diff options
Diffstat (limited to 'drivers/mmc')
| -rw-r--r-- | drivers/mmc/core/host.c | 70 | ||||
| -rw-r--r-- | drivers/mmc/core/mmc.c | 40 | ||||
| -rw-r--r-- | drivers/mmc/core/sdio_bus.c | 12 | ||||
| -rw-r--r-- | drivers/mmc/host/dw_mmc.c | 20 | ||||
| -rw-r--r-- | drivers/mmc/host/s3cmci.c | 1 | ||||
| -rw-r--r-- | drivers/mmc/host/sdhci-of-at91.c | 35 |
6 files changed, 111 insertions, 67 deletions
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index 98f25ff..848b345 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -179,19 +179,17 @@ static void mmc_retune_timer(unsigned long data) */ int mmc_of_parse(struct mmc_host *host) { - struct device_node *np; + struct device *dev = host->parent; u32 bus_width; int ret; bool cd_cap_invert, cd_gpio_invert = false; bool ro_cap_invert, ro_gpio_invert = false; - if (!host->parent || !host->parent->of_node) + if (!dev || !dev_fwnode(dev)) return 0; - np = host->parent->of_node; - /* "bus-width" is translated to MMC_CAP_*_BIT_DATA flags */ - if (of_property_read_u32(np, "bus-width", &bus_width) < 0) { + if (device_property_read_u32(dev, "bus-width", &bus_width) < 0) { dev_dbg(host->parent, "\"bus-width\" property is missing, assuming 1 bit.\n"); bus_width = 1; @@ -213,7 +211,7 @@ int mmc_of_parse(struct mmc_host *host) } /* f_max is obtained from the optional "max-frequency" property */ - of_property_read_u32(np, "max-frequency", &host->f_max); + device_property_read_u32(dev, "max-frequency", &host->f_max); /* * Configure CD and WP pins. They are both by default active low to @@ -228,12 +226,12 @@ int mmc_of_parse(struct mmc_host *host) */ /* Parse Card Detection */ - if (of_property_read_bool(np, "non-removable")) { + if (device_property_read_bool(dev, "non-removable")) { host->caps |= MMC_CAP_NONREMOVABLE; } else { - cd_cap_invert = of_property_read_bool(np, "cd-inverted"); + cd_cap_invert = device_property_read_bool(dev, "cd-inverted"); - if (of_property_read_bool(np, "broken-cd")) + if (device_property_read_bool(dev, "broken-cd")) host->caps |= MMC_CAP_NEEDS_POLL; ret = mmc_gpiod_request_cd(host, "cd", 0, true, @@ -259,7 +257,7 @@ int mmc_of_parse(struct mmc_host *host) } /* Parse Write Protection */ - ro_cap_invert = of_property_read_bool(np, "wp-inverted"); + ro_cap_invert = device_property_read_bool(dev, "wp-inverted"); ret = mmc_gpiod_request_ro(host, "wp", 0, false, 0, &ro_gpio_invert); if (!ret) @@ -267,62 +265,62 @@ int mmc_of_parse(struct mmc_host *host) else if (ret != -ENOENT && ret != -ENOSYS) return ret; - if (of_property_read_bool(np, "disable-wp")) + if (device_property_read_bool(dev, "disable-wp")) host->caps2 |= MMC_CAP2_NO_WRITE_PROTECT; /* See the comment on CD inversion above */ if (ro_cap_invert ^ ro_gpio_invert) host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; - if (of_property_read_bool(np, "cap-sd-highspeed")) + if (device_property_read_bool(dev, "cap-sd-highspeed")) host->caps |= MMC_CAP_SD_HIGHSPEED; - if (of_property_read_bool(np, "cap-mmc-highspeed")) + if (device_property_read_bool(dev, "cap-mmc-highspeed")) host->caps |= MMC_CAP_MMC_HIGHSPEED; - if (of_property_read_bool(np, "sd-uhs-sdr12")) + if (device_property_read_bool(dev, "sd-uhs-sdr12")) host->caps |= MMC_CAP_UHS_SDR12; - if (of_property_read_bool(np, "sd-uhs-sdr25")) + if (device_property_read_bool(dev, "sd-uhs-sdr25")) host->caps |= MMC_CAP_UHS_SDR25; - if (of_property_read_bool(np, "sd-uhs-sdr50")) + if (device_property_read_bool(dev, "sd-uhs-sdr50")) host->caps |= MMC_CAP_UHS_SDR50; - if (of_property_read_bool(np, "sd-uhs-sdr104")) + if (device_property_read_bool(dev, "sd-uhs-sdr104")) host->caps |= MMC_CAP_UHS_SDR104; - if (of_property_read_bool(np, "sd-uhs-ddr50")) + if (device_property_read_bool(dev, "sd-uhs-ddr50")) host->caps |= MMC_CAP_UHS_DDR50; - if (of_property_read_bool(np, "cap-power-off-card")) + if (device_property_read_bool(dev, "cap-power-off-card")) host->caps |= MMC_CAP_POWER_OFF_CARD; - if (of_property_read_bool(np, "cap-mmc-hw-reset")) + if (device_property_read_bool(dev, "cap-mmc-hw-reset")) host->caps |= MMC_CAP_HW_RESET; - if (of_property_read_bool(np, "cap-sdio-irq")) + if (device_property_read_bool(dev, "cap-sdio-irq")) host->caps |= MMC_CAP_SDIO_IRQ; - if (of_property_read_bool(np, "full-pwr-cycle")) + if (device_property_read_bool(dev, "full-pwr-cycle")) host->caps2 |= MMC_CAP2_FULL_PWR_CYCLE; - if (of_property_read_bool(np, "keep-power-in-suspend")) + if (device_property_read_bool(dev, "keep-power-in-suspend")) host->pm_caps |= MMC_PM_KEEP_POWER; - if (of_property_read_bool(np, "wakeup-source") || - of_property_read_bool(np, "enable-sdio-wakeup")) /* legacy */ + if (device_property_read_bool(dev, "wakeup-source") || + device_property_read_bool(dev, "enable-sdio-wakeup")) /* legacy */ host->pm_caps |= MMC_PM_WAKE_SDIO_IRQ; - if (of_property_read_bool(np, "mmc-ddr-1_8v")) + if (device_property_read_bool(dev, "mmc-ddr-1_8v")) host->caps |= MMC_CAP_1_8V_DDR; - if (of_property_read_bool(np, "mmc-ddr-1_2v")) + if (device_property_read_bool(dev, "mmc-ddr-1_2v")) host->caps |= MMC_CAP_1_2V_DDR; - if (of_property_read_bool(np, "mmc-hs200-1_8v")) + if (device_property_read_bool(dev, "mmc-hs200-1_8v")) host->caps2 |= MMC_CAP2_HS200_1_8V_SDR; - if (of_property_read_bool(np, "mmc-hs200-1_2v")) + if (device_property_read_bool(dev, "mmc-hs200-1_2v")) host->caps2 |= MMC_CAP2_HS200_1_2V_SDR; - if (of_property_read_bool(np, "mmc-hs400-1_8v")) + if (device_property_read_bool(dev, "mmc-hs400-1_8v")) host->caps2 |= MMC_CAP2_HS400_1_8V | MMC_CAP2_HS200_1_8V_SDR; - if (of_property_read_bool(np, "mmc-hs400-1_2v")) + if (device_property_read_bool(dev, "mmc-hs400-1_2v")) host->caps2 |= MMC_CAP2_HS400_1_2V | MMC_CAP2_HS200_1_2V_SDR; - if (of_property_read_bool(np, "mmc-hs400-enhanced-strobe")) + if (device_property_read_bool(dev, "mmc-hs400-enhanced-strobe")) host->caps2 |= MMC_CAP2_HS400_ES; - if (of_property_read_bool(np, "no-sdio")) + if (device_property_read_bool(dev, "no-sdio")) host->caps2 |= MMC_CAP2_NO_SDIO; - if (of_property_read_bool(np, "no-sd")) + if (device_property_read_bool(dev, "no-sd")) host->caps2 |= MMC_CAP2_NO_SD; - if (of_property_read_bool(np, "no-mmc")) + if (device_property_read_bool(dev, "no-mmc")) host->caps2 |= MMC_CAP2_NO_MMC; - host->dsr_req = !of_property_read_u32(np, "dsr", &host->dsr); + host->dsr_req = !device_property_read_u32(dev, "dsr", &host->dsr); if (host->dsr_req && (host->dsr & ~0xffff)) { dev_err(host->parent, "device tree specified broken value for DSR: 0x%x, ignoring\n", diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index f57700c..4f4a627 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -1255,10 +1255,27 @@ out_err: return err; } +static void mmc_select_driver_type(struct mmc_card *card) +{ + int card_drv_type, drive_strength, drv_type; + + card_drv_type = card->ext_csd.raw_driver_strength | + mmc_driver_type_mask(0); + + drive_strength = mmc_select_drive_strength(card, + card->ext_csd.hs200_max_dtr, + card_drv_type, &drv_type); + + card->drive_strength = drive_strength; + + if (drv_type) + mmc_set_driver_type(card->host, drv_type); +} + static int mmc_select_hs400es(struct mmc_card *card) { struct mmc_host *host = card->host; - int err = 0; + int err = -EINVAL; u8 val; if (!(host->caps & MMC_CAP_8_BIT_DATA)) { @@ -1303,6 +1320,8 @@ static int mmc_select_hs400es(struct mmc_card *card) goto out_err; } + mmc_select_driver_type(card); + /* Switch card to HS400 */ val = EXT_CSD_TIMING_HS400 | card->drive_strength << EXT_CSD_DRV_STR_SHIFT; @@ -1336,23 +1355,6 @@ out_err: return err; } -static void mmc_select_driver_type(struct mmc_card *card) -{ - int card_drv_type, drive_strength, drv_type; - - card_drv_type = card->ext_csd.raw_driver_strength | - mmc_driver_type_mask(0); - - drive_strength = mmc_select_drive_strength(card, - card->ext_csd.hs200_max_dtr, - card_drv_type, &drv_type); - - card->drive_strength = drive_strength; - - if (drv_type) - mmc_set_driver_type(card->host, drv_type); -} - /* * For device supporting HS200 mode, the following sequence * should be done before executing the tuning process. @@ -1690,7 +1692,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, err = mmc_select_hs400(card); if (err) goto free_card; - } else { + } else if (!mmc_card_hs400es(card)) { /* Select the desired bus width optionally */ err = mmc_select_bus_width(card); if (err > 0 && mmc_card_hs(card)) { diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c index 86f5b32..d56a3b6 100644 --- a/drivers/mmc/core/sdio_bus.c +++ b/drivers/mmc/core/sdio_bus.c @@ -266,7 +266,7 @@ static void sdio_release_func(struct device *dev) sdio_free_func_cis(func); kfree(func->info); - + kfree(func->tmpbuf); kfree(func); } @@ -281,6 +281,16 @@ struct sdio_func *sdio_alloc_func(struct mmc_card *card) if (!func) return ERR_PTR(-ENOMEM); + /* + * allocate buffer separately to make sure it's properly aligned for + * DMA usage (incl. 64 bit DMA) + */ + func->tmpbuf = kmalloc(4, GFP_KERNEL); + if (!func->tmpbuf) { + kfree(func); + return ERR_PTR(-ENOMEM); + } + func->card = card; device_initialize(&func->dev); diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index df478ae..f81f417 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -2610,8 +2610,8 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id) host->slot[id] = slot; mmc->ops = &dw_mci_ops; - if (of_property_read_u32_array(host->dev->of_node, - "clock-freq-min-max", freq, 2)) { + if (device_property_read_u32_array(host->dev, "clock-freq-min-max", + freq, 2)) { mmc->f_min = DW_MCI_FREQ_MIN; mmc->f_max = DW_MCI_FREQ_MAX; } else { @@ -2709,7 +2709,6 @@ static void dw_mci_init_dma(struct dw_mci *host) { int addr_config; struct device *dev = host->dev; - struct device_node *np = dev->of_node; /* * Check tansfer mode from HCON[17:16] @@ -2770,8 +2769,9 @@ static void dw_mci_init_dma(struct dw_mci *host) dev_info(host->dev, "Using internal DMA controller.\n"); } else { /* TRANS_MODE_EDMAC: check dma bindings again */ - if ((of_property_count_strings(np, "dma-names") < 0) || - (!of_find_property(np, "dmas", NULL))) { + if ((device_property_read_string_array(dev, "dma-names", + NULL, 0) < 0) || + !device_property_present(dev, "dmas")) { goto no_dma; } host->dma_ops = &dw_mci_edmac_ops; @@ -2931,7 +2931,6 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host) { struct dw_mci_board *pdata; struct device *dev = host->dev; - struct device_node *np = dev->of_node; const struct dw_mci_drv_data *drv_data = host->drv_data; int ret; u32 clock_frequency; @@ -2948,15 +2947,16 @@ static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host) } /* find out number of slots supported */ - of_property_read_u32(np, "num-slots", &pdata->num_slots); + device_property_read_u32(dev, "num-slots", &pdata->num_slots); - if (of_property_read_u32(np, "fifo-depth", &pdata->fifo_depth)) + if (device_property_read_u32(dev, "fifo-depth", &pdata->fifo_depth)) dev_info(dev, "fifo-depth property not found, using value of FIFOTH register as default\n"); - of_property_read_u32(np, "card-detect-delay", &pdata->detect_delay_ms); + device_property_read_u32(dev, "card-detect-delay", + &pdata->detect_delay_ms); - if (!of_property_read_u32(np, "clock-frequency", &clock_frequency)) + if (!device_property_read_u32(dev, "clock-frequency", &clock_frequency)) pdata->bus_hz = clock_frequency; if (drv_data && drv_data->parse_dt) { diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index c531dee..8f27fe3 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -21,6 +21,7 @@ #include <linux/debugfs.h> #include <linux/seq_file.h> #include <linux/gpio.h> +#include <linux/interrupt.h> #include <linux/irq.h> #include <linux/io.h> diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c index a8b430f..83b84ff 100644 --- a/drivers/mmc/host/sdhci-of-at91.c +++ b/drivers/mmc/host/sdhci-of-at91.c @@ -31,6 +31,7 @@ #define SDMMC_MC1R 0x204 #define SDMMC_MC1R_DDR BIT(3) +#define SDMMC_MC1R_FCD BIT(7) #define SDMMC_CACR 0x230 #define SDMMC_CACR_CAPWREN BIT(0) #define SDMMC_CACR_KEY (0x46 << 8) @@ -43,6 +44,15 @@ struct sdhci_at91_priv { struct clk *mainck; }; +static void sdhci_at91_set_force_card_detect(struct sdhci_host *host) +{ + u8 mc1r; + + mc1r = readb(host->ioaddr + SDMMC_MC1R); + mc1r |= SDMMC_MC1R_FCD; + writeb(mc1r, host->ioaddr + SDMMC_MC1R); +} + static void sdhci_at91_set_clock(struct sdhci_host *host, unsigned int clock) { u16 clk; @@ -112,10 +122,18 @@ void sdhci_at91_set_uhs_signaling(struct sdhci_host *host, unsigned int timing) sdhci_set_uhs_signaling(host, timing); } +static void sdhci_at91_reset(struct sdhci_host *host, u8 mask) +{ + sdhci_reset(host, mask); + + if (host->mmc->caps & MMC_CAP_NONREMOVABLE) + sdhci_at91_set_force_card_detect(host); +} + static const struct sdhci_ops sdhci_at91_sama5d2_ops = { .set_clock = sdhci_at91_set_clock, .set_bus_width = sdhci_set_bus_width, - .reset = sdhci_reset, + .reset = sdhci_at91_reset, .set_uhs_signaling = sdhci_at91_set_uhs_signaling, .set_power = sdhci_at91_set_power, }; @@ -322,6 +340,21 @@ static int sdhci_at91_probe(struct platform_device *pdev) host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION; } + /* + * If the device attached to the MMC bus is not removable, it is safer + * to set the Force Card Detect bit. People often don't connect the + * card detect signal and use this pin for another purpose. If the card + * detect pin is not muxed to SDHCI controller, a default value is + * used. This value can be different from a SoC revision to another + * one. Problems come when this default value is not card present. To + * avoid this case, if the device is non removable then the card + * detection procedure using the SDMCC_CD signal is bypassed. + * This bit is reset when a software reset for all command is performed + * so we need to implement our own reset function to set back this bit. + */ + if (host->mmc->caps & MMC_CAP_NONREMOVABLE) + sdhci_at91_set_force_card_detect(host); + pm_runtime_put_autosuspend(&pdev->dev); return 0; |