diff options
Diffstat (limited to 'drivers/net/ethernet/broadcom/bnx2.c')
-rw-r--r-- | drivers/net/ethernet/broadcom/bnx2.c | 317 |
1 files changed, 161 insertions, 156 deletions
diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c index 6a2de1d..e838a3f 100644 --- a/drivers/net/ethernet/broadcom/bnx2.c +++ b/drivers/net/ethernet/broadcom/bnx2.c @@ -1,6 +1,6 @@ /* bnx2.c: Broadcom NX2 network driver. * - * Copyright (c) 2004-2011 Broadcom Corporation + * Copyright (c) 2004-2013 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -58,8 +58,8 @@ #include "bnx2_fw.h" #define DRV_MODULE_NAME "bnx2" -#define DRV_MODULE_VERSION "2.2.3" -#define DRV_MODULE_RELDATE "June 27, 2012" +#define DRV_MODULE_VERSION "2.2.4" +#define DRV_MODULE_RELDATE "Aug 05, 2013" #define FW_MIPS_FILE_06 "bnx2/bnx2-mips-06-6.2.3.fw" #define FW_RV2P_FILE_06 "bnx2/bnx2-rv2p-06-6.0.15.fw" #define FW_MIPS_FILE_09 "bnx2/bnx2-mips-09-6.2.1b.fw" @@ -853,9 +853,8 @@ bnx2_alloc_mem(struct bnx2 *bp) bp->status_stats_size = status_blk_size + sizeof(struct statistics_block); - status_blk = dma_alloc_coherent(&bp->pdev->dev, bp->status_stats_size, - &bp->status_blk_mapping, - GFP_KERNEL | __GFP_ZERO); + status_blk = dma_zalloc_coherent(&bp->pdev->dev, bp->status_stats_size, + &bp->status_blk_mapping, GFP_KERNEL); if (status_blk == NULL) goto alloc_mem_err; @@ -3908,136 +3907,121 @@ init_cpu_err: return rc; } -static int -bnx2_set_power_state(struct bnx2 *bp, pci_power_t state) +static void +bnx2_setup_wol(struct bnx2 *bp) { - u16 pmcsr; + int i; + u32 val, wol_msg; - pci_read_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL, &pmcsr); + if (bp->wol) { + u32 advertising; + u8 autoneg; - switch (state) { - case PCI_D0: { - u32 val; + autoneg = bp->autoneg; + advertising = bp->advertising; - pci_write_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL, - (pmcsr & ~PCI_PM_CTRL_STATE_MASK) | - PCI_PM_CTRL_PME_STATUS); + if (bp->phy_port == PORT_TP) { + bp->autoneg = AUTONEG_SPEED; + bp->advertising = ADVERTISED_10baseT_Half | + ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full | + ADVERTISED_Autoneg; + } - if (pmcsr & PCI_PM_CTRL_STATE_MASK) - /* delay required during transition out of D3hot */ - msleep(20); + spin_lock_bh(&bp->phy_lock); + bnx2_setup_phy(bp, bp->phy_port); + spin_unlock_bh(&bp->phy_lock); - val = BNX2_RD(bp, BNX2_EMAC_MODE); - val |= BNX2_EMAC_MODE_MPKT_RCVD | BNX2_EMAC_MODE_ACPI_RCVD; - val &= ~BNX2_EMAC_MODE_MPKT; - BNX2_WR(bp, BNX2_EMAC_MODE, val); + bp->autoneg = autoneg; + bp->advertising = advertising; - val = BNX2_RD(bp, BNX2_RPM_CONFIG); - val &= ~BNX2_RPM_CONFIG_ACPI_ENA; - BNX2_WR(bp, BNX2_RPM_CONFIG, val); - break; - } - case PCI_D3hot: { - int i; - u32 val, wol_msg; - - if (bp->wol) { - u32 advertising; - u8 autoneg; - - autoneg = bp->autoneg; - advertising = bp->advertising; - - if (bp->phy_port == PORT_TP) { - bp->autoneg = AUTONEG_SPEED; - bp->advertising = ADVERTISED_10baseT_Half | - ADVERTISED_10baseT_Full | - ADVERTISED_100baseT_Half | - ADVERTISED_100baseT_Full | - ADVERTISED_Autoneg; - } + bnx2_set_mac_addr(bp, bp->dev->dev_addr, 0); - spin_lock_bh(&bp->phy_lock); - bnx2_setup_phy(bp, bp->phy_port); - spin_unlock_bh(&bp->phy_lock); + val = BNX2_RD(bp, BNX2_EMAC_MODE); - bp->autoneg = autoneg; - bp->advertising = advertising; + /* Enable port mode. */ + val &= ~BNX2_EMAC_MODE_PORT; + val |= BNX2_EMAC_MODE_MPKT_RCVD | + BNX2_EMAC_MODE_ACPI_RCVD | + BNX2_EMAC_MODE_MPKT; + if (bp->phy_port == PORT_TP) { + val |= BNX2_EMAC_MODE_PORT_MII; + } else { + val |= BNX2_EMAC_MODE_PORT_GMII; + if (bp->line_speed == SPEED_2500) + val |= BNX2_EMAC_MODE_25G_MODE; + } - bnx2_set_mac_addr(bp, bp->dev->dev_addr, 0); + BNX2_WR(bp, BNX2_EMAC_MODE, val); - val = BNX2_RD(bp, BNX2_EMAC_MODE); + /* receive all multicast */ + for (i = 0; i < NUM_MC_HASH_REGISTERS; i++) { + BNX2_WR(bp, BNX2_EMAC_MULTICAST_HASH0 + (i * 4), + 0xffffffff); + } + BNX2_WR(bp, BNX2_EMAC_RX_MODE, BNX2_EMAC_RX_MODE_SORT_MODE); - /* Enable port mode. */ - val &= ~BNX2_EMAC_MODE_PORT; - val |= BNX2_EMAC_MODE_MPKT_RCVD | - BNX2_EMAC_MODE_ACPI_RCVD | - BNX2_EMAC_MODE_MPKT; - if (bp->phy_port == PORT_TP) - val |= BNX2_EMAC_MODE_PORT_MII; - else { - val |= BNX2_EMAC_MODE_PORT_GMII; - if (bp->line_speed == SPEED_2500) - val |= BNX2_EMAC_MODE_25G_MODE; - } + val = 1 | BNX2_RPM_SORT_USER0_BC_EN | BNX2_RPM_SORT_USER0_MC_EN; + BNX2_WR(bp, BNX2_RPM_SORT_USER0, 0x0); + BNX2_WR(bp, BNX2_RPM_SORT_USER0, val); + BNX2_WR(bp, BNX2_RPM_SORT_USER0, val | BNX2_RPM_SORT_USER0_ENA); - BNX2_WR(bp, BNX2_EMAC_MODE, val); + /* Need to enable EMAC and RPM for WOL. */ + BNX2_WR(bp, BNX2_MISC_ENABLE_SET_BITS, + BNX2_MISC_ENABLE_SET_BITS_RX_PARSER_MAC_ENABLE | + BNX2_MISC_ENABLE_SET_BITS_TX_HEADER_Q_ENABLE | + BNX2_MISC_ENABLE_SET_BITS_EMAC_ENABLE); - /* receive all multicast */ - for (i = 0; i < NUM_MC_HASH_REGISTERS; i++) { - BNX2_WR(bp, BNX2_EMAC_MULTICAST_HASH0 + (i * 4), - 0xffffffff); - } - BNX2_WR(bp, BNX2_EMAC_RX_MODE, - BNX2_EMAC_RX_MODE_SORT_MODE); + val = BNX2_RD(bp, BNX2_RPM_CONFIG); + val &= ~BNX2_RPM_CONFIG_ACPI_ENA; + BNX2_WR(bp, BNX2_RPM_CONFIG, val); - val = 1 | BNX2_RPM_SORT_USER0_BC_EN | - BNX2_RPM_SORT_USER0_MC_EN; - BNX2_WR(bp, BNX2_RPM_SORT_USER0, 0x0); - BNX2_WR(bp, BNX2_RPM_SORT_USER0, val); - BNX2_WR(bp, BNX2_RPM_SORT_USER0, val | - BNX2_RPM_SORT_USER0_ENA); + wol_msg = BNX2_DRV_MSG_CODE_SUSPEND_WOL; + } else { + wol_msg = BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL; + } - /* Need to enable EMAC and RPM for WOL. */ - BNX2_WR(bp, BNX2_MISC_ENABLE_SET_BITS, - BNX2_MISC_ENABLE_SET_BITS_RX_PARSER_MAC_ENABLE | - BNX2_MISC_ENABLE_SET_BITS_TX_HEADER_Q_ENABLE | - BNX2_MISC_ENABLE_SET_BITS_EMAC_ENABLE); + if (!(bp->flags & BNX2_FLAG_NO_WOL)) + bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT3 | wol_msg, 1, 0); - val = BNX2_RD(bp, BNX2_RPM_CONFIG); - val &= ~BNX2_RPM_CONFIG_ACPI_ENA; - BNX2_WR(bp, BNX2_RPM_CONFIG, val); +} - wol_msg = BNX2_DRV_MSG_CODE_SUSPEND_WOL; - } - else { - wol_msg = BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL; - } +static int +bnx2_set_power_state(struct bnx2 *bp, pci_power_t state) +{ + switch (state) { + case PCI_D0: { + u32 val; + + pci_enable_wake(bp->pdev, PCI_D0, false); + pci_set_power_state(bp->pdev, PCI_D0); - if (!(bp->flags & BNX2_FLAG_NO_WOL)) - bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT3 | wol_msg, - 1, 0); + val = BNX2_RD(bp, BNX2_EMAC_MODE); + val |= BNX2_EMAC_MODE_MPKT_RCVD | BNX2_EMAC_MODE_ACPI_RCVD; + val &= ~BNX2_EMAC_MODE_MPKT; + BNX2_WR(bp, BNX2_EMAC_MODE, val); - pmcsr &= ~PCI_PM_CTRL_STATE_MASK; + val = BNX2_RD(bp, BNX2_RPM_CONFIG); + val &= ~BNX2_RPM_CONFIG_ACPI_ENA; + BNX2_WR(bp, BNX2_RPM_CONFIG, val); + break; + } + case PCI_D3hot: { + bnx2_setup_wol(bp); + pci_wake_from_d3(bp->pdev, bp->wol); if ((BNX2_CHIP_ID(bp) == BNX2_CHIP_ID_5706_A0) || (BNX2_CHIP_ID(bp) == BNX2_CHIP_ID_5706_A1)) { if (bp->wol) - pmcsr |= 3; - } - else { - pmcsr |= 3; - } - if (bp->wol) { - pmcsr |= PCI_PM_CTRL_PME_ENABLE; + pci_set_power_state(bp->pdev, PCI_D3hot); + } else { + pci_set_power_state(bp->pdev, PCI_D3hot); } - pci_write_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL, - pmcsr); /* No more memory access after this point until * device is brought back to D0. */ - udelay(50); break; } default: @@ -6317,7 +6301,6 @@ bnx2_open(struct net_device *dev) netif_carrier_off(dev); - bnx2_set_power_state(bp, PCI_D0); bnx2_disable_int(bp); rc = bnx2_setup_int_mode(bp, disable_msi); @@ -6724,7 +6707,6 @@ bnx2_close(struct net_device *dev) bnx2_del_napi(bp); bp->link_up = 0; netif_carrier_off(bp->dev); - bnx2_set_power_state(bp, PCI_D3hot); return 0; } @@ -7081,6 +7063,9 @@ bnx2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) else { bp->wol = 0; } + + device_set_wakeup_enable(&bp->pdev->dev, bp->wol); + return 0; } @@ -7156,9 +7141,6 @@ bnx2_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, struct bnx2 *bp = netdev_priv(dev); int rc; - if (!netif_running(dev)) - return -EAGAIN; - /* parameters already validated in ethtool_get_eeprom */ rc = bnx2_nvram_read(bp, eeprom->offset, eebuf, eeprom->len); @@ -7173,9 +7155,6 @@ bnx2_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, struct bnx2 *bp = netdev_priv(dev); int rc; - if (!netif_running(dev)) - return -EAGAIN; - /* parameters already validated in ethtool_set_eeprom */ rc = bnx2_nvram_write(bp, eeprom->offset, eebuf, eeprom->len); @@ -7535,8 +7514,6 @@ bnx2_self_test(struct net_device *dev, struct ethtool_test *etest, u64 *buf) { struct bnx2 *bp = netdev_priv(dev); - bnx2_set_power_state(bp, PCI_D0); - memset(buf, 0, sizeof(u64) * BNX2_NUM_TESTS); if (etest->flags & ETH_TEST_FL_OFFLINE) { int i; @@ -7585,8 +7562,6 @@ bnx2_self_test(struct net_device *dev, struct ethtool_test *etest, u64 *buf) etest->flags |= ETH_TEST_FL_FAILED; } - if (!netif_running(bp->dev)) - bnx2_set_power_state(bp, PCI_D3hot); } static void @@ -7658,8 +7633,6 @@ bnx2_set_phys_id(struct net_device *dev, enum ethtool_phys_id_state state) switch (state) { case ETHTOOL_ID_ACTIVE: - bnx2_set_power_state(bp, PCI_D0); - bp->leds_save = BNX2_RD(bp, BNX2_MISC_CFG); BNX2_WR(bp, BNX2_MISC_CFG, BNX2_MISC_CFG_LEDMODE_MAC); return 1; /* cycle on/off once per second */ @@ -7680,9 +7653,6 @@ bnx2_set_phys_id(struct net_device *dev, enum ethtool_phys_id_state state) case ETHTOOL_ID_INACTIVE: BNX2_WR(bp, BNX2_EMAC_LED, 0); BNX2_WR(bp, BNX2_MISC_CFG, bp->leds_save); - - if (!netif_running(dev)) - bnx2_set_power_state(bp, PCI_D3hot); break; } @@ -8130,8 +8100,6 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) goto err_out_release; } - bnx2_set_power_state(bp, PCI_D0); - /* Configure byte swap and enable write to the reg_window registers. * Rely on CPU to do target byte swapping on big endian systems * The chip's target access swapping will not swap all accesses @@ -8170,13 +8138,13 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) if (BNX2_CHIP(bp) == BNX2_CHIP_5709 && BNX2_CHIP_REV(bp) != BNX2_CHIP_REV_Ax) { - if (pci_find_capability(pdev, PCI_CAP_ID_MSIX)) + if (pdev->msix_cap) bp->flags |= BNX2_FLAG_MSIX_CAP; } if (BNX2_CHIP_ID(bp) != BNX2_CHIP_ID_5706_A0 && BNX2_CHIP_ID(bp) != BNX2_CHIP_ID_5706_A1) { - if (pci_find_capability(pdev, PCI_CAP_ID_MSI)) + if (pdev->msi_cap) bp->flags |= BNX2_FLAG_MSI_CAP; } @@ -8369,6 +8337,11 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) bp->wol = 0; } + if (bp->flags & BNX2_FLAG_NO_WOL) + device_set_wakeup_capable(&bp->pdev->dev, false); + else + device_set_wakeup_enable(&bp->pdev->dev, bp->wol); + if (BNX2_CHIP_ID(bp) == BNX2_CHIP_ID_5706_A0) { bp->tx_quick_cons_trip_int = bp->tx_quick_cons_trip; @@ -8609,46 +8582,52 @@ bnx2_remove_one(struct pci_dev *pdev) } static int -bnx2_suspend(struct pci_dev *pdev, pm_message_t state) +bnx2_suspend(struct device *device) { + struct pci_dev *pdev = to_pci_dev(device); struct net_device *dev = pci_get_drvdata(pdev); struct bnx2 *bp = netdev_priv(dev); - /* PCI register 4 needs to be saved whether netif_running() or not. - * MSI address and data need to be saved if using MSI and - * netif_running(). - */ - pci_save_state(pdev); - if (!netif_running(dev)) - return 0; - - cancel_work_sync(&bp->reset_task); - bnx2_netif_stop(bp, true); - netif_device_detach(dev); - del_timer_sync(&bp->timer); - bnx2_shutdown_chip(bp); - bnx2_free_skbs(bp); - bnx2_set_power_state(bp, pci_choose_state(pdev, state)); + if (netif_running(dev)) { + cancel_work_sync(&bp->reset_task); + bnx2_netif_stop(bp, true); + netif_device_detach(dev); + del_timer_sync(&bp->timer); + bnx2_shutdown_chip(bp); + __bnx2_free_irq(bp); + bnx2_free_skbs(bp); + } + bnx2_setup_wol(bp); return 0; } static int -bnx2_resume(struct pci_dev *pdev) +bnx2_resume(struct device *device) { + struct pci_dev *pdev = to_pci_dev(device); struct net_device *dev = pci_get_drvdata(pdev); struct bnx2 *bp = netdev_priv(dev); - pci_restore_state(pdev); if (!netif_running(dev)) return 0; bnx2_set_power_state(bp, PCI_D0); netif_device_attach(dev); + bnx2_request_irq(bp); bnx2_init_nic(bp, 1); bnx2_netif_start(bp, true); return 0; } +#ifdef CONFIG_PM_SLEEP +static SIMPLE_DEV_PM_OPS(bnx2_pm_ops, bnx2_suspend, bnx2_resume); +#define BNX2_PM_OPS (&bnx2_pm_ops) + +#else + +#define BNX2_PM_OPS NULL + +#endif /* CONFIG_PM_SLEEP */ /** * bnx2_io_error_detected - called when PCI error is detected * @pdev: Pointer to PCI device @@ -8694,24 +8673,28 @@ static pci_ers_result_t bnx2_io_slot_reset(struct pci_dev *pdev) { struct net_device *dev = pci_get_drvdata(pdev); struct bnx2 *bp = netdev_priv(dev); - pci_ers_result_t result; - int err; + pci_ers_result_t result = PCI_ERS_RESULT_DISCONNECT; + int err = 0; rtnl_lock(); if (pci_enable_device(pdev)) { dev_err(&pdev->dev, "Cannot re-enable PCI device after reset\n"); - result = PCI_ERS_RESULT_DISCONNECT; } else { pci_set_master(pdev); pci_restore_state(pdev); pci_save_state(pdev); - if (netif_running(dev)) { - bnx2_set_power_state(bp, PCI_D0); - bnx2_init_nic(bp, 1); - } - result = PCI_ERS_RESULT_RECOVERED; + if (netif_running(dev)) + err = bnx2_init_nic(bp, 1); + + if (!err) + result = PCI_ERS_RESULT_RECOVERED; + } + + if (result != PCI_ERS_RESULT_RECOVERED && netif_running(dev)) { + bnx2_napi_enable(bp); + dev_close(dev); } rtnl_unlock(); @@ -8748,6 +8731,28 @@ static void bnx2_io_resume(struct pci_dev *pdev) rtnl_unlock(); } +static void bnx2_shutdown(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct bnx2 *bp; + + if (!dev) + return; + + bp = netdev_priv(dev); + if (!bp) + return; + + rtnl_lock(); + if (netif_running(dev)) + dev_close(bp->dev); + + if (system_state == SYSTEM_POWER_OFF) + bnx2_set_power_state(bp, PCI_D3hot); + + rtnl_unlock(); +} + static const struct pci_error_handlers bnx2_err_handler = { .error_detected = bnx2_io_error_detected, .slot_reset = bnx2_io_slot_reset, @@ -8759,9 +8764,9 @@ static struct pci_driver bnx2_pci_driver = { .id_table = bnx2_pci_tbl, .probe = bnx2_init_one, .remove = bnx2_remove_one, - .suspend = bnx2_suspend, - .resume = bnx2_resume, + .driver.pm = BNX2_PM_OPS, .err_handler = &bnx2_err_handler, + .shutdown = bnx2_shutdown, }; module_pci_driver(bnx2_pci_driver); |