diff options
Diffstat (limited to 'drivers/net/ethernet/freescale/sdk_fman/inc/etc/mm_ext.h')
-rw-r--r-- | drivers/net/ethernet/freescale/sdk_fman/inc/etc/mm_ext.h | 310 |
1 files changed, 310 insertions, 0 deletions
diff --git a/drivers/net/ethernet/freescale/sdk_fman/inc/etc/mm_ext.h b/drivers/net/ethernet/freescale/sdk_fman/inc/etc/mm_ext.h new file mode 100644 index 0000000..fa7c85e --- /dev/null +++ b/drivers/net/ethernet/freescale/sdk_fman/inc/etc/mm_ext.h @@ -0,0 +1,310 @@ +/* Copyright (c) 2008-2012 Freescale Semiconductor, Inc + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are met: + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * * Neither the name of Freescale Semiconductor nor the + * names of its contributors may be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * + * ALTERNATIVELY, this software may be distributed under the terms of the + * GNU General Public License ("GPL") as published by the Free Software + * Foundation, either version 2 of that License or (at your option) any + * later version. + * + * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY + * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED + * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY + * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES + * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + + +/**************************************************************************//** + @File mm_ext.h + + @Description Memory Manager Application Programming Interface +*//***************************************************************************/ +#ifndef __MM_EXT +#define __MM_EXT + +#include "std_ext.h" + +#define MM_MAX_ALIGNMENT 20 /* Alignments from 2 to 128 are available + where maximum alignment defined as + MM_MAX_ALIGNMENT power of 2 */ + +#define MM_MAX_NAME_LEN 32 + +/**************************************************************************//** + @Group etc_id Utility Library Application Programming Interface + + @Description External routines. + + @{ +*//***************************************************************************/ + +/**************************************************************************//** + @Group mm_grp Flexible Memory Manager + + @Description Flexible Memory Manager module functions,definitions and enums. + (All of the following functions,definitions and enums can be found in mm_ext.h) + + @{ +*//***************************************************************************/ + + +/**************************************************************************//** + @Function MM_Init + + @Description Initializes a new MM object. + + It initializes a new memory block consisting of base address + and size of the available memory by calling to MemBlock_Init + routine. It is also initializes a new free block for each + by calling FreeBlock_Init routine, which is pointed to + the almost all memory started from the required alignment + from the base address and to the end of the memory. + The handle to the new MM object is returned via "MM" + argument (passed by reference). + + @Param[in] h_MM - Handle to the MM object. + @Param[in] base - Base address of the MM. + @Param[in] size - Size of the MM. + + @Return E_OK is returned on success. E_NOMEMORY is returned if the new MM object or a new free block can not be initialized. +*//***************************************************************************/ +t_Error MM_Init(t_Handle *h_MM, uint64_t base, uint64_t size); + +/**************************************************************************//** + @Function MM_Get + + @Description Allocates a block of memory according to the given size and the alignment. + + The Alignment argument tells from which + free list allocate a block of memory. 2^alignment indicates + the alignment that the base address of the allocated block + should have. So, the only values 1, 2, 4, 8, 16, 32 and 64 + are available for the alignment argument. + The routine passes through the specific free list of free + blocks and seeks for a first block that have anough memory + that is required (best fit). + After the block is found and data is allocated, it calls + the internal MM_CutFree routine to update all free lists + do not include a just allocated block. Of course, each + free list contains a free blocks with the same alignment. + It is also creates a busy block that holds + information about an allocated block. + + @Param[in] h_MM - Handle to the MM object. + @Param[in] size - Size of the MM. + @Param[in] alignment - Index as a power of two defines a required + alignment (in bytes); Should be 1, 2, 4, 8, 16, 32 or 64 + @Param[in] name - The name that specifies an allocated block. + + @Return base address of an allocated block ILLEGAL_BASE if can't allocate a block +*//***************************************************************************/ +uint64_t MM_Get(t_Handle h_MM, uint64_t size, uint64_t alignment, char *name); + +/**************************************************************************//** + @Function MM_GetBase + + @Description Gets the base address of the required MM objects. + + @Param[in] h_MM - Handle to the MM object. + + @Return base address of the block. +*//***************************************************************************/ +uint64_t MM_GetBase(t_Handle h_MM); + +/**************************************************************************//** + @Function MM_GetForce + + @Description Force memory allocation. + + It means to allocate a block of memory of the given + size from the given base address. + The routine checks if the required block can be allocated + (that is it is free) and then, calls the internal MM_CutFree + routine to update all free lists do not include that block. + + @Param[in] h_MM - Handle to the MM object. + @Param[in] base - Base address of the MM. + @Param[in] size - Size of the MM. + @Param[in] name - Name that specifies an allocated block. + + @Return base address of an allocated block, ILLEGAL_BASE if can't allocate a block. +*//***************************************************************************/ +uint64_t MM_GetForce(t_Handle h_MM, uint64_t base, uint64_t size, char *name); + +/**************************************************************************//** + @Function MM_GetForceMin + + @Description Allocates a block of memory according to the given size, the alignment and minimum base address. + + The Alignment argument tells from which + free list allocate a block of memory. 2^alignment indicates + the alignment that the base address of the allocated block + should have. So, the only values 1, 2, 4, 8, 16, 32 and 64 + are available for the alignment argument. + The minimum baser address forces the location of the block + to be from a given address onward. + The routine passes through the specific free list of free + blocks and seeks for the first base address equal or smaller + than the required minimum address and end address larger than + than the required base + its size - i.e. that may contain + the required block. + After the block is found and data is allocated, it calls + the internal MM_CutFree routine to update all free lists + do not include a just allocated block. Of course, each + free list contains a free blocks with the same alignment. + It is also creates a busy block that holds + information about an allocated block. + + @Param[in] h_MM - Handle to the MM object. + @Param[in] size - Size of the MM. + @Param[in] alignment - Index as a power of two defines a required + alignment (in bytes); Should be 1, 2, 4, 8, 16, 32 or 64 + @Param[in] min - The minimum base address of the block. + @Param[in] name - Name that specifies an allocated block. + + @Return base address of an allocated block,ILLEGAL_BASE if can't allocate a block. +*//***************************************************************************/ +uint64_t MM_GetForceMin(t_Handle h_MM, + uint64_t size, + uint64_t alignment, + uint64_t min, + char *name); + +/**************************************************************************//** + @Function MM_Put + + @Description Puts a block of memory of the given base address back to the memory. + + It checks if there is a busy block with the + given base address. If not, it returns 0, that + means can't free a block. Otherwise, it gets parameters of + the busy block and after it updates lists of free blocks, + removes that busy block from the list by calling to MM_CutBusy + routine. + After that it calls to MM_AddFree routine to add a new free + block to the free lists. + + @Param[in] h_MM - Handle to the MM object. + @Param[in] base - Base address of the MM. + + @Return The size of bytes released, 0 if failed. +*//***************************************************************************/ +uint64_t MM_Put(t_Handle h_MM, uint64_t base); + +/**************************************************************************//** + @Function MM_PutForce + + @Description Releases a block of memory of the required size from the required base address. + + First, it calls to MM_CutBusy routine + to cut a free block from the busy list. And then, calls to + MM_AddFree routine to add the free block to the free lists. + + @Param[in] h_MM - Handle to the MM object. + @Param[in] base - Base address of of a block to free. + @Param[in] size - Size of a block to free. + + @Return The number of bytes released, 0 on failure. +*//***************************************************************************/ +uint64_t MM_PutForce(t_Handle h_MM, uint64_t base, uint64_t size); + +/**************************************************************************//** + @Function MM_Add + + @Description Adds a new memory block for memory allocation. + + When a new memory block is initialized and added to the + memory list, it calls to MM_AddFree routine to add the + new free block to the free lists. + + @Param[in] h_MM - Handle to the MM object. + @Param[in] base - Base address of the memory block. + @Param[in] size - Size of the memory block. + + @Return E_OK on success, otherwise returns an error code. +*//***************************************************************************/ +t_Error MM_Add(t_Handle h_MM, uint64_t base, uint64_t size); + +/**************************************************************************//** + @Function MM_Dump + + @Description Prints results of free and busy lists. + + @Param[in] h_MM - Handle to the MM object. +*//***************************************************************************/ +void MM_Dump(t_Handle h_MM); + +/**************************************************************************//** + @Function MM_Free + + @Description Releases memory allocated for MM object. + + @Param[in] h_MM - Handle of the MM object. +*//***************************************************************************/ +void MM_Free(t_Handle h_MM); + +/**************************************************************************//** + @Function MM_GetMemBlock + + @Description Returns base address of the memory block specified by the index. + + If index is 0, returns base address + of the first memory block, 1 - returns base address + of the second memory block, etc. + Note, those memory blocks are allocated by the + application before MM_Init or MM_Add and have to + be released by the application before or after invoking + the MM_Free routine. + + @Param[in] h_MM - Handle to the MM object. + @Param[in] index - Index of the memory block. + + @Return valid base address or ILLEGAL_BASE if no memory block specified by the index. +*//***************************************************************************/ +uint64_t MM_GetMemBlock(t_Handle h_MM, int index); + +/**************************************************************************//** + @Function MM_InRange + + @Description Checks if a specific address is in the memory range of the passed MM object. + + @Param[in] h_MM - Handle to the MM object. + @Param[in] addr - The address to be checked. + + @Return TRUE if the address is in the address range of the block, FALSE otherwise. +*//***************************************************************************/ +bool MM_InRange(t_Handle h_MM, uint64_t addr); + +/**************************************************************************//** + @Function MM_GetFreeMemSize + + @Description Returns the size (in bytes) of free memory. + + @Param[in] h_MM - Handle to the MM object. + + @Return Free memory size in bytes. +*//***************************************************************************/ +uint64_t MM_GetFreeMemSize(t_Handle h_MM); + + +/** @} */ /* end of mm_grp group */ +/** @} */ /* end of etc_id group */ + +#endif /* __MM_EXT_H */ |