diff options
Diffstat (limited to 'drivers/net/ibm_newemac/core.h')
-rw-r--r-- | drivers/net/ibm_newemac/core.h | 355 |
1 files changed, 355 insertions, 0 deletions
diff --git a/drivers/net/ibm_newemac/core.h b/drivers/net/ibm_newemac/core.h new file mode 100644 index 0000000..4011803 --- /dev/null +++ b/drivers/net/ibm_newemac/core.h @@ -0,0 +1,355 @@ +/* + * drivers/net/ibm_newemac/core.h + * + * Driver for PowerPC 4xx on-chip ethernet controller. + * + * Copyright (c) 2004, 2005 Zultys Technologies. + * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> + * + * Based on original work by + * Armin Kuster <akuster@mvista.com> + * Johnnie Peters <jpeters@mvista.com> + * Copyright 2000, 2001 MontaVista Softare Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#ifndef __IBM_NEWEMAC_CORE_H +#define __IBM_NEWEMAC_CORE_H + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/list.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/netdevice.h> +#include <linux/dma-mapping.h> +#include <linux/spinlock.h> + +#include <asm/of_platform.h> +#include <asm/io.h> +#include <asm/dcr.h> + +#include "emac.h" +#include "phy.h" +#include "zmii.h" +#include "rgmii.h" +#include "mal.h" +#include "tah.h" +#include "debug.h" + +#define NUM_TX_BUFF CONFIG_IBM_NEW_EMAC_TXB +#define NUM_RX_BUFF CONFIG_IBM_NEW_EMAC_RXB + +/* Simple sanity check */ +#if NUM_TX_BUFF > 256 || NUM_RX_BUFF > 256 +#error Invalid number of buffer descriptors (greater than 256) +#endif + +#define EMAC_MIN_MTU 46 + +/* Maximum L2 header length (VLAN tagged, no FCS) */ +#define EMAC_MTU_OVERHEAD (6 * 2 + 2 + 4) + +/* RX BD size for the given MTU */ +static inline int emac_rx_size(int mtu) +{ + if (mtu > ETH_DATA_LEN) + return MAL_MAX_RX_SIZE; + else + return mal_rx_size(ETH_DATA_LEN + EMAC_MTU_OVERHEAD); +} + +#define EMAC_DMA_ALIGN(x) ALIGN((x), dma_get_cache_alignment()) + +#define EMAC_RX_SKB_HEADROOM \ + EMAC_DMA_ALIGN(CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM) + +/* Size of RX skb for the given MTU */ +static inline int emac_rx_skb_size(int mtu) +{ + int size = max(mtu + EMAC_MTU_OVERHEAD, emac_rx_size(mtu)); + return EMAC_DMA_ALIGN(size + 2) + EMAC_RX_SKB_HEADROOM; +} + +/* RX DMA sync size */ +static inline int emac_rx_sync_size(int mtu) +{ + return EMAC_DMA_ALIGN(emac_rx_size(mtu) + 2); +} + +/* Driver statistcs is split into two parts to make it more cache friendly: + * - normal statistics (packet count, etc) + * - error statistics + * + * When statistics is requested by ethtool, these parts are concatenated, + * normal one goes first. + * + * Please, keep these structures in sync with emac_stats_keys. + */ + +/* Normal TX/RX Statistics */ +struct emac_stats { + u64 rx_packets; + u64 rx_bytes; + u64 tx_packets; + u64 tx_bytes; + u64 rx_packets_csum; + u64 tx_packets_csum; +}; + +/* Error statistics */ +struct emac_error_stats { + u64 tx_undo; + + /* Software RX Errors */ + u64 rx_dropped_stack; + u64 rx_dropped_oom; + u64 rx_dropped_error; + u64 rx_dropped_resize; + u64 rx_dropped_mtu; + u64 rx_stopped; + /* BD reported RX errors */ + u64 rx_bd_errors; + u64 rx_bd_overrun; + u64 rx_bd_bad_packet; + u64 rx_bd_runt_packet; + u64 rx_bd_short_event; + u64 rx_bd_alignment_error; + u64 rx_bd_bad_fcs; + u64 rx_bd_packet_too_long; + u64 rx_bd_out_of_range; + u64 rx_bd_in_range; + /* EMAC IRQ reported RX errors */ + u64 rx_parity; + u64 rx_fifo_overrun; + u64 rx_overrun; + u64 rx_bad_packet; + u64 rx_runt_packet; + u64 rx_short_event; + u64 rx_alignment_error; + u64 rx_bad_fcs; + u64 rx_packet_too_long; + u64 rx_out_of_range; + u64 rx_in_range; + + /* Software TX Errors */ + u64 tx_dropped; + /* BD reported TX errors */ + u64 tx_bd_errors; + u64 tx_bd_bad_fcs; + u64 tx_bd_carrier_loss; + u64 tx_bd_excessive_deferral; + u64 tx_bd_excessive_collisions; + u64 tx_bd_late_collision; + u64 tx_bd_multple_collisions; + u64 tx_bd_single_collision; + u64 tx_bd_underrun; + u64 tx_bd_sqe; + /* EMAC IRQ reported TX errors */ + u64 tx_parity; + u64 tx_underrun; + u64 tx_sqe; + u64 tx_errors; +}; + +#define EMAC_ETHTOOL_STATS_COUNT ((sizeof(struct emac_stats) + \ + sizeof(struct emac_error_stats)) \ + / sizeof(u64)) + +struct emac_instance { + struct net_device *ndev; + struct resource rsrc_regs; + struct emac_regs __iomem *emacp; + struct of_device *ofdev; + struct device_node **blist; /* bootlist entry */ + + /* MAL linkage */ + u32 mal_ph; + struct of_device *mal_dev; + u32 mal_rx_chan; + u32 mal_tx_chan; + struct mal_instance *mal; + struct mal_commac commac; + + /* PHY infos */ + u32 phy_mode; + u32 phy_map; + u32 phy_address; + u32 phy_feat_exc; + struct mii_phy phy; + struct mutex link_lock; + struct delayed_work link_work; + int link_polling; + + /* Shared MDIO if any */ + u32 mdio_ph; + struct of_device *mdio_dev; + struct emac_instance *mdio_instance; + struct mutex mdio_lock; + + /* ZMII infos if any */ + u32 zmii_ph; + u32 zmii_port; + struct of_device *zmii_dev; + + /* RGMII infos if any */ + u32 rgmii_ph; + u32 rgmii_port; + struct of_device *rgmii_dev; + + /* TAH infos if any */ + u32 tah_ph; + u32 tah_port; + struct of_device *tah_dev; + + /* IRQs */ + int wol_irq; + int emac_irq; + + /* OPB bus frequency in Mhz */ + u32 opb_bus_freq; + + /* Cell index within an ASIC (for clk mgmnt) */ + u32 cell_index; + + /* Max supported MTU */ + u32 max_mtu; + + /* Feature bits (from probe table) */ + unsigned int features; + + /* Tx and Rx fifo sizes & other infos in bytes */ + u32 tx_fifo_size; + u32 tx_fifo_size_gige; + u32 rx_fifo_size; + u32 rx_fifo_size_gige; + u32 fifo_entry_size; + u32 mal_burst_size; /* move to MAL ? */ + + /* Descriptor management + */ + struct mal_descriptor *tx_desc; + int tx_cnt; + int tx_slot; + int ack_slot; + + struct mal_descriptor *rx_desc; + int rx_slot; + struct sk_buff *rx_sg_skb; /* 1 */ + int rx_skb_size; + int rx_sync_size; + + struct sk_buff *tx_skb[NUM_TX_BUFF]; + struct sk_buff *rx_skb[NUM_RX_BUFF]; + + /* Stats + */ + struct emac_error_stats estats; + struct net_device_stats nstats; + struct emac_stats stats; + + /* Misc + */ + int reset_failed; + int stop_timeout; /* in us */ + int no_mcast; + int mcast_pending; + struct work_struct reset_work; + spinlock_t lock; +}; + +/* + * Features of various EMAC implementations + */ + +/* + * No flow control on 40x according to the original driver + */ +#define EMAC_FTR_NO_FLOW_CONTROL_40x 0x00000001 +/* + * Cell is an EMAC4 + */ +#define EMAC_FTR_EMAC4 0x00000002 +/* + * For the 440SPe, AMCC inexplicably changed the polarity of + * the "operation complete" bit in the MII control register. + */ +#define EMAC_FTR_STACR_OC_INVERT 0x00000004 +/* + * Set if we have a TAH. + */ +#define EMAC_FTR_HAS_TAH 0x00000008 +/* + * Set if we have a ZMII. + */ +#define EMAC_FTR_HAS_ZMII 0x00000010 +/* + * Set if we have a RGMII. + */ +#define EMAC_FTR_HAS_RGMII 0x00000020 +/* + * Set if we have axon-type STACR + */ +#define EMAC_FTR_HAS_AXON_STACR 0x00000040 + + +/* Right now, we don't quite handle the always/possible masks on the + * most optimal way as we don't have a way to say something like + * always EMAC4. Patches welcome. + */ +enum { + EMAC_FTRS_ALWAYS = 0, + + EMAC_FTRS_POSSIBLE = +#ifdef CONFIG_IBM_NEW_EMAC_EMAC4 + EMAC_FTR_EMAC4 | EMAC_FTR_HAS_AXON_STACR | + EMAC_FTR_STACR_OC_INVERT | +#endif +#ifdef CONFIG_IBM_NEW_EMAC_TAH + EMAC_FTR_HAS_TAH | +#endif +#ifdef CONFIG_IBM_NEW_EMAC_ZMII + EMAC_FTR_HAS_ZMII | +#endif +#ifdef CONFIG_IBM_NEW_EMAC_RGMII + EMAC_FTR_HAS_RGMII | +#endif + 0, +}; + +static inline int emac_has_feature(struct emac_instance *dev, + unsigned long feature) +{ + return (EMAC_FTRS_ALWAYS & feature) || + (EMAC_FTRS_POSSIBLE & dev->features & feature); +} + + +/* Ethtool get_regs complex data. + * We want to get not just EMAC registers, but also MAL, ZMII, RGMII, TAH + * when available. + * + * Returned BLOB consists of the ibm_emac_ethtool_regs_hdr, + * MAL registers, EMAC registers and optional ZMII, RGMII, TAH registers. + * Each register component is preceded with emac_ethtool_regs_subhdr. + * Order of the optional headers follows their relative bit posititions + * in emac_ethtool_regs_hdr.components + */ +#define EMAC_ETHTOOL_REGS_ZMII 0x00000001 +#define EMAC_ETHTOOL_REGS_RGMII 0x00000002 +#define EMAC_ETHTOOL_REGS_TAH 0x00000004 + +struct emac_ethtool_regs_hdr { + u32 components; +}; + +struct emac_ethtool_regs_subhdr { + u32 version; + u32 index; +}; + +#endif /* __IBM_NEWEMAC_CORE_H */ |