diff options
Diffstat (limited to 'drivers/net/stmmac/stmmac_main.c')
| -rw-r--r-- | drivers/net/stmmac/stmmac_main.c | 66 |
1 files changed, 32 insertions, 34 deletions
diff --git a/drivers/net/stmmac/stmmac_main.c b/drivers/net/stmmac/stmmac_main.c index a169b14..a908f72 100644 --- a/drivers/net/stmmac/stmmac_main.c +++ b/drivers/net/stmmac/stmmac_main.c @@ -134,13 +134,6 @@ static int buf_sz = DMA_BUFFER_SIZE; module_param(buf_sz, int, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(buf_sz, "DMA buffer size"); -/* In case of Giga ETH, we can enable/disable the COE for the - * transmit HW checksum computation. - * Note that, if tx csum is off in HW, SG will be still supported. */ -static int tx_coe = HW_CSUM; -module_param(tx_coe, int, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(tx_coe, "GMAC COE type 2 [on/off]"); - static const u32 default_msg_level = (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN | NETIF_MSG_TIMER); @@ -569,29 +562,22 @@ static void free_dma_desc_resources(struct stmmac_priv *priv) * stmmac_dma_operation_mode - HW DMA operation mode * @priv : pointer to the private device structure. * Description: it sets the DMA operation mode: tx/rx DMA thresholds - * or Store-And-Forward capability. It also verifies the COE for the - * transmission in case of Giga ETH. + * or Store-And-Forward capability. */ static void stmmac_dma_operation_mode(struct stmmac_priv *priv) { - if (!priv->is_gmac) { - /* MAC 10/100 */ - priv->hw->dma->dma_mode(priv->ioaddr, tc, 0); - priv->tx_coe = NO_HW_CSUM; - } else { - if ((priv->dev->mtu <= ETH_DATA_LEN) && (tx_coe)) { - priv->hw->dma->dma_mode(priv->ioaddr, - SF_DMA_MODE, SF_DMA_MODE); - tc = SF_DMA_MODE; - priv->tx_coe = HW_CSUM; - } else { - /* Checksum computation is performed in software. */ - priv->hw->dma->dma_mode(priv->ioaddr, tc, - SF_DMA_MODE); - priv->tx_coe = NO_HW_CSUM; - } - } - tx_coe = priv->tx_coe; + if (likely((priv->tx_coe) && (!priv->no_csum_insertion))) { + /* In case of GMAC, SF mode has to be enabled + * to perform the TX COE. This depends on: + * 1) TX COE if actually supported + * 2) There is no bugged Jumbo frame support + * that needs to not insert csum in the TDES. + */ + priv->hw->dma->dma_mode(priv->ioaddr, + SF_DMA_MODE, SF_DMA_MODE); + tc = SF_DMA_MODE; + } else + priv->hw->dma->dma_mode(priv->ioaddr, tc, SF_DMA_MODE); } /** @@ -858,6 +844,12 @@ static int stmmac_open(struct net_device *dev) /* Initialize the MAC Core */ priv->hw->mac->core_init(priv->ioaddr); + priv->rx_coe = priv->hw->mac->rx_coe(priv->ioaddr); + if (priv->rx_coe) + pr_info("stmmac: Rx Checksum Offload Engine supported\n"); + if (priv->tx_coe) + pr_info("\tTX Checksum insertion supported\n"); + priv->shutdown = 0; /* Initialise the MMC (if present) to disable all interrupts. */ @@ -1066,7 +1058,7 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev) return stmmac_sw_tso(priv, skb); if (likely((skb->ip_summed == CHECKSUM_PARTIAL))) { - if (likely(priv->tx_coe == NO_HW_CSUM)) + if (unlikely((!priv->tx_coe) || (priv->no_csum_insertion))) skb_checksum_help(skb); else csum_insertion = 1; @@ -1390,6 +1382,15 @@ static int stmmac_change_mtu(struct net_device *dev, int new_mtu) return -EINVAL; } + /* Some GMAC devices have a bugged Jumbo frame support that + * needs to have the Tx COE disabled for oversized frames + * (due to limited buffer sizes). In this case we disable + * the TX csum insertionin the TDES and not use SF. */ + if ((priv->bugged_jumbo) && (priv->dev->mtu > ETH_DATA_LEN)) + priv->no_csum_insertion = 1; + else + priv->no_csum_insertion = 0; + dev->mtu = new_mtu; return 0; @@ -1510,9 +1511,6 @@ static int stmmac_probe(struct net_device *dev) #endif priv->msg_enable = netif_msg_init(debug, default_msg_level); - if (priv->is_gmac) - priv->rx_csum = 1; - if (flow_ctrl) priv->flow_ctrl = FLOW_AUTO; /* RX/TX pause on */ @@ -1662,7 +1660,7 @@ static int stmmac_dvr_probe(struct platform_device *pdev) ret = -ENODEV; goto out; } - pr_info("done!\n"); + pr_info("\tdone!\n"); if (!request_mem_region(res->start, resource_size(res), pdev->name)) { @@ -1705,6 +1703,8 @@ static int stmmac_dvr_probe(struct platform_device *pdev) priv->bus_id = plat_dat->bus_id; priv->pbl = plat_dat->pbl; /* TLI */ priv->mii_clk_csr = plat_dat->clk_csr; + priv->tx_coe = plat_dat->tx_coe; + priv->bugged_jumbo = plat_dat->bugged_jumbo; priv->is_gmac = plat_dat->has_gmac; /* GMAC is on board */ priv->enh_desc = plat_dat->enh_desc; priv->ioaddr = addr; @@ -1966,8 +1966,6 @@ static int __init stmmac_cmdline_opt(char *str) strict_strtoul(opt + 7, 0, (unsigned long *)&buf_sz); else if (!strncmp(opt, "tc:", 3)) strict_strtoul(opt + 3, 0, (unsigned long *)&tc); - else if (!strncmp(opt, "tx_coe:", 7)) - strict_strtoul(opt + 7, 0, (unsigned long *)&tx_coe); else if (!strncmp(opt, "watchdog:", 9)) strict_strtoul(opt + 9, 0, (unsigned long *)&watchdog); else if (!strncmp(opt, "flow_ctrl:", 10)) |