diff options
Diffstat (limited to 'drivers/net/ethernet/freescale/sdk_fman/inc/Peripherals/fm_macsec_ext.h')
| -rw-r--r-- | drivers/net/ethernet/freescale/sdk_fman/inc/Peripherals/fm_macsec_ext.h | 1271 |
1 files changed, 1271 insertions, 0 deletions
diff --git a/drivers/net/ethernet/freescale/sdk_fman/inc/Peripherals/fm_macsec_ext.h b/drivers/net/ethernet/freescale/sdk_fman/inc/Peripherals/fm_macsec_ext.h new file mode 100644 index 0000000..57925f1 --- /dev/null +++ b/drivers/net/ethernet/freescale/sdk_fman/inc/Peripherals/fm_macsec_ext.h @@ -0,0 +1,1271 @@ +/* + * Copyright 2008-2015 Freescale Semiconductor Inc. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/**************************************************************************//** + @File fm_macsec_ext.h + + @Description FM MACSEC ... +*//***************************************************************************/ +#ifndef __FM_MACSEC_EXT_H +#define __FM_MACSEC_EXT_H + +#include "std_ext.h" + + +/**************************************************************************//** + @Group FM_grp Frame Manager API + + @Description FM API functions, definitions and enums + + @{ +*//***************************************************************************/ + +/**************************************************************************//** + @Group FM_MACSEC_grp FM MACSEC + + @Description FM MACSEC API functions, definitions and enums + + @{ +*//***************************************************************************/ + +/**************************************************************************//** + @Description MACSEC Exceptions +*//***************************************************************************/ +typedef enum e_FmMacsecExceptions { + e_FM_MACSEC_EX_SINGLE_BIT_ECC, /**< Single bit ECC error */ + e_FM_MACSEC_EX_MULTI_BIT_ECC /**< Multi bit ECC error */ +} e_FmMacsecExceptions; + + +/**************************************************************************//** + @Group FM_MACSEC_init_grp FM-MACSEC Initialization Unit + + @Description FM MACSEC Initialization Unit + + @{ +*//***************************************************************************/ + +/**************************************************************************//** + @Function t_FmMacsecExceptionsCallback + + @Description Exceptions user callback routine, will be called upon an + exception passing the exception identification. + + @Param[in] h_App A handle to an application layer object; This handle + will be passed by the driver upon calling this callback. + @Param[in] exception The exception. +*//***************************************************************************/ +typedef void (t_FmMacsecExceptionsCallback) ( t_Handle h_App, + e_FmMacsecExceptions exception); + + +/**************************************************************************//** + @Description FM MACSEC config input +*//***************************************************************************/ +typedef struct t_FmMacsecParams { + t_Handle h_Fm; /**< A handle to the FM object related to */ + bool guestMode; /**< Partition-id */ + union { + struct { + uint8_t fmMacId; /**< FM MAC id */ + } guestParams; + + struct { + uintptr_t baseAddr; /**< Base of memory mapped FM MACSEC registers */ + t_Handle h_FmMac; /**< A handle to the FM MAC object related to */ + t_FmMacsecExceptionsCallback *f_Exception; /**< Exception Callback Routine */ + t_Handle h_App; /**< A handle to an application layer object; This handle will + be passed by the driver upon calling the above callbacks */ + } nonGuestParams; + }; +} t_FmMacsecParams; + +/**************************************************************************//** + @Function FM_MACSEC_Config + + @Description Creates descriptor for the FM MACSEC module; + + The routine returns a handle (descriptor) to the FM MACSEC object; + This descriptor must be passed as first parameter to all other + FM MACSEC function calls; + + No actual initialization or configuration of FM MACSEC hardware is + done by this routine. + + @Param[in] p_FmMacsecParam Pointer to data structure of parameters. + + @Retval Handle to FM MACSEC object, or NULL for Failure. +*//***************************************************************************/ +t_Handle FM_MACSEC_Config(t_FmMacsecParams *p_FmMacsecParam); + +/**************************************************************************//** + @Function FM_MACSEC_Init + + @Description Initializes the FM MACSEC module. + + @Param[in] h_FmMacsec FM MACSEC module descriptor. + + @Return E_OK on success; Error code otherwise. +*//***************************************************************************/ +t_Error FM_MACSEC_Init(t_Handle h_FmMacsec); + +/**************************************************************************//** + @Function FM_MACSEC_Free + + @Description Frees all resources that were assigned to FM MACSEC module; + + Calling this routine invalidates the descriptor. + + @Param[in] h_FmMacsec FM MACSEC module descriptor. + + @Return E_OK on success; Error code otherwise. +*//***************************************************************************/ +t_Error FM_MACSEC_Free(t_Handle h_FmMacsec); + + +/**************************************************************************//** + @Group FM_MACSEC_advanced_init_grp FM-MACSEC Advanced Configuration Unit + + @Description Configuration functions used to change default values. + + @{ +*//***************************************************************************/ + +/**************************************************************************//** + @Description enum for unknown sci frame treatment +*//***************************************************************************/ +typedef enum e_FmMacsecUnknownSciFrameTreatment { + e_FM_MACSEC_UNKNOWN_SCI_FRAME_TREATMENT_DISCARD_BOTH = 0, /**< Controlled port - Strict mode */ + e_FM_MACSEC_UNKNOWN_SCI_FRAME_TREATMENT_DISCARD_UNCONTROLLED_DELIVER_OR_DISCARD_CONTROLLED, /**< If C bit clear deliver on controlled port, else discard + Controlled port - Check or Disable mode */ + e_FM_MACSEC_UNKNOWN_SCI_FRAME_TREATMENT_DELIVER_UNCONTROLLED_DISCARD_CONTROLLED, /**< Controlled port - Strict mode */ + e_FM_MACSEC_UNKNOWN_SCI_FRAME_TREATMENT_DELIVER_OR_DISCARD_UNCONTROLLED_DELIVER_OR_DISCARD_CONTROLLED /**< If C bit set deliver on uncontrolled port and discard on controlled port, + else discard on uncontrolled port and deliver on controlled port + Controlled port - Check or Disable mode */ +} e_FmMacsecUnknownSciFrameTreatment; + +/**************************************************************************//** + @Description enum for untag frame treatment +*//***************************************************************************/ +typedef enum e_FmMacsecUntagFrameTreatment { + e_FM_MACSEC_UNTAG_FRAME_TREATMENT_DELIVER_UNCONTROLLED_DISCARD_CONTROLLED = 0, /**< Controlled port - Strict mode */ + e_FM_MACSEC_UNTAG_FRAME_TREATMENT_DISCARD_BOTH, /**< Controlled port - Strict mode */ + e_FM_MACSEC_UNTAG_FRAME_TREATMENT_DISCARD_UNCONTROLLED_DELIVER_CONTROLLED_UNMODIFIED /**< Controlled port - Strict mode */ +} e_FmMacsecUntagFrameTreatment; + +/**************************************************************************//** + @Function FM_MACSEC_ConfigUnknownSciFrameTreatment + + @Description Change the treatment for received frames with unknown sci from its default + configuration [DEFAULT_unknownSciFrameTreatment]. + + @Param[in] h_FmMacsec FM MACSEC module descriptor. + @Param[in] treatMode The selected mode. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_Config() and before FM_MACSEC_Init(). +*//***************************************************************************/ +t_Error FM_MACSEC_ConfigUnknownSciFrameTreatment(t_Handle h_FmMacsec, e_FmMacsecUnknownSciFrameTreatment treatMode); + +/**************************************************************************//** + @Function FM_MACSEC_ConfigInvalidTagsFrameTreatment + + @Description Change the treatment for received frames with invalid tags or + a zero value PN or an invalid ICV from its default configuration + [DEFAULT_invalidTagsFrameTreatment]. + + @Param[in] h_FmMacsec FM MACSEC module descriptor. + @Param[in] deliverUncontrolled If True deliver on the uncontrolled port, else discard; + In both cases discard on the controlled port; + this provide Strict, Check or Disable mode. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_Config() and before FM_MACSEC_Init(). +*//***************************************************************************/ +t_Error FM_MACSEC_ConfigInvalidTagsFrameTreatment(t_Handle h_FmMacsec, bool deliverUncontrolled); + +/**************************************************************************//** + @Function FM_MACSEC_ConfigEncryptWithNoChangedTextFrameTreatment + + @Description Change the treatment for received frames with the Encryption bit + set and the Changed Text bit clear from its default configuration + [DEFAULT_encryptWithNoChangedTextFrameTreatment]. + + @Param[in] h_FmMacsec FM MACSEC module descriptor. + @Param[in] discardUncontrolled If True discard on the uncontrolled port, else deliver; + In both cases discard on the controlled port; + this provide Strict, Check or Disable mode. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_Config() and before FM_MACSEC_Init(). +*//***************************************************************************/ +t_Error FM_MACSEC_ConfigEncryptWithNoChangedTextFrameTreatment(t_Handle h_FmMacsec, bool discardUncontrolled); + +/**************************************************************************//** + @Function FM_MACSEC_ConfigChangedTextWithNoEncryptFrameTreatment + + @Description Change the treatment for received frames with the Encryption bit + clear and the Changed Text bit set from its default configuration + [DEFAULT_changedTextWithNoEncryptFrameTreatment]. + + @Param[in] h_FmMacsec FM MACSEC module descriptor. + @Param[in] deliverUncontrolled If True deliver on the uncontrolled port, else discard; + In both cases discard on the controlled port; + this provide Strict, Check or Disable mode. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_Config() and before FM_MACSEC_Init(). +*//***************************************************************************/ +t_Error FM_MACSEC_ConfigChangedTextWithNoEncryptFrameTreatment(t_Handle h_FmMacsec, bool deliverUncontrolled); + +/**************************************************************************//** + @Function FM_MACSEC_ConfigUntagFrameTreatment + + @Description Change the treatment for received frames without the MAC security tag (SecTAG) + from its default configuration [DEFAULT_untagFrameTreatment]. + + @Param[in] h_FmMacsec FM MACSEC module descriptor. + @Param[in] treatMode The selected mode. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_Config() and before FM_MACSEC_Init(). +*//***************************************************************************/ +t_Error FM_MACSEC_ConfigUntagFrameTreatment(t_Handle h_FmMacsec, e_FmMacsecUntagFrameTreatment treatMode); + +/**************************************************************************//** + @Function FM_MACSEC_ConfigOnlyScbIsSetFrameTreatment + + @Description Change the treatment for received frames with only SCB bit set + from its default configuration [DEFAULT_onlyScbIsSetFrameTreatment]. + + @Param[in] h_FmMacsec FM MACSEC module descriptor. + @Param[in] deliverUncontrolled If True deliver on the uncontrolled port, else discard; + In both cases discard on the controlled port; + this provide Strict, Check or Disable mode. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_Config() and before FM_MACSEC_Init(). +*//***************************************************************************/ +t_Error FM_MACSEC_ConfigOnlyScbIsSetFrameTreatment(t_Handle h_FmMacsec, bool deliverUncontrolled); + +/**************************************************************************//** + @Function FM_MACSEC_ConfigPnExhaustionThreshold + + @Description It's provide the ability to configure a PN exhaustion threshold; + When the NextPn crosses this value an interrupt event + is asserted to warn that the active SA should re-key. + + @Param[in] h_FmMacsec FM MACSEC module descriptor. + @Param[in] pnExhThr If the threshold is reached, an interrupt event + is asserted to re-key. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_Config() and before FM_MACSEC_Init(). +*//***************************************************************************/ +t_Error FM_MACSEC_ConfigPnExhaustionThreshold(t_Handle h_FmMacsec, uint32_t pnExhThr); + +/**************************************************************************//** + @Function FM_MACSEC_ConfigKeysUnreadable + + @Description Turn on privacy mode; All the keys and their hash values can't be read any more; + Can not be cleared unless hard reset. + + @Param[in] h_FmMacsec FM MACSEC module descriptor. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_Config() and before FM_MACSEC_Init(). +*//***************************************************************************/ +t_Error FM_MACSEC_ConfigKeysUnreadable(t_Handle h_FmMacsec); + +/**************************************************************************//** + @Function FM_MACSEC_ConfigSectagWithoutSCI + + @Description Promise that all generated Sectag will be without SCI included. + + @Param[in] h_FmMacsec FM MACSEC module descriptor. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_Config() and before FM_MACSEC_Init(). +*//***************************************************************************/ +t_Error FM_MACSEC_ConfigSectagWithoutSCI(t_Handle h_FmMacsec); + +/**************************************************************************//** + @Function FM_MACSEC_ConfigException + + @Description Calling this routine changes the internal driver data base + from its default selection of exceptions enablement; + By default all exceptions are enabled. + + @Param[in] h_FmMacsec FM MACSEC module descriptor. + @Param[in] exception The exception to be selected. + @Param[in] enable TRUE to enable interrupt, FALSE to mask it. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_Config() and before FM_MACSEC_Init(). +*//***************************************************************************/ +t_Error FM_MACSEC_ConfigException(t_Handle h_FmMacsec, e_FmMacsecExceptions exception, bool enable); + +/** @} */ /* end of FM_MACSEC_advanced_init_grp group */ +/** @} */ /* end of FM_MACSEC_init_grp group */ + + +/**************************************************************************//** + @Group FM_MACSEC_runtime_control_grp FM-MACSEC Runtime Control Data Unit + + @Description FM MACSEC runtime control data unit API functions, definitions and enums. + + @{ +*//***************************************************************************/ + +/**************************************************************************//** + @Function FM_MACSEC_GetRevision + + @Description Return MACSEC HW chip revision + + @Param[in] h_FmMacsec FM MACSEC module descriptor. + @Param[out] p_MacsecRevision MACSEC revision as defined by the chip. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only after FM_MACSEC_Init(). +*//***************************************************************************/ +t_Error FM_MACSEC_GetRevision(t_Handle h_FmMacsec, uint32_t *p_MacsecRevision); + +/**************************************************************************//** + @Function FM_MACSEC_Enable + + @Description This routine should be called after MACSEC is initialized for enabling all + MACSEC engines according to their existing configuration. + + @Param[in] h_FmMacsec FM MACSEC module descriptor. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_Init() and when MACSEC is disabled. +*//***************************************************************************/ +t_Error FM_MACSEC_Enable(t_Handle h_FmMacsec); + +/**************************************************************************//** + @Function FM_MACSEC_Disable + + @Description This routine may be called when MACSEC is enabled in order to + disable all MACSEC engines; The MACSEC is working in bypass mode. + + @Param[in] h_FmMacsec FM MACSEC module descriptor. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_Init() and when MACSEC is enabled. +*//***************************************************************************/ +t_Error FM_MACSEC_Disable(t_Handle h_FmMacsec); + +/**************************************************************************//** + @Function FM_MACSEC_SetException + + @Description Calling this routine enables/disables the specified exception. + + @Param[in] h_FmMacsec FM MACSEC module descriptor. + @Param[in] exception The exception to be selected. + @Param[in] enable TRUE to enable interrupt, FALSE to mask it. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_Init(). +*//***************************************************************************/ +t_Error FM_MACSEC_SetException(t_Handle h_FmMacsec, e_FmMacsecExceptions exception, bool enable); + +#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0)) +/**************************************************************************//** + @Function FM_MACSEC_DumpRegs + + @Description Dump internal registers. + + @Param[in] h_FmMacsec - FM MACSEC module descriptor. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only after FM_MACSEC_Init(). +*//***************************************************************************/ +t_Error FM_MACSEC_DumpRegs(t_Handle h_FmMacsec); +#endif /* (defined(DEBUG_ERRORS) && ... */ + +#ifdef VERIFICATION_SUPPORT +/********************* VERIFICATION ONLY ********************************/ +/**************************************************************************//** + @Function FM_MACSEC_BackdoorSet + + @Description Set register of the MACSEC memory map + + @Param[in] h_FmMacsec FM MACSEC module descriptor. + @Param[out] offset Register offset. + @Param[out] value Value to write. + + + @Return None + + @Cautions Allowed only following FM_MACSEC_Init(). +*//***************************************************************************/ +t_Error FM_MACSEC_BackdoorSet(t_Handle h_FmMacsec, uint32_t offset, uint32_t value); + +/**************************************************************************//** + @Function FM_MACSEC_BackdoorGet + + @Description Read from register of the MACSEC memory map. + + @Param[in] h_FmMacsec FM MACSEC module descriptor. + @Param[out] offset Register offset. + + @Return Value read + + @Cautions Allowed only following FM_MACSEC_Init(). +*//***************************************************************************/ +uint32_t FM_MACSEC_BackdoorGet(t_Handle h_FmMacsec, uint32_t offset); +#endif /* VERIFICATION_SUPPORT */ + +/** @} */ /* end of FM_MACSEC_runtime_control_grp group */ + + +/**************************************************************************//** + @Group FM_MACSEC_SECY_grp FM-MACSEC SecY + + @Description FM-MACSEC SecY API functions, definitions and enums + + @{ +*//***************************************************************************/ + +typedef uint8_t macsecSAKey_t[32]; +typedef uint64_t macsecSCI_t; +typedef uint8_t macsecAN_t; + +/**************************************************************************//** +@Description MACSEC SECY Cipher Suite +*//***************************************************************************/ +typedef enum e_FmMacsecSecYCipherSuite { + e_FM_MACSEC_SECY_GCM_AES_128 = 0, /**< GCM-AES-128 */ +#if (DPAA_VERSION >= 11) + e_FM_MACSEC_SECY_GCM_AES_256 /**< GCM-AES-256 */ +#endif /* (DPAA_VERSION >= 11) */ +} e_FmMacsecSecYCipherSuite; + +/**************************************************************************//** + @Description MACSEC SECY Exceptions +*//***************************************************************************/ +typedef enum e_FmMacsecSecYExceptions { + e_FM_MACSEC_SECY_EX_FRAME_DISCARDED /**< Frame Discarded */ +} e_FmMacsecSecYExceptions; + +/**************************************************************************//** + @Description MACSEC SECY Events +*//***************************************************************************/ +typedef enum e_FmMacsecSecYEvents { + e_FM_MACSEC_SECY_EV_NEXT_PN /**< Next Packet Number exhaustion threshold reached */ +} e_FmMacsecSecYEvents; + +/**************************************************************************//** + @Collection MACSEC SECY Frame Discarded Descriptor error +*//***************************************************************************/ +typedef uint8_t macsecTxScFrameDiscardedErrSelect_t; /**< typedef for defining Frame Discarded Descriptor errors */ + +#define FM_MACSEC_SECY_TX_SC_FRM_DISCAR_ERR_NEXT_PN_ZERO 0x8000 /**< NextPn == 0 */ +#define FM_MACSEC_SECY_TX_SC_FRM_DISCAR_ERR_SC_DISBALE 0x4000 /**< SC is disable */ +/* @} */ + +/**************************************************************************//** + @Function t_FmMacsecSecYExceptionsCallback + + @Description Exceptions user callback routine, will be called upon an + exception passing the exception identification. + + @Param[in] h_App A handle to an application layer object; This handle + will be passed by the driver upon calling this callback. + @Param[in] exception The exception. +*//***************************************************************************/ +typedef void (t_FmMacsecSecYExceptionsCallback) ( t_Handle h_App, + e_FmMacsecSecYExceptions exception); + +/**************************************************************************//** + @Function t_FmMacsecSecYEventsCallback + + @Description Events user callback routine, will be called upon an + event passing the event identification. + + @Param[in] h_App A handle to an application layer object; This handle + will be passed by the driver upon calling this callback. + @Param[in] event The event. +*//***************************************************************************/ +typedef void (t_FmMacsecSecYEventsCallback) ( t_Handle h_App, + e_FmMacsecSecYEvents event); + +/**************************************************************************//** + @Description RFC2863 MIB +*//***************************************************************************/ +typedef struct t_MIBStatistics { + uint64_t ifInOctets; /**< Total number of byte received */ + uint64_t ifInPkts; /**< Total number of packets received */ + uint64_t ifInMcastPkts; /**< Total number of multicast frame received */ + uint64_t ifInBcastPkts; /**< Total number of broadcast frame received */ + uint64_t ifInDiscards; /**< Frames received, but discarded due to problems within the MAC RX : + - InPktsNoTag, + - InPktsLate, + - InPktsOverrun */ + uint64_t ifInErrors; /**< Number of frames received with error: + - InPktsBadTag, + - InPktsNoSCI, + - InPktsNotUsingSA + - InPktsNotValid */ + uint64_t ifOutOctets; /**< Total number of byte sent */ + uint64_t ifOutPkts; /**< Total number of packets sent */ + uint64_t ifOutMcastPkts; /**< Total number of multicast frame sent */ + uint64_t ifOutBcastPkts; /**< Total number of multicast frame sent */ + uint64_t ifOutDiscards; /**< Frames received, but discarded due to problems within the MAC TX N/A! */ + uint64_t ifOutErrors; /**< Number of frames transmitted with error: + - FIFO Overflow Error + - FIFO Underflow Error + - Other */ +} t_MIBStatistics; + +/**************************************************************************//** + @Description MACSEC SecY Rx SA Statistics +*//***************************************************************************/ +typedef struct t_FmMacsecSecYRxSaStatistics { + uint32_t inPktsOK; /**< The number of frames with resolved SCI, have passed all + frame validation frame validation with the validateFrame not set to disable */ + uint32_t inPktsInvalid; /**< The number of frames with resolved SCI, that have failed frame + validation with the validateFrame set to check */ + uint32_t inPktsNotValid; /**< The number of frames with resolved SCI, discarded on the controlled port, + that have failed frame validation with the validateFrame set to strict or the c bit is set */ + uint32_t inPktsNotUsingSA; /**< The number of frames received with resolved SCI and discarded on disabled or + not provisioned SA with validateFrame in the strict mode or the C bit is set */ + uint32_t inPktsUnusedSA; /**< The number of frames received with resolved SCI on disabled or not provisioned SA + with validateFrame not in the strict mode and the C bit is cleared */ +} t_FmMacsecSecYRxSaStatistics; + +/**************************************************************************//** + @Description MACSEC SecY Tx SA Statistics +*//***************************************************************************/ +typedef struct t_FmMacsecSecYTxSaStatistics { + uint64_t outPktsProtected; /**< The number of frames, that the user of the controlled port requested to + be transmitted, which were integrity protected */ + uint64_t outPktsEncrypted; /**< The number of frames, that the user of the controlled port requested to + be transmitted, which were confidentiality protected */ +} t_FmMacsecSecYTxSaStatistics; + +/**************************************************************************//** + @Description MACSEC SecY Rx SC Statistics +*//***************************************************************************/ +typedef struct t_FmMacsecSecYRxScStatistics { + uint64_t inPktsUnchecked; /**< The number of frames with resolved SCI, delivered to the user of a controlled port, + that are not validated with the validateFrame set to disable */ + uint64_t inPktsDelayed; /**< The number of frames with resolved SCI, delivered to the user of a controlled port, + that have their PN smaller than the lowest_PN with the validateFrame set to + disable or replayProtect disabled */ + uint64_t inPktsLate; /**< The number of frames with resolved SCI, discarded on the controlled port, + that have their PN smaller than the lowest_PN with the validateFrame set to + Check or Strict and replayProtect enabled */ + uint64_t inPktsOK; /**< The number of frames with resolved SCI, have passed all + frame validation frame validation with the validateFrame not set to disable */ + uint64_t inPktsInvalid; /**< The number of frames with resolved SCI, that have failed frame + validation with the validateFrame set to check */ + uint64_t inPktsNotValid; /**< The number of frames with resolved SCI, discarded on the controlled port, + that have failed frame validation with the validateFrame set to strict or the c bit is set */ + uint64_t inPktsNotUsingSA; /**< The number of frames received with resolved SCI and discarded on disabled or + not provisioned SA with validateFrame in the strict mode or the C bit is set */ + uint64_t inPktsUnusedSA; /**< The number of frames received with resolved SCI on disabled or not provisioned SA + with validateFrame not in the strict mode and the C bit is cleared */ +} t_FmMacsecSecYRxScStatistics; + +/**************************************************************************//** + @Description MACSEC SecY Tx SC Statistics +*//***************************************************************************/ +typedef struct t_FmMacsecSecYTxScStatistics { + uint64_t outPktsProtected; /**< The number of frames, that the user of the controlled port requested to + be transmitted, which were integrity protected */ + uint64_t outPktsEncrypted; /**< The number of frames, that the user of the controlled port requested to + be transmitted, which were confidentiality protected */ +} t_FmMacsecSecYTxScStatistics; + +/**************************************************************************//** + @Description MACSEC SecY Statistics +*//***************************************************************************/ +typedef struct t_FmMacsecSecYStatistics { + t_MIBStatistics mibCtrlStatistics; /**< Controlled port MIB statistics */ + t_MIBStatistics mibNonCtrlStatistics; /**< Uncontrolled port MIB statistics */ +/* Frame verification statistics */ + uint64_t inPktsUntagged; /**< The number of received packets without the MAC security tag + (SecTAG) with validateFrames which is not in the strict mode */ + uint64_t inPktsNoTag; /**< The number of received packets discarded without the + MAC security tag (SecTAG) with validateFrames which is in the strict mode */ + uint64_t inPktsBadTag; /**< The number of received packets discarded with an invalid + SecTAG or a zero value PN or an invalid ICV */ + uint64_t inPktsUnknownSCI; /**< The number of received packets with unknown SCI with the + condition : validateFrames is not in the strict mode and the + C bit in the SecTAG is not set */ + uint64_t inPktsNoSCI; /**< The number of received packets discarded with unknown SCI + information with the condition : validateFrames is in the strict mode + or the C bit in the SecTAG is set */ + uint64_t inPktsOverrun; /**< The number of packets discarded because the number of + received packets exceeded the cryptographic performance capabilities */ +/* Frame validation statistics */ + uint64_t inOctetsValidated; /**< The number of octets of plaintext recovered from received frames with + resolved SCI that were integrity protected but not encrypted */ + uint64_t inOctetsDecrypted; /**< The number of octets of plaintext recovered from received frames with + resolved SCI that were integrity protected and encrypted */ +/* Frame generation statistics */ + uint64_t outPktsUntagged; /**< The number of frames, that the user of the controlled port requested to + be transmitted, with protectFrame false */ + uint64_t outPktsTooLong; /**< The number of frames, that the user of the controlled port requested to + be transmitted, discarded due to length being larger than Maximum Frame Length (MACSEC_MFL) */ +/* Frame protection statistics */ + uint64_t outOctetsProtected; /**< The number of octets of User Data in transmitted frames that were + integrity protected but not encrypted */ + uint64_t outOctetsEncrypted; /**< The number of octets of User Data in transmitted frames that were + both integrity protected and encrypted */ +} t_FmMacsecSecYStatistics; + + +/**************************************************************************//** + @Description MACSEC SecY SC Params +*//***************************************************************************/ +typedef struct t_FmMacsecSecYSCParams { + macsecSCI_t sci; /**< The secure channel identification of the SC */ + e_FmMacsecSecYCipherSuite cipherSuite; /**< Cipher suite to be used for the SC */ +} t_FmMacsecSecYSCParams; + +/**************************************************************************//** + @Group FM_MACSEC_SECY_init_grp FM-MACSEC SecY Initialization Unit + + @Description FM-MACSEC SecY Initialization Unit + + @{ +*//***************************************************************************/ + +/**************************************************************************//** + @Description enum for validate frames +*//***************************************************************************/ +typedef enum e_FmMacsecValidFrameBehavior { + e_FM_MACSEC_VALID_FRAME_BEHAVIOR_DISABLE = 0, /**< disable the validation function */ + e_FM_MACSEC_VALID_FRAME_BEHAVIOR_CHECK, /**< enable the validation function but only for checking + without filtering out invalid frames */ + e_FM_MACSEC_VALID_FRAME_BEHAVIOR_STRICT /**< enable the validation function and also strictly filter + out those invalid frames */ +} e_FmMacsecValidFrameBehavior; + +/**************************************************************************//** + @Description enum for sci insertion +*//***************************************************************************/ +typedef enum e_FmMacsecSciInsertionMode { + e_FM_MACSEC_SCI_INSERTION_MODE_EXPLICIT_SECTAG = 0, /**< explicit sci in the sectag */ + e_FM_MACSEC_SCI_INSERTION_MODE_EXPLICIT_MAC_SA, /**< mac sa is overwritten with the sci*/ + e_FM_MACSEC_SCI_INSERTION_MODE_IMPLICT_PTP /**< implicit point-to-point sci (pre-shared) */ +} e_FmMacsecSciInsertionMode; + +/**************************************************************************//** + @Description FM MACSEC SecY config input +*//***************************************************************************/ +typedef struct t_FmMacsecSecYParams { + t_Handle h_FmMacsec; /**< A handle to the FM MACSEC object */ + t_FmMacsecSecYSCParams txScParams; /**< Tx SC Params */ + uint32_t numReceiveChannels; /**< Number of receive channels dedicated to this SecY */ + t_FmMacsecSecYExceptionsCallback *f_Exception; /**< Callback routine to be called by the driver upon SecY exception */ + t_FmMacsecSecYEventsCallback *f_Event; /**< Callback routine to be called by the driver upon SecY event */ + t_Handle h_App; /**< A handle to an application layer object; This handle will + be passed by the driver upon calling the above callbacks */ +} t_FmMacsecSecYParams; + +/**************************************************************************//** + @Function FM_MACSEC_SECY_Config + + @Description Creates descriptor for the FM MACSEC SECY module; + + The routine returns a handle (descriptor) to the FM MACSEC SECY object; + This descriptor must be passed as first parameter to all other + FM MACSEC SECY function calls; + No actual initialization or configuration of FM MACSEC SecY hardware is + done by this routine. + + @Param[in] p_FmMacsecSecYParam Pointer to data structure of parameters. + + @Return Handle to FM MACSEC SECY object, or NULL for Failure. +*//***************************************************************************/ +t_Handle FM_MACSEC_SECY_Config(t_FmMacsecSecYParams *p_FmMacsecSecYParam); + +/**************************************************************************//** + @Function FM_MACSEC_SECY_Init + + @Description Initializes the FM MACSEC SECY module. + + @Param[in] h_FmMacsecSecY FM MACSEC SECY module descriptor. + + @Return E_OK on success; Error code otherwise. +*//***************************************************************************/ +t_Error FM_MACSEC_SECY_Init(t_Handle h_FmMacsecSecY); + +/**************************************************************************//** + @Function FM_MACSEC_SECY_Free + + @Description Frees all resources that were assigned to FM MACSEC SECY module. + + Calling this routine invalidates the descriptor. + + @Param[in] h_FmMacsecSecY FM MACSEC SECY module descriptor. + + @Return E_OK on success; Error code otherwise. +*//***************************************************************************/ +t_Error FM_MACSEC_SECY_Free(t_Handle h_FmMacsecSecY); + +/**************************************************************************//** + @Group FM_MACSEC_SECY_advanced_init_grp FM-MACSEC SecY Advanced Configuration Unit + + @Description Configuration functions used to change default values. + + @{ +*//***************************************************************************/ + +/**************************************************************************//** + @Function FM_MACSEC_SECY_ConfigSciInsertionMode + + @Description Calling this routine changes the SCI-insertion-mode in the + internal driver data base from its default configuration + [DEFAULT_sciInsertionMode] + + @Param[in] h_FmMacsecSecY FM MACSEC SECY module descriptor. + @Param[in] sciInsertionMode Sci insertion mode + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_SECY_Config() and before FM_MACSEC_SECY_Init(); + +*//***************************************************************************/ +t_Error FM_MACSEC_SECY_ConfigSciInsertionMode(t_Handle h_FmMacsecSecY, e_FmMacsecSciInsertionMode sciInsertionMode); + +/**************************************************************************//** + @Function FM_MACSEC_SECY_ConfigProtectFrames + + @Description Calling this routine changes the protect-frame mode in the + internal driver data base from its default configuration + [DEFAULT_protectFrames] + + @Param[in] h_FmMacsecSecY FM MACSEC SECY module descriptor. + @Param[in] protectFrames If FALSE, frames are transmitted without modification + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_SECY_Config() and before FM_MACSEC_SECY_Init(); + +*//***************************************************************************/ +t_Error FM_MACSEC_SECY_ConfigProtectFrames(t_Handle h_FmMacsecSecY, bool protectFrames); + +/**************************************************************************//** + @Function FM_MACSEC_SECY_ConfigReplayWindow + + @Description Calling this routine changes the replay-window settings in the + internal driver data base from its default configuration + [DEFAULT_replayEnable], [DEFAULT_replayWindow] + + @Param[in] h_FmMacsecSecY FM MACSEC SECY module descriptor. + @Param[in] replayProtect; Replay protection function mode + @Param[in] replayWindow; The size of the replay window + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_SECY_Config() and before FM_MACSEC_SECY_Init(); + +*//***************************************************************************/ +t_Error FM_MACSEC_SECY_ConfigReplayWindow(t_Handle h_FmMacsecSecY, bool replayProtect, uint32_t replayWindow); + +/**************************************************************************//** + @Function FM_MACSEC_SECY_ConfigValidationMode + + @Description Calling this routine changes the frame-validation-behavior mode + in the internal driver data base from its default configuration + [DEFAULT_validateFrames] + + @Param[in] h_FmMacsecSecY FM MACSEC SECY module descriptor. + @Param[in] validateFrames Validation function mode + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_SECY_Config() and before FM_MACSEC_SECY_Init(); + +*//***************************************************************************/ +t_Error FM_MACSEC_SECY_ConfigValidationMode(t_Handle h_FmMacsecSecY, e_FmMacsecValidFrameBehavior validateFrames); + +/**************************************************************************//** + @Function FM_MACSEC_SECY_ConfigConfidentiality + + @Description Calling this routine changes the confidentiality settings in the + internal driver data base from its default configuration + [DEFAULT_confidentialityEnable], [DEFAULT_confidentialityOffset] + + @Param[in] h_FmMacsecSecY FM MACSEC SECY module descriptor. + @Param[in] confidentialityEnable TRUE - confidentiality protection and integrity protection + FALSE - no confidentiality protection, only integrity protection + @Param[in] confidentialityOffset The number of initial octets of each MSDU without confidentiality protection + common values are 0, 30, and 50 + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_SECY_Config() and before FM_MACSEC_SECY_Init(); + +*//***************************************************************************/ +t_Error FM_MACSEC_SECY_ConfigConfidentiality(t_Handle h_FmMacsecSecY, bool confidentialityEnable, uint16_t confidentialityOffset); + +/**************************************************************************//** + @Function FM_MACSEC_SECY_ConfigPointToPoint + + @Description configure this SecY to work in point-to-point mode, means that + it will have only one rx sc; + + @Param[in] h_FmMacsecSecY FM MACSEC SECY module descriptor. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_SECY_Config() and before FM_MACSEC_SECY_Init(); + Can be called only once in a system; only the first secY that will call this + routine will be able to operate in Point-To-Point mode. +*//***************************************************************************/ +t_Error FM_MACSEC_SECY_ConfigPointToPoint(t_Handle h_FmMacsecSecY); + +/**************************************************************************//** + @Function FM_MACSEC_SECY_ConfigException + + @Description Calling this routine changes the internal driver data base + from its default selection of exceptions enablement; + By default all exceptions are enabled. + + @Param[in] h_FmMacsecSecY FM MACSEC SECY module descriptor. + @Param[in] exception The exception to be selected. + @Param[in] enable TRUE to enable interrupt, FALSE to mask it. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_SECY_Config() and before FM_MACSEC_SECY_Init(). +*//***************************************************************************/ +t_Error FM_MACSEC_SECY_ConfigException(t_Handle h_FmMacsecSecY, e_FmMacsecSecYExceptions exception, bool enable); + +/**************************************************************************//** + @Function FM_MACSEC_SECY_ConfigEvent + + @Description Calling this routine changes the internal driver data base + from its default selection of events enablement; + By default all events are enabled. + + @Param[in] h_FmMacsecSecY FM MACSEC SECY module descriptor. + @Param[in] event The event to be selected. + @Param[in] enable TRUE to enable interrupt, FALSE to mask it. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_SECY_Config() and before FM_MACSEC_SECY_Init(). +*//***************************************************************************/ +t_Error FM_MACSEC_SECY_ConfigEvent(t_Handle h_FmMacsecSecY, e_FmMacsecSecYEvents event, bool enable); + +/** @} */ /* end of FM_MACSEC_SECY_advanced_init_grp group */ +/** @} */ /* end of FM_MACSEC_SECY_init_grp group */ + + +/**************************************************************************//** + @Group FM_MACSEC_SECY_runtime_control_grp FM-MACSEC SecY Runtime Control Unit + + @Description FM MACSEC SECY Runtime control unit API functions, definitions and enums. + + @{ +*//***************************************************************************/ + +/**************************************************************************//** + @Function FM_MACSEC_SECY_CreateRxSc + + @Description Create a receive secure channel. + + @Param[in] h_FmMacsecSecY FM MACSEC SECY module descriptor. + @Param[in] scParams secure channel params. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_SECY_Init(). +*//***************************************************************************/ +t_Handle FM_MACSEC_SECY_CreateRxSc(t_Handle h_FmMacsecSecY, t_FmMacsecSecYSCParams *p_ScParams); + +/**************************************************************************//** + @Function FM_MACSEC_SECY_DeleteRxSc + + @Description Deleting an initialized secure channel. + + @Param[in] h_FmMacsecSecY FM MACSEC SECY module descriptor. + @Param[in] h_Sc SC handle as returned by FM_MACSEC_SECY_CreateRxSc. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_SECY_CreateRxSc(). +*//***************************************************************************/ +t_Error FM_MACSEC_SECY_DeleteRxSc(t_Handle h_FmMacsecSecY, t_Handle h_Sc); + +/**************************************************************************//** + @Function FM_MACSEC_SECY_CreateRxSa + + @Description Create a receive secure association for the secure channel; + the SA cannot be used to receive frames until FM_MACSEC_SECY_RxSaEnableReceive is called. + + @Param[in] h_FmMacsecSecY FM MACSEC SECY module descriptor. + @Param[in] h_Sc SC handle as returned by FM_MACSEC_SECY_CreateRxSc. + @Param[in] an association number represent the SA. + @Param[in] lowestPn the lowest acceptable PN value for a received frame. + @Param[in] key the desired key for this SA. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_SECY_CreateRxSc(). +*//***************************************************************************/ +t_Error FM_MACSEC_SECY_CreateRxSa(t_Handle h_FmMacsecSecY, t_Handle h_Sc, macsecAN_t an, uint32_t lowestPn, macsecSAKey_t key); + +/**************************************************************************//** + @Function FM_MACSEC_SECY_DeleteRxSa + + @Description Deleting an initialized secure association. + + @Param[in] h_FmMacsecSecY FM MACSEC SECY module descriptor. + @Param[in] h_Sc SC handle as returned by FM_MACSEC_SECY_CreateRxSc. + @Param[in] an association number represent the SA. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_SECY_Init(). +*//***************************************************************************/ +t_Error FM_MACSEC_SECY_DeleteRxSa(t_Handle h_FmMacsecSecY, t_Handle h_Sc, macsecAN_t an); + +/**************************************************************************//** + @Function FM_MACSEC_SECY_RxSaEnableReceive + + @Description Enabling the SA to receive frames. + + @Param[in] h_FmMacsecSecY FM MACSEC SECY module descriptor. + @Param[in] h_Sc SC handle as returned by FM_MACSEC_SECY_CreateRxSc. + @Param[in] an association number represent the SA. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_SECY_CreateRxSa(). +*//***************************************************************************/ +t_Error FM_MACSEC_SECY_RxSaEnableReceive(t_Handle h_FmMacsecSecY, t_Handle h_Sc, macsecAN_t an); + +/**************************************************************************//** + @Function FM_MACSEC_SECY_RxSaDisableReceive + + @Description Disabling the SA from receive frames. + + @Param[in] h_FmMacsecSecY FM MACSEC SECY module descriptor. + @Param[in] h_Sc SC handle as returned by FM_MACSEC_SECY_CreateRxSc. + @Param[in] an association number represent the SA. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_SECY_CreateRxSa(). +*//***************************************************************************/ +t_Error FM_MACSEC_SECY_RxSaDisableReceive(t_Handle h_FmMacsecSecY, t_Handle h_Sc, macsecAN_t an); + +/**************************************************************************//** + @Function FM_MACSEC_SECY_RxSaUpdateNextPn + + @Description Update the next packet number expected on RX; + The value of nextPN shall be set to the greater of its existing value and the + supplied of updtNextPN (802.1AE-2006 10.7.15). + + @Param[in] h_FmMacsecSecY FM MACSEC SECY module descriptor. + @Param[in] h_Sc SC handle as returned by FM_MACSEC_SECY_CreateRxSc. + @Param[in] an association number represent the SA. + @Param[in] updtNextPN the next PN value for a received frame. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_SECY_CreateRxSa(). +*//***************************************************************************/ +t_Error FM_MACSEC_SECY_RxSaUpdateNextPn(t_Handle h_FmMacsecSecY, t_Handle h_Sc, macsecAN_t an, uint32_t updtNextPN); + +/**************************************************************************//** + @Function FM_MACSEC_SECY_RxSaUpdateLowestPn + + @Description Update the lowest packet number expected on RX; + The value of lowestPN shall be set to the greater of its existing value and the + supplied of updtLowestPN (802.1AE-2006 10.7.15). + + @Param[in] h_FmMacsecSecY FM MACSEC SECY module descriptor. + @Param[in] h_Sc SC handle as returned by FM_MACSEC_SECY_CreateRxSc. + @Param[in] an association number represent the SA. + @Param[in] updtLowestPN the lowest PN acceptable value for a received frame. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_SECY_CreateRxSa(). +*//***************************************************************************/ +t_Error FM_MACSEC_SECY_RxSaUpdateLowestPn(t_Handle h_FmMacsecSecY, t_Handle h_Sc, macsecAN_t an, uint32_t updtLowestPN); + +/**************************************************************************//** + @Function FM_MACSEC_SECY_RxSaModifyKey + + @Description Modify the current key of the SA with a new one. + + @Param[in] h_FmMacsecSecY FM MACSEC SECY module descriptor. + @Param[in] h_Sc SC handle as returned by FM_MACSEC_SECY_CreateRxSc. + @Param[in] an association number represent the SA. + @Param[in] key new key to replace the current key. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_SECY_CreateRxSa(). +*//***************************************************************************/ +t_Error FM_MACSEC_SECY_RxSaModifyKey(t_Handle h_FmMacsecSecY, t_Handle h_Sc, macsecAN_t an, macsecSAKey_t key); + +/**************************************************************************//** + @Function FM_MACSEC_SECY_CreateTxSa + + @Description Create a transmit secure association for the secure channel; + the SA cannot be used to transmit frames until FM_MACSEC_SECY_TxSaSetActivate is called; + Only one SA can be active at a time. + + @Param[in] h_FmMacsecSecY FM MACSEC SECY module descriptor. + @Param[in] an association number represent the SA. + @Param[in] key the desired key for this SA. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_SECY_Init(). +*//***************************************************************************/ +t_Error FM_MACSEC_SECY_CreateTxSa(t_Handle h_FmMacsecSecY, macsecAN_t an, macsecSAKey_t key); + +/**************************************************************************//** + @Function FM_MACSEC_SECY_DeleteTxSa + + @Description Deleting an initialized secure association. + + @Param[in] h_FmMacsecSecY FM MACSEC SECY module descriptor. + @Param[in] an association number represent the SA. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_SECY_Init(). +*//***************************************************************************/ +t_Error FM_MACSEC_SECY_DeleteTxSa(t_Handle h_FmMacsecSecY, macsecAN_t an); + +/**************************************************************************//** + @Function FM_MACSEC_SECY_TxSaModifyKey + + @Description Modify the key of the inactive SA with a new one. + + @Param[in] h_FmMacsecSecY FM MACSEC SECY module descriptor. + @Param[in] nextActiveAn association number represent the next SA to be activated. + @Param[in] key new key to replace the current key. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_SECY_Init(). +*//***************************************************************************/ +t_Error FM_MACSEC_SECY_TxSaModifyKey(t_Handle h_FmMacsecSecY, macsecAN_t nextActiveAn, macsecSAKey_t key); + +/**************************************************************************//** + @Function FM_MACSEC_SECY_TxSaSetActive + + @Description Set this SA to the active SA to be used on TX for SC; + only one SA can be active at a time. + + @Param[in] h_FmMacsecSecY FM MACSEC SECY module descriptor. + @Param[in] an association number represent the SA. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_SECY_Init(). +*//***************************************************************************/ +t_Error FM_MACSEC_SECY_TxSaSetActive(t_Handle h_FmMacsecSecY, macsecAN_t an); + +/**************************************************************************//** + @Function FM_MACSEC_SECY_TxSaGetActive + + @Description Get the active SA that being used for TX. + + @Param[in] h_FmMacsecSecY FM MACSEC SECY module descriptor. + @Param[out] p_An the active an. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_SECY_Init(). +*//***************************************************************************/ +t_Error FM_MACSEC_SECY_TxSaGetActive(t_Handle h_FmMacsecSecY, macsecAN_t *p_An); + +/**************************************************************************//** + @Function FM_MACSEC_SECY_GetStatistics + + @Description get all statistics counters. + + @Param[in] h_FmMacsecSecY FM MACSEC SECY module descriptor. + @Param[in] p_Statistics Structure with statistics. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_SECY_Init(). +*//***************************************************************************/ +t_Error FM_MACSEC_SECY_GetStatistics(t_Handle h_FmMacsecSecY, t_FmMacsecSecYStatistics *p_Statistics); + +/**************************************************************************//** + @Function FM_MACSEC_SECY_RxScGetStatistics + + @Description get all statistics counters. + + @Param[in] h_FmMacsecSecY FM MACSEC SECY module descriptor. + @Param[in] h_Sc Rx Sc handle. + @Param[in] p_Statistics Structure with statistics. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_SECY_Init(). +*//***************************************************************************/ +t_Error FM_MACSEC_SECY_RxScGetStatistics(t_Handle h_FmMacsecSecY, t_Handle h_Sc, t_FmMacsecSecYRxScStatistics *p_Statistics); + +/**************************************************************************//** + @Function FM_MACSEC_SECY_RxSaGetStatistics + + @Description get all statistics counters + + @Param[in] h_FmMacsecSecY FM MACSEC SECY module descriptor. + @Param[in] h_Sc Rx Sc handle. + @Param[in] an association number represent the SA. + @Param[in] p_Statistics Structure with statistics. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_SECY_Init(). +*//***************************************************************************/ +t_Error FM_MACSEC_SECY_RxSaGetStatistics(t_Handle h_FmMacsecSecY, t_Handle h_Sc, macsecAN_t an, t_FmMacsecSecYRxSaStatistics *p_Statistics); + +/**************************************************************************//** + @Function FM_MACSEC_SECY_TxScGetStatistics + + @Description get all statistics counters. + + @Param[in] h_FmMacsecSecY FM MACSEC SECY module descriptor. + @Param[in] p_Statistics Structure with statistics. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_SECY_Init(). +*//***************************************************************************/ +t_Error FM_MACSEC_SECY_TxScGetStatistics(t_Handle h_FmMacsecSecY, t_FmMacsecSecYTxScStatistics *p_Statistics); + +/**************************************************************************//** + @Function FM_MACSEC_SECY_TxSaGetStatistics + + @Description get all statistics counters. + + @Param[in] h_FmMacsecSecY FM MACSEC SECY module descriptor. + @Param[in] an association number represent the SA. + @Param[in] p_Statistics Structure with statistics. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_SECY_Init(). +*//***************************************************************************/ +t_Error FM_MACSEC_SECY_TxSaGetStatistics(t_Handle h_FmMacsecSecY, macsecAN_t an, t_FmMacsecSecYTxSaStatistics *p_Statistics); + +/**************************************************************************//** + @Function FM_MACSEC_SECY_SetException + + @Description Calling this routine enables/disables the specified exception. + + @Param[in] h_FmMacsecSecY FM MACSEC SECY module descriptor. + @Param[in] exception The exception to be selected. + @Param[in] enable TRUE to enable interrupt, FALSE to mask it. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_SECY_Init(). +*//***************************************************************************/ +t_Error FM_MACSEC_SECY_SetException(t_Handle h_FmMacsecSecY, e_FmMacsecExceptions exception, bool enable); + +/**************************************************************************//** + @Function FM_MACSEC_SECY_SetEvent + + @Description Calling this routine enables/disables the specified event. + + @Param[in] h_FmMacsecSecY FM MACSEC SECY module descriptor. + @Param[in] event The event to be selected. + @Param[in] enable TRUE to enable interrupt, FALSE to mask it. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_SECY_Config() and before FM_MACSEC_SECY_Init(). +*//***************************************************************************/ +t_Error FM_MACSEC_SECY_SetEvent(t_Handle h_FmMacsecSecY, e_FmMacsecSecYEvents event, bool enable); + +/**************************************************************************//** + @Function FM_MACSEC_SECY_GetRxScPhysId + + @Description return the physical id of the Secure Channel. + + @Param[in] h_FmMacsecSecY FM MACSEC SECY module descriptor. + @Param[in] h_Sc SC handle as returned by FM_MACSEC_SECY_CreateRxSc. + @Param[out] p_ScPhysId the SC physical id. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_SECY_CreateRxSc(). +*//***************************************************************************/ +t_Error FM_MACSEC_SECY_GetRxScPhysId(t_Handle h_FmMacsecSecY, t_Handle h_Sc, uint32_t *p_ScPhysId); + +/**************************************************************************//** + @Function FM_MACSEC_SECY_GetTxScPhysId + + @Description return the physical id of the Secure Channel. + + @Param[in] h_FmMacsecSecY FM MACSEC SECY module descriptor. + @Param[out] p_ScPhysId the SC physical id. + + @Return E_OK on success; Error code otherwise. + + @Cautions Allowed only following FM_MACSEC_SECY_Init(). +*//***************************************************************************/ +t_Error FM_MACSEC_SECY_GetTxScPhysId(t_Handle h_FmMacsecSecY, uint32_t *p_ScPhysId); + +/** @} */ /* end of FM_MACSEC_SECY_runtime_control_grp group */ +/** @} */ /* end of FM_MACSEC_SECY_grp group */ +/** @} */ /* end of FM_MACSEC_grp group */ +/** @} */ /* end of FM_grp group */ + + +#endif /* __FM_MACSEC_EXT_H */ |