diff options
Diffstat (limited to 'drivers/mmc')
28 files changed, 906 insertions, 436 deletions
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 452782b..ede41f0 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -2028,8 +2028,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) /* complete ongoing async transfer before issuing discard */ if (card->host->areq) mmc_blk_issue_rw_rq(mq, NULL); - if (req->cmd_flags & REQ_SECURE && - !(card->quirks & MMC_QUIRK_SEC_ERASE_TRIM_BROKEN)) + if (req->cmd_flags & REQ_SECURE) ret = mmc_blk_issue_secdiscard_rq(mq, req); else ret = mmc_blk_issue_discard_rq(mq, req); @@ -2432,6 +2431,8 @@ static int mmc_blk_probe(struct mmc_card *card) if (!(card->csd.cmdclass & CCC_BLOCK_READ)) return -ENODEV; + mmc_fixup_device(card, blk_fixups); + md = mmc_blk_alloc(card); if (IS_ERR(md)) return PTR_ERR(md); @@ -2446,7 +2447,6 @@ static int mmc_blk_probe(struct mmc_card *card) goto out; mmc_set_drvdata(card, md); - mmc_fixup_device(card, blk_fixups); if (mmc_add_disk(md)) goto out; diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c index d2dbf02..8a1f124 100644 --- a/drivers/mmc/core/bus.c +++ b/drivers/mmc/core/bus.c @@ -180,7 +180,6 @@ static int mmc_bus_resume(struct device *dev) #endif #ifdef CONFIG_PM_RUNTIME - static int mmc_runtime_suspend(struct device *dev) { struct mmc_card *card = mmc_dev_to_card(dev); @@ -196,17 +195,10 @@ static int mmc_runtime_resume(struct device *dev) return host->bus_ops->runtime_resume(host); } - -static int mmc_runtime_idle(struct device *dev) -{ - return 0; -} - #endif /* !CONFIG_PM_RUNTIME */ static const struct dev_pm_ops mmc_bus_pm_ops = { - SET_RUNTIME_PM_OPS(mmc_runtime_suspend, mmc_runtime_resume, - mmc_runtime_idle) + SET_RUNTIME_PM_OPS(mmc_runtime_suspend, mmc_runtime_resume, NULL) SET_SYSTEM_SLEEP_PM_OPS(mmc_bus_suspend, mmc_bus_resume) }; diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 7dc0c85..d03a080 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -2102,7 +2102,8 @@ EXPORT_SYMBOL(mmc_can_sanitize); int mmc_can_secure_erase_trim(struct mmc_card *card) { - if (card->ext_csd.sec_feature_support & EXT_CSD_SEC_ER_EN) + if ((card->ext_csd.sec_feature_support & EXT_CSD_SEC_ER_EN) && + !(card->quirks & MMC_QUIRK_SEC_ERASE_TRIM_BROKEN)) return 1; return 0; } diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 793c6f7..1eda8dd 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -324,13 +324,12 @@ static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd) } } + /* + * The EXT_CSD format is meant to be forward compatible. As long + * as CSD_STRUCTURE does not change, all values for EXT_CSD_REV + * are authorized, see JEDEC JESD84-B50 section B.8. + */ card->ext_csd.rev = ext_csd[EXT_CSD_REV]; - if (card->ext_csd.rev > 7) { - pr_err("%s: unrecognised EXT_CSD revision %d\n", - mmc_hostname(card->host), card->ext_csd.rev); - err = -EINVAL; - goto out; - } card->ext_csd.raw_sectors[0] = ext_csd[EXT_CSD_SEC_CNT + 0]; card->ext_csd.raw_sectors[1] = ext_csd[EXT_CSD_SEC_CNT + 1]; diff --git a/drivers/mmc/core/quirks.c b/drivers/mmc/core/quirks.c index 6c36fcc..dd1d1e0 100644 --- a/drivers/mmc/core/quirks.c +++ b/drivers/mmc/core/quirks.c @@ -91,7 +91,7 @@ void mmc_fixup_device(struct mmc_card *card, const struct mmc_fixup *table) (f->cis_device == card->cis.device || f->cis_device == (u16) SDIO_ANY_ID) && rev >= f->rev_start && rev <= f->rev_end) { - dev_dbg(&card->dev, "calling %pF\n", f->vendor_fixup); + dev_dbg(&card->dev, "calling %pf\n", f->vendor_fixup); f->vendor_fixup(card, f->data); } } diff --git a/drivers/mmc/core/sd_ops.c b/drivers/mmc/core/sd_ops.c index 274ef00..48d0c93 100644 --- a/drivers/mmc/core/sd_ops.c +++ b/drivers/mmc/core/sd_ops.c @@ -184,6 +184,9 @@ int mmc_send_app_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr) mmc_delay(10); } + if (!i) + pr_err("%s: card never left busy state\n", mmc_hostname(host)); + if (rocr && !mmc_host_is_spi(host)) *rocr = cmd.resp[0]; diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index a565254..4511358 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -290,6 +290,18 @@ config MMC_MOXART be found on some embedded hardware such as UC-7112-LX. If you have a controller with this interface, say Y here. +config MMC_SDHCI_ST + tristate "SDHCI support on STMicroelectronics SoC" + depends on ARCH_STI + depends on MMC_SDHCI_PLTFM + select MMC_SDHCI_IO_ACCESSORS + help + This selects the Secure Digital Host Controller Interface in + STMicroelectronics SoCs. + + If you have a controller with this interface, say Y or M here. + If unsure, say N. + config MMC_OMAP tristate "TI OMAP Multimedia Card Interface support" depends on ARCH_OMAP @@ -303,6 +315,7 @@ config MMC_OMAP config MMC_OMAP_HS tristate "TI OMAP High Speed Multimedia Card Interface support" + depends on HAS_DMA depends on ARCH_OMAP2PLUS || COMPILE_TEST help This selects the TI OMAP High Speed Multimedia card Interface. @@ -343,7 +356,7 @@ config MMC_ATMELMCI config MMC_SDHCI_MSM tristate "Qualcomm SDHCI Controller Support" - depends on ARCH_QCOM + depends on ARCH_QCOM || (ARM && COMPILE_TEST) depends on MMC_SDHCI_PLTFM help This selects the Secure Digital Host Controller Interface (SDHCI) @@ -440,6 +453,7 @@ config MMC_SPI config MMC_S3C tristate "Samsung S3C SD/MMC Card Interface support" depends on ARCH_S3C24XX + depends on S3C24XX_DMAC help This selects a driver for the MCI interface found in Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs. @@ -477,15 +491,6 @@ config MMC_S3C_DMA working properly and needs to be debugged before this option is useful. -config MMC_S3C_PIODMA - bool "Support for both PIO and DMA" - help - Compile both the PIO and DMA transfer routines into the - driver and let the platform select at run-time which one - is best. - - See notes for the DMA option. - endchoice config MMC_SDRICOH_CS @@ -623,7 +628,7 @@ config MMC_DW_PCI config MMC_SH_MMCIF tristate "SuperH Internal MMCIF support" - depends on MMC_BLOCK + depends on MMC_BLOCK && HAS_DMA depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST help This selects the MMC Host Interface controller (MMCIF). @@ -697,6 +702,7 @@ config MMC_WMT config MMC_USDHI6ROL0 tristate "Renesas USDHI6ROL0 SD/SDIO Host Controller support" + depends on HAS_DMA help This selects support for the Renesas USDHI6ROL0 SD/SDIO Host Controller diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index 7f81ddf..f211eed 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -68,6 +68,7 @@ obj-$(CONFIG_MMC_SDHCI_OF_HLWD) += sdhci-of-hlwd.o obj-$(CONFIG_MMC_SDHCI_BCM_KONA) += sdhci-bcm-kona.o obj-$(CONFIG_MMC_SDHCI_BCM2835) += sdhci-bcm2835.o obj-$(CONFIG_MMC_SDHCI_MSM) += sdhci-msm.o +obj-$(CONFIG_MMC_SDHCI_ST) += sdhci-st.o ifeq ($(CONFIG_CB710_DEBUG),y) CFLAGS-cb710-mmc += -DDEBUG diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 1ac227c..8f216ed 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -111,8 +111,7 @@ static const u8 tuning_blk_pattern_8bit[] = { 0xff, 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee, }; -static inline bool dw_mci_fifo_reset(struct dw_mci *host); -static inline bool dw_mci_ctrl_all_reset(struct dw_mci *host); +static bool dw_mci_reset(struct dw_mci *host); #if defined(CONFIG_DEBUG_FS) static int dw_mci_req_show(struct seq_file *s, void *v) @@ -997,7 +996,8 @@ static int dw_mci_get_ro(struct mmc_host *mmc) int gpio_ro = mmc_gpio_get_ro(mmc); /* Use platform get_ro function, else try on board write protect */ - if (slot->quirks & DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT) + if ((slot->quirks & DW_MCI_SLOT_QUIRK_NO_WRITE_PROTECT) || + (slot->host->quirks & DW_MCI_QUIRK_NO_WRITE_PROTECT)) read_only = 0; else if (!IS_ERR_VALUE(gpio_ro)) read_only = gpio_ro; @@ -1235,7 +1235,7 @@ static int dw_mci_data_complete(struct dw_mci *host, struct mmc_data *data) * After an error, there may be data lingering * in the FIFO */ - dw_mci_fifo_reset(host); + dw_mci_reset(host); } else { data->bytes_xfered = data->blocks * data->blksz; data->error = 0; @@ -1352,7 +1352,7 @@ static void dw_mci_tasklet_func(unsigned long priv) /* CMD error in data command */ if (mrq->cmd->error && mrq->data) - dw_mci_fifo_reset(host); + dw_mci_reset(host); host->cmd = NULL; host->data = NULL; @@ -1963,14 +1963,8 @@ static void dw_mci_work_routine_card(struct work_struct *work) } /* Power down slot */ - if (present == 0) { - /* Clear down the FIFO */ - dw_mci_fifo_reset(host); -#ifdef CONFIG_MMC_DW_IDMAC - dw_mci_idmac_reset(host); -#endif - - } + if (present == 0) + dw_mci_reset(host); spin_unlock_bh(&host->lock); @@ -2021,8 +2015,11 @@ static int dw_mci_of_get_slot_quirks(struct device *dev, u8 slot) /* get quirks */ for (idx = 0; idx < ARRAY_SIZE(of_slot_quirks); idx++) - if (of_get_property(np, of_slot_quirks[idx].quirk, NULL)) + if (of_get_property(np, of_slot_quirks[idx].quirk, NULL)) { + dev_warn(dev, "Slot quirk %s is deprecated\n", + of_slot_quirks[idx].quirk); quirks |= of_slot_quirks[idx].id; + } return quirks; } @@ -2208,8 +2205,11 @@ static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset) return false; } -static inline bool dw_mci_fifo_reset(struct dw_mci *host) +static bool dw_mci_reset(struct dw_mci *host) { + u32 flags = SDMMC_CTRL_RESET | SDMMC_CTRL_FIFO_RESET; + bool ret = false; + /* * Reseting generates a block interrupt, hence setting * the scatter-gather pointer to NULL. @@ -2219,15 +2219,60 @@ static inline bool dw_mci_fifo_reset(struct dw_mci *host) host->sg = NULL; } - return dw_mci_ctrl_reset(host, SDMMC_CTRL_FIFO_RESET); -} + if (host->use_dma) + flags |= SDMMC_CTRL_DMA_RESET; -static inline bool dw_mci_ctrl_all_reset(struct dw_mci *host) -{ - return dw_mci_ctrl_reset(host, - SDMMC_CTRL_FIFO_RESET | - SDMMC_CTRL_RESET | - SDMMC_CTRL_DMA_RESET); + if (dw_mci_ctrl_reset(host, flags)) { + /* + * In all cases we clear the RAWINTS register to clear any + * interrupts. + */ + mci_writel(host, RINTSTS, 0xFFFFFFFF); + + /* if using dma we wait for dma_req to clear */ + if (host->use_dma) { + unsigned long timeout = jiffies + msecs_to_jiffies(500); + u32 status; + do { + status = mci_readl(host, STATUS); + if (!(status & SDMMC_STATUS_DMA_REQ)) + break; + cpu_relax(); + } while (time_before(jiffies, timeout)); + + if (status & SDMMC_STATUS_DMA_REQ) { + dev_err(host->dev, + "%s: Timeout waiting for dma_req to " + "clear during reset\n", __func__); + goto ciu_out; + } + + /* when using DMA next we reset the fifo again */ + if (!dw_mci_ctrl_reset(host, SDMMC_CTRL_FIFO_RESET)) + goto ciu_out; + } + } else { + /* if the controller reset bit did clear, then set clock regs */ + if (!(mci_readl(host, CTRL) & SDMMC_CTRL_RESET)) { + dev_err(host->dev, "%s: fifo/dma reset bits didn't " + "clear but ciu was reset, doing clock update\n", + __func__); + goto ciu_out; + } + } + +#if IS_ENABLED(CONFIG_MMC_DW_IDMAC) + /* It is also recommended that we reset and reprogram idmac */ + dw_mci_idmac_reset(host); +#endif + + ret = true; + +ciu_out: + /* After a CTRL reset we need to have CIU set clock registers */ + mci_send_cmd(host->cur_slot, SDMMC_CMD_UPD_CLK, 0); + + return ret; } #ifdef CONFIG_OF @@ -2238,6 +2283,9 @@ static struct dw_mci_of_quirks { { .quirk = "broken-cd", .id = DW_MCI_QUIRK_BROKEN_CARD_DETECTION, + }, { + .quirk = "disable-wp", + .id = DW_MCI_QUIRK_NO_WRITE_PROTECT, }, }; @@ -2425,7 +2473,7 @@ int dw_mci_probe(struct dw_mci *host) } /* Reset all blocks */ - if (!dw_mci_ctrl_all_reset(host)) + if (!dw_mci_ctrl_reset(host, SDMMC_CTRL_ALL_RESET_FLAGS)) return -ENODEV; host->dma_ops = host->pdata->dma_ops; @@ -2612,7 +2660,7 @@ int dw_mci_resume(struct dw_mci *host) } } - if (!dw_mci_ctrl_all_reset(host)) { + if (!dw_mci_ctrl_reset(host, SDMMC_CTRL_ALL_RESET_FLAGS)) { ret = -ENODEV; return ret; } diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h index 738fa24..08fd956 100644 --- a/drivers/mmc/host/dw_mmc.h +++ b/drivers/mmc/host/dw_mmc.h @@ -129,6 +129,7 @@ #define SDMMC_CMD_INDX(n) ((n) & 0x1F) /* Status register defines */ #define SDMMC_GET_FCNT(x) (((x)>>17) & 0x1FFF) +#define SDMMC_STATUS_DMA_REQ BIT(31) /* FIFOTH register defines */ #define SDMMC_SET_FIFOTH(m, r, t) (((m) & 0x7) << 28 | \ ((r) & 0xFFF) << 16 | \ @@ -150,6 +151,10 @@ /* Card read threshold */ #define SDMMC_SET_RD_THLD(v, x) (((v) & 0x1FFF) << 16 | (x)) +/* All ctrl reset bits */ +#define SDMMC_CTRL_ALL_RESET_FLAGS \ + (SDMMC_CTRL_RESET | SDMMC_CTRL_FIFO_RESET | SDMMC_CTRL_DMA_RESET) + /* Register access macros */ #define mci_readl(dev, reg) \ __raw_readl((dev)->regs + SDMMC_##reg) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index 7ad463e..e4d4707 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -52,34 +52,53 @@ static unsigned int fmax = 515633; * struct variant_data - MMCI variant-specific quirks * @clkreg: default value for MCICLOCK register * @clkreg_enable: enable value for MMCICLOCK register + * @clkreg_8bit_bus_enable: enable value for 8 bit bus + * @clkreg_neg_edge_enable: enable value for inverted data/cmd output * @datalength_bits: number of bits in the MMCIDATALENGTH register * @fifosize: number of bytes that can be written when MMCI_TXFIFOEMPTY * is asserted (likewise for RX) * @fifohalfsize: number of bytes that can be written when MCI_TXFIFOHALFEMPTY * is asserted (likewise for RX) + * @data_cmd_enable: enable value for data commands. * @sdio: variant supports SDIO * @st_clkdiv: true if using a ST-specific clock divider algorithm + * @datactrl_mask_ddrmode: ddr mode mask in datactrl register. * @blksz_datactrl16: true if Block size is at b16..b30 position in datactrl register + * @blksz_datactrl4: true if Block size is at b4..b16 position in datactrl + * register * @pwrreg_powerup: power up value for MMCIPOWER register + * @f_max: maximum clk frequency supported by the controller. * @signal_direction: input/out direction of bus signals can be indicated * @pwrreg_clkgate: MMCIPOWER register must be used to gate the clock * @busy_detect: true if busy detection on dat0 is supported * @pwrreg_nopower: bits in MMCIPOWER don't controls ext. power supply + * @explicit_mclk_control: enable explicit mclk control in driver. + * @qcom_fifo: enables qcom specific fifo pio read logic. + * @reversed_irq_handling: handle data irq before cmd irq. */ struct variant_data { unsigned int clkreg; unsigned int clkreg_enable; + unsigned int clkreg_8bit_bus_enable; + unsigned int clkreg_neg_edge_enable; unsigned int datalength_bits; unsigned int fifosize; unsigned int fifohalfsize; + unsigned int data_cmd_enable; + unsigned int datactrl_mask_ddrmode; bool sdio; bool st_clkdiv; bool blksz_datactrl16; + bool blksz_datactrl4; u32 pwrreg_powerup; + u32 f_max; bool signal_direction; bool pwrreg_clkgate; bool busy_detect; bool pwrreg_nopower; + bool explicit_mclk_control; + bool qcom_fifo; + bool reversed_irq_handling; }; static struct variant_data variant_arm = { @@ -87,6 +106,8 @@ static struct variant_data variant_arm = { .fifohalfsize = 8 * 4, .datalength_bits = 16, .pwrreg_powerup = MCI_PWR_UP, + .f_max = 100000000, + .reversed_irq_handling = true, }; static struct variant_data variant_arm_extended_fifo = { @@ -94,6 +115,7 @@ static struct variant_data variant_arm_extended_fifo = { .fifohalfsize = 64 * 4, .datalength_bits = 16, .pwrreg_powerup = MCI_PWR_UP, + .f_max = 100000000, }; static struct variant_data variant_arm_extended_fifo_hwfc = { @@ -102,15 +124,18 @@ static struct variant_data variant_arm_extended_fifo_hwfc = { .clkreg_enable = MCI_ARM_HWFCEN, .datalength_bits = 16, .pwrreg_powerup = MCI_PWR_UP, + .f_max = 100000000, }; static struct variant_data variant_u300 = { .fifosize = 16 * 4, .fifohalfsize = 8 * 4, .clkreg_enable = MCI_ST_U300_HWFCEN, + .clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS, .datalength_bits = 16, .sdio = true, .pwrreg_powerup = MCI_PWR_ON, + .f_max = 100000000, .signal_direction = true, .pwrreg_clkgate = true, .pwrreg_nopower = true, @@ -124,6 +149,7 @@ static struct variant_data variant_nomadik = { .sdio = true, .st_clkdiv = true, .pwrreg_powerup = MCI_PWR_ON, + .f_max = 100000000, .signal_direction = true, .pwrreg_clkgate = true, .pwrreg_nopower = true, @@ -134,10 +160,13 @@ static struct variant_data variant_ux500 = { .fifohalfsize = 8 * 4, .clkreg = MCI_CLK_ENABLE, .clkreg_enable = MCI_ST_UX500_HWFCEN, + .clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS, + .clkreg_neg_edge_enable = MCI_ST_UX500_NEG_EDGE, .datalength_bits = 24, .sdio = true, .st_clkdiv = true, .pwrreg_powerup = MCI_PWR_ON, + .f_max = 100000000, .signal_direction = true, .pwrreg_clkgate = true, .busy_detect = true, @@ -149,17 +178,38 @@ static struct variant_data variant_ux500v2 = { .fifohalfsize = 8 * 4, .clkreg = MCI_CLK_ENABLE, .clkreg_enable = MCI_ST_UX500_HWFCEN, + .clkreg_8bit_bus_enable = MCI_ST_8BIT_BUS, + .clkreg_neg_edge_enable = MCI_ST_UX500_NEG_EDGE, + .datactrl_mask_ddrmode = MCI_ST_DPSM_DDRMODE, .datalength_bits = 24, .sdio = true, .st_clkdiv = true, .blksz_datactrl16 = true, .pwrreg_powerup = MCI_PWR_ON, + .f_max = 100000000, .signal_direction = true, .pwrreg_clkgate = true, .busy_detect = true, .pwrreg_nopower = true, }; +static struct variant_data variant_qcom = { + .fifosize = 16 * 4, + .fifohalfsize = 8 * 4, + .clkreg = MCI_CLK_ENABLE, + .clkreg_enable = MCI_QCOM_CLK_FLOWENA | + MCI_QCOM_CLK_SELECT_IN_FBCLK, + .clkreg_8bit_bus_enable = MCI_QCOM_CLK_WIDEBUS_8, + .datactrl_mask_ddrmode = MCI_QCOM_CLK_SELECT_IN_DDR_MODE, + .data_cmd_enable = MCI_QCOM_CSPM_DATCMD, + .blksz_datactrl4 = true, + .datalength_bits = 24, + .pwrreg_powerup = MCI_PWR_UP, + .f_max = 208000000, + .explicit_mclk_control = true, + .qcom_fifo = true, +}; + static int mmci_card_busy(struct mmc_host *mmc) { struct mmci_host *host = mmc_priv(mmc); @@ -260,7 +310,9 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired) host->cclk = 0; if (desired) { - if (desired >= host->mclk) { + if (variant->explicit_mclk_control) { + host->cclk = host->mclk; + } else if (desired >= host->mclk) { clk = MCI_CLK_BYPASS; if (variant->st_clkdiv) clk |= MCI_ST_UX500_NEG_EDGE; @@ -299,11 +351,11 @@ static void mmci_set_clkreg(struct mmci_host *host, unsigned int desired) if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4) clk |= MCI_4BIT_BUS; if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_8) - clk |= MCI_ST_8BIT_BUS; + clk |= variant->clkreg_8bit_bus_enable; if (host->mmc->ios.timing == MMC_TIMING_UHS_DDR50 || host->mmc->ios.timing == MMC_TIMING_MMC_DDR52) - clk |= MCI_ST_UX500_NEG_EDGE; + clk |= variant->clkreg_neg_edge_enable; mmci_write_clkreg(host, clk); } @@ -719,7 +771,7 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) data->bytes_xfered = 0; clks = (unsigned long long)data->timeout_ns * host->cclk; - do_div(clks, 1000000000UL); + do_div(clks, NSEC_PER_SEC); timeout = data->timeout_clks + (unsigned int)clks; @@ -732,6 +784,8 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) if (variant->blksz_datactrl16) datactrl = MCI_DPSM_ENABLE | (data->blksz << 16); + else if (variant->blksz_datactrl4) + datactrl = MCI_DPSM_ENABLE | (data->blksz << 4); else datactrl = MCI_DPSM_ENABLE | blksz_bits << 4; @@ -767,7 +821,7 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) if (host->mmc->ios.timing == MMC_TIMING_UHS_DDR50 || host->mmc->ios.timing == MMC_TIMING_MMC_DDR52) - datactrl |= MCI_ST_DPSM_DDRMODE; + datactrl |= variant->datactrl_mask_ddrmode; /* * Attempt to use DMA operation mode, if this @@ -812,7 +866,7 @@ mmci_start_command(struct mmci_host *host, struct mmc_command *cmd, u32 c) if (readl(base + MMCICOMMAND) & MCI_CPSM_ENABLE) { writel(0, base + MMCICOMMAND); - udelay(1); + mmci_reg_delay(host); } c |= cmd->opcode | MCI_CPSM_ENABLE; @@ -824,6 +878,9 @@ mmci_start_command(struct mmci_host *host, struct mmc_command *cmd, u32 c) if (/*interrupt*/0) c |= MCI_CPSM_INTERRUPT; + if (mmc_cmd_type(cmd) == MMC_CMD_ADTC) + c |= host->variant->data_cmd_enable; + host->cmd = cmd; writel(cmd->arg, base + MMCIARGUMENT); @@ -834,6 +891,10 @@ static void mmci_data_irq(struct mmci_host *host, struct mmc_data *data, unsigned int status) { + /* Make sure we have data to handle */ + if (!data) + return; + /* First check for errors */ if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_STARTBITERR| MCI_TXUNDERRUN|MCI_RXOVERRUN)) { @@ -902,9 +963,17 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd, unsigned int status) { void __iomem *base = host->base; - bool sbc = (cmd == host->mrq->sbc); - bool busy_resp = host->variant->busy_detect && - (cmd->flags & MMC_RSP_BUSY); + bool sbc, busy_resp; + + if (!cmd) + return; + + sbc = (cmd == host->mrq->sbc); + busy_resp = host->variant->busy_detect && (cmd->flags & MMC_RSP_BUSY); + + if (!((status|host->busy_status) & (MCI_CMDCRCFAIL|MCI_CMDTIMEOUT| + MCI_CMDSENT|MCI_CMDRESPEND))) + return; /* Check if we need to wait for busy completion. */ if (host->busy_status && (status & MCI_ST_CARDBUSY)) @@ -957,15 +1026,34 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd, } } +static int mmci_get_rx_fifocnt(struct mmci_host *host, u32 status, int remain) +{ + return remain - (readl(host->base + MMCIFIFOCNT) << 2); +} + +static int mmci_qcom_get_rx_fifocnt(struct mmci_host *host, u32 status, int r) +{ + /* + * on qcom SDCC4 only 8 words are used in each burst so only 8 addresses + * from the fifo range should be used + */ + if (status & MCI_RXFIFOHALFFULL) + return host->variant->fifohalfsize; + else if (status & MCI_RXDATAAVLBL) + return 4; + + return 0; +} + static int mmci_pio_read(struct mmci_host *host, char *buffer, unsigned int remain) { void __iomem *base = host->base; char *ptr = buffer; - u32 status; + u32 status = readl(host->base + MMCISTATUS); int host_remain = host->size; do { - int count = host_remain - (readl(base + MMCIFIFOCNT) << 2); + int count = host->get_rx_fifocnt(host, status, host_remain); if (count > remain) count = remain; @@ -1132,9 +1220,6 @@ static irqreturn_t mmci_irq(int irq, void *dev_id) spin_lock(&host->lock); do { - struct mmc_command *cmd; - struct mmc_data *data; - status = readl(host->base + MMCISTATUS); if (host->singleirq) { @@ -1154,16 +1239,13 @@ static irqreturn_t mmci_irq(int irq, void *dev_id) dev_dbg(mmc_dev(host->mmc), "irq0 (data+cmd) %08x\n", status); - cmd = host->cmd; - if ((status|host->busy_status) & (MCI_CMDCRCFAIL|MCI_CMDTIMEOUT| - MCI_CMDSENT|MCI_CMDRESPEND) && cmd) - mmci_cmd_irq(host, cmd, status); - - data = host->data; - if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_STARTBITERR| - MCI_TXUNDERRUN|MCI_RXOVERRUN|MCI_DATAEND| - MCI_DATABLOCKEND) && data) - mmci_data_irq(host, data, status); + if (host->variant->reversed_irq_handling) { + mmci_data_irq(host, host->data, status); + mmci_cmd_irq(host, host->cmd, status); + } else { + mmci_cmd_irq(host, host->cmd, status); + mmci_data_irq(host, host->data, status); + } /* Don't poll for busy completion in irq context. */ if (host->busy_status) @@ -1296,6 +1378,17 @@ static void mmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) if (!ios->clock && variant->pwrreg_clkgate) pwr &= ~MCI_PWR_ON; + if (host->variant->explicit_mclk_control && + ios->clock != host->clock_cache) { + ret = clk_set_rate(host->clk, ios->clock); + if (ret < 0) + dev_err(mmc_dev(host->mmc), + "Error setting clock rate (%d)\n", ret); + else + host->mclk = clk_get_rate(host->clk); + } + host->clock_cache = ios->clock; + spin_lock_irqsave(&host->lock, flags); mmci_set_clkreg(host, ios->clock); @@ -1443,6 +1536,11 @@ static int mmci_probe(struct amba_device *dev, if (ret) goto host_free; + if (variant->qcom_fifo) + host->get_rx_fifocnt = mmci_qcom_get_rx_fifocnt; + else + host->get_rx_fifocnt = mmci_get_rx_fifocnt; + host->plat = plat; host->variant = variant; host->mclk = clk_get_rate(host->clk); @@ -1451,8 +1549,8 @@ static int mmci_probe(struct amba_device *dev, * so we try to adjust the clock down to this, * (if possible). */ - if (host->mclk > 100000000) { - ret = clk_set_rate(host->clk, 100000000); + if (host->mclk > variant->f_max) { + ret = clk_set_rate(host->clk, variant->f_max); if (ret < 0) goto clk_disable; host->mclk = clk_get_rate(host->clk); @@ -1471,9 +1569,12 @@ static int mmci_probe(struct amba_device *dev, * The ARM and ST versions of the block have slightly different * clock divider equations which means that the minimum divider * differs too. + * on Qualcomm like controllers get the nearest minimum clock to 100Khz */ if (variant->st_clkdiv) mmc->f_min = DIV_ROUND_UP(host->mclk, 257); + else if (variant->explicit_mclk_control) + mmc->f_min = clk_round_rate(host->clk, 100000); else mmc->f_min = DIV_ROUND_UP(host->mclk, 512); /* @@ -1483,9 +1584,14 @@ static int mmci_probe(struct amba_device *dev, * the block, of course. */ if (mmc->f_max) - mmc->f_max = min(host->mclk, mmc->f_max); + mmc->f_max = variant->explicit_mclk_control ? + min(variant->f_max, mmc->f_max) : + min(host->mclk, mmc->f_max); else - mmc->f_max = min(host->mclk, fmax); + mmc->f_max = variant->explicit_mclk_control ? + fmax : min(host->mclk, fmax); + + dev_dbg(mmc_dev(mmc), "clocking block at %u Hz\n", mmc->f_max); /* Get regulators and the supported OCR mask */ @@ -1752,6 +1858,12 @@ static struct amba_id mmci_ids[] = { .mask = 0xf0ffffff, .data = &variant_ux500v2, }, + /* Qualcomm variants */ + { + .id = 0x00051180, + .mask = 0x000fffff, + .data = &variant_qcom, + }, { 0, 0 }, }; diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h index 347d942..a1f5e4f 100644 --- a/drivers/mmc/host/mmci.h +++ b/drivers/mmc/host/mmci.h @@ -41,6 +41,15 @@ /* Modified PL180 on Versatile Express platform */ #define MCI_ARM_HWFCEN (1 << 12) +/* Modified on Qualcomm Integrations */ +#define MCI_QCOM_CLK_WIDEBUS_8 (BIT(10) | BIT(11)) +#define MCI_QCOM_CLK_FLOWENA BIT(12) +#define MCI_QCOM_CLK_INVERTOUT BIT(13) + +/* select in latch data and command in */ +#define MCI_QCOM_CLK_SELECT_IN_FBCLK BIT(15) +#define MCI_QCOM_CLK_SELECT_IN_DDR_MODE (BIT(14) | BIT(15)) + #define MMCIARGUMENT 0x008 #define MMCICOMMAND 0x00c #define MCI_CPSM_RESPONSE (1 << 6) @@ -54,6 +63,14 @@ #define MCI_ST_NIEN (1 << 13) #define MCI_ST_CE_ATACMD (1 << 14) +/* Modified on Qualcomm Integrations */ +#define MCI_QCOM_CSPM_DATCMD BIT(12) +#define MCI_QCOM_CSPM_MCIABORT BIT(13) +#define MCI_QCOM_CSPM_CCSENABLE BIT(14) +#define MCI_QCOM_CSPM_CCSDISABLE BIT(15) +#define MCI_QCOM_CSPM_AUTO_CMD19 BIT(16) +#define MCI_QCOM_CSPM_AUTO_CMD21 BIT(21) + #define MMCIRESPCMD 0x010 #define MMCIRESPONSE0 0x014 #define MMCIRESPONSE1 0x018 @@ -191,6 +208,8 @@ struct mmci_host { spinlock_t lock; unsigned int mclk; + /* cached value of requested clk in set_ios */ + unsigned int clock_cache; unsigned int cclk; u32 pwr_reg; u32 pwr_reg_add; @@ -210,6 +229,7 @@ struct mmci_host { /* pio stuff */ struct sg_mapping_iter sg_miter; unsigned int size; + int (*get_rx_fifocnt)(struct mmci_host *h, u32 status, int remain); #ifdef CONFIG_DMA_ENGINE /* DMA stuff */ diff --git a/drivers/mmc/host/moxart-mmc.c b/drivers/mmc/host/moxart-mmc.c index 74924a0..b4b1efb 100644 --- a/drivers/mmc/host/moxart-mmc.c +++ b/drivers/mmc/host/moxart-mmc.c @@ -13,7 +13,6 @@ * warranty of any kind, whether express or implied. */ -#include <linux/version.h> #include <linux/module.h> #include <linux/init.h> #include <linux/platform_device.h> diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c index babfea0..140885a 100644 --- a/drivers/mmc/host/mxs-mmc.c +++ b/drivers/mmc/host/mxs-mmc.c @@ -86,7 +86,8 @@ static int mxs_mmc_get_cd(struct mmc_host *mmc) if (ret >= 0) return ret; - present = !(readl(ssp->base + HW_SSP_STATUS(ssp)) & + present = mmc->caps & MMC_CAP_NEEDS_POLL || + !(readl(ssp->base + HW_SSP_STATUS(ssp)) & BM_SSP_STATUS_CARD_DETECT); if (mmc->caps2 & MMC_CAP2_CD_ACTIVE_HIGH) diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 6b7b755..9656726 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -29,6 +29,7 @@ #include <linux/timer.h> #include <linux/clk.h> #include <linux/of.h> +#include <linux/of_irq.h> #include <linux/of_gpio.h> #include <linux/of_device.h> #include <linux/omap-dmaengine.h> @@ -36,6 +37,7 @@ #include <linux/mmc/core.h> #include <linux/mmc/mmc.h> #include <linux/io.h> +#include <linux/irq.h> #include <linux/gpio.h> #include <linux/regulator/consumer.h> #include <linux/pinctrl/consumer.h> @@ -54,6 +56,7 @@ #define OMAP_HSMMC_RSP54 0x0118 #define OMAP_HSMMC_RSP76 0x011C #define OMAP_HSMMC_DATA 0x0120 +#define OMAP_HSMMC_PSTATE 0x0124 #define OMAP_HSMMC_HCTL 0x0128 #define OMAP_HSMMC_SYSCTL 0x012C #define OMAP_HSMMC_STAT 0x0130 @@ -91,7 +94,10 @@ #define BCE (1 << 1) #define FOUR_BIT (1 << 1) #define HSPE (1 << 2) +#define IWE (1 << 24) #define DDR (1 << 19) +#define CLKEXTFREE (1 << 16) +#define CTPL (1 << 11) #define DW8 (1 << 5) #define OD 0x1 #define STAT_CLEAR 0xFFFFFFFF @@ -101,11 +107,15 @@ #define SRD (1 << 26) #define SOFTRESET (1 << 1) +/* PSTATE */ +#define DLEV_DAT(x) (1 << (20 + (x))) + /* Interrupt masks for IE and ISE register */ #define CC_EN (1 << 0) #define TC_EN (1 << 1) #define BWR_EN (1 << 4) #define BRR_EN (1 << 5) +#define CIRQ_EN (1 << 8) #define ERR_EN (1 << 15) #define CTO_EN (1 << 16) #define CCRC_EN (1 << 17) @@ -140,7 +150,6 @@ #define VDD_3V0 3000000 /* 300000 uV */ #define VDD_165_195 (ffs(MMC_VDD_165_195) - 1) -#define AUTO_CMD23 (1 << 1) /* Auto CMD23 support */ /* * One controller can have multiple slots, like on some omap boards using * omap.c controller driver. Luckily this is not currently done on any known @@ -194,6 +203,7 @@ struct omap_hsmmc_host { u32 sysctl; u32 capa; int irq; + int wake_irq; int use_dma, dma_ch; struct dma_chan *tx_chan; struct dma_chan *rx_chan; @@ -206,6 +216,9 @@ struct omap_hsmmc_host { int req_in_progress; unsigned long clk_rate; unsigned int flags; +#define AUTO_CMD23 (1 << 0) /* Auto CMD23 support */ +#define HSMMC_SDIO_IRQ_ENABLED (1 << 1) /* SDIO irq enabled */ +#define HSMMC_WAKE_IRQ_ENABLED (1 << 2) struct omap_hsmmc_next next_data; struct omap_mmc_platform_data *pdata; }; @@ -510,27 +523,40 @@ static void omap_hsmmc_stop_clock(struct omap_hsmmc_host *host) static void omap_hsmmc_enable_irq(struct omap_hsmmc_host *host, struct mmc_command *cmd) { - unsigned int irq_mask; + u32 irq_mask = INT_EN_MASK; + unsigned long flags; if (host->use_dma) - irq_mask = INT_EN_MASK & ~(BRR_EN | BWR_EN); - else - irq_mask = INT_EN_MASK; + irq_mask &= ~(BRR_EN | BWR_EN); /* Disable timeout for erases */ if (cmd->opcode == MMC_ERASE) irq_mask &= ~DTO_EN; + spin_lock_irqsave(&host->irq_lock, flags); OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR); OMAP_HSMMC_WRITE(host->base, ISE, irq_mask); + + /* latch pending CIRQ, but don't signal MMC core */ + if (host->flags & HSMMC_SDIO_IRQ_ENABLED) + irq_mask |= CIRQ_EN; OMAP_HSMMC_WRITE(host->base, IE, irq_mask); + spin_unlock_irqrestore(&host->irq_lock, flags); } static void omap_hsmmc_disable_irq(struct omap_hsmmc_host *host) { - OMAP_HSMMC_WRITE(host->base, ISE, 0); - OMAP_HSMMC_WRITE(host->base, IE, 0); + u32 irq_mask = 0; + unsigned long flags; + + spin_lock_irqsave(&host->irq_lock, flags); + /* no transfer running but need to keep cirq if enabled */ + if (host->flags & HSMMC_SDIO_IRQ_ENABLED) + irq_mask |= CIRQ_EN; + OMAP_HSMMC_WRITE(host->base, ISE, irq_mask); + OMAP_HSMMC_WRITE(host->base, IE, irq_mask); OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR); + spin_unlock_irqrestore(&host->irq_lock, flags); } /* Calculate divisor for the given clock frequency */ @@ -667,6 +693,9 @@ static int omap_hsmmc_context_restore(struct omap_hsmmc_host *host) capa = VS18; } + if (host->mmc->caps & MMC_CAP_SDIO_IRQ) + hctl |= IWE; + OMAP_HSMMC_WRITE(host->base, HCTL, OMAP_HSMMC_READ(host->base, HCTL) | hctl); @@ -681,7 +710,9 @@ static int omap_hsmmc_context_restore(struct omap_hsmmc_host *host) && time_before(jiffies, timeout)) ; - omap_hsmmc_disable_irq(host); + OMAP_HSMMC_WRITE(host->base, ISE, 0); + OMAP_HSMMC_WRITE(host->base, IE, 0); + OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR); /* Do not initialize card-specific things if the power is off */ if (host->power_mode == MMC_POWER_OFF) @@ -1118,8 +1149,12 @@ static irqreturn_t omap_hsmmc_irq(int irq, void *dev_id) int status; status = OMAP_HSMMC_READ(host->base, STAT); - while (status & INT_EN_MASK && host->req_in_progress) { - omap_hsmmc_do_irq(host, status); + while (status & (INT_EN_MASK | CIRQ_EN)) { + if (host->req_in_progress) + omap_hsmmc_do_irq(host, status); + + if (status & CIRQ_EN) + mmc_signal_sdio_irq(host->mmc); /* Flush posted write */ status = OMAP_HSMMC_READ(host->base, STAT); @@ -1128,6 +1163,22 @@ static irqreturn_t omap_hsmmc_irq(int irq, void *dev_id) return IRQ_HANDLED; } +static irqreturn_t omap_hsmmc_wake_irq(int irq, void *dev_id) +{ + struct omap_hsmmc_host *host = dev_id; + + /* cirq is level triggered, disable to avoid infinite loop */ + spin_lock(&host->irq_lock); + if (host->flags & HSMMC_WAKE_IRQ_ENABLED) { + disable_irq_nosync(host->wake_irq); + host->flags &= ~HSMMC_WAKE_IRQ_ENABLED; + } + spin_unlock(&host->irq_lock); + pm_request_resume(host->dev); /* no use counter */ + + return IRQ_HANDLED; +} + static void set_sd_bus_power(struct omap_hsmmc_host *host) { unsigned long i; @@ -1639,6 +1690,103 @@ static void omap_hsmmc_init_card(struct mmc_host *mmc, struct mmc_card *card) mmc_slot(host).init_card(card); } +static void omap_hsmmc_enable_sdio_irq(struct mmc_host *mmc, int enable) +{ + struct omap_hsmmc_host *host = mmc_priv(mmc); + u32 irq_mask, con; + unsigned long flags; + + spin_lock_irqsave(&host->irq_lock, flags); + + con = OMAP_HSMMC_READ(host->base, CON); + irq_mask = OMAP_HSMMC_READ(host->base, ISE); + if (enable) { + host->flags |= HSMMC_SDIO_IRQ_ENABLED; + irq_mask |= CIRQ_EN; + con |= CTPL | CLKEXTFREE; + } else { + host->flags &= ~HSMMC_SDIO_IRQ_ENABLED; + irq_mask &= ~CIRQ_EN; + con &= ~(CTPL | CLKEXTFREE); + } + OMAP_HSMMC_WRITE(host->base, CON, con); + OMAP_HSMMC_WRITE(host->base, IE, irq_mask); + + /* + * if enable, piggy back detection on current request + * but always disable immediately + */ + if (!host->req_in_progress || !enable) + OMAP_HSMMC_WRITE(host->base, ISE, irq_mask); + + /* flush posted write */ + OMAP_HSMMC_READ(host->base, IE); + + spin_unlock_irqrestore(&host->irq_lock, flags); +} + +static int omap_hsmmc_configure_wake_irq(struct omap_hsmmc_host *host) +{ + struct mmc_host *mmc = host->mmc; + int ret; + + /* + * For omaps with wake-up path, wakeirq will be irq from pinctrl and + * for other omaps, wakeirq will be from GPIO (dat line remuxed to + * gpio). wakeirq is needed to detect sdio irq in runtime suspend state + * with functional clock disabled. + */ + if (!host->dev->of_node || !host->wake_irq) + return -ENODEV; + + /* Prevent auto-enabling of IRQ */ + irq_set_status_flags(host->wake_irq, IRQ_NOAUTOEN); + ret = devm_request_irq(host->dev, host->wake_irq, omap_hsmmc_wake_irq, + IRQF_TRIGGER_LOW | IRQF_ONESHOT, + mmc_hostname(mmc), host); + if (ret) { + dev_err(mmc_dev(host->mmc), "Unable to request wake IRQ\n"); + goto err; + } + + /* + * Some omaps don't have wake-up path from deeper idle states + * and need to remux SDIO DAT1 to GPIO for wake-up from idle. + */ + if (host->pdata->controller_flags & OMAP_HSMMC_SWAKEUP_MISSING) { + struct pinctrl *p = devm_pinctrl_get(host->dev); + if (!p) { + ret = -ENODEV; + goto err_free_irq; + } + if (IS_ERR(pinctrl_lookup_state(p, PINCTRL_STATE_DEFAULT))) { + dev_info(host->dev, "missing default pinctrl state\n"); + devm_pinctrl_put(p); + ret = -EINVAL; + goto err_free_irq; + } + + if (IS_ERR(pinctrl_lookup_state(p, PINCTRL_STATE_IDLE))) { + dev_info(host->dev, "missing idle pinctrl state\n"); + devm_pinctrl_put(p); + ret = -EINVAL; + goto err_free_irq; + } + devm_pinctrl_put(p); + } + + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) | IWE); + return 0; + +err_free_irq: + devm_free_irq(host->dev, host->wake_irq, host); +err: + dev_warn(host->dev, "no SDIO IRQ support, falling back to polling\n"); + host->wake_irq = 0; + return ret; +} + static void omap_hsmmc_conf_bus_power(struct omap_hsmmc_host *host) { u32 hctl, capa, value; @@ -1691,7 +1839,7 @@ static const struct mmc_host_ops omap_hsmmc_ops = { .get_cd = omap_hsmmc_get_cd, .get_ro = omap_hsmmc_get_ro, .init_card = omap_hsmmc_init_card, - /* NYET -- enable_sdio_irq */ + .enable_sdio_irq = omap_hsmmc_enable_sdio_irq, }; #ifdef CONFIG_DEBUG_FS @@ -1701,13 +1849,23 @@ static int omap_hsmmc_regs_show(struct seq_file *s, void *data) struct mmc_host *mmc = s->private; struct omap_hsmmc_host *host = mmc_priv(mmc); - seq_printf(s, "mmc%d:\n ctx_loss:\t%d\n\nregs:\n", - mmc->index, host->context_loss); + seq_printf(s, "mmc%d:\n", mmc->index); + seq_printf(s, "sdio irq mode\t%s\n", + (mmc->caps & MMC_CAP_SDIO_IRQ) ? "interrupt" : "polling"); - pm_runtime_get_sync(host->dev); + if (mmc->caps & MMC_CAP_SDIO_IRQ) { + seq_printf(s, "sdio irq \t%s\n", + (host->flags & HSMMC_SDIO_IRQ_ENABLED) ? "enabled" + : "disabled"); + } + seq_printf(s, "ctx_loss:\t%d\n", host->context_loss); + pm_runtime_get_sync(host->dev); + seq_puts(s, "\nregs:\n"); seq_printf(s, "CON:\t\t0x%08x\n", OMAP_HSMMC_READ(host->base, CON)); + seq_printf(s, "PSTATE:\t\t0x%08x\n", + OMAP_HSMMC_READ(host->base, PSTATE)); seq_printf(s, "HCTL:\t\t0x%08x\n", OMAP_HSMMC_READ(host->base, HCTL)); seq_printf(s, "SYSCTL:\t\t0x%08x\n", @@ -1761,6 +1919,10 @@ static const struct omap_mmc_of_data omap3_pre_es3_mmc_of_data = { static const struct omap_mmc_of_data omap4_mmc_of_data = { .reg_offset = 0x100, }; +static const struct omap_mmc_of_data am33xx_mmc_of_data = { + .reg_offset = 0x100, + .controller_flags = OMAP_HSMMC_SWAKEUP_MISSING, +}; static const struct of_device_id omap_mmc_of_match[] = { { @@ -1777,6 +1939,10 @@ static const struct of_device_id omap_mmc_of_match[] = { .compatible = "ti,omap4-hsmmc", .data = &omap4_mmc_of_data, }, + { + .compatible = "ti,am33xx-hsmmc", + .data = &am33xx_mmc_of_data, + }, {}, }; MODULE_DEVICE_TABLE(of, omap_mmc_of_match); @@ -1850,7 +2016,6 @@ static int omap_hsmmc_probe(struct platform_device *pdev) const struct of_device_id *match; dma_cap_mask_t mask; unsigned tx_req, rx_req; - struct pinctrl *pinctrl; const struct omap_mmc_of_data *data; void __iomem *base; @@ -1913,6 +2078,9 @@ static int omap_hsmmc_probe(struct platform_device *pdev) platform_set_drvdata(pdev, host); + if (pdev->dev.of_node) + host->wake_irq = irq_of_parse_and_map(pdev->dev.of_node, 1); + mmc->ops = &omap_hsmmc_ops; mmc->f_min = OMAP_MMC_MIN_CLOCK; @@ -2061,10 +2229,17 @@ static int omap_hsmmc_probe(struct platform_device *pdev) omap_hsmmc_disable_irq(host); - pinctrl = devm_pinctrl_get_select_default(&pdev->dev); - if (IS_ERR(pinctrl)) - dev_warn(&pdev->dev, - "pins are not configured from the driver\n"); + /* + * For now, only support SDIO interrupt if we have a separate + * wake-up interrupt configured from device tree. This is because + * the wake-up interrupt is needed for idle state and some + * platforms need special quirks. And we don't want to add new + * legacy mux platform init code callbacks any longer as we + * are moving to DT based booting anyways. + */ + ret = omap_hsmmc_configure_wake_irq(host); + if (!ret) + mmc->caps |= MMC_CAP_SDIO_IRQ; omap_hsmmc_protect_card(host); @@ -2170,11 +2345,18 @@ static int omap_hsmmc_suspend(struct device *dev) pm_runtime_get_sync(host->dev); if (!(host->mmc->pm_flags & MMC_PM_KEEP_POWER)) { - omap_hsmmc_disable_irq(host); + OMAP_HSMMC_WRITE(host->base, ISE, 0); + OMAP_HSMMC_WRITE(host->base, IE, 0); + OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR); OMAP_HSMMC_WRITE(host->base, HCTL, OMAP_HSMMC_READ(host->base, HCTL) & ~SDBP); } + /* do not wake up due to sdio irq */ + if ((host->mmc->caps & MMC_CAP_SDIO_IRQ) && + !(host->mmc->pm_flags & MMC_PM_WAKE_SDIO_IRQ)) + disable_irq(host->wake_irq); + if (host->dbclk) clk_disable_unprepare(host->dbclk); @@ -2200,6 +2382,10 @@ static int omap_hsmmc_resume(struct device *dev) omap_hsmmc_protect_card(host); + if ((host->mmc->caps & MMC_CAP_SDIO_IRQ) && + !(host->mmc->pm_flags & MMC_PM_WAKE_SDIO_IRQ)) + enable_irq(host->wake_irq); + pm_runtime_mark_last_busy(host->dev); pm_runtime_put_autosuspend(host->dev); return 0; @@ -2215,22 +2401,77 @@ static int omap_hsmmc_resume(struct device *dev) static int omap_hsmmc_runtime_suspend(struct device *dev) { struct omap_hsmmc_host *host; + unsigned long flags; + int ret = 0; host = platform_get_drvdata(to_platform_device(dev)); omap_hsmmc_context_save(host); dev_dbg(dev, "disabled\n"); - return 0; + spin_lock_irqsave(&host->irq_lock, flags); + if ((host->mmc->caps & MMC_CAP_SDIO_IRQ) && + (host->flags & HSMMC_SDIO_IRQ_ENABLED)) { + /* disable sdio irq handling to prevent race */ + OMAP_HSMMC_WRITE(host->base, ISE, 0); + OMAP_HSMMC_WRITE(host->base, IE, 0); + + if (!(OMAP_HSMMC_READ(host->base, PSTATE) & DLEV_DAT(1))) { + /* + * dat1 line low, pending sdio irq + * race condition: possible irq handler running on + * multi-core, abort + */ + dev_dbg(dev, "pending sdio irq, abort suspend\n"); + OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR); + OMAP_HSMMC_WRITE(host->base, ISE, CIRQ_EN); + OMAP_HSMMC_WRITE(host->base, IE, CIRQ_EN); + pm_runtime_mark_last_busy(dev); + ret = -EBUSY; + goto abort; + } + + pinctrl_pm_select_idle_state(dev); + + WARN_ON(host->flags & HSMMC_WAKE_IRQ_ENABLED); + enable_irq(host->wake_irq); + host->flags |= HSMMC_WAKE_IRQ_ENABLED; + } else { + pinctrl_pm_select_idle_state(dev); + } + +abort: + spin_unlock_irqrestore(&host->irq_lock, flags); + return ret; } static int omap_hsmmc_runtime_resume(struct device *dev) { struct omap_hsmmc_host *host; + unsigned long flags; host = platform_get_drvdata(to_platform_device(dev)); omap_hsmmc_context_restore(host); dev_dbg(dev, "enabled\n"); + spin_lock_irqsave(&host->irq_lock, flags); + if ((host->mmc->caps & MMC_CAP_SDIO_IRQ) && + (host->flags & HSMMC_SDIO_IRQ_ENABLED)) { + /* sdio irq flag can't change while in runtime suspend */ + if (host->flags & HSMMC_WAKE_IRQ_ENABLED) { + disable_irq_nosync(host->wake_irq); + host->flags &= ~HSMMC_WAKE_IRQ_ENABLED; + } + + pinctrl_pm_select_default_state(host->dev); + + /* irq lost, if pinmux incorrect */ + OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR); + OMAP_HSMMC_WRITE(host->base, ISE, CIRQ_EN); + OMAP_HSMMC_WRITE(host->base, IE, CIRQ_EN); + } else { + pinctrl_pm_select_default_state(host->dev); + } + spin_unlock_irqrestore(&host->irq_lock, flags); return 0; } diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index f237826..e5516a2 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -12,6 +12,7 @@ */ #include <linux/module.h> +#include <linux/dmaengine.h> #include <linux/dma-mapping.h> #include <linux/clk.h> #include <linux/mmc/host.h> @@ -27,6 +28,7 @@ #include <mach/dma.h> #include <mach/gpio-samsung.h> +#include <linux/platform_data/dma-s3c24xx.h> #include <linux/platform_data/mmc-s3cmci.h> #include "s3cmci.h" @@ -140,10 +142,6 @@ static const int dbgmap_debug = dbg_err | dbg_debug; dev_dbg(&host->pdev->dev, args); \ } while (0) -static struct s3c2410_dma_client s3cmci_dma_client = { - .name = "s3c-mci", -}; - static void finalize_request(struct s3cmci_host *host); static void s3cmci_send_request(struct mmc_host *mmc); static void s3cmci_reset(struct s3cmci_host *host); @@ -256,25 +254,8 @@ static inline bool s3cmci_host_usedma(struct s3cmci_host *host) { #ifdef CONFIG_MMC_S3C_PIO return false; -#elif defined(CONFIG_MMC_S3C_DMA) +#else /* CONFIG_MMC_S3C_DMA */ return true; -#else - return host->dodma; -#endif -} - -/** - * s3cmci_host_canpio - return true if host has pio code available - * - * Return true if the driver has been compiled with the PIO support code - * available. - */ -static inline bool s3cmci_host_canpio(void) -{ -#ifdef CONFIG_MMC_S3C_PIO - return true; -#else - return false; #endif } @@ -841,60 +822,24 @@ static irqreturn_t s3cmci_irq_cd(int irq, void *dev_id) return IRQ_HANDLED; } -static void s3cmci_dma_done_callback(struct s3c2410_dma_chan *dma_ch, - void *buf_id, int size, - enum s3c2410_dma_buffresult result) +static void s3cmci_dma_done_callback(void *arg) { - struct s3cmci_host *host = buf_id; + struct s3cmci_host *host = arg; unsigned long iflags; - u32 mci_csta, mci_dsta, mci_fsta, mci_dcnt; - - mci_csta = readl(host->base + S3C2410_SDICMDSTAT); - mci_dsta = readl(host->base + S3C2410_SDIDSTA); - mci_fsta = readl(host->base + S3C2410_SDIFSTA); - mci_dcnt = readl(host->base + S3C2410_SDIDCNT); BUG_ON(!host->mrq); BUG_ON(!host->mrq->data); - BUG_ON(!host->dmatogo); spin_lock_irqsave(&host->complete_lock, iflags); - if (result != S3C2410_RES_OK) { - dbg(host, dbg_fail, "DMA FAILED: csta=0x%08x dsta=0x%08x " - "fsta=0x%08x dcnt:0x%08x result:0x%08x toGo:%u\n", - mci_csta, mci_dsta, mci_fsta, - mci_dcnt, result, host->dmatogo); - - goto fail_request; - } - - host->dmatogo--; - if (host->dmatogo) { - dbg(host, dbg_dma, "DMA DONE Size:%i DSTA:[%08x] " - "DCNT:[%08x] toGo:%u\n", - size, mci_dsta, mci_dcnt, host->dmatogo); - - goto out; - } - - dbg(host, dbg_dma, "DMA FINISHED Size:%i DSTA:%08x DCNT:%08x\n", - size, mci_dsta, mci_dcnt); + dbg(host, dbg_dma, "DMA FINISHED\n"); host->dma_complete = 1; host->complete_what = COMPLETION_FINALIZE; -out: tasklet_schedule(&host->pio_tasklet); spin_unlock_irqrestore(&host->complete_lock, iflags); - return; -fail_request: - host->mrq->data->error = -EINVAL; - host->complete_what = COMPLETION_FINALIZE; - clear_imask(host); - - goto out; } static void finalize_request(struct s3cmci_host *host) @@ -966,7 +911,7 @@ static void finalize_request(struct s3cmci_host *host) * DMA channel and the fifo to clear out any garbage. */ if (mrq->data->error != 0) { if (s3cmci_host_usedma(host)) - s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH); + dmaengine_terminate_all(host->dma); if (host->is2440) { /* Clear failure register and reset fifo. */ @@ -992,29 +937,6 @@ request_done: mmc_request_done(host->mmc, mrq); } -static void s3cmci_dma_setup(struct s3cmci_host *host, - enum dma_data_direction source) -{ - static enum dma_data_direction last_source = -1; - static int setup_ok; - - if (last_source == source) - return; - - last_source = source; - - s3c2410_dma_devconfig(host->dma, source, - host->mem->start + host->sdidata); - - if (!setup_ok) { - s3c2410_dma_config(host->dma, 4); - s3c2410_dma_set_buffdone_fn(host->dma, - s3cmci_dma_done_callback); - s3c2410_dma_setflags(host->dma, S3C2410_DMAF_AUTOSTART); - setup_ok = 1; - } -} - static void s3cmci_send_command(struct s3cmci_host *host, struct mmc_command *cmd) { @@ -1162,43 +1084,45 @@ static int s3cmci_prepare_pio(struct s3cmci_host *host, struct mmc_data *data) static int s3cmci_prepare_dma(struct s3cmci_host *host, struct mmc_data *data) { - int dma_len, i; int rw = data->flags & MMC_DATA_WRITE; + struct dma_async_tx_descriptor *desc; + struct dma_slave_config conf = { + .src_addr = host->mem->start + host->sdidata, + .dst_addr = host->mem->start + host->sdidata, + .src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, + .dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES, + }; BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR); - s3cmci_dma_setup(host, rw ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH); - - dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, - rw ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - - if (dma_len == 0) - return -ENOMEM; - - host->dma_complete = 0; - host->dmatogo = dma_len; - - for (i = 0; i < dma_len; i++) { - int res; - - dbg(host, dbg_dma, "enqueue %i: %08x@%u\n", i, - sg_dma_address(&data->sg[i]), - sg_dma_len(&data->sg[i])); + /* Restore prescaler value */ + writel(host->prescaler, host->base + S3C2410_SDIPRE); - res = s3c2410_dma_enqueue(host->dma, host, - sg_dma_address(&data->sg[i]), - sg_dma_len(&data->sg[i])); + if (!rw) + conf.direction = DMA_DEV_TO_MEM; + else + conf.direction = DMA_MEM_TO_DEV; - if (res) { - s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH); - return -EBUSY; - } - } + dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, + rw ? DMA_TO_DEVICE : DMA_FROM_DEVICE); - s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_START); + dmaengine_slave_config(host->dma, &conf); + desc = dmaengine_prep_slave_sg(host->dma, data->sg, data->sg_len, + conf.direction, + DMA_CTRL_ACK | DMA_PREP_INTERRUPT); + if (!desc) + goto unmap_exit; + desc->callback = s3cmci_dma_done_callback; + desc->callback_param = host; + dmaengine_submit(desc); + dma_async_issue_pending(host->dma); return 0; + +unmap_exit: + dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len, + rw ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + return -ENOMEM; } static void s3cmci_send_request(struct mmc_host *mmc) @@ -1676,10 +1600,6 @@ static int s3cmci_probe(struct platform_device *pdev) host->complete_what = COMPLETION_NONE; host->pio_active = XFER_NONE; -#ifdef CONFIG_MMC_S3C_PIODMA - host->dodma = host->pdata->use_dma; -#endif - host->mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!host->mem) { dev_err(&pdev->dev, @@ -1765,17 +1685,17 @@ static int s3cmci_probe(struct platform_device *pdev) /* depending on the dma state, get a dma channel to use. */ if (s3cmci_host_usedma(host)) { - host->dma = s3c2410_dma_request(DMACH_SDI, &s3cmci_dma_client, - host); - if (host->dma < 0) { + dma_cap_mask_t mask; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + + host->dma = dma_request_slave_channel_compat(mask, + s3c24xx_dma_filter, (void *)DMACH_SDI, &pdev->dev, "rx-tx"); + if (!host->dma) { dev_err(&pdev->dev, "cannot get DMA channel.\n"); - if (!s3cmci_host_canpio()) { - ret = -EBUSY; - goto probe_free_gpio_wp; - } else { - dev_warn(&pdev->dev, "falling back to PIO.\n"); - host->dodma = 0; - } + ret = -EBUSY; + goto probe_free_gpio_wp; } } @@ -1787,7 +1707,7 @@ static int s3cmci_probe(struct platform_device *pdev) goto probe_free_dma; } - ret = clk_enable(host->clk); + ret = clk_prepare_enable(host->clk); if (ret) { dev_err(&pdev->dev, "failed to enable clock source.\n"); goto clk_free; @@ -1816,7 +1736,7 @@ static int s3cmci_probe(struct platform_device *pdev) mmc->max_segs = 128; dbg(host, dbg_debug, - "probe: mode:%s mapped mci_base:%p irq:%u irq_cd:%u dma:%u.\n", + "probe: mode:%s mapped mci_base:%p irq:%u irq_cd:%u dma:%p.\n", (host->is2440?"2440":""), host->base, host->irq, host->irq_cd, host->dma); @@ -1845,14 +1765,14 @@ static int s3cmci_probe(struct platform_device *pdev) s3cmci_cpufreq_deregister(host); free_dmabuf: - clk_disable(host->clk); + clk_disable_unprepare(host->clk); clk_free: clk_put(host->clk); probe_free_dma: if (s3cmci_host_usedma(host)) - s3c2410_dma_free(host->dma, &s3cmci_dma_client); + dma_release_channel(host->dma); probe_free_gpio_wp: if (!host->pdata->no_wprotect) @@ -1897,7 +1817,7 @@ static void s3cmci_shutdown(struct platform_device *pdev) s3cmci_debugfs_remove(host); s3cmci_cpufreq_deregister(host); mmc_remove_host(mmc); - clk_disable(host->clk); + clk_disable_unprepare(host->clk); } static int s3cmci_remove(struct platform_device *pdev) @@ -1914,7 +1834,7 @@ static int s3cmci_remove(struct platform_device *pdev) tasklet_disable(&host->pio_tasklet); if (s3cmci_host_usedma(host)) - s3c2410_dma_free(host->dma, &s3cmci_dma_client); + dma_release_channel(host->dma); free_irq(host->irq, host); diff --git a/drivers/mmc/host/s3cmci.h b/drivers/mmc/host/s3cmci.h index c76b53d..cc2e46c 100644 --- a/drivers/mmc/host/s3cmci.h +++ b/drivers/mmc/host/s3cmci.h @@ -26,7 +26,7 @@ struct s3cmci_host { void __iomem *base; int irq; int irq_cd; - int dma; + struct dma_chan *dma; unsigned long clk_rate; unsigned long clk_div; @@ -36,8 +36,6 @@ struct s3cmci_host { int is2440; unsigned sdiimsk; unsigned sdidata; - int dodma; - int dmatogo; bool irq_disabled; bool irq_enabled; diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c index 8ce3c28..8c53370 100644 --- a/drivers/mmc/host/sdhci-acpi.c +++ b/drivers/mmc/host/sdhci-acpi.c @@ -124,9 +124,11 @@ static const struct sdhci_acpi_chip sdhci_acpi_chip_int = { static const struct sdhci_acpi_slot sdhci_acpi_slot_int_emmc = { .chip = &sdhci_acpi_chip_int, - .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE | MMC_CAP_HW_RESET, + .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE | + MMC_CAP_HW_RESET | MMC_CAP_1_8V_DDR, .caps2 = MMC_CAP2_HC_ERASE_SZ, .flags = SDHCI_ACPI_RUNTIME_PM, + .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN, }; static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sdio = { diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c index 40573a5..1a6661e 100644 --- a/drivers/mmc/host/sdhci-msm.c +++ b/drivers/mmc/host/sdhci-msm.c @@ -16,7 +16,6 @@ #include <linux/module.h> #include <linux/of_device.h> -#include <linux/regulator/consumer.h> #include <linux/delay.h> #include <linux/mmc/mmc.h> #include <linux/slab.h> diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index 52c42fc..c3a1deb 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -103,6 +103,10 @@ static const struct sdhci_pci_fixes sdhci_cafe = { SDHCI_QUIRK_BROKEN_TIMEOUT_VAL, }; +static const struct sdhci_pci_fixes sdhci_intel_qrk = { + .quirks = SDHCI_QUIRK_NO_HISPD_BIT, +}; + static int mrst_hc_probe_slot(struct sdhci_pci_slot *slot) { slot->host->mmc->caps |= MMC_CAP_8_BIT_DATA; @@ -264,7 +268,7 @@ static void sdhci_pci_int_hw_reset(struct sdhci_host *host) static int byt_emmc_probe_slot(struct sdhci_pci_slot *slot) { slot->host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE | - MMC_CAP_HW_RESET; + MMC_CAP_HW_RESET | MMC_CAP_1_8V_DDR; slot->host->mmc->caps2 |= MMC_CAP2_HC_ERASE_SZ; slot->hw_reset = sdhci_pci_int_hw_reset; return 0; @@ -279,6 +283,7 @@ static int byt_sdio_probe_slot(struct sdhci_pci_slot *slot) static const struct sdhci_pci_fixes sdhci_intel_byt_emmc = { .allow_runtime_pm = true, .probe_slot = byt_emmc_probe_slot, + .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN, }; static const struct sdhci_pci_fixes sdhci_intel_byt_sdio = { @@ -753,6 +758,14 @@ static const struct pci_device_id pci_ids[] = { { .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_QRK_SD, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = (kernel_ulong_t)&sdhci_intel_qrk, + }, + + { + .vendor = PCI_VENDOR_ID_INTEL, .device = PCI_DEVICE_ID_INTEL_MRST_SD0, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, @@ -1130,18 +1143,13 @@ static int sdhci_pci_suspend(struct device *dev) goto err_pci_suspend; } - pci_save_state(pdev); if (pm_flags & MMC_PM_KEEP_POWER) { - if (pm_flags & MMC_PM_WAKE_SDIO_IRQ) { - pci_pme_active(pdev, true); - pci_enable_wake(pdev, PCI_D3hot, 1); - } - pci_set_power_state(pdev, PCI_D3hot); - } else { - pci_enable_wake(pdev, PCI_D3hot, 0); - pci_disable_device(pdev); - pci_set_power_state(pdev, PCI_D3hot); - } + if (pm_flags & MMC_PM_WAKE_SDIO_IRQ) + device_init_wakeup(dev, true); + else + device_init_wakeup(dev, false); + } else + device_init_wakeup(dev, false); return 0; @@ -1162,12 +1170,6 @@ static int sdhci_pci_resume(struct device *dev) if (!chip) return 0; - pci_set_power_state(pdev, PCI_D0); - pci_restore_state(pdev); - ret = pci_enable_device(pdev); - if (ret) - return ret; - if (chip->fixes && chip->fixes->resume) { ret = chip->fixes->resume(chip); if (ret) diff --git a/drivers/mmc/host/sdhci-pci.h b/drivers/mmc/host/sdhci-pci.h index 6d71871..c101477 100644 --- a/drivers/mmc/host/sdhci-pci.h +++ b/drivers/mmc/host/sdhci-pci.h @@ -17,6 +17,7 @@ #define PCI_DEVICE_ID_INTEL_CLV_SDIO2 0x08fb #define PCI_DEVICE_ID_INTEL_CLV_EMMC0 0x08e5 #define PCI_DEVICE_ID_INTEL_CLV_EMMC1 0x08e6 +#define PCI_DEVICE_ID_INTEL_QRK_SD 0x08A7 /* * PCI registers diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c index f4f1289..6f842fb 100644 --- a/drivers/mmc/host/sdhci-pxav3.c +++ b/drivers/mmc/host/sdhci-pxav3.c @@ -288,15 +288,13 @@ static int sdhci_pxav3_probe(struct platform_device *pdev) int ret; struct clk *clk; - pxa = kzalloc(sizeof(struct sdhci_pxa), GFP_KERNEL); + pxa = devm_kzalloc(&pdev->dev, sizeof(struct sdhci_pxa), GFP_KERNEL); if (!pxa) return -ENOMEM; host = sdhci_pltfm_init(pdev, &sdhci_pxav3_pdata, 0); - if (IS_ERR(host)) { - kfree(pxa); + if (IS_ERR(host)) return PTR_ERR(host); - } if (of_device_is_compatible(np, "marvell,armada-380-sdhci")) { ret = mv_conf_mbus_windows(pdev, mv_mbus_dram_info()); @@ -308,7 +306,7 @@ static int sdhci_pxav3_probe(struct platform_device *pdev) pltfm_host = sdhci_priv(host); pltfm_host->priv = pxa; - clk = clk_get(dev, NULL); + clk = devm_clk_get(dev, NULL); if (IS_ERR(clk)) { dev_err(dev, "failed to get io clock\n"); ret = PTR_ERR(clk); @@ -389,11 +387,9 @@ err_add_host: pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); clk_disable_unprepare(clk); - clk_put(clk); err_clk_get: err_mbus_win: sdhci_pltfm_free(pdev); - kfree(pxa); return ret; } @@ -401,17 +397,14 @@ static int sdhci_pxav3_remove(struct platform_device *pdev) { struct sdhci_host *host = platform_get_drvdata(pdev); struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); - struct sdhci_pxa *pxa = pltfm_host->priv; pm_runtime_get_sync(&pdev->dev); sdhci_remove_host(host, 1); pm_runtime_disable(&pdev->dev); clk_disable_unprepare(pltfm_host->clk); - clk_put(pltfm_host->clk); sdhci_pltfm_free(pdev); - kfree(pxa); return 0; } diff --git a/drivers/mmc/host/sdhci-st.c b/drivers/mmc/host/sdhci-st.c new file mode 100644 index 0000000..328f348 --- /dev/null +++ b/drivers/mmc/host/sdhci-st.c @@ -0,0 +1,176 @@ +/* + * Support for SDHCI on STMicroelectronics SoCs + * + * Copyright (C) 2014 STMicroelectronics Ltd + * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> + * Contributors: Peter Griffin <peter.griffin@linaro.org> + * + * Based on sdhci-cns3xxx.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/io.h> +#include <linux/of.h> +#include <linux/module.h> +#include <linux/err.h> +#include <linux/mmc/host.h> + +#include "sdhci-pltfm.h" + +static u32 sdhci_st_readl(struct sdhci_host *host, int reg) +{ + u32 ret; + + switch (reg) { + case SDHCI_CAPABILITIES: + ret = readl_relaxed(host->ioaddr + reg); + /* Support 3.3V and 1.8V */ + ret &= ~SDHCI_CAN_VDD_300; + break; + default: + ret = readl_relaxed(host->ioaddr + reg); + } + return ret; +} + +static const struct sdhci_ops sdhci_st_ops = { + .get_max_clock = sdhci_pltfm_clk_get_max_clock, + .set_clock = sdhci_set_clock, + .set_bus_width = sdhci_set_bus_width, + .read_l = sdhci_st_readl, + .reset = sdhci_reset, +}; + +static const struct sdhci_pltfm_data sdhci_st_pdata = { + .ops = &sdhci_st_ops, + .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC | + SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN, +}; + + +static int sdhci_st_probe(struct platform_device *pdev) +{ + struct sdhci_host *host; + struct sdhci_pltfm_host *pltfm_host; + struct clk *clk; + int ret = 0; + u16 host_version; + + clk = devm_clk_get(&pdev->dev, "mmc"); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "Peripheral clk not found\n"); + return PTR_ERR(clk); + } + + host = sdhci_pltfm_init(pdev, &sdhci_st_pdata, 0); + if (IS_ERR(host)) { + dev_err(&pdev->dev, "Failed sdhci_pltfm_init\n"); + return PTR_ERR(host); + } + + ret = mmc_of_parse(host->mmc); + + if (ret) { + dev_err(&pdev->dev, "Failed mmc_of_parse\n"); + return ret; + } + + clk_prepare_enable(clk); + + pltfm_host = sdhci_priv(host); + pltfm_host->clk = clk; + + ret = sdhci_add_host(host); + if (ret) { + dev_err(&pdev->dev, "Failed sdhci_add_host\n"); + goto err_out; + } + + platform_set_drvdata(pdev, host); + + host_version = readw_relaxed((host->ioaddr + SDHCI_HOST_VERSION)); + + dev_info(&pdev->dev, "SDHCI ST Initialised: Host Version: 0x%x Vendor Version 0x%x\n", + ((host_version & SDHCI_SPEC_VER_MASK) >> SDHCI_SPEC_VER_SHIFT), + ((host_version & SDHCI_VENDOR_VER_MASK) >> + SDHCI_VENDOR_VER_SHIFT)); + + return 0; + +err_out: + clk_disable_unprepare(clk); + sdhci_pltfm_free(pdev); + + return ret; +} + +static int sdhci_st_remove(struct platform_device *pdev) +{ + struct sdhci_host *host = platform_get_drvdata(pdev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + + clk_disable_unprepare(pltfm_host->clk); + + return sdhci_pltfm_unregister(pdev); +} + +#ifdef CONFIG_PM_SLEEP +static int sdhci_st_suspend(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + int ret = sdhci_suspend_host(host); + + if (ret) + goto out; + + clk_disable_unprepare(pltfm_host->clk); +out: + return ret; +} + +static int sdhci_st_resume(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + + clk_prepare_enable(pltfm_host->clk); + + return sdhci_resume_host(host); +} +#endif + +static SIMPLE_DEV_PM_OPS(sdhci_st_pmops, sdhci_st_suspend, sdhci_st_resume); + +static const struct of_device_id st_sdhci_match[] = { + { .compatible = "st,sdhci" }, + {}, +}; + +MODULE_DEVICE_TABLE(of, st_sdhci_match); + +static struct platform_driver sdhci_st_driver = { + .probe = sdhci_st_probe, + .remove = sdhci_st_remove, + .driver = { + .name = "sdhci-st", + .pm = &sdhci_st_pmops, + .of_match_table = of_match_ptr(st_sdhci_match), + }, +}; + +module_platform_driver(sdhci_st_driver); + +MODULE_DESCRIPTION("SDHCI driver for STMicroelectronics SoCs"); +MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:st-sdhci"); diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c index d93a063..33100d1 100644 --- a/drivers/mmc/host/sdhci-tegra.c +++ b/drivers/mmc/host/sdhci-tegra.c @@ -26,8 +26,6 @@ #include <linux/mmc/host.h> #include <linux/mmc/slot-gpio.h> -#include <asm/gpio.h> - #include "sdhci-pltfm.h" /* Tegra SDHOST controller vendor register definitions */ diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 47055f3..37b2a9a 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1223,8 +1223,16 @@ EXPORT_SYMBOL_GPL(sdhci_set_clock); static void sdhci_set_power(struct sdhci_host *host, unsigned char mode, unsigned short vdd) { + struct mmc_host *mmc = host->mmc; u8 pwr = 0; + if (!IS_ERR(mmc->supply.vmmc)) { + spin_unlock_irq(&host->lock); + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd); + spin_lock_irq(&host->lock); + return; + } + if (mode != MMC_POWER_OFF) { switch (1 << vdd) { case MMC_VDD_165_195: @@ -1283,12 +1291,6 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned char mode, if (host->quirks & SDHCI_QUIRK_DELAY_AFTER_POWER) mdelay(10); } - - if (host->vmmc) { - spin_unlock_irq(&host->lock); - mmc_regulator_set_ocr(host->mmc, host->vmmc, vdd); - spin_lock_irq(&host->lock); - } } /*****************************************************************************\ @@ -1440,13 +1442,15 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios) { unsigned long flags; u8 ctrl; + struct mmc_host *mmc = host->mmc; spin_lock_irqsave(&host->lock, flags); if (host->flags & SDHCI_DEVICE_DEAD) { spin_unlock_irqrestore(&host->lock, flags); - if (host->vmmc && ios->power_mode == MMC_POWER_OFF) - mmc_regulator_set_ocr(host->mmc, host->vmmc, 0); + if (!IS_ERR(mmc->supply.vmmc) && + ios->power_mode == MMC_POWER_OFF) + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0); return; } @@ -1530,7 +1534,6 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios) host->ops->set_clock(host, host->clock); } - /* Reset SD Clock Enable */ clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL); clk &= ~SDHCI_CLOCK_CARD_EN; @@ -1707,6 +1710,7 @@ static void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable) static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host, struct mmc_ios *ios) { + struct mmc_host *mmc = host->mmc; u16 ctrl; int ret; @@ -1725,11 +1729,12 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host, ctrl &= ~SDHCI_CTRL_VDD_180; sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); - if (host->vqmmc) { - ret = regulator_set_voltage(host->vqmmc, 2700000, 3600000); + if (!IS_ERR(mmc->supply.vqmmc)) { + ret = regulator_set_voltage(mmc->supply.vqmmc, 2700000, + 3600000); if (ret) { pr_warning("%s: Switching to 3.3V signalling voltage " - " failed\n", mmc_hostname(host->mmc)); + " failed\n", mmc_hostname(mmc)); return -EIO; } } @@ -1742,16 +1747,16 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host, return 0; pr_warning("%s: 3.3V regulator output did not became stable\n", - mmc_hostname(host->mmc)); + mmc_hostname(mmc)); return -EAGAIN; case MMC_SIGNAL_VOLTAGE_180: - if (host->vqmmc) { - ret = regulator_set_voltage(host->vqmmc, + if (!IS_ERR(mmc->supply.vqmmc)) { + ret = regulator_set_voltage(mmc->supply.vqmmc, 1700000, 1950000); if (ret) { pr_warning("%s: Switching to 1.8V signalling voltage " - " failed\n", mmc_hostname(host->mmc)); + " failed\n", mmc_hostname(mmc)); return -EIO; } } @@ -1763,24 +1768,22 @@ static int sdhci_do_start_signal_voltage_switch(struct sdhci_host *host, ctrl |= SDHCI_CTRL_VDD_180; sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); - /* Wait for 5ms */ - usleep_range(5000, 5500); - /* 1.8V regulator output should be stable within 5 ms */ ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); if (ctrl & SDHCI_CTRL_VDD_180) return 0; pr_warning("%s: 1.8V regulator output did not became stable\n", - mmc_hostname(host->mmc)); + mmc_hostname(mmc)); return -EAGAIN; case MMC_SIGNAL_VOLTAGE_120: - if (host->vqmmc) { - ret = regulator_set_voltage(host->vqmmc, 1100000, 1300000); + if (!IS_ERR(mmc->supply.vqmmc)) { + ret = regulator_set_voltage(mmc->supply.vqmmc, 1100000, + 1300000); if (ret) { pr_warning("%s: Switching to 1.2V signalling voltage " - " failed\n", mmc_hostname(host->mmc)); + " failed\n", mmc_hostname(mmc)); return -EIO; } } @@ -2643,7 +2646,6 @@ static void sdhci_runtime_pm_bus_off(struct sdhci_host *host) int sdhci_runtime_suspend_host(struct sdhci_host *host) { unsigned long flags; - int ret = 0; /* Disable tuning since we are suspending */ if (host->flags & SDHCI_USING_RETUNING_TIMER) { @@ -2663,14 +2665,14 @@ int sdhci_runtime_suspend_host(struct sdhci_host *host) host->runtime_suspended = true; spin_unlock_irqrestore(&host->lock, flags); - return ret; + return 0; } EXPORT_SYMBOL_GPL(sdhci_runtime_suspend_host); int sdhci_runtime_resume_host(struct sdhci_host *host) { unsigned long flags; - int ret = 0, host_flags = host->flags; + int host_flags = host->flags; if (host_flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) { if (host->ops->enable_dma) @@ -2709,7 +2711,7 @@ int sdhci_runtime_resume_host(struct sdhci_host *host) spin_unlock_irqrestore(&host->lock, flags); - return ret; + return 0; } EXPORT_SYMBOL_GPL(sdhci_runtime_resume_host); @@ -2820,12 +2822,12 @@ int sdhci_add_host(struct sdhci_host *host) * (128) and potentially one alignment transfer for * each of those entries. */ - host->adma_desc = dma_alloc_coherent(mmc_dev(host->mmc), + host->adma_desc = dma_alloc_coherent(mmc_dev(mmc), ADMA_SIZE, &host->adma_addr, GFP_KERNEL); host->align_buffer = kmalloc(128 * 4, GFP_KERNEL); if (!host->adma_desc || !host->align_buffer) { - dma_free_coherent(mmc_dev(host->mmc), ADMA_SIZE, + dma_free_coherent(mmc_dev(mmc), ADMA_SIZE, host->adma_desc, host->adma_addr); kfree(host->align_buffer); pr_warning("%s: Unable to allocate ADMA " @@ -2838,7 +2840,7 @@ int sdhci_add_host(struct sdhci_host *host) pr_warning("%s: unable to allocate aligned ADMA descriptor\n", mmc_hostname(mmc)); host->flags &= ~SDHCI_USE_ADMA; - dma_free_coherent(mmc_dev(host->mmc), ADMA_SIZE, + dma_free_coherent(mmc_dev(mmc), ADMA_SIZE, host->adma_desc, host->adma_addr); kfree(host->align_buffer); host->adma_desc = NULL; @@ -2853,7 +2855,7 @@ int sdhci_add_host(struct sdhci_host *host) */ if (!(host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA))) { host->dma_mask = DMA_BIT_MASK(64); - mmc_dev(host->mmc)->dma_mask = &host->dma_mask; + mmc_dev(mmc)->dma_mask = &host->dma_mask; } if (host->version >= SDHCI_SPEC_300) @@ -2959,28 +2961,25 @@ int sdhci_add_host(struct sdhci_host *host) mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED; if ((host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION) && - !(host->mmc->caps & MMC_CAP_NONREMOVABLE)) + !(mmc->caps & MMC_CAP_NONREMOVABLE)) mmc->caps |= MMC_CAP_NEEDS_POLL; + /* If there are external regulators, get them */ + if (mmc_regulator_get_supply(mmc) == -EPROBE_DEFER) + return -EPROBE_DEFER; + /* If vqmmc regulator and no 1.8V signalling, then there's no UHS */ - host->vqmmc = regulator_get_optional(mmc_dev(mmc), "vqmmc"); - if (IS_ERR_OR_NULL(host->vqmmc)) { - if (PTR_ERR(host->vqmmc) < 0) { - pr_info("%s: no vqmmc regulator found\n", - mmc_hostname(mmc)); - host->vqmmc = NULL; - } - } else { - ret = regulator_enable(host->vqmmc); - if (!regulator_is_supported_voltage(host->vqmmc, 1700000, - 1950000)) + if (!IS_ERR(mmc->supply.vqmmc)) { + ret = regulator_enable(mmc->supply.vqmmc); + if (!regulator_is_supported_voltage(mmc->supply.vqmmc, 1700000, + 1950000)) caps[1] &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_DDR50); if (ret) { pr_warn("%s: Failed to enable vqmmc regulator: %d\n", mmc_hostname(mmc), ret); - host->vqmmc = NULL; + mmc->supply.vqmmc = NULL; } } @@ -3041,34 +3040,6 @@ int sdhci_add_host(struct sdhci_host *host) ocr_avail = 0; - host->vmmc = regulator_get_optional(mmc_dev(mmc), "vmmc"); - if (IS_ERR_OR_NULL(host->vmmc)) { - if (PTR_ERR(host->vmmc) < 0) { - pr_info("%s: no vmmc regulator found\n", - mmc_hostname(mmc)); - host->vmmc = NULL; - } - } - -#ifdef CONFIG_REGULATOR - /* - * Voltage range check makes sense only if regulator reports - * any voltage value. - */ - if (host->vmmc && regulator_get_voltage(host->vmmc) > 0) { - ret = regulator_is_supported_voltage(host->vmmc, 2700000, - 3600000); - if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_330))) - caps[0] &= ~SDHCI_CAN_VDD_330; - if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_300))) - caps[0] &= ~SDHCI_CAN_VDD_300; - ret = regulator_is_supported_voltage(host->vmmc, 1700000, - 1950000); - if ((ret <= 0) || (!(caps[0] & SDHCI_CAN_VDD_180))) - caps[0] &= ~SDHCI_CAN_VDD_180; - } -#endif /* CONFIG_REGULATOR */ - /* * According to SD Host Controller spec v3.00, if the Host System * can afford more than 150mA, Host Driver should set XPC to 1. Also @@ -3077,8 +3048,8 @@ int sdhci_add_host(struct sdhci_host *host) * value. */ max_current_caps = sdhci_readl(host, SDHCI_MAX_CURRENT); - if (!max_current_caps && host->vmmc) { - u32 curr = regulator_get_current_limit(host->vmmc); + if (!max_current_caps && !IS_ERR(mmc->supply.vmmc)) { + u32 curr = regulator_get_current_limit(mmc->supply.vmmc); if (curr > 0) { /* convert to SDHCI_MAX_CURRENT format */ @@ -3118,8 +3089,12 @@ int sdhci_add_host(struct sdhci_host *host) SDHCI_MAX_CURRENT_MULTIPLIER; } + /* If OCR set by external regulators, use it instead */ + if (mmc->ocr_avail) + ocr_avail = mmc->ocr_avail; + if (host->ocr_mask) - ocr_avail = host->ocr_mask; + ocr_avail &= host->ocr_mask; mmc->ocr_avail = ocr_avail; mmc->ocr_avail_sdio = ocr_avail; @@ -3273,6 +3248,7 @@ EXPORT_SYMBOL_GPL(sdhci_add_host); void sdhci_remove_host(struct sdhci_host *host, int dead) { + struct mmc_host *mmc = host->mmc; unsigned long flags; if (dead) { @@ -3282,7 +3258,7 @@ void sdhci_remove_host(struct sdhci_host *host, int dead) if (host->mrq) { pr_err("%s: Controller removed during " - " transfer!\n", mmc_hostname(host->mmc)); + " transfer!\n", mmc_hostname(mmc)); host->mrq->cmd->error = -ENOMEDIUM; tasklet_schedule(&host->finish_tasklet); @@ -3293,7 +3269,7 @@ void sdhci_remove_host(struct sdhci_host *host, int dead) sdhci_disable_card_detection(host); - mmc_remove_host(host->mmc); + mmc_remove_host(mmc); #ifdef SDHCI_USE_LEDS_CLASS led_classdev_unregister(&host->led); @@ -3310,18 +3286,14 @@ void sdhci_remove_host(struct sdhci_host *host, int dead) tasklet_kill(&host->finish_tasklet); - if (host->vmmc) { - regulator_disable(host->vmmc); - regulator_put(host->vmmc); - } + if (!IS_ERR(mmc->supply.vmmc)) + regulator_disable(mmc->supply.vmmc); - if (host->vqmmc) { - regulator_disable(host->vqmmc); - regulator_put(host->vqmmc); - } + if (!IS_ERR(mmc->supply.vqmmc)) + regulator_disable(mmc->supply.vqmmc); if (host->adma_desc) - dma_free_coherent(mmc_dev(host->mmc), ADMA_SIZE, + dma_free_coherent(mmc_dev(mmc), ADMA_SIZE, host->adma_desc, host->adma_addr); kfree(host->align_buffer); diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c index 656fbba..d11708c 100644 --- a/drivers/mmc/host/sh_mmcif.c +++ b/drivers/mmc/host/sh_mmcif.c @@ -386,7 +386,7 @@ sh_mmcif_request_dma_one(struct sh_mmcif_host *host, struct sh_mmcif_plat_data *pdata, enum dma_transfer_direction direction) { - struct dma_slave_config cfg; + struct dma_slave_config cfg = { 0, }; struct dma_chan *chan; unsigned int slave_id; struct resource *res; @@ -417,8 +417,15 @@ sh_mmcif_request_dma_one(struct sh_mmcif_host *host, /* In the OF case the driver will get the slave ID from the DT */ cfg.slave_id = slave_id; cfg.direction = direction; - cfg.dst_addr = res->start + MMCIF_CE_DATA; - cfg.src_addr = 0; + + if (direction == DMA_DEV_TO_MEM) { + cfg.src_addr = res->start + MMCIF_CE_DATA; + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + } else { + cfg.dst_addr = res->start + MMCIF_CE_DATA; + cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + } + ret = dmaengine_slave_config(chan, &cfg); if (ret < 0) { dma_release_channel(chan); @@ -1378,26 +1385,19 @@ static int sh_mmcif_probe(struct platform_device *pdev) dev_err(&pdev->dev, "Get irq error\n"); return -ENXIO; } + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "platform_get_resource error.\n"); - return -ENXIO; - } - reg = ioremap(res->start, resource_size(res)); - if (!reg) { - dev_err(&pdev->dev, "ioremap error.\n"); - return -ENOMEM; - } + reg = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(reg)) + return PTR_ERR(reg); mmc = mmc_alloc_host(sizeof(struct sh_mmcif_host), &pdev->dev); - if (!mmc) { - ret = -ENOMEM; - goto ealloch; - } + if (!mmc) + return -ENOMEM; ret = mmc_of_parse(mmc); if (ret < 0) - goto eofparse; + goto err_host; host = mmc_priv(mmc); host->mmc = mmc; @@ -1427,19 +1427,19 @@ static int sh_mmcif_probe(struct platform_device *pdev) pm_runtime_enable(&pdev->dev); host->power = false; - host->hclk = clk_get(&pdev->dev, NULL); + host->hclk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(host->hclk)) { ret = PTR_ERR(host->hclk); dev_err(&pdev->dev, "cannot get clock: %d\n", ret); - goto eclkget; + goto err_pm; } ret = sh_mmcif_clk_update(host); if (ret < 0) - goto eclkupdate; + goto err_pm; ret = pm_runtime_resume(&pdev->dev); if (ret < 0) - goto eresume; + goto err_clk; INIT_DELAYED_WORK(&host->timeout_work, mmcif_timeout_work); @@ -1447,65 +1447,55 @@ static int sh_mmcif_probe(struct platform_device *pdev) sh_mmcif_writel(host->addr, MMCIF_CE_INT_MASK, MASK_ALL); name = irq[1] < 0 ? dev_name(&pdev->dev) : "sh_mmc:error"; - ret = request_threaded_irq(irq[0], sh_mmcif_intr, sh_mmcif_irqt, 0, name, host); + ret = devm_request_threaded_irq(&pdev->dev, irq[0], sh_mmcif_intr, + sh_mmcif_irqt, 0, name, host); if (ret) { dev_err(&pdev->dev, "request_irq error (%s)\n", name); - goto ereqirq0; + goto err_clk; } if (irq[1] >= 0) { - ret = request_threaded_irq(irq[1], sh_mmcif_intr, sh_mmcif_irqt, - 0, "sh_mmc:int", host); + ret = devm_request_threaded_irq(&pdev->dev, irq[1], + sh_mmcif_intr, sh_mmcif_irqt, + 0, "sh_mmc:int", host); if (ret) { dev_err(&pdev->dev, "request_irq error (sh_mmc:int)\n"); - goto ereqirq1; + goto err_clk; } } if (pd && pd->use_cd_gpio) { ret = mmc_gpio_request_cd(mmc, pd->cd_gpio, 0); if (ret < 0) - goto erqcd; + goto err_clk; } mutex_init(&host->thread_lock); - clk_disable_unprepare(host->hclk); ret = mmc_add_host(mmc); if (ret < 0) - goto emmcaddh; + goto err_clk; dev_pm_qos_expose_latency_limit(&pdev->dev, 100); - dev_info(&pdev->dev, "driver version %s\n", DRIVER_VERSION); - dev_dbg(&pdev->dev, "chip ver H'%04x\n", - sh_mmcif_readl(host->addr, MMCIF_CE_VERSION) & 0x0000ffff); + dev_info(&pdev->dev, "Chip version 0x%04x, clock rate %luMHz\n", + sh_mmcif_readl(host->addr, MMCIF_CE_VERSION) & 0xffff, + clk_get_rate(host->hclk) / 1000000UL); + + clk_disable_unprepare(host->hclk); return ret; -emmcaddh: -erqcd: - if (irq[1] >= 0) - free_irq(irq[1], host); -ereqirq1: - free_irq(irq[0], host); -ereqirq0: - pm_runtime_suspend(&pdev->dev); -eresume: +err_clk: clk_disable_unprepare(host->hclk); -eclkupdate: - clk_put(host->hclk); -eclkget: +err_pm: pm_runtime_disable(&pdev->dev); -eofparse: +err_host: mmc_free_host(mmc); -ealloch: - iounmap(reg); return ret; } static int sh_mmcif_remove(struct platform_device *pdev) { struct sh_mmcif_host *host = platform_get_drvdata(pdev); - int irq[2]; host->dying = true; clk_prepare_enable(host->hclk); @@ -1523,16 +1513,6 @@ static int sh_mmcif_remove(struct platform_device *pdev) */ cancel_delayed_work_sync(&host->timeout_work); - if (host->addr) - iounmap(host->addr); - - irq[0] = platform_get_irq(pdev, 0); - irq[1] = platform_get_irq(pdev, 1); - - free_irq(irq[0], host); - if (irq[1] >= 0) - free_irq(irq[1], host); - clk_disable_unprepare(host->hclk); mmc_free_host(host->mmc); pm_runtime_put_sync(&pdev->dev); diff --git a/drivers/mmc/host/tmio_mmc_dma.c b/drivers/mmc/host/tmio_mmc_dma.c index 03e7b28..eb8f1d5 100644 --- a/drivers/mmc/host/tmio_mmc_dma.c +++ b/drivers/mmc/host/tmio_mmc_dma.c @@ -294,6 +294,7 @@ void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdat cfg.slave_id = pdata->dma->slave_id_tx; cfg.direction = DMA_MEM_TO_DEV; cfg.dst_addr = res->start + (CTL_SD_DATA_PORT << host->pdata->bus_shift); + cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; cfg.src_addr = 0; ret = dmaengine_slave_config(host->chan_tx, &cfg); if (ret < 0) @@ -312,6 +313,7 @@ void tmio_mmc_request_dma(struct tmio_mmc_host *host, struct tmio_mmc_data *pdat cfg.slave_id = pdata->dma->slave_id_rx; cfg.direction = DMA_DEV_TO_MEM; cfg.src_addr = cfg.dst_addr; + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES; cfg.dst_addr = 0; ret = dmaengine_slave_config(host->chan_rx, &cfg); if (ret < 0) diff --git a/drivers/mmc/host/wmt-sdmmc.c b/drivers/mmc/host/wmt-sdmmc.c index 282891a..54181b4 100644 --- a/drivers/mmc/host/wmt-sdmmc.c +++ b/drivers/mmc/host/wmt-sdmmc.c @@ -72,7 +72,6 @@ #define BM_SPI_CS 0x20 #define BM_SD_POWER 0x40 #define BM_SOFT_RESET 0x80 -#define BM_ONEBIT_MASK 0xFD /* SDMMC_BLKLEN bit fields */ #define BLKL_CRCERR_ABORT 0x0800 @@ -120,6 +119,8 @@ #define STS2_DATARSP_BUSY 0x20 #define STS2_DIS_FORCECLK 0x80 +/* SDMMC_EXTCTRL bit fields */ +#define EXT_EIGHTBIT 0x04 /* MMC/SD DMA Controller Registers */ #define SDDMA_GCR 0x100 @@ -672,7 +673,7 @@ static void wmt_mci_request(struct mmc_host *mmc, struct mmc_request *req) static void wmt_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) { struct wmt_mci_priv *priv; - u32 reg_tmp; + u32 busmode, extctrl; priv = mmc_priv(mmc); @@ -687,28 +688,26 @@ static void wmt_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) if (ios->clock != 0) clk_set_rate(priv->clk_sdmmc, ios->clock); + busmode = readb(priv->sdmmc_base + SDMMC_BUSMODE); + extctrl = readb(priv->sdmmc_base + SDMMC_EXTCTRL); + + busmode &= ~(BM_EIGHTBIT_MODE | BM_FOURBIT_MODE); + extctrl &= ~EXT_EIGHTBIT; + switch (ios->bus_width) { case MMC_BUS_WIDTH_8: - reg_tmp = readb(priv->sdmmc_base + SDMMC_EXTCTRL); - writeb(reg_tmp | 0x04, priv->sdmmc_base + SDMMC_EXTCTRL); + busmode |= BM_EIGHTBIT_MODE; + extctrl |= EXT_EIGHTBIT; break; case MMC_BUS_WIDTH_4: - reg_tmp = readb(priv->sdmmc_base + SDMMC_BUSMODE); - writeb(reg_tmp | BM_FOURBIT_MODE, priv->sdmmc_base + - SDMMC_BUSMODE); - - reg_tmp = readb(priv->sdmmc_base + SDMMC_EXTCTRL); - writeb(reg_tmp & 0xFB, priv->sdmmc_base + SDMMC_EXTCTRL); + busmode |= BM_FOURBIT_MODE; break; case MMC_BUS_WIDTH_1: - reg_tmp = readb(priv->sdmmc_base + SDMMC_BUSMODE); - writeb(reg_tmp & BM_ONEBIT_MASK, priv->sdmmc_base + - SDMMC_BUSMODE); - - reg_tmp = readb(priv->sdmmc_base + SDMMC_EXTCTRL); - writeb(reg_tmp & 0xFB, priv->sdmmc_base + SDMMC_EXTCTRL); break; } + + writeb(busmode, priv->sdmmc_base + SDMMC_BUSMODE); + writeb(extctrl, priv->sdmmc_base + SDMMC_EXTCTRL); } static int wmt_mci_get_ro(struct mmc_host *mmc) @@ -830,7 +829,7 @@ static int wmt_mci_probe(struct platform_device *pdev) goto fail3; } - ret = request_irq(dma_irq, wmt_mci_dma_isr, 32, "sdmmc", priv); + ret = request_irq(dma_irq, wmt_mci_dma_isr, 0, "sdmmc", priv); if (ret) { dev_err(&pdev->dev, "Register DMA IRQ fail\n"); goto fail4; |