diff options
Diffstat (limited to 'drivers/misc')
-rw-r--r-- | drivers/misc/Kconfig | 10 | ||||
-rw-r--r-- | drivers/misc/Makefile | 1 | ||||
-rw-r--r-- | drivers/misc/arm-charlcd.c | 396 | ||||
-rw-r--r-- | drivers/misc/cs5535-mfgpt.c | 2 | ||||
-rw-r--r-- | drivers/misc/eeprom/at24.c | 1 | ||||
-rw-r--r-- | drivers/misc/vmware_balloon.c | 18 |
6 files changed, 423 insertions, 5 deletions
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 26386a9..9b089df 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -353,6 +353,16 @@ config VMWARE_BALLOON To compile this driver as a module, choose M here: the module will be called vmware_balloon. +config ARM_CHARLCD + bool "ARM Ltd. Character LCD Driver" + depends on PLAT_VERSATILE + help + This is a driver for the character LCD found on the ARM Ltd. + Versatile and RealView Platform Baseboards. It doesn't do + very much more than display the text "ARM Linux" on the first + line and the Linux version on the second line, but that's + still useful. + source "drivers/misc/c2port/Kconfig" source "drivers/misc/eeprom/Kconfig" source "drivers/misc/cb710/Kconfig" diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 6ed06a1..67552d6 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -31,3 +31,4 @@ obj-$(CONFIG_IWMC3200TOP) += iwmc3200top/ obj-y += eeprom/ obj-y += cb710/ obj-$(CONFIG_VMWARE_BALLOON) += vmware_balloon.o +obj-$(CONFIG_ARM_CHARLCD) += arm-charlcd.o diff --git a/drivers/misc/arm-charlcd.c b/drivers/misc/arm-charlcd.c new file mode 100644 index 0000000..9e3879e --- /dev/null +++ b/drivers/misc/arm-charlcd.c @@ -0,0 +1,396 @@ +/* + * Driver for the on-board character LCD found on some ARM reference boards + * This is basically an Hitachi HD44780 LCD with a custom IP block to drive it + * http://en.wikipedia.org/wiki/HD44780_Character_LCD + * Currently it will just display the text "ARM Linux" and the linux version + * + * License terms: GNU General Public License (GPL) version 2 + * Author: Linus Walleij <triad@df.lth.se> + */ +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/completion.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/slab.h> +#include <linux/workqueue.h> +#include <generated/utsrelease.h> + +#define DRIVERNAME "arm-charlcd" +#define CHARLCD_TIMEOUT (msecs_to_jiffies(1000)) + +/* Offsets to registers */ +#define CHAR_COM 0x00U +#define CHAR_DAT 0x04U +#define CHAR_RD 0x08U +#define CHAR_RAW 0x0CU +#define CHAR_MASK 0x10U +#define CHAR_STAT 0x14U + +#define CHAR_RAW_CLEAR 0x00000000U +#define CHAR_RAW_VALID 0x00000100U + +/* Hitachi HD44780 display commands */ +#define HD_CLEAR 0x01U +#define HD_HOME 0x02U +#define HD_ENTRYMODE 0x04U +#define HD_ENTRYMODE_INCREMENT 0x02U +#define HD_ENTRYMODE_SHIFT 0x01U +#define HD_DISPCTRL 0x08U +#define HD_DISPCTRL_ON 0x04U +#define HD_DISPCTRL_CURSOR_ON 0x02U +#define HD_DISPCTRL_CURSOR_BLINK 0x01U +#define HD_CRSR_SHIFT 0x10U +#define HD_CRSR_SHIFT_DISPLAY 0x08U +#define HD_CRSR_SHIFT_DISPLAY_RIGHT 0x04U +#define HD_FUNCSET 0x20U +#define HD_FUNCSET_8BIT 0x10U +#define HD_FUNCSET_2_LINES 0x08U +#define HD_FUNCSET_FONT_5X10 0x04U +#define HD_SET_CGRAM 0x40U +#define HD_SET_DDRAM 0x80U +#define HD_BUSY_FLAG 0x80U + +/** + * @dev: a pointer back to containing device + * @phybase: the offset to the controller in physical memory + * @physize: the size of the physical page + * @virtbase: the offset to the controller in virtual memory + * @irq: reserved interrupt number + * @complete: completion structure for the last LCD command + */ +struct charlcd { + struct device *dev; + u32 phybase; + u32 physize; + void __iomem *virtbase; + int irq; + struct completion complete; + struct delayed_work init_work; +}; + +static irqreturn_t charlcd_interrupt(int irq, void *data) +{ + struct charlcd *lcd = data; + u8 status; + + status = readl(lcd->virtbase + CHAR_STAT) & 0x01; + /* Clear IRQ */ + writel(CHAR_RAW_CLEAR, lcd->virtbase + CHAR_RAW); + if (status) + complete(&lcd->complete); + else + dev_info(lcd->dev, "Spurious IRQ (%02x)\n", status); + return IRQ_HANDLED; +} + + +static void charlcd_wait_complete_irq(struct charlcd *lcd) +{ + int ret; + + ret = wait_for_completion_interruptible_timeout(&lcd->complete, + CHARLCD_TIMEOUT); + /* Disable IRQ after completion */ + writel(0x00, lcd->virtbase + CHAR_MASK); + + if (ret < 0) { + dev_err(lcd->dev, + "wait_for_completion_interruptible_timeout() " + "returned %d waiting for ready\n", ret); + return; + } + + if (ret == 0) { + dev_err(lcd->dev, "charlcd controller timed out " + "waiting for ready\n"); + return; + } +} + +static u8 charlcd_4bit_read_char(struct charlcd *lcd) +{ + u8 data; + u32 val; + int i; + + /* If we can, use an IRQ to wait for the data, else poll */ + if (lcd->irq >= 0) + charlcd_wait_complete_irq(lcd); + else { + i = 0; + val = 0; + while (!(val & CHAR_RAW_VALID) && i < 10) { + udelay(100); + val = readl(lcd->virtbase + CHAR_RAW); + i++; + } + + writel(CHAR_RAW_CLEAR, lcd->virtbase + CHAR_RAW); + } + msleep(1); + + /* Read the 4 high bits of the data */ + data = readl(lcd->virtbase + CHAR_RD) & 0xf0; + + /* + * The second read for the low bits does not trigger an IRQ + * so in this case we have to poll for the 4 lower bits + */ + i = 0; + val = 0; + while (!(val & CHAR_RAW_VALID) && i < 10) { + udelay(100); + val = readl(lcd->virtbase + CHAR_RAW); + i++; + } + writel(CHAR_RAW_CLEAR, lcd->virtbase + CHAR_RAW); + msleep(1); + + /* Read the 4 low bits of the data */ + data |= (readl(lcd->virtbase + CHAR_RD) >> 4) & 0x0f; + + return data; +} + +static bool charlcd_4bit_read_bf(struct charlcd *lcd) +{ + if (lcd->irq >= 0) { + /* + * If we'll use IRQs to wait for the busyflag, clear any + * pending flag and enable IRQ + */ + writel(CHAR_RAW_CLEAR, lcd->virtbase + CHAR_RAW); + init_completion(&lcd->complete); + writel(0x01, lcd->virtbase + CHAR_MASK); + } + readl(lcd->virtbase + CHAR_COM); + return charlcd_4bit_read_char(lcd) & HD_BUSY_FLAG ? true : false; +} + +static void charlcd_4bit_wait_busy(struct charlcd *lcd) +{ + int retries = 50; + + udelay(100); + while (charlcd_4bit_read_bf(lcd) && retries) + retries--; + if (!retries) + dev_err(lcd->dev, "timeout waiting for busyflag\n"); +} + +static void charlcd_4bit_command(struct charlcd *lcd, u8 cmd) +{ + u32 cmdlo = (cmd << 4) & 0xf0; + u32 cmdhi = (cmd & 0xf0); + + writel(cmdhi, lcd->virtbase + CHAR_COM); + udelay(10); + writel(cmdlo, lcd->virtbase + CHAR_COM); + charlcd_4bit_wait_busy(lcd); +} + +static void charlcd_4bit_char(struct charlcd *lcd, u8 ch) +{ + u32 chlo = (ch << 4) & 0xf0; + u32 chhi = (ch & 0xf0); + + writel(chhi, lcd->virtbase + CHAR_DAT); + udelay(10); + writel(chlo, lcd->virtbase + CHAR_DAT); + charlcd_4bit_wait_busy(lcd); +} + +static void charlcd_4bit_print(struct charlcd *lcd, int line, const char *str) +{ + u8 offset; + int i; + + /* + * We support line 0, 1 + * Line 1 runs from 0x00..0x27 + * Line 2 runs from 0x28..0x4f + */ + if (line == 0) + offset = 0; + else if (line == 1) + offset = 0x28; + else + return; + + /* Set offset */ + charlcd_4bit_command(lcd, HD_SET_DDRAM | offset); + + /* Send string */ + for (i = 0; i < strlen(str) && i < 0x28; i++) + charlcd_4bit_char(lcd, str[i]); +} + +static void charlcd_4bit_init(struct charlcd *lcd) +{ + /* These commands cannot be checked with the busy flag */ + writel(HD_FUNCSET | HD_FUNCSET_8BIT, lcd->virtbase + CHAR_COM); + msleep(5); + writel(HD_FUNCSET | HD_FUNCSET_8BIT, lcd->virtbase + CHAR_COM); + udelay(100); + writel(HD_FUNCSET | HD_FUNCSET_8BIT, lcd->virtbase + CHAR_COM); + udelay(100); + /* Go to 4bit mode */ + writel(HD_FUNCSET, lcd->virtbase + CHAR_COM); + udelay(100); + /* + * 4bit mode, 2 lines, 5x8 font, after this the number of lines + * and the font cannot be changed until the next initialization sequence + */ + charlcd_4bit_command(lcd, HD_FUNCSET | HD_FUNCSET_2_LINES); + charlcd_4bit_command(lcd, HD_DISPCTRL | HD_DISPCTRL_ON); + charlcd_4bit_command(lcd, HD_ENTRYMODE | HD_ENTRYMODE_INCREMENT); + charlcd_4bit_command(lcd, HD_CLEAR); + charlcd_4bit_command(lcd, HD_HOME); + /* Put something useful in the display */ + charlcd_4bit_print(lcd, 0, "ARM Linux"); + charlcd_4bit_print(lcd, 1, UTS_RELEASE); +} + +static void charlcd_init_work(struct work_struct *work) +{ + struct charlcd *lcd = + container_of(work, struct charlcd, init_work.work); + + charlcd_4bit_init(lcd); +} + +static int __init charlcd_probe(struct platform_device *pdev) +{ + int ret; + struct charlcd *lcd; + struct resource *res; + + lcd = kzalloc(sizeof(struct charlcd), GFP_KERNEL); + if (!lcd) + return -ENOMEM; + + lcd->dev = &pdev->dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + ret = -ENOENT; + goto out_no_resource; + } + lcd->phybase = res->start; + lcd->physize = resource_size(res); + + if (request_mem_region(lcd->phybase, lcd->physize, + DRIVERNAME) == NULL) { + ret = -EBUSY; + goto out_no_memregion; + } + + lcd->virtbase = ioremap(lcd->phybase, lcd->physize); + if (!lcd->virtbase) { + ret = -ENOMEM; + goto out_no_remap; + } + + lcd->irq = platform_get_irq(pdev, 0); + /* If no IRQ is supplied, we'll survive without it */ + if (lcd->irq >= 0) { + if (request_irq(lcd->irq, charlcd_interrupt, IRQF_DISABLED, + DRIVERNAME, lcd)) { + ret = -EIO; + goto out_no_irq; + } + } + + platform_set_drvdata(pdev, lcd); + + /* + * Initialize the display in a delayed work, because + * it is VERY slow and would slow down the boot of the system. + */ + INIT_DELAYED_WORK(&lcd->init_work, charlcd_init_work); + schedule_delayed_work(&lcd->init_work, 0); + + dev_info(&pdev->dev, "initalized ARM character LCD at %08x\n", + lcd->phybase); + + return 0; + +out_no_irq: + iounmap(lcd->virtbase); +out_no_remap: + platform_set_drvdata(pdev, NULL); +out_no_memregion: + release_mem_region(lcd->phybase, SZ_4K); +out_no_resource: + kfree(lcd); + return ret; +} + +static int __exit charlcd_remove(struct platform_device *pdev) +{ + struct charlcd *lcd = platform_get_drvdata(pdev); + + if (lcd) { + free_irq(lcd->irq, lcd); + iounmap(lcd->virtbase); + release_mem_region(lcd->phybase, lcd->physize); + platform_set_drvdata(pdev, NULL); + kfree(lcd); + } + + return 0; +} + +static int charlcd_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct charlcd *lcd = platform_get_drvdata(pdev); + + /* Power the display off */ + charlcd_4bit_command(lcd, HD_DISPCTRL); + return 0; +} + +static int charlcd_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct charlcd *lcd = platform_get_drvdata(pdev); + + /* Turn the display back on */ + charlcd_4bit_command(lcd, HD_DISPCTRL | HD_DISPCTRL_ON); + return 0; +} + +static const struct dev_pm_ops charlcd_pm_ops = { + .suspend = charlcd_suspend, + .resume = charlcd_resume, +}; + +static struct platform_driver charlcd_driver = { + .driver = { + .name = DRIVERNAME, + .owner = THIS_MODULE, + .pm = &charlcd_pm_ops, + }, + .remove = __exit_p(charlcd_remove), +}; + +static int __init charlcd_init(void) +{ + return platform_driver_probe(&charlcd_driver, charlcd_probe); +} + +static void __exit charlcd_exit(void) +{ + platform_driver_unregister(&charlcd_driver); +} + +module_init(charlcd_init); +module_exit(charlcd_exit); + +MODULE_AUTHOR("Linus Walleij <triad@df.lth.se>"); +MODULE_DESCRIPTION("ARM Character LCD Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/misc/cs5535-mfgpt.c b/drivers/misc/cs5535-mfgpt.c index 9bec24d..2d44b33 100644 --- a/drivers/misc/cs5535-mfgpt.c +++ b/drivers/misc/cs5535-mfgpt.c @@ -366,6 +366,6 @@ static int __init cs5535_mfgpt_init(void) module_init(cs5535_mfgpt_init); -MODULE_AUTHOR("Andres Salomon <dilinger@collabora.co.uk>"); +MODULE_AUTHOR("Andres Salomon <dilinger@queued.net>"); MODULE_DESCRIPTION("CS5535/CS5536 MFGPT timer driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c index f7ca3a4..559b0b3 100644 --- a/drivers/misc/eeprom/at24.c +++ b/drivers/misc/eeprom/at24.c @@ -643,7 +643,6 @@ static int __devexit at24_remove(struct i2c_client *client) kfree(at24->writebuf); kfree(at24); - i2c_set_clientdata(client, NULL); return 0; } diff --git a/drivers/misc/vmware_balloon.c b/drivers/misc/vmware_balloon.c index db9cd02..2a1e804 100644 --- a/drivers/misc/vmware_balloon.c +++ b/drivers/misc/vmware_balloon.c @@ -45,7 +45,7 @@ MODULE_AUTHOR("VMware, Inc."); MODULE_DESCRIPTION("VMware Memory Control (Balloon) Driver"); -MODULE_VERSION("1.2.1.0-K"); +MODULE_VERSION("1.2.1.1-k"); MODULE_ALIAS("dmi:*:svnVMware*:*"); MODULE_ALIAS("vmware_vmmemctl"); MODULE_LICENSE("GPL"); @@ -101,6 +101,8 @@ MODULE_LICENSE("GPL"); /* Maximum number of page allocations without yielding processor */ #define VMW_BALLOON_YIELD_THRESHOLD 1024 +/* Maximum number of refused pages we accumulate during inflation cycle */ +#define VMW_BALLOON_MAX_REFUSED 16 /* * Hypervisor communication port definitions. @@ -183,6 +185,7 @@ struct vmballoon { /* transient list of non-balloonable pages */ struct list_head refused_pages; + unsigned int n_refused_pages; /* balloon size in pages */ unsigned int size; @@ -428,14 +431,21 @@ static int vmballoon_reserve_page(struct vmballoon *b, bool can_sleep) /* inform monitor */ locked = vmballoon_send_lock_page(b, page_to_pfn(page)); if (!locked) { + STATS_INC(b->stats.refused_alloc); + if (b->reset_required) { __free_page(page); return -EIO; } - /* place on list of non-balloonable pages, retry allocation */ + /* + * Place page on the list of non-balloonable pages + * and retry allocation, unless we already accumulated + * too many of them, in which case take a breather. + */ list_add(&page->lru, &b->refused_pages); - STATS_INC(b->stats.refused_alloc); + if (++b->n_refused_pages >= VMW_BALLOON_MAX_REFUSED) + return -EIO; } } while (!locked); @@ -483,6 +493,8 @@ static void vmballoon_release_refused_pages(struct vmballoon *b) __free_page(page); STATS_INC(b->stats.refused_free); } + + b->n_refused_pages = 0; } /* |