diff options
Diffstat (limited to 'drivers/mtd/devices/doc2001plus.c')
-rw-r--r-- | drivers/mtd/devices/doc2001plus.c | 1080 |
1 files changed, 0 insertions, 1080 deletions
diff --git a/drivers/mtd/devices/doc2001plus.c b/drivers/mtd/devices/doc2001plus.c deleted file mode 100644 index 1b0c12f..0000000 --- a/drivers/mtd/devices/doc2001plus.c +++ /dev/null @@ -1,1080 +0,0 @@ -/* - * Linux driver for Disk-On-Chip Millennium Plus - * - * (c) 2002-2003 Greg Ungerer <gerg@snapgear.com> - * (c) 2002-2003 SnapGear Inc - * (c) 1999 Machine Vision Holdings, Inc. - * (c) 1999, 2000 David Woodhouse <dwmw2@infradead.org> - * - * Released under GPL - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <asm/errno.h> -#include <asm/io.h> -#include <asm/uaccess.h> -#include <linux/delay.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/bitops.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/doc2000.h> - -/* #define ECC_DEBUG */ - -/* I have no idea why some DoC chips can not use memcop_form|to_io(). - * This may be due to the different revisions of the ASIC controller built-in or - * simplily a QA/Bug issue. Who knows ?? If you have trouble, please uncomment - * this:*/ -#undef USE_MEMCPY - -static int doc_read(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, u_char *buf); -static int doc_write(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf); -static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, - struct mtd_oob_ops *ops); -static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, - struct mtd_oob_ops *ops); -static int doc_erase (struct mtd_info *mtd, struct erase_info *instr); - -static struct mtd_info *docmilpluslist = NULL; - - -/* Perform the required delay cycles by writing to the NOP register */ -static void DoC_Delay(void __iomem * docptr, int cycles) -{ - int i; - - for (i = 0; (i < cycles); i++) - WriteDOC(0, docptr, Mplus_NOP); -} - -#define CDSN_CTRL_FR_B_MASK (CDSN_CTRL_FR_B0 | CDSN_CTRL_FR_B1) - -/* DOC_WaitReady: Wait for RDY line to be asserted by the flash chip */ -static int _DoC_WaitReady(void __iomem * docptr) -{ - unsigned int c = 0xffff; - - pr_debug("_DoC_WaitReady called for out-of-line wait\n"); - - /* Out-of-line routine to wait for chip response */ - while (((ReadDOC(docptr, Mplus_FlashControl) & CDSN_CTRL_FR_B_MASK) != CDSN_CTRL_FR_B_MASK) && --c) - ; - - if (c == 0) - pr_debug("_DoC_WaitReady timed out.\n"); - - return (c == 0); -} - -static inline int DoC_WaitReady(void __iomem * docptr) -{ - /* This is inline, to optimise the common case, where it's ready instantly */ - int ret = 0; - - /* read form NOP register should be issued prior to the read from CDSNControl - see Software Requirement 11.4 item 2. */ - DoC_Delay(docptr, 4); - - if ((ReadDOC(docptr, Mplus_FlashControl) & CDSN_CTRL_FR_B_MASK) != CDSN_CTRL_FR_B_MASK) - /* Call the out-of-line routine to wait */ - ret = _DoC_WaitReady(docptr); - - return ret; -} - -/* For some reason the Millennium Plus seems to occasionally put itself - * into reset mode. For me this happens randomly, with no pattern that I - * can detect. M-systems suggest always check this on any block level - * operation and setting to normal mode if in reset mode. - */ -static inline void DoC_CheckASIC(void __iomem * docptr) -{ - /* Make sure the DoC is in normal mode */ - if ((ReadDOC(docptr, Mplus_DOCControl) & DOC_MODE_NORMAL) == 0) { - WriteDOC((DOC_MODE_NORMAL | DOC_MODE_MDWREN), docptr, Mplus_DOCControl); - WriteDOC(~(DOC_MODE_NORMAL | DOC_MODE_MDWREN), docptr, Mplus_CtrlConfirm); - } -} - -/* DoC_Command: Send a flash command to the flash chip through the Flash - * command register. Need 2 Write Pipeline Terminates to complete send. - */ -static void DoC_Command(void __iomem * docptr, unsigned char command, - unsigned char xtraflags) -{ - WriteDOC(command, docptr, Mplus_FlashCmd); - WriteDOC(command, docptr, Mplus_WritePipeTerm); - WriteDOC(command, docptr, Mplus_WritePipeTerm); -} - -/* DoC_Address: Set the current address for the flash chip through the Flash - * Address register. Need 2 Write Pipeline Terminates to complete send. - */ -static inline void DoC_Address(struct DiskOnChip *doc, int numbytes, - unsigned long ofs, unsigned char xtraflags1, - unsigned char xtraflags2) -{ - void __iomem * docptr = doc->virtadr; - - /* Allow for possible Mill Plus internal flash interleaving */ - ofs >>= doc->interleave; - - switch (numbytes) { - case 1: - /* Send single byte, bits 0-7. */ - WriteDOC(ofs & 0xff, docptr, Mplus_FlashAddress); - break; - case 2: - /* Send bits 9-16 followed by 17-23 */ - WriteDOC((ofs >> 9) & 0xff, docptr, Mplus_FlashAddress); - WriteDOC((ofs >> 17) & 0xff, docptr, Mplus_FlashAddress); - break; - case 3: - /* Send 0-7, 9-16, then 17-23 */ - WriteDOC(ofs & 0xff, docptr, Mplus_FlashAddress); - WriteDOC((ofs >> 9) & 0xff, docptr, Mplus_FlashAddress); - WriteDOC((ofs >> 17) & 0xff, docptr, Mplus_FlashAddress); - break; - default: - return; - } - - WriteDOC(0x00, docptr, Mplus_WritePipeTerm); - WriteDOC(0x00, docptr, Mplus_WritePipeTerm); -} - -/* DoC_SelectChip: Select a given flash chip within the current floor */ -static int DoC_SelectChip(void __iomem * docptr, int chip) -{ - /* No choice for flash chip on Millennium Plus */ - return 0; -} - -/* DoC_SelectFloor: Select a given floor (bank of flash chips) */ -static int DoC_SelectFloor(void __iomem * docptr, int floor) -{ - WriteDOC((floor & 0x3), docptr, Mplus_DeviceSelect); - return 0; -} - -/* - * Translate the given offset into the appropriate command and offset. - * This does the mapping using the 16bit interleave layout defined by - * M-Systems, and looks like this for a sector pair: - * +-----------+-------+-------+-------+--------------+---------+-----------+ - * | 0 --- 511 |512-517|518-519|520-521| 522 --- 1033 |1034-1039|1040 - 1055| - * +-----------+-------+-------+-------+--------------+---------+-----------+ - * | Data 0 | ECC 0 |Flags0 |Flags1 | Data 1 |ECC 1 | OOB 1 + 2 | - * +-----------+-------+-------+-------+--------------+---------+-----------+ - */ -/* FIXME: This lives in INFTL not here. Other users of flash devices - may not want it */ -static unsigned int DoC_GetDataOffset(struct mtd_info *mtd, loff_t *from) -{ - struct DiskOnChip *this = mtd->priv; - - if (this->interleave) { - unsigned int ofs = *from & 0x3ff; - unsigned int cmd; - - if (ofs < 512) { - cmd = NAND_CMD_READ0; - ofs &= 0x1ff; - } else if (ofs < 1014) { - cmd = NAND_CMD_READ1; - ofs = (ofs & 0x1ff) + 10; - } else { - cmd = NAND_CMD_READOOB; - ofs = ofs - 1014; - } - - *from = (*from & ~0x3ff) | ofs; - return cmd; - } else { - /* No interleave */ - if ((*from) & 0x100) - return NAND_CMD_READ1; - return NAND_CMD_READ0; - } -} - -static unsigned int DoC_GetECCOffset(struct mtd_info *mtd, loff_t *from) -{ - unsigned int ofs, cmd; - - if (*from & 0x200) { - cmd = NAND_CMD_READOOB; - ofs = 10 + (*from & 0xf); - } else { - cmd = NAND_CMD_READ1; - ofs = (*from & 0xf); - } - - *from = (*from & ~0x3ff) | ofs; - return cmd; -} - -static unsigned int DoC_GetFlagsOffset(struct mtd_info *mtd, loff_t *from) -{ - unsigned int ofs, cmd; - - cmd = NAND_CMD_READ1; - ofs = (*from & 0x200) ? 8 : 6; - *from = (*from & ~0x3ff) | ofs; - return cmd; -} - -static unsigned int DoC_GetHdrOffset(struct mtd_info *mtd, loff_t *from) -{ - unsigned int ofs, cmd; - - cmd = NAND_CMD_READOOB; - ofs = (*from & 0x200) ? 24 : 16; - *from = (*from & ~0x3ff) | ofs; - return cmd; -} - -static inline void MemReadDOC(void __iomem * docptr, unsigned char *buf, int len) -{ -#ifndef USE_MEMCPY - int i; - for (i = 0; i < len; i++) - buf[i] = ReadDOC(docptr, Mil_CDSN_IO + i); -#else - memcpy_fromio(buf, docptr + DoC_Mil_CDSN_IO, len); -#endif -} - -static inline void MemWriteDOC(void __iomem * docptr, unsigned char *buf, int len) -{ -#ifndef USE_MEMCPY - int i; - for (i = 0; i < len; i++) - WriteDOC(buf[i], docptr, Mil_CDSN_IO + i); -#else - memcpy_toio(docptr + DoC_Mil_CDSN_IO, buf, len); -#endif -} - -/* DoC_IdentChip: Identify a given NAND chip given {floor,chip} */ -static int DoC_IdentChip(struct DiskOnChip *doc, int floor, int chip) -{ - int mfr, id, i, j; - volatile char dummy; - void __iomem * docptr = doc->virtadr; - - /* Page in the required floor/chip */ - DoC_SelectFloor(docptr, floor); - DoC_SelectChip(docptr, chip); - - /* Millennium Plus bus cycle sequence as per figure 2, section 2.4 */ - WriteDOC((DOC_FLASH_CE | DOC_FLASH_WP), docptr, Mplus_FlashSelect); - - /* Reset the chip, see Software Requirement 11.4 item 1. */ - DoC_Command(docptr, NAND_CMD_RESET, 0); - DoC_WaitReady(docptr); - - /* Read the NAND chip ID: 1. Send ReadID command */ - DoC_Command(docptr, NAND_CMD_READID, 0); - - /* Read the NAND chip ID: 2. Send address byte zero */ - DoC_Address(doc, 1, 0x00, 0, 0x00); - - WriteDOC(0, docptr, Mplus_FlashControl); - DoC_WaitReady(docptr); - - /* Read the manufacturer and device id codes of the flash device through - CDSN IO register see Software Requirement 11.4 item 5.*/ - dummy = ReadDOC(docptr, Mplus_ReadPipeInit); - dummy = ReadDOC(docptr, Mplus_ReadPipeInit); - - mfr = ReadDOC(docptr, Mil_CDSN_IO); - if (doc->interleave) - dummy = ReadDOC(docptr, Mil_CDSN_IO); /* 2 way interleave */ - - id = ReadDOC(docptr, Mil_CDSN_IO); - if (doc->interleave) - dummy = ReadDOC(docptr, Mil_CDSN_IO); /* 2 way interleave */ - - dummy = ReadDOC(docptr, Mplus_LastDataRead); - dummy = ReadDOC(docptr, Mplus_LastDataRead); - - /* Disable flash internally */ - WriteDOC(0, docptr, Mplus_FlashSelect); - - /* No response - return failure */ - if (mfr == 0xff || mfr == 0) - return 0; - - for (i = 0; nand_flash_ids[i].name != NULL; i++) { - if (id == nand_flash_ids[i].dev_id) { - /* Try to identify manufacturer */ - for (j = 0; nand_manuf_ids[j].id != 0x0; j++) { - if (nand_manuf_ids[j].id == mfr) - break; - } - printk(KERN_INFO "Flash chip found: Manufacturer ID: %2.2X, " - "Chip ID: %2.2X (%s:%s)\n", mfr, id, - nand_manuf_ids[j].name, nand_flash_ids[i].name); - doc->mfr = mfr; - doc->id = id; - doc->chipshift = ffs((nand_flash_ids[i].chipsize << 20)) - 1; - doc->erasesize = nand_flash_ids[i].erasesize << doc->interleave; - break; - } - } - - if (nand_flash_ids[i].name == NULL) - return 0; - return 1; -} - -/* DoC_ScanChips: Find all NAND chips present in a DiskOnChip, and identify them */ -static void DoC_ScanChips(struct DiskOnChip *this) -{ - int floor, chip; - int numchips[MAX_FLOORS_MPLUS]; - int ret; - - this->numchips = 0; - this->mfr = 0; - this->id = 0; - - /* Work out the intended interleave setting */ - this->interleave = 0; - if (this->ChipID == DOC_ChipID_DocMilPlus32) - this->interleave = 1; - - /* Check the ASIC agrees */ - if ( (this->interleave << 2) != - (ReadDOC(this->virtadr, Mplus_Configuration) & 4)) { - u_char conf = ReadDOC(this->virtadr, Mplus_Configuration); - printk(KERN_NOTICE "Setting DiskOnChip Millennium Plus interleave to %s\n", - this->interleave?"on (16-bit)":"off (8-bit)"); - conf ^= 4; - WriteDOC(conf, this->virtadr, Mplus_Configuration); - } - - /* For each floor, find the number of valid chips it contains */ - for (floor = 0,ret = 1; floor < MAX_FLOORS_MPLUS; floor++) { - numchips[floor] = 0; - for (chip = 0; chip < MAX_CHIPS_MPLUS && ret != 0; chip++) { - ret = DoC_IdentChip(this, floor, chip); - if (ret) { - numchips[floor]++; - this->numchips++; - } - } - } - /* If there are none at all that we recognise, bail */ - if (!this->numchips) { - printk("No flash chips recognised.\n"); - return; - } - - /* Allocate an array to hold the information for each chip */ - this->chips = kmalloc(sizeof(struct Nand) * this->numchips, GFP_KERNEL); - if (!this->chips){ - printk("MTD: No memory for allocating chip info structures\n"); - return; - } - - /* Fill out the chip array with {floor, chipno} for each - * detected chip in the device. */ - for (floor = 0, ret = 0; floor < MAX_FLOORS_MPLUS; floor++) { - for (chip = 0 ; chip < numchips[floor] ; chip++) { - this->chips[ret].floor = floor; - this->chips[ret].chip = chip; - this->chips[ret].curadr = 0; - this->chips[ret].curmode = 0x50; - ret++; - } - } - - /* Calculate and print the total size of the device */ - this->totlen = this->numchips * (1 << this->chipshift); - printk(KERN_INFO "%d flash chips found. Total DiskOnChip size: %ld MiB\n", - this->numchips ,this->totlen >> 20); -} - -static int DoCMilPlus_is_alias(struct DiskOnChip *doc1, struct DiskOnChip *doc2) -{ - int tmp1, tmp2, retval; - - if (doc1->physadr == doc2->physadr) - return 1; - - /* Use the alias resolution register which was set aside for this - * purpose. If it's value is the same on both chips, they might - * be the same chip, and we write to one and check for a change in - * the other. It's unclear if this register is usuable in the - * DoC 2000 (it's in the Millennium docs), but it seems to work. */ - tmp1 = ReadDOC(doc1->virtadr, Mplus_AliasResolution); - tmp2 = ReadDOC(doc2->virtadr, Mplus_AliasResolution); - if (tmp1 != tmp2) - return 0; - - WriteDOC((tmp1+1) % 0xff, doc1->virtadr, Mplus_AliasResolution); - tmp2 = ReadDOC(doc2->virtadr, Mplus_AliasResolution); - if (tmp2 == (tmp1+1) % 0xff) - retval = 1; - else - retval = 0; - - /* Restore register contents. May not be necessary, but do it just to - * be safe. */ - WriteDOC(tmp1, doc1->virtadr, Mplus_AliasResolution); - - return retval; -} - -/* This routine is found from the docprobe code by symbol_get(), - * which will bump the use count of this module. */ -void DoCMilPlus_init(struct mtd_info *mtd) -{ - struct DiskOnChip *this = mtd->priv; - struct DiskOnChip *old = NULL; - - /* We must avoid being called twice for the same device. */ - if (docmilpluslist) - old = docmilpluslist->priv; - - while (old) { - if (DoCMilPlus_is_alias(this, old)) { - printk(KERN_NOTICE "Ignoring DiskOnChip Millennium " - "Plus at 0x%lX - already configured\n", - this->physadr); - iounmap(this->virtadr); - kfree(mtd); - return; - } - if (old->nextdoc) - old = old->nextdoc->priv; - else - old = NULL; - } - - mtd->name = "DiskOnChip Millennium Plus"; - printk(KERN_NOTICE "DiskOnChip Millennium Plus found at " - "address 0x%lX\n", this->physadr); - - mtd->type = MTD_NANDFLASH; - mtd->flags = MTD_CAP_NANDFLASH; - mtd->writebufsize = mtd->writesize = 512; - mtd->oobsize = 16; - mtd->ecc_strength = 2; - mtd->owner = THIS_MODULE; - mtd->_erase = doc_erase; - mtd->_read = doc_read; - mtd->_write = doc_write; - mtd->_read_oob = doc_read_oob; - mtd->_write_oob = doc_write_oob; - this->curfloor = -1; - this->curchip = -1; - - /* Ident all the chips present. */ - DoC_ScanChips(this); - - if (!this->totlen) { - kfree(mtd); - iounmap(this->virtadr); - } else { - this->nextdoc = docmilpluslist; - docmilpluslist = mtd; - mtd->size = this->totlen; - mtd->erasesize = this->erasesize; - mtd_device_register(mtd, NULL, 0); - return; - } -} -EXPORT_SYMBOL_GPL(DoCMilPlus_init); - -#if 0 -static int doc_dumpblk(struct mtd_info *mtd, loff_t from) -{ - int i; - loff_t fofs; - struct DiskOnChip *this = mtd->priv; - void __iomem * docptr = this->virtadr; - struct Nand *mychip = &this->chips[from >> (this->chipshift)]; - unsigned char *bp, buf[1056]; - char c[32]; - - from &= ~0x3ff; - - /* Don't allow read past end of device */ - if (from >= this->totlen) - return -EINVAL; - - DoC_CheckASIC(docptr); - - /* Find the chip which is to be used and select it */ - if (this->curfloor != mychip->floor) { - DoC_SelectFloor(docptr, mychip->floor); - DoC_SelectChip(docptr, mychip->chip); - } else if (this->curchip != mychip->chip) { - DoC_SelectChip(docptr, mychip->chip); - } - this->curfloor = mychip->floor; - this->curchip = mychip->chip; - - /* Millennium Plus bus cycle sequence as per figure 2, section 2.4 */ - WriteDOC((DOC_FLASH_CE | DOC_FLASH_WP), docptr, Mplus_FlashSelect); - - /* Reset the chip, see Software Requirement 11.4 item 1. */ - DoC_Command(docptr, NAND_CMD_RESET, 0); - DoC_WaitReady(docptr); - - fofs = from; - DoC_Command(docptr, DoC_GetDataOffset(mtd, &fofs), 0); - DoC_Address(this, 3, fofs, 0, 0x00); - WriteDOC(0, docptr, Mplus_FlashControl); - DoC_WaitReady(docptr); - - /* disable the ECC engine */ - WriteDOC(DOC_ECC_RESET, docptr, Mplus_ECCConf); - - ReadDOC(docptr, Mplus_ReadPipeInit); - ReadDOC(docptr, Mplus_ReadPipeInit); - - /* Read the data via the internal pipeline through CDSN IO - register, see Pipelined Read Operations 11.3 */ - MemReadDOC(docptr, buf, 1054); - buf[1054] = ReadDOC(docptr, Mplus_LastDataRead); - buf[1055] = ReadDOC(docptr, Mplus_LastDataRead); - - memset(&c[0], 0, sizeof(c)); - printk("DUMP OFFSET=%x:\n", (int)from); - - for (i = 0, bp = &buf[0]; (i < 1056); i++) { - if ((i % 16) == 0) - printk("%08x: ", i); - printk(" %02x", *bp); - c[(i & 0xf)] = ((*bp >= 0x20) && (*bp <= 0x7f)) ? *bp : '.'; - bp++; - if (((i + 1) % 16) == 0) - printk(" %s\n", c); - } - printk("\n"); - - /* Disable flash internally */ - WriteDOC(0, docptr, Mplus_FlashSelect); - - return 0; -} -#endif - -static int doc_read(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, u_char *buf) -{ - int ret, i; - volatile char dummy; - loff_t fofs; - unsigned char syndrome[6], eccbuf[6]; - struct DiskOnChip *this = mtd->priv; - void __iomem * docptr = this->virtadr; - struct Nand *mychip = &this->chips[from >> (this->chipshift)]; - - /* Don't allow a single read to cross a 512-byte block boundary */ - if (from + len > ((from | 0x1ff) + 1)) - len = ((from | 0x1ff) + 1) - from; - - DoC_CheckASIC(docptr); - - /* Find the chip which is to be used and select it */ - if (this->curfloor != mychip->floor) { - DoC_SelectFloor(docptr, mychip->floor); - DoC_SelectChip(docptr, mychip->chip); - } else if (this->curchip != mychip->chip) { - DoC_SelectChip(docptr, mychip->chip); - } - this->curfloor = mychip->floor; - this->curchip = mychip->chip; - - /* Millennium Plus bus cycle sequence as per figure 2, section 2.4 */ - WriteDOC((DOC_FLASH_CE | DOC_FLASH_WP), docptr, Mplus_FlashSelect); - - /* Reset the chip, see Software Requirement 11.4 item 1. */ - DoC_Command(docptr, NAND_CMD_RESET, 0); - DoC_WaitReady(docptr); - - fofs = from; - DoC_Command(docptr, DoC_GetDataOffset(mtd, &fofs), 0); - DoC_Address(this, 3, fofs, 0, 0x00); - WriteDOC(0, docptr, Mplus_FlashControl); - DoC_WaitReady(docptr); - - /* init the ECC engine, see Reed-Solomon EDC/ECC 11.1 .*/ - WriteDOC(DOC_ECC_RESET, docptr, Mplus_ECCConf); - WriteDOC(DOC_ECC_EN, docptr, Mplus_ECCConf); - - /* Let the caller know we completed it */ - *retlen = len; - ret = 0; - - ReadDOC(docptr, Mplus_ReadPipeInit); - ReadDOC(docptr, Mplus_ReadPipeInit); - - /* Read the data via the internal pipeline through CDSN IO - register, see Pipelined Read Operations 11.3 */ - MemReadDOC(docptr, buf, len); - - /* Read the ECC data following raw data */ - MemReadDOC(docptr, eccbuf, 4); - eccbuf[4] = ReadDOC(docptr, Mplus_LastDataRead); - eccbuf[5] = ReadDOC(docptr, Mplus_LastDataRead); - - /* Flush the pipeline */ - dummy = ReadDOC(docptr, Mplus_ECCConf); - dummy = ReadDOC(docptr, Mplus_ECCConf); - - /* Check the ECC Status */ - if (ReadDOC(docptr, Mplus_ECCConf) & 0x80) { - int nb_errors; - /* There was an ECC error */ -#ifdef ECC_DEBUG - printk("DiskOnChip ECC Error: Read at %lx\n", (long)from); -#endif - /* Read the ECC syndrome through the DiskOnChip ECC logic. - These syndrome will be all ZERO when there is no error */ - for (i = 0; i < 6; i++) - syndrome[i] = ReadDOC(docptr, Mplus_ECCSyndrome0 + i); - - nb_errors = doc_decode_ecc(buf, syndrome); -#ifdef ECC_DEBUG - printk("ECC Errors corrected: %x\n", nb_errors); -#endif - if (nb_errors < 0) { - /* We return error, but have actually done the - read. Not that this can be told to user-space, via - sys_read(), but at least MTD-aware stuff can know - about it by checking *retlen */ -#ifdef ECC_DEBUG - printk("%s(%d): Millennium Plus ECC error (from=0x%x:\n", - __FILE__, __LINE__, (int)from); - printk(" syndrome= %*phC\n", 6, syndrome); - printk(" eccbuf= %*phC\n", 6, eccbuf); -#endif - ret = -EIO; - } - } - -#ifdef PSYCHO_DEBUG - printk("ECC DATA at %lx: %*ph\n", (long)from, 6, eccbuf); -#endif - /* disable the ECC engine */ - WriteDOC(DOC_ECC_DIS, docptr , Mplus_ECCConf); - - /* Disable flash internally */ - WriteDOC(0, docptr, Mplus_FlashSelect); - - return ret; -} - -static int doc_write(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const u_char *buf) -{ - int i, before, ret = 0; - loff_t fto; - volatile char dummy; - char eccbuf[6]; - struct DiskOnChip *this = mtd->priv; - void __iomem * docptr = this->virtadr; - struct Nand *mychip = &this->chips[to >> (this->chipshift)]; - - /* Don't allow writes which aren't exactly one block (512 bytes) */ - if ((to & 0x1ff) || (len != 0x200)) - return -EINVAL; - - /* Determine position of OOB flags, before or after data */ - before = (this->interleave && (to & 0x200)); - - DoC_CheckASIC(docptr); - - /* Find the chip which is to be used and select it */ - if (this->curfloor != mychip->floor) { - DoC_SelectFloor(docptr, mychip->floor); - DoC_SelectChip(docptr, mychip->chip); - } else if (this->curchip != mychip->chip) { - DoC_SelectChip(docptr, mychip->chip); - } - this->curfloor = mychip->floor; - this->curchip = mychip->chip; - - /* Millennium Plus bus cycle sequence as per figure 2, section 2.4 */ - WriteDOC(DOC_FLASH_CE, docptr, Mplus_FlashSelect); - - /* Reset the chip, see Software Requirement 11.4 item 1. */ - DoC_Command(docptr, NAND_CMD_RESET, 0); - DoC_WaitReady(docptr); - - /* Set device to appropriate plane of flash */ - fto = to; - WriteDOC(DoC_GetDataOffset(mtd, &fto), docptr, Mplus_FlashCmd); - - /* On interleaved devices the flags for 2nd half 512 are before data */ - if (before) - fto -= 2; - - /* issue the Serial Data In command to initial the Page Program process */ - DoC_Command(docptr, NAND_CMD_SEQIN, 0x00); - DoC_Address(this, 3, fto, 0x00, 0x00); - - /* Disable the ECC engine */ - WriteDOC(DOC_ECC_RESET, docptr, Mplus_ECCConf); - - if (before) { - /* Write the block status BLOCK_USED (0x5555) */ - WriteDOC(0x55, docptr, Mil_CDSN_IO); - WriteDOC(0x55, docptr, Mil_CDSN_IO); - } - - /* init the ECC engine, see Reed-Solomon EDC/ECC 11.1 .*/ - WriteDOC(DOC_ECC_EN | DOC_ECC_RW, docptr, Mplus_ECCConf); - - MemWriteDOC(docptr, (unsigned char *) buf, len); - - /* Write ECC data to flash, the ECC info is generated by - the DiskOnChip ECC logic see Reed-Solomon EDC/ECC 11.1 */ - DoC_Delay(docptr, 3); - - /* Read the ECC data through the DiskOnChip ECC logic */ - for (i = 0; i < 6; i++) - eccbuf[i] = ReadDOC(docptr, Mplus_ECCSyndrome0 + i); - - /* disable the ECC engine */ - WriteDOC(DOC_ECC_DIS, docptr, Mplus_ECCConf); - - /* Write the ECC data to flash */ - MemWriteDOC(docptr, eccbuf, 6); - - if (!before) { - /* Write the block status BLOCK_USED (0x5555) */ - WriteDOC(0x55, docptr, Mil_CDSN_IO+6); - WriteDOC(0x55, docptr, Mil_CDSN_IO+7); - } - -#ifdef PSYCHO_DEBUG - printk("OOB data at %lx is %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n", - (long) to, eccbuf[0], eccbuf[1], eccbuf[2], eccbuf[3], - eccbuf[4], eccbuf[5]); -#endif - - WriteDOC(0x00, docptr, Mplus_WritePipeTerm); - WriteDOC(0x00, docptr, Mplus_WritePipeTerm); - - /* Commit the Page Program command and wait for ready - see Software Requirement 11.4 item 1.*/ - DoC_Command(docptr, NAND_CMD_PAGEPROG, 0x00); - DoC_WaitReady(docptr); - - /* Read the status of the flash device through CDSN IO register - see Software Requirement 11.4 item 5.*/ - DoC_Command(docptr, NAND_CMD_STATUS, 0); - dummy = ReadDOC(docptr, Mplus_ReadPipeInit); - dummy = ReadDOC(docptr, Mplus_ReadPipeInit); - DoC_Delay(docptr, 2); - if ((dummy = ReadDOC(docptr, Mplus_LastDataRead)) & 1) { - printk("MTD: Error 0x%x programming at 0x%x\n", dummy, (int)to); - /* Error in programming - FIXME: implement Bad Block Replacement (in nftl.c ??) */ - ret = -EIO; - } - dummy = ReadDOC(docptr, Mplus_LastDataRead); - - /* Disable flash internally */ - WriteDOC(0, docptr, Mplus_FlashSelect); - - /* Let the caller know we completed it */ - *retlen = len; - - return ret; -} - -static int doc_read_oob(struct mtd_info *mtd, loff_t ofs, - struct mtd_oob_ops *ops) -{ - loff_t fofs, base; - struct DiskOnChip *this = mtd->priv; - void __iomem * docptr = this->virtadr; - struct Nand *mychip = &this->chips[ofs >> this->chipshift]; - size_t i, size, got, want; - uint8_t *buf = ops->oobbuf; - size_t len = ops->len; - - BUG_ON(ops->mode != MTD_OPS_PLACE_OOB); - - ofs += ops->ooboffs; - - DoC_CheckASIC(docptr); - - /* Find the chip which is to be used and select it */ - if (this->curfloor != mychip->floor) { - DoC_SelectFloor(docptr, mychip->floor); - DoC_SelectChip(docptr, mychip->chip); - } else if (this->curchip != mychip->chip) { - DoC_SelectChip(docptr, mychip->chip); - } - this->curfloor = mychip->floor; - this->curchip = mychip->chip; - - /* Millennium Plus bus cycle sequence as per figure 2, section 2.4 */ - WriteDOC((DOC_FLASH_CE | DOC_FLASH_WP), docptr, Mplus_FlashSelect); - - /* disable the ECC engine */ - WriteDOC(DOC_ECC_RESET, docptr, Mplus_ECCConf); - DoC_WaitReady(docptr); - - /* Maximum of 16 bytes in the OOB region, so limit read to that */ - if (len > 16) - len = 16; - got = 0; - want = len; - - for (i = 0; ((i < 3) && (want > 0)); i++) { - /* Figure out which region we are accessing... */ - fofs = ofs; - base = ofs & 0xf; - if (!this->interleave) { - DoC_Command(docptr, NAND_CMD_READOOB, 0); - size = 16 - base; - } else if (base < 6) { - DoC_Command(docptr, DoC_GetECCOffset(mtd, &fofs), 0); - size = 6 - base; - } else if (base < 8) { - DoC_Command(docptr, DoC_GetFlagsOffset(mtd, &fofs), 0); - size = 8 - base; - } else { - DoC_Command(docptr, DoC_GetHdrOffset(mtd, &fofs), 0); - size = 16 - base; - } - if (size > want) - size = want; - - /* Issue read command */ - DoC_Address(this, 3, fofs, 0, 0x00); - WriteDOC(0, docptr, Mplus_FlashControl); - DoC_WaitReady(docptr); - - ReadDOC(docptr, Mplus_ReadPipeInit); - ReadDOC(docptr, Mplus_ReadPipeInit); - MemReadDOC(docptr, &buf[got], size - 2); - buf[got + size - 2] = ReadDOC(docptr, Mplus_LastDataRead); - buf[got + size - 1] = ReadDOC(docptr, Mplus_LastDataRead); - - ofs += size; - got += size; - want -= size; - } - - /* Disable flash internally */ - WriteDOC(0, docptr, Mplus_FlashSelect); - - ops->retlen = len; - return 0; -} - -static int doc_write_oob(struct mtd_info *mtd, loff_t ofs, - struct mtd_oob_ops *ops) -{ - volatile char dummy; - loff_t fofs, base; - struct DiskOnChip *this = mtd->priv; - void __iomem * docptr = this->virtadr; - struct Nand *mychip = &this->chips[ofs >> this->chipshift]; - size_t i, size, got, want; - int ret = 0; - uint8_t *buf = ops->oobbuf; - size_t len = ops->len; - - BUG_ON(ops->mode != MTD_OPS_PLACE_OOB); - - ofs += ops->ooboffs; - - DoC_CheckASIC(docptr); - - /* Find the chip which is to be used and select it */ - if (this->curfloor != mychip->floor) { - DoC_SelectFloor(docptr, mychip->floor); - DoC_SelectChip(docptr, mychip->chip); - } else if (this->curchip != mychip->chip) { - DoC_SelectChip(docptr, mychip->chip); - } - this->curfloor = mychip->floor; - this->curchip = mychip->chip; - - /* Millennium Plus bus cycle sequence as per figure 2, section 2.4 */ - WriteDOC(DOC_FLASH_CE, docptr, Mplus_FlashSelect); - - - /* Maximum of 16 bytes in the OOB region, so limit write to that */ - if (len > 16) - len = 16; - got = 0; - want = len; - - for (i = 0; ((i < 3) && (want > 0)); i++) { - /* Reset the chip, see Software Requirement 11.4 item 1. */ - DoC_Command(docptr, NAND_CMD_RESET, 0); - DoC_WaitReady(docptr); - - /* Figure out which region we are accessing... */ - fofs = ofs; - base = ofs & 0x0f; - if (!this->interleave) { - WriteDOC(NAND_CMD_READOOB, docptr, Mplus_FlashCmd); - size = 16 - base; - } else if (base < 6) { - WriteDOC(DoC_GetECCOffset(mtd, &fofs), docptr, Mplus_FlashCmd); - size = 6 - base; - } else if (base < 8) { - WriteDOC(DoC_GetFlagsOffset(mtd, &fofs), docptr, Mplus_FlashCmd); - size = 8 - base; - } else { - WriteDOC(DoC_GetHdrOffset(mtd, &fofs), docptr, Mplus_FlashCmd); - size = 16 - base; - } - if (size > want) - size = want; - - /* Issue the Serial Data In command to initial the Page Program process */ - DoC_Command(docptr, NAND_CMD_SEQIN, 0x00); - DoC_Address(this, 3, fofs, 0, 0x00); - - /* Disable the ECC engine */ - WriteDOC(DOC_ECC_RESET, docptr, Mplus_ECCConf); - - /* Write the data via the internal pipeline through CDSN IO - register, see Pipelined Write Operations 11.2 */ - MemWriteDOC(docptr, (unsigned char *) &buf[got], size); - WriteDOC(0x00, docptr, Mplus_WritePipeTerm); - WriteDOC(0x00, docptr, Mplus_WritePipeTerm); - - /* Commit the Page Program command and wait for ready - see Software Requirement 11.4 item 1.*/ - DoC_Command(docptr, NAND_CMD_PAGEPROG, 0x00); - DoC_WaitReady(docptr); - - /* Read the status of the flash device through CDSN IO register - see Software Requirement 11.4 item 5.*/ - DoC_Command(docptr, NAND_CMD_STATUS, 0x00); - dummy = ReadDOC(docptr, Mplus_ReadPipeInit); - dummy = ReadDOC(docptr, Mplus_ReadPipeInit); - DoC_Delay(docptr, 2); - if ((dummy = ReadDOC(docptr, Mplus_LastDataRead)) & 1) { - printk("MTD: Error 0x%x programming oob at 0x%x\n", - dummy, (int)ofs); - /* FIXME: implement Bad Block Replacement */ - ops->retlen = 0; - ret = -EIO; - } - dummy = ReadDOC(docptr, Mplus_LastDataRead); - - ofs += size; - got += size; - want -= size; - } - - /* Disable flash internally */ - WriteDOC(0, docptr, Mplus_FlashSelect); - - ops->retlen = len; - return ret; -} - -int doc_erase(struct mtd_info *mtd, struct erase_info *instr) -{ - volatile char dummy; - struct DiskOnChip *this = mtd->priv; - __u32 ofs = instr->addr; - __u32 len = instr->len; - void __iomem * docptr = this->virtadr; - struct Nand *mychip = &this->chips[ofs >> this->chipshift]; - - DoC_CheckASIC(docptr); - - if (len != mtd->erasesize) - printk(KERN_WARNING "MTD: Erase not right size (%x != %x)n", - len, mtd->erasesize); - - /* Find the chip which is to be used and select it */ - if (this->curfloor != mychip->floor) { - DoC_SelectFloor(docptr, mychip->floor); - DoC_SelectChip(docptr, mychip->chip); - } else if (this->curchip != mychip->chip) { - DoC_SelectChip(docptr, mychip->chip); - } - this->curfloor = mychip->floor; - this->curchip = mychip->chip; - - instr->state = MTD_ERASE_PENDING; - - /* Millennium Plus bus cycle sequence as per figure 2, section 2.4 */ - WriteDOC(DOC_FLASH_CE, docptr, Mplus_FlashSelect); - - DoC_Command(docptr, NAND_CMD_RESET, 0x00); - DoC_WaitReady(docptr); - - DoC_Command(docptr, NAND_CMD_ERASE1, 0); - DoC_Address(this, 2, ofs, 0, 0x00); - DoC_Command(docptr, NAND_CMD_ERASE2, 0); - DoC_WaitReady(docptr); - instr->state = MTD_ERASING; - - /* Read the status of the flash device through CDSN IO register - see Software Requirement 11.4 item 5. */ - DoC_Command(docptr, NAND_CMD_STATUS, 0); - dummy = ReadDOC(docptr, Mplus_ReadPipeInit); - dummy = ReadDOC(docptr, Mplus_ReadPipeInit); - if ((dummy = ReadDOC(docptr, Mplus_LastDataRead)) & 1) { - printk("MTD: Error 0x%x erasing at 0x%x\n", dummy, ofs); - /* FIXME: implement Bad Block Replacement (in nftl.c ??) */ - instr->state = MTD_ERASE_FAILED; - } else { - instr->state = MTD_ERASE_DONE; - } - dummy = ReadDOC(docptr, Mplus_LastDataRead); - - /* Disable flash internally */ - WriteDOC(0, docptr, Mplus_FlashSelect); - - mtd_erase_callback(instr); - - return 0; -} - -/**************************************************************************** - * - * Module stuff - * - ****************************************************************************/ - -static void __exit cleanup_doc2001plus(void) -{ - struct mtd_info *mtd; - struct DiskOnChip *this; - - while ((mtd=docmilpluslist)) { - this = mtd->priv; - docmilpluslist = this->nextdoc; - - mtd_device_unregister(mtd); - - iounmap(this->virtadr); - kfree(this->chips); - kfree(mtd); - } -} - -module_exit(cleanup_doc2001plus); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Greg Ungerer <gerg@snapgear.com> et al."); -MODULE_DESCRIPTION("Driver for DiskOnChip Millennium Plus"); |