diff options
Diffstat (limited to 'drivers/net/ethernet/8390/Kconfig')
| -rw-r--r-- | drivers/net/ethernet/8390/Kconfig | 348 |
1 files changed, 348 insertions, 0 deletions
diff --git a/drivers/net/ethernet/8390/Kconfig b/drivers/net/ethernet/8390/Kconfig new file mode 100644 index 0000000..5cd53f1 --- /dev/null +++ b/drivers/net/ethernet/8390/Kconfig @@ -0,0 +1,348 @@ +# +# 8390 device configuration +# + +config NET_VENDOR_8390 + bool "National Semi-conductor 8390 devices" + depends on AMIGA_PCMCIA || PCI || SUPERH || ISA || MCA || EISA || \ + MAC || M32R || MACH_TX49XX || MCA_LEGACY || H8300 || \ + ARM || MIPS || ZORRO || PCMCIA || EXPERIMENTAL + ---help--- + If you have a network (Ethernet) card belonging to this class, say Y + and read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about Western Digital cards. If you say Y, you will be + asked for your specific card in the following questions. + +if NET_VENDOR_8390 + +config EL2 + tristate "3c503 \"EtherLink II\" support" + depends on ISA + select CRC32 + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here. The module + will be called 3c503. + +config AC3200 + tristate "Ansel Communications EISA 3200 support (EXPERIMENTAL)" + depends on PCI && (ISA || EISA) && EXPERIMENTAL + select CRC32 + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here. The module + will be called ac3200. + +config PCMCIA_AXNET + tristate "Asix AX88190 PCMCIA support" + depends on PCMCIA + ---help--- + Say Y here if you intend to attach an Asix AX88190-based PCMCIA + (PC-card) Fast Ethernet card to your computer. These cards are + nearly NE2000 compatible but need a separate driver due to a few + misfeatures. + + To compile this driver as a module, choose M here: the module will be + called axnet_cs. If unsure, say N. + +config AX88796 + tristate "ASIX AX88796 NE2000 clone support" + depends on (ARM || MIPS || SUPERH) + select PHYLIB + select MDIO_BITBANG + ---help--- + AX88796 driver, using platform bus to provide + chip detection and resources + +config AX88796_93CX6 + bool "ASIX AX88796 external 93CX6 eeprom support" + depends on AX88796 + select EEPROM_93CX6 + ---help--- + Select this if your platform comes with an external 93CX6 eeprom. + +config E2100 + tristate "Cabletron E21xx support" + depends on ISA + select CRC32 + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here. The module + will be called e2100. + +config ES3210 + tristate "Racal-Interlan EISA ES3210 support (EXPERIMENTAL)" + depends on PCI && EISA && EXPERIMENTAL + select CRC32 + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here. The module + will be called es3210. + +config HPLAN_PLUS + tristate "HP PCLAN+ (27247B and 27252A) support" + depends on ISA + select CRC32 + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here. The module + will be called hp-plus. + +config HPLAN + tristate "HP PCLAN (27245 and other 27xxx series) support" + depends on ISA + select CRC32 + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here. The module + will be called hp. + +config HYDRA + tristate "Hydra support" + depends on ZORRO + select CRC32 + ---help--- + If you have a Hydra Ethernet adapter, say Y. Otherwise, say N. + + To compile this driver as a module, choose M here: the module + will be called hydra. + +config ARM_ETHERH + tristate "I-cubed EtherH/ANT EtherM support" + depends on ARM && ARCH_ACORN + select CRC32 + ---help--- + If you have an Acorn system with one of these network cards, you + should say Y to this option if you wish to use it with Linux. + +config LNE390 + tristate "Mylex EISA LNE390A/B support (EXPERIMENTAL)" + depends on PCI && EISA && EXPERIMENTAL + select CRC32 + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here. The module + will be called lne390. + +config MAC8390 + bool "Macintosh NS 8390 based ethernet cards" + depends on MAC + select CRC32 + ---help--- + If you want to include a driver to support Nubus or LC-PDS + Ethernet cards using an NS8390 chipset or its equivalent, say Y + and read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + +config NE2000 + tristate "NE2000/NE1000 support" + depends on (ISA || (Q40 && m) || M32R || MACH_TX49XX) + select CRC32 + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. Many Ethernet cards + without a specific driver are compatible with NE2000. + + If you have a PCI NE2000 card however, say N here and Y to "PCI + NE2000 and clone support" under "EISA, VLB, PCI and on board + controllers" below. If you have a NE2000 card and are running on + an MCA system (a bus system used on some IBM PS/2 computers and + laptops), say N here and Y to "NE/2 (ne2000 MCA version) support", + below. + + To compile this driver as a module, choose M here. The module + will be called ne. + +config NE2_MCA + tristate "NE/2 (ne2000 MCA version) support" + depends on MCA_LEGACY + select CRC32 + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here. The module + will be called ne2. + +config NE2K_PCI + tristate "PCI NE2000 and clones support (see help)" + depends on PCI + select CRC32 + ---help--- + This driver is for NE2000 compatible PCI cards. It will not work + with ISA NE2000 cards (they have their own driver, "NE2000/NE1000 + support" below). If you have a PCI NE2000 network (Ethernet) card, + say Y and read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + This driver also works for the following NE2000 clone cards: + RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2 + NetVin NV5000SC Via 86C926 SureCom NE34 Winbond + Holtek HT80232 Holtek HT80229 + + To compile this driver as a module, choose M here. The module + will be called ne2k-pci. + +config APNE + tristate "PCMCIA NE2000 support" + depends on AMIGA_PCMCIA + select CRC32 + ---help--- + If you have a PCMCIA NE2000 compatible adapter, say Y. Otherwise, + say N. + + To compile this driver as a module, choose M here: the module + will be called apne. + +config NE3210 + tristate "Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)" + depends on PCI && EISA && EXPERIMENTAL + select CRC32 + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. Note that this driver + will NOT WORK for NE3200 cards as they are completely different. + + To compile this driver as a module, choose M here. The module + will be called ne3210. + +config PCMCIA_PCNET + tristate "NE2000 compatible PCMCIA support" + depends on PCMCIA + select CRC32 + ---help--- + Say Y here if you intend to attach an NE2000 compatible PCMCIA + (PC-card) Ethernet or Fast Ethernet card to your computer. + + To compile this driver as a module, choose M here: the module will be + called pcnet_cs. If unsure, say N. + +config NE_H8300 + tristate "NE2000 compatible support for H8/300" + depends on H8300 + ---help--- + Say Y here if you want to use the NE2000 compatible + controller on the Renesas H8/300 processor. + +config STNIC + tristate "National DP83902AV support" + depends on SUPERH + select CRC32 + ---help--- + Support for cards based on the National Semiconductor DP83902AV + ST-NIC Serial Network Interface Controller for Twisted Pair. This + is a 10Mbit/sec Ethernet controller. Product overview and specs at + <http://www.national.com/pf/DP/DP83902A.html>. + + If unsure, say N. + +config NET_VENDOR_SMC + bool "Western Digital/SMC cards" + depends on (ISA || MCA || EISA || MAC) + ---help--- + If you have a network (Ethernet) card belonging to this class, say Y + and read the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + Note that the answer to this question doesn't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about Western Digital cards. If you say Y, you will be + asked for your specific card in the following questions. + +config ULTRAMCA + tristate "SMC Ultra MCA support" + depends on NET_VENDOR_SMC && MCA + select CRC32 + ---help--- + If you have a network (Ethernet) card of this type and are running + an MCA based system (PS/2), say Y and read the Ethernet-HOWTO, + available from <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here. The module + will be called smc-mca. + +config ULTRA + tristate "SMC Ultra support" + depends on NET_VENDOR_SMC && ISA + select CRC32 + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + Important: There have been many reports that, with some motherboards + mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible, + such as some BusLogic models) causes corruption problems with many + operating systems. The Linux smc-ultra driver has a work-around for + this but keep it in mind if you have such a SCSI card and have + problems. + + To compile this driver as a module, choose M here. The module + will be called smc-ultra. + +config ULTRA32 + tristate "SMC Ultra32 EISA support" + depends on NET_VENDOR_SMC && EISA + select CRC32 + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here. The module + will be called smc-ultra32. + +config WD80x3 + tristate "WD80*3 support" + depends on NET_VENDOR_SMC && ISA + select CRC32 + ---help--- + If you have a network (Ethernet) card of this type, say Y and read + the Ethernet-HOWTO, available from + <http://www.tldp.org/docs.html#howto>. + + To compile this driver as a module, choose M here. The module + will be called wd. + +config ZORRO8390 + tristate "Zorro NS8390-based Ethernet support" + depends on ZORRO + select CRC32 + ---help--- + This driver is for Zorro Ethernet cards using an NS8390-compatible + chipset, like the Village Tronic Ariadne II and the Individual + Computers X-Surf Ethernet cards. If you have such a card, say Y. + Otherwise, say N. + + To compile this driver as a module, choose M here: the module + will be called zorro8390. + +endif # NET_VENDOR_8390 |