct *mm, struct scif_endpt *ep) = kzalloc(sizeof(*mmn), GFP_KERNEL); if (!mmn) - return ERR_PTR(ENOMEM); + return ERR_PTR(-ENOMEM); scif_init_mmu_notifier(mmn, current->mm, ep); - if (mmu_notifier_register(&mmn->ep_mmu_notifier, - current->mm)) { + if (mmu_notifier_register(&mmn->ep_mmu_notifier, current->mm)) { kfree(mmn); - return ERR_PTR(EBUSY); + return ERR_PTR(-EBUSY); } list_add(&mmn->list, &ep->rma_info.mmn_list); return mmn; @@ -851,7 +842,7 @@ static void scif_rma_local_cpu_copy(s64 offset, struct scif_window *window, (window->nr_pages << PAGE_SHIFT); while (rem_len) { if (offset == end_offset) { - window = list_entry_next(window, list); + window = list_next_entry(window, list); end_offset = window->offset + (window->nr_pages << PAGE_SHIFT); } @@ -957,7 +948,7 @@ scif_rma_list_dma_copy_unaligned(struct scif_copy_work *work, remaining_len -= tail_len; while (remaining_len) { if (offset == end_offset) { - window = list_entry_next(window, list); + window = list_next_entry(window, list); end_offset = window->offset + (window->nr_pages << PAGE_SHIFT); } @@ -1064,7 +1055,7 @@ scif_rma_list_dma_copy_unaligned(struct scif_copy_work *work, } if (tail_len) { if (offset == end_offset) { - window = list_entry_next(window, list); + window = list_next_entry(window, list); end_offset = window->offset + (window->nr_pages << PAGE_SHIFT); } @@ -1147,13 +1138,13 @@ static int _scif_rma_list_dma_copy_aligned(struct scif_copy_work *work, (dst_window->nr_pages << PAGE_SHIFT); while (remaining_len) { if (src_offset == end_src_offset) { - src_window = list_entry_next(src_window, list); + src_window = list_next_entry(src_window, list); end_src_offset = src_window->offset + (src_window->nr_pages << PAGE_SHIFT); scif_init_window_iter(src_window, &src_win_iter); } if (dst_offset == end_dst_offset) { - dst_window = list_entry_next(dst_window, list); + dst_window = list_next_entry(dst_window, list); end_dst_offset = dst_window->offset + (dst_window->nr_pages << PAGE_SHIFT); scif_init_window_iter(dst_window, &dst_win_iter); @@ -1314,13 +1305,13 @@ static int scif_rma_list_dma_copy_aligned(struct scif_copy_work *work, remaining_len -= tail_len; while (remaining_len) { if (src_offset == end_src_offset) { - src_window = list_entry_next(src_window, list); + src_window = list_next_entry(src_window, list); end_src_offset = src_window->offset + (src_window->nr_pages << PAGE_SHIFT); scif_init_window_iter(src_window, &src_win_iter); } if (dst_offset == end_dst_offset) { - dst_window = list_entry_next(dst_window, list); + dst_window = list_next_entry(dst_window, list); end_dst_offset = dst_window->offset + (dst_window->nr_pages << PAGE_SHIFT); scif_init_window_iter(dst_window, &dst_win_iter); @@ -1405,9 +1396,9 @@ static int scif_rma_list_dma_copy_aligned(struct scif_copy_work *work, if (remaining_len) { loop_len = remaining_len; if (src_offset == end_src_offset) - src_window = list_entry_next(src_window, list); + src_window = list_next_entry(src_window, list); if (dst_offset == end_dst_offset) - dst_window = list_entry_next(dst_window, list); + dst_window = list_next_entry(dst_window, list); src_dma_addr = __scif_off_to_dma_addr(src_window, src_offset); dst_dma_addr = __scif_off_to_dma_addr(dst_window, dst_offset); @@ -1550,12 +1541,12 @@ static int scif_rma_list_cpu_copy(struct scif_copy_work *work) end_dst_offset = dst_window->offset + (dst_window->nr_pages << PAGE_SHIFT); if (src_offset == end_src_offset) { - src_window = list_entry_next(src_window, list); + src_window = list_next_entry(src_window, list); scif_init_window_iter(src_window, &src_win_iter); } if (dst_offset == end_dst_offset) { - dst_window = list_entry_next(dst_window, list); + dst_window = list_next_entry(dst_window, list); scif_init_window_iter(dst_window, &dst_win_iter); } @@ -1730,7 +1721,7 @@ static int scif_rma_copy(scif_epd_t epd, off_t loffset, unsigned long addr, mutex_lock(&ep->rma_info.mmn_lock); mmn = scif_find_mmu_notifier(current->mm, &ep->rma_info); if (!mmn) - scif_add_mmu_notifier(current->mm, ep); + mmn = scif_add_mmu_notifier(current->mm, ep); mutex_unlock(&ep->rma_info.mmn_lock); if (IS_ERR(mmn)) { scif_put_peer_dev(spdev); diff --git a/drivers/misc/mic/scif/scif_rma.c b/drivers/misc/mic/scif/scif_rma.c index 0fa0d242..e0203b1 100644 --- a/drivers/misc/mic/scif/scif_rma.c +++ b/drivers/misc/mic/scif/scif_rma.c @@ -1509,7 +1509,7 @@ off_t scif_register_pinned_pages(scif_epd_t epd, if ((map_flags & SCIF_MAP_FIXED) && ((ALIGN(offset, PAGE_SIZE) != offset) || (offset < 0) || - (offset + (off_t)len < offset))) + (len > LONG_MAX - offset))) return -EINVAL; might_sleep(); @@ -1612,7 +1612,7 @@ off_t scif_register(scif_epd_t epd, void *addr, size_t len, off_t offset, if ((map_flags & SCIF_MAP_FIXED) && ((ALIGN(offset, PAGE_SIZE) != offset) || (offset < 0) || - (offset + (off_t)len < offset))) + (len > LONG_MAX - offset))) return -EINVAL; /* Unsupported protection requested */ @@ -1730,7 +1730,8 @@ scif_unregister(scif_epd_t epd, off_t offset, size_t len) /* Offset is not page aligned or offset+len wraps around */ if ((ALIGN(offset, PAGE_SIZE) != offset) || - (offset + (off_t)len < offset)) + (offset < 0) || + (len > LONG_MAX - offset)) return -EINVAL; err = scif_verify_epd(ep); diff --git a/drivers/misc/mic/vop/Makefile b/drivers/misc/mic/vop/Makefile new file mode 100644 index 0000000..78819c8 --- /dev/null +++ b/drivers/misc/mic/vop/Makefile @@ -0,0 +1,9 @@ +# +# Makefile - Intel MIC Linux driver. +# Copyright(c) 2016, Intel Corporation. +# +obj-m := vop.o + +vop-objs += vop_main.o +vop-objs += vop_debugfs.o +vop-objs += vop_vringh.o diff --git a/drivers/misc/mic/vop/vop_debugfs.c b/drivers/misc/mic/vop/vop_debugfs.c new file mode 100644 index 0000000..ab43884 --- /dev/null +++ b/drivers/misc/mic/vop/vop_debugfs.c @@ -0,0 +1,232 @@ +/* + * Intel MIC Platform Software Stack (MPSS) + * + * Copyright(c) 2016 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Intel Virtio Over PCIe (VOP) driver. + * + */ +#include <linux/debugfs.h> +#include <linux/seq_file.h> + +#include "vop_main.h" + +static int vop_dp_show(struct seq_file *s, void *pos) +{ + struct mic_device_desc *d; + struct mic_device_ctrl *dc; + struct mic_vqconfig *vqconfig; + __u32 *features; + __u8 *config; + struct vop_info *vi = s->private; + struct vop_device *vpdev = vi->vpdev; + struct mic_bootparam *bootparam = vpdev->hw_ops->get_dp(vpdev); + int j, k; + + seq_printf(s, "Bootparam: magic 0x%x\n", + bootparam->magic); + seq_printf(s, "Bootparam: h2c_config_db %d\n", + bootparam->h2c_config_db); + seq_printf(s, "Bootparam: node_id %d\n", + bootparam->node_id); + seq_printf(s, "Bootparam: c2h_scif_db %d\n", + bootparam->c2h_scif_db); + seq_printf(s, "Bootparam: h2c_scif_db %d\n", + bootparam->h2c_scif_db); + seq_printf(s, "Bootparam: scif_host_dma_addr 0x%llx\n", + bootparam->scif_host_dma_addr); + seq_printf(s, "Bootparam: scif_card_dma_addr 0x%llx\n", + bootparam->scif_card_dma_addr); + + for (j = sizeof(*bootparam); + j < MIC_DP_SIZE; j += mic_total_desc_size(d)) { + d = (void *)bootparam + j; + dc = (void *)d + mic_aligned_desc_size(d); + + /* end of list */ + if (d->type == 0) + break; + + if (d->type == -1) + continue; + + seq_printf(s, "Type %d ", d->type); + seq_printf(s, "Num VQ %d ", d->num_vq); + seq_printf(s, "Feature Len %d\n", d->feature_len); + seq_printf(s, "Config Len %d ", d->config_len); + seq_printf(s, "Shutdown Status %d\n", d->status); + + for (k = 0; k < d->num_vq; k++) { + vqconfig = mic_vq_config(d) + k; + seq_printf(s, "vqconfig[%d]: ", k); + seq_printf(s, "address 0x%llx ", + vqconfig->address); + seq_printf(s, "num %d ", vqconfig->num); + seq_printf(s, "used address 0x%llx\n", + vqconfig->used_address); + } + + features = (__u32 *)mic_vq_features(d); + seq_printf(s, "Features: Host 0x%x ", features[0]); + seq_printf(s, "Guest 0x%x\n", features[1]); + + config = mic_vq_configspace(d); + for (k = 0; k < d->config_len; k++) + seq_printf(s, "config[%d]=%d\n", k, config[k]); + + seq_puts(s, "Device control:\n"); + seq_printf(s, "Config Change %d ", dc->config_change); + seq_printf(s, "Vdev reset %d\n", dc->vdev_reset); + seq_printf(s, "Guest Ack %d ", dc->guest_ack); + seq_printf(s, "Host ack %d\n", dc->host_ack); + seq_printf(s, "Used address updated %d ", + dc->used_address_updated); + seq_printf(s, "Vdev 0x%llx\n", dc->vdev); + seq_printf(s, "c2h doorbell %d ", dc->c2h_vdev_db); + seq_printf(s, "h2c doorbell %d\n", dc->h2c_vdev_db); + } + schedule_work(&vi->hotplug_work); + return 0; +} + +static int vop_dp_debug_open(struct inode *inode, struct file *file) +{ + return single_open(file, vop_dp_show, inode->i_private); +} + +static int vop_dp_debug_release(struct inode *inode, struct file *file) +{ + return single_release(inode, file); +} + +static const struct file_operations dp_ops = { + .owner = THIS_MODULE, + .open = vop_dp_debug_open, + .read = seq_read, + .llseek = seq_lseek, + .release = vop_dp_debug_release +}; + +static int vop_vdev_info_show(struct seq_file *s, void *unused) +{ + struct vop_info *vi = s->private; + struct list_head *pos, *tmp; + struct vop_vdev *vdev; + int i, j; + + mutex_lock(&vi->vop_mutex); + list_for_each_safe(pos, tmp, &vi->vdev_list) { + vdev = list_entry(pos, struct vop_vdev, list); + seq_printf(s, "VDEV type %d state %s in %ld out %ld in_dma %ld out_dma %ld\n", + vdev->virtio_id, + vop_vdevup(vdev) ? "UP" : "DOWN", + vdev->in_bytes, + vdev->out_bytes, + vdev->in_bytes_dma, + vdev->out_bytes_dma); + for (i = 0; i < MIC_MAX_VRINGS; i++) { + struct vring_desc *desc; + struct vring_avail *avail; + struct vring_used *used; + struct vop_vringh *vvr = &vdev->vvr[i]; + struct vringh *vrh = &vvr->vrh; + int num = vrh->vring.num; + + if (!num) + continue; + desc = vrh->vring.desc; + seq_printf(s, "vring i %d avail_idx %d", + i, vvr->vring.info->avail_idx & (num - 1)); + seq_printf(s, " vring i %d avail_idx %d\n", + i, vvr->vring.info->avail_idx); + seq_printf(s, "vrh i %d weak_barriers %d", + i, vrh->weak_barriers); + seq_printf(s, " last_avail_idx %d last_used_idx %d", + vrh->last_avail_idx, vrh->last_used_idx); + seq_printf(s, " completed %d\n", vrh->completed); + for (j = 0; j < num; j++) { + seq_printf(s, "desc[%d] addr 0x%llx len %d", + j, desc->addr, desc->len); + seq_printf(s, " flags 0x%x next %d\n", + desc->flags, desc->next); + desc++; + } + avail = vrh->vring.avail; + seq_printf(s, "avail flags 0x%x idx %d\n", + vringh16_to_cpu(vrh, avail->flags), + vringh16_to_cpu(vrh, + avail->idx) & (num - 1)); + seq_printf(s, "avail flags 0x%x idx %d\n", + vringh16_to_cpu(vrh, avail->flags), + vringh16_to_cpu(vrh, avail->idx)); + for (j = 0; j < num; j++) + seq_printf(s, "avail ring[%d] %d\n", + j, avail->ring[j]); + used = vrh->vring.used; + seq_printf(s, "used flags 0x%x idx %d\n", + vringh16_to_cpu(vrh, used->flags), + vringh16_to_cpu(vrh, used->idx) & (num - 1)); + seq_printf(s, "used flags 0x%x idx %d\n", + vringh16_to_cpu(vrh, used->flags), + vringh16_to_cpu(vrh, used->idx)); + for (j = 0; j < num; j++) + seq_printf(s, "used ring[%d] id %d len %d\n", + j, vringh32_to_cpu(vrh, + used->ring[j].id), + vringh32_to_cpu(vrh, + used->ring[j].len)); + } + } + mutex_unlock(&vi->vop_mutex); + + return 0; +} + +static int vop_vdev_info_debug_open(struct inode *inode, struct file *file) +{ + return single_open(file, vop_vdev_info_show, inode->i_private); +} + +static int vop_vdev_info_debug_release(struct inode *inode, struct file *file) +{ + return single_release(inode, file); +} + +static const struct file_operations vdev_info_ops = { + .owner = THIS_MODULE, + .open = vop_vdev_info_debug_open, + .read = seq_read, + .llseek = seq_lseek, + .release = vop_vdev_info_debug_release +}; + +void vop_init_debugfs(struct vop_info *vi) +{ + char name[16]; + + snprintf(name, sizeof(name), "%s%d", KBUILD_MODNAME, vi->vpdev->dnode); + vi->dbg = debugfs_create_dir(name, NULL); + if (!vi->dbg) { + pr_err("can't create debugfs dir vop\n"); + return; + } + debugfs_create_file("dp", 0444, vi->dbg, vi, &dp_ops); + debugfs_create_file("vdev_info", 0444, vi->dbg, vi, &vdev_info_ops); +} + +void vop_exit_debugfs(struct vop_info *vi) +{ + debugfs_remove_recursive(vi->dbg); +} diff --git a/drivers/misc/mic/vop/vop_main.c b/drivers/misc/mic/vop/vop_main.c new file mode 100644 index 0000000..1a2b67f3 --- /dev/null +++ b/drivers/misc/mic/vop/vop_main.c @@ -0,0 +1,755 @@ +/* + * Intel MIC Platform Software Stack (MPSS) + * + * Copyright(c) 2016 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Adapted from: + * + * virtio for kvm on s390 + * + * Copyright IBM Corp. 2008 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License (version 2 only) + * as published by the Free Software Foundation. + * + * Author(s): Christian Borntraeger <borntraeger@de.ibm.com> + * + * Intel Virtio Over PCIe (VOP) driver. + * + */ +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/dma-mapping.h> + +#include "vop_main.h" + +#define VOP_MAX_VRINGS 4 + +/* + * _vop_vdev - Allocated per virtio device instance injected by the peer. + * + * @vdev: Virtio device + * @desc: Virtio device page descriptor + * @dc: Virtio device control + * @vpdev: VOP device which is the parent for this virtio device + * @vr: Buffer for accessing the VRING + * @used: Buffer for used + * @used_size: Size of the used buffer + * @reset_done: Track whether VOP reset is complete + * @virtio_cookie: Cookie returned upon requesting a interrupt + * @c2h_vdev_db: The doorbell used by the guest to interrupt the host + * @h2c_vdev_db: The doorbell used by the host to interrupt the guest + * @dnode: The destination node + */ +struct _vop_vdev { + struct virtio_device vdev; + struct mic_device_desc __iomem *desc; + struct mic_device_ctrl __iomem *dc; + struct vop_device *vpdev; + void __iomem *vr[VOP_MAX_VRINGS]; + dma_addr_t used[VOP_MAX_VRINGS]; + int used_size[VOP_MAX_VRINGS]; + struct completion reset_done; + struct mic_irq *virtio_cookie; + int c2h_vdev_db; + int h2c_vdev_db; + int dnode; +}; + +#define to_vopvdev(vd) container_of(vd, struct _vop_vdev, vdev) + +#define _vop_aligned_desc_size(d) __mic_align(_vop_desc_size(d), 8) + +/* Helper API to obtain the parent of the virtio device */ +static inline struct device *_vop_dev(struct _vop_vdev *vdev) +{ + return vdev->vdev.dev.parent; +} + +static inline unsigned _vop_desc_size(struct mic_device_desc __iomem *desc) +{ + return sizeof(*desc) + + ioread8(&desc->num_vq) * sizeof(struct mic_vqconfig) + + ioread8(&desc->feature_len) * 2 + + ioread8(&desc->config_len); +} + +static inline struct mic_vqconfig __iomem * +_vop_vq_config(struct mic_device_desc __iomem *desc) +{ + return (struct mic_vqconfig __iomem *)(desc + 1); +} + +static inline u8 __iomem * +_vop_vq_features(struct mic_device_desc __iomem *desc) +{ + return (u8 __iomem *)(_vop_vq_config(desc) + ioread8(&desc->num_vq)); +} + +static inline u8 __iomem * +_vop_vq_configspace(struct mic_device_desc __iomem *desc) +{ + return _vop_vq_features(desc) + ioread8(&desc->feature_len) * 2; +} + +static inline unsigned +_vop_total_desc_size(struct mic_device_desc __iomem *desc) +{ + return _vop_aligned_desc_size(desc) + sizeof(struct mic_device_ctrl); +} + +/* This gets the device's feature bits. */ +static u64 vop_get_features(struct virtio_device *vdev) +{ + unsigned int i, bits; + u32 features = 0; + struct mic_device_desc __iomem *desc = to_vopvdev(vdev)->desc; + u8 __iomem *in_features = _vop_vq_features(desc); + int feature_len = ioread8(&desc->feature_len); + + bits = min_t(unsigned, feature_len, sizeof(vdev->features)) * 8; + for (i = 0; i < bits; i++) + if (ioread8(&in_features[i / 8]) & (BIT(i % 8))) + features |= BIT(i); + + return features; +} + +static int vop_finalize_features(struct virtio_device *vdev) +{ + unsigned int i, bits; + struct mic_device_desc __iomem *desc = to_vopvdev(vdev)->desc; + u8 feature_len = ioread8(&desc->feature_len); + /* Second half of bitmap is features we accept. */ + u8 __iomem *out_features = + _vop_vq_features(desc) + feature_len; + + /* Give virtio_ring a chance to accept features. */ + vring_transport_features(vdev); + + memset_io(out_features, 0, feature_len); + bits = min_t(unsigned, feature_len, + sizeof(vdev->features)) * 8; + for (i = 0; i < bits; i++) { + if (__virtio_test_bit(vdev, i)) + iowrite8(ioread8(&out_features[i / 8]) | (1 << (i % 8)), + &out_features[i / 8]); + } + return 0; +} + +/* + * Reading and writing elements in config space + */ +static void vop_get(struct virtio_device *vdev, unsigned int offset, + void *buf, unsigned len) +{ + struct mic_device_desc __iomem *desc = to_vopvdev(vdev)->desc; + + if (offset + len > ioread8(&desc->config_len)) + return; + memcpy_fromio(buf, _vop_vq_configspace(desc) + offset, len); +} + +static void vop_set(struct virtio_device *vdev, unsigned int offset, + const void *buf, unsigned len) +{ + struct mic_device_desc __iomem *desc = to_vopvdev(vdev)->desc; + + if (offset + len > ioread8(&desc->config_len)) + return; + memcpy_toio(_vop_vq_configspace(desc) + offset, buf, len); +} + +/* + * The operations to get and set the status word just access the status + * field of the device descriptor. set_status also interrupts the host + * to tell about status changes. + */ +static u8 vop_get_status(struct virtio_device *vdev) +{ + return ioread8(&to_vopvdev(vdev)->desc->status); +} + +static void vop_set_status(struct virtio_device *dev, u8 status) +{ + struct _vop_vdev *vdev = to_vopvdev(dev); + struct vop_device *vpdev = vdev->vpdev; + + if (!status) + return; + iowrite8(status, &vdev->desc->status); + vpdev->hw_ops->send_intr(vpdev, vdev->c2h_vdev_db); +} + +/* Inform host on a virtio device reset and wait for ack from host */ +static void vop_reset_inform_host(struct virtio_device *dev) +{ + struct _vop_vdev *vdev = to_vopvdev(dev); + struct mic_device_ctrl __iomem *dc = vdev->dc; + struct vop_device *vpdev = vdev->vpdev; + int retry; + + iowrite8(0, &dc->host_ack); + iowrite8(1, &dc->vdev_reset); + vpdev->hw_ops->send_intr(vpdev, vdev->c2h_vdev_db); + + /* Wait till host completes all card accesses and acks the reset */ + for (retry = 100; retry--;) { + if (ioread8(&dc->host_ack)) + break; + msleep(100); + }; + + dev_dbg(_vop_dev(vdev), "%s: retry: %d\n", __func__, retry); + + /* Reset status to 0 in case we timed out */ + iowrite8(0, &vdev->desc->status); +} + +static void vop_reset(struct virtio_device *dev) +{ + struct _vop_vdev *vdev = to_vopvdev(dev); + + dev_dbg(_vop_dev(vdev), "%s: virtio id %d\n", + __func__, dev->id.device); + + vop_reset_inform_host(dev); + complete_all(&vdev->reset_done); +} + +/* + * The virtio_ring code calls this API when it wants to notify the Host. + */ +static bool vop_notify(struct virtqueue *vq) +{ + struct _vop_vdev *vdev = vq->priv; + struct vop_device *vpdev = vdev->vpdev; + + vpdev->hw_ops->send_intr(vpdev, vdev->c2h_vdev_db); + return true; +} + +static void vop_del_vq(struct virtqueue *vq, int n) +{ + struct _vop_vdev *vdev = to_vopvdev(vq->vdev); + struct vring *vr = (struct vring *)(vq + 1); + struct vop_device *vpdev = vdev->vpdev; + + dma_unmap_single(&vpdev->dev, vdev->used[n], + vdev->used_size[n], DMA_BIDIRECTIONAL); + free_pages((unsigned long)vr->used, get_order(vdev->used_size[n])); + vring_del_virtqueue(vq); + vpdev->hw_ops->iounmap(vpdev, vdev->vr[n]); + vdev->vr[n] = NULL; +} + +static void vop_del_vqs(struct virtio_device *dev) +{ + struct _vop_vdev *vdev = to_vopvdev(dev); + struct virtqueue *vq, *n; + int idx = 0; + + dev_dbg(_vop_dev(vdev), "%s\n", __func__); + + list_for_each_entry_safe(vq, n, &dev->vqs, list) + vop_del_vq(vq, idx++); +} + +/* + * This routine will assign vring's allocated in host/io memory. Code in + * virtio_ring.c however continues to access this io memory as if it were local + * memory without io accessors. + */ +static struct virtqueue *vop_find_vq(struct virtio_device *dev, + unsigned index, + void (*callback)(struct virtqueue *vq), + const char *name) +{ + struct _vop_vdev *vdev = to_vopvdev(dev); + struct vop_device *vpdev = vdev->vpdev; + struct mic_vqconfig __iomem *vqconfig; + struct mic_vqconfig config; + struct virtqueue *vq; + void __iomem *va; + struct _mic_vring_info __iomem *info; + void *used; + int vr_size, _vr_size, err, magic; + struct vring *vr; + u8 type = ioread8(&vdev->desc->type); + + if (index >= ioread8(&vdev->desc->num_vq)) + return ERR_PTR(-ENOENT); + + if (!name) + return ERR_PTR(-ENOENT); + + /* First assign the vring's allocated in host memory */ + vqconfig = _vop_vq_config(vdev->desc) + index; + memcpy_fromio(&config, vqconfig, sizeof(config)); + _vr_size = vring_size(le16_to_cpu(config.num), MIC_VIRTIO_RING_ALIGN); + vr_size = PAGE_ALIGN(_vr_size + sizeof(struct _mic_vring_info)); + va = vpdev->hw_ops->ioremap(vpdev, le64_to_cpu(config.address), + vr_size); + if (!va) + return ERR_PTR(-ENOMEM); + vdev->vr[index] = va; + memset_io(va, 0x0, _vr_size); + vq = vring_new_virtqueue( + index, + le16_to_cpu(config.num), MIC_VIRTIO_RING_ALIGN, + dev, + false, + (void __force *)va, vop_notify, callback, name); + if (!vq) { + err = -ENOMEM; + goto unmap; + } + info = va + _vr_size; + magic = ioread32(&info->magic); + + if (WARN(magic != MIC_MAGIC + type + index, "magic mismatch")) { + err = -EIO; + goto unmap; + } + + /* Allocate and reassign used ring now */ + vdev->used_size[index] = PAGE_ALIGN(sizeof(__u16) * 3 + + sizeof(struct vring_used_elem) * + le16_to_cpu(config.num)); + used = (void *)__get_free_pages(GFP_KERNEL | __GFP_ZERO, + get_order(vdev->used_size[index])); + if (!used) { + err = -ENOMEM; + dev_err(_vop_dev(vdev), "%s %d err %d\n", + __func__, __LINE__, err); + goto del_vq; + } + vdev->used[index] = dma_map_single(&vpdev->dev, used, + vdev->used_size[index], + DMA_BIDIRECTIONAL); + if (dma_mapping_error(&vpdev->dev, vdev->used[index])) { + err = -ENOMEM; + dev_err(_vop_dev(vdev), "%s %d err %d\n", + __func__, __LINE__, err); + goto free_used; + } + writeq(vdev->used[index], &vqconfig->used_address); + /* + * To reassign the used ring here we are directly accessing + * struct vring_virtqueue which is a private data structure + * in virtio_ring.c. At the minimum, a BUILD_BUG_ON() in + * vring_new_virtqueue() would ensure that + * (&vq->vring == (struct vring *) (&vq->vq + 1)); + */ + vr = (struct vring *)(vq + 1); + vr->used = used; + + vq->priv = vdev; + return vq; +free_used: + free_pages((unsigned long)used, + get_order(vdev->used_size[index])); +del_vq: + vring_del_virtqueue(vq); +unmap: + vpdev->hw_ops->iounmap(vpdev, vdev->vr[index]); + return ERR_PTR(err); +} + +static int vop_find_vqs(struct virtio_device *dev, unsigned nvqs, + struct virtqueue *vqs[], + vq_callback_t *callbacks[], + const char * const names[]) +{ + struct _vop_vdev *vdev = to_vopvdev(dev); + struct vop_device *vpdev = vdev->vpdev; + struct mic_device_ctrl __iomem *dc = vdev->dc; + int i, err, retry; + + /* We must have this many virtqueues. */ + if (nvqs > ioread8(&vdev->desc->num_vq)) + return -ENOENT; + + for (i = 0; i < nvqs; ++i) { + dev_dbg(_vop_dev(vdev), "%s: %d: %s\n", + __func__, i, names[i]); + vqs[i] = vop_find_vq(dev, i, callbacks[i], names[i]); + if (IS_ERR(vqs[i])) { + err = PTR_ERR(vqs[i]); + goto error; + } + } + + iowrite8(1, &dc->used_address_updated); + /* + * Send an interrupt to the host to inform it that used + * rings have been re-assigned. + */ + vpdev->hw_ops->send_intr(vpdev, vdev->c2h_vdev_db); + for (retry = 100; --retry;) { + if (!ioread8(&dc->used_address_updated)) + break; + msleep(100); + }; + + dev_dbg(_vop_dev(vdev), "%s: retry: %d\n", __func__, retry); + if (!retry) { + err = -ENODEV; + goto error; + } + + return 0; +error: + vop_del_vqs(dev); + return err; +} + +/* + * The config ops structure as defined by virtio config + */ +static struct virtio_config_ops vop_vq_config_ops = { + .get_features = vop_get_features, + .finalize_features = vop_finalize_features, + .get = vop_get, + .set = vop_set, + .get_status = vop_get_status, + .set_status = vop_set_status, + .reset = vop_reset, + .find_vqs = vop_find_vqs, + .del_vqs = vop_del_vqs, +}; + +static irqreturn_t vop_virtio_intr_handler(int irq, void *data) +{ + struct _vop_vdev *vdev = data; + struct vop_device *vpdev = vdev->vpdev; + struct virtqueue *vq; + + vpdev->hw_ops->ack_interrupt(vpdev, vdev->h2c_vdev_db); + list_for_each_entry(vq, &vdev->vdev.vqs, list) + vring_interrupt(0, vq); + + return IRQ_HANDLED; +} + +static void vop_virtio_release_dev(struct device *_d) +{ + /* + * No need for a release method similar to virtio PCI. + * Provide an empty one to avoid getting a warning from core. + */ +} + +/* + * adds a new device and register it with virtio + * appropriate drivers are loaded by the device model + */ +static int _vop_add_device(struct mic_device_desc __iomem *d, + unsigned int offset, struct vop_device *vpdev, + int dnode) +{ + struct _vop_vdev *vdev; + int ret; + u8 type = ioread8(&d->type); + + vdev = kzalloc(sizeof(*vdev), GFP_KERNEL); + if (!vdev) + return -ENOMEM; + + vdev->vpdev = vpdev; + vdev->vdev.dev.parent = &vpdev->dev; + vdev->vdev.dev.release = vop_virtio_release_dev; + vdev->vdev.id.device = type; + vdev->vdev.config = &vop_vq_config_ops; + vdev->desc = d; + vdev->dc = (void __iomem *)d + _vop_aligned_desc_size(d); + vdev->dnode = dnode; + vdev->vdev.priv = (void *)(u64)dnode; + init_completion(&vdev->reset_done); + + vdev->h2c_vdev_db = vpdev->hw_ops->next_db(vpdev); + vdev->virtio_cookie = vpdev->hw_ops->request_irq(vpdev, + vop_virtio_intr_handler, "virtio intr", + vdev, vdev->h2c_vdev_db); + if (IS_ERR(vdev->virtio_cookie)) { + ret = PTR_ERR(vdev->virtio_cookie); + goto kfree; + } + iowrite8((u8)vdev->h2c_vdev_db, &vdev->dc->h2c_vdev_db); + vdev->c2h_vdev_db = ioread8(&vdev->dc->c2h_vdev_db); + + ret = register_virtio_device(&vdev->vdev); + if (ret) { + dev_err(_vop_dev(vdev), + "Failed to register vop device %u type %u\n", + offset, type); + goto free_irq; + } + writeq((u64)vdev, &vdev->dc->vdev); + dev_dbg(_vop_dev(vdev), "%s: registered vop device %u type %u vdev %p\n", + __func__, offset, type, vdev); + + return 0; + +free_irq: + vpdev->hw_ops->free_irq(vpdev, vdev->virtio_cookie, vdev); +kfree: + kfree(vdev); + return ret; +} + +/* + * match for a vop device with a specific desc pointer + */ +static int vop_match_desc(struct device *dev, void *data) +{ + struct virtio_device *_dev = dev_to_virtio(dev); + struct _vop_vdev *vdev = to_vopvdev(_dev); + + return vdev->desc == (void __iomem *)data; +} + +static void _vop_handle_config_change(struct mic_device_desc __iomem *d, + unsigned int offset, + struct vop_device *vpdev) +{ + struct mic_device_ctrl __iomem *dc + = (void __iomem *)d + _vop_aligned_desc_size(d); + struct _vop_vdev *vdev = (struct _vop_vdev *)readq(&dc->vdev); + + if (ioread8(&dc->config_change) != MIC_VIRTIO_PARAM_CONFIG_CHANGED) + return; + + dev_dbg(&vpdev->dev, "%s %d\n", __func__, __LINE__); + virtio_config_changed(&vdev->vdev); + iowrite8(1, &dc->guest_ack); +} + +/* + * removes a virtio device if a hot remove event has been + * requested by the host. + */ +static int _vop_remove_device(struct mic_device_desc __iomem *d, + unsigned int offset, struct vop_device *vpdev) +{ + struct mic_device_ctrl __iomem *dc + = (void __iomem *)d + _vop_aligned_desc_size(d); + struct _vop_vdev *vdev = (struct _vop_vdev *)readq(&dc->vdev); + u8 status; + int ret = -1; + + if (ioread8(&dc->config_change) == MIC_VIRTIO_PARAM_DEV_REMOVE) { + dev_dbg(&vpdev->dev, + "%s %d config_change %d type %d vdev %p\n", + __func__, __LINE__, + ioread8(&dc->config_change), ioread8(&d->type), vdev); + status = ioread8(&d->status); + reinit_completion(&vdev->reset_done); + unregister_virtio_device(&vdev->vdev); + vpdev->hw_ops->free_irq(vpdev, vdev->virtio_cookie, vdev); + iowrite8(-1, &dc->h2c_vdev_db); + if (status & VIRTIO_CONFIG_S_DRIVER_OK) + wait_for_completion(&vdev->reset_done); + kfree(vdev); + iowrite8(1, &dc->guest_ack); + dev_dbg(&vpdev->dev, "%s %d guest_ack %d\n", + __func__, __LINE__, ioread8(&dc->guest_ack)); + iowrite8(-1, &d->type); + ret = 0; + } + return ret; +} + +#define REMOVE_DEVICES true + +static void _vop_scan_devices(void __iomem *dp, struct vop_device *vpdev, + bool remove, int dnode) +{ + s8 type; + unsigned int i; + struct mic_device_desc __iomem *d; + struct mic_device_ctrl __iomem *dc; + struct device *dev; + int ret; + + for (i = sizeof(struct mic_bootparam); + i < MIC_DP_SIZE; i += _vop_total_desc_size(d)) { + d = dp + i; + dc = (void __iomem *)d + _vop_aligned_desc_size(d); + /* + * This read barrier is paired with the corresponding write + * barrier on the host which is inserted before adding or + * removing a virtio device descriptor, by updating the type. + */ + rmb(); + type = ioread8(&d->type); + + /* end of list */ + if (type == 0) + break; + + if (type == -1) + continue; + + /* device already exists */ + dev = device_find_child(&vpdev->dev, (void __force *)d, + vop_match_desc); + if (dev) { + if (remove) + iowrite8(MIC_VIRTIO_PARAM_DEV_REMOVE, + &dc->config_change); + put_device(dev); + _vop_handle_config_change(d, i, vpdev); + ret = _vop_remove_device(d, i, vpdev); + if (remove) { + iowrite8(0, &dc->config_change); + iowrite8(0, &dc->guest_ack); + } + continue; + } + + /* new device */ + dev_dbg(&vpdev->dev, "%s %d Adding new virtio device %p\n", + __func__, __LINE__, d); + if (!remove) + _vop_add_device(d, i, vpdev, dnode); + } +} + +static void vop_scan_devices(struct vop_info *vi, + struct vop_device *vpdev, bool remove) +{ + void __iomem *dp = vpdev->hw_ops->get_remote_dp(vpdev); + + if (!dp) + return; + mutex_lock(&vi->vop_mutex); + _vop_scan_devices(dp, vpdev, remove, vpdev->dnode); + mutex_unlock(&vi->vop_mutex); +} + +/* + * vop_hotplug_device tries to find changes in the device page. + */ +static void vop_hotplug_devices(struct work_struct *work) +{ + struct vop_info *vi = container_of(work, struct vop_info, + hotplug_work); + + vop_scan_devices(vi, vi->vpdev, !REMOVE_DEVICES); +} + +/* + * Interrupt handler for hot plug/config changes etc. + */ +static irqreturn_t vop_extint_handler(int irq, void *data) +{ + struct vop_info *vi = data; + struct mic_bootparam __iomem *bp; + struct vop_device *vpdev = vi->vpdev; + + bp = vpdev->hw_ops->get_remote_dp(vpdev); + dev_dbg(&vpdev->dev, "%s %d hotplug work\n", + __func__, __LINE__); + vpdev->hw_ops->ack_interrupt(vpdev, ioread8(&bp->h2c_config_db)); + schedule_work(&vi->hotplug_work); + return IRQ_HANDLED; +} + +static int vop_driver_probe(struct vop_device *vpdev) +{ + struct vop_info *vi; + int rc; + + vi = kzalloc(sizeof(*vi), GFP_KERNEL); + if (!vi) { + rc = -ENOMEM; + goto exit; + } + dev_set_drvdata(&vpdev->dev, vi); + vi->vpdev = vpdev; + + mutex_init(&vi->vop_mutex); + INIT_WORK(&vi->hotplug_work, vop_hotplug_devices); + if (vpdev->dnode) { + rc = vop_host_init(vi); + if (rc < 0) + goto free; + } else { + struct mic_bootparam __iomem *bootparam; + + vop_scan_devices(vi, vpdev, !REMOVE_DEVICES); + + vi->h2c_config_db = vpdev->hw_ops->next_db(vpdev); + vi->cookie = vpdev->hw_ops->request_irq(vpdev, + vop_extint_handler, + "virtio_config_intr", + vi, vi->h2c_config_db); + if (IS_ERR(vi->cookie)) { + rc = PTR_ERR(vi->cookie); + goto free; + } + bootparam = vpdev->hw_ops->get_remote_dp(vpdev); + iowrite8(vi->h2c_config_db, &bootparam->h2c_config_db); + } + vop_init_debugfs(vi); + return 0; +free: + kfree(vi); +exit: + return rc; +} + +static void vop_driver_remove(struct vop_device *vpdev) +{ + struct vop_info *vi = dev_get_drvdata(&vpdev->dev); + + if (vpdev->dnode) { + vop_host_uninit(vi); + } else { + struct mic_bootparam __iomem *bootparam = + vpdev->hw_ops->get_remote_dp(vpdev); + if (bootparam) + iowrite8(-1, &bootparam->h2c_config_db); + vpdev->hw_ops->free_irq(vpdev, vi->cookie, vi); + flush_work(&vi->hotplug_work); + vop_scan_devices(vi, vpdev, REMOVE_DEVICES); + } + vop_exit_debugfs(vi); + kfree(vi); +} + +static struct vop_device_id id_table[] = { + { VOP_DEV_TRNSP, VOP_DEV_ANY_ID }, + { 0 }, +}; + +static struct vop_driver vop_driver = { + .driver.name = KBUILD_MODNAME, + .driver.owner = THIS_MODULE, + .id_table = id_table, + .probe = vop_driver_probe, + .remove = vop_driver_remove, +}; + +module_vop_driver(vop_driver); + +MODULE_DEVICE_TABLE(mbus, id_table); +MODULE_AUTHOR("Intel Corporation"); +MODULE_DESCRIPTION("Intel(R) Virtio Over PCIe (VOP) driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/misc/mic/host/mic_virtio.h b/drivers/misc/mic/vop/vop_main.h index a80631f..ba47ec7 100644 --- a/drivers/misc/mic/host/mic_virtio.h +++ b/drivers/misc/mic/vop/vop_main.h @@ -1,7 +1,7 @@ /* * Intel MIC Platform Software Stack (MPSS) * - * Copyright(c) 2013 Intel Corporation. + * Copyright(c) 2016 Intel Corporation. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License, version 2, as @@ -15,14 +15,21 @@ * The full GNU General Public License is included in this distribution in * the file called "COPYING". * - * Intel MIC Host driver. + * Intel Virtio Over PCIe (VOP) driver. * */ -#ifndef MIC_VIRTIO_H -#define MIC_VIRTIO_H +#ifndef _VOP_MAIN_H_ +#define _VOP_MAIN_H_ +#include <linux/vringh.h> #include <linux/virtio_config.h> -#include <linux/mic_ioctl.h> +#include <linux/virtio.h> +#include <linux/miscdevice.h> + +#include <linux/mic_common.h> +#include "../common/mic_dev.h" + +#include "../bus/vop_bus.h" /* * Note on endianness. @@ -39,38 +46,68 @@ * in guest endianness. */ +/* + * vop_info - Allocated per invocation of VOP probe + * + * @vpdev: VOP device + * @hotplug_work: Handle virtio device creation, deletion and configuration + * @cookie: Cookie received upon requesting a virtio configuration interrupt + * @h2c_config_db: The doorbell used by the peer to indicate a config change + * @vdev_list: List of "active" virtio devices injected in the peer node + * @vop_mutex: Synchronize access to the device page as well as serialize + * creation/deletion of virtio devices on the peer node + * @dp: Peer device page information + * @dbg: Debugfs entry + * @dma_ch: The DMA channel used by this transport for data transfers. + * @name: Name for this transport used in misc device creation. + * @miscdev: The misc device registered. + */ +struct vop_info { + struct vop_device *vpdev; + struct work_struct hotplug_work; + struct mic_irq *cookie; + int h2c_config_db; + struct list_head vdev_list; + struct mutex vop_mutex; + void __iomem *dp; + struct dentry *dbg; + struct dma_chan *dma_ch; + char name[16]; + struct miscdevice miscdev; +}; + /** - * struct mic_vringh - Virtio ring host information. + * struct vop_vringh - Virtio ring host information. * - * @vring: The MIC vring used for setting up user space mappings. + * @vring: The VOP vring used for setting up user space mappings. * @vrh: The host VRINGH used for accessing the card vrings. * @riov: The VRINGH read kernel IOV. * @wiov: The VRINGH write kernel IOV. + * @head: The VRINGH head index address passed to vringh_getdesc_kern(..). * @vr_mutex: Mutex for synchronizing access to the VRING. * @buf: Temporary kernel buffer used to copy in/out data * from/to the card via DMA. * @buf_da: dma address of buf. - * @mvdev: Back pointer to MIC virtio device for vringh_notify(..). - * @head: The VRINGH head index address passed to vringh_getdesc_kern(..). + * @vdev: Back pointer to VOP virtio device for vringh_notify(..). */ -struct mic_vringh { +struct vop_vringh { struct mic_vring vring; struct vringh vrh; struct vringh_kiov riov; struct vringh_kiov wiov; + u16 head; struct mutex vr_mutex; void *buf; dma_addr_t buf_da; - struct mic_vdev *mvdev; - u16 head; + struct vop_vdev *vdev; }; /** - * struct mic_vdev - Host information for a card Virtio device. + * struct vop_vdev - Host information for a card Virtio device. * * @virtio_id - Virtio device id. * @waitq - Waitqueue to allow ring3 apps to poll. - * @mdev - Back pointer to host MIC device. + * @vpdev - pointer to VOP bus device. * @poll_wake - Used for waking up threads blocked in poll. * @out_bytes - Debug stats for number of bytes copied from host to card. * @in_bytes - Debug stats for number of bytes copied from card to host. @@ -82,18 +119,23 @@ struct mic_vringh { * the transfer length did not have the required DMA alignment. * @tx_dst_unaligned - Debug stats for number of bytes copied where the * destination address on the card did not have the required DMA alignment. - * @mvr - Store per VRING data structures. + * @vvr - Store per VRING data structures. * @virtio_bh_work - Work struct used to schedule virtio bottom half handling. * @dd - Virtio device descriptor. * @dc - Virtio device control fields. * @list - List of Virtio devices. * @virtio_db - The doorbell used by the card to interrupt the host. * @virtio_cookie - The cookie returned while requesting interrupts. + * @vi: Transport information. + * @vdev_mutex: Mutex synchronizing virtio device injection, + * removal and data transfers. + * @destroy: Track if a virtio device is being destroyed. + * @deleted: The virtio device has been deleted. */ -struct mic_vdev { +struct vop_vdev { int virtio_id; wait_queue_head_t waitq; - struct mic_device *mdev; + struct vop_device *vpdev; int poll_wake; unsigned long out_bytes; unsigned long in_bytes; @@ -101,55 +143,28 @@ struct mic_vdev { unsigned long in_bytes_dma; unsigned long tx_len_unaligned; unsigned long tx_dst_unaligned; - struct mic_vringh mvr[MIC_MAX_VRINGS]; + unsigned long rx_dst_unaligned; + struct vop_vringh vvr[MIC_MAX_VRINGS]; struct work_struct virtio_bh_work; struct mic_device_desc *dd; struct mic_device_ctrl *dc; struct list_head list; int virtio_db; struct mic_irq *virtio_cookie; + struct vop_info *vi; + struct mutex vdev_mutex; + struct completion destroy; + bool deleted; }; -void mic_virtio_uninit(struct mic_device *mdev); -int mic_virtio_add_device(struct mic_vdev *mvdev, - void __user *argp); -void mic_virtio_del_device(struct mic_vdev *mvdev); -int mic_virtio_config_change(struct mic_vdev *mvdev, - void __user *argp); -int mic_virtio_copy_desc(struct mic_vdev *mvdev, - struct mic_copy_desc *request); -void mic_virtio_reset_devices(struct mic_device *mdev); -void mic_bh_handler(struct work_struct *work); - -/* Helper API to obtain the MIC PCIe device */ -static inline struct device *mic_dev(struct mic_vdev *mvdev) -{ - return &mvdev->mdev->pdev->dev; -} - -/* Helper API to check if a virtio device is initialized */ -static inline int mic_vdev_inited(struct mic_vdev *mvdev) -{ - /* Device has not been created yet */ - if (!mvdev->dd || !mvdev->dd->type) { - dev_err(mic_dev(mvdev), "%s %d err %d\n", - __func__, __LINE__, -EINVAL); - return -EINVAL; - } - - /* Device has been removed/deleted */ - if (mvdev->dd->type == -1) { - dev_err(mic_dev(mvdev), "%s %d err %d\n", - __func__, __LINE__, -ENODEV); - return -ENODEV; - } - - return 0; -} - /* Helper API to check if a virtio device is running */ -static inline bool mic_vdevup(struct mic_vdev *mvdev) +static inline bool vop_vdevup(struct vop_vdev *vdev) { - return !!mvdev->dd->status; + return !!vdev->dd->status; } + +void vop_init_debugfs(struct vop_info *vi); +void vop_exit_debugfs(struct vop_info *vi); +int vop_host_init(struct vop_info *vi); +void vop_host_uninit(struct vop_info *vi); #endif diff --git a/drivers/misc/mic/vop/vop_vringh.c b/drivers/misc/mic/vop/vop_vringh.c new file mode 100644 index 0000000..e94c7fb --- /dev/null +++ b/drivers/misc/mic/vop/vop_vringh.c @@ -0,0 +1,1165 @@ +/* + * Intel MIC Platform Software Stack (MPSS) + * + * Copyright(c) 2016 Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License, version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * The full GNU General Public License is included in this distribution in + * the file called "COPYING". + * + * Intel Virtio Over PCIe (VOP) driver. + * + */ +#include <linux/sched.h> +#include <linux/poll.h> +#include <linux/dma-mapping.h> + +#include <linux/mic_common.h> +#include "../common/mic_dev.h" + +#include <linux/mic_ioctl.h> +#include "vop_main.h" + +/* Helper API to obtain the VOP PCIe device */ +static inline struct device *vop_dev(struct vop_vdev *vdev) +{ + return vdev->vpdev->dev.parent; +} + +/* Helper API to check if a virtio device is initialized */ +static inline int vop_vdev_inited(struct vop_vdev *vdev) +{ + if (!vdev) + return -EINVAL; + /* Device has not been created yet */ + if (!vdev->dd || !vdev->dd->type) { + dev_err(vop_dev(vdev), "%s %d err %d\n", + __func__, __LINE__, -EINVAL); + return -EINVAL; + } + /* Device has been removed/deleted */ + if (vdev->dd->type == -1) { + dev_dbg(vop_dev(vdev), "%s %d err %d\n", + __func__, __LINE__, -ENODEV); + return -ENODEV; + } + return 0; +} + +static void _vop_notify(struct vringh *vrh) +{ + struct vop_vringh *vvrh = container_of(vrh, struct vop_vringh, vrh); + struct vop_vdev *vdev = vvrh->vdev; + struct vop_device *vpdev = vdev->vpdev; + s8 db = vdev->dc->h2c_vdev_db; + + if (db != -1) + vpdev->hw_ops->send_intr(vpdev, db); +} + +static void vop_virtio_init_post(struct vop_vdev *vdev) +{ + struct mic_vqconfig *vqconfig = mic_vq_config(vdev->dd); + struct vop_device *vpdev = vdev->vpdev; + int i, used_size; + + for (i = 0; i < vdev->dd->num_vq; i++) { + used_size = PAGE_ALIGN(sizeof(u16) * 3 + + sizeof(struct vring_used_elem) * + le16_to_cpu(vqconfig->num)); + if (!le64_to_cpu(vqconfig[i].used_address)) { + dev_warn(vop_dev(vdev), "used_address zero??\n"); + continue; + } + vdev->vvr[i].vrh.vring.used = + (void __force *)vpdev->hw_ops->ioremap( + vpdev, + le64_to_cpu(vqconfig[i].used_address), + used_size); + } + + vdev->dc->used_address_updated = 0; + + dev_info(vop_dev(vdev), "%s: device type %d LINKUP\n", + __func__, vdev->virtio_id); +} + +static inline void vop_virtio_device_reset(struct vop_vdev *vdev) +{ + int i; + + dev_dbg(vop_dev(vdev), "%s: status %d device type %d RESET\n", + __func__, vdev->dd->status, vdev->virtio_id); + + for (i = 0; i < vdev->dd->num_vq; i++) + /* + * Avoid lockdep false positive. The + 1 is for the vop + * mutex which is held in the reset devices code path. + */ + mutex_lock_nested(&vdev->vvr[i].vr_mutex, i + 1); + + /* 0 status means "reset" */ + vdev->dd->status = 0; + vdev->dc->vdev_reset = 0; + vdev->dc->host_ack = 1; + + for (i = 0; i < vdev->dd->num_vq; i++) { + struct vringh *vrh = &vdev->vvr[i].vrh; + + vdev->vvr[i].vring.info->avail_idx = 0; + vrh->completed = 0; + vrh->last_avail_idx = 0; + vrh->last_used_idx = 0; + } + + for (i = 0; i < vdev->dd->num_vq; i++) + mutex_unlock(&vdev->vvr[i].vr_mutex); +} + +static void vop_virtio_reset_devices(struct vop_info *vi) +{ + struct list_head *pos, *tmp; + struct vop_vdev *vdev; + + list_for_each_safe(pos, tmp, &vi->vdev_list) { + vdev = list_entry(pos, struct vop_vdev, list); + vop_virtio_device_reset(vdev); + vdev->poll_wake = 1; + wake_up(&vdev->waitq); + } +} + +static void vop_bh_handler(struct work_struct *work) +{ + struct vop_vdev *vdev = container_of(work, struct vop_vdev, + virtio_bh_work); + + if (vdev->dc->used_address_updated) + vop_virtio_init_post(vdev); + + if (vdev->dc->vdev_reset) + vop_virtio_device_reset(vdev); + + vdev->poll_wake = 1; + wake_up(&vdev->waitq); +} + +static irqreturn_t _vop_virtio_intr_handler(int irq, void *data) +{ + struct vop_vdev *vdev = data; + struct vop_device *vpdev = vdev->vpdev; + + vpdev->hw_ops->ack_interrupt(vpdev, vdev->virtio_db); + schedule_work(&vdev->virtio_bh_work); + return IRQ_HANDLED; +} + +static int vop_virtio_config_change(struct vop_vdev *vdev, void *argp) +{ + DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake); + int ret = 0, retry, i; + struct vop_device *vpdev = vdev->vpdev; + struct vop_info *vi = dev_get_drvdata(&vpdev->dev); + struct mic_bootparam *bootparam = vpdev->hw_ops->get_dp(vpdev); + s8 db = bootparam->h2c_config_db; + + mutex_lock(&vi->vop_mutex); + for (i = 0; i < vdev->dd->num_vq; i++) + mutex_lock_nested(&vdev->vvr[i].vr_mutex, i + 1); + + if (db == -1 || vdev->dd->type == -1) { + ret = -EIO; + goto exit; + } + + memcpy(mic_vq_configspace(vdev->dd), argp, vdev->dd->config_len); + vdev->dc->config_change = MIC_VIRTIO_PARAM_CONFIG_CHANGED; + vpdev->hw_ops->send_intr(vpdev, db); + + for (retry = 100; retry--;) { + ret = wait_event_timeout(wake, vdev->dc->guest_ack, + msecs_to_jiffies(100)); + if (ret) + break; + } + + dev_dbg(vop_dev(vdev), + "%s %d retry: %d\n", __func__, __LINE__, retry); + vdev->dc->config_change = 0; + vdev->dc->guest_ack = 0; +exit: + for (i = 0; i < vdev->dd->num_vq; i++) + mutex_unlock(&vdev->vvr[i].vr_mutex); + mutex_unlock(&vi->vop_mutex); + return ret; +} + +static int vop_copy_dp_entry(struct vop_vdev *vdev, + struct mic_device_desc *argp, __u8 *type, + struct mic_device_desc **devpage) +{ + struct vop_device *vpdev = vdev->vpdev; + struct mic_device_desc *devp; + struct mic_vqconfig *vqconfig; + int ret = 0, i; + bool slot_found = false; + + vqconfig = mic_vq_config(argp); + for (i = 0; i < argp->num_vq; i++) { + if (le16_to_cpu(vqconfig[i].num) > MIC_MAX_VRING_ENTRIES) { + ret = -EINVAL; + dev_err(vop_dev(vdev), "%s %d err %d\n", + __func__, __LINE__, ret); + goto exit; + } + } + + /* Find the first free device page entry */ + for (i = sizeof(struct mic_bootparam); + i < MIC_DP_SIZE - mic_total_desc_size(argp); + i += mic_total_desc_size(devp)) { + devp = vpdev->hw_ops->get_dp(vpdev) + i; + if (devp->type == 0 || devp->type == -1) { + slot_found = true; + break; + } + } + if (!slot_found) { + ret = -EINVAL; + dev_err(vop_dev(vdev), "%s %d err %d\n", + __func__, __LINE__, ret); + goto exit; + } + /* + * Save off the type before doing the memcpy. Type will be set in the + * end after completing all initialization for the new device. + */ + *type = argp->type; + argp->type = 0; + memcpy(devp, argp, mic_desc_size(argp)); + + *devpage = devp; +exit: + return ret; +} + +static void vop_init_device_ctrl(struct vop_vdev *vdev, + struct mic_device_desc *devpage) +{ + struct mic_device_ctrl *dc; + + dc = (void *)devpage + mic_aligned_desc_size(devpage); + + dc->config_change = 0; + dc->guest_ack = 0; + dc->vdev_reset = 0; + dc->host_ack = 0; + dc->used_address_updated = 0; + dc->c2h_vdev_db = -1; + dc->h2c_vdev_db = -1; + vdev->dc = dc; +} + +static int vop_virtio_add_device(struct vop_vdev *vdev, + struct mic_device_desc *argp) +{ + struct vop_info *vi = vdev->vi; + struct vop_device *vpdev = vi->vpdev; + struct mic_device_desc *dd = NULL; + struct mic_vqconfig *vqconfig; + int vr_size, i, j, ret; + u8 type = 0; + s8 db = -1; + char irqname[16]; + struct mic_bootparam *bootparam; + u16 num; + dma_addr_t vr_addr; + + bootparam = vpdev->hw_ops->get_dp(vpdev); + init_waitqueue_head(&vdev->waitq); + INIT_LIST_HEAD(&vdev->list); + vdev->vpdev = vpdev; + + ret = vop_copy_dp_entry(vdev, argp, &type, &dd); + if (ret) { + dev_err(vop_dev(vdev), "%s %d err %d\n", + __func__, __LINE__, ret); + kfree(vdev); + return ret; + } + + vop_init_device_ctrl(vdev, dd); + + vdev->dd = dd; + vdev->virtio_id = type; + vqconfig = mic_vq_config(dd); + INIT_WORK(&vdev->virtio_bh_work, vop_bh_handler); + + for (i = 0; i < dd->num_vq; i++) { + struct vop_vringh *vvr = &vdev->vvr[i]; + struct mic_vring *vr = &vdev->vvr[i].vring; + + num = le16_to_cpu(vqconfig[i].num); + mutex_init(&vvr->vr_mutex); + vr_size = PAGE_ALIGN(vring_size(num, MIC_VIRTIO_RING_ALIGN) + + sizeof(struct _mic_vring_info)); + vr->va = (void *) + __get_free_pages(GFP_KERNEL | __GFP_ZERO, + get_order(vr_size)); + if (!vr->va) { + ret = -ENOMEM; + dev_err(vop_dev(vdev), "%s %d err %d\n", + __func__, __LINE__, ret); + goto err; + } + vr->len = vr_size; + vr->info = vr->va + vring_size(num, MIC_VIRTIO_RING_ALIGN); + vr->info->magic = cpu_to_le32(MIC_MAGIC + vdev->virtio_id + i); + vr_addr = dma_map_single(&vpdev->dev, vr->va, vr_size, + DMA_BIDIRECTIONAL); + if (dma_mapping_error(&vpdev->dev, vr_addr)) { + free_pages((unsigned long)vr->va, get_order(vr_size)); + ret = -ENOMEM; + dev_err(vop_dev(vdev), "%s %d err %d\n", + __func__, __LINE__, ret); + goto err; + } + vqconfig[i].address = cpu_to_le64(vr_addr); + + vring_init(&vr->vr, num, vr->va, MIC_VIRTIO_RING_ALIGN); + ret = vringh_init_kern(&vvr->vrh, + *(u32 *)mic_vq_features(vdev->dd), + num, false, vr->vr.desc, vr->vr.avail, + vr->vr.used); + if (ret) { + dev_err(vop_dev(vdev), "%s %d err %d\n", + __func__, __LINE__, ret); + goto err; + } + vringh_kiov_init(&vvr->riov, NULL, 0); + vringh_kiov_init(&vvr->wiov, NULL, 0); + vvr->head = USHRT_MAX; + vvr->vdev = vdev; + vvr->vrh.notify = _vop_notify; + dev_dbg(&vpdev->dev, + "%s %d index %d va %p info %p vr_size 0x%x\n", + __func__, __LINE__, i, vr->va, vr->info, vr_size); + vvr->buf = (void *)__get_free_pages(GFP_KERNEL, + get_order(VOP_INT_DMA_BUF_SIZE)); + vvr->buf_da = dma_map_single(&vpdev->dev, + vvr->buf, VOP_INT_DMA_BUF_SIZE, + DMA_BIDIRECTIONAL); + } + + snprintf(irqname, sizeof(irqname), "vop%dvirtio%d", vpdev->index, + vdev->virtio_id); + vdev->virtio_db = vpdev->hw_ops->next_db(vpdev); + vdev->virtio_cookie = vpdev->hw_ops->request_irq(vpdev, + _vop_virtio_intr_handler, irqname, vdev, + vdev->virtio_db); + if (IS_ERR(vdev->virtio_cookie)) { + ret = PTR_ERR(vdev->virtio_cookie); + dev_dbg(&vpdev->dev, "request irq failed\n"); + goto err; + } + + vdev->dc->c2h_vdev_db = vdev->virtio_db; + + /* + * Order the type update with previous stores. This write barrier + * is paired with the corresponding read barrier before the uncached + * system memory read of the type, on the card while scanning the + * device page. + */ + smp_wmb(); + dd->type = type; + argp->type = type; + + if (bootparam) { + db = bootparam->h2c_config_db; + if (db != -1) + vpdev->hw_ops->send_intr(vpdev, db); + } + dev_dbg(&vpdev->dev, "Added virtio id %d db %d\n", dd->type, db); + return 0; +err: + vqconfig = mic_vq_config(dd); + for (j = 0; j < i; j++) { + struct vop_vringh *vvr = &vdev->vvr[j]; + + dma_unmap_single(&vpdev->dev, le64_to_cpu(vqconfig[j].address), + vvr->vring.len, DMA_BIDIRECTIONAL); + free_pages((unsigned long)vvr->vring.va, + get_order(vvr->vring.len)); + } + return ret; +} + +static void vop_dev_remove(struct vop_info *pvi, struct mic_device_ctrl *devp, + struct vop_device *vpdev) +{ + struct mic_bootparam *bootparam = vpdev->hw_ops->get_dp(vpdev); + s8 db; + int ret, retry; + DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wake); + + devp->config_change = MIC_VIRTIO_PARAM_DEV_REMOVE; + db = bootparam->h2c_config_db; + if (db != -1) + vpdev->hw_ops->send_intr(vpdev, db); + else + goto done; + for (retry = 15; retry--;) { + ret = wait_event_timeout(wake, devp->guest_ack, + msecs_to_jiffies(1000)); + if (ret) + break; + } +done: + devp->config_change = 0; + devp->guest_ack = 0; +} + +static void vop_virtio_del_device(struct vop_vdev *vdev) +{ + struct vop_info *vi = vdev->vi; + struct vop_device *vpdev = vdev->vpdev; + int i; + struct mic_vqconfig *vqconfig; + struct mic_bootparam *bootparam = vpdev->hw_ops->get_dp(vpdev); + + if (!bootparam) + goto skip_hot_remove; + vop_dev_remove(vi, vdev->dc, vpdev); +skip_hot_remove: + vpdev->hw_ops->free_irq(vpdev, vdev->virtio_cookie, vdev); + flush_work(&vdev->virtio_bh_work); + vqconfig = mic_vq_config(vdev->dd); + for (i = 0; i < vdev->dd->num_vq; i++) { + struct vop_vringh *vvr = &vdev->vvr[i]; + + dma_unmap_single(&vpdev->dev, + vvr->buf_da, VOP_INT_DMA_BUF_SIZE, + DMA_BIDIRECTIONAL); + free_pages((unsigned long)vvr->buf, + get_order(VOP_INT_DMA_BUF_SIZE)); + vringh_kiov_cleanup(&vvr->riov); + vringh_kiov_cleanup(&vvr->wiov); + dma_unmap_single(&vpdev->dev, le64_to_cpu(vqconfig[i].address), + vvr->vring.len, DMA_BIDIRECTIONAL); + free_pages((unsigned long)vvr->vring.va, + get_order(vvr->vring.len)); + } + /* + * Order the type update with previous stores. This write barrier + * is paired with the corresponding read barrier before the uncached + * system memory read of the type, on the card while scanning the + * device page. + */ + smp_wmb(); + vdev->dd->type = -1; +} + +/* + * vop_sync_dma - Wrapper for synchronous DMAs. + * + * @dev - The address of the pointer to the device instance used + * for DMA registration. + * @dst - destination DMA address. + * @src - source DMA address. + * @len - size of the transfer. + * + * Return DMA_SUCCESS on success + */ +static int vop_sync_dma(struct vop_vdev *vdev, dma_addr_t dst, dma_addr_t src, + size_t len) +{ + int err = 0; + struct dma_device *ddev; + struct dma_async_tx_descriptor *tx; + struct vop_info *vi = dev_get_drvdata(&vdev->vpdev->dev); + struct dma_chan *vop_ch = vi->dma_ch; + + if (!vop_ch) { + err = -EBUSY; + goto error; + } + ddev = vop_ch->device; + tx = ddev->device_prep_dma_memcpy(vop_ch, dst, src, len, + DMA_PREP_FENCE); + if (!tx) { + err = -ENOMEM; + goto error; + } else { + dma_cookie_t cookie; + + cookie = tx->tx_submit(tx); + if (dma_submit_error(cookie)) { + err = -ENOMEM; + goto error; + } + dma_async_issue_pending(vop_ch); + err = dma_sync_wait(vop_ch, cookie); + } +error: + if (err) + dev_err(&vi->vpdev->dev, "%s %d err %d\n", + __func__, __LINE__, err); + return err; +} + +#define VOP_USE_DMA true + +/* + * Initiates the copies across the PCIe bus from card memory to a user + * space buffer. When transfers are done using DMA, source/destination + * addresses and transfer length must follow the alignment requirements of + * the MIC DMA engine. + */ +static int vop_virtio_copy_to_user(struct vop_vdev *vdev, void __user *ubuf, + size_t len, u64 daddr, size_t dlen, + int vr_idx) +{ + struct vop_device *vpdev = vdev->vpdev; + void __iomem *dbuf = vpdev->hw_ops->ioremap(vpdev, daddr, len); + struct vop_vringh *vvr = &vdev->vvr[vr_idx]; + struct vop_info *vi = dev_get_drvdata(&vpdev->dev); + size_t dma_alignment = 1 << vi->dma_ch->device->copy_align; + bool x200 = is_dma_copy_aligned(vi->dma_ch->device, 1, 1, 1); + size_t dma_offset, partlen; + int err; + + if (!VOP_USE_DMA) { + if (copy_to_user(ubuf, (void __force *)dbuf, len)) { + err = -EFAULT; + dev_err(vop_dev(vdev), "%s %d err %d\n", + __func__, __LINE__, err); + goto err; + } + vdev->in_bytes += len; + err = 0; + goto err; + } + + dma_offset = daddr - round_down(daddr, dma_alignment); + daddr -= dma_offset; + len += dma_offset; + /* + * X100 uses DMA addresses as seen by the card so adding + * the aperture base is not required for DMA. However x200 + * requires DMA addresses to be an offset into the bar so + * add the aperture base for x200. + */ + if (x200) + daddr += vpdev->aper->pa; + while (len) { + partlen = min_t(size_t, len, VOP_INT_DMA_BUF_SIZE); + err = vop_sync_dma(vdev, vvr->buf_da, daddr, + ALIGN(partlen, dma_alignment)); + if (err) { + dev_err(vop_dev(vdev), "%s %d err %d\n", + __func__, __LINE__, err); + goto err; + } + if (copy_to_user(ubuf, vvr->buf + dma_offset, + partlen - dma_offset)) { + err = -EFAULT; + dev_err(vop_dev(vdev), "%s %d err %d\n", + __func__, __LINE__, err); + goto err; + } + daddr += partlen; + ubuf += partlen; + dbuf += partlen; + vdev->in_bytes_dma += partlen; + vdev->in_bytes += partlen; + len -= partlen; + dma_offset = 0; + } + err = 0; +err: + vpdev->hw_ops->iounmap(vpdev, dbuf); + dev_dbg(vop_dev(vdev), + "%s: ubuf %p dbuf %p len 0x%lx vr_idx 0x%x\n", + __func__, ubuf, dbuf, len, vr_idx); + return err; +} + +/* + * Initiates copies across the PCIe bus from a user space buffer to card + * memory. When transfers are done using DMA, source/destination addresses + * and transfer length must follow the alignment requirements of the MIC + * DMA engine. + */ +static int vop_virtio_copy_from_user(struct vop_vdev *vdev, void __user *ubuf, + size_t len, u64 daddr, size_t dlen, + int vr_idx) +{ + struct vop_device *vpdev = vdev->vpdev; + void __iomem *dbuf = vpdev->hw_ops->ioremap(vpdev, daddr, len); + struct vop_vringh *vvr = &vdev->vvr[vr_idx]; + struct vop_info *vi = dev_get_drvdata(&vdev->vpdev->dev); + size_t dma_alignment = 1 << vi->dma_ch->device->copy_align; + bool x200 = is_dma_copy_aligned(vi->dma_ch->device, 1, 1, 1); + size_t partlen; + bool dma = VOP_USE_DMA; + int err = 0; + + if (daddr & (dma_alignment - 1)) { + vdev->tx_dst_unaligned += len; + dma = false; + } else if (ALIGN(len, dma_alignment) > dlen) { + vdev->tx_len_unaligned += len; + dma = false; + } + + if (!dma) + goto memcpy; + + /* + * X100 uses DMA addresses as seen by the card so adding + * the aperture base is not required for DMA. However x200 + * requires DMA addresses to be an offset into the bar so + * add the aperture base for x200. + */ + if (x200) + daddr += vpdev->aper->pa; + while (len) { + partlen = min_t(size_t, len, VOP_INT_DMA_BUF_SIZE); + + if (copy_from_user(vvr->buf, ubuf, partlen)) { + err = -EFAULT; + dev_err(vop_dev(vdev), "%s %d err %d\n", + __func__, __LINE__, err); + goto err; + } + err = vop_sync_dma(vdev, daddr, vvr->buf_da, + ALIGN(partlen, dma_alignment)); + if (err) { + dev_err(vop_dev(vdev), "%s %d err %d\n", + __func__, __LINE__, err); + goto err; + } + daddr += partlen; + ubuf += partlen; + dbuf += partlen; + vdev->out_bytes_dma += partlen; + vdev->out_bytes += partlen; + len -= partlen; + } +memcpy: + /* + * We are copying to IO below and should ideally use something + * like copy_from_user_toio(..) if it existed. + */ + if (copy_from_user((void __force *)dbuf, ubuf, len)) { + err = -EFAULT; + dev_err(vop_dev(vdev), "%s %d err %d\n", + __func__, __LINE__, err); + goto err; + } + vdev->out_bytes += len; + err = 0; +err: + vpdev->hw_ops->iounmap(vpdev, dbuf); + dev_dbg(vop_dev(vdev), + "%s: ubuf %p dbuf %p len 0x%lx vr_idx 0x%x\n", + __func__, ubuf, dbuf, len, vr_idx); + return err; +} + +#define MIC_VRINGH_READ true + +/* Determine the total number of bytes consumed in a VRINGH KIOV */ +static inline u32 vop_vringh_iov_consumed(struct vringh_kiov *iov) +{ + int i; + u32 total = iov->consumed; + + for (i = 0; i < iov->i; i++) + total += iov->iov[i].iov_len; + return total; +} + +/* + * Traverse the VRINGH KIOV and issue the APIs to trigger the copies. + * This API is heavily based on the vringh_iov_xfer(..) implementation + * in vringh.c. The reason we cannot reuse vringh_iov_pull_kern(..) + * and vringh_iov_push_kern(..) directly is because there is no + * way to override the VRINGH xfer(..) routines as of v3.10. + */ +static int vop_vringh_copy(struct vop_vdev *vdev, struct vringh_kiov *iov, + void __user *ubuf, size_t len, bool read, int vr_idx, + size_t *out_len) +{ + int ret = 0; + size_t partlen, tot_len = 0; + + while (len && iov->i < iov->used) { + struct kvec *kiov = &iov->iov[iov->i]; + + partlen = min(kiov->iov_len, len); + if (read) + ret = vop_virtio_copy_to_user(vdev, ubuf, partlen, + (u64)kiov->iov_base, + kiov->iov_len, + vr_idx); + else + ret = vop_virtio_copy_from_user(vdev, ubuf, partlen, + (u64)kiov->iov_base, + kiov->iov_len, + vr_idx); + if (ret) { + dev_err(vop_dev(vdev), "%s %d err %d\n", + __func__, __LINE__, ret); + break; + } + len -= partlen; + ubuf += partlen; + tot_len += partlen; + iov->consumed += partlen; + kiov->iov_len -= partlen; + kiov->iov_base += partlen; + if (!kiov->iov_len) { + /* Fix up old iov element then increment. */ + kiov->iov_len = iov->consumed; + kiov->iov_base -= iov->consumed; + + iov->consumed = 0; + iov->i++; + } + } + *out_len = tot_len; + return ret; +} + +/* + * Use the standard VRINGH infrastructure in the kernel to fetch new + * descriptors, initiate the copies and update the used ring. + */ +static int _vop_virtio_copy(struct vop_vdev *vdev, struct mic_copy_desc *copy) +{ + int ret = 0; + u32 iovcnt = copy->iovcnt; + struct iovec iov; + struct iovec __user *u_iov = copy->iov; + void __user *ubuf = NULL; + struct vop_vringh *vvr = &vdev->vvr[copy->vr_idx]; + struct vringh_kiov *riov = &vvr->riov; + struct vringh_kiov *wiov = &vvr->wiov; + struct vringh *vrh = &vvr->vrh; + u16 *head = &vvr->head; + struct mic_vring *vr = &vvr->vring; + size_t len = 0, out_len; + + copy->out_len = 0; + /* Fetch a new IOVEC if all previous elements have been processed */ + if (riov->i == riov->used && wiov->i == wiov->used) { + ret = vringh_getdesc_kern(vrh, riov, wiov, + head, GFP_KERNEL); + /* Check if there are available descriptors */ + if (ret <= 0) + return ret; + } + while (iovcnt) { + if (!len) { + /* Copy over a new iovec from user space. */ + ret = copy_from_user(&iov, u_iov, sizeof(*u_iov)); + if (ret) { + ret = -EINVAL; + dev_err(vop_dev(vdev), "%s %d err %d\n", + __func__, __LINE__, ret); + break; + } + len = iov.iov_len; + ubuf = iov.iov_base; + } + /* Issue all the read descriptors first */ + ret = vop_vringh_copy(vdev, riov, ubuf, len, + MIC_VRINGH_READ, copy->vr_idx, &out_len); + if (ret) { + dev_err(vop_dev(vdev), "%s %d err %d\n", + __func__, __LINE__, ret); + break; + } + len -= out_len; + ubuf += out_len; + copy->out_len += out_len; + /* Issue the write descriptors next */ + ret = vop_vringh_copy(vdev, wiov, ubuf, len, + !MIC_VRINGH_READ, copy->vr_idx, &out_len); + if (ret) { + dev_err(vop_dev(vdev), "%s %d err %d\n", + __func__, __LINE__, ret); + break; + } + len -= out_len; + ubuf += out_len; + copy->out_len += out_len; + if (!len) { + /* One user space iovec is now completed */ + iovcnt--; + u_iov++; + } + /* Exit loop if all elements in KIOVs have been processed. */ + if (riov->i == riov->used && wiov->i == wiov->used) + break; + } + /* + * Update the used ring if a descriptor was available and some data was + * copied in/out and the user asked for a used ring update. + */ + if (*head != USHRT_MAX && copy->out_len && copy->update_used) { + u32 total = 0; + + /* Determine the total data consumed */ + total += vop_vringh_iov_consumed(riov); + total += vop_vringh_iov_consumed(wiov); + vringh_complete_kern(vrh, *head, total); + *head = USHRT_MAX; + if (vringh_need_notify_kern(vrh) > 0) + vringh_notify(vrh); + vringh_kiov_cleanup(riov); + vringh_kiov_cleanup(wiov); + /* Update avail idx for user space */ + vr->info->avail_idx = vrh->last_avail_idx; + } + return ret; +} + +static inline int vop_verify_copy_args(struct vop_vdev *vdev, + struct mic_copy_desc *copy) +{ + if (!vdev || copy->vr_idx >= vdev->dd->num_vq) + return -EINVAL; + return 0; +} + +/* Copy a specified number of virtio descriptors in a chain */ +static int vop_virtio_copy_desc(struct vop_vdev *vdev, + struct mic_copy_desc *copy) +{ + int err; + struct vop_vringh *vvr; + + err = vop_verify_copy_args(vdev, copy); + if (err) + return err; + + vvr = &vdev->vvr[copy->vr_idx]; + mutex_lock(&vvr->vr_mutex); + if (!vop_vdevup(vdev)) { + err = -ENODEV; + dev_err(vop_dev(vdev), "%s %d err %d\n", + __func__, __LINE__, err); + goto err; + } + err = _vop_virtio_copy(vdev, copy); + if (err) { + dev_err(vop_dev(vdev), "%s %d err %d\n", + __func__, __LINE__, err); + } +err: + mutex_unlock(&vvr->vr_mutex); + return err; +} + +static int vop_open(struct inode *inode, struct file *f) +{ + struct vop_vdev *vdev; + struct vop_info *vi = container_of(f->private_data, + struct vop_info, miscdev); + + vdev = kzalloc(sizeof(*vdev), GFP_KERNEL); + if (!vdev) + return -ENOMEM; + vdev->vi = vi; + mutex_init(&vdev->vdev_mutex); + f->private_data = vdev; + init_completion(&vdev->destroy); + complete(&vdev->destroy); + return 0; +} + +static int vop_release(struct inode *inode, struct file *f) +{ + struct vop_vdev *vdev = f->private_data, *vdev_tmp; + struct vop_info *vi = vdev->vi; + struct list_head *pos, *tmp; + bool found = false; + + mutex_lock(&vdev->vdev_mutex); + if (vdev->deleted) + goto unlock; + mutex_lock(&vi->vop_mutex); + list_for_each_safe(pos, tmp, &vi->vdev_list) { + vdev_tmp = list_entry(pos, struct vop_vdev, list); + if (vdev == vdev_tmp) { + vop_virtio_del_device(vdev); + list_del(pos); + found = true; + break; + } + } + mutex_unlock(&vi->vop_mutex); +unlock: + mutex_unlock(&vdev->vdev_mutex); + if (!found) + wait_for_completion(&vdev->destroy); + f->private_data = NULL; + kfree(vdev); + return 0; +} + +static long vop_ioctl(struct file *f, unsigned int cmd, unsigned long arg) +{ + struct vop_vdev *vdev = f->private_data; + struct vop_info *vi = vdev->vi; + void __user *argp = (void __user *)arg; + int ret; + + switch (cmd) { + case MIC_VIRTIO_ADD_DEVICE: + { + struct mic_device_desc dd, *dd_config; + + if (copy_from_user(&dd, argp, sizeof(dd))) + return -EFAULT; + + if (mic_aligned_desc_size(&dd) > MIC_MAX_DESC_BLK_SIZE || + dd.num_vq > MIC_MAX_VRINGS) + return -EINVAL; + + dd_config = kzalloc(mic_desc_size(&dd), GFP_KERNEL); + if (!dd_config) + return -ENOMEM; + if (copy_from_user(dd_config, argp, mic_desc_size(&dd))) { + ret = -EFAULT; + goto free_ret; + } + mutex_lock(&vdev->vdev_mutex); + mutex_lock(&vi->vop_mutex); + ret = vop_virtio_add_device(vdev, dd_config); + if (ret) + goto unlock_ret; + list_add_tail(&vdev->list, &vi->vdev_list); +unlock_ret: + mutex_unlock(&vi->vop_mutex); + mutex_unlock(&vdev->vdev_mutex); +free_ret: + kfree(dd_config); + return ret; + } + case MIC_VIRTIO_COPY_DESC: + { + struct mic_copy_desc copy; + + mutex_lock(&vdev->vdev_mutex); + ret = vop_vdev_inited(vdev); + if (ret) + goto _unlock_ret; + + if (copy_from_user(©, argp, sizeof(copy))) { + ret = -EFAULT; + goto _unlock_ret; + } + + ret = vop_virtio_copy_desc(vdev, ©); + if (ret < 0) + goto _unlock_ret; + if (copy_to_user( + &((struct mic_copy_desc __user *)argp)->out_len, + ©.out_len, sizeof(copy.out_len))) + ret = -EFAULT; +_unlock_ret: + mutex_unlock(&vdev->vdev_mutex); + return ret; + } + case MIC_VIRTIO_CONFIG_CHANGE: + { + void *buf; + + mutex_lock(&vdev->vdev_mutex); + ret = vop_vdev_inited(vdev); + if (ret) + goto __unlock_ret; + buf = kzalloc(vdev->dd->config_len, GFP_KERNEL); + if (!buf) { + ret = -ENOMEM; + goto __unlock_ret; + } + if (copy_from_user(buf, argp, vdev->dd->config_len)) { + ret = -EFAULT; + goto done; + } + ret = vop_virtio_config_change(vdev, buf); +done: + kfree(buf); +__unlock_ret: + mutex_unlock(&vdev->vdev_mutex); + return ret; + } + default: + return -ENOIOCTLCMD; + }; + return 0; +} + +/* + * We return POLLIN | POLLOUT from poll when new buffers are enqueued, and + * not when previously enqueued buffers may be available. This means that + * in the card->host (TX) path, when userspace is unblocked by poll it + * must drain all available descriptors or it can stall. + */ +static unsigned int vop_poll(struct file *f, poll_table *wait) +{ + struct vop_vdev *vdev = f->private_data; + int mask = 0; + + mutex_lock(&vdev->vdev_mutex); + if (vop_vdev_inited(vdev)) { + mask = POLLERR; + goto done; + } + poll_wait(f, &vdev->waitq, wait); + if (vop_vdev_inited(vdev)) { + mask = POLLERR; + } else if (vdev->poll_wake) { + vdev->poll_wake = 0; + mask = POLLIN | POLLOUT; + } +done: + mutex_unlock(&vdev->vdev_mutex); + return mask; +} + +static inline int +vop_query_offset(struct vop_vdev *vdev, unsigned long offset, + unsigned long *size, unsigned long *pa) +{ + struct vop_device *vpdev = vdev->vpdev; + unsigned long start = MIC_DP_SIZE; + int i; + + /* + * MMAP interface is as follows: + * offset region + * 0x0 virtio device_page + * 0x1000 first vring + * 0x1000 + size of 1st vring second vring + * .... + */ + if (!offset) { + *pa = virt_to_phys(vpdev->hw_ops->get_dp(vpdev)); + *size = MIC_DP_SIZE; + return 0; + } + + for (i = 0; i < vdev->dd->num_vq; i++) { + struct vop_vringh *vvr = &vdev->vvr[i]; + + if (offset == start) { + *pa = virt_to_phys(vvr->vring.va); + *size = vvr->vring.len; + return 0; + } + start += vvr->vring.len; + } + return -1; +} + +/* + * Maps the device page and virtio rings to user space for readonly access. + */ +static int vop_mmap(struct file *f, struct vm_area_struct *vma) +{ + struct vop_vdev *vdev = f->private_data; + unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; + unsigned long pa, size = vma->vm_end - vma->vm_start, size_rem = size; + int i, err; + + err = vop_vdev_inited(vdev); + if (err) + goto ret; + if (vma->vm_flags & VM_WRITE) { + err = -EACCES; + goto ret; + } + while (size_rem) { + i = vop_query_offset(vdev, offset, &size, &pa); + if (i < 0) { + err = -EINVAL; + goto ret; + } + err = remap_pfn_range(vma, vma->vm_start + offset, + pa >> PAGE_SHIFT, size, + vma->vm_page_prot); + if (err) + goto ret; + size_rem -= size; + offset += size; + } +ret: + return err; +} + +static const struct file_operations vop_fops = { + .open = vop_open, + .release = vop_release, + .unlocked_ioctl = vop_ioctl, + .poll = vop_poll, + .mmap = vop_mmap, + .owner = THIS_MODULE, +}; + +int vop_host_init(struct vop_info *vi) +{ + int rc; + struct miscdevice *mdev; + struct vop_device *vpdev = vi->vpdev; + + INIT_LIST_HEAD(&vi->vdev_list); + vi->dma_ch = vpdev->dma_ch; + mdev = &vi->miscdev; + mdev->minor = MISC_DYNAMIC_MINOR; + snprintf(vi->name, sizeof(vi->name), "vop_virtio%d", vpdev->index); + mdev->name = vi->name; + mdev->fops = &vop_fops; + mdev->parent = &vpdev->dev; + + rc = misc_register(mdev); + if (rc) + dev_err(&vpdev->dev, "%s failed rc %d\n", __func__, rc); + return rc; +} + +void vop_host_uninit(struct vop_info *vi) +{ + struct list_head *pos, *tmp; + struct vop_vdev *vdev; + + mutex_lock(&vi->vop_mutex); + vop_virtio_reset_devices(vi); + list_for_each_safe(pos, tmp, &vi->vdev_list) { + vdev = list_entry(pos, struct vop_vdev, list); + list_del(pos); + reinit_completion(&vdev->destroy); + mutex_unlock(&vi->vop_mutex); + mutex_lock(&vdev->vdev_mutex); + vop_virtio_del_device(vdev); + vdev->deleted = true; + mutex_unlock(&vdev->vdev_mutex); + complete(&vdev->destroy); + mutex_lock(&vi->vop_mutex); + } + mutex_unlock(&vi->vop_mutex); + misc_deregister(&vi->miscdev); +} diff --git a/drivers/misc/panel.c b/drivers/misc/panel.c new file mode 100644 index 0000000..6030ac5 --- /dev/null +++ b/drivers/misc/panel.c @@ -0,0 +1,2438 @@ +/* + * Front panel driver for Linux + * Copyright (C) 2000-2008, Willy Tarreau <w@1wt.eu> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + * This code drives an LCD module (/dev/lcd), and a keypad (/dev/keypad) + * connected to a parallel printer port. + * + * The LCD module may either be an HD44780-like 8-bit parallel LCD, or a 1-bit + * serial module compatible with Samsung's KS0074. The pins may be connected in + * any combination, everything is programmable. + * + * The keypad consists in a matrix of push buttons connecting input pins to + * data output pins or to the ground. The combinations have to be hard-coded + * in the driver, though several profiles exist and adding new ones is easy. + * + * Several profiles are provided for commonly found LCD+keypad modules on the + * market, such as those found in Nexcom's appliances. + * + * FIXME: + * - the initialization/deinitialization process is very dirty and should + * be rewritten. It may even be buggy. + * + * TODO: + * - document 24 keys keyboard (3 rows of 8 cols, 32 diodes + 2 inputs) + * - make the LCD a part of a virtual screen of Vx*Vy + * - make the inputs list smp-safe + * - change the keyboard to a double mapping : signals -> key_id -> values + * so that applications can change values without knowing signals + * + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/module.h> + +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/miscdevice.h> +#include <linux/slab.h> +#include <linux/ioport.h> +#include <linux/fcntl.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/ctype.h> +#include <linux/parport.h> +#include <linux/list.h> +#include <linux/notifier.h> +#include <linux/reboot.h> +#include <generated/utsrelease.h> + +#include <linux/io.h> +#include <linux/uaccess.h> + +#define LCD_MINOR 156 +#define KEYPAD_MINOR 185 + +#define PANEL_VERSION "0.9.5" + +#define LCD_MAXBYTES 256 /* max burst write */ + +#define KEYPAD_BUFFER 64 + +/* poll the keyboard this every second */ +#define INPUT_POLL_TIME (HZ / 50) +/* a key starts to repeat after this times INPUT_POLL_TIME */ +#define KEYPAD_REP_START (10) +/* a key repeats this times INPUT_POLL_TIME */ +#define KEYPAD_REP_DELAY (2) + +/* keep the light on this times INPUT_POLL_TIME for each flash */ +#define FLASH_LIGHT_TEMPO (200) + +/* converts an r_str() input to an active high, bits string : 000BAOSE */ +#define PNL_PINPUT(a) ((((unsigned char)(a)) ^ 0x7F) >> 3) + +#define PNL_PBUSY 0x80 /* inverted input, active low */ +#define PNL_PACK 0x40 /* direct input, active low */ +#define PNL_POUTPA 0x20 /* direct input, active high */ +#define PNL_PSELECD 0x10 /* direct input, active high */ +#define PNL_PERRORP 0x08 /* direct input, active low */ + +#define PNL_PBIDIR 0x20 /* bi-directional ports */ +/* high to read data in or-ed with data out */ +#define PNL_PINTEN 0x10 +#define PNL_PSELECP 0x08 /* inverted output, active low */ +#define PNL_PINITP 0x04 /* direct output, active low */ +#define PNL_PAUTOLF 0x02 /* inverted output, active low */ +#define PNL_PSTROBE 0x01 /* inverted output */ + +#define PNL_PD0 0x01 +#define PNL_PD1 0x02 +#define PNL_PD2 0x04 +#define PNL_PD3 0x08 +#define PNL_PD4 0x10 +#define PNL_PD5 0x20 +#define PNL_PD6 0x40 +#define PNL_PD7 0x80 + +#define PIN_NONE 0 +#define PIN_STROBE 1 +#define PIN_D0 2 +#define PIN_D1 3 +#define PIN_D2 4 +#define PIN_D3 5 +#define PIN_D4 6 +#define PIN_D5 7 +#define PIN_D6 8 +#define PIN_D7 9 +#define PIN_AUTOLF 14 +#define PIN_INITP 16 +#define PIN_SELECP 17 +#define PIN_NOT_SET 127 + +#define LCD_FLAG_S 0x0001 +#define LCD_FLAG_ID 0x0002 +#define LCD_FLAG_B 0x0004 /* blink on */ +#define LCD_FLAG_C 0x0008 /* cursor on */ +#define LCD_FLAG_D 0x0010 /* display on */ +#define LCD_FLAG_F 0x0020 /* large font mode */ +#define LCD_FLAG_N 0x0040 /* 2-rows mode */ +#define LCD_FLAG_L 0x0080 /* backlight enabled */ + +/* LCD commands */ +#define LCD_CMD_DISPLAY_CLEAR 0x01 /* Clear entire display */ + +#define LCD_CMD_ENTRY_MODE 0x04 /* Set entry mode */ +#define LCD_CMD_CURSOR_INC 0x02 /* Increment cursor */ + +#define LCD_CMD_DISPLAY_CTRL 0x08 /* Display control */ +#define LCD_CMD_DISPLAY_ON 0x04 /* Set display on */ +#define LCD_CMD_CURSOR_ON 0x02 /* Set cursor on */ +#define LCD_CMD_BLINK_ON 0x01 /* Set blink on */ + +#define LCD_CMD_SHIFT 0x10 /* Shift cursor/display */ +#define LCD_CMD_DISPLAY_SHIFT 0x08 /* Shift display instead of cursor */ +#define LCD_CMD_SHIFT_RIGHT 0x04 /* Shift display/cursor to the right */ + +#define LCD_CMD_FUNCTION_SET 0x20 /* Set function */ +#define LCD_CMD_DATA_LEN_8BITS 0x10 /* Set data length to 8 bits */ +#define LCD_CMD_TWO_LINES 0x08 /* Set to two display lines */ +#define LCD_CMD_FONT_5X10_DOTS 0x04 /* Set char font to 5x10 dots */ + +#define LCD_CMD_SET_CGRAM_ADDR 0x40 /* Set char generator RAM address */ + +#define LCD_CMD_SET_DDRAM_ADDR 0x80 /* Set display data RAM address */ + +#define LCD_ESCAPE_LEN 24 /* max chars for LCD escape command */ +#define LCD_ESCAPE_CHAR 27 /* use char 27 for escape command */ + +#define NOT_SET -1 + +/* macros to simplify use of the parallel port */ +#define r_ctr(x) (parport_read_control((x)->port)) +#define r_dtr(x) (parport_read_data((x)->port)) +#define r_str(x) (parport_read_status((x)->port)) +#define w_ctr(x, y) (parport_write_control((x)->port, (y))) +#define w_dtr(x, y) (parport_write_data((x)->port, (y))) + +/* this defines which bits are to be used and which ones to be ignored */ +/* logical or of the output bits involved in the scan matrix */ +static __u8 scan_mask_o; +/* logical or of the input bits involved in the scan matrix */ +static __u8 scan_mask_i; + +enum input_type { + INPUT_TYPE_STD, + INPUT_TYPE_KBD, +}; + +enum input_state { + INPUT_ST_LOW, + INPUT_ST_RISING, + INPUT_ST_HIGH, + INPUT_ST_FALLING, +}; + +struct logical_input { + struct list_head list; + __u64 mask; + __u64 value; + enum input_type type; + enum input_state state; + __u8 rise_time, fall_time; + __u8 rise_timer, fall_timer, high_timer; + + union { + struct { /* valid when type == INPUT_TYPE_STD */ + void (*press_fct)(int); + void (*release_fct)(int); + int press_data; + int release_data; + } std; + struct { /* valid when type == INPUT_TYPE_KBD */ + /* strings can be non null-terminated */ + char press_str[sizeof(void *) + sizeof(int)]; + char repeat_str[sizeof(void *) + sizeof(int)]; + char release_str[sizeof(void *) + sizeof(int)]; + } kbd; + } u; +}; + +static LIST_HEAD(logical_inputs); /* list of all defined logical inputs */ + +/* physical contacts history + * Physical contacts are a 45 bits string of 9 groups of 5 bits each. + * The 8 lower groups correspond to output bits 0 to 7, and the 9th group + * corresponds to the ground. + * Within each group, bits are stored in the same order as read on the port : + * BAPSE (busy=4, ack=3, paper empty=2, select=1, error=0). + * So, each __u64 is represented like this : + * 0000000000000000000BAPSEBAPSEBAPSEBAPSEBAPSEBAPSEBAPSEBAPSEBAPSE + * <-----unused------><gnd><d07><d06><d05><d04><d03><d02><d01><d00> + */ + +/* what has just been read from the I/O ports */ +static __u64 phys_read; +/* previous phys_read */ +static __u64 phys_read_prev; +/* stabilized phys_read (phys_read|phys_read_prev) */ +static __u64 phys_curr; +/* previous phys_curr */ +static __u64 phys_prev; +/* 0 means that at least one logical signal needs be computed */ +static char inputs_stable; + +/* these variables are specific to the keypad */ +static struct { + bool enabled; +} keypad; + +static char keypad_buffer[KEYPAD_BUFFER]; +static int keypad_buflen; +static int keypad_start; +static char keypressed; +static wait_queue_head_t keypad_read_wait; + +/* lcd-specific variables */ +static struct { + bool enabled; + bool initialized; + bool must_clear; + + int height; + int width; + int bwidth; + int hwidth; + int charset; + int proto; + int light_tempo; + + /* TODO: use union here? */ + struct { + int e; + int rs; + int rw; + int cl; + int da; + int bl; + } pins; + + /* contains the LCD config state */ + unsigned long int flags; + + /* Contains the LCD X and Y offset */ + struct { + unsigned long int x; + unsigned long int y; + } addr; + + /* Current escape sequence and it's length or -1 if outside */ + struct { + char buf[LCD_ESCAPE_LEN + 1]; + int len; + } esc_seq; +} lcd; + +/* Needed only for init */ +static int selected_lcd_type = NOT_SET; + +/* + * Bit masks to convert LCD signals to parallel port outputs. + * _d_ are values for data port, _c_ are for control port. + * [0] = signal OFF, [1] = signal ON, [2] = mask + */ +#define BIT_CLR 0 +#define BIT_SET 1 +#define BIT_MSK 2 +#define BIT_STATES 3 +/* + * one entry for each bit on the LCD + */ +#define LCD_BIT_E 0 +#define LCD_BIT_RS 1 +#define LCD_BIT_RW 2 +#define LCD_BIT_BL 3 +#define LCD_BIT_CL 4 +#define LCD_BIT_DA 5 +#define LCD_BITS 6 + +/* + * each bit can be either connected to a DATA or CTRL port + */ +#define LCD_PORT_C 0 +#define LCD_PORT_D 1 +#define LCD_PORTS 2 + +static unsigned char lcd_bits[LCD_PORTS][LCD_BITS][BIT_STATES]; + +/* + * LCD protocols + */ +#define LCD_PROTO_PARALLEL 0 +#define LCD_PROTO_SERIAL 1 +#define LCD_PROTO_TI_DA8XX_LCD 2 + +/* + * LCD character sets + */ +#define LCD_CHARSET_NORMAL 0 +#define LCD_CHARSET_KS0074 1 + +/* + * LCD types + */ +#define LCD_TYPE_NONE 0 +#define LCD_TYPE_CUSTOM 1 +#define LCD_TYPE_OLD 2 +#define LCD_TYPE_KS0074 3 +#define LCD_TYPE_HANTRONIX 4 +#define LCD_TYPE_NEXCOM 5 + +/* + * keypad types + */ +#define KEYPAD_TYPE_NONE 0 +#define KEYPAD_TYPE_OLD 1 +#define KEYPAD_TYPE_NEW 2 +#define KEYPAD_TYPE_NEXCOM 3 + +/* + * panel profiles + */ +#define PANEL_PROFILE_CUSTOM 0 +#define PANEL_PROFILE_OLD 1 +#define PANEL_PROFILE_NEW 2 +#define PANEL_PROFILE_HANTRONIX 3 +#define PANEL_PROFILE_NEXCOM 4 +#define PANEL_PROFILE_LARGE 5 + +/* + * Construct custom config from the kernel's configuration + */ +#define DEFAULT_PARPORT 0 +#define DEFAULT_PROFILE PANEL_PROFILE_LARGE +#define DEFAULT_KEYPAD_TYPE KEYPAD_TYPE_OLD +#define DEFAULT_LCD_TYPE LCD_TYPE_OLD +#define DEFAULT_LCD_HEIGHT 2 +#define DEFAULT_LCD_WIDTH 40 +#define DEFAULT_LCD_BWIDTH 40 +#define DEFAULT_LCD_HWIDTH 64 +#define DEFAULT_LCD_CHARSET LCD_CHARSET_NORMAL +#define DEFAULT_LCD_PROTO LCD_PROTO_PARALLEL + +#define DEFAULT_LCD_PIN_E PIN_AUTOLF +#define DEFAULT_LCD_PIN_RS PIN_SELECP +#define DEFAULT_LCD_PIN_RW PIN_INITP +#define DEFAULT_LCD_PIN_SCL PIN_STROBE +#define DEFAULT_LCD_PIN_SDA PIN_D0 +#define DEFAULT_LCD_PIN_BL PIN_NOT_SET + +#ifdef CONFIG_PANEL_PARPORT +#undef DEFAULT_PARPORT +#define DEFAULT_PARPORT CONFIG_PANEL_PARPORT +#endif + +#ifdef CONFIG_PANEL_PROFILE +#undef DEFAULT_PROFILE +#define DEFAULT_PROFILE CONFIG_PANEL_PROFILE +#endif + +#if DEFAULT_PROFILE == 0 /* custom */ +#ifdef CONFIG_PANEL_KEYPAD +#undef DEFAULT_KEYPAD_TYPE +#define DEFAULT_KEYPAD_TYPE CONFIG_PANEL_KEYPAD +#endif + +#ifdef CONFIG_PANEL_LCD +#undef DEFAULT_LCD_TYPE +#define DEFAULT_LCD_TYPE CONFIG_PANEL_LCD +#endif + +#ifdef CONFIG_PANEL_LCD_HEIGHT +#undef DEFAULT_LCD_HEIGHT +#define DEFAULT_LCD_HEIGHT CONFIG_PANEL_LCD_HEIGHT +#endif + +#ifdef CONFIG_PANEL_LCD_WIDTH +#undef DEFAULT_LCD_WIDTH +#define DEFAULT_LCD_WIDTH CONFIG_PANEL_LCD_WIDTH +#endif + +#ifdef CONFIG_PANEL_LCD_BWIDTH +#undef DEFAULT_LCD_BWIDTH +#define DEFAULT_LCD_BWIDTH CONFIG_PANEL_LCD_BWIDTH +#endif + +#ifdef CONFIG_PANEL_LCD_HWIDTH +#undef DEFAULT_LCD_HWIDTH +#define DEFAULT_LCD_HWIDTH CONFIG_PANEL_LCD_HWIDTH +#endif + +#ifdef CONFIG_PANEL_LCD_CHARSET +#undef DEFAULT_LCD_CHARSET +#define DEFAULT_LCD_CHARSET CONFIG_PANEL_LCD_CHARSET +#endif + +#ifdef CONFIG_PANEL_LCD_PROTO +#undef DEFAULT_LCD_PROTO +#define DEFAULT_LCD_PROTO CONFIG_PANEL_LCD_PROTO +#endif + +#ifdef CONFIG_PANEL_LCD_PIN_E +#undef DEFAULT_LCD_PIN_E +#define DEFAULT_LCD_PIN_E CONFIG_PANEL_LCD_PIN_E +#endif + +#ifdef CONFIG_PANEL_LCD_PIN_RS +#undef DEFAULT_LCD_PIN_RS +#define DEFAULT_LCD_PIN_RS CONFIG_PANEL_LCD_PIN_RS +#endif + +#ifdef CONFIG_PANEL_LCD_PIN_RW +#undef DEFAULT_LCD_PIN_RW +#define DEFAULT_LCD_PIN_RW CONFIG_PANEL_LCD_PIN_RW +#endif + +#ifdef CONFIG_PANEL_LCD_PIN_SCL +#undef DEFAULT_LCD_PIN_SCL +#define DEFAULT_LCD_PIN_SCL CONFIG_PANEL_LCD_PIN_SCL +#endif + +#ifdef CONFIG_PANEL_LCD_PIN_SDA +#undef DEFAULT_LCD_PIN_SDA +#define DEFAULT_LCD_PIN_SDA CONFIG_PANEL_LCD_PIN_SDA +#endif + +#ifdef CONFIG_PANEL_LCD_PIN_BL +#undef DEFAULT_LCD_PIN_BL +#define DEFAULT_LCD_PIN_BL CONFIG_PANEL_LCD_PIN_BL +#endif + +#endif /* DEFAULT_PROFILE == 0 */ + +/* global variables */ + +/* Device single-open policy control */ +static atomic_t lcd_available = ATOMIC_INIT(1); +static atomic_t keypad_available = ATOMIC_INIT(1); + +static struct pardevice *pprt; + +static int keypad_initialized; + +static void (*lcd_write_cmd)(int); +static void (*lcd_write_data)(int); +static void (*lcd_clear_fast)(void); + +static DEFINE_SPINLOCK(pprt_lock); +static struct timer_list scan_timer; + +MODULE_DESCRIPTION("Generic parallel port LCD/Keypad driver"); + +static int parport = DEFAULT_PARPORT; +module_param(parport, int, 0000); +MODULE_PARM_DESC(parport, "Parallel port index (0=lpt1, 1=lpt2, ...)"); + +static int profile = DEFAULT_PROFILE; +module_param(profile, int, 0000); +MODULE_PARM_DESC(profile, + "1=16x2 old kp; 2=serial 16x2, new kp; 3=16x2 hantronix; " + "4=16x2 nexcom; default=40x2, old kp"); + +static int keypad_type = NOT_SET; +module_param(keypad_type, int, 0000); +MODULE_PARM_DESC(keypad_type, + "Keypad type: 0=none, 1=old 6 keys, 2=new 6+1 keys, 3=nexcom 4 keys"); + +static int lcd_type = NOT_SET; +module_param(lcd_type, int, 0000); +MODULE_PARM_DESC(lcd_type, + "LCD type: 0=none, 1=compiled-in, 2=old, 3=serial ks0074, 4=hantronix, 5=nexcom"); + +static int lcd_height = NOT_SET; +module_param(lcd_height, int, 0000); +MODULE_PARM_DESC(lcd_height, "Number of lines on the LCD"); + +static int lcd_width = NOT_SET; +module_param(lcd_width, int, 0000); +MODULE_PARM_DESC(lcd_width, "Number of columns on the LCD"); + +static int lcd_bwidth = NOT_SET; /* internal buffer width (usually 40) */ +module_param(lcd_bwidth, int, 0000); +MODULE_PARM_DESC(lcd_bwidth, "Internal LCD line width (40)"); + +static int lcd_hwidth = NOT_SET; /* hardware buffer width (usually 64) */ +module_param(lcd_hwidth, int, 0000); +MODULE_PARM_DESC(lcd_hwidth, "LCD line hardware address (64)"); + +static int lcd_charset = NOT_SET; +module_param(lcd_charset, int, 0000); +MODULE_PARM_DESC(lcd_charset, "LCD character set: 0=standard, 1=KS0074"); + +static int lcd_proto = NOT_SET; +module_param(lcd_proto, int, 0000); +MODULE_PARM_DESC(lcd_proto, + "LCD communication: 0=parallel (//), 1=serial, 2=TI LCD Interface"); + +/* + * These are the parallel port pins the LCD control signals are connected to. + * Set this to 0 if the signal is not used. Set it to its opposite value + * (negative) if the signal is negated. -MAXINT is used to indicate that the + * pin has not been explicitly specified. + * + * WARNING! no check will be performed about collisions with keypad ! + */ + +static int lcd_e_pin = PIN_NOT_SET; +module_param(lcd_e_pin, int, 0000); +MODULE_PARM_DESC(lcd_e_pin, + "# of the // port pin connected to LCD 'E' signal, with polarity (-17..17)"); + +static int lcd_rs_pin = PIN_NOT_SET; +module_param(lcd_rs_pin, int, 0000); +MODULE_PARM_DESC(lcd_rs_pin, + "# of the // port pin connected to LCD 'RS' signal, with polarity (-17..17)"); + +static int lcd_rw_pin = PIN_NOT_SET; +module_param(lcd_rw_pin, int, 0000); +MODULE_PARM_DESC(lcd_rw_pin, + "# of the // port pin connected to LCD 'RW' signal, with polarity (-17..17)"); + +static int lcd_cl_pin = PIN_NOT_SET; +module_param(lcd_cl_pin, int, 0000); +MODULE_PARM_DESC(lcd_cl_pin, + "# of the // port pin connected to serial LCD 'SCL' signal, with polarity (-17..17)"); + +static int lcd_da_pin = PIN_NOT_SET; +module_param(lcd_da_pin, int, 0000); +MODULE_PARM_DESC(lcd_da_pin, + "# of the // port pin connected to serial LCD 'SDA' signal, with polarity (-17..17)"); + +static int lcd_bl_pin = PIN_NOT_SET; +module_param(lcd_bl_pin, int, 0000); +MODULE_PARM_DESC(lcd_bl_pin, + "# of the // port pin connected to LCD backlight, with polarity (-17..17)"); + +/* Deprecated module parameters - consider not using them anymore */ + +static int lcd_enabled = NOT_SET; +module_param(lcd_enabled, int, 0000); +MODULE_PARM_DESC(lcd_enabled, "Deprecated option, use lcd_type instead"); + +static int keypad_enabled = NOT_SET; +module_param(keypad_enabled, int, 0000); +MODULE_PARM_DESC(keypad_enabled, "Deprecated option, use keypad_type instead"); + +static const unsigned char *lcd_char_conv; + +/* for some LCD drivers (ks0074) we need a charset conversion table. */ +static const unsigned char lcd_char_conv_ks0074[256] = { + /* 0|8 1|9 2|A 3|B 4|C 5|D 6|E 7|F */ + /* 0x00 */ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07, + /* 0x08 */ 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f, + /* 0x10 */ 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, + /* 0x18 */ 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f, + /* 0x20 */ 0x20, 0x21, 0x22, 0x23, 0xa2, 0x25, 0x26, 0x27, + /* 0x28 */ 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f, + /* 0x30 */ 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37, + /* 0x38 */ 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f, + /* 0x40 */ 0xa0, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47, + /* 0x48 */ 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f, + /* 0x50 */ 0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57, + /* 0x58 */ 0x58, 0x59, 0x5a, 0xfa, 0xfb, 0xfc, 0x1d, 0xc4, + /* 0x60 */ 0x96, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67, + /* 0x68 */ 0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f, + /* 0x70 */ 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77, + /* 0x78 */ 0x78, 0x79, 0x7a, 0xfd, 0xfe, 0xff, 0xce, 0x20, + /* 0x80 */ 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, + /* 0x88 */ 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, + /* 0x90 */ 0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, + /* 0x98 */ 0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f, + /* 0xA0 */ 0x20, 0x40, 0xb1, 0xa1, 0x24, 0xa3, 0xfe, 0x5f, + /* 0xA8 */ 0x22, 0xc8, 0x61, 0x14, 0x97, 0x2d, 0xad, 0x96, + /* 0xB0 */ 0x80, 0x8c, 0x82, 0x83, 0x27, 0x8f, 0x86, 0xdd, + /* 0xB8 */ 0x2c, 0x81, 0x6f, 0x15, 0x8b, 0x8a, 0x84, 0x60, + /* 0xC0 */ 0xe2, 0xe2, 0xe2, 0x5b, 0x5b, 0xae, 0xbc, 0xa9, + /* 0xC8 */ 0xc5, 0xbf, 0xc6, 0xf1, 0xe3, 0xe3, 0xe3, 0xe3, + /* 0xD0 */ 0x44, 0x5d, 0xa8, 0xe4, 0xec, 0xec, 0x5c, 0x78, + /* 0xD8 */ 0xab, 0xa6, 0xe5, 0x5e, 0x5e, 0xe6, 0xaa, 0xbe, + /* 0xE0 */ 0x7f, 0xe7, 0xaf, 0x7b, 0x7b, 0xaf, 0xbd, 0xc8, + /* 0xE8 */ 0xa4, 0xa5, 0xc7, 0xf6, 0xa7, 0xe8, 0x69, 0x69, + /* 0xF0 */ 0xed, 0x7d, 0xa8, 0xe4, 0xec, 0x5c, 0x5c, 0x25, + /* 0xF8 */ 0xac, 0xa6, 0xea, 0xef, 0x7e, 0xeb, 0xb2, 0x79, +}; + +static const char old_keypad_profile[][4][9] = { + {"S0", "Left\n", "Left\n", ""}, + {"S1", "Down\n", "Down\n", ""}, + {"S2", "Up\n", "Up\n", ""}, + {"S3", "Right\n", "Right\n", ""}, + {"S4", "Esc\n", "Esc\n", ""}, + {"S5", "Ret\n", "Ret\n", ""}, + {"", "", "", ""} +}; + +/* signals, press, repeat, release */ +static const char new_keypad_profile[][4][9] = { + {"S0", "Left\n", "Left\n", ""}, + {"S1", "Down\n", "Down\n", ""}, + {"S2", "Up\n", "Up\n", ""}, + {"S3", "Right\n", "Right\n", ""}, + {"S4s5", "", "Esc\n", "Esc\n"}, + {"s4S5", "", "Ret\n", "Ret\n"}, + {"S4S5", "Help\n", "", ""}, + /* add new signals above this line */ + {"", "", "", ""} +}; + +/* signals, press, repeat, release */ +static const char nexcom_keypad_profile[][4][9] = { + {"a-p-e-", "Down\n", "Down\n", ""}, + {"a-p-E-", "Ret\n", "Ret\n", ""}, + {"a-P-E-", "Esc\n", "Esc\n", ""}, + {"a-P-e-", "Up\n", "Up\n", ""}, + /* add new signals above this line */ + {"", "", "", ""} +}; + +static const char (*keypad_profile)[4][9] = old_keypad_profile; + +static DECLARE_BITMAP(bits, LCD_BITS); + +static void lcd_get_bits(unsigned int port, int *val) +{ + unsigned int bit, state; + + for (bit = 0; bit < LCD_BITS; bit++) { + state = test_bit(bit, bits) ? BIT_SET : BIT_CLR; + *val &= lcd_bits[port][bit][BIT_MSK]; + *val |= lcd_bits[port][bit][state]; + } +} + +static void init_scan_timer(void); + +/* sets data port bits according to current signals values */ +static int set_data_bits(void) +{ + int val; + + val = r_dtr(pprt); + lcd_get_bits(LCD_PORT_D, &val); + w_dtr(pprt, val); + return val; +} + +/* sets ctrl port bits according to current signals values */ +static int set_ctrl_bits(void) +{ + int val; + + val = r_ctr(pprt); + lcd_get_bits(LCD_PORT_C, &val); + w_ctr(pprt, val); + return val; +} + +/* sets ctrl & data port bits according to current signals values */ +static void panel_set_bits(void) +{ + set_data_bits(); + set_ctrl_bits(); +} + +/* + * Converts a parallel port pin (from -25 to 25) to data and control ports + * masks, and data and control port bits. The signal will be considered + * unconnected if it's on pin 0 or an invalid pin (<-25 or >25). + * + * Result will be used this way : + * out(dport, in(dport) & d_val[2] | d_val[signal_state]) + * out(cport, in(cport) & c_val[2] | c_val[signal_state]) + */ +static void pin_to_bits(int pin, unsigned char *d_val, unsigned char *c_val) +{ + int d_bit, c_bit, inv; + + d_val[0] = 0; + c_val[0] = 0; + d_val[1] = 0; + c_val[1] = 0; + d_val[2] = 0xFF; + c_val[2] = 0xFF; + + if (pin == 0) + return; + + inv = (pin < 0); + if (inv) + pin = -pin; + + d_bit = 0; + c_bit = 0; + + switch (pin) { + case PIN_STROBE: /* strobe, inverted */ + c_bit = PNL_PSTROBE; + inv = !inv; + break; + case PIN_D0...PIN_D7: /* D0 - D7 = 2 - 9 */ + d_bit = 1 << (pin - 2); + break; + case PIN_AUTOLF: /* autofeed, inverted */ + c_bit = PNL_PAUTOLF; + inv = !inv; + break; + case PIN_INITP: /* init, direct */ + c_bit = PNL_PINITP; + break; + case PIN_SELECP: /* select_in, inverted */ + c_bit = PNL_PSELECP; + inv = !inv; + break; + default: /* unknown pin, ignore */ + break; + } + + if (c_bit) { + c_val[2] &= ~c_bit; + c_val[!inv] = c_bit; + } else if (d_bit) { + d_val[2] &= ~d_bit; + d_val[!inv] = d_bit; + } +} + +/* sleeps that many milliseconds with a reschedule */ +static void long_sleep(int ms) +{ + if (in_interrupt()) + mdelay(ms); + else + schedule_timeout_interruptible(msecs_to_jiffies(ms)); +} + +/* + * send a serial byte to the LCD panel. The caller is responsible for locking + * if needed. + */ +static void lcd_send_serial(int byte) +{ + int bit; + + /* + * the data bit is set on D0, and the clock on STROBE. + * LCD reads D0 on STROBE's rising edge. + */ + for (bit = 0; bit < 8; bit++) { + clear_bit(LCD_BIT_CL, bits); /* CLK low */ + panel_set_bits(); + if (byte & 1) { + set_bit(LCD_BIT_DA, bits); + } else { + clear_bit(LCD_BIT_DA, bits); + } + + panel_set_bits(); + udelay(2); /* maintain the data during 2 us before CLK up */ + set_bit(LCD_BIT_CL, bits); /* CLK high */ + panel_set_bits(); + udelay(1); /* maintain the strobe during 1 us */ + byte >>= 1; + } +} + +/* turn the backlight on or off */ +static void lcd_backlight(int on) +{ + if (lcd.pins.bl == PIN_NONE) + return; + + /* The backlight is activated by setting the AUTOFEED line to +5V */ + spin_lock_irq(&pprt_lock); + if (on) + set_bit(LCD_BIT_BL, bits); + else + clear_bit(LCD_BIT_BL, bits); + panel_set_bits(); + spin_unlock_irq(&pprt_lock); +} + +/* send a command to the LCD panel in serial mode */ +static void lcd_write_cmd_s(int cmd) +{ + spin_lock_irq(&pprt_lock); + lcd_send_serial(0x1F); /* R/W=W, RS=0 */ + lcd_send_serial(cmd & 0x0F); + lcd_send_serial((cmd >> 4) & 0x0F); + udelay(40); /* the shortest command takes at least 40 us */ + spin_unlock_irq(&pprt_lock); +} + +/* send data to the LCD panel in serial mode */ +static void lcd_write_data_s(int data) +{ + spin_lock_irq(&pprt_lock); + lcd_send_serial(0x5F); /* R/W=W, RS=1 */ + lcd_send_serial(data & 0x0F); + lcd_send_serial((data >> 4) & 0x0F); + udelay(40); /* the shortest data takes at least 40 us */ + spin_unlock_irq(&pprt_lock); +} + +/* send a command to the LCD panel in 8 bits parallel mode */ +static void lcd_write_cmd_p8(int cmd) +{ + spin_lock_irq(&pprt_lock); + /* present the data to the data port */ + w_dtr(pprt, cmd); + udelay(20); /* maintain the data during 20 us before the strobe */ + + set_bit(LCD_BIT_E, bits); + clear_bit(LCD_BIT_RS, bits); + clear_bit(LCD_BIT_RW, bits); + set_ctrl_bits(); + + udelay(40); /* maintain the strobe during 40 us */ + + clear_bit(LCD_BIT_E, bits); + set_ctrl_bits(); + + udelay(120); /* the shortest command takes at least 120 us */ + spin_unlock_irq(&pprt_lock); +} + +/* send data to the LCD panel in 8 bits parallel mode */ +static void lcd_write_data_p8(int data) +{ + spin_lock_irq(&pprt_lock); + /* present the data to the data port */ + w_dtr(pprt, data); + udelay(20); /* maintain the data during 20 us before the strobe */ + + set_bit(LCD_BIT_E, bits); + set_bit(LCD_BIT_RS, bits); + clear_bit(LCD_BIT_RW, bits); + set_ctrl_bits(); + + udelay(40); /* maintain the strobe during 40 us */ + + clear_bit(LCD_BIT_E, bits); + set_ctrl_bits(); + + udelay(45); /* the shortest data takes at least 45 us */ + spin_unlock_irq(&pprt_lock); +} + +/* send a command to the TI LCD panel */ +static void lcd_write_cmd_tilcd(int cmd) +{ + spin_lock_irq(&pprt_lock); + /* present the data to the control port */ + w_ctr(pprt, cmd); + udelay(60); + spin_unlock_irq(&pprt_lock); +} + +/* send data to the TI LCD panel */ +static void lcd_write_data_tilcd(int data) +{ + spin_lock_irq(&pprt_lock); + /* present the data to the data port */ + w_dtr(pprt, data); + udelay(60); + spin_unlock_irq(&pprt_lock); +} + +static void lcd_gotoxy(void) +{ + lcd_write_cmd(LCD_CMD_SET_DDRAM_ADDR + | (lcd.addr.y ? lcd.hwidth : 0) + /* + * we force the cursor to stay at the end of the + * line if it wants to go farther + */ + | ((lcd.addr.x < lcd.bwidth) ? lcd.addr.x & + (lcd.hwidth - 1) : lcd.bwidth - 1)); +} + +static void lcd_print(char c) +{ + if (lcd.addr.x < lcd.bwidth) { + if (lcd_char_conv) + c = lcd_char_conv[(unsigned char)c]; + lcd_write_data(c); + lcd.addr.x++; + } + /* prevents the cursor from wrapping onto the next line */ + if (lcd.addr.x == lcd.bwidth) + lcd_gotoxy(); +} + +/* fills the display with spaces and resets X/Y */ +static void lcd_clear_fast_s(void) +{ + int pos; + + lcd.addr.x = 0; + lcd.addr.y = 0; + lcd_gotoxy(); + + spin_lock_irq(&pprt_lock); + for (pos = 0; pos < lcd.height * lcd.hwidth; pos++) { + lcd_send_serial(0x5F); /* R/W=W, RS=1 */ + lcd_send_serial(' ' & 0x0F); + lcd_send_serial((' ' >> 4) & 0x0F); + /* the shortest data takes at least 40 us */ + udelay(40); + } + spin_unlock_irq(&pprt_lock); + + lcd.addr.x = 0; + lcd.addr.y = 0; + lcd_gotoxy(); +} + +/* fills the display with spaces and resets X/Y */ +static void lcd_clear_fast_p8(void) +{ + int pos; + + lcd.addr.x = 0; + lcd.addr.y = 0; + lcd_gotoxy(); + + spin_lock_irq(&pprt_lock); + for (pos = 0; pos < lcd.height * lcd.hwidth; pos++) { + /* present the data to the data port */ + w_dtr(pprt, ' '); + + /* maintain the data during 20 us before the strobe */ + udelay(20); + + set_bit(LCD_BIT_E, bits); + set_bit(LCD_BIT_RS, bits); + clear_bit(LCD_BIT_RW, bits); + set_ctrl_bits(); + + /* maintain the strobe during 40 us */ + udelay(40); + + clear_bit(LCD_BIT_E, bits); + set_ctrl_bits(); + + /* the shortest data takes at least 45 us */ + udelay(45); + } + spin_unlock_irq(&pprt_lock); + + lcd.addr.x = 0; + lcd.addr.y = 0; + lcd_gotoxy(); +} + +/* fills the display with spaces and resets X/Y */ +static void lcd_clear_fast_tilcd(void) +{ + int pos; + + lcd.addr.x = 0; + lcd.addr.y = 0; + lcd_gotoxy(); + + spin_lock_irq(&pprt_lock); + for (pos = 0; pos < lcd.height * lcd.hwidth; pos++) { + /* present the data to the data port */ + w_dtr(pprt, ' '); + udelay(60); + } + + spin_unlock_irq(&pprt_lock); + + lcd.addr.x = 0; + lcd.addr.y = 0; + lcd_gotoxy(); +} + +/* clears the display and resets X/Y */ +static void lcd_clear_display(void) +{ + lcd_write_cmd(LCD_CMD_DISPLAY_CLEAR); + lcd.addr.x = 0; + lcd.addr.y = 0; + /* we must wait a few milliseconds (15) */ + long_sleep(15); +} + +static void lcd_init_display(void) +{ + lcd.flags = ((lcd.height > 1) ? LCD_FLAG_N : 0) + | LCD_FLAG_D | LCD_FLAG_C | LCD_FLAG_B; + + long_sleep(20); /* wait 20 ms after power-up for the paranoid */ + + /* 8bits, 1 line, small fonts; let's do it 3 times */ + lcd_write_cmd(LCD_CMD_FUNCTION_SET | LCD_CMD_DATA_LEN_8BITS); + long_sleep(10); + lcd_write_cmd(LCD_CMD_FUNCTION_SET | LCD_CMD_DATA_LEN_8BITS); + long_sleep(10); + lcd_write_cmd(LCD_CMD_FUNCTION_SET | LCD_CMD_DATA_LEN_8BITS); + long_sleep(10); + + /* set font height and lines number */ + lcd_write_cmd(LCD_CMD_FUNCTION_SET | LCD_CMD_DATA_LEN_8BITS + | ((lcd.flags & LCD_FLAG_F) ? LCD_CMD_FONT_5X10_DOTS : 0) + | ((lcd.flags & LCD_FLAG_N) ? LCD_CMD_TWO_LINES : 0) + ); + long_sleep(10); + + /* display off, cursor off, blink off */ + lcd_write_cmd(LCD_CMD_DISPLAY_CTRL); + long_sleep(10); + + lcd_write_cmd(LCD_CMD_DISPLAY_CTRL /* set display mode */ + | ((lcd.flags & LCD_FLAG_D) ? LCD_CMD_DISPLAY_ON : 0) + | ((lcd.flags & LCD_FLAG_C) ? LCD_CMD_CURSOR_ON : 0) + | ((lcd.flags & LCD_FLAG_B) ? LCD_CMD_BLINK_ON : 0) + ); + + lcd_backlight((lcd.flags & LCD_FLAG_L) ? 1 : 0); + + long_sleep(10); + + /* entry mode set : increment, cursor shifting */ + lcd_write_cmd(LCD_CMD_ENTRY_MODE | LCD_CMD_CURSOR_INC); + + lcd_clear_display(); +} + +/* + * These are the file operation function for user access to /dev/lcd + * This function can also be called from inside the kernel, by + * setting file and ppos to NULL. + * + */ + +static inline int handle_lcd_special_code(void) +{ + /* LCD special codes */ + + int processed = 0; + + char *esc = lcd.esc_seq.buf + 2; + int oldflags = lcd.flags; + + /* check for display mode flags */ + switch (*esc) { + case 'D': /* Display ON */ + lcd.flags |= LCD_FLAG_D; + processed = 1; + break; + case 'd': /* Display OFF */ + lcd.flags &= ~LCD_FLAG_D; + processed = 1; + break; + case 'C': /* Cursor ON */ + lcd.flags |= LCD_FLAG_C; + processed = 1; + break; + case 'c': /* Cursor OFF */ + lcd.flags &= ~LCD_FLAG_C; + processed = 1; + break; + case 'B': /* Blink ON */ + lcd.flags |= LCD_FLAG_B; + processed = 1; + break; + case 'b': /* Blink OFF */ + lcd.flags &= ~LCD_FLAG_B; + processed = 1; + break; + case '+': /* Back light ON */ + lcd.flags |= LCD_FLAG_L; + processed = 1; + break; + case '-': /* Back light OFF */ + lcd.flags &= ~LCD_FLAG_L; + processed = 1; + break; + case '*': + /* flash back light using the keypad timer */ + if (scan_timer.function) { + if (lcd.light_tempo == 0 && + ((lcd.flags & LCD_FLAG_L) == 0)) + lcd_backlight(1); + lcd.light_tempo = FLASH_LIGHT_TEMPO; + } + processed = 1; + break; + case 'f': /* Small Font */ + lcd.flags &= ~LCD_FLAG_F; + processed = 1; + break; + case 'F': /* Large Font */ + lcd.flags |= LCD_FLAG_F; + processed = 1; + break; + case 'n': /* One Line */ + lcd.flags &= ~LCD_FLAG_N; + processed = 1; + break; + case 'N': /* Two Lines */ + lcd.flags |= LCD_FLAG_N; + break; + case 'l': /* Shift Cursor Left */ + if (lcd.addr.x > 0) { + /* back one char if not at end of line */ + if (lcd.addr.x < lcd.bwidth) + lcd_write_cmd(LCD_CMD_SHIFT); + lcd.addr.x--; + } + processed = 1; + break; + case 'r': /* shift cursor right */ + if (lcd.addr.x < lcd.width) { + /* allow the cursor to pass the end of the line */ + if (lcd.addr.x < (lcd.bwidth - 1)) + lcd_write_cmd(LCD_CMD_SHIFT | + LCD_CMD_SHIFT_RIGHT); + lcd.addr.x++; + } + processed = 1; + break; + case 'L': /* shift display left */ + lcd_write_cmd(LCD_CMD_SHIFT | LCD_CMD_DISPLAY_SHIFT); + processed = 1; + break; + case 'R': /* shift display right */ + lcd_write_cmd(LCD_CMD_SHIFT | LCD_CMD_DISPLAY_SHIFT | + LCD_CMD_SHIFT_RIGHT); + processed = 1; + break; + case 'k': { /* kill end of line */ + int x; + + for (x = lcd.addr.x; x < lcd.bwidth; x++) + lcd_write_data(' '); + + /* restore cursor position */ + lcd_gotoxy(); + processed = 1; + break; + } + case 'I': /* reinitialize display */ + lcd_init_display(); + processed = 1; + break; + case 'G': { + /* Generator : LGcxxxxx...xx; must have <c> between '0' + * and '7', representing the numerical ASCII code of the + * redefined character, and <xx...xx> a sequence of 16 + * hex digits representing 8 bytes for each character. + * Most LCDs will only use 5 lower bits of the 7 first + * bytes. + */ + + unsigned char cgbytes[8]; + unsigned char cgaddr; + int cgoffset; + int shift; + char value; + int addr; + + if (!strchr(esc, ';')) + break; + + esc++; + + cgaddr = *(esc++) - '0'; + if (cgaddr > 7) { + processed = 1; + break; + } + + cgoffset = 0; + shift = 0; + value = 0; + while (*esc && cgoffset < 8) { + shift ^= 4; + if (*esc >= '0' && *esc <= '9') { + value |= (*esc - '0') << shift; + } else if (*esc >= 'A' && *esc <= 'Z') { + value |= (*esc - 'A' + 10) << shift; + } else if (*esc >= 'a' && *esc <= 'z') { + value |= (*esc - 'a' + 10) << shift; + } else { + esc++; + continue; + } + + if (shift == 0) { + cgbytes[cgoffset++] = value; + value = 0; + } + + esc++; + } + + lcd_write_cmd(LCD_CMD_SET_CGRAM_ADDR | (cgaddr * 8)); + for (addr = 0; addr < cgoffset; addr++) + lcd_write_data(cgbytes[addr]); + + /* ensures that we stop writing to CGRAM */ + lcd_gotoxy(); + processed = 1; + break; + } + case 'x': /* gotoxy : LxXXX[yYYY]; */ + case 'y': /* gotoxy : LyYYY[xXXX]; */ + if (!strchr(esc, ';')) + break; + + while (*esc) { + if (*esc == 'x') { + esc++; + if (kstrtoul(esc, 10, &lcd.addr.x) < 0) + break; + } else if (*esc == 'y') { + esc++; + if (kstrtoul(esc, 10, &lcd.addr.y) < 0) + break; + } else { + break; + } + } + + lcd_gotoxy(); + processed = 1; + break; + } + + /* TODO: This indent party here got ugly, clean it! */ + /* Check whether one flag was changed */ + if (oldflags != lcd.flags) { + /* check whether one of B,C,D flags were changed */ + if ((oldflags ^ lcd.flags) & + (LCD_FLAG_B | LCD_FLAG_C | LCD_FLAG_D)) + /* set display mode */ + lcd_write_cmd(LCD_CMD_DISPLAY_CTRL + | ((lcd.flags & LCD_FLAG_D) + ? LCD_CMD_DISPLAY_ON : 0) + | ((lcd.flags & LCD_FLAG_C) + ? LCD_CMD_CURSOR_ON : 0) + | ((lcd.flags & LCD_FLAG_B) + ? LCD_CMD_BLINK_ON : 0)); + /* check whether one of F,N flags was changed */ + else if ((oldflags ^ lcd.flags) & (LCD_FLAG_F | LCD_FLAG_N)) + lcd_write_cmd(LCD_CMD_FUNCTION_SET + | LCD_CMD_DATA_LEN_8BITS + | ((lcd.flags & LCD_FLAG_F) + ? LCD_CMD_TWO_LINES : 0) + | ((lcd.flags & LCD_FLAG_N) + ? LCD_CMD_FONT_5X10_DOTS + : 0)); + /* check whether L flag was changed */ + else if ((oldflags ^ lcd.flags) & (LCD_FLAG_L)) { + if (lcd.flags & (LCD_FLAG_L)) + lcd_backlight(1); + else if (lcd.light_tempo == 0) + /* + * switch off the light only when the tempo + * lighting is gone + */ + lcd_backlight(0); + } + } + + return processed; +} + +static void lcd_write_char(char c) +{ + /* first, we'll test if we're in escape mode */ + if ((c != '\n') && lcd.esc_seq.len >= 0) { + /* yes, let's add this char to the buffer */ + lcd.esc_seq.buf[lcd.esc_seq.len++] = c; + lcd.esc_seq.buf[lcd.esc_seq.len] = 0; + } else { + /* aborts any previous escape sequence */ + lcd.esc_seq.len = -1; + + switch (c) { + case LCD_ESCAPE_CHAR: + /* start of an escape sequence */ + lcd.esc_seq.len = 0; + lcd.esc_seq.buf[lcd.esc_seq.len] = 0; + break; + case '\b': + /* go back one char and clear it */ + if (lcd.addr.x > 0) { + /* + * check if we're not at the + * end of the line + */ + if (lcd.addr.x < lcd.bwidth) + /* back one char */ + lcd_write_cmd(LCD_CMD_SHIFT); + lcd.addr.x--; + } + /* replace with a space */ + lcd_write_data(' '); + /* back one char again */ + lcd_write_cmd(LCD_CMD_SHIFT); + break; + case '\014': + /* quickly clear the display */ + lcd_clear_fast(); + break; + case '\n': + /* + * flush the remainder of the current line and + * go to the beginning of the next line + */ + for (; lcd.addr.x < lcd.bwidth; lcd.addr.x++) + lcd_write_data(' '); + lcd.addr.x = 0; + lcd.addr.y = (lcd.addr.y + 1) % lcd.height; + lcd_gotoxy(); + break; + case '\r': + /* go to the beginning of the same line */ + lcd.addr.x = 0; + lcd_gotoxy(); + break; + case '\t': + /* print a space instead of the tab */ + lcd_print(' '); + break; + default: + /* simply print this char */ + lcd_print(c); + break; + } + } + + /* + * now we'll see if we're in an escape mode and if the current + * escape sequence can be understood. + */ + if (lcd.esc_seq.len >= 2) { + int processed = 0; + + if (!strcmp(lcd.esc_seq.buf, "[2J")) { + /* clear the display */ + lcd_clear_fast(); + processed = 1; + } else if (!strcmp(lcd.esc_seq.buf, "[H")) { + /* cursor to home */ + lcd.addr.x = 0; + lcd.addr.y = 0; + lcd_gotoxy(); + processed = 1; + } + /* codes starting with ^[[L */ + else if ((lcd.esc_seq.len >= 3) && + (lcd.esc_seq.buf[0] == '[') && + (lcd.esc_seq.buf[1] == 'L')) { + processed = handle_lcd_special_code(); + } + + /* LCD special escape codes */ + /* + * flush the escape sequence if it's been processed + * or if it is getting too long. + */ + if (processed || (lcd.esc_seq.len >= LCD_ESCAPE_LEN)) + lcd.esc_seq.len = -1; + } /* escape codes */ +} + +static ssize_t lcd_write(struct file *file, + const char __user *buf, size_t count, loff_t *ppos) +{ + const char __user *tmp = buf; + char c; + + for (; count-- > 0; (*ppos)++, tmp++) { + if (!in_interrupt() && (((count + 1) & 0x1f) == 0)) + /* + * let's be a little nice with other processes + * that need some CPU + */ + schedule(); + + if (get_user(c, tmp)) + return -EFAULT; + + lcd_write_char(c); + } + + return tmp - buf; +} + +static int lcd_open(struct inode *inode, struct file *file) +{ + if (!atomic_dec_and_test(&lcd_available)) + return -EBUSY; /* open only once at a time */ + + if (file->f_mode & FMODE_READ) /* device is write-only */ + return -EPERM; + + if (lcd.must_clear) { + lcd_clear_display(); + lcd.must_clear = false; + } + return nonseekable_open(inode, file); +} + +static int lcd_release(struct inode *inode, struct file *file) +{ + atomic_inc(&lcd_available); + return 0; +} + +static const struct file_operations lcd_fops = { + .write = lcd_write, + .open = lcd_open, + .release = lcd_release, + .llseek = no_llseek, +}; + +static struct miscdevice lcd_dev = { + .minor = LCD_MINOR, + .name = "lcd", + .fops = &lcd_fops, +}; + +/* public function usable from the kernel for any purpose */ +static void panel_lcd_print(const char *s) +{ + const char *tmp = s; + int count = strlen(s); + + if (lcd.enabled && lcd.initialized) { + for (; count-- > 0; tmp++) { + if (!in_interrupt() && (((count + 1) & 0x1f) == 0)) + /* + * let's be a little nice with other processes + * that need some CPU + */ + schedule(); + + lcd_write_char(*tmp); + } + } +} + +/* initialize the LCD driver */ +static void lcd_init(void) +{ + switch (selected_lcd_type) { + case LCD_TYPE_OLD: + /* parallel mode, 8 bits */ + lcd.proto = LCD_PROTO_PARALLEL; + lcd.charset = LCD_CHARSET_NORMAL; + lcd.pins.e = PIN_STROBE; + lcd.pins.rs = PIN_AUTOLF; + + lcd.width = 40; + lcd.bwidth = 40; + lcd.hwidth = 64; + lcd.height = 2; + break; + case LCD_TYPE_KS0074: + /* serial mode, ks0074 */ + lcd.proto = LCD_PROTO_SERIAL; + lcd.charset = LCD_CHARSET_KS0074; + lcd.pins.bl = PIN_AUTOLF; + lcd.pins.cl = PIN_STROBE; + lcd.pins.da = PIN_D0; + + lcd.width = 16; + lcd.bwidth = 40; + lcd.hwidth = 16; + lcd.height = 2; + break; + case LCD_TYPE_NEXCOM: + /* parallel mode, 8 bits, generic */ + lcd.proto = LCD_PROTO_PARALLEL; + lcd.charset = LCD_CHARSET_NORMAL; + lcd.pins.e = PIN_AUTOLF; + lcd.pins.rs = PIN_SELECP; + lcd.pins.rw = PIN_INITP; + + lcd.width = 16; + lcd.bwidth = 40; + lcd.hwidth = 64; + lcd.height = 2; + break; + case LCD_TYPE_CUSTOM: + /* customer-defined */ + lcd.proto = DEFAULT_LCD_PROTO; + lcd.charset = DEFAULT_LCD_CHARSET; + /* default geometry will be set later */ + break; + case LCD_TYPE_HANTRONIX: + /* parallel mode, 8 bits, hantronix-like */ + default: + lcd.proto = LCD_PROTO_PARALLEL; + lcd.charset = LCD_CHARSET_NORMAL; + lcd.pins.e = PIN_STROBE; + lcd.pins.rs = PIN_SELECP; + + lcd.width = 16; + lcd.bwidth = 40; + lcd.hwidth = 64; + lcd.height = 2; + break; + } + + /* Overwrite with module params set on loading */ + if (lcd_height != NOT_SET) + lcd.height = lcd_height; + if (lcd_width != NOT_SET) + lcd.width = lcd_width; + if (lcd_bwidth != NOT_SET) + lcd.bwidth = lcd_bwidth; + if (lcd_hwidth != NOT_SET) + lcd.hwidth = lcd_hwidth; + if (lcd_charset != NOT_SET) + lcd.charset = lcd_charset; + if (lcd_proto != NOT_SET) + lcd.proto = lcd_proto; + if (lcd_e_pin != PIN_NOT_SET) + lcd.pins.e = lcd_e_pin; + if (lcd_rs_pin != PIN_NOT_SET) + lcd.pins.rs = lcd_rs_pin; + if (lcd_rw_pin != PIN_NOT_SET) + lcd.pins.rw = lcd_rw_pin; + if (lcd_cl_pin != PIN_NOT_SET) + lcd.pins.cl = lcd_cl_pin; + if (lcd_da_pin != PIN_NOT_SET) + lcd.pins.da = lcd_da_pin; + if (lcd_bl_pin != PIN_NOT_SET) + lcd.pins.bl = lcd_bl_pin; + + /* this is used to catch wrong and default values */ + if (lcd.width <= 0) + lcd.width = DEFAULT_LCD_WIDTH; + if (lcd.bwidth <= 0) + lcd.bwidth = DEFAULT_LCD_BWIDTH; + if (lcd.hwidth <= 0) + lcd.hwidth = DEFAULT_LCD_HWIDTH; + if (lcd.height <= 0) + lcd.height = DEFAULT_LCD_HEIGHT; + + if (lcd.proto == LCD_PROTO_SERIAL) { /* SERIAL */ + lcd_write_cmd = lcd_write_cmd_s; + lcd_write_data = lcd_write_data_s; + lcd_clear_fast = lcd_clear_fast_s; + + if (lcd.pins.cl == PIN_NOT_SET) + lcd.pins.cl = DEFAULT_LCD_PIN_SCL; + if (lcd.pins.da == PIN_NOT_SET) + lcd.pins.da = DEFAULT_LCD_PIN_SDA; + + } else if (lcd.proto == LCD_PROTO_PARALLEL) { /* PARALLEL */ + lcd_write_cmd = lcd_write_cmd_p8; + lcd_write_data = lcd_write_data_p8; + lcd_clear_fast = lcd_clear_fast_p8; + + if (lcd.pins.e == PIN_NOT_SET) + lcd.pins.e = DEFAULT_LCD_PIN_E; + if (lcd.pins.rs == PIN_NOT_SET) + lcd.pins.rs = DEFAULT_LCD_PIN_RS; + if (lcd.pins.rw == PIN_NOT_SET) + lcd.pins.rw = DEFAULT_LCD_PIN_RW; + } else { + lcd_write_cmd = lcd_write_cmd_tilcd; + lcd_write_data = lcd_write_data_tilcd; + lcd_clear_fast = lcd_clear_fast_tilcd; + } + + if (lcd.pins.bl == PIN_NOT_SET) + lcd.pins.bl = DEFAULT_LCD_PIN_BL; + + if (lcd.pins.e == PIN_NOT_SET) + lcd.pins.e = PIN_NONE; + if (lcd.pins.rs == PIN_NOT_SET) + lcd.pins.rs = PIN_NONE; + if (lcd.pins.rw == PIN_NOT_SET) + lcd.pins.rw = PIN_NONE; + if (lcd.pins.bl == PIN_NOT_SET) + lcd.pins.bl = PIN_NONE; + if (lcd.pins.cl == PIN_NOT_SET) + lcd.pins.cl = PIN_NONE; + if (lcd.pins.da == PIN_NOT_SET) + lcd.pins.da = PIN_NONE; + + if (lcd.charset == NOT_SET) + lcd.charset = DEFAULT_LCD_CHARSET; + + if (lcd.charset == LCD_CHARSET_KS0074) + lcd_char_conv = lcd_char_conv_ks0074; + else + lcd_char_conv = NULL; + + if (lcd.pins.bl != PIN_NONE) + init_scan_timer(); + + pin_to_bits(lcd.pins.e, lcd_bits[LCD_PORT_D][LCD_BIT_E], + lcd_bits[LCD_PORT_C][LCD_BIT_E]); + pin_to_bits(lcd.pins.rs, lcd_bits[LCD_PORT_D][LCD_BIT_RS], + lcd_bits[LCD_PORT_C][LCD_BIT_RS]); + pin_to_bits(lcd.pins.rw, lcd_bits[LCD_PORT_D][LCD_BIT_RW], + lcd_bits[LCD_PORT_C][LCD_BIT_RW]); + pin_to_bits(lcd.pins.bl, lcd_bits[LCD_PORT_D][LCD_BIT_BL], + lcd_bits[LCD_PORT_C][LCD_BIT_BL]); + pin_to_bits(lcd.pins.cl, lcd_bits[LCD_PORT_D][LCD_BIT_CL], + lcd_bits[LCD_PORT_C][LCD_BIT_CL]); + pin_to_bits(lcd.pins.da, lcd_bits[LCD_PORT_D][LCD_BIT_DA], + lcd_bits[LCD_PORT_C][LCD_BIT_DA]); + + /* + * before this line, we must NOT send anything to the display. + * Since lcd_init_display() needs to write data, we have to + * enable mark the LCD initialized just before. + */ + lcd.initialized = true; + lcd_init_display(); + + /* display a short message */ +#ifdef CONFIG_PANEL_CHANGE_MESSAGE +#ifdef CONFIG_PANEL_BOOT_MESSAGE + panel_lcd_print("\x1b[Lc\x1b[Lb\x1b[L*" CONFIG_PANEL_BOOT_MESSAGE); +#endif +#else + panel_lcd_print("\x1b[Lc\x1b[Lb\x1b[L*Linux-" UTS_RELEASE "\nPanel-" + PANEL_VERSION); +#endif + lcd.addr.x = 0; + lcd.addr.y = 0; + /* clear the display on the next device opening */ + lcd.must_clear = true; + lcd_gotoxy(); +} + +/* + * These are the file operation function for user access to /dev/keypad + */ + +static ssize_t keypad_read(struct file *file, + char __user *buf, size_t count, loff_t *ppos) +{ + unsigned i = *ppos; + char __user *tmp = buf; + + if (keypad_buflen == 0) { + if (file->f_flags & O_NONBLOCK) + return -EAGAIN; + + if (wait_event_interruptible(keypad_read_wait, + keypad_buflen != 0)) + return -EINTR; + } + + for (; count-- > 0 && (keypad_buflen > 0); + ++i, ++tmp, --keypad_buflen) { + put_user(keypad_buffer[keypad_start], tmp); + keypad_start = (keypad_start + 1) % KEYPAD_BUFFER; + } + *ppos = i; + + return tmp - buf; +} + +static int keypad_open(struct inode *inode, struct file *file) +{ + if (!atomic_dec_and_test(&keypad_available)) + return -EBUSY; /* open only once at a time */ + + if (file->f_mode & FMODE_WRITE) /* device is read-only */ + return -EPERM; + + keypad_buflen = 0; /* flush the buffer on opening */ + return 0; +} + +static int keypad_release(struct inode *inode, struct file *file) +{ + atomic_inc(&keypad_available); + return 0; +} + +static const struct file_operations keypad_fops = { + .read = keypad_read, /* read */ + .open = keypad_open, /* open */ + .release = keypad_release, /* close */ + .llseek = default_llseek, +}; + +static struct miscdevice keypad_dev = { + .minor = KEYPAD_MINOR, + .name = "keypad", + .fops = &keypad_fops, +}; + +static void keypad_send_key(const char *string, int max_len) +{ + /* send the key to the device only if a process is attached to it. */ + if (!atomic_read(&keypad_available)) { + while (max_len-- && keypad_buflen < KEYPAD_BUFFER && *string) { + keypad_buffer[(keypad_start + keypad_buflen++) % + KEYPAD_BUFFER] = *string++; + } + wake_up_interruptible(&keypad_read_wait); + } +} + +/* this function scans all the bits involving at least one logical signal, + * and puts the results in the bitfield "phys_read" (one bit per established + * contact), and sets "phys_read_prev" to "phys_read". + * + * Note: to debounce input signals, we will only consider as switched a signal + * which is stable across 2 measures. Signals which are different between two + * reads will be kept as they previously were in their logical form (phys_prev). + * A signal which has just switched will have a 1 in + * (phys_read ^ phys_read_prev). + */ +static void phys_scan_contacts(void) +{ + int bit, bitval; + char oldval; + char bitmask; + char gndmask; + + phys_prev = phys_curr; + phys_read_prev = phys_read; + phys_read = 0; /* flush all signals */ + + /* keep track of old value, with all outputs disabled */ + oldval = r_dtr(pprt) | scan_mask_o; + /* activate all keyboard outputs (active low) */ + w_dtr(pprt, oldval & ~scan_mask_o); + + /* will have a 1 for each bit set to gnd */ + bitmask = PNL_PINPUT(r_str(pprt)) & scan_mask_i; + /* disable all matrix signals */ + w_dtr(pprt, oldval); + + /* now that all outputs are cleared, the only active input bits are + * directly connected to the ground + */ + + /* 1 for each grounded input */ + gndmask = PNL_PINPUT(r_str(pprt)) & scan_mask_i; + + /* grounded inputs are signals 40-44 */ + phys_read |= (__u64)gndmask << 40; + + if (bitmask != gndmask) { + /* + * since clearing the outputs changed some inputs, we know + * that some input signals are currently tied to some outputs. + * So we'll scan them. + */ + for (bit = 0; bit < 8; bit++) { + bitval = BIT(bit); + + if (!(scan_mask_o & bitval)) /* skip unused bits */ + continue; + + w_dtr(pprt, oldval & ~bitval); /* enable this output */ + bitmask = PNL_PINPUT(r_str(pprt)) & ~gndmask; + phys_read |= (__u64)bitmask << (5 * bit); + } + w_dtr(pprt, oldval); /* disable all outputs */ + } + /* + * this is easy: use old bits when they are flapping, + * use new ones when stable + */ + phys_curr = (phys_prev & (phys_read ^ phys_read_prev)) | + (phys_read & ~(phys_read ^ phys_read_prev)); +} + +static inline int input_state_high(struct logical_input *input) +{ +#if 0 + /* FIXME: + * this is an invalid test. It tries to catch + * transitions from single-key to multiple-key, but + * doesn't take into account the contacts polarity. + * The only solution to the problem is to parse keys + * from the most complex to the simplest combinations, + * and mark them as 'caught' once a combination + * matches, then unmatch it for all other ones. + */ + + /* try to catch dangerous transitions cases : + * someone adds a bit, so this signal was a false + * positive resulting from a transition. We should + * invalidate the signal immediately and not call the + * release function. + * eg: 0 -(press A)-> A -(press B)-> AB : don't match A's release. + */ + if (((phys_prev & input->mask) == input->value) && + ((phys_curr & input->mask) > input->value)) { + input->state = INPUT_ST_LOW; /* invalidate */ + return 1; + } +#endif + + if ((phys_curr & input->mask) == input->value) { + if ((input->type == INPUT_TYPE_STD) && + (input->high_timer == 0)) { + input->high_timer++; + if (input->u.std.press_fct) + input->u.std.press_fct(input->u.std.press_data); + } else if (input->type == INPUT_TYPE_KBD) { + /* will turn on the light */ + keypressed = 1; + + if (input->high_timer == 0) { + char *press_str = input->u.kbd.press_str; + + if (press_str[0]) { + int s = sizeof(input->u.kbd.press_str); + + keypad_send_key(press_str, s); + } + } + + if (input->u.kbd.repeat_str[0]) { + char *repeat_str = input->u.kbd.repeat_str; + + if (input->high_timer >= KEYPAD_REP_START) { + int s = sizeof(input->u.kbd.repeat_str); + + input->high_timer -= KEYPAD_REP_DELAY; + keypad_send_key(repeat_str, s); + } + /* we will need to come back here soon */ + inputs_stable = 0; + } + + if (input->high_timer < 255) + input->high_timer++; + } + return 1; + } + + /* else signal falling down. Let's fall through. */ + input->state = INPUT_ST_FALLING; + input->fall_timer = 0; + + return 0; +} + +static inline void input_state_falling(struct logical_input *input) +{ +#if 0 + /* FIXME !!! same comment as in input_state_high */ + if (((phys_prev & input->mask) == input->value) && + ((phys_curr & input->mask) > input->value)) { + input->state = INPUT_ST_LOW; /* invalidate */ + return; + } +#endif + + if ((phys_curr & input->mask) == input->value) { + if (input->type == INPUT_TYPE_KBD) { + /* will turn on the light */ + keypressed = 1; + + if (input->u.kbd.repeat_str[0]) { + char *repeat_str = input->u.kbd.repeat_str; + + if (input->high_timer >= KEYPAD_REP_START) { + int s = sizeof(input->u.kbd.repeat_str); + + input->high_timer -= KEYPAD_REP_DELAY; + keypad_send_key(repeat_str, s); + } + /* we will need to come back here soon */ + inputs_stable = 0; + } + + if (input->high_timer < 255) + input->high_timer++; + } + input->state = INPUT_ST_HIGH; + } else if (input->fall_timer >= input->fall_time) { + /* call release event */ + if (input->type == INPUT_TYPE_STD) { + void (*release_fct)(int) = input->u.std.release_fct; + + if (release_fct) + release_fct(input->u.std.release_data); + } else if (input->type == INPUT_TYPE_KBD) { + char *release_str = input->u.kbd.release_str; + + if (release_str[0]) { + int s = sizeof(input->u.kbd.release_str); + + keypad_send_key(release_str, s); + } + } + + input->state = INPUT_ST_LOW; + } else { + input->fall_timer++; + inputs_stable = 0; + } +} + +static void panel_process_inputs(void) +{ + struct list_head *item; + struct logical_input *input; + + keypressed = 0; + inputs_stable = 1; + list_for_each(item, &logical_inputs) { + input = list_entry(item, struct logical_input, list); + + switch (input->state) { + case INPUT_ST_LOW: + if ((phys_curr & input->mask) != input->value) + break; + /* if all needed ones were already set previously, + * this means that this logical signal has been + * activated by the releasing of another combined + * signal, so we don't want to match. + * eg: AB -(release B)-> A -(release A)-> 0 : + * don't match A. + */ + if ((phys_prev & input->mask) == input->value) + break; + input->rise_timer = 0; + input->state = INPUT_ST_RISING; + /* no break here, fall through */ + case INPUT_ST_RISING: + if ((phys_curr & input->mask) != input->value) { + input->state = INPUT_ST_LOW; + break; + } + if (input->rise_timer < input->rise_time) { + inputs_stable = 0; + input->rise_timer++; + break; + } + input->high_timer = 0; + input->state = INPUT_ST_HIGH; + /* no break here, fall through */ + case INPUT_ST_HIGH: + if (input_state_high(input)) + break; + /* no break here, fall through */ + case INPUT_ST_FALLING: + input_state_falling(input); + } + } +} + +static void panel_scan_timer(void) +{ + if (keypad.enabled && keypad_initialized) { + if (spin_trylock_irq(&pprt_lock)) { + phys_scan_contacts(); + + /* no need for the parport anymore */ + spin_unlock_irq(&pprt_lock); + } + + if (!inputs_stable || phys_curr != phys_prev) + panel_process_inputs(); + } + + if (lcd.enabled && lcd.initialized) { + if (keypressed) { + if (lcd.light_tempo == 0 && + ((lcd.flags & LCD_FLAG_L) == 0)) + lcd_backlight(1); + lcd.light_tempo = FLASH_LIGHT_TEMPO; + } else if (lcd.light_tempo > 0) { + lcd.light_tempo--; + if (lcd.light_tempo == 0 && + ((lcd.flags & LCD_FLAG_L) == 0)) + lcd_backlight(0); + } + } + + mod_timer(&scan_timer, jiffies + INPUT_POLL_TIME); +} + +static void init_scan_timer(void) +{ + if (scan_timer.function) + return; /* already started */ + + setup_timer(&scan_timer, (void *)&panel_scan_timer, 0); + scan_timer.expires = jiffies + INPUT_POLL_TIME; + add_timer(&scan_timer); +} + +/* converts a name of the form "({BbAaPpSsEe}{01234567-})*" to a series of bits. + * if <omask> or <imask> are non-null, they will be or'ed with the bits + * corresponding to out and in bits respectively. + * returns 1 if ok, 0 if error (in which case, nothing is written). + */ +static u8 input_name2mask(const char *name, __u64 *mask, __u64 *value, + u8 *imask, u8 *omask) +{ + const char sigtab[] = "EeSsPpAaBb"; + u8 im, om; + __u64 m, v; + + om = 0; + im = 0; + m = 0ULL; + v = 0ULL; + while (*name) { + int in, out, bit, neg; + const char *idx; + + idx = strchr(sigtab, *name); + if (!idx) + return 0; /* input name not found */ + + in = idx - sigtab; + neg = (in & 1); /* odd (lower) names are negated */ + in >>= 1; + im |= BIT(in); + + name++; + if (*name >= '0' && *name <= '7') { + out = *name - '0'; + om |= BIT(out); + } else if (*name == '-') { + out = 8; + } else { + return 0; /* unknown bit name */ + } + + bit = (out * 5) + in; + + m |= 1ULL << bit; + if (!neg) + v |= 1ULL << bit; + name++; + } + *mask = m; + *value = v; + if (imask) + *imask |= im; + if (omask) + *omask |= om; + return 1; +} + +/* tries to bind a key to the signal name <name>. The key will send the + * strings <press>, <repeat>, <release> for these respective events. + * Returns the pointer to the new key if ok, NULL if the key could not be bound. + */ +static struct logical_input *panel_bind_key(const char *name, const char *press, + const char *repeat, + const char *release) +{ + struct logical_input *key; + + key = kzalloc(sizeof(*key), GFP_KERNEL); + if (!key) + return NULL; + + if (!input_name2mask(name, &key->mask, &key->value, &scan_mask_i, + &scan_mask_o)) { + kfree(key); + return NULL; + } + + key->type = INPUT_TYPE_KBD; + key->state = INPUT_ST_LOW; + key->rise_time = 1; + key->fall_time = 1; + + strncpy(key->u.kbd.press_str, press, sizeof(key->u.kbd.press_str)); + strncpy(key->u.kbd.repeat_str, repeat, sizeof(key->u.kbd.repeat_str)); + strncpy(key->u.kbd.release_str, release, + sizeof(key->u.kbd.release_str)); + list_add(&key->list, &logical_inputs); + return key; +} + +#if 0 +/* tries to bind a callback function to the signal name <name>. The function + * <press_fct> will be called with the <press_data> arg when the signal is + * activated, and so on for <release_fct>/<release_data> + * Returns the pointer to the new signal if ok, NULL if the signal could not + * be bound. + */ +static struct logical_input *panel_bind_callback(char *name, + void (*press_fct)(int), + int press_data, + void (*release_fct)(int), + int release_data) +{ + struct logical_input *callback; + + callback = kmalloc(sizeof(*callback), GFP_KERNEL); + if (!callback) + return NULL; + + memset(callback, 0, sizeof(struct logical_input)); + if (!input_name2mask(name, &callback->mask, &callback->value, + &scan_mask_i, &scan_mask_o)) + return NULL; + + callback->type = INPUT_TYPE_STD; + callback->state = INPUT_ST_LOW; + callback->rise_time = 1; + callback->fall_time = 1; + callback->u.std.press_fct = press_fct; + callback->u.std.press_data = press_data; + callback->u.std.release_fct = release_fct; + callback->u.std.release_data = release_data; + list_add(&callback->list, &logical_inputs); + return callback; +} +#endif + +static void keypad_init(void) +{ + int keynum; + + init_waitqueue_head(&keypad_read_wait); + keypad_buflen = 0; /* flushes any eventual noisy keystroke */ + + /* Let's create all known keys */ + + for (keynum = 0; keypad_profile[keynum][0][0]; keynum++) { + panel_bind_key(keypad_profile[keynum][0], + keypad_profile[keynum][1], + keypad_profile[keynum][2], + keypad_profile[keynum][3]); + } + + init_scan_timer(); + keypad_initialized = 1; +} + +/**************************************************/ +/* device initialization */ +/**************************************************/ + +static int panel_notify_sys(struct notifier_block *this, unsigned long code, + void *unused) +{ + if (lcd.enabled && lcd.initialized) { + switch (code) { + case SYS_DOWN: + panel_lcd_print + ("\x0cReloading\nSystem...\x1b[Lc\x1b[Lb\x1b[L+"); + break; + case SYS_HALT: + panel_lcd_print + ("\x0cSystem Halted.\x1b[Lc\x1b[Lb\x1b[L+"); + break; + case SYS_POWER_OFF: + panel_lcd_print("\x0cPower off.\x1b[Lc\x1b[Lb\x1b[L+"); + break; + default: + break; + } + } + return NOTIFY_DONE; +} + +static struct notifier_block panel_notifier = { + panel_notify_sys, + NULL, + 0 +}; + +static void panel_attach(struct parport *port) +{ + struct pardev_cb panel_cb; + + if (port->number != parport) + return; + + if (pprt) { + pr_err("%s: port->number=%d parport=%d, already registered!\n", + __func__, port->number, parport); + return; + } + + memset(&panel_cb, 0, sizeof(panel_cb)); + panel_cb.private = &pprt; + /* panel_cb.flags = 0 should be PARPORT_DEV_EXCL? */ + + pprt = parport_register_dev_model(port, "panel", &panel_cb, 0); + if (!pprt) { + pr_err("%s: port->number=%d parport=%d, parport_register_device() failed\n", + __func__, port->number, parport); + return; + } + + if (parport_claim(pprt)) { + pr_err("could not claim access to parport%d. Aborting.\n", + parport); + goto err_unreg_device; + } + + /* must init LCD first, just in case an IRQ from the keypad is + * generated at keypad init + */ + if (lcd.enabled) { + lcd_init(); + if (misc_register(&lcd_dev)) + goto err_unreg_device; + } + + if (keypad.enabled) { + keypad_init(); + if (misc_register(&keypad_dev)) + goto err_lcd_unreg; + } + register_reboot_notifier(&panel_notifier); + return; + +err_lcd_unreg: + if (lcd.enabled) + misc_deregister(&lcd_dev); +err_unreg_device: + parport_unregister_device(pprt); + pprt = NULL; +} + +static void panel_detach(struct parport *port) +{ + if (port->number != parport) + return; + + if (!pprt) { + pr_err("%s: port->number=%d parport=%d, nothing to unregister.\n", + __func__, port->number, parport); + return; + } + if (scan_timer.function) + del_timer_sync(&scan_timer); + + if (pprt) { + if (keypad.enabled) { + misc_deregister(&keypad_dev); + keypad_initialized = 0; + } + + if (lcd.enabled) { + panel_lcd_print("\x0cLCD driver " PANEL_VERSION + "\nunloaded.\x1b[Lc\x1b[Lb\x1b[L-"); + misc_deregister(&lcd_dev); + lcd.initialized = false; + } + + /* TODO: free all input signals */ + parport_release(pprt); + parport_unregister_device(pprt); + pprt = NULL; + unregister_reboot_notifier(&panel_notifier); + } +} + +static struct parport_driver panel_driver = { + .name = "panel", + .match_port = panel_attach, + .detach = panel_detach, + .devmodel = true, +}; + +/* init function */ +static int __init panel_init_module(void) +{ + int selected_keypad_type = NOT_SET, err; + + /* take care of an eventual profile */ + switch (profile) { + case PANEL_PROFILE_CUSTOM: + /* custom profile */ + selected_keypad_type = DEFAULT_KEYPAD_TYPE; + selected_lcd_type = DEFAULT_LCD_TYPE; + break; + case PANEL_PROFILE_OLD: + /* 8 bits, 2*16, old keypad */ + selected_keypad_type = KEYPAD_TYPE_OLD; + selected_lcd_type = LCD_TYPE_OLD; + + /* TODO: This two are a little hacky, sort it out later */ + if (lcd_width == NOT_SET) + lcd_width = 16; + if (lcd_hwidth == NOT_SET) + lcd_hwidth = 16; + break; + case PANEL_PROFILE_NEW: + /* serial, 2*16, new keypad */ + selected_keypad_type = KEYPAD_TYPE_NEW; + selected_lcd_type = LCD_TYPE_KS0074; + break; + case PANEL_PROFILE_HANTRONIX: + /* 8 bits, 2*16 hantronix-like, no keypad */ + selected_keypad_type = KEYPAD_TYPE_NONE; + selected_lcd_type = LCD_TYPE_HANTRONIX; + break; + case PANEL_PROFILE_NEXCOM: + /* generic 8 bits, 2*16, nexcom keypad, eg. Nexcom. */ + selected_keypad_type = KEYPAD_TYPE_NEXCOM; + selected_lcd_type = LCD_TYPE_NEXCOM; + break; + case PANEL_PROFILE_LARGE: + /* 8 bits, 2*40, old keypad */ + selected_keypad_type = KEYPAD_TYPE_OLD; + selected_lcd_type = LCD_TYPE_OLD; + break; + } + + /* + * Overwrite selection with module param values (both keypad and lcd), + * where the deprecated params have lower prio. + */ + if (keypad_enabled != NOT_SET) + selected_keypad_type = keypad_enabled; + if (keypad_type != NOT_SET) + selected_keypad_type = keypad_type; + + keypad.enabled = (selected_keypad_type > 0); + + if (lcd_enabled != NOT_SET) + selected_lcd_type = lcd_enabled; + if (lcd_type != NOT_SET) + selected_lcd_type = lcd_type; + + lcd.enabled = (selected_lcd_type > 0); + + if (lcd.enabled) { + /* + * Init lcd struct with load-time values to preserve exact + * current functionality (at least for now). + */ + lcd.height = lcd_height; + lcd.width = lcd_width; + lcd.bwidth = lcd_bwidth; + lcd.hwidth = lcd_hwidth; + lcd.charset = lcd_charset; + lcd.proto = lcd_proto; + lcd.pins.e = lcd_e_pin; + lcd.pins.rs = lcd_rs_pin; + lcd.pins.rw = lcd_rw_pin; + lcd.pins.cl = lcd_cl_pin; + lcd.pins.da = lcd_da_pin; + lcd.pins.bl = lcd_bl_pin; + + /* Leave it for now, just in case */ + lcd.esc_seq.len = -1; + } + + switch (selected_keypad_type) { + case KEYPAD_TYPE_OLD: + keypad_profile = old_keypad_profile; + break; + case KEYPAD_TYPE_NEW: + keypad_profile = new_keypad_profile; + break; + case KEYPAD_TYPE_NEXCOM: + keypad_profile = nexcom_keypad_profile; + break; + default: + keypad_profile = NULL; + break; + } + + if (!lcd.enabled && !keypad.enabled) { + /* no device enabled, let's exit */ + pr_err("driver version " PANEL_VERSION " disabled.\n"); + return -ENODEV; + } + + err = parport_register_driver(&panel_driver); + if (err) { + pr_err("could not register with parport. Aborting.\n"); + return err; + } + + if (pprt) + pr_info("driver version " PANEL_VERSION + " registered on parport%d (io=0x%lx).\n", parport, + pprt->port->base); + else + pr_info("driver version " PANEL_VERSION + " not yet registered\n"); + return 0; +} + +static void __exit panel_cleanup_module(void) +{ + parport_unregister_driver(&panel_driver); +} + +module_init(panel_init_module); +module_exit(panel_cleanup_module); +MODULE_AUTHOR("Willy Tarreau"); +MODULE_LICENSE("GPL"); + +/* + * Local variables: + * c-indent-level: 4 + * tab-width: 8 + * End: + */ diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c index 9a17a9b..4810e03 100644 --- a/drivers/misc/pch_phub.c +++ b/drivers/misc/pch_phub.c @@ -503,8 +503,7 @@ static ssize_t pch_phub_bin_read(struct file *filp, struct kobject *kobj, int err; ssize_t rom_size; - struct pch_phub_reg *chip = - dev_get_drvdata(container_of(kobj, struct device, kobj)); + struct pch_phub_reg *chip = dev_get_drvdata(kobj_to_dev(kobj)); ret = mutex_lock_interruptible(&pch_phub_mutex); if (ret) { @@ -514,8 +513,10 @@ static ssize_t pch_phub_bin_read(struct file *filp, struct kobject *kobj, /* Get Rom signature */ chip->pch_phub_extrom_base_address = pci_map_rom(chip->pdev, &rom_size); - if (!chip->pch_phub_extrom_base_address) + if (!chip->pch_phub_extrom_base_address) { + err = -ENODATA; goto exrom_map_err; + } pch_phub_read_serial_rom(chip, chip->pch_opt_rom_start_address, (unsigned char *)&rom_signature); @@ -567,8 +568,7 @@ static ssize_t pch_phub_bin_write(struct file *filp, struct kobject *kobj, unsigned int addr_offset; int ret; ssize_t rom_size; - struct pch_phub_reg *chip = - dev_get_drvdata(container_of(kobj, struct device, kobj)); + struct pch_phub_reg *chip = dev_get_drvdata(kobj_to_dev(kobj)); ret = mutex_lock_interruptible(&pch_phub_mutex); if (ret) diff --git a/drivers/misc/sram.c b/drivers/misc/sram.c index 736dae7..69cdabe 100644 --- a/drivers/misc/sram.c +++ b/drivers/misc/sram.c @@ -360,7 +360,10 @@ static int sram_probe(struct platform_device *pdev) return -EBUSY; } - sram->virt_base = devm_ioremap_wc(sram->dev, res->start, size); + if (of_property_read_bool(pdev->dev.of_node, "no-memory-wc")) + sram->virt_base = devm_ioremap(sram->dev, res->start, size); + else + sram->virt_base = devm_ioremap_wc(sram->dev, res->start, size); if (IS_ERR(sram->virt_base)) return PTR_ERR(sram->virt_base); diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c index 6e3af8b..dcdbd58 100644 --- a/drivers/misc/ti-st/st_core.c +++ b/drivers/misc/ti-st/st_core.c @@ -632,7 +632,6 @@ long st_register(struct st_proto_s *new_proto) spin_unlock_irqrestore(&st_gdata->lock, flags); return err; } - pr_debug("done %s(%d) ", __func__, new_proto->chnl_id); } EXPORT_SYMBOL_GPL(st_register); diff --git a/drivers/misc/vmw_vmci/vmci_driver.c b/drivers/misc/vmw_vmci/vmci_driver.c index b823f9a..896be15 100644 --- a/drivers/misc/vmw_vmci/vmci_driver.c +++ b/drivers/misc/vmw_vmci/vmci_driver.c @@ -113,5 +113,5 @@ module_exit(vmci_drv_exit); MODULE_AUTHOR("VMware, Inc."); MODULE_DESCRIPTION("VMware Virtual Machine Communication Interface."); -MODULE_VERSION("1.1.3.0-k"); +MODULE_VERSION("1.1.4.0-k"); MODULE_LICENSE("GPL v2"); |