diff options
Diffstat (limited to 'drivers/net/ethernet/freescale/gianfar.c')
-rw-r--r-- | drivers/net/ethernet/freescale/gianfar.c | 51 |
1 files changed, 49 insertions, 2 deletions
diff --git a/drivers/net/ethernet/freescale/gianfar.c b/drivers/net/ethernet/freescale/gianfar.c index 3cb4647..b2c91dc 100644 --- a/drivers/net/ethernet/freescale/gianfar.c +++ b/drivers/net/ethernet/freescale/gianfar.c @@ -1016,7 +1016,14 @@ static int gfar_probe(struct platform_device *ofdev) /* We need to delay at least 3 TX clocks */ udelay(2); - tempval = (MACCFG1_TX_FLOW | MACCFG1_RX_FLOW); + tempval = 0; + if (!priv->pause_aneg_en && priv->tx_pause_en) + tempval |= MACCFG1_TX_FLOW; + if (!priv->pause_aneg_en && priv->rx_pause_en) + tempval |= MACCFG1_RX_FLOW; + /* the soft reset bit is not self-resetting, so we need to + * clear it before resuming normal operation + */ gfar_write(®s->maccfg1, tempval); /* Initialize MACCFG2. */ @@ -1460,7 +1467,7 @@ static int init_phy(struct net_device *dev) struct gfar_private *priv = netdev_priv(dev); uint gigabit_support = priv->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ? - SUPPORTED_1000baseT_Full : 0; + GFAR_SUPPORTED_GBIT : 0; phy_interface_t interface; priv->oldlink = 0; @@ -3023,6 +3030,41 @@ static irqreturn_t gfar_interrupt(int irq, void *grp_id) return IRQ_HANDLED; } +static u32 gfar_get_flowctrl_cfg(struct gfar_private *priv) +{ + struct phy_device *phydev = priv->phydev; + u32 val = 0; + + if (!phydev->duplex) + return val; + + if (!priv->pause_aneg_en) { + if (priv->tx_pause_en) + val |= MACCFG1_TX_FLOW; + if (priv->rx_pause_en) + val |= MACCFG1_RX_FLOW; + } else { + u16 lcl_adv, rmt_adv; + u8 flowctrl; + /* get link partner capabilities */ + rmt_adv = 0; + if (phydev->pause) + rmt_adv = LPA_PAUSE_CAP; + if (phydev->asym_pause) + rmt_adv |= LPA_PAUSE_ASYM; + + lcl_adv = mii_advertise_flowctrl(phydev->advertising); + + flowctrl = mii_resolve_flowctrl_fdx(lcl_adv, rmt_adv); + if (flowctrl & FLOW_CTRL_TX) + val |= MACCFG1_TX_FLOW; + if (flowctrl & FLOW_CTRL_RX) + val |= MACCFG1_RX_FLOW; + } + + return val; +} + /* Called every time the controller might need to be made * aware of new link state. The PHY code conveys this * information through variables in the phydev structure, and this @@ -3041,6 +3083,7 @@ static void adjust_link(struct net_device *dev) lock_tx_qs(priv); if (phydev->link) { + u32 tempval1 = gfar_read(®s->maccfg1); u32 tempval = gfar_read(®s->maccfg2); u32 ecntrl = gfar_read(®s->ecntrl); @@ -3089,6 +3132,10 @@ static void adjust_link(struct net_device *dev) priv->oldspeed = phydev->speed; } + tempval1 &= ~(MACCFG1_TX_FLOW | MACCFG1_RX_FLOW); + tempval1 |= gfar_get_flowctrl_cfg(priv); + + gfar_write(®s->maccfg1, tempval1); gfar_write(®s->maccfg2, tempval); gfar_write(®s->ecntrl, ecntrl); |