diff options
Diffstat (limited to 'drivers/mtd/nand/gpmi-nand/gpmi-lib.c')
| -rw-r--r-- | drivers/mtd/nand/gpmi-nand/gpmi-lib.c | 17 |
1 files changed, 9 insertions, 8 deletions
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c index 2289cf8..c95dbe8 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c @@ -728,6 +728,7 @@ return_results: hw->address_setup_in_cycles = address_setup_in_cycles; hw->use_half_periods = dll_use_half_periods; hw->sample_delay_factor = sample_delay_factor; + hw->device_busy_timeout = GPMI_DEFAULT_BUSY_TIMEOUT; /* Return success. */ return 0; @@ -752,26 +753,26 @@ void gpmi_begin(struct gpmi_nand_data *this) goto err_out; } - /* set ready/busy timeout */ - writel(0x500 << BP_GPMI_TIMING1_BUSY_TIMEOUT, - gpmi_regs + HW_GPMI_TIMING1); - /* Get the timing information we need. */ nfc->clock_frequency_in_hz = clk_get_rate(r->clock[0]); clock_period_in_ns = 1000000000 / nfc->clock_frequency_in_hz; gpmi_nfc_compute_hardware_timing(this, &hw); - /* Set up all the simple timing parameters. */ + /* [1] Set HW_GPMI_TIMING0 */ reg = BF_GPMI_TIMING0_ADDRESS_SETUP(hw.address_setup_in_cycles) | BF_GPMI_TIMING0_DATA_HOLD(hw.data_hold_in_cycles) | BF_GPMI_TIMING0_DATA_SETUP(hw.data_setup_in_cycles) ; writel(reg, gpmi_regs + HW_GPMI_TIMING0); - /* - * DLL_ENABLE must be set to 0 when setting RDN_DELAY or HALF_PERIOD. - */ + /* [2] Set HW_GPMI_TIMING1 */ + writel(BF_GPMI_TIMING1_BUSY_TIMEOUT(hw.device_busy_timeout), + gpmi_regs + HW_GPMI_TIMING1); + + /* [3] The following code is to set the HW_GPMI_CTRL1. */ + + /* DLL_ENABLE must be set to 0 when setting RDN_DELAY or HALF_PERIOD. */ writel(BM_GPMI_CTRL1_DLL_ENABLE, gpmi_regs + HW_GPMI_CTRL1_CLR); /* Clear out the DLL control fields. */ |